diff options
Diffstat (limited to 'arch/arm')
101 files changed, 775 insertions, 896 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8c83d98424c..f95ba14ae3d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,8 +12,6 @@ config ARM select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_KERNEL_THREAD - select GENERIC_KERNEL_EXECVE select GENERIC_PCI_IOMAP select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 49ca86e37b8..fe4d9c3ad76 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -44,7 +44,7 @@ #else -#include <mach/debug-macro.S> +#include CONFIG_DEBUG_LL_INCLUDE .macro writeb, ch, rb senduart \ch, \rb diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0f441740c22..e44da40d984 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -42,11 +42,10 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ - exynos5250-smdk5250.dtb \ - exynos5440-ssdk5440.dtb \ exynos4412-smdk4412.dtb \ exynos5250-smdk5250.dtb \ - exynos5250-snow.dtb + exynos5250-snow.dtb \ + exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ @@ -107,6 +106,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ + omap4-panda-a4.dtb \ omap4-panda-es.dtb \ omap4-var-som.dtb \ omap4-sdp.dtb \ @@ -131,8 +131,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ - sun5i-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 8e6251f1f7a..32ec62cf538 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -368,14 +368,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fa1ae0c5479..231858ffd85 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -425,14 +425,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 617ede541ca..40ac3a4eb1a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer@f8008000 { diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index b01c0d745fc..fa04c7b18bc 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -21,17 +21,17 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; + }; - fec@1002b000 { + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { status = "okay"; }; }; }; - }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index af50469e34b..53b0ec0c228 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -21,8 +21,7 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; @@ -38,10 +37,6 @@ status = "okay"; }; - ethernet@1002b000 { - status = "okay"; - }; - i2c@1001d000 { clock-frequency = <400000>; status = "okay"; @@ -60,6 +55,12 @@ }; }; }; + + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { + status = "okay"; + }; + }; }; nor_flash@c0000000 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b8d3905915a..5a82cb5707a 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -55,7 +55,7 @@ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x10000000 0x10000000>; + reg = <0x10000000 0x20000>; ranges; wdog: wdog@10002000 { @@ -211,6 +211,15 @@ status = "disabled"; }; + }; + + aipi@10020000 { /* AIPI2 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10020000 0x20000>; + ranges; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index b222614ac9e..bdc80a4453d 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -92,6 +92,30 @@ status = "okay"; }; + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio1 22 0 &gpio1 23 0>; + i2c-parent = <&i2c1>; + + i2c@0 { + reg = <0>; + }; + + i2c@1 { + reg = <1>; + }; + + i2c@2 { + reg = <2>; + }; + + i2c@3 { + reg = <3>; + }; + }; + usbphy1: usbphy@8007e000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 77b84e17c47..9b0d07746cb 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -15,6 +15,6 @@ memory { device_type = "memory"; - reg = <0x80000000 0x84000000>; /* 64 MB */ + reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 009096d1d2c..b4ca60f4eb4 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -73,7 +73,7 @@ 400000 500000 600000 >; - status = "disable"; + status = "disabled"; }; ahb { @@ -118,15 +118,15 @@ compatible = "st,spear600-fsmc-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0xb0000000 0x1000 /* FSMC Register */ - 0xb0800000 0x0010>; /* NAND Base */ - reg-names = "fsmc_regs", "nand_data"; + reg = <0xb0000000 0x1000 /* FSMC Register*/ + 0xb0800000 0x0010 /* NAND Base DATA */ + 0xb0820000 0x0010 /* NAND Base ADDR */ + 0xb0810000 0x0010>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; interrupts = <0 20 0x4 0 21 0x4 0 22 0x4 0 23 0x4>; - st,ale-off = <0x20000>; - st,cle-off = <0x10000>; st,mode = <2>; status = "disabled"; }; @@ -144,7 +144,7 @@ compatible = "st,pcm-audio"; #address-cells = <0>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; smi: flash@ea000000 { diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 090adc65601..f79b3dfaabe 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -38,10 +38,10 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x94000000 0x1000 /* FSMC Register */ - 0x80000000 0x0010>; /* NAND Base */ - reg-names = "fsmc_regs", "nand_data"; - st,ale-off = <0x20000>; - st,cle-off = <0x10000>; + 0x80000000 0x0010 /* NAND Base DATA */ + 0x80020000 0x0010 /* NAND Base ADDR */ + 0x80010000 0x0010>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e814e5e9708..ab45b8c8198 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -33,10 +33,10 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x44000000 0x1000 /* FSMC Register */ - 0x40000000 0x0010>; /* NAND Base */ - reg-names = "fsmc_regs", "nand_data"; - st,ale-off = <0x10000>; - st,cle-off = <0x20000>; + 0x40000000 0x0010 /* NAND Base DATA */ + 0x40020000 0x0010 /* NAND Base ADDR */ + 0x40010000 0x0010>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index c056a84deab..caa5520b1fd 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -40,10 +40,10 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x4c000000 0x1000 /* FSMC Register */ - 0x50000000 0x0010>; /* NAND Base */ - reg-names = "fsmc_regs", "nand_data"; - st,ale-off = <0x20000>; - st,cle-off = <0x10000>; + 0x50000000 0x0010 /* NAND Base DATA */ + 0x50020000 0x0010 /* NAND Base ADDR */ + 0x50010000 0x0010>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index e051dde5181..19f99dc4115 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -76,10 +76,10 @@ #address-cells = <1>; #size-cells = <1>; reg = <0xd1800000 0x1000 /* FSMC Register */ - 0xd2000000 0x4000>; /* NAND Base */ - reg-names = "fsmc_regs", "nand_data"; - st,ale-off = <0x20000>; - st,cle-off = <0x10000>; + 0xd2000000 0x0010 /* NAND Base DATA */ + 0xd2020000 0x0010 /* NAND Base ADDR */ + 0xd2010000 0x0010>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index f4ca126ad99..5cab8254043 100644 --- a/arch/arm/boot/dts/sun4i-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -11,11 +11,11 @@ */ /dts-v1/; -/include/ "sun4i.dtsi" +/include/ "sun4i-a10.dtsi" / { model = "Cubietech Cubieboard"; - compatible = "cubietech,cubieboard", "allwinner,sun4i"; + compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/sun4i.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e61fdd47bd0..e61fdd47bd0 100644 --- a/arch/arm/boot/dts/sun4i.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index d6ff889a5d8..498a091a4ea 100644 --- a/arch/arm/boot/dts/sun5i-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -12,11 +12,11 @@ */ /dts-v1/; -/include/ "sun5i.dtsi" +/include/ "sun5i-a13.dtsi" / { model = "Olimex A13-Olinuxino"; - compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; chosen { bootargs = "earlyprintk console=ttyS0,115200"; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 59a2d265a98..59a2d265a98 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index dbea6f4efe9..2eeff1e64b6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_SUNXI=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 240b25eea56..86cfd2959c4 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -57,7 +57,7 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_NOMADIK=y +CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 67d06324e74..5b579b95150 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -91,6 +91,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { + debug_dma_mapping_error(dev, dma_addr); return dma_addr == DMA_ERROR_CODE; } diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7cd13cc6262..21a2700d295 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -41,7 +41,6 @@ #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_SYS_SOCKETCALL #endif -#define __ARCH_WANT_SYS_EXECVE #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h index 921c57fdc52..33073bdcf09 100644 --- a/arch/arm/include/uapi/asm/signal.h +++ b/arch/arm/include/uapi/asm/signal.h @@ -87,13 +87,6 @@ typedef unsigned long sigset_t; #define SA_NOMASK SA_NODEFER #define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ac03bdb4ae4..4da7cde70b5 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -405,6 +405,7 @@ #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) /* 378 for kcmp */ +#define __NR_finit_module (__NR_SYSCALL_BASE+379) /* * This may need to be greater than __NR_last_syscall+1 in order to diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 5935b6a02e6..a4fda4e7a37 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -388,6 +388,7 @@ CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) CALL(sys_ni_syscall) /* reserved for sys_kcmp */ + CALL(sys_finit_module) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 9a89bf4aefe..3f6cbb2e3ed 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -733,7 +733,7 @@ void __init setup_arch(char **cmdline_p) setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) - mdesc = setup_machine_tags(__atags_pointer, machine_arch_type); + mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index df745188f5d..ab1017bd166 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -109,10 +109,12 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr) { siginfo_t info; + down_read(¤t->mm->mmap_sem); if (find_vma(current->mm, addr) == NULL) info.si_code = SEGV_MAPERR; else info.si_code = SEGV_ACCERR; + up_read(¤t->mm->mmap_sem); info.si_signo = SIGSEGV; info.si_errno = 0; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b9f38e388b4..11c1785bf63 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -140,6 +140,8 @@ SECTIONS } #endif + NOTES + _etext = .; /* End of text and rodata section */ #ifndef CONFIG_XIP_KERNEL @@ -295,8 +297,6 @@ SECTIONS } #endif - NOTES - BSS_SECTION(0, 0, 0) _end = .; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 7211772edd9..0299915575a 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -41,6 +41,7 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> +#include <mach/sram.