summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/mmp2-brownstone.dts4
-rw-r--r--arch/arm/boot/dts/omap2.dtsi2
-rw-r--r--arch/arm/boot/dts/spear1310-evb.dts2
-rw-r--r--arch/arm/boot/dts/spear1310.dtsi2
-rw-r--r--arch/arm/boot/dts/spear1340-evb.dts2
-rw-r--r--arch/arm/boot/dts/spear1340.dtsi2
-rw-r--r--arch/arm/boot/dts/spear13xx.dtsi2
-rw-r--r--arch/arm/boot/dts/spear300-evb.dts2
-rw-r--r--arch/arm/boot/dts/spear300.dtsi2
-rw-r--r--arch/arm/boot/dts/spear310-evb.dts2
-rw-r--r--arch/arm/boot/dts/spear310.dtsi2
-rw-r--r--arch/arm/boot/dts/spear320-evb.dts2
-rw-r--r--arch/arm/boot/dts/spear320.dtsi2
-rw-r--r--arch/arm/boot/dts/spear3xx.dtsi2
-rw-r--r--arch/arm/include/asm/atomic.h2
-rw-r--r--arch/arm/include/asm/domain.h18
-rw-r--r--arch/arm/include/asm/futex.h1
-rw-r--r--arch/arm/include/asm/hardware/sp810.h2
-rw-r--r--arch/arm/include/asm/thread_info.h5
-rw-r--r--arch/arm/kernel/entry-armv.S1
-rw-r--r--arch/arm/kernel/kprobes-test-arm.c4
-rw-r--r--arch/arm/kernel/kprobes-thumb.c2
-rw-r--r--arch/arm/kernel/perf_event.c2
-rw-r--r--arch/arm/kernel/ptrace.c3
-rw-r--r--arch/arm/kernel/signal.c46
-rw-r--r--arch/arm/kernel/signal.h2
-rw-r--r--arch/arm/kernel/traps.c2
-rw-r--r--arch/arm/kernel/vmlinux.lds.S2
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h1
-rw-r--r--arch/arm/mach-exynos/Kconfig8
-rw-r--r--arch/arm/mach-highbank/Makefile6
-rw-r--r--arch/arm/mach-highbank/core.h1
-rw-r--r--arch/arm/mach-highbank/highbank.c14
-rw-r--r--arch/arm/mach-highbank/smc.S27
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/clk-imx1.c3
-rw-r--r--arch/arm/mach-imx/clk-imx21.c4
-rw-r--r--arch/arm/mach-imx/clk-imx25.c2
-rw-r--r--arch/arm/mach-imx/clk-imx27.c3
-rw-r--r--arch/arm/mach-imx/clk-imx31.c3
-rw-r--r--arch/arm/mach-imx/clk-imx35.c15
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c12
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c26
-rw-r--r--arch/arm/mach-imx/clk-pllv2.c93
-rw-r--r--arch/arm/mach-imx/crm-regs-imx5.h2
-rw-r--r--arch/arm/mach-imx/hotplug.c42
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx51sd.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c38
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c2
-rw-r--r--arch/arm/mach-imx/mm-imx3.c4
-rw-r--r--arch/arm/mach-imx/mm-imx5.c2
-rw-r--r--arch/arm/mach-kirkwood/board-iconnect.c3
-rw-r--r--arch/arm/mach-kirkwood/common.c9
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h1
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio-pxa.h29
-rw-r--r--arch/arm/mach-mmp/irq.c7
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h2
-rw-r--r--arch/arm/mach-mxs/mach-apx4devkit.c11
-rw-r--r--arch/arm/mach-omap2/board-flash.c5
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c6
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c28
-rw-r--r--arch/arm/mach-omap2/board-overo.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c6
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c10
-rw-r--r--arch/arm/mach-omap2/cm.h11
-rw-r--r--arch/arm/mach-omap2/cminst44xx.c4
-rw-r--r--arch/arm/mach-omap2/dsp.c3
-rw-r--r--arch/arm/mach-omap2/id.c11
-rw-r--r--arch/arm/mach-omap2/irq.c1
-rw-r--r--arch/arm/mach-omap2/mux.c4
-rw-r--r--arch/arm/mach-omap2/mux.h11
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c36
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.c3
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c6
-rw-r--r--arch/arm/mach-omap2/pm34xx.c1
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c14
-rw-r--r--arch/arm/mach-omap2/serial.c67
-rw-r--r--arch/arm/mach-omap2/twl-common.c2
-rw-r--r--arch/arm/mach-omap2/usb-musb.c6
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c2
-rw-r--r--arch/arm/mach-orion5x/include/mach/bridge-regs.h2
-rw-r--r--arch/arm/mach-orion5x/include/mach/io.h22
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h1
-rw-r--r--arch/arm/mach-pxa/hx4700.c15
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c1
-rw-r--r--arch/arm/mach-shmobile/board-kzm9d.c1
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c1
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c3
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c8
-rw-r--r--arch/arm/mach-shmobile/intc-r8a7779.c7
-rw-r--r--arch/arm/mach-shmobile/platsmp.c5
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/dma.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/generic.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/spear.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/timex.h2
-rw-r--r--arch/arm/mach-spear13xx/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-spear13xx/spear1310.c2
-rw-r--r--arch/arm/mach-spear13xx/spear1340.c2
-rw-r--r--arch/arm/mach-spear13xx/spear13xx.c2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/generic.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/misc_regs.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/timex.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-spear3xx/spear300.c2
-rw-r--r--arch/arm/mach-spear3xx/spear310.c2
-rw-r--r--arch/arm/mach-spear3xx/spear320.c2
-rw-r--r--arch/arm/mach-spear3xx/spear3xx.c2
-rw-r--r--arch/arm/mach-spear6xx/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-spear6xx/include/mach/misc_regs.h2
-rw-r--r--arch/arm/mach-tegra/reset.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c54
-rw-r--r--arch/arm/mach-versatile/core.c19
-rw-r--r--arch/arm/mach-versatile/include/mach/hardware.h3
-rw-r--r--arch/arm/mach-versatile/include/mach/io.h27
-rw-r--r--arch/arm/mach-versatile/pci.c19
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm/mm/mm.h2
-rw-r--r--arch/arm/mm/mmu.c74
-rw-r--r--arch/arm/net/bpf_jit_32.c5
-rw-r--r--arch/arm/net/bpf_jit_32.h4
-rw-r--r--arch/arm/plat-mxc/epit.c11
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/mx2_cam.h2
-rw-r--r--arch/arm/plat-mxc/time.c24
-rw-r--r--arch/arm/plat-omap/clock.c2
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h33
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h4
-rw-r--r--arch/arm/plat-orion/common.c2
-rw-r--r--arch/arm/plat-pxa/ssp.c1
-rw-r--r--arch/arm/plat-samsung/include/plat/map-s3c.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/watchdog-reset.h2
-rw-r--r--arch/arm/plat-spear/include/plat/debug-macro.S2
-rw-r--r--arch/arm/plat-spear/include/plat/pl080.h2
-rw-r--r--arch/arm/plat-spear/include/plat/shirq.h2
-rw-r--r--arch/arm/plat-spear/include/plat/timex.h2
-rw-r--r--arch/arm/plat-spear/include/plat/uncompress.h2
-rw-r--r--arch/arm/plat-spear/pl080.c2
-rw-r--r--arch/arm/plat-spear/restart.c2
-rw-r--r--arch/arm/plat-spear/shirq.c2
