diff options
Diffstat (limited to 'arch/arm')
311 files changed, 16252 insertions, 3328 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1ae18d879e1..cf8a99f19dc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -433,6 +433,17 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to <sjhill@cotw.com>. +config ARCH_DOVE + bool "Marvell Dove" + select PCI + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_ORION + help + Support for the Marvell Dove SoC 88AP510 + config ARCH_KIRKWOOD bool "Marvell Kirkwood" select CPU_FEROCEON @@ -757,6 +768,9 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/mach-dove/Kconfig" + +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" @@ -823,6 +837,8 @@ config ARCH_ACORN config PLAT_IOP bool + select GENERIC_CLOCKEVENTS + select GENERIC_TIME config PLAT_ORION bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7603eba7c0c..fa0cdab2e1d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_DAVINCI) := davinci +machine-$(CONFIG_ARCH_DOVE) := dove machine-$(CONFIG_ARCH_EBSA110) := ebsa110 machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_GEMINI) := gemini @@ -180,9 +181,9 @@ plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa -plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c -plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c -plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung +plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fa6fbf45cf3..d356af7cef8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -743,6 +743,12 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush + .word 0x560f5810 @ Marvell PJ4 ARMv6 + .word 0xff0ffff0 + W(b) __armv4_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv6_mmu_cache_flush + .word 0x000f0000 @ new CPU Id .word 0x000f0000 W(b) __armv7_mmu_cache_on diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index d18d21bb41e..a0170867130 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc8 -# Thu Jun 4 09:53:21 2009 +# Linux kernel version: 2.6.32-rc4 +# Tue Oct 13 19:03:13 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 @@ -83,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -96,6 +94,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -103,13 +105,17 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y -# CONFIG_SLOW_WORK is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,11 +123,11 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,19 +148,22 @@ CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -163,25 +172,27 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Intel PXA2xx/PXA3xx Implementations @@ -191,16 +202,19 @@ CONFIG_ARCH_PXA=y # Supported PXA3xx Processor Variants # CONFIG_CPU_PXA300=y -# CONFIG_CPU_PXA310 is not set +CONFIG_CPU_PXA310=y # CONFIG_CPU_PXA320 is not set # CONFIG_CPU_PXA930 is not set # CONFIG_CPU_PXA935 is not set +# CONFIG_CPU_PXA950 is not set # CONFIG_ARCH_GUMSTIX is not set # CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_MACH_STARGATE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set # CONFIG_MACH_MP900C is not set +# CONFIG_MACH_BALLOON3 is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set # CONFIG_ARCH_VIPER is not set @@ -218,6 +232,7 @@ CONFIG_CPU_PXA300=y # CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set CONFIG_MACH_CM_X300=y +# CONFIG_MACH_H4700 is not set # CONFIG_MACH_MAGICIAN is not set # CONFIG_MACH_HIMALAYA is not set # CONFIG_MACH_MIOA701 is not set @@ -225,8 +240,8 @@ CONFIG_MACH_CM_X300=y # CONFIG_ARCH_PXA_PALM is not set # CONFIG_MACH_CSB726 is not set # CONFIG_PXA_EZX is not set +# CONFIG_MACH_XCEP is not set CONFIG_PXA3xx=y -# CONFIG_PXA_PWM is not set CONFIG_PLAT_PXA=y # @@ -236,7 +251,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -246,11 +261,12 @@ CONFIG_IO_36=y # # Processor Features # -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_XSC3L2=y +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_COMMON_CLKDEV=y @@ -272,11 +288,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_HIGHMEM=y @@ -292,17 +309,19 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400" +CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -355,6 +374,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -396,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -410,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -433,22 +455,27 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -# CONFIG_BT_HCIBTUSB is not set +CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m # CONFIG_LIB80211_DEBUG is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -461,6 +488,7 @@ CONFIG_LIB80211=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -472,9 +500,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set @@ -521,6 +549,9 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -556,7 +587,15 @@ CONFIG_MTD_NAND_PXA3xx=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -570,6 +609,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -593,10 +633,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -621,7 +657,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -636,6 +671,7 @@ CONFIG_MII=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=0 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y +# CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set @@ -648,20 +684,20 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_HOSTAP is not set # @@ -683,6 +719,7 @@ CONFIG_LIBERTAS_SDIO=m # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -706,33 +743,51 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_OPENCORES is not set CONFIG_KEYBOARD_PXA27x=m -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DA9034 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_WM97XX=m +# CONFIG_TOUCHSCREEN_WM9705 is not set +CONFIG_TOUCHSCREEN_WM9712=y +# CONFIG_TOUCHSCREEN_WM9713 is not set +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -760,6 +815,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y @@ -774,6 +830,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -784,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_PXA=y @@ -807,19 +865,36 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +# CONFIG_SPI_PXA2XX is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: @@ -839,11 +914,17 @@ CONFIG_GPIO_PCA953X=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -860,32 +941,33 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set -# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA903X=y # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_DA903X=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -925,7 +1007,17 @@ CONFIG_FB_PXA=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_TDO24M=y +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_DA903X=m # # Display device support @@ -956,38 +1048,48 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set CONFIG_SND_ARM=y CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y # CONFIG_SND_PXA2XX_AC97 is not set -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_EM_X270=m CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9712=m # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # @@ -1006,10 +1108,12 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1023,9 +1127,15 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1054,6 +1164,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1151,8 +1262,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_PXA=m # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1162,8 +1274,10 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DA903X is not set +# CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set # @@ -1179,6 +1293,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1210,10 +1325,19 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1233,12 +1357,15 @@ CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # -CONFIG_RTC_DRV_SA1100=y -# CONFIG_RTC_DRV_PXA is not set +# CONFIG_RTC_DRV_SA1100 is not set +CONFIG_RTC_DRV_PXA=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1256,10 +1383,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1319,6 +1449,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1329,12 +1465,12 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1378,7 +1514,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1428,6 +1564,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1441,6 +1578,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1460,32 +1598,20 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1509,7 +1635,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1551,11 +1676,13 @@ CONFIG_CRYPTO_ECB=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m @@ -1591,9 +1718,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation @@ -1608,7 +1735,7 @@ CONFIG_CRYPTO_DES=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1616,6 +1743,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig new file mode 100644 index 00000000000..b3a491675d5 --- /dev/null +++ b/arch/arm/configs/dove_defconfig @@ -0,0 +1,1620 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Tue Nov 24 13:53:37 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_DOVE=y +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Marvell Dove Implementations +# +CONFIG_MACH_DOVE_DB=y +CONFIG_PLAT_ORION=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_TAUROS2=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +CONFIG_MV643XX_ETH=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_ORION=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_MV=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MV_XOR=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=y +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_TEA=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_MV_CESA is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index d5ee16e6abf..492f29aba33 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Mon Jul 7 17:52:21 2008 +# Linux kernel version: 2.6.32-rc5 +# Mon Nov 2 13:18:50 2009 # CONFIG_ARM=y CONFIG_HAVE_PWM=y @@ -9,24 +9,22 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -35,7 +33,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="-ezxdev" +CONFIG_LOCALVERSION="-ezx200910312315" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -44,56 +42,78 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -101,12 +121,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -120,25 +138,27 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -146,39 +166,64 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_BCMRING is not set # # Intel PXA2xx/PXA3xx Implementations # # CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_MACH_STARGATE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_MACH_BALLOON3 is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set # CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set # CONFIG_MACH_ZYLONITE is not set # CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_H4700 is not set # CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MIOA701 is not set # CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_CSB726 is not set CONFIG_PXA_EZX=y CONFIG_MACH_EZX_A780=y CONFIG_MACH_EZX_E680=y @@ -186,17 +231,11 @@ CONFIG_MACH_EZX_A1200=y CONFIG_MACH_EZX_A910=y CONFIG_MACH_EZX_E6=y CONFIG_MACH_EZX_E2=y +# CONFIG_MACH_XCEP is not set CONFIG_PXA27x=y CONFIG_PXA_SSP=y -CONFIG_PXA_PWM=y - -# -# Boot options -# - -# -# Power management -# +CONFIG_PXA_HAVE_BOARD_IRQS=y +CONFIG_PLAT_PXA=y # # Processor Type @@ -205,7 +244,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -216,9 +255,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -231,44 +271,71 @@ CONFIG_XSCALE_PMU=y # Kernel Features # CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation @@ -285,6 +352,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m @@ -297,11 +366,8 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -315,6 +381,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -342,7 +409,6 @@ CONFIG_INET_TUNNEL=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -393,18 +459,22 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -413,20 +483,23 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set CONFIG_NETFILTER_XT_MATCH_REALM=m +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -434,20 +507,21 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -455,8 +529,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m @@ -469,9 +543,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -483,30 +557,29 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -517,9 +590,11 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -529,64 +604,34 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=y -CONFIG_BT_L2CAP=m +CONFIG_BT_L2CAP=y CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m +CONFIG_BT_BNEP=y CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m +CONFIG_BT_HIDP=y # # Bluetooth device drivers # -# CONFIG_BT_HCIUSB is not set -# CONFIG_BT_HCIBTUSB is not set -# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=y CONFIG_BT_HCIUART_H4=y # CONFIG_BT_HCIUART_BCSP is not set # CONFIG_BT_HCIUART_LL is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y - -# -# Wireless -# -CONFIG_CFG80211=m -CONFIG_NL80211=y -CONFIG_WIRELESS_EXT=y -CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -598,13 +643,19 @@ CONFIG_IEEE80211_CRYPT_TKIP=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -616,9 +667,9 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_HAVE_MTD_OTP=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -647,7 +698,7 @@ CONFIG_MTD_CFI_I1=y # CONFIG_MTD_CFI_I2 is not set # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set +CONFIG_MTD_OTP=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -655,19 +706,15 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -CONFIG_MTD_XIP=y +# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_SHARP_SL is not set # CONFIG_MTD_PLATRAM is not set # @@ -675,6 +722,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -690,6 +738,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -700,15 +753,14 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -722,7 +774,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -732,13 +783,11 @@ CONFIG_DUMMY=y # CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -765,6 +814,7 @@ CONFIG_SLHC=m # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -786,29 +836,45 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_OPENCORES is not set CONFIG_KEYBOARD_PXA27x=y -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_TOUCHSCREEN_PCAP=y CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set @@ -816,7 +882,10 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +CONFIG_INPUT_PCAP=y # # Hardware I/O ports @@ -828,6 +897,7 @@ CONFIG_INPUT_UINPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -842,92 +912,130 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=8 # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -CONFIG_SPI_PXA2XX=m +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y # -# GPIO Support +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -938,54 +1046,170 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set CONFIG_EZX_PCAP=y - -# -# Multimedia devices -# +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_PCAP=y +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m +CONFIG_MEDIA_TUNER=y +CONFIG_MEDIA_TUNER_CUSTOMISE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_MC44S803 is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_SG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=y +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_PXA27x=y +# CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_V4L_USB_DRIVERS is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_VIDEO_PXA27x is not set CONFIG_RADIO_ADAPTERS=y +# CONFIG_I2C_SI4713 is not set +# CONFIG_RADIO_SI4713 is not set # CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set +# CONFIG_RADIO_SI470X is not set +# CONFIG_USB_MR800 is not set +CONFIG_RADIO_TEA5764=y +CONFIG_RADIO_TEA5764_XTAL=y # CONFIG_DAB is not set # @@ -996,6 +1220,7 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1017,15 +1242,19 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +CONFIG_FB_PXA_OVERLAY=y # CONFIG_FB_PXA_SMARTPANEL is not set CONFIG_FB_PXA_PARAMETERS=y # CONFIG_FB_MBX is not set -# CONFIG_FB_AM200EPD is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y CONFIG_BACKLIGHT_PWM=y # @@ -1053,85 +1282,60 @@ CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# SPI devices -# - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_PXA2XX_LIB=y +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_PXA2XX_SOC=y - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_APPLE=m +# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1150,32 +1354,42 @@ CONFIG_USB=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -1183,7 +1397,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1196,7 +1409,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1204,62 +1417,94 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_R8A66597 is not set CONFIG_USB_GADGET_PXA27X=y CONFIG_USB_PXA27X=y -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y # CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=y -# CONFIG_MMC_SPI is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=y +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1267,7 +1512,14 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1297,45 +1549,67 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_SA1100=m +# CONFIG_RTC_DRV_SA1100 is not set +# CONFIG_RTC_DRV_PXA is not set +CONFIG_RTC_DRV_PCAP=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m -CONFIG_FS_MBCACHE=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -1350,6 +1624,10 @@ CONFIG_XFS_FS=m # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1357,6 +1635,12 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_CUSE=m + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1381,15 +1665,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1397,13 +1679,35 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1411,19 +1715,18 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set -# CONFIG_ROOT_NFS is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1490,25 +1793,83 @@ CONFIG_NLS_UTF8=m # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y @@ -1516,12 +1877,20 @@ CONFIG_CRYPTO=y # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1549,14 +1918,20 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1587,28 +1962,40 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index a4f9a2a8149..7734ccab211 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Tue Jul 28 14:11:34 2009 +# Linux kernel version: 2.6.32-rc5 +# Sun Nov 1 22:56:24 2009 # CONFIG_ARM=y CONFIG_HAVE_PWM=y @@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -87,16 +87,14 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -139,6 +137,7 @@ CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # Freescale MXC Implementations # # CONFIG_ARCH_MX1 is not set # CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX25 is not set CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MXC91231 is not set CONFIG_ARCH_MX31=y CONFIG_ARCH_MX35=y @@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_KZM_ARM11_01=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_ARCH_HAS_RNGA=y @@ -218,7 +223,7 @@ CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -236,6 +241,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_L2X0=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -257,6 +263,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -277,6 +285,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -326,6 +335,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -367,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -407,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -416,9 +428,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -587,14 +599,12 @@ CONFIG_DNET=y # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -608,6 +618,7 @@ CONFIG_FEC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -630,7 +641,14 @@ CONFIG_DEVKMEM=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support @@ -649,6 +667,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -681,15 +700,17 @@ CONFIG_I2C_IMX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -712,6 +733,10 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# CONFIG_W1=y # @@ -734,7 +759,6 @@ CONFIG_W1_SLAVE_THERM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -759,12 +783,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_CONFIG_MODE_0=y CONFIG_MFD_WM8352_CONFIG_MODE_0=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_WM8350=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set CONFIG_MEDIA_SUPPORT=y # @@ -874,10 +910,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_MXC=y # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set CONFIG_DMADEVICES=y @@ -896,16 +934,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_WM8350=y -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -921,6 +954,7 @@ CONFIG_REGULATOR_WM8350=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -995,7 +1029,6 @@ CONFIG_UBIFS_FS_ZLIB=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1033,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1062,7 +1096,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1104,11 +1137,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h new file mode 100644 index 00000000000..538f17ca905 --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-tauros2.h @@ -0,0 +1,11 @@ +/* + * arch/arm/include/asm/hardware/cache-tauros2.h + * + * Copyright (C) 2008 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +extern void __init tauros2_init(void); diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 8d60ad267e3..5daea2961d4 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -234,7 +234,13 @@ extern int iop3xx_get_init_atu(void); void iop3xx_map_io(void); void iop_init_cp6_handler(void); void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); + +static inline u32 read_tmr0(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val)); + return val; +} static inline void write_tmr0(u32 val) { @@ -253,6 +259,11 @@ static inline u32 read_tcr0(void) return val; } +static inline void write_tcr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val)); +} + static inline u32 read_tcr1(void) { u32 val; @@ -260,6 +271,11 @@ static inline u32 read_tcr1(void) return val; } +static inline void write_tcr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val)); +} + static inline void write_trr0(u32 val) { asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val)); diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index e5dfc2895e2..573b803dc6b 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,7 +32,7 @@ * numbers for r1. * */ - .section ".text.head", "ax" + __HEAD ENTRY(stext) setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 38ccbe1d3b2..eb62bf94721 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -74,7 +74,7 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ - .section ".text.head", "ax" + __HEAD ENTRY(stext) setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index aecf87dfbae..71151bd87a3 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -24,13 +24,11 @@ SECTIONS #else . = PAGE_OFFSET + TEXT_OFFSET; #endif - .text.head : { - _stext = .; - _sinittext = .; - *(.text.head) - } .init : { /* Init code and data */ + _stext = .; + _sinittext = .; + HEAD_TEXT INIT_TEXT _einittext = .; __proc_info_begin = .; @@ -42,43 +40,31 @@ SECTIONS __tagtable_begin = .; *(.taglist.init) __tagtable_end = .; - . = ALIGN(16); - __setup_start = .; - *(.init.setup) - __setup_end = .; + + INIT_SETUP(16) + __early_begin = .; *(.early_param.init) __early_end = .; - __initcall_start = .; - INITCALLS - __initcall_end = .; - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - __security_initcall_start = .; - *(.security_initcall.init) - __security_initcall_end = .; -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(32); - __initramfs_start = .; - usr/built-in.o(.init.ramfs) - __initramfs_end = .; -#endif - . = ALIGN(PAGE_SIZE); - __per_cpu_load = .; - __per_cpu_start = .; - *(.data.percpu.page_aligned) - *(.data.percpu) - *(.data.percpu.shared_aligned) - __per_cpu_end = .; + + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(PAGE_SIZE); - __init_end = .; #endif } + PERCPU(PAGE_SIZE) + +#ifndef CONFIG_XIP_KERNEL + . = ALIGN(PAGE_SIZE); + __init_end = .; +#endif + /DISCARD/ : { /* Exit code and data */ EXIT_TEXT EXIT_DATA @@ -157,7 +143,7 @@ SECTIONS * first, the init task union, aligned * to an 8192 byte boundary. */ - *(.data.init_task) + INIT_TASK_DATA(THREAD_SIZE) #ifdef CONFIG_XIP_KERNEL . = ALIGN(PAGE_SIZE); @@ -167,17 +153,8 @@ SECTIONS __init_end = .; #endif - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - /* - * then the cacheline aligned data - */ - . = ALIGN(32); - *(.data.cacheline_aligned) + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(32) /* * The exception fixup table (might need resorting at runtime) @@ -256,20 +233,10 @@ SECTIONS } #endif - .bss : { - __bss_start = .; /* BSS */ - *(.bss) - *(COMMON) - __bss_stop = .; - _end = .; - } - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } + BSS_SECTION(0, 0, 0) + _end = .; + + STABS_DEBUG .comment 0 : { *(.comment) } } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c71e39ed092..0b2ee953f16 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,5 +1,20 @@ if ARCH_AT91 +config HAVE_AT91_DATAFLASH_CARD + bool + +config HAVE_NAND_ATMEL_BUSWIDTH_16 + bool + +config HAVE_AT91_USART3 + bool + +config HAVE_AT91_USART4 + bool + +config HAVE_AT91_USART5 + bool + menu "Atmel AT91 System-on-Chip" choice @@ -10,54 +25,69 @@ config ARCH_AT91RM9200 select CPU_ARM920T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_AT91_USART4 + select HAVE_AT91_USART5 config ARCH_AT91SAM9261 bool "AT91SAM9261" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9263 bool "AT91SAM9263" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9RL bool "AT91SAM9RL" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_FB_ATMEL config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_AT91_USART4 + select HAVE_AT91_USART5 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_FB_ATMEL config ARCH_AT91CAP9 bool "AT91CAP9" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91X40 bool "AT91x40" @@ -76,89 +106,79 @@ comment "AT91RM9200 Board Type" config MACH_ONEARM bool "Ajeco 1ARM Single Board Computer" - depends on ARCH_AT91RM9200 help Select this if you are using Ajeco's 1ARM Single Board Computer. <http://www.ajeco.fi/products.htm> config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-DK Development board. (Discontinued) config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> config MACH_CSB337 bool "Cogent CSB337" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB337 board. <http://www.cogcomp.com/csb_csb337.htm> config MACH_CSB637 bool "Cogent CSB637" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB637 board. <http://www.cogcomp.com/csb_csb637.htm> config MACH_CARMEVA bool "Conitec ARM&EVA" - depends on ARCH_AT91RM9200 help Select this if you are using Conitec's AT91RM9200-MCU-Module. <http://www.conitec.net/english/linuxboard.htm> config MACH_ATEB9200 bool "Embest ATEB9200" - depends on ARCH_AT91RM9200 help Select this if you are using Embest's ATEB9200 board. <http://www.embedinfo.com/english/product/ATEB9200.asp> config MACH_KB9200 bool "KwikByte KB920x" - depends on ARCH_AT91RM9200 help Select this if you are using KwikByte's KB920x board. <http://kwikbyte.com/KB9202_description_new.htm> config MACH_PICOTUX2XX bool "picotux 200" - depends on ARCH_AT91RM9200 help Select this if you are using a picotux 200. <http://www.picotux.com/> config MACH_KAFA bool "Sperry-Sun KAFA board" - depends on ARCH_AT91RM9200 help Select this if you are using Sperry-Sun's KAFA board. config MACH_ECBAT91 bool "emQbit ECB_AT91 SBC" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using emQbit's ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> config MACH_YL9200 bool "ucDragon YL-9200" - depends on ARCH_AT91RM9200 help Select this if you are using the ucDragon YL-9200 board. config MACH_CPUAT91 bool "Eukrea CPUAT91" - depends on ARCH_AT91RM9200 help Select this if you are using the Eukrea Electromatique's CPUAT91 board <http://www.eukrea.com/>. @@ -178,7 +198,6 @@ comment "AT91SAM9260 Variants" config ARCH_AT91SAM9260_SAM9XE bool "AT91SAM9XE" - depends on ARCH_AT91SAM9260 help Select this if you are using Atmel's AT91SAM9XE System-on-Chip. They are basically AT91SAM9260s with various sizes of embedded Flash. @@ -187,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - depends on ARCH_AT91SAM9260 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> config MACH_CAM60 bool "KwikByte KB9260 (CAM60) board" - depends on ARCH_AT91SAM9260 help Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. <http://www.kwikbyte.com/KB9260.html> config MACH_SAM9_L9260 bool "Olimex SAM9-L9260 board" - depends on ARCH_AT91SAM9260 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. <http://www.olimex.com/dev/sam9-L9260.html> config MACH_AFEB9260 bool "Custom afeb9260 board v1" - depends on ARCH_AT91SAM9260 help Select this if you are using custom afeb9260 board based on open hardware design. Select this for revision 1 of the board. @@ -217,21 +235,18 @@ config MACH_AFEB9260 config MACH_USB_A9260 bool "CALAO USB-A9260" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems USB-A9260. <http://www.calao-systems.com> config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems QIL-A9260 Board. <http://www.calao-systems.com> config MACH_CPU9260 bool "Eukrea CPU9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> @@ -246,7 +261,8 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" - depends on ARCH_AT91SAM9261 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -261,7 +277,8 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" - depends on ARCH_AT91SAM9G10 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -276,21 +293,21 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" - depends on ARCH_AT91SAM9263 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> config MACH_USB_A9263 bool "CALAO USB-A9263" - depends on ARCH_AT91SAM9263 help Select this if you are using a Calao Systems USB-A9263. <http://www.calao-systems.com> config MACH_NEOCORE926 bool "Adeneo NEOCORE926" - depends on ARCH_AT91SAM9263 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using the Adeneo Neocore 926 board. @@ -304,7 +321,6 @@ comment "AT91SAM9RL Board Type" config MACH_AT91SAM9RLEK bool "Atmel AT91SAM9RL-EK Evaluation Kit" - depends on ARCH_AT91SAM9RL help Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. @@ -318,14 +334,15 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" - depends on ARCH_AT91SAM9G20 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. config MACH_AT91SAM9G20EK_2MMC bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - depends on ARCH_AT91SAM9G20 + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -333,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC config MACH_CPU9G20 bool "Eukrea CPU9G20 board" - depends on ARCH_AT91SAM9G20 help Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> @@ -348,7 +364,7 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9G45EKES bool "Atmel AT91SAM9G45-EKES Evaluation Kit" - depends on ARCH_AT91SAM9G45 + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -364,7 +380,8 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" - depends on ARCH_AT91CAP9 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -393,13 +410,13 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) + depends on HAVE_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on HAVE_NAND_ATMEL_BUSWIDTH_16 help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -461,15 +478,15 @@ config AT91_EARLY_USART2 config AT91_EARLY_USART3 bool "USART3" - depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45) + depends on HAVE_AT91_USART3 config AT91_EARLY_USART4 bool "USART4" - depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 + depends on HAVE_AT91_USART4 config AT91_EARLY_USART5 bool "USART5" - depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 + depends on HAVE_AT91_USART5 endchoice diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig new file mode 100644 index 00000000000..3b9a32ace90 --- /dev/null +++ b/arch/arm/mach-dove/Kconfig @@ -0,0 +1,14 @@ +if ARCH_DOVE + +menu "Marvell Dove Implementations" + +config MACH_DOVE_DB + bool "Marvell DB-MV88AP510 Development Board" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell DB-MV88AP510 Development Board. + +endmenu + +endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile new file mode 100644 index 00000000000..7ab3be53f64 --- /dev/null +++ b/arch/arm/mach-dove/Makefile @@ -0,0 +1,3 @@ +obj-y += common.o addr-map.o irq.o pcie.o + +obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot new file mode 100644 index 00000000000..67039c3e0c4 --- /dev/null +++ b/arch/arm/mach-dove/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c new file mode 100644 index 00000000000..00be4fc26dd --- /dev/null +++ b/arch/arm/mach-dove/addr-map.c @@ -0,0 +1,149 @@ +/* + * arch/arm/mach-dove/addr-map.c + * + * Address map functions for Marvell Dove 88AP510 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <asm/mach/arch.h> +#include <asm/setup.h> +#include "common.h" + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0x0 +#define TARGET_BOOTROM 0x1 +#define TARGET_CESA 0x3 +#define TARGET_PCIE0 0x4 +#define TARGET_PCIE1 0x8 +#define TARGET_SCRATCHPAD 0xd + +#define ATTR_CESA 0x01 +#define ATTR_BOOTROM 0xfd +#define ATTR_DEV_SPI0_ROM 0xfe +#define ATTR_DEV_SPI1_ROM 0xfb +#define ATTR_PCIE_IO 0xe0 +#define ATTR_PCIE_MEM 0xe8 +#define ATTR_SCRATCHPAD 0x0 + +/* + * CPU Address Decode Windows registers + */ +#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0) +#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4) +#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8) +#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc) + +struct mbus_dram_target_info dove_mbus_dram_info; + +static inline void __iomem *ddr_map_sc(int i) +{ + return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); +} + +static int cpu_win_can_remap(int win) +{ + if (win < 4) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + u32 ctrl; + + base &= 0xffff0000; + ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; + + writel(base, WIN_BASE(win)); + writel(ctrl, WIN_CTRL(win)); + if (cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + writel(remap & 0xffff0000, WIN_REMAP_LO(win)); + writel(0, WIN_REMAP_HI(win)); + } +} + +void __init dove_setup_cpu_mbus(void) +{ + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 8; i++) { + writel(0, WIN_BASE(i)); + writel(0, WIN_CTRL(i)); + if (cpu_win_can_remap(i)) { + writel(0, WIN_REMAP_LO(i)); + writel(0, WIN_REMAP_HI(i)); + } + } + + /* + * Setup windows for PCIe IO+MEM space. + */ + setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, + TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE); + setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, + TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE); + setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, + TARGET_PCIE0, ATTR_PCIE_MEM, -1); + setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, + TARGET_PCIE1, ATTR_PCIE_MEM, -1); + + /* + * Setup window for CESA engine. + */ + setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, + TARGET_CESA, ATTR_CESA, -1); + + /* + * Setup the Window to the BootROM for Standby and Sleep Resume + */ + setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, + TARGET_BOOTROM, ATTR_BOOTROM, -1); + + /* + * Setup the Window to the PMU Scratch Pad space + */ + setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, + TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1); + + /* + * Setup MBUS dram target info. + */ + dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 2; i++) { + u32 map = readl(ddr_map_sc(i)); + + /* + * Chip select enabled? + */ + if (map & 1) { + struct mbus_dram_window *w; + + w = &dove_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0; /* CS address decoding done inside */ + /* the DDR controller, no need to */ + /* provide attributes */ + w->base = map & 0xff800000; + w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); + } + } + dove_mbus_dram_info.num_cs = cs; +} diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c new file mode 100644 index 00000000000..806972a68c8 --- /dev/null +++ b/arch/arm/mach-dove/common.c @@ -0,0 +1,781 @@ +/* + * arch/arm/mach-dove/common.c + * + * Core functions for Marvell Dove 88AP510 System On Chip + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> +#include <linux/clk.h> +#include <linux/mbus.h> +#include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> +#include <linux/ata_platform.h> +#include <linux/spi/orion_spi.h> +#include <linux/gpio.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/timex.h> +#include <asm/hardware/cache-tauros2.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/pci.h> +#include <mach/dove.h> +#include <mach/bridge-regs.h> +#include <asm/mach/arch.h> +#include <linux/irq.h> +#include <plat/mv_xor.h> +#include <plat/ehci-orion.h> +#include <plat/time.h> +#include "common.h" + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc dove_io_desc[] __initdata = { + { + .virtual = DOVE_SB_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), + .length = DOVE_SB_REGS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = DOVE_NB_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), + .length = DOVE_NB_REGS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = DOVE_PCIE0_IO_VIRT_BASE, + .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE), + .length = DOVE_PCIE0_IO_SIZE, + .type = MT_DEVICE, + }, { + .virtual = DOVE_PCIE1_IO_VIRT_BASE, + .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE), + .length = DOVE_PCIE1_IO_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init dove_map_io(void) +{ + iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc)); +} + +/***************************************************************************** + * EHCI + ****************************************************************************/ +static struct orion_ehci_data dove_ehci_data = { + .dram = &dove_mbus_dram_info, + .phy_version = EHCI_PHY_NA, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +/***************************************************************************** + * EHCI0 + ****************************************************************************/ +static struct resource dove_ehci0_resources[] = { + { + .start = DOVE_USB0_PHYS_BASE, + .end = DOVE_USB0_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_USB0, + .end = IRQ_DOVE_USB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_ehci0 = { + .name = "orion-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dove_ehci_data, + }, + .resource = dove_ehci0_resources, + .num_resources = ARRAY_SIZE(dove_ehci0_resources), +}; + +void __init dove_ehci0_init(void) +{ + platform_device_register(&dove_ehci0); +} + +/***************************************************************************** + * EHCI1 + ****************************************************************************/ +static struct resource dove_ehci1_resources[] = { + { + .start = DOVE_USB1_PHYS_BASE, + .end = DOVE_USB1_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_USB1, + .end = IRQ_DOVE_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_ehci1 = { + .name = "orion-ehci", + .id = 1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dove_ehci_data, + }, + .resource = dove_ehci1_resources, + .num_resources = ARRAY_SIZE(dove_ehci1_resources), +}; + +void __init dove_ehci1_init(void) +{ + platform_device_register(&dove_ehci1); +} + +/***************************************************************************** + * GE00 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = { + .t_clk = 0, + .dram = &dove_mbus_dram_info, +}; + +static struct resource dove_ge00_shared_resources[] = { + { + .name = "ge00 base", + .start = DOVE_GE00_PHYS_BASE + 0x2000, + .end = DOVE_GE00_PHYS_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dove_ge00_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .dev = { + .platform_data = &dove_ge00_shared_data, + }, + .num_resources = 1, + .resource = dove_ge00_shared_resources, +}; + +static struct resource dove_ge00_resources[] = { + { + .name = "ge00 irq", + .start = IRQ_DOVE_GE00_SUM, + .end = IRQ_DOVE_GE00_SUM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_ge00 = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = 1, + .resource = dove_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) +{ + eth_data->shared = &dove_ge00_shared; + dove_ge00.dev.platform_data = eth_data; + + platform_device_register(&dove_ge00_shared); + platform_device_register(&dove_ge00); +} + +/***************************************************************************** + * SoC RTC + ****************************************************************************/ +static struct resource dove_rtc_resource[] = { + { + .start = DOVE_RTC_PHYS_BASE, + .end = DOVE_RTC_PHYS_BASE + 32 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_RTC, + .flags = IORESOURCE_IRQ, + } +}; + +void __init dove_rtc_init(void) +{ + platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2); +} + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct resource dove_sata_resources[] = { + { + .name = "sata base", + .start = DOVE_SATA_PHYS_BASE, + .end = DOVE_SATA_PHYS_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "sata irq", + .start = IRQ_DOVE_SATA, + .end = IRQ_DOVE_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(dove_sata_resources), + .resource = dove_sata_resources, +}; + +void __init dove_sata_init(struct mv_sata_platform_data *sata_data) +{ + sata_data->dram = &dove_mbus_dram_info; + dove_sata.dev.platform_data = sata_data; + platform_device_register(&dove_sata); +} + +/***************************************************************************** + * UART0 + ****************************************************************************/ +static struct plat_serial8250_port dove_uart0_data[] = { + { + .mapbase = DOVE_UART0_PHYS_BASE, + .membase = (char *)DOVE_UART0_VIRT_BASE, + .irq = IRQ_DOVE_UART_0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 0, + }, { + }, +}; + +static struct resource dove_uart0_resources[] = { + { + .start = DOVE_UART0_PHYS_BASE, + .end = DOVE_UART0_PHYS_BASE + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_UART_0, + .end = IRQ_DOVE_UART_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_uart0 = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = dove_uart0_data, + }, + .resource = dove_uart0_resources, + .num_resources = ARRAY_SIZE(dove_uart0_resources), +}; + +void __init dove_uart0_init(void) +{ + platform_device_register(&dove_uart0); +} + +/***************************************************************************** + * UART1 + ****************************************************************************/ +static struct plat_serial8250_port dove_uart1_data[] = { + { + .mapbase = DOVE_UART1_PHYS_BASE, + .membase = (char *)DOVE_UART1_VIRT_BASE, + .irq = IRQ_DOVE_UART_1, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 0, + }, { + }, +}; + +static struct resource dove_uart1_resources[] = { + { + .start = DOVE_UART1_PHYS_BASE, + .end = DOVE_UART1_PHYS_BASE + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_UART_1, + .end = IRQ_DOVE_UART_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_uart1 = { + .name = "serial8250", + .id = 1, + .dev = { + .platform_data = dove_uart1_data, + }, + .resource = dove_uart1_resources, + .num_resources = ARRAY_SIZE(dove_uart1_resources), +}; + +void __init dove_uart1_init(void) +{ + platform_device_register(&dove_uart1); +} + +/***************************************************************************** + * UART2 + ****************************************************************************/ +static struct plat_serial8250_port dove_uart2_data[] = { + { + .mapbase = DOVE_UART2_PHYS_BASE, + .membase = (char *)DOVE_UART2_VIRT_BASE, + .irq = IRQ_DOVE_UART_2, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 0, + }, { + }, +}; + +static struct resource dove_uart2_resources[] = { + { + .start = DOVE_UART2_PHYS_BASE, + .end = DOVE_UART2_PHYS_BASE + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_UART_2, + .end = IRQ_DOVE_UART_2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_uart2 = { + .name = "serial8250", + .id = 2, + .dev = { + .platform_data = dove_uart2_data, + }, + .resource = dove_uart2_resources, + .num_resources = ARRAY_SIZE(dove_uart2_resources), +}; + +void __init dove_uart2_init(void) +{ + platform_device_register(&dove_uart2); +} + +/***************************************************************************** + * UART3 + ****************************************************************************/ +static struct plat_serial8250_port dove_uart3_data[] = { + { + .mapbase = DOVE_UART3_PHYS_BASE, + .membase = (char *)DOVE_UART3_VIRT_BASE, + .irq = IRQ_DOVE_UART_3, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 0, + }, { + }, +}; + +static struct resource dove_uart3_resources[] = { + { + .start = DOVE_UART3_PHYS_BASE, + .end = DOVE_UART3_PHYS_BASE + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_UART_3, + .end = IRQ_DOVE_UART_3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_uart3 = { + .name = "serial8250", + .id = 3, + .dev = { + .platform_data = dove_uart3_data, + }, + .resource = dove_uart3_resources, + .num_resources = ARRAY_SIZE(dove_uart3_resources), +}; + +void __init dove_uart3_init(void) +{ + platform_device_register(&dove_uart3); +} + +/***************************************************************************** + * SPI0 + ****************************************************************************/ +static struct orion_spi_info dove_spi0_data = { + .tclk = 0, +}; + +static struct resource dove_spi0_resources[] = { + { + .start = DOVE_SPI0_PHYS_BASE, + .end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_SPI0, + .end = IRQ_DOVE_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_spi0 = { + .name = "orion_spi", + .id = 0, + .resource = dove_spi0_resources, + .dev = { + .platform_data = &dove_spi0_data, + }, + .num_resources = ARRAY_SIZE(dove_spi0_resources), +}; + +void __init dove_spi0_init(void) +{ + platform_device_register(&dove_spi0); +} + +/***************************************************************************** + * SPI1 + ****************************************************************************/ +static struct orion_spi_info dove_spi1_data = { + .tclk = 0, +}; + +static struct resource dove_spi1_resources[] = { + { + .start = DOVE_SPI1_PHYS_BASE, + .end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_SPI1, + .end = IRQ_DOVE_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_spi1 = { + .name = "orion_spi", + .id = 1, + .resource = dove_spi1_resources, + .dev = { + .platform_data = &dove_spi1_data, + }, + .num_resources = ARRAY_SIZE(dove_spi1_resources), +}; + +void __init dove_spi1_init(void) +{ + platform_device_register(&dove_spi1); +} + +/***************************************************************************** + * I2C + ****************************************************************************/ +static struct mv64xxx_i2c_pdata dove_i2c_data = { + .freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource dove_i2c_resources[] = { + { + .name = "i2c base", + .start = DOVE_I2C_PHYS_BASE, + .end = DOVE_I2C_PHYS_BASE + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c irq", + .start = IRQ_DOVE_I2C, + .end = IRQ_DOVE_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(dove_i2c_resources), + .resource = dove_i2c_resources, + .dev = { + .platform_data = &dove_i2c_data, + }, +}; + +void __init dove_i2c_init(void) +{ + platform_device_register(&dove_i2c); +} + +/***************************************************************************** + * Time handling + ****************************************************************************/ +static int get_tclk(void) +{ + /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ + return 166666667; +} + +static void dove_timer_init(void) +{ + orion_time_init(IRQ_DOVE_BRIDGE, get_tclk()); +} + +struct sys_timer dove_timer = { + .init = dove_timer_init, +}; + +/***************************************************************************** + * XOR + ****************************************************************************/ +static struct mv_xor_platform_shared_data dove_xor_shared_data = { + .dram = &dove_mbus_dram_info, +}; + +/***************************************************************************** + * XOR 0 + ****************************************************************************/ +static u64 dove_xor0_dmamask = DMA_BIT_MASK(32); + +static struct resource dove_xor0_shared_resources[] = { + { + .name = "xor 0 low", + .start = DOVE_XOR0_PHYS_BASE, + .end = DOVE_XOR0_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .name = "xor 0 high", + .start = DOVE_XOR0_HIGH_PHYS_BASE, + .end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dove_xor0_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 0, + .dev = { + .platform_data = &dove_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(dove_xor0_shared_resources), + .resource = dove_xor0_shared_resources, +}; + +static struct resource dove_xor00_resources[] = { + [0] = { + .start = IRQ_DOVE_XOR_00, + .end = IRQ_DOVE_XOR_00, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data dove_xor00_data = { + .shared = &dove_xor0_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device dove_xor00_channel = { + .name = MV_XOR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(dove_xor00_resources), + .resource = dove_xor00_resources, + .dev = { + .dma_mask = &dove_xor0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = (void *)&dove_xor00_data, + }, +}; + +static struct resource dove_xor01_resources[] = { + [0] = { + .start = IRQ_DOVE_XOR_01, + .end = IRQ_DOVE_XOR_01, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data dove_xor01_data = { + .shared = &dove_xor0_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device dove_xor01_channel = { + .name = MV_XOR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(dove_xor01_resources), + .resource = dove_xor01_resources, + .dev = { + .dma_mask = &dove_xor0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = (void *)&dove_xor01_data, + }, +}; + +void __init dove_xor0_init(void) +{ + platform_device_register(&dove_xor0_shared); + + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask); + dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask); + platform_device_register(&dove_xor00_channel); + + dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask); + dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask); + dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask); + platform_device_register(&dove_xor01_channel); +} + +/***************************************************************************** + * XOR 1 + ****************************************************************************/ +static u64 dove_xor1_dmamask = DMA_BIT_MASK(32); + +static struct resource dove_xor1_shared_resources[] = { + { + .name = "xor 0 low", + .start = DOVE_XOR1_PHYS_BASE, + .end = DOVE_XOR1_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .name = "xor 0 high", + .start = DOVE_XOR1_HIGH_PHYS_BASE, + .end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dove_xor1_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &dove_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(dove_xor1_shared_resources), + .resource = dove_xor1_shared_resources, +}; + +static struct resource dove_xor10_resources[] = { + [0] = { + .start = IRQ_DOVE_XOR_10, + .end = IRQ_DOVE_XOR_10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data dove_xor10_data = { + .shared = &dove_xor1_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device dove_xor10_channel = { + .name = MV_XOR_NAME, + .id = 2, + .num_resources = ARRAY_SIZE(dove_xor10_resources), + .resource = dove_xor10_resources, + .dev = { + .dma_mask = &dove_xor1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = (void *)&dove_xor10_data, + }, +}; + +static struct resource dove_xor11_resources[] = { + [0] = { + .start = IRQ_DOVE_XOR_11, + .end = IRQ_DOVE_XOR_11, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data dove_xor11_data = { + .shared = &dove_xor1_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device dove_xor11_channel = { + .name = MV_XOR_NAME, + .id = 3, + .num_resources = ARRAY_SIZE(dove_xor11_resources), + .resource = dove_xor11_resources, + .dev = { + .dma_mask = &dove_xor1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = (void *)&dove_xor11_data, + }, +}; + +void __init dove_xor1_init(void) +{ + platform_device_register(&dove_xor1_shared); + + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask); + dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask); + platform_device_register(&dove_xor10_channel); + + dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask); + dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask); + dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask); + platform_device_register(&dove_xor11_channel); +} + +void __init dove_init(void) +{ + int tclk; + + tclk = get_tclk(); + + printk(KERN_INFO "Dove 88AP510 SoC, "); + printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif + dove_setup_cpu_mbus(); + + dove_ge00_shared_data.t_clk = tclk; + dove_uart0_data[0].uartclk = tclk; + dove_uart1_data[0].uartclk = tclk; + dove_uart2_data[0].uartclk = tclk; + dove_uart3_data[0].uartclk = tclk; + dove_spi0_data.tclk = tclk; + dove_spi1_data.tclk = tclk; + + /* internal devices that every board has */ + dove_rtc_init(); + dove_xor0_init(); + dove_xor1_init(); +} diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h new file mode 100644 index 00000000000..b29e8937de4 --- /dev/null +++ b/arch/arm/mach-dove/common.h @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-dove/common.h + * + * Core functions for Marvell Dove 88AP510 System On Chip + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_DOVE_COMMON_H +#define __ARCH_DOVE_COMMON_H + +struct mv643xx_eth_platform_data; +struct mv_sata_platform_data; + +extern struct sys_timer dove_timer; +extern struct mbus_dram_target_info dove_mbus_dram_info; + +/* + * Basic Dove init functions used early by machine-setup. + */ +void dove_map_io(void); +void dove_init(void); +void dove_init_irq(void); +void dove_setup_cpu_mbus(void); +void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); +void dove_sata_init(struct mv_sata_platform_data *sata_data); +void dove_pcie_init(int init_port0, int init_port1); +void dove_ehci0_init(void); +void dove_ehci1_init(void); +void dove_uart0_init(void); +void dove_uart1_init(void); +void dove_uart2_init(void); +void dove_uart3_init(void); +void dove_spi0_init(void); +void dove_spi1_init(void); +void dove_i2c_init(void); + +#endif diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c new file mode 100644 index 00000000000..f2971b74522 --- /dev/null +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -0,0 +1,102 @@ +/* + * arch/arm/mach-dove/dove-db-setup.c + * + * Marvell DB-MV88AP510-BP Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/timer.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/pci.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <linux/spi/flash.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/dove.h> +#include "common.h" + +static struct mv643xx_eth_platform_data dove_db_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static struct mv_sata_platform_data dove_db_sata_data = { + .n_ports = 1, +}; + +/***************************************************************************** + * SPI Devices: + * SPI0: 4M Flash ST-M25P32-VMF6P + ****************************************************************************/ +static const struct flash_platform_data dove_db_spi_flash_data = { + .type = "m25p64", +}; + +static struct spi_board_info __initdata dove_db_spi_flash_info[] = { + { + .modalias = "m25p80", + .platform_data = &dove_db_spi_flash_data, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ +static int __init dove_db_pci_init(void) +{ + if (machine_is_dove_db()) + dove_pcie_init(1, 1); + + return 0; +} + +subsys_initcall(dove_db_pci_init); + +/***************************************************************************** + * Board Init + ****************************************************************************/ +static void __init dove_db_init(void) +{ + /* + * Basic Dove setup. Needs to be called early. + */ + dove_init(); + + dove_ge00_init(&dove_db_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_sata_init(&dove_db_sata_data); + dove_spi0_init(); + dove_spi1_init(); + dove_uart0_init(); + dove_uart1_init(); + dove_i2c_init(); + spi_register_board_info(dove_db_spi_flash_info, + ARRAY_SIZE(dove_db_spi_flash_info)); +} + +MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") + .phys_io = DOVE_SB_REGS_PHYS_BASE, + .io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = dove_db_init, + .map_io = dove_map_io, + .init_irq = dove_init_irq, + .timer = &dove_timer, +MACHINE_END diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h new file mode 100644 index 00000000000..214a4c31f06 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-dove/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/dove.h> + +#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000) + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CTRL_PCIE0_LINK 0x00000001 +#define CPU_RESET 0x00000002 +#define CPU_CTRL_PCIE1_LINK 0x00000008 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define FIQ_MASK_LOW_OFF 0x0008 +#define ENDPOINT_MASK_LOW_OFF 0x000c +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 +#define FIQ_MASK_HIGH_OFF 0x0018 +#define ENDPOINT_MASK_HIGH_OFF 0x001c +#define PCIE_INTERRUPT_MASK_OFF 0x0020 + +#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF) +#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF) +#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF) +#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF) +#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF) +#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) +#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) + +#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S new file mode 100644 index 00000000000..9b89ec7d304 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-dove/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/bridge-regs.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =DOVE_SB_REGS_PHYS_BASE + ldrne \rx, =DOVE_SB_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h new file mode 100644 index 00000000000..f6a08397f04 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-dove/include/mach/dove.h + * + * Generic definitions for Marvell Dove 88AP510 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_DOVE_H +#define __ASM_ARCH_DOVE_H + +#include <mach/vmalloc.h> + +/* + * Marvell Dove address maps. + * + * phys virt size + * c8000000 fdb00000 1M Cryptographic SRAM + * e0000000 @runtime 128M PCIe-0 Memory space + * e8000000 @runtime 128M PCIe-1 Memory space + * f1000000 fde00000 8M on-chip south-bridge registers + * f1800000 fe600000 8M on-chip north-bridge registers + * f2000000 fee00000 1M PCIe-0 I/O space + * f2100000 fef00000 1M PCIe-1 I/O space + */ + +#define DOVE_CESA_PHYS_BASE 0xc8000000 +#define DOVE_CESA_VIRT_BASE 0xfdb00000 +#define DOVE_CESA_SIZE SZ_1M + +#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 +#define DOVE_PCIE0_MEM_SIZE SZ_128M + +#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000 +#define DOVE_PCIE1_MEM_SIZE SZ_128M + +#define DOVE_BOOTROM_PHYS_BASE 0xf8000000 +#define DOVE_BOOTROM_SIZE SZ_128M + +#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 +#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000 +#define DOVE_SCRATCHPAD_SIZE SZ_1M + +#define DOVE_SB_REGS_PHYS_BASE 0xf1000000 +#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_SB_REGS_SIZE SZ_8M + +#define DOVE_NB_REGS_PHYS_BASE 0xf1800000 +#define DOVE_NB_REGS_VIRT_BASE 0xfe600000 +#define DOVE_NB_REGS_SIZE SZ_8M + +#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 +#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000 +#define DOVE_PCIE0_IO_BUS_BASE 0x00000000 +#define DOVE_PCIE0_IO_SIZE SZ_1M + +#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 +#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000 +#define DOVE_PCIE1_IO_BUS_BASE 0x00100000 +#define DOVE_PCIE1_IO_SIZE SZ_1M + +/* + * Dove Core Registers Map + */ + +/* SPI, I2C, UART */ +#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000) +#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000) +#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000) +#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100) +#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100) +#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200) +#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200) +#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300) +#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300) +#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600) +#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600) + +/* North-South Bridge */ +#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) + +/* Cryptographic Engine */ +#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) + +/* PCIe 0 */ +#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000) + +/* USB */ +#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000) +#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000) + +/* XOR 0 Engine */ +#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800) +#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800) +#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00) +#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00) + +/* XOR 1 Engine */ +#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900) +#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900) +#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00) +#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00) + +/* Gigabit Ethernet */ +#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000) + +/* PCIe 1 */ +#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000) + +/* CAFE */ +#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000) +#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000) +#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000) +#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000) + +/* SATA */ +#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000) + +/* I2S/SPDIF */ +#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000) +#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000) + +/* NAND Flash Controller */ +#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000) + +/* MPP, GPIO, Reset Sampling */ +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) +#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) +#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) +#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) +#define DOVE_NAND_GPIO_EN (1 << 0) +#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40) + + +/* Power Management */ +#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) + +/* Real Time Clock */ +#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) + +/* AC97 */ +#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000) +#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000) + +/* Peripheral DMA */ +#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000) +#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000) + +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) +#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) +#define DOVE_TWSI_OPTION3_GPIO (1 << 22) +#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_ON_AU1 (1 << 0) +#define DOVE_SSP_CLOCK_ENABLE (1 << 1) +#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) +/* Memory Controller */ +#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000) + +/* LCD Controller */ +#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) +#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000) +#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) +#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000) + +/* Graphic Engine */ +#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000) + +/* Video Engine */ +#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000) + +#endif diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S new file mode 100644 index 00000000000..e84c78c2a8b --- /dev/null +++ b/arch/arm/mach-dove/include/mach/entry-macro.S @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-dove/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for Marvell Dove platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/bridge-regs.h> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IRQ_VIRT_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ check low interrupts + ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] + ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] + mov \irqnr, #31 + ands \irqstat, \irqstat, \tmp + + @ if no low interrupts set, check high interrupts + ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] + ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] + moveq \irqnr, #63 + andeqs \irqstat, \irqstat, \tmp + + @ find first active interrupt source + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h new file mode 100644 index 00000000000..0ee70ff39e1 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/gpio.h @@ -0,0 +1,49 @@ +/* + * arch/arm/mach-dove/include/mach/gpio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#include <asm/errno.h> +#include <mach/irqs.h> +#include <plat/gpio.h> +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +#define GPIO_MAX 64 + +#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00) +#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20) + +#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI) + +#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00) +#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04) +#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08) +#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c) +#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10) +#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14) +#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18) +#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c) + +static inline int gpio_to_irq(int pin) +{ + if (pin < NR_GPIO_IRQS) + return pin + IRQ_DOVE_GPIO_START; + + return -EINVAL; +} + +static inline int irq_to_gpio(int irq) +{ + if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS) + return irq - IRQ_DOVE_GPIO_START; + + return -EINVAL; +} + +#endif diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h new file mode 100644 index 00000000000..32b0826e787 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/hardware.