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fcdbe437409..2d5502d84a2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -725,7 +725,7 @@ static struct resource da8xx_rtc_resources[] = { }; static struct platform_device da8xx_rtc_device = { - .name = "omap_rtc", + .name = "da830-rtc", .id = -1, .num_resources = ARRAY_SIZE(da8xx_rtc_resources), .resource = da8xx_rtc_resources, @@ -734,17 +734,6 @@ static struct platform_device da8xx_rtc_device = { int da8xx_register_rtc(void) { int ret; - void __iomem *base; - - base = ioremap(DA8XX_RTC_BASE, SZ_4K); - if (WARN_ON(!base)) - return -ENOMEM; - - /* Unlock the rtc's registers */ - __raw_writel(0x83e70b13, base + 0x6c); - __raw_writel(0x95a4f1e0, base + 0x70); - - iounmap(base); ret = platform_device_register(&da8xx_rtc_device); if (!ret) diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 16026c2b1c8..d64274fc576 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) - break; - } + /* Transmit fifo not full? */ + while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) + ; __raw_writeb(c, PHYS_UART_DATA); } diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index efead60b943..bbcb3dea0d4 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -529,7 +529,7 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), }, { - .name = "dwmmc", + .name = "biu", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), @@ -1134,7 +1134,7 @@ static struct clksrc_clk exynos4_clksrcs[] = { .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_dwmmc", + .name = "ciu", .parent = &exynos4_clk_dout_mmc4.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 16), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index ddd4b72c6f9..d6d0dc65108 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -679,7 +679,8 @@ void __init exynos5_init_irq(void) * Theses parameters should be NULL and 0 because EXYNOS4 * uses GIC instead of VIC. */ - s5p_init_irq(NULL, 0); + if (!of_machine_is_compatible("samsung,exynos5440")) + s5p_init_irq(NULL, 0); gic_arch_extn.irq_set_wake = s3c_irq_wake; } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index dac146df79a..04744f9c120 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -25,7 +25,7 @@ void exynos_init_late(void); #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else -static int exynos_pm_late_initcall(void) { return 0; } +static inline int exynos_pm_late_initcall(void) { return 0; } #endif #ifdef CONFIG_ARCH_EXYNOS4 diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index a1cb42c3959..9d1a60951d7 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -23,11 +23,6 @@ #include <mach/irqs.h> #include <mach/regs-audss.h> -static const char *rclksrc[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - static int exynos4_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ @@ -55,7 +50,6 @@ static struct s3c_audio_pdata i2sv5_pdata = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc, .idma_addr = EXYNOS4_AUDSS_INT_MEM, }, }, @@ -78,17 +72,11 @@ struct platform_device exynos4_device_i2s0 = { }, }; -static const char *rclksrc_v3[] = { - [0] = "sclk_i2s", - [1] = "no_such_clock", -}; - static struct s3c_audio_pdata i2sv3_pdata = { .cfg_gpio = exynos4_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_NO_MUXPSR, - .src_clk = rclksrc_v3, }, }, }; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index f038c8cadca..e99d3d8f2bc 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -163,6 +163,7 @@ static char const *exynos5_dt_compat[] __initdata = { static void __init exynos5_reserve(void) { +#ifdef CONFIG_S5P_DEV_MFC struct s5p_mfc_dt_meminfo mfc_mem; /* Reserve memory for MFC only if it's available */ @@ -170,6 +171,7 @@ static void __init exynos5_reserve(void) if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem)) s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff, mfc_mem.lsize); +#endif } DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index e6f4191cd14..5e34b9c1619 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -621,7 +621,7 @@ static struct pwm_lookup origen_pwm_lookup[] = { PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL), }; -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD static struct exynos_drm_fimd_pdata drm_fimd_pdata = { .panel = { .timing = { @@ -793,7 +793,7 @@ static void __init origen_machine_init(void) s5p_i2c_hdmiphy_set_platdata(NULL); s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; exynos4_fimd0_gpio_setup_24bpp(); #else diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index a1555a73c7a..ae6da40c2aa 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -246,7 +246,7 @@ static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { .cols = 8, }; -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD static struct exynos_drm_fimd_pdata drm_fimd_pdata = { .panel = { .timing = { @@ -360,7 +360,7 @@ static void __init smdk4x12_machine_init(void) s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; exynos4_fimd0_gpio_setup_24bpp(); #else diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index b7384241fb0..35548e3c097 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -159,7 +159,7 @@ static struct platform_device smdkv310_lcd_lte480wv = { .dev.platform_data = &smdkv310_lcd_lte480wv_data, }; -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD static struct exynos_drm_fimd_pdata drm_fimd_pdata = { .panel = { .timing = { @@ -402,7 +402,7 @@ static void __init smdkv310_machine_init(void) samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup)); -#ifdef CONFIG_DRM_EXYNOS +#ifdef CONFIG_DRM_EXYNOS_FIMD s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; exynos4_fimd0_gpio_setup_24bpp(); #else diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 4ca8ff14a5b..c5c840e947b 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -198,7 +198,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; - if (!soc_is_exynos5250()) + if (!(soc_is_exynos5250() || soc_is_exynos5440())) scu_enable(scu_base_addr()); /* diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index e8c0473c756..579023f59dc 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, unsigned long rate_ckih2) { int i; + u32 val; struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); @@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, imx_print_silicon_rev("i.MX51", mx51_revision()); clk_disable_unprepare(clk[iim_gate]); + /* + * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no + * longer supported. Set to one for better power saving. + * + * The effect of not setting these bits is that MIPI clocks can't be + * enabled without the IPU clock being enabled aswell. + */ + val = readl(MXC_CCM_CCDR); + val |= 1 << 18; + writel(val, MXC_CCM_CCDR); + + val = readl(MXC_CCM_CLPCR); + val |= 1 << 23; + writel(val, MXC_CCM_CLPCR); + return 0; } diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 508404ddd4e..11bd01d402f 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 98070370d60..c66129b5dd1 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -240,7 +240,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui) macaddr[4] = (val >> 8) & 0xff; macaddr[5] = (val >> 0) & 0xff; - prom_update_property(np, newmac); + of_update_property(np, newmac); } } diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 5ccdf53c5a9..98167a4319f 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> +#include <linux/mtd/fsmc.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> #include <linux/i2c.h> @@ -33,7 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <mach/fsmc.h> #include <mach/irqs.h> #include "cpu-8815.h" @@ -42,39 +42,34 @@ #define SRC_CR_INIT_MASK 0x00007fff #define SRC_CR_INIT_VAL 0x2aaa8000 +#define ALE_OFF 0x1000000 +#define CLE_OFF 0x800000 + /* These addresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { + .name = "nand_data", + .start = 0x40000000, + .end = 0x40000000 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { .name = "nand_addr", - .start = NAND_IO_ADDR, - .end = NAND_IO_ADDR + 0xfff, + .start = 0x40000000 + ALE_OFF, + .end = 0x40000000 +ALE_OFF + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { .name = "nand_cmd", - .start = NAND_IO_CMD, - .end = NAND_IO_CMD + 0xfff, + .start = 0x40000000 + CLE_OFF, + .end = 0x40000000 + CLE_OFF + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .name = "nand_data", - .start = NAND_IO_DATA, - .end = NAND_IO_DATA + 0xfff, + .name = "fsmc_regs", + .start = NOMADIK_FSMC_BASE, + .end = NOMADIK_FSMC_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, - } + }, }; -static int nhk8815_nand_init(void) -{ - /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */ - writel(0x0000000E, FSMC_PCR(0)); - writel(0x000D0A00, FSMC_PMEM(0)); - writel(0x00100A00, FSMC_PATT(0)); - - /* enable access to the chip select area */ - writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0)); - - return 0; -} - /* * These partitions are the same as those used in the 2.6.20 release * shipped by the vendor; the first two partitions are mandated @@ -108,20 +103,28 @@ static struct mtd_partition nhk8815_partitions[] = { } }; -static struct nomadik_nand_platform_data nhk8815_nand_data = { - .parts = nhk8815_partitions, - .nparts = ARRAY_SIZE(nhk8815_partitions), - .