diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-mxs/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 76 |
2 files changed, 77 insertions, 0 deletions
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 5ea676af860..4f6f174af6c 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -35,6 +35,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP default y help diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 8bb221754e4..08002d02267 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -30,6 +30,8 @@ #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) +#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) static const iomux_cfg_t mx28evk_pads[] __initconst = { @@ -79,6 +81,40 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { MX28_PAD_GPMI_CE3N__CAN1_RX, /* transceiver power control */ MX28_PAD_SSP1_CMD__GPIO_2_13, + + /* mxsfb (lcdif) */ + MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, + MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, + MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, + MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, + MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, + MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, + MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, + MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, + MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, + MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, + MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, + MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, + MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, + MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, + MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, + MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, + MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL, + MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL, + MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL, + /* LCD panel enable */ + MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, + /* backlight control */ + MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, }; /* fec */ @@ -196,6 +232,32 @@ static const struct flexcan_platform_data } }; +/* mxsfb (lcdif) */ +static struct fb_videomode mx28evk_video_modes[] = { + { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { + .mode_list = mx28evk_video_modes, + .mode_count = ARRAY_SIZE(mx28evk_video_modes), + .default_bpp = 32, + .ld_intf_width = STMLCDIF_24BIT, +}; + static void __init mx28evk_init(void) { int ret; @@ -221,6 +283,20 @@ static void __init mx28evk_init(void) mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); } + + ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); + if (ret) + pr_warn("failed to request gpio lcd-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_LCD_ENABLE, 1); + + ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); + if (ret) + pr_warn("failed to request gpio bl-enable: %d\n", ret); + else + gpio_set_value(MX28EVK_BL_ENABLE, 1); + + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); } static void __init mx28evk_timer_init(void) |