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-dove/include/mach/hardware.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "dove.h" + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE + + +/* Macros below are required for compatibility with PXA AC'97 driver. */ +#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \ + DOVE_SB_REGS_VIRT_BASE))) +#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \ + DOVE_SB_REGS_PHYS_BASE) +#endif diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h new file mode 100644 index 00000000000..3b3e4721ce2 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-dove/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "dove.h" + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\ + DOVE_PCIE0_IO_VIRT_BASE)) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h new file mode 100644 index 00000000000..46681466f92 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/irqs.h @@ -0,0 +1,101 @@ +/* + * arch/arm/mach-dove/include/mach/irqs.h + * + * IRQ definitions for Marvell Dove 88AP510 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +/* + * Dove Low Interrupt Controller + */ +#define IRQ_DOVE_BRIDGE 0 +#define IRQ_DOVE_H2C 1 +#define IRQ_DOVE_C2H 2 +#define IRQ_DOVE_NAND 3 +#define IRQ_DOVE_PDMA 4 +#define IRQ_DOVE_SPI1 5 +#define IRQ_DOVE_SPI0 6 +#define IRQ_DOVE_UART_0 7 +#define IRQ_DOVE_UART_1 8 +#define IRQ_DOVE_UART_2 9 +#define IRQ_DOVE_UART_3 10 +#define IRQ_DOVE_I2C 11 +#define IRQ_DOVE_GPIO_0_7 12 +#define IRQ_DOVE_GPIO_8_15 13 +#define IRQ_DOVE_GPIO_16_23 14 +#define IRQ_DOVE_PCIE0_ERR 15 +#define IRQ_DOVE_PCIE0 16 +#define IRQ_DOVE_PCIE1_ERR 17 +#define IRQ_DOVE_PCIE1 18 +#define IRQ_DOVE_I2S0 19 +#define IRQ_DOVE_I2S0_ERR 20 +#define IRQ_DOVE_I2S1 21 +#define IRQ_DOVE_I2S1_ERR 22 +#define IRQ_DOVE_USB_ERR 23 +#define IRQ_DOVE_USB0 24 +#define IRQ_DOVE_USB1 25 +#define IRQ_DOVE_GE00_RX 26 +#define IRQ_DOVE_GE00_TX 27 +#define IRQ_DOVE_GE00_MISC 28 +#define IRQ_DOVE_GE00_SUM 29 +#define IRQ_DOVE_GE00_ERR 30 +#define IRQ_DOVE_CRYPTO 31 + +/* + * Dove High Interrupt Controller + */ +#define IRQ_DOVE_AC97 32 +#define IRQ_DOVE_PMU 33 +#define IRQ_DOVE_CAM 34 +#define IRQ_DOVE_SDIO0 35 +#define IRQ_DOVE_SDIO1 36 +#define IRQ_DOVE_SDIO0_WAKEUP 37 +#define IRQ_DOVE_SDIO1_WAKEUP 38 +#define IRQ_DOVE_XOR_00 39 +#define IRQ_DOVE_XOR_01 40 +#define IRQ_DOVE_XOR0_ERR 41 +#define IRQ_DOVE_XOR_10 42 +#define IRQ_DOVE_XOR_11 43 +#define IRQ_DOVE_XOR1_ERR 44 +#define IRQ_DOVE_LCD_DCON 45 +#define IRQ_DOVE_LCD1 46 +#define IRQ_DOVE_LCD0 47 +#define IRQ_DOVE_GPU 48 +#define IRQ_DOVE_PERFORM_MNTR 49 +#define IRQ_DOVE_VPRO_DMA1 51 +#define IRQ_DOVE_SSP_TIMER 54 +#define IRQ_DOVE_SSP 55 +#define IRQ_DOVE_MC_L2_ERR 56 +#define IRQ_DOVE_CRYPTO_ERR 59 +#define IRQ_DOVE_GPIO_24_31 60 +#define IRQ_DOVE_HIGH_GPIO 61 +#define IRQ_DOVE_SATA 62 + +/* + * DOVE General Purpose Pins + */ +#define IRQ_DOVE_GPIO_START 64 +#define NR_GPIO_IRQS 64 + +/* + * PMU interrupts + */ +#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS) +#define NR_PMU_IRQS 7 +#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5) + +#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) + +/* Required for compatability with PXA AC97 driver. */ +#define IRQ_AC97 IRQ_DOVE_AC97 +/* Required for compatability with PXA DMA driver. */ +#define IRQ_DMA IRQ_DOVE_PDMA +/* Required for compatability with PXA NAND driver */ +#define IRQ_NAND IRQ_DOVE_NAND +#endif diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h new file mode 100644 index 00000000000..d6687207494 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/memory.h @@ -0,0 +1,10 @@ +/* + * arch/arm/mach-dove/include/mach/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h new file mode 100644 index 00000000000..3ad9f946a9e --- /dev/null +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -0,0 +1,54 @@ +/* + * arch/arm/mach-dove/include/mach/pm.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_PM_H +#define __ASM_ARCH_PM_H + +#include <asm/errno.h> +#include <mach/irqs.h> + +#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) +#define CLOCK_GATING_USB0_MASK (1 << 0) +#define CLOCK_GATING_USB1_MASK (1 << 1) +#define CLOCK_GATING_GBE_MASK (1 << 2) +#define CLOCK_GATING_SATA_MASK (1 << 3) +#define CLOCK_GATING_PCIE0_MASK (1 << 4) +#define CLOCK_GATING_PCIE1_MASK (1 << 5) +#define CLOCK_GATING_SDIO0_MASK (1 << 8) +#define CLOCK_GATING_SDIO1_MASK (1 << 9) +#define CLOCK_GATING_NAND_MASK (1 << 10) +#define CLOCK_GATING_CAMERA_MASK (1 << 11) +#define CLOCK_GATING_I2S0_MASK (1 << 12) +#define CLOCK_GATING_I2S1_MASK (1 << 13) +#define CLOCK_GATING_CRYPTO_MASK (1 << 15) +#define CLOCK_GATING_AC97_MASK (1 << 21) +#define CLOCK_GATING_PDMA_MASK (1 << 22) +#define CLOCK_GATING_XOR0_MASK (1 << 23) +#define CLOCK_GATING_XOR1_MASK (1 << 24) +#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30) + +#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) +#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) + +static inline int pmu_to_irq(int pin) +{ + if (pin < NR_PMU_IRQS) + return pin + IRQ_DOVE_PMU_START; + + return -EINVAL; +} + +static inline int irq_to_pmu(int irq) +{ + if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + return irq - IRQ_DOVE_PMU_START; + + return -EINVAL; +} + +#endif diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h new file mode 100644 index 00000000000..356afda5685 --- /dev/null +++ b/arch/arm/mach-dove/include/mach/system.h @@ -0,0 +1,36 @@ +/* + * arch/arm/mach-dove/include/mach/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <mach/bridge-regs.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + + +#endif diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h new file mode 100644 index 00000000000..251d538541d --- /dev/null +++ b/arch/arm/mach-dove/include/mach/timex.h @@ -0,0 +1,9 @@ +/* + * arch/arm/mach-dove/include/mach/timex.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h new file mode 100644 index 00000000000..2c5cdd7a3ee --- /dev/null +++ b/arch/arm/mach-dove/include/mach/uncompress.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-dove/include/mach/uncompress.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/dove.h> + +#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0)) +#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14)) + +#define LSR_THRE 0x20 + +static void putc(const char c) +{ + int i; + + for (i = 0; i < 0x1000; i++) { + /* Transmit fifo not full? */ + if (*UART_LSR & LSR_THRE) + break; + } + + *UART_THR = c; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h new file mode 100644 index 00000000000..8b2c974755c --- /dev/null +++ b/arch/arm/mach-dove/include/mach/vmalloc.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-dove/include/mach/vmalloc.h + */ + +#define VMALLOC_END 0xfd800000 diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c new file mode 100644 index 00000000000..61bfcb3b08c --- /dev/null +++ b/arch/arm/mach-dove/irq.c @@ -0,0 +1,133 @@ +/* + * arch/arm/mach-dove/irq.c + * + * Dove IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <asm/mach/arch.h> +#include <plat/irq.h> +#include <asm/mach/irq.h> +#include <mach/pm.h> +#include <mach/bridge-regs.h> +#include "common.h" + +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + int irqoff; + BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO); + + irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 : + 3 + irq - IRQ_DOVE_GPIO_24_31; + + orion_gpio_irq_handler(irqoff << 3); + if (irq == IRQ_DOVE_HIGH_GPIO) { + orion_gpio_irq_handler(40); + orion_gpio_irq_handler(48); + orion_gpio_irq_handler(56); + } +} + +static void pmu_irq_mask(unsigned int irq) +{ + int pin = irq_to_pmu(irq); + u32 u; + + u = readl(PMU_INTERRUPT_MASK); + u &= ~(1 << (pin & 31)); + writel(u, PMU_INTERRUPT_MASK); +} + +static void pmu_irq_unmask(unsigned int irq) +{ + int pin = irq_to_pmu(irq); + u32 u; + + u = readl(PMU_INTERRUPT_MASK); + u |= 1 << (pin & 31); + writel(u, PMU_INTERRUPT_MASK); +} + +static void pmu_irq_ack(unsigned int irq) +{ + int pin = irq_to_pmu(irq); + u32 u; + + u = ~(1 << (pin & 31)); + writel(u, PMU_INTERRUPT_CAUSE); +} + +static struct irq_chip pmu_irq_chip = { + .name = "pmu_irq", + .mask = pmu_irq_mask, + .unmask = pmu_irq_unmask, + .ack = pmu_irq_ack, +}; + +static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long cause = readl(PMU_INTERRUPT_CAUSE); + + cause &= readl(PMU_INTERRUPT_MASK); + if (cause == 0) { + do_bad_IRQ(irq, desc); + return; + } + + for (irq = 0; irq < NR_PMU_IRQS; irq++) { + if (!(cause & (1 << irq))) + continue; + irq = pmu_to_irq(irq); + desc = irq_desc + irq; + desc_handle_irq(irq, desc); + } +} + +void __init dove_init_irq(void) +{ + int i; + + orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); + orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + + /* + * Mask and clear GPIO IRQ interrupts. + */ + writel(0, GPIO_LEVEL_MASK(0)); + writel(0, GPIO_EDGE_MASK(0)); + writel(0, GPIO_EDGE_CAUSE(0)); + + /* + * Mask and clear PMU interrupts + */ + writel(0, PMU_INTERRUPT_MASK); + writel(0, PMU_INTERRUPT_CAUSE); + + for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) { + set_irq_chip(i, &orion_gpio_irq_chip); + set_irq_handler(i, handle_level_irq); + irq_desc[i].status |= IRQ_LEVEL; + set_irq_flags(i, IRQF_VALID); + } + set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); + set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); + + for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { + set_irq_chip(i, &pmu_irq_chip); + set_irq_handler(i, handle_level_irq); + irq_desc[i].status |= IRQ_LEVEL; + set_irq_flags(i, IRQF_VALID); + } + set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler); +} diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c new file mode 100644 index 00000000000..502d1ca2f4b --- /dev/null +++ b/arch/arm/mach-dove/pcie.c @@ -0,0 +1,238 @@ +/* + * arch/arm/mach-dove/pcie.c + * + * PCIe functions for Marvell Dove 88AP510 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/mach/arch.h> +#include <asm/setup.h> +#include <asm/delay.h> +#include <plat/pcie.h> +#include <mach/irqs.h> +#include <mach/bridge-regs.h> +#include "common.h" + +struct pcie_port { + u8 index; + u8 root_bus_nr; + void __iomem *base; + spinlock_t conf_lock; + char io_space_name[16]; + char mem_space_name[16]; + struct resource res[2]; +}; + +static struct pcie_port pcie_port[2]; +static int num_pcie_ports; + + +static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct pcie_port *pp; + + if (nr >= num_pcie_ports) + return 0; + + pp = &pcie_port[nr]; + pp->root_bus_nr = sys->busnr; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_set_local_bus_nr(pp->base, sys->busnr); + + orion_pcie_setup(pp->base, &dove_mbus_dram_info); + + /* + * IORESOURCE_IO + */ + snprintf(pp->io_space_name, sizeof(pp->io_space_name), + "PCIe %d I/O", pp->index); + pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; + pp->res[0].name = pp->io_space_name; + if (pp->index == 0) { + pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE; + pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1; + } else { + pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE; + pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1; + } + pp->res[0].flags = IORESOURCE_IO; + if (request_resource(&ioport_resource, &pp->res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &pp->res[0]; + + /* + * IORESOURCE_MEM + */ + snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), + "PCIe %d MEM", pp->index); + pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; + pp->res[1].name = pp->mem_space_name; + if (pp->index == 0) { + pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE; + pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1; + } else { + pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE; + pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1; + } + pp->res[1].flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &pp->res[1]; + + sys->resource[2] = NULL; + + return 1; +} + +static struct pcie_port *bus_to_port(int bus) +{ + int i; + + for (i = num_pcie_ports - 1; i >= 0; i--) { + int rbus = pcie_port[i].root_bus_nr; + if (rbus != -1 && rbus <= bus) + break; + } + + return i >= 0 ? pcie_port + i : NULL; +} + +static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) +{ + /* + * Don't go out when trying to access nonexisting devices + * on the local bus. + */ + if (bus == pp->root_bus_nr && dev > 1) + return 0; + + return 1; +} + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct pcie_port *pp = bus_to_port(bus->number); + unsigned long flags; + int ret; + + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct pcie_port *pp = bus_to_port(bus->number); + unsigned long flags; + int ret; + + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +static struct pci_bus __init * +dove_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr < num_pcie_ports) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} + +static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pcie_port *pp = bus_to_port(dev->bus->number); + + return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0; +} + +static struct hw_pci dove_pci __initdata = { + .nr_controllers = 2, + .swizzle = pci_std_swizzle, + .setup = dove_pcie_setup, + .scan = dove_pcie_scan_bus, + .map_irq = dove_pcie_map_irq, +}; + +static void __init add_pcie_port(int index, unsigned long base) +{ + printk(KERN_INFO "Dove PCIe port %d: ", index); + + if (orion_pcie_link_up((void __iomem *)base)) { + struct pcie_port *pp = &pcie_port[num_pcie_ports++]; + + printk(KERN_INFO "link up\n"); + + pp->index = index; + pp->root_bus_nr = -1; + pp->base = (void __iomem *)base; + spin_lock_init(&pp->conf_lock); + memset(pp->res, 0, sizeof(pp->res)); + } else { + printk(KERN_INFO "link down, ignoring\n"); + } +} + +void __init dove_pcie_init(int init_port0, int init_port1) +{ + if (init_port0) + add_pcie_port(0, DOVE_PCIE0_VIRT_BASE); + + if (init_port1) + add_pcie_port(1, DOVE_PCIE1_VIRT_BASE); + + pci_common_init(&dove_pci); +} diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index d6d52527589..f1c00d6d560 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -20,7 +20,6 @@ #define IOP13XX_CORE_FREQ_1200 (5 << 16) void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); static inline unsigned long iop13xx_core_freq(void) { @@ -66,6 +65,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void) return 2; } +static inline u32 read_tmr0(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val)); + return val; +} + static inline void write_tmr0(u32 val) { asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val)); @@ -83,6 +89,11 @@ static inline u32 read_tcr0(void) return val; } +static inline void write_tcr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val)); +} + static inline u32 read_tcr1(void) { u32 val; @@ -90,6 +101,11 @@ static inline u32 read_tcr1(void) return val; } +static inline void write_tcr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val)); +} + static inline void write_trr0(u32 val) { asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val)); diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 5051c03d437..f91f3154577 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -87,7 +87,6 @@ static void __init iq81340mc_timer_init(void) static struct sys_timer iq81340mc_timer = { .init = iq81340mc_timer_init, - .offset = iop_gettimeoffset, }; MACHINE_START(IQ81340MC, "Intel IQ81340MC") diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index bc443073a8e..ddb7a3435de 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -89,7 +89,6 @@ static void __init iq81340sc_timer_init(void) static struct sys_timer iq81340sc_timer = { .init = iq81340sc_timer_init, - .offset = iop_gettimeoffset, }; MACHINE_START(IQ81340SC, "Intel IQ81340SC") diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 3ad4696ade4..2bef9b6e1cc 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -42,7 +42,6 @@ static void __init em7210_timer_init(void) static struct sys_timer em7210_timer = { .init = em7210_timer_init, - .offset = iop_gettimeoffset, }; /* diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index a9c2dfdb250..93370a46b62 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -47,7 +47,6 @@ static void __init glantank_timer_init(void) static struct sys_timer glantank_timer = { .init = glantank_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index dd1cd990451..a7a08dda7f3 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -78,7 +78,6 @@ static void __init iq31244_timer_init(void) static struct sys_timer iq31244_timer = { .init = iq31244_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index fbe27798759..0200f80c1e1 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -46,7 +46,6 @@ static void __init iq80321_timer_init(void) static struct sys_timer iq80321_timer = { .init = iq80321_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index d2e42789972..2a5c637639b 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -53,7 +53,6 @@ static void __init n2100_timer_init(void) static struct sys_timer n2100_timer = { .init = n2100_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index d51e10cddf2..394e95a30b7 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -48,7 +48,6 @@ static void __init iq80331_timer_init(void) static struct sys_timer iq80331_timer = { .init = iq80331_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 92fb44cdbca..a40badf126c 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -48,7 +48,6 @@ static void __init iq80332_timer_init(void) static struct sys_timer iq80332_timer = { .init = iq80332_timer_init, - .offset = iop_gettimeoffset, }; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 0aca451b216..8bf09ae5b34 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG Marvell SheevaPlug Reference Board. config MACH_TS219 - bool "QNAP TS-119 and TS-219 Turbo NAS" + bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS" help Say 'Y' here if you want your kernel to support the - QNAP TS-119 and TS-219 Turbo NAS devices. + QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS + devices. + +config MACH_TS41X + bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS + devices. config MACH_OPENRD_BASE bool "Marvell OpenRD Base Board" diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 80ab0ec90ee..9f2f67b2b63 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index ec1a64f263d..2830f0fe80e 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -1,6 +1,6 @@ /* * - * QNAP TS-119/TS-219 Turbo NAS Board Setup + * QNAP TS-11x/TS-21x Turbo NAS Board Setup * * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> @@ -14,87 +14,17 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> #include <linux/gpio_keys.h> #include <linux/input.h> -#include <linux/timex.h> -#include <linux/serial_reg.h> -#include <linux/pci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" #include "mpp.h" - -/**************************************************************************** - * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * the QNAP firmware. - * Layout as used by QNAP: - * 0x00000000-0x00080000 : "U-Boot" - * 0x00200000-0x00400000 : "Kernel" - * 0x00400000-0x00d00000 : "RootFS" - * 0x00d00000-0x01000000 : "RootFS2" - * 0x00080000-0x000c0000 : "U-Boot Config" - * 0x000c0000-0x00200000 : "NAS Config" - * - * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout - * used by the QNAP TS-109/TS-209. - * - ***************************************************************************/ - -static struct mtd_partition qnap_ts219_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00200000, - }, { - .name = "RootFS1", - .size = 0x00900000, - .offset = 0x00400000, - }, { - .name = "RootFS2", - .size = 0x00300000, - .offset = 0x00d00000, - }, { - .name = "U-Boot Config", - .size = 0x00040000, - .offset = 0x00080000, - }, { - .name = "NAS Config", - .size = 0x00140000, - .offset = 0x000c0000, - }, -}; - -static const struct flash_platform_data qnap_ts219_flash = { - .type = "m25p128", - .name = "spi_flash", - .parts = qnap_ts219_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts219_partitions), -}; - -static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &qnap_ts219_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "tsx1x-common.h" static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), @@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ 0 }; - -/***************************************************************************** - * QNAP TS-x19 specific power off method via UART1-attached PIC - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -void qnap_ts219_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack UART1 and reset into sane state (19200,8n1) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x03, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x00, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); -} - static void __init qnap_ts219_init(void) { /* @@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void) kirkwood_uart0_init(); kirkwood_uart1_init(); /* A PIC controller is connected here. */ - spi_register_board_info(qnap_ts219_spi_slave_info, - ARRAY_SIZE(qnap_ts219_spi_slave_info)); - kirkwood_spi_init(); + qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); kirkwood_ge00_init(&qnap_ts219_ge00_data); @@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void) kirkwood_ehci_init(); platform_device_register(&qnap_ts219_button_device); - pm_power_off = qnap_ts219_power_off; + pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c new file mode 100644 index 00000000000..de49c2d9e74 --- /dev/null +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -0,0 +1,154 @@ +/* + * + * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" +#include "tsx1x-common.h" + +static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { + I2C_BOARD_INFO("s35390a", 0x30), +}; + +static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data qnap_ts41x_sata_data = { + .n_ports = 2, +}; + +static struct gpio_keys_button qnap_ts41x_buttons[] = { + { + .code = KEY_COPY, + .gpio = 43, + .desc = "USB Copy", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 37, + .desc = "Reset", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data qnap_ts41x_button_data = { + .buttons = qnap_ts41x_buttons, + .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons), +}; + +static struct platform_device qnap_ts41x_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &qnap_ts41x_button_data, + } +}; + +static unsigned int qnap_ts41x_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_PEX_RST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_SATA0_ACTn, + MPP16_SATA1_ACTn, + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button */ + MPP43_GPIO, /* USB Copy button */ + MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */ + MPP45_GPIO, /* JP1: 0: console, 1: LCD */ + MPP46_GPIO, /* External SATA HDD1 error indicator */ + MPP47_GPIO, /* External SATA HDD2 error indicator */ + MPP48_GPIO, /* External SATA HDD3 error indicator */ + MPP49_GPIO, /* External SATA HDD4 error indicator */ + 0 +}; + +static void __init qnap_ts41x_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(qnap_ts41x_mpp_config); + + kirkwood_uart0_init(); + kirkwood_uart1_init(); /* A PIC controller is connected here. */ + qnap_tsx1x_register_flash(); + kirkwood_i2c_init(); + i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); + kirkwood_ge00_init(&qnap_ts41x_ge00_data); + kirkwood_ge01_init(&qnap_ts41x_ge01_data); + kirkwood_sata_init(&qnap_ts41x_sata_data); + kirkwood_ehci_init(); + platform_device_register(&qnap_ts41x_button_device); + + pm_power_off = qnap_tsx1x_power_off; + +} + +static int __init ts41x_pci_init(void) +{ + if (machine_is_ts41x()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(ts41x_pci_init); + +MACHINE_START(TS41X, "QNAP TS-41x") + /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = qnap_ts41x_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c new file mode 100644 index 00000000000..7221c20b2af --- /dev/null +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -0,0 +1,113 @@ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <linux/serial_reg.h> +#include <mach/kirkwood.h> +#include "common.h" + +/* + * QNAP TS-x1x Boards flash + */ + +/**************************************************************************** + * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * the QNAP firmware. + * Layout as used by QNAP: + * 0x00000000-0x00080000 : "U-Boot" + * 0x00200000-0x00400000 : "Kernel" + * 0x00400000-0x00d00000 : "RootFS" + * 0x00d00000-0x01000000 : "RootFS2" + * 0x00080000-0x000c0000 : "U-Boot Config" + * 0x000c0000-0x00200000 : "NAS Config" + * + * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout + * used by the QNAP TS-109/TS-209. + * + ***************************************************************************/ + +struct mtd_partition qnap_tsx1x_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0x00200000, + }, { + .name = "RootFS1", + .size = 0x00900000, + .offset = 0x00400000, + }, { + .name = "RootFS2", + .size = 0x00300000, + .offset = 0x00d00000, + }, { + .name = "U-Boot Config", + .size = 0x00040000, + .offset = 0x00080000, + }, { + .name = "NAS Config", + .size = 0x00140000, + .offset = 0x000c0000, + }, +}; + +const struct flash_platform_data qnap_tsx1x_flash = { + .type = "m25p128", + .name = "spi_flash", + .parts = qnap_tsx1x_partitions, + .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), +}; + +struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &qnap_tsx1x_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +void qnap_tsx1x_register_flash(void) +{ + spi_register_board_info(qnap_tsx1x_spi_slave_info, + ARRAY_SIZE(qnap_tsx1x_spi_slave_info)); + kirkwood_spi_init(); +} + + +/***************************************************************************** + * QNAP TS-x1x specific power off method via UART1-attached PIC + ****************************************************************************/ + +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) + +void qnap_tsx1x_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h new file mode 100644 index 00000000000..9a592962a6e --- /dev/null +++ b/arch/arm/mach-kirkwood/tsx1x-common.h @@ -0,0 +1,7 @@ +#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H +#define __ARCH_KIRKWOOD_TSX1X_COMMON_H + +extern void qnap_tsx1x_register_flash(void); +extern void qnap_tsx1x_power_off(void); + +#endif diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 4562452d407..a2d307ec042 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -13,6 +13,9 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -85,12 +88,48 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct mtd_partition aspenite_nand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_8M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (SZ_2M + SZ_1M), + .mask_flags = 0, + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = SZ_48M, + .mask_flags = 0, + } +}; + +static struct pxa3xx_nand_platform_data aspenite_nand_info = { + .enable_arbiter = 1, + .parts = aspenite_nand_partitions, + .nr_parts = ARRAY_SIZE(aspenite_nand_partitions), +}; + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); /* on-chip devices */ pxa168_add_uart(1); + pxa168_add_nand(&aspenite_nand_info); /* off-chip devices */ platform_device_register(&smc91x_device); diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 2d9cc5a7122..2a46ed5cc2a 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = { .disable = apbc_clk_disable, }; +static void apmu_clk_enable(struct clk *clk) +{ + __raw_writel(clk->enable_val, clk->clk_rst); +} + +static void apmu_clk_disable(struct clk *clk) +{ + __raw_writel(0, clk->clk_rst); +} + +struct clkops apmu_clk_ops = { + .enable = apmu_clk_enable, + .disable = apmu_clk_disable, +}; + static DEFINE_SPINLOCK(clocks_lock); int clk_enable(struct clk *clk) diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index ed967e78e6a..eefffbe683b 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -25,6 +25,7 @@ struct clk { }; extern struct clkops apbc_clk_ops; +extern struct clkops apmu_clk_ops; #define APBC_CLK(_name, _reg, _fnclksel, _rate) \ struct clk clk_##_name = { \ diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index 16295cfd5e2..d68871b0f28 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -31,7 +31,9 @@ #define IRQ_PXA168_DDR_INT 26 #define IRQ_PXA168_UART1 27 #define IRQ_PXA168_UART2 28 +#define IRQ_PXA168_UART3 29 #define IRQ_PXA168_WDT 35 +#define IRQ_PXA168_MAIN_PMU 36 #define IRQ_PXA168_FRQ_CHANGE 38 #define IRQ_PXA168_SDH1 39 #define IRQ_PXA168_SDH2 40 @@ -46,7 +48,7 @@ #define IRQ_PXA168_USB2 51 #define IRQ_PXA168_AC97 57 #define IRQ_PXA168_TWSI1 58 -#define IRQ_PXA168_PMU 60 +#define IRQ_PXA168_AP_PMU 60 #define IRQ_PXA168_SM_INT 63 /* diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 6bf1f0eefcd..3ad612cbdf0 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -4,6 +4,7 @@ #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; @@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1; extern struct pxa_device_desc pxa168_device_pwm2; extern struct pxa_device_desc pxa168_device_pwm3; extern struct pxa_device_desc pxa168_device_pwm4; +extern struct pxa_device_desc pxa168_device_nand; static inline int pxa168_add_uart(int id) { @@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) +{ + return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); +} #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 6ae1ed7a0a9..4f0b4ec6f5d 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -4,6 +4,7 @@ #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; @@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1; extern struct pxa_device_desc pxa910_device_pwm2; extern struct pxa_device_desc pxa910_device_pwm3; extern struct pxa_device_desc pxa910_device_pwm4; +extern struct pxa_device_desc pxa910_device_nand; static inline int pxa910_add_uart(int id) { @@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info) +{ + return pxa_register_device(&pxa910_device_nand, info, sizeof(*info)); +} #endif /* __ASM_MACH_PXA910_H */ diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 71b1ae33875..37dbdde17fa 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -19,6 +19,7 @@ #include <mach/addr-map.h> #include <mach/cputype.h> #include <mach/regs-apbc.h> +#include <mach/regs-apmu.h> #include <mach/irqs.h> #include <mach/gpio.h> #include <mach/dma.h> @@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APMU_CLK(nand, NAND, 0x01db, 208000000); + /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), @@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), }; static int __init pxa168_init(void) @@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); +PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 5882ca6b49f..d4049508a4d 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); +static APMU_CLK(nand, NAND, 0x01db, 208000000); + /* device and clock bindings */ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), @@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), }; static int __init pxa910_init(void) @@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10); PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); +PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 08cfef6c92a..8f49b2b1260 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -11,9 +11,13 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/onenand.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/flash.h> #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> @@ -26,6 +30,86 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ GPIO47_UART2_RXD, GPIO48_UART2_TXD, + + /* DFI */ + DF_IO0_ND_IO0, + DF_IO1_ND_IO1, + DF_IO2_ND_IO2, + DF_IO3_ND_IO3, + DF_IO4_ND_IO4, + DF_IO5_ND_IO5, + DF_IO6_ND_IO6, + DF_IO7_ND_IO7, + DF_IO8_ND_IO8, + DF_IO9_ND_IO9, + DF_IO10_ND_IO10, + DF_IO11_ND_IO11, + DF_IO12_ND_IO12, + DF_IO13_ND_IO13, + DF_IO14_ND_IO14, + DF_IO15_ND_IO15, + DF_nCS0_SM_nCS2_nCS0, + DF_ALE_SM_WEn_ND_ALE, + DF_CLE_SM_OEn_ND_CLE, + DF_WEn_DF_WEn, + DF_REn_DF_REn, + DF_RDY0_DF_RDY0, +}; + +static struct mtd_partition ttc_dkb_onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_8M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (SZ_2M + SZ_1M), + .mask_flags = 0, + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = SZ_48M, + .mask_flags = 0, + } +}; + +static struct onenand_platform_data ttc_dkb_onenand_info = { + .parts = ttc_dkb_onenand_partitions, + .nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions), +}; + +static struct resource ttc_dkb_resource_onenand[] = { + [0] = { + .start = SMC_CS0_PHYS_BASE, + .end = SMC_CS0_PHYS_BASE + SZ_1M, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ttc_dkb_device_onenand = { + .name = "onenand-flash", + .id = -1, + .resource = ttc_dkb_resource_onenand, + .num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand), + .dev = { + .platform_data = &ttc_dkb_onenand_info, + }, +}; + +static struct platform_device *ttc_dkb_devices[] = { + &ttc_dkb_device_onenand, }; static void __init ttc_dkb_init(void) @@ -34,6 +118,9 @@ static void __init ttc_dkb_init(void) /* on-chip devices */ pxa910_add_uart(1); + + /* off-chip devices */ + platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index c8a2eac4d13..b96c6a38936 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -6,11 +6,13 @@ choice config MACH_MX21 bool "i.MX21 support" + select ARCH_MXC_AUDMUX_V1 help This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" + select ARCH_MXC_AUDMUX_V1 help This enables support for Freescale's MX2 based i.MX27 processor. @@ -102,4 +104,11 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. +config MACH_MXT_TD60 + bool "Maxtrack i-MXT TD60" + depends on MACH_MX27 + help + Include support for i-MXT (aka td60) platform. This + includes specific configurations for the module and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 19560f04563..52aca0aaf9b 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index eede79855f4..91901b5d56c 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_enable(&per_clk[0]); clk_enable(&gpio_clk); -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart_clk[0]); #endif diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index ff5e3329891..b010bf9ceaa 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1) _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1) - _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk) - _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "vpu", vpu_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk) @@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&emi_clk); clk_enable(&iim_clk); -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart1_clk); #endif diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 50199aff014..3d398ce09b3 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = { }; #endif +static struct resource imx_ssi_resources0[] = { + { + .start = SSI1_BASE_ADDR, + .end = SSI1_BASE_ADDR + 0x6F, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_SSI1, + .end = MXC_INT_SSI1, + .flags = IORESOURCE_IRQ, + }, { + .name = "tx0", + .start = DMA_REQ_SSI1_TX0, + .end = DMA_REQ_SSI1_TX0, + .flags = IORESOURCE_DMA, + }, { + .name = "rx0", + .start = DMA_REQ_SSI1_RX0, + .end = DMA_REQ_SSI1_RX0, + .flags = IORESOURCE_DMA, + }, { + .name = "tx1", + .start = DMA_REQ_SSI1_TX1, + .end = DMA_REQ_SSI1_TX1, + .flags = IORESOURCE_DMA, + }, { + .name = "rx1", + .start = DMA_REQ_SSI1_RX1, + .end = DMA_REQ_SSI1_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource imx_ssi_resources1[] = { + { + .start = SSI2_BASE_ADDR, + .end = SSI2_BASE_ADDR + 0x6F, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_SSI2, + .end = MXC_INT_SSI2, + .flags = IORESOURCE_IRQ, + }, { + .name = "tx0", + .start = DMA_REQ_SSI2_TX0, + .end = DMA_REQ_SSI2_TX0, + .flags = IORESOURCE_DMA, + }, { + .name = "rx0", + .start = DMA_REQ_SSI2_RX0, + .end = DMA_REQ_SSI2_RX0, + .flags = IORESOURCE_DMA, + }, { + .name = "tx1", + .start = DMA_REQ_SSI2_TX1, + .end = DMA_REQ_SSI2_TX1, + .flags = IORESOURCE_DMA, + }, { + .name = "rx1", + .start = DMA_REQ_SSI2_RX1, + .end = DMA_REQ_SSI2_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device imx_ssi_device0 = { + .name = "imx-ssi", + .id = 0, + .num_resources = ARRAY_SIZE(imx_ssi_resources0), + .resource = imx_ssi_resources0, +}; + +struct platform_device imx_ssi_device1 = { + .name = "imx-ssi", + .id = 1, + .num_resources = ARRAY_SIZE(imx_ssi_resources1), + .resource = imx_ssi_resources1, +}; + /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { { diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index d315406d672..97306aa18f1 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2; extern struct platform_device mxc_spi_device0; extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; - +extern struct platform_device imx_ssi_device0; +extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c new file mode 100644 index 00000000000..03dbbdc9895 --- /dev/null +++ b/arch/arm/mach-mx2/mxt_td60.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/gpio.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/mxc_nand.h> +#include <mach/i2c.h> +#include <linux/i2c/pca953x.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> + +#include "devices.h" + +static unsigned int mxt_td60_pins[] __initdata = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA25_PF_CLS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + PF8_AF_ATA_IORDY, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mxt_td60_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct imxi2c_platform_data mxt_td60_i2c_data = { + .bitrate = 100000, +}; + +/* PCA9557 */ +static int mxt_td60_pca9557_setup(struct i2c_client *client, + unsigned gpio_base, unsigned ngpio, + void *context) +{ + static int mxt_td60_gpio_value[] = { + -1, -1, -1, -1, -1, -1, -1, 1 + }; + int n; + + for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) { + gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp"); + if (mxt_td60_gpio_value[n] < 0) + gpio_direction_input(gpio_base + n); + else + gpio_direction_output(gpio_base + n, + mxt_td60_gpio_value[n]); + gpio_export(gpio_base + n, 0); + } + + return 0; +} + +static struct pca953x_platform_data mxt_td60_pca9557_pdata = { + .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */ + .invert = 0, /* Do not invert */ + .setup = mxt_td60_pca9557_setup, +}; + +static struct i2c_board_info mxt_td60_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9557", 0x18), + .platform_data = &mxt_td60_pca9557_pdata, + }, +}; + +static struct imxi2c_platform_data mxt_td60_i2c2_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info mxt_td60_i2c2_devices[] = { +}; + +static struct imx_fb_videomode mxt_td60_modes[] = { + { + .mode = { + .name = "Chimei LW700AT9003", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30303, + .hsync_len = 64, + .left_margin = 0x67, + .right_margin = 0x68, + .vsync_len = 16, + .upper_margin = 0x0f, + .lower_margin = 0x0f, + }, + .bpp = 16, + .pcr = 0xFA208B83, + }, +}; + +static struct imx_fb_platform_data mxt_td60_fb_data = { + .mode = mxt_td60_modes, + .num_modes = ARRAY_SIZE(mxt_td60_modes), + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); +} + +static void mxt_td60_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOF(8), data); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mxt_td60_sdhc1_init, + .exit = mxt_td60_sdhc1_exit, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static void __init mxt_td60_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), + "MXT_TD60"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); + mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); + mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); + mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); + mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); + + i2c_register_board_info(0, mxt_td60_i2c_devices, + ARRAY_SIZE(mxt_td60_i2c_devices)); + + i2c_register_board_info(1, mxt_td60_i2c2_devices, + ARRAY_SIZE(mxt_td60_i2c2_devices)); + + mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data); + mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data); + mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mxt_td60_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mxt_td60_timer = { + .init = mxt_td60_timer_init, +}; + +MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") + /* maintainer: Maxtrack Industrial */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = mxt_td60_board_init, + .timer = &mxt_td60_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c index fe5b165b88c..aea3d340d2e 100644 --- a/arch/arm/mach-mx2/pca100.c +++ b/arch/arm/mach-mx2/pca100.c @@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx27_map_io, - .init_irq = mxc_init_irq, + .init_irq = mx27_init_irq, .init_machine = pca100_init, .timer = &pca100_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 851f2458bf6..ea8ed109a7c 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -2,11 +2,13 @@ if ARCH_MX3 config ARCH_MX31 select ARCH_HAS_RNGA + select ARCH_MXC_AUDMUX_V2 bool config ARCH_MX35 bool select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 comment "MX3 platforms:" @@ -61,6 +63,7 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 + select MXC_ULPI help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. @@ -100,4 +103,12 @@ config MACH_MX35_3DS help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. + +config MACH_KZM_ARM11_01 + bool "Support KZM-ARM11-01(Kyoto Microcomputer)" + select ARCH_MX31 + help + Include support for KZM-ARM11-01. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 6b9775471be..93c7b296be6 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,12 +4,12 @@ # Object file lists. -obj-y := mm.o devices.o +obj-y := mm.o devices.o cpu.o obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o +obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o obj-$(CONFIG_MACH_PCM037) += pcm037.o obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o @@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG) += qong.o obj-$(CONFIG_MACH_PCM043) += pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 776c0ee1b3c..54aab401dbd 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -33,6 +33,9 @@ #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + /* I2C2 */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, +}; + +/* RTC over I2C*/ +#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) + +static struct i2c_board_info armadillo5x0_i2c_rtc = { + I2C_BOARD_INFO("s35390a", 0x30), +}; + +/* GPIO BUTTONS */ +static struct gpio_keys_button armadillo5x0_buttons[] = { + { + .code = KEY_ENTER, /*28*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0), + .active_low = 1, + .desc = "menu", + .wakeup = 1, + }, { + .code = KEY_BACK, /*158*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0), + .active_low = 1, + .desc = "back", + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data armadillo5x0_button_data = { + .buttons = armadillo5x0_buttons, + .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), +}; + +static struct platform_device armadillo5x0_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &armadillo5x0_button_data, + } }; /* @@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { }; static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_32BIT, + .flags = SMSC911X_USE_16BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, }; @@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = { static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, + &mxc_i2c_device1, + &armadillo5x0_button_device, }; /* @@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void) /* set NAND page size to 2k if not configured via boot mode pins */ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + + /* RTC */ + /* Get RTC IRQ and register the chip */ + if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) { + if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0) + armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO); + else + gpio_free(ARMADILLO5X0_RTC_GPIO); + } + if (armadillo5x0_i2c_rtc.irq == 0) + pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); + i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); } static void __init armadillo5x0_timer_init(void) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index c595260ec1f..7584b4c6c55 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk) DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); -DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); +/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */ DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL); @@ -381,12 +381,43 @@ DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL); DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); -DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL); +DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); +DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL); + +static int clk_dummy_enable(struct clk *clk) +{ + return 0; +} + +static void clk_dummy_disable(struct clk *clk) +{ +} + +static unsigned long get_rate_nfc(struct clk *clk) +{ + unsigned long div1; + + div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1; + + return get_rate_ahb(NULL) / div1; +} + +/* NAND Controller: It seems it can't be disabled */ +static struct clk nfc_clk = { + .id = 0, + .enable_reg = 0, + .enable_shift = 0, + .get_rate = get_rate_nfc, + .set_rate = NULL, /* set_rate_nfc, */ + .enable = clk_dummy_enable, + .disable = clk_dummy_disable +}; + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -397,7 +428,6 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) - _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK(NULL, "can", can1_clk) _REGISTER_CLOCK(NULL, "can", can2_clk) _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) @@ -434,8 +464,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sdma", sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) - _REGISTER_CLOCK(NULL, "ssi", ssi1_clk) - _REGISTER_CLOCK(NULL, "ssi", ssi2_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) @@ -443,12 +473,14 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) - _REGISTER_CLOCK(NULL, "admux", admux_clk) + _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) }; int __init mx35_clocks_init() @@ -456,7 +488,7 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) ll = (3 << 16); #endif diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index b2a3bcf8266..27a318af0d2 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk) _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) - _REGISTER_CLOCK(NULL, "ssi", ssi1_clk) - _REGISTER_CLOCK(NULL, "ssi", ssi2_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK(NULL, "firi", firi_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) @@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref) clk_enable(&serial_pll_clk); + mx31_read_cpu_rev(); + if (mx31_revision() >= CHIP_REV_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c new file mode 100644 index 00000000000..db828809c67 --- /dev/null +++ b/arch/arm/mach-mx3/cpu.c @@ -0,0 +1,57 @@ +/* + * MX3 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/iim.h> + +unsigned int mx31_cpu_rev; +EXPORT_SYMBOL(mx31_cpu_rev); + +struct mx3_cpu_type { + u8 srev; + const char *name; + const char *v; + unsigned int rev; +}; + +static struct mx3_cpu_type mx31_cpu_type[] __initdata = { + { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 }, + { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 }, + { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 }, + { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 }, + { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 }, +}; + +void __init mx31_read_cpu_rev(void) +{ + u32 i, srev; + + /* read SREV register from IIM module */ + srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV); + + for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) + if (srev == mx31_cpu_type[i].srev) { + printk(KERN_INFO + "CPU identified as %s, silicon rev %s\n", + mx31_cpu_type[i].name, mx31_cpu_type[i].v); + + mx31_cpu_rev = mx31_cpu_type[i].rev; + return; + } + + printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); +} diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index e6abe181b96..6adb586515e 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = { }; #endif +static struct resource imx_ssi_resources0[] = { + { + .start = SSI1_BASE_ADDR, + .end = SSI1_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX31_INT_SSI1, + .end = MX31_INT_SSI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource imx_ssi_resources1[] = { + { + .start = SSI2_BASE_ADDR, + .end = SSI2_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM + }, { + .start = MX31_INT_SSI2, + .end = MX31_INT_SSI2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_ssi_device0 = { + .name = "imx-ssi", + .id = 0, + .num_resources = ARRAY_SIZE(imx_ssi_resources0), + .resource = imx_ssi_resources0, +}; + +struct platform_device imx_ssi_device1 = { + .name = "imx-ssi", + .id = 1, + .num_resources = ARRAY_SIZE(imx_ssi_resources1), + .resource = imx_ssi_resources1, +}; + static int mx3_devices_init(void) { if (cpu_is_mx31()) { @@ -546,7 +584,7 @@ static int mx3_devices_init(void) } if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; - mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff; + mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff; otg_resources[0].start = MX35_OTG_BASE_ADDR; otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; otg_resources[1].start = MXC_INT_USBOTG; @@ -555,6 +593,10 @@ static int mx3_devices_init(void) mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; mxc_usbh1_resources[1].start = MXC_INT_USBHS; mxc_usbh1_resources[1].end = MXC_INT_USBHS; + imx_ssi_resources0[1].start = MX35_INT_SSI1; + imx_ssi_resources0[1].end = MX35_INT_SSI1; + imx_ssi_resources1[1].start = MX35_INT_SSI2; + imx_ssi_resources1[1].end = MX35_INT_SSI2; } return 0; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index ab87419dc9a..42cf175eac6 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device; extern struct platform_device mxc_spi_device0; extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; +extern struct platform_device imx_ssi_device0; +extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c new file mode 100644 index 00000000000..6fa99ce3008 --- /dev/null +++ b/arch/arm/mach-mx3/kzmarm11.c @@ -0,0 +1,268 @@ +/* + * KZM-ARM11-01 support + * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * based on code for MX31ADS, + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/smsc911x.h> +#include <linux/types.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/board-kzmarm11.h> +#include <mach/clock.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/memory.h> + +#include "devices.h" + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +/* + * KZM-ARM11-01 has an external UART on FPGA + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = IO_ADDRESS(KZM_ARM11_16550), + .mapbase = KZM_ARM11_16550, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .irqflags = IRQ_TYPE_EDGE_RISING, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_BUGGY_UART, + }, + {}, +}; + +static struct resource serial8250_resources[] = { + { + .start = KZM_ARM11_16550, + .end = KZM_ARM11_16550 + 0x10, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(serial8250_resources), + .resource = serial8250_resources, +}; + +static int __init kzm_init_ext_uart(void) +{ + u8 tmp; + + /* + * GPIO 1-1: external UART interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* + * Unmask UART interrupt + */ + tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1)); + tmp |= 0x2; + __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1)); + + return platform_device_register(&serial_device); +} +#else +static inline int kzm_init_ext_uart(void) +{ + return 0; +} +#endif + +/* + * SMSC LAN9118 + */ +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct smsc911x_platform_config kzm_smsc9118_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, +}; + +static struct resource kzm_smsc9118_resources[] = { + { + .start = CS5_BASE_ADDR, + .end = CS5_BASE_ADDR + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device kzm_smsc9118_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), + .resource = kzm_smsc9118_resources, + .dev = { + .platform_data = &kzm_smsc9118_config, + }, +}; + +static int __init kzm_init_smsc9118(void) +{ + /* + * GPIO 1-2: SMSC9118 interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + + return platform_device_register(&kzm_smsc9118_device); +} +#else +static inline int kzm_init_smsc9118(void) +{ + return 0; +} +#endif + +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static void __init kzm_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); +} +#else +static inline void kzm_init_imx_uart(void) +{ +} +#endif + +static int kzm_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_DCD_DCE1__DCD_DCE1, + MX31_PIN_RI_DCE1__RI_DCE1, + MX31_PIN_DSR_DCE1__DSR_DCE1, + MX31_PIN_DTR_DCE1__DTR_DCE1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_DCD_DTE1__DCD_DTE2, + MX31_PIN_RI_DTE1__RI_DTE2, + MX31_PIN_DSR_DTE1__DSR_DTE2, + MX31_PIN_DTR_DTE1__DTR_DTE2, +}; + +/* + * Board specific initialization. + */ +static void __init kzm_board_init(void) +{ + mxc_iomux_setup_multiple_pins(kzm_pins, + ARRAY_SIZE(kzm_pins), "kzm"); + kzm_init_ext_uart(); + kzm_init_smsc9118(); + kzm_init_imx_uart(); + + pr_info("Clock input source is 26MHz\n"); +} + +/* + * This structure defines static mappings for the kzm-arm11-01 board. + */ +static struct map_desc kzm_io_desc[] __initdata = { + { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE, + .type = MT_DEVICE + }, + { + .virtual = CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS5_BASE_ADDR), + .length = CS5_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init kzm_map_io(void) +{ + mx31_map_io(); + iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); +} + +static void __init kzm_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer kzm_timer = { + .init = kzm_timer_init, +}; + +/* + * The following uses standard kernel macros define in arch.h in order to + * initialize __mach_desc_KZM_ARM11_01 data structure. + */ +MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = kzm_map_io, + .init_irq = mx31_init_irq, + .init_machine = kzm_board_init, + .timer = &kzm_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c index 3b3a78f49c2..7aebd74a12e 100644 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev) static int gpio_det, gpio_wp; +#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + static int mxc_mmc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { @@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev, gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); + ret = gpio_request(gpio_det, "MMC detect"); if (ret) return ret; diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c index 423025150f6..9ce029f554b 100644 --- a/arch/arm/mach-mx3/mx31lilly.c +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -31,6 +31,8 @@ #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/mfd/mc13783.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +43,7 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> +#include <mach/spi.h> #include "devices.h" @@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = { static struct platform_device *devices[] __initdata = { &smsc91x_device, &physmap_flash_device, - &mxc_i2c_device1, +}; + +/* SPI */ + +static int spi_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(1), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master spi0_pdata = { + .chipselect = spi_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), +}; + +static struct spi_imx_master spi1_pdata = { + .chipselect = spi_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), +}; + +static struct mc13783_platform_data mc13783_pdata __initdata = { + .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN, +}; + +static struct spi_board_info mc13783_dev __initdata = { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &mc13783_pdata, }; static int mx31lilly_baseboard; @@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void) } mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA"); + + /* SPI */ + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2"); + + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); + + mxc_register_device(&mxc_spi_device0, &spi0_pdata); + mxc_register_device(&mxc_spi_device1, &spi1_pdata); + spi_register_board_info(&mc13783_dev, 1); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c new file mode 100644 index 00000000000..694611d6b05 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -0,0 +1,198 @@ +/* + * LogicPD i.MX31 SOM-LV development board support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lite.h> +#include <mach/mmc.h> +#include <mach/spi.h> + +#include "devices.h" + +/* + * This file contains board-specific initialization routines for the + * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'. + * If you design an own baseboard for the module, use this file as base + * for support code. + */ + +static unsigned int litekit_db_board_pins[] __initdata = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* SPI 0 */ + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, +}; + +/* UART */ +static struct imxuart_platform_data uart_pdata __initdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* MMC */ + +static int gpio_det, gpio_wp; + +#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); +} + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); + + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); +} + +static struct imxmmc_platform_data mmc_pdata = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* SPI */ + +static int spi_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(1), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master spi0_pdata = { + .chipselect = spi_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), +}; + +/* GPIO LEDs */ + +static struct gpio_led litekit_leds[] = { + { + .name = "GPIO0", + .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "GPIO1", + .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE), + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + } +}; + +static struct gpio_led_platform_data litekit_led_platform_data = { + .leds = litekit_leds, + .num_leds = ARRAY_SIZE(litekit_leds), +}; + +static struct platform_device litekit_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &litekit_led_platform_data, + }, +}; + +void __init mx31lite_db_init(void) +{ + mxc_iomux_setup_multiple_pins(litekit_db_board_pins, + ARRAY_SIZE(litekit_db_board_pins), + "development board pins"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + mxc_register_device(&mxc_spi_device0, &spi0_pdata); + platform_device_register(&litekit_led_device); +} + diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index a8d57decdfd..def6b673659 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -2,6 +2,7 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,38 +26,47 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/mtd/physmap.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/common.h> #include <asm/page.h> #include <asm/setup.h> + +#include <mach/hardware.h> +#include <mach/common.h> #include <mach/board-mx31lite.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/irqs.h> #include <mach/mxc_nand.h> +#include <mach/spi.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> + #include "devices.h" /* - * This file contains the board-specific initialization routines. + * This file contains the module-specific initialization routines. */ static unsigned int mx31lite_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, /* LAN9117 IRQ pin */ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS1__SS1, + MX31_PIN_CSPI2_SS2__SS2, }; static struct mxc_nand_platform_data mx31lite_nand_board_info = { @@ -93,6 +103,111 @@ static struct platform_device smsc911x_device = { }; /* + * SPI + * + * The MC13783 is the only hard-wired SPI device on the module. + */ + +static int spi_internal_chipselect[] = { + MXC_SPI_CS(0), +}; + +static struct spi_imx_master spi1_pdata = { + .chipselect = spi_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), +}; + +static struct mc13783_platform_data mc13783_pdata __initdata = { + .flags = MC13783_USE_RTC | + MC13783_USE_REGULATOR, +}; + +static struct spi_board_info mc13783_spi_dev __initdata = { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), +}; + +/* + * USB + */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbh2_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_USBH2_CLK__USBH2_CLK, + MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, + MX31_PIN_USBH2_STP__USBH2_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), + "USBH2_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); + + return 0; +} + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +/* + * NOR flash + */ + +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + + + +/* * This structure defines the MX31 memory map. */ static struct map_desc mx31lite_io_desc[] __initdata = { @@ -118,19 +233,40 @@ void __init mx31lite_map_io(void) iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); } -/* - * Board specific initialization. - */ +static int mx31lite_baseboard; +core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); + static void __init mxc_board_init(void) { int ret; + switch (mx31lite_baseboard) { + case MX31LITE_NOBOARD: + break; + case MX31LITE_DB: + mx31lite_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n", + mx31lite_baseboard); + } + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), "mx31lite"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + /* NOR and NAND flash */ + platform_device_register(&physmap_flash_device); mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + mxc_register_device(&mxc_spi_device1, &spi1_pdata); + spi_register_board_info(&mc13783_spi_dev, 1); + + /* USB */ + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); + /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) @@ -150,12 +286,7 @@ struct sys_timer mx31lite_timer = { .init = mx31lite_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31LITE data structure. - */ - -MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") +MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 5592cdb8d0a..8fc624f141c 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -22,11 +22,15 @@ #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/usb/otg.h> + #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/hardware.h> #include <mach/mmc.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" @@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = { MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB H1 */ + MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, + MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, }; static struct imxuart_platform_data uart_pdata = { @@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = devboard_sdhc2_exit, }; +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int devboard_usbh1_hw_init(struct platform_device *pdev) +{ + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); + + return 0; +} + +#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) +#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) + +static int devboard_isp1105_init(struct otg_transceiver *otg) +{ + int ret = gpio_request(USBH1_MODE, "usbh1-mode"); + if (ret) + return ret; + /* single ended */ + gpio_direction_output(USBH1_MODE, 0); + + ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); + if (ret) { + gpio_free(USBH1_MODE); + return ret; + } + gpio_direction_output(USBH1_VBUSEN_B, 1); + + return 0; +} + + +static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) +{ + if (on) + gpio_set_value(USBH1_VBUSEN_B, 0); + else + gpio_set_value(USBH1_VBUSEN_B, 1); + + return 0; +} + +static struct mxc_usbh_platform_data usbh1_pdata = { + .init = devboard_usbh1_hw_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, +}; + +static int __init devboard_usbh1_init(void) +{ + struct otg_transceiver *otg; + + otg = kzalloc(sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + otg->label = "ISP1105"; + otg->init = devboard_isp1105_init; + otg->set_vbus = devboard_isp1105_set_vbus; + + usbh1_pdata.otg = otg; + + return mxc_register_device(&mx31_usbh1, &usbh1_pdata); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void) mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 2bfaffb344f..85184a35e67 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -16,17 +16,26 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/usb/otg.h> + #include <mach/common.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/mmc.