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING, - .init = nhk8815_nand_init, +static struct fsmc_nand_timings nhk8815_nand_timings = { + .thiz = 0, + .thold = 0x10, + .twait = 0x0A, + .tset = 0, +}; + +static struct fsmc_nand_platform_data nhk8815_nand_platform_data = { + .nand_timings = &nhk8815_nand_timings, + .partitions = nhk8815_partitions, + .nr_partitions = ARRAY_SIZE(nhk8815_partitions), + .width = FSMC_NAND_BW8, }; static struct platform_device nhk8815_nand_device = { - .name = "nomadik_nand", - .dev = { - .platform_data = &nhk8815_nand_data, + .name = "fsmc-nand", + .id = -1, + .resource = nhk8815_nand_resources, + .num_resources = ARRAY_SIZE(nhk8815_nand_resources), + .dev = { + .platform_data = &nhk8815_nand_platform_data, }, - .resource = nhk8815_nand_resources, - .num_resources = ARRAY_SIZE(nhk8815_nand_resources), }; /* These are the partitions for the OneNand device, different from above */ @@ -176,6 +179,10 @@ static struct platform_device nhk8815_onenand_device = { .num_resources = ARRAY_SIZE(nhk8815_onenand_resource), }; +/* bus control reg. and bus timing reg. for CS0..CS3 */ +#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3)) +#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04) + static void __init nhk8815_onenand_init(void) { #ifdef CONFIG_MTD_ONENAND diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h deleted file mode 100644 index 8c2c0518368..00000000000 --- a/arch/arm/mach-nomadik/include/mach/fsmc.h +++ /dev/null @@ -1,29 +0,0 @@ - -/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */ - -#ifndef __ASM_ARCH_FSMC_H -#define __ASM_ARCH_FSMC_H - -#include <mach/hardware.h> -/* - * Register list - */ - -/* bus control reg. and bus timing reg. for CS0..CS3 */ -#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3)) -#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04) - -/* PC-card and NAND: - * PCR = control register - * PMEM = memory timing - * PATT = attribute timing - * PIO = I/O timing - * PECCR = ECC result - */ -#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00) -#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08) -#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c) -#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10) -#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14) - -#endif /* __ASM_ARCH_FSMC_H */ diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 3e8ead67e45..24d2f2df11a 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -112,17 +112,6 @@ static void __init mipid_dev_init(void) omapfb_set_lcd_config(&nokia770_lcd_config); } -static void __init ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN_GPIO); -} - static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -131,7 +120,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, + .gpio_pendown = ADS7846_PENDOWN_GPIO, }; static struct spi_board_info nokia770_spi_board_info[] __initdata = { @@ -241,7 +230,6 @@ static void __init omap_nokia770_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); hwa742_dev_init(); - ads7846_dev_init(); mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index be0f62bf903..41b581fd021 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC config SOC_HAS_REALTIME_COUNTER bool "Real time free running counter" + depends on SOC_OMAP5 + default y config ARCH_OMAP2 bool "TI OMAP2" @@ -79,7 +81,6 @@ config SOC_OMAP5 select ARM_GIC select CPU_V7 select HAVE_SMP - select SOC_HAS_REALTIME_COUNTER select COMMON_CLK comment "OMAP Core Type" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7b201546834..bb73afc9ac1 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device sdp3430_dvi_device = { diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4be58fd071f..f81a303b87f 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c8e37dc0089..b3102c2f4a3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = CM_T35_DVI_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device cm_t35_dvi_device = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7667eb74952..12865af25d3 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 9a3878ec225..3be1311f9e3 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,14 +27,12 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> #include <linux/mfd/menelaus.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <linux/omap-dma.h> -#include <plat/debug-devices.h> - #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,11 +40,9 @@ #include "mux.h" #include "control.h" #include "gpmc.h" +#include "gpmc-smc91x.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +327,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index a4e167c55c1..0abb30fe399 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -16,10 +16,12 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/stddef.h> #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <linux/platform_data/i2c-cbus-gpio.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <linux/mfd/menelaus.h> @@ -40,6 +42,45 @@ #define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f +#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +static struct i2c_cbus_platform_data n8x0_cbus_data = { + .clk_gpio = 66, + .dat_gpio = 65, + .sel_gpio = 64, +}; + +static struct platform_device n8x0_cbus_device = { + .name = "i2c-cbus-gpio", + .id = 3, + .dev = { + .platform_data = &n8x0_cbus_data, + }, +}; + +static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = { + { + I2C_BOARD_INFO("retu-mfd", 0x01), + }, +}; + +static void __init n8x0_cbus_init(void) +{ + const int retu_irq_gpio = 108; + + if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) + return; + irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio); + i2c_register_board_info(3, n8x0_i2c_board_info_3, + ARRAY_SIZE(n8x0_i2c_board_info_3)); + platform_device_register(&n8x0_cbus_device); +} +#else /* CONFIG_I2C_CBUS_GPIO */ +static void __init n8x0_cbus_init(void) +{ +} +#endif /* CONFIG_I2C_CBUS_GPIO */ + #if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and @@ -678,6 +719,7 @@ static void __init n8x0_init_machine(void) gpmc_onenand_init(board_onenand_data); n8x0_mmc_init(); n8x0_usb_init(); + n8x0_cbus_init(); } MACHINE_START(NOKIA_N800, "Nokia N800") diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 54647d6286b..3985f35aee0 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d8638b3b4f9..53a6cbcf974 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = DSS_ENABLE_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_stalker_dvi_device = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 60529e0b3d6..cf07e289b4e 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -256,6 +256,11 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static struct platform_device rx51_battery_device = { + .name = "rx51-battery", + .id = -1, +}; + static void rx51_charger_set_power(bool on) { gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); @@ -277,6 +282,7 @@ static void __init rx51_charger_init(void) WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, GPIOF_OUT_INIT_HIGH, "isp1704_reset")); + platform_device_register(&rx51_battery_device); platform_device_register(&rx51_charger_device); } diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index aa56c3e5bb3..5789a5e2556 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -40,6 +40,14 @@ #define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1 +/* + * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section + * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK + * must be set to 196.608 MHz" and hence, the DPLL locked frequency is + * half of this value. + */ +#define OMAP4_DPLL_ABE_DEFFREQ 98304000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .m4xen_mask = OMAP4430_DPLL_REGM4XEN_MASK, + .lpmode_mask = OMAP4430_DPLL_LPMODE_EN_MASK, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, @@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = { static const char *dpll_core_ck_parents[] = { - "sys_clkin_ck", + "sys_clkin_ck", "core_hsd_byp_clk_mux_ck" }; static struct clk dpll_core_ck; @@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT, OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL); -DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", - &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, - OMAP4430_CLKSEL_0_1_MASK); +DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, + 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT, + OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT, @@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = { .min_divider = 1, }; +static const char *dpll_iva_ck_parents[] = { + "sys_clkin_ck", "iva_hsd_byp_clk_mux_ck" +}; + static struct clk dpll_iva_ck; +static const struct clk_ops dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, +}; + static struct clk_hw_omap dpll_iva_ck_hw = { .hw = { .clk = &dpll_iva_ck, @@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops); static const char *dpll_iva_x2_ck_parents[] = { "dpll_iva_ck", @@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = { .min_divider = 1, }; +static const char *dpll_mpu_ck_parents[] = { + "sys_clkin_ck", "div_mpu_hs_clk" +}; + static struct clk dpll_mpu_ck; static struct clk_hw_omap dpll_mpu_ck_hw = { @@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops); DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2); @@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = { .min_divider = 1, }; +static const char *dpll_per_ck_parents[] = { + "sys_clkin_ck", "per_hsd_byp_clk_mux_ck" +}; static struct clk