154 files changed, 763 insertions, 412 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e86fe20b7d0..8b0b743b4fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -293,6 +293,7 @@ config ARCH_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
@@ -588,6 +589,7 @@ config ARCH_ORION5X
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 153a4b2d12b..c9b4f27d191 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -11,7 +11,7 @@
/include/ "mmp2.dtsi"
/ {
- model = "Marvell MMP2 Aspenite Development Board";
+ model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
@@ -19,7 +19,7 @@
};
memory {
- reg = <0x00000000 0x04000000>;
+ reg = <0x00000000 0x08000000>;
};
soc {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea7cc0..581cb081cb0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8314e417188..dd4358bc26e 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9e61da404d5..419ea7413d2 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index 0d8472e5ab9..c9a54e06fb6 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index a26fc47a55e..d71fe2a68f0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 1f8e1e1481d..10dcec7e732 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index fc82b1a2645..d71b8d581e3 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 01c5e358fdb..ed3627c116c 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index dc5e2d445a9..b00544e0cd5 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e47081c494d..62fc4fb3e5f 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 6308fa3bec1..c13fd1f3b09 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 5372ca399b1..1f49d69595a 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 91072553963..3a8bb573692 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 68374ba6a94..c79f61faa3a 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -243,7 +243,7 @@ typedef struct {
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 3d2220498ab..6ddbe446425 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -60,13 +60,13 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
@@ -78,8 +78,8 @@
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 7be54690aee..e42cf597f6e 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -19,6 +19,7 @@
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index e0d1c0cfa54..6b9b077d86b 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -4,7 +4,7 @@
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b79f8e97f77..af7b0bda335 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
@@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 437f0c42651..0d1851ca6eb 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -495,6 +495,7 @@ ENDPROC(__und_usr)
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index ba32b393b3f..38c1a3b103a 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void)
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 8f96ec778e8..6123daf397a 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = {
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 186c8cb982c..a02eada3aa5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event)
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 5700a7ae7f0..14e38261cd3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,7 +25,6 @@
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
@@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index fd2392a17ac..536c5d6b340 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -27,6 +27,7 @@
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
@@ -47,6 +48,18 @@ const unsigned long sigreturn_codes[7] = {
};
/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
+/*
* atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
@@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
@@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall)
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 5ff067b7c75..6fcfe8398aa 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,5 +8,7 @@
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4928d89758f..3647170e9a1 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base)
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 43a31fb0631..36ff15bbfdd 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@ SECTIONS
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949dc4ac..f953bb54aa9 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d488c..d52b0ef313b 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 573be57d3d2..6f6d13f91e4 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -212,7 +212,7 @@ config MACH_SMDKV310
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
@@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -303,7 +303,7 @@ config MACH_NURI
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -341,7 +341,7 @@ config MACH_ORIGEN
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index f8437dd238c..ded4652ada8 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,8 @@
-obj-y := clock.o highbank.o system.o
+obj-y := clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index d8e2d0be64a..141ed517182 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void);
static inline void highbank_lluart_map_io(void) {}
#endif
+extern void highbank_smc1(int fn, int arg);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 410a112bb52..8777612b1a4 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = {
{}
};
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x0);
+}
+#endif
+
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Enable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+#endif
}
static void __init highbank_timer_init(void)
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
new file mode 100644
index 00000000000..407d17baaaa
--- /dev/null
+++ b/arch/arm/mach-highbank/smc.S
@@ -0,0 +1,27 @@
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+ stmfd sp!, {r4-r11, lr}
+ mov r12, r0
+ mov r0, r1
+ dsb
+ smc #0
+ ldmfd sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0021f726b15..eff4db5de0d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -477,6 +477,7 @@ config MACH_MX31_3DS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 0f0beb580b7..516ddee1948 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 4e4f384ee8d..ea13e61bd5f 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d9833bb5fd6..fdd8cc87c9f 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -243,6 +243,6 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 50a7ebd8d1b..295cbd7c08d 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a854b9cae5e..c9a06d800f8 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a9e60bf7dd7..c6422fb10ba 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@ int __init mx35_clocks_init()