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> + +#include <media/soc_camera.h> #include "devices.h" @@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = { MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, /* CSI */ - MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, @@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = { MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5, MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, MX31_PIN_TXD2__GPIO1_28, /* dsPIC resets */ MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, + /*battery detection */ + MX31_PIN_LCS0__GPIO3_23, + /* USB H1 */ + MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, + MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, }; #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) @@ -120,6 +137,166 @@ static void dspics_resets_init(void) } } +static struct spi_board_info marxbot_spi_board_info[] __initdata = { + { + .modalias = "spidev", + .max_speed_hz = 300000, + .bus_num = 1, + .chip_select = 1, /* according spi1_cs[] ! */ + }, +}; + +#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5) +#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) +#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4) +#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2) + +static int marxbot_basecam_power(struct device *dev, int on) +{ + gpio_set_value(BASECAM_POWER, !on); + return 0; +} + +static int marxbot_basecam_reset(struct device *dev) +{ + gpio_set_value(BASECAM_RST_B, 0); + udelay(100); + gpio_set_value(BASECAM_RST_B, 1); + return 0; +} + +static struct i2c_board_info marxbot_i2c_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link base_iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = marxbot_basecam_power, + .reset = marxbot_basecam_reset, + .board_info = &marxbot_i2c_devices[0], + .i2c_adapter_id = 0, + .module_name = "mt9t031", +}; + +static struct platform_device marxbot_camera[] = { + { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &base_iclink, + }, + }, +}; + +static struct platform_device *marxbot_cameras[] __initdata = { + &marxbot_camera[0], +}; + +static int __init marxbot_cam_init(void) +{ + int ret = gpio_request(CAM_CHOICE, "cam-choice"); + if (ret) + return ret; + gpio_direction_output(CAM_CHOICE, 1); + + ret = gpio_request(BASECAM_RST_B, "basecam-reset"); + if (ret) + return ret; + gpio_direction_output(BASECAM_RST_B, 1); + ret = gpio_request(BASECAM_POWER, "basecam-standby"); + if (ret) + return ret; + gpio_direction_output(BASECAM_POWER, 0); + + ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset"); + if (ret) + return ret; + gpio_direction_output(TURRETCAM_RST_B, 1); + ret = gpio_request(TURRETCAM_POWER, "turretcam-standby"); + if (ret) + return ret; + gpio_direction_output(TURRETCAM_POWER, 0); + + return 0; +} + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int marxbot_usbh1_hw_init(struct platform_device *pdev) +{ + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); + + return 0; +} + +#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) +#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) + +static int marxbot_isp1105_init(struct otg_transceiver *otg) +{ + int ret = gpio_request(USBH1_MODE, "usbh1-mode"); + if (ret) + return ret; + /* single ended */ + gpio_direction_output(USBH1_MODE, 0); + + ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); + if (ret) { + gpio_free(USBH1_MODE); + return ret; + } + gpio_direction_output(USBH1_VBUSEN_B, 1); + + return 0; +} + + +static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) +{ + if (on) + gpio_set_value(USBH1_VBUSEN_B, 0); + else + gpio_set_value(USBH1_VBUSEN_B, 1); + + return 0; +} + +static struct mxc_usbh_platform_data usbh1_pdata = { + .init = marxbot_usbh1_hw_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, +}; + +static int __init marxbot_usbh1_init(void) +{ + struct otg_transceiver *otg; + + otg = kzalloc(sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + otg->label = "ISP1105"; + otg->init = marxbot_isp1105_init; + otg->set_vbus = marxbot_isp1105_set_vbus; + + usbh1_pdata.otg = otg; + + return mxc_register_device(&mx31_usbh1, &usbh1_pdata); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void) dspics_resets_init(); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + spi_register_board_info(marxbot_spi_board_info, + ARRAY_SIZE(marxbot_spi_board_info)); + + marxbot_cam_init(); + platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras)); + + /* battery present pin */ + gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); + gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); + + marxbot_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 9243de54041..b7052914593 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -17,6 +17,7 @@ */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/fsl_devices.h> #include <linux/gpio.h> #include <linux/init.h> @@ -26,8 +27,14 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> #include <linux/types.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -37,16 +44,20 @@ #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/ipu.h> #include <mach/i2c.h> #include <mach/mmc.h> -#include <mach/mx31.h> +#include <mach/mxc_ehci.h> +#include <mach/mx3_camera.h> +#include <mach/spi.h> +#include <mach/ulpi.h> #include "devices.h" static unsigned int moboard_pins[] = { /* UART0 */ - MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS1__GPIO2_7, /* UART4 */ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, @@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = { MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, MX31_PIN_USB_OC__GPIO1_30, + /* USB H2 */ + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3, + MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5, + MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7, + MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP, + MX31_PIN_SCK6__GPIO1_25, /* LEDs */ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, /* SEL */ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, + /* SPI1 */ + MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2, + /* Atlas IRQ */ + MX31_PIN_GPIO1_3__GPIO1_3, + /* SPI2 */ + MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO, + MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS1__CSPI3_SS1, }; static struct physmap_flash_data mx31moboard_flash_data = { @@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = { .num_resources = 1, }; -static struct imxuart_platform_data uart_pdata = { +static int moboard_uart0_init(struct platform_device *pdev) +{ + gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); + return 0; +} + +static struct imxuart_platform_data uart0_pdata = { + .init = moboard_uart0_init, +}; + +static struct imxuart_platform_data uart4_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { .bitrate = 100000, }; +static int moboard_spi1_cs[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master moboard_spi1_master = { + .chipselect = moboard_spi1_cs, + .num_chipselect = ARRAY_SIZE(moboard_spi1_cs), +}; + +static struct regulator_consumer_supply sdhc_consumers[] = { + { + .dev = &mxcsdhc_device0.dev, + .supply = "sdhc0_vcc", + }, + { + .dev = &mxcsdhc_device1.dev, + .supply = "sdhc1_vcc", + }, +}; + +static struct regulator_init_data sdhc_vreg_data = { + .constraints = { + .min_uV = 2700000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers), + .consumer_supplies = sdhc_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev = &mx3_camera.dev, + .supply = "cam_vcc", + }, +}; + +static struct regulator_init_data cam_vreg_data = { + .constraints = { + .min_uV = 2700000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +static struct mc13783_regulator_init_data moboard_regulators[] = { + { + .id = MC13783_REGU_VMMC1, + .init_data = &sdhc_vreg_data, + }, + { + .id = MC13783_REGU_VCAM, + .init_data = &cam_vreg_data, + }, +}; + +static struct mc13783_platform_data moboard_pmic = { + .regulators = moboard_regulators, + .num_regulators = ARRAY_SIZE(moboard_regulators), + .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | + MC13783_USE_ADC, +}; + +static struct spi_board_info moboard_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + .max_speed_hz = 300000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &moboard_pmic, + .mode = SPI_CS_HIGH, + }, +}; + +static int moboard_spi2_cs[] = { + MXC_SPI_CS(1), +}; + +static struct spi_imx_master moboard_spi2_master = { + .chipselect = moboard_spi2_cs, + .num_chipselect = ARRAY_SIZE(moboard_spi2_cs), +}; + #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) @@ -208,6 +346,56 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) + +static int moboard_usbh2_hw_init(struct platform_device *pdev) +{ + int ret = gpio_request(USBH2_EN_B, "usbh2-en"); + if (ret) + return ret; + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + gpio_direction_output(USBH2_EN_B, 0); + + return 0; +} + +static int moboard_usbh2_hw_exit(struct platform_device *pdev) +{ + gpio_free(USBH2_EN_B); + return 0; +} + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = moboard_usbh2_hw_init, + .exit = moboard_usbh2_hw_exit, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static int __init moboard_usbh2_init(void) +{ + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + return mxc_register_device(&mx31_usbh2, &usbh2_pdata); +} + + static struct gpio_led mx31moboard_leds[] = { { .name = "coreboard-led-0:red:running", @@ -266,11 +454,48 @@ static void mx31moboard_init_sel_gpios(void) } } +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + static struct platform_device *devices[] __initdata = { &mx31moboard_flash, &mx31moboard_leds_device, }; +static struct mx3_camera_pdata camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 4800, +}; + +#define CAMERA_BUF_SIZE (4*1024*1024) + +static int __init mx31moboard_cam_alloc_dma(const size_t buf_size) +{ + dma_addr_t dma_handle; + void *buf; + int dma; + + if (buf_size < 2 * 1024 * 1024) + return -EINVAL; + + buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_err("%s: cannot allocate camera buffer-memory\n", __func__); + return -ENOMEM; + } + + memset(buf, 0, buf_size); + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma_handle, dma_handle, buf_size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + /* The way we call dma_declare_coherent_memory only a malloc can fail */ + return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; +} + static int mx31moboard_baseboard; core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); @@ -284,20 +509,34 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device4, &uart_pdata); + mxc_register_device(&mxc_uart_device0, &uart0_pdata); + + mxc_register_device(&mxc_uart_device4, &uart4_pdata); mx31moboard_init_sel_gpios(); mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + mxc_register_device(&mxc_spi_device1, &moboard_spi1_master); + mxc_register_device(&mxc_spi_device2, &moboard_spi2_master); + + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(moboard_spi_board_info, + ARRAY_SIZE(moboard_spi_board_info)); + mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE)) + mxc_register_device(&mx3_camera, &camera_pdata); + usb_xcvr_reset(); moboard_usbotg_init(); mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + moboard_usbh2_init(); switch (mx31moboard_baseboard) { case MX31NOBOARD: diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c index 6ff186e46ce..0bbc65ea23c 100644 --- a/arch/arm/mach-mx3/mx35pdk.c +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/memory.h> #include <linux/gpio.h> +#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = { MX35_PAD_FEC_TDATA2__FEC_TDATA_2, MX35_PAD_FEC_RDATA3__FEC_RDATA_3, MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, +}; + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; /* @@ -81,6 +91,8 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init mx35pdk_timer_init(void) diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c index e18a224671f..e3aa829be58 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/pcm043.c @@ -43,6 +43,7 @@ #include <mach/iomux-mx35.h> #include <mach/ipu.h> #include <mach/mx3fb.h> +#include <mach/mxc_nand.h> #include "devices.h" @@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = { MX35_PAD_ATA_CS0__GPIO2_6, }; +static struct mxc_nand_platform_data pcm037_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + /* * Board specific initialization. */ @@ -216,6 +222,7 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxc_uart_device1, &uart_pdata); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a6f8eab14ba..d89c6adbe8b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,34 +2,105 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -if PXA3xx +comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" -menu "Supported PXA3xx Processor Variants" +config ARCH_LUBBOCK + bool "Intel DBPXA250 Development Platform (aka Lubbock)" + select PXA25x + select SA1111 + select PXA_HAVE_BOARD_IRQS -config CPU_PXA300 - bool "PXA300 (codename Monahans-L)" +config MACH_MAINSTONE + bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS -config CPU_PXA310 - bool "PXA310 (codename Monahans-LV)" +config MACH_ZYLONITE + bool + select PXA3xx + select PXA_SSP + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + +config MACH_ZYLONITE300 + bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" select CPU_PXA300 + select CPU_PXA310 + select MACH_ZYLONITE -config CPU_PXA320 - bool "PXA320 (codename Monahans-P)" +config MACH_ZYLONITE320 + bool "PXA3xx Development Platform (aka Zylonite) PXA320" + select CPU_PXA320 + select MACH_ZYLONITE -config CPU_PXA930 - bool "PXA930 (codename Tavor-P)" +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select PXA3xx + select PXA_SSP -config CPU_PXA935 - bool "PXA935 (codename Tavor-P65)" +config MACH_TAVOREVB + bool "PXA930 Evaluation Board (aka TavorEVB)" + select PXA3xx select CPU_PXA930 -config CPU_PXA950 - bool "PXA950 (codename Tavor-PV2)" +config MACH_SAAR + bool "PXA930 Handheld Platform (aka SAAR)" + select PXA3xx select CPU_PXA930 -endmenu +comment "Third Party Dev Platforms (sorted by vendor name)" -endif +config ARCH_PXA_IDP + bool "Accelent Xscale IDP" + select PXA25x + +config ARCH_VIPER + bool "Arcom/Eurotech VIPER SBC" + select PXA25x + select ISA + select I2C_GPIO + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + select PXA_HAVE_ISA_IRQS + +config MACH_BALLOON3 + bool "Balloon 3 board" + select PXA27x + select IWMMXT + select PXA_HAVE_BOARD_IRQS + +config MACH_CSB726 + bool "Enable Cogent CSB726 System On a Module" + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Cogent + CSB726 System On Module. + +config CSB726_CSB701 + bool "Enable support for CSB701 baseboard" + depends on MACH_CSB726 + +config MACH_ARMCORE + bool "CompuLab CM-X255/CM-X270 modules" + select PXA27x + select IWMMXT + select PXA25x + select PXA_SSP + +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" + select PXA27x + +config MACH_EXEDA + bool "CompuLab eXeda platform" + select PXA27x + +config MACH_CM_X300 + bool "CompuLab CM-X300 modules" + select PXA3xx + select CPU_PXA300 config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -62,185 +133,24 @@ config MACH_STARGATE2 select IWMMXT select PXA_HAVE_BOARD_IRQS -config ARCH_LUBBOCK - bool "Intel DBPXA250 Development Platform" - select PXA25x - select SA1111 - select PXA_HAVE_BOARD_IRQS - -config MACH_LOGICPD_PXA270 - bool "LogicPD PXA270 Card Engine Development Platform" - select PXA27x - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - -config MACH_MAINSTONE - bool "Intel HCDDBBVA0 Development Platform" - select PXA27x - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - -config MACH_MP900C - bool "Nec Mobilepro 900/c" - select PXA25x - -config MACH_BALLOON3 - bool "Balloon 3 board" - select PXA27x - select IWMMXT - select PXA_HAVE_BOARD_IRQS - -config ARCH_PXA_IDP - bool "Accelent Xscale IDP" - select PXA25x - -config PXA_SHARPSL - bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" - select SHARP_SCOOP - select SHARP_PARAM - help - Say Y here if you intend to run this kernel on a - Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), - SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) - handheld computer. - -config SHARPSL_PM - bool - select APM_EMULATION - -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. - -config MACH_POODLE - bool "Enable Sharp SL-5600 (Poodle) Support" - depends on PXA_SHARPSL +config MACH_XCEP + bool "Iskratel Electronics XCEP" select PXA25x - select SHARP_LOCOMO + select MTD + select MTD_PARTITIONS + select MTD_PHYSMAP + select MTD_CFI_INTELEXT + select MTD_CFI + select MTD_CHAR + select SMC91X select PXA_SSP - -config MACH_CORGI - bool "Enable Sharp SL-C700 (Corgi) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_SHEPHERD - bool "Enable Sharp SL-C750 (Shepherd) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_HUSKY - bool "Enable Sharp SL-C760 (Husky) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_AKITA - bool "Enable Sharp SL-1000 (Akita) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ - select I2C - select I2C_PXA - -config MACH_SPITZ - bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - -config MACH_BORZOI - bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - -config MACH_TOSA - bool "Enable Sharp SL-6000x (Tosa) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_HAVE_BOARD_IRQS - -config ARCH_VIPER - bool "Arcom/Eurotech VIPER SBC" - select PXA25x - select ISA - select I2C_GPIO - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - select PXA_HAVE_ISA_IRQS - -config ARCH_PXA_ESERIES - bool "PXA based Toshiba e-series PDAs" - select PXA25x - select PXA_HAVE_BOARD_IRQS - -config MACH_E330 - bool "Toshiba e330" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e330 family PDA. - -config MACH_E350 - bool "Toshiba e350" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e350 family PDA. - -config MACH_E740 - bool "Toshiba e740" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 - help - Say Y here if you intend to run this kernel on a Toshiba - e740 family PDA. - -config MACH_E750 - bool "Toshiba e750" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 - help - Say Y here if you intend to run this kernel on a Toshiba - e750 family PDA. - -config MACH_E400 - bool "Toshiba e400" - default y - depends on ARCH_PXA_ESERIES help - Say Y here if you intend to run this kernel on a Toshiba - e400 family PDA. - -config MACH_E800 - bool "Toshiba e800" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 - help - Say Y here if you intend to run this kernel on a Toshiba - e800 family PDA. + PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. + Tuned for usage in Libera instruments for particle accelerators. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" -config MACH_H5000 - bool "HP iPAQ h5000" - select PXA25x - config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA @@ -274,13 +184,38 @@ config TRIZEPS_PCMCIA help Enable PCMCIA support for Trizeps modules -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS -config MACH_EXEDA - bool "CompuLab eXeda platform" +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x + select IWMMXT + select PXA_SSP + select PXA_HAVE_BOARD_IRQS + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + select HAVE_PWM + depends on MACH_PCM027 + +choice + prompt "display on pcm990" + depends on MACH_PCM990_BASEBOARD + +config PCM990_DISPLAY_SHARP + bool "sharp lq084v1dg21 stn display" + +config PCM990_DISPLAY_NEC + bool "nec nl6448bc20_18d tft display" + +config PCM990_DISPLAY_NONE + bool "no display" + +endchoice config MACH_COLIBRI bool "Toradex Colibri PXA270" @@ -290,45 +225,15 @@ config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" select PXA3xx select CPU_PXA320 -config MACH_ZYLONITE - bool "PXA3xx Development Platform (aka Zylonite)" - select PXA3xx - select PXA_SSP - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - -config MACH_LITTLETON - bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx - select PXA_SSP - -config MACH_TAVOREVB - bool "PXA930 Evaluation Board (aka TavorEVB)" - select PXA3xx - select CPU_PXA930 - -config MACH_SAAR - bool "PXA930 Handheld Platform (aka SAAR)" - select PXA3xx - select CPU_PXA930 - -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select PXA27x - select IWMMXT - select PXA25x - select PXA_SSP - -config MACH_CM_X300 - bool "CompuLab CM-X300 modules" - select PXA3xx - select CPU_PXA300 +comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" @@ -338,6 +243,15 @@ config MACH_H4700 select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_H5000 + bool "HP iPAQ h5000" + select PXA25x + +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + select FB_W100 + config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x @@ -346,11 +260,6 @@ config MACH_MAGICIAN select HAVE_PWM select PXA_HAVE_BOARD_IRQS -config MACH_HIMALAYA - bool "HTC Himalaya Support" - select CPU_PXA26x - select FB_W100 - config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x @@ -362,13 +271,47 @@ config MACH_MIOA701 MIO A701. Currently there is only basic support for this PDA. -config MACH_PCM027 - bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" +config PXA_EZX + bool "Motorola EZX Platform" select PXA27x select IWMMXT - select PXA_SSP + select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX + +config MACH_MP900C + bool "Nec Mobilepro 900/c" + select PXA25x + config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM @@ -421,109 +364,172 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. -config MACH_TREO680 - bool "Palm Treo 680" +config MACH_PALMLD + bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help - Say Y here if you intend to run this kernel on Palm Treo 680 + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + +config PALM_TREO + bool + depends on ARCH_PXA_PALM + +config MACH_CENTRO + bool "Palm Centro 685 (GSM)" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + select PALM_TREO + help + Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. -config MACH_PALMLD - bool "Palm LifeDrive" +config MACH_TREO680 + bool "Palm Treo 680" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select PALM_TREO help - Say Y here if you intend to run this kernel on a Palm LifeDrive + Say Y here if you intend to run this kernel on Palm Treo 680 + smartphone. + +config PXA_SHARPSL + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" + select SHARP_SCOOP + select SHARP_PARAM + help + Say Y here if you intend to run this kernel on a + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config MACH_PCM990_BASEBOARD - bool "PHYTEC PCM-990 development board" - select HAVE_PWM - depends on MACH_PCM027 +config SHARPSL_PM + bool + select APM_EMULATION -choice - prompt "display on pcm990" - depends on MACH_PCM990_BASEBOARD +config CORGI_SSP_DEPRECATED + bool + select PXA_SSP + help + This option will include corgi_ssp.c and corgi_lcd.c + that corgi_ts.c and other legacy drivers (corgi_bl.c + and sharpsl_pm.c) may depend on. -config PCM990_DISPLAY_SHARP - bool "sharp lq084v1dg21 stn display" +config MACH_POODLE + bool "Enable Sharp SL-5600 (Poodle) Support" + depends on PXA_SHARPSL + select PXA25x + select SHARP_LOCOMO + select PXA_SSP -config PCM990_DISPLAY_NEC - bool "nec nl6448bc20_18d tft display" +config MACH_CORGI + bool "Enable Sharp SL-C700 (Corgi) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -config PCM990_DISPLAY_NONE - bool "no display" +config MACH_SHEPHERD + bool "Enable Sharp SL-C750 (Shepherd) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -endchoice +config MACH_HUSKY + bool "Enable Sharp SL-C760 (Husky) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -config MACH_CSB726 - bool "Enable Cogent CSB726 System On a Module" +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends on PXA_SHARPSL select PXA27x - select IWMMXT - help - Say Y here if you intend to run this kernel on a Cogent - CSB726 System On Module. + select PXA_SHARP_Cxx00 + select MACH_SPITZ + select I2C + select I2C_PXA -config CSB726_CSB701 - bool "Enable supprot for CSB701 baseboard" - depends on MACH_CSB726 +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 -config PXA_EZX - bool "Motorola EZX Platform" +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends on PXA_SHARPSL select PXA27x - select IWMMXT - select HAVE_PWM + select PXA_SHARP_Cxx00 + +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends on PXA_SHARPSL + select PXA25x select PXA_HAVE_BOARD_IRQS -config MACH_EZX_A780 - bool "Motorola EZX A780" - default y - depends on PXA_EZX +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select PXA25x + select PXA_HAVE_BOARD_IRQS -config MACH_EZX_E680 - bool "Motorola EZX E680" +config MACH_E330 + bool "Toshiba e330" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. -config MACH_EZX_A1200 - bool "Motorola EZX A1200" +config MACH_E350 + bool "Toshiba e350" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e350 family PDA. -config MACH_EZX_A910 - bool "Motorola EZX A910" +config MACH_E740 + bool "Toshiba e740" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. -config MACH_EZX_E6 - bool "Motorola EZX E6" +config MACH_E750 + bool "Toshiba e750" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. -config MACH_EZX_E2 - bool "Motorola EZX E2" +config MACH_E400 + bool "Toshiba e400" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. -config MACH_XCEP - bool "Iskratel Electronics XCEP" - select PXA25x - select MTD - select MTD_PARTITIONS - select MTD_PHYSMAP - select MTD_CFI_INTELEXT - select MTD_CFI - select MTD_CHAR - select SMC91X - select PXA_SSP +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + select FB_W100 help - PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. - Tuned for usage in Libera instruments for particle accelerators. + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. endmenu @@ -551,6 +557,42 @@ config PXA3xx help Select code specific to PXA3xx variants +config CPU_PXA300 + bool + select PXA3xx + help + PXA300 (codename Monahans-L) + +config CPU_PXA310 + bool + select CPU_PXA300 + help + PXA310 (codename Monahans-LV) + +config CPU_PXA320 + bool + select PXA3xx + help + PXA320 (codename Monahans-P) + +config CPU_PXA930 + bool + select PXA3xx + help + PXA930 (codename Tavor-P) + +config CPU_PXA935 + bool + select CPU_PXA930 + help + PXA935 (codename Tavor-P65) + +config CPU_PXA950 + bool + select CPU_PXA930 + help + PXA950 (codename Tavor-PV2) + config PXA_SHARP_C7xx bool select PXA_SSP diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f10e152bfc2..b5d29e60a34 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o -# Specific board support -obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o -obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o -obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o +# NOTE: keep the order of boards in accordance to their order in Kconfig + +# Intel/Marvell Dev Platforms obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o -obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o -obj-$(CONFIG_MACH_BALLOON3) += balloon3.o -obj-$(CONFIG_MACH_MP900C) += mp900.o +obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o +obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o +obj-$(CONFIG_MACH_LITTLETON) += littleton.o +obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o +obj-$(CONFIG_MACH_SAAR) += saar.o + +# 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o +obj-$(CONFIG_ARCH_VIPER) += viper.o +obj-$(CONFIG_MACH_BALLOON3) += balloon3.o +obj-$(CONFIG_MACH_CSB726) += csb726.o +obj-$(CONFIG_CSB726_CSB701) += csb701.o +obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o +ifeq ($(CONFIG_PCI),y) +obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o +endif +obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_CM_X300) += cm-x300.o +obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o +obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o +obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o +obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_STARGATE2) += stargate2.o +obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o +obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o +obj-$(CONFIG_MACH_PCM027) += pcm027.o +obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o + +# End-user Products +obj-$(CONFIG_MACH_H4700) += hx4700.o obj-$(CONFIG_MACH_H5000) += h5000.o +obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o +obj-$(CONFIG_MACH_MAGICIAN) += magician.o +obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o +obj-$(CONFIG_PXA_EZX) += ezx.o +obj-$(CONFIG_MACH_MP900C) += mp900.o +obj-$(CONFIG_MACH_PALMTE2) += palmte2.o +obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALMT5) += palmt5.o +obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMZ72) += palmz72.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o +obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o -obj-$(CONFIG_MACH_PCM027) += pcm027.o -obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o -obj-$(CONFIG_MACH_EM_X270) += em-x270.o -obj-$(CONFIG_MACH_H4700) += hx4700.o -obj-$(CONFIG_MACH_MAGICIAN) += magician.o -obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o -obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o obj-$(CONFIG_MACH_E330) += e330.o obj-$(CONFIG_MACH_E350) += e350.o @@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o -obj-$(CONFIG_MACH_PALMTE2) += palmte2.o -obj-$(CONFIG_MACH_PALMTC) += palmtc.o -obj-$(CONFIG_MACH_PALMT5) += palmt5.o -obj-$(CONFIG_MACH_PALMTX) += palmtx.o -obj-$(CONFIG_MACH_PALMLD) += palmld.o -obj-$(CONFIG_MACH_PALMZ72) += palmz72.o -obj-$(CONFIG_MACH_TREO680) += treo680.o -obj-$(CONFIG_ARCH_VIPER) += viper.o - -ifeq ($(CONFIG_MACH_ZYLONITE),y) - obj-y += zylonite.o - obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o - obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o -endif -obj-$(CONFIG_MACH_LITTLETON) += littleton.o -obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o -obj-$(CONFIG_MACH_SAAR) += saar.o - -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o -obj-$(CONFIG_MACH_CM_X300) += cm-x300.o -obj-$(CONFIG_PXA_EZX) += ezx.o - -obj-$(CONFIG_MACH_XCEP) += xcep.o - -obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o -obj-$(CONFIG_MACH_STARGATE2) += stargate2.o -obj-$(CONFIG_MACH_CSB726) += csb726.o -obj-$(CONFIG_CSB726_CSB701) += csb701.o # Support for blinky lights led-y := leds.o @@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o obj-$(CONFIG_LEDS) += $(led-y) -ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o -endif - obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index f23138b8fca..b8cd07ca938 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -306,6 +306,10 @@ static void __init balloon3_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); if (balloon3_has(BALLOON3_FEATURE_AUDIO)) pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index b50ef39eabf..bff6e78f033 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {} static void __init cmx2xx_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + cmx2xx_pm_init(); if (cpu_is_pxa25x()) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 102916f1e46..d37cfa132a6 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -3,9 +3,10 @@ * * Support for the CompuLab CM-X300 modules * - * Copyright (C) 2008 CompuLab Ltd. + * Copyright (C) 2008,2009 CompuLab Ltd. * * Mike Rapoport <mike@compulab.co.il> + * Igor Grinberg <grinberg@compulab.co.il> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,30 +17,41 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/mfd/da903x.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/tdo24m.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> #include <mach/pxa300.h> +#include <mach/pxa27x-udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <plat/i2c.h> -#include <mach/pxa3xx_nand.h> +#include <plat/pxa3xx_nand.h> +#include <mach/audio.h> #include <asm/mach/map.h> #include "generic.h" +#include "devices.h" #define CM_X300_ETH_PHYS 0x08000010 @@ -53,7 +65,7 @@ #define GPIO97_RTC_RD (97) #define GPIO98_RTC_IO (98) -static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { +static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, GPIO55_LCD_LDD_1, @@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { GPIO36_UART1_DTR, /* GPIOs */ - GPIO79_GPIO, /* LED */ GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */ GPIO85_GPIO, /* MMC WP */ GPIO99_GPIO, /* Ethernet IRQ */ @@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* PWM Backlight */ + GPIO19_PWM2_OUT, +}; + +static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = { + /* GPIOs */ + GPIO79_GPIO, /* LED */ + GPIO77_GPIO, /* WiFi reset */ + GPIO78_GPIO, /* BT reset */ +}; + +static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = { + /* GPIOs */ + GPIO76_GPIO, /* LED */ + GPIO71_GPIO, /* WiFi reset */ + GPIO70_GPIO, /* BT reset */ +}; + +static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = { + /* USB PORT 2 */ + ULPI_STP, + ULPI_NXT, + ULPI_DIR, + GPIO30_ULPI_DATA_OUT_0, + GPIO31_ULPI_DATA_OUT_1, + GPIO32_ULPI_DATA_OUT_2, + GPIO33_ULPI_DATA_OUT_3, + GPIO34_ULPI_DATA_OUT_4, + GPIO35_ULPI_DATA_OUT_5, + GPIO36_ULPI_DATA_OUT_6, + GPIO37_ULPI_DATA_OUT_7, + GPIO38_ULPI_CLK, + /* external PHY reset pin */ + GPIO127_GPIO, + + /* USB PORT 3 */ + GPIO77_USB_P3_1, + GPIO78_USB_P3_2, + GPIO79_USB_P3_3, + GPIO80_USB_P3_4, + GPIO81_USB_P3_5, + GPIO82_USB_P3_6, + GPIO0_2_USBH_PEN, }; #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) @@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void) static inline void cm_x300_init_dm9000(void) {} #endif +/* LCD */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info cm_x300_lcd_modes[] = { [0] = { - .pixclock = 38000, + .pixclock = 38250, .bpp = 16, .xres = 480, .yres = 640, .hsync_len = 8, .vsync_len = 2, .left_margin = 8, - .upper_margin = 0, + .upper_margin = 2, .right_margin = 24, .lower_margin = 4, .cmap_greyscale = 0, @@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = { static struct pxafb_mach_info cm_x300_lcd = { .modes = cm_x300_lcd_modes, - .num_modes = 2, + .num_modes = ARRAY_SIZE(cm_x300_lcd_modes), .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; @@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void) static inline void cm_x300_init_lcd(void) {} #endif +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct platform_pwm_backlight_data cm_x300_backlight_data = { + .pwm_id = 2, + .max_brightness = 100, + .dft_brightness = 100, + .pwm_period_ns = 10000, +}; + +static struct platform_device cm_x300_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &cm_x300_backlight_data, + }, +}; + +static void cm_x300_init_bl(void) +{ + platform_device_register(&cm_x300_backlight_device); +} +#else +static inline void cm_x300_init_bl(void) {} +#endif + +#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE) +#define GPIO_LCD_BASE (144) +#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */ +#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */ +#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */ +#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */ +#define LCD_SPI_BUS_NUM (1) + +static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = { + .sck = GPIO_LCD_SCL, + .mosi = GPIO_LCD_DIN, + .miso = GPIO_LCD_DOUT, + .num_chipselect = 1, +}; + +static struct platform_device cm_x300_spi_gpio = { + .name = "spi_gpio", + .id = LCD_SPI_BUS_NUM, + .dev = { + .platform_data = &cm_x300_spi_gpio_pdata, + }, +}; + +static struct tdo24m_platform_data cm_x300_tdo24m_pdata = { + .model = TDO35S, +}; + +static struct spi_board_info cm_x300_spi_devices[] __initdata = { + { + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = LCD_SPI_BUS_NUM, + .chip_select = 0, + .controller_data = (void *) GPIO_LCD_CS, + .platform_data = &cm_x300_tdo24m_pdata, + }, +}; + +static void __init cm_x300_init_spi(void) +{ + spi_register_board_info(cm_x300_spi_devices, + ARRAY_SIZE(cm_x300_spi_devices)); + platform_device_register(&cm_x300_spi_gpio); +} +#else +static inline void cm_x300_init_spi(void) {} +#endif + +#if defined(CONFIG_SND_PXA2XX_LIB_AC97) +static void __init cm_x300_init_ac97(void) +{ + pxa_set_ac97_info(NULL); +} +#else +static inline void cm_x300_init_ac97(void) {} +#endif + #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) static struct mtd_partition cm_x300_nand_partitions[] = { [0] = { @@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {} #endif #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int cm_x300_ohci_init(struct device *dev) +{ + if (cpu_is_pxa300()) + UP2OCR = UP2OCR_HXS + | UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE; + + return 0; +} + static struct pxaohci_platform_data cm_x300_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW, + .init = cm_x300_ohci_init, }; static void __init cm_x300_init_ohci(void) @@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = { [0] = { .name = "cm-x300:green", .default_trigger = "heartbeat", - .gpio = 79, .active_low = 1, }, }; @@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = { static void __init cm_x300_init_leds(void) { + if (system_rev < 130) + cm_x300_leds[0].gpio = 79; + else + cm_x300_leds[0].gpio = 76; + platform_device_register(&cm_x300_led_device); } #else @@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void) static inline void cm_x300_init_rtc(void) {} #endif -static void __init cm_x300_init(void) +/* DA9030 */ +struct da903x_subdev_info cm_x300_da9030_subdevs[] = { + { + .name = "da903x-backlight", + .id = DA9030_ID_WLED, + } +}; + +static struct da903x_platform_data cm_x300_da9030_info = { + .num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs), + .subdevs = cm_x300_da9030_subdevs, +}; + +static struct i2c_board_info cm_x300_pmic_info = { + I2C_BOARD_INFO("da9030", 0x49), + .irq = IRQ_GPIO(0), + .platform_data = &cm_x300_da9030_info, +}; + +static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = { + .use_pio = 1, +}; + +static void __init cm_x300_init_da9030(void) +{ + pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info); + i2c_register_board_info(1, &cm_x300_pmic_info, 1); +} + +static void __init cm_x300_init_wi2wi(void) +{ + int bt_reset, wlan_en; + int err; + + if (system_rev < 130) { + wlan_en = 77; + bt_reset = 78; + } else { + wlan_en = 71; + bt_reset = 70; + } + + /* Libertas and CSR reset */ + err = gpio_request(wlan_en, "wlan en"); + if (err) { + pr_err("CM-X300: failed to request wlan en gpio: %d\n", err); + } else { + gpio_direction_output(wlan_en, 1); + gpio_free(wlan_en); + } + + err = gpio_request(bt_reset, "bt reset"); + if (err) { + pr_err("CM-X300: failed to request bt reset gpio: %d\n", err); + } else { + gpio_direction_output(bt_reset, 1); + udelay(10); + gpio_set_value(bt_reset, 0); + udelay(10); + gpio_set_value(bt_reset, 1); + gpio_free(bt_reset); + } +} + +/* MFP */ +static void __init cm_x300_init_mfp(void) { /* board-processor specific GPIO initialization */ - pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg)); + pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg)); + + if (system_rev < 130) + pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg)); + else + pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg)); + + if (cpu_is_pxa310()) + pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg)); +} + +static void __init cm_x300_init(void) +{ + cm_x300_init_mfp(); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + cm_x300_init_da9030(); cm_x300_init_dm9000(); cm_x300_init_lcd(); cm_x300_init_ohci(); @@ -445,7 +679,11 @@ static void __init cm_x300_init(void) cm_x300_init_nand(); cm_x300_init_leds(); cm_x300_init_i2c(); + cm_x300_init_spi(); cm_x300_init_rtc(); + cm_x300_init_ac97(); + cm_x300_init_wi2wi(); + cm_x300_init_bl(); } static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 01bcfaae75b..061c45316de 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -130,6 +130,9 @@ static struct platform_device *colibri_pxa270_devices[] __initdata = { static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices)); } diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 37c239c5656..45c23fd6df3 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -170,6 +170,10 @@ static inline void colibri_pxa310_init_ac97(void) {} void __init colibri_pxa300_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + colibri_pxa300_init_eth(); colibri_pxa300_init_ohci(); colibri_pxa3xx_init_nand(); diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ec0e14b9668..ae835fad7d1 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -199,6 +199,10 @@ static void __init colibri_pxa320_init_uart(void) void __init colibri_pxa320_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + colibri_pxa320_init_eth(); colibri_pxa320_init_ohci(); colibri_pxa3xx_init_nand(); diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index efebaf4d734..e6c0a2287eb 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -25,7 +25,7 @@ #include <mach/colibri.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/pxa3xx_nand.h> +#include <plat/pxa3xx_nand.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index b536b5a5a10..74446cf8ae6 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -671,6 +671,10 @@ static void __init corgi_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + corgi_init_spi(); pxa_set_udc_info(&udc_info); diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index a093282fe4d..d4a0733e905 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -214,8 +214,8 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT, .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT, .bat_levels = 40, - .bat_levels_noac = spitz_battery_levels_noac, - .bat_levels_acin = spitz_battery_levels_acin, + .bat_levels_noac = sharpsl_battery_levels_noac, + .bat_levels_acin = sharpsl_battery_levels_acin, .status_high_acin = 188, .status_low_acin = 178, .status_high_noac = 185, diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 965480eb4fe..88575b87bd3 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -268,6 +268,9 @@ static void __init csb726_init(void) /* MSC2 = 0x06697ff4; *//* none/SM501 */ MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */ + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); pxa_set_i2c_info(NULL); pxa27x_set_i2c_power_info(NULL); pxa_set_mci_info(&csb726_mci); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 46fabe1cca1..3395463bb5a 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,17 +4,18 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <mach/hardware.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> -#include <plat/i2c.h> #include <mach/ohci.h> #include <mach/pxa27x_keypad.h> #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> -#include <mach/pxa3xx_nand.h> +#include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> #include "devices.h" #include "generic.h" @@ -167,13 +168,18 @@ static struct resource pxa_resource_ffuart[] = { } }; -struct platform_device pxa_device_ffuart= { +struct platform_device pxa_device_ffuart = { .name = "pxa2xx-uart", .id = 0, .resource = pxa_resource_ffuart, .num_resources = ARRAY_SIZE(pxa_resource_ffuart), }; +void __init pxa_set_ffuart_info(void *info) +{ + pxa_register_device(&pxa_device_ffuart, info); +} + static struct resource pxa_resource_btuart[] = { { .start = 0x40200000, @@ -193,6 +199,11 @@ struct platform_device pxa_device_btuart = { .num_resources = ARRAY_SIZE(pxa_resource_btuart), }; +void __init pxa_set_btuart_info(void *info) +{ + pxa_register_device(&pxa_device_btuart, info); +} + static struct resource pxa_resource_stuart[] = { { .start = 0x40700000, @@ -212,6 +223,11 @@ struct platform_device pxa_device_stuart = { .num_resources = ARRAY_SIZE(pxa_resource_stuart), }; +void __init pxa_set_stuart_info(void *info) +{ + pxa_register_device(&pxa_device_stuart, info); +} + static struct resource pxa_resource_hwuart[] = { { .start = 0x41600000, @@ -231,6 +247,14 @@ struct platform_device pxa_device_hwuart = { .num_resources = ARRAY_SIZE(pxa_resource_hwuart), }; +void __init pxa_set_hwuart_info(void *info) +{ + if (cpu_is_pxa255()) + pxa_register_device(&pxa_device_hwuart, info); + else + pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware"); +} + static struct resource pxai2c_resources[] = { { .start = 0x40301680, diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c index 74d3f8987c5..8fde3387279 100644 --- a/arch/arm/mach-pxa/e330.c +++ b/arch/arm/mach-pxa/e330.c @@ -55,6 +55,9 @@ static struct platform_device *devices[] __initdata = { static void __init e330_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c index 08003627213..f50f055f572 100644 --- a/arch/arm/mach-pxa/e350.c +++ b/arch/arm/mach-pxa/e350.c @@ -56,6 +56,9 @@ static struct platform_device *devices[] __initdata = { static void __init e350_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c index ed9c0c3f64a..55b950f1284 100644 --- a/arch/arm/mach-pxa/e400.c +++ b/arch/arm/mach-pxa/e400.c @@ -130,6 +130,9 @@ static struct platform_device *devices[] __initdata = { static void __init e400_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 49acdfa6650..94b23a9e387 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -192,6 +192,9 @@ static struct platform_device *devices[] __initdata = { static void __init e740_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); eseries_register_clks(); clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, "UDCCLK", &pxa25x_device_udc.dev), diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 4052ece3ef4..5eccbce73a3 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -194,6 +194,9 @@ static struct platform_device *devices[] __initdata = { static void __init e750_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index 9866c7b9e78..aad129bed19 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -195,6 +195,9 @@ static struct platform_device *devices[] __initdata = { static void __init e800_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index aec7f4214b1..1c0de808b54 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -967,7 +967,7 @@ static inline void em_x270_init_gpio_keys(void) {} #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) static struct regulator *em_x270_camera_ldo; -static int em_x270_sensor_init(struct device *dev) +static int em_x270_sensor_init(void) { int ret; @@ -996,7 +996,6 @@ static int em_x270_sensor_init(struct device *dev) } struct pxacamera_platform_data em_x270_camera_platform_data = { - .init = em_x270_sensor_init, .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, .mclk_10khz = 2600, @@ -1049,8 +1048,10 @@ static struct platform_device em_x270_camera = { static void __init em_x270_init_camera(void) { - pxa_set_camera_info(&em_x270_camera_platform_data); - platform_device_register(&em_x270_camera); + if (em_x270_sensor_init() == 0) { + pxa_set_camera_info(&em_x270_camera_platform_data); + platform_device_register(&em_x270_camera); + } } #else static inline void em_x270_init_camera(void) {} @@ -1286,6 +1287,10 @@ static void __init em_x270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + #ifdef CONFIG_PM pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); #endif diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 588b265e575..626c82b1397 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -17,7 +17,11 @@ #include <linux/delay.h> #include <linux/pwm_backlight.h> #include <linux/input.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/leds-lp3944.h> + +#include <media/soc_camera.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -29,6 +33,7 @@ #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/pxa27x_keypad.h> +#include <mach/camera.h> #include "devices.h" #include "generic.h" @@ -38,6 +43,9 @@ #define GPIO15_A910_FLIP_LID 15 #define GPIO12_E680_LOCK_SWITCH 12 #define GPIO15_E6_LOCK_SWITCH 15 +#define GPIO50_nCAM_EN 50 +#define GPIO19_GEN1_CAM_RST 19 +#define GPIO28_GEN2_CAM_RST 28 static struct platform_pwm_backlight_data ezx_backlight_data = { .pwm_id = 0, @@ -191,8 +199,8 @@ static unsigned long gen1_pin_config[] __initdata = { GPIO94_CIF_DD_5, GPIO17_CIF_DD_6, GPIO108_CIF_DD_7, - GPIO50_GPIO, /* CAM_EN */ - GPIO19_GPIO, /* CAM_RST */ + GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */ + GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */ /* EMU */ GPIO120_GPIO, /* EMU_MUX1 */ @@ -248,8 +256,8 @@ static unsigned long gen2_pin_config[] __initdata = { GPIO48_CIF_DD_5, GPIO93_CIF_DD_6, GPIO12_CIF_DD_7, - GPIO50_GPIO, /* CAM_EN */ - GPIO28_GPIO, /* CAM_RST */ + GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */ + GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */ GPIO17_GPIO, /* CAM_FLASH */ }; #endif @@ -683,6 +691,81 @@ static struct platform_device a780_gpio_keys = { }, }; +/* camera */ +static int a780_camera_init(void) +{ + int err; + + /* + * GPIO50_nCAM_EN is active low + * GPIO19_GEN1_CAM_RST is active on rising edge + */ + err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN"); + if (err) { + pr_err("%s: Failed to request nCAM_EN\n", __func__); + goto fail; + } + + err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST"); + if (err) { + pr_err("%s: Failed to request CAM_RST\n", __func__); + goto fail_gpio_cam_rst; + } + + gpio_direction_output(GPIO50_nCAM_EN, 1); + gpio_direction_output(GPIO19_GEN1_CAM_RST, 0); + + return 0; + +fail_gpio_cam_rst: + gpio_free(GPIO50_nCAM_EN); +fail: + return err; +} + +static int a780_camera_power(struct device *dev, int on) +{ + gpio_set_value(GPIO50_nCAM_EN, !on); + return 0; +} + +static int a780_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO19_GEN1_CAM_RST, 0); + msleep(10); + gpio_set_value(GPIO19_GEN1_CAM_RST, 1); + + return 0; +} + +struct pxacamera_platform_data a780_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 5000, +}; + +static struct i2c_board_info a780_camera_i2c_board_info = { + I2C_BOARD_INFO("mt9m111", 0x5d), +}; + +static struct soc_camera_link a780_iclink = { + .bus_id = 0, + .flags = SOCAM_SENSOR_INVERT_PCLK, + .i2c_adapter_id = 0, + .board_info = &a780_camera_i2c_board_info, + .module_name = "mt9m111", + .power = a780_camera_power, + .reset = a780_camera_reset, +}; + +static struct platform_device a780_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &a780_iclink, + }, +}; + static struct platform_device *a780_devices[] __initdata = { &a780_gpio_keys, }; @@ -693,12 +776,21 @@ static void __init a780_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); set_pxa_fb_info(&ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); + if (a780_camera_init() == 0) { + pxa_set_camera_info(&a780_pxacamera_platform_data); + platform_device_register(&a780_camera); + } + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } @@ -754,6 +846,10 @@ static void __init e680_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info)); @@ -816,6 +912,10 @@ static void __init a1200_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info)); @@ -864,6 +964,131 @@ static struct platform_device a910_gpio_keys = { }, }; +/* camera */ +static int a910_camera_init(void) +{ + int err; + + /* + * GPIO50_nCAM_EN is active low + * GPIO28_GEN2_CAM_RST is active on rising edge + */ + err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN"); + if (err) { + pr_err("%s: Failed to request nCAM_EN\n", __func__); + goto fail; + } + + err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST"); + if (err) { + pr_err("%s: Failed to request CAM_RST\n", __func__); + goto fail_gpio_cam_rst; + } + + gpio_direction_output(GPIO50_nCAM_EN, 1); + gpio_direction_output(GPIO28_GEN2_CAM_RST, 0); + + return 0; + +fail_gpio_cam_rst: + gpio_free(GPIO50_nCAM_EN); +fail: + return err; +} + +static int a910_camera_power(struct device *dev, int on) +{ + gpio_set_value(GPIO50_nCAM_EN, !on); + return 0; +} + +static int a910_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO28_GEN2_CAM_RST, 0); + msleep(10); + gpio_set_value(GPIO28_GEN2_CAM_RST, 1); + + return 0; +} + +struct pxacamera_platform_data a910_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 5000, +}; + +static struct i2c_board_info a910_camera_i2c_board_info = { + I2C_BOARD_INFO("mt9m111", 0x5d), +}; + +static struct soc_camera_link a910_iclink = { + .bus_id = 0, + .i2c_adapter_id = 0, + .board_info = &a910_camera_i2c_board_info, + .module_name = "mt9m111", + .power = a910_camera_power, + .reset = a910_camera_reset, +}; + +static struct platform_device a910_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &a910_iclink, + }, +}; + +/* leds-lp3944 */ +static struct lp3944_platform_data a910_lp3944_leds = { + .leds_size = LP3944_LEDS_MAX, + .leds = { + [0] = { + .name = "a910:red:", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED, + }, + [1] = { + .name = "a910:green:", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED, + }, + [2] { + .name = "a910:blue:", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED, + }, + /* Leds 3 and 4 are used as display power switches */ + [3] = { + .name = "a910::cli_display", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED_INVERTED + }, + [4] = { + .name = "a910::main_display", + .status = LP3944_LED_STATUS_ON, + .type = LP3944_LED_TYPE_LED_INVERTED + }, + [5] = { .type = LP3944_LED_TYPE_NONE }, + [6] = { + .name = "a910::torch", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED, + }, + [7] = { + .name = "a910::flash", + .status = LP3944_LED_STATUS_OFF, + .type = LP3944_LED_TYPE_LED_INVERTED, + }, + }, +}; + +static struct i2c_board_info __initdata a910_i2c_board_info[] = { + { + I2C_BOARD_INFO("lp3944", 0x60), + .platform_data = &a910_lp3944_leds, + }, +}; + static struct platform_device *a910_devices[] __initdata = { &a910_gpio_keys, }; @@ -874,12 +1099,22 @@ static void __init a910_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info)); set_pxa_fb_info(&ezx_fb_info_2); pxa_set_keypad_info(&a910_keypad_platform_data); + if (a910_camera_init() == 0) { + pxa_set_camera_info(&a910_pxacamera_platform_data); + platform_device_register(&a910_camera); + } + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a910_devices)); } @@ -935,6 +1170,10 @@ static void __init e6_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info)); @@ -971,6 +1210,10 @@ static void __init e2_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config)); pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info)); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 485fede83d9..890fb90a672 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -67,3 +67,8 @@ extern struct sysdev_class pxa_irq_sysclass; extern struct sysdev_class pxa_gpio_sysclass; extern struct sysdev_class pxa2xx_mfp_sysclass; extern struct sysdev_class pxa3xx_mfp_sysclass; + +void __init pxa_set_ffuart_info(void *info); +void __init pxa_set_btuart_info(void *info); +void __init pxa_set_stuart_info(void *info); +void __init pxa_set_hwuart_info(void *info); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 1708c010984..96c34512913 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -211,6 +211,11 @@ static void __init gumstix_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_hwuart_info(NULL); + gumstix_bluetooth_init(); gumstix_udc_init(); gumstix_mmc_init(); diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index f3d220c32e0..c1cab0871c9 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -193,6 +193,9 @@ static void __init h5000_init(void) fix_msc(); pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); pxa_set_udc_info(&h5000_udc_mach_info); platform_add_devices(ARRAY_AND_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index cea99fe65b9..f9a2e4b0f09 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -150,6 +150,9 @@ static void __init himalaya_lcd_init(void) static void __init himalaya_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); himalaya_lcd_init(); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 83bd3c6e388..848c861dd23 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -820,6 +820,7 @@ static struct platform_device *devices[] __initdata = { &gpio_keys, &backlight, &w3220, + &hx4700_lcd, &egpio, &bq24022, &gpio_vbus, @@ -849,6 +850,10 @@ static void __init hx4700_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_ficp_info(&ficp_info); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index b6486ef20b1..5c9e11d74f4 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -179,6 +179,9 @@ static void __init idp_init(void) printk("idp_init()\n"); pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 2a4945db31c..5b0862df61a 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -554,8 +554,12 @@ static struct i2c_pxa_platform_data i2c_pdata = { static void __init imote2_init(void) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* SPI chip select directions - all other directions should * be handled by drivers.*/ gpio_direction_output(37, 0); diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index aa3d9f70a08..50f1297bf5a 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -105,6 +105,7 @@ * * PXA935 A0 0x56056931 0x1E653013 * PXA935 B0 0x56056936 0x6E653013 + * PXA935 B1 0x56056938 0x8E653013 */ #ifdef CONFIG_PXA25x #define __cpu_is_pxa210(id) \ @@ -283,7 +284,7 @@ _id == 0x3; \ }) -#define __cpu_is_pxa9xx(id) \ +#define __cpu_is_pxa93x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ _id == 0x683 || _id == 0x693; \ @@ -299,9 +300,9 @@ __cpu_is_pxa3xx(read_cpuid_id()); \ }) -#define cpu_is_pxa9xx() \ +#define cpu_is_pxa93x() \ ({ \ - __cpu_is_pxa9xx(read_cpuid_id()); \ + __cpu_is_pxa93x(read_cpuid_id()); \ }) /* * return current memory and LCD clock frequency in units of 10kHz diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h new file mode 100644 index 00000000000..2d3f14e3be2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -0,0 +1,67 @@ +/* + * GPIOs and interrupts for Palm Treo smartphones + * + * currently supported: + * Palm Treo 680 (GSM) + * Palm Centro 685 (GSM) + * + * Author: Tomas Cech <sleep_walker@suse.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * find more info at www.hackndev.com + * + */ + +#ifndef _INCLUDE_TREO_H_ +#define _INCLUDE_TREO_H_ + +/* GPIOs */ +#define GPIO_NR_TREO_POWER_DETECT 0 +#define GPIO_NR_TREO_AMP_EN 27 +#define GPIO_NR_TREO_GREEN_LED 20 +#define GPIO_NR_TREO_RED_LED 79 +#define GPIO_NR_TREO_SD_DETECT_N 113 +#define GPIO_NR_TREO_EP_DETECT_N 116 +#define GPIO_NR_TREO_USB_DETECT 1 +#define GPIO_NR_TREO_USB_PULLUP 114 +#define GPIO_NR_TREO_GSM_POWER 40 +#define GPIO_NR_TREO_GSM_RESET 87 +#define GPIO_NR_TREO_GSM_WAKE 57 +#define GPIO_NR_TREO_GSM_HOST_WAKE 14 +#define GPIO_NR_TREO_GSM_TRIGGER 10 +#define GPIO_NR_TREO_IR_EN 115 +#define GPIO_NR_TREO_IR_TXD 47 +#define GPIO_NR_TREO_BL_POWER 38 +#define GPIO_NR_TREO_LCD_POWER 25 + +/* Treo680 specific GPIOs */ +#ifdef CONFIG_MACH_TREO680 +#define GPIO_NR_TREO680_SD_READONLY 33 +#define GPIO_NR_TREO680_SD_POWER 42 +#define GPIO_NR_TREO680_VIBRATE_EN 44 +#define GPIO_NR_TREO680_KEYB_BL 24 +#define GPIO_NR_TREO680_BT_EN 43 +#endif /* CONFIG_MACH_TREO680 */ + +/* Centro685 specific GPIOs */ +#define GPIO_NR_CENTRO_SD_POWER 21 +#define GPIO_NR_CENTRO_VIBRATE_EN 22 +#define GPIO_NR_CENTRO_KEYB_BL 33 +#define GPIO_NR_CENTRO_BT_EN 80 + +/* Various addresses */ +#define TREO_PHYS_RAM_START 0xa0000000 +#define TREO_PHYS_IO_START 0x40000000 +#define TREO_STR_BASE 0xa2000000 + +/* BACKLIGHT */ +#define TREO_MAX_INTENSITY 254 +#define TREO_DEFAULT_INTENSITY 160 +#define TREO_LIMIT_MASK 0x7F +#define TREO_PRESCALER 63 +#define TREO_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index f73061c90b5..160ec83f51a 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -76,7 +76,8 @@ struct pxafb_mode_info { u_char bpp; u_int cmap_greyscale:1, depth:8, - unused:23; + transparency:1, + unused:22; /* Parallel Mode Timing */ u_char hsync_len; diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h new file mode 100644 index 00000000000..44b0b20b69a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h @@ -0,0 +1,199 @@ +#ifndef __ASM_ARCH_PXA3xx_U2D_H +#define __ASM_ARCH_PXA3xx_U2D_H + +#include <mach/bitfield.h> + +/* + * USB2 device controller registers and bits definitions + */ +#define U2DCR (0x0000) /* U2D Control Register */ +#define U2DCR_NDC (1 << 31) /* NAK During Config */ +#define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */ +#define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */ +#define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */ +#define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */ +#define U2DCR_ABP (1 << 21) /* Application Bus Power */ +#define U2DCR_ADD (1 << 20) /* Application Device Disconnect */ +#define U2DCR_CC (1 << 19) /* Configuration Change */ +#define U2DCR_HS (1 << 18) /* High Speed USB Detection */ +#define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */ +#define U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */ +#define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */ +#define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */ +#define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */ +#define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ +#define U2DCR_UDR (1 << 2) /* U2D Resume */ +#define U2DCR_UDA (1 << 1) /* U2D Active */ +#define U2DCR_UDE (1 << 0) /* U2D Enable */ + +#define U2DICR (0x0004) /* U2D Interrupt Control Register */ +#define U2DISR (0x000C) /* U2D Interrupt Status Register */ +#define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */ +#define U2DINT_SOF (1 << 30) /* Interrupt - SOF */ +#define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */ +#define U2DINT_RU (1 << 28) /* Interrupt - Resume */ +#define U2DINT_SU (1 << 27) /* Interrupt - Suspend */ +#define U2DINT_RS (1 << 26) /* Interrupt - Reset */ +#define U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */ +#define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */ +#define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */ +#define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */ + +#define U2DFNR (0x0014) /* U2D Frame Number Register */ + +#define U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3)) +#define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */ +#define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */ + +#define U2DOTGCR (0x0020) /* U2D OTG Control Register */ +#define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */ +#define U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */ +#define U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */ +#define U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */ + +#ifdef CONFIG_CPU_PXA930 +#define U2DOTGCR_LPA (1 << 15) /* ULPI low power mode active */ +#define U2DOTGCR_IESI (1 << 13) /* OTG interrupt Enable */ +#define U2DOTGCR_ISSI (1 << 12) /* OTG interrupt status */ +#endif + +#define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */ +#define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */ +#define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */ +#define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */ +#define U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */ +#define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */ + +#define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */ +#define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */ + +#define U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */ +#define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */ +#define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */ +#define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */ +#define U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */ +#define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */ +#define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */ +#define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */ +#define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */ +#define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */ +#define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */ +#define U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */ +#define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */ +#define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */ +#define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */ +#define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */ + +#define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */ +#define U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */ +#define U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */ +#define U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */ +#define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */ +#define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */ +#define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */ +#define U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */ +#define U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */ +#define U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */ +#define U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */ +#define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */ + +#define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */ +#define U2DOTGUCR_RUN (1 << 25) /* RUN */ +#define U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */ +#define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */ +#define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */ +#define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */ + +#define U2DP3CR (0x0034) /* U2D Port 3 Control Register */ +#define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */ +#define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */ +#define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */ +#define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */ + +#define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */ +#define U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */ +#define U2DCSR0_SA (1 << 7) /* SETUP Active */ +#define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define U2DCSR0_FST (1 << 5) /* Force Stall */ +#define U2DCSR0_SST (1 << 4) /* Send Stall */ +#define U2DCSR0_DME (1 << 3) /* DMA Enable */ +#define U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define U2DCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */ +#define U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */ +#define U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */ +#define U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */ +#define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */ +#define U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */ +#define U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */ +#define U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */ +#define U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */ +#define U2DCSR_DME (1 << 3) /* DMA Enable */ +#define U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */ +#define U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */ +#define U2DCSR_FS (1 << 0) /* FIFO needs Service */ + +#define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */ +#define U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */ + +#define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */ + +#define U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */ +#define U2DEPCR_EE (1 << 0) /* Endpoint Enable */ +#define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */ + +#define U2DSCA (0x0500) /* U2D Setup Command Address */ +#define U2DSCA_VALUE (0x0120) + +#define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */ +#define U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */ + +/* U2DMA registers */ +#define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */ +#define U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */ +#define U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */ +#define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */ +#define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */ +#define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */ +#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ +#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ +#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ +#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ +#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ +#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ +#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ + +#define U2DMACR (0x1080) /* U2DMA Control Register */ +#define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */ + +#define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */ +#define U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */ + +#define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */ +#define U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */ + +#define U2DMADADR_STOP (1U << 0) + +#define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */ +#define U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */ +#define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */ +#define U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */ + +#define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */ +#define U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */ + +#define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */ +#define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */ +#define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */ + +#endif /* __ASM_ARCH_PXA3xx_U2D_H */ diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h deleted file mode 100644 index af443b24d99..00000000000 --- a/arch/arm/mach-pxa/include/mach/treo680.