dpll_per_ck; @@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops); DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0, OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT, @@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = { .min_divider = 1, }; +static const char *dpll_usb_ck_parents[] = { + "sys_clkin_ck", "usb_hs_clk_div_ck" +}; + static struct clk dpll_usb_ck; static struct clk_hw_omap dpll_usb_ck_hw = { @@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops); static const char *dpll_usb_clkdcoldo_ck_parents[] = { "dpll_usb_ck", @@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0, OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL); +static const char *dbgclk_mux_ck_parents[] = { + "sys_clkin_ck" +}; + static struct clk dbgclk_mux_ck; DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL); -DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents, +DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents, dpll_usb_clkdcoldo_ck_ops); /* Leaf clocks controlled by modules */ @@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; @@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void) { u32 cpu_clkflg; struct omap_clk *c; + int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; @@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void) omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); + /* + * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power + * state when turning the ABE clock domain. Workaround this by + * locking the ABE DPLL on boot. + */ + if (cpu_is_omap446x()) { + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); + } + return 0; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9917f793c3b..b40204837bd 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -195,6 +195,10 @@ struct clksel { * @enable_mask: mask of the DPLL mode bitfield in @control_reg * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() * @max_multiplier: maximum valid non-bypass multiplier value (actual) * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() * @min_divider: minimum valid non-bypass divider value (actual) @@ -205,6 +209,8 @@ struct clksel { * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs @@ -233,6 +239,8 @@ struct dpll_data { u32 enable_mask; unsigned long last_rounded_rate; u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; u16 max_multiplier; u8 last_rounded_n; u8 min_divider; @@ -245,6 +253,8 @@ struct dpll_data { u32 idlest_mask; u32 dco_mask; u32 sddiv_mask; + u32 lpmode_mask; + u32 m4xen_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 384873580b2..7faf82d4e85 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) spin_lock_irqsave(&clkdm->lock, flags); /* corner case: disabling unused clocks */ - if (__clk_get_enable_count(clk) == 0) + if ((__clk_get_enable_count(clk) == 0) && + (atomic_read(&clkdm->usecount) == 0)) goto ccd_exit; if (atomic_read(&clkdm->usecount) == 0) { diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 5c2fd4863b2..2dabb9ecb98 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -16,8 +16,6 @@ #include <linux/init.h> #include <linux/platform_data/dsp-omap.h> -#include <plat/vram.h> - #include "common.h" #include "omap-secure.h" @@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { - omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); omap_barrier_reserve_memblock(); diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bca7a888570..22590dbe8f1 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -40,6 +40,8 @@ struct omap3_idle_statedata { u32 core_state; }; +static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; + static struct omap3_idle_statedata omap3_idle_data[] = { { .mpu_state = PWRDM_POWER_ON, @@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; +/* Private functions */ static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -260,11 +262,11 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, return ret; } -DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); +static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -struct cpuidle_driver omap3_idle_driver = { - .name = "omap3_idle", - .owner = THIS_MODULE, +static struct cpuidle_driver omap3_idle_driver = { + .name = "omap3_idle", + .owner = THIS_MODULE, .states = { { .enter = omap3_enter_idle_bm, @@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* Public functions */ + /** * omap3_idle_init - Init routine for OMAP3 idle * diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 288bee6cbb7..d639aef0ded 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS]; static atomic_t abort_barrier; static bool cpu_done[NR_CPUS]; +/* Private functions */ + /** * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * @dev: cpuidle device @@ -161,9 +163,19 @@ fail: return index; } -DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + +static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); -struct cpuidle_driver omap4_idle_driver = { +static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, @@ -178,7 +190,7 @@ struct cpuidle_driver omap4_idle_driver = { .desc = "MPUSS ON" }, { - /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, @@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; -/* - * For each cpu, setup the broadcast timer because local timers - * stops for the states above C1. - */ -static void omap_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} +/* Public functions */ /** * omap4_idle_init - Init routine for OMAP4 idle diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 4abb8b5e9bc..5e304d0719a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -226,7 +226,7 @@ static struct platform_device omap3isp_device = { }; static struct omap_iommu_arch_data omap3_isp_iommu = { - .name = "isp", + .name = "mmu_isp", }; int omap3_init_camera(struct isp_platform_data *pdata) diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index bebd7eda6f7..0a02aab5df6 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -291,16 +291,13 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) /* * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * @freqsel: FREQSEL value to set + * @clk: struct clk * of DPLL to set + * @freqsel: FREQSEL value to set * - * Program the DPLL with the supplied M, N values, and wait for the DPLL to - * lock.. Returns -EINVAL upon error, or 0 upon success. + * Program the DPLL with the last M, N values calculated, and wait for + * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success. */ -static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, - u16 freqsel) +static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) { struct dpll_data *dd = clk->dpll_data; u8 dco, sd_div; @@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, /* Set DPLL multiplier, divider */ v = __raw_readl(dd->mult_div1_reg); v &= ~(dd->mult_mask | dd->div1_mask); - v |= m << __ffs(dd->mult_mask); - v |= (n - 1) << __ffs(dd->div1_mask); + v |= dd->last_rounded_m << __ffs(dd->mult_mask); + v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); /* Configure dco and sd_div for dplls that have these fields */ if (dd->dco_mask) { - _lookup_dco(clk, &dco, m, n); + _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n); v &= ~(dd->dco_mask); v |= dco << __ffs(dd->dco_mask); } if (dd->sddiv_mask) { - _lookup_sddiv(clk, &sd_div, m, n); + _lookup_sddiv(clk, &sd_div, dd->last_rounded_m, + dd->last_rounded_n); v &= ~(dd->sddiv_mask); v |= sd_div << __ffs(dd->sddiv_mask); } __raw_writel(v, dd->mult_div1_reg); + /* Set 4X multiplier and low-power mode */ + if (dd->m4xen_mask || dd->lpmode_mask) { + v = __raw_readl(dd->control_reg); + + if (dd->m4xen_mask) { + if (dd->last_rounded_m4xen) + v |= dd->m4xen_mask; + else + v &= ~dd->m4xen_mask; + } + + if (dd->lpmode_mask) { + if (dd->last_rounded_lpmode) + v |= dd->lpmode_mask; + else + v &= ~dd->lpmode_mask; + } + + __raw_writel(v, dd->control_reg); + } + /* We let the clock framework set the other output dividers later */ /* REVISIT: Set ramp-up delay? */ @@ -491,8 +510,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, __clk_get_name(hw->clk), rate); - ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, - dd->last_rounded_n, freqsel); + ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; } diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index d3326c474fd..d28b0f72671 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -20,6 +20,15 @@ #include "clock44xx.h" #include "cm-regbits-44xx.h" +/* + * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that + * can supported when using the DPLL low-power mode. Frequencies are + * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control, + * Status, and Low-Power Operation Mode". + */ +#define OMAP4_DPLL_LP_FINT_MAX 1000000 +#define OMAP4_DPLL_LP_FOUT_MAX 100000000 + /* Supported only on OMAP4 */ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) { @@ -82,6 +91,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = { }; /** + * omap4_dpll_lpmode_recalc - compute DPLL low-power setting + * @dd: pointer to the dpll data structure + * + * Calculates if low-power mode can be enabled based upon the last + * multiplier and divider values calculated. If low-power mode can be + * enabled, then the bit to enable low-power mode is stored in the + * last_rounded_lpmode variable. This implementation is based upon the + * criteria for enabling low-power mode as described in the OMAP4430/60 + * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power + * Operation Mode". + */ +static void omap4_dpll_lpmode_recalc(struct dpll_data *dd) +{ + long fint, fout; + + fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1); + fout = fint * dd->last_rounded_m; + + if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX)) + dd->last_rounded_lpmode = 1; + else + dd->last_rounded_lpmode = 0; +} + +/** * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit * @clk: struct clk * of the DPLL to compute the rate