diff options
Diffstat (limited to 'arch/arm')
486 files changed, 3598 insertions, 15183 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2f88d8d9770..6d4d4385848 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -279,7 +279,6 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -312,7 +311,6 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB - select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD @@ -407,21 +405,19 @@ config ARCH_GEMINI help Support for the Cortina Systems Gemini family SoCs -config ARCH_PRIMA2 - bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - select CPU_V7 +config ARCH_SIRF + bool "CSR SiRF" select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_SIRF select USE_OF - select ZONE_DMA help - Support for CSR SiRFSoC ARM Cortex A9 Platform + Support for CSR SiRFprimaII/Marco/Polo platforms config ARCH_EBSA110 bool "EBSA-110" @@ -456,7 +452,7 @@ config ARCH_FOOTBRIDGE select FOOTBRIDGE select GENERIC_CLOCKEVENTS select HAVE_IDE - select NEED_MACH_IO_H + select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -513,7 +509,6 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NEED_RET_TO_USER help @@ -523,7 +518,6 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -536,7 +530,6 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -576,7 +569,6 @@ config ARCH_DOVE select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the Marvell Dove SoC 88AP510 @@ -587,7 +579,6 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Kirkwood series SoCs: @@ -614,7 +605,6 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell MV78xx0 series SoCs: @@ -627,7 +617,6 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: @@ -652,8 +641,9 @@ config ARCH_KS8695 bool "Micrel/Kendin KS8695" select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -683,7 +673,6 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ select USE_OF help @@ -709,14 +698,6 @@ config ARCH_PICOXCELL family of Femtocell devices. The picoxcell support requires device tree for all boards. -config ARCH_PNX4008 - bool "Philips Nexperia PNX4008 Mobile" - select CPU_ARM926T - select CLKDEV_LOOKUP - select ARCH_USES_GETTIMEOFFSET - help - This enables support for Philips PNX4008 mobile platform. - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -912,7 +893,6 @@ config ARCH_SHARK select PCI select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H - select NEED_MACH_IO_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -931,6 +911,7 @@ config ARCH_U300 select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. @@ -1118,6 +1099,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-prima2/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" @@ -1179,12 +1162,6 @@ config XSCALE_PMU depends on CPU_XSCALE default y -config CPU_HAS_PMU - depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ - (!ARCH_OMAP3 || OMAP3_EMU) - default y - bool - config MULTI_IRQ_HANDLER bool help @@ -1757,7 +1734,7 @@ config HIGHPTE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && CPU_HAS_PMU + depends on PERF_EVENTS default y help Enable hardware performance counter support for perf events. If diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a051dfbdd7d..74381a31ee4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -167,7 +167,6 @@ machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell -machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 2b0ff60247a..2acc86cfdd0 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -49,7 +49,7 @@ i2c@1001d000 { clock-frequency = <400000>; status = "okay"; - at24@4c { + at24@52 { compatible = "at,24c32"; pagesize = <32>; reg = <0x52>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index f146dbf6f7f..c3ef1ad26b6 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -275,6 +275,160 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; pmc { @@ -310,6 +464,72 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; + /* Hack until board-harmony-pcie.c is removed */ + status = "disabled"; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-harmony", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig deleted file mode 100644 index 35a31ccacc3..00000000000 --- a/arch/arm/configs/pnx4008_defconfig +++ /dev/null @@ -1,472 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_ARCH_PNX4008=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -CONFIG_IP_VS=m -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m -CONFIG_IP_VS_FTP=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_DECNET_NF_GRABULATOR=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_IP_SCTP=m -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_LLC2=m -CONFIG_IPX=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_ECONET=m -CONFIG_ECONET_AUNUDP=y -CONFIG_ECONET_NATIVE=y -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_DOC2000=m -CONFIG_MTD_DOC2001=m -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_CDROM_PKTCDVD=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_DEBUG=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_WAN=y -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_DLCI=m -CONFIG_WAN_ROUTER_DRIVERS=m -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_ATM_TCP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_USBPCWATCHDOG=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SOUND_PRIME=m -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_TEST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DUMMY_HCD=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_ACORN_PARTITION=y -CONFIG_ACORN_PARTITION_ICS=y -CONFIG_ACORN_PARTITION_RISCIX=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index c328ac65479..807d4e2acb1 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -1,4 +1,6 @@ CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y @@ -8,9 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_PRIMA2=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_SIRF=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_KEXEC=y @@ -36,7 +36,6 @@ CONFIG_SPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index db2245353f0..0d6bb738c6d 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -145,6 +145,8 @@ CONFIG_MMC_SDHCI_TEGRA=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_DMADEVICES=y +CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 2ff2c75a463..02fe2fbe247 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -217,18 +217,8 @@ extern int iop3xx_get_init_atu(void); #define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 #define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 -#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ - IOP3XX_PCI_LOWER_IO_PA) +\ - IOP3XX_PCI_LOWER_IO_VA) - +#define IOP3XX_PCI_LOWER_IO_BA 0x00000000 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 815c669fec0..8f4db67533e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -113,11 +113,19 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #define __iowmb() do { } while (0) #endif +/* PCI fixed i/o mapping */ +#define PCI_IO_VIRT_BASE 0xfee00000 + +extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); + /* * Now, pick up the machine-defined IO definitions */ #ifdef CONFIG_NEED_MACH_IO_H #include <mach/io.h> +#elif defined(CONFIG_PCI) +#define IO_SPACE_LIMIT ((resource_size_t)0xfffff) +#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT)) #else #define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index a6efcdd6fd2..195ac2f9d3d 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -9,6 +9,9 @@ * * Page table mapping constructs and function prototypes */ +#ifndef __ASM_MACH_MAP_H +#define __ASM_MACH_MAP_H + #include <asm/io.h> struct map_desc { @@ -34,6 +37,8 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); +extern void vm_reserve_area_early(unsigned long addr, unsigned long size, + void *caller); struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); @@ -44,4 +49,7 @@ extern int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) +#define vm_reserve_area_early(a,s,c) do { } while (0) +#endif + #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 26c511fddf8..db9fedb57f2 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -11,6 +11,8 @@ #ifndef __ASM_MACH_PCI_H #define __ASM_MACH_PCI_H +#include <linux/ioport.h> + struct pci_sys_data; struct pci_ops; struct pci_bus; @@ -42,6 +44,8 @@ struct pci_sys_data { unsigned long io_offset; /* bus->cpu IO mapping offset */ struct pci_bus *bus; /* PCI bus */ struct list_head resources; /* root bus resources (apertures) */ + struct resource io_res; + char io_res_name[12]; /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ @@ -55,6 +59,15 @@ struct pci_sys_data { void pci_common_init(struct hw_pci *); /* + * Setup early fixed I/O mapping. + */ +#if defined(CONFIG_PCI) +extern void pci_map_io_early(unsigned long pfn); +#else +static inline void pci_map_io_early(unsigned long pfn) {} +#endif + +/* * PCI controllers */ extern struct pci_ops iop3xx_ops; diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index e074948d814..625cd621a43 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,6 +12,13 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* Nothing to see here... */ +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 4432305f4a2..a26170dce02 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -16,69 +16,30 @@ #include <linux/perf_event.h> /* - * Types of PMUs that can be accessed directly and require mutual - * exclusion between profiling tools. - */ -enum arm_pmu_type { - ARM_PMU_DEVICE_CPU = 0, - ARM_NUM_PMU_DEVICES, -}; - -/* * struct arm_pmu_platdata - ARM PMU platform data * * @handle_irq: an optional handler which will be called from the * interrupt and passed the address of the low level handler, * and can be used to implement any platform specific handling * before or after calling it. - * @enable_irq: an optional handler which will be called after - * request_irq and be used to handle some platform specific - * irq enablement - * @disable_irq: an optional handler which will be called before - * free_irq and be used to handle some platform specific - * irq disablement + * @runtime_resume: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_get(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called once. + * @runtime_suspend: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_put(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called following the + * final call to pm_runtime_put() that actually disables the + * hardware. */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); - void (*enable_irq)(int irq); - void (*disable_irq)(int irq); + int (*runtime_resume)(struct device *dev); + int (*runtime_suspend)(struct device *dev); }; -#ifdef CONFIG_CPU_HAS_PMU - -/** - * reserve_pmu() - reserve the hardware performance counters - * - * Reserve the hardware performance counters in the system for exclusive use. - * Returns 0 on success or -EBUSY if the lock is already held. - */ -extern int -reserve_pmu(enum arm_pmu_type type); - -/** - * release_pmu() - Relinquish control of the performance counters - * - * Release the performance counters and allow someone else to use them. - */ -extern void -release_pmu(enum arm_pmu_type type); - -#else /* CONFIG_CPU_HAS_PMU */ - -#include <linux/err.h> - -static inline int -reserve_pmu(enum arm_pmu_type type) -{ - return -ENODEV; -} - -static inline void -release_pmu(enum arm_pmu_type type) { } - -#endif /* CONFIG_CPU_HAS_PMU */ - #ifdef CONFIG_HW_PERF_EVENTS /* The events for a given PMU register set. */ @@ -103,7 +64,6 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; - enum arm_pmu_type type; cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); @@ -118,6 +78,8 @@ struct arm_pmu { void (*start)(void); void (*stop)(void); void (*reset)(void *); + int (*request_irq)(irq_handler_t handler); + void (*free_irq)(void); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -129,7 +91,9 @@ struct arm_pmu { #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); +extern const struct dev_pm_ops armpmu_dev_pm_ops; + +int armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, @@ -139,6 +103,13 @@ int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx); +int armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask); + #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7ad2d5cf700..1c432143073 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -69,8 +69,7 @@ obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o -obj-$(CONFIG_CPU_HAS_PMU) += pmu.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 2b2f25e7fef..b244696de1a 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/pci.h> static int debug_pci; @@ -423,6 +424,38 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } +static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys) +{ + int ret; + struct pci_host_bridge_window *window; + + if (list_empty(&sys->resources)) { + pci_add_resource_offset(&sys->resources, + &iomem_resource, sys->mem_offset); + } + + list_for_each_entry(window, &sys->resources, list) { + if (resource_type(window->res) == IORESOURCE_IO) + return 0; + } + + sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io; + sys->io_res.end = (busnr + 1) * SZ_64K - 1; + sys->io_res.flags = IORESOURCE_IO; + sys->io_res.name = sys->io_res_name; + sprintf(sys->io_res_name, "PCI%d I/O", busnr); + + ret = request_resource(&ioport_resource, &sys->io_res); + if (ret) { + pr_err("PCI: unable to allocate I/O port region (%d)\n", ret); + return ret; + } + pci_add_resource_offset(&sys->resources, &sys->io_res, + sys->io_offset); + + return 0; +} + static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) { struct pci_sys_data *sys = NULL; @@ -445,11 +478,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) ret = hw->setup(nr, sys); if (ret > 0) { - if (list_empty(&sys->resources)) { - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &iomem_resource, sys->mem_offset); + ret = pcibios_init_resources(nr, sys); + if (ret) { + kfree(sys); + break; } if (hw->scan) @@ -627,3 +659,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } + +void __init pci_map_io_early(unsigned long pfn) +{ + struct map_desc pci_io_desc = { + .virtual = PCI_IO_VIRT_BASE, + .type = MT_DEVICE, + .length = SZ_64K, + }; + + pci_io_desc.pfn = pfn; + iotable_init(&pci_io_desc, 1); +} diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index ab243b87118..93971b1a4f0 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -12,68 +12,15 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt -#include <linux/bitmap.h> -#include <linux/interrupt.h> #include <linux/kernel.h> -#include <linux/export.h> -#include <linux/perf_event.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> +#include <linux/pm_runtime.h> #include <linux/uaccess.h> -#include <asm/cputype.h> -#include <asm/irq.h> #include <asm/irq_regs.h> #include <asm/pmu.h> #include <asm/stacktrace.h> -/* - * ARMv6 supports a maximum of 3 events, starting from index 0. If we add - * another platform that supports more, we need to increase this to be the - * largest of all platforms. - * - * ARMv7 supports up to 32 events: - * cycle counter CCNT + 31 events counters CNT0..30. - * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); -static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); -static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); - -#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) - -/* Set at runtime when we know what CPU type we are. */ -static struct arm_pmu *cpu_pmu; - -const char *perf_pmu_name(void) -{ - if (!cpu_pmu) - return NULL; - - return cpu_pmu->pmu.name; -} -EXPORT_SYMBOL_GPL(perf_pmu_name); - -int perf_num_counters(void) -{ - int max_events = 0; - - if (cpu_pmu != NULL) - max_events = cpu_pmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -#define HW_OP_UNSUPPORTED 0xFFFF - -#define C(_x) \ - PERF_COUNT_HW_CACHE_##_x - -#define CACHE_OP_UNSUPPORTED 0xFFFF - static int armpmu_map_cache_event(const unsigned (*cache_map) [PERF_COUNT_HW_CACHE_MAX] @@ -104,7 +51,7 @@ armpmu_map_cache_event(const unsigned (*cache_map) } static int -armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) +armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { int mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; @@ -116,19 +63,20 @@ armpmu_map_raw_event(u32 raw_event_mask, u64 config) return (int)(config & raw_event_mask); } -static int map_cpu_event(struct perf_event *event, - const unsigned (*event_map)[PERF_COUNT_HW_MAX], - const unsigned (*cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u32 raw_event_mask) +int +armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) { u64 config = event->attr.config; switch (event->attr.type) { case PERF_TYPE_HARDWARE: - return armpmu_map_event(event_map, config); + return armpmu_map_hw_event(event_map, config); case PERF_TYPE_HW_CACHE: return armpmu_map_cache_event(cache_map, config); case PERF_TYPE_RAW: @@ -222,7 +170,6 @@ armpmu_stop(struct perf_event *event, int flags) */ if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); - barrier(); /* why? */ armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } @@ -350,99 +297,41 @@ validate_group(struct perf_event *event) return 0; } -static irqreturn_t armpmu_platform_irq(int irq, void *dev) +static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) { struct arm_pmu *armpmu = (struct arm_pmu *) dev; struct platform_device *plat_device = armpmu->plat_device; struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev); - return plat->handle_irq(irq, dev, armpmu->handle_irq); + if (plat && plat->handle_irq) + return plat->handle_irq(irq, dev, armpmu->handle_irq); + else + return armpmu->handle_irq(irq, dev); } static void armpmu_release_hardware(struct arm_pmu *armpmu) { - int i, irq, irqs; - struct platform_device *pmu_device = armpmu->plat_device; - struct arm_pmu_platdata *plat = - dev_get_platdata(&pmu_device->dev); - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - - for (i = 0; i < irqs; ++i) { - if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) - continue; - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) { - if (plat && plat->disable_irq) - plat->disable_irq(irq); - free_irq(irq, armpmu); - } - } - - release_pmu(armpmu->type); + armpmu->free_irq(); + pm_runtime_put_sync(&armpmu->plat_device->dev); } static int armpmu_reserve_hardware(struct arm_pmu *armpmu) { - struct arm_pmu_platdata *plat; - irq_handler_t handle_irq; - int i, err, irq, irqs; + int err; struct platform_device *pmu_device = armpmu->plat_device; if (!pmu_device) return -ENODEV; - err = reserve_pmu(armpmu->type); + pm_runtime_get_sync(&pmu_device->dev); + err = armpmu->request_irq(armpmu_dispatch_irq); if (err) { - pr_warning("unable to reserve pmu\n"); + armpmu_release_hardware(armpmu); return err; } - plat = dev_get_platdata(&pmu_device->dev); - if (plat && plat->handle_irq) - handle_irq = armpmu_platform_irq; - else - handle_irq = armpmu->handle_irq; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - if (irqs < 1) { - pr_err("no irqs for PMUs defined\n"); - return -ENODEV; - } - - for (i = 0; i < irqs; ++i) { - err = 0; - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - /* - * If we have a single PMU interrupt that we can't shift, - * assume that we're running on a uniprocessor machine and - * continue. Otherwise, continue without this interrupt. - */ - if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); - continue; - } - - err = request_irq(irq, handle_irq, - IRQF_DISABLED | IRQF_NOBALANCING, - "arm-pmu", armpmu); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - armpmu_release_hardware(armpmu); - return err; - } else if (plat && plat->enable_irq) - plat->enable_irq(irq); - - cpumask_set_cpu(i, &armpmu->active_irqs); - } - return 0; } @@ -581,6 +470,32 @@ static void armpmu_disable(struct pmu *pmu) armpmu->stop(); } +#ifdef CONFIG_PM_RUNTIME +static int armpmu_runtime_resume(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_resume) + return plat->runtime_resume(dev); + + return 0; +} + +static int armpmu_runtime_suspend(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_suspend) + return plat->runtime_suspend(dev); + + return 0; +} +#endif + +const struct dev_pm_ops armpmu_dev_pm_ops = { + SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL) +}; + static void __init armpmu_init(struct arm_pmu *armpmu) { atomic_set(&armpmu->active_events, 0); @@ -598,174 +513,14 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, char *name, int type) { armpmu_init(armpmu); + pr_info("enabled with %s PMU driver, %d counters available\n", + armpmu->name, armpmu->num_events); return perf_pmu_register(&armpmu->pmu, name, type); } -/* Include the PMU-specific implementations. */ -#include "perf_event_xscale.c" -#include "perf_event_v6.c" -#include "perf_event_v7.c" - -/* - * Ensure the PMU has sane values out of reset. - * This requires SMP to be available, so exists as a separate initcall. - */ -static int __init -cpu_pmu_reset(void) -{ - if (cpu_pmu && cpu_pmu->reset) - return on_each_cpu(cpu_pmu->reset, NULL, 1); - return 0; -} -arch_initcall(cpu_pmu_reset); - -/* - * PMU platform driver and devicetree bindings. - */ -static struct of_device_id armpmu_of_device_ids[] = { - {.compatible = "arm,cortex-a9-pmu"}, - {.compatible = "arm,cortex-a8-pmu"}, - {.compatible = "arm,arm1136-pmu"}, - {.compatible = "arm,arm1176-pmu"}, - {}, -}; - -static struct platform_device_id armpmu_plat_device_ids[] = { - {.name = "arm-pmu"}, - {}, -}; - -static int __devinit armpmu_device_probe(struct platform_device *pdev) -{ - if (!cpu_pmu) - return -ENODEV; - - cpu_pmu->plat_device = pdev; - return 0; -} - -static struct platform_driver armpmu_driver = { - .driver = { - .name = "arm-pmu", - .of_match_table = armpmu_of_device_ids, - }, - .probe = armpmu_device_probe, - .id_table = armpmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&armpmu_driver); -} -device_initcall(register_pmu_driver); - -static struct pmu_hw_events *armpmu_get_cpu_events(void) -{ - return &__get_cpu_var(cpu_hw_events); -} - -static void __init cpu_pmu_init(struct arm_pmu *armpmu) -{ - int cpu; - for_each_possible_cpu(cpu) { - struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); - events->events = per_cpu(hw_events, cpu); - events->used_mask = per_cpu(used_mask, cpu); - raw_spin_lock_init(&events->pmu_lock); - } - armpmu->get_hw_events = armpmu_get_cpu_events; - armpmu->type = ARM_PMU_DEVICE_CPU; -} - -/* - * PMU hardware loses all context when a CPU goes offline. - * When a CPU is hotplugged back in, since some hardware registers are - * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading - * junk values out of them. - */ -static int __cpuinit pmu_cpu_notify(struct notifier_block *b, - unsigned long action, void *hcpu) -{ - if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) - return NOTIFY_DONE; - - if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); - - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata pmu_cpu_notifier = { - .notifier_call = pmu_cpu_notify, -}; - -/* - * CPU PMU identification and registration. - */ -static int __init -init_hw_perf_events(void) -{ - unsigned long cpuid = read_cpuid_id(); - unsigned long implementor = (cpuid & 0xFF000000) >> 24; - unsigned long part_number = (cpuid & 0xFFF0); - - /* ARM Ltd CPUs. */ - if (0x41 == implementor) { - switch (part_number) { - case 0xB360: /* ARM1136 */ - case 0xB560: /* ARM1156 */ - case 0xB760: /* ARM1176 */ - cpu_pmu = armv6pmu_init(); - break; - case 0xB020: /* ARM11mpcore */ - cpu_pmu = armv6mpcore_pmu_init(); - break; - case 0xC080: /* Cortex-A8 */ - cpu_pmu = armv7_a8_pmu_init(); - break; - case 0xC090: /* Cortex-A9 */ - cpu_pmu = armv7_a9_pmu_init(); - break; - case 0xC050: /* Cortex-A5 */ - cpu_pmu = armv7_a5_pmu_init(); - break; - case 0xC0F0: /* Cortex-A15 */ - cpu_pmu = armv7_a15_pmu_init(); - break; - case 0xC070: /* Cortex-A7 */ - cpu_pmu = armv7_a7_pmu_init(); - break; - } - /* Intel CPUs [xscale]. */ - } else if (0x69 == implementor) { - part_number = (cpuid >> 13) & 0x7; - switch (part_number) { - case 1: - cpu_pmu = xscale1pmu_init(); - break; - case 2: - cpu_pmu = xscale2pmu_init(); - break; - } - } - - if (cpu_pmu) { - pr_info("enabled with %s PMU driver, %d counters available\n", - cpu_pmu->name, cpu_pmu->num_events); - cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&pmu_cpu_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); - } else { - pr_info("no hardware support available\n"); - } - - return 0; -} -early_initcall(init_hw_perf_events); - /* * Callchain handling code. */ diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c new file mode 100644 index 00000000000..8d7d8d4de9d --- /dev/null +++ b/arch/arm/kernel/perf_event_cpu.c @@ -0,0 +1,295 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ +#define pr_fmt(fmt) "CPU PMU: " fmt + +#include <linux/bitmap.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#include <asm/cputype.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> + +/* Set at runtime when we know what CPU type we are. */ +static struct arm_pmu *cpu_pmu; + +static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); +static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); +static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); + +/* + * Despite the names, these two functions are CPU-specific and are used + * by the OProfile/perf code. + */ +const char *perf_pmu_name(void) +{ + if (!cpu_pmu) + return NULL; + + return cpu_pmu->pmu.name; +} +EXPORT_SYMBOL_GPL(perf_pmu_name); + +int perf_num_counters(void) +{ + int max_events = 0; + + if (cpu_pmu != NULL) + max_events = cpu_pmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" + +static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) +{ + return &__get_cpu_var(cpu_hw_events); +} + +static void cpu_pmu_free_irq(void) +{ + int i, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + for (i = 0; i < irqs; ++i) { + if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, cpu_pmu); + } +} + +static int cpu_pmu_request_irq(irq_handler_t handler) +{ + int i, err, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + if (!pmu_device) + return -ENODEV; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { + pr_err("no irqs for PMUs defined\n"); + return -ENODEV; + } + + for (i = 0; i < irqs; ++i) { + err = 0; + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); + continue; + } + + err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu", + cpu_pmu); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + + cpumask_set_cpu(i, &cpu_pmu->active_irqs); + } + + return 0; +} + +static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) +{ + int cpu; + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); + events->events = per_cpu(hw_events, cpu); + events->used_mask = per_cpu(used_mask, cpu); + raw_spin_lock_init(&events->pmu_lock); + } + + cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events; + cpu_pmu->request_irq = cpu_pmu_request_irq; + cpu_pmu->free_irq = cpu_pmu_free_irq; + + /* Ensure the PMU has sane values out of reset. */ + if (cpu_pmu && cpu_pmu->reset) + on_each_cpu(cpu_pmu->reset, NULL, 1); +} + +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit cpu_pmu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { + .notifier_call = cpu_pmu_notify, +}; + +/* + * PMU platform driver and devicetree bindings. + */ +static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, + {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, + {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, + {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, + {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, + {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init}, + {}, +}; + +static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { + {.name = "arm-pmu"}, + {}, +}; + +/* + * CPU PMU identification and probing. + */ +static struct arm_pmu *__devinit probe_current_pmu(void) +{ + struct arm_pmu *pmu = NULL; + int cpu = get_cpu(); + unsigned long cpuid = read_cpuid_id(); + unsigned long implementor = (cpuid & 0xFF000000) >> 24; + unsigned long part_number = (cpuid & 0xFFF0); + + pr_info("probing PMU on CPU %d\n", cpu); + + /* ARM Ltd CPUs. */ + if (0x41 == implementor) { + switch (part_number) { + case 0xB360: /* ARM1136 */ + case 0xB560: /* ARM1156 */ + case 0xB760: /* ARM1176 */ + pmu = armv6pmu_init(); + break; + case 0xB020: /* ARM11mpcore */ + pmu = armv6mpcore_pmu_init(); + break; + case 0xC080: /* Cortex-A8 */ + pmu = armv7_a8_pmu_init(); + break; + case 0xC090: /* Cortex-A9 */ + pmu = armv7_a9_pmu_init(); + break; + case 0xC050: /* Cortex-A5 */ + pmu = armv7_a5_pmu_init(); + break; + case 0xC0F0: /* Cortex-A15 */ + pmu = armv7_a15_pmu_init(); + break; + case 0xC070: /* Cortex-A7 */ + pmu = armv7_a7_pmu_init(); + break; + } + /* Intel CPUs [xscale]. */ + } else if (0x69 == implementor) { + part_number = (cpuid >> 13) & 0x7; + switch (part_number) { + case 1: + pmu = xscale1pmu_init(); + break; + case 2: + pmu = xscale2pmu_init(); + break; + } + } + + put_cpu(); + return pmu; +} + +static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct arm_pmu *(*init_fn)(void); + struct device_node *node = pdev->dev.of_node; + + if (cpu_pmu) { + pr_info("attempt to register multiple PMU devices!"); + return -ENOSPC; + } + + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { + init_fn = of_id->data; + cpu_pmu = init_fn(); + } else { + cpu_pmu = probe_current_pmu(); + } + + if (!cpu_pmu) + return -ENODEV; + + cpu_pmu->plat_device = pdev; + cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&cpu_pmu_hotplug_notifier); + armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + + return 0; +} + +static struct platform_driver cpu_pmu_driver = { + .driver = { + .name = "arm-pmu", + .pm = &armpmu_dev_pm_ops, + .of_match_table = cpu_pmu_of_device_ids, + }, + .probe = cpu_pmu_device_probe, + .id_table = cpu_pmu_plat_device_ids, +}; + +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&cpu_pmu_driver); +} +device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index c90fcb2b696..6ccc0797174 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -645,7 +645,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, static int armv6_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6_perf_map, + return armpmu_map_event(event, &armv6_perf_map, &armv6_perf_cache_map, 0xFF); } @@ -664,7 +664,7 @@ static struct arm_pmu armv6pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return &armv6pmu; } @@ -679,7 +679,7 @@ static struct arm_pmu *__init armv6pmu_init(void) static int armv6mpcore_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6mpcore_perf_map, + return armpmu_map_event(event, &armv6mpcore_perf_map, &armv6mpcore_perf_cache_map, 0xFF); } @@ -698,17 +698,17 @@ static struct arm_pmu armv6mpcore_pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f04070bd218..bd4b090ebcf 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1204,31 +1204,31 @@ static void armv7pmu_reset(void *info) static int armv7_a8_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a8_perf_map, + return armpmu_map_event(event, &armv7_a8_perf_map, &armv7_a8_perf_cache_map, 0xFF); } static int armv7_a9_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a9_perf_map, + return armpmu_map_event(event, &armv7_a9_perf_map, &armv7_a9_perf_cache_map, 0xFF); } static int armv7_a5_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a5_perf_map, + return armpmu_map_event(event, &armv7_a5_perf_map, &armv7_a5_perf_cache_map, 0xFF); } static int armv7_a15_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a15_perf_map, + return armpmu_map_event(event, &armv7_a15_perf_map, &armv7_a15_perf_cache_map, 0xFF); } static int armv7_a7_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a7_perf_map, + return armpmu_map_event(event, &armv7_a7_perf_map, &armv7_a7_perf_cache_map, 0xFF); } @@ -1245,7 +1245,7 @@ static struct arm_pmu armv7pmu = { .max_period = (1LLU << 32) - 1, }; -static u32 __init armv7_read_num_pmnc_events(void) +static u32 __devinit armv7_read_num_pmnc_events(void) { u32 nb_cnt; @@ -1256,7 +1256,7 @@ static u32 __init armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.map_event = armv7_a8_map_event; @@ -1264,7 +1264,7 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.map_event = armv7_a9_map_event; @@ -1272,7 +1272,7 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A5"; armv7pmu.map_event = armv7_a5_map_event; @@ -1280,7 +1280,7 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A15"; armv7pmu.map_event = armv7_a15_map_event; @@ -1289,7 +1289,7 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A7"; armv7pmu.map_event = armv7_a7_map_event; @@ -1298,27 +1298,27 @@ static struct arm_pmu *__init armv7_a7_pmu_init(void) return &armv7pmu; } #else -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index f759fe0bab6..426e19f380a 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -430,7 +430,7 @@ xscale1pmu_write_counter(int counter, u32 val) static int xscale_map_event(struct perf_event *event) { - return map_cpu_event(event, &xscale_perf_map, + return armpmu_map_event(event, &xscale_perf_map, &xscale_perf_cache_map, 0xFF); } @@ -449,7 +449,7 @@ static struct arm_pmu xscale1pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return &xscale1pmu; } @@ -816,17 +816,17 @@ static struct arm_pmu xscale2pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return &xscale2pmu; } #else -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return NULL; } -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c deleted file mode 100644 index 2334bf8a650..00000000000 --- a/arch/arm/kernel/pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/kernel/pmu.c - * - * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles - * Copyright (C) 2010 ARM Ltd, Will Deacon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/pmu.h> - -/* - * PMU locking to ensure mutual exclusion between different subsystems. - */ -static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)]; - -int -reserve_pmu(enum arm_pmu_type type) -{ - return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0; -} -EXPORT_SYMBOL_GPL(reserve_pmu); - -void -release_pmu(enum arm_pmu_type type) -{ - clear_bit_unlock(type, pmu_lock); -} -EXPORT_SYMBOL_GPL(release_pmu); diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 45c97b1ee9b..c18a5048b6c 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -29,7 +29,6 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/time.h> -#include <asm/pmu.h> #include <asm/mach/arch.h> #include <mach/dma.h> @@ -38,7 +37,7 @@ #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "core.h" @@ -116,7 +115,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pmu_resource, .num_resources = 1, }; diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index adbfb199458..4b50228a677 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -43,11 +43,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "clock.h" -#include <csp/secHw.h> #include <mach/csp/secHw_def.h> #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c index 96273ff3495..5050833817b 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ @@ -61,21 +61,21 @@ static int chipcHw_divide(int num, int denom) /****************************************************************************/ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ uint32_t dependentClockType = 0; uint32_t vcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -86,13 +86,13 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur } else { vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -187,51 +187,51 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur if (pPLLReg) { /* Obtain PLL clock frequency */ - if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (clock == chipcHw_CLOCK_DDR) { /* DDR frequency is configured in PLLDivider register */ - return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + return chipcHw_divide (vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { vcoHz >>= 1; } /* Obtain PLL clock frequency using VCO dividers */ - return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + return chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } } else if (pClockCtrl) { /* Obtain divider clock frequency */ uint32_t div; uint32_t freq = 0; - if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (pDependentClock) { /* Identify the dependent clock frequency */ switch (dependentClockType) { case PLL_CLOCK: - if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent PLL clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain PLL clock frequency using VCO dividers */ - div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK; freq = div ? chipcHw_divide(vcoHz, div) : 0; } break; case NON_PLL_CLOCK: - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent divider clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain divider clock frequency using XTAL dividers */ - div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256)); } } @@ -242,7 +242,7 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur freq = chipcHw_XTAL_FREQ_Hz; } - div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_DIV_MASK; return chipcHw_divide(freq, (div ? div : 256)); } return 0; @@ -261,9 +261,9 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ uint32_t freq /* [ IN ] Clock frequency in Hz */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ @@ -272,12 +272,12 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu uint32_t desVcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -289,16 +289,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Desired VCO frequency */ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + (((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1); } else { vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -307,8 +307,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu { REG_LOCAL_IRQ_SAVE; /* Dvide DDR_phy by two to obtain DDR_ctrl clock */ - pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->DDRClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->DDRClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->DDRClock; @@ -329,8 +328,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Configure the VPM:BUS ratio settings */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->VPMClock; @@ -428,9 +426,9 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* For DDR settings use only the PLL divider clock */ if (pPLLReg == &pChipcHw->DDRClock) { /* Set M1DIV for PLL1, which controls the DDR clock */ - reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); + reg32_write(&pChipcHw->PLLDivider, (readl(&pChipcHw->PLLDivider) & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + freq = chipcHw_divide(vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { @@ -441,7 +439,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK)); reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + freq = chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } /* Wait for for atleast 200ns as per the protocol to change frequency */ udelay(1); @@ -460,16 +458,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (pDependentClock) { switch (dependentClockType) { case PLL_CLOCK: - divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); + divider = chipcHw_divide(chipcHw_divide (desVcoHz, (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); break; case NON_PLL_CLOCK: { uint32_t sourceClock = 0; - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + uint32_t div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256)); } divider = chipcHw_divide(sourceClock, freq); @@ -483,7 +481,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (divider) { REG_LOCAL_IRQ_SAVE; /* Set the divider to obtain the required frequency */ - *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK); + writel((readl(pClockCtrl) & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK), pClockCtrl); REG_LOCAL_IRQ_RESTORE; return freq; } @@ -515,25 +513,26 @@ static int vpmPhaseAlignA0(void) int count = 0; for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) { - phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; + phaseControl = (readl(&pChipcHw->VPMClock) & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; phaseValue = 0; prevPhaseComp = 0; /* Step 1: Look for falling PH_COMP transition */ /* Read the contents of VPM Clock resgister */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); do { /* Store previous value of phase comparator */ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -557,12 +556,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl + 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -581,12 +581,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -605,12 +606,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -631,14 +633,14 @@ static int vpmPhaseAlignA0(void) /* Store previous value of phase comparator */ prevPhaseComp = phaseValue; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= - chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -661,13 +663,13 @@ static int vpmPhaseAlignA0(void) } /* For VPM Phase should be perfectly aligned. */ - phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); + phaseControl = (((readl(&pChipcHw->VPMClock) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT), &pChipcHw->VPMClock); /* Load new phase value */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } @@ -697,7 +699,7 @@ int chipcHw_vpmPhaseAlign(void) int adjustCount = 0; /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Disable HW VPM phase alignment */ chipcHw_vpmHwPhaseAlignDisable(); /* Enable SW VPM phase alignment */ @@ -715,23 +717,24 @@ int chipcHw_vpmPhaseAlign(void) phaseControl--; } else { /* Enable VPM access */ - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Return adjust count */ return adjustCount; } /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Count adjustment */ adjustCount++; } } /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); return -1; } diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c index 367df75d4bb..8377d805416 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ /* @@ -73,9 +73,9 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig2); pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | @@ -87,28 +87,30 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider2 = pllPreDivider2; + writel(pllPreDivider2, &pChipcHw->PLLPreDivider2); /* Set NDIV Frac */ - pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2); /* This has to be removed once the default values are fixed for PLL2. */ - pChipcHw->PLLControl12 = 0x38000700; - pChipcHw->PLLControl22 = 0x00000015; + writel(0x38000700, &pChipcHw->PLLControl12); + writel(0x00000015, &pChipcHw->PLLControl22); /* Reset PLL2 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } else { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } REG_LOCAL_IRQ_RESTORE; } @@ -119,22 +121,25 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig2 &= + writel(readl(&pChipcHw->PLLConfig2) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + chipcHw_REG_PLL_CONFIG_POWER_DOWN), + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; { REG_LOCAL_IRQ_SAVE; /* Remove digital reset */ - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig2) & + ~chipcHw_REG_PLL_CONFIG_D_RESET, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -157,9 +162,9 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig); /* Setting VCO frequency */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { pllPreDivider = @@ -182,30 +187,22 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) } /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider = pllPreDivider; + writel(pllPreDivider, &pChipcHw->PLLPreDivider); /* Set NDIV Frac */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f_SS; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider); } else { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider); } /* Reset PLL1 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } else { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } REG_LOCAL_IRQ_RESTORE; @@ -216,22 +213,19 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED) - || !(pChipcHw-> - PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED) + || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; /* Remove digital reset */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } } @@ -267,11 +261,7 @@ void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initializ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET); /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */ - pChipcHw->ACLKClock = - (pChipcHw-> - ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> - armBusRatio & - chipcHw_REG_ACLKClock_CLK_DIV_MASK); + writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock); /* Set various core component frequencies. The order in which this is done is important for some. */ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */ diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c index 2671d8896bb..f95ce913fa1 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c @@ -13,11 +13,11 @@ *****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/intcHw.h> -#include <csp/cache.h> +#include <mach/csp/intcHw_reg.h> +#include <asm/cacheflush.h> /* ---- Private Constants and Types --------------------------------------- */ /* ---- Private Variables ------------------------------------------------- */ @@ -50,17 +50,18 @@ void chipcHw_reset(uint32_t mask) chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); } /* Bypass the PLL clocks before reboot */ - pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; + writel(readl(&pChipcHw->UARTClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->UARTClock); + writel(readl(&pChipcHw->SPIClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->SPIClock); /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */ do { - ((uint32_t *) MM_IO_BASE_ARAM)[i] = - ((uint32_t *) &chipcHw_reset_run_from_aram)[i]; + writel(((uint32_t *) &chipcHw_reset_run_from_aram)[i], ((uint32_t __iomem *) MM_IO_BASE_ARAM) + i); i++; - } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ + } while (readl(((uint32_t __iomem*) MM_IO_BASE_ARAM) + i - 1) != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ - CSP_CACHE_FLUSH_ALL; + flush_cache_all(); /* run the function from ARAM */ runFunc(); diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c index 6b9be2e98e5..547f746c7ff 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c @@ -25,11 +25,11 @@ /****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/string.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> #include <mach/csp/chipcHw_inline.h> @@ -55,33 +55,32 @@ static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handl ) { uint32_t val = 0; dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_MISC_t *pMiscReg = - (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module); + dmacHw_MISC_t __iomem *pMiscReg = (void __iomem *)dmacHw_REG_MISC_BASE(pCblk->module); switch (pCblk->channel) { case 0: - val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm2.lo) & 0x70000000) >> 28; break; case 1: - val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.hi) & 0x70000000) >> 28; break; case 2: - val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.lo) & 0x70000000) >> 28; break; case 3: - val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.hi) & 0x70000000) >> 28; break; case 4: - val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.lo) & 0x70000000) >> 28; break; case 5: - val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.hi) & 0x70000000) >> 28; break; case 6: - val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.lo) & 0x70000000) >> 28; break; case 7: - val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm6.hi) & 0x70000000) >> 28; break; } diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index a1f328357aa..fe438699d11 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c index 16225e43f3c..dc4137ff75c 100644 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> +#include <linux/errno.h> +#include <linux/types.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/csp/tmrHw_reg.h> #define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0 diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h deleted file mode 100644 index f01da877148..00000000000 --- a/arch/arm/mach-bcmring/include/cfg_global.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _CFG_GLOBAL_H_ -#define _CFG_GLOBAL_H_ - -#include <cfg_global_defines.h> - -#define CFG_GLOBAL_CHIP BCM11107 -#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING -#define CFG_GLOBAL_CHIP_REV 0xB0 -#define CFG_GLOBAL_RAM_SIZE 0x10000000 -#define CFG_GLOBAL_RAM_BASE 0x00000000 -#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 - -#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h deleted file mode 100644 index caa20e59db9..00000000000 --- a/arch/arm/mach-bcmring/include/csp/cache.h +++ /dev/null @@ -1,35 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_CACHE_H -#define CSP_CACHE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include <csp/stdint.h> - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include <asm/cacheflush.h> - -#define CSP_CACHE_FLUSH_ALL flush_cache_all() - -#else - -#define CSP_CACHE_FLUSH_ALL - -#endif - -#endif /* CSP_CACHE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h deleted file mode 100644 index 8b3d8036729..00000000000 --- a/arch/arm/mach-bcmring/include/csp/delay.h +++ /dev/null @@ -1,36 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_DELAY_H -#define CSP_DELAY_H - -/* ---- Include Files ---------------------------------------------------- */ - -/* Some CSP routines require use of the following delay routines. Use the OS */ -/* version if available, otherwise use a CSP specific definition. */ -/* void udelay(unsigned long usecs); */ -/* void mdelay(unsigned long msecs); */ - -#if defined(__KERNEL__) && !defined(STANDALONE) - #include <linux/delay.h> -#else - #include <mach/csp/delay.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_DELAY_H */ diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h deleted file mode 100644 index 51357dd5b66..00000000000 --- a/arch/arm/mach-bcmring/include/csp/errno.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_ERRNO_H -#define CSP_ERRNO_H - -/* ---- Include Files ---------------------------------------------------- */ - -#if defined(__KERNEL__) -#include <linux/errno.h> -#elif defined(CSP_SIMULATION) -#include <asm-generic/errno.h> -#else -#include <errno.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_ERRNO_H */ diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h deleted file mode 100644 index 1c639c8ee08..00000000000 --- a/arch/arm/mach-bcmring/include/csp/intcHw.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -/****************************************************************************/ -/** -* @file intcHw.h -* -* @brief generic interrupt controller API -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_H -#define _INTCHW_H - -/* ---- Include Files ---------------------------------------------------- */ -#include <mach/csp/intcHw_reg.h> - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask); -static inline void intcHw_irq_enable(void *basep, uint32_t mask); - -#endif /* _INTCHW_H */ - diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h deleted file mode 100644 index c30d2a5975a..00000000000 --- a/arch/arm/mach-bcmring/include/csp/module.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_MODULE_H -#define CSP_MODULE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/module.h> -#else - #define EXPORT_SYMBOL(symbol) -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_MODULE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h deleted file mode 100644 index b9d7e0732df..00000000000 --- a/arch/arm/mach-bcmring/include/csp/secHw.h +++ /dev/null @@ -1,65 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw.h -* -* @brief Definitions for accessing low level security features -* -*/ -/****************************************************************************/ -#ifndef SECHW_H -#define SECHW_H - -typedef void (*secHw_FUNC_t) (void); - -typedef enum { - secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */ - secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */ -} secHw_MODE; - -/****************************************************************************/ -/** -* @brief Requesting to execute the function in secure mode -* -* This function requests the given function to run in secure mode -* -*/ -/****************************************************************************/ -void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */ - ); - -/****************************************************************************/ -/** -* @brief Sets the mode -* -* his function sets the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_SetMode(secHw_MODE /* Processor mode */ - ); - -/****************************************************************************/ -/** -* @brief Get the current mode -* -* This function retieves the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_GetMode(secHw_MODE *); - -#endif /* SECHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h deleted file mode 100644 index 3a8718bbf70..00000000000 --- a/arch/arm/mach-bcmring/include/csp/stdint.h +++ /dev/null @@ -1,30 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_STDINT_H -#define CSP_STDINT_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <stdint.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_STDINT_H */ diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h deleted file mode 100644 index ad9e4005f14..00000000000 --- a/arch/arm/mach-bcmring/include/csp/string.h +++ /dev/null @@ -1,34 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - - -#ifndef CSP_STRING_H -#define CSP_STRING_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/string.h> -#else - #include <string.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_STRING_H */ - diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/mach/cfg_global.h index b5beb0b3073..449133eacdf 100644 --- a/arch/arm/mach-bcmring/include/cfg_global_defines.h +++ b/arch/arm/mach-bcmring/include/mach/cfg_global.h @@ -38,3 +38,14 @@ #define IMAGE_HEADER_SIZE_CHECKSUM 4 #endif +#ifndef _CFG_GLOBAL_H_ +#define _CFG_GLOBAL_H_ + +#define CFG_GLOBAL_CHIP BCM11107 +#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING +#define CFG_GLOBAL_CHIP_REV 0xB0 +#define CFG_GLOBAL_RAM_SIZE 0x10000000 +#define CFG_GLOBAL_RAM_BASE 0x00000000 +#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 + +#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h index 933ce68ed90..0a89e0c6341 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h @@ -17,7 +17,7 @@ /* ---- Include Files ---------------------------------------------------- */ #include <mach/csp/cap.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> /* ---- Public Constants and Types --------------------------------------- */ #define CAP_CONFIG0_VPM_DIS 0x00000001 diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 161973385fa..39f09cb8920 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -17,9 +17,9 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> /* ---- Public Constants and Types ---------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index 03238c29900..a66f3f7abb8 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -17,8 +17,8 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> #include <mach/csp/chipcHw_def.h> @@ -47,7 +47,7 @@ static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, /****************************************************************************/ static inline uint32_t chipcHw_getChipId(void) { - return pChipcHw->ChipId; + return readl(&pChipcHw->ChipId); } /****************************************************************************/ @@ -59,15 +59,16 @@ static inline uint32_t chipcHw_getChipId(void) /****************************************************************************/ static inline void chipcHw_enableSpreadSpectrum(void) { - if ((pChipcHw-> - PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != + if ((readl(&pChipcHw-> + PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - ddrcReg_PHY_ADDR_CTL_REGP->ssCfg = - (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | + writel((0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK << - ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT); - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |= - ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; + ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT), + &ddrcReg_PHY_ADDR_CTL_REGP->ssCfg); + writel(readl(&ddrcReg_PHY_ADDR_CTL_REGP->ssCtl) | + ddrcReg_PHY_ADDR_SS_CTRL_ENABLE, + &ddrcReg_PHY_ADDR_CTL_REGP->ssCtl); } } @@ -93,8 +94,8 @@ static inline void chipcHw_disableSpreadSpectrum(void) /****************************************************************************/ static inline uint32_t chipcHw_getChipProductId(void) { - return (pChipcHw-> - ChipId & chipcHw_REG_CHIPID_BASE_MASK) >> + return (readl(&pChipcHw-> + ChipId) & chipcHw_REG_CHIPID_BASE_MASK) >> chipcHw_REG_CHIPID_BASE_SHIFT; } @@ -109,7 +110,7 @@ static inline uint32_t chipcHw_getChipProductId(void) /****************************************************************************/ static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void) { - return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK; + return readl(&pChipcHw->ChipId) & chipcHw_REG_CHIPID_REV_MASK; } /****************************************************************************/ @@ -156,7 +157,7 @@ static inline void chipcHw_busInterfaceClockDisable(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getBusInterfaceClockStatus(void) { - return pChipcHw->BusIntfClock; + return readl(&pChipcHw->BusIntfClock); } /****************************************************************************/ @@ -215,8 +216,9 @@ static inline void chipcHw_softResetDisable(uint64_t mask) /* Deassert module soft reset */ REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 ^= ctrl1; - pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset1) ^ ctrl1, &pChipcHw->SoftReset1); + writel(readl(&pChipcHw->SoftReset2) ^ (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); REG_LOCAL_IRQ_RESTORE; } @@ -227,9 +229,10 @@ static inline void chipcHw_softResetEnable(uint64_t mask) uint32_t unhold = 0; REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 |= ctrl1; + writel(readl(&pChipcHw->SoftReset1) | ctrl1, &pChipcHw->SoftReset1); /* Mask out unhold request bits */ - pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset2) | (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); /* Process unhold requests */ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) { @@ -246,7 +249,7 @@ static inline void chipcHw_softResetEnable(uint64_t mask) if (unhold) { /* Make sure unhold request is effective */ - pChipcHw->SoftReset1 &= ~unhold; + writel(readl(&pChipcHw->SoftReset1) & ~unhold, &pChipcHw->SoftReset1); } REG_LOCAL_IRQ_RESTORE; } @@ -307,7 +310,7 @@ static inline void chipcHw_setOTPOption(uint64_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getStickyBits(void) { - return pChipcHw->Sticky; + return readl(&pChipcHw->Sticky); } /****************************************************************************/ @@ -328,7 +331,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_POR_BROM; } else { uint32_t sticky; - sticky = pChipcHw->Sticky; + sticky = readl(pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) { @@ -355,7 +358,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits; + writel(bits, pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -377,7 +380,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 | chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 | chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) { - uint32_t sticky = pChipcHw->Sticky; + uint32_t sticky = readl(&pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) { @@ -410,7 +413,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) mask &= ~chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits | mask; + writel(bits | mask, &pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -426,7 +429,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getSoftStraps(void) { - return pChipcHw->SoftStraps; + return readl(&pChipcHw->SoftStraps); } /****************************************************************************/ @@ -456,7 +459,7 @@ static inline void chipcHw_setSoftStraps(uint32_t strapOptions) /****************************************************************************/ static inline uint32_t chipcHw_getPinStraps(void) { - return pChipcHw->PinStraps; + return readl(&pChipcHw->PinStraps); } /****************************************************************************/ @@ -671,9 +674,9 @@ static inline void chipcHw_selectGE3(void) /****************************************************************************/ static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin) { - return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) & + return (readl(chipcHw_REG_GPIO_MUX(pin))) & (chipcHw_REG_GPIO_MUX_MASK << - chipcHw_REG_GPIO_MUX_POSITION(pin))) >> + chipcHw_REG_GPIO_MUX_POSITION(pin)) >> chipcHw_REG_GPIO_MUX_POSITION(pin); } @@ -841,8 +844,8 @@ static inline void chipcHw_setUsbDevice(void) static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, chipcHw_OPTYPE_e type, int mode) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; switch (clock) { case chipcHw_CLOCK_DDR: @@ -1071,7 +1074,7 @@ static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock) /****************************************************************************/ static inline int chipcHw_isSoftwareStrapsEnable(void) { - return pChipcHw->SoftStraps & 0x00000001; + return readl(&pChipcHw->SoftStraps) & 0x00000001; } /****************************************************************************/ @@ -1138,7 +1141,7 @@ static inline void chipcHw_pll2TestDisable(void) /****************************************************************************/ static inline int chipcHw_isPllTestEnable(void) { - return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1147,7 +1150,7 @@ static inline int chipcHw_isPllTestEnable(void) /****************************************************************************/ static inline int chipcHw_isPll2TestEnable(void) { - return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1183,8 +1186,8 @@ static inline void chipcHw_pll2TestSelect(uint32_t val) /****************************************************************************/ static inline uint8_t chipcHw_getPllTestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1194,8 +1197,8 @@ static inline uint8_t chipcHw_getPllTestSelected(void) /****************************************************************************/ static inline uint8_t chipcHw_getPll2TestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1208,7 +1211,8 @@ static inline uint8_t chipcHw_getPll2TestSelected(void) static inline void chipcHw_pll1Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } @@ -1221,7 +1225,8 @@ static inline void chipcHw_pll1Disable(void) static inline void chipcHw_pll2Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig2) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -1233,7 +1238,8 @@ static inline void chipcHw_pll2Disable(void) static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1245,7 +1251,8 @@ static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) static inline void chipcHw_ddrPhaseAlignInterruptDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1333,7 +1340,8 @@ static inline void chipcHw_ddrHwPhaseAlignDisable(void) static inline void chipcHw_vpmSwPhaseAlignEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) | chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1372,7 +1380,8 @@ static inline void chipcHw_vpmHwPhaseAlignEnable(void) static inline void chipcHw_vpmHwPhaseAlignDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) & ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1474,8 +1483,8 @@ chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin) /****************************************************************************/ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1488,8 +1497,8 @@ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1500,8 +1509,8 @@ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> chipcHw_REG_DDR_PHASE_STATUS_SHIFT; } @@ -1513,8 +1522,8 @@ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> chipcHw_REG_VPM_PHASE_STATUS_SHIFT; } @@ -1526,8 +1535,8 @@ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> chipcHw_REG_DDR_PHASE_CTRL_SHIFT; } @@ -1539,8 +1548,8 @@ static inline uint32_t chipcHw_getDdrPhaseControl(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> chipcHw_REG_VPM_PHASE_CTRL_SHIFT; } diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h index b162448f613..26f5d0e4e1d 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h @@ -24,7 +24,7 @@ #define CHIPCHW_REG_H #include <mach/csp/mm_io.h> -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/ddrcReg.h> #define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC @@ -131,8 +131,8 @@ typedef struct { uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ } chipcHw_REG_t; -#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) -#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) +#define pChipcHw ((chipcHw_REG_t __iomem *) chipcHw_BASE_ADDRESS) +#define pChipcPhysical (MM_ADDR_IO_CHIPC) #define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 #define chipcHw_REG_CHIPID_BASE_SHIFT 12 diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h index f1b68e26fa6..39da2c1fdaf 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h @@ -30,8 +30,8 @@ extern "C" { /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> -#include <csp/stdint.h> +#include <mach/csp/reg.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> @@ -416,7 +416,7 @@ extern "C" { } ddrcReg_PHY_ADDR_CTL_REG_t; #define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400 -#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) +#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t __iomem*) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) /* @todo These SS definitions are duplicates of ones below */ diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h index e6a1dc484ca..9dc90f46a84 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h @@ -23,9 +23,9 @@ #ifndef _DMACHW_H #define _DMACHW_H -#include <stddef.h> +#include <linux/stddef.h> -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/dmacHw_reg.h> /* Define DMA Channel ID using DMA controller number (m) and channel number (c). diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index d67e2f8c22d..9d9455e0c39 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_PRIV_H #define _DMACHW_PRIV_H -#include <csp/stdint.h> +#include <linux/types.h> /* Data type for DMA Link List Item */ typedef struct { diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h index f1ecf96f2da..7cd0aafa6f6 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_REG_H #define _DMACHW_REG_H -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> /* Data type for 64 bit little endian register */ @@ -121,75 +121,75 @@ typedef struct { } dmacHw_MISC_t; /* Base registers */ -#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ -#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ +#define dmacHw_0_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ +#define dmacHw_1_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ extern uint32_t dmaChannelCount_0; extern uint32_t dmaChannelCount_1; /* Define channel specific registers */ -#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) +#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t __iomem*) ((char __iomem*)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) /* Raw interrupt status registers */ -#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) -#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) -#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) -#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) -#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) -#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) +#define dmacHw_REG_INT_RAW_BASE(module) ((char __iomem *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) +#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) +#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) +#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) +#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) +#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) -#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) -#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) -#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) -#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) -#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) +#define dmacHw_REG_INT_STAT_BASE(module) ((char __iomem*)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) +#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) +#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) +#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) +#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) +#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) -#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) -#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) -#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) -#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) -#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) +#define dmacHw_REG_INT_MASK_BASE(module) ((char __iomem*)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) +#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) +#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) +#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) +#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) +#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) /* Interrupt clear registers */ -#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) -#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) -#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) -#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) -#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) -#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) -#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) +#define dmacHw_REG_INT_CLEAR_BASE(module) ((char __iomem*)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) +#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) +#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) +#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) +#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) +#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) +#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) /* Software handshaking registers */ -#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) -#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) +#define dmacHw_REG_SW_HS_BASE(module) ((char __iomem*)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) +#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) /* Miscellaneous registers */ -#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) -#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) -#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) -#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) -#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) -#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) -#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) -#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) -#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) -#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) -#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) -#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) -#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) -#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) -#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) +#define dmacHw_REG_MISC_BASE(module) ((char __iomem*)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) +#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) +#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) +#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) +#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) +#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) +#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) +#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) +#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) +#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) +#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) +#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) +#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) +#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) +#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) /* Channel control registers */ #define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo) diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h index cfa91bed9d3..27f59dd2779 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h @@ -18,7 +18,7 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/cap_inline.h> #if defined(__KERNEL__) diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index 0aeb6a6fe7f..f59db25b563 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -27,8 +27,8 @@ #define _INTCHW_REG_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Public Constants and Types --------------------------------------- */ @@ -37,9 +37,9 @@ #define INTCHW_NUM_INTC 3 /* Defines for interrupt controllers. This simplifies and cleans up the function calls. */ -#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0) -#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1) -#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC) +#define INTCHW_INTC0 (MM_IO_BASE_INTC0) +#define INTCHW_INTC1 (MM_IO_BASE_INTC1) +#define INTCHW_SINTC (MM_IO_BASE_SINTC) /* INTC0 - interrupt controller 0 */ #define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */ @@ -232,15 +232,15 @@ /* ---- Public Variable Externs ------------------------------------------ */ /* ---- Public Function Prototypes --------------------------------------- */ /* Clear one or more IRQ interrupts. */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask) +static inline void intcHw_irq_disable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENCLEAR) = mask; + writel(mask, basep + INTCHW_INTENCLEAR); } /* Enables one or more IRQ interrupts. */ -static inline void intcHw_irq_enable(void *basep, uint32_t mask) +static inline void intcHw_irq_enable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENABLE) = mask; + writel(mask, basep + INTCHW_INTENABLE); } #endif /* _INTCHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h index ad58cf87337..d571962f290 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h @@ -29,7 +29,7 @@ /* ---- Include Files ---------------------------------------------------- */ #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h index de92ec6a01a..47450c23685 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h @@ -30,7 +30,7 @@ #include <mach/csp/mm_addr.h> #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ @@ -49,7 +49,7 @@ #ifdef __ASSEMBLY__ #define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)) #else -#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ +#define MM_IO_PHYS_TO_VIRT(phys) (void __iomem *)(((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))) #endif #endif @@ -60,8 +60,8 @@ #ifdef __ASSEMBLY__ #define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)) #else -#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ - ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))) +#define MM_IO_VIRT_TO_PHYS(virt) (((unsigned long)(virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ + ((((unsigned long)(virt) & 0x0F000000) << 4) | ((unsigned long)(virt) & 0xFFFFFF))) #endif #endif diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/mach/csp/reg.h index 56654d23c3d..d9cbdca8cd2 100644 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/reg.h @@ -25,13 +25,14 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> +#include <linux/io.h> /* ---- Public Constants and Types --------------------------------------- */ -#define __REG32(x) (*((volatile uint32_t *)(x))) -#define __REG16(x) (*((volatile uint16_t *)(x))) -#define __REG8(x) (*((volatile uint8_t *) (x))) +#define __REG32(x) (*((volatile uint32_t __iomem *)(x))) +#define __REG16(x) (*((volatile uint16_t __iomem *)(x))) +#define __REG8(x) (*((volatile uint8_t __iomem *) (x))) /* Macros used to define a sequence of reserved registers. The start / end */ /* are byte offsets in the particular register definition, with the "end" */ @@ -84,31 +85,31 @@ #endif -static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_and(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg &= value; + __raw_writel(__raw_readl(reg) & value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_or(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg |= value; + __raw_writel(__raw_readl(reg) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask, +static inline void reg32_modify_mask(volatile uint32_t __iomem *reg, uint32_t mask, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg = (*reg & mask) | value; + __raw_writel((__raw_readl(reg) & mask) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_write(volatile uint32_t *reg, uint32_t value) +static inline void reg32_write(volatile uint32_t __iomem *reg, uint32_t value) { - *reg = value; + __raw_writel(value, reg); } #endif /* CSP_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h index 9cd6a032ab7..55d3cd4fd1e 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h @@ -34,7 +34,7 @@ /****************************************************************************/ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF; @@ -53,13 +53,13 @@ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK /****************************************************************************/ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF; + writel(mask & 0x0000FFFF, ®p->reg[secHw_IDX_LS].setUnsecure); } if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16; + writel(mask >> 16, ®p->reg[secHw_IDX_MS].setUnsecure); } } @@ -71,7 +71,7 @@ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MA /****************************************************************************/ static inline uint32_t secHw_getStatus(void) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; return (regp->reg[1].status << 16) + regp->reg[0].status; } diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h index 2cbb530db8e..1cc882ae60f 100644 --- a/arch/arm/mach-bcmring/include/csp/tmrHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h @@ -23,7 +23,7 @@ #ifndef _TMRHW_H #define _TMRHW_H -#include <csp/stdint.h> +#include <linux/types.h> typedef uint32_t tmrHw_ID_t; /* Timer ID */ typedef uint32_t tmrHw_COUNT_t; /* Timer count */ diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 72543781207..13e01384d6f 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -27,7 +27,7 @@ #include <linux/kernel.h> #include <linux/semaphore.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/timer.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 6ae20a649a9..a0c92b4b8c6 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,7 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/mm_io.h> /* Hardware addresses of major areas. diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h index 387376ffb56..f8d51a8b0b1 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_nand.h +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_NAND_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/reg_umi.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 0992842caa7..56dd9de7d83 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_UMI_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -233,5 +233,5 @@ #define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 /* location within a page (512 byte) */ #define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 -#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (readl(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) #endif diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c index 1adec78ec94..33824a81cac 100644 --- a/arch/arm/mach-bcmring/mm.c +++ b/arch/arm/mach-bcmring/mm.c @@ -20,12 +20,12 @@ #include <mach/hardware.h> #include <mach/csp/mm_io.h> -#define IO_DESC(va, sz) { .virtual = va, \ +#define IO_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_DEVICE } -#define MEM_DESC(va, sz) { .virtual = va, \ +#define MEM_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_MEMORY } diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c index af9c3d7e2a0..59412903466 100644 --- a/arch/arm/mach-bcmring/timer.c +++ b/arch/arm/mach-bcmring/timer.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <linux/module.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/timer.h> /* The core.c file initializes timers 1 and 3 as a linux clocksource. */ diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 6321567d8ea..cc4c6a5a357 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -49,16 +49,6 @@ static struct map_desc dove_io_desc[] __initdata = { .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE0_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE), - .length = DOVE_PCIE0_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE1_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE), - .length = DOVE_PCIE1_IO_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index d52b0ef313b..c91e3004a47 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -50,14 +50,12 @@ #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 -#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000 #define DOVE_PCIE0_IO_BUS_BASE 0x00000000 -#define DOVE_PCIE0_IO_SIZE SZ_1M +#define DOVE_PCIE0_IO_SIZE SZ_64K #define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 -#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000 -#define DOVE_PCIE1_IO_BUS_BASE 0x00100000 -#define DOVE_PCIE1_IO_SIZE SZ_1M +#define DOVE_PCIE1_IO_BUS_BASE 0x00010000 +#define DOVE_PCIE1_IO_SIZE SZ_64K /* * Dove Core Registers Map diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h deleted file mode 100644 index 29c8b85355a..00000000000 --- a/arch/arm/mach-dove/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "dove.h" - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ - DOVE_PCIE0_IO_VIRT_BASE)) - -#endif diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 47921b0cdc6..355332d502c 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -26,9 +26,8 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char io_space_name[16]; char mem_space_name[16]; - struct resource res[2]; + struct resource res; }; static struct pcie_port pcie_port[2]; @@ -53,24 +52,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_setup(pp->base); - /* - * IORESOURCE_IO - */ - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d I/O", pp->index); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - if (pp->index == 0) { - pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1; - } else { - pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1; - } - pp->res[0].flags = IORESOURCE_IO; - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + if (pp->index == 0) + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE); + else + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE); /* * IORESOURCE_MEM @@ -78,18 +63,18 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d MEM", pp->index); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; + pp->res.name = pp->mem_space_name; if (pp->index == 0) { - pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1; } else { - pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1; } - pp->res[1].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[1])) + pp->res.flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res)) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); return 1; } @@ -210,7 +195,7 @@ static void __init add_pcie_port(int index, unsigned long base) pp->root_bus_nr = -1; pp->base = (void __iomem *)base; spin_lock_init(&pp->conf_lock); - memset(pp->res, 0, sizeof(pp->res)); + memset(&pp->res, 0, sizeof(pp->res)); } else { printk(KERN_INFO "link down, ignoring\n"); } diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index 774533c6706..3b00e299b62 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -166,11 +166,6 @@ static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); } -static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable); -} - static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); @@ -672,10 +667,6 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { - .name = "gps", - .enable = exynos5_clk_ip_gps_ctrl, - .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)), - }, { .name = "nfcon", .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 22), diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index c72b675b3e4..9d1f3ac86db 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -131,7 +131,6 @@ #define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000 #define EXYNOS5_PA_SYSMMU_IOP 0x12360000 #define EXYNOS5_PA_SYSMMU_RTIC 0x12370000 -#define EXYNOS5_PA_SYSMMU_GPS 0x12630000 #define EXYNOS5_PA_SYSMMU_ISP 0x13260000 #define EXYNOS5_PA_SYSMMU_DRC 0x12370000 #define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000 diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 3e6aaa6361d..a42b369bc43 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> - + #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> @@ -26,6 +26,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "common.h" @@ -175,11 +176,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, .type = MT_DEVICE, - }, { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, }, #endif }; @@ -196,8 +192,10 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (footbridge_cfn_mode()) + if (footbridge_cfn_mode()) { iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); + } } void footbridge_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 9d62e338102..a7cd2cf5e08 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -276,8 +276,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); + pci_ioremap_io(0, DC21285_PCI_IO); + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); @@ -298,7 +298,7 @@ void __init dc21285_preinit(void) mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) if (mem_mask >= mem_size) - break; + break; /* * These registers need to be set up whether we're the @@ -350,14 +350,6 @@ void __init dc21285_preinit(void) "PCI data parity", NULL); if (cfn_mode) { - static struct resource csrio; - - csrio.flags = IORESOURCE_IO; - csrio.name = "Footbridge"; - - allocate_resource(&ioport_resource, &csrio, 128, - 0xff00, 0xffff, 128, NULL, NULL); - /* * Map our SDRAM at a known address in PCI space, just in case * the firmware had other ideas. Using a nonzero base is @@ -365,7 +357,7 @@ void __init dc21285_preinit(void) * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). */ *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = csrio.start; + *CSR_PCICSRIOBASE = 0; *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); *CSR_PCIROMBASE = 0; *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index e5acde25ffc..c169f0c99b2 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,7 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 - orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e00000 @ virtual orr \rp, \rp, #0x7c000000 @ physical .endm diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index aba531eebbc..aba46388cc0 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -14,18 +14,10 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#ifdef CONFIG_MMU -#define MMU_IO(a, b) (a) -#else -#define MMU_IO(a, b) (b) -#endif - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) - /* - * Translation of various region addresses to virtual addresses + * Translation of various i/o addresses to host addresses for !CONFIG_MMU */ +#define PCIO_BASE 0x7c000000 #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index d004d37ad9d..d1204198ca8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -13,7 +13,7 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o + clk-pfd.o clk-busy.o clk.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index ea13e61bd5f..cf65148bc51 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -23,7 +23,6 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/clkdev.h> #include <linux/err.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 4bdcaa97bd9..f89c4403a92 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -39,10 +39,10 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; -static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", }; +static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", }; static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", }; -static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", }; +static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", }; static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 2d856f9ccf5..02be7317891 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -6,7 +6,7 @@ #include <linux/err.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/clock.h> + #include "clk.h" /** @@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv1 *pll = to_clk_pllv1(hw); + long long ll; + int mfn_abs; + unsigned int mfi, mfn, mfd, pd; + u32 reg; + unsigned long rate; + + reg = readl(pll->base); + + /* + * Get the resulting clock rate from a PLL register value and the input + * frequency. PLLs with this register layout can be found on i.MX1, + * i.MX21, i.MX27 and i,MX31 + * + * mfi + mfn / (mfd + 1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ + + mfi = (reg >> 10) & 0xf; + mfn = reg & 0x3ff; + mfd = (reg >> 16) & 0x3ff; + pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + mfn_abs = mfn; + + /* + * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit + * 2's complements number + */ + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + mfn_abs = 0x400 - mfn; + + rate = parent_rate * 2; + rate /= pd + 1; + + ll = (unsigned long long)rate * mfn_abs; + + do_div(ll, mfd + 1); + + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + ll = -ll; + + ll = (rate * mfi) + ll; - return mxc_decode_pll(readl(pll->base), parent_rate); + return ll; } struct clk_ops clk_pllv1_ops = { diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c new file mode 100644 index 00000000000..f5e8be8e7f1 --- /dev/null +++ b/arch/arm/mach-imx/clk.c @@ -0,0 +1,3 @@ +#include <linux/spinlock.h> + +DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 1bf64fe2523..5f2d8acca25 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -3,7 +3,8 @@ #include <linux/spinlock.h> #include <linux/clk-provider.h> -#include <mach/clock.h> + +extern spinlock_t imx_ccm_lock; struct clk *imx_clk_pllv1(const char *name, const char *parent, void __iomem *base); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 5d08533ab2c..8dc9d3edf17 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,7 +36,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/clock.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h deleted file mode 100644 index 8de70de3dd0..00000000000 --- a/arch/arm/mach-integrator/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) - -#endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index ec467baade0..4c034752685 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,6 +324,10 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 + /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 3b2267529f5..fd3ef28d2c1 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -50,6 +50,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include <asm/mach/time.h> #include <plat/fpga-irq.h> @@ -73,7 +74,7 @@ * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) * ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k) - * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) + * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) * ef000000 Cache flush * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers @@ -147,11 +148,6 @@ static struct map_desc ap_io_desc[] __initdata = { .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), .length = SZ_64K, .type = MT_DEVICE - }, { - .virtual = PCI_IO_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE), - .length = SZ_64K, - .type = MT_DEVICE } }; @@ -159,6 +155,7 @@ static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); vga_base = PCI_MEMORY_VADDR; + pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index b866880e82a..495f181fc93 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -41,61 +41,61 @@ /* * The V3 PCI interface chip in Integrator provides several windows from * local bus memory into the PCI memory areas. Unfortunately, there - * are not really enough windows for our usage, therefore we reuse + * are not really enough windows for our usage, therefore we reuse * one of the windows for access to PCI configuration space. The * memory map is as follows: - * + * * Local Bus Memory Usage - * + * * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable * 60000000 - 60FFFFFF PCI IO. 16M * 61000000 - 61FFFFFF PCI Configuration. 16M - * + * * There are three V3 windows, each described by a pair of V3 registers. * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2. * Base0 and Base1 can be used for any type of PCI memory access. Base2 * can be used either for PCI I/O or for I20 accesses. By default, uHAL * uses this only for PCI IO space. - * + * * Normally these spaces are mapped using the following base registers: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF - * + * * This means that I20 and PCI configuration space accesses will fail. - * When PCI configuration accesses are needed (via the uHAL PCI + * When PCI configuration accesses are needed (via the uHAL PCI * configuration space primitives) we must remap the spaces as follows: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1 - * + * * To make this work, the code depends on overlapping windows working. - * The V3 chip translates an address by checking its range within + * The V3 chip translates an address by checking its range within * each of the BASE/MAP pairs in turn (in ascending register number * order). It will use the first matching pair. So, for example, * if the same address is mapped by both LB_BASE0/LB_MAP0 and - * LB_BASE1/LB_MAP1, the V3 will use the translation from + * LB_BASE1/LB_MAP1, the V3 will use the translation from * LB_BASE0/LB_MAP0. - * + * * To allow PCI Configuration space access, the code enlarges the * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can * be remapped for use by configuration cycles. - * - * At the end of the PCI Configuration space accesses, + * + * At the end of the PCI Configuration space accesses, * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to * reveal the now restored LB_BASE1/LB_MAP1 window. - * + * * NOTE: We do not set up I2O mapping. I suspect that this is only * for an intelligent (target) device. Using I2O disables most of * the mappings into PCI memory. @@ -127,8 +127,8 @@ * * returns: configuration address to play on the PCI bus * - * To generate the appropriate PCI configuration cycles in the PCI - * configuration address space, you present the V3 with the following pattern + * To generate the appropriate PCI configuration cycles in the PCI + * configuration address space, you present the V3 with the following pattern * (which is very nearly a type 1 (except that the lower two bits are 00 and * not 01). In order for this mapping to work you need to set up one of * the local to PCI aperatures to 16Mbytes in length translating to @@ -138,7 +138,7 @@ * * Type 0: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| @@ -150,7 +150,7 @@ * * Type 1: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| @@ -161,7 +161,7 @@ * 15:11 Device number (5 bits) * 10:8 function number * 7:2 register number - * + * */ static DEFINE_RAW_SPINLOCK(v3_lock); @@ -374,12 +374,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) } /* - * the IO resource for this bus * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -498,7 +495,6 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; - pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; /* diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h deleted file mode 100644 index f1318851802..00000000000 --- a/arch/arm/mach-iop13xx/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * iop13xx custom ioremap implementation - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __iop13xx_io(a) - -extern void __iomem * __iop13xx_io(unsigned long io_addr); - -#endif diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h index e190dcd7d72..e10e101645d 100644 --- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h +++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h @@ -69,21 +69,11 @@ extern unsigned long get_iop_tick_rate(void); * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window * * IO MAP - * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window - * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window + * 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window + * 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window */ -#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL -#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL #define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIX_LOWER_IO_PA\ - - IOP13XX_PCIX_LOWER_IO_VA)) #define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL #define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL @@ -103,20 +93,8 @@ extern unsigned long get_iop_tick_rate(void); IOP13XX_PCIX_LOWER_MEM_BA) /* PCI-E ranges */ -#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL -#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIE_LOWER_IO_PA\ - - IOP13XX_PCIE_LOWER_IO_VA)) +#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */ #define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL #define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c index 3c364198db9..851dc8f2b6b 100644 --- a/arch/arm/mach-iop13xx/io.c +++ b/arch/arm/mach-iop13xx/io.c @@ -23,25 +23,6 @@ #include "pci.h" -void * __iomem __iop13xx_io(unsigned long io_addr) -{ - void __iomem * io_virt; - - switch (io_addr) { - case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA: - io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr); - break; - case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA: - io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr); - break; - default: - BUG(); - } - - return io_virt; -} -EXPORT_SYMBOL(__iop13xx_io); - static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie, size_t size, unsigned int mtype, void *caller) { @@ -67,12 +48,6 @@ static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie, (cookie - IOP13XX_PBI_LOWER_MEM_RA), size, mtype, __builtin_return_address(0)); break; - case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA: - retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie); - break; - case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA: - retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie); - break; case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA: retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie); break; @@ -99,8 +74,6 @@ static void __iop13xx_iounmap(volatile void __iomem *addr) goto skip; switch ((u32) addr) { - case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA: - case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA: case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA: goto skip; } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 861cb12ef43..91f731a2957 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -970,7 +970,6 @@ void __init iop13xx_pci_init(void) __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR); /* Setup the Min Address for PCI memory... */ - pcibios_min_io = 0; pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; /* if Linux is given control of an ATU @@ -1003,7 +1002,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr > 1) return 0; - res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); @@ -1042,17 +1041,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) << IOP13XX_ATUX_PCIXSR_FUNC_NUM; __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR); - res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIX_UPPER_IO_PA; - res[0].name = "IQ81340 ATUX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA); - res[1].start = IOP13XX_PCIX_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIX_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIX_LOWER_MEM_RA; + res->end = IOP13XX_PCIX_UPPER_MEM_RA; + res->name = "IQ81340 ATUX PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA; break; case IOP13XX_INIT_ATU_ATUE: /* Note: the function number field in the PCSR is ro */ @@ -1063,17 +1058,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) __raw_writel(pcsr, IOP13XX_ATUE_PCSR); - res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIE_UPPER_IO_PA; - res[0].name = "IQ81340 ATUE PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA); - res[1].start = IOP13XX_PCIE_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIE_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUE PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIE_LOWER_MEM_RA; + res->end = IOP13XX_PCIE_UPPER_MEM_RA; + res->name = "IQ81340 ATUE PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA; sys->map_irq = iop13xx_pcie_map_irq; break; default: @@ -1081,11 +1072,9 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) return 0; } - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); + request_resource(&iomem_resource, res); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index daabb1fa6c2..4a7f20d7fb6 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -40,16 +40,6 @@ static struct map_desc iop13xx_std_desc[] __initdata = { .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE), .length = IOP13XX_PMMR_SIZE, .type = MT_DEVICE, - }, { /* PCIE IO space */ - .virtual = IOP13XX_PCIE_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA), - .length = IOP13XX_PCIX_IO_WINDOW_SIZE, - .type = MT_DEVICE, - }, { /* PCIX IO space */ - .virtual = IOP13XX_PCIX_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA), - .length = IOP13XX_PCIX_IO_WINDOW_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h deleted file mode 100644 index e2ada265bb8..00000000000 --- a/arch/arm/mach-iop32x/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include <asm/hardware/iop3xx.h> - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) - -#endif diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h deleted file mode 100644 index f7c1b659566..00000000000 --- a/arch/arm/mach-iop33x/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include <asm/hardware/iop3xx.h> - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) - -#endif diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 1201191d7f1..3f7b05f30b4 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -42,16 +42,6 @@ ****************************************************************************/ static struct map_desc kirkwood_io_desc[] __initdata = { { - .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE), - .length = KIRKWOOD_PCIE_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE), - .length = KIRKWOOD_PCIE1_IO_SIZE, - .type = MT_DEVICE, - }, { .virtual = KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h deleted file mode 100644 index 5d0ab61700d..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "kirkwood.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) - + KIRKWOOD_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index c5b68510776..af4f0000dce 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -37,14 +37,12 @@ #define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000 -#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 +#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000 #define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_1M +#define KIRKWOOD_PCIE_IO_SIZE SZ_64K #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 #define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 6e8b2efa3c3..532d8acb38f 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -56,7 +56,7 @@ struct pcie_port { void __iomem *base; spinlock_t conf_lock; int irq; - struct resource res[2]; + struct resource res; }; static int pcie_port_map[2]; @@ -137,20 +137,12 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) pp->irq = IRQ_KIRKWOOD_PCIE; /* - * IORESOURCE_IO - */ - pp->res[0].name = "PCIe 0 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; - pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - - /* * IORESOURCE_MEM */ - pp->res[1].name = "PCIe 0 MEM"; - pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; - pp->res[1].flags = IORESOURCE_MEM; + pp->res.name = "PCIe 0 MEM"; + pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1; + pp->res.flags = IORESOURCE_MEM; } static void __init pcie1_ioresources_init(struct pcie_port *pp) @@ -159,20 +151,12 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp) pp->irq = IRQ_KIRKWOOD_PCIE1; /* - * IORESOURCE_IO - */ - pp->res[0].name = "PCIe 1 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE; - pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - - /* * IORESOURCE_MEM */ - pp->res[1].name = "PCIe 1 MEM"; - pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1; - pp->res[1].flags = IORESOURCE_MEM; + pp->res.name = "PCIe 1 MEM"; + pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; + pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1; + pp->res.flags = IORESOURCE_MEM; } static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) @@ -197,23 +181,21 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 0: kirkwood_enable_pcie_clk("0"); pcie0_ioresources_init(pp); + pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE); break; case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); + pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); } - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe%d IO resource failed\n", index); - if (request_resource(&iomem_resource, &pp->res[1])) + if (request_resource(&iomem_resource, &pp->res)) panic("Request PCIe%d Memory resource failed\n", index); - sys->io_offset = 0; - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); /* * Generic PCIe unit setup. diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h deleted file mode 100644 index e620cda99d2..00000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-timer.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-timer.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Timer registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_TIMER_H -#define KS8695_TIMER_H - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) - - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ - - -/* Timer Control Register */ -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - - -#endif diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index ec783a3070a..46c84bc7792 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -25,53 +25,98 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/regs-timer.h> #include <mach/regs-irq.h> #include "generic.h" +#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) +#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) +#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) + /* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() + * Timer registers */ -static unsigned long ks8695_gettimeoffset (void) +#define KS8695_TMCON (0x00) /* Timer Control Register */ +#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ +#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ +#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ +#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ + +/* Timer Control Register */ +#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ +#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ + +/* Timer0 Timeout Counter Register */ +#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ + +static void ks8695_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { - unsigned long elapsed, tick2, intpending; + u32 tmcon; - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for an - * interrupt. We solve this by ensuring that the counter has not - * reloaded between our two reads. - */ - elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD); - do { - tick2 = elapsed; - intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1); - elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD); - } while (elapsed > tick2); - - /* Convert to number of ticks expired (not remaining) */ - elapsed = (CLOCK_TICK_RATE / HZ) - elapsed; - - /* Is interrupt pending? If so, then timer has been reloaded already. */ - if (intpending) - elapsed += (CLOCK_TICK_RATE / HZ); - - /* Convert ticks to usecs */ - return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + if (mode == CLOCK_EVT_FEAT_PERIODIC) { + u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); + u32 half = DIV_ROUND_CLOSEST(rate, 2); + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + } } +static int ks8695_set_next_event(unsigned long cycles, + struct clock_event_device *evt) + +{ + u32 half = DIV_ROUND_CLOSEST(cycles, 2); + u32 tmcon; + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + return 0; +} + +static struct clock_event_device clockevent_ks8695 = { + .name = "ks8695_t1tc", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = ks8695_set_next_event, + .set_mode = ks8695_set_mode, +}; + /* * IRQ handler for the timer. */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *evt = &clockevent_ks8695; + + evt->event_handler(evt); return IRQ_HANDLED; } @@ -83,18 +128,22 @@ static struct irqaction ks8695_timer_irq = { static void ks8695_timer_setup(void) { - unsigned long tmout = CLOCK_TICK_RATE / HZ; unsigned long tmcon; - /* disable timer1 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); - - __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC); - __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD); + /* Disable timer 0 and 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T0EN; + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - /* re-enable timer1 */ - __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); + /* + * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles + * (one on each counter) maximum 2*2^32, but the API will only + * accept up to a 32bit full word (0xFFFFFFFFU). + */ + clockevents_config_and_register(&clockevent_ks8695, + KS8695_CLOCK_RATE, 2, + 0xFFFFFFFFU); } static void __init ks8695_timer_init (void) @@ -107,8 +156,6 @@ static void __init ks8695_timer_init (void) struct sys_timer ks8695_timer = { .init = ks8695_timer_init, - .offset = ks8695_gettimeoffset, - .resume = ks8695_timer_setup, }; void ks8695_restart(char mode, const char *cmd) @@ -119,12 +166,12 @@ void ks8695_restart(char mode, const char *cmd) soft_restart(0); /* disable timer0 */ - reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); /* enable watchdog mode */ - __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); + writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); /* re-enable timer0 */ - __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); } diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b786f7e6cd1..095c155d6fb 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,13 +2,19 @@ # Makefile for Marvell's PXA168 processors line # -obj-y += common.o clock.o devices.o time.o irq.o +obj-y += common.o devices.o time.o irq.o # SoC support obj-$(CONFIG_CPU_PXA168) += pxa168.o obj-$(CONFIG_CPU_PXA910) += pxa910.o obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o +ifeq ($(CONFIG_COMMON_CLK), ) +obj-y += clock.o +obj-$(CONFIG_CPU_PXA168) += clock-pxa168.o +obj-$(CONFIG_CPU_PXA910) += clock-pxa910.o +obj-$(CONFIG_CPU_MMP2) += clock-mmp2.o +endif ifeq ($(CONFIG_PM),y) obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c new file mode 100644 index 00000000000..21d22002cd1 --- /dev/null +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -0,0 +1,111 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB Clock register offsets for MMP2 + */ +#define APBC_RTC APBC_REG(0x000) +#define APBC_TWSI1 APBC_REG(0x004) +#define APBC_TWSI2 APBC_REG(0x008) +#define APBC_TWSI3 APBC_REG(0x00c) +#define APBC_TWSI4 APBC_REG(0x010) +#define APBC_KPC APBC_REG(0x018) +#define APBC_UART1 APBC_REG(0x02c) +#define APBC_UART2 APBC_REG(0x030) +#define APBC_UART3 APBC_REG(0x034) +#define APBC_GPIO APBC_REG(0x038) +#define APBC_PWM0 APBC_REG(0x03c) +#define APBC_PWM1 APBC_REG(0x040) +#define APBC_PWM2 APBC_REG(0x044) +#define APBC_PWM3 APBC_REG(0x048) +#define APBC_SSP0 APBC_REG(0x04c) +#define APBC_SSP1 APBC_REG(0x050) +#define APBC_SSP2 APBC_REG(0x054) +#define APBC_SSP3 APBC_REG(0x058) +#define APBC_SSP4 APBC_REG(0x05c) +#define APBC_SSP5 APBC_REG(0x060) +#define APBC_TWSI5 APBC_REG(0x07c) +#define APBC_TWSI6 APBC_REG(0x080) +#define APBC_UART4 APBC_REG(0x088) + +#define APMU_USB APMU_REG(0x05c) +#define APMU_NAND APMU_REG(0x060) +#define APMU_SDH0 APMU_REG(0x054) +#define APMU_SDH1 APMU_REG(0x058) +#define APMU_SDH2 APMU_REG(0x0e8) +#define APMU_SDH3 APMU_REG(0x0ec) + +static void sdhc_clk_enable(struct clk *clk) +{ + uint32_t clk_rst; + + clk_rst = __raw_readl(clk->clk_rst); + clk_rst |= clk->enable_val; + __raw_writel(clk_rst, clk->clk_rst); +} + +static void sdhc_clk_disable(struct clk *clk) +{ + uint32_t clk_rst; + + clk_rst = __raw_readl(clk->clk_rst); + clk_rst &= ~clk->enable_val; + __raw_writel(clk_rst, clk->clk_rst); +} + +struct clkops sdhc_clk_ops = { + .enable = sdhc_clk_enable, + .disable = sdhc_clk_disable, +}; + +/* APB peripheral clocks */ +static APBC_CLK(uart1, UART1, 1, 26000000); +static APBC_CLK(uart2, UART2, 1, 26000000); +static APBC_CLK(uart3, UART3, 1, 26000000); +static APBC_CLK(uart4, UART4, 1, 26000000); +static APBC_CLK(twsi1, TWSI1, 0, 26000000); +static APBC_CLK(twsi2, TWSI2, 0, 26000000); +static APBC_CLK(twsi3, TWSI3, 0, 26000000); +static APBC_CLK(twsi4, TWSI4, 0, 26000000); +static APBC_CLK(twsi5, TWSI5, 0, 26000000); +static APBC_CLK(twsi6, TWSI6, 0, 26000000); +static APBC_CLK(gpio, GPIO, 0, 26000000); + +static APMU_CLK(nand, NAND, 0xbf, 100000000); +static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops); + +static struct clk_lookup mmp2_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL), + INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL), + INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), + INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), +}; + +void __init mmp2_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); +} diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c new file mode 100644 index 00000000000..5e6c18ccebd --- /dev/null +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -0,0 +1,91 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB clock register offsets for PXA168 + */ +#define APBC_UART1 APBC_REG(0x000) +#define APBC_UART2 APBC_REG(0x004) +#define APBC_GPIO APBC_REG(0x008) +#define APBC_PWM1 APBC_REG(0x00c) +#define APBC_PWM2 APBC_REG(0x010) +#define APBC_PWM3 APBC_REG(0x014) +#define APBC_PWM4 APBC_REG(0x018) +#define APBC_RTC APBC_REG(0x028) +#define APBC_TWSI0 APBC_REG(0x02c) +#define APBC_KPC APBC_REG(0x030) +#define APBC_TWSI1 APBC_REG(0x06c) +#define APBC_UART3 APBC_REG(0x070) +#define APBC_SSP1 APBC_REG(0x81c) +#define APBC_SSP2 APBC_REG(0x820) +#define APBC_SSP3 APBC_REG(0x84c) +#define APBC_SSP4 APBC_REG(0x858) +#define APBC_SSP5 APBC_REG(0x85c) + +#define APMU_NAND APMU_REG(0x060) +#define APMU_LCD APMU_REG(0x04c) +#define APMU_ETH APMU_REG(0x0fc) +#define APMU_USB APMU_REG(0x05c) + +/* APB peripheral clocks */ +static APBC_CLK(uart1, UART1, 1, 14745600); +static APBC_CLK(uart2, UART2, 1, 14745600); +static APBC_CLK(uart3, UART3, 1, 14745600); +static APBC_CLK(twsi0, TWSI0, 1, 33000000); +static APBC_CLK(twsi1, TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PWM1, 1, 13000000); +static APBC_CLK(pwm2, PWM2, 1, 13000000); +static APBC_CLK(pwm3, PWM3, 1, 13000000); +static APBC_CLK(pwm4, PWM4, 1, 13000000); +static APBC_CLK(ssp1, SSP1, 4, 0); +static APBC_CLK(ssp2, SSP2, 4, 0); +static APBC_CLK(ssp3, SSP3, 4, 0); +static APBC_CLK(ssp4, SSP4, 4, 0); +static APBC_CLK(ssp5, SSP5, 4, 0); +static APBC_CLK(gpio, GPIO, 0, 13000000); +static APBC_CLK(keypad, KPC, 0, 32000); +static APBC_CLK(rtc, RTC, 8, 32768); + +static APMU_CLK(nand, NAND, 0x19b, 156000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000); +static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); + +/* device and clock bindings */ +static struct clk_lookup pxa168_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), + INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), +}; + +void __init pxa168_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); +} diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c new file mode 100644 index 00000000000..933ea71d0b5 --- /dev/null +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -0,0 +1,67 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB Clock register offsets for PXA910 + */ +#define APBC_UART0 APBC_REG(0x000) +#define APBC_UART1 APBC_REG(0x004) +#define APBC_GPIO APBC_REG(0x008) +#define APBC_PWM1 APBC_REG(0x00c) +#define APBC_PWM2 APBC_REG(0x010) +#define APBC_PWM3 APBC_REG(0x014) +#define APBC_PWM4 APBC_REG(0x018) +#define APBC_SSP1 APBC_REG(0x01c) +#define APBC_SSP2 APBC_REG(0x020) +#define APBC_RTC APBC_REG(0x028) +#define APBC_TWSI0 APBC_REG(0x02c) +#define APBC_KPC APBC_REG(0x030) +#define APBC_SSP3 APBC_REG(0x04c) +#define APBC_TWSI1 APBC_REG(0x06c) + +#define APMU_NAND APMU_REG(0x060) +#define APMU_USB APMU_REG(0x05c) + +static APBC_CLK(uart1, UART0, 1, 14745600); +static APBC_CLK(uart2, UART1, 1, 14745600); +static APBC_CLK(twsi0, TWSI0, 1, 33000000); +static APBC_CLK(twsi1, TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PWM1, 1, 13000000); +static APBC_CLK(pwm2, PWM2, 1, 13000000); +static APBC_CLK(pwm3, PWM3, 1, 13000000); +static APBC_CLK(pwm4, PWM4, 1, 13000000); +static APBC_CLK(gpio, GPIO, 0, 13000000); +static APBC_CLK(rtc, RTC, 8, 32768); + +static APMU_CLK(nand, NAND, 0x19b, 156000000); +static APMU_CLK(u2o, USB, 0x1b, 480000000); + +/* device and clock bindings */ +static struct clk_lookup pxa910_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), +}; + +void __init pxa910_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); +} diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index 1c9d6c1ea97..bd453274fca 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -7,3 +7,6 @@ extern void timer_init(int irq); extern void __init icu_init_irq(void); extern void __init mmp_map_io(void); extern void mmp_restart(char, const char *); +extern void __init pxa168_clk_init(void); +extern void __init pxa910_clk_init(void); +extern void __init mmp2_clk_init(void); diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 68b0c93ec6a..ddc812f4034 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -13,101 +13,6 @@ #include <mach/addr-map.h> -/* - * APB clock register offsets for PXA168 - */ -#define APBC_PXA168_UART1 APBC_REG(0x000) -#define APBC_PXA168_UART2 APBC_REG(0x004) -#define APBC_PXA168_GPIO APBC_REG(0x008) -#define APBC_PXA168_PWM1 APBC_REG(0x00c) -#define APBC_PXA168_PWM2 APBC_REG(0x010) -#define APBC_PXA168_PWM3 APBC_REG(0x014) -#define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_RTC APBC_REG(0x028) -#define APBC_PXA168_TWSI0 APBC_REG(0x02c) -#define APBC_PXA168_KPC APBC_REG(0x030) -#define APBC_PXA168_TIMERS APBC_REG(0x034) -#define APBC_PXA168_AIB APBC_REG(0x03c) -#define APBC_PXA168_SW_JTAG APBC_REG(0x040) -#define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_ASFAR APBC_REG(0x050) -#define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_TWSI1 APBC_REG(0x06c) -#define APBC_PXA168_UART3 APBC_REG(0x070) -#define APBC_PXA168_AC97 APBC_REG(0x084) -#define APBC_PXA168_SSP1 APBC_REG(0x81c) -#define APBC_PXA168_SSP2 APBC_REG(0x820) -#define APBC_PXA168_SSP3 APBC_REG(0x84c) -#define APBC_PXA168_SSP4 APBC_REG(0x858) -#define APBC_PXA168_SSP5 APBC_REG(0x85c) - -/* - * APB Clock register offsets for PXA910 - */ -#define APBC_PXA910_UART0 APBC_REG(0x000) -#define APBC_PXA910_UART1 APBC_REG(0x004) -#define APBC_PXA910_GPIO APBC_REG(0x008) -#define APBC_PXA910_PWM1 APBC_REG(0x00c) -#define APBC_PXA910_PWM2 APBC_REG(0x010) -#define APBC_PXA910_PWM3 APBC_REG(0x014) -#define APBC_PXA910_PWM4 APBC_REG(0x018) -#define APBC_PXA910_SSP1 APBC_REG(0x01c) -#define APBC_PXA910_SSP2 APBC_REG(0x020) -#define APBC_PXA910_IPC APBC_REG(0x024) -#define APBC_PXA910_RTC APBC_REG(0x028) -#define APBC_PXA910_TWSI0 APBC_REG(0x02c) -#define APBC_PXA910_KPC APBC_REG(0x030) -#define APBC_PXA910_TIMERS APBC_REG(0x034) -#define APBC_PXA910_TBROT APBC_REG(0x038) -#define APBC_PXA910_AIB APBC_REG(0x03c) -#define APBC_PXA910_SW_JTAG APBC_REG(0x040) -#define APBC_PXA910_TIMERS1 APBC_REG(0x044) -#define APBC_PXA910_ONEWIRE APBC_REG(0x048) -#define APBC_PXA910_SSP3 APBC_REG(0x04c) -#define APBC_PXA910_ASFAR APBC_REG(0x050) -#define APBC_PXA910_ASSAR APBC_REG(0x054) - -/* - * APB Clock register offsets for MMP2 - */ -#define APBC_MMP2_RTC APBC_REG(0x000) -#define APBC_MMP2_TWSI1 APBC_REG(0x004) -#define APBC_MMP2_TWSI2 APBC_REG(0x008) -#define APBC_MMP2_TWSI3 APBC_REG(0x00c) -#define APBC_MMP2_TWSI4 APBC_REG(0x010) -#define APBC_MMP2_ONEWIRE APBC_REG(0x014) -#define APBC_MMP2_KPC APBC_REG(0x018) -#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c) -#define APBC_MMP2_SW_JTAG APBC_REG(0x020) -#define APBC_MMP2_TIMERS APBC_REG(0x024) -#define APBC_MMP2_UART1 APBC_REG(0x02c) -#define APBC_MMP2_UART2 APBC_REG(0x030) -#define APBC_MMP2_UART3 APBC_REG(0x034) -#define APBC_MMP2_GPIO APBC_REG(0x038) -#define APBC_MMP2_PWM0 APBC_REG(0x03c) -#define APBC_MMP2_PWM1 APBC_REG(0x040) -#define APBC_MMP2_PWM2 APBC_REG(0x044) -#define APBC_MMP2_PWM3 APBC_REG(0x048) -#define APBC_MMP2_SSP0 APBC_REG(0x04c) -#define APBC_MMP2_SSP1 APBC_REG(0x050) -#define APBC_MMP2_SSP2 APBC_REG(0x054) -#define APBC_MMP2_SSP3 APBC_REG(0x058) -#define APBC_MMP2_SSP4 APBC_REG(0x05c) -#define APBC_MMP2_SSP5 APBC_REG(0x060) -#define APBC_MMP2_AIB APBC_REG(0x064) -#define APBC_MMP2_ASFAR APBC_REG(0x068) -#define APBC_MMP2_ASSAR APBC_REG(0x06c) -#define APBC_MMP2_USIM APBC_REG(0x070) -#define APBC_MMP2_MPMU APBC_REG(0x074) -#define APBC_MMP2_IPC APBC_REG(0x078) -#define APBC_MMP2_TWSI5 APBC_REG(0x07c) -#define APBC_MMP2_TWSI6 APBC_REG(0x080) -#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084) -#define APBC_MMP2_UART4 APBC_REG(0x088) -#define APBC_MMP2_RIPC APBC_REG(0x08c) -#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */ -#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4) - /* Common APB clock register bit definitions */ #define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ #define APBC_FNCLK (1 << 1) /* Functional Clock Enable */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h index 7af8deb63e8..93c8d0e29bb 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -13,21 +13,6 @@ #include <mach/addr-map.h> -/* Clock Reset Control */ -#define APMU_IRE APMU_REG(0x048) -#define APMU_LCD APMU_REG(0x04c) -#define APMU_CCIC APMU_REG(0x050) -#define APMU_SDH0 APMU_REG(0x054) -#define APMU_SDH1 APMU_REG(0x058) -#define APMU_USB APMU_REG(0x05c) -#define APMU_NAND APMU_REG(0x060) -#define APMU_DMA APMU_REG(0x064) -#define APMU_GEU APMU_REG(0x068) -#define APMU_BUS APMU_REG(0x06c) -#define APMU_SDH2 APMU_REG(0x0e8) -#define APMU_SDH3 APMU_REG(0x0ec) -#define APMU_ETH APMU_REG(0x0fc) - #define APMU_FNCLK_EN (1 << 4) #define APMU_AXICLK_EN (1 << 3) #define APMU_FNRST_DIS (1 << 1) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index c709a24a9d2..c2ce3d05b04 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -20,7 +20,6 @@ #include <asm/mach/time.h> #include <mach/addr-map.h> #include <mach/regs-apbc.h> -#include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> #include <mach/dma.h> @@ -29,7 +28,6 @@ #include <mach/mmp2.h> #include "common.h" -#include "clock.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -98,67 +96,6 @@ void __init mmp2_init_irq(void) mmp2_init_icu(); } -static void sdhc_clk_enable(struct clk *clk) -{ - uint32_t clk_rst; - - clk_rst = __raw_readl(clk->clk_rst); - clk_rst |= clk->enable_val; - __raw_writel(clk_rst, clk->clk_rst); -} - -static void sdhc_clk_disable(struct clk *clk) -{ - uint32_t clk_rst; - - clk_rst = __raw_readl(clk->clk_rst); - clk_rst &= ~clk->enable_val; - __raw_writel(clk_rst, clk->clk_rst); -} - -struct clkops sdhc_clk_ops = { - .enable = sdhc_clk_enable, - .disable = sdhc_clk_disable, -}; - -/* APB peripheral clocks */ -static APBC_CLK(uart1, MMP2_UART1, 1, 26000000); -static APBC_CLK(uart2, MMP2_UART2, 1, 26000000); -static APBC_CLK(uart3, MMP2_UART3, 1, 26000000); -static APBC_CLK(uart4, MMP2_UART4, 1, 26000000); -static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000); -static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000); -static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); -static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); -static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); -static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000); - -static APMU_CLK(nand, NAND, 0xbf, 100000000); -static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops); - -static struct clk_lookup mmp2_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL), - INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL), - INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), - INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), -}; - static int __init mmp2_init(void) { if (cpu_is_mmp2()) { @@ -168,25 +105,27 @@ static int __init mmp2_init(void) mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); - clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); + mmp2_clk_init(); } return 0; } postcore_initcall(mmp2_init); +#define APBC_TIMERS APBC_REG(0x024) + static void __init mmp2_timer_init(void) { unsigned long clk_rst; - __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); /* * enable bus/functional clock, enable 6.5MHz (divider 4), * release reset */ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); - __raw_writel(clk_rst, APBC_MMP2_TIMERS); + __raw_writel(clk_rst, APBC_TIMERS); timer_init(IRQ_MMP2_TIMER1); } diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 62d787c3447..b7f074f1549 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -18,8 +18,8 @@ #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/addr-map.h> #include <mach/cputype.h> +#include <mach/addr-map.h> #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> @@ -50,62 +50,13 @@ void __init pxa168_init_irq(void) icu_init_irq(); } -/* APB peripheral clocks */ -static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); -static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); -static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); -static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); -static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); -static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); -static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); -static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); -static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); -static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); -static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); -static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); -static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); -static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); -static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); -static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APBC_CLK(rtc, PXA168_RTC, 8, 32768); - -static APMU_CLK(nand, NAND, 0x19b, 156000000); -static APMU_CLK(lcd, LCD, 0x7f, 312000000); -static APMU_CLK(eth, ETH, 0x09, 0); -static APMU_CLK(usb, USB, 0x12, 0); - -/* device and clock bindings */ -static struct clk_lookup pxa168_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), - INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), - INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), - INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), - INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), - INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), - INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), - INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), - INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), - INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), - INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), -}; - static int __init pxa168_init(void) { if (cpu_is_pxa168()) { mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa168_mfp_addr_map); pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); - clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); + pxa168_clk_init(); } return 0; @@ -114,6 +65,7 @@ postcore_initcall(pxa168_init); /* system timer - clock enabled, 3.25MHz */ #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) +#define APBC_TIMERS APBC_REG(0x34) static void __init pxa168_timer_init(void) { @@ -121,10 +73,10 @@ static void __init pxa168_timer_init(void) * ourselves instead of using clk_* API. Clock rate is defined * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); /* 3.25MHz, bus/functional clock enabled, release reset */ - __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_TIMERS); timer_init(IRQ_PXA168_TIMER1); } diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 6da52e9f2bd..7d84521bb71 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -17,7 +17,6 @@ #include <asm/mach/time.h> #include <mach/addr-map.h> #include <mach/regs-apbc.h> -#include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> #include <mach/dma.h> @@ -25,7 +24,6 @@ #include <mach/devices.h> #include "common.h" -#include "clock.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -82,44 +80,13 @@ void __init pxa910_init_irq(void) icu_init_irq(); } -/* APB peripheral clocks */ -static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); -static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); -static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); -static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); -static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); -static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); -static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); -static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000); -static APBC_CLK(rtc, PXA910_RTC, 8, 32768); - -static APMU_CLK(nand, NAND, 0x19b, 156000000); -static APMU_CLK(u2o, USB, 0x1b, 480000000); - -/* device and clock bindings */ -static struct clk_lookup pxa910_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), - INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), - INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), - INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), - INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), -}; - static int __init pxa910_init(void) { if (cpu_is_pxa910()) { mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa910_mfp_addr_map); pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); - clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); + pxa910_clk_init(); } return 0; @@ -128,12 +95,13 @@ postcore_initcall(pxa910_init); /* system timer - clock enabled, 3.25MHz */ #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) +#define APBC_TIMERS APBC_REG(0x34) static void __init pxa910_timer_init(void) { /* reset and configure */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS); - __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_TIMERS); timer_init(IRQ_PXA910_AP1_TIMER1); } diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4ad3969b988..6a6c197212e 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,11 +1,11 @@ -obj-y += io.o idle.o timer.o +obj-y += io.o timer.o obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c deleted file mode 100644 index 805d4ee53f7..00000000000 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ /dev/null @@ -1,525 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.c - * - * MSM architecture clock driver - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include "proc_comm.h" -#include "acpuclock.h" - - -#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) -#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) -#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) - -/* - * ARM11 clock configuration for specific ACPU speeds - */ - -#define ACPU_PLL_TCXO -1 -#define ACPU_PLL_0 0 -#define ACPU_PLL_1 1 -#define ACPU_PLL_2 2 -#define ACPU_PLL_3 3 - -#define PERF_SWITCH_DEBUG 0 -#define PERF_SWITCH_STEP_DEBUG 0 - -struct clock_state -{ - struct clkctl_acpu_speed *current_speed; - struct mutex lock; - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - -static struct clk *ebi1_clk; -static struct clock_state drv_state = { 0 }; - -static void __init acpuclk_init(void); - -/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ -enum { - VDD_0 = 0, - VDD_1 = 1, - VDD_2 = 2, - VDD_3 = 3, - VDD_4 = 3, - VDD_5 = 3, - VDD_6 = 3, - VDD_7 = 7, - VDD_END -}; - -struct clkctl_acpu_speed { - unsigned int a11clk_khz; - int pll; - unsigned int a11clk_src_sel; - unsigned int a11clk_src_div; - unsigned int ahbclk_khz; - unsigned int ahbclk_div; - int vdd; - unsigned int axiclk_khz; - unsigned long lpj; /* loops_per_jiffy */ -/* Index in acpu_freq_tbl[] for steppings. */ - short down; - short up; -}; - -/* - * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initialize loops_per_jiffy to 0. - * - * Table stepping up/down is optimized for 256mhz jumps while staying on the - * same PLL. - */ -#if (0) -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, - { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, - { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, - { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, - { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, - { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, - { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#else /* Table of freq we currently use. */ -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#endif - - -#ifdef CONFIG_CPU_FREQ_TABLE -static struct cpufreq_frequency_table freq_table[] = { - { 0, 122880 }, - { 1, 128000 }, - { 2, 245760 }, - { 3, 384000 }, - { 4, 528000 }, - { 5, CPUFREQ_TABLE_END }, -}; -#endif - -static int pc_pll_request(unsigned id, unsigned on) -{ - int res; - on = !!on; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "Enabling PLL %d\n", id); - else - printk(KERN_DEBUG "Disabling PLL %d\n", id); -#endif - - res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); - if (res < 0) - return res; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "PLL %d enabled\n", id); - else - printk(KERN_DEBUG "PLL %d disabled\n", id); -#endif - return res; -} - - -/*---------------------------------------------------------------------------- - * ARM11 'owned' clock control - *---------------------------------------------------------------------------*/ - -unsigned long acpuclk_power_collapse(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.power_collapse_khz) - acpuclk_set_rate(drv_state.power_collapse_khz, 1); - return ret; -} - -unsigned long acpuclk_get_wfi_rate(void) -{ - return drv_state.wait_for_irq_khz; -} - -unsigned long acpuclk_wait_for_irq(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.wait_for_irq_khz) - acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); - return ret; -} - -static int acpuclk_set_vdd_level(int vdd) -{ - uint32_t current_vdd; - - current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", - current_vdd, vdd); -#endif - writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); - udelay(drv_state.vdd_switch_time_us); - if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { -#if PERF_SWITCH_DEBUG - printk(KERN_ERR "acpuclock: VDD set failed\n"); -#endif - return -EIO; - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: VDD switched\n"); -#endif - return 0; -} - -/* Set proper dividers for the given clock speed. */ -static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { - uint32_t reg_clkctl, reg_clksel, clk_div; - - /* AHB_CLK_DIV */ - clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; - /* - * If the new clock divider is higher than the previous, then - * program the divider before switching the clock - */ - if (hunt_s->ahbclk_div > clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { - /* SRC0 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 4); - reg_clkctl |= (hunt_s->a11clk_src_sel << 4); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~0xf; - reg_clkctl |= hunt_s->a11clk_src_div; - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } else { - /* SRC1 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 12); - reg_clkctl |= (hunt_s->a11clk_src_sel << 12); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0xf << 8); - reg_clkctl |= (hunt_s->a11clk_src_div << 8); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - - /* - * If the new clock divider is lower than the previous, then - * program the divider after switching the clock - */ - if (hunt_s->ahbclk_div < clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } -} - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse) -{ - uint32_t reg_clkctl; - struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; - int rc = 0; - unsigned int plls_enabled = 0, pll; - - strt_s = cur_s = drv_state.current_speed; - - WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); - if (cur_s == NULL) - return -ENOENT; - - if (rate == (cur_s->a11clk_khz * 1000)) - return 0; - - for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { - if (tgt_s->a11clk_khz == (rate / 1000)) - break; - } - - if (tgt_s->a11clk_khz == 0) - return -EINVAL; - - /* Choose the highest speed speed at or below 'rate' with same PLL. */ - if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { - while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) - tgt_s--; - } - - if (strt_s->pll != ACPU_PLL_TCXO) - plls_enabled |= 1 << strt_s->pll; - - if (!for_power_collapse) { - mutex_lock(&drv_state.lock); - if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { - rc = pc_pll_request(tgt_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - tgt_s->pll, rc); - goto out; - } - plls_enabled |= 1 << tgt_s->pll; - } - /* Increase VDD if needed. */ - if (tgt_s->vdd > cur_s->vdd) { - if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { - printk(KERN_ERR "Unable to switch ACPU vdd\n"); - goto out; - } - } - } - - /* Set wait states for CPU between frequency changes */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - -#if PERF_SWITCH_DEBUG - printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", - strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); -#endif - - while (cur_s != tgt_s) { - /* - * Always jump to target freq if within 256mhz, regulardless of - * PLL. If differnece is greater, use the predefinied - * steppings in the table. - */ - int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); - if (d > drv_state.max_speed_delta_khz) { - /* Step up or down depending on target vs current. */ - int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? - cur_s->up : cur_s->down; - if (clk_index < 0) { /* This should not happen. */ - printk(KERN_ERR "cur:%u target: %u\n", - cur_s->a11clk_khz, tgt_s->a11clk_khz); - rc = -EINVAL; - goto out; - } - cur_s = &acpu_freq_tbl[clk_index]; - } else { - cur_s = tgt_s; - } -#if PERF_SWITCH_STEP_DEBUG - printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", - __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); -#endif - if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO - && !(plls_enabled & (1 << cur_s->pll))) { - rc = pc_pll_request(cur_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - cur_s->pll, rc); - goto out; - } - plls_enabled |= 1 << cur_s->pll; - } - - acpuclk_set_div(cur_s); - drv_state.current_speed = cur_s; - /* Re-adjust lpj for the new clock speed. */ - loops_per_jiffy = cur_s->lpj; - udelay(drv_state.acpu_switch_time_us); - } - - /* Nothing else to do for power collapse. */ - if (for_power_collapse) - return 0; - - /* Disable PLLs we are not using anymore. */ - plls_enabled &= ~(1 << tgt_s->pll); - for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) - if (plls_enabled & (1 << pll)) { - rc = pc_pll_request(pll, 0); - if (rc < 0) { - pr_err("PLL%d disable failed (%d)\n", pll, rc); - goto out; - } - } - - /* Change the AXI bus frequency if we can. */ - if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { - rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - } - - /* Drop VDD level if we can. */ - if (tgt_s->vdd < strt_s->vdd) { - if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) - printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); -#endif -out: - if (!for_power_collapse) - mutex_unlock(&drv_state.lock); - return rc; -} - -static void __init acpuclk_init(void) -{ - struct clkctl_acpu_speed *speed; - uint32_t div, sel; - int rc; - - /* - * Determine the rate of ACPU clock - */ - - if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ - /* CLK_SRC0_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; - /* CLK_SRC0_DIV */ - div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; - } else { - /* CLK_SRC1_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; - /* CLK_SRC1_DIV */ - div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; - } - - for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { - if (speed->a11clk_src_sel == sel - && (speed->a11clk_src_div == div)) - break; - } - if (speed->a11clk_khz == 0) { - printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); - return; - } - - drv_state.current_speed = speed; - - rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - - printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); -} - -unsigned long acpuclk_get_rate(void) -{ - WARN_ONCE(drv_state.current_speed == NULL, - "acpuclk_get_rate: not initialized\n"); - if (drv_state.current_speed) - return drv_state.current_speed->a11clk_khz; - else - return 0; -} - -uint32_t acpuclk_get_switch_time(void) -{ - return drv_state.acpu_switch_time_us; -} - -/*---------------------------------------------------------------------------- - * Clock driver initialization - *---------------------------------------------------------------------------*/ - -/* Initialize the lpj field in the acpu_freq_tbl. */ -static void __init lpj_init(void) -{ - int i; - const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; - for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { - acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, - base_clk->a11clk_khz, - acpu_freq_tbl[i].a11clk_khz); - } -} - -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) -{ - pr_info("acpu_clock_init()\n"); - - ebi1_clk = clk_get(NULL, "ebi1_clk"); - - mutex_init(&drv_state.lock); - drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; - drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; - drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; - drv_state.power_collapse_khz = clkdata->power_collapse_khz; - drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; - acpuclk_init(); - lpj_init(); -#ifdef CONFIG_CPU_FREQ_TABLE - cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); -#endif -} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h deleted file mode 100644 index 415de2eb9a5..00000000000 --- a/arch/arm/mach-msm/acpuclock.h +++ /dev/null @@ -1,32 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.h - * - * MSM architecture clock driver header - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H -#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse); -unsigned long acpuclk_get_rate(void); -uint32_t acpuclk_get_switch_time(void); -unsigned long acpuclk_wait_for_irq(void); -unsigned long acpuclk_power_collapse(void); -unsigned long acpuclk_get_wfi_rate(void); - - -#endif - diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index cf1f89a5dc6..df00bc03ce7 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -30,7 +30,6 @@ #include <mach/board.h> #include <mach/hardware.h> -#include <mach/system.h> #include "board-mahimahi.h" #include "devices.h" diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c deleted file mode 100644 index 451ab1d43c9..00000000000 --- a/arch/arm/mach-msm/board-msm7x27.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/power_supply.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/setup.h> -#ifdef CONFIG_CACHE_L2X0 -#include <asm/hardware/cache-l2x0.h> -#endif - -#include <mach/vreg.h> -#include <mach/mpp.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "devices.h" -#include "socinfo.h" -#include "clock.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C0043ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(132), - .end = MSM_GPIO_TO_INT(132), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &smc91x_device, -}; - -extern struct sys_timer msm_timer; - -static void __init msm7x2x_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x2x_init(void) -{ - if (socinfo_init() < 0) - BUG(); - - if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) { - smc91x_resources[0].start = 0x98000300; - smc91x_resources[0].end = 0x980003ff; - smc91x_resources[1].start = MSM_GPIO_TO_INT(85); - smc91x_resources[1].end = MSM_GPIO_TO_INT(85); - if (gpio_tlmm_config(GPIO_CFG(85, 0, - GPIO_INPUT, - GPIO_PULL_DOWN, - GPIO_2MA), - GPIO_ENABLE)) { - printk(KERN_ERR - "%s: Err: Config GPIO-85 INT\n", - __func__); - } - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x2x_map_io(void) -{ - msm_map_common_io(); - /* Technically dependent on the SoC but using machine_is - * macros since socinfo is not available this early and there - * are plans to restructure the code which will eliminate the - * need for socinfo. - */ - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) - msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27); - - if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa()) - msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25); - -#ifdef CONFIG_CACHE_L2X0 - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) { - /* 7x27 has 256KB L2 cache: - 64Kb/Way and 4-Way Associativity; - R/W latency: 3 cycles; - evmon/parity/share disabled. */ - l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000); - } -#endif -} - -static void __init msm7x2x_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 2e569ab10ee..b7b0fc7e327 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/system.h> #include <mach/vreg.h> #include <mach/board.h> diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index 63b71131108..a52c970df15 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -25,7 +25,7 @@ /* * glue for the proc_comm interface */ -int pc_clk_enable(unsigned id) +static int pc_clk_enable(unsigned id) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); if (rc < 0) @@ -34,7 +34,7 @@ int pc_clk_enable(unsigned id) return (int)id < 0 ? -EINVAL : 0; } -void pc_clk_disable(unsigned id) +static void pc_clk_disable(unsigned id) { msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); } @@ -54,7 +54,7 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_rate(unsigned id, unsigned rate) +static int pc_clk_set_rate(unsigned id, unsigned rate) { /* The rate _might_ be rounded off to the nearest KHz value by the * remote function. So a return value of 0 doesn't necessarily mean @@ -67,7 +67,7 @@ int pc_clk_set_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_min_rate(unsigned id, unsigned rate) +static int pc_clk_set_min_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); if (rc < 0) @@ -76,7 +76,7 @@ int pc_clk_set_min_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_max_rate(unsigned id, unsigned rate) +static int pc_clk_set_max_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); if (rc < 0) @@ -85,7 +85,7 @@ int pc_clk_set_max_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_flags(unsigned id, unsigned flags) +static int pc_clk_set_flags(unsigned id, unsigned flags) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); if (rc < 0) @@ -94,7 +94,7 @@ int pc_clk_set_flags(unsigned id, unsigned flags) return (int)id < 0 ? -EINVAL : 0; } -unsigned pc_clk_get_rate(unsigned id) +static unsigned pc_clk_get_rate(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) return 0; @@ -102,7 +102,7 @@ unsigned pc_clk_get_rate(unsigned id) return id; } -unsigned pc_clk_is_enabled(unsigned id) +static unsigned pc_clk_is_enabled(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) return 0; @@ -110,7 +110,7 @@ unsigned pc_clk_is_enabled(unsigned id) return id; } -long pc_clk_round_rate(unsigned id, unsigned rate) +static long pc_clk_round_rate(unsigned id, unsigned rate) { /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 02cae5e2951..354b91d4c3a 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -223,8 +223,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_del(&cmd->list); - list_add_tail(&cmd->list, &active_commands[id]); + list_move_tail(&cmd->list, &active_commands[id]); if (cmd->execute_func) cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c deleted file mode 100644 index 0c9e13c6574..00000000000 --- a/arch/arm/mach-msm/idle.c +++ /dev/null @@ -1,49 +0,0 @@ -/* arch/arm/mach-msm/idle.c - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <asm/system.h> - -static void msm_idle(void) -{ -#ifdef CONFIG_MSM7X00A_IDLE - asm volatile ( - - "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" - "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" - "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" - "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" - - "mov r0, #0 /* prepare wfi value */ \n\t" - "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" - "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" - "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" - - "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" - - : : : "r0","r1" ); -#endif -} - -static int __init msm_idle_init(void) -{ - arm_pm_idle = msm_idle; - return 0; -} - -arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8edfafd..5a0811a4c85 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -22,15 +22,6 @@ /* platform device data structures */ -struct msm_acpu_clock_platform_data -{ - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - struct clk_lookup; extern struct sys_timer msm_timer; @@ -42,7 +33,6 @@ void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, unsigned int stat_irq, unsigned long stat_irq_flags); diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h deleted file mode 100644 index f5fb2ec87ff..00000000000 --- a/arch/arm/mach-msm/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-msm/include/mach/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* low level hardware reset hook -- for example, hitting the - * PSHOLD line on the PMIC to hard reset the system - */ -extern void (*msm_hw_reset_hook)(void); diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b116885..97042331cfc 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -38,8 +38,7 @@ #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ - || defined(CONFIG_ARCH_MSM7X25) +#if defined(CONFIG_ARCH_MSM7X00A) static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 9980dc736e7..8f1eecd8818 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <mach/msm_iomap.h> -#include <mach/system.h> #include "proc_comm.h" diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c index 657be73297d..84183ed2ef7 100644 --- a/arch/arm/mach-msm/smd.c +++ b/arch/arm/mach-msm/smd.c @@ -30,7 +30,6 @@ #include <linux/delay.h> #include <mach/msm_smd.h> -#include <mach/system.h> #include "smd_private.h" #include "proc_comm.h" @@ -39,8 +38,6 @@ #define CONFIG_QDSP6 1 #endif -void (*msm_hw_reset_hook)(void); - #define MODULE_NAME "msm_smd" enum { @@ -101,10 +98,6 @@ static void handle_modem_crash(void) pr_err("ARM9 has CRASHED\n"); smd_diag(); - /* hard reboot if possible */ - if (msm_hw_reset_hook) - msm_hw_reset_hook(); - /* in this case the modem or watchdog should reboot us */ for (;;) ; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 81280825493..004f93515a4 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -101,7 +101,7 @@ static struct clock_event_device msm_clockevent = { static union { struct clock_event_device *evt; - struct clock_event_device __percpu **percpu_evt; + struct clock_event_device * __percpu *percpu_evt; } msm_evt; static void __iomem *source_base; diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index a9bc84180d2..137e479d15a 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -13,6 +13,7 @@ #include <linux/mbus.h> #include <linux/io.h> #include <plat/addr-map.h> +#include <mach/mv78xx0.h> #include "common.h" /* @@ -81,7 +82,7 @@ void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min) { orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1); + TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0); } void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 3057f7d4329..6b0c3873552 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -135,11 +135,6 @@ static struct map_desc mv78xx0_io_desc[] __initdata = { .length = MV78XX0_CORE_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0), - .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)), - .length = MV78XX0_PCIE_IO_SIZE * 8, - .type = MT_DEVICE, - }, { .virtual = MV78XX0_REGS_VIRT_BASE, .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), .length = MV78XX0_REGS_SIZE, diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h deleted file mode 100644 index c7d9d00d8fc..00000000000 --- a/arch/arm/mach-mv78xx0/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "mv78xx0.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) - + MV78XX0_PCIE_IO_VIRT_BASE(0)); -} - -#define __io(a) __io(a) - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index e807c4c52a0..bd03fed1128 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -29,15 +29,15 @@ * * virt phys size * fe400000 f102x000 16K core-specific peripheral registers - * fe700000 f0800000 1M PCIe #0 I/O space - * fe800000 f0900000 1M PCIe #1 I/O space - * fe900000 f0a00000 1M PCIe #2 I/O space - * fea00000 f0b00000 1M PCIe #3 I/O space - * feb00000 f0c00000 1M PCIe #4 I/O space - * fec00000 f0d00000 1M PCIe #5 I/O space - * fed00000 f0e00000 1M PCIe #6 I/O space - * fee00000 f0f00000 1M PCIe #7 I/O space - * fef00000 f1000000 1M on-chip peripheral registers + * fee00000 f0800000 64K PCIe #0 I/O space + * fee10000 f0900000 64K PCIe #1 I/O space + * fee20000 f0a00000 64K PCIe #2 I/O space + * fee30000 f0b00000 64K PCIe #3 I/O space + * fee40000 f0c00000 64K PCIe #4 I/O space + * fee50000 f0d00000 64K PCIe #5 I/O space + * fee60000 f0e00000 64K PCIe #6 I/O space + * fee70000 f0f00000 64K PCIe #7 I/O space + * fd000000 f1000000 1M on-chip peripheral registers */ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 @@ -46,11 +46,10 @@ #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) #define MV78XX0_PCIE_IO_SIZE SZ_1M #define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfef00000 +#define MV78XX0_REGS_VIRT_BASE 0xfd000000 #define MV78XX0_REGS_SIZE SZ_1M #define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 2e56e86b6d6..26a059b4f47 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -15,6 +15,7 @@ #include <asm/mach/pci.h> #include <plat/pcie.h> #include <plat/addr-map.h> +#include <mach/mv78xx0.h> #include "common.h" struct pcie_port { @@ -23,16 +24,13 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char io_space_name[16]; char mem_space_name[16]; - struct resource res[2]; + struct resource res; }; static struct pcie_port pcie_port[8]; static int num_pcie_ports; static struct resource pcie_io_space; -static struct resource pcie_mem_space; - void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) { @@ -40,102 +38,59 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); } +u32 pcie_port_size[8] = { + 0, + 0x30000000, + 0x10000000, + 0x10000000, + 0x08000000, + 0x08000000, + 0x08000000, + 0x04000000, +}; + static void __init mv78xx0_pcie_preinit(void) { int i; u32 size_each; u32 start; - int win; + int win = 0; pcie_io_space.name = "PCIe I/O Space"; pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); pcie_io_space.end = MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1; - pcie_io_space.flags = IORESOURCE_IO; + pcie_io_space.flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pcie_io_space)) panic("can't allocate PCIe I/O space"); - pcie_mem_space.name = "PCIe MEM Space"; - pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE; - pcie_mem_space.end = - MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1; - pcie_mem_space.flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pcie_mem_space)) - panic("can't allocate PCIe MEM space"); + if (num_pcie_ports > 7) + panic("invalid number of PCIe ports"); + + size_each = pcie_port_size[num_pcie_ports]; + start = MV78XX0_PCIE_MEM_PHYS_BASE; for (i = 0; i < num_pcie_ports; i++) { struct pcie_port *pp = pcie_port + i; - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d.%d I/O", pp->maj, pp->min); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i); - pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d.%d MEM", pp->maj, pp->min); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; - pp->res[1].flags = IORESOURCE_MEM; - } - - switch (num_pcie_ports) { - case 0: - size_each = 0; - break; - - case 1: - size_each = 0x30000000; - break; - - case 2 ... 3: - size_each = 0x10000000; - break; - - case 4 ... 6: - size_each = 0x08000000; - break; - - case 7: - size_each = 0x04000000; - break; - - default: - panic("invalid number of PCIe ports"); - } - - start = MV78XX0_PCIE_MEM_PHYS_BASE; - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; - - pp->res[1].start = start; - pp->res[1].end = start + size_each - 1; + pp->res.name = pp->mem_space_name; + pp->res.flags = IORESOURCE_MEM; + pp->res.start = start; + pp->res.end = start + size_each - 1; start += size_each; - } - - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; - if (request_resource(&pcie_io_space, &pp->res[0])) - panic("can't allocate PCIe I/O sub-space"); - - if (request_resource(&pcie_mem_space, &pp->res[1])) + if (request_resource(&iomem_resource, &pp->res)) panic("can't allocate PCIe MEM sub-space"); - } - win = 0; - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; + mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start, + resource_size(&pp->res), + pp->maj, pp->min); - mv78xx0_setup_pcie_io_win(win++, pp->res[0].start, - resource_size(&pp->res[0]), + mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K, pp->maj, pp->min); - - mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start, - resource_size(&pp->res[1]), - pp->maj, pp->min); } } @@ -156,8 +111,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_set_local_bus_nr(pp->base, sys->busnr); orion_pcie_setup(pp->base); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr)); + + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); return 1; } @@ -281,7 +237,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base) pp->root_bus_nr = -1; pp->base = (void __iomem *)base; spin_lock_init(&pp->conf_lock); - memset(pp->res, 0, sizeof(pp->res)); + memset(&pp->res, 0, sizeof(pp->res)); } else { printk("link down, ignoring\n"); } diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index a051cb8ae57..3d1e1c250a1 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -16,8 +16,9 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> +#include <mach/irqs.h> #include <mach/ams-delta-fiq.h> #include "iomap.h" diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 68e8e5654c0..f12a12af352 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -19,7 +19,7 @@ #include <linux/module.h> #include <linux/io.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <asm/fiq.h> diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c53469802c0..9518bf5996d 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -26,6 +26,7 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <media/soc_camera.h> @@ -34,10 +35,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board-ams-delta.h> -#include <plat/keypad.h> -#include <plat/mux.h> -#include <plat/board.h> +#include <mach/board-ams-delta.h> +#include <linux/platform_data/keypad-omap.h> +#include <mach/mux.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 6872f3fd400..4b6de70c47a 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -28,11 +28,10 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> -#include <plat/flash.h> +#include <mach/mux.h> +#include <mach/flash.h> #include <plat/fpga.h> -#include <plat/keypad.h> -#include <plat/board.h> +#include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 6ec385e2b98..4ec579fdd36 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -22,8 +22,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> -#include <plat/board.h> +#include <mach/mux.h> #include <mach/usb.h> @@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = { }; #endif -static struct omap_board_config_kernel generic_config[] __initdata = { -}; - static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX @@ -76,8 +72,6 @@ static void __init omap_generic_init(void) } #endif - omap_board_config = generic_config; - omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 44a4ab195fb..af283a2bc7c 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -31,17 +31,18 @@ #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> #include <linux/omapfb.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irda.h> -#include <plat/keypad.h> -#include <plat/flash.h> +#include <mach/irda.h> +#include <linux/platform_data/keypad-omap.h> +#include <mach/flash.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 86cb5a04a40..06d11b1ee9c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -31,6 +31,7 @@ #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> #include <linux/omapfb.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/setup.h> #include <asm/page.h> @@ -38,11 +39,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> -#include <plat/keypad.h> +#include <linux/platform_data/keypad-omap.h> #include <plat/dma.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index b3f6e943e66..87ab2086ef9 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -37,13 +37,12 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/omapfb.h> +#include <linux/platform_data/keypad-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/omap7xx.h> -#include <plat/board.h> -#include <plat/keypad.h> +#include <mach/omap7xx.h> #include <plat/mmc.h> #include <mach/irqs.h> @@ -476,8 +475,7 @@ static void __init htcherald_lcd_init(void) break; } if (!tries) - printk(KERN_WARNING "Timeout waiting for end of frame " - "-- LCD may not be available\n"); + pr_err("Timeout waiting for end of frame -- LCD may not be available\n"); /* turn off DMA */ reg = omap_readw(OMAP_DMA_LCD_CCR); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index f21c2966daa..db5f7d2976e 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -31,11 +31,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> -#include <plat/flash.h> +#include <mach/mux.h> +#include <mach/flash.h> #include <plat/fpga.h> #include <plat/tc.h> -#include <plat/keypad.h> +#include <linux/platform_data/keypad-omap.h> #include <plat/mmc.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 2c0ca8fc338..7d5c06d6a52 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -21,14 +21,14 @@ #include <linux/workqueue.h> #include <linux/delay.h> +#include <linux/platform_data/keypad-omap.h> +#include <linux/platform_data/lcd-mipid.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> -#include <plat/board.h> -#include <plat/keypad.h> -#include <plat/lcd_mipid.h> +#include <mach/mux.h> #include <plat/mmc.h> #include <plat/clock.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 8784705edb6..2f1f9b96757 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -39,13 +39,15 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c/tps65010.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/tc.h> #include <mach/hardware.h> @@ -302,7 +304,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = { #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <plat/keypad.h> +#include <linux/platform_data/keypad-omap.h> static struct at24_platform_data at24c04 = { .byte_len = SZ_4K / 8, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 26bcb9defcd..1c578d58923 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -28,18 +28,18 @@ #include <linux/interrupt.h> #include <linux/apm-emulation.h> #include <linux/omapfb.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> -#include <plat/board.h> -#include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/irda.h> +#include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 4d099446dfa..97158095083 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -27,19 +27,19 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/led.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> -#include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/irda.h> +#include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 355980321c2..e311032e7ee 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -30,18 +30,18 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/board.h> -#include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/irda.h> +#include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 703d55ecffe..198b05417bf 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -22,17 +22,16 @@ #include <linux/input.h> #include <linux/smc91x.h> #include <linux/omapfb.h> +#include <linux/platform_data/keypad-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> -#include <plat/flash.h> -#include <plat/keypad.h> -#include <plat/board.h> +#include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index b59f78850e6..5932d56e17b 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -17,7 +17,7 @@ #include <mach/hardware.h> #include <plat/mmc.h> -#include <plat/board-sx1.h> +#include <mach/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8c665bd16ac..13bf2cc5681 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -28,19 +28,18 @@ #include <linux/errno.h> #include <linux/export.h> #include <linux/omapfb.h> +#include <linux/platform_data/keypad-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/dma.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <plat/tc.h> -#include <plat/board.h> -#include <plat/keypad.h> -#include <plat/board-sx1.h> +#include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3497769eb35..ad75e3411d4 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -31,11 +31,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board-voiceblue.h> -#include <plat/flash.h> -#include <plat/mux.h> +#include <mach/board-voiceblue.h> +#include <mach/flash.h> +#include <mach/mux.h> #include <plat/tc.h> -#include <plat/board.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; -static struct omap_board_config_kernel voiceblue_config[] = { -}; - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -275,8 +271,6 @@ static void __init voiceblue_init(void) voiceblue_smc91x_resources[1].start = gpio_to_irq(8); voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index a9ee06b6cb4..638f4070fc7 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -587,8 +587,8 @@ void omap1_clk_disable_unused(struct clk *clk) /* Clocks in the DSP domain need api_ck. Just assume bootloader * has not enabled any DSP clocks */ if (clk->enable_reg == DSP_IDLECT2) { - printk(KERN_INFO "Skipping reset check for DSP domain " - "clock \"%s\"\n", clk->name); + pr_info("Skipping reset check for DSP domain clock \"%s\"\n", + clk->name); return; } diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c007d80dfb6..9b45f4b0ee2 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,7 +25,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> -#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <mach/hardware.h> @@ -776,11 +775,10 @@ static struct clk_functions omap1_clk_functions = { static void __init omap1_show_rates(void) { - pr_notice("Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); } u32 cpu_mask; @@ -788,7 +786,6 @@ u32 cpu_mask; int __init omap1_clk_init(void) { struct omap_clk *c; - const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ u32 reg; @@ -837,19 +834,13 @@ int __init omap1_clk_init(void) ck_dpll1_p = clk_get(NULL, "ck_dpll1"); ck_ref_p = clk_get(NULL, "ck_ref"); - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - if (cpu_is_omap7xx()) ck_ref.rate = 13000000; if (cpu_is_omap16xx() && crystal_type == 2) ck_ref.rate = 19200000; - pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " - "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), omap_readw(ARM_CKCTL)); /* We want to be in syncronous scalable mode */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index fa1fa4deb6a..0cc54dd553e 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -20,12 +20,11 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/board.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/mmc.h> -#include <plat/omap7xx.h> +#include <mach/omap7xx.h> #include <mach/camera.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 3ef7d52316b..29007fef84c 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -27,7 +27,8 @@ #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irqs.h> + +#include <mach/irqs.h> #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 @@ -330,8 +331,9 @@ static int __init omap1_system_dma_init(void) d->chan = kzalloc(sizeof(struct omap_dma_lch) * (d->lch_count), GFP_KERNEL); if (!d->chan) { - dev_err(&pdev->dev, "%s: Memory allocation failed" - "for d->chan!!!\n", __func__); + dev_err(&pdev->dev, + "%s: Memory allocation failed for d->chan!\n", + __func__); goto exit_release_d; } diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 401eb3c080c..73ae6169aa4 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -11,7 +11,7 @@ #include <linux/mtd/map.h> #include <plat/tc.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index ebef15e5e7b..98e6f39224a 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 2a48cd2e175..33f419236b1 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index acf12b73eac..958ce9acee9 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -17,6 +17,7 @@ */ #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 5446c991264..a0551a6d745 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -20,7 +20,7 @@ */ #include <plat/i2c.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> void __init omap1_i2c_mux_pins(int bus_id) diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 23eed0035ed..adb5e764965 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -14,8 +14,6 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H -#include <plat/irqs.h> - /* * Interrupt number used for passing control from FIQ to IRQ. * IRQ12, described as reserved, has been selected. diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h index ad6f865d1f1..ad6f865d1f1 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h index 355adbdaae3..355adbdaae3 100644 --- a/arch/arm/plat-omap/include/plat/board-sx1.h +++ b/arch/arm/mach-omap1/include/mach/board-sx1.h diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h index 27916b210f5..27916b210f5 100644 --- a/arch/arm/plat-omap/include/plat/board-voiceblue.h +++ b/arch/arm/mach-omap1/include/mach/board-voiceblue.h diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/mach-omap1/include/mach/flash.h index 0d88499b79e..0d88499b79e 100644 --- a/arch/arm/plat-omap/include/plat/flash.h +++ b/arch/arm/mach-omap1/include/mach/flash.h diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h index e737706a8fe..ebf86c0f4f4 100644 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap1/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 01e35fa106b..84248d250ad 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,11 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H +#include <asm/sizes.h> #ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <plat/cpu.h> + /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } +#endif /* ifndef __ASSEMBLER__ */ + +#include <plat/serial.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + #endif -#endif -#include <plat/hardware.h> +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include "omap7xx.h" +#include "omap1510.h" +#include "omap16xx.h" + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/mach-omap1/include/mach/irda.h index 40f60339d1c..40f60339d1c 100644 --- a/arch/arm/plat-omap/include/plat/irda.h +++ b/arch/arm/mach-omap1/include/mach/irda.h diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 9292fdc1cb0..729992d7d26 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,5 +1,268 @@ /* - * arch/arm/mach-omap1/include/mach/irqs.h + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. */ -#include <plat/irqs.h> +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +#define NR_IRQS OMAP_FPGA_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#include <mach/hardware.h> + +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/mach-omap1/include/mach/mux.h index 32394895920..32394895920 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/mach-omap1/include/mach/mux.h diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index d2400466813..8fe05d6137c 100644 --- a/arch/arm/plat-omap/include/plat/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap1510.h - * +/* * Hardware definitions for TI OMAP1510 processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h index e69e1d857b4..cd1c724869c 100644 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ b/arch/arm/mach-omap1/include/mach/omap16xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap16xx.h - * +/* * Hardware definitions for TI OMAP1610/5912/1710 processors. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h index 48e4757e1e3..63da994bc60 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/mach-omap1/include/mach/omap7xx.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-omap/include/mach/omap7xx.h - * +/* * Hardware definitions for TI OMAP7XX processor. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h deleted file mode 100644 index 80a371c06e5..00000000000 --- a/arch/arm/mach-omap1/include/mach/smp.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/smp.h - */ - -#include <plat/smp.h> diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6c95a59f0f1..6a5baab1f4c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -16,7 +16,7 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 5769c71815b..ed42628611b 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -113,8 +113,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resolution is not supported " - "in 1510 mode\n"); + pr_err("DMA virtual resolution is not supported in 1510 mode\n"); BUG(); } lcd_dma.vxres = vxres; @@ -437,8 +436,7 @@ static int __init omap_init_lcd_dma(void) r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL); if (r != 0) - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); + pr_err("unable to request IRQ for LCD DMA (error %d)\n", r); return r; } diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index f6b14a14a95..6f958aec945 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -14,6 +14,7 @@ #include <linux/kernel_stat.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> @@ -68,11 +69,13 @@ void h2p2_dbg_leds_event(led_event_t evt) gpio_set_value(GPIO_IDLE, 0); } - __raw_writew(~0, &fpga->leds); led_state &= ~LED_STATE_ENABLED; - if (evt == led_halted) { - iounmap(fpga); - fpga = NULL; + if (fpga) { + __raw_writew(~0, &fpga->leds); + if (evt == led_halted) { + iounmap(fpga); + fpga = NULL; + } } goto done; @@ -158,7 +161,7 @@ void h2p2_dbg_leds_event(led_event_t evt) /* * Actually burn the LEDs */ - if (led_state & LED_STATE_ENABLED) + if (led_state & LED_STATE_ENABLED && fpga) __raw_writew(~hw_led_state, &fpga->leds); done: diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index ae6dd93b8dd..4071479f710 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -6,11 +6,12 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index adf00975b9b..bdc2e7541ad 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -20,9 +20,9 @@ #include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> -#include <plat/mcbsp.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index e9cc52d4cb2..667ce5027f6 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -29,7 +29,7 @@ #include <mach/hardware.h> -#include <plat/mux.h> +#include <mach/mux.h> #ifdef CONFIG_OMAP_MUX @@ -451,6 +451,56 @@ static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) #endif } +static struct omap_mux_cfg *mux_cfg; + +int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg) +{ + if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0 + || !arch_mux_cfg->cfg_reg) { + printk(KERN_ERR "Invalid pin table\n"); + return -EINVAL; + } + + mux_cfg = arch_mux_cfg; + + return 0; +} + +/* + * Sets the Omap MUX and PULL_DWN registers based on the table + */ +int __init_or_module omap_cfg_reg(const unsigned long index) +{ + struct pin_config *reg; + + if (!cpu_class_is_omap1()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } + + if (mux_cfg == NULL) { + printk(KERN_ERR "Pin mux table not initialized\n"); + return -ENODEV; + } + + if (index >= mux_cfg->size) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, mux_cfg->size); + dump_stack(); + return -ENODEV; + } + + reg = &mux_cfg->pins[index]; + + if (!mux_cfg->cfg_reg) + return -ENODEV; + + return mux_cfg->cfg_reg(reg); +} +EXPORT_SYMBOL(omap_cfg_reg); + int __init omap1_mux_init(void) { if (cpu_is_omap7xx()) { @@ -468,4 +518,8 @@ int __init omap1_mux_init(void) return omap_mux_register(&arch_mux_cfg); } -#endif +#else +#define omap_mux_init() do {} while(0) +#define omap_cfg_reg(x) do {} while(0) +#endif /* CONFIG_OMAP_MUX */ + diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index b2560d32b3a..47ec1615548 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -53,7 +53,7 @@ #include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 6809c9e56c9..b9d6834af83 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,8 +22,7 @@ #include <asm/mach-types.h> -#include <plat/board.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 65f88176fba..84267edd942 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -26,7 +26,7 @@ #include <asm/irq.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 34c2c7f59f0..7706fdfd025 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,36 +4,30 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o -omap-2-3-common = irq.o -hwmod-common = omap_hwmod.o \ - omap_hwmod_common_data.o -clock-common = clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +# INTCPS IP block support - XXX should be moved to drivers/ +obj-$(CONFIG_ARCH_OMAP2) += irq.o +obj-$(CONFIG_ARCH_OMAP3) += irq.o +obj-$(CONFIG_SOC_AM33XX) += irq.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) -obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +# Secure monitor API support +obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o +obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o +obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o -obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o +obj-$(CONFIG_TWL4030_CORE) += omap_twl.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -omap-4-5-common = omap4-common.o omap-wakeupgen.o \ - sleep44xx.o -obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) -obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) +obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o +obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -58,6 +52,7 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # OPP table initialization ifeq ($(CONFIG_PM_OPP),y) @@ -68,15 +63,15 @@ endif # Power Management ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o +obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o -obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -88,92 +83,76 @@ endif endif ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o endif # PRCM -omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \ - prcm_mpu44xx.o prminst44xx.o \ - vc44xx_data.o vp44xx_data.o -obj-y += prm_common.o -obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-y += prcm.o prm_common.o +obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o -obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o +obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o +omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ + prcm_mpu44xx.o prminst44xx.o \ + vc44xx_data.o vp44xx_data.o \ + prm44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains -voltagedomain-common := voltage.o vc.o vp.o -obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) +obj-y += voltage.o vc.o vp.o obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) -obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o # OMAP powerdomain framework -powerdomain-common += powerdomain.o powerdomain-common.o -obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) +obj-y += powerdomain.o powerdomain-common.o obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o # PRCM clockdomain control -clockdomain-common += clockdomain.o -obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) +obj-y += clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o +obj-y += clock.o clock_common_data.o \ + clkt_dpll.o clkt_clksel.o +obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o +obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o -obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o +obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o -obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += $(clock-common) +obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) @@ -181,6 +160,7 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data +obj-y += omap_hwmod_common_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -229,10 +209,10 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca..06c19bb7bca 100644 --- a/arch/arm/plat-omap/include/plat/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 2c90ac68668..d0c54c573d3 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -19,7 +19,7 @@ #include <linux/davinci_emac.h> #include <asm/system.h> #include <plat/omap_device.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/am35xx.h index 95594495fcf..95594495fcf 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/am35xx.h diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9511584fdc4..95b384d54f8 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -33,11 +33,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = { }; static struct twl4030_gpio_platform_data sdp2430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, }; static struct twl4030_platform_data sdp2430_twldata = { @@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void) sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START, &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a98c688058a..96cd3693e1a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -24,14 +24,12 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/mmc/host.h> +#include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mcspi.h> -#include <plat/board.h> #include <plat/usb.h> #include "common.h" #include <plat/dma.h> @@ -39,7 +37,7 @@ #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include "board-flash.h" #include "mux.h" @@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct omap_board_config_kernel sdp3430_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data sdp3430_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(16) | BIT(17), .setup = sdp3430_twl_gpio_setup, @@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void) int gpio_pendown; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = sdp3430_config; - omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2dc9ba523c7..fc224ad8674 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -17,8 +17,7 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include <plat/usb.h> #include <mach/board-zoom.h> @@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; -static struct omap_board_config_kernel sdp_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_board_config = sdp_config; - omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ad8a7d94afc..e82098fbedd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -28,23 +28,22 @@ #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <plat/omap4-keypad.h> +#include "omap4-keypad.h" #include <video/omapdss.h> #include <video/omap-panel-nokia-dsi.h> #include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "control.h" @@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { @@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 92432c28673..318feadb1d6 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -21,12 +21,10 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -37,11 +35,6 @@ #define GPIO_USB_POWER 35 #define GPIO_USB_NRESET 38 - -/* Board initialization */ -static struct omap_board_config_kernel am3517_crane_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -67,9 +60,6 @@ static void __init am3517_crane_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = am3517_crane_config; - omap_board_config_size = ARRAY_SIZE(am3517_crane_config); - /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 18f601096ce..0d99c9110d0 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,14 +25,13 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> -#include <mach/hardware.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <video/omapdss.h> @@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) platform_device_register(&am3517_hecc_device); } -static struct omap_board_config_kernel am3517_evm_config[] __initdata = { -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = { static void __init am3517_evm_init(void) { - omap_board_config = am3517_evm_config; - omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index e5fa46bfde2..3e2d76f05af 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -29,13 +29,11 @@ #include <linux/smc91x.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 97d719047af..8ffd612c5e0 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -23,6 +23,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> @@ -37,15 +38,14 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <mach/hardware.h> @@ -64,7 +64,7 @@ #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0, @@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, } static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = cm_t35_twl_gpio_setup, }; @@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {} static inline void cm_t3730_init_mux(void) {} #endif -static struct omap_board_config_kernel cm_t35_config[] __initdata = { -}; - static void __init cm_t3x_common_init(void) { - omap_board_config = cm_t35_config; - omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a33ad4641d9..59c0a45f75b 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -38,13 +38,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/gpmc.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "mux.h" #include "control.h" @@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_35XX_HECC0_IRQ, - .end = INT_35XX_HECC0_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, }; @@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void) static inline void cm_t3517_init_nand(void) {} #endif -static struct omap_board_config_kernel cm_t3517_config[] __initdata = { -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ @@ -285,8 +280,6 @@ static void __init cm_t3517_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = cm_t3517_config; - omap_board_config_size = ARRAY_SIZE(cm_t3517_config); cm_t3517_init_leds(); cm_t3517_init_nand(); cm_t3517_init_rtc(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 6567c1cd557..7bb8056d438 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -32,31 +32,27 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> - -#include <mach/hardware.h> -#include <mach/id.h> +#include "id.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/dm9000.h> #include <linux/interrupt.h> #include "sdram-micron-mt46h32m32lf-6.h" - #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 53c39d239d6..0cabe61cd50 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -16,13 +16,14 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/irqs.h> +#include <plat/cpu.h> #include <plat/gpmc.h> -#include <plat/nand.h> -#include <plat/onenand.h> +#include <linux/platform_data/mtd-nand-omap2.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include <plat/tc.h> +#include "common.h" #include "board-flash.h" #define REG_FPGA_REV 0x10 @@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6f93a20536e..2ea7c577b29 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,11 +16,9 @@ #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index ace20482e3e..f6c48dd764f 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,20 +27,19 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> -#include "common.h" #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include "debug-devices.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include "common.h" #include "mux.h" #include "control.h" diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 28214483aab..fb8bd837dd1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,13 +29,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> + #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/onenand.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include "mux.h" #include "hsmmc.h" @@ -192,7 +192,7 @@ static void __init igep_flash_init(void) {} #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .cs = IGEP2_SMSC911X_CS, @@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev, }; static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = igep_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ef9e8297749..ee8c3cfb95b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -28,21 +28,17 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> +#include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> #include <mach/board-zoom.h> - -#include <asm/delay.h> #include <plat/usb.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) } static struct twl4030_gpio_platform_data ldp_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = ldp_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 677357ff61a..d95f727ca39 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -20,19 +20,16 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/board.h> #include "common.h" #include <plat/menelaus.h> -#include <mach/irqs.h> -#include <plat/mcspi.h> -#include <plat/onenand.h> #include <plat/mmc.h> -#include <plat/serial.h> #include "mux.h" @@ -553,8 +550,8 @@ static int n8x0_auto_sleep_regulators(void) ret = menelaus_set_regulator_sleep(1, val); if (ret < 0) { - printk(KERN_ERR "Could not set regulators to sleep on " - "menelaus: %u\n", ret); + pr_err("Could not set regulators to sleep on menelaus: %u\n", + ret); return ret; } return 0; @@ -566,8 +563,7 @@ static int n8x0_auto_voltage_scale(void) ret = menelaus_set_vcore_hw(1400, 1050); if (ret < 0) { - printk(KERN_ERR "Could not set VCORE voltage on " - "menelaus: %u\n", ret); + pr_err("Could not set VCORE voltage on menelaus: %u\n", ret); return ret; } return 0; @@ -600,7 +596,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { { I2C_BOARD_INFO("menelaus", 0x72), - .irq = INT_24XX_SYS_NIRQ, + .irq = 7 + OMAP_INTC_START, .platform_data = &n8x0_menelaus_platform_data, }, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6202fc76e49..68ff8d51973 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,18 +33,16 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <plat/omap_device.h> @@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data beagle_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0d362e9f9cb..3fe5f0f69c7 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -40,16 +40,14 @@ #include <linux/mmc/host.h> #include <linux/export.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include <plat/usb.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> @@ -75,6 +73,18 @@ #define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 #define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 +/* + * OMAP35x EVM revision + * Run time detection of EVM revision is done by reading Ethernet + * PHY ID - + * GEN_1 = 0x01150000 + * GEN_2 = 0x92200000 + */ +enum { + OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ + OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ +}; + static u8 omap3_evm_version; u8 get_omap3_evm_rev(void) @@ -108,7 +118,7 @@ static void __init omap3_evm_get_revision(void) } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .cs = OMAP3EVM_SMSC911X_CS, @@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3evm_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3evm_twl_gpio_setup, }; @@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct omap_board_config_kernel omap3_evm_config[] __initdata = { -}; - static struct usbhs_omap_board_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -688,9 +692,6 @@ static void __init omap3_evm_init(void) obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; omap3_mux_init(obm, OMAP_PACKAGE_CBB); - omap_board_config = omap3_evm_config; - omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index fca93d1afd4..7bd8253b5d1 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -30,24 +30,21 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "gpmc-smsc911x.h" +#include <plat/gpmc.h> +#include <plat/sdrc.h> +#include <plat/usb.h> + +#include "common.h" #include "mux.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" -#include <plat/mux.h> -#include <plat/board.h> -#include "common.h" -#include <plat/gpmc-smsc911x.h> -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/usb.h> - #define OMAP3LOGIC_SMSC911X_CS 1 #define OMAP3530_LV_SOM_MMC_GPIO_CD 110 @@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = { }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 57aebee44fd..00a1f4ae6e4 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -35,18 +35,16 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <linux/regulator/fixed.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" -#include <mach/hardware.h> -#include <plat/mcspi.h> #include <plat/usb.h> #include <video/omapdss.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = omap3pandora_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b318f5602e3..c7f3d026e6d 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -28,23 +28,26 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/i2c/at24.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/interrupt.h> @@ -57,7 +60,7 @@ #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 @@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3stalker_twl_gpio_setup, }; @@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 -static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { -}; - static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; @@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void) { regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap_mux_init_gpio(23, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 485d14d6a8c..944ffc43657 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -29,7 +29,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -37,17 +37,15 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/system_info.h> -#include <plat/board.h> #include "common.h" #include <plat/gpmc.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include "mux.h" @@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pullups = BIT(1), .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 70f6d1d2546..45fe2d3f59b 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -32,19 +32,18 @@ #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> -#include <mach/hardware.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <video/omapdss.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" @@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = { static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ @@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, - &twl6040_data, OMAP44XX_IRQ_SYS_2N); + &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 779734d8ba3..2e7f24030fc 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -37,21 +37,19 @@ #include <linux/mtd/partitions.h> #include <linux/mmc/host.h> +#include <linux/platform_data/mtd-nand-omap2.h> +#include <linux/platform_data/spi-omap2-mcspi.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <plat/board.h> #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> -#include <mach/hardware.h> -#include <plat/nand.h> -#include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -116,7 +114,7 @@ static inline void __init overo_ads7846_init(void) { return; } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, @@ -399,9 +397,6 @@ static int overo_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data overo_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = overo_twl_gpio_setup, }; @@ -522,8 +517,7 @@ static void __init overo_init(void) udelay(10); gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_W2W_NRESET\n"); + pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n"); } ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); @@ -542,8 +536,7 @@ static void __init overo_init(void) if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_USBH_CPEN\n"); + pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n"); } MACHINE_START(OVERO, "Gumstix Overo") diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 0ad1bb3bdb9..45997bfbcbd 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -17,6 +17,7 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -26,7 +27,7 @@ #include <plat/usb.h> #include <plat/gpmc.h> #include "common.h" -#include <plat/onenand.h> +#include <plat/serial.h> #include "mux.h" #include "hsmmc.h" @@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = { /* TWL */ static struct twl4030_gpio_platform_data rm680_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pullups = BIT(0), .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), }; @@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = { static void __init rm680_i2c_init(void) { omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); - omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); + omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index df2534de336..3945c501708 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -25,17 +25,17 @@ #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/power/isp1704_charger.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/mtd-onenand-omap2.h> + #include <asm/system_info.h> -#include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> -#include <plat/onenand.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" -#include <mach/board-rx51.h> +#include "board-rx51.h" #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h> @@ -774,9 +774,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) } static struct twl4030_gpio_platform_data rx51_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(8) | BIT(9) | BIT(10) | BIT(11) @@ -1051,7 +1048,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vdac->constraints.apply_uV = true; rx51_twldata.vdac->constraints.name = "VDAC"; - omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); + omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 2c1289bd5e6..c22e111bcd0 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -17,9 +17,9 @@ #include <asm/mach-types.h> #include <video/omapdss.h> #include <plat/vram.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/board-rx51.h> +#include "board-rx51.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 345dd931f76..7bbb05d9689 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,14 +17,12 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mcspi.h> -#include <plat/board.h> #include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/include/mach/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h index b76f49e7eed..b76f49e7eed 100644 --- a/arch/arm/mach-omap2/include/mach/board-rx51.h +++ b/arch/arm/mach-omap2/board-rx51.h diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index d4c8392cadb..c4f8833b4c3 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -15,13 +15,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/irqs.h> -#include <plat/board.h> #include "common.h" #include <plat/usb.h> @@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, }; -static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { -}; - static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti81xx_evm_config; - omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index f64f4417306..afb2278a29f 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -18,10 +18,13 @@ #include <linux/regulator/machine.h> #include <plat/gpmc.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #include <mach/board-zoom.h> +#include "soc.h" +#include "common.h" + #define ZOOM_SMSC911X_CS 7 #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 @@ -81,8 +84,7 @@ static inline void __init zoom_init_quaduart(void) quart_cs = ZOOM_QUADUART_CS; if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem" - "for Quad UART(TL16CP754C)\n"); + pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n"); return; } @@ -104,8 +106,8 @@ static inline int omap_zoom_debugboard_detect(void) if (gpio_request_one(debug_board_detect, GPIOF_IN, "Zoom debug board detect") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" - "board detect\n", debug_board_detect); + pr_err("Failed to request GPIO%d for Zoom debug board detect\n", + debug_board_detect); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 28187f134ff..b940ab2259f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -14,10 +14,12 @@ #include <linux/gpio.h> #include <linux/i2c/twl.h> #include <linux/spi/spi.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> #include <mach/board-zoom.h> +#include "common.h" + #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index b797cb27961..6bcc107b9fc 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -19,6 +19,7 @@ #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> #include <linux/mmc/host.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute) } static struct twl4030_gpio_platform_data zoom_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .setup = zoom_twl_gpio_setup, }; @@ -281,7 +279,7 @@ static int __init omap_i2c_init(void) codec_data->hs_extmute = 1; codec_data->set_hs_extmute = zoom2_set_hs_extmute; } - omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); + omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4e7e56142e6..4994438e1f4 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,7 +22,6 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/board.h> #include <plat/usb.h> #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3d9d746b221..cabcfdba524 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,11 +33,11 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index d6e34dd9e7e..298887b5bf6 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -92,15 +92,13 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC CS0 timing params used:" - " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); if (sdrc_cs1) - pr_debug("clock: SDRC CS1 timing params used: " - " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); if (sdrc_cs1) omap3_configure_core_dpll( diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 04d551b1f7f..19a980956d4 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk, if (!clks->parent) { /* This indicates a data problem */ - WARN(1, "clock: Could not find parent clock %s in clksel array " - "of clock %s\n", src_clk->name, clk->name); + WARN(1, "clock: %s: could not find parent clock %s in clksel array\n", + clk->name, src_clk->name); return NULL; } @@ -126,8 +126,8 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk, if (max_div == 0) { /* This indicates an error in the clksel data */ - WARN(1, "clock: Could not find divisor for clock %s parent %s" - "\n", clk->name, src_clk->parent->name); + WARN(1, "clock: %s: could not find divisor for parent %s\n", + clk->name, src_clk->parent->name); return 0; } @@ -191,8 +191,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) if (!clkr->div) { /* This indicates a data error */ - WARN(1, "clock: Could not find fieldval %d for clock %s parent " - "%s\n", field_val, clk->name, clk->parent->name); + WARN(1, "clock: %s: could not find fieldval %d parent %s\n", + clk->name, field_val, clk->parent->name); return 0; } @@ -230,8 +230,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div) } if (!clkr->div) { - pr_err("clock: Could not find divisor %d for clock %s parent " - "%s\n", div, clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor %d parent %s\n", + clk->name, div, clk->parent->name); return ~0; } @@ -300,8 +300,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - pr_err("clock: clksel_rate table not sorted " - "for clock %s", clk->name); + pr_err("clock: %s: clksel_rate table not sorted", + clk->name); last_div = clkr->div; @@ -312,9 +312,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, } if (!clkr->div) { - pr_err("clock: Could not find divisor for target " - "rate %ld for clock %s parent %s\n", target_rate, - clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n", + clk->name, target_rate, clk->parent->name); return ~0; } @@ -359,8 +358,7 @@ void omap2_init_clksel_parent(struct clk *clk) if (clkr->val == r) { if (clk->parent != clks->parent) { - pr_debug("clock: inited %s parent " - "to %s (was %s)\n", + pr_debug("clock: %s: inited parent to %s (was %s)\n", clk->name, clks->parent->name, ((clk->parent) ? clk->parent->name : "NULL")); diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index cd7fd0f9114..a3b60c7b9aa 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -22,8 +22,8 @@ #include <asm/div64.h> #include <plat/clock.h> -#include <plat/cpu.h> +#include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" @@ -105,13 +105,13 @@ static int _dpll_test_fint(struct clk *clk, u8 n) } if (fint < fint_min) { - pr_debug("rejecting n=%d due to Fint failure, " - "lowering max_divider\n", n); + pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n", + n); dd->max_divider = n; ret = DPLL_FINT_UNDERFLOW; } else if (fint > fint_max) { - pr_debug("rejecting n=%d due to Fint failure, " - "boosting min_divider\n", n); + pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n", + n); dd->min_divider = n; ret = DPLL_FINT_INVALID; } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX && diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ea3f565ba1a..e97f98ffe8b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -22,14 +22,16 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/bitops.h> -#include <trace/events/power.h> #include <asm/cpu.h> + #include <plat/clock.h> -#include "clockdomain.h" -#include <plat/cpu.h> #include <plat/prcm.h> +#include <trace/events/power.h> + +#include "soc.h" +#include "clockdomain.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" @@ -102,8 +104,8 @@ void omap2_init_clk_clkdm(struct clk *clk) clk->name, clk->clkdm_name); clk->clkdm = clkdm; } else { - pr_debug("clock: could not associate clk %s to " - "clkdm %s\n", clk->name, clk->clkdm_name); + pr_debug("clock: could not associate clk %s to clkdm %s\n", + clk->name, clk->clkdm_name); } } @@ -226,8 +228,7 @@ void omap2_dflt_clk_disable(struct clk *clk) * 'Independent' here refers to a clock which is not * controlled by its parent. */ - printk(KERN_ERR "clock: clk_disable called on independent " - "clock %s which has no enable_reg\n", clk->name); + pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name); return; } @@ -270,8 +271,7 @@ const struct clkops clkops_omap2_dflt = { void omap2_clk_disable(struct clk *clk) { if (clk->usecount == 0) { - WARN(1, "clock: %s: omap2_clk_disable() called, but usecount " - "already 0?", clk->name); + WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name); return; } @@ -332,8 +332,8 @@ int omap2_clk_enable(struct clk *clk) if (clkdm_control && clk->clkdm) { ret = clkdm_clk_enable(clk->clkdm, clk); if (ret) { - WARN(1, "clock: %s: could not enable clockdomain %s: " - "%d\n", clk->name, clk->clkdm->name, ret); + WARN(1, "clock: %s: could not enable clockdomain %s: %d\n", + clk->name, clk->clkdm->name, ret); goto oce_err2; } } @@ -501,10 +501,8 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, hfclkin_rate = clk_get_rate(hfclkin_ck); - pr_info("Switched to new clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (hfclkin_rate / 1000000), - ((hfclkin_rate / 100000) % 10), + pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", + (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10), (clk_get_rate(core_ck) / 1000000), (clk_get_rate(mpu_ck) / 1000000)); } diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 002745181ad..12c178dbc9f 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -18,9 +18,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index dfda9a3f2cb..a8e32617746 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index cacabb070e2..7ea91398217 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -17,9 +17,9 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" @@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X), CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X), CLK(NULL, "osc_ck", &osc_ck, CK_243X), + CLK("twl", "fck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 12500097378..e92be1fc1a0 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,9 +22,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index ae27de8899a..8e06de665b1 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -18,8 +18,8 @@ #include <linux/list.h> #include <linux/clk.h> #include <plat/clkdev_omap.h> -#include <plat/am33xx.h> +#include "am33xx.h" #include "iomap.h" #include "control.h" #include "clock.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 794d82702c8..15cdc647173 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,9 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock3xxx.h" #include "prm2xxx_3xxx.h" @@ -49,8 +49,7 @@ int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) * on DPLL4. */ if (omap_rev() == OMAP3430_REV_ES1_0) { - pr_err("clock: DPLL4 cannot change rate due to " - "silicon 'Limitation 2.5' on 3430ES1.\n"); + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); return -EINVAL; } diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 83bed9ad301..700317a1bd1 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,9 +21,9 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock3xxx.h" @@ -3226,6 +3226,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), + CLK("twl", "fck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d7f55e43b76..500682c051c 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,9 +28,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clkdev_omap.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 8664f5a8bfb..a1555627ad9 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -174,9 +174,8 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->clkdm.ptr)) continue; - pr_debug("clockdomain: adding %s sleepdep/wkdep for " - "clkdm %s\n", autodep->clkdm.ptr->name, - clkdm->name); + pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n", + clkdm->name, autodep->clkdm.ptr->name); clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr); clkdm_add_wkdep(clkdm, autodep->clkdm.ptr); @@ -205,9 +204,8 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->clkdm.ptr)) continue; - pr_debug("clockdomain: removing %s sleepdep/wkdep for " - "clkdm %s\n", autodep->clkdm.ptr->name, - clkdm->name); + pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n", + clkdm->name, autodep->clkdm.ptr->name); clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr); clkdm_del_wkdep(clkdm, autodep->clkdm.ptr); @@ -469,14 +467,14 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear wake up of " - "%s when %s wakes up\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", + clkdm1->name, clkdm2->name); return ret; } if (atomic_inc_return(&cd->wkdep_usecount) == 1) { - pr_debug("clockdomain: hardware will wake up %s when %s wakes " - "up\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n", + clkdm1->name, clkdm2->name); ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2); } @@ -510,14 +508,14 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear wake up of " - "%s when %s wakes up\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", + clkdm1->name, clkdm2->name); return ret; } if (atomic_dec_return(&cd->wkdep_usecount) == 0) { - pr_debug("clockdomain: hardware will no longer wake up %s " - "after %s wakes up\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n", + clkdm1->name, clkdm2->name); ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2); } @@ -555,8 +553,8 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear wake up of " - "%s when %s wakes up\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", + clkdm1->name, clkdm2->name); return ret; } @@ -613,15 +611,14 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear sleep " - "dependency affecting %s from %s\n", clkdm1->name, - clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", + clkdm1->name, clkdm2->name); return ret; } if (atomic_inc_return(&cd->sleepdep_usecount) == 1) { - pr_debug("clockdomain: will prevent %s from sleeping if %s " - "is active\n", clkdm1->name, clkdm2->name); + pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n", + clkdm1->name, clkdm2->name); ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2); } @@ -657,16 +654,14 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear sleep " - "dependency affecting %s from %s\n", clkdm1->name, - clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", + clkdm1->name, clkdm2->name); return ret; } if (atomic_dec_return(&cd->sleepdep_usecount) == 0) { - pr_debug("clockdomain: will no longer prevent %s from " - "sleeping if %s is active\n", clkdm1->name, - clkdm2->name); + pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n", + clkdm1->name, clkdm2->name); ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2); } @@ -706,9 +701,8 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) ret = -EINVAL; if (ret) { - pr_debug("clockdomain: hardware cannot set/clear sleep " - "dependency affecting %s from %s\n", clkdm1->name, - clkdm2->name); + pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", + clkdm1->name, clkdm2->name); return ret; } @@ -755,8 +749,8 @@ int clkdm_sleep(struct clockdomain *clkdm) return -EINVAL; if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - pr_debug("clockdomain: %s does not support forcing " - "sleep via software\n", clkdm->name); + pr_debug("clockdomain: %s does not support forcing sleep via software\n", + clkdm->name); return -EINVAL; } @@ -790,8 +784,8 @@ int clkdm_wakeup(struct clockdomain *clkdm) return -EINVAL; if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - pr_debug("clockdomain: %s does not support forcing " - "wakeup via software\n", clkdm->name); + pr_debug("clockdomain: %s does not support forcing wakeup via software\n", + clkdm->name); return -EINVAL; } @@ -826,8 +820,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm) return; if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) { - pr_debug("clock: automatic idle transitions cannot be enabled " - "on clockdomain %s\n", clkdm->name); + pr_debug("clock: %s: automatic idle transitions cannot be enabled\n", + clkdm->name); return; } @@ -861,8 +855,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm) return; if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) { - pr_debug("clockdomain: automatic idle transitions cannot be " - "disabled on %s\n", clkdm->name); + pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n", + clkdm->name); return; } @@ -927,7 +921,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); - pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name); + pr_debug("clockdomain: %s: enabled\n", clkdm->name); return 0; } @@ -952,7 +946,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); - pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name); + pr_debug("clockdomain: %s: disabled\n", clkdm->name); return 0; } diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 389f9f8b570..a911e76b4ec 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,8 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index c1875862679..48daac2581b 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -24,9 +24,10 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <plat/mcspi.h> -#include <plat/nand.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/mtd-nand-omap2.h> +#include "common.h" #include "common-board-devices.h" #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ @@ -119,8 +120,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts, } if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); + pr_info("NAND: Unable to find configuration in GPMC\n"); return; } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 069f9725b1c..17950c6e130 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,11 +17,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> -#include <plat/board.h> -#include <plat/mux.h> #include <plat/clock.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 1f65b1871c2..da0f5c18735 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -26,11 +26,18 @@ #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H #ifndef __ASSEMBLER__ +#include <linux/irq.h> #include <linux/delay.h> #include <linux/i2c/twl.h> -#include <plat/common.h> + #include <asm/proc-fns.h> +#include <plat/cpu.h> +#include <plat/serial.h> +#include <plat/common.h> + +#define OMAP_INTC_START NR_IRQS + #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); #else diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 3223b81e753..d1ff8399a22 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,9 +15,9 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index b8cdc8531b6..123186ac7d2 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -16,12 +16,12 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H #define __ARCH_ARM_MACH_OMAP2_CONTROL_H -#include <mach/ctrl_module_core_44xx.h> -#include <mach/ctrl_module_wkup_44xx.h> -#include <mach/ctrl_module_pad_core_44xx.h> -#include <mach/ctrl_module_pad_wkup_44xx.h> +#include "ctrl_module_core_44xx.h" +#include "ctrl_module_wkup_44xx.h" +#include "ctrl_module_pad_core_44xx.h" +#include "ctrl_module_pad_wkup_44xx.h" -#include <plat/am33xx.h> +#include "am33xx.h" #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f2a49a48ef5..bc2756959be 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -28,7 +28,6 @@ #include <linux/cpu_pm.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h index 01970824e0e..01970824e0e 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +++ b/arch/arm/mach-omap2/ctrl_module_core_44xx.h diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h index c88420de115..c88420de115 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h index 17c9b37042c..17c9b37042c 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h +++ b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h index a0af9baec3f..a0af9baec3f 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h +++ b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h new file mode 100644 index 00000000000..a4edbd2f748 --- /dev/null +++ b/arch/arm/mach-omap2/debug-devices.h @@ -0,0 +1,9 @@ +#ifndef _OMAP_DEBUG_DEVICES_H +#define _OMAP_DEBUG_DEVICES_H + +#include <linux/types.h> + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c00c68961bb..d092d2a89ee 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -17,21 +17,20 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/pmu.h> #include "iomap.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/omap4-keypad.h> +#include "omap4-keypad.h" +#include "soc.h" +#include "common.h" #include "mux.h" #include "control.h" #include "devices.h" @@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_CAM_IRQ, + .start = 24 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -385,7 +384,7 @@ static inline void omap_init_hdmi_audio(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) { @@ -435,20 +434,18 @@ static inline void omap_init_mcspi(void) {} #endif static struct resource omap2_pmu_resource = { - .start = 3, - .end = 3, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; static struct resource omap3_pmu_resource = { - .start = INT_34XX_BENCH_MPU_EMUL, - .end = INT_34XX_BENCH_MPU_EMUL, + .start = 3 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }; static struct platform_device omap_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, }; @@ -475,7 +472,7 @@ static struct resource omap2_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_24XX_SHA1MD5, + .start = 51 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, } }; @@ -493,7 +490,7 @@ static struct resource omap3_sham_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_34XX_SHA1MD52_IRQ, + .start = 49 + OMAP_INTC_START, .flags = IORESOURCE_IRQ, }, { @@ -631,6 +628,10 @@ static inline void omap_init_vout(void) {} static int __init omap2_init_devices(void) { + /* Enable dummy states for those platforms without pinctrl support */ + if (!of_have_populated_dt()) + pinctrl_provide_dummies(); + /* * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index b9c8d2f6a81..ef666455c13 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,9 +28,9 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" @@ -623,8 +623,11 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) while (pclk && !pclk->dpll_data) pclk = pclk->parent; - /* clk does not have a DPLL as a parent? */ - WARN_ON(!pclk); + /* clk does not have a DPLL as a parent? error in the clock data */ + if (!pclk) { + WARN_ON(1); + return 0; + } dd = pclk->dpll_data; diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 9c6a296b3dc..09d0ccccb86 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,9 +15,9 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/cpu.h> #include <plat/clock.h> +#include "soc.h" #include "clock.h" #include "clock44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index a636ebc16b3..98388109f22 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -30,7 +30,7 @@ #include <plat/omap-pm.h> #endif -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> static struct platform_device *omap_dsp_pdev; diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index e28e761b7ab..b3566f68a55 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9ad7d489b0d..e7b246da02d 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -21,6 +21,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/of.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -60,6 +61,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); if (!pdata->regs) { pr_err("gpio%d: Memory allocation failed\n", id); + kfree(pdata); return -ENOMEM; } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 386dec8d235..4acf497faeb 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -13,23 +13,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #include <asm/mach/flash.h> -#include <plat/cpu.h> -#include <plat/nand.h> -#include <plat/board.h> #include <plat/gpmc.h> -static struct resource gpmc_nand_resource = { - .flags = IORESOURCE_MEM, +#include "soc.h" + +static struct resource gpmc_nand_resource[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + { + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device gpmc_nand_device = { .name = "omap2-nand", .id = 0, - .num_resources = 1, - .resource = &gpmc_nand_resource, + .num_resources = ARRAY_SIZE(gpmc_nand_resource), + .resource = gpmc_nand_resource, }; static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) @@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, - &gpmc_nand_data->phys_base); + (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { dev_err(dev, "Cannot request GPMC CS\n"); return err; } + gpmc_nand_resource[0].end = gpmc_nand_resource[0].start + + NAND_IO_SIZE - 1; + + gpmc_nand_resource[1].start = + gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); + gpmc_nand_resource[2].start = + gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); /* Set timings in GPMC */ err = omap2_nand_gpmc_retime(gpmc_nand_data); if (err < 0) { @@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); } + gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index a0fa9bb2bda..916716e1da3 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -15,19 +15,27 @@ #include <linux/platform_device.h> #include <linux/mtd/onenand_regs.h> #include <linux/io.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include <asm/mach/flash.h> -#include <plat/cpu.h> -#include <plat/onenand.h> -#include <plat/board.h> #include <plat/gpmc.h> +#include "soc.h" + +#define ONENAND_IO_SIZE SZ_128K + static struct omap_onenand_platform_data *gpmc_onenand_data; +static struct resource gpmc_onenand_resource = { + .flags = IORESOURCE_MEM, +}; + static struct platform_device gpmc_onenand_device = { .name = "omap2-onenand", .id = -1, + .num_resources = 1, + .resource = &gpmc_onenand_resource, }; static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) @@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { + int err; + gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; @@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, + (unsigned long *)&gpmc_onenand_resource.start); + if (err < 0) { + pr_err("%s: Cannot request GPMC CS\n", __func__); + return; + } + + gpmc_onenand_resource.end = gpmc_onenand_resource.start + + ONENAND_IO_SIZE - 1; + if (platform_device_register(&gpmc_onenand_device) < 0) { - printk(KERN_ERR "Unable to register OneNAND device\n"); + pr_err("%s: Unable to register OneNAND device\n", __func__); + gpmc_cs_free(gpmc_onenand_data->cs); return; } } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index ba10c24f3d8..56547531037 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,9 +17,10 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/board.h> #include <plat/gpmc.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" + +#include "soc.h" static struct omap_smc91x_platform_data *gpmc_cfg; diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h index b64fbee4d56..b64fbee4d56 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h +++ b/arch/arm/mach-omap2/gpmc-smc91x.h diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index b6c77be3e8f..249a0b440cd 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,9 +20,8 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/board.h> #include <plat/gpmc.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { [0] = { diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h index ea6c9c88c72..ea6c9c88c72 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/mach-omap2/gpmc-smsc911x.h diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index b2b5759ab0f..72428bd45ef 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -28,8 +28,13 @@ #include <asm/mach-types.h> #include <plat/gpmc.h> +#include <plat/cpu.h> +#include <plat/gpmc.h> #include <plat/sdrc.h> +#include "soc.h" +#include "common.h" + /* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 @@ -78,6 +83,15 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +/* XXX: Only NAND irq has been considered,currently these are the only ones used + */ +#define GPMC_NR_IRQ 2 + +struct gpmc_client_irq { + unsigned irq; + u32 bitmask; +}; + /* Structure to save gpmc cs context */ struct gpmc_cs_config { u32 config1; @@ -105,6 +119,10 @@ struct omap3_gpmc_regs { struct gpmc_cs_config cs_context[GPMC_CS_NUM]; }; +static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ]; +static struct irq_chip gpmc_irq_chip; +static unsigned gpmc_irq_start; + static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); @@ -279,7 +297,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) div = gpmc_cs_calc_divider(cs, t->sync_clk); if (div < 0) - return -1; + return div; GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on); GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off); @@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs) } EXPORT_SYMBOL(gpmc_prefetch_reset); +void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) +{ + reg->gpmc_status = gpmc_base + GPMC_STATUS; + reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; + reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs; + reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET + + GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs; + reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1; + reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2; + reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL; + reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS; + reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG; + reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; + reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; + reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; + reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; +} + +int gpmc_get_client_irq(unsigned irq_config) +{ + int i; + + if (hweight32(irq_config) > 1) + return 0; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (gpmc_client_irq[i].bitmask & irq_config) + return gpmc_client_irq[i].irq; + + return 0; +} + +static int gpmc_irq_endis(unsigned irq, bool endis) +{ + int i; + u32 regval; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (irq == gpmc_client_irq[i].irq) { + regval = gpmc_read_reg(GPMC_IRQENABLE); + if (endis) + regval |= gpmc_client_irq[i].bitmask; + else + regval &= ~gpmc_client_irq[i].bitmask; + gpmc_write_reg(GPMC_IRQENABLE, regval); + break; + } + + return 0; +} + +static void gpmc_irq_disable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, false); +} + +static void gpmc_irq_enable(struct irq_data *p) +{ + gpmc_irq_endis(p->irq, true); +} + +static void gpmc_irq_noop(struct irq_data *data) { } + +static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; } + +static int gpmc_setup_irq(int gpmc_irq) +{ + int i; + u32 regval; + + if (!gpmc_irq) + return -EINVAL; + + gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); + if (IS_ERR_VALUE(gpmc_irq_start)) { + pr_err("irq_alloc_descs failed\n"); + return gpmc_irq_start; + } + + gpmc_irq_chip.name = "gpmc"; + gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret; + gpmc_irq_chip.irq_enable = gpmc_irq_enable; + gpmc_irq_chip.irq_disable = gpmc_irq_disable; + gpmc_irq_chip.irq_shutdown = gpmc_irq_noop; + gpmc_irq_chip.irq_ack = gpmc_irq_noop; + gpmc_irq_chip.irq_mask = gpmc_irq_noop; + gpmc_irq_chip.irq_unmask = gpmc_irq_noop; + + gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE; + gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT; + + for (i = 0; i < GPMC_NR_IRQ; i++) { + gpmc_client_irq[i].irq = gpmc_irq_start + i; + irq_set_chip_and_handler(gpmc_client_irq[i].irq, + &gpmc_irq_chip, handle_simple_irq); + set_irq_flags(gpmc_client_irq[i].irq, + IRQF_VALID | IRQF_NOAUTOEN); + } + + /* Disable interrupts */ + gpmc_write_reg(GPMC_IRQENABLE, 0); + + /* clear interrupts */ + regval = gpmc_read_reg(GPMC_IRQSTATUS); + gpmc_write_reg(GPMC_IRQSTATUS, regval); + + return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); +} + static void __init gpmc_mem_init(void) { int cs; @@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void) static int __init gpmc_init(void) { - u32 l, irq; - int cs, ret = -EINVAL; + u32 l; + int ret = -EINVAL; int gpmc_irq; char *ck = NULL; @@ -722,16 +851,16 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; - gpmc_irq = INT_34XX_GPMC_IRQ; + gpmc_irq = 20 + OMAP_INTC_START; } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { /* Base address and irq number are same for OMAP4/5 */ ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; - gpmc_irq = OMAP44XX_IRQ_GPMC; + gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START; } if (WARN_ON(!ck)) @@ -761,16 +890,7 @@ static int __init gpmc_init(void) gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); - /* initalize the irq_chained */ - irq = OMAP_GPMC_IRQ_BASE; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - irq_set_chip_and_handler(irq, &dummy_irq_chip, - handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - irq++; - } - - ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); + ret = gpmc_setup_irq(gpmc_irq); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); @@ -780,12 +900,19 @@ postcore_initcall(gpmc_init); static irqreturn_t gpmc_handle_irq(int irq, void *dev) { - u8 cs; + int i; + u32 regval; + + regval = gpmc_read_reg(GPMC_IRQSTATUS); + + if (!regval) + return IRQ_NONE; + + for (i = 0; i < GPMC_NR_IRQ; i++) + if (regval & gpmc_client_irq[i].bitmask) + generic_handle_irq(gpmc_client_irq[i].irq); - /* check cs to invoke the irq */ - cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; - if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) - generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs); + gpmc_write_reg(GPMC_IRQSTATUS, regval); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index cdd6dda0382..e003f2bba30 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -29,7 +29,7 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/hdq1w.h> +#include "hdq1w.h" #include "common.h" diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h index 0c1efc846d8..0c1efc846d8 100644 --- a/arch/arm/plat-omap/include/plat/hdq1w.h +++ b/arch/arm/mach-omap2/hdq1w.h diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9675d8d182..03ebf47cfa9 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -15,9 +15,10 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> +#include <linux/platform_data/gpio-omap.h> + #include <plat/mmc.h> #include <plat/omap-pm.h> -#include <plat/mux.h> #include <plat/omap_device.h> #include "mux.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index a12e224eb97..fc57e67b321 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,7 +19,6 @@ * */ -#include <plat/cpu.h> #include <plat/i2c.h> #include "common.h" #include <plat/omap_hwmod.h> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 40373db649a..cf2362ccb23 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -22,10 +22,10 @@ #include <asm/cputype.h> #include "common.h" -#include <plat/cpu.h> -#include <mach/id.h> +#include "id.h" +#include "soc.h" #include "control.h" static unsigned int omap_revision; @@ -161,9 +161,8 @@ void __init omap2xxx_check_revision(void) } if (j == ARRAY_SIZE(omap_ids)) { - printk(KERN_ERR "Unknown OMAP device type. " - "Handling it as OMAP%04x\n", - omap_ids[i].type >> 16); + pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n", + omap_ids[i].type >> 16); j = i; } diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/id.h index 02ed3aa56f1..02ed3aa56f1 100644 --- a/arch/arm/mach-omap2/include/mach/id.h +++ b/arch/arm/mach-omap2/id.h diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h index be4d290d57e..5621cc59c9f 100644 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/gpio.h */ - -#include <plat/gpio.h> diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h index 78edf9d33f7..54492dbf697 100644 --- a/arch/arm/mach-omap2/include/mach/hardware.h +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/hardware.h */ - -#include <plat/hardware.h> diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h index 44dab772569..ba5282cafa4 100644 --- a/arch/arm/mach-omap2/include/mach/irqs.h +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -1,5 +1,3 @@ /* * arch/arm/mach-omap2/include/mach/irqs.h */ - -#include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h deleted file mode 100644 index 323675f21b6..00000000000 --- a/arch/arm/mach-omap2/include/mach/smp.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/smp.h - */ - -#include <plat/smp.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4d2d981ff5c..0d79c23e9f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,6 +33,7 @@ #include <plat/multi.h> #include <plat/dma.h> +#include "soc.h" #include "iomap.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index bcd83db41bb..3926f370448 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -23,8 +23,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "common.h" @@ -49,6 +48,8 @@ #define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ +#define INTCPS_NR_MIR_REGS 3 +#define INTCPS_NR_IRQS 96 /* * OMAP2 has a number of different interrupt controllers, each interrupt @@ -107,9 +108,8 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) unsigned long tmp; tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; - printk(KERN_INFO "IRQ: Found an INTC at 0x%p " - "(revision %ld.%ld) with %d interrupts\n", - bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); + pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n", + bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h index b8b5641379b..b8b5641379b 100644 --- a/arch/arm/plat-omap/include/plat/l3_2xxx.h +++ b/arch/arm/mach-omap2/l3_2xxx.h diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/mach-omap2/l3_3xxx.h index cde1938c5f8..cde1938c5f8 100644 --- a/arch/arm/plat-omap/include/plat/l3_3xxx.h +++ b/arch/arm/mach-omap2/l3_3xxx.h diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h index 3f39cf8a35c..3f39cf8a35c 100644 --- a/arch/arm/plat-omap/include/plat/l4_2xxx.h +++ b/arch/arm/mach-omap2/l4_2xxx.h diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/mach-omap2/l4_3xxx.h index 881a858b1ff..881a858b1ff 100644 --- a/arch/arm/plat-omap/include/plat/l4_3xxx.h +++ b/arch/arm/mach-omap2/l4_3xxx.h diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 6875be837d9..0d974565f8c 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -16,8 +16,10 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/pm_runtime.h> + #include <plat/mailbox.h> -#include <mach/irqs.h> + +#include "soc.h" #define MAILBOX_REVISION 0x000 #define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 577cb77db26..7d47407d6d4 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -17,11 +17,9 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> -#include <mach/irqs.h> #include <plat/dma.h> -#include <plat/cpu.h> -#include <plat/mcbsp.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index fb5bc6cf377..9e57b4aadb0 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/err.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 414083b427d..765a2aceb66 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" #include "common.h" diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 1be8bcb52e9..df298d46707 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -14,7 +14,9 @@ #include <linux/platform_device.h> #include <plat/iommu.h> -#include <plat/irqs.h> + +#include "soc.h" +#include "common.h" struct iommu_device { resource_size_t base; @@ -29,7 +31,7 @@ static int num_iommu_devices; static struct iommu_device omap3_devices[] = { { .base = 0x480bd400, - .irq = 24, + .irq = 24 + OMAP_INTC_START, .pdata = { .name = "isp", .nr_tlb_entries = 8, @@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = { #if defined(CONFIG_OMAP_IOMMU_IVA2) { .base = 0x5d000000, - .irq = 28, + .irq = 28 + OMAP_INTC_START, .pdata = { .name = "iva2", .nr_tlb_entries = 32, @@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; static struct iommu_device omap4_devices[] = { { .base = OMAP4_MMU1_BASE, - .irq = OMAP44XX_IRQ_DUCATI_MMU, + .irq = 100 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "ducati", .nr_tlb_entries = 32, @@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = { }, { .base = OMAP4_MMU2_BASE, - .irq = OMAP44XX_IRQ_TESLA_MMU, + .irq = 28 + OMAP44XX_IRQ_GIC_START, .pdata = { .name = "tesla", .nr_tlb_entries = 32, diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 637a1bdf2ac..ff4e6a0e9c7 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,9 +50,8 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> - #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #include "pm.h" #include "prcm_mpu44xx.h" diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index d9ae4a53d81..a004cb9acf5 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -19,7 +19,7 @@ #include <asm/memblock.h> #include <plat/omap-secure.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index c90a43589ab..c90a43589ab 100644 --- a/arch/arm/mach-omap2/include/mach/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 9a35adf9123..06d8bc3a888 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,11 +24,11 @@ #include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> -#include <mach/omap-secure.h> -#include <mach/omap-wakeupgen.h> +#include "omap-secure.h" +#include "omap-wakeupgen.h" #include <asm/cputype.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 330d4c6e746..b3275babf19 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -27,9 +27,10 @@ #include <asm/hardware/gic.h> -#include <mach/omap-wakeupgen.h> -#include <mach/omap-secure.h> +#include "omap-wakeupgen.h" +#include "omap-secure.h" +#include "soc.h" #include "omap4-sar-layout.h" #include "common.h" diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h index b0fd16f5c39..b0fd16f5c39 100644 --- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/omap-wakeupgen.h diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h index 92df9e27cc5..641a2c8d2ee 100644 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ b/arch/arm/mach-omap2/omap24xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap24xx.h - * * This file contains the processor specific definitions * of the TI OMAP24XX. * diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h index 0d818acf391..c0d1b4b1653 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/mach-omap2/omap34xx.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/omap34xx.h - * * This file contains the processor specific definitions of the TI OMAP34XX. * * Copyright (C) 2007 Texas Instruments. diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c29dee998a7..9fc865502f0 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -16,26 +16,25 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/memblock.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/export.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <plat/irqs.h> #include <plat/sram.h> #include <plat/omap-secure.h> #include <plat/mmc.h> -#include <mach/hardware.h> -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" +#include "soc.h" #include "common.h" #include "hsmmc.h" #include "omap4-sar-layout.h" -#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h index 8ad0a377a54..20de0d5a7e7 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/mach-omap2/omap4-keypad.h @@ -1,6 +1,8 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H +struct omap_board_data; + extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h index c0d478e55c8..43b927b2e2e 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/mach-omap2/omap44xx.h @@ -39,12 +39,12 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_IRQ_GIC_START 32 #define OMAP44XX_SCU_BASE 0x48240000 #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 #define OMAP44XX_L2CACHE_BASE 0x48242000 #define OMAP44XX_WKUPGEN_BASE 0x48281000 #define OMAP44XX_MCPDM_BASE 0x40132000 -#define OMAP44XX_MCPDM_L3_BASE 0x49032000 #define OMAP44XX_SAR_RAM_BASE 0x4a326000 #define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb3cab..a2582bb3cab 100644 --- a/arch/arm/plat-omap/include/plat/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 37afbd173c2..3615e0d9ee3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,14 +139,14 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include "common.h" -#include <plat/cpu.h> -#include "clockdomain.h" -#include "powerdomain.h" #include <plat/clock.h> #include <plat/omap_hwmod.h> #include <plat/prcm.h> +#include "soc.h" +#include "common.h" +#include "clockdomain.h" +#include "powerdomain.h" #include "cm2xxx_3xxx.h" #include "cminst44xx.h" #include "prm2xxx_3xxx.h" @@ -1438,8 +1438,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) * Return the bit position of the reset line that match the * input name. Return -ENOENT if not found. */ -static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, - struct omap_hwmod_rst_info *ohri) +static int _lookup_hardreset(struct omap_hwmod *oh, const char *name, + struct omap_hwmod_rst_info *ohri) { int i; @@ -1475,7 +1475,7 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, static int _assert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret = -EINVAL; + int ret = -EINVAL; if (!oh) return -EINVAL; @@ -1484,7 +1484,7 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) return -ENOSYS; ret = _lookup_hardreset(oh, name, &ohri); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; ret = soc_ops.assert_hardreset(oh, &ohri); @@ -1542,7 +1542,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) static int _read_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret = -EINVAL; + int ret = -EINVAL; if (!oh) return -EINVAL; @@ -1551,7 +1551,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) return -ENOSYS; ret = _lookup_hardreset(oh, name, &ohri); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; return soc_ops.is_hardreset_asserted(oh, &ohri); @@ -1641,8 +1641,8 @@ static int _ocp_softreset(struct omap_hwmod *oh) /* clocks must be on for this operation */ if (oh->_state != _HWMOD_STATE_ENABLED) { - pr_warning("omap_hwmod: %s: reset can only be entered from " - "enabled state\n", oh->name); + pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n", + oh->name); return -EINVAL; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 50cfab61b0e..10575a1bc1f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -12,17 +12,15 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ +#include <linux/platform_data/spi-omap2-mcspi.h> + #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> -#include <plat/mcspi.h> #include <plat/dmtimer.h> -#include <plat/l3_2xxx.h> -#include <plat/l4_2xxx.h> +#include "l3_2xxx.h" +#include "l4_2xxx.h" #include <plat/mmc.h> #include "omap_hwmod_common_data.h" @@ -162,9 +160,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { - { .name = "dsp", .irq = 26 }, - { .name = "iva", .irq = 34 }, - { .irq = -1 } + { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, + { .name = "iva", .irq = 34 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mailbox_hwmod = { @@ -199,9 +197,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp1_hwmod = { @@ -225,9 +223,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2420_mcbsp2_hwmod = { @@ -265,8 +263,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = { /* msdi1 */ static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 58b5bc196d3..60de70feeae 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -12,21 +12,19 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ +#include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/spi-omap2-mcspi.h> + #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> #include <plat/i2c.h> -#include <plat/gpio.h> -#include <plat/mcbsp.h> -#include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/mmc.h> -#include <plat/l3_2xxx.h> +#include "l3_2xxx.h" +#include "soc.h" #include "omap_hwmod_common_data.h" - #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "wd_timer.h" @@ -133,8 +131,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { - { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod omap2430_gpio5_hwmod = { @@ -173,8 +171,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { /* mailbox */ static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mailbox_hwmod = { @@ -195,8 +193,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { /* mcspi3 */ static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { - { .irq = 91 }, - { .irq = -1 } + { .irq = 91 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { @@ -250,9 +248,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_usbhsotg_hwmod = { @@ -303,11 +301,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .name = "ovr", .irq = 61 }, - { .name = "common", .irq = 64 }, - { .irq = -1 } + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .name = "ovr", .irq = 61 + OMAP_INTC_START, }, + { .name = "common", .irq = 64 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp1_hwmod = { @@ -331,10 +329,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .name = "common", .irq = 16 }, - { .irq = -1 } + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp2_hwmod = { @@ -358,10 +356,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .name = "common", .irq = 17 }, - { .irq = -1 } + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap2430_mcbsp3_hwmod = { @@ -385,10 +383,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .name = "common", .irq = 18 }, - { .irq = -1 } + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .name = "common", .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { @@ -418,10 +416,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .name = "common", .irq = 19 }, - { .irq = -1 } + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .name = "common", .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { @@ -468,8 +466,8 @@ static struct omap_hwmod_class omap2430_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { - { .irq = 83 }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { @@ -509,8 +507,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { - { .irq = 86 }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 102d76e9e9e..8851bbb6bb2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -13,9 +13,7 @@ #include <plat/serial.h> #include <plat/dma.h> #include <plat/common.h> -#include <plat/hdq1w.h> - -#include <mach/irqs.h> +#include "hdq1w.h" #include "omap_hwmod_common_data.h" @@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = { /* Common MPU IRQ line data */ struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = { - { .irq = 37, }, - { .irq = -1 } + { .irq = 37 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = { - { .irq = 38, }, - { .irq = -1 } + { .irq = 38 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = { - { .irq = 39, }, - { .irq = -1 } + { .irq = 39 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = { - { .irq = 40, }, - { .irq = -1 } + { .irq = 40 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = { - { .irq = 41, }, - { .irq = -1 } + { .irq = 41 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = { - { .irq = 42, }, - { .irq = -1 } + { .irq = 42 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = { - { .irq = 43, }, - { .irq = -1 } + { .irq = 43 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = { - { .irq = 44, }, - { .irq = -1 } + { .irq = 44 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = { - { .irq = 45, }, - { .irq = -1 } + { .irq = 45 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = { - { .irq = 46, }, - { .irq = -1 } + { .irq = 46 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = { - { .irq = 47, }, - { .irq = -1 } + { .irq = 47 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, - { .irq = -1 } + { .irq = 72 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, - { .irq = -1 } + { .irq = 73 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, - { .irq = -1 } + { .irq = 74 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dispc_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, - { .irq = -1 } + { .irq = 56 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, - { .irq = -1 } + { .irq = 57 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio1_irqs[] = { - { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ - { .irq = -1 } + { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio2_irqs[] = { - { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ - { .irq = -1 } + { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio3_irqs[] = { - { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ - { .irq = -1 } + { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_gpio4_irqs[] = { - { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ - { .irq = -1 } + { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ - { .irq = -1 } + { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */ + { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */ + { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */ + { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */ + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = { - { .irq = 65 }, - { .irq = -1 } + { .irq = 65 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { - { .irq = 66 }, - { .irq = -1 } + { .irq = 66 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = { @@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = { }; struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = { - { .irq = 58, }, - { .irq = -1 } + { .irq = 58 + OMAP_INTC_START, }, + { .irq = -1 }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 5178e40e84f..f853a0b1d5c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -15,8 +15,8 @@ #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/l3_2xxx.h> -#include <plat/l4_2xxx.h> +#include "l3_2xxx.h" +#include "l4_2xxx.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index afad69c6ba6..feeb401cf87 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,12 +10,10 @@ */ #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/dma.h> #include <plat/dmtimer.h> -#include <plat/mcspi.h> - -#include <mach/irqs.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" @@ -23,8 +21,8 @@ #include "wd_timer.h" struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { - { .irq = 48, }, - { .irq = -1 } + { .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ce7e6068768..94b38af1705 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -15,26 +15,26 @@ * XXX these should be marked initdata for multi-OMAP kernels */ #include <linux/power/smartreflex.h> +#include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> -#include <mach/irqs.h> -#include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> -#include <plat/l3_3xxx.h> -#include <plat/l4_3xxx.h> +#include "l3_3xxx.h" +#include "l4_3xxx.h" #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/mmc.h> -#include <plat/mcbsp.h> -#include <plat/mcspi.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <plat/dmtimer.h> +#include "am35xx.h" + +#include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" -#include <mach/am35xx.h> /* * OMAP3xxx hardware module integration data @@ -51,9 +51,9 @@ /* L3 */ static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { - { .irq = INT_34XX_L3_DBG_IRQ }, - { .irq = INT_34XX_L3_APP_IRQ }, - { .irq = -1 } + { .irq = 9 + OMAP_INTC_START, }, + { .irq = 10 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_l3_main_hwmod = { @@ -364,8 +364,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { /* timer12 */ static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { - { .irq = 95, }, - { .irq = -1 } + { .irq = 95 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_timer12_hwmod = { @@ -499,8 +499,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { /* UART4 */ static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { - { .irq = INT_36XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 80 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { @@ -527,8 +527,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { }; static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { - { .irq = INT_35XX_UART4_IRQ, }, - { .irq = -1 } + { .irq = 84 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { @@ -683,8 +683,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { - { .irq = 25 }, - { .irq = -1 } + { .irq = 25 + OMAP_INTC_START, }, + { .irq = -1 }, }; /* dss_dsi1 */ @@ -813,8 +813,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = { }; static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { - { .irq = INT_34XX_I2C3_IRQ, }, - { .irq = -1 } + { .irq = 61 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { @@ -972,8 +972,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { - { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */ - { .irq = -1 } + { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { @@ -1002,8 +1002,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { /* gpio6 */ static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { - { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */ - { .irq = -1 } + { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */ + { .irq = -1 }, }; static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { @@ -1107,10 +1107,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { - { .name = "common", .irq = 16 }, - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } + { .name = "common", .irq = 16 + OMAP_INTC_START, }, + { .name = "tx", .irq = 59 + OMAP_INTC_START, }, + { .name = "rx", .irq = 60 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { @@ -1134,10 +1134,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { - { .name = "common", .irq = 17 }, - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } + { .name = "common", .irq = 17 + OMAP_INTC_START, }, + { .name = "tx", .irq = 62 + OMAP_INTC_START, }, + { .name = "rx", .irq = 63 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { @@ -1166,10 +1166,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { - { .name = "common", .irq = 22 }, - { .name = "tx", .irq = 89 }, - { .name = "rx", .irq = 90 }, - { .irq = -1 } + { .name = "common", .irq = 22 + OMAP_INTC_START, }, + { .name = "tx", .irq = 89 + OMAP_INTC_START, }, + { .name = "rx", .irq = 90 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { @@ -1198,10 +1198,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { - { .name = "common", .irq = 23 }, - { .name = "tx", .irq = 54 }, - { .name = "rx", .irq = 55 }, - { .irq = -1 } + { .name = "common", .irq = 23 + OMAP_INTC_START, }, + { .name = "tx", .irq = 54 + OMAP_INTC_START, }, + { .name = "rx", .irq = 55 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { @@ -1231,10 +1231,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { - { .name = "common", .irq = 27 }, - { .name = "tx", .irq = 81 }, - { .name = "rx", .irq = 82 }, - { .irq = -1 } + { .name = "common", .irq = 27 + OMAP_INTC_START, }, + { .name = "tx", .irq = 81 + OMAP_INTC_START, }, + { .name = "rx", .irq = 82 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { @@ -1276,8 +1276,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { /* mcbsp2_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { - { .name = "irq", .irq = 4 }, - { .irq = -1 } + { .name = "irq", .irq = 4 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { @@ -1298,8 +1298,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { /* mcbsp3_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { - { .name = "irq", .irq = 5 }, - { .irq = -1 } + { .name = "irq", .irq = 5 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { @@ -1361,8 +1361,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { - { .irq = 18 }, - { .irq = -1 } + { .irq = 18 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr1_hwmod = { @@ -1406,8 +1406,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = { }; static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { - { .irq = 19 }, - { .irq = -1 } + { .irq = 19 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap34xx_sr2_hwmod = { @@ -1467,8 +1467,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 }, - { .irq = -1 } + { .irq = 26 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_mailbox_hwmod = { @@ -1558,8 +1558,8 @@ static struct omap_hwmod omap34xx_mcspi2 = { /* mcspi3 */ static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { - { .name = "irq", .irq = 91 }, /* 91 */ - { .irq = -1 } + { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */ + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { @@ -1594,8 +1594,8 @@ static struct omap_hwmod omap34xx_mcspi3 = { /* mcspi4 */ static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { - { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ - { .irq = -1 } + { .name = "irq", .irq = 48 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { @@ -1647,9 +1647,9 @@ static struct omap_hwmod_class usbotg_class = { /* usb_otg_hs */ static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 92 }, - { .name = "dma", .irq = 93 }, - { .irq = -1 } + { .name = "mc", .irq = 92 + OMAP_INTC_START, }, + { .name = "dma", .irq = 93 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { @@ -1679,8 +1679,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, - { .irq = -1 } + { .name = "mc", .irq = 71 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_usbotg_class = { @@ -1715,8 +1715,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = { /* MMC/SD/SDIO1 */ static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { - { .irq = 83, }, - { .irq = -1 } + { .irq = 83 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { @@ -1782,8 +1782,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { /* MMC/SD/SDIO2 */ static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { - { .irq = INT_24XX_MMC2_IRQ, }, - { .irq = -1 } + { .irq = 86 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { @@ -1843,8 +1843,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { /* MMC/SD/SDIO3 */ static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { - { .irq = 94, }, - { .irq = -1 } + { .irq = 94 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { @@ -1902,9 +1902,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { }; static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { - { .name = "ohci-irq", .irq = 76 }, - { .name = "ehci-irq", .irq = 77 }, - { .irq = -1 } + { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, }, + { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { @@ -1996,8 +1996,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { - { .name = "tll-irq", .irq = 78 }, - { .irq = -1 } + { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, }, + { .irq = -1 }, }; static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { @@ -3223,11 +3223,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { }; static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { - { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, - { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, - { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, - { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, - { .irq = -1 } + { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, }, + { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, }, + { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START }, + { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START }, + { .irq = -1 }, }; static struct omap_hwmod_class am35xx_emac_class = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index afb60917a94..f9bcb24cd51 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,15 +19,14 @@ */ #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> -#include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/gpio.h> #include <plat/dma.h> -#include <plat/mcspi.h> -#include <plat/mcbsp.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/mmc.h> #include <plat/dmtimer.h> #include <plat/common.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index e7e8eeae95e..dddb677fed6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,7 @@ #include <plat/omap_hwmod.h> +#include "common.h" #include "display.h" /* Common address space across OMAP2xxx */ diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index d15225ff5c4..f447e02102b 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/slab.h> +#include "soc.h" #include "omap_l3_noc.h" /* @@ -190,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_DBG); + 9 + OMAP44XX_IRQ_GIC_START); goto err3; } @@ -200,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev) IRQF_DISABLED, "l3-app-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_APP); + 10 + OMAP44XX_IRQ_GIC_START); goto err4; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d52651a05da..593eaea35ce 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -29,6 +29,8 @@ #include <linux/usb.h> #include <plat/usb.h> + +#include "soc.h" #include "control.h" /* OMAP control module register for UTMI PHY */ diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index d8f6dbf45d1..45ad7f74f35 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -64,25 +64,22 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, } oh = omap_hwmod_lookup(opp_def->hwmod_name); if (!oh || !oh->od) { - pr_debug("%s: no hwmod or odev for %s, [%d] " - "cannot add OPPs.\n", __func__, - opp_def->hwmod_name, i); + pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", + __func__, opp_def->hwmod_name, i); continue; } dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { - dev_err(dev, "%s: add OPP %ld failed for %s [%d] " - "result=%d\n", - __func__, opp_def->freq, - opp_def->hwmod_name, i, r); + dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n", + __func__, opp_def->freq, + opp_def->hwmod_name, i, r); } else { if (!opp_def->default_available) r = opp_disable(dev, opp_def->freq); if (r) - dev_err(dev, "%s: disable %ld failed for %s " - "[%d] result=%d\n", + dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n", __func__, opp_def->freq, opp_def->hwmod_name, i, r); } diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index 5037e76e4e2..a9e8cf21705 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -28,7 +28,7 @@ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 750805c528d..0e75ec3e114 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -26,7 +26,7 @@ * This is technically part of the OMAP2xxx clock code. */ -#include <plat/hardware.h> +#include <linux/kernel.h> #include "opp2xxx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index d95f3f945d4..75cef5f67a8 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,8 +19,6 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index c95415da23c..a9fd6d5fe79 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -20,8 +20,7 @@ */ #include <linux/module.h> -#include <plat/cpu.h> - +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 814bcd90159..3e1345fc071 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -28,7 +28,6 @@ #include <linux/slab.h> #include <plat/clock.h> -#include <plat/board.h> #include "powerdomain.h" #include "clockdomain.h" #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 9cb5cede0f5..939bd6f70b5 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -203,8 +203,8 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, bootup_volt = opp_get_voltage(opp); rcu_read_unlock(); if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding " - "to the bootup OPP for vdd_%s\n", __func__, vdd_name); + pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", + __func__, vdd_name); goto exit; } diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 2edeffc923a..8af6cd6ac33 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -29,6 +29,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -38,9 +39,6 @@ #include <plat/clock.h> #include <plat/sram.h> #include <plat/dma.h> -#include <plat/board.h> - -#include <mach/irqs.h> #include "common.h" #include "prm2xxx_3xxx.h" @@ -352,16 +350,6 @@ int __init omap2_pm_init(void) prcm_setup_regs(); - /* Hack to prevent MPU retention when STI console is enabled. */ - { - const struct omap_sti_console_config *sti; - - sti = omap_get_config(OMAP_TAG_STI_CONSOLE, - struct omap_sti_console_config); - if (sti != NULL && sti->enable) - sti_console_enabled = 1; - } - /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 05bd8f02723..ba670db1fd3 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,8 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/platform_data/gpio-omap.h> + #include <trace/events/power.h> #include <asm/suspend.h> @@ -389,9 +391,8 @@ restore: list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - pr_info("Powerdomain (%s) didn't enter " - "target state %d\n", - pwrst->pwrdm->name, pwrst->next_state); + pr_info("Powerdomain (%s) didn't enter target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); @@ -731,8 +732,7 @@ int __init omap3_pm_init(void) omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); if (!omap3_secure_ram_storage) - pr_err("Memory allocation failed when " - "allocating for secure sram context\n"); + pr_err("Memory allocation failed when allocating for secure sram context\n"); local_irq_disable(); local_fiq_disable(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index ea24174f570..04922d14906 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -69,9 +69,8 @@ static int omap4_pm_suspend(void) list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - pr_info("Powerdomain (%s) didn't enter " - "target state %d\n", - pwrst->pwrdm->name, pwrst->next_state); + pr_info("Powerdomain (%s) didn't enter target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); @@ -189,8 +188,7 @@ int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { - pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 " - "wakeup dependency\n"); + pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); goto err2; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 69b36e185e9..1678a328423 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -28,11 +28,13 @@ #include "prm44xx.h" #include <asm/cpu.h> -#include <plat/cpu.h> + +#include <plat/prcm.h> + #include "powerdomain.h" #include "clockdomain.h" -#include <plat/prcm.h> +#include "soc.h" #include "pm.h" #define PWRDM_TRACE_STATES_FLAG (1<<31) @@ -339,8 +341,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) if (!pwrdm || !clkdm) return -EINVAL; - pr_debug("powerdomain: associating clockdomain %s with powerdomain " - "%s\n", clkdm->name, pwrdm->name); + pr_debug("powerdomain: %s: associating clockdomain %s\n", + pwrdm->name, clkdm->name); for (i = 0; i < PWRDM_MAX_CLKDMS; i++) { if (!pwrdm->pwrdm_clkdms[i]) @@ -354,8 +356,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) } if (i == PWRDM_MAX_CLKDMS) { - pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for " - "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name); + pr_debug("powerdomain: %s: increase PWRDM_MAX_CLKDMS for clkdm %s\n", + pwrdm->name, clkdm->name); WARN_ON(1); ret = -ENOMEM; goto pac_exit; @@ -387,16 +389,16 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) if (!pwrdm || !clkdm) return -EINVAL; - pr_debug("powerdomain: dissociating clockdomain %s from powerdomain " - "%s\n", clkdm->name, pwrdm->name); + pr_debug("powerdomain: %s: dissociating clockdomain %s\n", + pwrdm->name, clkdm->name); for (i = 0; i < PWRDM_MAX_CLKDMS; i++) if (pwrdm->pwrdm_clkdms[i] == clkdm) break; if (i == PWRDM_MAX_CLKDMS) { - pr_debug("powerdomain: clkdm %s not associated with pwrdm " - "%s ?!\n", clkdm->name, pwrdm->name); + pr_debug("powerdomain: %s: clkdm %s not associated?!\n", + pwrdm->name, clkdm->name); ret = -ENOENT; goto pdc_exit; } @@ -485,7 +487,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) if (!(pwrdm->pwrsts & (1 << pwrst))) return -EINVAL; - pr_debug("powerdomain: setting next powerstate for %s to %0x\n", + pr_debug("powerdomain: %s: setting next powerstate to %0x\n", pwrdm->name, pwrst); if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { @@ -587,7 +589,7 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst))) return -EINVAL; - pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n", + pr_debug("powerdomain: %s: setting next logic powerstate to %0x\n", pwrdm->name, pwrst); if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst) @@ -624,8 +626,8 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst))) return -EINVAL; - pr_debug("powerdomain: setting next memory powerstate for domain %s " - "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst); + pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-ON to %0x\n", + pwrdm->name, bank, pwrst); if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst) ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst); @@ -662,8 +664,8 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst))) return -EINVAL; - pr_debug("powerdomain: setting next memory powerstate for domain %s " - "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst); + pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-RET to %0x\n", + pwrdm->name, bank, pwrst); if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst) ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst); @@ -841,7 +843,7 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) * warn & fail if it is not ON. */ - pr_debug("powerdomain: clearing previous power state reg for %s\n", + pr_debug("powerdomain: %s: clearing previous power state reg\n", pwrdm->name); if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst) @@ -871,8 +873,7 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) return ret; - pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", - pwrdm->name); + pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", pwrdm->name); if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar) ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm); @@ -901,8 +902,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) return ret; - pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", - pwrdm->name); + pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", pwrdm->name); if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar) ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm); diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index 0f0a9f1592f..3950ccfe5f4 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -122,8 +122,8 @@ static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) udelay(1); if (c > PWRDM_TRANSITION_BAILOUT) { - printk(KERN_ERR "powerdomain: waited too long for " - "powerdomain %s to complete transition\n", pwrdm->name); + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); return -EAGAIN; } diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c index 601325b852a..aeac6f35ca1 100644 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ b/arch/arm/mach-omap2/powerdomain44xx.c @@ -198,8 +198,8 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) udelay(1); if (c > PWRDM_TRANSITION_BAILOUT) { - printk(KERN_ERR "powerdomain: waited too long for " - "powerdomain %s to complete transition\n", pwrdm->name); + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); return -EAGAIN; } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index bb883e46307..8b23d234fb5 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -15,11 +15,9 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" - #include "prcm-common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 053e24ed3c4..0f51e034e0a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -27,7 +27,6 @@ #include "common.h" #include <plat/prcm.h> -#include <plat/irqs.h> #include "clock.h" #include "clock2xxx.h" @@ -140,11 +139,11 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, MAX_MODULE_ENABLE_WAIT, i); if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("cm: Module associated with clock %s ready after %d " - "loops\n", name, i); + pr_debug("cm: Module associated with clock %s ready after %d loops\n", + name, i); else - pr_err("cm: Module associated with clock %s didn't enable in " - "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + pr_err("cm: Module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; }; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index a0309dea679..9529984d8d2 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -17,11 +17,10 @@ #include <linux/io.h> #include <linux/irq.h> -#include "common.h" -#include <plat/cpu.h> #include <plat/prcm.h> -#include <plat/irqs.h> +#include "soc.h" +#include "common.h" #include "vp.h" #include "prm2xxx_3xxx.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .nr_regs = 1, .irqs = omap3_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = INT_34XX_PRCM_MPU_IRQ, + .irq = 11 + OMAP_INTC_START, .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index bb727c2d933..f0c4d5f4a17 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,10 +17,9 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/irqs.h> #include <plat/prcm.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "vp.h" @@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .nr_regs = 2, .irqs = omap4_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), - .irq = OMAP44XX_IRQ_PRCM, + .irq = 11 + OMAP44XX_IRQ_GIC_START, .read_pending_irqs = &omap44xx_prm_read_pending_irqs, .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 03b126d9ad9..6b4d332be2f 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -26,7 +26,6 @@ #include <plat/common.h> #include <plat/prcm.h> -#include <plat/irqs.h> #include "prm2xxx_3xxx.h" #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 1133bb2f632..73e55e48532 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,11 +24,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/hardware.h> #include <plat/clock.h> #include <plat/sram.h> #include <plat/sdrc.h> +#include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c1b93c752d7..0405c819080 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -29,11 +29,11 @@ #include <plat/omap-serial.h> #include "common.h" -#include <plat/board.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> +#include <plat/serial.h> #include "prm2xxx_3xxx.h" #include "pm.h" @@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); if (!od) @@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) * in Smartidle Mode When Configured for DMA Operations. * WA: configure uart in force idle mode. */ -static void omap_uart_set_noidle(struct platform_device *pdev) +static void omap_uart_set_noidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_smartidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); u8 idlemode; @@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) } #else -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_smartidle(struct platform_device *pdev) {} +static void omap_uart_set_noidle(struct device *dev) {} +static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -229,9 +232,8 @@ static int __init omap_serial_early_init(void) if (console_loglevel >= 10) { uart_debug = true; - pr_info("%s used as console in debug mode" - " uart%d clocks will not be" - " gated", uart_name, uart->num); + pr_info("%s used as console in debug mode: uart%d clocks will not be gated", + uart_name, uart->num); } if (cmdline_find_option("no_console_suspend")) @@ -304,6 +306,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_timeout = info->dma_rx_timeout; omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; + omap_up.DTR_gpio = info->DTR_gpio; + omap_up.DTR_inverted = info->DTR_inverted; + omap_up.DTR_present = info->DTR_present; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); @@ -313,8 +318,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size, NULL, 0, false); - WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n", - name, oh->name); + if (IS_ERR(pdev)) { + WARN(1, "Could not build omap_device for %s: %s.\n", name, + oh->name); + return; + } if ((console_uart_id == bdata->id) && no_console_suspend) omap_device_disable_idle_on_suspend(pdev); diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index d4bf904d84a..ce0ccd26efb 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,8 +28,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <plat/omap24xx.h> - +#include "omap24xx.h" #include "sdrc.h" /* First address of reserved address space? apparently valid for OMAP2 & 3 */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 1f62f23673f..506987979c1 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,9 +26,9 @@ #include <asm/assembler.h> -#include <plat/hardware.h> #include <plat/sram.h> +#include "omap34xx.h" #include "iomap.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 91e71d8f46f..88ff83a0942 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -14,10 +14,10 @@ #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> -#include <plat/omap44xx.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" #include "common.h" +#include "omap44xx.h" #include "omap4-sar-layout.h" #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h new file mode 100644 index 00000000000..fc9b96daf85 --- /dev/null +++ b/arch/arm/mach-omap2/soc.h @@ -0,0 +1,7 @@ +#include <plat/cpu.h> +#include "omap24xx.h" +#include "omap34xx.h" +#include "omap44xx.h" +#include "ti81xx.h" +#include "am33xx.h" +#include "omap54xx.h" diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d033a65f4e4..cbeae56b56a 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -104,16 +104,15 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL); if (!sr_data) { - pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n", - __func__, oh->name); + pr_err("%s: Unable to allocate memory for %s sr_data\n", + __func__, oh->name); return -ENOMEM; } sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { - pr_err("%s: No voltage domain specified for %s." - "Cannot initialize\n", __func__, - oh->name); + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); goto exit; } @@ -131,8 +130,8 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) omap_voltage_get_volttable(sr_data->voltdm, &volt_data); if (!volt_data) { - pr_warning("%s: No Voltage table registered fo VDD%d." - "Something really wrong\n\n", __func__, i + 1); + pr_err("%s: No Voltage table registered for VDD%d\n", + __func__, i + 1); goto exit; } diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index ee0bfcc1410..8f7326cd435 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d4d39ef0476..b140d657852 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -32,8 +32,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index df5a21322b0..2d0ceaa23fb 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -29,8 +29,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "soc.h" #include "iomap.h" #include "sdrc.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f7842..8f9843f7842 100644 --- a/arch/arm/plat-omap/include/plat/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ba4f57dda8..5214d5bfba2 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -38,14 +38,16 @@ #include <linux/slab.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include "common.h" + #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/dmtimer.h> #include <plat/omap-pm.h> +#include "soc.h" +#include "common.h" #include "powerdomain.h" /* Parent clocks, eventually these will come from the clock framework */ @@ -211,7 +213,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); BUG_ON(res); - omap2_gp_timer_irq.dev_id = (void *)&clkev; + omap2_gp_timer_irq.dev_id = &clkev; setup_irq(clkev.irq, &omap2_gp_timer_irq); __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); @@ -380,8 +382,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, - OMAP44XX_IRQ_LOCALTIMER); + OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); #endif static void __init omap4_timer_init(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index db5ff664237..99be94e9454 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -29,6 +29,7 @@ #include <plat/i2c.h> #include <plat/usb.h> +#include "soc.h" #include "twl-common.h" #include "pm.h" #include "voltage.h" @@ -84,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type, omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); - omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; omap4_i2c1_board_info[0].platform_data = pmic_data; /* TWL6040 audio IC part */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 8fe71cfd002..d109c09ef34 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,7 +1,7 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ -#include <plat/irqs.h> +#include "common.h" #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) @@ -40,13 +40,13 @@ void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); + omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } static inline void omap3_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) { - omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); + omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); } void omap4_pmic_init(const char *pmic_type, diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index dde8a11f47d..ac95daaa470 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,8 +25,6 @@ #include <asm/io.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <plat/usb.h> #include <plat/omap_device.h> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index c4a57685666..136c64bc902 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -23,14 +23,13 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/io.h> - #include <linux/usb/musb.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/am35xx.h> #include <plat/usb.h> #include <plat/omap_device.h> + +#include "am35xx.h" + #include "mux.h" static struct musb_hdrc_config musb_config = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 84da34f9a7c..880249b1701 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -12,8 +12,7 @@ #include <linux/init.h> #include <linux/bug.h> -#include <plat/cpu.h> - +#include "soc.h" #include "voltage.h" #include "vc.h" #include "prm-regbits-34xx.h" @@ -116,9 +115,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, } if (!voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, voltdm->name); + pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n", + __func__, voltdm->name); return -ENODATA; } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 4dc60e83e00..3ac8fe1d821 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -195,8 +195,8 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return &voltdm->volt_data[i]; } - pr_notice("%s: Unable to match the current voltage with the voltage" - "table for vdd_%s\n", __func__, voltdm->name); + pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n", + __func__, voltdm->name); return ERR_PTR(-ENODATA); } @@ -249,8 +249,8 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, voltdm->scale = omap_vc_bypass_scale; return; default: - pr_warning("%s: Trying to change the method of voltage scaling" - "to an unsupported one!\n", __func__); + pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n", + __func__); } } @@ -331,8 +331,8 @@ int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) if (!voltdm || !pwrdm) return -EINVAL; - pr_debug("voltagedomain: associating powerdomain %s with voltagedomain " - "%s\n", pwrdm->name, voltdm->name); + pr_debug("voltagedomain: %s: associating powerdomain %s\n", + voltdm->name, pwrdm->name); list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 0ac2caf1594..7283b7ed7de 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,7 +16,7 @@ #include <linux/err.h> -#include <plat/voltage.h> +#include <linux/platform_data/voltage-omap.h> #include "vc.h" #include "vp.h" diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index d0103c80d04..63afbfed3cb 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -18,9 +18,8 @@ #include <linux/err.h> #include <linux/init.h> +#include "soc.h" #include "common.h" -#include <plat/cpu.h> - #include "prm-regbits-34xx.h" #include "omap_opp_data.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index f95c1bad9dc..85241b828c0 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -138,8 +138,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, udelay(1); } if (timeout >= VP_TRANXDONE_TIMEOUT) { - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, voltdm->name); + pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted", + __func__, voltdm->name); return -ETIMEDOUT; } @@ -157,9 +157,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, omap_test_timeout(vp->common->ops->check_txdone(vp->id), VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_err("%s: vdd_%s TRANXDONE timeout exceeded." - "TRANXDONE never got set after the voltage update\n", - __func__, voltdm->name); + pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n", + __func__, voltdm->name); omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); @@ -176,8 +175,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, } if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" - "to clear the TRANXDONE status\n", + pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n", __func__, voltdm->name); /* Clear force bit */ @@ -257,8 +255,8 @@ void omap_vp_disable(struct voltagedomain *voltdm) /* If VP is already disabled, do nothing. Return */ if (!vp->enabled) { - pr_warning("%s: Trying to disable VP for vdd_%s when" - "it is already disabled\n", __func__, voltdm->name); + pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n", + __func__, voltdm->name); return; } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 410291c6766..87a6cdabcad 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -47,16 +47,6 @@ static struct map_desc orion5x_io_desc[] __initdata = { .length = ORION5X_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), - .length = ORION5X_PCIE_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ORION5X_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), - .length = ORION5X_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { .virtual = ORION5X_PCIE_WA_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), .length = ORION5X_PCIE_WA_SIZE, diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h deleted file mode 100644 index 1aa5d0a50a0..00000000000 --- a/arch/arm/mach-orion5x/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include <mach/orion5x.h> -#include <asm/sizes.h> - -#define IO_SPACE_LIMIT SZ_2M -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 683e085ce16..1b60131b7f6 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -31,31 +31,29 @@ * fc000000 device bus mappings (cs0/cs1) * * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) + * fe000000 f1000000 1M on-chip peripheral registers + * fee00000 f2000000 64K PCIe I/O space + * fee10000 f2100000 64K PCI I/O space + * fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_VIRT_BASE 0xfe000000 #define ORION5X_REGS_SIZE SZ_1M #define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 #define ORION5X_PCIE_IO_BUS_BASE 0x00000000 -#define ORION5X_PCIE_IO_SIZE SZ_1M +#define ORION5X_PCIE_IO_SIZE SZ_64K #define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION5X_PCI_IO_BUS_BASE 0x00100000 -#define ORION5X_PCI_IO_SIZE SZ_1M +#define ORION5X_PCI_IO_BUS_BASE 0x00010000 +#define ORION5X_PCI_IO_SIZE SZ_64K #define ORION5X_SRAM_PHYS_BASE (0xf2200000) #define ORION5X_SRAM_SIZE SZ_8K /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000 #define ORION5X_PCIE_WA_SIZE SZ_16M #define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index cb19e1661bb..6921d49b988 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -162,35 +162,25 @@ static int __init pcie_setup(struct pci_sys_data *sys) pcie_ops.read = pcie_rd_conf_wa; } + pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE); + /* * Request resources. */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("pcie_setup unable to alloc resources"); /* - * IORESOURCE_IO - */ - sys->io_offset = 0; - res[0].name = "PCIe I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION5X_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - - /* * IORESOURCE_MEM */ - res[1].name = "PCIe Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) + res->name = "PCIe Memory Space"; + res->flags = IORESOURCE_MEM; + res->start = ORION5X_PCIE_MEM_PHYS_BASE; + res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, res)) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } @@ -489,35 +479,25 @@ static int __init pci_setup(struct pci_sys_data *sys) */ orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE); + /* * Request resources */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("pci_setup unable to alloc resources"); /* - * IORESOURCE_IO - */ - sys->io_offset = 0; - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION5X_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - - /* * IORESOURCE_MEM */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION5X_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) + res->name = "PCI Memory Space"; + res->flags = IORESOURCE_MEM; + res->start = ORION5X_PCI_MEM_PHYS_BASE; + res->end = res->start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, res)) panic("Request PCI Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile deleted file mode 100644 index 777564c90a1..00000000000 --- a/arch/arm/mach-pnx4008/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o -obj-m := -obj-n := -obj- := - -# Power Management -obj-$(CONFIG_PM) += pm.o sleep.o - diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot deleted file mode 100644 index 9fa19baa7f2..00000000000 --- a/arch/arm/mach-pnx4008/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 - diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c deleted file mode 100644 index a4a3819c96c..00000000000 --- a/arch/arm/mach-pnx4008/clock.c +++ /dev/null @@ -1,1001 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.c - * - * Clock control driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * Generic clock management functions are partially based on: - * linux/arch/arm/mach-omap/clock.c - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/clock.h> -#include "clock.h" - -/*forward declaration*/ -static struct clk per_ck; -static struct clk hclk_ck; -static struct clk ck_1MHz; -static struct clk ck_13MHz; -static struct clk ck_pll1; -static int local_set_rate(struct clk *clk, u32 rate); - -static inline void clock_lock(void) -{ - local_irq_disable(); -} - -static inline void clock_unlock(void) -{ - local_irq_enable(); -} - -static void propagate_rate(struct clk *clk) -{ - struct clk *tmp_clk; - - tmp_clk = clk; - while (tmp_clk->propagate_next) { - tmp_clk = tmp_clk->propagate_next; - local_set_rate(tmp_clk, tmp_clk->user_rate); - } -} - -static void clk_reg_disable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) & - ~(1 << clk->enable_shift), clk->enable_reg); -} - -static int clk_reg_enable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) | - (1 << clk->enable_shift), clk->enable_reg); - return 0; -} - -static inline void clk_reg_disable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) & - ~(1 << clk->enable_shift1), clk->enable_reg1); -} - -static inline void clk_reg_enable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) | - (1 << clk->enable_shift1), clk->enable_reg1); -} - -static int clk_wait_for_pll_lock(struct clk *clk) -{ - int i; - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */ - - if (!(__raw_readl(clk->scale_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to lock, scale reg data: %x\n", - clk->name, __raw_readl(clk->scale_reg)); - return -1; - } - return 0; -} - -static int switch_to_dirty_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */ - if (!(tmp_reg & 1)) { - tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */ - - if (!(__raw_readl(clk->parent_switch_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int switch_to_clean_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */ - if (tmp_reg & 1) { - tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */ - - if (__raw_readl(clk->parent_switch_reg) & 1) { - printk(KERN_ERR - "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int set_13MHz_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - - if (parent == &ck_13MHz) - ret = switch_to_clean_13mhz(clk); - else if (parent == &ck_pll1) - ret = switch_to_dirty_13mhz(clk); - - return ret; -} - -#define PLL160_MIN_FCCO 156000 -#define PLL160_MAX_FCCO 320000 - -/* - * Calculate pll160 settings. - * Possible input: up to 320MHz with step of clk->parent->rate. - * In PNX4008 parent rate for pll160s may be either 1 or 13MHz. - * Ignored paths: "feedback" (bit 13 set), "div-by-N". - * Setting ARM PLL4 rate to 0 will put CPU into direct run mode. - * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input. - * Please refer to PNX4008 IC manual for details. - */ - -static int pll160_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp_reg, tmp_m, tmp_2p, i; - u32 parent_rate; - int ret = -EINVAL; - - parent_rate = clk->parent->rate; - - if (!parent_rate) - goto out; - - /* set direct run for ARM or disable output for others */ - clk_reg_disable(clk); - - /* disable source input as well (ignored for ARM) */ - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - - rate -= rate % parent_rate; /*round down the input */ - - if (rate > PLL160_MAX_FCCO) - rate = PLL160_MAX_FCCO; - - if (!rate) { - clk->rate = 0; - ret = 0; - goto out; - } - - clk_reg_enable1(clk); - tmp_reg = __raw_readl(clk->scale_reg); - - if (rate == parent_rate) { - /*enter direct bypass mode */ - tmp_reg |= ((1 << 14) | (1 << 15)); - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = parent_rate; - clk_reg_enable(clk); - ret = 0; - goto out; - } - - i = 0; - for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) { - if (rate * tmp_2p >= PLL160_MIN_FCCO) - break; - i++; - } - - if (tmp_2p > 1) - tmp_reg |= ((i - 1) << 11); - else - tmp_reg |= (1 << 14); /*direct mode, no divide */ - - tmp_m = rate * tmp_2p; - tmp_m /= parent_rate; - - tmp_reg |= (tmp_m - 1) << 1; /*calculate M */ - tmp_reg |= (1 << 16); /*power up PLL */ - __raw_writel(tmp_reg, clk->scale_reg); - - if (clk_wait_for_pll_lock(clk) < 0) { - clk_reg_disable(clk); - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = 0; - ret = -EFAULT; - goto out; - } - - clk->rate = (tmp_m * parent_rate) / tmp_2p; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); - - clk_reg_enable(clk); - ret = 0; - -out: - return ret; -} - -/*configure PER_CLK*/ -static int per_clk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - - tmp = __raw_readl(clk->scale_reg); - tmp &= ~(0x1f << 2); - tmp |= ((clk->parent->rate / clk->rate) - 1) << 2; - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -/*configure HCLK*/ -static int hclk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - tmp = __raw_readl(clk->scale_reg); - tmp = tmp & ~0x3; - switch (rate) { - case 1: - break; - case 2: - tmp |= 1; - break; - case 4: - tmp |= 2; - break; - } - - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -static u32 hclk_round_rate(struct clk *clk, u32 rate) -{ - switch (rate) { - case 1: - case 4: - return rate; - } - return 2; -} - -static u32 per_clk_round_rate(struct clk *clk, u32 rate) -{ - return CLK_RATE_13MHZ; -} - -static int on_off_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_enable(clk); - clk->rate = 1; - } else { - clk_reg_disable(clk); - clk->rate = 0; - } - return 0; -} - -static int on_off_inv_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - clk->rate = 1; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - return 0; -} - -static u32 on_off_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? 1 : 0); -} - -static u32 pll4_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1) - rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ; - return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ))); -} - -static u32 pll3_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - return (rate - rate % CLK_RATE_13MHZ); -} - -static u32 pll5_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_48MHZ : 0); -} - -static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_13MHZ : 0); -} - -static int ck_13MHz_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - udelay(500); - clk->rate = CLK_RATE_13MHZ; - ck_1MHz.rate = CLK_RATE_1MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - ck_1MHz.rate = 0; - } - return 0; -} - -static int pll1_set_rate(struct clk *clk, u32 rate) -{ -#if 0 /* doesn't work on some boards, probably a HW BUG */ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - if (!clk_wait_for_pll_lock(clk)) { - clk->rate = CLK_RATE_13MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - - } else { - clk_reg_enable(clk); - clk->rate = 0; - } -#endif - return 0; -} - -/* Clock sources */ - -static struct clk osc_13MHz = { - .name = "osc_13MHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk ck_13MHz = { - .name = "ck_13MHz", - .parent = &osc_13MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &ck_13MHz_set_rate, - .enable_reg = OSC13CTRL_REG, - .enable_shift = 0, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk osc_32KHz = { - .name = "osc_32KHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_32KHZ, -}; - -/*attached to PLL5*/ -static struct clk ck_1MHz = { - .name = "ck_1MHz", - .flags = FIXED_RATE | PARENT_SET_RATE, - .parent = &ck_13MHz, -}; - -/* PLL1 (397) - provides 13' MHz clock */ -static struct clk ck_pll1 = { - .name = "ck_pll1", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &pll1_set_rate, - .enable_reg = PLLCTRL_REG, - .enable_shift = 1, - .scale_reg = PLLCTRL_REG, - .rate = CLK_RATE_13MHZ, -}; - -/* CPU/Bus PLL */ -static struct clk ck_pll4 = { - .name = "ck_pll4", - .parent = &ck_pll1, - .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION, - .propagate_next = &per_ck, - .round_rate = &pll4_round_rate, - .set_rate = &pll160_set_rate, - .rate = CLK_RATE_208MHZ, - .scale_reg = HCLKPLLCTRL_REG, - .enable_reg = PWRCTRL_REG, - .enable_shift = 2, - .parent_switch_reg = SYSCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -/* USB PLL */ -static struct clk ck_pll5 = { - .name = "ck_pll5", - .parent = &ck_1MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll5_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = USBCTRL_REG, - .enable_reg = USBCTRL_REG, - .enable_shift = 18, - .enable_reg1 = USBCTRL_REG, - .enable_shift1 = 17, -}; - -/* XPERTTeak DSP PLL */ -static struct clk ck_pll3 = { - .name = "ck_pll3", - .parent = &ck_pll1, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll3_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = DSPPLLCTRL_REG, - .enable_reg = DSPCLKCTRL_REG, - .enable_shift = 3, - .enable_reg1 = DSPCLKCTRL_REG, - .enable_shift1 = 2, - .parent_switch_reg = DSPCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -static struct clk hclk_ck = { - .name = "hclk_ck", - .parent = &ck_pll4, - .flags = PARENT_SET_RATE, - .set_rate = &hclk_set_rate, - .round_rate = &hclk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = 2, - .user_rate = 2, -}; - -static struct clk per_ck = { - .name = "per_ck", - .parent = &ck_pll4, - .flags = FIXED_RATE, - .propagate_next = &hclk_ck, - .set_rate = &per_clk_set_rate, - .round_rate = &per_clk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = CLK_RATE_13MHZ, - .user_rate = CLK_RATE_13MHZ, -}; - -static struct clk m2hclk_ck = { - .name = "m2hclk_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_inv_set_rate, - .rate = 1, - .enable_shift = 6, - .enable_reg = PWRCTRL_REG, -}; - -static struct clk vfp9_ck = { - .name = "vfp9_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 4, - .enable_reg = VFP9CLKCTRL_REG, -}; - -static struct clk keyscan_ck = { - .name = "keyscan_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = KEYCLKCTRL_REG, -}; - -static struct clk touch_ck = { - .name = "touch_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = TSCLKCTRL_REG, -}; - -static struct clk pwm1_ck = { - .name = "pwm1_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk pwm2_ck = { - .name = "pwm2_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 2, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk jpeg_ck = { - .name = "jpeg_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = JPEGCLKCTRL_REG, -}; - -static struct clk ms_ck = { - .name = "ms_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 5, - .enable_reg = MSCTRL_REG, -}; - -static struct clk dum_ck = { - .name = "dum_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DUMCLKCTRL_REG, -}; - -static struct clk flash_ck = { - .name = "flash_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, /* Only MLC clock supported */ - .enable_reg = FLASHCLKCTRL_REG, -}; - -static struct clk i2c0_ck = { - .name = "i2c0_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 0, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c1_ck = { - .name = "i2c1_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 1, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c2_ck = { - .name = "i2c2_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 2, - .enable_reg = USB_OTG_CLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk spi0_ck = { - .name = "spi0_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = SPICTRL_REG, -}; - -static struct clk spi1_ck = { - .name = "spi1_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 4, - .enable_reg = SPICTRL_REG, -}; - -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DMACLKCTRL_REG, -}; - -static struct clk uart3_ck = { - .name = "uart3_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 0, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart4_ck = { - .name = "uart4_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart5_ck = { - .name = "uart5_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 2, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart6_ck = { - .name = "uart6_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 3, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk wdt_ck = { - .name = "wdt_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .enable_shift = 0, - .enable_reg = TIMCLKCTRL_REG, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -/* These clocks are visible outside this module - * and can be initialized - */ -static struct clk *onchip_clks[] __initdata = { - &ck_13MHz, - &ck_pll1, - &ck_pll4, - &ck_pll5, - &ck_pll3, - &vfp9_ck, - &m2hclk_ck, - &hclk_ck, - &dma_ck, - &flash_ck, - &dum_ck, - &keyscan_ck, - &pwm1_ck, - &pwm2_ck, - &jpeg_ck, - &ms_ck, - &touch_ck, - &i2c0_ck, - &i2c1_ck, - &i2c2_ck, - &spi0_ck, - &spi1_ck, - &uart3_ck, - &uart4_ck, - &uart5_ck, - &uart6_ck, - &wdt_ck, -}; - -static struct clk_lookup onchip_clkreg[] = { - { .clk = &ck_13MHz, .con_id = "ck_13MHz" }, - { .clk = &ck_pll1, .con_id = "ck_pll1" }, - { .clk = &ck_pll4, .con_id = "ck_pll4" }, - { .clk = &ck_pll5, .con_id = "ck_pll5" }, - { .clk = &ck_pll3, .con_id = "ck_pll3" }, - { .clk = &vfp9_ck, .con_id = "vfp9_ck" }, - { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" }, - { .clk = &hclk_ck, .con_id = "hclk_ck" }, - { .clk = &dma_ck, .con_id = "dma_ck" }, - { .clk = &flash_ck, .con_id = "flash_ck" }, - { .clk = &dum_ck, .con_id = "dum_ck" }, - { .clk = &keyscan_ck, .con_id = "keyscan_ck" }, - { .clk = &pwm1_ck, .con_id = "pwm1_ck" }, - { .clk = &pwm2_ck, .con_id = "pwm2_ck" }, - { .clk = &jpeg_ck, .con_id = "jpeg_ck" }, - { .clk = &ms_ck, .con_id = "ms_ck" }, - { .clk = &touch_ck, .con_id = "touch_ck" }, - { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" }, - { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" }, - { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" }, - { .clk = &spi0_ck, .con_id = "spi0_ck" }, - { .clk = &spi1_ck, .con_id = "spi1_ck" }, - { .clk = &uart3_ck, .con_id = "uart3_ck" }, - { .clk = &uart4_ck, .con_id = "uart4_ck" }, - { .clk = &uart5_ck, .con_id = "uart5_ck" }, - { .clk = &uart6_ck, .con_id = "uart6_ck" }, - { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" }, -}; - -static void local_clk_disable(struct clk *clk) -{ - if (WARN_ON(clk->usecount == 0)) - return; - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) - clk->set_rate(clk, 0); - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk->usecount == 0) { - if (clk->parent) { - ret = local_clk_enable(clk->parent); - if (ret != 0) - goto out; - } - - if (clk->enable) - ret = clk->enable(clk); - else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) - ret = clk->set_rate(clk, clk->user_rate); - - if (ret != 0 && clk->parent) { - local_clk_disable(clk->parent); - goto out; - } - - clk->usecount++; - } -out: - return ret; -} - -static int local_set_rate(struct clk *clk, u32 rate) -{ - int ret = -EINVAL; - if (clk->set_rate) { - - if (clk->user_rate == clk->rate && clk->parent->rate) { - /* if clock enabled or rate not set */ - clk->user_rate = clk->round_rate(clk, rate); - ret = clk->set_rate(clk, clk->user_rate); - } else - clk->user_rate = clk->round_rate(clk, rate); - ret = 0; - } - return ret; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk->flags & FIXED_RATE) - goto out; - - clock_lock(); - if ((clk->flags & PARENT_SET_RATE) && clk->parent) { - - clk->user_rate = clk->round_rate(clk, rate); - /* parent clock needs to be refreshed - for the setting to take effect */ - } else { - ret = local_set_rate(clk, rate); - } - ret = 0; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_rate); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long ret; - clock_lock(); - ret = clk->rate; - clock_unlock(); - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_enable(struct clk *clk) -{ - int ret; - - clock_lock(); - ret = local_clk_enable(clk); - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - clock_lock(); - local_clk_disable(clk); - clock_unlock(); -} - -EXPORT_SYMBOL(clk_disable); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret; - clock_lock(); - if (clk->round_rate) - ret = clk->round_rate(clk, rate); - else - ret = clk->rate; - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -ENODEV; - if (!clk->set_parent) - goto out; - - clock_lock(); - ret = clk->set_parent(clk, parent); - if (!ret) - clk->parent = parent; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_parent); - -static int __init clk_init(void) -{ - struct clk **clkp; - - /* Disable autoclocking, as it doesn't seem to work */ - __raw_writel(0xff, AUTOCLK_CTRL); - - for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); - clkp++) { - struct clk *clk = *clkp; - if (clk->flags & NEEDS_INITIALIZATION) { - if (clk->set_rate) { - clk->user_rate = clk->rate; - local_set_rate(clk, clk->user_rate); - if (clk->set_parent) - clk->set_parent(clk, clk->parent); - } - if (clk->enable && clk->usecount) - clk->enable(clk); - if (clk->disable && !clk->usecount) - clk->disable(clk); - } - pr_debug("%s: clock %s, rate %ld\n", - __func__, clk->name, clk->rate); - } - - local_clk_enable(&ck_pll4); - - /* if ck_13MHz is not used, disable it. */ - if (ck_13MHz.usecount == 0) - local_clk_disable(&ck_13MHz); - - /* Disable autoclocking */ - __raw_writeb(0xff, AUTOCLK_CTRL); - - clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg)); - - return 0; -} - -arch_initcall(clk_init); diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h deleted file mode 100644 index 39720d6c0d0..00000000000 --- a/arch/arm/mach-pnx4008/clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.h - * - * Clock control driver for PNX4008 - internal header file - * - * Author: Vitaly Wool <source@mvista.com> - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ARCH_ARM_PNX4008_CLOCK_H__ -#define __ARCH_ARM_PNX4008_CLOCK_H__ - -struct clk { - const char *name; - struct clk *parent; - struct clk *propagate_next; - u32 rate; - u32 user_rate; - s8 usecount; - u32 flags; - u32 scale_reg; - u8 enable_shift; - u32 enable_reg; - u8 enable_shift1; - u32 enable_reg1; - u32 parent_switch_reg; - u32(*round_rate) (struct clk *, u32); - int (*set_rate) (struct clk *, u32); - int (*set_parent) (struct clk * clk, struct clk * parent); - int (*enable)(struct clk *); - void (*disable)(struct clk *); -}; - -/* Flags */ -#define RATE_PROPAGATES (1<<0) -#define NEEDS_INITIALIZATION (1<<1) -#define PARENT_SET_RATE (1<<2) -#define FIXED_RATE (1<<3) - -#endif diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c deleted file mode 100644 index a00d2f1254e..00000000000 --- a/arch/arm/mach-pnx4008/core.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * arch/arm/mach-pnx4008/core.c - * - * PNX4008 core startup code - * - * Authors: Vitaly Wool, Dmitry Chigirev, - * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include <mach/irq.h> -#include <mach/clock.h> -#include <mach/dma.h> - -struct resource spipnx_0_resources[] = { - { - .start = PNX4008_SPI1_BASE, - .end = PNX4008_SPI1_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI1_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI1_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - }, -}; - -struct resource spipnx_1_resources[] = { - { - .start = PNX4008_SPI2_BASE, - .end = PNX4008_SPI2_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI2_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI2_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - } -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static struct platform_device spipnx_1 = { - .name = "spipnx", - .id = 1, - .num_resources = ARRAY_SIZE(spipnx_0_resources), - .resource = spipnx_0_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct platform_device spipnx_2 = { - .name = "spipnx", - .id = 2, - .num_resources = ARRAY_SIZE(spipnx_1_resources), - .resource = spipnx_1_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct plat_serial8250_port platform_serial_ports[] = { - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)), - .mapbase = (unsigned long)PNX4008_UART5_BASE, - .irq = IIR5_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)), - .mapbase = (unsigned long)PNX4008_UART3_BASE, - .irq = IIR3_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - {} -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = &platform_serial_ports, - }, -}; - -static struct platform_device nand_flash_device = { - .name = "pnx4008-flash", - .id = -1, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32) 0; - -static struct resource ohci_resources[] = { - { - .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE), - .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100), - .flags = IORESOURCE_MEM, - }, { - .start = USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "pnx4008-usb-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static struct platform_device sdum_device = { - .name = "pnx4008-sdum", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device rgbfb_device = { - .name = "pnx4008-rgbfb", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - } -}; - -struct resource watchdog_resources[] = { - { - .start = PNX4008_WDOG_BASE, - .end = PNX4008_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device watchdog_device = { - .name = "pnx4008-watchdog", - .id = -1, - .num_resources = ARRAY_SIZE(watchdog_resources), - .resource = watchdog_resources, -}; - -static struct platform_device *devices[] __initdata = { - &spipnx_1, - &spipnx_2, - &serial_device, - &ohci_device, - &nand_flash_device, - &sdum_device, - &rgbfb_device, - &watchdog_device, -}; - - -extern void pnx4008_uart_init(void); - -static void __init pnx4008_init(void) -{ - /*disable all START interrupt sources, - and clear all START interrupt flags */ - __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT)); - __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - /* Switch on the UART clocks */ - pnx4008_uart_init(); -} - -static struct map_desc pnx4008_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(PNX4008_IRAM_BASE), - .pfn = __phys_to_pfn(PNX4008_IRAM_BASE), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE), - .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE), - .length = SZ_1M - SZ_128K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE), - .length = SZ_128K * 3, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE), - .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -void __init pnx4008_map_io(void) -{ - iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc)); -} - -static void pnx4008_restart(char mode, const char *cmd) -{ - soft_restart(0); -} - -#ifdef CONFIG_PM -extern int pnx4008_pm_init(void); -#else -static inline int pnx4008_pm_init(void) { return 0; } -#endif - -void __init pnx4008_init_late(void) -{ - pnx4008_pm_init(); -} - -extern struct sys_timer pnx4008_timer; - -MACHINE_START(PNX4008, "Philips PNX4008") - /* Maintainer: MontaVista Software Inc. */ - .atag_offset = 0x100, - .map_io = pnx4008_map_io, - .init_irq = pnx4008_init_irq, - .init_machine = pnx4008_init, - .init_late = pnx4008_init_late, - .timer = &pnx4008_timer, - .restart = pnx4008_restart, -MACHINE_END diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c deleted file mode 100644 index a4739e9fb2f..00000000000 --- a/arch/arm/mach-pnx4008/dma.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/dma.c - * - * PNX4008 DMA registration and IRQ dispatching - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * Based on the code from Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/dma-mapping.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gfp.h> - -#include <mach/hardware.h> -#include <mach/dma.h> -#include <asm/dma-mapping.h> -#include <mach/clock.h> - -static struct dma_channel { - char *name; - void (*irq_handler) (int, int, void *); - void *data; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - void *target_addr; - int target_id; -} dma_channels[MAX_DMA_CHANNELS]; - -static struct ll_pool { - void *vaddr; - void *cur; - dma_addr_t dma_addr; - int count; -} ll_pool; - -static DEFINE_SPINLOCK(ll_lock); - -struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma) -{ - struct pnx4008_dma_ll *ll = NULL; - unsigned long flags; - - spin_lock_irqsave(&ll_lock, flags); - if (ll_pool.count > 4) { /* can give one more */ - ll = *(struct pnx4008_dma_ll **) ll_pool.cur; - *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr); - *(void **)ll_pool.cur = **(void ***)ll_pool.cur; - memset(ll, 0, sizeof(*ll)); - ll_pool.count--; - } - spin_unlock_irqrestore(&ll_lock, flags); - - return ll; -} - -EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry); - -void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma) -{ - unsigned long flags; - - if (ll) { - if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) { - printk(KERN_ERR "Trying to free entry not allocated by DMA\n"); - BUG(); - } - - if (ll->flags & DMA_BUFFER_ALLOCATED) - ll->free(ll->alloc_data); - - spin_lock_irqsave(&ll_lock, flags); - *(long *)ll = *(long *)ll_pool.cur; - *(long *)ll_pool.cur = (long)ll; - ll_pool.count++; - spin_unlock_irqrestore(&ll_lock, flags); - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry); - -void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll) -{ - struct pnx4008_dma_ll *ptr; - u32 dma; - - while (ll) { - dma = ll->next_dma; - ptr = ll->next; - pnx4008_free_ll_entry(ll, ll_dma); - - ll_dma = dma; - ll = ptr; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll); - -static int dma_channels_requested = 0; - -static inline void dma_increment_usage(void) -{ - if (!dma_channels_requested++) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 1); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 1); - } -} -static inline void dma_decrement_usage(void) -{ - if (!--dma_channels_requested) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 0); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 0); - - } -} - -static DEFINE_SPINLOCK(dma_lock); - -static inline void pnx4008_dma_lock(void) -{ - spin_lock_irq(&dma_lock); -} - -static inline void pnx4008_dma_unlock(void) -{ - spin_unlock_irq(&dma_lock); -} - -#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS)) - -int pnx4008_request_channel(char *name, int ch, - void (*irq_handler) (int, int, void *), void *data) -{ - int i, found = 0; - - /* basic sanity checks */ - if (!name || (ch != -1 && !VALID_CHANNEL(ch))) - return -EINVAL; - - pnx4008_dma_lock(); - - /* try grabbing a DMA channel with the requested priority */ - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - if (!dma_channels[i].name && (ch == -1 || ch == i)) { - found = 1; - break; - } - } - - if (found) { - dma_increment_usage(); - dma_channels[i].name = name; - dma_channels[i].irq_handler = irq_handler; - dma_channels[i].data = data; - dma_channels[i].ll = NULL; - dma_channels[i].ll_dma = 0; - } else { - printk(KERN_WARNING "No more available DMA channels for %s\n", - name); - i = -ENODEV; - } - - pnx4008_dma_unlock(); - return i; -} - -EXPORT_SYMBOL_GPL(pnx4008_request_channel); - -void pnx4008_free_channel(int ch) -{ - if (!dma_channels[ch].name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, ch); - return; - } - - pnx4008_dma_lock(); - pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll); - dma_channels[ch].ll = NULL; - dma_decrement_usage(); - - dma_channels[ch].name = NULL; - pnx4008_dma_unlock(); -} - -EXPORT_SYMBOL_GPL(pnx4008_free_channel); - -int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable) -{ - unsigned long dma_cfg = __raw_readl(DMAC_CONFIG); - - switch (ahb_m1_be) { - case 0: - dma_cfg &= ~(1 << 1); - break; - case 1: - dma_cfg |= (1 << 1); - break; - default: - break; - } - - switch (ahb_m2_be) { - case 0: - dma_cfg &= ~(1 << 2); - break; - case 1: - dma_cfg |= (1 << 2); - break; - default: - break; - } - - switch (enable) { - case 0: - dma_cfg &= ~(1 << 0); - break; - case 1: - dma_cfg |= (1 << 0); - break; - default: - break; - } - - pnx4008_dma_lock(); - __raw_writel(dma_cfg, DMAC_CONFIG); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_config_dma); - -int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl, - unsigned long *ctrl) -{ - int i = 0, dbsize, sbsize, err = 0; - - if (!ctrl || !ch_ctrl) { - err = -EINVAL; - goto out; - } - - *ctrl = 0; - - switch (ch_ctrl->tc_mask) { - case 0: - break; - case 1: - *ctrl |= (1 << 31); - break; - - default: - err = -EINVAL; - goto out; - } - - switch (ch_ctrl->cacheable) { - case 0: - break; - case 1: - *ctrl |= (1 << 30); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->bufferable) { - case 0: - break; - case 1: - *ctrl |= (1 << 29); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->priv_mode) { - case 0: - break; - case 1: - *ctrl |= (1 << 28); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->di) { - case 0: - break; - case 1: - *ctrl |= (1 << 27); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->si) { - case 0: - break; - case 1: - *ctrl |= (1 << 26); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dest_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 25); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->src_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 24); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dwidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 21); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 21); - *ctrl |= (1 << 21); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 21); - *ctrl |= (2 << 21); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->swidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 18); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 18); - *ctrl |= (1 << 18); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 18); - *ctrl |= (2 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - dbsize = ch_ctrl->dbsize; - while (!(dbsize & 1)) { - i++; - dbsize >>= 1; - } - if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 15); - *ctrl |= (i << 15); - - sbsize = ch_ctrl->sbsize; - while (!(sbsize & 1)) { - i++; - sbsize >>= 1; - } - if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 12); - *ctrl |= (i << 12); - - if (ch_ctrl->tr_size > 0x7ff) { - err = -E2BIG; - goto out; - } - *ctrl &= ~0x7ff; - *ctrl |= ch_ctrl->tr_size & 0x7ff; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control); - -int pnx4008_dma_parse_control(unsigned long ctrl, - struct pnx4008_dma_ch_ctrl * ch_ctrl) -{ - int err = 0; - - if (!ch_ctrl) { - err = -EINVAL; - goto out; - } - - ch_ctrl->tr_size = ctrl & 0x7ff; - ctrl >>= 12; - - ch_ctrl->sbsize = 1 << (ctrl & 7); - if (ch_ctrl->sbsize > 1) - ch_ctrl->sbsize <<= 1; - ctrl >>= 3; - - ch_ctrl->dbsize = 1 << (ctrl & 7); - if (ch_ctrl->dbsize > 1) - ch_ctrl->dbsize <<= 1; - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->swidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->swidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->swidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->dwidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->dwidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->dwidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - ch_ctrl->src_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->dest_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->si = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->di = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->priv_mode = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->bufferable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->cacheable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->tc_mask = ctrl & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control); - -int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg, - unsigned long *cfg) -{ - int err = 0; - - if (!cfg || !ch_cfg) { - err = -EINVAL; - goto out; - } - - *cfg = 0; - - switch (ch_cfg->halt) { - case 0: - break; - case 1: - *cfg |= (1 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->active) { - case 0: - break; - case 1: - *cfg |= (1 << 17); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->lock) { - case 0: - break; - case 1: - *cfg |= (1 << 16); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->itc) { - case 0: - break; - case 1: - *cfg |= (1 << 15); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->ie) { - case 0: - break; - case 1: - *cfg |= (1 << 14); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->flow_cntrl) { - case FC_MEM2MEM_DMA: - *cfg &= ~(7 << 11); - break; - case FC_MEM2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (1 << 11); - break; - case FC_PER2MEM_DMA: - *cfg &= ~(7 << 11); - *cfg |= (2 << 11); - break; - case FC_PER2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (3 << 11); - break; - case FC_PER2PER_DPER: - *cfg &= ~(7 << 11); - *cfg |= (4 << 11); - break; - case FC_MEM2PER_PER: - *cfg &= ~(7 << 11); - *cfg |= (5 << 11); - break; - case FC_PER2MEM_PER: - *cfg &= ~(7 << 11); - *cfg |= (6 << 11); - break; - case FC_PER2PER_SPER: - *cfg |= (7 << 11); - break; - - default: - err = -EINVAL; - goto out; - } - *cfg &= ~(0x1f << 6); - *cfg |= ((ch_cfg->dest_per & 0x1f) << 6); - - *cfg &= ~(0x1f << 1); - *cfg |= ((ch_cfg->src_per & 0x1f) << 1); - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config); - -int pnx4008_dma_parse_config(unsigned long cfg, - struct pnx4008_dma_ch_config * ch_cfg) -{ - int err = 0; - - if (!ch_cfg) { - err = -EINVAL; - goto out; - } - - cfg >>= 1; - - ch_cfg->src_per = cfg & 0x1f; - cfg >>= 5; - - ch_cfg->dest_per = cfg & 0x1f; - cfg >>= 5; - - switch (cfg & 7) { - case 0: - ch_cfg->flow_cntrl = FC_MEM2MEM_DMA; - break; - case 1: - ch_cfg->flow_cntrl = FC_MEM2PER_DMA; - break; - case 2: - ch_cfg->flow_cntrl = FC_PER2MEM_DMA; - break; - case 3: - ch_cfg->flow_cntrl = FC_PER2PER_DMA; - break; - case 4: - ch_cfg->flow_cntrl = FC_PER2PER_DPER; - break; - case 5: - ch_cfg->flow_cntrl = FC_MEM2PER_PER; - break; - case 6: - ch_cfg->flow_cntrl = FC_PER2MEM_PER; - break; - case 7: - ch_cfg->flow_cntrl = FC_PER2PER_SPER; - } - cfg >>= 3; - - ch_cfg->ie = cfg & 1; - cfg >>= 1; - - ch_cfg->itc = cfg & 1; - cfg >>= 1; - - ch_cfg->lock = cfg & 1; - cfg >>= 1; - - ch_cfg->active = cfg & 1; - cfg >>= 1; - - ch_cfg->halt = cfg & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config); - -void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - config->ch_ctrl &= ~0x7ff; - config->ch_ctrl |= new_len; - if (!config->is_ll) { - config->is_ll = 1; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = config->ll; - unsigned long ll_dma_old = config->ll_dma; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = config->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - config->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry); - -void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - cur_ll->ch_ctrl &= ~0x7ff; - cur_ll->ch_ctrl |= new_len; - if (!cur_ll->next) { - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = cur_ll->next; - unsigned long ll_dma_old = cur_ll->next_dma; - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - cur_ll->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry); - -int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch)); - __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch)); - - if (config->is_ll) - __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch)); - else - __raw_writel(0, DMAC_Cx_LLI(ch)); - - __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch)); - __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; - -} - -EXPORT_SYMBOL_GPL(pnx4008_config_channel); - -int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config) - return -EINVAL; - - pnx4008_dma_lock(); - config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch)); - - config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch)); - config->is_ll = config->ll_dma ? 1 : 0; - - config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch)); - config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_channel_get_config); - -int pnx4008_dma_ch_enable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg |= 1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable); - -int pnx4008_dma_ch_disable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg &= ~1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable); - -int pnx4008_dma_ch_enabled(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return ch_cfg & 1; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled); - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i; - unsigned long dint = __raw_readl(DMAC_INT_STAT); - unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT); - unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT); - unsigned long i_bit; - - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - i_bit = 1 << i; - if (dint & i_bit) { - struct dma_channel *channel = &dma_channels[i]; - - if (channel->name && channel->irq_handler) { - int cause = 0; - - if (eint & i_bit) - cause |= DMA_ERR_INT; - if (tcint & i_bit) - cause |= DMA_TC_INT; - channel->irq_handler(i, cause, channel->data); - } else { - /* - * IRQ for an unregistered DMA channel - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - if (tcint & i_bit) - __raw_writel(i_bit, DMAC_INT_TC_CLEAR); - if (eint & i_bit) - __raw_writel(i_bit, DMAC_INT_ERR_CLEAR); - } - } - return IRQ_HANDLED; -} - -static int __init pnx4008_dma_init(void) -{ - int ret, i; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - goto out; - } - - ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll); - ll_pool.cur = ll_pool.vaddr = - dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll), - &ll_pool.dma_addr, GFP_KERNEL); - - if (!ll_pool.vaddr) { - ret = -ENOMEM; - free_irq(DMA_INT, NULL); - goto out; - } - - for (i = 0; i < ll_pool.count - 1; i++) { - void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll); - *addr = (void *)addr + sizeof(struct pnx4008_dma_ll); - } - *(long *)(ll_pool.vaddr + - (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) = - (long)ll_pool.vaddr; - - __raw_writel(1, DMAC_CONFIG); - -out: - return ret; -} -arch_initcall(pnx4008_dma_init); diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c deleted file mode 100644 index d3e71d3847b..00000000000 --- a/arch/arm/mach-pnx4008/gpio.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/mach-pnx4008/gpio.c - * - * PNX4008 GPIO driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/gpio-pnx4008.h> - -/* register definitions */ -#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) - -#define PIO_INP_STATE (0x00U) -#define PIO_OUTP_SET (0x04U) -#define PIO_OUTP_CLR (0x08U) -#define PIO_OUTP_STATE (0x0CU) -#define PIO_DRV_SET (0x10U) -#define PIO_DRV_CLR (0x14U) -#define PIO_DRV_STATE (0x18U) -#define PIO_SDINP_STATE (0x1CU) -#define PIO_SDOUTP_SET (0x20U) -#define PIO_SDOUTP_CLR (0x24U) -#define PIO_MUX_SET (0x28U) -#define PIO_MUX_CLR (0x2CU) -#define PIO_MUX_STATE (0x30U) - -static inline void gpio_lock(void) -{ - local_irq_disable(); -} - -static inline void gpio_unlock(void) -{ - local_irq_enable(); -} - -/* Inline functions */ -static inline int gpio_read_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - ret = (val & bit) ? 1 : 0; - } -out: - return ret; -} - -static inline int gpio_set_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - val |= bit; - __raw_writel(val, PIO_VA_BASE + reg); - ret = 0; - } -out: - return ret; -} - -/* Very simple access control, bitmap for allocated/free */ -static unsigned long access_map[4]; -#define INP_INDEX 0 -#define OUTP_INDEX 1 -#define GPIO_INDEX 2 -#define MUX_INDEX 3 - -/*GPIO to Input Mapping */ -static short gpio_to_inp_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, 10, 11, 12, 13, 14, 24, -1 -}; - -/*GPIO to Mux Mapping */ -static short gpio_to_mux_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 0, 1, 4, 5, -1 -}; - -/*Output to Mux Mapping */ -static short outp_to_mux_map[32] = { - -1, -1, -1, 6, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, 2, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 -}; - -int pnx4008_gpio_register_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EBUSY; /* Already in use */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISRAM(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISMUX(pin)) { - if (access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] |= bit; - - } else if (GPIO_ISOUT(pin)) { - if (access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] |= bit; - - } else if (GPIO_ISIN(pin)) { - if (access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] |= bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_register_pin); - -int pnx4008_gpio_unregister_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EFAULT; /* Not registered */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISRAM(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISMUX(pin)) { - if (~access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] &= ~bit; - } else if (GPIO_ISOUT(pin)) { - if (~access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] &= ~bit; - } else if (GPIO_ISIN(pin)) { - if (~access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] &= ~bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_unregister_pin); - -unsigned long pnx4008_gpio_read_pin(unsigned short pin) -{ - unsigned long ret = -EFAULT; - int gpio = GPIO_BIT_MASK(pin); - gpio_lock(); - if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) { - ret = gpio_read_bit(PIO_SDINP_STATE, gpio); - } - } else if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - if (ret > 0) - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - else if (ret == 0) - ret = - gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]); - } else if (GPIO_ISIN(pin)) { - ret = gpio_read_bit(PIO_INP_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin); - -/* Write Value to output */ -int pnx4008_gpio_write_pin(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISOUT(pin)) { - printk( "writing '%x' to '%x'\n", - gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR ); - ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_SDOUTP_SET : - PIO_SDOUTP_CLR, gpio); - } else if (GPIO_ISBID(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_OUTP_SET : - PIO_OUTP_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_write_pin); - -/* Value = 1 : Set GPIO pin as output */ -/* Value = 0 : Set GPIO pin as input */ -int pnx4008_gpio_set_pin_direction(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction); - -/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/ -int pnx4008_gpio_read_pin_direction(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction); - -/* Value = 1 : Set pin to muxed function */ -/* Value = 0 : Set pin as GPIO */ -int pnx4008_gpio_set_pin_mux(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux); - -/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/ -int pnx4008_gpio_read_pin_mux(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux); diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c deleted file mode 100644 index 550cfc2a1f2..00000000000 --- a/arch/arm/mach-pnx4008/i2c.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * I2C initialization for PNX4008. - * - * Author: Vitaly Wool <vitalywool@gmail.com> - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/clk.h> -#include <linux/i2c.h> -#include <linux/i2c-pnx.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <mach/platform.h> -#include <mach/irqs.h> - -static struct resource i2c0_resources[] = { - { - .start = PNX4008_I2C1_BASE, - .end = PNX4008_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_1_INT, - .end = I2C_1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = PNX4008_I2C2_BASE, - .end = PNX4008_I2C2_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_2_INT, - .end = I2C_2_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c2_resources[] = { - { - .start = PNX4008_USB_CONFIG_BASE + 0x300, - .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = USB_I2C_INT, - .end = USB_I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c0_device = { - .name = "pnx-i2c.0", - .id = 0, - .resource = i2c0_resources, - .num_resources = ARRAY_SIZE(i2c0_resources), -}; - -static struct platform_device i2c1_device = { - .name = "pnx-i2c.1", - .id = 1, - .resource = i2c1_resources, - .num_resources = ARRAY_SIZE(i2c1_resources), -}; - -static struct platform_device i2c2_device = { - .name = "pnx-i2c.2", - .id = 2, - .resource = i2c2_resources, - .num_resources = ARRAY_SIZE(i2c2_resources), -}; - -static struct platform_device *devices[] __initdata = { - &i2c0_device, - &i2c1_device, - &i2c2_device, -}; - -void __init pnx4008_register_i2c_devices(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h deleted file mode 100644 index 8d2a5ef52c9..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/clock.h - * - * Clock control driver for PNX4008 - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_CLOCK_H__ -#define __PNX4008_CLOCK_H__ - -struct module; -struct clk; - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) -#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) -#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) -#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) -#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) -#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) -#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) -#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) -#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) -#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) -#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) -#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) -#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) -#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) -#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) -#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc) -#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) -#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) -#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) -#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) -#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) -#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) -#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) - -#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) -#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) -#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) -#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) -#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) - -#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) - -#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) - -#define CLK_RATE_13MHZ 13000 -#define CLK_RATE_1MHZ 1000 -#define CLK_RATE_208MHZ 208000 -#define CLK_RATE_48MHZ 48000 -#define CLK_RATE_32KHZ 32 - -#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S deleted file mode 100644 index 469d60d97f5..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-pnx4008/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00090000 - add \rv, \rp, #0xf4000000 @ virtual - add \rp, \rp, #0x40000000 @ physical - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h deleted file mode 100644 index f094bf8bfb1..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/dma.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/dma.h - * - * PNX4008 DMA header file - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "platform.h" - -#define MAX_DMA_CHANNELS 8 - -#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) -#define DMAC_INT_STAT (DMAC_BASE + 0x0000) -#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) -#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) -#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) -#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) -#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) -#define DMAC_CONFIG (DMAC_BASE + 0x0030) -#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) -#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) -#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) -#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) -#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) - -enum { - WIDTH_BYTE = 0, - WIDTH_HWORD, - WIDTH_WORD -}; - -enum { - FC_MEM2MEM_DMA, - FC_MEM2PER_DMA, - FC_PER2MEM_DMA, - FC_PER2PER_DMA, - FC_PER2PER_DPER, - FC_MEM2PER_PER, - FC_PER2MEM_PER, - FC_PER2PER_SPER -}; - -enum { - DMA_INT_UNKNOWN = 0, - DMA_ERR_INT = 1, - DMA_TC_INT = 2, -}; - -enum { - DMA_BUFFER_ALLOCATED = 1, - DMA_HAS_LL = 2, -}; - -enum { - PER_CAM_DMA_1 = 0, - PER_NDF_FLASH = 1, - PER_MBX_SLAVE_FIFO = 2, - PER_SPI2_REC_XMIT = 3, - PER_MS_SD_RX_XMIT = 4, - PER_HS_UART_1_XMIT = 5, - PER_HS_UART_1_RX = 6, - PER_HS_UART_2_XMIT = 7, - PER_HS_UART_2_RX = 8, - PER_HS_UART_7_XMIT = 9, - PER_HS_UART_7_RX = 10, - PER_SPI1_REC_XMIT = 11, - PER_MLC_NDF_SREC = 12, - PER_CAM_DMA_2 = 13, - PER_PRNG_INFIFO = 14, - PER_PRNG_OUTFIFO = 15, -}; - -struct pnx4008_dma_ch_ctrl { - int tc_mask; - int cacheable; - int bufferable; - int priv_mode; - int di; - int si; - int dest_ahb1; - int src_ahb1; - int dwidth; - int swidth; - int dbsize; - int sbsize; - int tr_size; -}; - -struct pnx4008_dma_ch_config { - int halt; - int active; - int lock; - int itc; - int ie; - int flow_cntrl; - int dest_per; - int src_per; -}; - -struct pnx4008_dma_ll { - unsigned long src_addr; - unsigned long dest_addr; - u32 next_dma; - unsigned long ch_ctrl; - struct pnx4008_dma_ll *next; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -struct pnx4008_dma_config { - int is_ll; - unsigned long src_addr; - unsigned long dest_addr; - unsigned long ch_ctrl; - unsigned long ch_cfg; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); -extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); -extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); - -extern int pnx4008_request_channel(char *, int, - void (*)(int, int, void *), - void *); -extern void pnx4008_free_channel(int); -extern int pnx4008_config_dma(int, int, int); -extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, - unsigned long *); -extern int pnx4008_dma_parse_control(unsigned long, - struct pnx4008_dma_ch_ctrl *); -extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, - unsigned long *); -extern int pnx4008_dma_parse_config(unsigned long, - struct pnx4008_dma_ch_config *); -extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); -extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); -extern int pnx4008_dma_ch_enable(int); -extern int pnx4008_dma_ch_disable(int); -extern int pnx4008_dma_ch_enabled(int); -extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, - struct pnx4008_dma_ch_ctrl *); -extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, - struct pnx4008_dma_ch_ctrl *); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S deleted file mode 100644 index 77a55584671..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for PNX4008-based platforms - * - * 2005-2006 (c) MontaVista Software, Inc. - * Author: Vitaly Wool <vwool@ru.mvista.com> - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include "platform.h" - -#define IO_BASE 0xF0000000 -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#define INTRC_MASK 0x00 -#define INTRC_RAW_STAT 0x04 -#define INTRC_STAT 0x08 -#define INTRC_POLAR 0x0C -#define INTRC_ACT_TYPE 0x10 -#define INTRC_TYPE 0x14 - -#define SIC1_BASE_INT 32 -#define SIC2_BASE_INT 64 - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* decode the MIC interrupt numbers */ - ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) - ldr \irqstat, [\base, #INTRC_STAT] - - cmp \irqstat,#1<<16 - movhs \irqnr,#16 - movlo \irqnr,#0 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - -/* was there an interrupt ? if not then drop out with EQ status */ - teq \irqstat,#0 - beq 1003f - -/* and now check for extended IRQ reasons */ - cmp \irqnr,#1 - bls 1003f - cmp \irqnr,#30 - blo 1002f - -/* IRQ 31,30 : High priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ -/* set the base IRQ number */ - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - moveq \irqnr,#SIC1_BASE_INT - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - movne \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - and \irqstat,\irqstat,\tmp - b 1004f - -1003: -/* IRQ 1,0 : Low priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ -/* read the correct SIC */ -/* set the base IRQ number */ - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - movne \irqnr,#SIC1_BASE_INT - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - moveq \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - bic \irqstat,\irqstat,\tmp - -1004: - - cmp \irqstat,#1<<16 - addhs \irqnr,\irqnr,#16 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - - -/* is irqstat not zero */ - -1002: -/* we assert that irqstat is not equal to zero and return ne status if true*/ - teq \irqstat,#0 -1003: - .endm - diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h deleted file mode 100644 index 41027dd7cf7..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h - * - * PNX4008 GPIO driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _PNX4008_GPIO_H_ -#define _PNX4008_GPIO_H_ - - -/* Block numbers */ -#define GPIO_IN (0) -#define GPIO_OUT (0x100) -#define GPIO_BID (0x200) -#define GPIO_RAM (0x300) -#define GPIO_MUX (0x400) - -#define GPIO_TYPE_MASK(K) ((K) & 0x700) - -/* INPUT GPIOs */ -/* GPI */ -#define GPI_00 (GPIO_IN | 0) -#define GPI_01 (GPIO_IN | 1) -#define GPI_02 (GPIO_IN | 2) -#define GPI_03 (GPIO_IN | 3) -#define GPI_04 (GPIO_IN | 4) -#define GPI_05 (GPIO_IN | 5) -#define GPI_06 (GPIO_IN | 6) -#define GPI_07 (GPIO_IN | 7) -#define GPI_08 (GPIO_IN | 8) -#define GPI_09 (GPIO_IN | 9) -#define U1_RX (GPIO_IN | 15) -#define U2_HTCS (GPIO_IN | 16) -#define U2_RX (GPIO_IN | 17) -#define U3_RX (GPIO_IN | 18) -#define U4_RX (GPIO_IN | 19) -#define U5_RX (GPIO_IN | 20) -#define U6_IRRX (GPIO_IN | 21) -#define U7_HCTS (GPIO_IN | 22) -#define U7_RX (GPIO_IN | 23) -/* MISC IN */ -#define SPI1_DATIN (GPIO_IN | 25) -#define DISP_SYNC (GPIO_IN | 26) -#define SPI2_DATIN (GPIO_IN | 27) -#define GPI_11 (GPIO_IN | 28) - -#define GPIO_IN_MASK 0x1eff83ff - -/* OUTPUT GPIOs */ -/* GPO */ -#define GPO_00 (GPIO_OUT | 0) -#define GPO_01 (GPIO_OUT | 1) -#define GPO_02 (GPIO_OUT | 2) -#define GPO_03 (GPIO_OUT | 3) -#define GPO_04 (GPIO_OUT | 4) -#define GPO_05 (GPIO_OUT | 5) -#define GPO_06 (GPIO_OUT | 6) -#define GPO_07 (GPIO_OUT | 7) -#define GPO_08 (GPIO_OUT | 8) -#define GPO_09 (GPIO_OUT | 9) -#define GPO_10 (GPIO_OUT | 10) -#define GPO_11 (GPIO_OUT | 11) -#define GPO_12 (GPIO_OUT | 12) -#define GPO_13 (GPIO_OUT | 13) -#define GPO_14 (GPIO_OUT | 14) -#define GPO_15 (GPIO_OUT | 15) -#define GPO_16 (GPIO_OUT | 16) -#define GPO_17 (GPIO_OUT | 17) -#define GPO_18 (GPIO_OUT | 18) -#define GPO_19 (GPIO_OUT | 19) -#define GPO_20 (GPIO_OUT | 20) -#define GPO_21 (GPIO_OUT | 21) -#define GPO_22 (GPIO_OUT | 22) -#define GPO_23 (GPIO_OUT | 23) - -#define GPIO_OUT_MASK 0xffffff - -/* BIDIRECTIONAL GPIOs */ -/* RAM pins */ -#define RAM_D19 (GPIO_RAM | 0) -#define RAM_D20 (GPIO_RAM | 1) -#define RAM_D21 (GPIO_RAM | 2) -#define RAM_D22 (GPIO_RAM | 3) -#define RAM_D23 (GPIO_RAM | 4) -#define RAM_D24 (GPIO_RAM | 5) -#define RAM_D25 (GPIO_RAM | 6) -#define RAM_D26 (GPIO_RAM | 7) -#define RAM_D27 (GPIO_RAM | 8) -#define RAM_D28 (GPIO_RAM | 9) -#define RAM_D29 (GPIO_RAM | 10) -#define RAM_D30 (GPIO_RAM | 11) -#define RAM_D31 (GPIO_RAM | 12) - -#define GPIO_RAM_MASK 0x1fff - -/* I/O pins */ -#define GPIO_00 (GPIO_BID | 25) -#define GPIO_01 (GPIO_BID | 26) -#define GPIO_02 (GPIO_BID | 27) -#define GPIO_03 (GPIO_BID | 28) -#define GPIO_04 (GPIO_BID | 29) -#define GPIO_05 (GPIO_BID | 30) - -#define GPIO_BID_MASK 0x7e000000 - -/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ -#define GPIO_SDRAM_SEL (GPIO_MUX | 3) - -#define GPIO_MUX_MASK 0x8 - -/* Extraction/assembly macros */ -#define GPIO_BIT_MASK(K) ((K) & 0x1F) -#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) -#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) -#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) -#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) -#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) -#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 -#define SE_USB_OTG_ATX_INT_N 19 -/*18 unused*/ -#define SE_DSP_GPIO4_INT 17 -#define SE_KEY_IRQ 16 -#define SE_DSP_SLAVEPORT_INT 15 -#define SE_DSP_GPIO1_INT 14 -#define SE_DSP_GPIO0_INT 13 -#define SE_DSP_AHB_INT 12 -/*11-6 unused*/ -#define SE_GPIO_05_INT 5 -#define SE_GPIO_04_INT 4 -#define SE_GPIO_03_INT 3 -#define SE_GPIO_02_INT 2 -#define SE_GPIO_01_INT 1 -#define SE_GPIO_00_INT 0 - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern int pnx4008_gpio_register_pin(unsigned short pin); -extern int pnx4008_gpio_unregister_pin(unsigned short pin); -extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); -extern int pnx4008_gpio_write_pin(unsigned short pin, int output); -extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_direction(unsigned short pin); -extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_mux(unsigned short pin); - -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -#endif /* _PNX4008_GPIO_H_ */ diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h deleted file mode 100644 index 7b98b828d36..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include <mach/platform.h> - -/* Start of virtual addresses for IO devices */ -#define IO_BASE 0xF0000000 - -/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h deleted file mode 100644 index 2a690ca3387..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irq.h - * - * PNX4008 IRQ controller driver - header file - * this one is used in entry-arnv.S as well so it cannot contain C code - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __PNX4008_IRQ_H__ -#define __PNX4008_IRQ_H__ - -#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) -#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) -#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - -/* Manual: Chapter 20, page 195 */ - -#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) - -#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) -#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) -#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) -#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) -#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) -#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern void __init pnx4008_init_irq(void); - -#endif /* __PNX4008_IRQ_H__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h deleted file mode 100644 index f6b33cf23ae..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/irqs.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irqs.h - * - * PNX4008 IRQ controller driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_IRQS_h__ -#define __PNX4008_IRQS_h__ - -#define NR_IRQS 96 - -/*Manual: table 259, page 199*/ - -/*SUB2 Interrupt Routing (SIC2)*/ - -#define SIC2_BASE_INT 64 - -#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ -#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ -#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ -#define GPI_06_INT 92 -#define GPI_05_INT 91 -#define GPI_04_INT 90 -#define GPI_03_INT 89 -#define GPI_02_INT 88 -#define GPI_01_INT 87 -#define GPI_00_INT 86 -#define BT_CLKREQ_INT 85 -#define SPI1_DATIN_INT 84 -#define U5_RX_INT 83 -#define SDIO_INT_N 82 -#define CAM_HS_INT 81 -#define CAM_VS_INT 80 -#define GPI_07_INT 79 -#define DISP_SYNC_INT 78 -#define DSP_INT8 77 -#define U7_HCTS_INT 76 -#define GPI_10_INT 75 -#define GPI_09_INT 74 -#define GPI_08_INT 73 -#define DSP_INT7 72 -#define U2_HCTS_INT 71 -#define SPI2_DATIN_INT 70 -#define GPIO_05_INT 69 -#define GPIO_04_INT 68 -#define GPIO_03_INT 67 -#define GPIO_02_INT 66 -#define GPIO_01_INT 65 -#define GPIO_00_INT 64 - -/*Manual: table 258, page 198*/ - -/*SUB1 Interrupt Routing (SIC1)*/ - -#define SIC1_BASE_INT 32 - -#define USB_I2C_INT 63 -#define USB_DEV_HP_INT 62 -#define USB_DEV_LP_INT 61 -#define USB_DEV_DMA_INT 60 -#define USB_HOST_INT 59 -#define USB_OTG_ATX_INT_N 58 -#define USB_OTG_TIMER_INT 57 -#define SW_INT 56 -#define SPI1_INT 55 -#define KEY_IRQ 54 -#define DSP_M_INT 53 -#define RTC_INT 52 -#define I2C_1_INT 51 -#define I2C_2_INT 50 -#define PLL1_LOCK_INT 49 -#define PLL2_LOCK_INT 48 -#define PLL3_LOCK_INT 47 -#define PLL4_LOCK_INT 46 -#define PLL5_LOCK_INT 45 -#define SPI2_INT 44 -#define DSP_INT1 43 -#define DSP_INT2 42 -#define DSP_TDM_INT2 41 -#define TS_AUX_INT 40 -#define TS_IRQ 39 -#define TS_P_INT 38 -#define UOUT1_TO_PAD_INT 37 -#define GPI_11_INT 36 -#define DSP_INT4 35 -#define JTAG_COMM_RX_INT 34 -#define JTAG_COMM_TX_INT 33 -#define DSP_INT3 32 - -/*Manual: table 257, page 197*/ - -/*MAIN Interrupt Routing*/ - -#define MAIN_BASE_INT 0 - -#define SUB2_FIQ_N 31 /*active low */ -#define SUB1_FIQ_N 30 /*active low */ -#define JPEG_INT 29 -#define DMA_INT 28 -#define MSTIMER_INT 27 -#define IIR1_INT 26 -#define IIR2_INT 25 -#define IIR7_INT 24 -#define DSP_TDM_INT0 23 -#define DSP_TDM_INT1 22 -#define DSP_P_INT 21 -#define DSP_INT0 20 -#define DUM_INT 19 -#define UOUT0_TO_PAD_INT 18 -#define MP4_ENC_INT 17 -#define MP4_DEC_INT 16 -#define SD0_INT 15 -#define MBX_INT 14 -#define SD1_INT 13 -#define MS_INT_N 12 -#define FLASH_INT 11 /*NAND*/ -#define IIR6_INT 10 -#define IIR5_INT 9 -#define IIR4_INT 8 -#define IIR3_INT 7 -#define WATCH_INT 6 -#define HSTIMER_INT 5 -#define ARCH_TIMER_IRQ HSTIMER_INT -#define CAM_INT 4 -#define PRNG_INT 3 -#define CRYPTO_INT 2 -#define SUB2_IRQ_N 1 /*active low */ -#define SUB1_IRQ_N 0 /*active low */ - -#define PNX4008_IRQ_TYPES \ -{ /*IRQ #'s: */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ -} - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 - -#endif /* __PNX4008_IRQS_h__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h deleted file mode 100644 index 6ea02f2176b..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/param.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define HZ 100 diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h deleted file mode 100644 index 368c2c10a30..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/platform.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/platform.h - * - * PNX4008 Base addresses - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -#define PNX4008_IRAM_BASE 0x08000000 -#define PNX4008_IRAM_SIZE 0x00010000 -#define PNX4008_YUV_SLAVE_BASE 0x10000000 -#define PNX4008_DUM_SLAVE_BASE 0x18000000 -#define PNX4008_NDF_FLASH_BASE 0x20020000 -#define PNX4008_SPI1_BASE 0x20088000 -#define PNX4008_SPI2_BASE 0x20090000 -#define PNX4008_SD_CONFIG_BASE 0x20098000 -#define PNX4008_FLASH_DATA 0x200B0000 -#define PNX4008_MLC_FLASH_BASE 0x200B8000 -#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 -#define PNX4008_DMA_CONFIG_BASE 0x31000000 -#define PNX4008_USB_CONFIG_BASE 0x31020000 -#define PNX4008_SDRAM_CFG_BASE 0x31080000 -#define PNX4008_AHB2FAB_BASE 0x40000000 -#define PNX4008_PWRMAN_BASE 0x40004000 -#define PNX4008_INTCTRLMIC_BASE 0x40008000 -#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 -#define PNX4008_INTCTRLSIC2_BASE 0x40010000 -#define PNX4008_HSUART1_BASE 0x40014000 -#define PNX4008_HSUART2_BASE 0x40018000 -#define PNX4008_HSUART7_BASE 0x4001C000 -#define PNX4008_RTC_BASE 0x40024000 -#define PNX4008_PIO_BASE 0x40028000 -#define PNX4008_MSTIMER_BASE 0x40034000 -#define PNX4008_HSTIMER_BASE 0x40038000 -#define PNX4008_WDOG_BASE 0x4003C000 -#define PNX4008_DEBUG_BASE 0x40040000 -#define PNX4008_TOUCH1_BASE 0x40048000 -#define PNX4008_KEYSCAN_BASE 0x40050000 -#define PNX4008_UARTCTRL_BASE 0x40054000 -#define PNX4008_PWM_BASE 0x4005C000 -#define PNX4008_UART3_BASE 0x40080000 -#define PNX4008_UART4_BASE 0x40088000 -#define PNX4008_UART5_BASE 0x40090000 -#define PNX4008_UART6_BASE 0x40098000 -#define PNX4008_I2C1_BASE 0x400A0000 -#define PNX4008_I2C2_BASE 0x400A8000 -#define PNX4008_MAGICGATE_BASE 0x400B0000 -#define PNX4008_DUMCONF_BASE 0x400B8000 -#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 -#define PNX4008_DSP_BASE 0x400C0000 -#define PNX4008_PROFCOUNTER_BASE 0x400C8000 -#define PNX4008_CRYPTO_BASE 0x400D0000 -#define PNX4008_CAMIFCONF_BASE 0x400D8000 -#define PNX4008_YUV2RGB_BASE 0x400E0000 -#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h deleted file mode 100644 index 2fa685bff85..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/pm.h - * - * PNX4008 Power Management Routiness - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_PNX4008_PM_H -#define __ASM_ARCH_PNX4008_PM_H - -#ifndef __ASSEMBLER__ -#include "irq.h" -#include "irqs.h" -#include "clock.h" - -extern void pnx4008_pm_idle(void); -extern void pnx4008_pm_suspend(void); -extern unsigned int pnx4008_cpu_suspend_sz; -extern void pnx4008_cpu_suspend(void); -extern unsigned int pnx4008_cpu_standby_sz; -extern void pnx4008_cpu_standby(void); - -extern int pnx4008_startup_pll(struct clk *); -extern int pnx4008_shutdown_pll(struct clk *); - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h deleted file mode 100644 index b383c7de7ab..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PNX4008_TIMEX_H -#define __PNX4008_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h deleted file mode 100644 index bb4751ee253..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2006 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART5_BASE 0x40090000 - -#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) -#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) - -static __inline__ void putc(char c) -{ - while (UART5_FR & (1 << 5)) - barrier(); - - UART5_DR = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c deleted file mode 100644 index 41e4201972d..00000000000 --- a/arch/arm/mach-pnx4008/irq.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-pnx4008/irq.c - * - * PNX4008 IRQ controller driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irq.h> - -static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES; - -static void pnx4008_mask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ -} - -static void pnx4008_unmask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq)); /* unmask interrupt */ -} - -static void pnx4008_mask_ack_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ - __raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq)); /* clear interrupt status */ -} - -static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_EDGE_RISING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_EDGE_FALLING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_LEVEL_LOW: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */ - irq_set_handler(d->irq, handle_level_irq); - break; - case IRQ_TYPE_LEVEL_HIGH: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */ - irq_set_handler(d->irq, handle_level_irq); - break; - - /* IRQ_TYPE_EDGE_BOTH is not supported */ - default: - printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); - return -1; - } - return 0; -} - -static struct irq_chip pnx4008_irq_chip = { - .irq_ack = pnx4008_mask_ack_irq, - .irq_mask = pnx4008_mask_irq, - .irq_unmask = pnx4008_unmask_irq, - .irq_set_type = pnx4008_set_irq_type, -}; - -void __init pnx4008_init_irq(void) -{ - unsigned int i; - - /* configure IRQ's */ - for (i = 0; i < NR_IRQS; i++) { - set_irq_flags(i, IRQF_VALID); - irq_set_chip(i, &pnx4008_irq_chip); - pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]); - } - - /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */ - pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N), - pnx4008_irq_type[SUB1_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N), - pnx4008_irq_type[SUB2_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N), - pnx4008_irq_type[SUB1_FIQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N), - pnx4008_irq_type[SUB2_FIQ_N]); - - /* mask all others */ - __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) | - (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N), - INTC_ER(MAIN_BASE_INT)); - __raw_writel(0, INTC_ER(SIC1_BASE_INT)); - __raw_writel(0, INTC_ER(SIC2_BASE_INT)); -} - diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c deleted file mode 100644 index 26f8d06b142..00000000000 --- a/arch/arm/mach-pnx4008/pm.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-pnx4008/pm.c - * - * Power Management driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/pm.h> -#include <linux/rtc.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/suspend.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <asm/cacheflush.h> - -#include <mach/hardware.h> -#include <mach/pm.h> -#include <mach/clock.h> - -#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE) - -static void *saved_sram; - -static struct clk *pll4_clk; - -static inline void pnx4008_standby(void) -{ - void (*pnx4008_cpu_standby_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz); - - /*do suspend */ - pnx4008_cpu_standby_ptr = (void *)SRAM_VA; - pnx4008_cpu_standby_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static inline void pnx4008_suspend(void) -{ - void (*pnx4008_cpu_suspend_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz); - - /*do suspend */ - pnx4008_cpu_suspend_ptr = (void *)SRAM_VA; - pnx4008_cpu_suspend_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static int pnx4008_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_STANDBY: - pnx4008_standby(); - break; - case PM_SUSPEND_MEM: - pnx4008_suspend(); - break; - } - return 0; -} - -static int pnx4008_pm_valid(suspend_state_t state) -{ - return (state == PM_SUSPEND_STANDBY) || - (state == PM_SUSPEND_MEM); -} - -static const struct platform_suspend_ops pnx4008_pm_ops = { - .enter = pnx4008_pm_enter, - .valid = pnx4008_pm_valid, -}; - -int __init pnx4008_pm_init(void) -{ - u32 sram_size_to_allocate; - - pll4_clk = clk_get(0, "ck_pll4"); - if (IS_ERR(pll4_clk)) { - printk(KERN_ERR - "PM Suspend cannot acquire ARM(PLL4) clock control\n"); - return PTR_ERR(pll4_clk); - } - - if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz) - sram_size_to_allocate = pnx4008_cpu_standby_sz; - else - sram_size_to_allocate = pnx4008_cpu_suspend_sz; - - saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC); - if (!saved_sram) { - printk(KERN_ERR - "PM Suspend: cannot allocate memory to save portion of SRAM\n"); - clk_put(pll4_clk); - return -ENOMEM; - } - - suspend_set_ops(&pnx4008_pm_ops); - return 0; -} diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c deleted file mode 100644 index 374c138ac1a..00000000000 --- a/arch/arm/mach-pnx4008/serial.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/serial.c - * - * PNX4008 UART initialization - * - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include <mach/platform.h> -#include <mach/hardware.h> - -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#include <mach/gpio-pnx4008.h> -#include <mach/clock.h> - -#define UART_3 0 -#define UART_4 1 -#define UART_5 2 -#define UART_6 3 -#define UART_UNKNOWN (-1) - -#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE) -#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE) -#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE) -#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE) - -#define UART_FCR_OFFSET 8 -#define UART_FIFO_SIZE 64 - -void pnx4008_uart_init(void) -{ - u32 tmp; - int i = UART_FIFO_SIZE; - - __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET); - - /* Send a NULL to fix the UART HW bug */ - __raw_writel(0x00, UART5_BASE_VA); - __raw_writel(0x00, UART3_BASE_VA); - - while (i--) { - tmp = __raw_readl(UART5_BASE_VA); - tmp = __raw_readl(UART3_BASE_VA); - } - __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET); - - /* setup wakeup interrupt */ - start_int_set_rising_edge(SE_U3_RX_INT); - start_int_ack(SE_U3_RX_INT); - start_int_umask(SE_U3_RX_INT); - - start_int_set_rising_edge(SE_U5_RX_INT); - start_int_ack(SE_U5_RX_INT); - start_int_umask(SE_U5_RX_INT); -} - diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S deleted file mode 100644 index f4eed495d29..00000000000 --- a/arch/arm/mach-pnx4008/sleep.S +++ /dev/null @@ -1,195 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/sleep.S - * - * PNX4008 support for STOP mode and SDRAM self-refresh - * - * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/hardware.h> - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define PWR_CTRL_REG_OFFS 0x44 - -#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE) -#define MPMC_STATUS_REG_OFFS 0x4 - - .text - -ENTRY(pnx4008_cpu_suspend) - @this function should be entered in Direct run mode. - - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ to prepare SDRAM to get out of self-refresh mode after wakeup - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do enter stop mode - orr r5, r5, #(1 << 0) - str r5, [r4, #PWR_CTRL_REG_OFFS] - nop - nop - nop - nop - nop - nop - nop - nop - nop - - @ sleeping now... - - @ coming out of STOP mode into Direct Run mode - @ clear STOP mode and SDRAM self-refresh bits - str r1, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_suspend_sz) - .word . - pnx4008_cpu_suspend - -ENTRY(pnx4008_cpu_standby) - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ set 'get out of self-refresh mode after wakeup' bit - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now... - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_standby_sz) - .word . - pnx4008_cpu_standby - -ENTRY(pnx4008_cache_clean_invalidate) - stmfd sp!, {r0 - r6, lr} -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate - bne 1b -#endif - ldmfd sp!, {r0 - r6, pc} diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c deleted file mode 100644 index 0cfe8af3d3b..00000000000 --- a/arch/arm/mach-pnx4008/time.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-pnx4008/time.c - * - * PNX4008 Timers - * - * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach/time.h> -#include <asm/errno.h> - -#include "time.h" - -/*! Note: all timers are UPCOUNTING */ - -/*! - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long pnx4008_gettimeoffset(void) -{ - u32 ticks_to_match = - __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER); - u32 elapsed = LATCH - ticks_to_match; - return (elapsed * (tick_nsec / 1000)) / LATCH; -} - -/*! - * IRQ handler for the timer - */ -static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) -{ - if (__raw_readl(HSTIM_INT) & MATCH0_INT) { - - do { - timer_tick(); - - /* - * this algorithm takes care of possible delay - * for this interrupt handling longer than a normal - * timer period - */ - __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH, - HSTIM_MATCH0); - __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */ - - /* - * The goal is to keep incrementing HSTIM_MATCH0 - * register until HSTIM_MATCH0 indicates time after - * what HSTIM_COUNTER indicates. - */ - } while ((signed) - (__raw_readl(HSTIM_MATCH0) - - __raw_readl(HSTIM_COUNTER)) < 0); - } - - return IRQ_HANDLED; -} - -static struct irqaction pnx4008_timer_irq = { - .name = "PNX4008 Tick Timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pnx4008_timer_interrupt -}; - -/*! - * Set up timer and timer interrupt. - */ -static __init void pnx4008_setup_timer(void) -{ - __raw_writel(RESET_COUNT, MSTIM_CTRL); - while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, MSTIM_CTRL); /* stop the timer */ - __raw_writel(0, MSTIM_MCTRL); - - __raw_writel(RESET_COUNT, HSTIM_CTRL); - while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, HSTIM_CTRL); - __raw_writel(0, HSTIM_MCTRL); - __raw_writel(0, HSTIM_CCR); - __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */ - __raw_writel(LATCH, HSTIM_MATCH0); - __raw_writel(MR0_INT, HSTIM_MCTRL); - - setup_irq(HSTIMER_INT, &pnx4008_timer_irq); - - __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */ -} - -/* Timer Clock Control in PM register */ -#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC)) -#define WATCHDOG_CLK_EN 1 -#define TIMER_CLK_EN 2 /* HS and MS timers? */ - -static u32 timclk_ctrl_reg_save; - -void pnx4008_timer_suspend(void) -{ - timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG); - __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */ -} - -void pnx4008_timer_resume(void) -{ - __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */ -} - -struct sys_timer pnx4008_timer = { - .init = pnx4008_setup_timer, - .offset = pnx4008_gettimeoffset, - .suspend = pnx4008_timer_suspend, - .resume = pnx4008_timer_resume, -}; - diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h deleted file mode 100644 index 75e88c570aa..00000000000 --- a/arch/arm/mach-pnx4008/time.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef PNX_TIME_H -#define PNX_TIME_H - -#include <linux/io.h> -#include <mach/hardware.h> - -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - -#endif diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig new file mode 100644 index 00000000000..41fc8532767 --- /dev/null +++ b/arch/arm/mach-prima2/Kconfig @@ -0,0 +1,19 @@ +if ARCH_SIRF + +menu "CSR SiRF primaII/Marco/Polo Specific Features" + +config ARCH_PRIMA2 + bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" + default y + select CPU_V7 + select ZONE_DMA + select SIRF_IRQ + help + Support for CSR SiRFSoC ARM Cortex A9 Platform + +endmenu + +config SIRF_IRQ + bool + +endif diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 13dd1604d95..fc9ce22e2b5 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -1,9 +1,8 @@ obj-y := timer.o -obj-y += irq.o -obj-y += clock.o obj-y += rstc.o -obj-y += prima2.o +obj-y += common.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o +obj-$(CONFIG_SIRF_IRQ) += irq.o diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c deleted file mode 100644 index aebad7e565c..00000000000 --- a/arch/arm/mach-prima2/clock.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Clock tree for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/module.h> -#include <linux/bitops.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <asm/mach/map.h> -#include <mach/map.h> - -#define SIRFSOC_CLKC_CLK_EN0 0x0000 -#define SIRFSOC_CLKC_CLK_EN1 0x0004 -#define SIRFSOC_CLKC_REF_CFG 0x0014 -#define SIRFSOC_CLKC_CPU_CFG 0x0018 -#define SIRFSOC_CLKC_MEM_CFG 0x001c -#define SIRFSOC_CLKC_SYS_CFG 0x0020 -#define SIRFSOC_CLKC_IO_CFG 0x0024 -#define SIRFSOC_CLKC_DSP_CFG 0x0028 -#define SIRFSOC_CLKC_GFX_CFG 0x002c -#define SIRFSOC_CLKC_MM_CFG 0x0030 -#define SIRFSOC_LKC_LCD_CFG 0x0034 -#define SIRFSOC_CLKC_MMC_CFG 0x0038 -#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 -#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 -#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 -#define SIRFSOC_CLKC_PLL1_CFG1 0x004c -#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 -#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 -#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 -#define SIRFSOC_CLKC_PLL2_CFG2 0x005c -#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 - -#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000) - -#define KHZ 1000 -#define MHZ (KHZ * KHZ) - -struct clk_ops { - unsigned long (*get_rate)(struct clk *clk); - long (*round_rate)(struct clk *clk, unsigned long rate); - int (*set_rate)(struct clk *clk, unsigned long rate); - int (*enable)(struct clk *clk); - int (*disable)(struct clk *clk); - struct clk *(*get_parent)(struct clk *clk); - int (*set_parent)(struct clk *clk, struct clk *parent); -}; - -struct clk { - struct clk *parent; /* parent clk */ - unsigned long rate; /* clock rate in Hz */ - signed char usage; /* clock enable count */ - signed char enable_bit; /* enable bit: 0 ~ 63 */ - unsigned short regofs; /* register offset */ - struct clk_ops *ops; /* clock operation */ -}; - -static DEFINE_SPINLOCK(clocks_lock); - -static inline unsigned long clkc_readl(unsigned reg) -{ - return readl(SIRFSOC_CLOCK_VA_BASE + reg); -} - -static inline void clkc_writel(u32 val, unsigned reg) -{ - writel(val, SIRFSOC_CLOCK_VA_BASE + reg); -} - -/* - * osc_rtc - real time oscillator - 32.768KHz - * osc_sys - high speed oscillator - 26MHz - */ - -static struct clk clk_rtc = { - .rate = 32768, -}; - -static struct clk clk_osc = { - .rate = 26 * MHZ, -}; - -/* - * std pll - */ -static unsigned long std_pll_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - - SIRFSOC_CLKC_PLL1_CFG0; - - if (clkc_readl(regcfg2) & BIT(2)) { - /* pll bypass mode */ - clk->rate = fin; - } else { - /* fout = fin * nf / nr / od */ - u32 cfg0 = clkc_readl(clk->regofs); - u32 nf = (cfg0 & (BIT(13) - 1)) + 1; - u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; - u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; - WARN_ON(fin % MHZ); - clk->rate = fin / MHZ * nf / nr / od * MHZ; - } - - return clk->rate; -} - -static int std_pll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin, nf, nr, od, reg; - - /* - * fout = fin * nf / (nr * od); - * set od = 1, nr = fin/MHz, so fout = nf * MHz - */ - - nf = rate / MHZ; - if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) - return -EINVAL; - - fin = clk_get_rate(clk->parent); - BUG_ON(fin < MHZ); - - nr = fin / MHZ; - BUG_ON((fin % MHZ) || nr > BIT(6)); - - od = 1; - - reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); - clkc_writel(reg, clk->regofs); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; - clkc_writel((nf >> 1) - 1, reg); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; - while (!(clkc_readl(reg) & BIT(6))) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - return 0; -} - -static struct clk_ops std_pll_ops = { - .get_rate = std_pll_get_rate, - .set_rate = std_pll_set_rate, -}; - -static struct clk clk_pll1 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL1_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll2 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL2_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll3 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL3_CFG0, - .ops = &std_pll_ops, -}; - -/* - * clock domains - cpu, mem, sys/io - */ - -static struct clk clk_mem; - -static struct clk *dmn_get_parent(struct clk *clk) -{ - struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - WARN_ON((cfg & (BIT(3) - 1)) > 4); - return clks[cfg & (BIT(3) - 1)]; -} - -static int dmn_set_parent(struct clk *clk, struct clk *parent) -{ - const struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - int i; - for (i = 0; i < ARRAY_SIZE(clks); i++) { - if (clks[i] == parent) { - cfg &= ~(BIT(3) - 1); - clkc_writel(cfg | i, clk->regofs); - /* BIT(3) - switching status: 1 - busy, 0 - done */ - while (clkc_readl(clk->regofs) & BIT(3)) - cpu_relax(); - return 0; - } - } - return -EINVAL; -} - -static unsigned long dmn_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 cfg = clkc_readl(clk->regofs); - if (cfg & BIT(24)) { - /* fcd bypass mode */ - clk->rate = fin; - } else { - /* - * wait count: bit[19:16], hold count: bit[23:20] - */ - u32 wait = (cfg >> 16) & (BIT(4) - 1); - u32 hold = (cfg >> 20) & (BIT(4) - 1); - - clk->rate = fin / (wait + hold + 2); - } - - return clk->rate; -} - -static int dmn_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin; - unsigned ratio, wait, hold, reg; - unsigned bits = (clk == &clk_mem) ? 3 : 4; - - fin = clk_get_rate(clk->parent); - ratio = fin / rate; - - if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) - return -EINVAL; - - WARN_ON(fin % rate); - - wait = (ratio >> 1) - 1; - hold = ratio - wait - 2; - - reg = clkc_readl(clk->regofs); - reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); - reg |= (wait << 16) | (hold << 20) | BIT(25); - clkc_writel(reg, clk->regofs); - - /* waiting FCD been effective */ - while (clkc_readl(clk->regofs) & BIT(25)) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - - return 0; -} - -/* - * cpu clock has no FCD register in Prima2, can only change pll - */ -static int cpu_set_rate(struct clk *clk, unsigned long rate) -{ - int ret1, ret2; - struct clk *cur_parent, *tmp_parent; - - cur_parent = dmn_get_parent(clk); - BUG_ON(cur_parent == NULL || cur_parent->usage > 1); - - /* switch to tmp pll before setting parent clock's rate */ - tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1; - ret1 = dmn_set_parent(clk, tmp_parent); - BUG_ON(ret1); - - ret2 = clk_set_rate(cur_parent, rate); - - ret1 = dmn_set_parent(clk, cur_parent); - - clk->rate = 0; /* set to zero will force recalculation */ - - return ret2 ? ret2 : ret1; -} - -static struct clk_ops cpu_ops = { - .get_parent = dmn_get_parent, - .set_parent = dmn_set_parent, - .set_rate = cpu_set_rate, -}; - -static struct clk clk_cpu = { - .parent = &clk_pll1, - .regofs = SIRFSOC_CLKC_CPU_CFG, - .ops = &cpu_ops, -}; - - -static struct clk_ops msi_ops = { - .set_rate = dmn_set_rate, - .get_rate = dmn_get_rate, - .set_parent = dmn_set_parent, - .get_parent = dmn_get_parent, -}; - -static struct clk clk_mem = { - .parent = &clk_pll2, - .regofs = SIRFSOC_CLKC_MEM_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_sys = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_SYS_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_io = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_IO_CFG, - .ops = &msi_ops, -}; - -/* - * on-chip clock sets - */ -static struct clk_lookup onchip_clks[] = { - { - .dev_id = "rtc", - .clk = &clk_rtc, - }, { - .dev_id = "osc", - .clk = &clk_osc, - }, { - .dev_id = "pll1", - .clk = &clk_pll1, - }, { - .dev_id = "pll2", - .clk = &clk_pll2, - }, { - .dev_id = "pll3", - .clk = &clk_pll3, - }, { - .dev_id = "cpu", - .clk = &clk_cpu, - }, { - .dev_id = "mem", - .clk = &clk_mem, - }, { - .dev_id = "sys", - .clk = &clk_sys, - }, { - .dev_id = "io", - .clk = &clk_io, - }, -}; - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (clk->parent) - clk_enable(clk->parent); - - spin_lock_irqsave(&clocks_lock, flags); - if (!clk->usage++ && clk->ops && clk->ops->enable) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return; - - WARN_ON(!clk->usage); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->usage == 0 && clk->ops && clk->ops->disable) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - if (clk->parent) - clk_disable(clk->parent); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->rate) - return clk->rate; - - if (clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->ops && clk->ops->round_rate) - return clk->ops->round_rate(clk, rate); - - return 0; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_rate) - return -EINVAL; - - return clk->ops->set_rate(clk, rate); -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret; - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_parent) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->ops->set_parent(clk, parent); - if (!ret) { - parent->usage += clk->usage; - clk->parent->usage -= clk->usage; - BUG_ON(clk->parent->usage < 0); - clk->parent = parent; - } - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return NULL; - - if (!clk->ops || !clk->ops->get_parent) - return clk->parent; - - spin_lock_irqsave(&clocks_lock, flags); - clk->parent = clk->ops->get_parent(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static void __init sirfsoc_clk_init(void) -{ - clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); -} - -static struct of_device_id clkc_ids[] = { - { .compatible = "sirf,prima2-clkc" }, - {}, -}; - -void __init sirfsoc_of_clk_init(void) -{ - struct device_node *np; - struct resource res; - struct map_desc sirfsoc_clkc_iodesc = { - .virtual = SIRFSOC_CLOCK_VA_BASE, - .type = MT_DEVICE, - }; - - np = of_find_matching_node(NULL, clkc_ids); - if (!np) - panic("unable to find compatible clkc node in dtb\n"); - - if (of_address_to_resource(np, 0, &res)) - panic("unable to find clkc range in dtb"); - of_node_put(np); - - sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start); - sirfsoc_clkc_iodesc.length = 1 + res.end - res.start; - - iotable_init(&sirfsoc_clkc_iodesc, 1); - - sirfsoc_clk_init(); -} diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/common.c index 8f0429d4b79..f25a5419463 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/common.c @@ -30,21 +30,21 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } -static const char *prima2cb_dt_match[] __initdata = { - "sirf,prima2-cb", +#ifdef CONFIG_ARCH_PRIMA2 +static const char *prima2_dt_match[] __initdata = { + "sirf,prima2", NULL }; -MACHINE_START(PRIMA2_EVB, "prima2cb") +DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .atag_offset = 0x100, - .init_early = sirfsoc_of_clk_init, .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, - .dt_compat = prima2cb_dt_match, + .dt_compat = prima2_dt_match, .restart = sirfsoc_restart, MACHINE_END +#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index a7b9415d30f..7dee9176e77 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -63,7 +63,7 @@ void __init sirfsoc_of_irq_init(void) np = of_find_matching_node(NULL, intc_ids); if (!np) - panic("unable to find compatible intc node in dtb\n"); + return; sirfsoc_intc_base = of_iomap(np, 0); if (!sirfsoc_intc_base) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index f224107de7b..d95bf252f69 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -21,6 +21,8 @@ #include <asm/sched_clock.h> #include <asm/mach/time.h> +#include "common.h" + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -188,9 +190,13 @@ static void __init sirfsoc_clockevent_init(void) static void __init sirfsoc_timer_init(void) { unsigned long rate; + struct clk *clk; + + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); /* timer's input clock is io clock */ - struct clk *clk = clk_get_sys("io", NULL); + clk = clk_get_sys("io", NULL); BUG_ON(IS_ERR(clk)); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 166eee5b8a7..c1f3b1279d9 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -6,7 +6,6 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/i2c/pxa-i2c.h> -#include <asm/pmu.h> #include <mach/udc.h> #include <mach/pxa3xx-u2d.h> #include <mach/pxafb.h> @@ -42,7 +41,7 @@ static struct resource pxa_resource_pmu = { struct platform_device pxa_device_pmu = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pxa_resource_pmu, .num_resources = 1, }; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index baf382c5e77..d7a6e9cebba 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,7 +32,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -297,7 +296,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index b1d7cafa1a6..361f898884c 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -34,7 +34,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -280,7 +279,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, .resource = &pmu_resource, }; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index a98c536e332..c56bc8d4d11 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,7 +32,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -263,7 +262,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 59650174e6e..04093758245 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -31,7 +31,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> @@ -241,7 +240,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, .resource = &pmu_resource, }; diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 3f2f605624e..97885dc11e8 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -30,7 +30,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/smp_twd.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> @@ -280,7 +279,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index a5eeb62ce1c..57aee916bdb 100644 --- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c @@ -138,19 +138,7 @@ static struct platform_driver h1940bt_driver = { .remove = h1940bt_remove, }; - -static int __init h1940bt_init(void) -{ - return platform_driver_register(&h1940bt_driver); -} - -static void __exit h1940bt_exit(void) -{ - platform_driver_unregister(&h1940bt_driver); -} - -module_init(h1940bt_init); -module_exit(h1940bt_exit); +module_platform_driver(h1940bt_driver); MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>"); MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip"); diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 5a7d0c0010f..0c7ed7a2b0c 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -424,7 +424,8 @@ static void __init anubis_map_io(void) anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); } else { /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA(0), 1); + gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPA(0)); } } diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ae73ba34ecc..471334715c3 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -512,8 +512,8 @@ static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); - s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPC(5)); } static void __init jive_machine_init(void) @@ -623,11 +623,11 @@ static void __init jive_machine_init(void) gpio_request(S3C2410_GPB(7), "jive spi"); gpio_direction_output(S3C2410_GPB(7), 1); - s3c2410_gpio_setpin(S3C2410_GPB(6), 0); - s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); + gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPB(6)); - s3c2410_gpio_setpin(S3C2410_GPG(8), 1); - s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); + gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPG(8)); /* initialise the WM8750 spi */ diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index bd6d2525deb..734bbfe5ea2 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -638,9 +638,9 @@ static void __init mini2440_init(void) gpio_free(S3C2410_GPG(4)); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ + gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL); s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); - s3c2410_gpio_setpin(S3C2410_GPB(1), 0); - s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + gpio_free(S3C2410_GPB(1)); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5c05ba1c330..a71a551094e 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -119,17 +119,17 @@ static struct platform_device *nexcoder_devices[] __initdata = { static void __init nexcoder_sensorboard_init(void) { - // Initialize SCCB bus - s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL - s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA - s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); - - // Power up the sensor board - s3c2410_gpio_setpin(S3C2410_GPF(1), 1); - s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN + /* Initialize SCCB bus */ + gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPE(14)); /* IICSCL */ + gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPE(15)); /* IICSDA */ + + /* Power up the sensor board */ + gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */ + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */ } static void __init nexcoder_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ad2792dfbee..5876c6ba750 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -175,18 +175,7 @@ static struct platform_driver osiris_dvs_driver = { }, }; -static int __init osiris_dvs_init(void) -{ - return platform_driver_register(&osiris_dvs_driver); -} - -static void __exit osiris_dvs_exit(void) -{ - platform_driver_unregister(&osiris_dvs_driver); -} - -module_init(osiris_dvs_init); -module_exit(osiris_dvs_exit); +module_platform_driver(osiris_dvs_driver); MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index 95d07725502..c0fb3c1bc54 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -274,8 +274,8 @@ static int osiris_pm_suspend(void) __raw_writeb(tmp, OSIRIS_VA_CTRL0); /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); + gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPA(21)); return 0; } @@ -396,7 +396,8 @@ static void __init osiris_map_io(void) osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); } else { /* write-protect line to the NAND */ - s3c2410_gpio_setpin(S3C2410_GPA(0), 1); + gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPA(0)); } /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 2704bcd869c..d35b94ef73b 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -21,9 +21,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#define IO_BASE 0xe0000000 -#define IO_SIZE 0x08000000 -#define IO_START 0x40000000 #define ROMCARD_SIZE 0x08000000 #define ROMCARD_START 0x10000000 @@ -104,20 +101,6 @@ arch_initcall(shark_init); extern void shark_init_irq(void); -static struct map_desc shark_io_desc[] __initdata = { - { - .virtual = IO_BASE, - .pfn = __phys_to_pfn(IO_START), - .length = IO_SIZE, - .type = MT_DEVICE - } -}; - -static void __init shark_map_io(void) -{ - iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc)); -} - #define IRQ_TIMER 0 #define HZ_TIME ((1193180 + HZ/2) / HZ) @@ -158,7 +141,6 @@ static void shark_init_early(void) MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, - .map_io = shark_map_io, .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 20eb2bf2a42..d129119a3f6 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -12,9 +12,10 @@ */ .macro addruart, rp, rv, tmp - mov \rp, #0xe0000000 - orr \rp, \rp, #0x000003f8 - mov \rv, \rp + mov \rp, #0x3f8 + orr \rv, \rp, #0xfe000000 + orr \rv, \rv, #0x00e00000 + orr \rp, \rp, #0x40000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index 5901b09fc96..c9e49f04953 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -8,7 +8,8 @@ * warranty of any kind, whether express or implied. */ .macro get_irqnr_preamble, base, tmp - mov \base, #0xe0000000 + mov \base, #0xfe000000 + orr \base, \base, #0x00e00000 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h deleted file mode 100644 index 1a45fc01ff1..00000000000 --- a/arch/arm/mach-shark/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/io.h - * - * by Alexander Schulz - * - * derived from: - * arch/arm/mach-ebsa110/include/mach/io.h - * Copyright (C) 1997,1998 Russell King - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(0xe0000000 + (a))) - -#endif diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index 9089407d532..b8b4ab323a3 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -8,12 +8,15 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> +#include <linux/io.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define IO_START 0x40000000 + static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->bus->number == 0) @@ -44,6 +47,8 @@ static int __init shark_pci_init(void) pcibios_min_mem = 0x50000000; vga_base = 0xe8000000; + pci_ioremap_io(0, IO_START); + pci_common_init(&shark_pci); return 0; diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index d82c010fdfc..cfc3b5c43ba 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -40,7 +40,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 9077aaa398d..5f3c03b61f8 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -34,7 +34,6 @@ config ARCH_TEGRA_3x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB select USB_ULPI_VIEWPORT if USB_SUPPORT - select USE_OF select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 @@ -60,25 +59,6 @@ config TEGRA_AHB comment "Tegra board type" -config MACH_HARMONY - bool "Harmony board" - depends on ARCH_TEGRA_2x_SOC - help - Support for nVidia Harmony development platform - -config MACH_PAZ00 - bool "Paz00 board" - depends on ARCH_TEGRA_2x_SOC - help - Support for the Toshiba AC100/Dynabook AZ netbook - -config MACH_TRIMSLICE - bool "TrimSlice board" - depends on ARCH_TEGRA_2x_SOC - select TEGRA_PCI - help - Support for CompuLab TrimSlice platform - choice prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE @@ -130,13 +110,6 @@ config TEGRA_DEBUG_UART_AUTO_SCRATCH endchoice -config TEGRA_SYSTEM_DMA - bool "Enable system DMA driver for NVIDIA Tegra SoCs" - default y - help - Adds system DMA functionality for NVIDIA Tegra SoCs, used by - several Tegra device drivers - config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index c3d7303b9ac..0974ace4555 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o @@ -26,13 +25,6 @@ obj-$(CONFIG_USB_SUPPORT) += usb_phy.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_MACH_HARMONY) += board-harmony.o -obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o -obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o -obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o -obj-$(CONFIG_MACH_PAZ00) += board-paz00.o -obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o - -obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o -obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index dc0fe389be5..b5015d0f191 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -28,7 +28,7 @@ #include "apbio.h" -#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA) +#if defined(CONFIG_TEGRA20_APB_DMA) static DEFINE_MUTEX(tegra_apb_dma_lock); static u32 *tegra_apb_bb; static dma_addr_t tegra_apb_bb_phys; @@ -37,121 +37,6 @@ static DECLARE_COMPLETION(tegra_apb_wait); static u32 tegra_apb_readl_direct(unsigned long offset); static void tegra_apb_writel_direct(u32 value, unsigned long offset); -#if defined(CONFIG_TEGRA_SYSTEM_DMA) -static struct tegra_dma_channel *tegra_apb_dma; - -bool tegra_apb_init(void) -{ - struct tegra_dma_channel *ch; - - mutex_lock(&tegra_apb_dma_lock); - - /* Check to see if we raced to setup */ - if (tegra_apb_dma) - goto out; - - ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT | - TEGRA_DMA_SHARED); - - if (!ch) - goto out_fail; - - tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32), - &tegra_apb_bb_phys, GFP_KERNEL); - if (!tegra_apb_bb) { - pr_err("%s: can not allocate bounce buffer\n", __func__); - tegra_dma_free_channel(ch); - goto out_fail; - } - - tegra_apb_dma = ch; -out: - mutex_unlock(&tegra_apb_dma_lock); - return true; - -out_fail: - mutex_unlock(&tegra_apb_dma_lock); - return false; -} - -static void apb_dma_complete(struct tegra_dma_req *req) -{ - complete(&tegra_apb_wait); -} - -static u32 tegra_apb_readl_using_dma(unsigned long offset) -{ - struct tegra_dma_req req; - int ret; - - if (!tegra_apb_dma && !tegra_apb_init()) - return tegra_apb_readl_direct(offset); - - mutex_lock(&tegra_apb_dma_lock); - req.complete = apb_dma_complete; - req.to_memory = 1; - req.dest_addr = tegra_apb_bb_phys; - req.dest_bus_width = 32; - req.dest_wrap = 1; - req.source_addr = offset; - req.source_bus_width = 32; - req.source_wrap = 4; - req.req_sel = TEGRA_DMA_REQ_SEL_CNTR; - req.size = 4; - - INIT_COMPLETION(tegra_apb_wait); - - tegra_dma_enqueue_req(tegra_apb_dma, &req); - - ret = wait_for_completion_timeout(&tegra_apb_wait, - msecs_to_jiffies(50)); - - if (WARN(ret == 0, "apb read dma timed out")) { - tegra_dma_dequeue_req(tegra_apb_dma, &req); - *(u32 *)tegra_apb_bb = 0; - } - - mutex_unlock(&tegra_apb_dma_lock); - return *((u32 *)tegra_apb_bb); -} - -static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) -{ - struct tegra_dma_req req; - int ret; - - if (!tegra_apb_dma && !tegra_apb_init()) { - tegra_apb_writel_direct(value, offset); - return; - } - - mutex_lock(&tegra_apb_dma_lock); - *((u32 *)tegra_apb_bb) = value; - req.complete = apb_dma_complete; - req.to_memory = 0; - req.dest_addr = offset; - req.dest_wrap = 4; - req.dest_bus_width = 32; - req.source_addr = tegra_apb_bb_phys; - req.source_bus_width = 32; - req.source_wrap = 1; - req.req_sel = TEGRA_DMA_REQ_SEL_CNTR; - req.size = 4; - - INIT_COMPLETION(tegra_apb_wait); - - tegra_dma_enqueue_req(tegra_apb_dma, &req); - - ret = wait_for_completion_timeout(&tegra_apb_wait, - msecs_to_jiffies(50)); - - if (WARN(ret == 0, "apb write dma timed out")) - tegra_dma_dequeue_req(tegra_apb_dma, &req); - - mutex_unlock(&tegra_apb_dma_lock); -} - -#else static struct dma_chan *tegra_apb_dma_chan; static struct dma_slave_config dma_sconfig; @@ -279,7 +164,6 @@ static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) pr_err("error in writing offset 0x%08lx using dma\n", offset); mutex_unlock(&tegra_apb_dma_lock); } -#endif #else #define tegra_apb_readl_using_dma tegra_apb_readl_direct #define tegra_apb_writel_using_dma tegra_apb_writel_direct @@ -293,12 +177,12 @@ static apbio_write_fptr apbio_write; static u32 tegra_apb_readl_direct(unsigned long offset) { - return readl(IO_TO_VIRT(offset)); + return readl(IO_ADDRESS(offset)); } static void tegra_apb_writel_direct(u32 value, unsigned long offset) { - writel(value, IO_TO_VIRT(offset)); + writel(value, IO_ADDRESS(offset)); } void tegra_apb_io_init(void) diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index c0999633a9a..37007d60bc3 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -42,7 +42,6 @@ #include <mach/irqs.h> #include "board.h" -#include "board-harmony.h" #include "clock.h" #include "devices.h" @@ -95,54 +94,40 @@ static void __init tegra_dt_init(void) tegra20_auxdata_lookup, NULL); } -#ifdef CONFIG_MACH_TRIMSLICE static void __init trimslice_init(void) { +#ifdef CONFIG_TEGRA_PCI int ret; ret = tegra_pcie_init(true, true); if (ret) pr_err("tegra_pci_init() failed: %d\n", ret); -} #endif +} -#ifdef CONFIG_MACH_HARMONY static void __init harmony_init(void) { +#ifdef CONFIG_TEGRA_PCI int ret; - ret = harmony_regulator_init(); - if (ret) { - pr_err("harmony_regulator_init() failed: %d\n", ret); - return; - } - ret = harmony_pcie_init(); if (ret) pr_err("harmony_pcie_init() failed: %d\n", ret); -} #endif +} -#ifdef CONFIG_MACH_PAZ00 static void __init paz00_init(void) { tegra_paz00_wifikill_init(); } -#endif static struct { char *machine; void (*init)(void); } board_init_funcs[] = { -#ifdef CONFIG_MACH_TRIMSLICE { "compulab,trimslice", trimslice_init }, -#endif -#ifdef CONFIG_MACH_HARMONY { "nvidia,harmony", harmony_init }, -#endif -#ifdef CONFIG_MACH_PAZ00 { "compal,paz00", paz00_init }, -#endif }; static void __init tegra_dt_init_late(void) diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index e8c3fda9bec..3cdc1bb8254 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -18,35 +18,57 @@ #include <linux/kernel.h> #include <linux/gpio.h> #include <linux/err.h> +#include <linux/of_gpio.h> #include <linux/regulator/consumer.h> #include <asm/mach-types.h> #include "board.h" -#include "board-harmony.h" #ifdef CONFIG_TEGRA_PCI int __init harmony_pcie_init(void) { + struct device_node *np; + int en_vdd_1v05; struct regulator *regulator = NULL; int err; - err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); - if (err) + np = of_find_node_by_path("/regulators/regulator@3"); + if (!np) { + pr_err("%s: of_find_node_by_path failed\n", __func__); + return -ENODEV; + } + + en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0); + if (en_vdd_1v05 < 0) { + pr_err("%s: of_get_named_gpio failed: %d\n", __func__, + en_vdd_1v05); + return en_vdd_1v05; + } + + err = gpio_request(en_vdd_1v05, "EN_VDD_1V05"); + if (err) { + pr_err("%s: gpio_request failed: %d\n", __func__, err); return err; + } - gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1); + gpio_direction_output(en_vdd_1v05, 1); - regulator = regulator_get(NULL, "pex_clk"); - if (IS_ERR_OR_NULL(regulator)) + regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk"); + if (IS_ERR_OR_NULL(regulator)) { + pr_err("%s: regulator_get failed: %d\n", __func__, + (int)PTR_ERR(regulator)); goto err_reg; + } regulator_enable(regulator); err = tegra_pcie_init(true, true); - if (err) + if (err) { + pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err); goto err_pcie; + } return 0; @@ -54,20 +76,9 @@ err_pcie: regulator_disable(regulator); regulator_put(regulator); err_reg: - gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO); + gpio_free(en_vdd_1v05); return err; } -static int __init harmony_pcie_initcall(void) -{ - if (!machine_is_harmony()) - return 0; - - return harmony_pcie_init(); -} - -/* PCI should be initialized after I2C, mfd and regulators */ -subsys_initcall_sync(harmony_pcie_initcall); - #endif diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c deleted file mode 100644 index 83d420fbc58..00000000000 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * arch/arm/mach-tegra/board-harmony-pinmux.c - * - * Copyright (C) 2010 Google, Inc. - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> - -#include "board-harmony.h" -#include "board-pinmux.h" - -static struct pinctrl_map harmony_map[] = { - TEGRA_MAP_MUXCONF("ata", "ide", none, driven), - TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("atc", "nand", none, driven), - TEGRA_MAP_MUXCONF("atd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("ate", "gmi", none, driven), - TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven), - TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate), - TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate), - TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate), - TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven), - TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate), - TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate), - TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate), - TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven), - TEGRA_MAP_MUXCONF("dta", "sdio2", up, driven), - TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, driven), - TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate), - TEGRA_MAP_MUXCONF("dtd", "sdio2", up, driven), - TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate), - TEGRA_MAP_MUXCONF("dtf", "i2c3", none, tristate), - TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven), - TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven), - TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gpu", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven), - TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven), - TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven), - TEGRA_MAP_MUXCONF("irrx", "uarta", up, tristate), - TEGRA_MAP_MUXCONF("irtx", "uarta", up, tristate), - TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven), - TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("owc", "rsvd2", na, tristate), - TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven), - TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven), - TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven), - TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate), - TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven), - TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate), - TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, tristate), - TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven), - TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("slxd", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven), - TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("spia", "gmi", none, driven), - TEGRA_MAP_MUXCONF("spib", "gmi", none, driven), - TEGRA_MAP_MUXCONF("spic", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate), - TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate), - TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate), - TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate), - TEGRA_MAP_MUXCONF("uac", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("uad", "irda", up, tristate), - TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate), - TEGRA_MAP_CONF("ck32", none, na), - TEGRA_MAP_CONF("ddrc", none, na), - TEGRA_MAP_CONF("pmca", none, na), - TEGRA_MAP_CONF("pmcb", none, na), - TEGRA_MAP_CONF("pmcc", none, na), - TEGRA_MAP_CONF("pmcd", none, na), - TEGRA_MAP_CONF("pmce", none, na), - TEGRA_MAP_CONF("xm2c", none, na), - TEGRA_MAP_CONF("xm2d", none, na), - TEGRA_MAP_CONF("ls", up, na), - TEGRA_MAP_CONF("lc", up, na), - TEGRA_MAP_CONF("ld17_0", down, na), - TEGRA_MAP_CONF("ld19_18", down, na), - TEGRA_MAP_CONF("ld21_20", down, na), - TEGRA_MAP_CONF("ld23_22", down, na), -}; - -static struct tegra_board_pinmux_conf conf = { - .maps = harmony_map, - .map_count = ARRAY_SIZE(harmony_map), -}; - -void harmony_pinmux_init(void) -{ - tegra_board_pinmux_init(&conf, NULL); -} diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c deleted file mode 100644 index b7344beec10..00000000000 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (C) 2010 NVIDIA, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - * 02111-1307, USA - */ -#include <linux/i2c.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/mfd/tps6586x.h> -#include <linux/of.h> -#include <linux/of_i2c.h> - -#include <asm/mach-types.h> - -#include <mach/irqs.h> - -#include "board-harmony.h" - -static struct regulator_consumer_supply tps658621_ldo0_supply[] = { - REGULATOR_SUPPLY("pex_clk", NULL), -}; - -static struct regulator_init_data ldo0_data = { - .supply_regulator = "vdd_sm2", - .constraints = { - .name = "vdd_ldo0", - .min_uV = 3300 * 1000, - .max_uV = 3300 * 1000, - .valid_modes_mask = (REGULATOR_MODE_NORMAL | - REGULATOR_MODE_STANDBY), - .valid_ops_mask = (REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_VOLTAGE), - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply), - .consumer_supplies = tps658621_ldo0_supply, -}; - -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ - static struct regulator_init_data _id##_data = { \ - .supply_regulator = _supply, \ - .constraints = { \ - .name = _name, \ - .min_uV = (_minmv)*1000, \ - .max_uV = (_maxmv)*1000, \ - .valid_modes_mask = (REGULATOR_MODE_NORMAL | \ - REGULATOR_MODE_STANDBY), \ - .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ - REGULATOR_CHANGE_STATUS | \ - REGULATOR_CHANGE_VOLTAGE), \ - .always_on = _on, \ - }, \ - } - -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); - -#define TPS_REG(_id, _data) \ - { \ - .id = TPS6586X_ID_##_id, \ - .name = "tps6586x-regulator", \ - .platform_data = _data, \ - } - -static struct tps6586x_subdev_info tps_devs[] = { - TPS_REG(SM_0, &sm0_data), - TPS_REG(SM_1, &sm1_data), - TPS_REG(SM_2, &sm2_data), - TPS_REG(LDO_0, &ldo0_data), - TPS_REG(LDO_1, &ldo1_data), - TPS_REG(LDO_2, &ldo2_data), - TPS_REG(LDO_3, &ldo3_data), - TPS_REG(LDO_4, &ldo4_data), - TPS_REG(LDO_5, &ldo5_data), - TPS_REG(LDO_6, &ldo6_data), - TPS_REG(LDO_7, &ldo7_data), - TPS_REG(LDO_8, &ldo8_data), - TPS_REG(LDO_9, &ldo9_data), -}; - -static struct tps6586x_platform_data tps_platform = { - .irq_base = TEGRA_NR_IRQS, - .num_subdevs = ARRAY_SIZE(tps_devs), - .subdevs = tps_devs, - .gpio_base = HARMONY_GPIO_TPS6586X(0), -}; - -static struct i2c_board_info __initdata harmony_regulators[] = { - { - I2C_BOARD_INFO("tps6586x", 0x34), - .irq = INT_EXTERNAL_PMU, - .platform_data = &tps_platform, - }, -}; - -int __init harmony_regulator_init(void) -{ - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); - - if (machine_is_harmony()) { - i2c_register_board_info(3, harmony_regulators, 1); - } else { /* Harmony, booted using device tree */ - struct device_node *np; - struct i2c_adapter *adapter; - - np = of_find_node_by_path("/i2c@7000d000"); - if (np == NULL) { - pr_err("Could not find device_node for DVC I2C\n"); - return -ENODEV; - } - - adapter = of_find_i2c_adapter_by_node(np); - if (!adapter) { - pr_err("Could not find i2c_adapter for DVC I2C\n"); - return -ENODEV; - } - - i2c_new_device(adapter, harmony_regulators); - } - - return 0; -} diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c deleted file mode 100644 index e65e837f401..00000000000 --- a/arch/arm/mach-tegra/board-harmony.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/arm/mach-tegra/board-harmony.c - * - * Copyright (C) 2010 Google, Inc. - * Copyright (C) 2011 NVIDIA, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/of_serial.h> -#include <linux/clk.h> -#include <linux/dma-mapping.h> -#include <linux/pda_power.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/i2c.h> - -#include <sound/wm8903.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/hardware/gic.h> -#include <asm/setup.h> - -#include <mach/tegra_wm8903_pdata.h> -#include <mach/iomap.h> -#include <mach/irqs.h> -#include <mach/sdhci.h> - -#include "board.h" -#include "board-harmony.h" -#include "clock.h" -#include "devices.h" -#include "gpio-names.h" - -static struct plat_serial8250_port debug_uart_platform_data[] = { - { - .membase = IO_ADDRESS(TEGRA_UARTD_BASE), - .mapbase = TEGRA_UARTD_BASE, - .irq = INT_UARTD, - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - .flags = 0 - } -}; - -static struct platform_device debug_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = debug_uart_platform_data, - }, -}; - -static struct tegra_wm8903_platform_data harmony_audio_pdata = { - .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, - .gpio_hp_det = TEGRA_GPIO_HP_DET, - .gpio_hp_mute = -1, - .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN, - .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN, -}; - -static struct platform_device harmony_audio_device = { - .name = "tegra-snd-wm8903", - .id = 0, - .dev = { - .platform_data = &harmony_audio_pdata, - }, -}; - -static struct wm8903_platform_data harmony_wm8903_pdata = { - .irq_active_low = 0, - .micdet_cfg = 0, - .micdet_delay = 100, - .gpio_base = HARMONY_GPIO_WM8903(0), - .gpio_cfg = { - 0, - 0, - WM8903_GPIO_CONFIG_ZERO, - 0, - 0, - }, -}; - -static struct i2c_board_info __initdata wm8903_board_info = { - I2C_BOARD_INFO("wm8903", 0x1a), - .platform_data = &harmony_wm8903_pdata, -}; - -static void __init harmony_i2c_init(void) -{ - platform_device_register(&tegra_i2c_device1); - platform_device_register(&tegra_i2c_device2); - platform_device_register(&tegra_i2c_device3); - platform_device_register(&tegra_i2c_device4); - - wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ); - i2c_register_board_info(0, &wm8903_board_info, 1); -} - -static struct platform_device *harmony_devices[] __initdata = { - &debug_uart, - &tegra_sdhci_device1, - &tegra_sdhci_device2, - &tegra_sdhci_device4, - &tegra_ehci3_device, - &tegra_i2s_device1, - &tegra_das_device, - &harmony_audio_device, -}; - -static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) -{ - mi->nr_banks = 2; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = 448 * SZ_1M; - mi->bank[1].start = SZ_512M; - mi->bank[1].size = SZ_512M; -} - -static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { - /* name parent rate enabled */ - { "uartd", "pll_p", 216000000, true }, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { "usb3", "clk_m", 12000000, true }, - { NULL, NULL, 0, 0}, -}; - - -static struct tegra_sdhci_platform_data sdhci_pdata1 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata2 = { - .cd_gpio = TEGRA_GPIO_SD2_CD, - .wp_gpio = TEGRA_GPIO_SD2_WP, - .power_gpio = TEGRA_GPIO_SD2_POWER, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = TEGRA_GPIO_SD4_CD, - .wp_gpio = TEGRA_GPIO_SD4_WP, - .power_gpio = TEGRA_GPIO_SD4_POWER, - .is_8bit = 1, -}; - -static void __init tegra_harmony_init(void) -{ - tegra_clk_init_from_table(harmony_clk_init_table); - - harmony_pinmux_init(); - - tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; - tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; - - platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices)); - harmony_i2c_init(); - harmony_regulator_init(); -} - -MACHINE_START(HARMONY, "harmony") - .atag_offset = 0x100, - .fixup = tegra_harmony_fixup, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_harmony_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h deleted file mode 100644 index 139d96c9384..00000000000 --- a/arch/arm/mach-tegra/board-harmony.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-tegra/board-harmony.h - * - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_BOARD_HARMONY_H -#define _MACH_TEGRA_BOARD_HARMONY_H - -#include <mach/gpio-tegra.h> - -#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) -#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_)) - -#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 -#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PT3 -#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 -#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 -#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 -#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 -#define TEGRA_GPIO_SPKR_EN HARMONY_GPIO_WM8903(2) -#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2 -#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0 -#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1 -#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2) - -void harmony_pinmux_init(void); -int harmony_regulator_init(void); - -#endif diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c deleted file mode 100644 index 6f1111b48e7..00000000000 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * arch/arm/mach-tegra/board-paz00-pinmux.c - * - * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de> - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> - -#include "board-paz00.h" -#include "board-pinmux.h" - -static struct pinctrl_map paz00_map[] = { - TEGRA_MAP_MUXCONF("ata", "gmi", none, driven), - TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("atc", "gmi", none, driven), - TEGRA_MAP_MUXCONF("atd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("ate", "gmi", none, driven), - TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven), - TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, driven), - TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate), - TEGRA_MAP_MUXCONF("csus", "pllc_out1", down, tristate), - TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven), - TEGRA_MAP_MUXCONF("dap2", "gmi", none, driven), - TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate), - TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate), - TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven), - TEGRA_MAP_MUXCONF("dta", "rsvd1", up, tristate), - TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, tristate), - TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate), - TEGRA_MAP_MUXCONF("dtd", "rsvd1", up, tristate), - TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate), - TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven), - TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven), - TEGRA_MAP_MUXCONF("gmc", "gmi", none, driven), - TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven), - TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven), - TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven), - TEGRA_MAP_MUXCONF("hdint", "hdmi", na, driven), - TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven), - TEGRA_MAP_MUXCONF("irrx", "uarta", up, driven), - TEGRA_MAP_MUXCONF("irtx", "uarta", up, driven), - TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcb", "sdio2", up, driven), - TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcd", "sdio2", up, driven), - TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven), - TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldc", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lhp1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lhp2", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpp", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpw0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpw2", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lvp1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("owc", "owr", up, tristate), - TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven), - TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven), - TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven), - TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate), - TEGRA_MAP_MUXCONF("sdc", "twc", up, tristate), - TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate), - TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven), - TEGRA_MAP_MUXCONF("slxa", "pcie", none, tristate), - TEGRA_MAP_MUXCONF("slxc", "spi4", none, tristate), - TEGRA_MAP_MUXCONF("slxd", "spi4", none, tristate), - TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven), - TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("spia", "gmi", down, tristate), - TEGRA_MAP_MUXCONF("spib", "gmi", down, tristate), - TEGRA_MAP_MUXCONF("spic", "gmi", up, driven), - TEGRA_MAP_MUXCONF("spid", "gmi", down, tristate), - TEGRA_MAP_MUXCONF("spie", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("spif", "rsvd4", down, tristate), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, driven), - TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uac", "rsvd4", none, driven), - TEGRA_MAP_MUXCONF("uad", "spdif", up, tristate), - TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven), - TEGRA_MAP_CONF("ck32", none, na), - TEGRA_MAP_CONF("ddrc", none, na), - TEGRA_MAP_CONF("pmca", none, na), - TEGRA_MAP_CONF("pmcb", none, na), - TEGRA_MAP_CONF("pmcc", none, na), - TEGRA_MAP_CONF("pmcd", none, na), - TEGRA_MAP_CONF("pmce", none, na), - TEGRA_MAP_CONF("xm2c", none, na), - TEGRA_MAP_CONF("xm2d", none, na), - TEGRA_MAP_CONF("ls", up, na), - TEGRA_MAP_CONF("lc", up, na), - TEGRA_MAP_CONF("ld17_0", down, na), - TEGRA_MAP_CONF("ld19_18", down, na), - TEGRA_MAP_CONF("ld21_20", down, na), - TEGRA_MAP_CONF("ld23_22", down, na), -}; - -static struct tegra_board_pinmux_conf conf = { - .maps = paz00_map, - .map_count = ARRAY_SIZE(paz00_map), -}; - -void paz00_pinmux_init(void) -{ - tegra_board_pinmux_init(&conf, NULL); -} diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 4b64af5cab2..59305516fad 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -17,72 +17,10 @@ * */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/of_serial.h> -#include <linux/clk.h> -#include <linux/dma-mapping.h> -#include <linux/gpio_keys.h> -#include <linux/pda_power.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/gpio.h> #include <linux/rfkill-gpio.h> -#include <asm/hardware/gic.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/setup.h> - -#include <mach/iomap.h> -#include <mach/irqs.h> -#include <mach/sdhci.h> - -#include "board.h" #include "board-paz00.h" -#include "clock.h" -#include "devices.h" -#include "gpio-names.h" - -static struct plat_serial8250_port debug_uart_platform_data[] = { - { - /* serial port on JP1 */ - .membase = IO_ADDRESS(TEGRA_UARTA_BASE), - .mapbase = TEGRA_UARTA_BASE, - .irq = INT_UARTA, - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - /* serial port on mini-pcie */ - .membase = IO_ADDRESS(TEGRA_UARTC_BASE), - .mapbase = TEGRA_UARTC_BASE, - .irq = INT_UARTC, - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - .flags = 0 - } -}; - -static struct platform_device debug_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = debug_uart_platform_data, - }, -}; static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { .name = "wifi_rfkill", @@ -99,137 +37,7 @@ static struct platform_device wifi_rfkill_device = { }, }; -static struct gpio_led gpio_leds[] = { - { - .name = "wifi-led", - .default_trigger = "rfkill0", - .gpio = TEGRA_WIFI_LED, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button paz00_gpio_keys_buttons[] = { - { - .code = KEY_POWER, - .gpio = TEGRA_GPIO_POWERKEY, - .active_low = 1, - .desc = "Power", - .type = EV_KEY, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data paz00_gpio_keys = { - .buttons = paz00_gpio_keys_buttons, - .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons), -}; - -static struct platform_device gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &paz00_gpio_keys, - }, -}; - -static struct platform_device *paz00_devices[] __initdata = { - &debug_uart, - &tegra_sdhci_device4, - &tegra_sdhci_device1, - &leds_gpio, - &gpio_keys_device, -}; - -static void paz00_i2c_init(void) -{ - platform_device_register(&tegra_i2c_device1); - platform_device_register(&tegra_i2c_device2); - platform_device_register(&tegra_i2c_device4); -} - -static void paz00_usb_init(void) -{ - tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST; - - platform_device_register(&tegra_ehci2_device); - platform_device_register(&tegra_ehci3_device); -} - -static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) -{ - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = 448 * SZ_1M; -} - -static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 216000000, true }, - { "uartc", "pll_p", 216000000, true }, - - { "usbd", "clk_m", 12000000, false }, - { "usb2", "clk_m", 12000000, false }, - { "usb3", "clk_m", 12000000, false }, - - { NULL, NULL, 0, 0}, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata1 = { - .cd_gpio = TEGRA_GPIO_SD1_CD, - .wp_gpio = TEGRA_GPIO_SD1_WP, - .power_gpio = TEGRA_GPIO_SD1_POWER, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, - .is_8bit = 1, -}; - void __init tegra_paz00_wifikill_init(void) { platform_device_register(&wifi_rfkill_device); } - -static void __init tegra_paz00_init(void) -{ - tegra_clk_init_from_table(paz00_clk_init_table); - - paz00_pinmux_init(); - - tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; - - platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); - tegra_paz00_wifikill_init(); - - paz00_i2c_init(); - paz00_usb_init(); -} - -MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") - .atag_offset = 0x100, - .fixup = tegra_paz00_fixup, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_paz00_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index 3c9f8da37ea..25c08ecef52 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,24 +17,9 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H -#include <mach/gpio-tegra.h> +#include "gpio-names.h" -/* SDCARD */ -#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 -#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 - -/* ULPI */ -#define TEGRA_ULPI_RST TEGRA_GPIO_PV0 - -/* WIFI */ #define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5 #define TEGRA_WIFI_RST TEGRA_GPIO_PD1 -#define TEGRA_WIFI_LED TEGRA_GPIO_PD0 - -/* WakeUp */ -#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7 - -void paz00_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c deleted file mode 100644 index 7b39511c0d4..00000000000 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * arch/arm/mach-tegra/board-trimslice-pinmux.c - * - * Copyright (C) 2011 CompuLab, Ltd. - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include <linux/kernel.h> - -#include "board-trimslice.h" -#include "board-pinmux.h" - -static struct pinctrl_map trimslice_map[] = { - TEGRA_MAP_MUXCONF("ata", "ide", none, tristate), - TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("atc", "nand", none, tristate), - TEGRA_MAP_MUXCONF("atd", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven), - TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate), - TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate), - TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate), - TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven), - TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate), - TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate), - TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate), - TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven), - TEGRA_MAP_MUXCONF("dta", "vi", none, tristate), - TEGRA_MAP_MUXCONF("dtb", "vi", none, tristate), - TEGRA_MAP_MUXCONF("dtc", "vi", none, tristate), - TEGRA_MAP_MUXCONF("dtd", "vi", none, tristate), - TEGRA_MAP_MUXCONF("dte", "vi", none, tristate), - TEGRA_MAP_MUXCONF("dtf", "i2c3", up, driven), - TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gmb", "nand", none, tristate), - TEGRA_MAP_MUXCONF("gmc", "sflash", none, driven), - TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven), - TEGRA_MAP_MUXCONF("gme", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("gpu", "uarta", none, driven), - TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven), - TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven), - TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, tristate), - TEGRA_MAP_MUXCONF("irrx", "uartb", up, tristate), - TEGRA_MAP_MUXCONF("irtx", "uartb", up, tristate), - TEGRA_MAP_MUXCONF("kbca", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("kbcb", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("kbcc", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("kbcd", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("kbce", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("kbcf", "kbc", up, tristate), - TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("owc", "rsvd2", up, tristate), - TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, tristate), - TEGRA_MAP_MUXCONF("pta", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("rm", "i2c1", up, driven), - TEGRA_MAP_MUXCONF("sdb", "pwm", na, driven), - TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven), - TEGRA_MAP_MUXCONF("sdd", "pwm", up, driven), - TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven), - TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven), - TEGRA_MAP_MUXCONF("slxc", "sdio3", none, tristate), - TEGRA_MAP_MUXCONF("slxd", "sdio3", none, tristate), - TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven), - TEGRA_MAP_MUXCONF("spdi", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("spdo", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("spia", "spi2", down, tristate), - TEGRA_MAP_MUXCONF("spib", "spi2", down, tristate), - TEGRA_MAP_MUXCONF("spic", "spi2", up, tristate), - TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate), - TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate), - TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate), - TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("uad", "irda", up, tristate), - TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate), - TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate), - TEGRA_MAP_CONF("ck32", none, na), - TEGRA_MAP_CONF("ddrc", none, na), - TEGRA_MAP_CONF("pmca", none, na), - TEGRA_MAP_CONF("pmcb", none, na), - TEGRA_MAP_CONF("pmcc", none, na), - TEGRA_MAP_CONF("pmcd", none, na), - TEGRA_MAP_CONF("pmce", none, na), - TEGRA_MAP_CONF("xm2c", none, na), - TEGRA_MAP_CONF("xm2d", none, na), - TEGRA_MAP_CONF("ls", up, na), - TEGRA_MAP_CONF("lc", up, na), - TEGRA_MAP_CONF("ld17_0", down, na), - TEGRA_MAP_CONF("ld19_18", down, na), - TEGRA_MAP_CONF("ld21_20", down, na), - TEGRA_MAP_CONF("ld23_22", down, na), -}; - -static struct tegra_board_pinmux_conf conf = { - .maps = trimslice_map, - .map_count = ARRAY_SIZE(trimslice_map), -}; - -void trimslice_pinmux_init(void) -{ - tegra_board_pinmux_init(&conf, NULL); -} diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c deleted file mode 100644 index 776aa9564d5..00000000000 --- a/arch/arm/mach-tegra/board-trimslice.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * arch/arm/mach-tegra/board-trimslice.c - * - * Copyright (C) 2011 CompuLab, Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> - * - * Based on board-harmony.c - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/of_serial.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/platform_data/tegra_usb.h> - -#include <asm/hardware/gic.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/setup.h> - -#include <mach/iomap.h> -#include <mach/sdhci.h> - -#include "board.h" -#include "clock.h" -#include "devices.h" -#include "gpio-names.h" - -#include "board-trimslice.h" - -static struct plat_serial8250_port debug_uart_platform_data[] = { - { - .membase = IO_ADDRESS(TEGRA_UARTA_BASE), - .mapbase = TEGRA_UARTA_BASE, - .irq = INT_UARTA, - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - .flags = 0 - } -}; - -static struct platform_device debug_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = debug_uart_platform_data, - }, -}; -static struct tegra_sdhci_platform_data sdhci_pdata1 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = TRIMSLICE_GPIO_SD4_CD, - .wp_gpio = TRIMSLICE_GPIO_SD4_WP, - .power_gpio = -1, -}; - -static struct platform_device trimslice_audio_device = { - .name = "tegra-snd-trimslice", - .id = 0, -}; - -static struct platform_device *trimslice_devices[] __initdata = { - &debug_uart, - &tegra_sdhci_device1, - &tegra_sdhci_device4, - &tegra_i2s_device1, - &tegra_das_device, - &trimslice_audio_device, -}; - -static struct i2c_board_info trimslice_i2c3_board_info[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, - { - I2C_BOARD_INFO("em3027", 0x56), - }, -}; - -static void trimslice_i2c_init(void) -{ - platform_device_register(&tegra_i2c_device1); - platform_device_register(&tegra_i2c_device2); - platform_device_register(&tegra_i2c_device3); - - i2c_register_board_info(2, trimslice_i2c3_board_info, - ARRAY_SIZE(trimslice_i2c3_board_info)); -} - -static void trimslice_usb_init(void) -{ - struct tegra_ehci_platform_data *pdata; - - pdata = tegra_ehci1_device.dev.platform_data; - pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE; - - tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0; - - platform_device_register(&tegra_ehci3_device); - platform_device_register(&tegra_ehci2_device); - platform_device_register(&tegra_ehci1_device); -} - -static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline, - struct meminfo *mi) -{ - mi->nr_banks = 2; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = 448 * SZ_1M; - mi->bank[1].start = SZ_512M; - mi->bank[1].size = SZ_512M; -} - -static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 216000000, true }, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { NULL, NULL, 0, 0}, -}; - -static int __init tegra_trimslice_pci_init(void) -{ - if (!machine_is_trimslice()) - return 0; - - return tegra_pcie_init(true, true); -} -subsys_initcall(tegra_trimslice_pci_init); - -static void __init tegra_trimslice_init(void) -{ - tegra_clk_init_from_table(trimslice_clk_init_table); - - trimslice_pinmux_init(); - - tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; - - platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices)); - - trimslice_i2c_init(); - trimslice_usb_init(); -} - -MACHINE_START(TRIMSLICE, "trimslice") - .atag_offset = 0x100, - .fixup = tegra_trimslice_fixup, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_trimslice_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h deleted file mode 100644 index 50f128d8777..00000000000 --- a/arch/arm/mach-tegra/board-trimslice.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-tegra/board-trimslice.h - * - * Copyright (C) 2011 CompuLab, Ltd. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H -#define _MACH_TEGRA_BOARD_TRIMSLICE_H - -#include <mach/gpio-tegra.h> - -#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ -#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ - -#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */ -#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */ - -void trimslice_pinmux_init(void); - -#endif diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index c70e65ffa36..61e9603744a 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -23,7 +23,6 @@ #include <linux/fsl_devices.h> #include <linux/serial_8250.h> #include <linux/i2c-tegra.h> -#include <asm/pmu.h> #include <mach/irqs.h> #include <mach/iomap.h> #include <mach/dma.h> @@ -516,7 +515,7 @@ static struct resource tegra_pmu_resources[] = { struct platform_device tegra_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(tegra_pmu_resources), .resource = tegra_pmu_resources, }; diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c deleted file mode 100644 index 29c5114d607..00000000000 --- a/arch/arm/mach-tegra/dma.c +++ /dev/null @@ -1,823 +0,0 @@ -/* - * arch/arm/mach-tegra/dma.c - * - * System DMA driver for NVIDIA Tegra SoCs - * - * Copyright (c) 2008-2009, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/err.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <mach/dma.h> -#include <mach/irqs.h> -#include <mach/iomap.h> -#include <mach/suspend.h> - -#include "apbio.h" - -#define APB_DMA_GEN 0x000 -#define GEN_ENABLE (1<<31) - -#define APB_DMA_CNTRL 0x010 - -#define APB_DMA_IRQ_MASK 0x01c - -#define APB_DMA_IRQ_MASK_SET 0x020 - -#define APB_DMA_CHAN_CSR 0x000 -#define CSR_ENB (1<<31) -#define CSR_IE_EOC (1<<30) -#define CSR_HOLD (1<<29) -#define CSR_DIR (1<<28) -#define CSR_ONCE (1<<27) -#define CSR_FLOW (1<<21) -#define CSR_REQ_SEL_SHIFT 16 -#define CSR_WCOUNT_SHIFT 2 -#define CSR_WCOUNT_MASK 0xFFFC - -#define APB_DMA_CHAN_STA 0x004 -#define STA_BUSY (1<<31) -#define STA_ISE_EOC (1<<30) -#define STA_HALT (1<<29) -#define STA_PING_PONG (1<<28) -#define STA_COUNT_SHIFT 2 -#define STA_COUNT_MASK 0xFFFC - -#define APB_DMA_CHAN_AHB_PTR 0x010 - -#define APB_DMA_CHAN_AHB_SEQ 0x014 -#define AHB_SEQ_INTR_ENB (1<<31) -#define AHB_SEQ_BUS_WIDTH_SHIFT 28 -#define AHB_SEQ_BUS_WIDTH_MASK (0x7<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_BUS_WIDTH_8 (0<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_BUS_WIDTH_16 (1<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_BUS_WIDTH_32 (2<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_BUS_WIDTH_64 (3<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_BUS_WIDTH_128 (4<<AHB_SEQ_BUS_WIDTH_SHIFT) -#define AHB_SEQ_DATA_SWAP (1<<27) -#define AHB_SEQ_BURST_MASK (0x7<<24) -#define AHB_SEQ_BURST_1 (4<<24) -#define AHB_SEQ_BURST_4 (5<<24) -#define AHB_SEQ_BURST_8 (6<<24) -#define AHB_SEQ_DBL_BUF (1<<19) -#define AHB_SEQ_WRAP_SHIFT 16 -#define AHB_SEQ_WRAP_MASK (0x7<<AHB_SEQ_WRAP_SHIFT) - -#define APB_DMA_CHAN_APB_PTR 0x018 - -#define APB_DMA_CHAN_APB_SEQ 0x01c -#define APB_SEQ_BUS_WIDTH_SHIFT 28 -#define APB_SEQ_BUS_WIDTH_MASK (0x7<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_BUS_WIDTH_8 (0<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_BUS_WIDTH_16 (1<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_BUS_WIDTH_32 (2<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_BUS_WIDTH_64 (3<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_BUS_WIDTH_128 (4<<APB_SEQ_BUS_WIDTH_SHIFT) -#define APB_SEQ_DATA_SWAP (1<<27) -#define APB_SEQ_WRAP_SHIFT 16 -#define APB_SEQ_WRAP_MASK (0x7<<APB_SEQ_WRAP_SHIFT) - -#define TEGRA_SYSTEM_DMA_CH_NR 16 -#define TEGRA_SYSTEM_DMA_AVP_CH_NUM 4 -#define TEGRA_SYSTEM_DMA_CH_MIN 0 -#define TEGRA_SYSTEM_DMA_CH_MAX \ - (TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1) - -#define NV_DMA_MAX_TRASFER_SIZE 0x10000 - -static const unsigned int ahb_addr_wrap_table[8] = { - 0, 32, 64, 128, 256, 512, 1024, 2048 -}; - -static const unsigned int apb_addr_wrap_table[8] = { - 0, 1, 2, 4, 8, 16, 32, 64 -}; - -static const unsigned int bus_width_table[5] = { - 8, 16, 32, 64, 128 -}; - -#define TEGRA_DMA_NAME_SIZE 16 -struct tegra_dma_channel { - struct list_head list; - int id; - spinlock_t lock; - char name[TEGRA_DMA_NAME_SIZE]; - void __iomem *addr; - int mode; - int irq; - int req_transfer_count; -}; - -#define NV_DMA_MAX_CHANNELS 32 - -static bool tegra_dma_initialized; -static DEFINE_MUTEX(tegra_dma_lock); -static DEFINE_SPINLOCK(enable_lock); - -static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS); -static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS]; - -static void tegra_dma_update_hw(struct tegra_dma_channel *ch, - struct tegra_dma_req *req); -static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, - struct tegra_dma_req *req); -static void tegra_dma_stop(struct tegra_dma_channel *ch); - -void tegra_dma_flush(struct tegra_dma_channel *ch) -{ -} -EXPORT_SYMBOL(tegra_dma_flush); - -void tegra_dma_dequeue(struct tegra_dma_channel *ch) -{ - struct tegra_dma_req *req; - - if (tegra_dma_is_empty(ch)) - return; - - req = list_entry(ch->list.next, typeof(*req), node); - - tegra_dma_dequeue_req(ch, req); - return; -} - -static void tegra_dma_stop(struct tegra_dma_channel *ch) -{ - u32 csr; - u32 status; - - csr = readl(ch->addr + APB_DMA_CHAN_CSR); - csr &= ~CSR_IE_EOC; - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - - csr &= ~CSR_ENB; - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - - status = readl(ch->addr + APB_DMA_CHAN_STA); - if (status & STA_ISE_EOC) - writel(status, ch->addr + APB_DMA_CHAN_STA); -} - -static int tegra_dma_cancel(struct tegra_dma_channel *ch) -{ - unsigned long irq_flags; - - spin_lock_irqsave(&ch->lock, irq_flags); - while (!list_empty(&ch->list)) - list_del(ch->list.next); - - tegra_dma_stop(ch); - - spin_unlock_irqrestore(&ch->lock, irq_flags); - return 0; -} - -static unsigned int get_channel_status(struct tegra_dma_channel *ch, - struct tegra_dma_req *req, bool is_stop_dma) -{ - void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); - unsigned int status; - - if (is_stop_dma) { - /* - * STOP the DMA and get the transfer count. - * Getting the transfer count is tricky. - * - Globally disable DMA on all channels - * - Read the channel's status register to know the number - * of pending bytes to be transfered. - * - Stop the dma channel - * - Globally re-enable DMA to resume other transfers - */ - spin_lock(&enable_lock); - writel(0, addr + APB_DMA_GEN); - udelay(20); - status = readl(ch->addr + APB_DMA_CHAN_STA); - tegra_dma_stop(ch); - writel(GEN_ENABLE, addr + APB_DMA_GEN); - spin_unlock(&enable_lock); - if (status & STA_ISE_EOC) { - pr_err("Got Dma Int here clearing"); - writel(status, ch->addr + APB_DMA_CHAN_STA); - } - req->status = TEGRA_DMA_REQ_ERROR_ABORTED; - } else { - status = readl(ch->addr + APB_DMA_CHAN_STA); - } - return status; -} - -/* should be called with the channel lock held */ -static unsigned int dma_active_count(struct tegra_dma_channel *ch, - struct tegra_dma_req *req, unsigned int status) -{ - unsigned int to_transfer; - unsigned int req_transfer_count; - unsigned int bytes_transferred; - - to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1; - req_transfer_count = ch->req_transfer_count + 1; - bytes_transferred = req_transfer_count; - if (status & STA_BUSY) - bytes_transferred -= to_transfer; - /* - * In continuous transfer mode, DMA only tracks the count of the - * half DMA buffer. So, if the DMA already finished half the DMA - * then add the half buffer to the completed count. - */ - if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) { - if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) - bytes_transferred += req_transfer_count; - if (status & STA_ISE_EOC) - bytes_transferred += req_transfer_count; - } - bytes_transferred *= 4; - return bytes_transferred; -} - -int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, - struct tegra_dma_req *_req) -{ - unsigned int status; - struct tegra_dma_req *req = NULL; - int found = 0; - unsigned long irq_flags; - int stop = 0; - - spin_lock_irqsave(&ch->lock, irq_flags); - - if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req) - stop = 1; - - list_for_each_entry(req, &ch->list, node) { - if (req == _req) { - list_del(&req->node); - found = 1; - break; - } - } - if (!found) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return 0; - } - - if (!stop) - goto skip_stop_dma; - - status = get_channel_status(ch, req, true); - req->bytes_transferred = dma_active_count(ch, req, status); - - if (!list_empty(&ch->list)) { - /* if the list is not empty, queue the next request */ - struct tegra_dma_req *next_req; - next_req = list_entry(ch->list.next, - typeof(*next_req), node); - tegra_dma_update_hw(ch, next_req); - } - -skip_stop_dma: - req->status = -TEGRA_DMA_REQ_ERROR_ABORTED; - - spin_unlock_irqrestore(&ch->lock, irq_flags); - - /* Callback should be called without any lock */ - req->complete(req); - return 0; -} -EXPORT_SYMBOL(tegra_dma_dequeue_req); - -bool tegra_dma_is_empty(struct tegra_dma_channel *ch) -{ - unsigned long irq_flags; - bool is_empty; - - spin_lock_irqsave(&ch->lock, irq_flags); - if (list_empty(&ch->list)) - is_empty = true; - else - is_empty = false; - spin_unlock_irqrestore(&ch->lock, irq_flags); - return is_empty; -} -EXPORT_SYMBOL(tegra_dma_is_empty); - -bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch, - struct tegra_dma_req *_req) -{ - unsigned long irq_flags; - struct tegra_dma_req *req; - - spin_lock_irqsave(&ch->lock, irq_flags); - list_for_each_entry(req, &ch->list, node) { - if (req == _req) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return true; - } - } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return false; -} -EXPORT_SYMBOL(tegra_dma_is_req_inflight); - -int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, - struct tegra_dma_req *req) -{ - unsigned long irq_flags; - struct tegra_dma_req *_req; - int start_dma = 0; - - if (req->size > NV_DMA_MAX_TRASFER_SIZE || - req->source_addr & 0x3 || req->dest_addr & 0x3) { - pr_err("Invalid DMA request for channel %d\n", ch->id); - return -EINVAL; - } - - spin_lock_irqsave(&ch->lock, irq_flags); - - list_for_each_entry(_req, &ch->list, node) { - if (req == _req) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return -EEXIST; - } - } - - req->bytes_transferred = 0; - req->status = 0; - req->buffer_status = 0; - if (list_empty(&ch->list)) - start_dma = 1; - - list_add_tail(&req->node, &ch->list); - - if (start_dma) - tegra_dma_update_hw(ch, req); - - spin_unlock_irqrestore(&ch->lock, irq_flags); - - return 0; -} -EXPORT_SYMBOL(tegra_dma_enqueue_req); - -struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) -{ - int channel; - struct tegra_dma_channel *ch = NULL; - - if (!tegra_dma_initialized) - return NULL; - - mutex_lock(&tegra_dma_lock); - - /* first channel is the shared channel */ - if (mode & TEGRA_DMA_SHARED) { - channel = TEGRA_SYSTEM_DMA_CH_MIN; - } else { - channel = find_first_zero_bit(channel_usage, - ARRAY_SIZE(dma_channels)); - if (channel >= ARRAY_SIZE(dma_channels)) - goto out; - } - __set_bit(channel, channel_usage); - ch = &dma_channels[channel]; - ch->mode = mode; - -out: - mutex_unlock(&tegra_dma_lock); - return ch; -} -EXPORT_SYMBOL(tegra_dma_allocate_channel); - -void tegra_dma_free_channel(struct tegra_dma_channel *ch) -{ - if (ch->mode & TEGRA_DMA_SHARED) - return; - tegra_dma_cancel(ch); - mutex_lock(&tegra_dma_lock); - __clear_bit(ch->id, channel_usage); - mutex_unlock(&tegra_dma_lock); -} -EXPORT_SYMBOL(tegra_dma_free_channel); - -static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, - struct tegra_dma_req *req) -{ - u32 apb_ptr; - u32 ahb_ptr; - - if (req->to_memory) { - apb_ptr = req->source_addr; - ahb_ptr = req->dest_addr; - } else { - apb_ptr = req->dest_addr; - ahb_ptr = req->source_addr; - } - writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); - writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); - - req->status = TEGRA_DMA_REQ_INFLIGHT; - return; -} - -static void tegra_dma_update_hw(struct tegra_dma_channel *ch, - struct tegra_dma_req *req) -{ - int ahb_addr_wrap; - int apb_addr_wrap; - int ahb_bus_width; - int apb_bus_width; - int index; - - u32 ahb_seq; - u32 apb_seq; - u32 ahb_ptr; - u32 apb_ptr; - u32 csr; - - csr = CSR_IE_EOC | CSR_FLOW; - ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1; - apb_seq = 0; - - csr |= req->req_sel << CSR_REQ_SEL_SHIFT; - - /* One shot mode is always single buffered, - * continuous mode is always double buffered - * */ - if (ch->mode & TEGRA_DMA_MODE_ONESHOT) { - csr |= CSR_ONCE; - ch->req_transfer_count = (req->size >> 2) - 1; - } else { - ahb_seq |= AHB_SEQ_DBL_BUF; - - /* In double buffered mode, we set the size to half the - * requested size and interrupt when half the buffer - * is full */ - ch->req_transfer_count = (req->size >> 3) - 1; - } - - csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT; - - if (req->to_memory) { - apb_ptr = req->source_addr; - ahb_ptr = req->dest_addr; - - apb_addr_wrap = req->source_wrap; - ahb_addr_wrap = req->dest_wrap; - apb_bus_width = req->source_bus_width; - ahb_bus_width = req->dest_bus_width; - - } else { - csr |= CSR_DIR; - apb_ptr = req->dest_addr; - ahb_ptr = req->source_addr; - - apb_addr_wrap = req->dest_wrap; - ahb_addr_wrap = req->source_wrap; - apb_bus_width = req->dest_bus_width; - ahb_bus_width = req->source_bus_width; - } - - apb_addr_wrap >>= 2; - ahb_addr_wrap >>= 2; - - /* set address wrap for APB size */ - index = 0; - do { - if (apb_addr_wrap_table[index] == apb_addr_wrap) - break; - index++; - } while (index < ARRAY_SIZE(apb_addr_wrap_table)); - BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table)); - apb_seq |= index << APB_SEQ_WRAP_SHIFT; - - /* set address wrap for AHB size */ - index = 0; - do { - if (ahb_addr_wrap_table[index] == ahb_addr_wrap) - break; - index++; - } while (index < ARRAY_SIZE(ahb_addr_wrap_table)); - BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table)); - ahb_seq |= index << AHB_SEQ_WRAP_SHIFT; - - for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { - if (bus_width_table[index] == ahb_bus_width) - break; - } - BUG_ON(index == ARRAY_SIZE(bus_width_table)); - ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT; - - for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { - if (bus_width_table[index] == apb_bus_width) - break; - } - BUG_ON(index == ARRAY_SIZE(bus_width_table)); - apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT; - - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ); - writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); - writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ); - writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); - - csr |= CSR_ENB; - writel(csr, ch->addr + APB_DMA_CHAN_CSR); - - req->status = TEGRA_DMA_REQ_INFLIGHT; -} - -static void handle_oneshot_dma(struct tegra_dma_channel *ch) -{ - struct tegra_dma_req *req; - unsigned long irq_flags; - - spin_lock_irqsave(&ch->lock, irq_flags); - if (list_empty(&ch->list)) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; - } - - req = list_entry(ch->list.next, typeof(*req), node); - if (req) { - int bytes_transferred; - - bytes_transferred = ch->req_transfer_count; - bytes_transferred += 1; - bytes_transferred <<= 2; - - list_del(&req->node); - req->bytes_transferred = bytes_transferred; - req->status = TEGRA_DMA_REQ_SUCCESS; - - spin_unlock_irqrestore(&ch->lock, irq_flags); - /* Callback should be called without any lock */ - pr_debug("%s: transferred %d bytes\n", __func__, - req->bytes_transferred); - req->complete(req); - spin_lock_irqsave(&ch->lock, irq_flags); - } - - if (!list_empty(&ch->list)) { - req = list_entry(ch->list.next, typeof(*req), node); - /* the complete function we just called may have enqueued - another req, in which case dma has already started */ - if (req->status != TEGRA_DMA_REQ_INFLIGHT) - tegra_dma_update_hw(ch, req); - } - spin_unlock_irqrestore(&ch->lock, irq_flags); -} - -static void handle_continuous_dma(struct tegra_dma_channel *ch) -{ - struct tegra_dma_req *req; - unsigned long irq_flags; - - spin_lock_irqsave(&ch->lock, irq_flags); - if (list_empty(&ch->list)) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; - } - - req = list_entry(ch->list.next, typeof(*req), node); - if (req) { - if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) { - bool is_dma_ping_complete; - is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA) - & STA_PING_PONG) ? true : false; - if (req->to_memory) - is_dma_ping_complete = !is_dma_ping_complete; - /* Out of sync - Release current buffer */ - if (!is_dma_ping_complete) { - int bytes_transferred; - - bytes_transferred = ch->req_transfer_count; - bytes_transferred += 1; - bytes_transferred <<= 3; - req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL; - req->bytes_transferred = bytes_transferred; - req->status = TEGRA_DMA_REQ_SUCCESS; - tegra_dma_stop(ch); - - if (!list_is_last(&req->node, &ch->list)) { - struct tegra_dma_req *next_req; - - next_req = list_entry(req->node.next, - typeof(*next_req), node); - tegra_dma_update_hw(ch, next_req); - } - - list_del(&req->node); - - /* DMA lock is NOT held when callbak is called */ - spin_unlock_irqrestore(&ch->lock, irq_flags); - req->complete(req); - return; - } - /* Load the next request into the hardware, if available - * */ - if (!list_is_last(&req->node, &ch->list)) { - struct tegra_dma_req *next_req; - - next_req = list_entry(req->node.next, - typeof(*next_req), node); - tegra_dma_update_hw_partial(ch, next_req); - } - req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL; - req->status = TEGRA_DMA_REQ_SUCCESS; - /* DMA lock is NOT held when callback is called */ - spin_unlock_irqrestore(&ch->lock, irq_flags); - if (likely(req->threshold)) - req->threshold(req); - return; - - } else if (req->buffer_status == - TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) { - /* Callback when the buffer is completely full (i.e on - * the second interrupt */ - int bytes_transferred; - - bytes_transferred = ch->req_transfer_count; - bytes_transferred += 1; - bytes_transferred <<= 3; - - req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL; - req->bytes_transferred = bytes_transferred; - req->status = TEGRA_DMA_REQ_SUCCESS; - list_del(&req->node); - - /* DMA lock is NOT held when callbak is called */ - spin_unlock_irqrestore(&ch->lock, irq_flags); - req->complete(req); - return; - - } else { - BUG(); - } - } - spin_unlock_irqrestore(&ch->lock, irq_flags); -} - -static irqreturn_t dma_isr(int irq, void *data) -{ - struct tegra_dma_channel *ch = data; - unsigned long status; - - status = readl(ch->addr + APB_DMA_CHAN_STA); - if (status & STA_ISE_EOC) - writel(status, ch->addr + APB_DMA_CHAN_STA); - else { - pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id); - return IRQ_HANDLED; - } - return IRQ_WAKE_THREAD; -} - -static irqreturn_t dma_thread_fn(int irq, void *data) -{ - struct tegra_dma_channel *ch = data; - - if (ch->mode & TEGRA_DMA_MODE_ONESHOT) - handle_oneshot_dma(ch); - else - handle_continuous_dma(ch); - - - return IRQ_HANDLED; -} - -int __init tegra_dma_init(void) -{ - int ret = 0; - int i; - unsigned int irq; - void __iomem *addr; - struct clk *c; - - bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS); - - c = clk_get_sys("tegra-apbdma", NULL); - if (IS_ERR(c)) { - pr_err("Unable to get clock for APB DMA\n"); - ret = PTR_ERR(c); - goto fail; - } - ret = clk_prepare_enable(c); - if (ret != 0) { - pr_err("Unable to enable clock for APB DMA\n"); - goto fail; - } - - addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); - writel(GEN_ENABLE, addr + APB_DMA_GEN); - writel(0, addr + APB_DMA_CNTRL); - writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX), - addr + APB_DMA_IRQ_MASK_SET); - - for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { - struct tegra_dma_channel *ch = &dma_channels[i]; - - ch->id = i; - snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i); - - ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + - TEGRA_APB_DMA_CH0_SIZE * i); - - spin_lock_init(&ch->lock); - INIT_LIST_HEAD(&ch->list); - - irq = INT_APB_DMA_CH0 + i; - ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0, - dma_channels[i].name, ch); - if (ret) { - pr_err("Failed to register IRQ %d for DMA %d\n", - irq, i); - goto fail; - } - ch->irq = irq; - - __clear_bit(i, channel_usage); - } - /* mark the shared channel allocated */ - __set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage); - - tegra_dma_initialized = true; - - return 0; -fail: - writel(0, addr + APB_DMA_GEN); - for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { - struct tegra_dma_channel *ch = &dma_channels[i]; - if (ch->irq) - free_irq(ch->irq, ch); - } - return ret; -} -postcore_initcall(tegra_dma_init); - -#ifdef CONFIG_PM -static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3]; - -void tegra_dma_suspend(void) -{ - void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); - u32 *ctx = apb_dma; - int i; - - *ctx++ = readl(addr + APB_DMA_GEN); - *ctx++ = readl(addr + APB_DMA_CNTRL); - *ctx++ = readl(addr + APB_DMA_IRQ_MASK); - - for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) { - addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + - TEGRA_APB_DMA_CH0_SIZE * i); - - *ctx++ = readl(addr + APB_DMA_CHAN_CSR); - *ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR); - *ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ); - *ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR); - *ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ); - } -} - -void tegra_dma_resume(void) -{ - void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); - u32 *ctx = apb_dma; - int i; - - writel(*ctx++, addr + APB_DMA_GEN); - writel(*ctx++, addr + APB_DMA_CNTRL); - writel(*ctx++, addr + APB_DMA_IRQ_MASK); - - for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) { - addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + - TEGRA_APB_DMA_CH0_SIZE * i); - - writel(*ctx++, addr + APB_DMA_CHAN_CSR); - writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR); - writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ); - writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR); - writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ); - } -} - -#endif diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index f946d129423..0b7db174a5d 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -93,9 +93,9 @@ void tegra_init_fuse(void) { u32 id; - u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg |= 1 << 28; - writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 9077092812c..3081cc6dda3 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -51,101 +51,4 @@ #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 -struct tegra_dma_req; -struct tegra_dma_channel; - -enum tegra_dma_mode { - TEGRA_DMA_SHARED = 1, - TEGRA_DMA_MODE_CONTINOUS = 2, - TEGRA_DMA_MODE_ONESHOT = 4, -}; - -enum tegra_dma_req_error { - TEGRA_DMA_REQ_SUCCESS = 0, - TEGRA_DMA_REQ_ERROR_ABORTED, - TEGRA_DMA_REQ_INFLIGHT, -}; - -enum tegra_dma_req_buff_status { - TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0, - TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL, - TEGRA_DMA_REQ_BUF_STATUS_FULL, -}; - -struct tegra_dma_req { - struct list_head node; - unsigned int modid; - int instance; - - /* Called when the req is complete and from the DMA ISR context. - * When this is called the req structure is no longer queued by - * the DMA channel. - * - * State of the DMA depends on the number of req it has. If there are - * no DMA requests queued up, then it will STOP the DMA. It there are - * more requests in the DMA, then it will queue the next request. - */ - void (*complete)(struct tegra_dma_req *req); - - /* This is a called from the DMA ISR context when the DMA is still in - * progress and is actively filling same buffer. - * - * In case of continuous mode receive, this threshold is 1/2 the buffer - * size. In other cases, this will not even be called as there is no - * hardware support for it. - * - * In the case of continuous mode receive, if there is next req already - * queued, DMA programs the HW to use that req when this req is - * completed. If there is no "next req" queued, then DMA ISR doesn't do - * anything before calling this callback. - * - * This is mainly used by the cases, where the clients has queued - * only one req and want to get some sort of DMA threshold - * callback to program the next buffer. - * - */ - void (*threshold)(struct tegra_dma_req *req); - - /* 1 to copy to memory. - * 0 to copy from the memory to device FIFO */ - int to_memory; - - void *virt_addr; - - unsigned long source_addr; - unsigned long dest_addr; - unsigned long dest_wrap; - unsigned long source_wrap; - unsigned long source_bus_width; - unsigned long dest_bus_width; - unsigned long req_sel; - unsigned int size; - - /* Updated by the DMA driver on the conpletion of the request. */ - int bytes_transferred; - int status; - - /* DMA completion tracking information */ - int buffer_status; - - /* Client specific data */ - void *dev; -}; - -int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, - struct tegra_dma_req *req); -int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, - struct tegra_dma_req *req); -void tegra_dma_dequeue(struct tegra_dma_channel *ch); -void tegra_dma_flush(struct tegra_dma_channel *ch); - -bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch, - struct tegra_dma_req *req); -bool tegra_dma_is_empty(struct tegra_dma_channel *ch); - -struct tegra_dma_channel *tegra_dma_allocate_channel(int mode); -void tegra_dma_free_channel(struct tegra_dma_channel *ch); - -int __init tegra_dma_init(void); - #endif diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h deleted file mode 100644 index fe700f9ce7d..00000000000 --- a/arch/arm/mach-tegra/include/mach/io.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/io.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_IO_H -#define __MACH_TEGRA_IO_H - -#define IO_SPACE_LIMIT 0xffff - -#ifndef __ASSEMBLER__ - -#ifdef CONFIG_TEGRA_PCI -extern void __iomem *tegra_pcie_io_base; - -static inline void __iomem *__io(unsigned long addr) -{ - return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT); -} -#else -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#endif - -#define __io(a) __io(a) - -#endif - -#endif diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 7e76da73121..fee3a94c454 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -303,6 +303,9 @@ #define IO_APB_VIRT IOMEM(0xFE300000) #define IO_APB_SIZE SZ_1M +#define TEGRA_PCIE_BASE 0x80000000 +#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M) + #define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index d3ad5150d66..3463fb5b79c 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -171,8 +171,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); * 0x90000000 - 0x9fffffff - non-prefetchable memory * 0xa0000000 - 0xbfffffff - prefetchable memory */ -#define TEGRA_PCIE_BASE 0x80000000 - #define PCIE_REGS_SZ SZ_16K #define PCIE_CFG_OFF PCIE_REGS_SZ #define PCIE_CFG_SZ SZ_1M @@ -180,8 +178,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); #define PCIE_EXT_CFG_SZ SZ_1M #define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ) -#define MMIO_BASE (TEGRA_PCIE_BASE + SZ_4M) -#define MMIO_SIZE SZ_64K #define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M) #define MEM_SIZE_0 SZ_128M #define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0) @@ -204,10 +200,9 @@ struct tegra_pcie_port { bool link_up; - char io_space_name[16]; char mem_space_name[16]; char prefetch_space_name[20]; - struct resource res[3]; + struct resource res[2]; }; struct tegra_pcie_info { @@ -223,17 +218,7 @@ struct tegra_pcie_info { struct clk *pll_e; }; -static struct tegra_pcie_info tegra_pcie = { - .res_mmio = { - .name = "PCI IO", - .start = MMIO_BASE, - .end = MMIO_BASE + MMIO_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -void __iomem *tegra_pcie_io_base; -EXPORT_SYMBOL(tegra_pcie_io_base); +static struct tegra_pcie_info tegra_pcie; static inline void afi_writel(u32 value, unsigned long offset) { @@ -391,24 +376,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp = tegra_pcie.port + nr; pp->root_bus_nr = sys->busnr; - /* - * IORESOURCE_IO - */ - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d I/O", pp->index); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - if (pp->index == 0) { - pp->res[0].start = PCIBIOS_MIN_IO; - pp->res[0].end = pp->res[0].start + SZ_32K - 1; - } else { - pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K; - pp->res[0].end = IO_SPACE_LIMIT; - } - pp->res[0].flags = IORESOURCE_IO; - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE); /* * IORESOURCE_MEM @@ -416,18 +384,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d MEM", pp->index); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; + pp->res[0].name = pp->mem_space_name; if (pp->index == 0) { - pp->res[1].start = MEM_BASE_0; - pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1; + pp->res[0].start = MEM_BASE_0; + pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1; } else { - pp->res[1].start = MEM_BASE_1; - pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1; + pp->res[0].start = MEM_BASE_1; + pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1; } - pp->res[1].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[1])) + pp->res[0].flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res[0])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset); /* * IORESOURCE_MEM | IORESOURCE_PREFETCH @@ -435,18 +403,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name), "PCIe %d PREFETCH MEM", pp->index); pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0; - pp->res[2].name = pp->prefetch_space_name; + pp->res[1].name = pp->prefetch_space_name; if (pp->index == 0) { - pp->res[2].start = PREFETCH_MEM_BASE_0; - pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1; + pp->res[1].start = PREFETCH_MEM_BASE_0; + pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1; } else { - pp->res[2].start = PREFETCH_MEM_BASE_1; - pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1; + pp->res[1].start = PREFETCH_MEM_BASE_1; + pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1; } - pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - if (request_resource(&iomem_resource, &pp->res[2])) + pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } @@ -541,8 +509,8 @@ static void tegra_pcie_setup_translations(void) /* Bar 2: downstream IO bar */ fpci_bar = ((__u32)0xfdfc << 16); - size = MMIO_SIZE; - axi_address = MMIO_BASE; + size = SZ_128K; + axi_address = TEGRA_PCIE_IO_BASE; afi_writel(axi_address, AFI_AXI_BAR2_START); afi_writel(size >> 12, AFI_AXI_BAR2_SZ); afi_writel(fpci_bar, AFI_FPCI_BAR2); @@ -776,7 +744,6 @@ static void tegra_pcie_clocks_put(void) static int __init tegra_pcie_get_resources(void) { - struct resource *res_mmio = &tegra_pcie.res_mmio; int err; err = tegra_pcie_clocks_get(); @@ -798,34 +765,16 @@ static int __init tegra_pcie_get_resources(void) goto err_map_reg; } - err = request_resource(&iomem_resource, res_mmio); - if (err) { - pr_err("PCIE: Failed to request resources: %d\n", err); - goto err_req_io; - } - - tegra_pcie_io_base = ioremap_nocache(res_mmio->start, - resource_size(res_mmio)); - if (tegra_pcie_io_base == NULL) { - pr_err("PCIE: Failed to map IO\n"); - err = -ENOMEM; - goto err_map_io; - } - err = request_irq(INT_PCIE_INTR, tegra_pcie_isr, IRQF_SHARED, "PCIE", &tegra_pcie); if (err) { pr_err("PCIE: Failed to register IRQ: %d\n", err); - goto err_irq; + goto err_req_io; } set_irq_flags(INT_PCIE_INTR, IRQF_VALID); return 0; -err_irq: - iounmap(tegra_pcie_io_base); -err_map_io: - release_resource(&tegra_pcie.res_mmio); err_req_io: iounmap(tegra_pcie.regs); err_map_reg: diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 54d8f34fdee..f7e12ede008 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,6 +1,6 @@ if ARCH_U300 -menu "ST-Ericsson AB U300/U330/U335/U365 Platform" +menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" @@ -10,46 +10,7 @@ config MACH_U300 select PINCTRL_U300 select PINCTRL_COH901 -comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" - -choice - prompt "U300/U330/U335/U365 system type" - default MACH_U300_BS2X - ---help--- - You need to select the target system, i.e. the - U300/U330/U335/U365 board that you want to compile your kernel - for. - -config MACH_U300_BS2X - bool "S26/S26/B25/B26 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S26/S25 test products. (Also works on - B26/B25 big boards.) - -config MACH_U300_BS330 - bool "S330/B330 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S330/B330 test products. - -config MACH_U300_BS335 - bool "S335/B335 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S335/B335 test products. - -config MACH_U300_BS365 - bool "S365/B365 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S365/B365 test products. - -endchoice +comment "ST-Ericsson U300/U335 Feature Selections" config U300_DEBUG bool "Debug support for U300" diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 7e47d37aeb0..5a86c58da39 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_U300) += u300.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 03acf1883ec..ef6f602b7e4 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,7 +3,7 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson SA + * Copyright (C) 2007-2012 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,23 +31,26 @@ #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> +#include <linux/platform_data/pinctrl-coh901.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/hardware/vic.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> #include <mach/coh901318.h> #include <mach/hardware.h> #include <mach/syscon.h> -#include <mach/dma_channels.h> -#include <mach/gpio-u300.h> +#include <mach/irqs.h> +#include "timer.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" +#include "dma_channels.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -76,7 +79,7 @@ static struct map_desc u300_io_desc[] __initdata = { }, }; -void __init u300_map_io(void) +static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); /* We enable a real big DMA buffer if need be. */ @@ -101,7 +104,6 @@ static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ -#ifdef CONFIG_MACH_U300_BS335 static struct amba_pl011_data uart1_plat_data = { #ifdef CONFIG_COH901318 .dma_filter = coh901318_filter_id, @@ -113,7 +115,6 @@ static struct amba_pl011_data uart1_plat_data = { /* Fast device at 0x7000 offset */ static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, { IRQ_U300_UART1 }, &uart1_plat_data); -#endif /* AHB device at 0x4000 offset */ static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); @@ -152,9 +153,7 @@ static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, */ static struct amba_device *amba_devs[] __initdata = { &uart0_device, -#ifdef CONFIG_MACH_U300_BS335 &uart1_device, -#endif &pl022_device, &pl172_device, &mmcsd_device, @@ -188,7 +187,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -201,8 +199,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, -#endif -#ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", .start = IRQ_U300_GPIO_PORT5, @@ -215,7 +211,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT6, .flags = IORESOURCE_IRQ, }, -#endif /* CONFIG_MACH_U300_BS335 */ }; static struct resource keypad_resources[] = { @@ -323,7 +318,6 @@ static struct resource dma_resource[] = { } }; -#ifdef CONFIG_MACH_U300_BS335 /* points out all dma slave channels. * Syntax is [A1, B1, A2, B2, .... ,-1,-1] * Select all channels from A to B, end of list is marked with -1,-1 @@ -336,14 +330,6 @@ static int dma_slave_channels[] = { static int dma_memcpy_channels[] = { U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; -#else /* CONFIG_MACH_U300_BS335 */ - -static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1}; -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1}; - -#endif - /** register dma for memory access * * active 1 means dma intends to access memory @@ -1395,7 +1381,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .param.ctrl_lli = flags_memcpy_lli, .param.ctrl_lli_last = flags_memcpy_lli_last, }, -#ifdef CONFIG_MACH_U300_BS335 { .number = U300_DMA_UART1_TX, .name = "UART1 TX", @@ -1406,28 +1391,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "UART1 RX", .priority_high = 0, } -#else - { - .number = U300_DMA_GENERAL_PURPOSE_9, - .name = "GENERAL 09", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_10, - .name = "GENERAL 10", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - } -#endif }; @@ -1480,18 +1443,7 @@ static struct platform_device pinctrl_device = { * GPIO block, with different number of ports. */ static struct u300_gpio_platform u300_gpio_plat = { -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) - .variant = U300_GPIO_COH901335, - .ports = 3, -#endif -#ifdef CONFIG_MACH_U300_BS335 - .variant = U300_GPIO_COH901571_3_BS335, .ports = 7, -#endif -#ifdef CONFIG_MACH_U300_BS365 - .variant = U300_GPIO_COH901571_3_BS365, - .ports = 5, -#endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, .pinctrl_device = &pinctrl_device, @@ -1651,7 +1603,7 @@ static struct platform_device *platform_devs[] __initdata = { * together so some interrupts are connected to the first one and some * to the second one. */ -void __init u300_init_irq(void) +static void __init u300_init_irq(void) { u32 mask[2] = {0, 0}; struct clk *clk; @@ -1756,29 +1708,11 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS330 - if ((val & 0xFF00U) != 0xd800) { - printk(KERN_ERR "Platform configured for BS330 " \ - "with DB3200 but %s detected, expect problems!", - chipname); - } -#endif -#ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } -#endif -#ifdef CONFIG_MACH_U300_BS365 - if ((val & 0xFF00U) != 0xe800) { - printk(KERN_ERR "Platform configured for BS365 " \ - "with DB3210 but %s detected, expect problems!", - chipname); - } -#endif - - } /* @@ -1811,7 +1745,7 @@ static void __init u300_assign_physmem(void) } } -void __init u300_init_devices(void) +static void __init u300_init_machine(void) { int i; u16 val; @@ -1852,7 +1786,7 @@ void __init u300_init_devices(void) /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); -void u300_restart(char mode, const char *cmd) +static void u300_restart(char mode, const char *cmd) { switch (mode) { case 's': @@ -1868,3 +1802,15 @@ void u300_restart(char mode, const char *cmd) /* Wait for system do die/reset. */ while (1); } + +MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") + /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ + .atag_offset = 0x100, + .map_io = u300_map_io, + .nr_irqs = NR_IRQS_U300, + .init_irq = u300_init_irq, + .handle_irq = vic_handle_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, + .restart = u300_restart, +MACHINE_END diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h index b239149ba0d..4e8a88fbca4 100644 --- a/arch/arm/mach-u300/include/mach/dma_channels.h +++ b/arch/arm/mach-u300/dma_channels.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/dma_channels.h * * - * Copyright (C) 2007-2009 ST-Ericsson + * Copyright (C) 2007-2012 ST-Ericsson * License terms: GNU General Public License (GPL) version 2 * Map file for the U300 dma driver. * Author: Per Friden <per.friden@stericsson.com> @@ -50,19 +50,10 @@ #define U300_DMA_GENERAL_PURPOSE_6 35 #define U300_DMA_GENERAL_PURPOSE_7 36 #define U300_DMA_GENERAL_PURPOSE_8 37 -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_UART1_TX 38 #define U300_DMA_UART1_RX 39 -#else -#define U300_DMA_GENERAL_PURPOSE_9 38 -#define U300_DMA_GENERAL_PURPOSE_10 39 -#endif -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_DEVICE_CHANNELS 32 -#else -#define U300_DMA_DEVICE_CHANNELS 30 -#endif #define U300_DMA_CHANNELS 40 diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index cb04bd6ab3e..0d4620ed853 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-u300/i2c.c * - * Copyright (C) 2009 ST-Ericsson AB + * Copyright (C) 2009-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * * Register board i2c devices @@ -261,7 +261,6 @@ static struct i2c_board_info __initdata bus0_i2c_board_info[] = { }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { -#ifdef CONFIG_MACH_U300_BS335 { .type = "fwcam", .addr = 0x10, @@ -270,9 +269,6 @@ static struct i2c_board_info __initdata bus1_i2c_board_info[] = { .type = "fwcam", .addr = 0x5d, }, -#else - { }, -#endif }; void __init u300_i2c_register_board_devices(void) diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h deleted file mode 100644 index 92e3cc872c6..00000000000 --- a/arch/arm/mach-u300/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h deleted file mode 100644 index e81400c1753..00000000000 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007-2011 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_U300_H -#define __MACH_U300_GPIO_U300_H - -/** - * enum u300_gpio_variant - the type of U300 GPIO employed - */ -enum u300_gpio_variant { - U300_GPIO_COH901335, - U300_GPIO_COH901571_3_BS335, - U300_GPIO_COH901571_3_BS365, -}; - -/** - * struct u300_gpio_platform - U300 GPIO platform data - * @variant: IP block variant - * @ports: number of GPIO block ports - * @gpio_base: first GPIO number for this block (use a free range) - * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) - * @pinctrl_device: pin control device to spawn as child - */ -struct u300_gpio_platform { - enum u300_gpio_variant variant; - u8 ports; - int gpio_base; - int gpio_irq_base; - struct platform_device *pinctrl_device; -}; - -#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ec09c1e07b1..e27425a63fa 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/irqs.h * * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * IRQ channel definitions for the U300 platforms. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,10 +31,6 @@ #define IRQ_U300_XGAM_GAMCON 14 #define IRQ_U300_XGAM_CDI 15 #define IRQ_U300_XGAM_CDICON 16 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -/* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 17 -#endif #define IRQ_U300_XGAM_PDI 18 #define IRQ_U300_XGAM_PDICON 19 #define IRQ_U300_XGAM_GAMEACC 20 @@ -55,8 +51,6 @@ #define IRQ_U300_GPIO_PORT1 34 #define IRQ_U300_GPIO_PORT2 35 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ - defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ #define IRQ_U300_WDOG 36 #define IRQ_U300_EVHIST 37 @@ -68,15 +62,8 @@ #define IRQ_U300_RTC 43 #define IRQ_U300_NFIF 44 #define IRQ_U300_NFIF2 45 -#endif - -/* DB3150 and DB3200 have only 45 IRQs */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 46 -#endif /* The DB3350-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS335 #define IRQ_U300_ISP_F0 46 #define IRQ_U300_ISP_F1 47 #define IRQ_U300_ISP_F2 48 @@ -89,25 +76,6 @@ #define IRQ_U300_GPIO_PORT5 55 #define IRQ_U300_GPIO_PORT6 56 #define U300_VIC_IRQS_END 57 -#endif - -/* The DB3210-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 36 -#define IRQ_U300_GPIO_PORT4 37 -#define IRQ_U300_WDOG 38 -#define IRQ_U300_EVHIST 39 -#define IRQ_U300_MSPRO 40 -#define IRQ_U300_MMCSD_MCIINTR0 41 -#define IRQ_U300_MMCSD_MCIINTR1 42 -#define IRQ_U300_I2C0 43 -#define IRQ_U300_I2C1 44 -#define IRQ_U300_RTC 45 -#define IRQ_U300_NFIF 46 -#define IRQ_U300_NFIF2 47 -#define IRQ_U300_SYSCON_PLL_LOCK 48 -#define U300_VIC_IRQS_END 49 -#endif /* Maximum 8*7 GPIO lines */ #ifdef CONFIG_PINCTRL_COH901 @@ -117,6 +85,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h deleted file mode 100644 index 096333f32fc..00000000000 --- a/arch/arm/mach-u300/include/mach/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/platform.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic platform init and mapping functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __ASSEMBLY__ - -void u300_map_io(void); -void u300_init_irq(void); -void u300_init_devices(void); -void u300_restart(char, const char *); -extern struct sys_timer u300_timer; - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 6e84f07a7c6..10bdd0be977 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/syscon.h * * - * Copyright (C) 2008 ST-Ericsson AB + * Copyright (C) 2008-2012 ST-Ericsson AB * * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ @@ -36,9 +36,7 @@ #define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) /* Reset lines for SLOW devices 16bit (R/W) */ #define U300_SYSCON_RSR (0x0014) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#endif #define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) #define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) #define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) @@ -50,9 +48,7 @@ #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) /* Reset lines for FAST devices 16bit (R/W) */ #define U300_SYSCON_RFR (0x0018) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#endif #define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) #define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) @@ -62,10 +58,8 @@ #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) /* Reset lines for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_RRR (0x001c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) #define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#endif #define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) #define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) #define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) @@ -79,9 +73,7 @@ #define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) /* Clock enable for SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CESR (0x0020) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#endif #define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) #define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) #define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) @@ -92,24 +84,20 @@ #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) /* Clock enable for FAST peripherals 16bit (R/W) */ #define U300_SYSCON_CEFR (0x0024) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#endif #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) #define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) #define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) /* Clock enable for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CERR (0x0028) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) #define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#endif #define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) #define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) @@ -124,9 +112,7 @@ #define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) /* Single block clock enable 16bit (-/W) */ #define U300_SYSCON_SBCER (0x002c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#endif #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) #define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) #define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) @@ -135,9 +121,7 @@ #define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) #define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#endif #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) #define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) @@ -147,10 +131,8 @@ #define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) #define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) #define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#endif #define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) #define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) @@ -168,9 +150,7 @@ /* Same values as above for SBCER */ /* Clock force SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CFSR (0x003c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#endif #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) @@ -184,10 +164,8 @@ /* Values not defined. Define if you want to use them. */ /* Clock force the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CFRR (0x44) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#endif #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 65f87c52389..1e49d901f2c 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -28,7 +28,6 @@ #define PLAT_NAND_CLE (1 << 16) #define PLAT_NAND_ALE (1 << 17) - /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 @@ -46,11 +45,7 @@ #define U300_BOOTROM_VIRT_BASE 0xffff0000 /* SEMI config base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_SEMI_CONFIG_BASE 0x2FFE0000 -#else -#define U300_SEMI_CONFIG_BASE 0x30000000 -#endif /* * AHB peripherals @@ -99,10 +94,8 @@ /* SPI controller */ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) -#ifdef CONFIG_MACH_U300_BS335 /* Fast UART1 on U335 only */ #define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -#endif /* * SLOW peripherals @@ -151,10 +144,8 @@ * REST peripherals */ -/* ISP (image signal processor) is only available in U335 */ -#ifdef CONFIG_MACH_U300_BS335 +/* ISP (image signal processor) */ #define U300_ISP_BASE (0xA0008000) -#endif /* DMA Controller base */ #define U300_DMAC_BASE (0xC0020000) @@ -166,17 +157,9 @@ #define U300_APEX_BASE (0xc0030000) /* Video Encoder Base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_VIDEOENC_BASE (0xc0080000) -#else -#define U300_VIDEOENC_BASE (0xc0040000) -#endif /* XGAM Base */ #define U300_XGAM_BASE (0xd0000000) -/* - * Virtual accessor macros for static devices - */ - #endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index a1affacfa59..02e6659286d 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -12,7 +12,7 @@ #include <linux/amba/pl022.h> #include <linux/err.h> #include <mach/coh901318.h> -#include <mach/dma_channels.h> +#include "dma_channels.h" /* * The following is for the actual devices on the SSP/SPI bus diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 56ac06d38ec..1da10e20e99 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -17,14 +17,17 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> /* Generic stuff */ #include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/mach/irq.h> + +#include "timer.h" /* * APP side special timer registers diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h new file mode 100644 index 00000000000..b5e9791762e --- /dev/null +++ b/arch/arm/mach-u300/timer.h @@ -0,0 +1 @@ +extern struct sys_timer u300_timer; diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h index 847dc25300c..83f50772e16 100644 --- a/arch/arm/mach-u300/u300-gpio.h +++ b/arch/arm/mach-u300/u300-gpio.h @@ -1,50 +1,11 @@ /* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. + * Individual pin assignments for the B335/S335. * Notice that the actual usage of these pins depends on the * PAD MUX settings, that is why the same number can potentially * appear several times. In the reference design each pin is only * used for one purpose. These were determined by inspecting the * S365 schematic. */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) #define U300_GPIO_PIN_UART_RX 0 #define U300_GPIO_PIN_UART_TX 1 #define U300_GPIO_PIN_UART_CTS 2 @@ -90,8 +51,6 @@ #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ -#ifdef CONFIG_MACH_U300_BS335 - #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ @@ -109,6 +68,3 @@ #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c deleted file mode 100644 index f30c69d91d9..00000000000 --- a/arch/arm/mach-u300/u300.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * arch/arm/mach-u300/u300.c - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform machine definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/memblock.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/hardware/vic.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/memory.h> - -static void __init u300_init_machine(void) -{ - u300_init_devices(); -} - -#ifdef CONFIG_MACH_U300_BS2X -#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS330 -#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS365 -#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" -#endif - -MACHINE_START(U300, MACH_U300_STRING) - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = 0x100, - .map_io = u300_map_io, - .init_irq = u300_init_irq, - .handle_irq = vic_handle_irq, - .timer = &u300_timer, - .init_machine = u300_init_machine, - .restart = u300_restart, -MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a534d8880de..1d2e3c6f8b5 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif -#define PRCC_K_SOFTRST_SET 0x18 -#define PRCC_K_SOFTRST_CLEAR 0x1C -static void ux500_uart0_reset(void) -{ - void __iomem *prcc_rst_set, *prcc_rst_clr; - - prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_SET); - prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + - PRCC_K_SOFTRST_CLEAR); - - /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ - writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); - udelay(1); - - /* Release soft reset PRCC_K_SOFTRST_SET */ - writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); - udelay(1); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index db3c52d56ca..3ee761d3a86 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -19,7 +19,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <asm/mach/map.h> -#include <asm/pmu.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -122,7 +121,7 @@ struct arm_pmu_platdata db8500_pmu_platdata = { static struct platform_device db8500_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(db8500_pmu_resources), .resource = db8500_pmu_resources, .dev.platform_data = &db8500_pmu_platdata, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cd8ea3588f9..ca7902c6ed1 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,11 +169,6 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, { - .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = IO_SPACE_LIMIT, - .type = MT_DEVICE }, #endif }; diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 408e58da46c..3e5d425e2a9 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,7 +29,6 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul -#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE /* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h deleted file mode 100644 index 0406513be7d..00000000000 --- a/arch/arm/mach-versatile/include/mach/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define PCIO_BASE 0xeb000000ul - -#define __io(a) ((a) + PCIO_BASE) - -#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index e95bf84cc83..2f84f4094f1 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,13 +169,6 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; -static struct resource io_port = { - .name = "PCI", - .start = 0, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, @@ -207,12 +200,6 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } - ret = request_resource(&ioport_resource, &io_port); - if (ret) { - printk(KERN_ERR "PCI: unable to allocate I/O " - "port region (%d)\n", ret); - goto out; - } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -227,11 +214,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) } /* - * the IO resource for this bus * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -260,9 +245,11 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) goto out; } + ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0); + if (ret) + goto out; + if (nr == 0) { - sys->mem_offset = 0; - sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); @@ -319,7 +306,6 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) void __init pci_versatile_preinit(void) { - pcibios_min_io = 0x44000000; pcibios_min_mem = 0x50000000; __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 61c492403b0..e4073a60a86 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -13,7 +13,6 @@ #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> -#include <asm/pmu.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> @@ -144,7 +143,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 566750fa57d..9d869f93a3d 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -36,6 +36,7 @@ #include <asm/system_info.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "mm.h" int ioremap_page(unsigned long virt, unsigned long phys, @@ -383,3 +384,16 @@ void __arm_iounmap(volatile void __iomem *io_addr) arch_iounmap(io_addr); } EXPORT_SYMBOL(__arm_iounmap); + +#ifdef CONFIG_PCI +int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) +{ + BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); + + return ioremap_page_range(PCI_IO_VIRT_BASE + offset, + PCI_IO_VIRT_BASE + offset + SZ_64K, + phys_addr, + __pgprot(get_mem_type(MT_DEVICE)->prot_pte)); +} +EXPORT_SYMBOL_GPL(pci_ioremap_io); +#endif diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index c2fa21d0103..18144e6a311 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "mm.h" @@ -216,7 +217,7 @@ static struct mem_type mem_types[] = { .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB, .domain = DOMAIN_IO, - }, + }, [MT_DEVICE_WC] = { /* ioremap_wc */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC, .prot_l1 = PMD_TYPE_TABLE, @@ -777,14 +778,27 @@ void __init iotable_init(struct map_desc *io_desc, int nr) create_mapping(md); vm->addr = (void *)(md->virtual & PAGE_MASK); vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); - vm->phys_addr = __pfn_to_phys(md->pfn); - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->phys_addr = __pfn_to_phys(md->pfn); + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; vm->flags |= VM_ARM_MTYPE(md->type); vm->caller = iotable_init; vm_area_add_early(vm++); } } +void __init vm_reserve_area_early(unsigned long addr, unsigned long size, + void *caller) +{ + struct vm_struct *vm; + + vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm->addr = (void *)addr; + vm->size = size; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; + vm->caller = caller; + vm_area_add_early(vm); +} + #ifndef CONFIG_ARM_LPAE /* @@ -802,14 +816,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr) static void __init pmd_empty_section_gap(unsigned long addr) { - struct vm_struct *vm; - - vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); - vm->addr = (void *)addr; - vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; - vm->caller = pmd_empty_section_gap; - vm_area_add_early(vm); + vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap); } static void __init fill_pmd_gaps(void) @@ -858,6 +865,28 @@ static void __init fill_pmd_gaps(void) #define fill_pmd_gaps() do { } while (0) #endif +#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H) +static void __init pci_reserve_io(void) +{ + struct vm_struct *vm; + unsigned long addr; + + /* we're still single threaded hence no lock needed here */ + for (vm = vmlist; vm; vm = vm->next) { + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + addr = (unsigned long)vm->addr; + addr &= ~(SZ_2M - 1); + if (addr == PCI_IO_VIRT_BASE) + return; + + } + vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io); +} +#else +#define pci_reserve_io() do { } while (0) +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); @@ -1141,6 +1170,9 @@ static void __init devicemaps_init(struct machine_desc *mdesc) mdesc->map_io(); fill_pmd_gaps(); + /* Reserve fixed i/o space in VMALLOC region */ + pci_reserve_io(); + /* * Finally flush the caches and tlb to ensure that we're in a * consistent state wrt the writebuffer. This also ensures that diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 8daae9b230e..362474b5c40 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -192,30 +192,24 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr != 0) return 0; - res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - res[0].start = IOP3XX_PCI_LOWER_IO_PA; - res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; - res[0].name = "IOP3XX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - request_resource(&ioport_resource, &res[0]); - - res[1].start = IOP3XX_PCI_LOWER_MEM_PA; - res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; - res[1].name = "IOP3XX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - request_resource(&iomem_resource, &res[1]); + res->start = IOP3XX_PCI_LOWER_MEM_PA; + res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; + res->name = "IOP3XX PCI Memory Space"; + res->flags = IORESOURCE_MEM; + request_resource(&iomem_resource, res); /* * Use whatever translation is already setup. */ sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; - sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); + + pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA); return 1; } @@ -367,7 +361,6 @@ void __init iop3xx_pci_preinit_cond(void) void __init iop3xx_pci_preinit(void) { - pcibios_min_io = 0; pcibios_min_mem = 0; iop3xx_atu_disable(); diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c index a2024b8685a..ad9f9744a82 100644 --- a/arch/arm/plat-iop/pmu.c +++ b/arch/arm/plat-iop/pmu.c @@ -9,7 +9,6 @@ */ #include <linux/platform_device.h> -#include <asm/pmu.h> #include <mach/irqs.h> static struct resource pmu_resource = { @@ -26,7 +25,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pmu_resource, .num_resources = 1, }; diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index bade586fed0..5b217f460f1 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -25,11 +25,6 @@ static struct map_desc iop3xx_std_desc[] __initdata = { .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, .type = MT_UNCACHED, - }, { /* PCI IO space */ - .virtual = IOP3XX_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), - .length = IOP3XX_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 6ac72003115..149237e2485 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o +obj-y := time.o devices.o cpu.o system.o irq-common.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c deleted file mode 100644 index 5079787273d..00000000000 --- a/arch/arm/plat-mxc/clock.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Based on arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -/* #define DEBUG */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/proc_fs.h> -#include <linux/semaphore.h> -#include <linux/string.h> - -#include <mach/clock.h> -#include <mach/hardware.h> - -#ifndef CONFIG_COMMON_CLK -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -/*------------------------------------------------------------------------- - * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ - -static void __clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - WARN_ON(!clk->usecount); - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - __clk_disable(clk->parent); - __clk_disable(clk->secondary); - } -} - -static int __clk_enable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (clk->usecount++ == 0) { - __clk_enable(clk->parent); - __clk_enable(clk->secondary); - - if (clk->enable) - clk->enable(clk); - } - return 0; -} - -/* This function increments the reference count on the clock and enables the - * clock if not already enabled. The parent clock tree is recursively enabled - */ -int clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = __clk_enable(clk); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* This function decrements the reference count on the clock and disables - * the clock when reference count is 0. The parent clock tree is - * recursively disabled - */ -void clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - __clk_disable(clk); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_disable); - -/* Retrieve the *current* clock rate. If the clock itself - * does not provide a special calculation routine, ask - * its parent and so on, until one is able to return - * a valid clock rate - */ -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0UL; - - if (clk->get_rate) - return clk->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -/* Round the requested clock rate to the nearest supported - * rate that is less than or equal to the requested rate. - * This is dependent on the clock's current parent. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk) || !clk->round_rate) - return 0; - - return clk->round_rate(clk, rate); -} -EXPORT_SYMBOL(clk_round_rate); - -/* Set the clock to the requested clock rate. The rate must - * match a supported rate exactly based on what clk_round_rate returns - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_rate(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* Set the clock's parent to another clock source */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - struct clk *old; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || - IS_ERR(parent) || clk->set_parent == NULL) - return ret; - - if (clk->usecount) - clk_enable(parent); - - mutex_lock(&clocks_mutex); - ret = clk->set_parent(clk, parent); - if (ret == 0) { - old = clk->parent; - clk->parent = parent; - } else { - old = parent; - } - mutex_unlock(&clocks_mutex); - - if (clk->usecount) - clk_disable(old); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -/* Retrieve the clock's parent clock source */ -struct clk *clk_get_parent(struct clk *clk) -{ - struct clk *ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -#else - -/* - * Lock to protect the clock module (ccm) registers. Used - * on all i.MXs - */ -DEFINE_SPINLOCK(imx_ccm_lock); - -#endif /* CONFIG_COMMON_CLK */ - -/* - * Get the resulting clock rate from a PLL register value and the input - * frequency. PLLs with this register layout can at least be found on - * MX1, MX21, MX27 and MX31 - * - * mfi + mfn / (mfd + 1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) -{ - long long ll; - int mfn_abs; - unsigned int mfi, mfn, mfd, pd; - - mfi = (reg_val >> 10) & 0xf; - mfn = reg_val & 0x3ff; - mfd = (reg_val >> 16) & 0x3ff; - pd = (reg_val >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - mfn_abs = mfn; - - /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit - * 2's complements number - */ - if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) - mfn_abs = 0x400 - mfn; - - freq *= 2; - freq /= pd + 1; - - ll = (unsigned long long)freq * mfn_abs; - - do_div(ll, mfd + 1); - - if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) - ll = -ll; - - ll = (freq * mfi) + ll; - - return ll; -} diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 73db34bf588..b5b6f808313 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -23,7 +23,6 @@ #include <linux/err.h> #include <linux/slab.h> #include <mach/hardware.h> -#include <mach/clock.h> #define CLK32_FREQ 32768 #define NANOSECOND (1000 * 1000 * 1000) diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 2020d84956c..d390f00bd29 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -87,7 +87,7 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { #ifdef CONFIG_SOC_IMX35 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { #define imx35_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K) imx35_imx_uart_data_entry(0, 1), imx35_imx_uart_data_entry(1, 2), imx35_imx_uart_data_entry(2, 3), diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h deleted file mode 100644 index bd940c795cb..00000000000 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_CLOCK_H__ -#define __ASM_ARCH_MXC_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include <linux/list.h> - -#ifndef CONFIG_COMMON_CLK -struct module; - -struct clk { - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - void __iomem *enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); -#endif /* CONFIG_COMMON_CLK */ - -extern spinlock_t imx_ccm_lock; - -unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 3c080a32dbf..7ded6f1f74b 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,7 +23,6 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ -#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -31,7 +30,6 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) -#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 1996c3e3b8f..3da78cfc5a9 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,7 +21,6 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/delay.h> -#include <linux/module.h> #include <mach/hardware.h> #include <mach/common.h> @@ -29,9 +28,6 @@ #include <asm/proc-fns.h> #include <asm/mach-types.h> -void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; -EXPORT_SYMBOL_GPL(imx_ioremap); - static void __iomem *wdog_base; /* diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index dd36eba9506..d15a4a6d614 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select SPARSE_IRQ select OMAP_DM_TIMER select USE_OF select PROC_DEVICETREE if PROC_FS diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 961bf859bc0..dacaee009a4 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,8 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - fb.o counter_32k.o +obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 89a3723b353..111315a6935 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -17,52 +17,12 @@ #include <linux/dma-mapping.h> #include <plat/common.h> -#include <plat/board.h> #include <plat/vram.h> -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> #include <plat/dma.h> #include <plat/omap-secure.h> - -#define NO_LENGTH_CHECK 0xffffffff - -struct omap_board_config_kernel *omap_board_config __initdata; -int omap_board_config_size; - -static const void *__init get_config(u16 tag, size_t len, - int skip, size_t *len_out) -{ - struct omap_board_config_kernel *kinfo = NULL; - int i; - - /* Try to find the config from the board-specific structures - * in the kernel. */ - for (i = 0; i < omap_board_config_size; i++) { - if (omap_board_config[i].tag == tag) { - if (skip == 0) { - kinfo = &omap_board_config[i]; - break; - } else { - skip--; - } - } - } - if (kinfo == NULL) - return NULL; - return kinfo->data; -} - -const void *__init __omap_get_config(u16 tag, size_t len, int nr) -{ - return get_config(tag, len, nr, NULL); -} - -const void *__init omap_get_var_config(u16 tag, size_t *len) -{ - return get_config(tag, NO_LENGTH_CHECK, 0, len); -} - void __init omap_reserve(void) { omap_vram_reserve_sdram_memblock(); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index dbf1e03029a..2e826f1faf7 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,10 +22,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/hardware.h> #include <plat/common.h> -#include <plat/board.h> - #include <plat/clock.h> /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index caa1f7b6cc2..c7a4c0902b3 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -17,9 +17,6 @@ #include <mach/hardware.h> -#include <plat/board.h> - - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. */ diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 39407cbe34c..195aaae6587 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c deleted file mode 100644 index 1cba9273d2c..00000000000 --- a/arch/arm/plat-omap/devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/devices.c - * - * Common platform device setup/initialization for OMAP1 and OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/gpio.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/memblock.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/memblock.h> - -#include <plat/tc.h> -#include <plat/board.h> -#include <plat/mmc.h> -#include <plat/menelaus.h> -#include <plat/omap44xx.h> - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - -/* - * This gets called after board-specific INIT_MACHINE, and initializes most - * on-chip peripherals accessible on this board (except for few like USB): - * - * (a) Does any "standard config" pin muxing needed. Board-specific - * code will have muxed GPIO pins and done "nonstandard" setup; - * that code could live in the boot loader. - * (b) Populating board-specific platform_data with the data drivers - * rely on to handle wiring variations. - * (c) Creating platform devices as meaningful on this board and - * with this kernel configuration. - * - * Claiming GPIOs, and setting their direction and initial values, is the - * responsibility of the device drivers. So is responding to probe(). - * - * Board-specific knowledge like creating devices or pin setup is to be - * kept out of drivers as much as possible. In particular, pin setup - * may be handled by the boot loader, and drivers should expect it will - * normally have been done by the time they're probed. - */ -static int __init omap_init_devices(void) -{ - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_rng(); - return 0; -} -arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7fe626761e5..c76ed8bff83 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,8 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <mach/hardware.h> +#include <plat/cpu.h> #include <plat/dma.h> - #include <plat/tc.h> /* @@ -969,8 +968,7 @@ void omap_stop_dma(int lch) l = p->dma_read(CCR, lch); } if (i >= 100) - printk(KERN_ERR "DMA drain did not complete on " - "lch %d\n", lch); + pr_err("DMA drain did not complete on lch %d\n", lch); /* Restore OCP_SYSCONFIG */ p->dma_write(sys_cf, OCP_SYSCONFIG, lch); } else { @@ -1154,8 +1152,7 @@ void omap_dma_link_lch(int lch_head, int lch_queue) if ((dma_chan[lch_head].dev_id == -1) || (dma_chan[lch_queue].dev_id == -1)) { - printk(KERN_ERR "omap_dma: trying to link " - "non requested channels\n"); + pr_err("omap_dma: trying to link non requested channels\n"); dump_stack(); } @@ -1181,15 +1178,13 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue) if (dma_chan[lch_head].next_lch != lch_queue || dma_chan[lch_head].next_lch == -1) { - printk(KERN_ERR "omap_dma: trying to unlink " - "non linked channels\n"); + pr_err("omap_dma: trying to unlink non linked channels\n"); dump_stack(); } if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) { - printk(KERN_ERR "omap_dma: You need to stop the DMA channels " - "before unlinking\n"); + pr_err("omap_dma: You need to stop the DMA channels before unlinking\n"); dump_stack(); } @@ -1831,16 +1826,15 @@ static int omap1_dma_handle_ch(int ch) if ((csr & 0x3f) == 0) return 0; if (unlikely(dma_chan[ch].dev_id == -1)) { - printk(KERN_WARNING "Spurious interrupt from DMA channel " - "%d (CSR %04x)\n", ch, csr); + pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n", + ch, csr); return 0; } if (unlikely(csr & OMAP1_DMA_TOUT_IRQ)) - printk(KERN_WARNING "DMA timeout with device %d\n", - dma_chan[ch].dev_id); + pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id); if (unlikely(csr & OMAP_DMA_DROP_IRQ)) - printk(KERN_WARNING "DMA synchronization event drop occurred " - "with device %d\n", dma_chan[ch].dev_id); + pr_warn("DMA synchronization event drop occurred with device %d\n", + dma_chan[ch].dev_id); if (likely(csr & OMAP_DMA_BLOCK_IRQ)) dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; if (likely(dma_chan[ch].callback != NULL)) @@ -1880,21 +1874,19 @@ static int omap2_dma_handle_ch(int ch) if (!status) { if (printk_ratelimit()) - printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", - ch); + pr_warn("Spurious DMA IRQ for lch %d\n", ch); p->dma_write(1 << ch, IRQSTATUS_L0, ch); return 0; } if (unlikely(dma_chan[ch].dev_id == -1)) { if (printk_ratelimit()) - printk(KERN_WARNING "IRQ %04x for non-allocated DMA" - "channel %d\n", status, ch); + pr_warn("IRQ %04x for non-allocated DMA channel %d\n", + status, ch); return 0; } if (unlikely(status & OMAP_DMA_DROP_IRQ)) - printk(KERN_INFO - "DMA synchronization event drop occurred with device " - "%d\n", dma_chan[ch].dev_id); + pr_info("DMA synchronization event drop occurred with device %d\n", + dma_chan[ch].dev_id); if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) { printk(KERN_INFO "DMA transaction error with device %d\n", dma_chan[ch].dev_id); @@ -2014,8 +2006,9 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) p = pdev->dev.platform_data; if (!p) { - dev_err(&pdev->dev, "%s: System DMA initialized without" - "platform data\n", __func__); + dev_err(&pdev->dev, + "%s: System DMA initialized without platform data\n", + __func__); return -EINVAL; } @@ -2090,8 +2083,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } ret = setup_irq(dma_irq, &omap24xx_dma_irq); if (ret) { - dev_err(&pdev->dev, "set_up failed for IRQ %d" - "for DMA (error %d)\n", dma_irq, ret); + dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n", + dma_irq, ret); goto exit_dma_lch_fail; } } @@ -2099,8 +2092,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) /* reserve dma channels 0 and 1 in high security devices */ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) { - printk(KERN_INFO "Reserving DMA channels 0 and 1 for " - "HS ROM code\n"); + pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; } @@ -2108,8 +2100,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) return 0; exit_dma_irq_fail: - dev_err(&pdev->dev, "unable to request IRQ %d" - "for DMA (error %d)\n", dma_irq, ret); + dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n", + dma_irq, ret); for (irq_rel = 0; irq_rel < ch; irq_rel++) { dma_irq = platform_get_irq(pdev, irq_rel); free_irq(dma_irq, (void *)(irq_rel + 1)); diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index dd6f92c99e5..bcbb9d5dc29 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -33,8 +33,6 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <plat/board.h> - #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index db071bc71c4..6013831a043 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -32,13 +32,13 @@ #include <linux/clk.h> #include <mach/irqs.h> -#include <plat/mux.h> #include <plat/i2c.h> #include <plat/omap-pm.h> #include <plat/omap_device.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) static const char name[] = "omap_i2c"; @@ -105,7 +105,7 @@ static inline int omap1_i2c_add_bus(int bus_id) res = pdev->resource; res[0].start = OMAP1_I2C_BASE; res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = INT_I2C; + res[1].start = OMAP1_INT_I2C; pdata = &i2c_pdata[bus_id - 1]; /* all OMAP1 have IP version 1 register set */ diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h deleted file mode 100644 index e62f20a5c0a..00000000000 --- a/arch/arm/plat-omap/include/plat/board.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include <linux/types.h> - -#include <plat/gpio-switch.h> - -/* - * OMAP35x EVM revision - * Run time detection of EVM revision is done by reading Ethernet - * PHY ID - - * GEN_1 = 0x01150000 - * GEN_2 = 0x92200000 - */ -enum { - OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ - OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ -}; - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__init __omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *__init omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -/* OMAP3EVM revision */ -#if defined(CONFIG_MACH_OMAP3EVM) -u8 get_omap3_evm_rev(void); -#else -#define get_omap3_evm_rev() (-EINVAL) -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index bb5d08a70db..67da857783c 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -30,6 +30,8 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#ifndef __ASSEMBLY__ + #include <linux/bitops.h> #include <plat/multi.h> @@ -493,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index c5811d4409b..0a87b052f8f 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -31,6 +31,8 @@ /* Move omap4 specific defines to dma-44xx.h */ #include "dma-44xx.h" +#define INT_DMA_LCD 25 + /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 #define OMAP_DMA_MCSI1_TX 1 diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h deleted file mode 100644 index 5927709b190..00000000000 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __OMAP_DSP_H__ -#define __OMAP_DSP_H__ - -#include <linux/types.h> - -struct omap_dsp_platform_data { - void (*dsp_set_min_opp) (u8 opp_id); - u8 (*dsp_get_opp) (void); - void (*cpu_set_freq) (unsigned long f); - unsigned long (*cpu_get_freq) (void); - unsigned long mpu_speed[6]; - - /* functions to write and read PRCM registers */ - void (*dsp_prm_write)(u32, s16 , u16); - u32 (*dsp_prm_read)(s16 , u16); - u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16); - void (*dsp_cm_write)(u32, s16 , u16); - u32 (*dsp_cm_read)(s16 , u16); - u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); - - void (*set_bootaddr)(u32); - void (*set_bootmode)(u8); - - phys_addr_t phys_mempool_base; - phys_addr_t phys_mempool_size; -}; - -#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) -extern void omap_dsp_reserve_sdram_memblock(void); -#else -static inline void omap_dsp_reserve_sdram_memblock(void) { } -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h deleted file mode 100644 index 10da0e07c0c..00000000000 --- a/arch/arm/plat-omap/include/plat/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include <linux/types.h> - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h deleted file mode 100644 index 50fb7cc000e..00000000000 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <mach/irqs.h> - -#define OMAP1_MPUIO_BASE 0xfffb5000 - -/* - * These are the omap15xx/16xx offsets. The omap7xx offset are - * OMAP_MPUIO_ / 2 offsets below. - */ -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 - -#define OMAP34XX_NR_GPIOS 6 - -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -/* - * omap2+ specific GPIO registers - */ -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -struct omap_gpio_dev_attr { - int bank_width; /* GPIO bank width */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ -}; - -struct omap_gpio_reg_offs { - u16 revision; - u16 direction; - u16 datain; - u16 dataout; - u16 set_dataout; - u16 clr_dataout; - u16 irqstatus; - u16 irqstatus2; - u16 irqstatus_raw0; - u16 irqstatus_raw1; - u16 irqenable; - u16 irqenable2; - u16 set_irqenable; - u16 clr_irqenable; - u16 debounce; - u16 debounce_en; - u16 ctrl; - u16 wkup_en; - u16 leveldetect0; - u16 leveldetect1; - u16 risingdetect; - u16 fallingdetect; - u16 irqctrl; - u16 edgectrl1; - u16 edgectrl2; - u16 pinctrl; - - bool irqenable_inv; -}; - -struct omap_gpio_platform_data { - int bank_type; - int bank_width; /* GPIO bank width */ - int bank_stride; /* Only needed for omap1 MPUIO */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ - bool loses_context; /* whether the bank would ever lose context */ - bool is_mpuio; /* whether the bank is of type MPUIO */ - u32 non_wakeup_gpios; - - struct omap_gpio_reg_offs *regs; - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); -}; - -extern void omap2_gpio_prepare_for_idle(int off_mode); -extern void omap2_gpio_resume_after_idle(void); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); -/*-------------------------------------------------------------------------*/ - -/* - * Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * - * The original OMAP-specific calls should eventually be removed. - */ - -#include <linux/errno.h> -#include <asm-generic/gpio.h> - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index f37764a3607..2e6e2597178 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -133,6 +133,25 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0; +}; + +extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); +extern int gpmc_get_client_irq(unsigned irq_config); + extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h deleted file mode 100644 index ddbde38e1e3..00000000000 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * - * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> - * and Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include <asm/sizes.h> -#ifndef __ASSEMBLER__ -#include <asm/types.h> -#include <plat/cpu.h> -#endif -#include <plat/serial.h> - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include <plat/omap7xx.h> -#include <plat/omap1510.h> -#include <plat/omap16xx.h> -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> -#include <plat/ti81xx.h> -#include <plat/am33xx.h> -#include <plat/omap54xx.h> - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h deleted file mode 100644 index 518322c8011..00000000000 --- a/arch/arm/plat-omap/include/plat/irqs-44xx.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * OMAP4 Interrupt lines definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H - -/* OMAP44XX IRQs numbers definitions */ -#define OMAP44XX_IRQ_LOCALTIMER 29 -#define OMAP44XX_IRQ_LOCALWDT 30 - -#define OMAP44XX_IRQ_GIC_START 32 - -#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START) - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h deleted file mode 100644 index 37bbbbb981b..00000000000 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* All OMAP4 specific defines are moved to irqs-44xx.h */ -#include "irqs-44xx.h" - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_SHA1MD5 51 -#define INT_24XX_MCBSP4_IRQ_TX 54 -#define INT_24XX_MCBSP4_IRQ_RX 55 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_HDQ_IRQ 58 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_SPI1_IRQ 65 -#define INT_24XX_SPI2_IRQ 66 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MCBSP5_IRQ_TX 81 -#define INT_24XX_MCBSP5_IRQ_RX 82 -#define INT_24XX_MMC_IRQ 83 -#define INT_24XX_MMC2_IRQ 86 -#define INT_24XX_MCBSP3_IRQ_TX 89 -#define INT_24XX_MCBSP3_IRQ_RX 90 -#define INT_24XX_SPI3_IRQ 91 - -#define INT_243X_MCBSP2_IRQ 16 -#define INT_243X_MCBSP3_IRQ 17 -#define INT_243X_MCBSP4_IRQ 18 -#define INT_243X_MCBSP5_IRQ 19 -#define INT_243X_MCBSP1_IRQ 64 -#define INT_243X_HS_USB_MC 92 -#define INT_243X_HS_USB_DMA 93 -#define INT_243X_CARKIT_IRQ 94 - -#define INT_34XX_BENCH_MPU_EMUL 3 -#define INT_34XX_ST_MCBSP2_IRQ 4 -#define INT_34XX_ST_MCBSP3_IRQ 5 -#define INT_34XX_SSM_ABORT_IRQ 6 -#define INT_34XX_SYS_NIRQ 7 -#define INT_34XX_D2D_FW_IRQ 8 -#define INT_34XX_L3_DBG_IRQ 9 -#define INT_34XX_L3_APP_IRQ 10 -#define INT_34XX_PRCM_MPU_IRQ 11 -#define INT_34XX_MCBSP1_IRQ 16 -#define INT_34XX_MCBSP2_IRQ 17 -#define INT_34XX_GPMC_IRQ 20 -#define INT_34XX_MCBSP3_IRQ 22 -#define INT_34XX_MCBSP4_IRQ 23 -#define INT_34XX_CAM_IRQ 24 -#define INT_34XX_MCBSP5_IRQ 27 -#define INT_34XX_GPIO_BANK1 29 -#define INT_34XX_GPIO_BANK2 30 -#define INT_34XX_GPIO_BANK3 31 -#define INT_34XX_GPIO_BANK4 32 -#define INT_34XX_GPIO_BANK5 33 -#define INT_34XX_GPIO_BANK6 34 -#define INT_34XX_USIM_IRQ 35 -#define INT_34XX_WDT3_IRQ 36 -#define INT_34XX_SPI4_IRQ 48 -#define INT_34XX_SHA1MD52_IRQ 49 -#define INT_34XX_FPKA_READY_IRQ 50 -#define INT_34XX_SHA1MD51_IRQ 51 -#define INT_34XX_RNG_IRQ 52 -#define INT_34XX_I2C3_IRQ 61 -#define INT_34XX_FPKA_ERROR_IRQ 64 -#define INT_34XX_PBIAS_IRQ 75 -#define INT_34XX_OHCI_IRQ 76 -#define INT_34XX_EHCI_IRQ 77 -#define INT_34XX_TLL_IRQ 78 -#define INT_34XX_PARTHASH_IRQ 79 -#define INT_34XX_MMC3_IRQ 94 -#define INT_34XX_GPT12_IRQ 95 - -#define INT_36XX_UART4_IRQ 80 - -#define INT_35XX_HECC0_IRQ 24 -#define INT_35XX_HECC1_IRQ 28 -#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 -#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68 -#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 -#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 -#define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4_IRQ 84 -#define INT_35XX_CCDC_VD0_IRQ 88 -#define INT_35XX_CCDC_VD1_IRQ 92 -#define INT_35XX_CCDC_VD2_IRQ 93 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_GPIO_TWL4030 -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL6030_BASE_NR_IRQS 20 -#else -#define TWL6030_BASE_NR_IRQS 0 -#endif -#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) - -#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END -#ifdef CONFIG_TWL6040_CODEC -#define TWL6040_CODEC_NR_IRQS 6 -#else -#define TWL6040_CODEC_NR_IRQS 0 -#endif -#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) -#define TWL_IRQ_END TWL4030_GPIO_IRQ_END -#else -#define TWL_IRQ_END TWL6040_CODEC_IRQ_END -#endif - -/* GPMC related */ -#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 8 -#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) - -/* PRCM IRQ handler */ -#ifdef CONFIG_ARCH_OMAP2PLUS -#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) -#define OMAP_PRCM_NR_IRQS 64 -#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) -#else -#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END -#endif - -#define NR_IRQS OMAP_PRCM_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -#include <mach/hardware.h> - -#ifdef CONFIG_FIQ -#define FIQ_START 1024 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h deleted file mode 100644 index a6b21eddb21..00000000000 --- a/arch/arm/plat-omap/include/plat/keypad.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/keypad.h - * - * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H - -#ifndef CONFIG_ARCH_OMAP1 -#warning Please update the board to use matrix-keypad driver -#define omap_readw(reg) 0 -#define omap_writew(val, reg) do {} while (0) -#endif -#include <linux/input/matrix_keypad.h> - -struct omap_kp_platform_data { - int rows; - int cols; - const struct matrix_keymap_data *keymap_data; - bool rep; - unsigned long delay; - bool dbounce; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; -}; - -/* Group (0..3) -- when multiple keys are pressed, only the - * keys pressed in the same group are considered as pressed. This is - * in order to workaround certain crappy HW designs that produce ghost - * keypresses. Two free bits, not used by neither row/col nor keynum, - * must be available for use as group bits. The below GROUP_SHIFT - * macro definition is based on some prior knowledge of the - * matrix_keypad defined KEY() macro internals. - */ -#define GROUP_SHIFT 14 -#define GROUP_0 (0 << GROUP_SHIFT) -#define GROUP_1 (1 << GROUP_SHIFT) -#define GROUP_2 (2 << GROUP_SHIFT) -#define GROUP_3 (3 << GROUP_SHIFT) -#define GROUP_MASK GROUP_3 -#if KEY_MAX & GROUP_MASK -#error Group bits in conflict with keynum bits -#endif - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h deleted file mode 100644 index 8e52c657228..00000000000 --- a/arch/arm/plat-omap/include/plat/lcd_mipid.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __LCD_MIPID_H -#define __LCD_MIPID_H - -enum mipid_test_num { - MIPID_TEST_RGB_LINES, -}; - -enum mipid_test_result { - MIPID_TEST_SUCCESS, - MIPID_TEST_INVALID, - MIPID_TEST_FAILED, -}; - -#ifdef __KERNEL__ - -struct mipid_platform_data { - int nreset_gpio; - int data_lines; - - void (*shutdown)(struct mipid_platform_data *pdata); - void (*set_bklight_level)(struct mipid_platform_data *pdata, - int level); - int (*get_bklight_level)(struct mipid_platform_data *pdata); - int (*get_bklight_max)(struct mipid_platform_data *pdata); -}; - -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h deleted file mode 100644 index 18814127809..00000000000 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mcbsp.h - * - * Defines for Multi-Channel Buffered Serial Port - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H - -#include <linux/spinlock.h> -#include <linux/clk.h> - -#define MCBSP_CONFIG_TYPE2 0x2 -#define MCBSP_CONFIG_TYPE3 0x3 -#define MCBSP_CONFIG_TYPE4 0x4 - -/* Platform specific configuration */ -struct omap_mcbsp_ops { - void (*request)(unsigned int); - void (*free)(unsigned int); -}; - -struct omap_mcbsp_platform_data { - struct omap_mcbsp_ops *ops; - u16 buffer_size; - u8 reg_size; - u8 reg_step; - - /* McBSP platform and instance specific features */ - bool has_wakeup; /* Wakeup capability */ - bool has_ccr; /* Transceiver has configuration control registers */ - int (*enable_st_clock)(unsigned int, bool); - int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); - int (*mux_signal)(struct device *dev, const char *signal, const char *src); -}; - -/** - * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod - * @sidetone: name of the sidetone device - */ -struct omap_mcbsp_dev_attr { - const char *sidetone; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h deleted file mode 100644 index a357eb26bd2..00000000000 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _OMAP2_MCSPI_H -#define _OMAP2_MCSPI_H - -#define OMAP2_MCSPI_REV 0 -#define OMAP3_MCSPI_REV 1 -#define OMAP4_MCSPI_REV 2 - -#define OMAP4_MCSPI_REG_OFFSET 0x100 - -struct omap2_mcspi_platform_config { - unsigned short num_cs; - unsigned int regs_offset; -}; - -struct omap2_mcspi_dev_attr { - unsigned short num_chipselect; -}; - -struct omap2_mcspi_device_config { - unsigned turbo_mode:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index eb3e4d55534..8b4e4f2da2f 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,6 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <plat/board.h> #include <plat/omap_hwmod.h> #define OMAP15XX_NR_MMC 1 diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h deleted file mode 100644 index 67fc5060183..00000000000 --- a/arch/arm/plat-omap/include/plat/nand.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/nand.h - * - * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <plat/gpmc.h> -#include <linux/mtd/partitions.h> - -enum nand_io { - NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ - NAND_OMAP_POLLED, /* polled mode, without prefetch */ - NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ - NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ -}; - -struct omap_nand_platform_data { - int cs; - struct mtd_partition *parts; - struct gpmc_timings *gpmc_t; - int nr_parts; - bool dev_ready; - int gpmc_irq; - enum nand_io xfer_type; - unsigned long phys_base; - int devsize; - enum omap_ecc ecc_opt; -}; - -/* minimum size for IO mapping */ -#define NAND_IO_SIZE 4 - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -extern int gpmc_nand_init(struct omap_nand_platform_data *d); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d) -{ - return 0; -} -#endif diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1a52725ffcf..b2eac60b690 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -18,11 +18,9 @@ #define __OMAP_SERIAL_H__ #include <linux/serial_core.h> -#include <linux/platform_device.h> +#include <linux/device.h> #include <linux/pm_qos.h> -#include <plat/mux.h> - #define DRIVER_NAME "omap_uart" /* @@ -42,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F @@ -69,11 +67,14 @@ struct omap_uart_port_info { unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct platform_device *); - void (*set_noidle)(struct platform_device *); - void (*enable_wakeup)(struct platform_device *, bool); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); }; struct uart_omap_dma { @@ -102,39 +103,4 @@ struct uart_omap_dma { unsigned int rx_timeout; }; -struct uart_omap_port { - struct uart_port port; - struct uart_omap_dma uart_dma; - struct platform_device *pdev; - - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char fcr; - unsigned char efr; - unsigned char dll; - unsigned char dlh; - unsigned char mdr1; - unsigned char scr; - - int use_dma; - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ - unsigned int lsr_break_flag; - unsigned char msr_saved_flags; - char name[20]; - unsigned long port_activity; - u32 context_loss_cnt; - u32 errata; - u8 wakeups_enabled; - - struct pm_qos_request pm_qos_request; - u32 latency; - u32 calc_latency; - struct work_struct qos_work; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h deleted file mode 100644 index 2858667d2e4..00000000000 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/onenand.h - * - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) - -struct onenand_freq_info { - u16 maf_id; - u16 dev_id; - u16 ver_id; -}; - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int *freq_ptr); - int (*get_freq)(const struct onenand_freq_info *freq_info, - bool *clk_dep); - int dma_channel; - u8 flags; - u8 regulator_can_sleep; - u8 skip_initial_unlocking; -}; - -#define ONENAND_MAX_PARTITIONS 8 - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); - -#else - -#define board_onenand_data NULL - -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h deleted file mode 100644 index 1eb4dc32697..00000000000 --- a/arch/arm/plat-omap/include/plat/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h deleted file mode 100644 index b10eac89e2e..00000000000 --- a/arch/arm/plat-omap/include/plat/remoteproc.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Remote Processor - omap-specific bits - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Copyright (C) 2011 Google, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _PLAT_REMOTEPROC_H -#define _PLAT_REMOTEPROC_H - -struct rproc_ops; -struct platform_device; - -/* - * struct omap_rproc_pdata - omap remoteproc's platform data - * @name: the remoteproc's name - * @oh_name: omap hwmod device - * @oh_name_opt: optional, secondary omap hwmod device - * @firmware: name of firmware file to load - * @mbox_name: name of omap mailbox device to use with this rproc - * @ops: start/stop rproc handlers - * @device_enable: omap-specific handler for enabling a device - * @device_shutdown: omap-specific handler for shutting down a device - */ -struct omap_rproc_pdata { - const char *name; - const char *oh_name; - const char *oh_name_opt; - const char *firmware; - const char *mbox_name; - const struct rproc_ops *ops; - int (*device_enable) (struct platform_device *pdev); - int (*device_shutdown) (struct platform_device *pdev); -}; - -#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) - -void __init omap_rproc_reserve_cma(void); - -#else - -void __init omap_rproc_reserve_cma(void) -{ -} - -#endif - -#endif /* _PLAT_REMOTEPROC_H */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 548a4c8d63d..bd20588c356 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -5,7 +5,6 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h deleted file mode 100644 index 5be4d5def42..00000000000 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * OMAP Voltage Management Routines - * - * Copyright (C) 2011, Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_VOLTAGE_H -#define __ARCH_ARM_OMAP_VOLTAGE_H - -/** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; -struct voltagedomain; - -struct voltagedomain *voltdm_lookup(const char *name); -int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); -unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); -struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt); -#endif diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c deleted file mode 100644 index cff8712122b..00000000000 --- a/arch/arm/plat-omap/mux.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * linux/arch/arm/plat-omap/mux.c - * - * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h - * - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm/system.h> - -#include <plat/cpu.h> -#include <plat/mux.h> - -#ifdef CONFIG_OMAP_MUX - -static struct omap_mux_cfg *mux_cfg; - -int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg) -{ - if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0 - || !arch_mux_cfg->cfg_reg) { - printk(KERN_ERR "Invalid pin table\n"); - return -EINVAL; - } - - mux_cfg = arch_mux_cfg; - - return 0; -} - -/* - * Sets the Omap MUX and PULL_DWN registers based on the table - */ -int __init_or_module omap_cfg_reg(const unsigned long index) -{ - struct pin_config *reg; - - if (!cpu_class_is_omap1()) { - printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", - index); - WARN_ON(1); - return -EINVAL; - } - - if (mux_cfg == NULL) { - printk(KERN_ERR "Pin mux table not initialized\n"); - return -ENODEV; - } - - if (index >= mux_cfg->size) { - printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", - index, mux_cfg->size); - dump_stack(); - return -ENODEV; - } - - reg = (struct pin_config *)&mux_cfg->pins[index]; - - if (!mux_cfg->cfg_reg) - return -ENODEV; - - return mux_cfg->cfg_reg(reg); -} -EXPORT_SYMBOL(omap_cfg_reg); -#else -#define omap_mux_init() do {} while(0) -#define omap_cfg_reg(x) do {} while(0) -#endif /* CONFIG_OMAP_MUX */ diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 5a97b4d98d4..9f6413324df 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -41,11 +41,11 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) }; if (t == -1) - pr_debug("OMAP PM: remove max MPU wakeup latency constraint: " - "dev %s\n", dev_name(dev)); + pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", + dev_name(dev)); else - pr_debug("OMAP PM: add max MPU wakeup latency constraint: " - "dev %s, t = %ld usec\n", dev_name(dev), t); + pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); /* * For current Linux, this needs to map the MPU to a @@ -70,11 +70,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) }; if (r == 0) - pr_debug("OMAP PM: remove min bus tput constraint: " - "dev %s for agent_id %d\n", dev_name(dev), agent_id); + pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", + dev_name(dev), agent_id); else - pr_debug("OMAP PM: add min bus tput constraint: " - "dev %s for agent_id %d: rate %ld KiB\n", + pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", dev_name(dev), agent_id, r); /* @@ -97,11 +96,11 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, }; if (t == -1) - pr_debug("OMAP PM: remove max device latency constraint: " - "dev %s\n", dev_name(dev)); + pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", + dev_name(dev)); else - pr_debug("OMAP PM: add max device latency constraint: " - "dev %s, t = %ld usec\n", dev_name(dev), t); + pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); /* * For current Linux, this needs to map the device to a @@ -127,11 +126,11 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t) }; if (t == -1) - pr_debug("OMAP PM: remove max DMA latency constraint: " - "dev %s\n", dev_name(dev)); + pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", + dev_name(dev)); else - pr_debug("OMAP PM: add max DMA latency constraint: " - "dev %s, t = %ld usec\n", dev_name(dev), t); + pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); /* * For current Linux PM QOS params, this code should scan the @@ -156,11 +155,11 @@ int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) } if (r == 0) - pr_debug("OMAP PM: remove min clk rate constraint: " - "dev %s\n", dev_name(dev)); + pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", + dev_name(dev)); else - pr_debug("OMAP PM: add min clk rate constraint: " - "dev %s, rate = %ld Hz\n", dev_name(dev), r); + pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", + dev_name(dev), r); /* * Code in a real implementation should keep track of these diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index c490240bb82..b59edb065c7 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,4 +1,3 @@ - /* * omap_device implementation * @@ -153,21 +152,19 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) act_lat = timespec_to_ns(&c); dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: activate: elapsed time " - "%llu nsec\n", od->pm_lat_level, act_lat); + "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n", + od->pm_lat_level, act_lat); if (act_lat > odpl->activate_lat) { odpl->activate_lat_worst = act_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->activate_lat = act_lat; dev_dbg(&od->pdev->dev, - "new worst case activate latency " - "%d: %llu\n", + "new worst case activate latency %d: %llu\n", od->pm_lat_level, act_lat); } else dev_warn(&od->pdev->dev, - "activate latency %d " - "higher than exptected. (%llu > %d)\n", + "activate latency %d higher than expected. (%llu > %d)\n", od->pm_lat_level, act_lat, odpl->activate_lat); } @@ -220,21 +217,19 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) deact_lat = timespec_to_ns(&c); dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: deactivate: elapsed time " - "%llu nsec\n", od->pm_lat_level, deact_lat); + "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n", + od->pm_lat_level, deact_lat); if (deact_lat > odpl->deactivate_lat) { odpl->deactivate_lat_worst = deact_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->deactivate_lat = deact_lat; dev_dbg(&od->pdev->dev, - "new worst case deactivate latency " - "%d: %llu\n", + "new worst case deactivate latency %d: %llu\n", od->pm_lat_level, deact_lat); } else dev_warn(&od->pdev->dev, - "deactivate latency %d " - "higher than exptected. (%llu > %d)\n", + "deactivate latency %d higher than expected. (%llu > %d)\n", od->pm_lat_level, deact_lat, odpl->deactivate_lat); } @@ -449,8 +444,8 @@ static int omap_device_count_resources(struct omap_device *od) for (i = 0; i < od->hwmods_cnt; i++) c += omap_hwmod_count_resources(od->hwmods[i]); - pr_debug("omap_device: %s: counted %d total resources across %d " - "hwmods\n", od->pdev->name, c, od->hwmods_cnt); + pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n", + od->pdev->name, c, od->hwmods_cnt); return c; } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 024f3b08db2..28acb383e7d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/sram.h> -#include <plat/board.h> #include <plat/cpu.h> #include "sram.h" diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index fc49f3dabd7..6ff45d53362 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -35,7 +35,6 @@ #include <media/s5p_hdmi.h> #include <asm/irq.h> -#include <asm/pmu.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -1132,7 +1131,7 @@ static struct resource s5p_pmu_resource[] = { static struct platform_device s5p_device_pmu = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(s5p_pmu_resource), .resource = s5p_pmu_resource, }; diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h index bab13920176..d1ecef0e38e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-fns.h +++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h @@ -1,98 +1 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h - * - * Copyright (c) 2003-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIO_FNS_H -#define __MACH_GPIO_FNS_H __FILE__ - -/* These functions are in the to-be-removed category and it is strongly - * encouraged not to use these in new code. They will be marked deprecated - * very soon. - * - * Most of the functionality can be either replaced by the gpiocfg calls - * for the s3c platform or by the generic GPIOlib API. - * - * As of 2.6.35-rc, these will be removed, with the few drivers using them - * either replaced or given a wrapper until the calls can be removed. -*/ - #include <plat/gpio-cfg.h> - -static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) -{ - /* 1:1 mapping between cfgpin and setcfg calls at the moment */ - s3c_gpio_cfgpin(pin, cfg); -} - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * This call should be replaced with s3c_gpio_setpull(). - * - * As a note, there is currently no distinction between pull-up and pull-down - * in the s3c24xx series devices with only an on/off configuration. - */ - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2997e56ce0d..7bc7948c543 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -158,7 +158,6 @@ edb9315a MACH_EDB9315A EDB9315A 772 stargate2 MACH_STARGATE2 STARGATE2 774 intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 -pnx4008 MACH_PNX4008 PNX4008 782 cpuat91 MACH_CPUAT91 CPUAT91 787 iq81340sc MACH_IQ81340SC IQ81340SC 799 iq81340mc MACH_IQ81340MC IQ81340MC 801 |