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * GPIOs and interrupts for Palm Treo 680 smartphone - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _INCLUDE_TREO680_H_ -#define _INCLUDE_TREO680_H_ - -/* GPIOs */ -#define GPIO_NR_TREO680_POWER_DETECT 0 -#define GPIO_NR_TREO680_AMP_EN 27 -#define GPIO_NR_TREO680_KEYB_BL 24 -#define GPIO_NR_TREO680_VIBRATE_EN 44 -#define GPIO_NR_TREO680_GREEN_LED 20 -#define GPIO_NR_TREO680_RED_LED 79 -#define GPIO_NR_TREO680_SD_DETECT_N 113 -#define GPIO_NR_TREO680_SD_READONLY 33 -#define GPIO_NR_TREO680_EP_DETECT_N 116 -#define GPIO_NR_TREO680_SD_POWER 42 -#define GPIO_NR_TREO680_USB_DETECT 1 -#define GPIO_NR_TREO680_USB_PULLUP 114 -#define GPIO_NR_TREO680_GSM_POWER 40 -#define GPIO_NR_TREO680_GSM_RESET 87 -#define GPIO_NR_TREO680_GSM_WAKE 57 -#define GPIO_NR_TREO680_GSM_HOST_WAKE 14 -#define GPIO_NR_TREO680_GSM_TRIGGER 10 -#define GPIO_NR_TREO680_BT_EN 43 -#define GPIO_NR_TREO680_IR_EN 115 -#define GPIO_NR_TREO680_IR_TXD 47 -#define GPIO_NR_TREO680_BL_POWER 38 -#define GPIO_NR_TREO680_LCD_POWER 25 - -/* Various addresses */ -#define TREO680_PHYS_RAM_START 0xa0000000 -#define TREO680_PHYS_IO_START 0x40000000 -#define TREO680_STR_BASE 0xa2000000 - -/* BACKLIGHT */ -#define TREO680_MAX_INTENSITY 254 -#define TREO680_DEFAULT_INTENSITY 160 -#define TREO680_LIMIT_MASK 0x7F -#define TREO680_PRESCALER 63 -#define TREO680_PERIOD_NS 3500 - -#endif diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 13848955d13..f28c1715b91 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -44,10 +44,10 @@ #include <mach/ssp.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> -#include <plat/i2c.h> #include <mach/pxa27x_keypad.h> -#include <mach/pxa3xx_nand.h> #include <mach/littleton.h> +#include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> #include "generic.h" @@ -413,6 +413,10 @@ static void __init littleton_init(void) /* initialize MFP configurations */ pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* * Note: we depend bootloader set the correct * value to MSC register for SMC91x. diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index d64395f26a3..1373c22dbb8 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -455,6 +455,10 @@ static void __init lpd270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; lpd270_flash_data[1].width = 4; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index c6a94d3fdd6..98ee7e59029 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -518,6 +518,10 @@ static void __init lubbock_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5360c07f513..8a38d604dc7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -742,6 +742,10 @@ static void __init magician_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_add_devices(ARRAY_AND_SIZE(devices)); err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index a4eeae345e6..851ee0fc32e 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -576,6 +576,10 @@ static void __init mainstone_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; mst_flash_data[1].width = 4; diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 3cab452e556..2466a44d8fd 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -798,6 +798,9 @@ static void __init mioa701_machine_init(void) UP2OCR = UP2OCR_HXOE; pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); set_pxa_fb_info(&mioa701_pxafb_info); diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index a65713ce019..6d4503927a7 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -84,6 +84,9 @@ static struct platform_device *devices[] __initdata = { static void __init mp900c_init(void) { printk(KERN_INFO "MobilePro 900/C machine init\n"); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1ad029dd443..59140217890 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -530,6 +530,10 @@ static void __init palmld_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + palmld_pm_init(); set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 2dd7ce28556..7f89ca20f13 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -419,6 +419,10 @@ static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + palmt5_pm_init(); set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 0b92291a58f..30841759200 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -416,6 +416,11 @@ static void __init palmtc_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_hwuart_info(NULL); + set_pxa_fb_info(&palmtc_lcd_screen); pxa_set_mci_info(&palmtc_mci_platform_data); pxa_set_udc_info(&palmtc_udc_info); diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 277c4062e3c..265d62bae7d 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -373,6 +373,10 @@ static void __init palmte2_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + set_pxa_fb_info(&palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/palmtreo.c index fe085076fbf..606eb7e8a17 100644 --- a/arch/arm/mach-pxa/treo680.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -1,5 +1,9 @@ /* - * Hardware definitions for Palm Treo 680 + * Hardware definitions for Palm Treo smartphones + * + * currently supported: + * Palm Treo 680 (GSM) + * Palm Centro 685 (GSM) * * Author: Tomas Cech <sleep_walker@suse.cz> * @@ -31,7 +35,7 @@ #include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/audio.h> -#include <mach/treo680.h> +#include <mach/palmtreo.h> #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> @@ -50,7 +54,7 @@ /****************************************************************************** * Pin configuration ******************************************************************************/ -static unsigned long treo680_pin_config[] __initdata = { +static unsigned long treo_pin_config[] __initdata = { /* MMC */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, @@ -58,7 +62,6 @@ static unsigned long treo680_pin_config[] __initdata = { GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, - GPIO33_GPIO, /* SD read only */ GPIO113_GPIO, /* SD detect */ /* AC97 */ @@ -80,12 +83,10 @@ static unsigned long treo680_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, GPIO101_KP_MKIN_1, GPIO102_KP_MKIN_2, GPIO97_KP_MKIN_3, GPIO98_KP_MKIN_4, - GPIO99_KP_MKIN_5, GPIO91_KP_MKIN_6, GPIO13_KP_MKIN_7, GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH, @@ -150,19 +151,57 @@ static unsigned long treo680_pin_config[] __initdata = { GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */ }; +#ifdef CONFIG_MACH_TREO680 +static unsigned long treo680_pin_config[] __initdata = { + GPIO33_GPIO, /* SD read only */ + + /* MATRIX KEYPAD - different wake up source */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO99_KP_MKIN_5, +}; +#endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static unsigned long centro685_pin_config[] __initdata = { + /* Bluetooth attached to BT UART*/ + MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* MATRIX KEYPAD - different wake up source */ + GPIO100_KP_MKIN_0, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, +}; +#endif /* CONFIG_MACH_CENTRO */ + /****************************************************************************** * SD/MMC card controller ******************************************************************************/ +#ifdef CONFIG_MACH_TREO680 static struct pxamci_platform_data treo680_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N, + .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N, .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY, .gpio_power = GPIO_NR_TREO680_SD_POWER, }; +#endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static struct pxamci_platform_data centro_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N, + .gpio_card_ro = -1, + .gpio_power = GPIO_NR_CENTRO_SD_POWER, + .gpio_power_invert = 1, +}; +#endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** * GPIO keyboard ******************************************************************************/ +#ifdef CONFIG_MACH_TREO680 static unsigned int treo680_matrix_keys[] = { KEY(0, 0, KEY_F8), /* Red/Off/Power */ KEY(0, 1, KEY_LEFT), @@ -232,92 +271,167 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = { .debounce_interval = 30, }; +#endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static unsigned int centro_matrix_keys[] = { + KEY(0, 0, KEY_F9), /* Home */ + KEY(0, 1, KEY_LEFT), + KEY(0, 2, KEY_LEFTCTRL), /* Alternate */ + KEY(0, 3, KEY_L), + KEY(0, 4, KEY_A), + KEY(0, 5, KEY_Q), + KEY(0, 6, KEY_P), + + KEY(1, 0, KEY_RIGHTCTRL), /* Menu */ + KEY(1, 1, KEY_RIGHT), + KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */ + KEY(1, 3, KEY_Z), + KEY(1, 4, KEY_S), + KEY(1, 5, KEY_W), + + KEY(2, 0, KEY_F1), /* Phone */ + KEY(2, 1, KEY_UP), + KEY(2, 2, KEY_0), + KEY(2, 3, KEY_X), + KEY(2, 4, KEY_D), + KEY(2, 5, KEY_E), + + KEY(3, 0, KEY_F10), /* Calendar */ + KEY(3, 1, KEY_DOWN), + KEY(3, 2, KEY_SPACE), + KEY(3, 3, KEY_C), + KEY(3, 4, KEY_F), + KEY(3, 5, KEY_R), + + KEY(4, 0, KEY_F12), /* Mail */ + KEY(4, 1, KEY_KPENTER), + KEY(4, 2, KEY_RIGHTALT), /* Alt */ + KEY(4, 3, KEY_V), + KEY(4, 4, KEY_G), + KEY(4, 5, KEY_T), + + KEY(5, 0, KEY_F8), /* Red/Off/Power */ + KEY(5, 1, KEY_PAGEUP), /* Side up */ + KEY(5, 2, KEY_DOT), + KEY(5, 3, KEY_B), + KEY(5, 4, KEY_H), + KEY(5, 5, KEY_Y), + + KEY(6, 0, KEY_TAB), /* Side Activate */ + KEY(6, 1, KEY_PAGEDOWN), /* Side down */ + KEY(6, 2, KEY_ENTER), + KEY(6, 3, KEY_N), + KEY(6, 4, KEY_J), + KEY(6, 5, KEY_U), + + KEY(7, 0, KEY_F6), /* Green/Call */ + KEY(7, 1, KEY_O), + KEY(7, 2, KEY_BACKSPACE), + KEY(7, 3, KEY_M), + KEY(7, 4, KEY_K), + KEY(7, 5, KEY_I), +}; + +static struct pxa27x_keypad_platform_data centro_keypad_platform_data = { + .matrix_key_rows = 8, + .matrix_key_cols = 7, + .matrix_key_map = centro_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys), + .direct_key_map = { KEY_CONNECT }, + .direct_key_num = 1, + + .debounce_interval = 30, +}; +#endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** * aSoC audio ******************************************************************************/ -static pxa2xx_audio_ops_t treo680_ac97_pdata = { +static pxa2xx_audio_ops_t treo_ac97_pdata = { .reset_gpio = 95, }; /****************************************************************************** * Backlight ******************************************************************************/ -static int treo680_backlight_init(struct device *dev) +static int treo_backlight_init(struct device *dev) { int ret; - ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER"); + ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER"); if (ret) goto err; - ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0); + ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0); if (ret) goto err2; return 0; err2: - gpio_free(GPIO_NR_TREO680_BL_POWER); + gpio_free(GPIO_NR_TREO_BL_POWER); err: return ret; } -static int treo680_backlight_notify(int brightness) +static int treo_backlight_notify(int brightness) { - gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness); - return TREO680_MAX_INTENSITY - brightness; + gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness); + return TREO_MAX_INTENSITY - brightness; }; -static void treo680_backlight_exit(struct device *dev) +static void treo_backlight_exit(struct device *dev) { - gpio_free(GPIO_NR_TREO680_BL_POWER); + gpio_free(GPIO_NR_TREO_BL_POWER); } -static struct platform_pwm_backlight_data treo680_backlight_data = { +static struct platform_pwm_backlight_data treo_backlight_data = { .pwm_id = 0, - .max_brightness = TREO680_MAX_INTENSITY, - .dft_brightness = TREO680_DEFAULT_INTENSITY, - .pwm_period_ns = TREO680_PERIOD_NS, - .init = treo680_backlight_init, - .notify = treo680_backlight_notify, - .exit = treo680_backlight_exit, + .max_brightness = TREO_MAX_INTENSITY, + .dft_brightness = TREO_DEFAULT_INTENSITY, + .pwm_period_ns = TREO_PERIOD_NS, + .init = treo_backlight_init, + .notify = treo_backlight_notify, + .exit = treo_backlight_exit, }; -static struct platform_device treo680_backlight = { +static struct platform_device treo_backlight = { .name = "pwm-backlight", .dev = { .parent = &pxa27x_device_pwm0.dev, - .platform_data = &treo680_backlight_data, + .platform_data = &treo_backlight_data, }, }; /****************************************************************************** * IrDA ******************************************************************************/ -static struct pxaficp_platform_data treo680_ficp_info = { - .gpio_pwdown = GPIO_NR_TREO680_IR_EN, +static struct pxaficp_platform_data treo_ficp_info = { + .gpio_pwdown = GPIO_NR_TREO_IR_EN, .transceiver_cap = IR_SIRMODE | IR_OFF, }; /****************************************************************************** * UDC ******************************************************************************/ -static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = { - .gpio_vbus = GPIO_NR_TREO680_USB_DETECT, +static struct pxa2xx_udc_mach_info treo_udc_info __initdata = { + .gpio_vbus = GPIO_NR_TREO_USB_DETECT, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP, + .gpio_pullup = GPIO_NR_TREO_USB_PULLUP, }; /****************************************************************************** * USB host ******************************************************************************/ +#ifdef CONFIG_MACH_TREO680 static struct pxaohci_platform_data treo680_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT3, .power_budget = 0, }; +#endif /* CONFIG_MACH_TREO680 */ /****************************************************************************** * Power supply @@ -326,41 +440,41 @@ static int power_supply_init(struct device *dev) { int ret; - ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC"); + ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC"); if (ret) goto err1; - ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT); + ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT); if (ret) goto err2; return 0; err2: - gpio_free(GPIO_NR_TREO680_POWER_DETECT); + gpio_free(GPIO_NR_TREO_POWER_DETECT); err1: return ret; } -static int treo680_is_ac_online(void) +static int treo_is_ac_online(void) { - return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT); + return gpio_get_value(GPIO_NR_TREO_POWER_DETECT); } static void power_supply_exit(struct device *dev) { - gpio_free(GPIO_NR_TREO680_POWER_DETECT); + gpio_free(GPIO_NR_TREO_POWER_DETECT); } -static char *treo680_supplicants[] = { +static char *treo_supplicants[] = { "main-battery", }; static struct pda_power_pdata power_supply_info = { .init = power_supply_init, - .is_ac_online = treo680_is_ac_online, + .is_ac_online = treo_is_ac_online, .exit = power_supply_exit, - .supplied_to = treo680_supplicants, - .num_supplicants = ARRAY_SIZE(treo680_supplicants), + .supplied_to = treo_supplicants, + .num_supplicants = ARRAY_SIZE(treo_supplicants), }; static struct platform_device power_supply = { @@ -374,7 +488,8 @@ static struct platform_device power_supply = { /****************************************************************************** * Vibra and LEDs ******************************************************************************/ -static struct gpio_led gpio_leds[] = { +#ifdef CONFIG_MACH_TREO680 +static struct gpio_led treo680_gpio_leds[] = { { .name = "treo680:vibra:vibra", .default_trigger = "none", @@ -383,34 +498,68 @@ static struct gpio_led gpio_leds[] = { { .name = "treo680:green:led", .default_trigger = "mmc0", - .gpio = GPIO_NR_TREO680_GREEN_LED, + .gpio = GPIO_NR_TREO_GREEN_LED, }, { - .name = "treo680:keybbl:keybbl", + .name = "treo680:white:keybbl", .default_trigger = "none", .gpio = GPIO_NR_TREO680_KEYB_BL, }, }; -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), +static struct gpio_led_platform_data treo680_gpio_led_info = { + .leds = treo680_gpio_leds, + .num_leds = ARRAY_SIZE(treo680_gpio_leds), }; static struct platform_device treo680_leds = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &gpio_led_info, + .platform_data = &treo680_gpio_led_info, } }; +#endif /* CONFIG_MACH_TREO680 */ +#ifdef CONFIG_MACH_CENTRO +static struct gpio_led centro_gpio_leds[] = { + { + .name = "centro:vibra:vibra", + .default_trigger = "none", + .gpio = GPIO_NR_CENTRO_VIBRATE_EN, + }, + { + .name = "centro:green:led", + .default_trigger = "mmc0", + .gpio = GPIO_NR_TREO_GREEN_LED, + }, + { + .name = "centro:white:keybbl", + .default_trigger = "none", + .active_low = 1, + .gpio = GPIO_NR_CENTRO_KEYB_BL, + }, +}; + +static struct gpio_led_platform_data centro_gpio_led_info = { + .leds = centro_gpio_leds, + .num_leds = ARRAY_SIZE(centro_gpio_leds), +}; + +static struct platform_device centro_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = ¢ro_gpio_led_info, + } +}; +#endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** * Framebuffer ******************************************************************************/ /* TODO: add support for 324x324 */ -static struct pxafb_mode_info treo680_lcd_modes[] = { +static struct pxafb_mode_info treo_lcd_modes[] = { { .pixclock = 86538, .xres = 320, @@ -427,21 +576,21 @@ static struct pxafb_mode_info treo680_lcd_modes[] = { }, }; -static void treo680_lcd_power(int on, struct fb_var_screeninfo *info) +static void treo_lcd_power(int on, struct fb_var_screeninfo *info) { - gpio_set_value(GPIO_NR_TREO680_BL_POWER, on); + gpio_set_value(GPIO_NR_TREO_BL_POWER, on); } -static struct pxafb_mach_info treo680_lcd_screen = { - .modes = treo680_lcd_modes, - .num_modes = ARRAY_SIZE(treo680_lcd_modes), +static struct pxafb_mach_info treo_lcd_screen = { + .modes = treo_lcd_modes, + .num_modes = ARRAY_SIZE(treo_lcd_modes), .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; /****************************************************************************** * Power management - standby ******************************************************************************/ -static void __init treo680_pm_init(void) +static void __init treo_pm_init(void) { static u32 resume[] = { 0xe3a00101, /* mov r0, #0x40000000 */ @@ -450,70 +599,118 @@ static void __init treo680_pm_init(void) }; /* this is where the bootloader jumps */ - memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume)); + memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume)); } /****************************************************************************** * Machine init ******************************************************************************/ -static struct platform_device *devices[] __initdata = { - &treo680_backlight, - &treo680_leds, +static struct platform_device *treo_devices[] __initdata = { + &treo_backlight, &power_supply, }; +#ifdef CONFIG_MACH_TREO680 +static struct platform_device *treo680_devices[] __initdata = { + &treo680_leds, +}; +#endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static struct platform_device *centro_devices[] __initdata = { + ¢ro_leds, +}; +#endif /* CONFIG_MACH_CENTRO */ + /* setup udc GPIOs initial state */ -static void __init treo680_udc_init(void) +static void __init treo_udc_init(void) { - if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1); - gpio_free(GPIO_NR_TREO680_USB_PULLUP); + if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1); + gpio_free(GPIO_NR_TREO_USB_PULLUP); } } -static void __init treo680_lcd_power_init(void) +static void __init treo_lcd_power_init(void) { int ret; - ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER"); + ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER"); if (ret) { pr_err("Treo680: LCD power GPIO request failed!\n"); return; } - ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0); + ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0); if (ret) { pr_err("Treo680: setting LCD power GPIO direction failed!\n"); - gpio_free(GPIO_NR_TREO680_LCD_POWER); + gpio_free(GPIO_NR_TREO_LCD_POWER); return; } - treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power; + treo_lcd_screen.pxafb_lcd_power = treo_lcd_power; } +static void __init treo_init(void) +{ + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + treo_pm_init(); + pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config)); + treo_lcd_power_init(); + set_pxa_fb_info(&treo_lcd_screen); + treo_udc_init(); + pxa_set_udc_info(&treo_udc_info); + pxa_set_ac97_info(&treo_ac97_pdata); + pxa_set_ficp_info(&treo_ficp_info); + + platform_add_devices(ARRAY_AND_SIZE(treo_devices)); +} + +#ifdef CONFIG_MACH_TREO680 static void __init treo680_init(void) { - treo680_pm_init(); + treo_init(); pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); - pxa_set_keypad_info(&treo680_keypad_platform_data); - treo680_lcd_power_init(); - set_pxa_fb_info(&treo680_lcd_screen); pxa_set_mci_info(&treo680_mci_platform_data); - treo680_udc_init(); - pxa_set_udc_info(&treo680_udc_info); - pxa_set_ac97_info(&treo680_ac97_pdata); - pxa_set_ficp_info(&treo680_ficp_info); + pxa_set_keypad_info(&treo680_keypad_platform_data); pxa_set_ohci_info(&treo680_ohci_info); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(treo680_devices)); } MACHINE_START(TREO680, "Palm Treo 680") - .phys_io = TREO680_PHYS_IO_START, - .io_pg_offst = io_p2v(0x40000000), - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa27x_init_irq, - .timer = &pxa_timer, - .init_machine = treo680_init, + .phys_io = TREO_PHYS_IO_START, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = treo680_init, +MACHINE_END +#endif /* CONFIG_MACH_TREO680 */ + +#ifdef CONFIG_MACH_CENTRO +static void __init centro_init(void) +{ + treo_init(); + pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); + pxa_set_mci_info(¢ro_mci_platform_data); + + pxa_set_keypad_info(¢ro_keypad_platform_data); + + platform_add_devices(ARRAY_AND_SIZE(centro_devices)); +} + +MACHINE_START(CENTRO, "Palm Centro 685") + .phys_io = TREO_PHYS_IO_START, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = centro_init, MACHINE_END +#endif /* CONFIG_MACH_CENTRO */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 76a2b37eaf3..7bf18c2f002 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -570,6 +570,10 @@ static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + palmtx_pm_init(); set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index c2bf493c5f5..d787ac7cfdd 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -491,6 +491,10 @@ static void __init palmz72_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + set_pxa_fb_info(&palmz72_lcd_screen); pxa_set_mci_info(&palmz72_mci_platform_data); palmz72_udc_init(); diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 6abfa2979c6..2190af06647 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -227,6 +227,10 @@ static void __init pcm027_init(void) pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); /* at last call the baseboard to initialize itself */ diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index bbda57078e0..d5255ae74fe 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = { GPIO44_CIF_LV, }; -static int pcm990_pxacamera_init(struct device *dev) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); - return 0; -} - /* * CICR4: PCLK_EN: Pixel clock is supplied by the sensor * MCLK_EN: Master clock is generated by PXA * PCP: Data sampled on the falling edge of pixel clock */ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { - .init = pcm990_pxacamera_init, .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/, .mclk_10khz = 1000, @@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void) pxa_set_ac97_info(NULL); #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) + pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); pxa_set_camera_info(&pcm990_pxacamera_platform_data); i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index a186994f77f..e5eeb3a62d0 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -449,6 +449,10 @@ static void __init poodle_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 77c2693cfee..2c1b0b70d01 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -322,9 +322,6 @@ void __init pxa26x_init_irq(void) static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_udc, - &pxa_device_ffuart, - &pxa_device_btuart, - &pxa_device_stuart, &pxa_device_i2s, &sa1100_device_rtc, &pxa25x_device_ssp, @@ -372,10 +369,8 @@ static int __init pxa25x_init(void) } /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ - if (cpu_is_pxa255()) { + if (cpu_is_pxa255()) clks_register(&pxa25x_hwuart_clkreg, 1); - ret = platform_device_register(&pxa_device_hwuart); - } return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index ec68cc16b4e..6a0b73167e0 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -364,9 +364,6 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct platform_device *devices[] __initdata = { &pxa27x_device_udc, - &pxa_device_ffuart, - &pxa_device_btuart, - &pxa_device_stuart, &pxa_device_i2s, &sa1100_device_rtc, &pxa_device_rtc, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 09b7b1a10ca..fcb0721f466 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -30,6 +30,7 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/ssp.h> +#include <mach/regs-intc.h> #include <plat/i2c.h> #include "generic.h" @@ -45,6 +46,9 @@ #define ACCR_D0CS (1 << 26) #define ACCR_PCCE (1 << 11) +#define PECR_IE(n) ((1 << ((n) * 2)) << 28) +#define PECR_IS(n) ((1 << ((n) * 2)) << 29) + /* crystal frequency to static memory controller multiplier (SMCFS) */ static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; @@ -237,6 +241,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1); static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0); static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5); static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0); +static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0); static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0); @@ -261,6 +266,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL), INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL), INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), + INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"), INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL), INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL), @@ -530,6 +536,43 @@ static inline void pxa3xx_init_pm(void) {} #define pxa3xx_set_wake NULL #endif +static void pxa_ack_ext_wakeup(unsigned int irq) +{ + PECR |= PECR_IS(irq - IRQ_WAKEUP0); +} + +static void pxa_mask_ext_wakeup(unsigned int irq) +{ + ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f)); + PECR &= ~PECR_IE(irq - IRQ_WAKEUP0); +} + +static void pxa_unmask_ext_wakeup(unsigned int irq) +{ + ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f); + PECR |= PECR_IE(irq - IRQ_WAKEUP0); +} + +static struct irq_chip pxa_ext_wakeup_chip = { + .name = "WAKEUP", + .ack = pxa_ack_ext_wakeup, + .mask = pxa_mask_ext_wakeup, + .unmask = pxa_unmask_ext_wakeup, +}; + +static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) +{ + int irq; + + for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) { + set_irq_chip(irq, &pxa_ext_wakeup_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID); + } + + pxa_ext_wakeup_chip.set_wake = fn; +} + void __init pxa3xx_init_irq(void) { /* enable CP6 access */ @@ -539,6 +582,7 @@ void __init pxa3xx_init_irq(void) __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); pxa_init_irq(56, pxa3xx_set_wake); + pxa_init_ext_wakeup_irq(pxa3xx_set_wake); pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } @@ -553,9 +597,6 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) static struct platform_device *devices[] __initdata = { &pxa27x_device_udc, - &pxa_device_ffuart, - &pxa_device_btuart, - &pxa_device_stuart, &pxa_device_i2s, &sa1100_device_rtc, &pxa_device_rtc, diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 8241a63ea58..115b6f234bd 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -22,9 +22,13 @@ #include <linux/i2c.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/onenand.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/flash.h> #include <mach/pxa930.h> #include <plat/i2c.h> @@ -33,7 +37,7 @@ #include "devices.h" #include "generic.h" -#define GPIO_LCD_RESET (16) +#define GPIO_LCD_RESET (16) /* SAAR MFP configurations */ static mfp_cfg_t saar_mfp_cfg[] __initdata = { @@ -56,6 +60,31 @@ static mfp_cfg_t saar_mfp_cfg[] __initdata = { /* Ethernet */ DF_nCS1_nCS3, GPIO97_GPIO, + + /* DFI */ + DF_INT_RnB_ND_INT_RnB, + DF_nRE_nOE_ND_nRE, + DF_nWE_ND_nWE, + DF_CLE_nOE_ND_CLE, + DF_nADV1_ALE_ND_ALE, + DF_nADV2_ALE_nCS3, + DF_nCS0_ND_nCS0, + DF_IO0_ND_IO0, + DF_IO1_ND_IO1, + DF_IO2_ND_IO2, + DF_IO3_ND_IO3, + DF_IO4_ND_IO4, + DF_IO5_ND_IO5, + DF_IO6_ND_IO6, + DF_IO7_ND_IO7, + DF_IO8_ND_IO8, + DF_IO9_ND_IO9, + DF_IO10_ND_IO10, + DF_IO11_ND_IO11, + DF_IO12_ND_IO12, + DF_IO13_ND_IO13, + DF_IO14_ND_IO14, + DF_IO15_ND_IO15, }; #define SAAR_ETH_PHYS (0x14000000) @@ -451,10 +480,15 @@ static inline void saar_init_lcd(void) {} #endif #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct da9034_backlight_pdata saar_da9034_backlight = { + .output_current = 4, /* 4mA */ +}; + static struct da903x_subdev_info saar_da9034_subdevs[] = { [0] = { .name = "da903x-backlight", .id = DA9034_ID_WLED, + .platform_data = &saar_da9034_backlight, }, }; @@ -480,12 +514,81 @@ static void __init saar_init_i2c(void) #else static inline void saar_init_i2c(void) {} #endif + +#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) +static struct mtd_partition saar_onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_8M, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (SZ_2M + SZ_1M), + .mask_flags = 0, + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = SZ_48M, + .mask_flags = 0, + } +}; + +static struct onenand_platform_data saar_onenand_info = { + .parts = saar_onenand_partitions, + .nr_parts = ARRAY_SIZE(saar_onenand_partitions), +}; + +#define SMC_CS0_PHYS_BASE (0x10000000) + +static struct resource saar_resource_onenand[] = { + [0] = { + .start = SMC_CS0_PHYS_BASE, + .end = SMC_CS0_PHYS_BASE + SZ_1M, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device saar_device_onenand = { + .name = "onenand-flash", + .id = -1, + .dev = { + .platform_data = &saar_onenand_info, + }, + .resource = saar_resource_onenand, + .num_resources = ARRAY_SIZE(saar_resource_onenand), +}; + +static void __init saar_init_onenand(void) +{ + platform_device_register(&saar_device_onenand); +} +#else +static void __init saar_init_onenand(void) {} +#endif + static void __init saar_init(void) { /* initialize MFP configurations */ pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_device_register(&smc91x_device); + saar_init_onenand(); saar_init_i2c(); saar_init_lcd(); diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 55259f4756c..1439785d397 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -42,8 +42,8 @@ void corgi_lcdtg_hw_init(int mode); #define MAX1111_BATT_TEMP 2u #define MAX1111_ACIN_VOLT 6u -extern struct battery_thresh spitz_battery_levels_acin[]; -extern struct battery_thresh spitz_battery_levels_noac[]; +extern struct battery_thresh sharpsl_battery_levels_acin[]; +extern struct battery_thresh sharpsl_battery_levels_noac[]; int sharpsl_pm_pxa_read_max1111(int channel); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 629e05d1196..67229a1ef55 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -78,7 +78,7 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); -struct battery_thresh spitz_battery_levels_acin[] = { +struct battery_thresh sharpsl_battery_levels_acin[] = { { 213, 100}, { 212, 98}, { 211, 95}, @@ -121,7 +121,7 @@ struct battery_thresh spitz_battery_levels_acin[] = { { 0, 0}, }; -struct battery_thresh spitz_battery_levels_noac[] = { +struct battery_thresh sharpsl_battery_levels_noac[] = { { 213, 100}, { 212, 98}, { 211, 95}, @@ -165,19 +165,20 @@ struct battery_thresh spitz_battery_levels_noac[] = { }; /* MAX1111 Commands */ -#define MAXCTRL_PD0 1u << 0 -#define MAXCTRL_PD1 1u << 1 -#define MAXCTRL_SGL 1u << 2 -#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_PD0 (1u << 0) +#define MAXCTRL_PD1 (1u << 1) +#define MAXCTRL_SGL (1u << 2) +#define MAXCTRL_UNI (1u << 3) #define MAXCTRL_SEL_SH 4 -#define MAXCTRL_STR 1u << 7 +#define MAXCTRL_STR (1u << 7) /* * Read MAX1111 ADC */ int sharpsl_pm_pxa_read_max1111(int channel) { - if (machine_is_tosa()) // Ugly, better move this function into another module + /* Ugly, better move this function into another module */ + if (machine_is_tosa()) return 0; #ifdef CONFIG_CORGI_SSP_DEPRECATED @@ -238,7 +239,7 @@ EXPORT_SYMBOL(sharpsl_battery_kick); static void sharpsl_battery_thread(struct work_struct *private_) { - int voltage, percent, apm_status, i = 0; + int voltage, percent, apm_status, i; if (!sharpsl_pm.machinfo) return; @@ -250,15 +251,14 @@ static void sharpsl_battery_thread(struct work_struct *private_) && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) schedule_delayed_work(&toggle_charger, 0); - while(1) { + for (i = 0; i < 5; i++) { voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - - if (voltage > 0) break; - if (i++ > 5) { - voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; - dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + if (voltage > 0) break; - } + } + if (voltage <= 0) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); } voltage = sharpsl_average_value(voltage); @@ -266,8 +266,10 @@ static void sharpsl_battery_thread(struct work_struct *private_) percent = get_percentage(voltage); /* At low battery voltages, the voltage has a tendency to start - creeping back up so we try to avoid this here */ - if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) + || (apm_status == APM_BATTERY_STATUS_HIGH) + || percent <= sharpsl_pm.battstat.mainbat_percent) { sharpsl_pm.battstat.mainbat_voltage = voltage; sharpsl_pm.battstat.mainbat_status = apm_status; sharpsl_pm.battstat.mainbat_percent = percent; @@ -279,8 +281,8 @@ static void sharpsl_battery_thread(struct work_struct *private_) #ifdef CONFIG_BACKLIGHT_CORGI /* If battery is low. limit backlight intensity to save power. */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || - (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) + || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { sharpsl_pm.machinfo->backlight_limit(1); sharpsl_pm.flags |= SHARPSL_BL_LIMIT; @@ -293,8 +295,8 @@ static void sharpsl_battery_thread(struct work_struct *private_) /* Suspend if critical battery level */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) - && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { sharpsl_pm.flags |= SHARPSL_APM_QUEUED; dev_err(sharpsl_pm.dev, "Fatal Off\n"); apm_queue_event(APM_CRITICAL_SUSPEND); @@ -346,7 +348,7 @@ static void sharpsl_charge_error(void) static void sharpsl_charge_toggle(struct work_struct *private_) { - dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies); if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { sharpsl_charge_off(); @@ -368,7 +370,7 @@ static void sharpsl_ac_timer(unsigned long data) { int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin); sharpsl_average_clear(); if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) @@ -472,14 +474,14 @@ static int sharpsl_average_value(int ad) sharpsl_ad[sharpsl_ad_index] = ad; sharpsl_ad_index++; if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { - for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) sharpsl_ad[i] = sharpsl_ad[i+1]; sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; } - for (i=0; i < sharpsl_ad_index; i++) + for (i = 0; i < sharpsl_ad_index; i++) ad_val += sharpsl_ad[i]; - return (ad_val / sharpsl_ad_index); + return ad_val / sharpsl_ad_index; } /* @@ -492,8 +494,8 @@ static int get_select_val(int *val) /* Find MAX val */ temp = val[0]; - j=0; - for (i=1; i<5; i++) { + j = 0; + for (i = 1; i < 5; i++) { if (temp < val[i]) { temp = val[i]; j = i; @@ -502,21 +504,21 @@ static int get_select_val(int *val) /* Find MIN val */ temp = val[4]; - k=4; - for (i=3; i>=0; i--) { + k = 4; + for (i = 3; i >= 0; i--) { if (temp > val[i]) { temp = val[i]; k = i; } } - for (i=0; i<5; i++) - if (i != j && i != k ) + for (i = 0; i < 5; i++) + if (i != j && i != k) sum += val[i]; dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); - return (sum/3); + return sum/3; } static int sharpsl_check_battery_temp(void) @@ -524,7 +526,7 @@ static int sharpsl_check_battery_temp(void) int val, i, buff[5]; /* Check battery temperature */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); sharpsl_pm.machinfo->measure_temp(1); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); @@ -557,7 +559,7 @@ static int sharpsl_check_battery_voltage(void) sharpsl_pm.machinfo->discharge1(1); /* Check battery voltage */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -581,16 +583,16 @@ static int sharpsl_ac_check(void) { int temp, i, buff[5]; - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); } temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp); if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { - dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp); return -1; } @@ -624,9 +626,9 @@ static int sharpsl_pm_resume(struct platform_device *pdev) static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) { - dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR); - dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); /* not charging and AC-IN! */ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { @@ -644,12 +646,12 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { RTSR &= RTSR_ALE; RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; - dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR); sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; } else if (alarm_enable) { RTSR &= RTSR_ALE; RTAR = alarm_time; - dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR); } else { dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); } @@ -658,19 +660,18 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable sharpsl_pm.machinfo->postsuspend(); - dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR); } static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) { - if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) - { + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) { if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); return 1; } - if(sharpsl_off_charge_battery()) { + if (sharpsl_off_charge_battery()) { dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); return 1; @@ -697,7 +698,7 @@ static int corgi_pxa_pm_enter(suspend_state_t state) corgi_goto_sleep(alarm_time, alarm_status, state); - while (corgi_enter_suspend(alarm_time,alarm_status,state)) + while (corgi_enter_suspend(alarm_time, alarm_status, state)) {} if (sharpsl_pm.machinfo->earlyresume) @@ -732,7 +733,7 @@ static int sharpsl_fatal_check(void) sharpsl_pm.machinfo->discharge1(1); /* Check battery : check inserting battery ? */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -812,7 +813,7 @@ static int sharpsl_off_charge_battery(void) mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); time = RCNR; - while(1) { + while (1) { /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; @@ -835,9 +836,9 @@ static int sharpsl_off_charge_battery(void) mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); time = RCNR; - while(1) { + while (1) { /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) + if (sharpsl_pm.machinfo->charger_wakeup()) return 0; /* Check for timeout */ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { @@ -864,12 +865,12 @@ static int sharpsl_off_charge_battery(void) static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); + return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent); } static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); + return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage); } static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); @@ -943,8 +944,7 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev) } } - if (sharpsl_pm.machinfo->batfull_irq) - { + if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index d98023f5550..4b50f144fa4 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -768,6 +768,10 @@ static void __init common_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + spitz_init_spi(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 724ffb03031..fc5a70c4035 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -103,7 +103,7 @@ static void spitz_presuspend(void) PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); - PKSR = 0xffffffff; // clear + PKSR = 0xffffffff; /* clear */ /* nRESET_OUT Disable */ PSLR |= PSLR_SL_ROD; @@ -149,7 +149,7 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) if (resume_on_alarm && (PEDR & PWER_RTC)) is_resume |= PWER_RTC; - dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume); return is_resume; } @@ -160,7 +160,7 @@ static unsigned long spitz_charger_wakeup(void) unsigned long spitzpm_read_devdata(int type) { - switch(type) { + switch (type) { case SHARPSL_STATUS_ACIN: return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); case SHARPSL_STATUS_LOCK: @@ -199,7 +199,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, #elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, + .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, @@ -208,8 +208,8 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT, .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT, .bat_levels = 40, - .bat_levels_noac = spitz_battery_levels_noac, - .bat_levels_acin = spitz_battery_levels_acin, + .bat_levels_noac = sharpsl_battery_levels_noac, + .bat_levels_acin = sharpsl_battery_levels_acin, .status_high_acin = 188, .status_low_acin = 178, .status_high_noac = 185, @@ -241,7 +241,7 @@ static int __devinit spitzpm_init(void) static void spitzpm_exit(void) { - platform_device_unregister(spitzpm_device); + platform_device_unregister(spitzpm_device); } module_init(spitzpm_init); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 965e38c6baf..9ebe658590f 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -342,8 +342,9 @@ void ssp_free(struct ssp_device *ssp) } EXPORT_SYMBOL(ssp_free); -static int __devinit ssp_probe(struct platform_device *pdev, int type) +static int __devinit ssp_probe(struct platform_device *pdev) { + const struct platform_device_id *id = platform_get_device_id(pdev); struct resource *res; struct ssp_device *ssp; int ret = 0; @@ -413,7 +414,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type) */ ssp->port_id = pdev->id + 1; ssp->use_count = 0; - ssp->type = type; + ssp->type = (int)id->driver_data; mutex_lock(&ssp_lock); list_add(&ssp->node, &ssp_list); @@ -457,75 +458,31 @@ static int __devexit ssp_remove(struct platform_device *pdev) return 0; } -static int __devinit pxa25x_ssp_probe(struct platform_device *pdev) -{ - return ssp_probe(pdev, PXA25x_SSP); -} - -static int __devinit pxa25x_nssp_probe(struct platform_device *pdev) -{ - return ssp_probe(pdev, PXA25x_NSSP); -} - -static int __devinit pxa27x_ssp_probe(struct platform_device *pdev) -{ - return ssp_probe(pdev, PXA27x_SSP); -} - -static struct platform_driver pxa25x_ssp_driver = { - .driver = { - .name = "pxa25x-ssp", - }, - .probe = pxa25x_ssp_probe, - .remove = __devexit_p(ssp_remove), +static const struct platform_device_id ssp_id_table[] = { + { "pxa25x-ssp", PXA25x_SSP }, + { "pxa25x-nssp", PXA25x_NSSP }, + { "pxa27x-ssp", PXA27x_SSP }, + { }, }; -static struct platform_driver pxa25x_nssp_driver = { - .driver = { - .name = "pxa25x-nssp", - }, - .probe = pxa25x_nssp_probe, +static struct platform_driver ssp_driver = { + .probe = ssp_probe, .remove = __devexit_p(ssp_remove), -}; - -static struct platform_driver pxa27x_ssp_driver = { .driver = { - .name = "pxa27x-ssp", + .owner = THIS_MODULE, + .name = "pxa2xx-ssp", }, - .probe = pxa27x_ssp_probe, - .remove = __devexit_p(ssp_remove), + .id_table = ssp_id_table, }; static int __init pxa_ssp_init(void) { - int ret = 0; - - ret = platform_driver_register(&pxa25x_ssp_driver); - if (ret) { - printk(KERN_ERR "failed to register pxa25x_ssp_driver"); - return ret; - } - - ret = platform_driver_register(&pxa25x_nssp_driver); - if (ret) { - printk(KERN_ERR "failed to register pxa25x_nssp_driver"); - return ret; - } - - ret = platform_driver_register(&pxa27x_ssp_driver); - if (ret) { - printk(KERN_ERR "failed to register pxa27x_ssp_driver"); - return ret; - } - - return ret; + return platform_driver_register(&ssp_driver); } static void __exit pxa_ssp_exit(void) { - platform_driver_unregister(&pxa25x_ssp_driver); - platform_driver_unregister(&pxa25x_nssp_driver); - platform_driver_unregister(&pxa27x_ssp_driver); + platform_driver_unregister(&ssp_driver); } arch_initcall(pxa_ssp_init); diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 3b205b69f3f..a98a434f011 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -760,6 +760,10 @@ static void __init stargate2_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* spi chip selects */ gpio_direction_output(37, 0); gpio_direction_output(24, 0); diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index b75353a2ec7..f02dcb5b4e9 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -477,6 +477,10 @@ static void __init tavorevb_init(void) /* initialize MFP configurations */ pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + platform_device_register(&smc91x_device); tavorevb_init_lcd(); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index e81a52673d4..c854c168a45 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -825,6 +825,11 @@ static void __init tosa_init(void) int dummy; pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 3981e0356d1..0aa858ebc57 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -524,6 +524,10 @@ static void __init trizeps4_init(void) ARRAY_SIZE(trizeps4_devices)); } + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + if (0) /* dont know how to determine LCD */ set_pxa_fb_info(&sharp_lcd); else diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index d33c232b686..cf0d71b7797 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -301,15 +301,6 @@ static void __init viper_init_irq(void) set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), viper_irq_handler); set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); - -#ifndef CONFIG_SERIAL_PXA - /* - * 8250 doesn't support IRQ_TYPE being passed as part - * of the plat_serial8250_port structure... - */ - set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING); -#endif } /* Flat Panel */ @@ -539,6 +530,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = VIPER_UARTA_PHYS, .irq = gpio_to_irq(VIPER_UARTA_GPIO), + .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, .iotype = UPIO_MEM, @@ -548,6 +540,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = VIPER_UARTB_PHYS, .irq = gpio_to_irq(VIPER_UARTB_GPIO), + .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, .iotype = UPIO_MEM, @@ -908,6 +901,10 @@ static void __init viper_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* Wake-up serial console */ viper_init_serial_gpio(); diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 3fd79cbb36c..d3b4e3f2e03 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -165,6 +165,11 @@ static void __init xcep_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + pxa_set_hwuart_info(NULL); + /* See Intel XScale Developer's Guide for details */ /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */ MSC1 = (MSC1 & 0xffff) | 0xD5540000; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 09784d3954e..b66e9e2d06e 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -31,7 +31,7 @@ #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa27x_keypad.h> -#include <mach/pxa3xx_nand.h> +#include <plat/pxa3xx_nand.h> #include "devices.h" #include "generic.h" @@ -444,6 +444,10 @@ static inline void zylonite_init_ohci(void) {} static void __init zylonite_init(void) { + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + /* board-processor specific initialization */ zylonite_pxa300_init(); zylonite_pxa320_init(); diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h index 1535540edc8..3fd889200e9 100644 --- a/arch/arm/mach-s3c2400/include/mach/map.h +++ b/arch/arm/mach-s3c2400/include/mach/map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2400/include/mach/map.h * - * Copyright 2003,2007 Simtec Electronics + * Copyright 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 3d4e9da3fa5..dd1fcc7e670 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -81,6 +81,14 @@ config ARCH_H1940 help Say Y here if you are using the HP IPAQ H1940 +config H1940BT + tristate "Control the state of H1940 bluetooth chip" + depends on ARCH_H1940 + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on h1940. + config PM_H1940 bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 2ab5ba4b266..0d468e96e83 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o # Machine support obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o +obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_H1940BT) += h1940-bluetooth.o obj-$(CONFIG_PM_H1940) += pm-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 9a37c87152b..217b102866d 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/bast-irq.c * - * Copyright (c) 2003,2005 Simtec Electronics + * Copyright 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -141,7 +141,7 @@ static __init int bast_irq_init(void) unsigned int i; if (machine_is_bast()) { - printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n"); + printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n"); /* zap all the IRQs */ diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 9d1186877d0..75189df995a 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/cpu-freq.c * - * Copyright (c) 2006,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 5aabf117cbb..b7d1f8d27bc 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -17,6 +17,7 @@ #include <linux/ctype.h> #include <linux/leds.h> #include <linux/gpio.h> +#include <linux/rfkill.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> @@ -24,21 +25,10 @@ #define DRV_NAME "h1940-bt" -#ifdef CONFIG_LEDS_H1940 -DEFINE_LED_TRIGGER(bt_led_trigger); -#endif - -static int state; - /* Bluetooth control */ static void h1940bt_enable(int on) { if (on) { -#ifdef CONFIG_LEDS_H1940 - /* flashing Blue */ - led_trigger_event(bt_led_trigger, LED_HALF); -#endif - /* Power on the chip */ h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ @@ -46,48 +36,31 @@ static void h1940bt_enable(int on) s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); s3c2410_gpio_setpin(S3C2410_GPH(1), 0); - - state = 1; } else { -#ifdef CONFIG_LEDS_H1940 - led_trigger_event(bt_led_trigger, 0); -#endif - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); s3c2410_gpio_setpin(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); - - state = 0; } } -static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf) +static int h1940bt_set_block(void *data, bool blocked) { - return snprintf(buf, PAGE_SIZE, "%d\n", state); + h1940bt_enable(!blocked); + return 0; } -static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - int new_state; - char *endp; - - new_state = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) - return -EINVAL; - - h1940bt_enable(new_state); - - return count; -} -static DEVICE_ATTR(enable, 0644, - h1940bt_show, - h1940bt_store); +static const struct rfkill_ops h1940bt_rfkill_ops = { + .set_block = h1940bt_set_block, +}; static int __init h1940bt_probe(struct platform_device *pdev) { + struct rfkill *rfk; + int ret = 0; + /* Configures BT serial port GPIOs */ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); s3c2410_gpio_pullup(S3C2410_GPH(0), 1); @@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev) s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); s3c2410_gpio_pullup(S3C2410_GPH(3), 1); -#ifdef CONFIG_LEDS_H1940 - led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger); -#endif - /* disable BT by default */ - h1940bt_enable(0); + rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, + &h1940bt_rfkill_ops, NULL); + if (!rfk) { + ret = -ENOMEM; + goto err_rfk_alloc; + } + + rfkill_set_led_trigger_name(rfk, "h1940-bluetooth"); + + ret = rfkill_register(rfk); + if (ret) + goto err_rfkill; + + platform_set_drvdata(pdev, rfk); + + return 0; - return device_create_file(&pdev->dev, &dev_attr_enable); +err_rfkill: + rfkill_destroy(rfk); +err_rfk_alloc: + return ret; } static int h1940bt_remove(struct platform_device *pdev) { -#ifdef CONFIG_LEDS_H1940 - led_trigger_unregister_simple(bt_led_trigger); -#endif + struct rfkill *rfk = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (rfk) { + rfkill_unregister(rfk); + rfkill_destroy(rfk); + } + rfk = NULL; + + h1940bt_enable(0); + return 0; } diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h index 20493b04836..bee2a7a932a 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * BAST - CPLD control constants diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h index 501c202b53c..cac428c42e7 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-irq.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine BAST - IRQ Number definitions diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h index c2c5baf0734..6e7dc9d0cf0 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-map.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-map.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine BAST - Memory map definitions diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h index 61684cb8ce5..4c38b39b741 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 92e2687009e..08ac5f96c01 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C24XX DMA support diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 801dff13858..035a493952d 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h * - * Copyright (c) 2003,2009 Simtec Electronics + * Copyright (c) 2003-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - hardware diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h index 639eff523d4..17380f84842 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/osiris-map.h * - * (c) 2005 Simtec Electronics + * Copyright 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index 2a5d90e957f..9a0d169be13 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-clock.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index f6e8eec879c..ebc85c6dadb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h * - * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ + * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h index 2d36353f57d..4932b87bdf3 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-power.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-power.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index c9432103750..72f756c5e50 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -1,7 +1,6 @@ - /* arch/arm/mach-s3c2410/include/mach/uncompress.h * - * Copyright (c) 2003, 2007 Simtec Electronics + * Copyright (c) 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h index f53f85b4ad8..47add133b8e 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine VR1000 - IRQ Number definitions diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 647c9adb018..4c79ac8a6c3 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/mach-bast.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -61,11 +61,12 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/audio-simtec.h> #include "usb-simtec.h" #include "nor-simtec.h" -#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" /* macros for virtual address mods for the io space entries */ #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) @@ -247,7 +248,7 @@ static int chip0_map[] = { 1 }; static int chip1_map[] = { 2 }; static int chip2_map[] = { 3 }; -static struct mtd_partition bast_default_nand_part[] = { +static struct mtd_partition __initdata bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = { * socket. */ -static struct s3c2410_nand_set bast_nand_sets[] = { +static struct s3c2410_nand_set __initdata bast_nand_sets[] = { [0] = { .name = "SmartMedia", .nr_chips = 1, @@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, BAST_VA_CTRL2); } -static struct s3c2410_platform_nand bast_nand_info = { +static struct s3c2410_platform_nand __initdata bast_nand_info = { .tacls = 30, .twrph0 = 60, .twrph1 = 60, @@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = { .need_io = 1, }; +static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { + .have_mic = 1, + .have_lout = 1, +}; + static void __init bast_map_io(void) { /* initialise the clocks */ @@ -625,7 +631,6 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_device_nand.dev.platform_data = &bast_nand_info; s3c_device_hwmon.dev.platform_data = &bast_hwmon_info; s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); @@ -639,6 +644,7 @@ static void __init bast_init(void) sysdev_register(&bast_pm_sysdev); s3c_i2c0_set_platdata(&bast_i2c_info); + s3c_nand_set_platdata(&bast_nand_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); @@ -647,6 +653,7 @@ static void __init bast_init(void) usb_simtec_init(); nor_simtec_init(); + simtec_audio_add(NULL, true, &bast_audio); s3c_cpufreq_setboard(&bast_cpufreq); } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index d9cd5ddecf4..49053254c98 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -21,6 +21,11 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> +#include <linux/pwm_backlight.h> +#include <video/platform_lcd.h> + +#include <linux/mmc/host.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +37,12 @@ #include <plat/regs-serial.h> #include <mach/regs-lcd.h> -#include <mach/regs-gpio.h> #include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-fns.h> +#include <mach/gpio-nrs.h> + #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> @@ -46,6 +54,7 @@ #include <plat/cpu.h> #include <plat/pll.h> #include <plat/pm.h> +#include <plat/mci.h> static struct map_desc h1940_iodesc[] __initdata = { [0] = { @@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = { .gpdup_mask= 0xffffffff, }; -static struct platform_device s3c_device_leds = { +static struct platform_device h1940_device_leds = { .name = "h1940-leds", .id = -1, }; -static struct platform_device s3c_device_bluetooth = { +static struct platform_device h1940_device_bluetooth = { .name = "h1940-bt", .id = -1, }; +static struct s3c24xx_mci_pdata h1940_mmc_cfg = { + .gpio_detect = S3C2410_GPF(5), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = NULL, + .ocr_avail = MMC_VDD_32_33, +}; + +static int h1940_backlight_init(struct device *dev) +{ + gpio_request(S3C2410_GPB(0), "Backlight"); + + s3c2410_gpio_setpin(S3C2410_GPB(0), 0); + s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + + return 0; +} + +static void h1940_backlight_exit(struct device *dev) +{ + s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/); +} + +static struct platform_pwm_backlight_data backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 50, + /* tcnt = 0x31 */ + .pwm_period_ns = 36296, + .init = h1940_backlight_init, + .exit = h1940_backlight_exit, +}; + +static struct platform_device h1940_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &backlight_data, + }, + .id = -1, +}; + +static void h1940_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + int value; + + if (!power) { + /* set to 3ec */ + s3c2410_gpio_setpin(S3C2410_GPC(0), 0); + /* wait for 3ac */ + do { + value = s3c2410_gpio_getpin(S3C2410_GPC(6)); + } while (value); + /* set to 38c */ + s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + } else { + /* Set to 3ac */ + s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + /* Set to 3ad */ + s3c2410_gpio_setpin(S3C2410_GPC(0), 1); + } +} + +static struct plat_lcd_data h1940_lcd_power_data = { + .set_power = h1940_lcd_power_set, +}; + +static struct platform_device h1940_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_lcd.dev, + .dev.platform_data = &h1940_lcd_power_data, +}; + static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, - &s3c_device_leds, - &s3c_device_bluetooth, + &h1940_device_leds, + &h1940_device_bluetooth, + &s3c_device_sdi, + &s3c_device_rtc, + &s3c_device_timer[0], + &h1940_backlight, + &h1940_lcd_powerdev, }; static void __init h1940_map_io(void) @@ -219,6 +307,8 @@ static void __init h1940_init(void) s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c_i2c0_set_platdata(NULL); + s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; + /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -231,6 +321,11 @@ static void __init h1940_init(void) | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); writel(tmp, S3C2410_UPLLCON); + gpio_request(S3C2410_GPC(0), "LCD power"); + gpio_request(S3C2410_GPC(5), "LCD power"); + gpio_request(S3C2410_GPC(6), "LCD power"); + + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0f6ed61af41..0405712c226 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = { &n35_button_device, }; -static struct s3c2410_platform_i2c n30_i2ccfg = { +static struct s3c2410_platform_i2c __initdata n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, .frequency = 10*1000, @@ -500,8 +500,8 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); - s3c_device_i2c0.dev.platform_data = &n30_i2ccfg; s3c24xx_udc_set_platdata(&n30_udc_cfg); + s3c_i2c0_set_platdata(&n30_i2ccfg); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 2cc9849eb44..ab092bcda39 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = { &qt2410_led, }; -static struct mtd_partition qt2410_nand_part[] = { +static struct mtd_partition __initdata qt2410_nand_part[] = { [0] = { .name = "U-Boot", .size = 0x30000, @@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = { }, }; -static struct s3c2410_nand_set qt2410_nand_sets[] = { +static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = { [0] = { .name = "NAND", .nr_chips = 1, @@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = { * chips and beyond. */ -static struct s3c2410_platform_nand qt2410_nand_info = { +static struct s3c2410_platform_nand __initdata qt2410_nand_info = { .tacls = 20, .twrph0 = 60, .twrph1 = 20, @@ -331,7 +331,7 @@ static void __init qt2410_map_io(void) static void __init qt2410_machine_init(void) { - s3c_device_nand.dev.platform_data = &qt2410_nand_info; + s3c_nand_set_platdata(&qt2410_nand_info); switch (tft_type) { case 'p': /* production */ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 1628cc773a2..0d61fb57717 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/mach-vr1000.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright (c) 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine support for Thorcom VR1000 board. Designed for Thorcom by @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> +#include <plat/audio-simtec.h> #include "usb-simtec.h" #include "nor-simtec.h" @@ -393,6 +394,7 @@ static void __init vr1000_init(void) ARRAY_SIZE(vr1000_i2c_devs)); nor_simtec_init(); + simtec_audio_add(NULL, true, NULL); } MACHINE_START(VR1000, "Thorcom-VR1000") diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index f178c2fd9d8..8338865e11c 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/pll.c * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@arm.linux.org.uk> diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 50e25fc5f8a..6b9d0d83a6f 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/usb-simtec.c * - * Copyright (c) 2004,2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -108,7 +108,7 @@ int usb_simtec_init(void) { int ret; - printk("USB Power Control, (c) 2004 Simtec Electronics\n"); + printk("USB Power Control, Copyright 2004 Simtec Electronics\n"); ret = gpio_request(S3C2410_GPB(4), "USB power control"); if (ret < 0) { diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 8df506eac90..c9fa3fca486 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = { * 0x017d0000-0x02bd0000 : cramfs B * 0x02bd0000-0x03fd0000 : yaffs */ -static struct mtd_partition jive_imageA_nand_part[] = { +static struct mtd_partition __initdata jive_imageA_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ @@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = { }, }; -static struct mtd_partition jive_imageB_nand_part[] = { +static struct mtd_partition __initdata jive_imageB_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ @@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = { }, }; -static struct s3c2410_nand_set jive_nand_sets[] = { +static struct s3c2410_nand_set __initdata jive_nand_sets[] = { [0] = { .name = "flash", .nr_chips = 1, @@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = { }, }; -static struct s3c2410_platform_nand jive_nand_info = { +static struct s3c2410_platform_nand __initdata jive_nand_info = { /* set taken from osiris nand timings, possibly still conservative */ .tacls = 30, .twrph0 = 55, @@ -631,7 +631,8 @@ static void __init jive_machine_init(void) s3c_pm_init(); - s3c_device_nand.dev.platform_data = &jive_nand_info; + /** TODO - check that this is after the cmdline option! */ + s3c_nand_set_platdata(&jive_nand_info); /* initialise the spi */ diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 11e8ad49fc7..a6ba591b26b 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { } }; -static struct mtd_partition vstms_nand_part[] = { +static struct mtd_partition __initdata vstms_nand_part[] = { [0] = { .name = "Boot Agent", .size = 0x7C000, @@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = { }, }; -static struct s3c2410_nand_set vstms_nand_sets[] = { +static struct s3c2410_nand_set __initdata vstms_nand_sets[] = { [0] = { .name = "NAND", .nr_chips = 1, @@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = { * chips and beyond. */ -static struct s3c2410_platform_nand vstms_nand_info = { +static struct s3c2410_platform_nand __initdata vstms_nand_info = { .tacls = 20, .twrph0 = 60, .twrph1 = 20, @@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc, static void __init vstms_map_io(void) { - s3c_device_nand.dev.platform_data = &vstms_nand_info; - s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); @@ -153,6 +151,8 @@ static void __init vstms_map_io(void) static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&vstms_nand_info); + platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); } diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index a8b69d77571..cf10e14b7b4 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -53,6 +53,19 @@ config MACH_OSIRIS Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. +config MACH_OSIRIS_DVS + tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" + depends on MACH_OSIRIS + select TPS65010 + help + Say Y/M here if you want to have dynamic voltage scaling support + on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. + + The DVS driver alters the voltage supplied to the ARM core + depending on the frequency it is running at. The driver itself + does not do any of the frequency alteration, which is left up + to the cpufreq driver. + config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index bfadcf684a2..5f322453188 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o + +# extra machine support + +obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 63c5ab65727..0c049b95c37 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 68f3870991b..62a4c3eba97 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-anubis.