for * @@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, unsigned long *parent_rate) { struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; struct dpll_data *dd; long r; @@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, dd = clk->dpll_data; - /* regm4xen adds a multiplier of 4 to DPLL calculations */ - v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK; - - if (v) - target_rate = target_rate / OMAP4430_REGM4XEN_MULT; + dd->last_rounded_m4xen = 0; + /* + * First try to compute the DPLL configuration for + * target rate without using the 4X multiplier. + */ r = omap2_dpll_round_rate(hw, target_rate, NULL); + if (r != ~0) + goto out; + + /* + * If we did not find a valid DPLL configuration, try again, but + * this time see if using the 4X multiplier can help. Enabling the + * 4X multiplier is equivalent to dividing the target rate by 4. + */ + r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT, + NULL); if (r == ~0) return r; - if (v) - clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + dd->last_rounded_m4xen = 1; + +out: + omap4_dpll_lpmode_recalc(dd); - return clk->dpll_data->last_rounded_rate; + return dd->last_rounded_rate; } diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index fbb9b152cd5..b9074dde3b9 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -22,6 +22,7 @@ #include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" +#include "omap-pm.h" #include "prm.h" #include "common.h" @@ -120,6 +121,16 @@ static int __init omap_i2c_nr_ports(void) return ports; } +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static const char name[] = "omap_i2c"; int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, @@ -157,6 +168,15 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 26126343d6a..6a217c98db5 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, old_mode = omap_mux_read(partition, gpio_mux->reg_offset); mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); - if (partition->flags & OMAP_MUX_GPIO_IN_MODE3) - mux_mode |= OMAP_MUX_MODE3; - else - mux_mode |= OMAP_MUX_MODE4; + mux_mode |= partition->gpio; pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__, gpio_mux->muxnames[0], gpio, old_mode, mux_mode); omap_mux_write(partition, mux_mode, gpio_mux->reg_offset); @@ -800,7 +797,7 @@ int __init omap_mux_late_init(void) struct omap_mux *m = &e->mux; u16 mode = omap_mux_read(partition, m->reg_offset); - if (OMAP_MODE_GPIO(mode)) + if (OMAP_MODE_GPIO(partition, mode)) continue; #ifndef CONFIG_DEBUG_FS @@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition, } #else /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(omap_mux_read(partition, + if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition, superset->reg_offset))) { superset++; continue; @@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags, partition->name = name; partition->flags = flags; + partition->gpio = flags & OMAP_MUX_MODE7; partition->size = mux_size; partition->phys = mux_pbase; partition->base = ioremap(mux_pbase, mux_size); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 76f9b3c2f58..fdb22f14021 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -58,7 +58,8 @@ #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN -#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \ + partition->gpio) #define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ @@ -79,13 +80,20 @@ /* * omap_mux_init flags definition: * + * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control + * register which includes values from 0-7. * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. * The default value is 16 bits. - * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3. - * The default is mode4. */ -#define OMAP_MUX_REG_8BIT (1 << 0) -#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1) +#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0 +#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1 +#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2 +#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3 +#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4 +#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5 +#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6 +#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7 +#define OMAP_MUX_REG_8BIT (1 << 3) /** * struct omap_board_data - board specific device data @@ -105,6 +113,7 @@ struct omap_board_data { * struct mux_partition - contain partition related information * @name: name of the current partition * @flags: flags specific to this partition + * @gpio: gpio mux mode * @phys: physical address * @size: partition size * @base: virtual address after ioremap @@ -114,6 +123,7 @@ struct omap_board_data { struct omap_mux_partition { const char *name; u32 flags; + u32 gpio; u32 phys; u32 size; void __iomem *base; diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index c47140bbbec..c53609f4629 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) return -EINVAL; } - return omap_mux_init("core", 0, + return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4, OMAP3_CONTROL_PADCONF_MUX_PBASE, OMAP3_CONTROL_PADCONF_MUX_SIZE, omap3_muxmodes, package_subset, board_subset, diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index a6a4ff8744b..6da4f7ae9d7 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -12,153 +12,60 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/slab.h> #include <linux/platform_data/iommu-omap.h> +#include "omap_hwmod.h" +#include "omap_device.h" -#include "soc.h" -#include "common.h" - -struct iommu_device { - resource_size_t base; - int irq; - struct iommu_platform_data pdata; - struct resource res[2]; -}; -static struct iommu_device *devices; -static int num_iommu_devices; - -#ifdef CONFIG_ARCH_OMAP3 -static struct iommu_device omap3_devices[] = { - { - .base = 0x480bd400, - .irq = 24 + OMAP_INTC_START, - .pdata = { - .name = "isp", - .nr_tlb_entries = 8, - .clk_name = "cam_ick", - .da_start = 0x0, - .da_end = 0xFFFFF000, - }, - }, -#if defined(CONFIG_OMAP_IOMMU_IVA2) - { - .base = 0x5d000000, - .irq = 28 + OMAP_INTC_START, - .pdata = { - .name = "iva2", - .nr_tlb_entries = 32, - .clk_name = "iva2_ck", - .da_start = 0x11000000, - .da_end = 0xFFFFF000, - }, - }, -#endif -}; -#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices) -static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; -#else -#define omap3_devices NULL -#define NR_OMAP3_IOMMU_DEVICES 0 -#define omap3_iommu_pdev NULL -#endif - -#ifdef CONFIG_ARCH_OMAP4 -static struct iommu_device omap4_devices[] = { - { - .base = OMAP4_MMU1_BASE, - .irq = 100 + OMAP44XX_IRQ_GIC_START, - .pdata = { - .name = "ducati", - .nr_tlb_entries = 32, - .clk_name = "ipu_fck", - .da_start = 0x0, - .da_end = 0xFFFFF000, - }, - }, - { - .base = OMAP4_MMU2_BASE, - .irq = 28 + OMAP44XX_IRQ_GIC_START, - .pdata = { - .name = "tesla", - .nr_tlb_entries = 32, - .clk_name = "dsp_fck", - .da_start = 0x0, - .da_end = 0xFFFFF000, - }, - }, -}; -#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) -static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; -#else -#define omap4_devices NULL -#define NR_OMAP4_IOMMU_DEVICES 0 -#define omap4_iommu_pdev NULL -#endif - -static struct platform_device **omap_iommu_pdev; - -static int __init omap_iommu_init(void) +static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused) { - int i, err; - struct resource res[] = { - { .flags = IORESOURCE_MEM }, - { .flags = IORESOURCE_IRQ }, - }; + struct platform_device *pdev; + struct iommu_platform_data *pdata; + struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr; + static int i; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->name = oh->name; + pdata->nr_tlb_entries = a->nr_tlb_entries; + pdata->da_start = a->da_start; + pdata->da_end = a->da_end; + + if (oh->rst_lines_cnt == 1) { + pdata->reset_name = oh->rst_lines->name; + pdata->assert_reset = omap_device_assert_hardreset; + pdata->deassert_reset = omap_device_deassert_hardreset; + } - if (cpu_is_omap34xx()) { - devices = omap3_devices; - omap_iommu_pdev = omap3_iommu_pdev; - num_iommu_devices = NR_OMAP3_IOMMU_DEVICES; - } else if (cpu_is_omap44xx()) { - devices = omap4_devices; - omap_iommu_pdev = omap4_iommu_pdev; - num_iommu_devices = NR_OMAP4_IOMMU_DEVICES; - } else - return -ENODEV; + pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata), + NULL, 0, 0); - for (i = 0; i < num_iommu_devices; i++) { - struct platform_device *pdev; - const struct iommu_device *d = &devices[i]; + kfree(pdata); - pdev = platform_device_alloc("omap-iommu", i); - if (!pdev) { - err = -ENOMEM; - goto err_out; - } + if (IS_ERR(pdev)) { + pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev)); + return PTR_ERR(pdev); + } - res[0].start = d->base; - res[0].end = d->base + MMU_REG_SIZE - 1; - res[1].start = res[1].end = d->irq; + i++; - err = platform_device_add_resources(pdev, res, - ARRAY_SIZE(res)); - if (err) - goto err_out; - err = platform_device_add_data(pdev, &d->pdata, - sizeof(d->pdata)); - if (err) - goto err_out; - err = platform_device_add(pdev); - if (err) - goto err_out; - omap_iommu_pdev[i] = pdev; - } return 0; +} -err_out: - while (i--) - platform_device_put(omap_iommu_pdev[i]); - return err; +static int __init omap_iommu_init(void) +{ + return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL); } /* must be ready before omap3isp is probed */ subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { - int i; - - for (i = 0; i < num_iommu_devices; i++) - platform_device_unregister(omap_iommu_pdev[i]); + /* Do nothing */ } module_exit(omap_iommu_exit); diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 6c8fa70ddad..d2d3840557c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -77,8 +77,7 @@ static struct omap_hwmod_class i2c_class = { static struct omap_i2c_dev_attr i2c_dev_attr = { .fifo_depth = 8, /* bytes */ - .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | - OMAP_I2C_FLAG_BUS_SHIFT_2 | + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 | OMAP_I2C_FLAG_FORCE_19200_INT_CLK, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 32820d89f5b..081c71edddf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1118,8 +1118,7 @@ static struct omap_hwmod_class i2c_class = { }; static struct omap_i2c_dev_attr i2c_dev_attr = { - .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE | - OMAP_I2C_FLAG_RESET_REGS_POSTIDLE, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, }; /* i2c1 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ec4499e5a4c..8bb2628df34 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -794,9 +794,7 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { /* I2C1 */ static struct omap_i2c_dev_attr i2c1_dev_attr = { .fifo_depth = 8, /* bytes */ - .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | - OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | - OMAP_I2C_FLAG_BUS_SHIFT_2, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod omap3xxx_i2c1_hwmod = { @@ -821,9 +819,7 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = { /* I2C2 */ static struct omap_i2c_dev_attr i2c2_dev_attr = { .fifo_depth = 8, /* bytes */ - .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | - OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | - OMAP_I2C_FLAG_BUS_SHIFT_2, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod omap3xxx_i2c2_hwmod = { @@ -848,9 +844,7 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = { /* I2C3 */ static struct omap_i2c_dev_attr i2c3_dev_attr = { .fifo_depth = 64, /* bytes */ - .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | - OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | - OMAP_I2C_FLAG_BUS_SHIFT_2, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1b5890380b1..129d5081ed1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -652,7 +652,7 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .mpu_irqs = omap44xx_dsp_irqs, .rst_lines = omap44xx_dsp_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_resets), - .main_clk = "dsp_fck", + .main_clk = "dpll_iva_m4x2_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, @@ -1528,8 +1528,7 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { }; static struct omap_i2c_dev_attr i2c_dev_attr = { - .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE | - OMAP_I2C_FLAG_RESET_REGS_POSTIDLE, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, }; /* i2c1 */ @@ -1679,7 +1678,7 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { .mpu_irqs = omap44xx_ipu_irqs, .rst_lines = omap44xx_ipu_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets), - .main_clk = "ipu_fck", + .main_clk = "ducati_clk_mux_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 93d102535c8..04fdbc4c499 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,8 +27,7 @@ #include <linux/pm_runtime.h> #include <linux/console.h> #include <linux/omap-dma.h> - -#include <plat/omap-serial.h> +#include <linux/platform_data/serial-omap.h> #include "common.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 7016637b531..691aa674665 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -175,7 +175,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, continue; } - prom_add_property(np, &device_disabled); + of_add_property(np, &device_disabled); return np; } @@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, * kernel registering these devices remove them dynamically from the device * tree on boot. */ -void __init omap_dmtimer_init(void) +static void __init omap_dmtimer_init(void) { struct device_node *np; @@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void) * * Get the timer errata flags that are specific to the OMAP device being used. */ -u32 __init omap_dm_timer_get_errata(void) +static u32 __init omap_dm_timer_get_errata(void) { if (cpu_is_omap24xx()) return 0; @@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = { }; /* Setup free-running counter for clocksource */ -static int __init omap2_sync32k_clocksource_init(void) +static int __init __maybe_unused omap2_sync32k_clocksource_init(void) { int ret; struct device_node *np = NULL; diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index d1dbe125b34..2e44e8a2288 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); + + if (omap_rev() <= OMAP3430_REV_ES2_1) + usbhs_data.single_ulpi_bypass = true; + } else if (cpu_is_omap44xx()) { setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 124bce6b4d7..a301e61a555 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -47,7 +47,7 @@ #define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000 #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 1a6f8577744..803711e283b 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -149,25 +149,6 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, }, { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, - }, { -#ifdef CONFIG_CPU_S3C6410 - .name = "iis", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, - }, { -#endif .name = "keypad", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, @@ -337,6 +318,32 @@ static struct clk clk_48m_spi1 = { .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, }; +static struct clk clk_i2s0 = { + .name = "iis", + .devname = "samsung-i2s.0", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS0, +}; + +static struct clk clk_i2s1 = { + .name = "iis", + .devname = "samsung-i2s.1", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS1, +}; + +#ifdef CONFIG_CPU_S3C6410 +static struct clk clk_i2s2 = { + .name = "iis", + .devname = "samsung-i2s.2", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, +}; +#endif + static struct clk init_clocks[] = { { .name = "lcd", @@ -660,6 +667,7 @@ static struct clksrc_sources clkset_audio1 = { .nr_sources = ARRAY_SIZE(clkset_audio1_list), }; +#ifdef CONFIG_CPU_S3C6410 static struct clk *clkset_audio2_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_dout_mpll, @@ -672,6 +680,7 @@ static struct clksrc_sources clkset_audio2 = { .sources = clkset_audio2_list, .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; +#endif static struct clksrc_clk clksrcs[] = { { @@ -685,36 +694,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_uhost, }, { .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, - .sources = &clkset_audio0, - }, { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.1", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, - .sources = &clkset_audio1, - }, { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.2", - .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, - .sources = &clkset_audio2, - }, { - .clk = { .name = "irda-bus", .ctrlbit = S3C_CLKCON_SCLK_IRDA, .enable = s3c64xx_sclk_ctrl, @@ -805,6 +784,43 @@ static struct clksrc_clk clk_sclk_spi1 = { .sources = &clkset_spi_mmc, }; +static struct clksrc_clk clk_audio_bus0 = { + .clk = { + .name = "audio-bus", + .devname = "samsung-i2s.0", + .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, + .sources = &clkset_audio0, +}; + +static struct clksrc_clk clk_audio_bus1 = { + .clk = { + .name = "audio-bus", + .devname = "samsung-i2s.1", + .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, + .sources = &clkset_audio1, +}; + +#ifdef CONFIG_CPU_S3C6410 +static struct clksrc_clk clk_audio_bus2 = { + .clk = { + .name = "audio-bus", + .devname = "samsung-i2s.2", + .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, + .sources = &clkset_audio2, +}; +#endif /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { @@ -820,6 +836,8 @@ static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_mmc2, &clk_sclk_spi0, &clk_sclk_spi1, + &clk_audio_bus0, + &clk_audio_bus1, }; static struct clk *clk_cdev[] = { @@ -828,6 +846,8 @@ static struct clk *clk_cdev[] = { &clk_hsmmc2, &clk_48m_spi0, &clk_48m_spi1, + &clk_i2s0, + &clk_i2s1, }; static struct clk_lookup s3c64xx_clk_lookup[] = { @@ -844,6 +864,14 @@ static struct clk_lookup s3c64xx_clk_lookup[] = { CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk), + CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), + CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk), +#ifdef CONFIG_CPU_S3C6410 + CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), + CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk), +#endif }; #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index 35f3e07eacc..e367e87bbc2 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -23,11 +23,6 @@ #include <linux/platform_data/asoc-s3c.h> #include <plat/gpio-cfg.h> -static const char *rclksrc[] = { - [0] = "iis", - [1] = "audio-bus", -}; - static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) { unsigned int base; @@ -64,11 +59,6 @@ static struct resource s3c64xx_iis0_resource[] = { static struct s3c_audio_pdata i2sv3_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, - .type = { - .i2s = { - .src_clk = rclksrc, - }, - }, }; struct platform_device s3c64xx_device_iis0 = { @@ -110,7 +100,6 @@ static struct s3c_audio_pdata i2sv4_pdata = { .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN, - .src_clk = rclksrc, }, }, }; diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 000445596ec..5112371079d 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -243,12 +243,6 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 25), }, { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), - }, { .name = "dsim", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, @@ -405,15 +399,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_group1, .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio2", - .ctrlbit = (1 << 11), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, }, }; @@ -464,6 +449,26 @@ static struct clksrc_clk clk_sclk_uclk = { .