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,14 +263,20 @@ int __init mx35_clocks_init()
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fcd94f3b0f0..a2200c77bf7 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
@@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index cab02d0a15d..e1a17ac7b3b 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@@ -156,16 +152,20 @@ enum mx6q_clks {
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom,
+ clk_max
};
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, rom,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -365,6 +365,7 @@ int __init mx6q_clocks_init(void)
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
@@ -424,21 +425,14 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
index 4685919deb6..0440379e362 100644
--- a/arch/arm/mach-imx/clk-pllv2.c
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -74,30 +74,15 @@ struct clk_pllv2 {
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
@@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
u32 reg;
- void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
@@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
@@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7daee..5e3f1f0f4ca 100644
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
@@ -23,7 +23,7 @@
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493abd497..20ed2d56c1a 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index c515f8ede1a..6450303f1a7 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ac50f1671e3..1e09de50cbc 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index dff82eb57cd..ba09552fe5f 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
@@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = {
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
@@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = {
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
@@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void)
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
@@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
@@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d14bbe949a4..3e7401fca76 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,7 +32,7 @@
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 967ed5b35a4..a8983b9778d 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
@@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void)
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
@@ -179,6 +181,8 @@ void __init imx31_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index feeee17da96..1d003053d56 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -202,6 +202,8 @@ void __init imx51_soc_init(void)
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ pinctrl_provide_dummies();
+
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 2222c573951..b0d3cc49269 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,9 +20,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 25fb3fd418e..f261cd24264 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
@@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
bit_idx, 0, &gating_lock, fn);
}
+static struct clk *ge0, *ge1;
+
void __init kirkwood_clk_init(void)
{
- struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
@@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
}
@@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
+ clk_prepare_enable(ge1);
}
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 3eee37a3b50..a115142f869 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,6 +38,7 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index fede3d503ef..c5b68510776 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,6 +80,7 @@
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a599f3..00000000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
index fcfe0e3bd70..e60c7d98922 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq.c
@@ -241,6 +241,7 @@ void __init mmp2_init_icu(void)
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
+ icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
@@ -249,6 +250,7 @@ void __init mmp2_init_icu(void)
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
+ icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
@@ -257,6 +259,7 @@ void __init mmp2_init_icu(void)
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
+ icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
@@ -265,6 +268,7 @@ void __init mmp2_init_icu(void)
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
+ icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
@@ -273,6 +277,7 @@ void __init mmp2_init_icu(void)
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
+ icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
@@ -281,6 +286,7 @@ void __init mmp2_init_icu(void)
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
+ icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
@@ -289,6 +295,7 @@ void __init mmp2_init_icu(void)
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
+ icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb96dba..eb187e0e059 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497162e..e807c4c52a0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9dcdef..f5f061757de 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy)
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
@@ -225,6 +235,7 @@ static void __init apx4devkit_init(void)
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70a81f900bb..53c39d239d6 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
gpmc_onenand_init(&board_onenand_data);
}
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8ca14e88a31..2c5d0ed7528 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909eeb7..580fd17208d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@ static u8 omap3_beagle_version;
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
@@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void)
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
@@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
@@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
@@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void)
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3a4c3..779734d8ba3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@ static void __init overo_init(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ff53decceca..df2534de336 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
- .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
@@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
- .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
@@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void)
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+ rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+ rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 4e1a3b0e8cc..1efdec236ae 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void)
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f660384..ba6f9a0a43e 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,6 +84,7 @@ static struct clk slimbus_clk = {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
@@ -512,6 +513,7 @@ static struct clk ddrphy_ck = {
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
@@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = {
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = {
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
@@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = {
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
@@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void)
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
- } else if (cpu_is_omap446x()) {
+ } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
+
+ if (cpu_is_omap447x())
+ pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a7bc096bd40..f24e3f7a2bb 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -22,4 +22,15 @@
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 8c86d294b1a..1a39945d9ff 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 845309f146f..88ffa1e645c 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -20,6 +20,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0389b3264ab..00486a8564f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void)
omap_features |= OMAP3_HAS_SDRC;
/*
+ * am35x fixups:
+ * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+ * reserved and therefore return 0 when read. Unfortunately,
+ * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+ * mean that a feature is present even though it isn't so clear
+ * the incorrectly set feature bits.
+ */
+ if (soc_is_am35xx())
+ omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
+ /*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
*/
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 428685f6506..d5b34febd82 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 80e55c5c999..9fe6829f4c1 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -41,6 +41,7 @@
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
@@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 69fe060a0b7..471e62a74a1 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -59,6 +59,7 @@
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
@@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux);
#else
+static inline int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bf86f7e8f91..773193670ea 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 950454a3fa3..b7bcba5221b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
@@ -1924,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1959,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1994,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2029,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3860,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
@@ -3918,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
@@ -4009,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -4027,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -5853,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = {
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
@@ -6010,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -6025,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
@@ -6132,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index a05a62f9ee5..acc216491b8 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
- WARN(true, "%s seen by %s %s at address %x\n",
+ pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
+ WARN_ON(1);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477e6f8..d52651a05da 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode)
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a34023d0ca7..3a595e89972 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -724,6 +724,7 @@ int __init omap3_pm_init(void)
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
+ enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9ce765407ad..21cb74003a5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
@@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
static int __init omap3xxx_prcm_init(void)
{
- if (cpu_is_omap34xx())
- return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- return 0;
+ int ret = 0;
+
+ if (cpu_is_omap34xx()) {
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+ }
+
+ return ret;
}
subsys_initcall(omap3xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 292d4aaca06..c1b93c752d7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -57,6 +57,7 @@ struct omap_uart_state {
struct list_head node;
struct omap_hwmod *oh;
+ struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
@@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+ tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+ uart->default_omap_uart_pads[0].name = rx_pad_name;
+ uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+ OMAP_DEVICE_PAD_WAKEUP;
+ uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+ OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[1].name = tx_pad_name;
+ uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+ OMAP_MUX_MODE0;
+ bdata->pads = uart->default_omap_uart_pads;
+ bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
{
+ struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+ struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+ char *rx_fmt, *tx_fmt;
+ int uart_nr = bdata->id + 1;
+
+ if (bdata->id != 2) {
+ rx_fmt = "uart%d_rx.uart%d_rx";
+ tx_fmt = "uart%d_tx.uart%d_tx";
+ } else {
+ rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+ tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+ }
+
+ snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+ uart_nr, uart_nr);
+ snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+ uart_nr, uart_nr);
+
+ if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+ omap_mux_get_by_name
+ (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+ u16 tx_mode, rx_mode;
+
+ tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+ rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+ /*
+ * Check if uart is used in default tx/rx mode i.e. in mux mode0
+ * if yes then configure rx pin for wake up capability
+ */
+ if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+ omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+ }
}
#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+}
#endif
static char *cmdline_find_option(char *str)
@@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info)
bdata.pads = NULL;
bdata.pads_cnt = 0;
- if (cpu_is_omap44xx() || cpu_is_omap34xx())
- omap_serial_fill_default_pads(&bdata);
+ omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a910f3..43a97907533 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b19d1b43c12..c4a57685666 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index db84a46ce7f..805bea6edf1 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 96484bcd34c..11a3c1e9801 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -35,5 +35,5 @@
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 00000000000..1aa5d0a50a0
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2745f5d95b3..683e085ce16 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -82,6 +82,7 @@
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a746b..d3de84b0dcb 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
@@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
@@ -872,14 +880,19 @@ static struct gpio global_gpios[] = {
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9e37026ef9d..9bd135531d7 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 7bc5e7d39f9..6a33cf39342 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index d8e33b68283..c0ae815e7be 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index b577f7c4467..150122a4463 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1512,6 +1512,9 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* SDHI0 PORT172 card-detect IRQ26 */
+ gpio_request(GPIO_FN_IRQ26_172, NULL);
+
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 472d1f5361e..3946c4ba2aa 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = {
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219,
+ MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+ MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
@@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index 550b23df4fd..f04fad4ec4f 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -35,6 +35,9 @@
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
@@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void)
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ /* route all interrupts to ARM */
+ __raw_writel(0xffffffff, INT2NTSR0);
+ __raw_writel(0x3fffffff, INT2NTSR1);
+
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index bacdd667e3b..e859fcdb3d5 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -25,7 +25,12 @@
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
#define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 6a4bd582c02..fafce9ce821 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
},
};
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
index ea1564609bd..9e3ae6bfe50 100644
--- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
index 383ab04dc6c..d50bdb60592 100644
--- a/arch/arm/mach-spear13xx/include/mach/dma.h
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -4,7 +4,7 @@
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index 6d8c45b9f29..dac57fd0cdf 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -4,7 +4,7 @@
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
index cd6f4f86a56..85f176311f6 100644
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
index f542a24aa5f..271a62b4cd3 100644
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 30c57ef7268..65f27def239 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -4,7 +4,7 @@
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
index 31af3e8d976..3a58b8284a6 100644
--- a/arch/arm/mach-spear13xx/include/mach/timex.h
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
index c7840896ae6..70fe72f05de 100644
--- a/arch/arm/mach-spear13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index fefd15b2f38..732d29bc733 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -4,7 +4,7 @@
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index ee38cbc5686..81e4ed76ad0 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -4,7 +4,7 @@
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 50b349ae863..cf936b106e2 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -4,7 +4,7 @@
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
index 590519f10d6..0a6381fad5d 100644
--- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 4a95b9453c2..ce19113ca79 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
index 451b2081bfc..2ac74c6db7f 100644
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 51bd62a0254..803de76f5f3 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 18e2ac576f2..6309bf68d6f 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 51eb953148a..8cca95193d4 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -4,7 +4,7 @@
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
index a38cc9de876..9f5d08bd0c4 100644
--- a/arch/arm/mach-spear3xx/include/mach/timex.h
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -4,7 +4,7 @@
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
index 53ba8bbc0df..b909b011f7c 100644
--- a/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f74a05bdb82..0f882ecb7d8 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -4,7 +4,7 @@
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 84dfb090074..bbcf4571d36 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -4,7 +4,7 @@
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index a88fa841d29..88d483bcd66 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -4,7 +4,7 @@
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f22419ed74a..0f41bd1c47c 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -4,7 +4,7 @@
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
index 3a789dbb69f..d42cefc0356 100644
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 179e45774b3..c34acc201d3 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 4d6a2ee99c3..5beb7ebe294 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -33,7 +33,7 @@
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9c74ac54584..1509a3cb583 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -580,43 +580,12 @@ static void ux500_uart0_reset(void)
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
@@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = {
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cf4687ee2a7..cd8ea3588f9 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = {
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- },
-#if 0
- {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = SZ_16M,
- .type = MT_DEVICE
}, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
- .length = SZ_16M,
+ .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
-#endif
};
void __init versatile_map_io(void)
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4d4973dd8fb..408e58da46c 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,8 +29,9 @@
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 00000000000..0406513be7d
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE 0xeb000000ul
+
+#define __io(a) ((a) + PCIO_BASE)
+
+#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 15c6a00000e..e95bf84cc83 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = {
.write = versatile_write_config,
};
+static struct resource io_port = {
+ .name = "PCI",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
@@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
"memory region (%d)\n", ret);
goto out;
}
+ ret = request_resource(&ioport_resource, &io_port);
+ if (ret) {
+ printk(KERN_ERR "PCI: unable to allocate I/O "
+ "port region (%d)\n", ret);
+ goto out;
+ }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
@@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
if (nr == 0) {
sys->mem_offset = 0;
+ sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
@@ -325,7 +339,6 @@ void __init pci_versatile_preinit(void)
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index d766e4256b7..4044abcf6f9 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t
return NULL;
while (count) {
- int j, order = __ffs(count);
+ int j, order = __fls(count);
pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
while (!pages[i] && order)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c471436c795..2e8a1efdf7b 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -64,7 +64,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
#ifdef CONFIG_ZONE_DMA
extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e5dad60b558..cf4528d5177 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -791,6 +791,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
@@ -1072,6 +1145,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 62135849f48..c641fb68501 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -762,6 +762,11 @@ b_epilogue:
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index 99ae5e3f46d..7fa2f7d3cb9 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -68,6 +68,8 @@
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
@@ -132,6 +134,8 @@
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index 9129c9e7d53..88726f4dbbf 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -50,6 +50,7 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
@@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
return 0;
}
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cf663d84e7c..e429ca1b814 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -54,8 +54,8 @@ extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 7ded6f1f74b..3c080a32dbf 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,6 +23,7 @@
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
+#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
@@ -30,6 +31,7 @@
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 99f958ca6cb..00e8e659e66 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -58,6 +58,7 @@
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
@@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_clk;
struct clk *timer_ipg_clk;
- if (!timer_clk) {
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
}
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
clk_prepare_enable(timer_clk);
timer_base = base;
@@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c45279..706b7e29397 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
@@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 297245dba66..de6c0a08f46 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335)
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
@@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
@@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
@@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
@@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
@@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a7754a886d4..5493bd95da5 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -172,8 +172,7 @@ struct omap_mmc_platform_data {
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
@@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 61fd837624a..c1793786aea 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase)
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 58b79809d20..584c9bf8ed2 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = {
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index 7d048759b77..c0c70a895ca 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -22,7 +22,7 @@
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index f19aff19205..bc4db9b04e3 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void)
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- if (s3c2410_wdtclk)
+ if (!IS_ERR(s3c2410_wdtclk))
clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index ab3de721c5d..75b05ad0fba 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -4,7 +4,7 @@
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
index e14a3e4932f..2bc6b54460a 100644
--- a/arch/arm/plat-spear/include/plat/pl080.h
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
index 03ed8b585dc..88a7fbd2479 100644
--- a/arch/arm/plat-spear/include/plat/shirq.h
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -4,7 +4,7 @@
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
index 914d09dd50f..ef95e5b780b 100644
--- a/arch/arm/plat-spear/include/plat/timex.h
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -4,7 +4,7 @@
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 6dd455bafdf..2ce6cb17a98 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
index a56a067717c..12cf27f935f 100644
--- a/arch/arm/plat-spear/pl080.c
+++ b/arch/arm/plat-spear/pl080.c
@@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index ea0a61302b7..4f990115b1b 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -4,7 +4,7 @@
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
index 961fb726124..853e891e118 100644
--- a/arch/arm/plat-spear/shirq.c
+++ b/arch/arm/plat-spear/shirq.c
@@ -4,7 +4,7 @@
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any