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright 2003-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -53,8 +53,9 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/audio-simtec.h> -#define COPYRIGHT ", (c) 2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ @@ -138,7 +139,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -static struct mtd_partition anubis_default_nand_part[] = { +static struct mtd_partition __initdata anubis_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = { } }; -static struct mtd_partition anubis_default_nand_part_large[] = { +static struct mtd_partition __initdata anubis_default_nand_part_large[] = { [0] = { .name = "Boot Agent", .size = SZ_128K, @@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = { * socket. */ -static struct s3c2410_nand_set anubis_nand_sets[] = { +static struct s3c2410_nand_set __initdata anubis_nand_sets[] = { [1] = { .name = "External", .nr_chips = 1, @@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, ANUBIS_VA_CTRL1); } -static struct s3c2410_platform_nand anubis_nand_info = { +static struct s3c2410_platform_nand __initdata anubis_nand_info = { .tacls = 25, .twrph0 = 55, .twrph1 = 40, @@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = { } }; +/* Audio setup */ +static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { + .have_mic = 1, + .have_lout = 1, + .output_cdclk = 1, + .use_mpllin = 1, + .amp_gpio = S3C2410_GPB(2), + .amp_gain[0] = S3C2410_GPD(10), + .amp_gain[1] = S3C2410_GPD(11), +}; + static void __init anubis_map_io(void) { /* initialise the clocks */ @@ -454,8 +466,6 @@ static void __init anubis_map_io(void) s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c_device_nand.dev.platform_data = &anubis_nand_info; - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); @@ -476,6 +486,9 @@ static void __init anubis_map_io(void) static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&anubis_nand_info); + simtec_audio_add(NULL, false, &anubis_audio); + platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); i2c_register_board_info(0, anubis_i2c_devs, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index dfc7010935d..aa69290e04c 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { /* NAND Flash on AT2440EVB board */ -static struct mtd_partition at2440evb_default_nand_part[] = { +static struct mtd_partition __initdata at2440evb_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_256K, @@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = { }, }; -static struct s3c2410_nand_set at2440evb_nand_sets[] = { +static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { [0] = { .name = "nand", .nr_chips = 1, @@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = { }, }; -static struct s3c2410_platform_nand at2440evb_nand_info = { +static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { .tacls = 25, .twrph0 = 55, .twrph1 = 40, @@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { - s3c_device_nand.dev.platform_data = &at2440evb_nand_info; - s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata; s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); @@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void) static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); + s3c_nand_set_platdata(&at2440evb_nand_info); s3c_i2c0_set_platdata(NULL); platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 1c3382fefdd..547d4fc9913 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -532,7 +532,6 @@ static void __init mini2440_map_io(void) s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); - s3c_device_nand.dev.platform_data = &mini2440_nand_info; s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg; } @@ -677,8 +676,11 @@ static void __init mini2440_init(void) printk("\n"); s3c24xx_fb_set_platdata(&mini2440_fb_info); } + s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c_nand_set_platdata(&mini2440_nand_info); s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, mini2440_i2c_devs, ARRAY_SIZE(mini2440_i2c_devs)); diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c new file mode 100644 index 00000000000..ad2792dfbee --- /dev/null +++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c @@ -0,0 +1,194 @@ +/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Simtec Osiris Dynamic Voltage Scaling support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/cpufreq.h> +#include <linux/gpio.h> + +#include <linux/i2c/tps65010.h> + +#include <plat/cpu-freq.h> + +#define OSIRIS_GPIO_DVS S3C2410_GPB(5) + +static bool dvs_en; + +static void osiris_dvs_tps_setdvs(bool on) +{ + unsigned vregs1 = 0, vdcdc2 = 0; + + if (!on) { + vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; + vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ + } + + dvs_en = on; + vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; + vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; + + tps65010_config_vregs1(vregs1); + tps65010_config_vdcdc2(vdcdc2); +} + +static bool is_dvs(struct s3c_freq *f) +{ + /* at the moment, we assume ARMCLK = HCLK => DVS */ + return f->armclk == f->hclk; +} + +/* keep track of current state */ +static bool cur_dvs = false; + +static int osiris_dvs_notify(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *cf = data; + struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); + bool old_dvs = is_dvs(&freqs->old); + bool new_dvs = is_dvs(&freqs->new); + int ret = 0; + + if (!dvs_en) + return 0; + + printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, + freqs->old.armclk, freqs->old.hclk, + freqs->new.armclk, freqs->new.hclk); + + switch (val) { + case CPUFREQ_PRECHANGE: + if (old_dvs & !new_dvs || + cur_dvs & !new_dvs) { + pr_debug("%s: exiting dvs\n", __func__); + cur_dvs = false; + gpio_set_value(OSIRIS_GPIO_DVS, 1); + } + break; + case CPUFREQ_POSTCHANGE: + if (!old_dvs & new_dvs || + !cur_dvs & new_dvs) { + pr_debug("entering dvs\n"); + cur_dvs = true; + gpio_set_value(OSIRIS_GPIO_DVS, 0); + } + break; + } + + return ret; +} + +static struct notifier_block osiris_dvs_nb = { + .notifier_call = osiris_dvs_notify, +}; + +static int __devinit osiris_dvs_probe(struct platform_device *pdev) +{ + int ret; + + dev_info(&pdev->dev, "initialising\n"); + + ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); + if (ret) { + dev_err(&pdev->dev, "cannot claim gpio\n"); + goto err_nogpio; + } + + /* start with dvs disabled */ + gpio_direction_output(OSIRIS_GPIO_DVS, 1); + + ret = cpufreq_register_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret) { + dev_err(&pdev->dev, "failed to register with cpufreq\n"); + goto err_nofreq; + } + + osiris_dvs_tps_setdvs(true); + + return 0; + +err_nofreq: + gpio_free(OSIRIS_GPIO_DVS); + +err_nogpio: + return ret; +} + +static int __devexit osiris_dvs_remove(struct platform_device *pdev) +{ + dev_info(&pdev->dev, "exiting\n"); + + /* disable any current dvs */ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + + cpufreq_unregister_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + + gpio_free(OSIRIS_GPIO_DVS); + + return 0; +} + +/* the CONFIG_PM block is so small, it isn't worth actaully compiling it + * out if the configuration isn't set. */ + +static int osiris_dvs_suspend(struct device *dev) +{ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + cur_dvs = false; + + return 0; +} + +static int osiris_dvs_resume(struct device *dev) +{ + osiris_dvs_tps_setdvs(true); + return 0; +} + +static const struct dev_pm_ops osiris_dvs_pm = { + .suspend = osiris_dvs_suspend, + .resume = osiris_dvs_resume, +}; + +static struct platform_driver osiris_dvs_driver = { + .probe = osiris_dvs_probe, + .remove = __devexit_p(osiris_dvs_remove), + .driver = { + .name = "osiris-dvs", + .owner = THIS_MODULE, + .pm = &osiris_dvs_pm, + }, +}; + +static int __init osiris_dvs_init(void) +{ + return platform_driver_register(&osiris_dvs_driver); +} + +static void __exit osiris_dvs_exit(void) +{ + platform_driver_unregister(&osiris_dvs_driver); +} + +module_init(osiris_dvs_init); +module_exit(osiris_dvs_exit); + +MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:osiris-dvs"); diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 2105a41281a..015dfb2a80d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-osiris.c * - * Copyright (c) 2005,2008 Simtec Electronics + * Copyright (c) 2005-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -23,6 +23,8 @@ #include <linux/i2c.h> #include <linux/io.h> +#include <linux/i2c/tps65010.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -148,7 +150,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -static struct mtd_partition osiris_default_nand_part[] = { +static struct mtd_partition __initdata osiris_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = { } }; -static struct mtd_partition osiris_default_nand_part_large[] = { +static struct mtd_partition __initdata osiris_default_nand_part_large[] = { [0] = { .name = "Boot Agent", .size = SZ_128K, @@ -201,7 +203,7 @@ static struct mtd_partition osiris_default_nand_part_large[] = { * socket. */ -static struct s3c2410_nand_set osiris_nand_sets[] = { +static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { [1] = { .name = "External", .nr_chips = 1, @@ -243,7 +245,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, OSIRIS_VA_CTRL0); } -static struct s3c2410_platform_nand osiris_nand_info = { +static struct s3c2410_platform_nand __initdata osiris_nand_info = { .tacls = 25, .twrph0 = 60, .twrph1 = 60, @@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = { .cls = &osiris_pm_sysclass, }; +/* Link for DVS driver to TPS65011 */ + +static void osiris_tps_release(struct device *dev) +{ + /* static device, do not need to release anything */ +} + +static struct platform_device osiris_tps_device = { + .name = "osiris-dvs", + .id = -1, + .dev.release = osiris_tps_release, +}; + +static int osiris_tps_setup(struct i2c_client *client, void *context) +{ + osiris_tps_device.dev.parent = &client->dev; + return platform_device_register(&osiris_tps_device); +} + +static int osiris_tps_remove(struct i2c_client *client, void *context) +{ + platform_device_unregister(&osiris_tps_device); + return 0; +} + +static struct tps65010_board osiris_tps_board = { + .base = -1, /* GPIO can go anywhere at the moment */ + .setup = osiris_tps_setup, + .teardown = osiris_tps_remove, +}; + /* I2C devices fitted. */ static struct i2c_board_info osiris_i2c_devs[] __initdata = { { I2C_BOARD_INFO("tps65011", 0x48), .irq = IRQ_EINT20, + .platform_data = &osiris_tps_board, }, }; @@ -377,8 +411,6 @@ static void __init osiris_map_io(void) s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c_device_nand.dev.platform_data = &osiris_nand_info; - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); @@ -408,6 +440,7 @@ static void __init osiris_init(void) sysdev_register(&osiris_pm_sysdev); s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&osiris_nand_info); s3c_cpufreq_setboard(&osiris_cpufreq); diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index bc8d8d1ebd1..a952a13afb1 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-rx3715.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.handhelds.org/projects/rx3715.html @@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = { .gpdup_mask = 0xffffffff, }; -static struct mtd_partition rx3715_nand_part[] = { +static struct mtd_partition __initdata rx3715_nand_part[] = { [0] = { .name = "Whole Flash", .offset = 0, @@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = { } }; -static struct s3c2410_nand_set rx3715_nand_sets[] = { +static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = { [0] = { .name = "Internal", .nr_chips = 1, @@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = { }, }; -static struct s3c2410_platform_nand rx3715_nand_info = { +static struct s3c2410_platform_nand __initdata rx3715_nand_info = { .tacls = 25, .twrph0 = 50, .twrph1 = 15, @@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { - s3c_device_nand.dev.platform_data = &rx3715_nand_info; - s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); @@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void) #endif s3c_pm_init(); + s3c_nand_set_platdata(&rx3715_nand_info); s3c24xx_fb_set_platdata(&rx3715_fb_info); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); } diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index db6eafbd4d9..ec13e748ccc 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c * - * Copyright (c) 2004,2005 Simtec Electronics + * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.fluff.org/ben/smdk2440/ diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index 0fb385bd9cd..f76d6ff4aeb 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -423,7 +423,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = { }, }; -static struct s3c2410_nand_set gta02_nand_sets[] = { +static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { [0] = { /* * This name is also hard-coded in the boot loaders, so @@ -442,7 +442,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { * data sheet (K5D2G13ACM-D075 MCP Memory). */ -static struct s3c2410_platform_nand gta02_nand_info = { +static struct s3c2410_platform_nand __initdata gta02_nand_info = { .tacls = 0, .twrph0 = 25, .twrph1 = 15, @@ -621,9 +621,9 @@ static void __init gta02_machine_init(void) #endif s3c_device_usb.dev.platform_data = >a02_usb_info; - s3c_device_nand.dev.platform_data = >a02_nand_info; s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h index 79e4d93ea2b..d88c8b24fe3 100644 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ b/arch/arm/mach-s3c24a0/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c24a0/include/mach/map.h * - * Copyright 2003,2007 Simtec Electronics + * Copyright 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h index af2abd756c3..be0af518b48 100644 --- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index fc8b223bad4..f3b48f841d8 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -64,6 +64,9 @@ #define S3C64XX_PA_USBHOST (0x74300000) +#define S3C64XX_PA_USB_HSPHY (0x7C100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + /* place VICs close together */ #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) @@ -79,5 +82,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h index 47019795ce0..f56611526c6 100644 --- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h +++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h @@ -1,195 +1,30 @@ -/* arch/arm/mach-s3c6400/include/mach/regs-fb.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - new-style framebuffer register definitions + * Copyright 2009 Samsung Electronics Co. * - * This is the register set for the new style framebuffer interface - * found from the S3C2443 onwards and specifically the S3C64XX series - * S3C6400 and S3C6410. + * Pawel Osciak <p.osciak@samsung.com> + * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk> * - * The file contains the cpu specific items which change between whichever - * architecture is selected. See <plat/regs-fb.h> for the core definitions - * that are the same. + * Framebuffer register definitions for Samsung S3C64xx. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/* include the core definitions here, in case we really do need to - * override them at a later date. -*/ - -#include <plat/regs-fb.h> - -#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ -#define VIDCON1_FSTATUS_EVEN (1 << 15) - -/* Video timing controls */ -#define VIDTCON0 (0x10) -#define VIDTCON1 (0x14) -#define VIDTCON2 (0x18) - -/* Window position controls */ - -#define WINCON(_win) (0x20 + ((_win) * 4)) - -/* OSD1 and OSD4 do not have register D */ - -#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) -#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) -#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) -#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) - -/* Video buffer addresses */ - -#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) -#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) -#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) -#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) -#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) - -#define VIDINTCON0 (0x130) - -#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) - -/* WINCONx */ - -#define WINCONx_CSCWIDTH_MASK (0x3 << 26) -#define WINCONx_CSCWIDTH_SHIFT (26) -#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) -#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) - -#define WINCONx_ENLOCAL (1 << 22) -#define WINCONx_BUFSTATUS (1 << 21) -#define WINCONx_BUFSEL (1 << 20) -#define WINCONx_BUFAUTOEN (1 << 19) -#define WINCONx_YCbCr (1 << 13) - -#define WINCON1_LOCALSEL_CAMIF (1 << 23) - -#define WINCON2_LOCALSEL_CAMIF (1 << 23) -#define WINCON2_BLD_PIX (1 << 6) - -#define WINCON2_ALPHA_SEL (1 << 1) -#define WINCON2_BPPMODE_MASK (0xf << 2) -#define WINCON2_BPPMODE_SHIFT (2) -#define WINCON2_BPPMODE_1BPP (0x0 << 2) -#define WINCON2_BPPMODE_2BPP (0x1 << 2) -#define WINCON2_BPPMODE_4BPP (0x2 << 2) -#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) -#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) -#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) -#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) -#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) -#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) -#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) -#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) -#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) -#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) -#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) - -#define WINCON3_BLD_PIX (1 << 6) - -#define WINCON3_ALPHA_SEL (1 << 1) -#define WINCON3_BPPMODE_MASK (0xf << 2) -#define WINCON3_BPPMODE_SHIFT (2) -#define WINCON3_BPPMODE_1BPP (0x0 << 2) -#define WINCON3_BPPMODE_2BPP (0x1 << 2) -#define WINCON3_BPPMODE_4BPP (0x2 << 2) -#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) -#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) -#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) -#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) -#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) -#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) -#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) -#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) -#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) -#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) - -#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) -#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) -#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) - -#define DITHMODE (0x170) -#define WINxMAP(_win) (0x180 + ((_win) * 4)) - - -#define DITHMODE_R_POS_MASK (0x3 << 5) -#define DITHMODE_R_POS_SHIFT (5) -#define DITHMODE_R_POS_8BIT (0x0 << 5) -#define DITHMODE_R_POS_6BIT (0x1 << 5) -#define DITHMODE_R_POS_5BIT (0x2 << 5) - -#define DITHMODE_G_POS_MASK (0x3 << 3) -#define DITHMODE_G_POS_SHIFT (3) -#define DITHMODE_G_POS_8BIT (0x0 << 3) -#define DITHMODE_G_POS_6BIT (0x1 << 3) -#define DITHMODE_G_POS_5BIT (0x2 << 3) - -#define DITHMODE_B_POS_MASK (0x3 << 1) -#define DITHMODE_B_POS_SHIFT (1) -#define DITHMODE_B_POS_8BIT (0x0 << 1) -#define DITHMODE_B_POS_6BIT (0x1 << 1) -#define DITHMODE_B_POS_5BIT (0x2 << 1) +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ -#define DITHMODE_DITH_EN (1 << 0) - -#define WPALCON (0x1A0) - -#define WPALCON_W4PAL_16BPP_A555 (1 << 8) -#define WPALCON_W3PAL_16BPP_A555 (1 << 7) -#define WPALCON_W2PAL_16BPP_A555 (1 << 6) +#include <plat/regs-fb-v4.h> /* Palette registers */ - #define WIN2_PAL(_entry) (0x300 + ((_entry) * 2)) #define WIN3_PAL(_entry) (0x320 + ((_entry) * 2)) #define WIN4_PAL(_entry) (0x340 + ((_entry) * 2)) #define WIN0_PAL(_entry) (0x400 + ((_entry) * 4)) #define WIN1_PAL(_entry) (0x800 + ((_entry) * 4)) -/* system specific implementation code for palette sizes, and other - * information that changes depending on which architecture is being - * compiled. -*/ - -/* return true if window _win has OSD register D */ -#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) - -static inline unsigned int s3c_fb_win_pal_size(unsigned int win) -{ - if (win < 2) - return 256; - if (win < 4) - return 16; - if (win == 4) - return 4; - - BUG(); /* shouldn't get here */ -} - -static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) -{ - /* all windows can do 1/2 bpp */ - - if ((bpp == 25 || bpp == 19) && win == 0) - return 0; /* win 0 does not have 19 or 25bpp modes */ - - if (bpp == 4 && win == 4) - return 0; - - if (bpp == 8 && (win >= 3)) - return 0; /* win 3/4 cannot do 8bpp in any mode */ - - return 1; -} - static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) { switch (window) { @@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) BUG(); } -static inline int s3c_fb_pal_is16(unsigned int window) -{ - return window > 1; -} - -struct s3c_fb_palette { - struct fb_bitfield r; - struct fb_bitfield g; - struct fb_bitfield b; - struct fb_bitfield a; -}; - -static inline void s3c_fb_init_palette(unsigned int window, - struct s3c_fb_palette *palette) -{ - if (window < 2) { - /* Windows 0/1 are 8/8/8 or A/8/8/8 */ - palette->r.offset = 16; - palette->r.length = 8; - palette->g.offset = 8; - palette->g.length = 8; - palette->b.offset = 0; - palette->b.length = 8; - } else { - /* currently we assume RGB 5/6/5 */ - palette->r.offset = 11; - palette->r.length = 5; - palette->g.offset = 5; - palette->g.length = 6; - palette->b.offset = 0; - palette->b.length = 5; - } -} - -/* Notes on per-window bpp settings - * - * Value Win0 Win1 Win2 Win3 Win 4 - * 0000 1(P) 1(P) 1(P) 1(P) 1(P) - * 0001 2(P) 2(P) 2(P) 2(P) 2(P) - * 0010 4(P) 4(P) 4(P) 4(P) -none- - * 0011 8(P) 8(P) -none- -none- -none- - * 0100 -none- 8(A232) 8(A232) -none- -none- - * 0101 16(565) 16(565) 16(565) 16(565) 16(565) - * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) - * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) - * 1000 18(666) 18(666) 18(666) 18(666) 18(666) - * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) - * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) - * 1011 24(888) 24(888) 24(888) 24(888) 24(888) - * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) - * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) - * 1110 -none- -none- -none- -none- -none- - * 1111 -none- -none- -none- -none- -none- -*/ +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c index b42bdd0f213..d876ee50367 100644 --- a/arch/arm/mach-s3c6400/s3c6400.c +++ b/arch/arm/mach-s3c6400/s3c6400.c @@ -45,6 +45,7 @@ void __init s3c6400_map_io(void) s3c6400_default_sdhci0(); s3c6400_default_sdhci1(); + s3c6400_default_sdhci2(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c index 9b67c663d9d..522c0869195 100644 --- a/arch/arm/mach-s3c6410/cpu.c +++ b/arch/arm/mach-s3c6410/cpu.c @@ -58,6 +58,7 @@ void __init s3c6410_map_io(void) /* initialise device information early */ s3c6410_default_sdhci0(); s3c6410_default_sdhci1(); + s3c6410_default_sdhci2(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c index c5741056193..cdd4b537855 100644 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ b/arch/arm/mach-s3c6410/mach-hmt.c @@ -250,7 +250,7 @@ static void __init hmt_machine_init(void) { s3c_i2c0_set_platdata(NULL); s3c_fb_set_platdata(&hmt_lcd_pdata); - s3c_device_nand.dev.platform_data = &hmt_nand_info; + s3c_nand_set_platdata(&hmt_nand_info); gpio_request(S3C64XX_GPC(7), "usb power"); gpio_direction_output(S3C64XX_GPC(7), 0); diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 9f1a2146262..480d297c1de 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> #ifdef CONFIG_SMDK6410_WM1190_EV1 #include <linux/mfd/wm8350/core.h> @@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = { }, }; +#ifdef CONFIG_REGULATOR +static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { + { + /* WM8580 */ + .supply = "PVDD", + .dev_name = "0-001b", + }, + { + /* WM8580 */ + .supply = "AVDD", + .dev_name = "0-001b", + }, +}; + +static struct regulator_init_data smdk6410_b_pwr_5v_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers), + .consumer_supplies = smdk6410_b_pwr_5v_consumers, +}; + +static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { + .supply_name = "B_PWR_5V", + .microvolts = 5000000, + .init_data = &smdk6410_b_pwr_5v_data, +}; + +static struct platform_device smdk6410_b_pwr_5v = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &smdk6410_b_pwr_5v_pdata, + }, +}; +#endif + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_usb, &s3c_device_usb_hsotg, + +#ifdef CONFIG_REGULATOR + &smdk6410_b_pwr_5v, +#endif &smdk6410_lcd_powerdev, &smdk6410_smsc911x, @@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = { }; /* USB, EXT, PCM, ADC/DAC, USB, MMC */ +static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { + { + /* WM8580 */ + .supply = "DVDD", + .dev_name = "0-001b", + }, +}; + static struct regulator_init_data wm8350_dcdc4_data = { .constraints = { .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", @@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = { .max_uV = 3000000, .always_on = 1, }, + .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers), + .consumer_supplies = wm8350_dcdc4_consumers, }; /* ARM core */ diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b1a4ba50441..0dd2b8c6eab 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -14,9 +14,23 @@ config CPU_S5PC100 help Enable S5PC100 CPU support +config S5PC100_SETUP_SDHCI + bool + select S5PC1XX_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PC100 based SDHCI systems + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 + select S3C_DEV_FB + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S5PC1XX_SETUP_I2C0 select S5PC1XX_SETUP_I2C1 + select S5PC1XX_SETUP_FB_24BPP + select S5PC100_SETUP_SDHCI help Machine support for the Samsung SMDKC100 diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index afc89b381d7..809ff10f768 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -13,5 +13,9 @@ obj- := obj-$(CONFIG_CPU_S5PC100) += cpu.o +# Helper and device support + +obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o + # machine support obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 0e718890da3..d79e7574a85 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -22,6 +22,8 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <asm/proc-fns.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -32,6 +34,7 @@ #include <plat/cpu-freq.h> #include <plat/regs-serial.h> +#include <plat/regs-power.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -45,6 +48,23 @@ static struct map_desc s5pc100_iodesc[] __initdata = { }; +static void s5pc100_idle(void) +{ + unsigned long tmp; + + tmp = __raw_readl(S5PC100_PWR_CFG); + tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE; + tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK; + tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE; + __raw_writel(tmp, S5PC100_PWR_CFG); + + tmp = __raw_readl(S5PC100_OTHERS); + tmp |= S5PC100_PMU_INT_DISABLE; + __raw_writel(tmp, S5PC100_OTHERS); + + cpu_do_idle(); +} + /* s5pc100_map_io * * register the standard cpu IO areas @@ -55,6 +75,13 @@ void __init s5pc100_map_io(void) iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); /* initialise device information early */ + s5pc100_default_sdhci0(); + s5pc100_default_sdhci1(); + s5pc100_default_sdhci2(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); } void __init s5pc100_init_clocks(int xtal) @@ -93,5 +120,7 @@ int __init s5pc100_init(void) { printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); + s5pc1xx_idle = s5pc100_idle; + return sysdev_register(&s5pc100_sysdev); } diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index c74fc93d7d1..2c4cbe8ee6b 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -18,40 +18,45 @@ #define gpio_to_irq __gpio_to_irq /* GPIO bank sizes */ -#define S5PC1XX_GPIO_A0_NR (8) -#define S5PC1XX_GPIO_A1_NR (5) -#define S5PC1XX_GPIO_B_NR (8) -#define S5PC1XX_GPIO_C_NR (5) -#define S5PC1XX_GPIO_D_NR (7) -#define S5PC1XX_GPIO_E0_NR (8) -#define S5PC1XX_GPIO_E1_NR (6) -#define S5PC1XX_GPIO_F0_NR (8) -#define S5PC1XX_GPIO_F1_NR (8) -#define S5PC1XX_GPIO_F2_NR (8) -#define S5PC1XX_GPIO_F3_NR (4) -#define S5PC1XX_GPIO_G0_NR (8) -#define S5PC1XX_GPIO_G1_NR (3) -#define S5PC1XX_GPIO_G2_NR (7) -#define S5PC1XX_GPIO_G3_NR (7) -#define S5PC1XX_GPIO_H0_NR (8) -#define S5PC1XX_GPIO_H1_NR (8) -#define S5PC1XX_GPIO_H2_NR (8) -#define S5PC1XX_GPIO_H3_NR (8) -#define S5PC1XX_GPIO_I_NR (8) -#define S5PC1XX_GPIO_J0_NR (8) -#define S5PC1XX_GPIO_J1_NR (5) -#define S5PC1XX_GPIO_J2_NR (8) -#define S5PC1XX_GPIO_J3_NR (8) -#define S5PC1XX_GPIO_J4_NR (4) -#define S5PC1XX_GPIO_K0_NR (8) -#define S5PC1XX_GPIO_K1_NR (6) -#define S5PC1XX_GPIO_K2_NR (8) -#define S5PC1XX_GPIO_K3_NR (8) -#define S5PC1XX_GPIO_MP00_NR (8) -#define S5PC1XX_GPIO_MP01_NR (8) -#define S5PC1XX_GPIO_MP02_NR (8) -#define S5PC1XX_GPIO_MP03_NR (8) -#define S5PC1XX_GPIO_MP04_NR (5) +#define S5PC100_GPIO_A0_NR (8) +#define S5PC100_GPIO_A1_NR (5) +#define S5PC100_GPIO_B_NR (8) +#define S5PC100_GPIO_C_NR (5) +#define S5PC100_GPIO_D_NR (7) +#define S5PC100_GPIO_E0_NR (8) +#define S5PC100_GPIO_E1_NR (6) +#define S5PC100_GPIO_F0_NR (8) +#define S5PC100_GPIO_F1_NR (8) +#define S5PC100_GPIO_F2_NR (8) +#define S5PC100_GPIO_F3_NR (4) +#define S5PC100_GPIO_G0_NR (8) +#define S5PC100_GPIO_G1_NR (3) +#define S5PC100_GPIO_G2_NR (7) +#define S5PC100_GPIO_G3_NR (7) +#define S5PC100_GPIO_H0_NR (8) +#define S5PC100_GPIO_H1_NR (8) +#define S5PC100_GPIO_H2_NR (8) +#define S5PC100_GPIO_H3_NR (8) +#define S5PC100_GPIO_I_NR (8) +#define S5PC100_GPIO_J0_NR (8) +#define S5PC100_GPIO_J1_NR (5) +#define S5PC100_GPIO_J2_NR (8) +#define S5PC100_GPIO_J3_NR (8) +#define S5PC100_GPIO_J4_NR (4) +#define S5PC100_GPIO_K0_NR (8) +#define S5PC100_GPIO_K1_NR (6) +#define S5PC100_GPIO_K2_NR (8) +#define S5PC100_GPIO_K3_NR (8) +#define S5PC100_GPIO_L0_NR (8) +#define S5PC100_GPIO_L1_NR (8) +#define S5PC100_GPIO_L2_NR (8) +#define S5PC100_GPIO_L3_NR (8) +#define S5PC100_GPIO_L4_NR (8) +#define S5PC100_GPIO_MP00_NR (8) +#define S5PC100_GPIO_MP01_NR (8) +#define S5PC100_GPIO_MP02_NR (8) +#define S5PC100_GPIO_MP03_NR (8) +#define S5PC100_GPIO_MP04_NR (5) /* GPIO bank numbes */ @@ -64,83 +69,94 @@ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) enum s3c_gpio_number { - S5PC1XX_GPIO_A0_START = 0, - S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0), - S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1), - S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B), - S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C), - S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D), - S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0), - S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1), - S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0), - S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1), - S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2), - S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3), - S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0), - S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1), - S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2), - S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3), - S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0), - S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1), - S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2), - S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3), - S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I), - S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0), - S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1), - S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2), - S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3), - S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4), - S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0), - S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1), - S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2), - S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3), - S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00), - S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01), - S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02), - S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03), + S5PC100_GPIO_A0_START = 0, + S5PC100_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0), + S5PC100_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1), + S5PC100_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B), + S5PC100_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C), + S5PC100_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D), + S5PC100_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0), + S5PC100_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1), + S5PC100_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0), + S5PC100_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1), + S5PC100_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2), + S5PC100_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3), + S5PC100_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0), + S5PC100_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1), + S5PC100_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2), + S5PC100_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3), + S5PC100_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0), + S5PC100_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1), + S5PC100_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2), + S5PC100_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3), + S5PC100_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I), + S5PC100_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0), + S5PC100_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1), + S5PC100_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2), + S5PC100_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3), + S5PC100_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4), + S5PC100_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0), + S5PC100_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1), + S5PC100_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2), + S5PC100_GPIO_L0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3), + S5PC100_GPIO_L1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0), + S5PC100_GPIO_L2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1), + S5PC100_GPIO_L3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2), + S5PC100_GPIO_L4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3), + S5PC100_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4), + S5PC100_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00), + S5PC100_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01), + S5PC100_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02), + S5PC100_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03), + S5PC100_GPIO_END = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04), }; -/* S5PC1XX GPIO number definitions. */ -#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr)) -#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr)) -#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr)) -#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr)) -#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr)) -#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr)) -#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr)) -#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr)) -#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr)) -#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr)) -#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr)) -#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr)) -#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr)) -#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr)) -#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr)) -#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr)) -#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr)) -#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr)) -#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr)) -#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr)) -#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr)) -#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr)) -#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr)) -#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr)) -#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr)) -#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr)) -#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr)) -#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr)) -#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr)) -#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr)) -#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr)) -#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr)) -#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr)) -#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr)) +/* S5PC100 GPIO number definitions. */ +#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr)) +#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr)) +#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr)) +#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr)) +#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr)) +#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr)) +#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr)) +#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr)) +#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr)) +#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr)) +#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr)) +#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr)) +#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr)) +#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr)) +#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr)) +#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr)) +#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr)) +#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr)) +#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr)) +#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr)) +#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr)) +#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr)) +#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr)) +#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr)) +#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr)) +#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr)) +#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr)) +#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr)) +#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr)) +#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr)) +#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr)) +#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr)) +#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr)) +#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr)) +#define S5PC100_MP00(_nr) (S5PC100_GPIO_MP00_START + (_nr)) +#define S5PC100_MP01(_nr) (S5PC100_GPIO_MP01_START + (_nr)) +#define S5PC100_MP02(_nr) (S5PC100_GPIO_MP02_START + (_nr)) +#define S5PC100_MP03(_nr) (S5PC100_GPIO_MP03_START + (_nr)) +#define S5PC100_MP04(_nr) (S5PC100_GPIO_MP04_START + (_nr)) +#define S5PC100_MP05(_nr) (S5PC100_GPIO_MP05_START + (_nr)) -/* the end of the S5PC1XX specific gpios */ -#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) -#define S3C_GPIO_END S5PC1XX_GPIO_END +/* It used the end of the S5PC1XX gpios */ +#define S3C_GPIO_END S5PC100_GPIO_END /* define the number of gpios we need to the one after the MP04() range */ -#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) +#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 622720dba28..b53fa48a52c 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -11,4 +11,9 @@ #include <plat/irqs.h> +/* LCD */ +#define IRQ_LCD_FIFO IRQ_LCD0 +#define IRQ_LCD_VSYNC IRQ_LCD1 +#define IRQ_LCD_SYSTEM IRQ_LCD2 + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 9e9f39130b2..4681ebe8bef 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -17,6 +17,19 @@ #include <plat/map-base.h> +/* + * map-base.h has already defined virtual memory address + * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) + * S3C_VA_SYS S3C_ADDR(0x00100000) system control + * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) + * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block + * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog + * S3C_VA_UART S3C_ADDR(0x01000000) UART + * + * S5PC100 specific virtual memory address can be defined here + * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO + * + */ /* Chip ID */ #define S5PC100_PA_CHIPID (0xE0000000) @@ -24,13 +37,20 @@ #define S5PC1XX_VA_CHIPID S3C_VA_SYS /* System */ -#define S5PC100_PA_SYS (0xE0100000) -#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0) -#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000) +#define S5PC100_PA_CLK (0xE0100000) +#define S5PC100_PA_CLK_OTHER (0xE0200000) +#define S5PC100_PA_PWR (0xE0108000) #define S5PC1XX_PA_CLK S5PC100_PA_CLK #define S5PC1XX_PA_PWR S5PC100_PA_PWR +#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER #define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) #define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) +#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000) + +/* GPIO */ +#define S5PC100_PA_GPIO (0xE0300000) +#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO +#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ #define S5PC100_PA_VIC (0xE4000000) @@ -40,23 +60,64 @@ #define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +/* DMA */ +#define S5PC100_PA_MDMA (0xE8100000) +#define S5PC100_PA_PDMA0 (0xE9000000) +#define S5PC100_PA_PDMA1 (0xE9200000) + /* Timer */ #define S5PC100_PA_TIMER (0xEA000000) #define S5PC1XX_PA_TIMER S5PC100_PA_TIMER #define S5PC1XX_VA_TIMER S3C_VA_TIMER +/* RTC */ +#define S5PC100_PA_RTC (0xEA300000) + /* UART */ #define S5PC100_PA_UART (0xEC000000) #define S5PC1XX_PA_UART S5PC100_PA_UART #define S5PC1XX_VA_UART S3C_VA_UART -/* IIC */ -#define S5PC100_PA_IIC (0xEC100000) +/* I2C */ +#define S5PC100_PA_I2C (0xEC100000) +#define S5PC100_PA_I2C1 (0xEC200000) + +/* USB HS OTG */ +#define S5PC100_PA_USB_HSOTG (0xED200000) +#define S5PC100_PA_USB_HSPHY (0xED300000) + +/* SD/MMC */ +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2) + +/* LCD */ +#define S5PC100_PA_FB (0xEE000000) + +/* Multimedia */ +#define S5PC100_PA_G2D (0xEE800000) +#define S5PC100_PA_JPEG (0xEE500000) +#define S5PC100_PA_ROTATOR (0xEE100000) +#define S5PC100_PA_G3D (0xEF000000) + +/* I2S */ +#define S5PC100_PA_I2S0 (0xF2000000) +#define S5PC100_PA_I2S1 (0xF2100000) +#define S5PC100_PA_I2S2 (0xF2200000) + +/* KEYPAD */ +#define S5PC100_PA_KEYPAD (0xF3100000) + +/* ADC & TouchScreen */ +#define S5PC100_PA_TSADC (0xF3000000) /* ETC */ #define S5PC100_PA_SDRAM (0x20000000) +#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM /* compatibility defines. */ +#define S3C_PA_RTC S5PC100_PA_RTC #define S3C_PA_UART S5PC100_PA_UART #define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) #define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) @@ -67,9 +128,23 @@ #define S3C_VA_UART2 (S3C_VA_UART + 0x800) #define S3C_VA_UART3 (S3C_VA_UART + 0xC00) #define S3C_UART_OFFSET 0x400 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_G2D S5PC100_PA_G2D +#define S3C_PA_G3D S5PC100_PA_G3D +#define S3C_PA_JPEG S5PC100_PA_JPEG +#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) #define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) -#define S3C_PA_IIC S5PC100_PA_IIC +#define S3C_PA_IIC S5PC100_PA_I2C +#define S3C_PA_IIC1 S5PC100_PA_I2C1 +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0 +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1 +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_TSADC S5PC100_PA_TSADC #endif /* __ASM_ARCH_C100_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h new file mode 100644 index 00000000000..1732cd28c76 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -0,0 +1,139 @@ +/* arch/arm/mach-s5pc100/include/mach/regs-fb.h + * + * Copyright 2009 Samsung Electronics Co. + * Pawel Osciak <p.osciak@samsung.com> + * + * Framebuffer register definitions for Samsung S5PC100. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_FB_H +#define __ASM_ARCH_REGS_FB_H __FILE__ + +#include <plat/regs-fb-v4.h> + +/* VP1 interface timing control */ +#define VP1CON0 (0x118) +#define VP1_RATECON_EN (1 << 31) +#define VP1_CLKRATE_MASK (0xff) + +#define VP1CON1 (0x11c) +#define VP1_VTREGCON_EN (1 << 31) +#define VP1_VBPD_MASK (0xfff) +#define VP1_VBPD_SHIFT (16) + + +#define WPALCON_H (0x19c) +#define WPALCON_L (0x1a0) + +/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but + * different for WPAL2-4 + */ +/* In WPALCON_L (aka WPALCON) */ +#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3) +#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0) + +/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H, + * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]). + */ +#define WPALCON_L_WxPAL_L_MASK (0x1) +#define WPALCON_L_W2PAL_L_SHIFT (6) +#define WPALCON_L_W3PAL_L_SHIFT (7) +#define WPALCON_L_W4PAL_L_SHIFT (8) + +#define WPALCON_L_WxPAL_H_MASK (0x3) +#define WPALCON_H_W2PAL_H_SHIFT (9) +#define WPALCON_H_W3PAL_H_SHIFT (13) +#define WPALCON_H_W4PAL_H_SHIFT (17) + +/* Per-window alpha value registers */ +/* For window 0 8-bit alpha values are in VIDW0ALPHAx, + * for windows 1-4 alpha values consist of two parts, the 4 low bits are + * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC, + * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0]) + */ +#define VIDWxALPHA0(_win) (0x200 + (_win * 8)) +#define VIDWxALPHA1(_win) (0x204 + (_win * 8)) + +/* Only for window 0 in VIDW0ALPHAx. */ +#define VIDW0ALPHAx_R(_x) ((_x) << 16) +#define VIDW0ALPHAx_R_MASK (0xff << 16) +#define VIDW0ALPHAx_R_SHIFT (16) +#define VIDW0ALPHAx_G(_x) ((_x) << 8) +#define VIDW0ALPHAx_G_MASK (0xff << 8) +#define VIDW0ALPHAx_G_SHIFT (8) +#define VIDW0ALPHAx_B(_x) ((_x) << 0) +#define VIDW0ALPHAx_B_MASK (0xff << 0) +#define VIDW0ALPHAx_B_SHIFT (0) + +/* Low 4 bits of alpha0-1 for windows 1-4 */ +#define VIDW14ALPHAx_R_L(_x) ((_x) << 16) +#define VIDW14ALPHAx_R_L_MASK (0xf << 16) +#define VIDW14ALPHAx_R_L_SHIFT (16) +#define VIDW14ALPHAx_G_L(_x) ((_x) << 8) +#define VIDW14ALPHAx_G_L_MASK (0xf << 8) +#define VIDW14ALPHAx_G_L_SHIFT (8) +#define VIDW14ALPHAx_B_L(_x) ((_x) << 0) +#define VIDW14ALPHAx_B_L_MASK (0xf << 0) +#define VIDW14ALPHAx_B_L_SHIFT (0) + + +/* Per-window blending equation control registers */ +#define BLENDEQx(_win) (0x244 + ((_win) * 4)) +#define BLENDEQ1 (0x244) +#define BLENDEQ2 (0x248) +#define BLENDEQ3 (0x24c) +#define BLENDEQ4 (0x250) + +#define BLENDEQx_Q_FUNC(_x) ((_x) << 18) +#define BLENDEQx_Q_FUNC_MASK (0xf << 18) +#define BLENDEQx_P_FUNC(_x) ((_x) << 12) +#define BLENDEQx_P_FUNC_MASK (0xf << 12) +#define BLENDEQx_B_FUNC(_x) ((_x) << 6) +#define BLENDEQx_B_FUNC_MASK (0xf << 6) +#define BLENDEQx_A_FUNC(_x) ((_x) << 0) +#define BLENDEQx_A_FUNC_MASK (0xf << 0) + +#define BLENDCON (0x260) +#define BLENDCON_8BIT_ALPHA (1 << 0) + +/* Per-window palette base addresses (start of palette memory). + * Each window palette area consists of 256 32-bit entries. + * START is the first address (entry 0th), END is the address of 255th entry. + */ +#define WIN0_PAL_BASE (0x2400) +#define WIN0_PAL_END (0x27fc) +#define WIN1_PAL_BASE (0x2800) +#define WIN1_PAL_END (0x2bfc) +#define WIN2_PAL_BASE (0x2c00) +#define WIN2_PAL_END (0x2ffc) +#define WIN3_PAL_BASE (0x3000) +#define WIN3_PAL_END (0x33fc) +#define WIN4_PAL_BASE (0x3400) +#define WIN4_PAL_END (0x37fc) + +#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4)) +#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4)) +#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4)) +#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4)) +#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4)) + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + switch (window) { + case 0: return WIN0_PAL(reg); + case 1: return WIN1_PAL(reg); + case 2: return WIN2_PAL(reg); + case 3: return WIN3_PAL(reg); + case 4: return WIN4_PAL(reg); + } + + BUG(); +} + + +#endif /* __ASM_ARCH_REGS_FB_H */ + diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index e3901437547..f0d31a2a598 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -11,14 +11,21 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ +#include <linux/io.h> +#include <mach/map.h> +#include <plat/regs-clock.h> + +void (*s5pc1xx_idle)(void); + static void arch_idle(void) { - /* nothing here yet */ + if (s5pc1xx_idle) + s5pc1xx_idle(); } static void arch_reset(char mode, const char *cmd) { - /* nothing here yet */ + __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET); + return; } - #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 214093cd763..ae3c52cd0eb 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -27,16 +27,22 @@ #include <asm/mach/map.h> #include <mach/map.h> +#include <mach/regs-fb.h> +#include <video/platform_lcd.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-gpio.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/s5pc100.h> +#include <plat/fb.h> +#include <plat/iic.h> #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) @@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { }, }; +/* I2C0 */ +static struct i2c_board_info i2c_devs0[] __initdata = { +}; + +/* I2C1 */ +static struct i2c_board_info i2c_devs1[] __initdata = { +}; + +/* LCD power controller */ +static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + /* backlight */ + gpio_direction_output(S5PC100_GPD(0), power); + + if (power) { + /* module reset */ + gpio_direction_output(S5PC100_GPH0(6), 1); + mdelay(100); + gpio_direction_output(S5PC100_GPH0(6), 0); + mdelay(10); + gpio_direction_output(S5PC100_GPH0(6), 1); + mdelay(10); + } +} + +static struct plat_lcd_data smdkc100_lcd_power_data = { + .set_power = smdkc100_lcd_power_set, +}; + +static struct platform_device smdkc100_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdkc100_lcd_power_data, +}; + +/* Frame Buffer */ +static struct s3c_fb_pd_win smdkc100_fb_win0 = { + /* this is to ensure we use win0 */ + .win_mode = { + .refresh = 70, + .pixclock = (8+13+3+800)*(7+5+1+480), + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { + .win[0] = &smdkc100_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5pc100_fb_gpio_setup_24bpp, +}; + static struct map_desc smdkc100_iodesc[] = {}; static struct platform_device *smdkc100_devices[] __initdata = { + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_fb, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &smdkc100_lcd_powerdev, }; static void __init smdkc100_map_io(void) @@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { + /* I2C */ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + s3c_fb_set_platdata(&smdkc100_lcd_pdata); + + /* LCD init */ + gpio_request(S5PC100_GPD(0), "GPD"); + gpio_request(S5PC100_GPH0(6), "GPH0"); + smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); } MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S5PC1XX_PA_UART & 0xfff00000, + .phys_io = S5PC100_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, .boot_params = S5PC100_PA_SDRAM + 0x100, diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c new file mode 100644 index 00000000000..4385986a3da --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s5pc100/setup-sdhci.c + * + * Copyright 2008 Samsung Electronics + * + * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * Based on mach-s3c6410/setup-sdhci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pc100_hsmmc_clksrcs[4] = { + [0] = "hsmmc", + [1] = "hsmmc", + /* [2] = "mmc_bus", not yet succesfuuly used yet */ + /* [3] = "48m", - note not succesfully used yet */ +}; + + +void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7b7d4c36c11..dd4698c67cc 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX + bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE select CPU_32v6 select CPU_ABRT_EV6 select CPU_PABRT_V6 @@ -764,6 +764,15 @@ config CACHE_L2X0 help This option enables the L2x0 PrimeCell. +config CACHE_TAUROS2 + bool "Enable the Tauros2 L2 cache controller" + depends on ARCH_DOVE + default y + select OUTER_CACHE + help + This option enables the Tauros2 L2 cache controller (as + found on PJ1/PJ4). + config CACHE_XSC3L2 bool "Enable the L2 cache on XScale3" depends on CPU_XSC3 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 42352e75742..827e238e5d4 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -87,4 +87,4 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o - +obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c new file mode 100644 index 00000000000..50868651890 --- /dev/null +++ b/arch/arm/mm/cache-tauros2.c @@ -0,0 +1,263 @@ +/* + * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support + * + * Copyright (C) 2008 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * References: + * - PJ1 CPU Core Datasheet, + * Document ID MV-S104837-01, Rev 0.7, January 24 2008. + * - PJ4 CPU Core Datasheet, + * Document ID MV-S105190-00, Rev 0.7, March 14 2008. + */ + +#include <linux/init.h> +#include <asm/cacheflush.h> +#include <asm/hardware/cache-tauros2.h> + + +/* + * When Tauros2 is used on a CPU that supports the v7 hierarchical + * cache operations, the cache handling code in proc-v7.S takes care + * of everything, including handling DMA coherency. + * + * So, we only need to register outer cache operations here if we're + * being used on a pre-v7 CPU, and we only need to build support for + * outer cache operations into the kernel image if the kernel has been + * configured to support a pre-v7 CPU. + */ +#if __LINUX_ARM_ARCH__ < 7 +/* + * Low-level cache maintenance operations. + */ +static inline void tauros2_clean_pa(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr)); +} + +static inline void tauros2_clean_inv_pa(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr)); +} + +static inline void tauros2_inv_pa(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr)); +} + + +/* + * Linux primitives. + * + * Note that the end addresses passed to Linux primitives are + * noninclusive. + */ +#define CACHE_LINE_SIZE 32 + +static void tauros2_inv_range(unsigned long start, unsigned long end) +{ + /* + * Clean and invalidate partial first cache line. + */ + if (start & (CACHE_LINE_SIZE - 1)) { + tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1)); + start = (start | (CACHE_LINE_SIZE - 1)) + 1; + } + + /* + * Clean and invalidate partial last cache line. + */ + if (end & (CACHE_LINE_SIZE - 1)) { + tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); + end &= ~(CACHE_LINE_SIZE - 1); + } + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start < end) { + tauros2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static void tauros2_clean_range(unsigned long start, unsigned long end) +{ + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + tauros2_clean_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static void tauros2_flush_range(unsigned long start, unsigned long end) +{ + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + tauros2_clean_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} +#endif + +static inline u32 __init read_extra_features(void) +{ + u32 u; + + __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u)); + + return u; +} + +static inline void __init write_extra_features(u32 u) +{ + __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u)); +} + +static void __init disable_l2_prefetch(void) +{ + u32 u; + + /* + * Read the CPU Extra Features register and verify that the + * Disable L2 Prefetch bit is set. + */ + u = read_extra_features(); + if (!(u & 0x01000000)) { + printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n"); + write_extra_features(u | 0x01000000); + } +} + +static inline int __init cpuid_scheme(void) +{ + extern int processor_id; + + return !!((processor_id & 0x000f0000) == 0x000f0000); +} + +static inline u32 __init read_mmfr3(void) +{ + u32 mmfr3; + + __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3)); + + return mmfr3; +} + +static inline u32 __init read_actlr(void) +{ + u32 actlr; + + __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr)); + + return actlr; +} + +static inline void __init write_actlr(u32 actlr) +{ + __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr)); +} + +void __init tauros2_init(void) +{ + extern int processor_id; + char *mode; + + disable_l2_prefetch(); + +#ifdef CONFIG_CPU_32v5 + if ((processor_id & 0xff0f0000) == 0x56050000) { + u32 feat; + + /* + * v5 CPUs with Tauros2 have the L2 cache enable bit + * located in the CPU Extra Features register. + */ + feat = read_extra_features(); + if (!(feat & 0x00400000)) { + printk(KERN_INFO "Tauros2: Enabling L2 cache.\n"); + write_extra_features(feat | 0x00400000); + } + + mode = "ARMv5"; + outer_cache.inv_range = tauros2_inv_range; + outer_cache.clean_range = tauros2_clean_range; + outer_cache.flush_range = tauros2_flush_range; + } +#endif + +#ifdef CONFIG_CPU_32v6 + /* + * Check whether this CPU lacks support for the v7 hierarchical + * cache ops. (PJ4 is in its v6 personality mode if the MMFR3 + * register indicates no support for the v7 hierarchical cache + * ops.) + */ + if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) { + /* + * When Tauros2 is used in an ARMv6 system, the L2 + * enable bit is in the ARMv6 ARM-mandated position + * (bit [26] of the System Control Register). + */ + if (!(get_cr() & 0x04000000)) { + printk(KERN_INFO "Tauros2: Enabling L2 cache.\n"); + adjust_cr(0x04000000, 0x04000000); + } + + mode = "ARMv6"; + outer_cache.inv_range = tauros2_inv_range; + outer_cache.clean_range = tauros2_clean_range; + outer_cache.flush_range = tauros2_flush_range; + } +#endif + +#ifdef CONFIG_CPU_32v7 + /* + * Check whether this CPU has support for the v7 hierarchical + * cache ops. (PJ4 is in its v7 personality mode if the MMFR3 + * register indicates support for the v7 hierarchical cache + * ops.) + * + * (Although strictly speaking there may exist CPUs that + * implement the v7 cache ops but are only ARMv6 CPUs (due to + * not complying with all of the other ARMv7 requirements), + * there are no real-life examples of Tauros2 being used on + * such CPUs as of yet.) + */ + if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) { + u32 actlr; + + /* + * When Tauros2 is used in an ARMv7 system, the L2 + * enable bit is located in the Auxiliary System Control + * Register (which is the only register allowed by the + * ARMv7 spec to contain fine-grained cache control bits). + */ + actlr = read_actlr(); + if (!(actlr & 0x00000002)) { + printk(KERN_INFO "Tauros2: Enabling L2 cache.\n"); + write_actlr(actlr | 0x00000002); + } + + mode = "ARMv7"; + } +#endif + + if (mode == NULL) { + printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n"); + return; + } + + printk(KERN_INFO "Tauros2: L2 cache support initialised " + "in %s mode.\n", mode); +} diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 2427cdcd909..8c7fbd19a4b 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -881,7 +881,7 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_EXCLUSIVE); } - if (machine_is_treo680()) { + if (machine_is_treo680() || machine_is_centro()) { reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, BOOTMEM_EXCLUSIVE); reserve_bootmem_node(pgdat, 0xa2000000, 0x1000, diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 70f75d2e3ea..5485c821101 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext) - + .type cpu_v6_name, #object cpu_v6_name: .asciz "ARMv6-compatible processor" + .size cpu_v6_name, . - cpu_v6_name + + .type cpu_pj4_name, #object +cpu_pj4_name: + .asciz "Marvell PJ4 processor" + .size cpu_pj4_name, . - cpu_pj4_name + .align __INIT @@ -241,3 +248,27 @@ __v6_proc_info: .long v6_user_fns .long v6_cache_fns .size __v6_proc_info, . - __v6_proc_info + + .type __pj4_v6_proc_info, #object +__pj4_v6_proc_info: + .long 0x560f5810 + .long 0xff0ffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_SECT_XN | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __v6_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_pj4_name + .long v6_processor_functions + .long v6wbi_tlb_fns + .long v6_user_fns + .long v6_cache_fns + .size __pj4_v6_proc_info, . - __pj4_v6_proc_info diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 2028f370288..fab134e2982 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -396,7 +396,7 @@ __xsc3_setup: orr r4, r4, #0x18 @ cache the page table in L2 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - mov r0, #0 @ don't allow CP access + mov r0, #1 << 6 @ cp6 access for early sched_clock mcr p15, 0, r0, c15, c1, 0 @ write CP access register mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 8da95d57c21..6c8a02ad98e 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/timex.h> #include <linux/io.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/uaccess.h> @@ -26,45 +28,136 @@ #include <asm/mach/time.h> #include <mach/time.h> +/* + * IOP clocksource (free-running timer 1). + */ +static cycle_t iop_clocksource_read(struct clocksource *unused) +{ + return 0xffffffffu - read_tcr1(); +} + +static struct clocksource iop_clocksource = { + .name = "iop_timer1", + .rating = 300, + .read = iop_clocksource_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz) +{ + u64 temp; + u32 shift; + + /* Find shift and mult values for hz. */ + shift = 32; + do { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, hz); + if ((temp >> 32) == 0) + break; + } while (--shift != 0); + + cs->shift = shift; + cs->mult = (u32) temp; + + printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n", + cs->name, cs->shift, cs->mult); +} + +/* + * IOP sched_clock() implementation via its clocksource. + */ +unsigned long long sched_clock(void) +{ + cycle_t cyc = iop_clocksource_read(NULL); + struct clocksource *cs = &iop_clocksource; + + return clocksource_cyc2ns(cyc, cs->mult, cs->shift); +} + +/* + * IOP clockevents (interrupting timer 0). + */ +static int iop_set_next_event(unsigned long delta, + struct clock_event_device *unused) +{ + u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1; + + BUG_ON(delta == 0); + write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD)); + write_tcr0(delta); + write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN); + + return 0; +} + static unsigned long ticks_per_jiffy; -static unsigned long ticks_per_usec; -static unsigned long next_jiffy_time; -unsigned long iop_gettimeoffset(void) +static void iop_set_mode(enum clock_event_mode mode, + struct clock_event_device *unused) { - unsigned long offset, temp; + u32 tmr = read_tmr0(); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + write_tmr0(tmr & ~IOP_TMR_EN); + write_tcr0(ticks_per_jiffy - 1); + tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* ->set_next_event sets period and enables timer */ + tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN); + break; + case CLOCK_EVT_MODE_RESUME: + tmr |= IOP_TMR_EN; + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + default: + tmr &= ~IOP_TMR_EN; + break; + } - /* enable cp6, if necessary, to avoid taking the overhead of an - * undefined instruction trap - */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "tst %0, #(1 << 6)\n\t" - "orreq %0, %0, #(1 << 6)\n\t" - "mcreq p15, 0, %0, c15, c1, 0\n\t" -#ifdef CONFIG_CPU_XSCALE - "mrceq p15, 0, %0, c15, c1, 0\n\t" - "moveq %0, %0\n\t" - "subeq pc, pc, #4\n\t" -#endif - : "=r"(temp) : : "cc"); - - offset = next_jiffy_time - read_tcr1(); - - return offset / ticks_per_usec; + write_tmr0(tmr); +} + +static struct clock_event_device iop_clockevent = { + .name = "iop_timer0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = iop_set_next_event, + .set_mode = iop_set_mode, +}; + +static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz) +{ + u64 temp; + u32 shift; + + /* Find shift and mult values for hz. */ + shift = 32; + do { + temp = (u64) hz << shift; + do_div(temp, NSEC_PER_SEC); + if ((temp >> 32) == 0) + break; + } while (--shift != 0); + + ce->shift = shift; + ce->mult = (u32) temp; + + printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n", + ce->name, ce->shift, ce->mult); } static irqreturn_t iop_timer_interrupt(int irq, void *dev_id) { - write_tisr(1); - - while ((signed long)(next_jiffy_time - read_tcr1()) - >= ticks_per_jiffy) { - timer_tick(); - next_jiffy_time -= ticks_per_jiffy; - } + struct clock_event_device *evt = dev_id; + write_tisr(1); + evt->event_handler(evt); return IRQ_HANDLED; } @@ -72,6 +165,7 @@ static struct irqaction iop_timer_irq = { .name = "IOP Timer Tick", .handler = iop_timer_interrupt, .