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, }; +static struct clk clk_i2s0 = { + .name = "iis", + .devname = "samsung-i2s.0", + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), +}; + +static struct clksrc_clk clk_audio_bus2 = { + .clk = { + .name = "sclk_audio2", + .devname = "samsung-i2s.0", + .ctrlbit = (1 << 11), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_audio, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, +}; + static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", @@ -506,13 +511,18 @@ static struct clk dummy_apb_pclk = { .id = -1, }; +static struct clk *clk_cdev[] = { + &clk_i2s0, +}; + static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_uclk, &clk_sclk_spi0, &clk_sclk_spi1, &clk_sclk_mmc0, &clk_sclk_mmc1, - &clk_sclk_mmc2 + &clk_sclk_mmc2, + &clk_audio_bus2, }; static struct clk_lookup s5p6440_clk_lookup[] = { @@ -524,6 +534,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus2.clk), }; void __init_or_cpufreq s5p6440_setup_clocks(void) @@ -596,12 +608,17 @@ static struct clk *clks[] __initdata = { void __init s5p6440_register_clocks(void) { int ptr; + unsigned int cnt; s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) + s3c_disable_clocks(clk_cdev[cnt], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index f3e0ef3d27c..154dea702d7 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -247,24 +247,6 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), }, { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 16), - }, { .name = "i2c", .devname = "s3c2440-i2c.1", .parent = &clk_pclk_low.clk, @@ -402,6 +384,7 @@ static struct clksrc_sources clkset_sclk_audio0 = { static struct clksrc_clk clk_sclk_audio0 = { .clk = { .name = "audio-bus", + .devname = "samsung-i2s.0", .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 8), .parent = &clk_dout_epll.clk, @@ -549,6 +532,36 @@ static struct clksrc_clk clk_sclk_spi1 = { .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, }; +static struct clk clk_i2s0 = { + .name = "iis", + .devname = "samsung-i2s.0", + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), +}; + +static struct clk clk_i2s1 = { + .name = "iis", + .devname = "samsung-i2s.1", + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 15), +}; + +static struct clk clk_i2s2 = { + .name = "iis", + .devname = "samsung-i2s.2", + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 16), +}; + +static struct clk *clk_cdev[] = { + &clk_i2s0, + &clk_i2s1, + &clk_i2s2, +}; + static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_uclk, &clk_sclk_spi0, @@ -556,6 +569,7 @@ static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_mmc0, &clk_sclk_mmc1, &clk_sclk_mmc2, + &clk_sclk_audio0, }; static struct clk_lookup s5p6450_clk_lookup[] = { @@ -567,6 +581,10 @@ static struct clk_lookup s5p6450_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_sclk_audio0.clk), + CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), + CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), }; /* Clock initialization code */ @@ -584,7 +602,6 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk, &clk_hclk_low, &clk_pclk_low, - &clk_sclk_audio0, }; static struct clk dummy_apb_pclk = { @@ -661,10 +678,16 @@ void __init_or_cpufreq s5p6450_setup_clocks(void) void __init s5p6450_register_clocks(void) { int ptr; + unsigned int cnt; for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) + s3c_disable_clocks(clk_cdev[cnt], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c index a0d6edfd23a..723d4773c32 100644 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -19,11 +19,6 @@ #include <mach/dma.h> #include <mach/irqs.h> -static const char *rclksrc[] = { - [0] = "iis", - [1] = "sclk_audio2", -}; - static int s5p6440_cfg_i2s(struct platform_device *pdev) { switch (pdev->id) { @@ -45,7 +40,6 @@ static struct s3c_audio_pdata s5p6440_i2s_pdata = { .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN, - .src_clk = rclksrc, }, }, }; @@ -93,7 +87,6 @@ static struct s3c_audio_pdata s5p6450_i2s0_pdata = { .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN, - .src_clk = rclksrc, }, }, }; @@ -110,11 +103,6 @@ struct platform_device s5p6450_device_iis0 = { static struct s3c_audio_pdata s5p6450_i2s_pdata = { .cfg_gpio = s5p6450_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc, - }, - }, }; static struct resource s5p6450_i2s1_resource[] = { diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 926219791f0..a206dc35eff 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -606,24 +606,6 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 13), }, { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 2), - }, { .name = "ac97", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, @@ -724,6 +706,30 @@ static struct clk clk_48m_spi2 = { .ctrlbit = (1 << 9), }; +static struct clk clk_i2s0 = { + .name = "iis", + .devname = "samsung-i2s.0", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk clk_i2s1 = { + .name = "iis", + .devname = "samsung-i2s.1", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk clk_i2s2 = { + .name = "iis", + .devname = "samsung-i2s.2", + .parent = &clk_div_pclkd1.clk, + .enable = s5pc100_d1_5_ctrl, + .ctrlbit = (1 << 2), +}; + static struct clk clk_vclk54m = { .name = "vclk_54m", .rate = 54000000, @@ -1154,6 +1160,9 @@ static struct clk *clk_cdev[] = { &clk_48m_spi0, &clk_48m_spi1, &clk_48m_spi2, + &clk_i2s0, + &clk_i2s1, + &clk_i2s2, }; static struct clksrc_clk *clksrc_cdev[] = { @@ -1321,6 +1330,9 @@ static struct clk_lookup s5pc100_clk_lookup[] = { CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2), CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), + CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), + CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), + CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), }; void __init s5pc100_register_clocks(void) diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index 1cc252cef26..46f488b0939 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -39,18 +39,12 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev) return 0; } -static const char *rclksrc_v5[] = { - [0] = "iis", - [1] = "i2sclkd2", -}; - static struct s3c_audio_pdata i2sv5_pdata = { .cfg_gpio = s5pc100_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v5, }, }, }; @@ -72,18 +66,8 @@ struct platform_device s5pc100_device_iis0 = { }, }; -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - static struct s3c_audio_pdata i2sv3_pdata = { .cfg_gpio = s5pc100_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, }; static struct resource s5pc100_iis1_resource[] = { diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 0a5480bbcbd..addfb165c13 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -20,11 +20,6 @@ #include <mach/irqs.h> #include <mach/regs-audss.h> -static const char *rclksrc[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - static int s5pv210_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ @@ -52,7 +47,6 @@ static struct s3c_audio_pdata i2sv5_pdata = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc, .idma_addr = S5PV210_AUDSS_INT_MEM, }, }, @@ -75,18 +69,8 @@ struct platform_device s5pv210_device_iis0 = { }, }; -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "audio-bus", -}; - static struct s3c_audio_pdata i2sv3_pdata = { .cfg_gpio = s5pv210_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, }; static struct resource s5pv210_iis1_resource[] = { diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 9be910f7920..1dc8a92e5a5 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -80,8 +80,8 @@ static void __init sunxi_dt_init(void) } static const char * const sunxi_board_dt_compat[] = { - "allwinner,sun4i", - "allwinner,sun5i", + "allwinner,sun4i-a10", + "allwinner,sun5i-a13", NULL, }; diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 0816562725f..d54cfc54b9f 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { /* name parent rate enabled */ { "clk_m", NULL, 0, true }, - { "pll_p", "clk_m", 408000000, true }, + { "pll_p", "pll_ref", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, { "pll_p_out4", "pll_p", 102000000, true }, { "sclk", "pll_p_out4", 102000000, true }, diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index efc000e32e1..d7147779f8e 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = { static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index) { struct clk *d = clk_get_sys(NULL, "pll_d"); - /* The DSIB parent selection bit is in PLLD base - register - can not do direct r-m-w, must be - protected by PLLD lock */ + /* The DSIB parent selection bit is in PLLD base register */ tegra_clk_cfg_ex( d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index); diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 12f3994c43d..4ce77cdc31c 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -27,7 +27,6 @@ #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> @@ -250,6 +249,18 @@ static struct resource rtc_resources[] = { */ static struct resource fsmc_resources[] = { { + .name = "nand_addr", + .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE, + .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "nand_cmd", + .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE, + .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { .name = "nand_data", .start = U300_NAND_CS0_PHYS_BASE, .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, @@ -1492,8 +1503,6 @@ static struct fsmc_nand_platform_data nand_platform_data = { .nr_partitions = ARRAY_SIZE(u300_partitions), .options = NAND_SKIP_BBTSCAN, .width = FSMC_NAND_BW8, - .ale_off = PLAT_NAND_ALE, - .cle_off = PLAT_NAND_CLE, }; static struct platform_device nand_device = { @@ -1543,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = { pin_highz_conf), }; -struct u300_mux_hog { - struct device *dev; - struct pinctrl *p; -}; - -static struct u300_mux_hog u300_mux_hogs[] = { - { - .dev = &uart0_device.dev, - }, - { - .dev = &mmcsd_device.dev, - }, -}; - -static int __init u300_pinctrl_fetch(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { - struct pinctrl *p; - - p = pinctrl_get_select_default(u300_mux_hogs[i].dev); - if (IS_ERR(p)) { - pr_err("u300: could not get pinmux hog for dev %s\n", - dev_name(u300_mux_hogs[i].dev)); - continue; - } - u300_mux_hogs[i].p = p; - } - return 0; -} -subsys_initcall(u300_pinctrl_fetch); - /* * Notice that AMBA devices are initialized before platform devices. * diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c index 564f57d5d8a..7e1f294f043 100644 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -77,9 +77,6 @@ static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { * BU21013 ROHM touchscreen interface on the STUIBs */ -/* tracks number of bu21013 devices being enabled */ -static int bu21013_devices; - #define TOUCH_GPIO_PIN 84 #define TOUCH_XMAX 384 @@ -88,73 +85,8 @@ static int bu21013_devices; #define PRCMU_CLOCK_OCR 0x1CC #define TSC_EXT_CLOCK_9_6MHZ 0x840000 -/** - * bu21013_gpio_board_init : configures the touch panel. - * @reset_pin: reset pin number - * This function can be used to configures - * the voltage and reset the touch panel controller. - */ -static int bu21013_gpio_board_init(int reset_pin) -{ - int retval = 0; - - bu21013_devices++; - if (bu21013_devices == 1) { - retval = gpio_request(reset_pin, "touchp_reset"); - if (retval) { - printk(KERN_ERR "Unable to request gpio reset_pin"); - return retval; - } - retval = gpio_direction_output(reset_pin, 1); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - } - - return retval; -} - -/** - * bu21013_gpio_board_exit : deconfigures the touch panel controller - * @reset_pin: reset pin number - * This function can be used to deconfigures the chip selection - * for touch panel controller. - */ -static int bu21013_gpio_board_exit(int reset_pin) -{ - int retval = 0; - - if (bu21013_devices == 1) { - retval = gpio_direction_output(reset_pin, 0); - if (retval < 0) { - printk(KERN_ERR "%s: gpio direction failed\n", - __func__); - return retval; - } - gpio_set_value(reset_pin, 0); - } - bu21013_devices--; - - return retval; -} - -/** - * bu21013_read_pin_val : get the interrupt pin value - * This function can be used to get the interrupt pin value for touch panel - * controller. - */ -static int bu21013_read_pin_val(void) -{ - return gpio_get_value(TOUCH_GPIO_PIN); -} - static struct bu21013_platform_device tsc_plat_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), + .touch_pin = TOUCH_GPIO_PIN, .touch_x_max = TOUCH_XMAX, .touch_y_max = TOUCH_YMAX, .ext_clk = false, @@ -171,7 +103,6 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { I2C_BOARD_INFO("bu21013_tp", 0x5D), .platform_data = &tsc_plat_device, }, - }; void __init mop500_stuib_init(void) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 4b24c999265..a5e05f6e256 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -8,6 +8,7 @@ #ifndef __DEVICES_DB8500_H #define __DEVICES_DB8500_H +#include <linux/platform_data/usb-musb-ux500.h> #include <mach/irqs.h> #include "devices-common.h" diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index cd956647c21..7539ec27506 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -44,8 +44,10 @@ ENDPROC(v7_flush_icache_all) ENTRY(v7_flush_dcache_louis) dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr - ands r3, r0, #0xe00000 @ extract LoUIS from clidr - mov r3, r3, lsr #20 @ r3 = LoUIS * 2 + ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr + ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr + ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 + ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 mov r10, #0 @ r10 (starting level) = 0 b flush_levels @ start flushing cache levels diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 5383bc01857..6b2fb87c869 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1034,7 +1034,8 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, spin_unlock_irqrestore(&mapping->lock, flags); } -static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t gfp) +static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, + gfp_t gfp, struct dma_attrs *attrs) { struct page **pages; int count = size >> PAGE_SHIFT; @@ -1048,6 +1049,23 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t if (!pages) return NULL; + if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) + { + unsigned long order = get_order(size); + struct page *page; + + page = dma_alloc_from_contiguous(dev, count, order); + if (!page) + goto error; + + __dma_clear_buffer(page, size); + + for (i = 0; i < count; i++) + pages[i] = page + i; + + return pages; + } + while (count) { int j, order = __fls(count); @@ -1081,14 +1099,21 @@ error: return NULL; } -static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t size) +static int __iommu_free_buffer(struct device *dev, struct page **pages, + size_t size, struct dma_attrs *attrs) { int count = size >> PAGE_SHIFT; int array_size = count * sizeof(struct page *); int i; - for (i = 0; i < count; i++) - if (pages[i]) - __free_pages(pages[i], 0); + + if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) { + dma_release_from_contiguous(dev, pages[0], count); + } else { + for (i = 0; i < count; i++) + if (pages[i]) + __free_pages(pages[i], 0); + } + if (array_size <= PAGE_SIZE) kfree(pages); else @@ -1250,7 +1275,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, if (gfp & GFP_ATOMIC) return __iommu_alloc_atomic(dev, size, handle); - pages = __iommu_alloc_buffer(dev, size, gfp); + pages = __iommu_alloc_buffer(dev, size, gfp, attrs); if (!pages) return NULL; @@ -1271,7 +1296,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, err_mapping: __iommu_remove_mapping(dev, *handle, size); err_buffer: - __iommu_free_buffer(dev, pages, size); + __iommu_free_buffer(dev, pages, size, attrs); return NULL; } @@ -1327,7 +1352,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, } __iommu_remove_mapping(dev, handle, size); - __iommu_free_buffer(dev, pages, size); + __iommu_free_buffer(dev, pages, size, attrs); } static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 97fe69abdf5..a14a78a2f14 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -11,7 +11,6 @@ obj- := # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o -obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c deleted file mode 100644 index a609e216181..00000000000 --- a/arch/arm/plat-omap/debug-devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/debug-devices.c - * - * Copyright (C) 2005 Nokia Corporation - * Modified from mach-omap2/board-h4.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <plat/debug-devices.h> - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(led_resources), - .resource = led_resources, -}; - -static struct platform_device *debug_devices[] __initdata = { - &smc91x_device, - &led_device, - /* ps2 kbd + mouse ports */ - /* 4 extra uarts */ - /* 6 input dip switches */ - /* 8 output pins */ -}; - -int __init debug_card_init(u32 addr, unsigned gpio) -{ - int status; - - smc91x_resources[0].start = addr + 0x300; - smc91x_resources[0].end = addr + 0x30f; - - smc91x_resources[1].start = gpio_to_irq(gpio); - smc91x_resources[1].end = gpio_to_irq(gpio); - - status = gpio_request(gpio, "SMC91x irq"); - if (status < 0) { - printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); - return status; - } - gpio_direction_input(gpio); - - led_resources[0].start = addr; - led_resources[0].end = addr + SZ_4K - 1; - - return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); -} diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h deleted file mode 100644 index 8fc4287222d..00000000000 --- a/arch/arm/plat-omap/include/plat/debug-devices.h +++ /dev/null @@ -1,2 +0,0 @@ -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h deleted file mode 100644 index ff9b0aab528..00000000000 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Driver for OMAP-UART controller. - * Based on drivers/serial/8250.c - * - * Copyright (C) 2010 Texas Instruments. - * - * Authors: - * Govindraj R <govindraj.raja@ti.com> - * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __OMAP_SERIAL_H__ -#define __OMAP_SERIAL_H__ - -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/pm_qos.h> - -#define DRIVER_NAME "omap_uart" - -/* - * Use tty device name as ttyO, [O -> OMAP] - * in bootargs we specify as console=ttyO0 if uart1 - * is used as console uart. - */ -#define OMAP_SERIAL_NAME "ttyO" - -struct omap_uart_port_info { - bool dma_enabled; /* To specify DMA Mode */ - unsigned int uartclk; /* UART clock rate */ - upf_t flags; /* UPF_* flags */ - unsigned int dma_rx_buf_size; - unsigned int dma_rx_timeout; - unsigned int autosuspend_timeout; - unsigned int dma_rx_poll_rate; - int DTR_gpio; - int DTR_inverted; - int DTR_present; - - int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); - void (*enable_wakeup)(struct device *, bool); -}; - -#endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dfd8b7af8c7..f7a3ea2c498 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -11,6 +11,9 @@ * published by the Free Software Foundation. */ +#ifndef __PLAT_SAMSUNG_GPIO_CORE_H +#define __PLAT_SAMSUNG_GPIO_CORE_H + #define GPIOCON_OFF (0x00) #define GPIODAT_OFF (0x04) @@ -124,3 +127,5 @@ extern struct samsung_gpio_pm samsung_gpio_pm_4bit; /* locking wrappers to deal with multiple access to the same gpio bank */ #define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) #define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) + +#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */ |