diff options
Diffstat (limited to 'arch/arm')
43 files changed, 634 insertions, 420 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c6187..0063845d208 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -936,6 +936,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" + depends on MMU select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c0a8c..cdcb98c7e07 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,9 +61,9 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c58798..9d8abf0938e 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -74,15 +74,15 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d13728..9b1c13a16c2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -147,11 +147,11 @@ }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 11828e63253..d3c29b377af 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -196,6 +196,7 @@ CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 768b3c06021..cf5f573eb5f 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -30,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d74c5cddb98..3bb8e56969a 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -91,8 +91,8 @@ static void __init edb93xx_register_i2c(void) ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { + } else if (machine_is_edb9302() || machine_is_edb9307() + || machine_is_edb9312() || machine_is_edb9315()) { ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 9a7b08b2a92..0f71f82101c 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -11,7 +11,7 @@ #include <linux/gpio.h> #include <mach/iomux-mx28.h> -#include "../devices-mx28.h" +#include "devices-mx28.h" #include "module-tx28.h" diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4cf5142f22c..2f4ace6f91d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -35,6 +35,7 @@ config ARCH_OMAP3 select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select ARM_CPU_SUSPEND if PM select MULTI_IRQ_HANDLER @@ -52,6 +53,7 @@ config ARCH_OMAP4 select PL310_ERRATA_727915 select ARM_ERRATA_720789 select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c262..6be43ac5c35 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -66,9 +66,7 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o @@ -82,6 +80,11 @@ endif endif +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +endif + # PRCM obj-y += prm_common.o obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 447682c4e11..2c90ac68668 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -15,27 +15,13 @@ * General Public License for more details. */ -#include <linux/clk.h> +#include <linux/err.h> #include <linux/davinci_emac.h> -#include <linux/platform_device.h> -#include <plat/irqs.h> +#include <asm/system.h> +#include <plat/omap_device.h> #include <mach/am35xx.h> - #include "control.h" - -static struct mdio_platform_data am35xx_emac_mdio_pdata; - -static struct resource am35xx_emac_mdio_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), -}; - -static struct platform_device am35xx_emac_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), - .resource = am35xx_emac_mdio_resources, - .dev.platform_data = &am35xx_emac_mdio_pdata, -}; +#include "am35xx-emac.h" static void am35xx_enable_emac_int(void) { @@ -69,41 +55,57 @@ static struct emac_platform_data am35xx_emac_pdata = { .interrupt_disable = am35xx_disable_emac_int, }; -static struct resource am35xx_emac_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), -}; +static struct mdio_platform_data am35xx_mdio_pdata; -static struct platform_device am35xx_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am35xx_emac_resources), - .resource = am35xx_emac_resources, - .dev = { - .platform_data = &am35xx_emac_pdata, - }, -}; +static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, + void *pdata, int pdata_len) +{ + struct platform_device *pdev; + + pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, + NULL, 0, false); + if (IS_ERR(pdev)) { + WARN(1, "Can't build omap_device for %s:%s.\n", + oh->class->name, oh->name); + return PTR_ERR(pdev); + } + + return 0; +} void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { + struct omap_hwmod *oh; u32 v; - int err; + int ret; - am35xx_emac_pdata.rmii_en = rmii_en; - am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; - err = platform_device_register(&am35xx_emac_device); - if (err) { - pr_err("AM35x: failed registering EMAC device: %d\n", err); + oh = omap_hwmod_lookup("davinci_mdio"); + if (!oh) { + pr_err("Could not find davinci_mdio hwmod\n"); + return; + } + + am35xx_mdio_pdata.bus_freq = mdio_bus_freq; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, + sizeof(am35xx_mdio_pdata)); + if (ret) { + pr_err("Could not build davinci_mdio hwmod device\n"); return; } - err = platform_device_register(&am35xx_emac_mdio_device); - if (err) { - pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); - platform_device_unregister(&am35xx_emac_device); + oh = omap_hwmod_lookup("davinci_emac"); + if (!oh) { + pr_err("Could not find davinci_emac hwmod\n"); + return; + } + + am35xx_emac_pdata.rmii_en = rmii_en; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, + sizeof(am35xx_emac_pdata)); + if (ret) { + pr_err("Could not build davinci_emac hwmod device\n"); return; } diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99ca6bad5c3..0dac4db0113 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -218,9 +218,6 @@ static struct twl4030_gpio_platform_data sdp2430_gpio_data = { }; static struct twl4030_platform_data sdp2430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, .vmmc1 = &sdp2430_vmmc1, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 580fd17208d..6202fc76e49 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -433,7 +433,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 932e1778aff..fca93d1afd4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -93,9 +93,6 @@ static struct twl4030_usb_data omap3logic_usb_data = { static struct twl4030_platform_data omap3logic_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1efdec236ae..a67aaa97dcd 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2490,13 +2490,13 @@ static struct clk uart4_fck = { }; static struct clk uart4_fck_am35xx = { - .name = "uart4_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = AM35XX_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, }; static struct clk gpt2_fck = { @@ -3201,8 +3201,12 @@ static struct clk vpfe_fck = { }; /* - * The UART1/2 functional clock acts as the functional - * clock for UART4. No separate fclk control available. + * The UART1/2 functional clock acts as the functional clock for + * UART4. No separate fclk control available. XXX Well now we have a + * uart4_fck that is apparently used as the UART4 functional clock, + * but it also seems that uart1_fck or uart2_fck are still needed, at + * least for UART4 softresets to complete. This really needs + * clarification. */ static struct clk uart4_ick_am35xx = { .name = "uart4_ick", @@ -3474,12 +3478,12 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 6038adb9771..8e35080026d 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -59,6 +59,12 @@ static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep gfx_sgx_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep per_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -69,6 +75,14 @@ static struct clkdm_dep per_wkdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep usbhost_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -79,6 +93,14 @@ static struct clkdm_dep usbhost_wkdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -89,6 +111,14 @@ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep mpu_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ static struct clkdm_dep iva2_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -116,6 +146,12 @@ static struct clkdm_dep dss_wkdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_NEON: MPU */ static struct clkdm_dep neon_wkdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -131,6 +167,11 @@ static struct clkdm_dep dss_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_PER: MPU, IVA */ static struct clkdm_dep per_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -138,6 +179,11 @@ static struct clkdm_dep per_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ static struct clkdm_dep usbhost_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -145,6 +191,11 @@ static struct clkdm_dep usbhost_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_CAM: MPU */ static struct clkdm_dep cam_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -175,6 +226,15 @@ static struct clockdomain mpu_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, }; +static struct clockdomain mpu_am35x_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_am35x_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, +}; + static struct clockdomain neon_clkdm = { .name = "neon_clkdm", .pwrdm = { .name = "neon_pwrdm" }, @@ -210,6 +270,15 @@ static struct clockdomain sgx_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, }; +static struct clockdomain sgx_am35x_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_am35x_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, +}; + /* * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but * then that information was removed from the 34xx ES2+ TRM. It is @@ -261,6 +330,16 @@ static struct clockdomain dss_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, }; +static struct clockdomain dss_am35x_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = dss_am35x_wkdeps, + .sleepdep_srcs = dss_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, +}; + static struct clockdomain cam_clkdm = { .name = "cam_clkdm", .pwrdm = { .name = "cam_pwrdm" }, @@ -279,6 +358,15 @@ static struct clockdomain usbhost_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, }; +static struct clockdomain usbhost_am35x_clkdm = { + .name = "usbhost_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = usbhost_am35x_wkdeps, + .sleepdep_srcs = usbhost_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, +}; + static struct clockdomain per_clkdm = { .name = "per_clkdm", .pwrdm = { .name = "per_pwrdm" }, @@ -289,6 +377,16 @@ static struct clockdomain per_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, }; +static struct clockdomain per_am35x_clkdm = { + .name = "per_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_am35x_wkdeps, + .sleepdep_srcs = per_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, +}; + /* * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is * switched of even if sdti is in use @@ -341,31 +439,44 @@ static struct clkdm_autodep clkdm_autodeps[] = { } }; +static struct clkdm_autodep clkdm_am35x_autodeps[] = { + { + .clkdm = { .name = "mpu_clkdm" }, + }, + { + .clkdm = { .name = NULL }, + } +}; + /* * */ -static struct clockdomain *clockdomains_omap3430_common[] __initdata = { +static struct clockdomain *clockdomains_common[] __initdata = { &wkup_common_clkdm, &cm_common_clkdm, &prm_common_clkdm, - &mpu_3xxx_clkdm, &neon_clkdm, - &iva2_clkdm, - &d2d_clkdm, &core_l3_3xxx_clkdm, &core_l4_3xxx_clkdm, - &dss_3xxx_clkdm, - &cam_clkdm, - &per_clkdm, &emu_clkdm, &dpll1_clkdm, - &dpll2_clkdm, &dpll3_clkdm, &dpll4_clkdm, NULL }; +static struct clockdomain *clockdomains_omap3430[] __initdata = { + &mpu_3xxx_clkdm, + &iva2_clkdm, + &d2d_clkdm, + &dss_3xxx_clkdm, + &cam_clkdm, + &per_clkdm, + &dpll2_clkdm, + NULL +}; + static struct clockdomain *clockdomains_omap3430es1[] __initdata = { &gfx_3430es1_clkdm, NULL, @@ -378,21 +489,41 @@ static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = { NULL, }; +static struct clockdomain *clockdomains_am35x[] __initdata = { + &mpu_am35x_clkdm, + &sgx_am35x_clkdm, + &dss_am35x_clkdm, + &per_am35x_clkdm, + &usbhost_am35x_clkdm, + &dpll5_clkdm, + NULL +}; + void __init omap3xxx_clockdomains_init(void) { struct clockdomain **sc; + unsigned int rev; if (!cpu_is_omap34xx()) return; clkdm_register_platform_funcs(&omap3_clkdm_operations); - clkdm_register_clkdms(clockdomains_omap3430_common); + clkdm_register_clkdms(clockdomains_common); - sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 : - clockdomains_omap3430es2plus; + rev = omap_rev(); - clkdm_register_clkdms(sc); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + clkdm_register_clkdms(clockdomains_am35x); + clkdm_register_autodeps(clkdm_am35x_autodeps); + } else { + clkdm_register_clkdms(clockdomains_omap3430); + + sc = (rev == OMAP3430_REV_ES1_0) ? + clockdomains_omap3430es1 : clockdomains_omap3430es2plus; + + clkdm_register_clkdms(sc); + clkdm_register_autodeps(clkdm_autodeps); + } - clkdm_register_autodeps(clkdm_autodeps); clkdm_complete_init(); } diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 8083a8cdc55..766338fe4d3 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -169,8 +169,6 @@ /* AM35XX specific CM_ICLKEN1_CORE bits */ #define AM35XX_EN_IPSS_MASK (1 << 4) #define AM35XX_EN_IPSS_SHIFT 4 -#define AM35XX_EN_UART4_MASK (1 << 23) -#define AM35XX_EN_UART4_SHIFT 23 /* CM_ICLKEN2_CORE */ #define OMAP3430_EN_PKA_MASK (1 << 4) @@ -207,6 +205,8 @@ #define OMAP3430_ST_DES2_MASK (1 << 26) #define OMAP3430_ST_MSPRO_SHIFT 23 #define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define AM35XX_ST_UART4_SHIFT 23 +#define AM35XX_ST_UART4_MASK (1 << 23) #define OMAP3430_ST_HDQ_SHIFT 22 #define OMAP3430_ST_HDQ_MASK (1 << 22) #define OMAP3430ES1_ST_FAC_SHIFT 8 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1706ebcec08..c1875862679 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -63,28 +63,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - if (board_pdata && board_pdata->get_pendown_state) { - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } - gpio_export(gpio_pendown, 0); - - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; } + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + if (board_pdata->get_pendown_state) + gpio_export(gpio_pendown, 0); } else { ads7846_config.gpio_pendown = gpio_pendown; } + if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) + gpio_free(gpio_pendown); + spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 207bc1c7759..31344528eb5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,8 +36,6 @@ #include "control.h" #include "common.h" -#ifdef CONFIG_CPU_IDLE - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; @@ -379,9 +377,3 @@ int __init omap3_idle_init(void) return 0; } -#else -int __init omap3_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index be1617ca84b..02d15bbd4e3 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -22,8 +22,6 @@ #include "pm.h" #include "prm.h" -#ifdef CONFIG_CPU_IDLE - /* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; @@ -199,9 +197,3 @@ int __init omap4_idle_init(void) return 0; } -#else -int __init omap4_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index f1e13d1ca5e..95594495fcf 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -36,6 +36,8 @@ #define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) #define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) #define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ + AM35XX_EMAC_MDIO_OFFSET) #define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) #define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ AM3517_EMAC_CNTRL_RAM_OFFSET) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6038a8c84b7..4c35366c7e4 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -262,7 +262,7 @@ int __init omap_intc_of_init(struct device_node *node, struct device_node *parent) { struct resource res; - u32 nr_irqs = 96; + u32 nr_irq = 96; if (WARN_ON(!node)) return -ENODEV; @@ -272,10 +272,10 @@ int __init omap_intc_of_init(struct device_node *node, return -EINVAL; } - if (of_property_read_u32(node, "ti,intc-size", &nr_irqs)) - pr_warn("unable to get intc-size, default to %d\n", nr_irqs); + if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) + pr_warn("unable to get intc-size, default to %d\n", nr_irq); - omap_init_irq(res.start, nr_irqs, of_node_get(node)); + omap_init_irq(res.start, nr_irq, of_node_get(node)); return 0; } diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 19b8b677486..6875be837d9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -83,8 +83,6 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) l = mbox_read_reg(MAILBOX_REVISION); pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - omap2_mbox_enable_irq(mbox, IRQ_RX); - return 0; } diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index ac49384d028..1be8bcb52e9 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -73,19 +73,17 @@ static struct iommu_device omap4_devices[] = { .da_end = 0xFFFFF000, }, }, -#if defined(CONFIG_MPU_TESLA_IOMMU) { .base = OMAP4_MMU2_BASE, - .irq = INT_44XX_DSP_MMU, + .irq = OMAP44XX_IRQ_TESLA_MMU, .pdata = { .name = "tesla", .nr_tlb_entries = 32, - .clk_name = "tesla_ick", + .clk_name = "dsp_fck", .da_start = 0x0, .da_end = 0xFFFFF000, }, }, -#endif }; #define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b26d3c9bca1..a8653af1969 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -527,11 +527,27 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { { .irq = INT_35XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, + { .dma_req = -1 } +}; + +/* + * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or + * uart2_fck being enabled. So we add uart1_fck as an optional clock, + * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really + * should not be needed. The functional clock structure of the AM35xx + * UART4 is extremely unclear and opaque; it is unclear what the role + * of uart1/2_fck is for the UART4. Any clarification from either + * empirical testing or the AM3505/3517 hardware designers would be + * most welcome. + */ +static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { + { .role = "softreset_uart1_fck", .clk = "uart1_fck" }, }; static struct omap_hwmod am35xx_uart4_hwmod = { @@ -543,11 +559,14 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART4_SHIFT, + .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, }, + .opt_clks = am35xx_uart4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks), + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_uart_class, }; @@ -1638,25 +1657,20 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", - .sysc = NULL, }; static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .main_clk = NULL, - .prcm = { - .omap2 = { - }, - }, + .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, + .flags = HWMOD_NO_IDLEST, }; /* MMC/SD/SDIO common */ @@ -2097,9 +2111,10 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .master = &am35xx_usbhsotg_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", + .clk = "hsotgusb_ick", .user = OCP_USER_MPU, }; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -2243,6 +2258,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { @@ -2393,7 +2409,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", + .clk = "hsotgusb_ick", .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -3138,6 +3154,107 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* am35xx has Davinci MDIO & EMAC */ +static struct omap_hwmod_class am35xx_mdio_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am35xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am35xx_mdio_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { + .master = &am35xx_mdio_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_fck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { + { + .pa_start = AM35XX_IPSS_MDIO_BASE, + .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci mdio */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_mdio_hwmod, + .clk = "emac_fck", + .addr = am35xx_mdio_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { + { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, + { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, + { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, + { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, + { .irq = -1 } +}; + +static struct omap_hwmod_class am35xx_emac_class = { + .name = "davinci_emac", +}; + +static struct omap_hwmod am35xx_emac_hwmod = { + .name = "davinci_emac", + .mpu_irqs = am35xx_emac_mpu_irqs, + .class = &am35xx_emac_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* l3_core -> davinci emac interface */ +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_emac__l3 = { + .master = &am35xx_emac_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { + { + .pa_start = AM35XX_IPSS_EMAC_BASE, + .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci emac */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_emac_hwmod, + .clk = "emac_ick", + .addr = am35xx_emac_addrs, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3266,6 +3383,10 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &am35xx_mdio__l3, + &am35xx_l4_core__mdio, + &am35xx_emac__l3, + &am35xx_l4_core__emac, NULL }; diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index de6d4645174..d8f6dbf45d1 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -53,7 +53,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, omap_table_init = 1; /* Lets now register with OPP library */ - for (i = 0; i < opp_def_size; i++) { + for (i = 0; i < opp_def_size; i++, opp_def++) { struct omap_hwmod *oh; struct device *dev; @@ -86,7 +86,6 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, opp_def->freq, opp_def->hwmod_name, i, r); } - opp_def++; } return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 78564895e91..ab04d3bba2e 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -15,12 +15,25 @@ #include "powerdomain.h" +#ifdef CONFIG_CPU_IDLE +extern int __init omap3_idle_init(void); +extern int __init omap4_idle_init(void); +#else +static inline int omap3_idle_init(void) +{ + return 0; +} + +static inline int omap4_idle_init(void) +{ + return 0; +} +#endif + extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); -extern int omap3_idle_init(void); -extern int omap4_idle_init(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a595e89972..9b463c98750 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -581,10 +581,13 @@ static void __init prcm_setup_regs(void) OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ - omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + if (omap3_has_iva()) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } /* Clear any pending 'reset' flags */ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); @@ -598,7 +601,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - omap3_iva_idle(); + if (omap3_has_iva()) + omap3_iva_idle(); + omap3_d2d_idle(); } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index fb0a0a6869d..bb883e46307 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -71,6 +71,22 @@ static struct powerdomain mpu_3xxx_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain mpu_am35x_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .flags = PWRDM_HAS_MPU_QUIRK, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, + }, + .voltdm = { .name = "mpu_iva" }, +}; + /* * The USBTLL Save-and-Restore mechanism is broken on * 3430s up to ES3.0 and 3630ES1.0. Hence this feature @@ -120,6 +136,23 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain core_am35x_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEM1RETSTATE */ + [1] = PWRSTS_ON, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_ON, /* MEM2ONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain dss_pwrdm = { .name = "dss_pwrdm", .prcm_offs = OMAP3430_DSS_MOD, @@ -135,6 +168,21 @@ static struct powerdomain dss_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain dss_am35x_pwrdm = { + .name = "dss_pwrdm", + .prcm_offs = OMAP3430_DSS_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + /* * Although the 34XX TRM Rev K Table 4-371 notes that retention is a * possible SGX powerstate, the SGX device itself does not support @@ -156,6 +204,21 @@ static struct powerdomain sgx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain sgx_am35x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain cam_pwrdm = { .name = "cam_pwrdm", .prcm_offs = OMAP3430_CAM_MOD, @@ -186,6 +249,21 @@ static struct powerdomain per_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain per_am35x_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, @@ -200,6 +278,14 @@ static struct powerdomain neon_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain neon_am35x_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .voltdm = { .name = "mpu_iva" }, +}; + static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, @@ -293,6 +379,22 @@ static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = { NULL }; +static struct powerdomain *powerdomains_am35x[] __initdata = { + &wkup_omap2_pwrdm, + &mpu_am35x_pwrdm, + &neon_am35x_pwrdm, + &core_am35x_pwrdm, + &sgx_am35x_pwrdm, + &dss_am35x_pwrdm, + &per_am35x_pwrdm, + &emu_pwrdm, + &dpll1_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, + NULL +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -301,21 +403,34 @@ void __init omap3xxx_powerdomains_init(void) return; pwrdm_register_platform_funcs(&omap3_pwrdm_operations); - pwrdm_register_pwrdms(powerdomains_omap3430_common); rev = omap_rev(); - if (rev == OMAP3430_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es1); - else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || - rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); - else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 || - rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 || - rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) - pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); - else - WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + pwrdm_register_pwrdms(powerdomains_am35x); + } else { + pwrdm_register_pwrdms(powerdomains_omap3430_common); + + switch (rev) { + case OMAP3430_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es1); + break; + case OMAP3430_REV_ES2_0: + case OMAP3430_REV_ES2_1: + case OMAP3430_REV_ES3_0: + case OMAP3630_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); + break; + case OMAP3430_REV_ES3_1: + case OMAP3430_REV_ES3_1_2: + case OMAP3630_REV_ES1_1: + case OMAP3630_REV_ES1_2: + pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); + break; + default: + WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + } + } pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6da3ba483ad..cc1398e8b46 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -203,8 +203,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 -#define OMAP3430_EN_UART4_MASK (1 << 23) -#define OMAP3430_EN_UART4_SHIFT 23 +#define AM35XX_EN_UART4_MASK (1 << 23) +#define AM35XX_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index dfe00ddb5c6..534d732caa1 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -85,7 +85,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int virtirq; - int nr_irqs = prcm_irq_setup->nr_regs * 32; + int nr_irq = prcm_irq_setup->nr_regs * 32; /* * If we are suspended, mask all interrupts from PRCM level, @@ -110,7 +110,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) prcm_irq_setup->read_pending_irqs(pending); /* No bit set, then all IRQs are handled */ - if (find_first_bit(pending, nr_irqs) >= nr_irqs) + if (find_first_bit(pending, nr_irq) >= nr_irq) break; omap_prcm_events_filter_priority(pending, priority_pending); @@ -121,11 +121,11 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) */ /* Serve priority events first */ - for_each_set_bit(virtirq, priority_pending, nr_irqs) + for_each_set_bit(virtirq, priority_pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); /* Serve normal events next */ - for_each_set_bit(virtirq, pending, nr_irqs) + for_each_set_bit(virtirq, pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); } if (chip->irq_ack) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 43a97907533..3882f3c7608 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -49,6 +49,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { struct voltagedomain *voltdm = (struct voltagedomain *)data; @@ -60,6 +61,7 @@ static int twl_get_voltage(void *data) struct voltagedomain *voltdm = (struct voltagedomain *)data; return voltdm_get_voltage(voltdm); } +#endif void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -213,10 +215,6 @@ static struct twl_regulator_driver_data omap3_vdd2_drvdata = { void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; if (!pmic_data->vdd1) { omap3_vdd1.driver_data = &omap3_vdd1_drvdata; omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); @@ -481,11 +479,6 @@ static struct regulator_init_data omap4_v2v1_idata = { void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL6030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL6030_IRQ_END; - if (!pmic_data->vdd1) { omap4_vdd1.driver_data = &omap4_vdd1_drvdata; omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 81aedb7c893..54e69973f39 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1,4 +1,4 @@ -obj-y += devices.o gpio.o irq.o timer.o +obj-y += devices.o gpio.o irq.o timer.o restart.o obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c index a464c758441..f9fbeb2d10e 100644 --- a/arch/arm/mach-vt8500/bv07.c +++ b/arch/arm/mach-vt8500/bv07.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -62,6 +63,7 @@ void __init bv07_init(void) else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); + wmt_setup_restart(); vt8500_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +71,7 @@ void __init bv07_init(void) MACHINE_START(BV07, "Benign BV07 Mini Netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = vt8500_reserve_mem, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h new file mode 100644 index 00000000000..89f9b787d2a --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/restart.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-vt8500/restart.h + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void wmt_setup_restart(void); +void wmt_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h deleted file mode 100644 index 58fa8010ee6..00000000000 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/system.h - * - */ -#include <asm/io.h> - -/* PM Software Reset request register */ -#define VT8500_PMSR_VIRT 0xf8130060 - -static inline void arch_reset(char mode, const char *cmd) -{ - writel(1, VT8500_PMSR_VIRT); -} diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c new file mode 100644 index 00000000000..497e89a5e13 --- /dev/null +++ b/arch/arm/mach-vt8500/restart.c @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-vt8500/restart.c + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <asm/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define LEGACY_PMC_BASE 0xD8130000 +#define WMT_PRIZM_PMSR_REG 0x60 + +static void __iomem *pmc_base; + +void wmt_setup_restart(void) +{ + struct device_node *np; + + /* + * Check if Power Mgmt Controller node is present in device tree. If no + * device tree node, use the legacy PMSR value (valid for all current + * SoCs). + */ + np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc"); + if (np) { + pmc_base = of_iomap(np, 0); + + if (!pmc_base) + pr_err("%s:of_iomap(pmc) failed\n", __func__); + + of_node_put(np); + } else { + pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); + if (!pmc_base) { + pr_err("%s:ioremap(rstc) failed\n", __func__); + return; + } + } +} + +void wmt_restart(char mode, const char *cmd) +{ + if (pmc_base) + writel(1, pmc_base + WMT_PRIZM_PMSR_REG); +} diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c index cf910a95608..db19886caf7 100644 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -61,7 +62,7 @@ void __init wm8505_7in_init(void) pm_power_off = &vt8500_power_off; else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); - + wmt_setup_restart(); wm8505_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +70,7 @@ void __init wm8505_7in_init(void) MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = wm8505_reserve_mem, .map_io = wm8505_map_io, .init_irq = wm8505_init_irq, diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index de6c0a08f46..430081ac0c4 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -238,9 +238,7 @@ IS_AM_SUBCLASS(335x, 0x335) /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap850(): True for OMAP850 + * cpu_is_omap310(): True for OMAP310 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 * cpu_is_omap1611(): True for OMAP1611 @@ -262,8 +260,6 @@ static inline int is_omap ##type (void) \ } IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(850, 0x0850) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) IS_OMAP_TYPE(1611, 0x1611) @@ -277,8 +273,6 @@ IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap850() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 #define cpu_is_omap5912() 0 @@ -294,19 +288,9 @@ IS_OMAP_TYPE(3430, 0x3430) /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. + * between 310 vs. 1510 and 1611B/5912 vs. 1710. */ -#if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -#endif - -#if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -#endif - #if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap310 # undef cpu_is_omap1510 diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index aeba71796ad..32394895920 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h deleted file mode 100644 index 14272bc1a6f..00000000000 --- a/arch/arm/plat-omap/include/plat/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h deleted file mode 100644 index c33f6798171..00000000000 --- a/arch/arm/plat-omap/include/plat/omap850.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap850.h - * - * Hardware definitions for TI OMAP850 processor. - * - * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP850_H -#define __ASM_ARCH_OMAP850_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP850_DSP_BASE 0xE0000000 -#define OMAP850_DSP_SIZE 0x50000 -#define OMAP850_DSP_START 0xE0000000 - -#define OMAP850_DSPREG_BASE 0xE1000000 -#define OMAP850_DSPREG_SIZE SZ_128K -#define OMAP850_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_CONFIG_BASE 0xfffe1000 -#define OMAP850_IO_CONF_0 0xfffe1070 -#define OMAP850_IO_CONF_1 0xfffe1074 -#define OMAP850_IO_CONF_2 0xfffe1078 -#define OMAP850_IO_CONF_3 0xfffe107c -#define OMAP850_IO_CONF_4 0xfffe1080 -#define OMAP850_IO_CONF_5 0xfffe1084 -#define OMAP850_IO_CONF_6 0xfffe1088 -#define OMAP850_IO_CONF_7 0xfffe108c -#define OMAP850_IO_CONF_8 0xfffe1090 -#define OMAP850_IO_CONF_9 0xfffe1094 -#define OMAP850_IO_CONF_10 0xfffe1098 -#define OMAP850_IO_CONF_11 0xfffe109c -#define OMAP850_IO_CONF_12 0xfffe10a0 -#define OMAP850_IO_CONF_13 0xfffe10a4 - -#define OMAP850_MODE_1 0xfffe1010 -#define OMAP850_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP850_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_FLASH_CFG_0 0xfffecc10 -#define OMAP850_FLASH_ACFG_0 0xfffecc50 -#define OMAP850_FLASH_CFG_1 0xfffecc14 -#define OMAP850_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_ICR_BASE 0xfffbb800 -#define OMAP850_DSP_M_CTL 0xfffbb804 -#define OMAP850_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP850_H */ - diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad32621aa52..5e13c3884aa 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -282,6 +282,8 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } mbox->rxq = mq; mq->mbox = mbox; + + omap_mbox_enable_irq(mbox, IRQ_RX); } mutex_unlock(&mbox_configured_lock); return 0; @@ -305,6 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) mutex_lock(&mbox_configured_lock); if (!--mbox->use_count) { + omap_mbox_disable_irq(mbox, IRQ_RX); free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); flush_work_sync(&mbox->rxq->work); @@ -338,13 +341,15 @@ struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) if (!mbox) return ERR_PTR(-ENOENT); - ret = omap_mbox_startup(mbox); - if (ret) - return ERR_PTR(-ENODEV); - if (nb) blocking_notifier_chain_register(&mbox->notifier, nb); + ret = omap_mbox_startup(mbox); + if (ret) { + blocking_notifier_chain_unregister(&mbox->notifier, nb); + return ERR_PTR(-ENODEV); + } + return mbox; } EXPORT_SYMBOL(omap_mbox_get); |