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .dev_id = &iop_clockevent, }; static unsigned long iop_tick_rate; @@ -86,21 +180,33 @@ void __init iop_init_time(unsigned long tick_rate) u32 timer_ctl; ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); - ticks_per_usec = tick_rate / 1000000; - next_jiffy_time = 0xffffffff; iop_tick_rate = tick_rate; timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED | IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1; /* - * We use timer 0 for our timer interrupt, and timer 1 as - * monotonic counter for tracking missed jiffies. + * Set up interrupting clockevent timer 0. */ + write_tmr0(timer_ctl & ~IOP_TMR_EN); + setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); + iop_clockevent_set_hz(&iop_clockevent, tick_rate); + iop_clockevent.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &iop_clockevent); + iop_clockevent.min_delta_ns = + clockevent_delta2ns(0xf, &iop_clockevent); + iop_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&iop_clockevent); write_trr0(ticks_per_jiffy - 1); + write_tcr0(ticks_per_jiffy - 1); write_tmr0(timer_ctl); + + /* + * Set up free-running clocksource timer 1. + */ write_trr1(0xffffffff); + write_tcr1(0xffffffff); write_tmr1(timer_ctl); - - setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); + iop_clocksource_set_hz(&iop_clocksource, tick_rate); + clocksource_register(&iop_clocksource); } diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index ca5c7c22634..8b0a1ee039f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -69,10 +69,20 @@ config MXC_PWM help Enable support for the i.MX PWM controller(s). +config MXC_ULPI + bool + config ARCH_HAS_RNGA bool depends on ARCH_MXC config ARCH_MXC_IOMUX_V3 bool + +config ARCH_MXC_AUDMUX_V1 + bool + +config ARCH_MXC_AUDMUX_V2 + bool + endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index e3212c8ff42..4cbca9da150 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -9,3 +9,6 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o +obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o +obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c new file mode 100644 index 00000000000..da6387dcdf2 --- /dev/null +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -0,0 +1,58 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <mach/audmux.h> +#include <mach/hardware.h> + +static void __iomem *audmux_base; + +static unsigned char port_mapping[] = { + 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, +}; + +int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) +{ + if (!audmux_base) { + printk("%s: not configured\n", __func__); + return -ENOSYS; + } + + if (port >= ARRAY_SIZE(port_mapping)) + return -EINVAL; + + writel(pcr, audmux_base + port_mapping[port]); + + return 0; +} +EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); + +static int mxc_audmux_v1_init(void) +{ + if (cpu_is_mx27() || cpu_is_mx21()) + audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); + return 0; +} + +postcore_initcall(mxc_audmux_v1_init); diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c new file mode 100644 index 00000000000..6f21096086f --- /dev/null +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -0,0 +1,74 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <mach/audmux.h> +#include <mach/hardware.h> + +static struct clk *audmux_clk; +static void __iomem *audmux_base; + +#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) +#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) + +int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, + unsigned int pdcr) +{ + if (!audmux_base) + return -ENOSYS; + + if (audmux_clk) + clk_enable(audmux_clk); + + writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port)); + writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port)); + + if (audmux_clk) + clk_disable(audmux_clk); + + return 0; +} +EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); + +static int mxc_audmux_v2_init(void) +{ + int ret; + + if (cpu_is_mx35()) { + audmux_clk = clk_get(NULL, "audmux"); + if (IS_ERR(audmux_clk)) { + ret = PTR_ERR(audmux_clk); + printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, + ret); + return ret; + } + } + + if (cpu_is_mx31() || cpu_is_mx35()) + audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); + + return 0; +} + +postcore_initcall(mxc_audmux_v2_init); diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 77646436c00..9c1b3f9c4f4 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -156,7 +156,8 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) } now = min(imxdma->resbytes, sg->length); - imxdma->resbytes -= now; + if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP) + imxdma->resbytes -= now; if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel)); diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index cfc4a8b43e6..d65ebe303b9 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -282,7 +282,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) for (j = port[i].virtual_irq_start; j < port[i].virtual_irq_start + 32; j++) { set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_edge_irq); + set_irq_handler(j, handle_level_irq); set_irq_flags(j, IRQF_VALID); } diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h new file mode 100644 index 00000000000..5cd6466964a --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/audmux.h @@ -0,0 +1,52 @@ +#ifndef __MACH_AUDMUX_H +#define __MACH_AUDMUX_H + +#define MX27_AUDMUX_HPCR1_SSI0 0 +#define MX27_AUDMUX_HPCR2_SSI1 1 +#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 +#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 +#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 +#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 + +#define MX31_AUDMUX_PORT1_SSI0 0 +#define MX31_AUDMUX_PORT2_SSI1 1 +#define MX31_AUDMUX_PORT3_SSI_PINS_3 2 +#define MX31_AUDMUX_PORT4_SSI_PINS_4 3 +#define MX31_AUDMUX_PORT5_SSI_PINS_5 4 +#define MX31_AUDMUX_PORT6_SSI_PINS_6 5 + +/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ +#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) +#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) +#define MXC_AUDMUX_V1_PCR_TXRXEN (1 << 10) +#define MXC_AUDMUX_V1_PCR_SYN (1 << 12) +#define MXC_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) +#define MXC_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) +#define MXC_AUDMUX_V1_PCR_RCLKDIR (1 << 24) +#define MXC_AUDMUX_V1_PCR_RFSDIR (1 << 25) +#define MXC_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) +#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) +#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) + +/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */ +#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) +#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) +#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) +#define MXC_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) +#define MXC_AUDMUX_V2_PTCR_RFSDIR (1 << 21) +#define MXC_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) +#define MXC_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) +#define MXC_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) +#define MXC_AUDMUX_V2_PTCR_SYN (1 << 11) + +#define MXC_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) +#define MXC_AUDMUX_V2_PDCR_TXRXEN (1 << 12) +#define MXC_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) +#define MXC_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) + +int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr); + +int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, + unsigned int pdcr); + +#endif /* __MACH_AUDMUX_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h new file mode 100644 index 00000000000..05ff2f31ef1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H +#define __ARM_ARCH_BOARD_KZM_ARM11_H + +/* + * KZM-ARM11-01 Board Control Registers on FPGA + */ +#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003) + +/* + * External UART for touch panel on FPGA + */ +#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050) + +#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ + diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 8e64325d690..0184b638c26 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -1,15 +1,42 @@ /* * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on code for mobots boards, + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ +#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ + +#ifndef __ASSEMBLY__ + +enum mx31lilly_boards { + MX31LITE_NOBOARD = 0, + MX31LITE_DB = 1, +}; + /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. */ -#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ +extern void mx31lite_db_init(void); -#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ +#endif +#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h index b3876cc238c..07be8ad7ec3 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h @@ -58,6 +58,14 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address, unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode); + +/* + * Use this flag as the dma_length argument to imx_dma_setup_sg() + * to create an endless running dma loop. The end of the scatterlist + * must be linked to the beginning for this to work. + */ +#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1) + int imx_dma_setup_sg(int channel, struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 446f8676381..eaabd4e9692 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -524,10 +524,18 @@ enum iomux_pins { #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC) #define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) #define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE) #define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2) #define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2) #define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2) @@ -623,6 +631,8 @@ enum iomux_pins { #define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) @@ -642,12 +652,22 @@ enum iomux_pins { #define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) +#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) #define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) @@ -693,7 +713,19 @@ enum iomux_pins { #define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) #define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) - +#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index a0fa4026546..1deda018489 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -88,9 +88,7 @@ struct pad_desc { #define PAD_CTL_SRE_FAST (1 << 0) /* - * setups a single pad: - * - reserves the pad so that it is not claimed by another driver - * - setups the iomux according to the configuration + * setups a single pad in the iomuxer */ int mxc_iomux_v3_setup_pad(struct pad_desc *pad); @@ -101,19 +99,6 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad); int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); /* - * releases a single pad: - * - make it available for a future use by another driver - * - DOES NOT reconfigure the IOMUX in its reset state - */ -void mxc_iomux_v3_release_pad(struct pad_desc *pad); - -/* - * releases multiple pads - * convenvient way to call the above function with tables - */ -void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); - -/* * Initialise the iomux controller */ void mxc_iomux_v3_init(void __iomem *iomux_v3_base); diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 6d49f8ae325..011cfcd8b82 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -123,6 +123,7 @@ #define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) #define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) #define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) +#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) extern void mxc_gpio_mode(int gpio_mode); diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index 21112c695ec..bb297d8765a 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -25,46 +25,191 @@ #ifndef __ASM_ARCH_MXC_MX21_H__ #define __ASM_ARCH_MXC_MX21_H__ +#define MX21_AIPI_BASE_ADDR 0x10000000 +#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000 +#define MX21_AIPI_SIZE SZ_1M +#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000) +#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000) +#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000) +#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000) +#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000) +#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000) +#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000) +#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000) +#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000) +#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000) +#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000) +#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000) +#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000) +#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000) +#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000) +#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000) +#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000) +#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000) +#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000) +#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000) +#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000) +#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000) +#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000) +#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000) +#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000) +#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000) +#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000) +#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400) +#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000) +#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800) +#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000) +#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000) + +#define MX21_AVIC_BASE_ADDR 0x10040000 + +#define MX21_SAHB1_BASE_ADDR 0x80000000 +#define MX21_SAHB1_BASE_ADDR_VIRT 0xf4100000 +#define MX21_SAHB1_SIZE SZ_1M +#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) + /* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xC0000000 -#define CSD1_BASE_ADDR 0xC4000000 +#define MX21_SDRAM_BASE_ADDR 0xc0000000 +#define MX21_CSD1_BASE_ADDR 0xc4000000 -#define CS0_BASE_ADDR 0xC8000000 -#define CS1_BASE_ADDR 0xCC000000 -#define CS2_BASE_ADDR 0xD0000000 -#define CS3_BASE_ADDR 0xD1000000 -#define CS4_BASE_ADDR 0xD2000000 -#define CS5_BASE_ADDR 0xDD000000 -#define PCMCIA_MEM_BASE_ADDR 0xD4000000 +#define MX21_CS0_BASE_ADDR 0xc8000000 +#define MX21_CS1_BASE_ADDR 0xcc000000 +#define MX21_CS2_BASE_ADDR 0xd0000000 +#define MX21_CS3_BASE_ADDR 0xd1000000 +#define MX21_CS4_BASE_ADDR 0xd2000000 +#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000 +#define MX21_CS5_BASE_ADDR 0xdd000000 /* NAND, SDRAM, WEIM etc controllers */ -#define X_MEMC_BASE_ADDR 0xDF000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_256K +#define MX21_X_MEMC_BASE_ADDR 0xdf000000 +#define MX21_X_MEMC_BASE_ADDR_VIRT 0xf4200000 +#define MX21_X_MEMC_SIZE SZ_256K -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define EIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000) +#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000) +#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000) +#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000) -#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ +#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ /* fixed interrupt numbers */ -#define MXC_INT_USBCTRL 58 -#define MXC_INT_USBCTRL 58 -#define MXC_INT_USBMNP 57 -#define MXC_INT_USBFUNC 56 -#define MXC_INT_USBHOST 55 -#define MXC_INT_USBDMA 54 -#define MXC_INT_USBWKUP 53 -#define MXC_INT_EMMADEC 50 -#define MXC_INT_EMMAENC 49 -#define MXC_INT_BMI 30 -#define MXC_INT_FIRI 9 +#define MX21_INT_CSPI3 6 +#define MX21_INT_GPIO 8 +#define MX21_INT_FIRI 9 +#define MX21_INT_SDHC2 10 +#define MX21_INT_SDHC1 11 +#define MX21_INT_I2C 12 +#define MX21_INT_SSI2 13 +#define MX21_INT_SSI1 14 +#define MX21_INT_CSPI2 15 +#define MX21_INT_CSPI1 16 +#define MX21_INT_UART4 17 +#define MX21_INT_UART3 18 +#define MX21_INT_UART2 19 +#define MX21_INT_UART1 20 +#define MX21_INT_KPP 21 +#define MX21_INT_RTC 22 +#define MX21_INT_PWM 23 +#define MX21_INT_GPT3 24 +#define MX21_INT_GPT2 25 +#define MX21_INT_GPT1 26 +#define MX21_INT_WDOG 27 +#define MX21_INT_PCMCIA 28 +#define MX21_INT_NANDFC 29 +#define MX21_INT_BMI 30 +#define MX21_INT_CSI 31 +#define MX21_INT_DMACH0 32 +#define MX21_INT_DMACH1 33 +#define MX21_INT_DMACH2 34 +#define MX21_INT_DMACH3 35 +#define MX21_INT_DMACH4 36 +#define MX21_INT_DMACH5 37 +#define MX21_INT_DMACH6 38 +#define MX21_INT_DMACH7 39 +#define MX21_INT_DMACH8 40 +#define MX21_INT_DMACH9 41 +#define MX21_INT_DMACH10 42 +#define MX21_INT_DMACH11 43 +#define MX21_INT_DMACH12 44 +#define MX21_INT_DMACH13 45 +#define MX21_INT_DMACH14 46 +#define MX21_INT_DMACH15 47 +#define MX21_INT_EMMAENC 49 +#define MX21_INT_EMMADEC 50 +#define MX21_INT_EMMAPRP 51 +#define MX21_INT_EMMAPP 52 +#define MX21_INT_USBWKUP 53 +#define MX21_INT_USBDMA 54 +#define MX21_INT_USBHOST 55 +#define MX21_INT_USBFUNC 56 +#define MX21_INT_USBMNP 57 +#define MX21_INT_USBCTRL 58 +#define MX21_INT_SLCDC 60 +#define MX21_INT_LCDC 61 /* fixed DMA request numbers */ -#define DMA_REQ_BMI_RX 29 -#define DMA_REQ_BMI_TX 28 -#define DMA_REQ_FIRI_RX 4 +#define MX21_DMA_REQ_CSPI3_RX 1 +#define MX21_DMA_REQ_CSPI3_TX 2 +#define MX21_DMA_REQ_EXT 3 +#define MX21_DMA_REQ_FIRI_RX 4 +#define MX21_DMA_REQ_SDHC2 6 +#define MX21_DMA_REQ_SDHC1 7 +#define MX21_DMA_REQ_SSI2_RX0 8 +#define MX21_DMA_REQ_SSI2_TX0 9 +#define MX21_DMA_REQ_SSI2_RX1 10 +#define MX21_DMA_REQ_SSI2_TX1 11 +#define MX21_DMA_REQ_SSI1_RX0 12 +#define MX21_DMA_REQ_SSI1_TX0 13 +#define MX21_DMA_REQ_SSI1_RX1 14 +#define MX21_DMA_REQ_SSI1_TX1 15 +#define MX21_DMA_REQ_CSPI2_RX 16 +#define MX21_DMA_REQ_CSPI2_TX 17 +#define MX21_DMA_REQ_CSPI1_RX 18 +#define MX21_DMA_REQ_CSPI1_TX 19 +#define MX21_DMA_REQ_UART4_RX 20 +#define MX21_DMA_REQ_UART4_TX 21 +#define MX21_DMA_REQ_UART3_RX 22 +#define MX21_DMA_REQ_UART3_TX 23 +#define MX21_DMA_REQ_UART2_RX 24 +#define MX21_DMA_REQ_UART2_TX 25 +#define MX21_DMA_REQ_UART1_RX 26 +#define MX21_DMA_REQ_UART1_TX 27 +#define MX21_DMA_REQ_BMI_TX 28 +#define MX21_DMA_REQ_BMI_RX 29 +#define MX21_DMA_REQ_CSI_STAT 30 +#define MX21_DMA_REQ_CSI_RX 31 + +/* these should go away */ +#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR +#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR +#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR +#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR +#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR +#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR +#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR +#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR +#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR +#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR +#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT +#define X_MEMC_SIZE MX21_X_MEMC_SIZE +#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR +#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR +#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR +#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR +#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR +#define MXC_INT_FIRI MX21_INT_FIRI +#define MXC_INT_BMI MX21_INT_BMI +#define MXC_INT_EMMAENC MX21_INT_EMMAENC +#define MXC_INT_EMMADEC MX21_INT_EMMADEC +#define MXC_INT_USBWKUP MX21_INT_USBWKUP +#define MXC_INT_USBDMA MX21_INT_USBDMA +#define MXC_INT_USBHOST MX21_INT_USBHOST +#define MXC_INT_USBFUNC MX21_INT_USBFUNC +#define MXC_INT_USBMNP MX21_INT_USBMNP +#define MXC_INT_USBCTRL MX21_INT_USBCTRL +#define MXC_INT_USBCTRL MX21_INT_USBCTRL +#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX +#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX +#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX #endif /* __ASM_ARCH_MXC_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index ec64bd9a8ab..91e73814480 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -1,14 +1,14 @@ #ifndef __MACH_MX25_H__ #define __MACH_MX25_H__ -#define MX25_AIPS1_BASE_ADDR 0x43F00000 -#define MX25_AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define MX25_AIPS1_BASE_ADDR 0x43f00000 +#define MX25_AIPS1_BASE_ADDR_VIRT 0xfc000000 #define MX25_AIPS1_SIZE SZ_1M -#define MX25_AIPS2_BASE_ADDR 0x53F00000 -#define MX25_AIPS2_BASE_ADDR_VIRT 0xFC200000 +#define MX25_AIPS2_BASE_ADDR 0x53f00000 +#define MX25_AIPS2_BASE_ADDR_VIRT 0xfc200000 #define MX25_AIPS2_SIZE SZ_1M #define MX25_AVIC_BASE_ADDR 0x68000000 -#define MX25_AVIC_BASE_ADDR_VIRT 0xFC400000 +#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX25_AVIC_SIZE SZ_1M #define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index dc3ad9aa952..e2ae19f5171 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -24,87 +24,198 @@ #ifndef __ASM_ARCH_MXC_MX27_H__ #define __ASM_ARCH_MXC_MX27_H__ -/* IRAM */ -#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ - -#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) -#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) -#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) -#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) -#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) -#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) -#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) -#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) -#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) -#define OTG_BASE_ADDR USBOTG_BASE_ADDR -#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) -#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) -#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) -#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) -#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) -#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) -#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) +#define MX27_AIPI_BASE_ADDR 0x10000000 +#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000 +#define MX27_AIPI_SIZE SZ_1M +#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) +#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000) +#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000) +#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000) +#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000) +#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000) +#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000) +#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000) +#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000) +#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000) +#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000) +#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000) +#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000) +#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000) +#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) +#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) +#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) +#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) +#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) +#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) +#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) +#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) +#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) +#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) +#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) +#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000) +#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000) +#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000) +#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000) +#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000) +#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000) +#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000) +#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000) +#define MX27_USBOTG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) +#define MX27_OTG_BASE_ADDR MX27_USBOTG_BASE_ADDR +#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000) +#define MX27_EMMA_PP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) +#define MX27_EMMA_PRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) +#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000) +#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800) +#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000) +#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000) +#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000) +#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000) +#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000) +#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000) +#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000) +#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000) + +#define MX27_AVIC_BASE_ADDR 0x10040000 /* ROM patch */ -#define ROMP_BASE_ADDR 0x10041000 +#define MX27_ROMP_BASE_ADDR 0x10041000 -#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) +#define MX27_SAHB1_BASE_ADDR 0x80000000 +#define MX27_SAHB1_BASE_ADDR_VIRT 0xf4100000 +#define MX27_SAHB1_SIZE SZ_1M +#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000) +#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000) /* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xA0000000 -#define CSD1_BASE_ADDR 0xB0000000 +#define MX27_SDRAM_BASE_ADDR 0xa0000000 +#define MX27_CSD1_BASE_ADDR 0xb0000000 -#define CS0_BASE_ADDR 0xC0000000 -#define CS1_BASE_ADDR 0xC8000000 -#define CS2_BASE_ADDR 0xD0000000 -#define CS3_BASE_ADDR 0xD2000000 -#define CS4_BASE_ADDR 0xD4000000 -#define CS5_BASE_ADDR 0xD6000000 -#define PCMCIA_MEM_BASE_ADDR 0xDC000000 +#define MX27_CS0_BASE_ADDR 0xc0000000 +#define MX27_CS1_BASE_ADDR 0xc8000000 +#define MX27_CS2_BASE_ADDR 0xd0000000 +#define MX27_CS3_BASE_ADDR 0xd2000000 +#define MX27_CS4_BASE_ADDR 0xd4000000 +#define MX27_CS5_BASE_ADDR 0xd6000000 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define X_MEMC_BASE_ADDR 0xD8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_1M +#define MX27_X_MEMC_BASE_ADDR 0xd8000000 +#define MX27_X_MEMC_BASE_ADDR_VIRT 0xf4200000 +#define MX27_X_MEMC_SIZE SZ_1M +#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR) +#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000) +#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000) +#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) +#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) +#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 + +/* IRAM */ +#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ /* fixed interrupt numbers */ -#define MXC_INT_CCM 63 -#define MXC_INT_IIM 62 -#define MXC_INT_SAHARA 59 -#define MXC_INT_SCC_SCM 58 -#define MXC_INT_SCC_SMN 57 -#define MXC_INT_USB3 56 -#define MXC_INT_USB2 55 -#define MXC_INT_USB1 54 -#define MXC_INT_VPU 53 -#define MXC_INT_FEC 50 -#define MXC_INT_UART5 49 -#define MXC_INT_UART6 48 -#define MXC_INT_ATA 30 -#define MXC_INT_SDHC3 9 -#define MXC_INT_SDHC 7 -#define MXC_INT_RTIC 5 -#define MXC_INT_GPT4 4 -#define MXC_INT_GPT5 3 -#define MXC_INT_GPT6 2 -#define MXC_INT_I2C2 1 +#define MX27_INT_I2C2 1 +#define MX27_INT_GPT6 2 +#define MX27_INT_GPT5 3 +#define MX27_INT_GPT4 4 +#define MX27_INT_RTIC 5 +#define MX27_INT_CSPI3 6 +#define MX27_INT_SDHC 7 +#define MX27_INT_GPIO 8 +#define MX27_INT_SDHC3 9 +#define MX27_INT_SDHC2 10 +#define MX27_INT_SDHC1 11 +#define MX27_INT_I2C 12 +#define MX27_INT_SSI2 13 +#define MX27_INT_SSI1 14 +#define MX27_INT_CSPI2 15 +#define MX27_INT_CSPI1 16 +#define MX27_INT_UART4 17 +#define MX27_INT_UART3 18 +#define MX27_INT_UART2 19 +#define MX27_INT_UART1 20 +#define MX27_INT_KPP 21 +#define MX27_INT_RTC 22 +#define MX27_INT_PWM 23 +#define MX27_INT_GPT3 24 +#define MX27_INT_GPT2 25 +#define MX27_INT_GPT1 26 +#define MX27_INT_WDOG 27 +#define MX27_INT_PCMCIA 28 +#define MX27_INT_NANDFC 29 +#define MX27_INT_ATA 30 +#define MX27_INT_CSI 31 +#define MX27_INT_DMACH0 32 +#define MX27_INT_DMACH1 33 +#define MX27_INT_DMACH2 34 +#define MX27_INT_DMACH3 35 +#define MX27_INT_DMACH4 36 +#define MX27_INT_DMACH5 37 +#define MX27_INT_DMACH6 38 +#define MX27_INT_DMACH7 39 +#define MX27_INT_DMACH8 40 +#define MX27_INT_DMACH9 41 +#define MX27_INT_DMACH10 42 +#define MX27_INT_DMACH11 43 +#define MX27_INT_DMACH12 44 +#define MX27_INT_DMACH13 45 +#define MX27_INT_DMACH14 46 +#define MX27_INT_DMACH15 47 +#define MX27_INT_UART6 48 +#define MX27_INT_UART5 49 +#define MX27_INT_FEC 50 +#define MX27_INT_EMMAPRP 51 +#define MX27_INT_EMMAPP 52 +#define MX27_INT_VPU 53 +#define MX27_INT_USB1 54 +#define MX27_INT_USB2 55 +#define MX27_INT_USB3 56 +#define MX27_INT_SCC_SMN 57 +#define MX27_INT_SCC_SCM 58 +#define MX27_INT_SAHARA 59 +#define MX27_INT_SLCDC 60 +#define MX27_INT_LCDC 61 +#define MX27_INT_IIM 62 +#define MX27_INT_CCM 63 /* fixed DMA request numbers */ -#define DMA_REQ_NFC 37 -#define DMA_REQ_SDHC3 36 -#define DMA_REQ_UART6_RX 35 -#define DMA_REQ_UART6_TX 34 -#define DMA_REQ_UART5_RX 33 -#define DMA_REQ_UART5_TX 32 -#define DMA_REQ_ATA_RCV 29 -#define DMA_REQ_ATA_TX 28 -#define DMA_REQ_MSHC 4 +#define MX27_DMA_REQ_CSPI3_RX 1 +#define MX27_DMA_REQ_CSPI3_TX 2 +#define MX27_DMA_REQ_EXT 3 +#define MX27_DMA_REQ_MSHC 4 +#define MX27_DMA_REQ_SDHC2 6 +#define MX27_DMA_REQ_SDHC1 7 +#define MX27_DMA_REQ_SSI2_RX0 8 +#define MX27_DMA_REQ_SSI2_TX0 9 +#define MX27_DMA_REQ_SSI2_RX1 10 +#define MX27_DMA_REQ_SSI2_TX1 11 +#define MX27_DMA_REQ_SSI1_RX0 12 +#define MX27_DMA_REQ_SSI1_TX0 13 +#define MX27_DMA_REQ_SSI1_RX1 14 +#define MX27_DMA_REQ_SSI1_TX1 15 +#define MX27_DMA_REQ_CSPI2_RX 16 +#define MX27_DMA_REQ_CSPI2_TX 17 +#define MX27_DMA_REQ_CSPI1_RX 18 +#define MX27_DMA_REQ_CSPI1_TX 19 +#define MX27_DMA_REQ_UART4_RX 20 +#define MX27_DMA_REQ_UART4_TX 21 +#define MX27_DMA_REQ_UART3_RX 22 +#define MX27_DMA_REQ_UART3_TX 23 +#define MX27_DMA_REQ_UART2_RX 24 +#define MX27_DMA_REQ_UART2_TX 25 +#define MX27_DMA_REQ_UART1_RX 26 +#define MX27_DMA_REQ_UART1_TX 27 +#define MX27_DMA_REQ_ATA_TX 28 +#define MX27_DMA_REQ_ATA_RCV 29 +#define MX27_DMA_REQ_CSI_STAT 30 +#define MX27_DMA_REQ_CSI_RX 31 +#define MX27_DMA_REQ_UART5_TX 32 +#define MX27_DMA_REQ_UART5_RX 33 +#define MX27_DMA_REQ_UART6_TX 34 +#define MX27_DMA_REQ_UART6_RX 35 +#define MX27_DMA_REQ_SDHC3 36 +#define MX27_DMA_REQ_NFC 37 /* silicon revisions specific to i.MX27 */ #define CHIP_REV_1_0 0x00 @@ -114,6 +225,72 @@ extern int mx27_revision(void); #endif -/* Mandatory defines used globally */ +/* these should go away */ +#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR +#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR +#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR +#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR +#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR +#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR +#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR +#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR +#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR +#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR +#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR +#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR +#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR +#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR +#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR +#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR +#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR +#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR +#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR +#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR +#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR +#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR +#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR +#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR +#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR +#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR +#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR +#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR +#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT +#define X_MEMC_SIZE MX27_X_MEMC_SIZE +#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR +#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR +#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR +#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR +#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR +#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR +#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR +#define MXC_INT_I2C2 MX27_INT_I2C2 +#define MXC_INT_GPT6 MX27_INT_GPT6 +#define MXC_INT_GPT5 MX27_INT_GPT5 +#define MXC_INT_GPT4 MX27_INT_GPT4 +#define MXC_INT_RTIC MX27_INT_RTIC +#define MXC_INT_SDHC MX27_INT_SDHC +#define MXC_INT_SDHC3 MX27_INT_SDHC3 +#define MXC_INT_ATA MX27_INT_ATA +#define MXC_INT_UART6 MX27_INT_UART6 +#define MXC_INT_UART5 MX27_INT_UART5 +#define MXC_INT_FEC MX27_INT_FEC +#define MXC_INT_VPU MX27_INT_VPU +#define MXC_INT_USB1 MX27_INT_USB1 +#define MXC_INT_USB2 MX27_INT_USB2 +#define MXC_INT_USB3 MX27_INT_USB3 +#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN +#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM +#define MXC_INT_SAHARA MX27_INT_SAHARA +#define MXC_INT_IIM MX27_INT_IIM +#define MXC_INT_CCM MX27_INT_CCM +#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC +#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX +#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV +#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX +#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX +#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX +#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX +#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3 +#define DMA_REQ_NFC MX27_DMA_REQ_NFC #endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index db5d921e0fe..f2eaf140ed0 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -25,51 +25,49 @@ /* The following addresses are common between i.MX21 and i.MX27 */ -/* Register offests */ -#define AIPI_BASE_ADDR 0x10000000 -#define AIPI_BASE_ADDR_VIRT 0xF4000000 -#define AIPI_SIZE SZ_1M - -#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) -#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) -#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) -#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) -#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) -#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) -#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) -#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) -#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) -#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) -#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) -#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) -#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) -#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) -#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) -#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) -#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) -#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) -#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) -#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) -#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) -#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) -#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) -#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) -#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) -#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) -#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000) -#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) -#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) -#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) -#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) -#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) - -#define AVIC_BASE_ADDR 0x10040000 - -#define SAHB1_BASE_ADDR 0x80000000 -#define SAHB1_BASE_ADDR_VIRT 0xF4100000 -#define SAHB1_SIZE SZ_1M - -#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) +/* Register offsets */ +#define MX2x_AIPI_BASE_ADDR 0x10000000 +#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4000000 +#define MX2x_AIPI_SIZE SZ_1M +#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000) +#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000) +#define MX2x_GPT1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x03000) +#define MX2x_GPT2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x04000) +#define MX2x_GPT3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x05000) +#define MX2x_PWM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x06000) +#define MX2x_RTC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x07000) +#define MX2x_KPP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x08000) +#define MX2x_OWIRE_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x09000) +#define MX2x_UART1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0a000) +#define MX2x_UART2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0b000) +#define MX2x_UART3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0c000) +#define MX2x_UART4_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0d000) +#define MX2x_CSPI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0e000) +#define MX2x_CSPI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0f000) +#define MX2x_SSI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x10000) +#define MX2x_SSI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x11000) +#define MX2x_I2C_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x12000) +#define MX2x_SDHC1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x13000) +#define MX2x_SDHC2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x14000) +#define MX2x_GPIO_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x15000) +#define MX2x_AUDMUX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x16000) +#define MX2x_CSPI3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x17000) +#define MX2x_LCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x21000) +#define MX2x_SLCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x22000) +#define MX2x_USBOTG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x24000) +#define MX2x_EMMA_PP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26000) +#define MX2x_EMMA_PRP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26400) +#define MX2x_CCM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27000) +#define MX2x_SYSCTRL_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27800) +#define MX2x_JAM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3e000) +#define MX2x_MAX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3f000) + +#define MX2x_AVIC_BASE_ADDR 0x10040000 + +#define MX2x_SAHB1_BASE_ADDR 0x80000000 +#define MX2x_SAHB1_BASE_ADDR_VIRT 0xf4100000 +#define MX2x_SAHB1_SIZE SZ_1M +#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) /* * This macro defines the physical to virtual address mapping for all the @@ -105,78 +103,189 @@ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) /* fixed interrupt numbers */ -#define MXC_INT_LCDC 61 -#define MXC_INT_SLCDC 60 -#define MXC_INT_EMMAPP 52 -#define MXC_INT_EMMAPRP 51 -#define MXC_INT_DMACH15 47 -#define MXC_INT_DMACH14 46 -#define MXC_INT_DMACH13 45 -#define MXC_INT_DMACH12 44 -#define MXC_INT_DMACH11 43 -#define MXC_INT_DMACH10 42 -#define MXC_INT_DMACH9 41 -#define MXC_INT_DMACH8 40 -#define MXC_INT_DMACH7 39 -#define MXC_INT_DMACH6 38 -#define MXC_INT_DMACH5 37 -#define MXC_INT_DMACH4 36 -#define MXC_INT_DMACH3 35 -#define MXC_INT_DMACH2 34 -#define MXC_INT_DMACH1 33 -#define MXC_INT_DMACH0 32 -#define MXC_INT_CSI 31 -#define MXC_INT_NANDFC 29 -#define MXC_INT_PCMCIA 28 -#define MXC_INT_WDOG 27 -#define MXC_INT_GPT1 26 -#define MXC_INT_GPT2 25 -#define MXC_INT_GPT3 24 -#define MXC_INT_GPT INT_GPT1 -#define MXC_INT_PWM 23 -#define MXC_INT_RTC 22 -#define MXC_INT_KPP 21 -#define MXC_INT_UART1 20 -#define MXC_INT_UART2 19 -#define MXC_INT_UART3 18 -#define MXC_INT_UART4 17 -#define MXC_INT_CSPI1 16 -#define MXC_INT_CSPI2 15 -#define MXC_INT_SSI1 14 -#define MXC_INT_SSI2 13 -#define MXC_INT_I2C 12 -#define MXC_INT_SDHC1 11 -#define MXC_INT_SDHC2 10 -#define MXC_INT_GPIO 8 -#define MXC_INT_CSPI3 6 +#define MX2x_INT_CSPI3 6 +#define MX2x_INT_GPIO 8 +#define MX2x_INT_SDHC2 10 +#define MX2x_INT_SDHC1 11 +#define MX2x_INT_I2C 12 +#define MX2x_INT_SSI2 13 +#define MX2x_INT_SSI1 14 +#define MX2x_INT_CSPI2 15 +#define MX2x_INT_CSPI1 16 +#define MX2x_INT_UART4 17 +#define MX2x_INT_UART3 18 +#define MX2x_INT_UART2 19 +#define MX2x_INT_UART1 20 +#define MX2x_INT_KPP 21 +#define MX2x_INT_RTC 22 +#define MX2x_INT_PWM 23 +#define MX2x_INT_GPT3 24 +#define MX2x_INT_GPT2 25 +#define MX2x_INT_GPT1 26 +#define MX2x_INT_WDOG 27 +#define MX2x_INT_PCMCIA 28 +#define MX2x_INT_NANDFC 29 +#define MX2x_INT_CSI 31 +#define MX2x_INT_DMACH0 32 +#define MX2x_INT_DMACH1 33 +#define MX2x_INT_DMACH2 34 +#define MX2x_INT_DMACH3 35 +#define MX2x_INT_DMACH4 36 +#define MX2x_INT_DMACH5 37 +#define MX2x_INT_DMACH6 38 +#define MX2x_INT_DMACH7 39 +#define MX2x_INT_DMACH8 40 +#define MX2x_INT_DMACH9 41 +#define MX2x_INT_DMACH10 42 +#define MX2x_INT_DMACH11 43 +#define MX2x_INT_DMACH12 44 +#define MX2x_INT_DMACH13 45 +#define MX2x_INT_DMACH14 46 +#define MX2x_INT_DMACH15 47 +#define MX2x_INT_EMMAPRP 51 +#define MX2x_INT_EMMAPP 52 +#define MX2x_INT_SLCDC 60 +#define MX2x_INT_LCDC 61 /* fixed DMA request numbers */ -#define DMA_REQ_CSI_RX 31 -#define DMA_REQ_CSI_STAT 30 -#define DMA_REQ_UART1_TX 27 -#define DMA_REQ_UART1_RX 26 -#define DMA_REQ_UART2_TX 25 -#define DMA_REQ_UART2_RX 24 -#define DMA_REQ_UART3_TX 23 -#define DMA_REQ_UART3_RX 22 -#define DMA_REQ_UART4_TX 21 -#define DMA_REQ_UART4_RX 20 -#define DMA_REQ_CSPI1_TX 19 -#define DMA_REQ_CSPI1_RX 18 -#define DMA_REQ_CSPI2_TX 17 -#define DMA_REQ_CSPI2_RX 16 -#define DMA_REQ_SSI1_TX1 15 -#define DMA_REQ_SSI1_RX1 14 -#define DMA_REQ_SSI1_TX0 13 -#define DMA_REQ_SSI1_RX0 12 -#define DMA_REQ_SSI2_TX1 11 -#define DMA_REQ_SSI2_RX1 10 -#define DMA_REQ_SSI2_TX0 9 -#define DMA_REQ_SSI2_RX0 8 -#define DMA_REQ_SDHC1 7 -#define DMA_REQ_SDHC2 6 -#define DMA_REQ_EXT 3 -#define DMA_REQ_CSPI3_TX 2 -#define DMA_REQ_CSPI3_RX 1 +#define MX2x_DMA_REQ_CSPI3_RX 1 +#define MX2x_DMA_REQ_CSPI3_TX 2 +#define MX2x_DMA_REQ_EXT 3 +#define MX2x_DMA_REQ_SDHC2 6 +#define MX2x_DMA_REQ_SDHC1 7 +#define MX2x_DMA_REQ_SSI2_RX0 8 +#define MX2x_DMA_REQ_SSI2_TX0 9 +#define MX2x_DMA_REQ_SSI2_RX1 10 +#define MX2x_DMA_REQ_SSI2_TX1 11 +#define MX2x_DMA_REQ_SSI1_RX0 12 +#define MX2x_DMA_REQ_SSI1_TX0 13 +#define MX2x_DMA_REQ_SSI1_RX1 14 +#define MX2x_DMA_REQ_SSI1_TX1 15 +#define MX2x_DMA_REQ_CSPI2_RX 16 +#define MX2x_DMA_REQ_CSPI2_TX 17 +#define MX2x_DMA_REQ_CSPI1_RX 18 +#define MX2x_DMA_REQ_CSPI1_TX 19 +#define MX2x_DMA_REQ_UART4_RX 20 +#define MX2x_DMA_REQ_UART4_TX 21 +#define MX2x_DMA_REQ_UART3_RX 22 +#define MX2x_DMA_REQ_UART3_TX 23 +#define MX2x_DMA_REQ_UART2_RX 24 +#define MX2x_DMA_REQ_UART2_TX 25 +#define MX2x_DMA_REQ_UART1_RX 26 +#define MX2x_DMA_REQ_UART1_TX 27 +#define MX2x_DMA_REQ_CSI_STAT 30 +#define MX2x_DMA_REQ_CSI_RX 31 + +/* these should go away */ +#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR +#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT +#define AIPI_SIZE MX2x_AIPI_SIZE +#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR +#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR +#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR +#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR +#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR +#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR +#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR +#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR +#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR +#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR +#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR +#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR +#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR +#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR +#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR +#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR +#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR +#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR +#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR +#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR +#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR +#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR +#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR +#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR +#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR +#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR +#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR +#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR +#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR +#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR +#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR +#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR +#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR +#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT +#define SAHB1_SIZE MX2x_SAHB1_SIZE +#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR +#define MXC_INT_CSPI3 MX2x_INT_CSPI3 +#define MXC_INT_GPIO MX2x_INT_GPIO +#define MXC_INT_SDHC2 MX2x_INT_SDHC2 +#define MXC_INT_SDHC1 MX2x_INT_SDHC1 +#define MXC_INT_I2C MX2x_INT_I2C +#define MXC_INT_SSI2 MX2x_INT_SSI2 +#define MXC_INT_SSI1 MX2x_INT_SSI1 +#define MXC_INT_CSPI2 MX2x_INT_CSPI2 +#define MXC_INT_CSPI1 MX2x_INT_CSPI1 +#define MXC_INT_UART4 MX2x_INT_UART4 +#define MXC_INT_UART3 MX2x_INT_UART3 +#define MXC_INT_UART2 MX2x_INT_UART2 +#define MXC_INT_UART1 MX2x_INT_UART1 +#define MXC_INT_KPP MX2x_INT_KPP +#define MXC_INT_RTC MX2x_INT_RTC +#define MXC_INT_PWM MX2x_INT_PWM +#define MXC_INT_GPT3 MX2x_INT_GPT3 +#define MXC_INT_GPT2 MX2x_INT_GPT2 +#define MXC_INT_GPT1 MX2x_INT_GPT1 +#define MXC_INT_WDOG MX2x_INT_WDOG +#define MXC_INT_PCMCIA MX2x_INT_PCMCIA +#define MXC_INT_NANDFC MX2x_INT_NANDFC +#define MXC_INT_CSI MX2x_INT_CSI +#define MXC_INT_DMACH0 MX2x_INT_DMACH0 +#define MXC_INT_DMACH1 MX2x_INT_DMACH1 +#define MXC_INT_DMACH2 MX2x_INT_DMACH2 +#define MXC_INT_DMACH3 MX2x_INT_DMACH3 +#define MXC_INT_DMACH4 MX2x_INT_DMACH4 +#define MXC_INT_DMACH5 MX2x_INT_DMACH5 +#define MXC_INT_DMACH6 MX2x_INT_DMACH6 +#define MXC_INT_DMACH7 MX2x_INT_DMACH7 +#define MXC_INT_DMACH8 MX2x_INT_DMACH8 +#define MXC_INT_DMACH9 MX2x_INT_DMACH9 +#define MXC_INT_DMACH10 MX2x_INT_DMACH10 +#define MXC_INT_DMACH11 MX2x_INT_DMACH11 +#define MXC_INT_DMACH12 MX2x_INT_DMACH12 +#define MXC_INT_DMACH13 MX2x_INT_DMACH13 +#define MXC_INT_DMACH14 MX2x_INT_DMACH14 +#define MXC_INT_DMACH15 MX2x_INT_DMACH15 +#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP +#define MXC_INT_EMMAPP MX2x_INT_EMMAPP +#define MXC_INT_SLCDC MX2x_INT_SLCDC +#define MXC_INT_LCDC MX2x_INT_LCDC +#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX +#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX +#define DMA_REQ_EXT MX2x_DMA_REQ_EXT +#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2 +#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1 +#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0 +#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0 +#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1 +#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1 +#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0 +#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0 +#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1 +#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1 +#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX +#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX +#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX +#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX +#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX +#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX +#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX +#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX +#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX +#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX +#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX +#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX +#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT +#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX #endif /* __ASM_ARCH_MXC_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 14ac0dcc82f..b8b47d139eb 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,45 +1,218 @@ /* * IRAM */ -#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ +#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */ #define MX31_IRAM_SIZE SZ_16K -#define MX31_OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) -#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) -#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) +#define MX31_L2CC_BASE_ADDR 0x30000000 +#define MX31_L2CC_SIZE SZ_1M -#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) -#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) -#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) +#define MX31_AIPS1_BASE_ADDR 0x43f00000 +#define MX31_AIPS1_BASE_ADDR_VIRT 0xfc000000 +#define MX31_AIPS1_SIZE SZ_1M +#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000) +#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000) +#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000) +#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) +#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) +#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) +#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) +#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) +#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) +#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) +#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000) +#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000) +#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000) +#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000) +#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000) +#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000) +#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000) +#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000) +#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000) +#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000) -#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) -#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) -#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) +#define MX31_SPBA0_BASE_ADDR 0x50000000 +#define MX31_SPBA0_BASE_ADDR_VIRT 0xfc100000 +#define MX31_SPBA0_SIZE SZ_1M +#define MX31_MMC_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) +#define MX31_MMC_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) +#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000) +#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000) +#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000) +#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000) +#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000) +#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000) +#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000) +#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000) -#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) +#define MX31_AIPS2_BASE_ADDR 0x53f00000 +#define MX31_AIPS2_BASE_ADDR_VIRT 0xfc200000 +#define MX31_AIPS2_SIZE SZ_1M +#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000) +#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000) +#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000) +#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000) +#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000) +#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000) +#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000) +#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000) +#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000) +#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000) +#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000) +#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000) +#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000) +#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000) +#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000) +#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000) +#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000) +#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000) +#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000) +#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000) +#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000) -#define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_FIRI 7 +#define MX31_ROMP_BASE_ADDR 0x60000000 +#define MX31_ROMP_BASE_ADDR_VIRT 0xfc500000 +#define MX31_ROMP_SIZE SZ_1M + +#define MX31_AVIC_BASE_ADDR 0x68000000 +#define MX31_AVIC_BASE_ADDR_VIRT 0xfc400000 +#define MX31_AVIC_SIZE SZ_1M + +#define MX31_IPU_MEM_BASE_ADDR 0x70000000 +#define MX31_CSD0_BASE_ADDR 0x80000000 +#define MX31_CSD1_BASE_ADDR 0x90000000 + +#define MX31_CS0_BASE_ADDR 0xa0000000 +#define MX31_CS1_BASE_ADDR 0xa8000000 +#define MX31_CS2_BASE_ADDR 0xb0000000 +#define MX31_CS3_BASE_ADDR 0xb2000000 + +#define MX31_CS4_BASE_ADDR 0xb4000000 +#define MX31_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX31_CS4_SIZE SZ_32M + +#define MX31_CS5_BASE_ADDR 0xb6000000 +#define MX31_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX31_CS5_SIZE SZ_32M + +#define MX31_X_MEMC_BASE_ADDR 0xb8000000 +#define MX31_X_MEMC_BASE_ADDR_VIRT 0xfc320000 +#define MX31_X_MEMC_SIZE SZ_64K +#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000) +#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000) +#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000) +#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000) +#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) +#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR + +#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +#define MX31_INT_I2C3 3 +#define MX31_INT_I2C2 4 +#define MX31_INT_MPEG4_ENCODER 5 +#define MX31_INT_RTIC 6 +#define MX31_INT_FIRI 7 #define MX31_INT_MMC_SDHC2 8 -#define MXC_INT_MMC_SDHC1 9 +#define MX31_INT_MMC_SDHC1 9 +#define MX31_INT_I2C 10 #define MX31_INT_SSI2 11 #define MX31_INT_SSI1 12 -#define MXC_INT_MBX 16 -#define MXC_INT_CSPI3 17 -#define MXC_INT_SIM2 20 -#define MXC_INT_SIM1 21 -#define MXC_INT_CCM_DVFS 31 -#define MXC_INT_USB1 35 -#define MXC_INT_USB2 36 -#define MXC_INT_USB3 37 -#define MXC_INT_USB4 38 -#define MXC_INT_MSHC2 40 -#define MXC_INT_UART4 46 -#define MXC_INT_UART5 47 -#define MXC_INT_CCM 53 -#define MXC_INT_PCMCIA 54 +#define MX31_INT_CSPI2 13 +#define MX31_INT_CSPI1 14 +#define MX31_INT_ATA 15 +#define MX31_INT_MBX 16 +#define MX31_INT_CSPI3 17 +#define MX31_INT_UART3 18 +#define MX31_INT_IIM 19 +#define MX31_INT_SIM2 20 +#define MX31_INT_SIM1 21 +#define MX31_INT_RNGA 22 +#define MX31_INT_EVTMON 23 +#define MX31_INT_KPP 24 +#define MX31_INT_RTC 25 +#define MX31_INT_PWM 26 +#define MX31_INT_EPIT2 27 +#define MX31_INT_EPIT1 28 +#define MX31_INT_GPT 29 +#define MX31_INT_POWER_FAIL 30 +#define MX31_INT_CCM_DVFS 31 +#define MX31_INT_UART2 32 +#define MX31_INT_NANDFC 33 +#define MX31_INT_SDMA 34 +#define MX31_INT_USB1 35 +#define MX31_INT_USB2 36 +#define MX31_INT_USB3 37 +#define MX31_INT_USB4 38 +#define MX31_INT_MSHC1 39 +#define MX31_INT_MSHC2 40 +#define MX31_INT_IPU_ERR 41 +#define MX31_INT_IPU_SYN 42 +#define MX31_INT_UART1 45 +#define MX31_INT_UART4 46 +#define MX31_INT_UART5 47 +#define MX31_INT_ECT 48 +#define MX31_INT_SCC_SCM 49 +#define MX31_INT_SCC_SMN 50 +#define MX31_INT_GPIO2 51 +#define MX31_INT_GPIO1 52 +#define MX31_INT_CCM 53 +#define MX31_INT_PCMCIA 54 +#define MX31_INT_WDOG 55 +#define MX31_INT_GPIO3 56 +#define MX31_INT_EXT_POWER 58 +#define MX31_INT_EXT_TEMPER 59 +#define MX31_INT_EXT_SENSOR60 60 +#define MX31_INT_EXT_SENSOR61 61 +#define MX31_INT_EXT_WDOG 62 +#define MX31_INT_EXT_TV 63 + +#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ + +/* silicon revisions specific to i.MX31 */ +#define MX31_CHIP_REV_1_0 0x10 +#define MX31_CHIP_REV_1_1 0x11 +#define MX31_CHIP_REV_1_2 0x12 +#define MX31_CHIP_REV_1_3 0x13 +#define MX31_CHIP_REV_2_0 0x20 +#define MX31_CHIP_REV_2_1 0x21 +#define MX31_CHIP_REV_2_2 0x22 +#define MX31_CHIP_REV_2_3 0x23 +#define MX31_CHIP_REV_3_0 0x30 +#define MX31_CHIP_REV_3_1 0x31 +#define MX31_CHIP_REV_3_2 0x32 + +#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0 +#define MX31_SYSTEM_REV_NUM 3 +/* these should go away */ +#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR +#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR +#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR +#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR +#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR +#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR +#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR +#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR +#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR +#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR +#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR +#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR +#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER +#define MXC_INT_FIRI MX31_INT_FIRI +#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1 +#define MXC_INT_MBX MX31_INT_MBX +#define MXC_INT_CSPI3 MX31_INT_CSPI3 +#define MXC_INT_SIM2 MX31_INT_SIM2 +#define MXC_INT_SIM1 MX31_INT_SIM1 +#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS +#define MXC_INT_USB1 MX31_INT_USB1 +#define MXC_INT_USB2 MX31_INT_USB2 +#define MXC_INT_USB3 MX31_INT_USB3 +#define MXC_INT_USB4 MX31_INT_USB4 +#define MXC_INT_MSHC2 MX31_INT_MSHC2 +#define MXC_INT_UART4 MX31_INT_UART4 +#define MXC_INT_UART5 MX31_INT_UART5 +#define MXC_INT_CCM MX31_INT_CCM +#define MXC_INT_PCMCIA MX31_INT_PCMCIA diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index ab4cfec6c8a..af871bce35b 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -2,29 +2,196 @@ * IRAM */ #define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ -#define MX35_IRAM_SIZE SZ_128K +#define MX35_IRAM_SIZE SZ_128K -#define MXC_FEC_BASE_ADDR 0x50038000 -#define MX35_OTG_BASE_ADDR 0x53ff4000 -#define MX35_NFC_BASE_ADDR 0xBB000000 +#define MX35_L2CC_BASE_ADDR 0x30000000 +#define MX35_L2CC_SIZE SZ_1M + +#define MX35_AIPS1_BASE_ADDR 0x43f00000 +#define MX35_AIPS1_BASE_ADDR_VIRT 0xfc000000 +#define MX35_AIPS1_SIZE SZ_1M +#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000) +#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000) +#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000) +#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) +#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) +#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) +#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) +#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) +#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) +#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000) +#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000) +#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000) +#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000) +#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000) +#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000) +#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000) +#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000) + +#define MX35_SPBA0_BASE_ADDR 0x50000000 +#define MX35_SPBA0_BASE_ADDR_VIRT 0xfc100000 +#define MX35_SPBA0_SIZE SZ_1M +#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000) +#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000) +#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000) +#define MX35_ATA_DMA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000) +#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000) +#define MX35_FEC_BASE_ADDR 0x50038000 +#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000) + +#define MX35_AIPS2_BASE_ADDR 0x53f00000 +#define MX35_AIPS2_BASE_ADDR_VIRT 0xfc200000 +#define MX35_AIPS2_SIZE SZ_1M +#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000) +#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000) +#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000) +#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000) +#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) +#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) +#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) +#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) +#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) +#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000) +#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000) +#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) +#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) +#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) +#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_OTG_BASE_ADDR 0x53ff4000 + +#define MX35_ROMP_BASE_ADDR 0x60000000 +#define MX35_ROMP_BASE_ADDR_VIRT 0xfc500000 +#define MX35_ROMP_SIZE SZ_1M + +#define MX35_AVIC_BASE_ADDR 0x68000000 +#define MX35_AVIC_BASE_ADDR_VIRT 0xfc400000 +#define MX35_AVIC_SIZE SZ_1M + +/* + * Memory regions and CS + */ +#define MX35_IPU_MEM_BASE_ADDR 0x70000000 +#define MX35_CSD0_BASE_ADDR 0x80000000 +#define MX35_CSD1_BASE_ADDR 0x90000000 + +#define MX35_CS0_BASE_ADDR 0xa0000000 +#define MX35_CS1_BASE_ADDR 0xa8000000 +#define MX35_CS2_BASE_ADDR 0xb0000000 +#define MX35_CS3_BASE_ADDR 0xb2000000 + +#define MX35_CS4_BASE_ADDR 0xb4000000 +#define MX35_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX35_CS4_SIZE SZ_32M + +#define MX35_CS5_BASE_ADDR 0xb6000000 +#define MX35_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX35_CS5_SIZE SZ_32M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MX35_X_MEMC_BASE_ADDR 0xb8000000 +#define MX35_X_MEMC_BASE_ADDR_VIRT 0xfc320000 +#define MX35_X_MEMC_SIZE SZ_64K +#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000) +#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000) +#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000) +#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000) +#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR + +#define MX35_NFC_BASE_ADDR 0xbb000000 +#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 /* * Interrupt numbers */ -#define MXC_INT_OWIRE 2 +#define MX35_INT_OWIRE 2 +#define MX35_INT_I2C3 3 +#define MX35_INT_I2C2 4 +#define MX35_INT_RTIC 6 #define MX35_INT_MMC_SDHC1 7 -#define MXC_INT_MMC_SDHC2 8 -#define MXC_INT_MMC_SDHC3 9 +#define MX35_INT_MMC_SDHC2 8 +#define MX35_INT_MMC_SDHC3 9 +#define MX35_INT_I2C 10 #define MX35_INT_SSI1 11 #define MX35_INT_SSI2 12 -#define MXC_INT_GPU2D 16 -#define MXC_INT_ASRC 17 -#define MXC_INT_USBHS 35 -#define MXC_INT_USBOTG 37 -#define MXC_INT_ESAI 40 -#define MXC_INT_CAN1 43 -#define MXC_INT_CAN2 44 -#define MXC_INT_MLB 46 -#define MXC_INT_SPDIF 47 -#define MXC_INT_FEC 57 +#define MX35_INT_CSPI2 13 +#define MX35_INT_CSPI1 14 +#define MX35_INT_ATA 15 +#define MX35_INT_GPU2D 16 +#define MX35_INT_ASRC 17 +#define MX35_INT_UART3 18 +#define MX35_INT_IIM 19 +#define MX35_INT_RNGA 22 +#define MX35_INT_EVTMON 23 +#define MX35_INT_KPP 24 +#define MX35_INT_RTC 25 +#define MX35_INT_PWM 26 +#define MX35_INT_EPIT2 27 +#define MX35_INT_EPIT1 28 +#define MX35_INT_GPT 29 +#define MX35_INT_POWER_FAIL 30 +#define MX35_INT_UART2 32 +#define MX35_INT_NANDFC 33 +#define MX35_INT_SDMA 34 +#define MX35_INT_USBHS 35 +#define MX35_INT_USBOTG 37 +#define MX35_INT_MSHC1 39 +#define MX35_INT_ESAI 40 +#define MX35_INT_IPU_ERR 41 +#define MX35_INT_IPU_SYN 42 +#define MX35_INT_CAN1 43 +#define MX35_INT_CAN2 44 +#define MX35_INT_UART1 45 +#define MX35_INT_MLB 46 +#define MX35_INT_SPDIF 47 +#define MX35_INT_ECT 48 +#define MX35_INT_SCC_SCM 49 +#define MX35_INT_SCC_SMN 50 +#define MX35_INT_GPIO2 51 +#define MX35_INT_GPIO1 52 +#define MX35_INT_WDOG 55 +#define MX35_INT_GPIO3 56 +#define MX35_INT_FEC 57 +#define MX35_INT_EXT_POWER 58 +#define MX35_INT_EXT_TEMPER 59 +#define MX35_INT_EXT_SENSOR60 60 +#define MX35_INT_EXT_SENSOR61 61 +#define MX35_INT_EXT_WDOG 62 +#define MX35_INT_EXT_TV 63 + +#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ + +/* silicon revisions specific to i.MX31 */ +#define MX35_CHIP_REV_1_0 0x10 +#define MX35_CHIP_REV_1_1 0x11 +#define MX35_CHIP_REV_1_2 0x12 +#define MX35_CHIP_REV_1_3 0x13 +#define MX35_CHIP_REV_2_0 0x20 +#define MX35_CHIP_REV_2_1 0x21 +#define MX35_CHIP_REV_2_2 0x22 +#define MX35_CHIP_REV_2_3 0x23 +#define MX35_CHIP_REV_3_0 0x30 +#define MX35_CHIP_REV_3_1 0x31 +#define MX35_CHIP_REV_3_2 0x32 + +#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 +#define MX35_SYSTEM_REV_NUM 3 +/* these should go away */ +#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR +#define MXC_INT_OWIRE MX35_INT_OWIRE +#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2 +#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3 +#define MXC_INT_GPU2D MX35_INT_GPU2D +#define MXC_INT_ASRC MX35_INT_ASRC +#define MXC_INT_USBHS MX35_INT_USBHS +#define MXC_INT_USBOTG MX35_INT_USBOTG +#define MXC_INT_ESAI MX35_INT_ESAI +#define MXC_INT_CAN1 MX35_INT_CAN1 +#define MXC_INT_CAN2 MX35_INT_CAN2 +#define MXC_INT_MLB MX35_INT_MLB +#define MXC_INT_SPDIF MX35_INT_SPDIF +#define MXC_INT_FEC MX35_INT_FEC diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 009f4440276..be69272407a 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -34,120 +34,117 @@ * C0000000 64M PCMCIA/CF */ -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define CS5_BASE_ADDR_VIRT 0xF6000000 -#define CS5_SIZE SZ_32M - -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - /* * L2CC */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_SIZE SZ_1M +#define MX3x_L2CC_BASE_ADDR 0x30000000 +#define MX3x_L2CC_SIZE SZ_1M /* * AIPS 1 */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M - -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) +#define MX3x_AIPS1_BASE_ADDR 0x43f00000 +#define MX3x_AIPS1_BASE_ADDR_VIRT 0xfc000000 +#define MX3x_AIPS1_SIZE SZ_1M +#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000) +#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000) +#define MX3x_CLKCTL_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x0c000) +#define MX3x_ETB_SLOT4_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x10000) +#define MX3x_ETB_SLOT5_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x14000) +#define MX3x_ECT_CTIO_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x18000) +#define MX3x_I2C_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x80000) +#define MX3x_I2C3_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x84000) +#define MX3x_UART1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x90000) +#define MX3x_UART2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x94000) +#define MX3x_I2C2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x98000) +#define MX3x_OWIRE_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x9c000) +#define MX3x_SSI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa0000) +#define MX3x_CSPI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa4000) +#define MX3x_KPP_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa8000) +#define MX3x_IOMUXC_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xac000) +#define MX3x_ECT_IP1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xb8000) +#define MX3x_ECT_IP2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xbc000) /* * SPBA global module enabled #0 */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M - -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) +#define MX3x_SPBA0_BASE_ADDR 0x50000000 +#define MX3x_SPBA0_BASE_ADDR_VIRT 0xfc100000 +#define MX3x_SPBA0_SIZE SZ_1M +#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000) +#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000) +#define MX3x_SSI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x14000) +#define MX3x_ATA_DMA_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x20000) +#define MX3x_MSHC1_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x24000) +#define MX3x_SPBA_CTRL_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x3c000) /* * AIPS 2 */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) +#define MX3x_AIPS2_BASE_ADDR 0x53f00000 +#define MX3x_AIPS2_BASE_ADDR_VIRT 0xfc200000 +#define MX3x_AIPS2_SIZE SZ_1M +#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000) +#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000) +#define MX3x_EPIT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x94000) +#define MX3x_EPIT2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x98000) +#define MX3x_GPIO3_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xa4000) +#define MX3x_SCC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xac000) +#define MX3x_RNGA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xb0000) +#define MX3x_IPU_CTRL_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc0000) +#define MX3x_AUDMUX_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc4000) +#define MX3x_GPIO1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xcc000) +#define MX3x_GPIO2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd0000) +#define MX3x_SDMA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd4000) +#define MX3x_RTC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd8000) +#define MX3x_WDOG_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xdc000) +#define MX3x_PWM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xe0000) +#define MX3x_RTIC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xec000) /* * ROMP and AVIC */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M +#define MX3x_ROMP_BASE_ADDR 0x60000000 +#define MX3x_ROMP_BASE_ADDR_VIRT 0xfc500000 +#define MX3x_ROMP_SIZE SZ_1M -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M +#define MX3x_AVIC_BASE_ADDR 0x68000000 +#define MX3x_AVIC_BASE_ADDR_VIRT 0xfc400000 +#define MX3x_AVIC_SIZE SZ_1M /* - * NAND, SDRAM, WEIM, M3IF, EMI controllers + * Memory regions and CS */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K +#define MX3x_IPU_MEM_BASE_ADDR 0x70000000 +#define MX3x_CSD0_BASE_ADDR 0x80000000 +#define MX3x_CSD1_BASE_ADDR 0x90000000 -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR +#define MX3x_CS0_BASE_ADDR 0xa0000000 +#define MX3x_CS1_BASE_ADDR 0xa8000000 +#define MX3x_CS2_BASE_ADDR 0xb0000000 +#define MX3x_CS3_BASE_ADDR 0xb2000000 + +#define MX3x_CS4_BASE_ADDR 0xb4000000 +#define MX3x_CS4_BASE_ADDR_VIRT 0xf4000000 +#define MX3x_CS4_SIZE SZ_32M + +#define MX3x_CS5_BASE_ADDR 0xb6000000 +#define MX3x_CS5_BASE_ADDR_VIRT 0xf6000000 +#define MX3x_CS5_SIZE SZ_32M /* - * Memory regions and CS + * NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 +#define MX3x_X_MEMC_BASE_ADDR 0xb8000000 +#define MX3x_X_MEMC_BASE_ADDR_VIRT 0xfc320000 +#define MX3x_X_MEMC_SIZE SZ_64K +#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000) +#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000) +#define MX3x_M3IF_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x3000) +#define MX3x_EMI_CTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x4000) +#define MX3x_PCMCIA_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR + +#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000 /*! * This macro defines the physical to virtual address mapping for all the @@ -202,74 +199,207 @@ /* * Interrupt numbers */ -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 -#define MXC_INT_RTIC 6 -#define MXC_INT_I2C 10 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_POWER_FAIL 30 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 -#define MXC_INT_MSHC1 39 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_UART1 45 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 - -#define PROD_SIGNATURE 0x1 /* For MX31 */ +#define MX3x_INT_I2C3 3 +#define MX3x_INT_I2C2 4 +#define MX3x_INT_RTIC 6 +#define MX3x_INT_I2C 10 +#define MX3x_INT_CSPI2 13 +#define MX3x_INT_CSPI1 14 +#define MX3x_INT_ATA 15 +#define MX3x_INT_UART3 18 +#define MX3x_INT_IIM 19 +#define MX3x_INT_RNGA 22 +#define MX3x_INT_EVTMON 23 +#define MX3x_INT_KPP 24 +#define MX3x_INT_RTC 25 +#define MX3x_INT_PWM 26 +#define MX3x_INT_EPIT2 27 +#define MX3x_INT_EPIT1 28 +#define MX3x_INT_GPT 29 +#define MX3x_INT_POWER_FAIL 30 +#define MX3x_INT_UART2 32 +#define MX3x_INT_NANDFC 33 +#define MX3x_INT_SDMA 34 +#define MX3x_INT_MSHC1 39 +#define MX3x_INT_IPU_ERR 41 +#define MX3x_INT_IPU_SYN 42 +#define MX3x_INT_UART1 45 +#define MX3x_INT_ECT 48 +#define MX3x_INT_SCC_SCM 49 +#define MX3x_INT_SCC_SMN 50 +#define MX3x_INT_GPIO2 51 +#define MX3x_INT_GPIO1 52 +#define MX3x_INT_WDOG 55 +#define MX3x_INT_GPIO3 56 +#define MX3x_INT_EXT_POWER 58 +#define MX3x_INT_EXT_TEMPER 59 +#define MX3x_INT_EXT_SENSOR60 60 +#define MX3x_INT_EXT_SENSOR61 61 +#define MX3x_INT_EXT_WDOG 62 +#define MX3x_INT_EXT_TV 63 + +#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 +#define MX3x_CHIP_REV_1_0 0x10 +#define MX3x_CHIP_REV_1_1 0x11 +#define MX3x_CHIP_REV_1_2 0x12 +#define MX3x_CHIP_REV_1_3 0x13 +#define MX3x_CHIP_REV_2_0 0x20 +#define MX3x_CHIP_REV_2_1 0x21 +#define MX3x_CHIP_REV_2_2 0x22 +#define MX3x_CHIP_REV_2_3 0x23 +#define MX3x_CHIP_REV_3_0 0x30 +#define MX3x_CHIP_REV_3_1 0x31 +#define MX3x_CHIP_REV_3_2 0x32 + +#define MX3x_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 +#define MX3x_SYSTEM_REV_NUM 3 /* Mandatory defines used globally */ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern unsigned int system_rev; +extern unsigned int mx31_cpu_rev; +extern void mx31_read_cpu_rev(void); static inline int mx31_revision(void) { - return system_rev; + return mx31_cpu_rev; } #endif -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +/* these should go away */ +#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR +#define L2CC_SIZE MX3x_L2CC_SIZE +#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR +#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT +#define AIPS1_SIZE MX3x_AIPS1_SIZE +#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR +#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR +#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR +#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR +#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR +#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR +#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR +#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR +#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR +#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR +#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR +#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR +#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR +#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR +#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR +#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR +#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR +#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR +#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT +#define SPBA0_SIZE MX3x_SPBA0_SIZE +#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR +#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR +#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR +#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR +#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR +#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR +#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR +#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT +#define AIPS2_SIZE MX3x_AIPS2_SIZE +#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR +#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR +#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR +#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR +#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR +#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR +#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR +#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR +#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR +#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR +#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR +#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR +#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR +#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR +#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR +#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR +#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR +#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT +#define ROMP_SIZE MX3x_ROMP_SIZE +#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR +#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT +#define AVIC_SIZE MX3x_AVIC_SIZE +#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR +#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR +#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR +#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR +#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR +#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR +#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR +#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR +#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT +#define CS4_SIZE MX3x_CS4_SIZE +#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR +#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT +#define CS5_SIZE MX3x_CS5_SIZE +#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR +#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT +#define X_MEMC_SIZE MX3x_X_MEMC_SIZE +#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR +#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR +#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR +#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR +#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR +#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR +#define MXC_INT_I2C3 MX3x_INT_I2C3 +#define MXC_INT_I2C2 MX3x_INT_I2C2 +#define MXC_INT_RTIC MX3x_INT_RTIC +#define MXC_INT_I2C MX3x_INT_I2C +#define MXC_INT_CSPI2 MX3x_INT_CSPI2 +#define MXC_INT_CSPI1 MX3x_INT_CSPI1 +#define MXC_INT_ATA MX3x_INT_ATA +#define MXC_INT_UART3 MX3x_INT_UART3 +#define MXC_INT_IIM MX3x_INT_IIM +#define MXC_INT_RNGA MX3x_INT_RNGA +#define MXC_INT_EVTMON MX3x_INT_EVTMON +#define MXC_INT_KPP MX3x_INT_KPP +#define MXC_INT_RTC MX3x_INT_RTC +#define MXC_INT_PWM MX3x_INT_PWM +#define MXC_INT_EPIT2 MX3x_INT_EPIT2 +#define MXC_INT_EPIT1 MX3x_INT_EPIT1 +#define MXC_INT_GPT MX3x_INT_GPT +#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL +#define MXC_INT_UART2 MX3x_INT_UART2 +#define MXC_INT_NANDFC MX3x_INT_NANDFC +#define MXC_INT_SDMA MX3x_INT_SDMA +#define MXC_INT_MSHC1 MX3x_INT_MSHC1 +#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR +#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN +#define MXC_INT_UART1 MX3x_INT_UART1 +#define MXC_INT_ECT MX3x_INT_ECT +#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM +#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN +#define MXC_INT_GPIO2 MX3x_INT_GPIO2 +#define MXC_INT_GPIO1 MX3x_INT_GPIO1 +#define MXC_INT_WDOG MX3x_INT_WDOG +#define MXC_INT_GPIO3 MX3x_INT_GPIO3 +#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER +#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER +#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60 +#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61 +#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG +#define MXC_INT_EXT_TV MX3x_INT_EXT_TV +#define PROD_SIGNATURE MX3x_PROD_SIGNATURE +#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0 +#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1 +#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2 +#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3 +#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0 +#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1 +#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2 +#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3 +#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0 +#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1 +#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 +#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN +#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM +#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h new file mode 100644 index 00000000000..96b6ab4c40c --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ulpi.h @@ -0,0 +1,7 @@ +#ifndef __MACH_ULPI_H +#define __MACH_ULPI_H + +extern struct otg_io_access_ops mxc_ulpi_access_ops; + +#endif /* __MACH_ULPI_H */ + diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 082a3908256..4d5d395ad63 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -83,6 +83,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX27ADS: case MACH_TYPE_PCM038: case MACH_TYPE_MX21ADS: + case MACH_TYPE_PCA100: + case MACH_TYPE_MXT_TD60: uart_base = MX2X_UART1_BASE_ADDR; break; case MACH_TYPE_MX31LITE: @@ -94,6 +96,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX31ADS: case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: + case MACH_TYPE_LILLY1131: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c index 851ca99bf1b..b318c6a222d 100644 --- a/arch/arm/plat-mxc/iomux-v3.c +++ b/arch/arm/plat-mxc/iomux-v3.c @@ -31,19 +31,11 @@ static void __iomem *base; -static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG]; - /* - * setups a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration + * setups a single pad in the iomuxer */ int mxc_iomux_v3_setup_pad(struct pad_desc *pad) { - unsigned int pad_ofs = pad->pad_ctrl_ofs; - - if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map)) - return -EBUSY; if (pad->mux_ctrl_ofs) __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs); @@ -66,37 +58,13 @@ int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count) for (i = 0; i < count; i++) { ret = mxc_iomux_v3_setup_pad(p); if (ret) - goto setup_error; + return ret; p++; } return 0; - -setup_error: - mxc_iomux_v3_release_multiple_pads(pad_list, i); - return ret; } EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); -void mxc_iomux_v3_release_pad(struct pad_desc *pad) -{ - unsigned int pad_ofs = pad->pad_ctrl_ofs; - - clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map); -} -EXPORT_SYMBOL(mxc_iomux_v3_release_pad); - -void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count) -{ - struct pad_desc *p = pad_list; - int i; - - for (i = 0; i < count; i++) { - mxc_iomux_v3_release_pad(p); - p++; - } -} -EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads); - void mxc_iomux_v3_init(void __iomem *iomux_v3_base) { base = iomux_v3_base; diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c new file mode 100644 index 00000000000..582c6dfaba4 --- /dev/null +++ b/arch/arm/plat-mxc/ulpi.c @@ -0,0 +1,113 @@ +/* + * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> + +#include <mach/ulpi.h> + +/* ULPIVIEW register bits */ +#define ULPIVW_WU (1 << 31) /* Wakeup */ +#define ULPIVW_RUN (1 << 30) /* read/write run */ +#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */ +#define ULPIVW_SS (1 << 27) /* SyncState */ +#define ULPIVW_PORT_MASK 0x07 /* Port field */ +#define ULPIVW_PORT_SHIFT 24 +#define ULPIVW_ADDR_MASK 0xff /* data address field */ +#define ULPIVW_ADDR_SHIFT 16 +#define ULPIVW_RDATA_MASK 0xff /* read data field */ +#define ULPIVW_RDATA_SHIFT 8 +#define ULPIVW_WDATA_MASK 0xff /* write data field */ +#define ULPIVW_WDATA_SHIFT 0 + +static int ulpi_poll(void __iomem *view, u32 bit) +{ + int timeout = 10000; + + while (timeout--) { + u32 data = __raw_readl(view); + + if (!(data & bit)) + return 0; + + cpu_relax(); + }; + + printk(KERN_WARNING "timeout polling for ULPI device\n"); + + return -ETIMEDOUT; +} + +static int ulpi_read(struct otg_transceiver *otg, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + /* make sure interface is running */ + if (!(__raw_readl(view) & ULPIVW_SS)) { + __raw_writel(ULPIVW_WU, view); + + /* wait for wakeup */ + ret = ulpi_poll(view, ULPIVW_WU); + if (ret) + return ret; + } + + /* read the register */ + __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view); + + /* wait for completion */ + ret = ulpi_poll(view, ULPIVW_RUN); + if (ret) + return ret; + + return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; +} + +static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + /* make sure the interface is running */ + if (!(__raw_readl(view) & ULPIVW_SS)) { + __raw_writel(ULPIVW_WU, view); + /* wait for wakeup */ + ret = ulpi_poll(view, ULPIVW_WU); + if (ret) + return ret; + } + + __raw_writel((ULPIVW_RUN | ULPIVW_WRITE | + (reg << ULPIVW_ADDR_SHIFT) | + ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view); + + /* wait for completion */ + return ulpi_poll(view, ULPIVW_RUN); +} + +struct otg_io_access_ops mxc_ulpi_access_ops = { + .read = ulpi_read, + .write = ulpi_write, +}; +EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); + diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h index 3478eae32d8..3478eae32d8 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 8931c5f0e46..e139a72c214 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -159,6 +159,12 @@ config S3C_GPIO_CFG_S3C64XX Internal configuration to enable S3C64XX style GPIO configuration functions. +config S5P_GPIO_CFG_S5PC1XX + bool + help + Internal configuration to enable S5PC1XX style GPIO configuration + functions. + # DMA config S3C_DMA @@ -178,6 +184,11 @@ config S3C_DEV_HSMMC1 help Compile in platform device definitions for HSMMC channel 1 +config S3C_DEV_HSMMC2 + bool + help + Compile in platform device definitions for HSMMC channel 2 + config S3C_DEV_I2C1 bool help diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 3c09109e9e8..50444da9842 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index 4d01ef1a25d..619cfa82dca 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/clock.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX Core clock control support @@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks) int __init s3c24xx_register_baseclocks(unsigned long xtal) { - printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n"); clk_xtal.rate = xtal; diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c new file mode 100644 index 00000000000..824580bc0e0 --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc2.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc2.c + * + * Copyright (c) 2009 Samsung Electronics + * Copyright (c) 2009 Maurus Cuelenaere + * + * Based on arch/arm/plat-s3c/dev-hsmmc1.c + * original file Copyright (c) 2008 Simtec Electronics + * + * S3C series device definition for hsmmc device 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc2_resource[] = { + [0] = { + .start = S3C_PA_HSMMC2, + .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC2, + .end = IRQ_HSMMC2, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc2 = { + .name = "s3c-sdhci", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), + .resource = s3c_hsmmc2_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc2_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc2_def_platdata, + }, +}; + +void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c index 428372868fb..4c761529b94 100644 --- a/arch/arm/plat-s3c/dev-i2c0.c +++ b/arch/arm/plat-s3c/dev-i2c0.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c0.c * - * Copyright 2008,2009 Simtec Electronics + * Copyright 2008-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c index 8349c462788..d44f7911050 100644 --- a/arch/arm/plat-s3c/dev-i2c1.c +++ b/arch/arm/plat-s3c/dev-i2c1.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c1.c * - * Copyright 2008,2009 Simtec Electronics + * Copyright 2008-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index 4e532373243..e771e77dcd5 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -9,8 +9,12 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + #include <mach/map.h> #include <plat/devs.h> +#include <plat/nand.h> static struct resource s3c_nand_resource[] = { [0] = { @@ -28,3 +32,96 @@ struct platform_device s3c_device_nand = { }; EXPORT_SYMBOL(s3c_device_nand); + +/** + * s3c_nand_copy_set() - copy nand set data + * @set: The new structure, directly copied from the old. + * + * Copy all the fields from the NAND set field from what is probably __initdata + * to new kernel memory. The code returns 0 if the copy happened correctly or + * an error code for the calling function to display. + * + * Note, we currently do not try and look to see if we've already copied the + * data in a previous set. + */ +static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) +{ + void *ptr; + int size; + + size = sizeof(struct mtd_partition) * set->nr_partitions; + if (size) { + ptr = kmemdup(set->partitions, size, GFP_KERNEL); + set->partitions = ptr; + + if (!ptr) + return -ENOMEM; + } + + size = sizeof(int) * set->nr_chips; + if (size) { + ptr = kmemdup(set->nr_map, size, GFP_KERNEL); + set->nr_map = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->ecc_layout) { + ptr = kmemdup(set->ecc_layout, + sizeof(struct nand_ecclayout), GFP_KERNEL); + set->ecc_layout = ptr; + + if (!ptr) + return -ENOMEM; + } + + return 0; +} + +void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) +{ + struct s3c2410_platform_nand *npd; + int size; + int ret; + + /* note, if we get a failure in allocation, we simply drop out of the + * function. If there is so little memory available at initialisation + * time then there is little chance the system is going to run. + */ + + npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL); + if (!npd) { + printk(KERN_ERR "%s: failed copying platform data\n", __func__); + return; + } + + /* now see if we need to copy any of the nand set data */ + + size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; + if (size) { + struct s3c2410_nand_set *from = npd->sets; + struct s3c2410_nand_set *to; + int i; + + to = kmemdup(from, size, GFP_KERNEL); + npd->sets = to; /* set, even if we failed */ + + if (!to) { + printk(KERN_ERR "%s: no memory for sets\n", __func__); + return; + } + + for (i = 0; i < npd->nr_sets; i++) { + ret = s3c_nand_copy_set(to); + if (!ret) { + printk(KERN_ERR "%s: failed to copy set %d\n", + __func__, i); + return; + } + to++; + } + } +} + +EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c index c9db75c06af..a995850cd9d 100644 --- a/arch/arm/plat-s3c/dma.c +++ b/arch/arm/plat-s3c/dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dma.c * - * Copyright (c) 2003-2005,2006,2009 Simtec Electronics + * Copyright (c) 2003-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h index 0f440b9168d..53a93656d5d 100644 --- a/arch/arm/plat-s3c/include/plat/audio-simtec.h +++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h @@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata { void (*startup)(void); }; -extern int simtec_audio_add(const char *codec_name, +extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h index 7b982b7f28c..94eb06a2ea5 100644 --- a/arch/arm/plat-s3c/include/plat/cpu-freq.h +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/cpu-freq.h * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index fbc3d498e02..d1131ca11e9 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -12,6 +12,9 @@ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ +#ifndef __SAMSUNG_PLAT_CPU_H +#define __SAMSUNG_PLAT_CPU_H + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; +extern void (*s5pc1xx_idle)(void); + +#endif diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h index 34dba98f08e..e429d10be3a 100644 --- a/arch/arm/plat-s3c/include/plat/dma.h +++ b/arch/arm/plat-s3c/include/plat/dma.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C DMA support diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h index 214ff561b0d..f8db87930f8 100644 --- a/arch/arm/plat-s3c/include/plat/fb.h +++ b/arch/arm/plat-s3c/include/plat/fb.h @@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); */ extern void s3c64xx_fb_gpio_setup_24bpp(void); +/** + * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5pc100_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h index 67450f11574..3083df00dee 100644 --- a/arch/arm/plat-s3c/include/plat/iic.h +++ b/arch/arm/plat-s3c/include/plat/iic.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/iic.h * - * Copyright 2004,2009 Simtec Electronics + * Copyright 2004-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C - I2C Controller platform_device info diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 18f958801e6..06598597841 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -55,3 +55,11 @@ struct s3c2410_platform_nand { int chip); }; +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h new file mode 100644 index 00000000000..a60ed0d06c9 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h @@ -0,0 +1,235 @@ +/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards and specifically the S3C64XX series + * S3C6400 and S3C6410. + * + * The file contains the cpu specific items which change between whichever + * architecture is selected. See <plat/regs-fb.h> for the core definitions + * that are the same. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* include the core definitions here, in case we really do need to + * override them at a later date. +*/ + +#include <plat/regs-fb.h> + +#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ +#define VIDCON1_FSTATUS_EVEN (1 << 15) + +/* Video timing controls */ +#define VIDTCON0 (0x10) +#define VIDTCON1 (0x14) +#define VIDTCON2 (0x18) + +/* Window position controls */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) + +/* OSD1 and OSD4 do not have register D */ + +#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) +#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) +#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) +#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) + + +#define VIDINTCON0 (0x130) + +#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) + +/* WINCONx */ + +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT (26) +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) + +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_YCbCr (1 << 13) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) + +#define WINCON2_LOCALSEL_CAMIF (1 << 23) +#define WINCON2_BLD_PIX (1 << 6) + +#define WINCON2_ALPHA_SEL (1 << 1) +#define WINCON2_BPPMODE_MASK (0xf << 2) +#define WINCON2_BPPMODE_SHIFT (2) +#define WINCON2_BPPMODE_1BPP (0x0 << 2) +#define WINCON2_BPPMODE_2BPP (0x1 << 2) +#define WINCON2_BPPMODE_4BPP (0x2 << 2) +#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) + +#define WINCON3_BLD_PIX (1 << 6) + +#define WINCON3_ALPHA_SEL (1 << 1) +#define WINCON3_BPPMODE_MASK (0xf << 2) +#define WINCON3_BPPMODE_SHIFT (2) +#define WINCON3_BPPMODE_1BPP (0x0 << 2) +#define WINCON3_BPPMODE_2BPP (0x1 << 2) +#define WINCON3_BPPMODE_4BPP (0x2 << 2) +#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) + +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define DITHMODE (0x170) +#define WINxMAP(_win) (0x180 + ((_win) * 4)) + + +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT (5) +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) + +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT (3) +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) + +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT (1) +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) + +#define DITHMODE_DITH_EN (1 << 0) + +#define WPALCON (0x1A0) + +/* Palette control */ +/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L), + * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */ +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) + + +/* system specific implementation code for palette sizes, and other + * information that changes depending on which architecture is being + * compiled. +*/ + +/* return true if window _win has OSD register D */ +#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) + +static inline unsigned int s3c_fb_win_pal_size(unsigned int win) +{ + if (win < 2) + return 256; + if (win < 4) + return 16; + if (win == 4) + return 4; + + BUG(); /* shouldn't get here */ +} + +static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) +{ + /* all windows can do 1/2 bpp */ + + if ((bpp == 25 || bpp == 19) && win == 0) + return 0; /* win 0 does not have 19 or 25bpp modes */ + + if (bpp == 4 && win == 4) + return 0; + + if (bpp == 8 && (win >= 3)) + return 0; /* win 3/4 cannot do 8bpp in any mode */ + + return 1; +} + +static inline int s3c_fb_pal_is16(unsigned int window) +{ + return window > 1; +} + +struct s3c_fb_palette { + struct fb_bitfield r; + struct fb_bitfield g; + struct fb_bitfield b; + struct fb_bitfield a; +}; + +static inline void s3c_fb_init_palette(unsigned int window, + struct s3c_fb_palette *palette) +{ + if (window < 2) { + /* Windows 0/1 are 8/8/8 or A/8/8/8 */ + palette->r.offset = 16; + palette->r.length = 8; + palette->g.offset = 8; + palette->g.length = 8; + palette->b.offset = 0; + palette->b.length = 8; + } else { + /* currently we assume RGB 5/6/5 */ + palette->r.offset = 11; + palette->r.length = 5; + palette->g.offset = 5; + palette->g.length = 6; + palette->b.offset = 0; + palette->b.length = 5; + } +} + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h index b2caa4bca27..238efea7b9e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-nand.h +++ b/arch/arm/plat-s3c/include/plat/regs-nand.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-nand.h * - * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ + * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index 66af75a5cdd..85d8904e7f2 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -6,7 +6,7 @@ * * Copyright (C) 2002 Shane Nay (shane@minirl.com) * - * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) * * Adapted from: * diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h index f615308ccdf..53198673b6b 100644 --- a/arch/arm/plat-s3c/include/plat/sdhci.h +++ b/arch/arm/plat-s3c/include/plat/sdhci.h @@ -57,6 +57,7 @@ struct s3c_sdhci_platdata { */ extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); /* Default platform data, exported so that per-cpu initialisation can * set the correct one when there are more than one cpu type selected. @@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; /* Helper function availablity */ extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void) static inline void s3c6400_default_sdhci1(void) { } #endif /* CONFIG_S3C_DEV_HSMMC1 */ +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6400_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} +#else +static inline void s3c6400_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + #else static inline void s3c6400_default_sdhci0(void) { } static inline void s3c6400_default_sdhci1(void) { } @@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void) static inline void s3c6410_default_sdhci1(void) { } #endif /* CONFIG_S3C_DEV_HSMMC1 */ +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6410_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + #else static inline void s3c6410_default_sdhci0(void) { } static inline void s3c6410_default_sdhci1(void) { } #endif /* CONFIG_S3C6410_SETUP_SDHCI */ +/* S5PC100 SDHCI setup */ + +#ifdef CONFIG_S5PC100_SETUP_SDHCI +extern char *s5pc100_hsmmc_clksrcs[4]; + +extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s5pc100_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s5pc100_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s5pc100_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + + +#else +static inline void s5pc100_default_sdhci0(void) { } +static inline void s5pc100_default_sdhci1(void) { } +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S5PC100_SETUP_SDHCI */ + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c index 39f2555564d..8eb1f439861 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-s3c/pm-check.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/pm-check.c * originally in linux/arch/arm/plat-s3c24xx/pm.c * - * Copyright (c) 2004,2006,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * http://armlinux.simtec.co.uk * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 8d97db2c7a0..767470601e5 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/pm.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2004,2006,2008 Simtec Electronics + * Copyright 2004-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 9c7aca48964..20fbf936bb9 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -178,4 +178,11 @@ config MACH_SMDK help Common machine code for SMDK2410 and SMDK2440 +config S3C24XX_SIMTEC_AUDIO + bool + depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) + default y + help + Add audio devices for common Simtec S3C24XX boards + endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 7780d2dd833..5dee8c12e8b 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o # machine common support obj-$(CONFIG_MACH_SMDK) += common-smdk.o +obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 0afb217a775..ac061a1bcb3 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/clock-dclk.c * - * Copyright (c) 2004,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index aa119863c5c..9e0e20ad2e4 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -198,7 +198,7 @@ void __init smdk_machine_init(void) if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; - s3c_device_nand.dev.platform_data = &smdk_nand_info; + s3c_nand_set_platdata(&smdk_nand_info); platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 4f1b789a117..2d42efb9f4e 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/cpu-freq.c * - * Copyright (c) 2006,2007,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f046f8c5108..f65192d5b1d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/dma.c * - * Copyright (c) 2003-2005,2006 Simtec Electronics + * Copyright 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core @@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, int channel; int ret; - printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n"); dma_channels = channels; diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index c776120b99e..33d421d78ba 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/cpu-freq.h * - * Copyright (c) 2006,2007,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index c2cef613968..36aaa10fad0 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -1,6 +1,31 @@ #ifndef _ARCH_MCI_H #define _ARCH_MCI_H +/** + * struct s3c24xx_mci_pdata - sd/mmc controller platform data + * @no_wprotect: Set this to indicate there is no write-protect switch. + * @no_detect: Set this if there is no detect switch. + * @wprotect_invert: Invert the default sense of the write protect switch. + * @detect_invert: Invert the default sense of the write protect switch. + * @use_dma: Set to allow the use of DMA. + * @gpio_detect: GPIO number for the card detect line. + * @gpio_wprotect: GPIO number for the write protect line. + * @ocr_avail: The mask of the available power states, non-zero to use. + * @set_power: Callback to control the power mode. + * + * The @gpio_detect is used for card detection when @no_wprotect is unset, + * and the default sense is that 0 returned from gpio_get_value() means + * that a card is inserted. If @detect_invert is set, then the value from + * gpio_get_value() is inverted, which makes 1 mean card inserted. + * + * The driver will use @gpio_wprotect to signal whether the card is write + * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() + * means the card is read/write, and 1 means read-only. The @wprotect_invert + * will invert the value returned from gpio_get_value(). + * + * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set + * to a non-zero value, otherwise the default of 3.2-3.4V is used. + */ struct s3c24xx_mci_pdata { unsigned int no_wprotect : 1; unsigned int no_detect : 1; diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h index 3bc0a216df9..1b0f4c36d38 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C24XX DMA support diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c index b7acf1a8ecd..ea8dea3339a 100644 --- a/arch/arm/plat-s3c24xx/irq-pm.c +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq-om.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index d02f5f02045..ef0f521437d 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index da0d3217d3e..663b280d65d 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/pm-simtec.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://armlinux.simtec.co.uk/ @@ -35,7 +35,7 @@ #include <plat/pm.h> -#define COPYRIGHT ", (c) 2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2005 Simtec Electronics" /* pm_simtec_init * diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 56e5253ca02..3620dd29909 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/pm.c * - * Copyright (c) 2004,2006 Simtec Electronics + * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX Power Manager (Suspend-To-RAM) support diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index d0a3a145cd4..963fb0b4379 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c * - * Copyright (c) 2006,2008,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index fd45e47facb..24993dce10b 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c * - * Copyright (c) 2006,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c index ae2e6c604f2..976002fb1b8 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c +++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c * - * Copyright (c) 2006,2008,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c index ff9443b233a..49f65032f2c 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c +++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@arm.linux.org.uk> diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index dde41f171af..79371091aa3 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c * - * Copyright (c) 2004-2005,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c index 0902afd227c..a75c0c2431e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c new file mode 100644 index 00000000000..6bc832e0d8e --- /dev/null +++ b/arch/arm/plat-s3c24xx/simtec-audio.c @@ -0,0 +1,77 @@ +/* linux/arch/arm/plat-s3c24xx/simtec-audio.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Audio setup for various Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/io.h> + +#include <mach/bast-map.h> +#include <mach/bast-irq.h> +#include <mach/bast-cpld.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#include <plat/audio-simtec.h> +#include <plat/devs.h> + +/* platform ops for audio */ + +static void simtec_audio_startup_lrroute(void) +{ + unsigned int tmp; + unsigned long flags; + + local_irq_save(flags); + + tmp = __raw_readb(BAST_VA_CTRL1); + tmp &= ~BAST_CPLD_CTRL1_LRMASK; + tmp |= BAST_CPLD_CTRL1_LRCDAC; + __raw_writeb(tmp, BAST_VA_CTRL1); + + local_irq_restore(flags); +} + +static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata; +static char our_name[32]; + +static struct platform_device simtec_audio_dev = { + .name = our_name, + .id = -1, + .dev = { + .parent = &s3c_device_iis.dev, + .platform_data = &simtec_audio_platdata, + }, +}; + +int __init simtec_audio_add(const char *name, bool has_lr_routing, + struct s3c24xx_audio_simtec_pdata *spd) +{ + if (!name) + name = "tlv320aic23"; + + snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name); + + /* copy platform data so the source can be __initdata */ + if (spd) + simtec_audio_platdata = *spd; + + if (has_lr_routing) + simtec_audio_platdata.startup = simtec_audio_startup_lrroute; + + platform_device_register(&s3c_device_iis); + platform_device_register(&simtec_audio_dev); + return 0; +} diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c index b1fdd83940a..49796d2db86 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), + .length = SZ_1K, + .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c index e6e0843215d..74c0e8347de 100644 --- a/arch/arm/plat-s3c64xx/cpufreq.c +++ b/arch/arm/plat-s3c64xx/cpufreq.c @@ -19,6 +19,7 @@ static struct clk *armclk; static struct regulator *vddarm; +static unsigned long regulator_latency; #ifdef CONFIG_CPU_S3C6410 struct s3c64xx_dvfs { @@ -27,11 +28,10 @@ struct s3c64xx_dvfs { }; static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { - [0] = { 1000000, 1000000 }, - [1] = { 1000000, 1050000 }, - [2] = { 1050000, 1100000 }, - [3] = { 1050000, 1150000 }, - [4] = { 1250000, 1350000 }, + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, }; static struct cpufreq_frequency_table s3c64xx_freq_table[] = { @@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = { { 1, 266000 }, { 2, 333000 }, { 2, 400000 }, - { 3, 532000 }, - { 3, 533000 }, - { 4, 667000 }, + { 2, 532000 }, + { 2, 533000 }, + { 3, 667000 }, { 0, CPUFREQ_TABLE_END }, }; #endif @@ -141,7 +141,7 @@ err: } #ifdef CONFIG_REGULATOR -static void __init s3c64xx_cpufreq_constrain_voltages(void) +static void __init s3c64xx_cpufreq_config_regulator(void) { int count, v, i, found; struct cpufreq_frequency_table *freq; @@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void) count = regulator_count_voltages(vddarm); if (count < 0) { pr_err("cpufreq: Unable to check supported voltages\n"); - return; } freq = s3c64xx_freq_table; - while (freq->frequency != CPUFREQ_TABLE_END) { + while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; @@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void) freq++; } + + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; } #endif @@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) pr_err("cpufreq: Only frequency scaling available\n"); vddarm = NULL; } else { - s3c64xx_cpufreq_constrain_voltages(); + s3c64xx_cpufreq_config_regulator(); } #endif @@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) /* Check for frequencies we can generate */ r = clk_round_rate(armclk, freq->frequency * 1000); r /= 1000; - if (r != freq->frequency) + if (r != freq->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock\n", + freq->frequency); freq->frequency = CPUFREQ_ENTRY_INVALID; + } /* If we have no regulator then assume startup * frequency is the maximum we can support. */ @@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) policy->cur = clk_get_rate(armclk) / 1000; - /* Pick a conservative guess in ns: we'll need ~1 I2C/SPI - * write plus clock reprogramming. */ - policy->cpuinfo.transition_latency = 2 * 1000 * 1000; + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); if (ret != 0) { diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 92859290ea3..77856045727 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .get_pull = s3c_gpio_getpull_updown, }; +int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + static struct s3c_gpio_chip gpio_4bit[] = { { .base = S3C64XX_GPA_BASE, @@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = { .base = S3C64XX_GPM(0), .ngpio = S3C64XX_GPIO_M_NR, .label = "GPM", + .to_irq = s3c64xx_gpio2int_gpm, }, }, }; +int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} + static struct s3c_gpio_chip gpio_4bit2[] = { { .base = S3C64XX_GPH_BASE + 0x4, @@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { .base = S3C64XX_GPL(0), .ngpio = S3C64XX_GPIO_L_NR, .label = "GPL", + .to_irq = s3c64xx_gpio2int_gpl, }, }, }; diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h index c47daf7e272..e22b49f4f98 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h @@ -36,18 +36,18 @@ #define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) #define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S0_V40_DO (0x05 << 16) +#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) #define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) #define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) #define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S1_V40_DO (0x05 << 20) +#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) #define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) #define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) #define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) #define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S2_V40_DO (0x05 << 28) +#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) #define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index f81b7b818ba..ebdf183a091 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); - int pin; + int pin, pin_val; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) return -1; } - shift = (offs / 2) * 4; + if (offs <= 15) + shift = (offs / 2) * 4; + else + shift = ((offs - 16) / 2) * 4; mask = 0x7 << shift; ctrl = __raw_readl(reg); @@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) /* set the GPIO pin appropriately */ - if (offs < 23) + if (offs < 16) { pin = S3C64XX_GPN(offs); - else + pin_val = S3C_GPIO_SFN(2); + } else if (offs < 23) { + pin = S3C64XX_GPL(offs + 8 - 16); + pin_val = S3C_GPIO_SFN(3); + } else { pin = S3C64XX_GPM(offs - 23); + pin_val = S3C_GPIO_SFN(3); + } - s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(pin, pin_val); return 0; } diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c index 5417123b0ac..a58c0cc7ba5 100644 --- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c @@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); } + +void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPH(6 + width); + + /* Set all the necessary GPH pins to special-function 1 */ + for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Set all the necessary GPC pins to special-function 1 */ + for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index a8a711c3c06..1608e62b0c9 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -15,6 +15,9 @@ config PLAT_S5PC1XX select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select S3C_GPIO_CFG_S3C64XX + select S5P_GPIO_CFG_S5PC1XX help Base platform code for any Samsung S5PC1XX device @@ -34,7 +37,12 @@ config CPU_S5PC100_CLOCK # platform specific device setup -config S5PC100_SETUP_I2C0 +config S5PC1XX_SETUP_FB_24BPP + bool + help + Common setup code for S5PC1XX with an 24bpp RGB display helper. + +config S5PC1XX_SETUP_I2C0 bool default y help @@ -43,8 +51,14 @@ config S5PC100_SETUP_I2C0 Note, currently since i2c0 is always compiled, this setup helper is always compiled with it. -config S5PC100_SETUP_I2C1 +config S5PC1XX_SETUP_I2C1 bool help Common setup code for i2c bus 1. + +config S5PC1XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + endif diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile index f1ecb2c37ee..278f2680608 100644 --- a/arch/arm/plat-s5pc1xx/Makefile +++ b/arch/arm/plat-s5pc1xx/Makefile @@ -13,7 +13,9 @@ obj- := obj-y += dev-uart.o obj-y += cpu.o -obj-y += irq.o +obj-y += irq.o irq-gpio.o irq-eint.o +obj-y += clock.o +obj-y += gpiolib.o # CPU support @@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o # Device setup -obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o +obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c new file mode 100644 index 00000000000..26c21d84979 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/clock.c @@ -0,0 +1,728 @@ +/* linux/arch/arm/plat-s5pc1xx/clock.c + * + * Copyright 2009 Samsung Electronics Co. + * + * S5PC1XX Base clock support + * + * Based on plat-s3c64xx/clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/regs-clock.h> +#include <plat/devs.h> +#include <plat/clock.h> + +struct clk clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +static int clk_48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5PC100_CLKSRC1); + if (enable) + val |= S5PC100_CLKSRC1_CLK48M_MASK; + else + val &= ~S5PC100_CLKSRC1_CLK48M_MASK; + + __raw_writel(val, S5PC100_CLKSRC1); + local_irq_restore(flags); + + return 0; +} + +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, + .enable = clk_48m_ctrl, +}; + +struct clk clk_54m = { + .name = "clk_54m", + .id = -1, + .rate = 54000000, +}; + +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + +static int clk_dummy_enable(struct clk *clk, int enable) +{ + return 0; +} + +struct clk clk_hd0 = { + .name = "hclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, + .enable = clk_dummy_enable, +}; + +struct clk clk_pd0 = { + .name = "pclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, + .enable = clk_dummy_enable, +}; + +static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + __raw_writel(con, reg); + + return 0; +} + +static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); +} + +static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); +} + +static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); +} + +static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); +} + +static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); +} + +static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); +} + +static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); +} + +static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); +} + +static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); +} + +static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); +} + +int s5pc100_sclk0_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); +} + +int s5pc100_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); +} + +static struct clk s5pc100_init_clocks_disable[] = { + { + .name = "dsi", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_DSI, + }, { + .name = "csi", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_CSI, + }, { + .name = "ccan", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, + }, { + .name = "ccan", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, + }, { + .name = "keypad", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, + }, { + .name = "hclkd2", + .id = -1, + .parent = NULL, + .enable = s5pc100_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, + }, { + .name = "iis-d2", + .id = -1, + .parent = NULL, + .enable = s5pc100_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, + }, +}; + +static struct clk s5pc100_init_clocks[] = { + /* System1 (D0_0) devices */ + { + .name = "intc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_INTC, + }, { + .name = "tzic", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_TZIC, + }, { + .name = "cf-ata", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CFCON, + }, { + .name = "mdma", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_MDMA, + }, { + .name = "g2d", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_G2D, + }, { + .name = "secss", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_SECSS, + }, { + .name = "cssys", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, + }, + + /* Memory (D0_1) devices */ + { + .name = "dmc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_DMC, + }, { + .name = "sromc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_SROMC, + }, { + .name = "onenand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, + }, { + .name = "nand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_NFCON, + }, { + .name = "intmem", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, + }, { + .name = "ebi", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_EBI, + }, + + /* System2 (D0_2) devices */ + { + .name = "seckey", + .id = -1, + .parent = &clk_pd0, + .enable = s5pc100_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, + }, { + .name = "sdm", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SDM, + }, + + /* File (D1_0) devices */ + { + .name = "pdma", + .id = 0, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, + }, { + .name = "pdma", + .id = 1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, + }, { + .name = "otg", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, + }, { + .name = "modem", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, + }, + + /* Multimedia1 (D1_1) devices */ + { + .name = "lcd", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_LCD, + }, { + .name = "rotator", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, + }, { + .name = "jpeg", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_JPEG, + }, { + .name = "g3d", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_G3D, + }, + + /* Multimedia2 (D1_2) devices */ + { + .name = "tv", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_TV, + }, { + .name = "vp", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_VP, + }, { + .name = "mixer", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MIXER, + }, { + .name = "hdmi", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_HDMI, + }, { + .name = "mfc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MFC, + }, + + /* System (D1_3) devices */ + { + .name = "chipid", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_GPIO, + }, { + .name = "apc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_APC, + }, { + .name = "iec", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_IEC, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_PWM, + }, { + .name = "systimer", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_WDT, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_RTC, + }, + + /* Connectivity (D1_4) devices */ + { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART3, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IIC, + }, { + .name = "hdmi-i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI1, + }, { + .name = "spi", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI2, + }, { + .name = "irda", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IRDA, + }, { + .name = "hsitx", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSITX, + }, { + .name = "hsirx", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, + }, + + /* Audio (D1_5) devices */ + { + .name = "iis", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS0, + }, { + .name = "iis", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS1, + }, { + .name = "iis", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS2, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_AC97, + }, { + .name = "pcm", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM0, + }, { + .name = "pcm", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM1, + }, { + .name = "spdif", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_TSADC, + }, { + .name = "cg", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_CG, + }, + + /* Audio (D2_0) devices: all disabled */ + + /* Special Clocks 0 */ + { + .name = "sclk_hpm", + .id = -1, + .parent = NULL, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM, + }, { + .name = "sclk_onenand", + .id = -1, + .parent = NULL, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, + }, { + .name = "spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, + }, { + .name = "spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, + }, { + .name = "spi_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, + }, { + .name = "mmc_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, + }, { + .name = "mmc_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, + }, { + .name = "mmc_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, + }, + /* Special Clocks 1 */ +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_27m, + &clk_48m, + &clk_54m, +}; + +void __init s5pc1xx_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + int size; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + clkp = s5pc100_init_clocks; + size = ARRAY_SIZE(s5pc100_init_clocks); + + for (ptr = 0; ptr < size; ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clkp = s5pc100_init_clocks_disable; + size = ARRAY_SIZE(s5pc100_init_clocks_disable); + + for (ptr = 0; ptr < size; ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c index 715a7330794..02baeaa2a12 100644 --- a/arch/arm/plat-s5pc1xx/cpu.c +++ b/arch/arm/plat-s5pc1xx/cpu.c @@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = { static struct map_desc s5pc1xx_iodesc[] __initdata = { { + .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER, + .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC1XX_VA_CHIPID, .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID), .length = SZ_16, diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c new file mode 100644 index 00000000000..bba675df9c7 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/gpio-config.c @@ -0,0 +1,62 @@ +/* linux/arch/arm/plat-s5pc1xx/gpio-config.c + * + * Copyright 2009 Samsung Electronics + * + * S5PC1XX GPIO Configuration. + * + * Based on plat-s3c64xx/gpio-config.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/gpio-core.h> +#include <plat/gpio-cfg-s5pc1xx.h> + +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + void __iomem *reg; + int shift = off * 2; + u32 drvstr; + + if (!chip) + return -EINVAL; + + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = 0xffff & (0x3 << shift); + drvstr = drvstr >> shift; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, + s5p_gpio_drvstr_t drvstr) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + void __iomem *reg; + int shift = off * 2; + u32 tmp; + + if (!chip) + return -EINVAL; + + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c new file mode 100644 index 00000000000..facb410e7a7 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/gpiolib.c @@ -0,0 +1,503 @@ +/* + * arch/arm/plat-s5pc1xx/gpiolib.c + * + * Copyright 2009 Samsung Electronics Co + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S5PC1XX - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <mach/gpio-core.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/regs-gpio.h> + +/* S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +#define OFF_GPCON (0x00) +#define OFF_GPDAT (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + +#if 1 +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The s5pc1xx_gpiolib routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. + */ + +static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + OFF_GPCON); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int s5pc1xx_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + OFF_GPDAT); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + OFF_GPDAT); + __raw_writel(con, base + OFF_GPCON); + __raw_writel(dat, base + OFF_GPDAT); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + return S3C_IRQ_GPIO(chip->base + offset); +} + +static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) +{ + int base; + + base = chip->base - S5PC100_GPH0(0); + if (base == 0) + return IRQ_EINT(offset); + base = chip->base - S5PC100_GPH1(0); + if (base == 0) + return IRQ_EINT(8 + offset); + base = chip->base - S5PC100_GPH2(0); + if (base == 0) + return IRQ_EINT(16 + offset); + base = chip->base - S5PC100_GPH3(0); + if (base == 0) + return IRQ_EINT(24 + offset); + return -EINVAL; +} + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_eint = { + .cfg_eint = 0xf, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip s5pc100_gpio_chips[] = { + { + .base = S5PC100_GPA0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .base = S5PC100_GPA1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .base = S5PC100_GPB_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5PC100_GPC_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5PC100_GPD_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5PC100_GPE0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .base = S5PC100_GPE1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .base = S5PC100_GPF0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .base = S5PC100_GPF1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .base = S5PC100_GPF2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .base = S5PC100_GPF3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .base = S5PC100_GPG0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .base = S5PC100_GPG1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .base = S5PC100_GPG2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .base = S5PC100_GPG3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .base = S5PC100_GPH0_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = S5PC100_GPH1_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = S5PC100_GPH2_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = S5PC100_GPH3_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + }, + }, { + .base = S5PC100_GPI_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5PC100_GPJ0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .base = S5PC100_GPJ1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .base = S5PC100_GPJ2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .base = S5PC100_GPJ3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .base = S5PC100_GPJ4_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .base = S5PC100_GPK0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .base = S5PC100_GPK1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .base = S5PC100_GPK2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .base = S5PC100_GPK3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .base = S5PC100_GPL0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .base = S5PC100_GPL1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .base = S5PC100_GPL2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .base = S5PC100_GPL3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .base = S5PC100_GPL4_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, +}; + +/* FIXME move from irq-gpio.c */ +extern struct irq_chip s5pc1xx_gpioint; +extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); + +static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = s5pc1xx_gpiolib_input; + chip->chip.direction_output = s5pc1xx_gpiolib_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); + + /* Interrupt */ + if (chip->config == &gpio_cfg) { + int i, irq; + + chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; + + for (i = 0; i < chip->chip.ngpio; i++) { + irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; + set_irq_chip(irq, &s5pc1xx_gpioint); + set_irq_data(irq, &chip->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + } else if (chip->config == &gpio_cfg_eint) + chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; +} + +static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips, + int nr_chips, + void (*fn)(struct s3c_gpio_chip *)) +{ + for (; nr_chips > 0; nr_chips--, chips++) { + if (fn) + (fn)(chips); + s3c_gpiolib_add(chips); + } +} + +static __init int s5pc1xx_gpiolib_init(void) +{ + struct s3c_gpio_chip *chips; + int nr_chips; + + chips = s5pc100_gpio_chips; + nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); + + s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link); + /* Interrupt */ + set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); + + return 0; +} +core_initcall(s5pc1xx_gpiolib_init); diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h new file mode 100644 index 00000000000..72ad59f61ef --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h @@ -0,0 +1,32 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h + * + * Copyright 2009 Samsung Electronic + * + * S5PC1XX Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +#ifndef __GPIO_CFG_S5PC1XX_H +#define __GPIO_CFG_S5PC1XX_H __FILE__ + +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; + +#define S5P_GPIO_DRVSTR_LV1 0x00 +#define S5P_GPIO_DRVSTR_LV2 0x01 +#define S5P_GPIO_DRVSTR_LV3 0x10 +#define S5P_GPIO_DRVSTR_LV4 0x11 + +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off); + +extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, + s5p_gpio_drvstr_t drvstr); + +#endif /* __GPIO_CFG_S5PC1XX_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h new file mode 100644 index 00000000000..33ad267e847 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h + * + * Copyright 2009 Samsung Electronics Co. + * + * External Interrupt (GPH0 ~ GPH3) control register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0) +#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4) +#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8) +#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC) +#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80) +#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84) +#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88) +#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C) +#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90) +#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94) +#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98) +#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C) +#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100) +#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104) +#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108) +#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C) +#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140) +#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144) +#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148) +#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C) +#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_LOWLEV (0x00) +#define S5PC1XX_WKUP_INT_HILEV (0x01) +#define S5PC1XX_WKUP_INT_FALLEDGE (0x02) +#define S5PC1XX_WKUP_INT_RISEEDGE (0x03) +#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04) diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h index f07d8c3b25d..ef8736366f0 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h @@ -171,12 +171,21 @@ #define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) #define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) +/* External interrupt */ #define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1) -#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) -#define IRQ_EINT(x) S3C_EINT(x) +#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) +#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) +#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0)) -#define NR_IRQS (IRQ_EINT(31)+1) +/* GPIO interrupt */ +#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) +#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) + +/* + * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs + */ +#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h index 75c8390cb82..c5cc86e92d6 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h @@ -13,68 +13,69 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ -#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x)) - -#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00) -#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04) -#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08) -#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C) - -#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100) -#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104) -#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108) -#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C) - -#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200) -#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204) -#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208) -#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C) - -#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300) -#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304) -#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308) -#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C) -#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310) - -#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400) - -#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500) -#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504) -#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508) - -#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520) -#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524) -#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528) -#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C) -#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530) -#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534) - -#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540) - -#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560) -#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564) - -#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) - -#define S5PC1XX_EPLL_EN (1<<31) -#define S5PC1XX_EPLL_MASK 0xffffffff -#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) +#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x)) +#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x)) + +/* s5pc100 register for clock */ +#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00) +#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04) +#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08) +#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C) + +#define S5PC100_APLL_CON S5PC100_CLKREG(0x100) +#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104) +#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108) +#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C) + +#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200) +#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204) +#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208) +#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C) + +#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300) +#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304) +#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308) +#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C) +#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310) + +#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400) + +#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500) +#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504) +#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508) + +#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520) +#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524) +#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528) +#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C) +#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530) +#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534) + +#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540) + +#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560) +#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564) + +/* EPLL_CON */ +#define S5PC100_EPLL_EN (1<<31) +#define S5PC100_EPLL_MASK 0xffffffff +#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) /* CLKSRC0 */ -#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0) -#define S5PC1XX_CLKSRC0_APLL_SHIFT (0) -#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4) -#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4) -#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8) -#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8) +#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0) +#define S5PC100_CLKSRC0_APLL_SHIFT (0) +#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4) +#define S5PC100_CLKSRC0_MPLL_SHIFT (4) +#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8) +#define S5PC100_CLKSRC0_EPLL_SHIFT (8) #define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12) #define S5PC100_CLKSRC0_HPLL_SHIFT (12) #define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16) #define S5PC100_CLKSRC0_AMMUX_SHIFT (16) #define S5PC100_CLKSRC0_HREF_MASK (0x1<<20) #define S5PC100_CLKSRC0_HREF_SHIFT (20) -#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24) -#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24) +#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24) +#define S5PC100_CLKSRC0_ONENAND_SHIFT (24) /* CLKSRC1 */ @@ -127,10 +128,9 @@ #define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24) #define S5PC100_CLKSRC3_SPDIF_SHIFT (24) - /* CLKDIV0 */ -#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0) -#define S5PC1XX_CLKDIV0_APLL_SHIFT (0) +#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) +#define S5PC100_CLKDIV0_APLL_SHIFT (0) #define S5PC100_CLKDIV0_ARM_MASK (0x7<<4) #define S5PC100_CLKDIV0_ARM_SHIFT (4) #define S5PC100_CLKDIV0_D0_MASK (0x7<<8) @@ -141,8 +141,8 @@ #define S5PC100_CLKDIV0_SECSS_SHIFT (16) /* CLKDIV1 */ -#define S5PC100_CLKDIV1_AM_MASK (0x7<<0) -#define S5PC100_CLKDIV1_AM_SHIFT (0) +#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) +#define S5PC100_CLKDIV1_APLL2_SHIFT (0) #define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) #define S5PC100_CLKDIV1_MPLL_SHIFT (4) #define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8) @@ -202,7 +202,6 @@ #define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20) #define S5PC100_CLKDIV4_AUDIO2_SHIFT (20) - /* HCLKD0/PCLKD0 Clock Gate 0 Registers */ #define S5PC100_CLKGATE_D00_INTC (1<<0) #define S5PC100_CLKGATE_D00_TZIC (1<<1) @@ -295,8 +294,8 @@ #define S5PC100_CLKGATE_D20_I2SD2 (1<<1) /* Special Clock Gate 0 Registers */ -#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0) -#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1) +#define S5PC100_CLKGATE_SCLK0_HPM (1<<0) +#define S5PC100_CLKGATE_SCLK0_PWI (1<<1) #define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2) #define S5PC100_CLKGATE_SCLK0_UART (1<<3) #define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4) @@ -329,89 +328,28 @@ #define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11) #define S5PC100_CLKGATE_SCLK1_CAM (1<<12) -/* register for power management */ -#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000) -#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004) -#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010) -#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014) -#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018) -#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C) -#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100) -#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104) -#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108) -#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110) -#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114) -#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) -#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300) -#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304) -#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308) -#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400) -#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404) -#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408) -#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C) -#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410) -#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414) -#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418) -#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C) -#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500) -#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504) -#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508) -#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C) -#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510) -#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514) -#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518) -#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C) -#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520) -#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600) -#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604) -#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608) -#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C) -#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610) -#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614) -#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618) -#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C) -#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620) -#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700) -#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704) -#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708) -#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C) -#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710) -#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714) -#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718) -#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C) -#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724) - -#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000) -#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008) -#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100) -#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104) -#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200) -#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300) -#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304) -#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308) -#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400) -#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414) -#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420) - -#define S5PC100_CFG_WFI_CLEAN (~(3<<5)) -#define S5PC100_CFG_WFI_IDLE (1<<5) -#define S5PC100_CFG_WFI_STOP (2<<5) -#define S5PC100_CFG_WFI_SLEEP (3<<5) - +#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000) +#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008) +#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100) +#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104) +#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200) +#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300) +#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304) +#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308) +#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400) +#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414) +#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420) + +#define S5PC100_SWRESET_RESETVAL 0xc100 #define S5PC100_OTHER_SYS_INT 24 #define S5PC100_OTHER_STA_TYPE 23 #define STA_TYPE_EXPON 0 #define STA_TYPE_SFR 1 -#define S5PC100_PWR_STA_EXP_SCALE 0 -#define S5PC100_PWR_STA_CNT 4 - -#define S5PC100_PWR_STABLE_COUNT 85500 - #define S5PC100_SLEEP_CFG_OSC_EN 0 /* OTHERS Resgister */ -#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) +#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) #define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI D-PHY Control Register 0 */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h new file mode 100644 index 00000000000..43c7bc8bf78 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min <bhmin@samsung.com> + * + * S5PC1XX - GPIO register definitions + */ + +#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H +#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +/* S5PC100 */ +#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO +#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) +#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) +#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) +#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060) +#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080) +#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0) +#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0) +#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0) +#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100) +#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120) +#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140) +#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160) +#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180) +#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0) +#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0) +#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00) +#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20) +#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40) +#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60) +#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0) +#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200) +#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220) +#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240) +#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260) +#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280) +#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0) +#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0) +#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0) +#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300) +#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320) +#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340) +#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) +#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) +#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) +#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00) + +#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68) +#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80) + +/* PDNEN */ +#define S5PC100_PDNEN_CFG_PDNEN (1 << 1) +#define S5PC100_PDNEN_CFG_AUTO (0 << 1) +#define S5PC100_PDNEN_POWERDOWN (1 << 0) +#define S5PC100_PDNEN_NORMAL (0 << 0) + +/* Common part */ +/* External interrupt base is same at both s5pc100 and s5pc110 */ +#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE) + +#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) +#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4)) + +#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */ + diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h new file mode 100644 index 00000000000..02ffa491b53 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h @@ -0,0 +1,84 @@ +/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h + * + * Copyright 2009 Samsung Electronics Co. + * Jongse Won <jongse.won@samsung.com> + * + * S5PC1XX clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_REGS_PWR +#define __ASM_ARM_REGS_PWR __FILE__ + +#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x)) + +/* s5pc100 (0xE0108000) register for power management */ +#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0) +#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4) +#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10) +#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14) +#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18) +#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C) +#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100) +#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104) +#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108) +#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110) +#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114) +#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200) +#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300) +#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304) +#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308) +#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400) +#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404) +#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408) +#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C) +#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410) +#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414) +#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418) +#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C) +#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500) +#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504) +#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508) +#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C) +#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510) +#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514) +#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518) +#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C) +#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520) +#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600) +#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604) +#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608) +#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C) +#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610) +#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614) +#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618) +#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C) +#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620) +#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700) +#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704) +#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708) +#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C) +#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710) +#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714) +#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718) +#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C) +#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724) + +/* PWR_CFG */ +#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31) +#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5) +#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5) +#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5) +#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5) +#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5) + +/* SLEEP_CFG */ +#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0) + +/* OTHERS */ +#define S5PC100_PMU_INT_DISABLE (1 << 24) + +#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h index 45e27513166..2531f34a56f 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h +++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h @@ -35,10 +35,9 @@ extern struct clk clk_hpll; extern struct clk clk_hd0; extern struct clk clk_pd0; extern struct clk clk_54m; -extern struct clk clk_dout_mpll2; extern void s5pc1xx_register_clocks(void); -extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable); -extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable); +extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable); +extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable); /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */ extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[]; diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c new file mode 100644 index 00000000000..373122f57d5 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/irq-eint.c @@ -0,0 +1,281 @@ +/* + * linux/arch/arm/plat-s5pc1xx/irq-eint.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min <bhmin@samsung.com> + * Kyungin Park <kyungmin.park@samsung.com> + * + * Based on plat-s3c64xx/irq-eint.c + * + * S5PC1XX - Interrupt handling for IRQ_EINT(x) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/pm.h> +#include <linux/gpio.h> + +#include <asm/hardware/vic.h> + +#include <mach/map.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-ext.h> +#include <plat/pm.h> +#include <plat/regs-gpio.h> +#include <plat/regs-irqtype.h> + +/* + * bank is a group of external interrupt + * bank0 means EINT0 ... EINT7 + * bank1 means EINT8 ... EINT15 + * bank2 means EINT16 ... EINT23 + * bank3 means EINT24 ... EINT31 + */ + +static inline int s3c_get_eint(unsigned int irq) +{ + int real; + + if (irq < IRQ_EINT16_31) + real = (irq - IRQ_EINT0); + else + real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0; + + return real; +} + +static inline int s3c_get_bank(unsigned int irq) +{ + return s3c_get_eint(irq) >> 3; +} + +static inline int s3c_eint_to_bit(unsigned int irq) +{ + int real, bit; + + real = s3c_get_eint(irq); + bit = 1 << (real & (8 - 1)); + + return bit; +} + +static inline void s3c_irq_eint_mask(unsigned int irq) +{ + u32 mask; + u32 bank = s3c_get_bank(irq); + + mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); + mask |= s3c_eint_to_bit(irq); + __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); +} + +static void s3c_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + u32 bank = s3c_get_bank(irq); + + mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); + mask &= ~(s3c_eint_to_bit(irq)); + __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); +} + +static inline void s3c_irq_eint_ack(unsigned int irq) +{ + u32 bank = s3c_get_bank(irq); + + __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank)); +} + +static void s3c_irq_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s3c_irq_eint_mask(irq); + s3c_irq_eint_ack(irq); +} + +static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + u32 bank = s3c_get_bank(irq); + int real = s3c_get_eint(irq); + int gpio, shift, sfn; + u32 ctrl, con = 0; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + con = S5PC1XX_WKUP_INT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + con = S5PC1XX_WKUP_INT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + con = S5PC1XX_WKUP_INT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + con = S5PC1XX_WKUP_INT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + con = S5PC1XX_WKUP_INT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + gpio = real & (8 - 1); + shift = gpio << 2; + + ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank)); + ctrl &= ~(0x7 << shift); + ctrl |= con << shift; + __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank)); + + switch (real) { + case 0 ... 7: + gpio = S5PC100_GPH0(gpio); + break; + case 8 ... 15: + gpio = S5PC100_GPH1(gpio); + break; + case 16 ... 23: + gpio = S5PC100_GPH2(gpio); + break; + case 24 ... 31: + gpio = S5PC100_GPH3(gpio); + break; + default: + return -EINVAL; + } + + sfn = S3C_GPIO_SFN(0x2); + s3c_gpio_cfgpin(gpio, sfn); + + return 0; +} + +static struct irq_chip s3c_irq_eint = { + .name = "EINT", + .mask = s3c_irq_eint_mask, + .unmask = s3c_irq_eint_unmask, + .mask_ack = s3c_irq_eint_maskack, + .ack = s3c_irq_eint_ack, + .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, +}; + +/* s3c_irq_demux_eint + * + * This function demuxes the IRQ from external interrupts, + * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into + * the specific handlers s3c_irq_demux_eintX_Y. + */ +static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3))); + u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3))); + unsigned int irq; + + status &= ~mask; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + + status >>= 1; + } +} + +static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(16, 23); + s3c_irq_demux_eint(24, 31); +} + +/* + * Handle EINT0 ... EINT15 at VIC directly + */ +static void s3c_irq_vic_eint_mask(unsigned int irq) +{ + void __iomem *base = get_irq_chip_data(irq); + unsigned int real; + + s3c_irq_eint_mask(irq); + real = s3c_get_eint(irq); + writel(1 << real, base + VIC_INT_ENABLE_CLEAR); +} + +static void s3c_irq_vic_eint_unmask(unsigned int irq) +{ + void __iomem *base = get_irq_chip_data(irq); + unsigned int real; + + s3c_irq_eint_unmask(irq); + real = s3c_get_eint(irq); + writel(1 << real, base + VIC_INT_ENABLE); +} + +static inline void s3c_irq_vic_eint_ack(unsigned int irq) +{ + u32 bit; + u32 bank = s3c_get_bank(irq); + + bit = s3c_eint_to_bit(irq); + __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank)); +} + +static void s3c_irq_vic_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s3c_irq_vic_eint_mask(irq); + s3c_irq_vic_eint_ack(irq); +} + +static struct irq_chip s3c_irq_vic_eint = { + .name = "EINT", + .mask = s3c_irq_vic_eint_mask, + .unmask = s3c_irq_vic_eint_unmask, + .mask_ack = s3c_irq_vic_eint_maskack, + .ack = s3c_irq_vic_eint_ack, + .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, +}; + +static int __init s5pc1xx_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) { + set_irq_chip(irq, &s3c_irq_vic_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { + set_irq_chip(irq, &s3c_irq_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31); + + return 0; +} + +arch_initcall(s5pc1xx_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c new file mode 100644 index 00000000000..fecca7a679b --- /dev/null +++ b/arch/arm/plat-s5pc1xx/irq-gpio.c @@ -0,0 +1,266 @@ +/* + * arch/arm/plat-s5pc1xx/irq-gpio.c + * + * Copyright (C) 2009 Samsung Electronics + * + * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <plat/gpio-cfg.h> + +#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x)) + +#define CON_OFFSET 0x700 +#define MASK_OFFSET 0x900 +#define PEND_OFFSET 0xA00 +#define CON_OFFSET_2 0xE00 +#define MASK_OFFSET_2 0xF00 +#define PEND_OFFSET_2 0xF40 + +#define GPIOINT_LEVEL_LOW 0x0 +#define GPIOINT_LEVEL_HIGH 0x1 +#define GPIOINT_EDGE_FALLING 0x2 +#define GPIOINT_EDGE_RISING 0x3 +#define GPIOINT_EDGE_BOTH 0x4 + +static int group_to_con_offset(int group) +{ + return group << 2; +} + +static int group_to_mask_offset(int group) +{ + return group << 2; +} + +static int group_to_pend_offset(int group) +{ + return group << 2; +} + +static int s5pc1xx_get_start(unsigned int group) +{ + switch (group) { + case 0: return S5PC100_GPIO_A0_START; + case 1: return S5PC100_GPIO_A1_START; + case 2: return S5PC100_GPIO_B_START; + case 3: return S5PC100_GPIO_C_START; + case 4: return S5PC100_GPIO_D_START; + case 5: return S5PC100_GPIO_E0_START; + case 6: return S5PC100_GPIO_E1_START; + case 7: return S5PC100_GPIO_F0_START; + case 8: return S5PC100_GPIO_F1_START; + case 9: return S5PC100_GPIO_F2_START; + case 10: return S5PC100_GPIO_F3_START; + case 11: return S5PC100_GPIO_G0_START; + case 12: return S5PC100_GPIO_G1_START; + case 13: return S5PC100_GPIO_G2_START; + case 14: return S5PC100_GPIO_G3_START; + case 15: return S5PC100_GPIO_I_START; + case 16: return S5PC100_GPIO_J0_START; + case 17: return S5PC100_GPIO_J1_START; + case 18: return S5PC100_GPIO_J2_START; + case 19: return S5PC100_GPIO_J3_START; + case 20: return S5PC100_GPIO_J4_START; + default: + BUG(); + } + + return -EINVAL; +} + +static int s5pc1xx_get_group(unsigned int irq) +{ + irq -= S3C_IRQ_GPIO(0); + + switch (irq) { + case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1: + return 0; + case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1: + return 1; + case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1: + return 2; + case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1: + return 3; + case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1: + return 4; + case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1: + return 5; + case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1: + return 6; + case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1: + return 7; + case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1: + return 8; + case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1: + return 9; + case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1: + return 10; + case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1: + return 11; + case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1: + return 12; + case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1: + return 13; + case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1: + return 14; + case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1: + return 15; + case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1: + return 16; + case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1: + return 17; + case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1: + return 18; + case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1: + return 19; + case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1: + return 20; + default: + BUG(); + } + + return -EINVAL; +} + +static int s5pc1xx_get_offset(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + return irq - S3C_IRQ_GPIO(chip->base); +} + +static void s5pc1xx_gpioint_ack(unsigned int irq) +{ + int group, offset, pend_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + pend_offset = group_to_pend_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + value |= 1 << offset; + __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); +} + +static void s5pc1xx_gpioint_mask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + mask_offset = group_to_mask_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value |= 1 << offset; + __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); +} + +static void s5pc1xx_gpioint_unmask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + mask_offset = group_to_mask_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value &= ~(1 << offset); + __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); +} + +static void s5pc1xx_gpioint_mask_ack(unsigned int irq) +{ + s5pc1xx_gpioint_mask(irq); + s5pc1xx_gpioint_ack(irq); +} + +static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) +{ + int group, offset, con_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + con_offset = group_to_con_offset(group); + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No irq type\n"); + return -EINVAL; + case IRQ_TYPE_EDGE_RISING: + type = GPIOINT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + type = GPIOINT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + type = GPIOINT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + type = GPIOINT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + type = GPIOINT_LEVEL_LOW; + break; + default: + BUG(); + } + + + value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + value &= ~(0xf << (offset * 0x4)); + value |= (type << (offset * 0x4)); + __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + + return 0; +} + +struct irq_chip s5pc1xx_gpioint = { + .name = "GPIO", + .ack = s5pc1xx_gpioint_ack, + .mask = s5pc1xx_gpioint_mask, + .mask_ack = s5pc1xx_gpioint_mask_ack, + .unmask = s5pc1xx_gpioint_unmask, + .set_type = s5pc1xx_gpioint_set_type, +}; + +void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) +{ + int group, offset, pend_offset, mask_offset; + int real_irq, group_end; + unsigned int pend, mask; + + group_end = 21; + + for (group = 0; group < group_end; group++) { + pend_offset = group_to_pend_offset(group); + pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + if (!pend) + continue; + + mask_offset = group_to_mask_offset(group); + mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + pend &= ~mask; + + for (offset = 0; offset < 8; offset++) { + if (pend & (1 << offset)) { + real_irq = s5pc1xx_get_start(group) + offset; + generic_handle_irq(S3C_IRQ_GPIO(real_irq)); + } + } + } +} diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c index 80d6dd942cb..e44fd04ef33 100644 --- a/arch/arm/plat-s5pc1xx/irq.c +++ b/arch/arm/plat-s5pc1xx/irq.c @@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq) { u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - reg &= 0x1f; + reg &= 0x1f; /* mask out pending interrupts */ reg |= (1 << 5) << (irq - IRQ_TIMER0); __raw_writel(reg, S3C64XX_TINT_CSTAT); } diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c index 6b24035172f..b436d44510c 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c @@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = { #define clk_fin_hpll clk_ext_xtal_mux #define clk_fout_mpll clk_mpll +#define clk_vclk_54m clk_54m struct clk_sources { unsigned int nr_sources; @@ -67,746 +68,327 @@ struct clksrc_clk { void __iomem *reg_source; }; -static int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 1; -} - -struct clk clk_27m = { - .name = "clk_27m", +/* APLL */ +static struct clk clk_fout_apll = { + .name = "fout_apll", .id = -1, .rate = 27000000, }; -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +static struct clk_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .shift = S5PC100_CLKSRC0_APLL_SHIFT, + .mask = S5PC100_CLKSRC0_APLL_MASK, + .sources = &clk_src_apll, + .reg_source = S5PC100_CLKSRC0, +}; - val = __raw_readl(S5PC1XX_CLK_SRC1); - if (enable) - val |= S5PC100_CLKSRC1_CLK48M_MASK; - else - val &= ~S5PC100_CLKSRC1_CLK48M_MASK; +static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - __raw_writel(val, S5PC1XX_CLK_SRC1); - local_irq_restore(flags); + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK; + ratio >>= S5PC100_CLKDIV0_APLL_SHIFT; - return 0; + return rate / (ratio + 1); } -struct clk clk_48m = { - .name = "clk_48m", +static struct clk clk_dout_apll = { + .name = "dout_apll", .id = -1, - .rate = 48000000, - .enable = clk_48m_ctrl, + .parent = &clk_mout_apll.clk, + .get_rate = s5pc100_clk_dout_apll_get_rate, }; -struct clk clk_54m = { - .name = "clk_54m", - .id = -1, - .rate = 54000000, -}; - -struct clk clk_hpll = { - .name = "hpll", - .id = -1, -}; +static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -struct clk clk_hd0 = { - .name = "hclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK; + ratio >>= S5PC100_CLKDIV0_ARM_SHIFT; -struct clk clk_pd0 = { - .name = "pclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; + return rate / (ratio + 1); +} -static int s5pc1xx_clk_gate(void __iomem *reg, - struct clk *clk, - int enable) +static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk, + unsigned long rate) { - unsigned int ctrlbit = clk->ctrlbit; - u32 con; + unsigned long parent = clk_get_rate(clk->parent); + u32 div; - con = __raw_readl(reg); + if (parent < rate) + return rate; - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; + div = (parent / rate) - 1; + if (div > S5PC100_CLKDIV0_ARM_MASK) + div = S5PC100_CLKDIV0_ARM_MASK; - __raw_writel(con, reg); - return 0; + return parent / (div + 1); } -static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable) +static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate) { - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); -} + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + u32 val; -static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); -} + if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1)) + return -EINVAL; -static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); -} + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; -static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); -} + val = __raw_readl(S5PC100_CLKDIV0); + val &= S5PC100_CLKDIV0_ARM_MASK; + val |= (div - 1); + __raw_writel(val, S5PC100_CLKDIV0); -static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); + return 0; } -static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); -} +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .parent = &clk_dout_apll, + .get_rate = s5pc100_clk_arm_get_rate, + .set_rate = s5pc100_clk_arm_set_rate, + .round_rate = s5pc100_clk_arm_round_rate, +}; -static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable) +static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); -} + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); -} + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK; + ratio >>= S5PC100_CLKDIV0_D0_SHIFT; -static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); + return rate / (ratio + 1); } -static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); -} +static struct clk clk_dout_d0_bus = { + .name = "dout_d0_bus", + .id = -1, + .parent = &clk_arm, + .get_rate = s5pc100_clk_dout_d0_bus_get_rate, +}; -int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable) +static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK; + ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT; + + return rate / (ratio + 1); } -int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable) +static struct clk clk_dout_pclkd0 = { + .name = "dout_pclkd0", + .id = -1, + .parent = &clk_dout_d0_bus, + .get_rate = s5pc100_clk_dout_pclkd0_get_rate, +}; + +static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK; + ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT; + + return rate / (ratio + 1); } -static struct clk init_clocks_disable[] = { - { - .name = "dsi", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_DSI, - }, { - .name = "csi", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_CSI, - }, { - .name = "ccan0", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, - }, { - .name = "ccan1", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, - }, { - .name = "keypad", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "hclkd2", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, - }, { - .name = "iis-d2", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, - }, { - .name = "otg", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, - }, +static struct clk clk_dout_apll2 = { + .name = "dout_apll2", + .id = -1, + .parent = &clk_mout_apll.clk, + .get_rate = s5pc100_clk_dout_apll2_get_rate, }; -static struct clk init_clocks[] = { - /* System1 (D0_0) devices */ - { - .name = "intc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_INTC, - }, { - .name = "tzic", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_TZIC, - }, { - .name = "cf-ata", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CFCON, - }, { - .name = "mdma", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_MDMA, - }, { - .name = "g2d", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_G2D, - }, { - .name = "secss", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_SECSS, - }, { - .name = "cssys", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, - }, +/* MPLL */ +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; - /* Memory (D0_1) devices */ - { - .name = "dmc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_DMC, - }, { - .name = "sromc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_SROMC, - }, { - .name = "onenand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, - }, { - .name = "nand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_NFCON, - }, { - .name = "intmem", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, - }, { - .name = "ebi", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_EBI, - }, +static struct clk_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; - /* System2 (D0_2) devices */ - { - .name = "seckey", - .id = -1, - .parent = &clk_pd0, - .enable = s5pc1xx_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, - }, { - .name = "sdm", +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SDM, }, + .shift = S5PC100_CLKSRC0_MPLL_SHIFT, + .mask = S5PC100_CLKSRC0_MPLL_MASK, + .sources = &clk_src_mpll, + .reg_source = S5PC100_CLKSRC0, +}; - /* File (D1_0) devices */ - { - .name = "pdma0", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, - }, { - .name = "pdma1", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, - }, { - .name = "modem", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, - }, +static struct clk *clkset_am_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_dout_apll2, +}; - /* Multimedia1 (D1_1) devices */ - { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_LCD, - }, { - .name = "rotator", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, - }, { - .name = "fimc", - .id = 0, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, - }, { - .name = "fimc", - .id = 1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, - }, { - .name = "fimc", - .id = 2, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, - }, { - .name = "jpeg", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_JPEG, - }, { - .name = "g3d", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_G3D, - }, +static struct clk_sources clk_src_am = { + .sources = clkset_am_list, + .nr_sources = ARRAY_SIZE(clkset_am_list), +}; - /* Multimedia2 (D1_2) devices */ - { - .name = "tv", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_TV, - }, { - .name = "vp", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_VP, - }, { - .name = "mixer", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MIXER, - }, { - .name = "hdmi", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_HDMI, - }, { - .name = "mfc", +static struct clksrc_clk clk_mout_am = { + .clk = { + .name = "mout_am", .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MFC, }, + .shift = S5PC100_CLKSRC0_AMMUX_SHIFT, + .mask = S5PC100_CLKSRC0_AMMUX_MASK, + .sources = &clk_src_am, + .reg_source = S5PC100_CLKSRC0, +}; - /* System (D1_3) devices */ - { - .name = "chipid", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_GPIO, - }, { - .name = "apc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_APC, - }, { - .name = "iec", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_IEC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_PWM, - }, { - .name = "systimer", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_WDT, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_RTC, - }, +static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - /* Connectivity (D1_4) devices */ - { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART3, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IIC, - }, { - .name = "hdmi-i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, - }, { - .name = "spi", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI1, - }, { - .name = "spi", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI2, - }, { - .name = "irda", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IRDA, - }, { - .name = "hsitx", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSITX, - }, { - .name = "hsirx", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, - }, + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - /* Audio (D1_5) devices */ - { - .name = "iis", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS0, - }, { - .name = "iis", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS1, - }, { - .name = "iis", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS2, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_AC97, - }, { - .name = "pcm", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM0, - }, { - .name = "pcm", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM1, - }, { - .name = "spdif", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_TSADC, - }, { - .name = "keyif", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "cg", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_CG, - }, + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK; + ratio >>= S5PC100_CLKDIV1_D1_SHIFT; - /* Audio (D2_0) devices: all disabled */ + return rate / (ratio + 1); +} - /* Special Clocks 1 */ - { - .name = "sclk_hpm", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM, - }, { - .name = "sclk_onenand", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, - }, { - .name = "sclk_spi_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, - }, { - .name = "sclk_mmc_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, - }, { - .name = "sclk_mmc_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, - }, { - .name = "sclk_mmc_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, - }, +static struct clk clk_dout_d1_bus = { + .name = "dout_d1_bus", + .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_d1_bus_get_rate, +}; - /* Special Clocks 2 */ - { - .name = "sclk_tv_54", - .id = -1, - .parent = &clk_54m, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54, - }, { - .name = "sclk_vdac_54", - .id = -1, - .parent = &clk_54m, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54, - }, { - .name = "sclk_spdif", +static struct clk *clkset_onenand_list[] = { + [0] = &clk_dout_d0_bus, + [1] = &clk_dout_d1_bus, +}; + +static struct clk_sources clk_src_onenand = { + .sources = clkset_onenand_list, + .nr_sources = ARRAY_SIZE(clkset_onenand_list), +}; + +static struct clksrc_clk clk_mout_onenand = { + .clk = { + .name = "mout_onenand", .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF, }, + .shift = S5PC100_CLKSRC0_ONENAND_SHIFT, + .mask = S5PC100_CLKSRC0_ONENAND_MASK, + .sources = &clk_src_onenand, + .reg_source = S5PC100_CLKSRC0, }; -void __init s5pc1xx_register_clocks(void) +static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) { - struct clk *clkp; - int ret; - int ptr; + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK; + ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } + return rate / (ratio + 1); +} - (clkp->enable)(clkp, 0); - } +static struct clk clk_dout_pclkd1 = { + .name = "dout_pclkd1", + .id = -1, + .parent = &clk_dout_d1_bus, + .get_rate = s5pc100_clk_dout_pclkd1_get_rate, +}; + +static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK; + ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT; - s3c_pwmclk_init(); + return rate / (ratio + 1); } -static struct clk clk_fout_apll = { - .name = "fout_apll", + +static struct clk clk_dout_mpll2 = { + .name = "dout_mpll2", .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_mpll2_get_rate, }; -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; +static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -static struct clk_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK; + ratio >>= S5PC100_CLKDIV1_CAM_SHIFT; + + return rate / (ratio + 1); +} + +static struct clk clk_dout_cam = { + .name = "dout_cam", + .id = -1, + .parent = &clk_dout_mpll2, + .get_rate = s5pc100_clk_dout_cam_get_rate, }; -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .shift = S5PC1XX_CLKSRC0_APLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_APLL_MASK, - .sources = &clk_src_apll, - .reg_source = S5PC1XX_CLK_SRC0, +static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK; + ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT; + + return rate / (ratio + 1); +} + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_mpll_get_rate, }; +/* EPLL */ static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, @@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = { .name = "mout_epll", .id = -1, }, - .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_EPLL_MASK, + .shift = S5PC100_CLKSRC0_EPLL_SHIFT, + .mask = S5PC100_CLKSRC0_EPLL_MASK, .sources = &clk_src_epll, - .reg_source = S5PC1XX_CLK_SRC0, + .reg_source = S5PC100_CLKSRC0, }; -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clk_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_MPLL_MASK, - .sources = &clk_src_mpll, - .reg_source = S5PC1XX_CLK_SRC0, -}; - -static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK; - rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1; - - return rate; -} - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", +/* HPLL */ +static struct clk clk_fout_hpll = { + .name = "fout_hpll", .id = -1, - .parent = &clk_mout_mpll.clk, - .get_rate = s5pc1xx_clk_doutmpll_get_rate, }; -static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK; - rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1; - - return rate; -} - -struct clk clk_dout_mpll2 = { - .name = "dout_mpll2", - .id = -1, - .parent = &clk_mout_mpll.clk, - .get_rate = s5pc1xx_clk_doutmpll2_get_rate, +static struct clk *clk_src_hpll_list[] = { + [0] = &clk_27m, + [1] = &clk_fout_hpll, }; -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL +static struct clk_sources clk_src_hpll = { + .sources = clk_src_hpll_list, + .nr_sources = ARRAY_SIZE(clk_src_hpll_list), }; -static struct clk_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), +static struct clksrc_clk clk_mout_hpll = { + .clk = { + .name = "mout_hpll", + .id = -1, + }, + .shift = S5PC100_CLKSRC0_HPLL_SHIFT, + .mask = S5PC100_CLKSRC0_HPLL_MASK, + .sources = &clk_src_hpll, + .reg_source = S5PC100_CLKSRC0, }; +/* Peripherals */ +/* + * The peripheral clocks are all controlled via clocksource followed + * by an optional divider and gate stage. We currently roll this into + * one clock which hides the intermediate clock from the mux. + * + * Note, the JPEG clock can only be an even divider... + * + * The scaler and LCD clocks depend on the S5PC100 version, and also + * have a common parent divisor so are not included here. + */ + static inline struct clksrc_clk *to_clksrc(struct clk *clk) { return container_of(clk, struct clksrc_clk, clk); } -static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk) +static unsigned long s5pc100_getrate_clksrc(struct clk *clk) { struct clksrc_clk *sclk = to_clksrc(clk); unsigned long rate = clk_get_rate(clk->parent); @@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk) return rate; } -static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate) +static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate) { struct clksrc_clk *sclk = to_clksrc(clk); void __iomem *reg = sclk->reg_divider; @@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate) return -EINVAL; val = __raw_readl(reg); - val &= ~(0xf << sclk->shift); - val |= (div - 1) << sclk->shift; + val &= ~(0xf << sclk->divider_shift); + val |= (div - 1) << sclk->divider_shift; __raw_writel(val, reg); return 0; } -static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent) +static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent) { struct clksrc_clk *sclk = to_clksrc(clk); struct clk_sources *srcs = sclk->sources; @@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent) return -EINVAL; } -static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk, +static unsigned long s5pc100_roundrate_clksrc(struct clk *clk, unsigned long rate) { unsigned long parent_rate = clk_get_rate(clk->parent); @@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk, return rate; } +static struct clk *clkset_spi_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll2, + &clk_fin_epll, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_spi = { + .sources = clkset_spi_list, + .nr_sources = ARRAY_SIZE(clkset_spi_list), +}; + +static struct clksrc_clk clk_spi0 = { + .clk = { + .name = "spi_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI0_SHIFT, + .mask = S5PC100_CLKSRC1_SPI0_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clksrc_clk clk_spi1 = { + .clk = { + .name = "spi_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI1_SHIFT, + .mask = S5PC100_CLKSRC1_SPI1_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clksrc_clk clk_spi2 = { + .clk = { + .name = "spi_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI2_SHIFT, + .mask = S5PC100_CLKSRC1_SPI2_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, +}; + +static struct clk_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + static struct clksrc_clk clk_uart_uclk1 = { .clk = { .name = "uclk1", .id = -1, .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc1xx_sclk0_ctrl, - .set_parent = s5pc1xx_setparent_clksrc, - .get_rate = s5pc1xx_getrate_clksrc, - .set_rate = s5pc1xx_setrate_clksrc, - .round_rate = s5pc1xx_roundrate_clksrc, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, }, .shift = S5PC100_CLKSRC1_UART_SHIFT, .mask = S5PC100_CLKSRC1_UART_MASK, .sources = &clkset_uart, .divider_shift = S5PC100_CLKDIV2_UART_SHIFT, - .reg_divider = S5PC1XX_CLK_DIV2, - .reg_source = S5PC1XX_CLK_SRC1, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clk clk_iis_cd0 = { + .name = "iis_cdclk0", + .id = -1, +}; + +static struct clk clk_iis_cd1 = { + .name = "iis_cdclk1", + .id = -1, +}; + +static struct clk clk_iis_cd2 = { + .name = "iis_cdclk2", + .id = -1, +}; + +static struct clk clk_pcm_cd0 = { + .name = "pcm_cdclk0", + .id = -1, +}; + +static struct clk clk_pcm_cd1 = { + .name = "pcm_cdclk1", + .id = -1, +}; + +static struct clk *clkset_audio0_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd0, + &clk_pcm_cd0, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio0 = { + .sources = clkset_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_audio0_list), +}; + +static struct clksrc_clk clk_audio0 = { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO0_MASK, + .sources = &clkset_audio0, + .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_audio1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd1, + &clk_pcm_cd1, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio1 = { + .sources = clkset_audio1_list, + .nr_sources = ARRAY_SIZE(clkset_audio1_list), +}; + +static struct clksrc_clk clk_audio1 = { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO1_MASK, + .sources = &clkset_audio1, + .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_audio2_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd2, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio2 = { + .sources = clkset_audio2_list, + .nr_sources = ARRAY_SIZE(clkset_audio2_list), +}; + +static struct clksrc_clk clk_audio2 = { + .clk = { + .name = "audio-bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO2_MASK, + .sources = &clkset_audio2, + .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_spdif_list[] = { + &clk_audio0.clk, + &clk_audio1.clk, + &clk_audio2.clk, +}; + +static struct clk_sources clkset_spdif = { + .sources = clkset_spdif_list, + .nr_sources = ARRAY_SIZE(clkset_spdif_list), +}; + +static struct clksrc_clk clk_spdif = { + .clk = { + .name = "spdif", + .id = -1, + }, + .shift = S5PC100_CLKSRC3_SPDIF_SHIFT, + .mask = S5PC100_CLKSRC3_SPDIF_MASK, + .sources = &clkset_spdif, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_lcd_fimc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_mout_hpll.clk, + &clk_vclk_54m, +}; + +static struct clk_sources clkset_lcd_fimc = { + .sources = clkset_lcd_fimc_list, + .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), +}; + +static struct clksrc_clk clk_lcd = { + .clk = { + .name = "lcd", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_LCD_SHIFT, + .mask = S5PC100_CLKSRC2_LCD_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc0 = { + .clk = { + .name = "fimc", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC0_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC0_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc1 = { + .clk = { + .name = "fimc", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC1_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC1_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc2 = { + .clk = { + .name = "fimc", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC2_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC2_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clk *clkset_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_mout_hpll.clk , +}; + +static struct clk_sources clkset_mmc = { + .sources = clkset_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_mmc_list), +}; + +static struct clksrc_clk clk_mmc0 = { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC0_SHIFT, + .mask = S5PC100_CLKSRC2_MMC0_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_mmc1 = { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC1_SHIFT, + .mask = S5PC100_CLKSRC2_MMC1_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_mmc2 = { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC2_SHIFT, + .mask = S5PC100_CLKSRC2_MMC2_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + + +static struct clk *clkset_usbhost_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_mout_hpll.clk, + &clk_48m, +}; + +static struct clk_sources clkset_usbhost = { + .sources = clkset_usbhost_list, + .nr_sources = ARRAY_SIZE(clkset_usbhost_list), +}; + +static struct clksrc_clk clk_usbhost = { + .clk = { + .name = "usbhost", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_UHOST_SHIFT, + .mask = S5PC100_CLKSRC1_UHOST_MASK, + .sources = &clkset_usbhost, + .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, }; /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { &clk_mout_apll, - &clk_mout_epll, &clk_mout_mpll, + &clk_mout_am, + &clk_mout_onenand, + &clk_mout_epll, + &clk_mout_hpll, + &clk_spi0, + &clk_spi1, + &clk_spi2, &clk_uart_uclk1, + &clk_audio0, + &clk_audio1, + &clk_audio2, + &clk_spdif, + &clk_lcd, + &clk_fimc0, + &clk_fimc1, + &clk_fimc2, + &clk_mmc0, + &clk_mmc1, + &clk_mmc2, + &clk_usbhost, }; -static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk) +static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk) { struct clk_sources *srcs = clk->sources; u32 clksrc = __raw_readl(clk->reg_source); @@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk) clk->clk.parent = srcs->sources[clksrc]; - printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", - clk->clk.name, clk->clk.parent->name, clksrc, - clk_get_rate(&clk->clk)); + printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n", + clk->clk.name, clk->clk.parent->name, clksrc, + print_mhz(clk_get_rate(&clk->clk))); } #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) @@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) unsigned long hclk; unsigned long pclkd0; unsigned long pclk; - unsigned long apll; - unsigned long mpll; - unsigned long hpll; - unsigned long epll; + unsigned long apll, mpll, epll, hpll; unsigned int ptr; u32 clkdiv0, clkdiv1; printk(KERN_DEBUG "%s: registering clocks\n", __func__); - clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0); - clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1); + clkdiv0 = __raw_readl(S5PC100_CLKDIV0); + clkdiv1 = __raw_readl(S5PC100_CLKDIV1); - printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", - __func__, clkdiv0, clkdiv1); + printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1); xtal_clk = clk_get(NULL, "xtal"); BUG_ON(IS_ERR(xtal_clk)); @@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON)); - mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON)); - epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON)); + apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON)); + mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON)); + epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON)); hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON)); - printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n", - apll, mpll, epll, hpll); + printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz" + ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n", + print_mhz(apll), print_mhz(mpll), + print_mhz(epll), print_mhz(hpll)); - armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL); + armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL); armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM); hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0); pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0); hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1); pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1); - printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n", - armclk, hclkd0, pclkd0, hclk, pclk); + printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz," + " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz," + " PCLK=%ld.%03ld MHz\n", + print_mhz(armclk), print_mhz(hclkd0), + print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk)); clk_fout_apll.rate = apll; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; + clk_fout_hpll.rate = hpll; clk_h.rate = hclk; clk_p.rate = pclk; + clk_f.rate = armclk; for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s5pc1xx_set_clksrc(init_parents[ptr]); + s5pc100_set_clksrc(init_parents[ptr]); } static struct clk *clks[] __initdata = { &clk_ext_xtal_mux, - &clk_mout_epll.clk, - &clk_fout_epll, + &clk_mout_apll.clk, + &clk_dout_apll, + &clk_dout_d0_bus, + &clk_dout_pclkd0, + &clk_dout_apll2, &clk_mout_mpll.clk, + &clk_mout_am.clk, + &clk_dout_d1_bus, + &clk_mout_onenand.clk, + &clk_dout_pclkd1, + &clk_dout_mpll2, + &clk_dout_cam, &clk_dout_mpll, + &clk_mout_epll.clk, + &clk_fout_epll, + &clk_iis_cd0, + &clk_iis_cd1, + &clk_iis_cd2, + &clk_pcm_cd0, + &clk_pcm_cd1, + &clk_spi0.clk, + &clk_spi1.clk, + &clk_spi2.clk, &clk_uart_uclk1.clk, - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_54m, + &clk_audio0.clk, + &clk_audio1.clk, + &clk_audio2.clk, + &clk_spdif.clk, + &clk_lcd.clk, + &clk_fimc0.clk, + &clk_fimc1.clk, + &clk_fimc2.clk, + &clk_mmc0.clk, + &clk_mmc1.clk, + &clk_mmc2.clk, + &clk_usbhost.clk, + &clk_arm, }; void __init s5pc100_register_clocks(void) @@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void) clkp->name, ret); } } - - clk_mpll.parent = &clk_mout_mpll.clk; - clk_epll.parent = &clk_mout_epll.clk; } diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c new file mode 100644 index 00000000000..1a63768a9a2 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c + * + * Copyright 2009 Samsung Electronics + * + * Base S5PC1XX setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <mach/regs-fb.h> +#include <mach/map.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-s5pc1xx.h> + +#define DISR_OFFSET 0x7008 + +void s5pc100_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c index 3d00c025fff..5e4a7c3a231 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c0.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c index c8f3ca42f51..a0a8b4ae6ad 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c1.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c new file mode 100644 index 00000000000..185c8941e64 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c + * + * Copyright 2009 Samsung Eletronics + * + * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> + +void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + unsigned int num; + + num = width; + /* In case of 8 width, we should decrease the 2 */ + if (width == 8) + num = width - 2; + + end = S5PC100_GPG0(2 + num); + + /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ + for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + if (width == 8) { + for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + } + + s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); +} + +void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S5PC100_GPG2(2 + width); + + /* Set all the necessary GPG2 pins to special-function 2 */ + for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); +} + +void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S5PC100_GPG3(2 + width); + + /* Set all the necessary GPG3 pins to special-function 2 */ + for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); +} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig new file mode 100644 index 00000000000..486a0d6301e --- /dev/null +++ b/arch/arm/plat-samsung/Kconfig @@ -0,0 +1,17 @@ +# arch/arm/plat-samsung/Kconfig +# +# Copyright 2009 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_SAMSUNG + bool + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + default y + help + Base platform code for all Samsung SoC based systems + +if PLAT_SAMSUNG + + +endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile new file mode 100644 index 00000000000..4478b9f7dc3 --- /dev/null +++ b/arch/arm/plat-samsung/Makefile @@ -0,0 +1,11 @@ +# arch/arm/plat-s3c64xx/Makefile +# +# Copyright 2009 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + |