diff options
Diffstat (limited to 'arch/arm')
739 files changed, 21302 insertions, 13749 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c6187..7980873525b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -11,6 +11,7 @@ config ARM select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB @@ -38,6 +39,7 @@ config ARM select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IRQ_PROBE + select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP @@ -45,6 +47,9 @@ config ARM select GENERIC_SMP_IDLE_THREAD select KTIME_SCALAR select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -250,12 +255,31 @@ choice prompt "ARM system type" default ARCH_VERSATILE +config ARCH_SOCFPGA + bool "Altera SOCFPGA family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU + select SPARSE_IRQ + select USE_OF + help + This enables support for Altera SOCFPGA Cyclone V platform + config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS @@ -277,6 +301,7 @@ config ARCH_REALVIEW select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -295,6 +320,7 @@ config ARCH_VERSATILE select ARCH_WANT_OPTIONAL_GPIOLIB select NEED_MACH_IO_H if PCI select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 @@ -307,7 +333,7 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_TIMER_SP804 select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_PATA_PLATFORM @@ -315,6 +341,7 @@ config ARCH_VEXPRESS select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help This enables support for the ARM Ltd Versatile Express boards. @@ -349,6 +376,7 @@ config ARCH_HIGHBANK select ARM_TIMER_SP804 select CACHE_L2X0 select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU @@ -389,6 +417,7 @@ config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" select CPU_V7 select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP @@ -447,6 +476,8 @@ config ARCH_MXC select CLKSRC_MMIO select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF help Support for Freescale MXC/iMX-based family of processors @@ -533,6 +564,18 @@ config ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. +config ARCH_MVEBU + bool "Marvell SOCs with Device Tree support" + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select COMMON_CLK + help + Support for the Marvell SoC Family with device tree support + config ARCH_DOVE bool "Marvell Dove" select CPU_V7 @@ -567,6 +610,7 @@ config ARCH_LPC32XX select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select USE_OF + select HAVE_PWM help Support for the NXP LPC32XX family of processors @@ -647,6 +691,7 @@ config ARCH_TEGRA select MIGHT_HAVE_CACHE_L2X0 select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ + select USE_OF help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -658,6 +703,7 @@ config ARCH_PICOXCELL select ARM_VIC select CPU_V6K select DW_APB_TIMER + select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_TCM @@ -888,7 +934,7 @@ config ARCH_U300 select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help @@ -913,7 +959,7 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_CLOCKEVENTS select PINCTRL select MIGHT_HAVE_CACHE_L2X0 @@ -936,6 +982,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" + depends on MMU select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ @@ -964,7 +1011,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select HAVE_PWM help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. @@ -987,6 +1033,8 @@ endchoice # Kconfigs may be included either alphabetically (according to the # plat- suffix) or along side the corresponding mach-* source. # +source "arch/arm/mach-mvebu/Kconfig" + source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcmring/Kconfig" @@ -1021,8 +1069,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-lpc32xx/Kconfig" - source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" @@ -1581,6 +1627,7 @@ config ARCH_NR_GPIO default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 355 if ARCH_U8500 default 264 if MACH_H4700 + default 512 if SOC_OMAP5 default 0 help Maximum number of GPIOs in the system. @@ -1961,6 +2008,25 @@ config ARM_ATAG_DTB_COMPAT bootloaders, this option allows zImage to extract the information from the ATAG list and store it at run time into the appended DTB. +choice + prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + +config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader instead of + the device tree bootargs property. If the boot loader doesn't provide + any, the device tree bootargs property will be used. + +config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND + bool "Extend with bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + +endchoice + config CMDLINE string "Default kernel command string" default "" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 01a13414121..f15f82bf3a5 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -310,6 +310,32 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_VEXPRESS_UART0_DETECT + bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" + depends on ARCH_VEXPRESS && CPU_CP15_MMU + help + This option enables a simple heuristic which tries to determine + the motherboard's memory map variant (original or RS1) and then + choose the relevant UART0 base address. + + Note that this will only work with standard A-class core tiles, + and may fail with non-standard SMM or custom software models. + + config DEBUG_VEXPRESS_UART0_CA9 + bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x10009000. Except for custom models, + this applies only to the V2P-CA9 tile. + + config DEBUG_VEXPRESS_UART0_RS1 + bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x1c090000. This applies to most + of the tiles using the RS1 memory map, including all new A-class + core tiles, FPGA-based SMMs and software models. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" help @@ -369,4 +395,13 @@ config ARM_KPROBES_TEST help Perform tests of kprobes API and instruction set simulation. +config PID_IN_CONTEXTIDR + bool "Write the current PID to the CONTEXTIDR register" + depends on CPU_COPY_V6 + help + Enabling this option causes the kernel to write the current PID to + the PROCID field of the CONTEXTIDR register, at the expense of some + additional instructions during context switch. Say Y here only if you + are planning to use hardware trace tools with this kernel. + endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0298b00fe24..30eae87ead6 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -10,6 +10,9 @@ # # Copyright (C) 1995-2001 by Russell King +# Ensure linker flags are correct +LDFLAGS := + LDFLAGS_vmlinux :=-p --no-undefined -X ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 @@ -157,6 +160,7 @@ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx machine-$(CONFIG_ARCH_MXS) := mxs +machine-$(CONFIG_ARCH_MVEBU) := mvebu machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_OMAP1) := omap1 @@ -186,6 +190,7 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_VT8500) := vt8500 machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_ARCH_SOCFPGA) := socfpga machine-$(CONFIG_MACH_SPEAR1310) := spear13xx machine-$(CONFIG_MACH_SPEAR1340) := spear13xx machine-$(CONFIG_MACH_SPEAR300) := spear3xx diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 797f04bedb4..aabc02a6848 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -1,6 +1,12 @@ #include <asm/setup.h> #include <libfdt.h> +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) +#define do_extend_cmdline 1 +#else +#define do_extend_cmdline 0 +#endif + static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); @@ -36,6 +42,48 @@ static int setprop_cell(void *fdt, const char *node_path, return fdt_setprop_cell(fdt, offset, property, val); } +static const void *getprop(const void *fdt, const char *node_path, + const char *property, int *len) +{ + int offset = fdt_path_offset(fdt, node_path); + + if (offset == -FDT_ERR_NOTFOUND) + return NULL; + + return fdt_getprop(fdt, offset, property, len); +} + +static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) +{ + char cmdline[COMMAND_LINE_SIZE]; + const char *fdt_bootargs; + char *ptr = cmdline; + int len = 0; + + /* copy the fdt command line into the buffer */ + fdt_bootargs = getprop(fdt, "/chosen", "bootargs", &len); + if (fdt_bootargs) + if (len < COMMAND_LINE_SIZE) { + memcpy(ptr, fdt_bootargs, len); + /* len is the length of the string + * including the NULL terminator */ + ptr += len - 1; + } + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } + } + *ptr = '\0'; + + setprop_string(fdt, "/chosen", "bootargs", cmdline); +} + /* * Convert and fold provided ATAGs into the provided FDT. * @@ -72,8 +120,18 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) for_each_tag(atag, atag_list) { if (atag->hdr.tag == ATAG_CMDLINE) { - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); + /* Append the ATAGS command line to the device tree + * command line. + * NB: This means that if the same parameter is set in + * the device tree and in the tags, the one from the + * tags will be chosen. + */ + if (do_extend_cmdline) + merge_fdt_bootargs(fdt, + atag->u.cmdline.cmdline); + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts new file mode 100644 index 00000000000..29b9f15e759 --- /dev/null +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -0,0 +1,113 @@ +/* + * aks-cdu.dts - Device Tree file for AK signal CDU + * + * Copyright (C) 2012 AK signal Brno a.s. + * 2012 Jiri Prchal <jiri.prchal@aksignal.cz> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart2: serial@fffb8000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart3: serial@fffd0000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 15 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pioC 10 0>; + linux,default-trigger = "none"; + }; + + green { + gpios = <&pioA 5 1>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + yellow { + gpios = <&pioB 20 1>; + linux,default-trigger = "none"; + }; + + blue { + gpios = <&pioB 21 1>; + linux,default-trigger = "none"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts new file mode 100644 index 00000000000..a9af4db7234 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts new file mode 100644 index 00000000000..d6a97d9eff7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi new file mode 100644 index 00000000000..59509c48d7e --- /dev/null +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -0,0 +1,158 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex.Since + * that will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <128>; + reg = <0x48200000 0x1000>; + }; + + gpio1: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@4804C000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@481AC000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@481AE000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@44E09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@481A6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@481A8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@481AA000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + + i2c1: i2c@44E0B000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@4802A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@4819C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts new file mode 100644 index 00000000000..474f760ecad --- /dev/null +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI AM3517 EVM (AM3517/05)"; + compatible = "ti,am3517-evm", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts new file mode 100644 index 00000000000..fffd5c2a304 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -0,0 +1,42 @@ +/* + * Device Tree file for Marvell Armada 370 evaluation board + * (DB-88F6710-BP-DDR3) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Evaluation Board"; + compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + timer@d0020300 { + clock-frequency = <600000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi new file mode 100644 index 00000000000..6b6b932a5a7 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -0,0 +1,68 @@ +/* + * Device Tree Include file for Marvell Armada 370 and Armada XP SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Ben Dooks <ben.dooks@codethink.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common to the Armada + * 370 and Armada XP SoC. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Armada 370 and XP SoC"; + compatible = "marvell,armada_370_xp"; + + cpus { + cpu@0 { + compatible = "marvell,sheeva-v7"; + }; + }; + + mpic: interrupt-controller@d0020000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&mpic>; + ranges; + + serial@d0012000 { + compatible = "ns16550"; + reg = <0xd0012000 0x100>; + reg-shift = <2>; + interrupts = <41>; + status = "disabled"; + }; + serial@d0012100 { + compatible = "ns16550"; + reg = <0xd0012100 0x100>; + reg-shift = <2>; + interrupts = <42>; + status = "disabled"; + }; + + timer@d0020300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0xd0020300 0x30>; + interrupts = <37>, <38>, <39>, <40>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi new file mode 100644 index 00000000000..3228ccc8333 --- /dev/null +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -0,0 +1,35 @@ +/* + * Device Tree Include file for Marvell Armada 370 family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada 370 family SoC"; + compatible = "marvell,armada370", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts new file mode 100644 index 00000000000..f97040d4258 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -0,0 +1,50 @@ +/* + * Device Tree file for Marvell Armada XP evaluation board + * (DB-78460-BP) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP Evaluation Board"; + compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi new file mode 100644 index 00000000000..e1fa7e6edfe --- /dev/null +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -0,0 +1,55 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Ben Dooks <ben.dooks@codethink.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada XP family SoC"; + compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + serial@d0012200 { + compatible = "ns16550"; + reg = <0xd0012200 0x100>; + reg-shift = <2>; + interrupts = <43>; + status = "disabled"; + }; + serial@d0012300 { + compatible = "ns16550"; + reg = <0xd0012300 0x100>; + reg-shift = <2>; + interrupts = <44>; + status = "disabled"; + }; + + timer@d0020300 { + marvell,timer-25Mhz; + }; + + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x500>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index f449efc9825..66389c1c6f6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -52,10 +52,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; }; ramc0: ramc@ffffea00 { @@ -81,25 +82,25 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; + interrupts = <17 4 0 18 4 0 19 4 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; + interrupts = <26 4 0 27 4 0 28 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,14 +127,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -142,7 +143,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4>; + interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4>; + interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4>; + interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,21 +188,21 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; + interrupts = <10 4 2>; status = "disabled"; }; adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4>; + interrupts = <5 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -253,7 +254,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4>; + interrupts = <20 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0209913a65a..b460d6ce9eb 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -48,10 +48,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <30 31>; }; pmc: pmc@fffffc00 { @@ -68,13 +69,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; }; rstc@fffffd00 { @@ -90,7 +91,7 @@ pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -99,7 +100,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,14 +136,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,14 +170,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4>; + interrupts = <24 4 2>; status = "disabled"; }; }; @@ -200,7 +201,7 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4>; + interrupts = <29 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 7dbccaf199f..bafa8806fc1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -53,10 +53,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { @@ -78,7 +79,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; @@ -90,25 +91,25 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,7 +136,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -144,7 +145,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -153,14 +154,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,7 +188,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4>; + interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -196,14 +197,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4>; + interrupts = <25 4 3>; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4>; + interrupts = <20 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -257,14 +258,14 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index cb84de791b5..bfac0dfc332 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,7 +50,7 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; @@ -74,7 +74,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; shdwc@fffffe10 { @@ -85,25 +85,25 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -112,7 +112,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -121,7 +121,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -130,7 +130,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -139,14 +139,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -155,7 +155,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -164,7 +164,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -173,7 +173,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -201,7 +201,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 6b3ef4339ae..4a18c393b13 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -51,10 +51,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -80,37 +81,37 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -119,7 +120,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -128,7 +129,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -137,7 +138,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -146,14 +147,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -162,7 +163,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -171,7 +172,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -180,21 +181,21 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4>; + interrupts = <24 4 3>; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4>; + interrupts = <27 4 3>; status = "disabled"; }; adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -248,14 +249,14 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 4ad5160018c..3180a9c588b 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -48,7 +48,7 @@ }; rtc@80154000 { - compatible = "stericsson,db8500-rtc"; + compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 0x4>; }; @@ -60,7 +60,7 @@ interrupts = <0 119 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; @@ -73,7 +73,7 @@ interrupts = <0 120 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; @@ -86,7 +86,7 @@ interrupts = <0 121 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; @@ -99,7 +99,7 @@ interrupts = <0 122 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; @@ -112,7 +112,7 @@ interrupts = <0 123 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; @@ -125,7 +125,7 @@ interrupts = <0 124 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; @@ -138,7 +138,7 @@ interrupts = <0 125 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; @@ -151,7 +151,7 @@ interrupts = <0 126 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; @@ -164,7 +164,7 @@ interrupts = <0 127 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; @@ -206,62 +206,74 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { + regulator-compatible = "db8500_vape"; regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { + regulator-compatible = "db8500_varm"; regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { + regulator-compatible = "db8500_vmodem"; regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { + regulator-compatible = "db8500_vpll"; regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { + regulator-compatible = "db8500_vsmps1"; regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { + regulator-compatible = "db8500_vsmps2"; regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { + regulator-compatible = "db8500_vsmps3"; regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { + regulator-compatible = "db8500_vrf1"; regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-compatible = "db8500_sva_mmdsp"; regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-compatible = "db8500_sva_mmdsp_ret"; regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-compatible = "db8500_sva_pipe"; regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-compatible = "db8500_sia_mmdsp"; regulator-name = "db8500_sia_mmdsp"; }; @@ -272,38 +284,45 @@ // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-compatible = "db8500_sia_pipe"; regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { + regulator-compatible = "db8500_sga"; regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-compatible = "db8500_b2r2_mcde"; regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { + regulator-compatible = "db8500_esram12"; regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-compatible = "db8500_esram12_ret"; regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { + regulator-compatible = "db8500_esram34"; regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-compatible = "db8500_esram34_ret"; regulator-name = "db8500-esram34-ret"; }; }; @@ -312,12 +331,70 @@ compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; ab8500-regulators { compatible = "stericsson,ab8500-regulator"; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-compatible = "ab8500_ldo_aux1"; regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; @@ -328,6 +405,7 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-compatible = "ab8500_ldo_aux2"; regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -335,6 +413,7 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-compatible = "ab8500_ldo_aux3"; regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -342,41 +421,49 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-compatible = "ab8500_ldo_initcore"; regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-compatible = "ab8500_ldo_tvout"; regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-compatible = "ab8500_ldo_usb"; regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-compatible = "ab8500_ldo_audio"; regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-compatible = "ab8500_ldo_anamic1"; regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-compatible = "ab8500_ldo_amamic2"; regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-compatible = "ab8500_ldo_dmic"; regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-compatible = "ab8500_ldo_ana"; regulator-name = "V-CSI/DSI"; }; }; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts new file mode 100644 index 00000000000..d79b28d9c96 --- /dev/null +++ b/arch/arm/boot/dts/ea3250.dts @@ -0,0 +1,174 @@ +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x4000000>; + }; + + ahb { + mac: ethernet@31060000 { + phy-mode = "rmii"; + use-iram; + }; + + /* Here, choose exactly one from: ohci, usbd */ + ohci@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; + +/* + usbd@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; +*/ + + /* 128MB Flash via SLC NAND controller */ + slc: flash@20020000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@00080000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@00140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@00540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; + + apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + + uart6: serial@40098000 { + status = "okay"; + }; + + i2c1: i2c@400A0000 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "at,24c64"; + reg = <0x57>; + }; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; + }; + + i2c2: i2c@400A8000 { + clock-frequency = <100000>; + }; + + i2cusb: i2c@31020300 { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; + }; + + sd@20098000 { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; + }; + + fab { + uart1: serial@40014000 { + status = "okay"; + }; + + /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ + adc@40048000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts new file mode 100644 index 00000000000..b7354e6506d --- /dev/null +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -0,0 +1,41 @@ +/* + * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + model = "Telit EVK-PRO3 for Telit GE863-PRO3"; + compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b8c476384ee..0c49caa0997 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -134,4 +134,16 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 27afc8e535c..1beccc8f14f 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -179,4 +179,42 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + gpios = <&gpc1 1 5 3 0>, + <&gpc1 3 5 3 0>, + <&gpc1 4 5 3 0>; + + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpc1 2 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a1dd2ee8375..02891fe876e 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -25,6 +25,12 @@ compatible = "samsung,exynos4210"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -33,6 +39,17 @@ reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -147,6 +164,36 @@ interrupts = <0 65 0>; }; + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49945cc1bc7..8a5e348793c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -71,4 +71,42 @@ i2c@12CD0000 { status = "disabled"; }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpa2 5 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4272b294922..004aaa8d123 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -23,6 +23,12 @@ compatible = "samsung,exynos5250"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -146,6 +152,36 @@ #size-cells = <0>; }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 5>; /* preliminary */ + rx-dma-channel = <&pdma1 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi new file mode 100644 index 00000000000..17136fc7a51 --- /dev/null +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -0,0 +1,52 @@ +/* + * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "at91sam9260.dtsi" + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <6000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; + + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs"; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 83e72294aef..9fecf1ae777 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -1,5 +1,5 @@ /* - * Copyright 2011 Calxeda, Inc. + * Copyright 2011-2012 Calxeda, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -24,6 +24,7 @@ compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; + clock-ranges; cpus { #address-cells = <1>; @@ -33,24 +34,32 @@ compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@1 { compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@2 { compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@3 { compatible = "arm,cortex-a9"; reg = <3>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; }; @@ -75,12 +84,14 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xfff10600 0x20>; interrupts = <1 13 0xf01>; + clocks = <&a9periphclk>; }; watchdog@fff10620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xfff10620 0x20>; interrupts = <1 14 0xf01>; + clocks = <&a9periphclk>; }; intc: interrupt-controller@fff11000 { @@ -116,12 +127,21 @@ compatible = "calxeda,hb-sdhci"; reg = <0xffe0e000 0x1000>; interrupts = <0 90 4>; + clocks = <&eclk>; + }; + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; }; ipc@fff20000 { compatible = "arm,pl320", "arm,primecell"; reg = <0xfff20000 0x1000>; interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioe: gpio@fff30000 { @@ -130,6 +150,8 @@ gpio-controller; reg = <0xfff30000 0x1000>; interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiof: gpio@fff31000 { @@ -138,6 +160,8 @@ gpio-controller; reg = <0xfff31000 0x1000>; interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiog: gpio@fff32000 { @@ -146,6 +170,8 @@ gpio-controller; reg = <0xfff32000 0x1000>; interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioh: gpio@fff33000 { @@ -154,24 +180,32 @@ gpio-controller; reg = <0xfff33000 0x1000>; interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer { compatible = "arm,sp804", "arm,primecell"; reg = <0xfff34000 0x1000>; interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@fff35000 { compatible = "arm,pl031", "arm,primecell"; reg = <0xfff35000 0x1000>; interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; smic@fff3a000 { @@ -186,12 +220,79 @@ sregs@fff3c000 { compatible = "calxeda,hb-sregs"; reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; + }; + + sregs@fff3c200 { + compatible = "calxeda,hb-sregs-l2-ecc"; + reg = <0xfff3c200 0x100>; + interrupts = <0 71 4 0 72 4>; }; dma@fff3d000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfff3d000 0x1000>; interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ethernet@fff50000 { diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 70bffa929b6..e3486f486b4 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -22,17 +22,60 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; - bus-width = <8>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>; + panel-enable-gpios = <&gpio1 18 0>; status = "okay"; }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -40,4 +83,23 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts new file mode 100644 index 00000000000..20912b1d889 --- /dev/null +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "i.MX23 Olinuxino Low Cost Board"; + compatible = "olimex,imx23-olinuxino", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts new file mode 100644 index 00000000000..757a327ff3e --- /dev/null +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale STMP378x Development Board"; + compatible = "fsl,stmp378x-devb", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8c5f9994f3f..a874dbfb5ae 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -18,6 +18,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + serial0 = &auart0; + serial1 = &auart1; }; cpus { @@ -57,13 +59,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; + gpmi-nand@8000c000 { + compatible = "fsl,imx23-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <13>, <56>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -114,24 +118,151 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,pinmux-ids = < + 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ + 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ + 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ + 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ + 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ + 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ + 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ + 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ + 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ + 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ + 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ + 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ + 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ + 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ + 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ + 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_fixup: gpmi-pins-fixup { + fsl,pinmux-ids = < + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + >; + fsl,drive-strength = <2>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2020 0x2030 0x2040 - 0x2050 0x0082 0x0092 0x00a2 - 0x00b2 0x2000 0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ + 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ + 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ + 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_pins_fixup: mmc0-pins-fixup { - fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ + 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ + 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ + 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ + 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ + 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ + 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ + 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ + 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ + 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ + 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; fsl,pull-up = <0>; }; }; @@ -172,7 +303,9 @@ }; lcdif@80030000 { + compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; + interrupts = <46 45>; status = "disabled"; }; @@ -242,12 +375,16 @@ }; rtc@8005c000 { + compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; reg = <0x8005c000 2000>; - status = "disabled"; + interrupts = <22>; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <5>; status = "disabled"; }; @@ -257,12 +394,16 @@ }; auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; status = "disabled"; }; auart1: serial@8006e000 { + compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; + interrupts = <59 60 58>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts new file mode 100644 index 00000000000..d3f8296e19e --- /dev/null +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "mx27_3ds"; + compatible = "freescale,imx27-3ds", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 386c769c38d..00bae3aad5a 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -121,7 +121,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@10015100 { @@ -131,7 +131,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@10015200 { @@ -141,7 +141,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@10015300 { @@ -151,7 +151,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@10015400 { @@ -161,7 +161,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@10015500 { @@ -171,7 +171,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; cspi3: cspi@10017000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts new file mode 100644 index 00000000000..b383417a558 --- /dev/null +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -0,0 +1,198 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Bluegiga APX4 Development Kit"; + compatible = "bluegiga,apx4devkit", "fsl,imx28"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ + 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ + 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ + 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ + 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ + 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { + fsl,pinmux-ids = < + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + >; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "bluegiga,apx4devkit-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "apx4devkit-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 28 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts new file mode 100644 index 00000000000..c03a577beca --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Crystalfontz CFA-10036 Board"; + compatible = "crystalfontz,cfa10036", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio3 4 1>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ee520a529cb..773c0e84d1f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -22,6 +22,13 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -29,6 +36,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -36,6 +44,72 @@ compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ + 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ + 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ + 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ + 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + panel-enable-gpios = <&gpio3 30 0>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; status = "okay"; }; }; @@ -68,19 +142,58 @@ }; }; + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; status = "okay"; }; @@ -102,6 +215,40 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; }; sound { @@ -111,4 +258,21 @@ saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts new file mode 100644 index 00000000000..183a3fd2d85 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "DENX M28EVK"; + compatible = "denx,m28evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ + 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ + 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,mt41t62"; + reg = <0x68>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio3 11 0>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "denx,m28evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "m28evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts new file mode 100644 index 00000000000..62bf767409a --- /dev/null +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -0,0 +1,97 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Ka-Ro electronics TX28 module"; + compatible = "karo,tx28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio4 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4634cb861a5..787efac68da 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -22,6 +22,11 @@ gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; }; cpus { @@ -68,15 +73,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - interrupts = <41>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; - interrupts = <42 88>; + gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -161,7 +166,150 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x3102 0x3112>; + fsl,pinmux-ids = < + 0x3102 /* MX28_PAD_PWM0__DUART_RX */ + 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_pins_b: duart@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_4pins_a: duart-4pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ + 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ + 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ + 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ + 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ + 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ + 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ + 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ + 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ + 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ + 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ + 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_status_cfg: gpmi-status-cfg { + fsl,pinmux-ids = < + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <2>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ + 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_pins_a: auart1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ + 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart2_2pins_a: auart2-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ + 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_pins_a: auart3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ + 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_2pins_a: auart3-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ + 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; @@ -169,9 +317,17 @@ mac0_pins_a: mac0@0 { reg = <0>; - fsl,pinmux-ids = <0x4000 0x4010 0x4020 - 0x4030 0x4040 0x4060 0x4070 - 0x4080 0x4100>; + fsl,pinmux-ids = < + 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ + 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ + 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ + 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ + 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ + 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ + 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ + 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ + 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -179,8 +335,14 @@ mac1_pins_a: mac1@0 { reg = <0>; - fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 - 0x40e1 0x40b1 0x40c1>; + fsl,pinmux-ids = < + 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ + 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ + 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ + 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ + 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ + 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -188,28 +350,61 @@ mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2000 0x2010 0x2020 - 0x2030 0x2040 0x2050 0x2060 - 0x2070 0x2080 0x2090 0x20a0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ + 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ + 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ + 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_cd_cfg: mmc0-cd-cfg { - fsl,pinmux-ids = <0x2090>; + fsl,pinmux-ids = < + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + >; fsl,pull-up = <0>; }; mmc0_sck_cfg: mmc0-sck-cfg { - fsl,pinmux-ids = <0x20a0>; + fsl,pinmux-ids = < + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <2>; fsl,pull-up = <0>; }; i2c0_pins_a: i2c0@0 { reg = <0>; - fsl,pinmux-ids = <0x3180 0x3190>; + fsl,pinmux-ids = < + 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ + 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -217,8 +412,12 @@ saif0_pins_a: saif0@0 { reg = <0>; - fsl,pinmux-ids = - <0x3140 0x3150 0x3160 0x3170>; + fsl,pinmux-ids = < + 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -226,11 +425,88 @@ saif1_pins_a: saif1@0 { reg = <0>; - fsl,pinmux-ids = <0x31a0>; + fsl,pinmux-ids = < + 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; + + pwm0_pins_a: pwm0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ + 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ + 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ + 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ + 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ + 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can0_pins_a: can0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ + 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can1_pins_a: can1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ + 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -272,18 +548,21 @@ }; lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 2000>; interrupts = <9>; status = "disabled"; @@ -370,9 +649,9 @@ }; rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 2000>; - interrupts = <28 29>; - status = "disabled"; + interrupts = <29>; }; i2c0: i2c@80058000 { @@ -381,6 +660,7 @@ compatible = "fsl,imx28-i2c"; reg = <0x80058000 2000>; interrupts = <111 68>; + clock-frequency = <100000>; status = "disabled"; }; @@ -390,11 +670,15 @@ compatible = "fsl,imx28-i2c"; reg = <0x8005a000 2000>; interrupts = <110 69>; + clock-frequency = <100000>; status = "disabled"; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <8>; status = "disabled"; }; @@ -404,30 +688,35 @@ }; auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; status = "disabled"; }; auart1: serial@8006c000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; status = "disabled"; }; auart2: serial@8006e000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; status = "disabled"; }; auart3: serial@80070000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; status = "disabled"; }; auart4: serial@80072000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; status = "disabled"; @@ -441,11 +730,13 @@ }; usbphy0: usbphy@8007c000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; status = "disabled"; }; usbphy1: usbphy@8007e000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; status = "disabled"; }; @@ -459,13 +750,19 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl0: usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; + interrupts = <93>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; - usbctrl1: usbctrl@80090000 { + usb1: usb@80090000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; + interrupts = <92>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts new file mode 100644 index 00000000000..24731cb78e8 --- /dev/null +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -0,0 +1,31 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx31.dtsi" + +/ { + model = "Buglabs i.MX31 Bug 1.x"; + compatible = "fsl,imx31-bug", "fsl,imx31"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; + + soc { + aips@43f00000 { /* AIPS1 */ + uart5: serial@43fb4000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi new file mode 100644 index 00000000000..eef7099f3e3 --- /dev/null +++ b/arch/arm/boot/dts/imx31.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + avic: avic-interrupt-controller@60000000 { + compatible = "fsl,imx31-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000000 0x100000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + uart1: serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + + uart4: serial@43fb0000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb0000 0x4000>; + interrupts = <46>; + status = "disabled"; + }; + + uart5: serial@43fb4000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb4000 0x4000>; + interrupts = <47>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x100000>; + ranges; + + uart3: serial@5000c000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index bfa65abe8ef..53cbaa3d4f9 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -127,43 +127,43 @@ }; gpio1: gpio@73f84000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; interrupts = <50 51>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@73f88000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f88000 0x4000>; interrupts = <52 53>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@73f8c000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f8c000 0x4000>; interrupts = <54 55>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@73f90000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f90000 0x4000>; interrupts = <56 57>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@73f98000 { /* WDOG1 */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index e3e869470cd..fc79cdc4b4e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -129,43 +129,43 @@ }; gpio1: gpio@53f84000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; interrupts = <50 51>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@53f88000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f88000 0x4000>; interrupts = <52 53>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@53f8c000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f8c000 0x4000>; interrupts = <54 55>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@53f90000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f90000 0x4000>; interrupts = <56 57>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@53f98000 { /* WDOG1 */ @@ -197,33 +197,33 @@ }; gpio5: gpio@53fdc000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; interrupts = <103 104>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@53fe0000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fe0000 0x4000>; interrupts = <105 106>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@53fe4000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fe4000 0x4000>; interrupts = <107 108>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; i2c@53fec000 { /* I2C3 */ diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index db4c6096c56..d792581672c 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -22,6 +22,12 @@ }; soc { + gpmi-nand@00112000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0ec92973e7..d42e851ceb9 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -27,6 +27,8 @@ ecspi@02008000 { /* eCSPI1 */ fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; status = "okay"; flash: m25p80@0 { @@ -42,9 +44,31 @@ }; }; + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_hog>; + + gpios { + pinctrl_gpio_hog: gpiohog { + fsl,pins = < + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ + usb@02184000 { /* USB OTG */ + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; + }; + + usb@02184200 { /* USB1 */ + status = "okay"; + }; + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; @@ -111,6 +135,15 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8c90cbac945..3d3c64b014e 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -87,6 +87,23 @@ interrupt-parent = <&intc>; ranges; + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + }; + + gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -260,73 +277,73 @@ }; gpio1: gpio@0209c000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 0x04 0 67 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@020a0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 0x04 0 69 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@020a4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 0x04 0 71 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@020a8000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 0x04 0 73 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@020ac000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 0x04 0 75 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@020b0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 0x04 0 77 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@020b4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 0x04 0 79 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; kpp@020b8000 { @@ -444,12 +461,14 @@ }; }; - usbphy@020c9000 { /* USBPHY1 */ + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; }; - usbphy@020ca000 { /* USBPHY2 */ + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; }; @@ -495,6 +514,30 @@ }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ @@ -538,6 +581,14 @@ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ }; }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -573,6 +624,36 @@ reg = <0x0217c000 0x4000>; }; + usb@02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; + status = "disabled"; + }; + + usb@02184200 { /* USB1 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + fsl,usbphy = <&usbphy2>; + status = "disabled"; + }; + + usb@02184400 { /* USB2 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + status = "disabled"; + }; + + usb@02184600 { /* USB3 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + status = "disabled"; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index dc09a735b04..9a33077130e 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -4,7 +4,7 @@ / { model = "D-Link DNS-320 NAS (Rev A1)"; - compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index c2a5562525d..16734c1b5df 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -4,7 +4,7 @@ / { model = "D-Link DNS-325 NAS (Rev A1)"; - compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index a5376b84227..78b0f06a09a 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -4,7 +4,7 @@ / { model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index ada0f0c2308..f59dcf6dc45 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -4,7 +4,7 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 1ba75d4adec..026a1f82d81 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -4,7 +4,7 @@ / { model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 926528b81ba..f95dbc190ab 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,7 +1,7 @@ /include/ "skeleton.dtsi" / { - compatible = "mrvl,kirkwood"; + compatible = "marvell,kirkwood"; ocp@f1000000 { compatible = "simple-bus"; @@ -28,7 +28,7 @@ }; rtc@10300 { - compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc"; + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; }; @@ -39,7 +39,7 @@ cle = <0>; ale = <1>; bank-width = <1>; - compatible = "mrvl,orion-nand"; + compatible = "marvell,orion-nand"; reg = <0x3000000 0x400>; chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3f5dad801a9..e5ffe960dbf 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -35,13 +35,14 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; - status = "disable"; + status = "disabled"; }; - mlc: flash@200B0000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; - reg = <0x200B0000 0x1000>; - status = "disable"; + reg = <0x200a8000 0x11000>; + interrupts = <11 0>; + status = "disabled"; }; dma@31000000 { @@ -57,21 +58,21 @@ compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x31020000 0x300>; interrupts = <0x3b 0>; - status = "disable"; + status = "disabled"; }; usbd@31020000 { compatible = "nxp,lpc3220-udc"; reg = <0x31020000 0x300>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disable"; + status = "disabled"; }; clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; - status = "disable"; + status = "disabled"; }; mac: ethernet@31060000 { @@ -114,9 +115,10 @@ }; sd@20098000 { - compatible = "arm,pl180", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; + status = "disabled"; }; i2s1: i2s@2009C000 { @@ -124,24 +126,42 @@ reg = <0x2009C000 0x1000>; }; + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; + }; + uart3: serial@40080000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; + interrupts = <7 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart4: serial@40088000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - }; - - uart5: serial@40090000 { - compatible = "nxp,serial"; - reg = <0x40090000 0x1000>; + interrupts = <8 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart6: serial@40098000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; + interrupts = <10 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; i2c1: i2c@400A0000 { @@ -192,18 +212,24 @@ }; uart1: serial@40014000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; + interrupts = <26 0>; + status = "disabled"; }; uart2: serial@40018000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; + interrupts = <25 0>; + status = "disabled"; }; - uart7: serial@4001C000 { - compatible = "nxp,serial"; - reg = <0x4001C000 0x1000>; + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 0>; + status = "disabled"; }; rtc@40024000 { @@ -235,21 +261,28 @@ compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; + interrupts = <54 0>; + status = "disabled"; }; + pwm: pwm@4005C000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C000 0x8>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts new file mode 100644 index 00000000000..25b50b759de --- /dev/null +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap2.dtsi" + +/ { + model = "TI OMAP2420 H4 board"; + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x84000000>; /* 64 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c0a8c..cdcb98c7e07 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,9 +61,9 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16ec59b..f349ee9182c 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,31 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa5fac..81094719820 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,10 @@ compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; }; + + wdt2: wdt@48314000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c58798..9880c12877b 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -32,6 +32,30 @@ linux,default-trigger = "mmc0"; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &i2c1 { @@ -43,6 +67,19 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; }; /include/ "twl6030.dtsi" @@ -74,15 +111,15 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts new file mode 100644 index 00000000000..d4ba43a48d9 --- /dev/null +++ b/arch/arm/boot/dts/omap4-pandaES.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d13728..72216e932fc 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -28,6 +28,14 @@ regulator-boot-on; }; + vbat: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3750000>; + regulator-max-microvolt = <3750000>; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; debug0 { @@ -70,6 +78,41 @@ gpios = <&gpio5 11 0>; /* 139 */ }; }; + + sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; + }; }; &i2c1 { @@ -81,6 +124,31 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; }; /include/ "twl6030.dtsi" @@ -147,11 +215,11 @@ }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts new file mode 100644 index 00000000000..6601e6af609 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var_som.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "Variscite OMAP4 SOM"; + compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11>; /* gpio line 171 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 359c4979c8a..04cbbcb6ff9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -272,5 +272,28 @@ ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + wdt2: wdt@4a314000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts new file mode 100644 index 00000000000..200c39ad1c8 --- /dev/null +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap5.dtsi" + +/ { + model = "TI OMAP5 EVM board"; + compatible = "ti,omap5-evm", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi new file mode 100644 index 00000000000..57e52708374 --- /dev/null +++ b/arch/arm/boot/dts/omap5.dtsi @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +/* + * Carveout for multimedia usecases + * It should be the last 48MB of the first 512MB memory part + * In theory, it should not even exist. That zone should be reserved + * dynamically during the .reserve callback. + */ +/memreserve/ 0x9d000000 0x03000000; + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap5"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a15"; + }; + cpu@1 { + compatible = "arm,cortex-a15"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@48066000 { + compatible = "ti,omap5-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@48068000 { + compatible = "ti,omap6-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index c4ff6d1a018..802ec5b2fd0 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -54,6 +54,17 @@ #address-cells = <1>; #size-cells = <1>; + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + mtd0@00000000 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; @@ -83,6 +94,14 @@ }; apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + i2c1: i2c@400A0000 { clock-frequency = <100000>; @@ -114,16 +133,58 @@ }; ssp0: ssp@20084000 { + #address-cells = <1>; + #size-cells = <0>; + pl022,num-chipselects = <1>; + cs-gpios = <&gpio 3 5 0>; + eeprom: at25@0 { + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; }; }; + + sd@20098000 { + wp-gpios = <&gpio 3 0 0>; + cd-gpios = <&gpio 3 1 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; }; fab { + uart2: serial@40018000 { + status = "okay"; + }; + tsc@40048000 { status = "okay"; }; + + key@40050000 { + status = "okay"; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi new file mode 100644 index 00000000000..798fa35c000 --- /dev/null +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -0,0 +1,21 @@ +/* + * Device Tree Source for the r8a7740 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7740"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7377.dtsi new file mode 100644 index 00000000000..767ee0796da --- /dev/null +++ b/arch/arm/boot/dts/sh7377.dtsi @@ -0,0 +1,21 @@ +/* + * Device Tree Source for the sh7377 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,sh7377"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index ec3c3397511..7e334d4cae2 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -77,6 +77,8 @@ used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; + default-state = "on"; + linux,default-trigger = "heartbeat"; }; }; @@ -101,15 +103,30 @@ }; }; + // External Micro SD slot sdi@80126000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + + #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 + cd-inverted; + + status = "okay"; }; + // On-board eMMC sdi@80114000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; }; uart@80120000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi new file mode 100644 index 00000000000..0772f5739f5 --- /dev/null +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2012 Altera <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &gmac0; + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + intc: intc@fffed000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffed000 0x1000>, + <0xfffec100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@ffe01000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffe01000 0x1000>; + interrupts = <0 180 4>; + }; + }; + + gmac0: stmmac@ff700000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0xff700000 0x2000>; + interrupts = <0 115 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ + phy-mode = "gmii"; + }; + + L2: l2-cache@fffef000 { + compatible = "arm,pl310-cache"; + reg = <0xfffef000 0x1000>; + interrupts = <0 38 0x04>; + cache-unified; + cache-level = <2>; + }; + + /* Local timer */ + timer@fffec600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfffec600 0x100>; + interrupts = <1 13 0xf04>; + }; + + timer0: timer@ffc08000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 167 4>; + clock-frequency = <200000000>; + reg = <0xffc08000 0x1000>; + }; + + timer1: timer@ffc09000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 168 4>; + clock-frequency = <200000000>; + reg = <0xffc09000 0x1000>; + }; + + timer2: timer@ffd00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 169 4>; + clock-frequency = <200000000>; + reg = <0xffd00000 0x1000>; + }; + + timer3: timer@ffd01000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 170 4>; + clock-frequency = <200000000>; + reg = <0xffd01000 0x1000>; + }; + + uart0: uart@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 162 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: uart@ffc03000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc03000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 163 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts new file mode 100644 index 00000000000..ab7e4a94299 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + model = "Altera SOCFPGA Cyclone V"; + compatible = "altr,socfpga-cyclone5"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x10000000>; /* 256MB */ + }; +}; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 10dcec7e732..f7b84aced65 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -43,8 +43,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index c13fd1f3b09..e4e912f9502 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a42c50..a3c36e47d7e 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fc..f146dbf6f7f 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5ae..684a9e1ff7e 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd9..85e621ab296 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -129,14 +124,14 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -176,7 +171,7 @@ conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "cdev1", "cdev2", "dap1", "dap2", - "dap4", "dtf", "gma", "gmc", "gmd", + "dap4", "ddc", "dtf", "gma", "gmc", "gmd", "gme", "gpu", "gpu7", "i2cp", "irrx", "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", @@ -185,7 +180,7 @@ nvidia,tristate = <0>; }; conf_ate { - nvidia,pins = "ate", "csus", "dap3", "ddc", + nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; nvidia,pull = <0>; @@ -255,6 +250,39 @@ nvidia,slew-rate-falling = <3>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -303,12 +331,37 @@ i2c@7000c400 { status = "okay"; clock-frequency = <100000>; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; - smart-battery@b { - compatible = "ti,bq20z75", "smart-battery-1.1"; - reg = <0xb>; - ti,i2c-retry-count = <2>; - ti,poll-retry-count = <10>; + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; }; @@ -334,7 +387,7 @@ }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +450,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f..27fb8a67ea4 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -276,9 +276,11 @@ usb@c5000000 { status = "okay"; + nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ }; usb@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbd..be90544e6b5 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts new file mode 100644 index 00000000000..6916310bf58 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -0,0 +1,301 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Whistler evaluation board"; + compatible = "nvidia,whistler", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata", "atb", "ate", "gma", "gmb", + "gmc", "gmd", "gpu"; + nvidia,function = "gmi"; + }; + atc { + nvidia,pins = "atc", "atd"; + nvidia,function = "sdio4"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "osc"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + }; + dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gme { + nvidia,pins = "gme"; + nvidia,function = "dap5"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + kbca { + nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + kbcb { + nvidia,pins = "kbcb", "kbcd"; + nvidia,function = "sdio2"; + }; + lcsn { + nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", + "spia", "spib", "spic"; + nvidia,function = "spi3"; + }; + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldc", "ldi", + "lhp0", "lhp1", "lhp2", "lhs", "lm0", + "lm1", "lpp", "lpw0", "lpw1", "lpw2", + "lsc0", "lsc1", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "uac"; + nvidia,function = "owr"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxa", + "slxc", "slxd", "slxk"; + nvidia,function = "sdio3"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + spdi { + nvidia,pins = "spdi", "spdo"; + nvidia,function = "rsvd2"; + }; + spid { + nvidia,pins = "spid", "spie", "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + spif { + nvidia,pins = "spif"; + nvidia,function = "spi2"; + }; + uaa { + nvidia,pins = "uaa", "uab"; + nvidia,function = "uarta"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + uda { + nvidia,pins = "uda"; + nvidia,function = "spi1"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "ddc", "gma", + "gmb", "gmc", "gmd", "irrx", "irtx", + "kbca", "kbcb", "kbcc", "kbcd", "kbce", + "kbcf", "sdc", "sdd", "spie", "spig", + "spih", "uaa", "uab", "uad", "uca", + "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_atd { + nvidia,pins = "atd", "ate", "cdev1", "csus", + "dap1", "dap2", "dap3", "dap4", "dte", + "dtf", "gpu", "gpu7", "gpv", "i2cp", + "rm", "sdio1", "slxa", "slxc", "slxd", + "slxk", "spdi", "spdo", "uac", "uda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_cdev2 { + nvidia,pins = "cdev2", "spia", "spib"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "lc", "pmca", + "pmcb", "pmcc", "pmcd", "xm2c", + "xm2d"; + nvidia,pull = <0>; + }; + conf_crtp { + nvidia,pins = "crtp"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; + conf_gme { + nvidia,pins = "gme", "owc", "pta", "spic"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + conf_ls { + nvidia,pins = "ls", "pmce"; + nvidia,pull = <2>; + }; + drive_dap1 { + nvidia,pins = "drive_dap1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <0>; + nvidia,pull-down-strength = <0>; + nvidia,pull-up-strength = <0>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + codec: codec@1a { + compatible = "wlf,wm8753"; + reg = <0x1a>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + usb@c5008000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753"; + nvidia,model = "NVIDIA Tegra Whistler"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1", + "MIC2", "Mic Jack", + "MIC2N", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e902..405d1673904 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -72,7 +72,7 @@ reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70002a00 { @@ -80,7 +80,7 @@ reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - status = "disable"; + status = "disabled"; }; serial@70006000 { @@ -88,7 +88,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -96,7 +96,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -104,7 +104,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -112,7 +112,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -120,7 +120,13 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; + }; + + pwm { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; }; i2c@7000c000 { @@ -129,7 +135,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -138,7 +144,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -147,7 +153,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -156,7 +162,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -164,7 +170,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +183,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; @@ -190,7 +196,7 @@ interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; - status = "disable"; + status = "disabled"; }; usb@c5004000 { @@ -198,7 +204,7 @@ reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; - status = "disable"; + status = "disabled"; }; usb@c5008000 { @@ -206,35 +212,35 @@ reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; - status = "disable"; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec4..c169bced131 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b..3e4334d14ef 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -82,7 +82,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -90,7 +90,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -98,7 +98,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -106,7 +106,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -114,7 +114,13 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; + }; + + pwm { + compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; }; i2c@7000c000 { @@ -123,7 +129,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -132,7 +138,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -141,7 +147,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c700 { @@ -150,7 +156,7 @@ interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -159,7 +165,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -167,7 +173,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -201,35 +207,35 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - status = "disable"; + status = "disabled"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - status = "disable"; + status = "disabled"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - status = "disable"; + status = "disabled"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - status = "disable"; + status = "disabled"; }; }; @@ -237,28 +243,28 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 16076e2d093..d8a827bd2bf 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -55,6 +55,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@2,03000000 { @@ -157,6 +159,7 @@ v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -197,5 +200,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index a6c9c7c82d5..dba53fd026b 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -54,6 +54,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@3,03000000 { @@ -156,6 +158,7 @@ v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -196,5 +199,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 7e1091d91af..d12b34ca056 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -14,8 +14,8 @@ arm,hbi = <0x237>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { }; @@ -47,23 +47,23 @@ memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x40000000>; + reg = <0 0x80000000 0 0x40000000>; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; - reg = <0x2b000000 0x1000>; + reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; - reg = <0x2b0a0000 0x1000>; + reg = <0 0x2b0a0000 0 0x1000>; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; - reg = <0x2b060000 0x1000>; + reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; }; @@ -72,23 +72,23 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; }; memory-controller@7ffd0000 { compatible = "arm,pl354", "arm,primecell"; - reg = <0x7ffd0000 0x1000>; + reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; }; dma@7ffb0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x7ffb0000 0x1000>; + reg = <0 0x7ffb0000 0 0x1000>; interrupts = <0 92 4>, <0 88 4>, <0 89 4>, @@ -111,12 +111,12 @@ }; motherboard { - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts new file mode 100644 index 00000000000..4890a81c546 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -0,0 +1,188 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 A7x3 + * Cortex-A15_A7 MPCore (V2P-CA15_A7) + * + * HBI-0249A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15_CA7"; + arm,hbi = <0x249>; + compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + +/* A7s disabled till big.LITTLE patches are available... + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + }; +*/ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + wdt@2a490000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0 0x2a490000 0 0x1000>; + interrupts = <98>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0 0x2b0a0000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0 0x7ff00000 0 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index aa07f5938f0..1143c4d5c56 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -452,6 +452,7 @@ static struct dma_map_ops dmabounce_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, + .get_sgtable = arm_dma_get_sgtable, .map_page = dmabounce_map_page, .unmap_page = dmabounce_unmap_page, .sync_single_for_cpu = dmabounce_sync_for_cpu, diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index ddc9fe6a78a..7d8718468e0 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -5,10 +5,7 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -21,7 +18,7 @@ CONFIG_ARCH_SHMOBILE=y CONFIG_ARCH_R8A7740=y CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y # CONFIG_CACHE_L2X0 is not set CONFIG_ARM_ERRATA_430973=y @@ -39,6 +36,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_NET=y @@ -89,26 +87,32 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_DEV=y +# CONFIG_RC_CORE is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +# CONFIG_V4L_USB_DRIVERS is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9T112=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set -CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y @@ -116,6 +120,8 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_DNOTIFY is not set @@ -124,7 +130,6 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_V4_1=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig new file mode 100644 index 00000000000..e40b435d204 --- /dev/null +++ b/arch/arm/configs/exynos_defconfig @@ -0,0 +1,92 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y +CONFIG_ARCH_EXYNOS=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C24XX_PWM=y +CONFIG_ARCH_EXYNOS5=y +CONFIG_MACH_EXYNOS4_DT=y +CONFIG_MACH_EXYNOS5_DT=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_RFKILL_REGULATOR=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_NETDEVICES=y +CONFIG_SMSC911X=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +CONFIG_MFD_TPS65090=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_FB=y +CONFIG_EXYNOS_VIDEO=y +CONFIG_EXYNOS_MIPI_DSI=y +CONFIG_EXYNOS_DP=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_7x14=y +CONFIG_LOGO=y +CONFIG_USB=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e05a2f1665a..78ed575feb1 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -2,7 +2,10 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -36,8 +39,6 @@ CONFIG_MACH_IMX27IPCAM=y CONFIG_MACH_IMX27_DT=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -46,7 +47,6 @@ CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y -CONFIG_SMSC911X=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y @@ -70,31 +70,31 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y +CONFIG_ATA=y +CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y CONFIG_CS89x0_PLATFORM=y CONFIG_DM9000=y CONFIG_SMC91X=y CONFIG_SMC911X=y +CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_KEYBOARD_IMX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_MC13783=m -# CONFIG_SERIO is not set +CONFIG_TOUCHSCREEN_MC13783=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y @@ -113,31 +113,23 @@ CONFIG_HWMON=m CONFIG_SENSORS_MC13783_ADC=m CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y -CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y -CONFIG_FB=y -CONFIG_FB_IMX=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_MEDIA=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y -CONFIG_VIDEO_MX2_HOSTSUPPORT=y CONFIG_VIDEO_MX2=y +CONFIG_FB=y +CONFIG_FB_IMX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y @@ -152,13 +144,17 @@ CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_MX27VIS_AIC32X4=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB_HID=m CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_ULPI=y CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_MXC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -173,22 +169,25 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y +CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index b1d3675df72..f725b9637b3 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -2,6 +2,8 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y CONFIG_RELAY=y @@ -29,15 +31,12 @@ CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y -CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y CONFIG_MACH_IMX53_DT=y CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y @@ -64,17 +63,29 @@ CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y -# CONFIG_STANDALONE is not set -CONFIG_CONNECTOR=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -105,8 +116,11 @@ CONFIG_SMSC911X=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_IMX=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_MC13783=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m @@ -116,6 +130,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MXC_RNGA=y CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y @@ -130,42 +145,37 @@ CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y -CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y +CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y -CONFIG_MX3_VIDEO=y CONFIG_VIDEO_MX3=y CONFIG_FB=y -CONFIG_FB_MX3=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y @@ -178,9 +188,12 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_COMMON_CLK_DEBUG=y +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -204,8 +217,9 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=m +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y @@ -216,14 +230,11 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set CONFIG_SECURITYFS=y -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig new file mode 100644 index 00000000000..26146ffea1a --- /dev/null +++ b/arch/arm/configs/kzm9d_defconfig @@ -0,0 +1,89 @@ +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_EMEV2=y +CONFIG_MACH_KZM9D=y +CONFIG_MEMORY_START=0x40000000 +CONFIG_MEMORY_SIZE=0x10000000 +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_SWP_EMULATE is not set +# CONFIG_CACHE_L2X0 is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +# CONFIG_LOCAL_TIMERS is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE_FORCE=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EM=y +# CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_EM=y +# CONFIG_HWMON is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index e3ebc20ed0a..2388c861062 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -100,7 +100,12 @@ CONFIG_SND_SOC_SH4_FSI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_R8A66597_HCD=y +CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_SDHI=y @@ -108,12 +113,13 @@ CONFIG_MMC_SH_MMCIF=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RS5C372=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set +CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 4fa60547494..e42a0e3d4c3 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 @@ -16,8 +18,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -52,13 +53,17 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_MTD_NAND_SLC_LPC32XX=y +CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -79,16 +84,23 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set +CONFIG_INPUT_MATRIXKMAP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_LPC32XX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_LPC32XX=y +CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_HS_LPC32XX=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -96,7 +108,8 @@ CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_DS620=y +CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y CONFIG_PNX4008_WATCHDOG=y CONFIG_FB=y @@ -133,6 +146,8 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PCA9532=y +CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y @@ -146,10 +161,10 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y -CONFIG_AMBA_PL08X=y CONFIG_STAGING=y -CONFIG_IIO=y CONFIG_LPC32XX_ADC=y +CONFIG_MAX517=y +CONFIG_IIO=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -159,7 +174,6 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_WBUF_VERIFY=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig new file mode 100644 index 00000000000..2e86b31c33c --- /dev/null +++ b/arch/arm/configs/mvebu_defconfig @@ -0,0 +1,46 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370_XP=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 5406c23a02e..ccdb6357fb7 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -28,6 +28,7 @@ CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y CONFIG_MACH_M28EVK=y +CONFIG_MACH_APX4DEVKIT=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -58,6 +59,9 @@ CONFIG_CAN_FLEXCAN=m CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_BLK_DEV is not set +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ENC28J60=y @@ -77,6 +81,7 @@ CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_DEVKMEM is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MXS_AUART=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,8 +114,10 @@ CONFIG_MMC=y CONFIG_MMC_MXS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_STMP=y CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y +CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9854ff4279e..b152de79fd9 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -197,6 +196,7 @@ CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_SOC_OMAP5=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig new file mode 100644 index 00000000000..0ac1293dba1 --- /dev/null +++ b/arch/arm/configs/socfpga_defconfig @@ -0,0 +1,83 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CPUSETS=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SOCFPGA=y +CONFIG_MACH_SOCFPGA_CYCLONE5=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_VMSPLIT_2G=y +CONFIG_NR_CPUS=2 +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_DW=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_NTFS_RW=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_INFO=y +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_DEBUG_USER=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 1198dd61c7c..db2245353f0 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,4 +1,6 @@ CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -25,14 +27,9 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_MACH_HARMONY=y -CONFIG_MACH_KAEN=y CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y -CONFIG_MACH_WARIO=y -CONFIG_MACH_VENTANA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -103,19 +100,25 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y +CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TPS6586X=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS6586X=y +CONFIG_REGULATOR_TPS65910=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set @@ -126,6 +129,7 @@ CONFIG_SND=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_WM8753=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index ed2e95d46e2..62e75475e57 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -1,7 +1,10 @@ #ifndef __ASMARM_ARCH_TIMER_H #define __ASMARM_ARCH_TIMER_H +#include <asm/errno.h> + #ifdef CONFIG_ARM_ARCH_TIMER +#define ARCH_HAS_READ_CURRENT_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); #else diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index b2deda18154..dc6145120de 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -6,9 +6,22 @@ #ifndef __ASM_ARM_DELAY_H #define __ASM_ARM_DELAY_H +#include <asm/memory.h> #include <asm/param.h> /* HZ */ -extern void __delay(int loops); +#define MAX_UDELAY_MS 2 +#define UDELAY_MULT ((UL(2199023) * HZ) >> 11) +#define UDELAY_SHIFT 30 + +#ifndef __ASSEMBLY__ + +extern struct arm_delay_ops { + void (*delay)(unsigned long); + void (*const_udelay)(unsigned long); + void (*udelay)(unsigned long); +} arm_delay_ops; + +#define __delay(n) arm_delay_ops.delay(n) /* * This function intentionally does not exist; if you see references to @@ -23,22 +36,27 @@ extern void __bad_udelay(void); * division by multiplication: you don't have to worry about * loss of precision. * - * Use only for very small delays ( < 1 msec). Should probably use a + * Use only for very small delays ( < 2 msec). Should probably use a * lookup table, really, as the multiplications take much too long with * short delays. This is a "reasonable" implementation, though (and the * first constant multiplications gets optimized away if the delay is * a constant) */ -extern void __udelay(unsigned long usecs); -extern void __const_udelay(unsigned long); - -#define MAX_UDELAY_MS 2 +#define __udelay(n) arm_delay_ops.udelay(n) +#define __const_udelay(n) arm_delay_ops.const_udelay(n) #define udelay(n) \ (__builtin_constant_p(n) ? \ ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * ((2199023U*HZ)>>11))) : \ + __const_udelay((n) * UDELAY_MULT)) : \ __udelay(n)) +/* Loop-based definitions for assembly code. */ +extern void __loop_delay(unsigned long loops); +extern void __loop_udelay(unsigned long usecs); +extern void __loop_const_udelay(unsigned long); + +#endif /* __ASSEMBLY__ */ + #endif /* defined(_ARM_DELAY_H) */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index bbef15d0489..2ae842df455 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -186,17 +186,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs); -#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL) - -static inline int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, - size_t size, struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = get_dma_ops(dev); - BUG_ON(!ops); - return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs); -} - static inline void *dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { @@ -213,20 +202,12 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } -static inline int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, size_t size) -{ - DEFINE_DMA_ATTRS(attrs); - dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs); - return dma_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, &attrs); -} - /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. */ -extern void __init init_consistent_dma_size(unsigned long size); +static inline void init_consistent_dma_size(unsigned long size) { } /* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" @@ -280,6 +261,9 @@ extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int, enum dma_data_direction); +extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs); #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index e51b1e81df0..83eb2f77291 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -4,30 +4,6 @@ /* * This is the "bare minimum". AIO seems to require this. */ -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_L1_CACHE, - KM_L2_CACHE, - KM_KDB, - KM_TYPE_NR -}; - -#ifdef CONFIG_DEBUG_HIGHMEM -#define KM_NMI (-1) -#define KM_NMI_PTE (-1) -#define KM_IRQ_PTE (-1) -#endif +#define KM_TYPE_NR 16 #endif diff --git a/arch/arm/include/asm/locks.h b/arch/arm/include/asm/locks.h deleted file mode 100644 index ef4c897772d..00000000000 --- a/arch/arm/include/asm/locks.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * arch/arm/include/asm/locks.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Interrupt safe locking assembler. - */ -#ifndef __ASM_PROC_LOCKS_H -#define __ASM_PROC_LOCKS_H - -#if __LINUX_ARM_ARCH__ >= 6 - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -"1: ldrex lr, [%1]\n" \ -" sub lr, lr, %2\n" \ -" strex ip, lr, [%1]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" cmp lr, #0\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#else - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%1]\n" \ -" subs lr, lr, %2\n" \ -" str lr, [%1]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#endif - -#endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index febe495d0c6..15cb035309f 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -17,7 +17,7 @@ struct seq_file; /* * This is internal. Do not use it. */ -extern void init_FIQ(void); +extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index fcb575747e5..e965f1b560f 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -16,7 +16,7 @@ #include <linux/compiler.h> #include <linux/const.h> #include <linux/types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #ifdef CONFIG_NEED_MACH_MEMORY_H #include <mach/memory.h> diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 00cbe10a50e..e074948d814 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,21 +12,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* ARM perf PMU IDs for use by internal perf clients. */ -enum arm_perf_pmu_ids { - ARM_PERF_PMU_ID_XSCALE1 = 0, - ARM_PERF_PMU_ID_XSCALE2, - ARM_PERF_PMU_ID_V6, - ARM_PERF_PMU_ID_V6MP, - ARM_PERF_PMU_ID_CA8, - ARM_PERF_PMU_ID_CA9, - ARM_PERF_PMU_ID_CA5, - ARM_PERF_PMU_ID_CA15, - ARM_PERF_PMU_ID_CA7, - ARM_NUM_PMU_IDS, -}; - -extern enum arm_perf_pmu_ids -armpmu_get_pmu_id(void); +/* Nothing to see here... */ #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 90114faa9f3..4432305f4a2 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -103,10 +103,9 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; - enum arm_perf_pmu_ids id; enum arm_pmu_type type; cpumask_t active_irqs; - const char *name; + char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct hw_perf_event *evt, int idx); void (*disable)(struct hw_perf_event *evt, int idx); diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 65fa3c88095..b4ca707d0a6 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -59,18 +59,13 @@ static inline void dsb_sev(void) } /* - * ARMv6 Spin-locking. + * ARMv6 ticket-based spin-locking. * - * We exclusively read the old value. If it is zero, we may have - * won the lock, so we try exclusively storing it. A memory barrier - * is required after we get a lock, and before we release it, because - * V6 CPUs are assumed to have weakly ordered memory. - * - * Unlocked value: 0 - * Locked value: 1 + * A memory barrier is required after we get a lock, and before we + * release it, because V6 CPUs are assumed to have weakly ordered + * memory. */ -#define arch_spin_is_locked(x) ((x)->lock != 0) #define arch_spin_unlock_wait(lock) \ do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) @@ -79,31 +74,39 @@ static inline void dsb_sev(void) static inline void arch_spin_lock(arch_spinlock_t *lock) { unsigned long tmp; + u32 newval; + arch_spinlock_t lockval; __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" - WFE("ne") -" strexeq %0, %2, [%1]\n" -" teqeq %0, #0\n" +"1: ldrex %0, [%3]\n" +" add %1, %0, %4\n" +" strex %2, %1, [%3]\n" +" teq %2, #0\n" " bne 1b" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) + : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) + : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); + while (lockval.tickets.next != lockval.tickets.owner) { + wfe(); + lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); + } + smp_mb(); } static inline int arch_spin_trylock(arch_spinlock_t *lock) { unsigned long tmp; + u32 slock; __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) +" ldrex %0, [%2]\n" +" subs %1, %0, %0, ror #16\n" +" addeq %0, %0, %3\n" +" strexeq %1, %0, [%2]" + : "=&r" (slock), "=&r" (tmp) + : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); if (tmp == 0) { @@ -116,17 +119,38 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { + unsigned long tmp; + u32 slock; + smp_mb(); __asm__ __volatile__( -" str %1, [%0]\n" - : - : "r" (&lock->lock), "r" (0) +" mov %1, #1\n" +"1: ldrex %0, [%2]\n" +" uadd16 %0, %0, %1\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (slock), "=&r" (tmp) + : "r" (&lock->slock) : "cc"); dsb_sev(); } +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); + return tickets.owner != tickets.next; +} + +static inline int arch_spin_is_contended(arch_spinlock_t *lock) +{ + struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); + return (tickets.next - tickets.owner) > 1; +} +#define arch_spin_is_contended arch_spin_is_contended + /* * RWLOCKS * @@ -158,7 +182,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw) unsigned long tmp; __asm__ __volatile__( -"1: ldrex %0, [%1]\n" +" ldrex %0, [%1]\n" " teq %0, #0\n" " strexeq %0, %2, [%1]" : "=&r" (tmp) @@ -244,7 +268,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw) unsigned long tmp, tmp2 = 1; __asm__ __volatile__( -"1: ldrex %0, [%2]\n" +" ldrex %0, [%2]\n" " adds %0, %0, #1\n" " strexpl %1, %0, [%2]\n" : "=&r" (tmp), "+r" (tmp2) diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h index d14d197ae04..b262d2f8b47 100644 --- a/arch/arm/include/asm/spinlock_types.h +++ b/arch/arm/include/asm/spinlock_types.h @@ -5,11 +5,24 @@ # error "please don't include this file directly" #endif +#define TICKET_SHIFT 16 + typedef struct { - volatile unsigned int lock; + union { + u32 slock; + struct __raw_tickets { +#ifdef __ARMEB__ + u16 next; + u16 owner; +#else + u16 owner; + u16 next; +#endif + } tickets; + }; } arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } } typedef struct { volatile unsigned int lock; diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 3be8de3adab..ce119442277 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,13 +12,15 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H +#include <asm/arch_timer.h> #include <mach/timex.h> typedef unsigned long cycles_t; -static inline cycles_t get_cycles (void) -{ - return 0; -} +#ifdef ARCH_HAS_READ_CURRENT_TIMER +#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) +#else +#define get_cycles() (0) +#endif #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 71f6536d17a..479a6352e0b 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -189,6 +189,9 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type,addr,size) (__range_ok(addr,size) == 0) +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + /* * The "__xxx" versions of the user access functions do not verify the * address space - it must have been done previously with a separate @@ -398,9 +401,6 @@ extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned l #define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) #endif -extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __must_check __strnlen_user(const char __user *s, long n); - static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_READ, from, n)) @@ -427,24 +427,9 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo return n; } -static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __strncpy_from_user(dst, src, count); - return res; -} - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) +extern long strncpy_from_user(char *dest, const char __user *src, long count); -static inline long __must_check strnlen_user(const char __user *s, long n) -{ - unsigned long res = 0; - - if (__addr_ok(s)) - res = __strnlen_user(s, n); - - return res; -} +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); #endif /* _ASMARM_UACCESS_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 512cd147345..0cab47d4a83 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -446,7 +446,6 @@ #ifdef __KERNEL__ -#define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h new file mode 100644 index 00000000000..4d52f92967a --- /dev/null +++ b/arch/arm/include/asm/word-at-a-time.h @@ -0,0 +1,96 @@ +#ifndef __ASM_ARM_WORD_AT_A_TIME_H +#define __ASM_ARM_WORD_AT_A_TIME_H + +#ifndef __ARMEB__ + +/* + * Little-endian word-at-a-time zero byte handling. + * Heavily based on the x86 algorithm. + */ +#include <linux/kernel.h> + +struct word_at_a_time { + const unsigned long one_bits, high_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) } + +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, + const struct word_at_a_time *c) +{ + unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits; + *bits = mask; + return mask; +} + +#define prep_zero_mask(a, bits, c) (bits) + +static inline unsigned long create_zero_mask(unsigned long bits) +{ + bits = (bits - 1) & ~bits; + return bits >> 7; +} + +static inline unsigned long find_zero(unsigned long mask) +{ + unsigned long ret; + +#if __LINUX_ARM_ARCH__ >= 5 + /* We have clz available. */ + ret = fls(mask) >> 3; +#else + /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */ + ret = (0x0ff0001 + mask) >> 23; + /* Fix the 1 for 00 case */ + ret &= mask; +#endif + + return ret; +} + +#ifdef CONFIG_DCACHE_WORD_ACCESS + +#define zero_bytemask(mask) (mask) + +/* + * Load an unaligned word from kernel space. + * + * In the (very unlikely) case of the word being a page-crosser + * and the next page not being mapped, take the exception and + * return zeroes in the non-existing part. + */ +static inline unsigned long load_unaligned_zeropad(const void *addr) +{ + unsigned long ret, offset; + + /* Load word from unaligned pointer addr */ + asm( + "1: ldr %0, [%2]\n" + "2:\n" + " .pushsection .fixup,\"ax\"\n" + " .align 2\n" + "3: and %1, %2, #0x3\n" + " bic %2, %2, #0x3\n" + " ldr %0, [%2]\n" + " lsl %1, %1, #0x3\n" + " lsr %0, %0, %1\n" + " b 2b\n" + " .popsection\n" + " .pushsection __ex_table,\"a\"\n" + " .align 3\n" + " .long 1b, 3b\n" + " .popsection" + : "=&r" (ret), "=&r" (offset) + : "r" (addr), "Qo" (*(unsigned long *)addr)); + + return ret; +} + + +#endif /* DCACHE_WORD_ACCESS */ + +#else /* __ARMEB__ */ +#include <asm-generic/word-at-a-time.h> +#endif + +#endif /* __ASM_ARM_WORD_AT_A_TIME_H */ diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index dd58035621f..cf258807160 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -32,6 +32,8 @@ static int arch_timer_ppi2; static struct clock_event_device __percpu **arch_timer_evt; +extern void init_current_timer_delay(unsigned long freq); + /* * Architected system timer support. */ @@ -137,7 +139,7 @@ static int __cpuinit arch_timer_setup(struct clock_event_device *clk) /* Be safe... */ arch_timer_disable(); - clk->features = CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; clk->set_mode = arch_timer_set_mode; @@ -223,6 +225,14 @@ static cycle_t arch_counter_read(struct clocksource *cs) return arch_counter_get_cntpct(); } +int read_current_timer(unsigned long *timer_val) +{ + if (!arch_timer_rate) + return -ENXIO; + *timer_val = arch_counter_get_cntpct(); + return 0; +} + static struct clocksource clocksource_counter = { .name = "arch_sys_counter", .rating = 400, @@ -296,6 +306,7 @@ static int __init arch_timer_register(void) if (err) goto out_free_irq; + init_current_timer_delay(arch_timer_rate); return 0; out_free_irq: diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index b57c75e0b01..60d3b738d42 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -49,8 +49,7 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); /* platform dependent support */ -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__const_udelay); +EXPORT_SYMBOL(arm_delay_ops); /* networking */ EXPORT_SYMBOL(csum_partial); @@ -87,10 +86,6 @@ EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(__memzero); - /* user mem (segment) */ -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); - #ifdef CONFIG_MMU EXPORT_SYMBOL(copy_page); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 25552508c3f..2b2f25e7fef 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -253,7 +253,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void __init pci_fixup_it8152(struct pci_dev *dev) +static void __devinit pci_fixup_it8152(struct pci_dev *dev) { int i; /* fixup for ITE 8152 devices */ @@ -461,7 +461,7 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) if (!sys->bus) panic("PCI: unable to scan bus!"); - busnr = sys->bus->subordinate + 1; + busnr = sys->bus->busn_res.end + 1; list_add(&sys->node, head); } else { diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 4afed88d250..49d9f930524 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -95,13 +95,7 @@ ENDPROC(ret_to_user) ENTRY(ret_from_fork) bl schedule_tail get_thread_info tsk - ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing mov why, #1 - tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls? - beq ret_slow_syscall - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - bl syscall_trace b ret_slow_syscall ENDPROC(ret_from_fork) @@ -448,10 +442,9 @@ ENDPROC(vector_swi) * context switches, and waiting for our parent to respond. */ __sys_trace: - mov r2, scno - add r1, sp, #S_OFF - mov r0, #0 @ trace entry [IP = 0] - bl syscall_trace + mov r1, scno + add r0, sp, #S_OFF + bl syscall_trace_enter adr lr, BSYM(__sys_trace_return) @ return address mov scno, r0 @ syscall number (possibly new) @@ -463,10 +456,9 @@ __sys_trace: __sys_trace_return: str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 - mov r2, scno - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - bl syscall_trace + mov r1, scno + mov r0, sp + bl syscall_trace_exit b ret_slow_syscall .align 5 diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index c32f8456aa0..2adda11f712 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -122,14 +122,16 @@ void release_fiq(struct fiq_handler *f) while (current_fiq->fiq_op(current_fiq->dev_id, 0)); } +static int fiq_start; + void enable_fiq(int fiq) { - enable_irq(fiq + FIQ_START); + enable_irq(fiq + fiq_start); } void disable_fiq(int fiq) { - disable_irq(fiq + FIQ_START); + disable_irq(fiq + fiq_start); } EXPORT_SYMBOL(set_fiq_handler); @@ -140,7 +142,8 @@ EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); EXPORT_SYMBOL(disable_fiq); -void __init init_FIQ(void) +void __init init_FIQ(int start) { no_fiq_insn = *(unsigned long *)0xffff001c; + fiq_start = start; } diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 835898e7d70..3db960e20cb 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -55,14 +55,6 @@ add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm -#ifdef CONFIG_XIP_KERNEL -#define KERNEL_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) -#define KERNEL_END _edata_loc -#else -#define KERNEL_START KERNEL_RAM_VADDR -#define KERNEL_END _end -#endif - /* * Kernel startup entry point. * --------------------------- @@ -218,51 +210,46 @@ __create_page_tables: blo 1b /* - * Now setup the pagetables for our kernel direct - * mapped region. + * Map our RAM from the start to the end of the kernel .bss section. */ - mov r3, pc - mov r3, r3, lsr #SECTION_SHIFT - orr r3, r7, r3, lsl #SECTION_SHIFT - add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) - str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! - ldr r6, =(KERNEL_END - 1) - add r0, r0, #1 << PMD_ORDER + add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER) + ldr r6, =(_end - 1) + orr r3, r8, r7 add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) -1: cmp r0, r6 +1: str r3, [r0], #1 << PMD_ORDER add r3, r3, #1 << SECTION_SHIFT - strls r3, [r0], #1 << PMD_ORDER + cmp r0, r6 bls 1b #ifdef CONFIG_XIP_KERNEL /* - * Map some ram to cover our .data and .bss areas. + * Map the kernel image separately as it is not located in RAM. */ - add r3, r8, #TEXT_OFFSET - orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! - ldr r6, =(_end - 1) - add r0, r0, #4 +#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + mov r3, pc + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! + ldr r6, =(_edata_loc - 1) + add r0, r0, #1 << PMD_ORDER add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #endif /* - * Then map boot params address in r2 or the first 1MB (2MB with LPAE) - * of ram if boot params address is not specified. + * Then map boot params address in r2 if specified. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT - moveq r0, r8 - sub r3, r0, r8 - add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) - orr r6, r7, r0 - str r6, [r3] + subne r3, r0, r8 + addne r3, r3, #PAGE_OFFSET + addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) + orrne r6, r7, r0 + strne r6, [r3] #ifdef CONFIG_DEBUG_LL #if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8349d4e97e2..16cedb42c0c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -40,13 +40,6 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -/* - * No architecture-specific irq_finish function defined in arm/arch/irqs.h. - */ -#ifndef irq_finish -#define irq_finish(irq) do { } while (0) -#endif - unsigned long irq_err_count; int arch_show_interrupts(struct seq_file *p, int prec) @@ -85,9 +78,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs) generic_handle_irq(irq); } - /* AT91 specific workaround */ - irq_finish(irq); - irq_exit(); set_irq_regs(old_regs); } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index a02eada3aa5..ab243b87118 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -47,17 +47,14 @@ static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); /* Set at runtime when we know what CPU type we are. */ static struct arm_pmu *cpu_pmu; -enum arm_perf_pmu_ids -armpmu_get_pmu_id(void) +const char *perf_pmu_name(void) { - int id = -ENODEV; - - if (cpu_pmu != NULL) - id = cpu_pmu->id; + if (!cpu_pmu) + return NULL; - return id; + return cpu_pmu->pmu.name; } -EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); +EXPORT_SYMBOL_GPL(perf_pmu_name); int perf_num_counters(void) { @@ -760,7 +757,7 @@ init_hw_perf_events(void) cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); register_cpu_notifier(&pmu_cpu_notifier); - armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); + armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index ab627a740fa..c90fcb2b696 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -650,7 +650,6 @@ static int armv6_map_event(struct perf_event *event) } static struct arm_pmu armv6pmu = { - .id = ARM_PERF_PMU_ID_V6, .name = "v6", .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, @@ -685,7 +684,6 @@ static int armv6mpcore_map_event(struct perf_event *event) } static struct arm_pmu armv6mpcore_pmu = { - .id = ARM_PERF_PMU_ID_V6MP, .name = "v6mpcore", .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index d3c53606816..f04070bd218 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1258,7 +1258,6 @@ static u32 __init armv7_read_num_pmnc_events(void) static struct arm_pmu *__init armv7_a8_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA8; armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.map_event = armv7_a8_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1267,7 +1266,6 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void) static struct arm_pmu *__init armv7_a9_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA9; armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.map_event = armv7_a9_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1276,7 +1274,6 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void) static struct arm_pmu *__init armv7_a5_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA5; armv7pmu.name = "ARMv7 Cortex-A5"; armv7pmu.map_event = armv7_a5_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1285,7 +1282,6 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void) static struct arm_pmu *__init armv7_a15_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA15; armv7pmu.name = "ARMv7 Cortex-A15"; armv7pmu.map_event = armv7_a15_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1295,7 +1291,6 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) static struct arm_pmu *__init armv7_a7_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA7; armv7pmu.name = "ARMv7 Cortex-A7"; armv7pmu.map_event = armv7_a7_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index e34e7254e65..f759fe0bab6 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -435,7 +435,6 @@ static int xscale_map_event(struct perf_event *event) } static struct arm_pmu xscale1pmu = { - .id = ARM_PERF_PMU_ID_XSCALE1, .name = "xscale1", .handle_irq = xscale1pmu_handle_irq, .enable = xscale1pmu_enable_event, @@ -803,7 +802,6 @@ xscale2pmu_write_counter(int counter, u32 val) } static struct arm_pmu xscale2pmu = { - .id = ARM_PERF_PMU_ID_XSCALE2, .name = "xscale2", .handle_irq = xscale2pmu_handle_irq, .enable = xscale2pmu_enable_event, diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 14e38261cd3..dab711e6e1c 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -907,16 +907,16 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) +enum ptrace_syscall_dir { + PTRACE_SYSCALL_ENTER = 0, + PTRACE_SYSCALL_EXIT, +}; + +static int ptrace_syscall_trace(struct pt_regs *regs, int scno, + enum ptrace_syscall_dir dir) { unsigned long ip; - if (why) - audit_syscall_exit(regs); - else - audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, - regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; @@ -927,14 +927,28 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) * IP = 0 -> entry, =1 -> exit */ ip = regs->ARM_ip; - regs->ARM_ip = why; + regs->ARM_ip = dir; - if (why) + if (dir == PTRACE_SYSCALL_EXIT) tracehook_report_syscall_exit(regs, 0); else if (tracehook_report_syscall_entry(regs)) current_thread_info()->syscall = -1; regs->ARM_ip = ip; - return current_thread_info()->syscall; } + +asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) +{ + int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, + regs->ARM_r2, regs->ARM_r3); + return ret; +} + +asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) +{ + int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + audit_syscall_exit(regs); + return ret; +} diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 8200deaa14f..198b08456e9 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -17,11 +17,190 @@ #include <linux/percpu.h> #include <linux/node.h> #include <linux/nodemask.h> +#include <linux/of.h> #include <linux/sched.h> +#include <linux/slab.h> #include <asm/cputype.h> #include <asm/topology.h> +/* + * cpu power scale management + */ + +/* + * cpu power table + * This per cpu data structure describes the relative capacity of each core. + * On a heteregenous system, cores don't have the same computation capacity + * and we reflect that difference in the cpu_power field so the scheduler can + * take this difference into account during load balance. A per cpu structure + * is preferred because each CPU updates its own cpu_power field during the + * load balance except for idle cores. One idle core is selected to run the + * rebalance_domains for all idle cores and the cpu_power can be updated + * during this sequence. + */ +static DEFINE_PER_CPU(unsigned long, cpu_scale); + +unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu) +{ + return per_cpu(cpu_scale, cpu); +} + +static void set_power_scale(unsigned int cpu, unsigned long power) +{ + per_cpu(cpu_scale, cpu) = power; +} + +#ifdef CONFIG_OF +struct cpu_efficiency { + const char *compatible; + unsigned long efficiency; +}; + +/* + * Table of relative efficiency of each processors + * The efficiency value must fit in 20bit and the final + * cpu_scale value must be in the range + * 0 < cpu_scale < 3*SCHED_POWER_SCALE/2 + * in order to return at most 1 when DIV_ROUND_CLOSEST + * is used to compute the capacity of a CPU. + * Processors that are not defined in the table, + * use the default SCHED_POWER_SCALE value for cpu_scale. + */ +struct cpu_efficiency table_efficiency[] = { + {"arm,cortex-a15", 3891}, + {"arm,cortex-a7", 2048}, + {NULL, }, +}; + +struct cpu_capacity { + unsigned long hwid; + unsigned long capacity; +}; + +struct cpu_capacity *cpu_capacity; + +unsigned long middle_capacity = 1; + +/* + * Iterate all CPUs' descriptor in DT and compute the efficiency + * (as per table_efficiency). Also calculate a middle efficiency + * as close as possible to (max{eff_i} - min{eff_i}) / 2 + * This is later used to scale the cpu_power field such that an + * 'average' CPU is of middle power. Also see the comments near + * table_efficiency[] and update_cpu_power(). + */ +static void __init parse_dt_topology(void) +{ + struct cpu_efficiency *cpu_eff; + struct device_node *cn = NULL; + unsigned long min_capacity = (unsigned long)(-1); + unsigned long max_capacity = 0; + unsigned long capacity = 0; + int alloc_size, cpu = 0; + + alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); + cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT); + + while ((cn = of_find_node_by_type(cn, "cpu"))) { + const u32 *rate, *reg; + int len; + + if (cpu >= num_possible_cpus()) + break; + + for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++) + if (of_device_is_compatible(cn, cpu_eff->compatible)) + break; + + if (cpu_eff->compatible == NULL) + continue; + + rate = of_get_property(cn, "clock-frequency", &len); + if (!rate || len != 4) { + pr_err("%s missing clock-frequency property\n", + cn->full_name); + continue; + } + + reg = of_get_property(cn, "reg", &len); + if (!reg || len != 4) { + pr_err("%s missing reg property\n", cn->full_name); + continue; + } + + capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; + + /* Save min capacity of the system */ + if (capacity < min_capacity) + min_capacity = capacity; + + /* Save max capacity of the system */ + if (capacity > max_capacity) + max_capacity = capacity; + + cpu_capacity[cpu].capacity = capacity; + cpu_capacity[cpu++].hwid = be32_to_cpup(reg); + } + + if (cpu < num_possible_cpus()) + cpu_capacity[cpu].hwid = (unsigned long)(-1); + + /* If min and max capacities are equals, we bypass the update of the + * cpu_scale because all CPUs have the same capacity. Otherwise, we + * compute a middle_capacity factor that will ensure that the capacity + * of an 'average' CPU of the system will be as close as possible to + * SCHED_POWER_SCALE, which is the default value, but with the + * constraint explained near table_efficiency[]. + */ + if (min_capacity == max_capacity) + cpu_capacity[0].hwid = (unsigned long)(-1); + else if (4*max_capacity < (3*(max_capacity + min_capacity))) + middle_capacity = (min_capacity + max_capacity) + >> (SCHED_POWER_SHIFT+1); + else + middle_capacity = ((max_capacity / 3) + >> (SCHED_POWER_SHIFT-1)) + 1; + +} + +/* + * Look for a customed capacity of a CPU in the cpu_capacity table during the + * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the + * function returns directly for SMP system. + */ +void update_cpu_power(unsigned int cpu, unsigned long hwid) +{ + unsigned int idx = 0; + + /* look for the cpu's hwid in the cpu capacity table */ + for (idx = 0; idx < num_possible_cpus(); idx++) { + if (cpu_capacity[idx].hwid == hwid) + break; + + if (cpu_capacity[idx].hwid == -1) + return; + } + + if (idx == num_possible_cpus()) + return; + + set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity); + + printk(KERN_INFO "CPU%u: update cpu_power %lu\n", + cpu, arch_scale_freq_power(NULL, cpu)); +} + +#else +static inline void parse_dt_topology(void) {} +static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} +#endif + + +/* + * cpu topology management + */ + #define MPIDR_SMP_BITMASK (0x3 << 30) #define MPIDR_SMP_VALUE (0x2 << 30) @@ -31,6 +210,7 @@ * These masks reflect the current use of the affinity levels. * The affinity level can be up to 16 bits according to ARM ARM */ +#define MPIDR_HWID_BITMASK 0xFFFFFF #define MPIDR_LEVEL0_MASK 0x3 #define MPIDR_LEVEL0_SHIFT 0 @@ -41,6 +221,9 @@ #define MPIDR_LEVEL2_MASK 0xFF #define MPIDR_LEVEL2_SHIFT 16 +/* + * cpu topology table + */ struct cputopo_arm cpu_topology[NR_CPUS]; const struct cpumask *cpu_coregroup_mask(int cpu) @@ -48,6 +231,32 @@ const struct cpumask *cpu_coregroup_mask(int cpu) return &cpu_topology[cpu].core_sibling; } +void update_siblings_masks(unsigned int cpuid) +{ + struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; + int cpu; + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id != cpu_topo->socket_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id != cpu_topo->core_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling); + } + smp_wmb(); +} + /* * store_cpu_topology is called at boot when only one cpu is running * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, @@ -57,7 +266,6 @@ void store_cpu_topology(unsigned int cpuid) { struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; unsigned int mpidr; - unsigned int cpu; /* If the cpu topology has been already set, just return */ if (cpuid_topo->core_id != -1) @@ -99,26 +307,9 @@ void store_cpu_topology(unsigned int cpuid) cpuid_topo->socket_id = -1; } - /* update core and thread sibling masks */ - for_each_possible_cpu(cpu) { - struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; - - if (cpuid_topo->socket_id == cpu_topo->socket_id) { - cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); - if (cpu != cpuid) - cpumask_set_cpu(cpu, - &cpuid_topo->core_sibling); - - if (cpuid_topo->core_id == cpu_topo->core_id) { - cpumask_set_cpu(cpuid, - &cpu_topo->thread_sibling); - if (cpu != cpuid) - cpumask_set_cpu(cpu, - &cpuid_topo->thread_sibling); - } - } - } - smp_wmb(); + update_siblings_masks(cpuid); + + update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK); printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, @@ -134,7 +325,7 @@ void init_cpu_topology(void) { unsigned int cpu; - /* init core mask */ + /* init core mask and power*/ for_each_possible_cpu(cpu) { struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); @@ -143,6 +334,10 @@ void init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); + + set_power_scale(cpu, SCHED_POWER_SCALE); } smp_wmb(); + + parse_dt_topology(); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c7cae6b9a4d..7978d4f0f3a 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -233,9 +233,9 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) #define S_ISA " ARM" #endif -static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs) +static int __die(const char *str, int err, struct pt_regs *regs) { - struct task_struct *tsk = thread->task; + struct task_struct *tsk = current; static int die_counter; int ret; @@ -245,12 +245,12 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt /* trap and error numbers are mostly meaningless on ARM */ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV); if (ret == NOTIFY_STOP) - return ret; + return 1; print_modules(); __show_regs(regs); printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", - TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1); + TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), end_of_stack(tsk)); if (!user_mode(regs) || in_interrupt()) { dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp, @@ -259,45 +259,77 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt dump_instr(KERN_EMERG, regs); } - return ret; + return 0; } -static DEFINE_RAW_SPINLOCK(die_lock); +static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int die_owner = -1; +static unsigned int die_nest_count; -/* - * This function is protected against re-entrancy. - */ -void die(const char *str, struct pt_regs *regs, int err) +static unsigned long oops_begin(void) { - struct thread_info *thread = current_thread_info(); - int ret; - enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; + int cpu; + unsigned long flags; oops_enter(); - raw_spin_lock_irq(&die_lock); + /* racy, but better than risking deadlock. */ + raw_local_irq_save(flags); + cpu = smp_processor_id(); + if (!arch_spin_trylock(&die_lock)) { + if (cpu == die_owner) + /* nested oops. should stop eventually */; + else + arch_spin_lock(&die_lock); + } + die_nest_count++; + die_owner = cpu; console_verbose(); bust_spinlocks(1); - if (!user_mode(regs)) - bug_type = report_bug(regs->ARM_pc, regs); - if (bug_type != BUG_TRAP_TYPE_NONE) - str = "Oops - BUG"; - ret = __die(str, err, thread, regs); + return flags; +} - if (regs && kexec_should_crash(thread->task)) +static void oops_end(unsigned long flags, struct pt_regs *regs, int signr) +{ + if (regs && kexec_should_crash(current)) crash_kexec(regs); bust_spinlocks(0); + die_owner = -1; add_taint(TAINT_DIE); - raw_spin_unlock_irq(&die_lock); + die_nest_count--; + if (!die_nest_count) + /* Nest count reaches zero, release the lock. */ + arch_spin_unlock(&die_lock); + raw_local_irq_restore(flags); oops_exit(); if (in_interrupt()) panic("Fatal exception in interrupt"); if (panic_on_oops) panic("Fatal exception"); - if (ret != NOTIFY_STOP) - do_exit(SIGSEGV); + if (signr) + do_exit(signr); +} + +/* + * This function is protected against re-entrancy. + */ +void die(const char *str, struct pt_regs *regs, int err) +{ + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; + unsigned long flags = oops_begin(); + int sig = SIGSEGV; + + if (!user_mode(regs)) + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; + + if (__die(str, err, regs)) + sig = 0; + + oops_end(flags, regs, sig); } void arm_notify_die(const char *str, struct pt_regs *regs, diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 992769ae259..2473fd1fd51 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -6,9 +6,8 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ - delay.o findbit.o memchr.o memcpy.o \ + delay.o delay-loop.o findbit.o memchr.o memcpy.o \ memmove.o memset.o memzero.o setbit.o \ - strncpy_from_user.o strnlen_user.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay-loop.S index 3c9a05c8d20..36b668d8e12 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay-loop.S @@ -9,11 +9,11 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/param.h> +#include <asm/delay.h> .text .LC0: .word loops_per_jiffy -.LC1: .word (2199023*HZ)>>11 +.LC1: .word UDELAY_MULT /* * r0 <= 2000 @@ -21,10 +21,10 @@ * HZ <= 1000 */ -ENTRY(__udelay) +ENTRY(__loop_udelay) ldr r2, .LC1 mul r0, r2, r0 -ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 +ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 mov r1, #-1 ldr r2, .LC0 ldr r2, [r2] @ max = 0x01ffffff @@ -39,12 +39,10 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 /* * loops = r0 * HZ * loops_per_jiffy / 1000000 - * - * Oh, if only we had a cycle counter... */ @ Delay routine -ENTRY(__delay) +ENTRY(__loop_delay) subs r0, r0, #1 #if 0 movls pc, lr @@ -62,8 +60,8 @@ ENTRY(__delay) movls pc, lr subs r0, r0, #1 #endif - bhi __delay + bhi __loop_delay mov pc, lr -ENDPROC(__udelay) -ENDPROC(__const_udelay) -ENDPROC(__delay) +ENDPROC(__loop_udelay) +ENDPROC(__loop_const_udelay) +ENDPROC(__loop_delay) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c new file mode 100644 index 00000000000..d6dacc69254 --- /dev/null +++ b/arch/arm/lib/delay.c @@ -0,0 +1,71 @@ +/* + * Delay loops based on the OpenRISC implementation. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/timex.h> + +/* + * Default to the loop-based delay implementation. + */ +struct arm_delay_ops arm_delay_ops = { + .delay = __loop_delay, + .const_udelay = __loop_const_udelay, + .udelay = __loop_udelay, +}; + +#ifdef ARCH_HAS_READ_CURRENT_TIMER +static void __timer_delay(unsigned long cycles) +{ + cycles_t start = get_cycles(); + + while ((get_cycles() - start) < cycles) + cpu_relax(); +} + +static void __timer_const_udelay(unsigned long xloops) +{ + unsigned long long loops = xloops; + loops *= loops_per_jiffy; + __timer_delay(loops >> UDELAY_SHIFT); +} + +static void __timer_udelay(unsigned long usecs) +{ + __timer_const_udelay(usecs * UDELAY_MULT); +} + +void __init init_current_timer_delay(unsigned long freq) +{ + pr_info("Switching to timer-based delay loop\n"); + lpj_fine = freq / HZ; + arm_delay_ops.delay = __timer_delay; + arm_delay_ops.const_udelay = __timer_const_udelay; + arm_delay_ops.udelay = __timer_udelay; +} + +unsigned long __cpuinit calibrate_delay_is_known(void) +{ + return lpj_fine; +} +#endif diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index 1b197ea7aab..69719bad674 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -11,13 +11,14 @@ * */ #include <linux/linkage.h> +#include <linux/kern_levels.h> #include <asm/assembler.h> .text .align .Liosl_warning: - .ascii "<4>insl/outsl not implemented, called from %08lX\0" + .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0" .align /* diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S deleted file mode 100644 index f202d7bd164..00000000000 --- a/arch/arm/lib/strncpy_from_user.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/lib/strncpy_from_user.S - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* - * Copy a string from user space to kernel space. - * r0 = dst, r1 = src, r2 = byte length - * returns the number of characters copied (strlen of copied string), - * -EFAULT on exception, or "len" if we fill the whole buffer - */ -ENTRY(__strncpy_from_user) - mov ip, r1 -1: subs r2, r2, #1 - ldrusr r3, r1, 1, pl - bmi 2f - strb r3, [r0], #1 - teq r3, #0 - bne 1b - sub r1, r1, #1 @ take NUL character out of count -2: sub r0, r1, ip - mov pc, lr -ENDPROC(__strncpy_from_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r3, #0 - strb r3, [r0, #0] @ null terminate - mov r0, #-EFAULT - mov pc, lr - .popsection - diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S deleted file mode 100644 index 0ecbb459c4f..00000000000 --- a/arch/arm/lib/strnlen_user.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/lib/strnlen_user.S - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* Prototype: unsigned long __strnlen_user(const char *str, long n) - * Purpose : get length of a string in user memory - * Params : str - address of string in user memory - * Returns : length of string *including terminator* - * or zero on exception, or n + 1 if too long - */ -ENTRY(__strnlen_user) - mov r2, r0 -1: - ldrusr r3, r0, 1 - teq r3, #0 - beq 2f - subs r1, r1, #1 - bne 1b - add r0, r0, #1 -2: sub r0, r0, r2 - mov pc, lr -ENDPROC(__strnlen_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r0, #0 - mov pc, lr - .popsection diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19505c0a3f0..c8050b14e61 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -29,12 +29,16 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool select CPU_ARM926T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select AT91_SAM9_TIME select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -140,6 +144,8 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 9e84fe4f2aa..30bb7332e30 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -15,7 +15,9 @@ endif # Keep dtb files sorted alphabetically for each SoC # sam9260 +dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb # sam9263 diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 26917687fc3..6f50c672227 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index e6b7d0533dd..01fb7325fec 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -41,8 +41,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UHP, - .end = AT91RM9200_ID_UHP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UDP, - .end = AT91RM9200_ID_UDP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -145,8 +145,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_EMAC, - .end = AT91RM9200_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_MCI, - .end = AT91RM9200_ID_MCI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -488,8 +488,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TWI, - .end = AT91RM9200_ID_TWI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -532,8 +532,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SPI, - .end = AT91RM9200_ID_SPI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -598,18 +598,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC0, - .end = AT91RM9200_ID_TC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC1, - .end = AT91RM9200_ID_TC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC2, - .end = AT91RM9200_ID_TC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -628,18 +628,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC3, - .end = AT91RM9200_ID_TC3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC4, - .end = AT91RM9200_ID_TC4, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC5, - .end = AT91RM9200_ID_TC5, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -673,8 +673,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -729,8 +729,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC0, - .end = AT91RM9200_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -771,8 +771,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC1, - .end = AT91RM9200_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -813,8 +813,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC2, - .end = AT91RM9200_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -897,8 +897,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -935,8 +935,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US0, - .end = AT91RM9200_ID_US0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -984,8 +984,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US1, - .end = AT91RM9200_ID_US1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1035,8 +1035,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US2, - .end = AT91RM9200_ID_US2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1078,8 +1078,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US3, - .end = AT91RM9200_ID_US3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 2b1e438ed87..30c7f26a466 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,6 +20,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0ded951f785..7b9c2ba396e 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UHP, - .end = AT91SAM9260_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UDP, - .end = AT91SAM9260_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -149,8 +149,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_EMAC, - .end = AT91SAM9260_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -223,8 +223,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -496,8 +496,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TWI, - .end = AT91SAM9260_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -540,8 +540,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI0, - .end = AT91SAM9260_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -566,8 +566,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI1, - .end = AT91SAM9260_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -652,18 +652,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC0, - .end = AT91SAM9260_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC1, - .end = AT91SAM9260_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC2, - .end = AT91SAM9260_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -682,18 +682,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC3, - .end = AT91SAM9260_ID_TC3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC4, - .end = AT91SAM9260_ID_TC4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC5, - .end = AT91SAM9260_ID_TC5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -807,8 +807,8 @@ static struct resource ssc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SSC, - .end = AT91SAM9260_ID_SSC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, .flags = IORESOURCE_IRQ, }, }; @@ -882,8 +882,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -920,8 +920,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US0, - .end = AT91SAM9260_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -971,8 +971,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US1, - .end = AT91SAM9260_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1014,8 +1014,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US2, - .end = AT91SAM9260_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1057,8 +1057,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US3, - .end = AT91SAM9260_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, .flags = IORESOURCE_IRQ, }, }; @@ -1100,8 +1100,8 @@ static struct resource uart4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US4, - .end = AT91SAM9260_ID_US4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, .flags = IORESOURCE_IRQ, }, }; @@ -1138,8 +1138,8 @@ static struct resource uart5_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US5, - .end = AT91SAM9260_ID_US5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, .flags = IORESOURCE_IRQ, }, }; @@ -1357,8 +1357,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_ADC, - .end = AT91SAM9260_ID_ADC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c77d503d09d..f40762c5fed 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,6 +19,7 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9295e90b08f..8df5c1bdff9 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UHP, - .end = AT91SAM9261_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UDP, - .end = AT91SAM9261_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -148,8 +148,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_MCI, - .end = AT91SAM9261_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -310,8 +310,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TWI, - .end = AT91SAM9261_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -354,8 +354,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI0, - .end = AT91SAM9261_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -380,8 +380,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI1, - .end = AT91SAM9261_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_LCDC, - .end = AT91SAM9261_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, .flags = IORESOURCE_IRQ, }, #if defined(CONFIG_FB_INTSRAM) @@ -566,18 +566,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TC0, - .end = AT91SAM9261_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9261_ID_TC1, - .end = AT91SAM9261_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9261_ID_TC2, - .end = AT91SAM9261_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -689,8 +689,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC0, - .end = AT91SAM9261_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -731,8 +731,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC1, - .end = AT91SAM9261_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -773,8 +773,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC2, - .end = AT91SAM9261_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -857,8 +857,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -895,8 +895,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US0, - .end = AT91SAM9261_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -938,8 +938,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US1, - .end = AT91SAM9261_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US2, - .end = AT91SAM9261_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ed91c7e9f7c..84b38105231 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 175e0009eaa..eb6bbf86fb9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -44,8 +44,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UHP, - .end = AT91SAM9263_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -104,8 +104,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UDP, - .end = AT91SAM9263_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -155,8 +155,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_EMAC, - .end = AT91SAM9263_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -229,8 +229,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI0, - .end = AT91SAM9263_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -254,8 +254,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI1, - .end = AT91SAM9263_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -567,8 +567,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TWI, - .end = AT91SAM9263_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -611,8 +611,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI0, - .end = AT91SAM9263_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -637,8 +637,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI1, - .end = AT91SAM9263_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -725,8 +725,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_AC97C, - .end = AT91SAM9263_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -776,8 +776,8 @@ static struct resource can_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_CAN, - .end = AT91SAM9263_ID_CAN, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, .flags = IORESOURCE_IRQ, }, }; @@ -816,8 +816,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_LCDC, - .end = AT91SAM9263_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -883,8 +883,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_ISI, - .end = AT91SAM9263_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -940,8 +940,8 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TCB, - .end = AT91SAM9263_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1108,8 +1108,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_PWMC, - .end = AT91SAM9263_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1161,8 +1161,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC0, - .end = AT91SAM9263_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1203,8 +1203,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC1, - .end = AT91SAM9263_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1284,8 +1284,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1322,8 +1322,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US0, - .end = AT91SAM9263_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1365,8 +1365,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US1, - .end = AT91SAM9263_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1408,8 +1408,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US2, - .end = AT91SAM9263_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index a94758b4273..ffc0957d762 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -137,7 +137,7 @@ static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, - .irq = AT91_ID_SYS, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 4792682d52b..ef6cedd52e3 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> @@ -182,6 +183,13 @@ static struct clk adc_op_clk = { .rate_hz = 13200000, }; +/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ +static struct clk aestdessha_clk = { + .name = "aestdessha_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA, + .type = CLK_TYPE_PERIPHERAL, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -211,6 +219,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, &adc_op_clk, + &aestdessha_clk, // irq0 }; @@ -231,6 +240,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), @@ -387,7 +399,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 3, /* Ethernet */ 0, /* Image Sensor Interface */ 2, /* USB Device High speed port */ - 0, + 0, /* AESTDESSHA Crypto HW Accelerators */ 0, /* Multimedia Card Interface 1 */ 0, 0, /* Advanced Interrupt Controller (IRQ0) */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 933fc9afe7d..06073996a38 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> +#include <linux/platform_data/atmel-aes.h> #include <linux/platform_data/at91_adc.h> @@ -53,8 +54,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_DMA, - .end = AT91SAM9G45_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +95,8 @@ static struct resource usbh_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -156,8 +157,8 @@ static struct resource usbh_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -213,8 +214,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9G45_ID_UDPHS, - .end = AT91SAM9G45_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -296,8 +297,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_EMAC, - .end = AT91SAM9G45_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -370,8 +371,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI0, - .end = AT91SAM9G45_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -395,8 +396,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI1, - .end = AT91SAM9G45_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -645,8 +646,8 @@ static struct resource twi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI0, - .end = AT91SAM9G45_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -665,8 +666,8 @@ static struct resource twi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI1, - .end = AT91SAM9G45_ID_TWI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, .flags = IORESOURCE_IRQ, }, }; @@ -720,8 +721,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI0, - .end = AT91SAM9G45_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -746,8 +747,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI1, - .end = AT91SAM9G45_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -834,8 +835,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AC97C, - .end = AT91SAM9G45_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -887,8 +888,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_ISI, - .end = AT91SAM9G45_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -979,8 +980,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_LCDC, - .end = AT91SAM9G45_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -1054,8 +1055,8 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1076,8 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1110,8 +1111,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1147,8 +1148,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1197,8 +1198,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1400,8 +1401,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_PWMC, - .end = AT91SAM9G45_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1453,8 +1454,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC0, - .end = AT91SAM9G45_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1495,8 +1496,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC1, - .end = AT91SAM9G45_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1575,8 +1576,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1613,8 +1614,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US0, - .end = AT91SAM9G45_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1656,8 +1657,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US1, - .end = AT91SAM9G45_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1699,8 +1700,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US2, - .end = AT91SAM9G45_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1742,8 +1743,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US3, - .end = AT91SAM9G45_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, .flags = IORESOURCE_IRQ, }, }; @@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_add_device_serial(void) {} #endif +/* -------------------------------------------------------------------- + * SHA1/SHA256 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE) +static struct resource sha_resources[] = { + { + .start = AT91SAM9G45_BASE_SHA, + .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_sha_device = { + .name = "atmel_sha", + .id = -1, + .resource = sha_resources, + .num_resources = ARRAY_SIZE(sha_resources), +}; + +static void __init at91_add_device_sha(void) +{ + platform_device_register(&at91sam9g45_sha_device); +} +#else +static void __init at91_add_device_sha(void) {} +#endif + +/* -------------------------------------------------------------------- + * DES/TDES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE) +static struct resource tdes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TDES, + .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_tdes_device = { + .name = "atmel_tdes", + .id = -1, + .resource = tdes_resources, + .num_resources = ARRAY_SIZE(tdes_resources), +}; + +static void __init at91_add_device_tdes(void) +{ + platform_device_register(&at91sam9g45_tdes_device); +} +#else +static void __init at91_add_device_tdes(void) {} +#endif + +/* -------------------------------------------------------------------- + * AES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) +static struct aes_platform_data aes_data; +static u64 aes_dmamask = DMA_BIT_MASK(32); + +static struct resource aes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_AES, + .end = AT91SAM9G45_BASE_AES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_aes_device = { + .name = "atmel_aes", + .id = -1, + .dev = { + .dma_mask = &aes_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &aes_data, + }, + .resource = aes_resources, + .num_resources = ARRAY_SIZE(aes_resources), +}; + +static void __init at91_add_device_aes(void) +{ + struct at_dma_slave *atslave; + struct aes_dma_data *alt_atslave; + + alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL); + + /* DMA TX slave channel configuration */ + atslave = &alt_atslave->txdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | + ATC_SRC_PER(AT_DMA_ID_AES_RX); + + /* DMA RX slave channel configuration */ + atslave = &alt_atslave->rxdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | + ATC_DST_PER(AT_DMA_ID_AES_TX); + + aes_data.dma_slave = alt_atslave; + platform_device_register(&at91sam9g45_aes_device); +} +#else +static void __init at91_add_device_aes(void) {} +#endif /* -------------------------------------------------------------------- */ /* @@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void) at91_add_device_trng(); at91_add_device_watchdog(); at91_add_device_tc(); + at91_add_device_sha(); + at91_add_device_tdes(); + at91_add_device_aes(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index e420085a57e..72ce50a50de 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,6 +19,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c0b1481a9a..f09fff93217 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -41,8 +41,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_DMA, - .end = AT91SAM9RL_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -84,8 +84,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_UDPHS, - .end = AT91SAM9RL_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -172,8 +172,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_MCI, - .end = AT91SAM9RL_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -339,8 +339,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TWI0, - .end = AT91SAM9RL_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -383,8 +383,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SPI, - .end = AT91SAM9RL_ID_SPI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -452,8 +452,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_AC97C, - .end = AT91SAM9RL_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -507,8 +507,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_LCDC, - .end = AT91SAM9RL_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -574,18 +574,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TC0, - .end = AT91SAM9RL_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9RL_ID_TC1, - .end = AT91SAM9RL_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9RL_ID_TC2, - .end = AT91SAM9RL_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -621,8 +621,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TSC, - .end = AT91SAM9RL_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -768,8 +768,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_PWMC, - .end = AT91SAM9RL_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -821,8 +821,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC0, - .end = AT91SAM9RL_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -863,8 +863,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC1, - .end = AT91SAM9RL_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -943,8 +943,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US0, - .end = AT91SAM9RL_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1032,8 +1032,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US1, - .end = AT91SAM9RL_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US2, - .end = AT91SAM9RL_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1118,8 +1118,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US3, - .end = AT91SAM9RL_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 1b144b4d3ce..477cf9d0667 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -312,8 +312,6 @@ static void __init at91sam9x5_map_io(void) void __init at91sam9x5_initialize(void) { - at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); - /* Register GPIO subsystem (using DT) */ at91_gpio_init(NULL, 0); } @@ -321,47 +319,9 @@ void __init at91sam9x5_initialize(void) /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A and B */ - 1, /* Parallel IO Controller C and D */ - 4, /* Soft Modem */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 6, /* Two-Wire Interface 2 */ - 0, /* Multimedia Card Interface 0 */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* UART 0 */ - 5, /* UART 1 */ - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ - 0, /* Pulse Width Modulation Controller */ - 0, /* ADC Controller */ - 0, /* DMA Controller 0 */ - 0, /* DMA Controller 1 */ - 2, /* USB Host High Speed port */ - 2, /* USB Device High speed port */ - 3, /* Ethernet MAC 0 */ - 3, /* LDC Controller or Image Sensor Interface */ - 0, /* Multimedia Card Interface 1 */ - 3, /* Ethernet MAC 1 */ - 4, /* Synchronous Serial Interface */ - 4, /* CAN Controller 0 */ - 4, /* CAN Controller 1 */ - 0, /* Advanced Interrupt Controller (IRQ0) */ -}; struct at91_init_soc __initdata at91sam9x5_soc = { .map_io = at91sam9x5_map_io, - .default_irq_priority = at91sam9x5_default_irq_priority, .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index d62fe090d81..46090e642d8 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,10 +13,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/proc-fns.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> +#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 271f994314a..22d8856094f 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -36,6 +36,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -91,6 +92,7 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = onearm_init_early, .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b7d8aa7b81e..de7be193181 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -212,6 +213,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 29d3ef0a50f..477e708497b 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -39,6 +39,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -188,6 +189,7 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 44328a6d460..a5b002f32a6 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -158,6 +159,7 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = carmeva_init_early, .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 69951ec7dbf..ecbc13b594d 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> @@ -376,6 +377,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 895cf2dba61..2e6d043c82f 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -37,6 +37,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -178,6 +179,7 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpuat91_init_early, .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd813361cd2..462bc319cbc 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -39,6 +39,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -252,6 +253,7 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb337_init_early, .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7c8b05a57d7..872871ab116 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -133,6 +134,7 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb637_init_early, .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index a1fce05aa7a..e8f45c4e0ea 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -16,6 +16,7 @@ #include <linux/of_platform.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <asm/setup.h> #include <asm/irq.h> @@ -53,6 +54,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d2023f27c65..01f66e99ece 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" static void __init at91eb01_init_irq(void) @@ -43,6 +44,7 @@ static void __init at91eb01_init_early(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .handle_irq = at91_aic_handle_irq, .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index bd101729798..d1e1f3fc0a4 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -36,6 +36,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -118,6 +119,7 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eb9200_init_early, .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc3726a9c..9c24cb25707 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -39,6 +39,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -170,6 +171,7 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ecb_at91init_early, .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f..82bdfde3405 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -25,6 +25,7 @@ #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -132,6 +133,7 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 47658f78105..6cc83a87d77 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -160,6 +161,7 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 33411e6ecb1..69ab1247ef8 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -42,6 +42,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -262,6 +263,7 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = foxg20_init_early, .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 3e0dfa643a8..a9d5e78118c 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/gsia18s.h> #include <mach/stamp9g20.h> @@ -575,6 +576,7 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index f260657f32b..64c1dbf88a0 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,6 +35,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/cpu.h> #include "generic.h" @@ -93,6 +94,7 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kafa_init_early, .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5482b..5d96cb85175 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -37,6 +37,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -133,6 +134,7 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kb9202_init_early, .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index d2f4cc16176..18103c5d993 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -378,6 +379,7 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = neocore926_init_early, .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 7fe63834242..9ca3e32c54c 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/stamp9g20.h> @@ -218,6 +219,7 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b45c0a5d5ca..12706550450 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -120,6 +121,7 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = picotux200_init_early, .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 0c61bf0d272..bf351e28542 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -258,6 +259,7 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a471376..cc2bf979607 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -223,6 +224,7 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = dk_init_early, .init_irq = at91_init_irq_default, .init_machine = dk_board_init, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8adec4..62e19e64c9d 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -190,6 +191,7 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be7510..c3b43aefdb7 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <linux/gpio.h> @@ -225,6 +226,7 @@ MACHINE_START(RSI_EWS, "RSI EWS") /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = rsi_ews_init_early, .init_irq = at91_init_irq_default, .init_machine = rsi_ews_board_init, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2595d..7bf6da70d7d 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -202,6 +203,7 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 7b3c3913551..889c1bf71eb 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -344,6 +345,7 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453821b..2269be5fa38 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -46,6 +46,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -615,6 +616,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 983cb98d246..82adf581afc 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -443,6 +444,7 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6860d345110..4ea4ee00364 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> @@ -413,6 +414,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -422,6 +424,7 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 63163dc7df4..3d48ec15468 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -43,6 +43,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -503,6 +504,7 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index be3239f13da..e7dc3ead704 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -319,6 +320,7 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 9d446f1bb45..a4e031a039f 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -33,6 +33,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -178,6 +179,7 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index ee86f9d7ee7..29eae1626bf 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -287,6 +288,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, @@ -296,6 +298,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 95393fcaf19..c1476b9fe7b 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -358,6 +359,7 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -367,6 +369,7 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -376,6 +379,7 @@ MACHINE_START(USB_A9G20, "CALAO USB_A92G0") /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665ea4b5..516d340549d 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -44,6 +44,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -590,6 +591,7 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = yl9200_init_early, .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0a60bf83703..f4965067765 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -29,6 +29,8 @@ extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); +extern int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 325837a264c..be42cf0e74b 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -26,6 +26,8 @@ #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <asm/mach/irq.h> + #include <mach/hardware.h> #include <mach/at91_pio.h> @@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_desc_get_chip(desc); struct irq_data *idata = irq_desc_get_irq_data(desc); - struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; unsigned long isr; int n; - /* temporarily mask (level sensitive) parent IRQ */ - chip->irq_ack(idata); + chained_irq_enter(chip, desc); for (;;) { /* Reading ISR acks pending (edge triggered) GPIO interrupts. * When there none are pending, we're finished unless we need @@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } - chip->irq_unmask(idata); + chained_irq_exit(chip, desc); /* now it may re-trigger */ } diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h index 3045781c473..eaea66197fa 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -23,12 +23,23 @@ extern void __iomem *at91_aic_base; __raw_readl(at91_aic_base + field) #define at91_aic_write(field, value) \ - __raw_writel(value, at91_aic_base + field); + __raw_writel(value, at91_aic_base + field) #else .extern at91_aic_base #endif +/* Number of irq lines managed by AIC */ +#define NR_AIC_IRQS 32 +#define NR_AIC5_IRQS 128 + +#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */ +#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */ + +#define AT91_AIC_IRQ_MIN_PRIORITY 0 +#define AT91_AIC_IRQ_MAX_PRIORITY 7 + #define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ +#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */ #define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ #define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ #define AT91_AIC_SRCTYPE_LOW (0 << 5) @@ -37,29 +48,52 @@ extern void __iomem *at91_aic_base; #define AT91_AIC_SRCTYPE_RISING (3 << 5) #define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */ #define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ +#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */ #define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ +#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */ #define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ +#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */ #define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ #define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ +#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */ +#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */ +#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */ +#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */ #define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ +#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */ #define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ +#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */ #define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ #define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ #define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ +#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */ #define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ +#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */ #define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ +#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */ #define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ +#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */ #define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ +#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */ #define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ +#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */ #define AT91_AIC_DCR 0x138 /* Debug Control Register */ +#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */ #define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ #define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ #define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */ #define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */ #define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ +#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */ + +void at91_aic_handle_irq(struct pt_regs *regs); +void at91_aic5_handle_irq(struct pt_regs *regs); #endif diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h deleted file mode 100644 index 2f6ba0c5636..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h deleted file mode 100644 index a81114c11c7..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 3a4da24d591..8eba1021f53 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -136,6 +136,8 @@ #define AT_DMA_ID_SSC1_RX 8 #define AT_DMA_ID_AC97_TX 9 #define AT_DMA_ID_AC97_RX 10 +#define AT_DMA_ID_AES_TX 11 +#define AT_DMA_ID_AES_RX 12 #define AT_DMA_ID_MCI1 13 #endif diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S deleted file mode 100644 index 903bf205a33..00000000000 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/hardware.h> -#include <mach/at91_aic.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =at91_aic_base @ base virtual address of AIC peripheral - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. - .endm - diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index cfcfcbe3626..1e02c0e49dc 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/bitmap.h> #include <linux/types.h> #include <linux/irq.h> #include <linux/of.h> @@ -30,38 +31,218 @@ #include <linux/of_irq.h> #include <linux/irqdomain.h> #include <linux/err.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/setup.h> +#include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <mach/at91_aic.h> + void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; +static unsigned int n_irqs = NR_AIC_IRQS; +static unsigned long at91_aic_caps = 0; + +/* AIC5 introduces a Source Select Register */ +#define AT91_AIC_CAP_AIC5 (1 << 0) +#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) + +#ifdef CONFIG_PM + +static unsigned long *wakeups; +static unsigned long *backups; + +#define set_backup(bit) set_bit(bit, backups) +#define clear_backup(bit) clear_bit(bit, backups) + +static int at91_aic_pm_init(void) +{ + backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!backups) + return -ENOMEM; + + wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!wakeups) { + kfree(backups); + return -ENOMEM; + } + + return 0; +} + +static int at91_aic_set_wake(struct irq_data *d, unsigned value) +{ + if (unlikely(d->hwirq >= n_irqs)) + return -EINVAL; + + if (value) + set_bit(d->hwirq, wakeups); + else + clear_bit(d->hwirq, wakeups); + + return 0; +} + +void at91_irq_suspend(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable enabled irqs */ + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable wakeup irqs */ + i = 0; + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); + } +} + +void at91_irq_resume(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable wakeup irqs */ + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable irqs disabled for suspend */ + i = 0; + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); + } +} + +#else +static inline int at91_aic_pm_init(void) +{ + return 0; +} + +#define set_backup(bit) +#define clear_backup(bit) +#define at91_aic_set_wake NULL + +#endif /* CONFIG_PM */ + +asmlinkage void __exception_irq_entry +at91_aic_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC_IVR); + irqstat = at91_aic_read(AT91_AIC_ISR); + + /* + * ISR value is 0 when there is no current interrupt or when there is + * a spurious interrupt + */ + if (!irqstat) + at91_aic_write(AT91_AIC_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} + +asmlinkage void __exception_irq_entry +at91_aic5_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC5_IVR); + irqstat = at91_aic_read(AT91_AIC5_ISR); + + if (!irqstat) + at91_aic_write(AT91_AIC5_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); + /* Update ISR cache */ + clear_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) +{ + /* Disable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + /* Update ISR cache */ + clear_backup(d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); + /* Update ISR cache */ + set_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) +{ + /* Enable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + /* Update ISR cache */ + set_backup(d->hwirq); } -unsigned int at91_extern_irq; +static void at91_aic_eoi(struct irq_data *d) +{ + /* + * Mark end-of-interrupt on AIC, the controller doesn't care about + * the value written. Moreover it's a write-only register. + */ + at91_aic_write(AT91_AIC_EOICR, 0); +} + +static void __maybe_unused at91_aic5_eoi(struct irq_data *d) +{ + at91_aic_write(AT91_AIC5_EOICR, 0); +} -#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) +unsigned long *at91_extern_irq; -static int at91_aic_set_type(struct irq_data *d, unsigned type) +#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) + +static int at91_aic_compute_srctype(struct irq_data *d, unsigned type) { - unsigned int smr, srctype; + int srctype; switch (type) { case IRQ_TYPE_LEVEL_HIGH: @@ -74,65 +255,51 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else - return -EINVAL; + srctype = -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else - return -EINVAL; + srctype = -EINVAL; break; default: - return -EINVAL; + srctype = -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - return 0; + return srctype; } -#ifdef CONFIG_PM - -static u32 wakeups; -static u32 backups; - -static int at91_aic_set_wake(struct irq_data *d, unsigned value) +static int at91_aic_set_type(struct irq_data *d, unsigned type) { - if (unlikely(d->hwirq >= NR_AIC_IRQS)) - return -EINVAL; - - if (value) - wakeups |= (1 << d->hwirq); - else - wakeups &= ~(1 << d->hwirq); + unsigned int smr; + int srctype; + + srctype = at91_aic_compute_srctype(d, type); + if (srctype < 0) + return srctype; + + if (has_aic5()) { + at91_aic_write(AT91_AIC5_SSR, + d->hwirq & AT91_AIC5_INTSEL_MSK); + smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC5_SMR, smr | srctype); + } else { + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) + & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); + } return 0; } -void at91_irq_suspend(void) -{ - backups = at91_aic_read(AT91_AIC_IMR); - at91_aic_write(AT91_AIC_IDCR, backups); - at91_aic_write(AT91_AIC_IECR, wakeups); -} - -void at91_irq_resume(void) -{ - at91_aic_write(AT91_AIC_IDCR, wakeups); - at91_aic_write(AT91_AIC_IECR, backups); -} - -#else -#define at91_aic_set_wake NULL -#endif - static struct irq_chip at91_aic_chip = { .name = "AIC", - .irq_ack = at91_aic_mask_irq, .irq_mask = at91_aic_mask_irq, .irq_unmask = at91_aic_unmask_irq, .irq_set_type = at91_aic_set_type, .irq_set_wake = at91_aic_set_wake, + .irq_eoi = at91_aic_eoi, }; static void __init at91_aic_hw_init(unsigned int spu_vector) @@ -161,41 +328,172 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } +static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC5_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC5_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC5_DCR, 0); + + /* Disable and clear all interrupts initially */ + for (i = 0; i < n_irqs; i++) { + at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + at91_aic_write(AT91_AIC5_ICCR, 1); + } +} + #if defined(CONFIG_OF) +static unsigned int *at91_aic_irq_priorities; + static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { /* Put virq number in Source Vector Register */ at91_aic_write(AT91_AIC_SVR(hw), virq); - /* Active Low interrupt, without priority */ - at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC_SMR(hw), + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; } +static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); + + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC5_SVR, virq); + + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC5_SMR, + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 3)) + return -EINVAL; + if (WARN_ON(intspec[0] >= n_irqs)) + return -EINVAL; + if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) + || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) + return -EINVAL; + + *out_hwirq = intspec[0]; + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + at91_aic_irq_priorities[*out_hwirq] = intspec[2]; + + return 0; +} + static struct irq_domain_ops at91_aic_irq_ops = { .map = at91_aic_irq_map, - .xlate = irq_domain_xlate_twocell, + .xlate = at91_aic_irq_domain_xlate, }; -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) +int __init at91_aic_of_common_init(struct device_node *node, + struct device_node *parent) { + struct property *prop; + const __be32 *p; + u32 val; + + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + if (!at91_extern_irq) + return -ENOMEM; + + if (at91_aic_pm_init()) { + kfree(at91_extern_irq); + return -ENOMEM; + } + + at91_aic_irq_priorities = kzalloc(n_irqs + * sizeof(*at91_aic_irq_priorities), + GFP_KERNEL); + if (!at91_aic_irq_priorities) + return -ENOMEM; + at91_aic_base = of_iomap(node, 0); at91_aic_np = node; - at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, &at91_aic_irq_ops, NULL); if (!at91_aic_domain) panic("Unable to add AIC irq domain (DT)\n"); + of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { + if (val >= n_irqs) + pr_warn("AIC: external irq %d >= %d skip it\n", + val, n_irqs); + else + set_bit(val, at91_extern_irq); + } + irq_set_default_host(at91_aic_domain); - at91_aic_hw_init(NR_AIC_IRQS); + return 0; +} + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic_hw_init(n_irqs); + + return 0; +} + +int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + at91_aic_caps |= AT91_AIC_CAP_AIC5; + n_irqs = NR_AIC5_IRQS; + at91_aic_chip.irq_ack = at91_aic5_mask_irq; + at91_aic_chip.irq_mask = at91_aic5_mask_irq; + at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; + at91_aic_chip.irq_eoi = at91_aic5_eoi; + at91_aic_irq_ops.map = at91_aic5_irq_map; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic5_hw_init(n_irqs); return 0; } @@ -204,22 +502,25 @@ int __init at91_aic_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) +void __init at91_aic_init(unsigned int *priority) { unsigned int i; int irq_base; + if (at91_aic_pm_init()) + panic("Unable to allocate bit maps\n"); + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); /* Add irq domain for AIC */ - irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + irq_base = irq_alloc_descs(-1, 0, n_irqs, 0); if (irq_base < 0) { WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); irq_base = 0; } - at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs, irq_base, 0, &irq_domain_simple_ops, NULL); @@ -232,15 +533,14 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ - for (i = 0; i < NR_AIC_IRQS; i++) { + for (i = 0; i < n_irqs; i++) { /* Put hardware irq number in Source Vector Register: */ - at91_aic_write(AT91_AIC_SVR(i), i); + at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - - irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } - at91_aic_hw_init(NR_AIC_IRQS); + at91_aic_hw_init(n_irqs); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1bfaad62873..2c2d86505a5 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,6 +25,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index c965fd8eb31..f15293bd797 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/sched.h> -#include <linux/timex.h> #include <asm/sizes.h> #include <mach/hardware.h> @@ -188,7 +187,6 @@ static struct irqaction clps711x_timer_irq = { static void __init clps711x_timer_init(void) { - struct timespec tv; unsigned int syscon; syscon = clps_readl(SYSCON1); @@ -198,10 +196,6 @@ static void __init clps711x_timer_init(void) clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); } struct sys_timer clps711x_timer = { diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 3a032a67725..fc0e028d940 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -25,26 +25,6 @@ */ #define PLAT_PHYS_OFFSET UL(0xc0000000) -#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) -#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET) -#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - /* * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 * uses only one of the two banks (bank #1). However, even within @@ -54,23 +34,6 @@ * them, so we use 24 for the node max shift to get 16MB node sizes. */ -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 42ee8f33eaf..f266d90b9ef 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -86,17 +86,7 @@ static void __init p720t_map_io(void) iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); } -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - -static int p720t_hw_init(void) +static void __init p720t_init_early(void) { /* * Power down as much as possible in case we don't @@ -111,13 +101,19 @@ static int p720t_hw_init(void) PLD_CODEC = 0; PLD_TCH = 0; PLD_SPI = 0; -#ifndef CONFIG_DEBUG_LL - PLD_COM2 = 0; - PLD_COM1 = 0; -#endif - - return 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } } -__initcall(p720t_hw_init); - +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .fixup = fixup_p720t, + .init_early = p720t_init_early, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32d837d8eab..ab99c3c3b75 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,6 +4,7 @@ config AINTC bool config CP_INTC + select IRQ_DOMAIN bool config ARCH_DAVINCI_DMx @@ -61,7 +62,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -71,7 +71,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -105,7 +104,6 @@ config MACH_DAVINCI_DM6467_EVM default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x select MACH_DAVINCI_DM6467TEVM - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -119,7 +117,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -131,7 +128,6 @@ config MACH_DAVINCI_DA830_EVM default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -218,7 +214,6 @@ config MACH_TNETV107X config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select MISC_DEVICES select EEPROM_AT24 select I2C help diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2db78bd5c83..2227effcb0e 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -39,3 +39,4 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o +obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index f83152d643c..006dae8dfe4 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -9,9 +9,14 @@ * kind, whether express or implied. */ +#include <linux/export.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <mach/common.h> #include <mach/cp_intc.h> @@ -28,7 +33,7 @@ static inline void cp_intc_write(unsigned long value, unsigned offset) static void cp_intc_ack_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_STAT_IDX_CLR); } /* Disable interrupt */ @@ -36,20 +41,20 @@ static void cp_intc_mask_irq(struct irq_data *d) { /* XXX don't know why we need to disable nIRQ here... */ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_CLR); cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); } /* Enable interrupt */ static void cp_intc_unmask_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_SET); } static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type) { - unsigned reg = BIT_WORD(d->irq); - unsigned mask = BIT_MASK(d->irq); + unsigned reg = BIT_WORD(d->hwirq); + unsigned mask = BIT_MASK(d->hwirq); unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); @@ -99,18 +104,43 @@ static struct irq_chip cp_intc_irq_chip = { .irq_set_wake = cp_intc_set_wake, }; -void __init cp_intc_init(void) +static struct irq_domain *cp_intc_domain; + +static int cp_intc_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - unsigned long num_irq = davinci_soc_info.intc_irq_num; + pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw); + + irq_set_chip(virq, &cp_intc_irq_chip); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + irq_set_handler(virq, handle_edge_irq); + return 0; +} + +static const struct irq_domain_ops cp_intc_host_ops = { + .map = cp_intc_host_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +int __init cp_intc_of_init(struct device_node *node, struct device_node *parent) +{ + u32 num_irq = davinci_soc_info.intc_irq_num; u8 *irq_prio = davinci_soc_info.intc_irq_prios; u32 *host_map = davinci_soc_info.intc_host_map; unsigned num_reg = BITS_TO_LONGS(num_irq); - int i; + int i, irq_base; davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC; - davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + if (node) { + davinci_intc_base = of_iomap(node, 0); + if (of_property_read_u32(node, "ti,intc-size", &num_irq)) + pr_warn("unable to get intc-size, default to %d\n", + num_irq); + } else { + davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + } if (WARN_ON(!davinci_intc_base)) - return; + return -EINVAL; cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); @@ -165,13 +195,28 @@ void __init cp_intc_init(void) for (i = 0; host_map[i] != -1; i++) cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); - /* Set up genirq dispatching for cp_intc */ - for (i = 0; i < num_irq; i++) { - irq_set_chip(i, &cp_intc_irq_chip); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - irq_set_handler(i, handle_edge_irq); + irq_base = irq_alloc_descs(-1, 0, num_irq, 0); + if (irq_base < 0) { + pr_warn("Couldn't allocate IRQ numbers\n"); + irq_base = 0; + } + + /* create a legacy host */ + cp_intc_domain = irq_domain_add_legacy(node, num_irq, + irq_base, 0, &cp_intc_host_ops, NULL); + + if (!cp_intc_domain) { + pr_err("cp_intc: failed to allocate irq host!\n"); + return -EINVAL; } /* Enable global interrupt */ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); + + return 0; +} + +void __init cp_intc_init(void) +{ + cp_intc_of_init(NULL, NULL); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index d1624a315c9..783eab6845c 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -546,6 +546,7 @@ static struct lcd_ctrl_config lcd_cfg = { .sync_edge = 0, .sync_ctrl = 1, .raster_order = 0, + .fifo_th = 6, }; struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index 4e8190eed67..d13d8dfa2b0 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -52,5 +52,6 @@ #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) void __init cp_intc_init(void); +int __init cp_intc_of_init(struct device_node *, struct device_node *); #endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h deleted file mode 100644 index b9bf3d6a442..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h deleted file mode 100644 index b9bf3d6a442..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 768b3c06021..cf5f573eb5f 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -30,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c new file mode 100644 index 00000000000..00946e23c1e --- /dev/null +++ b/arch/arm/mach-davinci/pm_domain.c @@ -0,0 +1,64 @@ +/* + * Runtime PM support code for DaVinci + * + * Author: Kevin Hilman + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> +#include <linux/platform_device.h> + +#ifdef CONFIG_PM_RUNTIME +static int davinci_pm_runtime_suspend(struct device *dev) +{ + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; + + ret = pm_clk_suspend(dev); + if (ret) { + pm_generic_runtime_resume(dev); + return ret; + } + + return 0; +} + +static int davinci_pm_runtime_resume(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + pm_clk_resume(dev); + return pm_generic_runtime_resume(dev); +} +#endif + +static struct dev_pm_domain davinci_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(davinci_pm_runtime_suspend, + davinci_pm_runtime_resume, NULL) + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + +static struct pm_clk_notifier_block platform_bus_notifier = { + .pm_domain = &davinci_pm_domain, +}; + +static int __init davinci_pm_runtime_init(void) +{ + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + + return 0; +} +core_initcall(davinci_pm_runtime_init); diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 9493076fc59..4db5de54b6a 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -101,8 +101,8 @@ void __init dove_ehci1_init(void) ****************************************************************************/ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, - DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0); + orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4dd07a0e360..4afe52aaaff 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -797,6 +797,102 @@ static struct platform_device ep93xx_wdt_device = { .resource = ep93xx_wdt_resources, }; +/************************************************************************* + * EP93xx IDE + *************************************************************************/ +static struct resource ep93xx_ide_resources[] = { + DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), + DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), +}; + +static struct platform_device ep93xx_ide_device = { + .name = "ep93xx-ide", + .id = -1, + .dev = { + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(ep93xx_ide_resources), + .resource = ep93xx_ide_resources, +}; + +void __init ep93xx_register_ide(void) +{ + platform_device_register(&ep93xx_ide_device); +} + +int ep93xx_ide_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); + if (err) + goto fail_egpio15; + for (i = 2; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_e; + } + for (i = 4; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_g; + } + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_h; + } + + /* GPIO ports E[7:2], G[7:4] and H used by IDE */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + return 0; + +fail_gpio_h: + for (--i; i >= 0; --i) + gpio_free(EP93XX_GPIO_LINE_H(i)); + i = 8; +fail_gpio_g: + for (--i; i >= 4; --i) + gpio_free(EP93XX_GPIO_LINE_G(i)); + i = 8; +fail_gpio_e: + for (--i; i >= 2; --i) + gpio_free(EP93XX_GPIO_LINE_E(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); +fail_egpio15: + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + return err; +} +EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); + +void ep93xx_ide_release_gpio(struct platform_device *pdev) +{ + int i; + + for (i = 2; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_E(i)); + for (i = 4; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_G(i)); + for (i = 0; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_H(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + + + /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); +} +EXPORT_SYMBOL(ep93xx_ide_release_gpio); + void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d74c5cddb98..337ab7cf4c1 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -91,8 +91,8 @@ static void __init edb93xx_register_i2c(void) ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { + } else if (machine_is_edb9302() || machine_is_edb9307() + || machine_is_edb9312() || machine_is_edb9315()) { ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); @@ -233,6 +233,29 @@ static void __init edb93xx_register_fb(void) } +/************************************************************************* + * EDB93xx IDE + *************************************************************************/ +static int __init edb93xx_has_ide(void) +{ + /* + * Although EDB9312 and EDB9315 do have IDE capability, they have + * INTRQ line wired as pull-up, which makes using IDE interface + * problematic. + */ + return machine_is_edb9312() || machine_is_edb9315() || + machine_is_edb9315a(); +} + +static void __init edb93xx_register_ide(void) +{ + if (!edb93xx_has_ide()) + return; + + ep93xx_register_ide(); +} + + static void __init edb93xx_init_machine(void) { ep93xx_init_devices(); @@ -243,6 +266,7 @@ static void __init edb93xx_init_machine(void) edb93xx_register_i2s(); edb93xx_register_pwm(); edb93xx_register_fb(); + edb93xx_register_ide(); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 1ecb040d98b..33a5122c6dc 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -48,6 +48,9 @@ void ep93xx_register_i2s(void); int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); +void ep93xx_register_ide(void); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h index 979fba72292..7bf7ff8beae 100644 --- a/arch/arm/mach-ep93xx/soc.h +++ b/arch/arm/mach-ep93xx/soc.h @@ -69,6 +69,7 @@ #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 6f6d13f91e4..b5b4c8c9db1 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -207,6 +207,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_BACKLIGHT select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU @@ -326,6 +327,7 @@ config MACH_ORIGEN select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S3C_DEV_USB_HSOTG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -360,22 +362,27 @@ config MACH_SMDK4212 select S3C_DEV_I2C3 select S3C_DEV_I2C7 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_MFC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM select EXYNOS_DEV_SYSMMU select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung SMDK4212 diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index bcb7db45314..2f51293c187 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 13), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { @@ -620,10 +620,6 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, { .name = "mfc", .devname = "s5p-mfc", .enable = exynos4_clk_ip_mfc_ctrl, @@ -819,47 +815,21 @@ static struct clk *exynos4_clkset_mout_g2d0_list[] = { [1] = &exynos4_clk_sclk_apll.clk, }; -static struct clksrc_sources exynos4_clkset_mout_g2d0 = { +struct clksrc_sources exynos4_clkset_mout_g2d0 = { .sources = exynos4_clkset_mout_g2d0_list, .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), }; -static struct clksrc_clk exynos4_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - static struct clk *exynos4_clkset_mout_g2d1_list[] = { [0] = &exynos4_clk_mout_epll.clk, [1] = &exynos4_clk_sclk_vpll.clk, }; -static struct clksrc_sources exynos4_clkset_mout_g2d1 = { +struct clksrc_sources exynos4_clkset_mout_g2d1 = { .sources = exynos4_clkset_mout_g2d1_list, .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), }; -static struct clksrc_clk exynos4_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_g2d_list[] = { - [0] = &exynos4_clk_mout_g2d0.clk, - [1] = &exynos4_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_g2d = { - .sources = exynos4_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list), -}; - static struct clk *exynos4_clkset_mout_mfc0_list[] = { [0] = &exynos4_clk_mout_mpll.clk, [1] = &exynos4_clk_sclk_apll.clk, @@ -1126,13 +1096,6 @@ static struct clksrc_clk exynos4_clksrcs[] = { .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_mfc", .devname = "s5p-mfc", }, @@ -1242,40 +1205,67 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos4_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk exynos4_clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", + .parent = &exynos4_clk_mdout_spi0.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", + .parent = &exynos4_clk_mdout_spi1.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi2 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", + .parent = &exynos4_clk_mdout_spi2.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 }, }; /* Clock initialization code */ @@ -1331,7 +1321,9 @@ static struct clksrc_clk *exynos4_clksrc_cdev[] = { &exynos4_clk_sclk_spi0, &exynos4_clk_sclk_spi1, &exynos4_clk_sclk_spi2, - + &exynos4_clk_mdout_spi0, + &exynos4_clk_mdout_spi1, + &exynos4_clk_mdout_spi2, }; static struct clk_lookup exynos4_clk_lookup[] = { @@ -1347,9 +1339,9 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), }; static int xtal_rate; diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h index 28a11970118..bd12d5f8b63 100644 --- a/arch/arm/mach-exynos/clock-exynos4.h +++ b/arch/arm/mach-exynos/clock-exynos4.h @@ -23,6 +23,9 @@ extern struct clksrc_sources exynos4_clkset_group; extern struct clk *exynos4_clkset_aclk_top_list[]; extern struct clk *exynos4_clkset_group_list[]; +extern struct clksrc_sources exynos4_clkset_mout_g2d0; +extern struct clksrc_sources exynos4_clkset_mout_g2d1; + extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index b8689ff60ba..fed4c26e9da 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -48,6 +48,32 @@ static struct clksrc_clk *sysclks[] = { /* nothing here yet */ }; +static struct clksrc_clk exynos4210_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos4210_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4210_clkset_mout_g2d_list[] = { + [0] = &exynos4210_clk_mout_g2d0.clk, + [1] = &exynos4210_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4210_clkset_mout_g2d = { + .sources = exynos4210_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list), +}; + static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); @@ -74,6 +100,13 @@ static struct clksrc_clk clksrcs[] = { .sources = &exynos4_clkset_group, .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4210_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, }, }; @@ -105,6 +138,10 @@ static struct clk init_clocks_off[] = { .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11), .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 4), + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), }, }; diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index da397d21bbc..8fba0b5fb8a 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -68,12 +68,45 @@ static struct clksrc_clk clk_mout_mpll_user = { .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, }; +static struct clksrc_clk exynos4x12_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 }, +}; + +static struct clksrc_clk exynos4x12_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 }, +}; + +static struct clk *exynos4x12_clkset_mout_g2d_list[] = { + [0] = &exynos4x12_clk_mout_g2d0.clk, + [1] = &exynos4x12_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4x12_clkset_mout_g2d = { + .sources = exynos4x12_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list), +}; + static struct clksrc_clk *sysclks[] = { &clk_mout_mpll_user, }; static struct clksrc_clk clksrcs[] = { - /* nothing here yet */ + { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4x12_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 }, + }, }; static struct clk init_clocks_off[] = { @@ -102,7 +135,11 @@ static struct clk init_clocks_off[] = { .devname = "exynos-fimc-lite.1", .enable = exynos4212_clk_ip_isp0_ctrl, .ctrlbit = (1 << 3), - } + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_dmc_ctrl, + .ctrlbit = (1 << 23), + }, }; #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index fefa336be2b..774533c6706 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -131,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); } +static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable); +} + static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); @@ -741,6 +746,24 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 14), }, { + .name = "spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 18), + }, { .name = SYSMMU_CLOCK_NAME, .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), .enable = &exynos5_clk_ip_mfc_ctrl, @@ -1034,6 +1057,69 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos5_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_mdout_spi0.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_mdout_spi1.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 20), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_mdout_spi2.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 24), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, +}; + static struct clksrc_clk exynos5_clksrcs[] = { { .clk = { @@ -1148,6 +1234,12 @@ static struct clksrc_clk *exynos5_sysclks[] = { &exynos5_clk_dout_mmc4, &exynos5_clk_aclk_acp, &exynos5_clk_pclk_acp, + &exynos5_clk_sclk_spi0, + &exynos5_clk_sclk_spi1, + &exynos5_clk_sclk_spi2, + &exynos5_clk_mdout_spi0, + &exynos5_clk_mdout_spi1, + &exynos5_clk_mdout_spi2, }; static struct clk *exynos5_clk_cdev[] = { @@ -1176,6 +1268,9 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 742edd3bbec..4eb39cdf75e 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -540,7 +540,8 @@ static struct irq_domain_ops combiner_irq_domain_ops = { .map = combiner_irq_domain_map, }; -void __init combiner_init(void __iomem *combiner_base, struct device_node *np) +static void __init combiner_init(void __iomem *combiner_base, + struct device_node *np) { int i, irq, irq_base; unsigned int max_nr, nr_irq; @@ -712,31 +713,6 @@ static int __init exynos4_l2x0_cache_init(void) early_initcall(exynos4_l2x0_cache_init); #endif -static int __init exynos5_l2_cache_init(void) -{ - unsigned int val; - - if (!soc_is_exynos5250()) - return 0; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #(1 << 2)\n" /* cache disable */ - "mcr p15, 0, %0, c1, c0, 0\n" - "mrc p15, 1, %0, c9, c0, 2\n" - : "=r"(val)); - - val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #(1 << 2)\n" /* cache enable */ - "mcr p15, 0, %0, c1, c0, 0\n" - : : "r"(val)); - - return 0; -} -early_initcall(exynos5_l2_cache_init); - static int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 7a4b4789eb7..35bced6f909 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -195,6 +195,10 @@ #define IRQ_IIC6 EXYNOS4_IRQ_IIC6 #define IRQ_IIC7 EXYNOS4_IRQ_IIC7 +#define IRQ_SPI0 EXYNOS4_IRQ_SPI0 +#define IRQ_SPI1 EXYNOS4_IRQ_SPI1 +#define IRQ_SPI2 EXYNOS4_IRQ_SPI2 + #define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST #define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index ca4aa89aa46..c72b675b3e4 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -154,6 +154,9 @@ #define EXYNOS4_PA_SPI0 0x13920000 #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 +#define EXYNOS5_PA_SPI0 0x12D20000 +#define EXYNOS5_PA_SPI1 0x12D30000 +#define EXYNOS5_PA_SPI2 0x12D40000 #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 43a99e6f56a..d4e392b811a 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -232,6 +232,11 @@ #define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) +#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) +#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) + +#define EXYNOS5_SYS_WDTRESET (1 << 20) + #define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000) #define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004) #define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008) diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h index c337cf3a71b..07277735252 100644 --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h +++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h @@ -35,11 +35,21 @@ #define PHY1_COMMON_ON_N (1 << 7) #define PHY0_COMMON_ON_N (1 << 4) #define PHY0_ID_PULLUP (1 << 2) -#define CLKSEL_MASK (0x3 << 0) -#define CLKSEL_SHIFT (0) -#define CLKSEL_48M (0x0 << 0) -#define CLKSEL_12M (0x2 << 0) -#define CLKSEL_24M (0x3 << 0) + +#define EXYNOS4_CLKSEL_SHIFT (0) + +#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) +#define EXYNOS4210_CLKSEL_48M (0x0 << 0) +#define EXYNOS4210_CLKSEL_12M (0x2 << 0) +#define EXYNOS4210_CLKSEL_24M (0x3 << 0) + +#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) +#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) +#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) +#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) +#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) +#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) +#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) #define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) #define HOST_LINK_PORT_SWRST_MASK (0xf << 6) diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h deleted file mode 100644 index c71a5fba6a8..00000000000 --- a/arch/arm/mach-exynos/include/mach/spi-clocks.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h - * - * Copyright (C) 2011 Samsung Electronics Co. Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -/* Must source from SCLK_SPI */ -#define EXYNOS_SPI_SRCCLK_SCLK 0 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e7e9743543a..b2b5d5faa74 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -55,6 +55,12 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { "exynos4-sdhci.3", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), {}, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 7b1e11a228c..ef770bc2318 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -47,6 +47,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 656f8fc9add..ea785fcaf6c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -50,7 +50,6 @@ #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/mfc.h> -#include <plat/pd.h> #include <plat/fimc-core.h> #include <plat/camport.h> #include <plat/mipi_csis.h> @@ -1067,12 +1066,8 @@ static struct platform_device nuri_max8903_device = { static void __init nuri_power_init(void) { int gpio; - int irq_base = IRQ_GPIO_END + 1; int ta_en = 0; - nuri_max8997_pdata.irq_base = irq_base; - irq_base += MAX8997_IRQ_NR; - gpio = EXYNOS4_GPX0(7); gpio_request(gpio, "AP_PMIC_IRQ"); s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); @@ -1342,9 +1337,8 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { - clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); } diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f5572be9d7b..5ca80307d6d 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -9,6 +9,7 @@ */ #include <linux/serial_core.h> +#include <linux/leds.h> #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> @@ -21,6 +22,7 @@ #include <linux/mfd/max8997.h> #include <linux/lcd.h> #include <linux/rfkill-gpio.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -38,7 +40,6 @@ #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> -#include <plat/pd.h> #include <plat/fb.h> #include <plat/mfc.h> @@ -425,7 +426,6 @@ static struct max8997_platform_data __initdata origen_max8997_pdata = { .buck1_gpiodvs = false, .buck2_gpiodvs = false, .buck5_gpiodvs = false, - .irq_base = IRQ_GPIO_END + 1, .ignore_gpiodvs_side_effect = true, .buck125_default_idx = 0x0, @@ -499,6 +499,37 @@ static void __init origen_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat origen_hsotg_pdata; + +static struct gpio_led origen_gpio_leds[] = { + { + .name = "origen::status1", + .default_trigger = "heartbeat", + .gpio = EXYNOS4_GPX1(3), + .active_low = 1, + }, + { + .name = "origen::status2", + .default_trigger = "mmc0", + .gpio = EXYNOS4_GPX1(4), + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data origen_gpio_led_info = { + .leds = origen_gpio_leds, + .num_leds = ARRAY_SIZE(origen_gpio_leds), +}; + +static struct platform_device origen_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &origen_gpio_led_info, + }, +}; + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -655,6 +686,7 @@ static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_i2c0, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -677,6 +709,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_leds_gpio, &origen_device_bluetooth, }; @@ -712,7 +745,7 @@ static void s5p_tv_setup(void) static void __init origen_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); } @@ -744,7 +777,7 @@ static void __init origen_machine_init(void) origen_ehci_init(); origen_ohci_init(); - clk_xusbxti.rate = 24000000; + s3c_hsotg_set_platdata(&origen_hsotg_pdata); s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fb09c70e195..b26beb13ebe 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -13,12 +13,14 @@ #include <linux/i2c.h> #include <linux/input.h> #include <linux/io.h> +#include <linux/lcd.h> #include <linux/mfd/max8997.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/regulator/machine.h> #include <linux/serial_core.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -28,15 +30,18 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/keypad.h> #include <plat/mfc.h> +#include <plat/regs-fb.h> #include <plat/regs-serial.h> #include <plat/sdhci.h> #include <mach/map.h> +#include <drm/exynos_drm.h> #include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = { static uint32_t smdk4x12_keymap[] __initdata = { /* KEY(row, col, keycode) */ - KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), - KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) + KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), + KEY(1, 6, KEY_4), KEY(1, 7, KEY_5), + KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B), + KEY(0, 7, KEY_E), KEY(0, 5, KEY_C) }; static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { @@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { .keymap_data = &smdk4x12_keymap_data, - .rows = 2, - .cols = 5, + .rows = 3, + .cols = 8, }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 8, + .right_margin = 8, + .upper_margin = 6, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 4, + .xres = 480, + .yres = 800, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 0, + .bpp = 32, +}; +#else +static struct s3c_fb_pd_win smdk4x12_fb_win0 = { + .xres = 480, + .yres = 800, + .virtual_x = 480, + .virtual_y = 800 * 2, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct fb_videomode smdk4x12_lcd_timing = { + .left_margin = 8, + .right_margin = 8, + .upper_margin = 6, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 4, + .xres = 480, + .yres = 800, +}; + +static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = { + .win[0] = &smdk4x12_fb_win0, + .vtiming = &smdk4x12_lcd_timing, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; +#endif + +/* USB OTG */ +static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; + static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_i2c3, &s3c_device_i2c7, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, &s5p_device_fimc_md, + &s5p_device_fimd0, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif &samsung_device_keypad, }; static void __init smdk4x12_map_io(void) { - clk_xusbxti.rate = 24000000; - exynos_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); @@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void) s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); + +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else + s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); +#endif + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); } diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 262e9e446a9..3cfa688d274 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -19,6 +19,7 @@ #include <linux/i2c.h> #include <linux/input.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -34,7 +35,6 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> -#include <plat/pd.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> @@ -271,6 +271,15 @@ static void __init smdkv310_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat smdkv310_hsotg_pdata; + +/* Audio device */ +static struct platform_device smdkv310_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -279,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_i2c1, &s5p_device_i2c_hdmiphy, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -302,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &samsung_asoc_dma, &samsung_asoc_idma, &s5p_device_fimd0, + &smdkv310_device_audio, &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, @@ -354,7 +365,7 @@ static void s5p_tv_setup(void) static void __init smdkv310_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); } @@ -390,7 +401,7 @@ static void __init smdkv310_machine_init(void) smdkv310_ehci_init(); smdkv310_ohci_init(); - clk_xusbxti.rate = 24000000; + s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata); platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } @@ -417,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210") .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, .timer = &exynos4_timer, + .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cd92fa86ba4..4d1f40d44ed 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -39,7 +39,6 @@ #include <plat/fb.h> #include <plat/mfc.h> #include <plat/sdhci.h> -#include <plat/pd.h> #include <plat/regs-fb-v4.h> #include <plat/fimc-core.h> #include <plat/s5p-time.h> @@ -1100,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { - clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index e9fafcf163d..373c3c00d24 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { - if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) + pm_genpd_dev_need_restore(&pdev->dev, true); + else pr_info("%s: error in adding %s device to %s power" "domain\n", __func__, dev_name(&pdev->dev), pd->name); @@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void) if (of_have_populated_dt()) return exynos_pm_dt_parse_domains(); - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) - pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, - exynos4_pm_domains[idx]->is_off); + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { + struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; + int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); + } #ifdef CONFIG_S5P_DEV_FIMD0 exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 4aacb66f716..3a48c852be6 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -315,7 +315,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = { { PMU_TABLE_END,}, }; -void __iomem *exynos5_list_both_cnt_feed[] = { +static void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_ARM_CORE0_OPTION, EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_ARM_COMMON_OPTION, @@ -329,7 +329,7 @@ void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_TOP_PWR_SYSMEM_OPTION, }; -void __iomem *exynos5_list_diable_wfi_wfe[] = { +static void __iomem *exynos5_list_diable_wfi_wfe[] = { EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_FSYS_ARM_OPTION, EXYNOS5_ISP_ARM_OPTION, @@ -390,6 +390,8 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) static int __init exynos_pmu_init(void) { + unsigned int value; + exynos_pmu_config = exynos4210_pmu_config; if (soc_is_exynos4210()) { @@ -399,6 +401,18 @@ static int __init exynos_pmu_init(void) exynos_pmu_config = exynos4x12_pmu_config; pr_info("EXYNOS4x12 PMU Initialize\n"); } else if (soc_is_exynos5250()) { + /* + * When SYS_WDTRESET is set, watchdog timer reset request + * is ignored by power management unit. + */ + value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); + + value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); + exynos_pmu_config = exynos5250_pmu_config; pr_info("EXYNOS5250 PMU Initialize\n"); } else { diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c index 833ff40ee0e..4999829d1c6 100644 --- a/arch/arm/mach-exynos/setup-spi.c +++ b/arch/arm/mach-exynos/setup-spi.c @@ -9,21 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); @@ -34,15 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); @@ -53,15 +34,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI2 -struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi2_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 1af0a7f44e0..b81cc569a8d 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -31,27 +31,55 @@ static void exynos4210_usb_phy_clkset(struct platform_device *pdev) struct clk *xusbxti_clk; u32 phyclk; - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; + if (soc_is_exynos4210()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 12 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_12M; + break; + case 48 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_48M; + break; + default: + case 24 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 9600 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_9600K; + break; + case 10 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_10M; + break; + case 12 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_12M; + break; + case 19200 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_19200K; + break; + case 20 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_20M; + break; + default: + case 24 * MHZ: + /* default reference clock */ + phyclk |= EXYNOS4X12_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); } clk_put(xusbxti_clk); } - - writel(phyclk, EXYNOS4_PHYCLK); } static int exynos4210_usb_phy0_init(struct platform_device *pdev) diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index ded4652ada8..3ec8bdd25d0 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,4 @@ -obj-y := clock.o highbank.o system.o smc.o +obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c deleted file mode 100644 index c25a2ae4fde..00000000000 --- a/arch/arm/mach-highbank/clock.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/clkdev.h> - -struct clk { - unsigned long rate; -}; - -int clk_enable(struct clk *clk) -{ - return 0; -} - -void clk_disable(struct clk *clk) -{} - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk->rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -static struct clk eclk = { .rate = 200000000 }; -static struct clk pclk = { .rate = 150000000 }; - -static struct clk_lookup lookups[] = { - { .clk = &pclk, .con_id = "apb_pclk", }, - { .clk = &pclk, .dev_id = "sp804", }, - { .clk = &eclk, .dev_id = "ffe0e000.sdhci", }, - { .clk = &pclk, .dev_id = "fff36000.serial", }, -}; - -void __init highbank_clocks_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8777612b1a4..d75b0a78d88 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -105,6 +105,11 @@ static void __init highbank_init_irq(void) #endif } +static struct clk_lookup lookup = { + .dev_id = "sp804", + .con_id = NULL, +}; + static void __init highbank_timer_init(void) { int irq; @@ -122,6 +127,8 @@ static void __init highbank_timer_init(void) irq = irq_of_parse_and_map(np, 0); highbank_clocks_init(); + lookup.clk = of_clk_get(np, 0); + clkdev_add(&lookup); sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5de0d..afd542ad6f9 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,7 @@ config SOC_IMX25 select ARCH_MX25 select COMMON_CLK select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -73,12 +74,13 @@ config SOC_IMX31 config SOC_IMX35 bool - select CPU_V6 + select CPU_V6K select ARCH_MXC_IOMUX_V3 select COMMON_CLK select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP + select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 select CPU_V7 @@ -105,6 +107,7 @@ config SOC_IMX53 select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -158,7 +161,6 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -380,7 +382,6 @@ config MACH_IMX27IPCAM config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 - select USE_OF help Include support for Freescale i.MX27 based platforms using the device tree for discovery @@ -557,6 +558,14 @@ config MACH_BUG Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX31_DT + bool "Support i.MX31 platforms from device tree" + select SOC_IMX31 + select USE_OF + help + Include support for Freescale i.MX31 based platforms + using the device tree for discovery. + comment "MX35 platforms:" config MACH_PCM043 @@ -589,6 +598,7 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX35PDK platform. This includes specific @@ -663,7 +673,6 @@ comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" select SOC_IMX51 - select USE_OF select MACH_MX51_BABBAGE help Include support for Freescale i.MX51 based platforms @@ -759,7 +768,6 @@ comment "i.MX53 machines:" config MACH_IMX53_DT bool "Support i.MX53 platforms from device tree" select SOC_IMX53 - select USE_OF select MACH_MX53_ARD select MACH_MX53_EVK select MACH_MX53_LOCO @@ -826,13 +834,14 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU + select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP + select MFD_ANATOP select PINCTRL select PINCTRL_IMX6Q - select USE_OF help This enables support for Freescale i.MX6 Quad processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ff29421414f..07f7c226e4c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o obj-$(CONFIG_MACH_BUG) += mach-bug.o +obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 295cbd7c08d..7aa6313fb16 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -256,7 +256,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL); + clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); @@ -267,6 +267,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_prepare_enable(clk[emi_ahb_gate]); + imx_print_silicon_rev("i.MX27", mx27_revision()); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index c9a06d800f8..8e19e70f90f 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -20,6 +20,7 @@ #include <linux/clkdev.h> #include <linux/io.h> #include <linux/err.h> +#include <linux/of.h> #include <mach/hardware.h> #include <mach/mx31.h> @@ -123,7 +124,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); clk_register_clkdev(clk[pwm_gate], "pwm", NULL); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[rtc_gate], "rtc", NULL); + clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc"); clk_register_clkdev(clk[epit1_gate], "epit", NULL); clk_register_clkdev(clk[epit2_gate], "epit", NULL); clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); @@ -165,7 +166,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[firi_gate], "firi", NULL); clk_register_clkdev(clk[ata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[rtic_gate], "rtic", NULL); - clk_register_clkdev(clk[rng_gate], "rng", NULL); + clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga"); clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma"); clk_register_clkdev(clk[iim_gate], "iim", NULL); @@ -179,3 +180,21 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } + +#ifdef CONFIG_OF +int __init mx31_clocks_init_dt(void) +{ + struct device_node *np; + u32 fref = 26000000; /* default */ + + for_each_compatible_node(np, NULL, "fixed-clock") { + if (!of_device_is_compatible(np, "fsl,imx-osc26m")) + continue; + + if (!of_property_read_u32(np, "clock-frequency", &fref)) + break; + } + + return mx31_clocks_init(fref); +} +#endif diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index a2200c77bf7..f6086693ebd 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -58,7 +58,7 @@ enum imx5_clks { tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate, uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate, gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate, - gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate, + gpt_hf_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate, esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate, ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate, ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s, @@ -81,6 +81,7 @@ enum imx5_clks { ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred, ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, + epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, clk_max }; @@ -167,12 +168,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16); clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18); clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20); - clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20); clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10); - clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); + clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); - clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); + clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16); + clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_hf_gate] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -226,13 +227,17 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26); clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28); clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30); + clk[epit1_ipg_gate] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2); + clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4); + clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); + clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX5 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); + clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0"); @@ -248,7 +253,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0"); clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1"); clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1"); - clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0"); + clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1"); clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); @@ -279,6 +284,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[dummy], NULL, "imx-keypad"); clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0"); + clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); + clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0"); + clk_register_clkdev(clk[epit1_hf_gate], "per", "imx-epit.0"); + clk_register_clkdev(clk[epit2_ipg_gate], "ipg", "imx-epit.1"); + clk_register_clkdev(clk[epit2_hf_gate], "per", "imx-epit.1"); /* Set SDHC parents to be PLL2 */ clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]); @@ -336,7 +346,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu"); clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index e1a17ac7b3b..ea89520b6e2 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -147,12 +147,12 @@ enum mx6q_clks { esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb, hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2, ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi, - mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, + mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch, gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, clk_max }; @@ -198,6 +198,9 @@ int __init mx6q_clocks_init(void) clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3); clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3); + clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); + clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -318,7 +321,7 @@ int __init mx6q_clocks_init(void) clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); /* name parent_name reg shift */ - clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4); + clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); @@ -357,6 +360,7 @@ int __init mx6q_clocks_init(void) clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); + clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18); clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20); @@ -388,12 +392,21 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi"); - clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi"); clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[usboh3], NULL, "usboh3"); + clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); + clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); + clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); + clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); + clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 2628e0c474d..93ece55f75d 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -14,7 +14,7 @@ extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; -#define imx21_add_imx2_wdt(pdata) \ +#define imx21_add_imx2_wdt() \ imx_add_imx2_wdt(&imx21_imx2_wdt_data) extern const struct imx_imx_fb_data imx21_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_mxc_nand_data imx21_mxc_nand_data; imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx21_mxc_w1_data; -#define imx21_add_mxc_w1(pdata) \ +#define imx21_add_mxc_w1() \ imx_add_mxc_w1(&imx21_mxc_w1_data) extern const struct imx_spi_imx_data imx21_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index efa0761c508..f8e03dd1f11 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -24,11 +24,11 @@ extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc(pdata) \ +#define imx25_add_imxdi_rtc() \ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt(pdata) \ +#define imx25_add_imx2_wdt() \ imx_add_imx2_wdt(&imx25_imx2_wdt_data) extern const struct imx_imx_fb_data imx25_imx_fb_data; diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 28537a5d904..436c5720fe6 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -18,7 +18,7 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; -#define imx27_add_imx2_wdt(pdata) \ +#define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) extern const struct imx_imx_fb_data imx27_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) -#define imx27_add_mx2_emmaprp(pdata) \ +#define imx27_add_mx2_emmaprp() \ imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; @@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx27_mxc_nand_data; imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx27_mxc_w1_data; -#define imx27_add_mxc_w1(pdata) \ +#define imx27_add_mxc_w1() \ imx_add_mxc_w1(&imx27_mxc_w1_data) extern const struct imx_spi_imx_data imx27_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 488e241a6db..8b2ceb45bb8 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -14,7 +14,7 @@ extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; -#define imx31_add_imx2_wdt(pdata) \ +#define imx31_add_imx2_wdt() \ imx_add_imx2_wdt(&imx31_imx2_wdt_data) extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; @@ -42,8 +42,8 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) extern const struct imx_ipu_core_data imx31_ipu_core_data; -#define imx31_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx31_ipu_core_data, pdata) +#define imx31_add_ipu_core() \ + imx_add_ipu_core(&imx31_ipu_core_data) #define imx31_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) #define imx31_add_mx3_sdc_fb(pdata) \ @@ -65,11 +65,11 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data; imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; -#define imx31_add_mxc_rtc(pdata) \ +#define imx31_add_mxc_rtc() \ imx_add_mxc_rtc(&imx31_mxc_rtc_data) extern const struct imx_mxc_w1_data imx31_mxc_w1_data; -#define imx31_add_mxc_w1(pdata) \ +#define imx31_add_mxc_w1() \ imx_add_mxc_w1(&imx31_mxc_w1_data) extern const struct imx_spi_imx_data imx31_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 7b99ef0bb50..c3e9f206ac2 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -24,7 +24,7 @@ extern const struct imx_flexcan_data imx35_flexcan_data[]; #define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; -#define imx35_add_imx2_wdt(pdata) \ +#define imx35_add_imx2_wdt() \ imx_add_imx2_wdt(&imx35_imx2_wdt_data) extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; @@ -50,8 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) extern const struct imx_ipu_core_data imx35_ipu_core_data; -#define imx35_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx35_ipu_core_data, pdata) +#define imx35_add_ipu_core() \ + imx_add_ipu_core(&imx35_ipu_core_data) #define imx35_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) #define imx35_add_mx3_sdc_fb(pdata) \ @@ -68,8 +68,12 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) +extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data; +#define imx35_add_mxc_rtc() \ + imx_add_mxc_rtc(&imx35_mxc_rtc_data) + extern const struct imx_mxc_w1_data imx35_mxc_w1_data; -#define imx35_add_mxc_w1(pdata) \ +#define imx35_add_mxc_w1() \ imx_add_mxc_w1(&imx35_mxc_w1_data) extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e22..9f171872519 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -55,7 +55,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[]; imx_add_spi_imx(&imx51_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; -#define imx51_add_imx2_wdt(id, pdata) \ +#define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3..77e0db96c44 100644 --- a/arch/arm/mach-imx/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h @@ -30,7 +30,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; imx_add_spi_imx(&imx53_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id, pdata) \ +#define imx53_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 865daf0b09e..05bb41d9972 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -24,14 +24,18 @@ #define MX25_OTG_SIC_SHIFT 29 #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) #define MX25_OTG_PM_BIT (1 << 24) +#define MX25_OTG_PP_BIT (1 << 11) +#define MX25_OTG_OCPOL_BIT (1 << 3) #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT (1 << 18) #define MX25_H1_PM_BIT (1 << 8) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) #define MX25_H1_USBTE_BIT (1 << 4) +#define MX25_H1_OCPOL_BIT (1 << 2) int mx25_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx25_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT); + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | + MX25_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT | - MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | + MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | + MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX25_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 001ec3971f5..73574c30cf5 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -24,14 +24,18 @@ #define MX35_OTG_SIC_SHIFT 29 #define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) #define MX35_OTG_PM_BIT (1 << 24) +#define MX35_OTG_PP_BIT (1 << 11) +#define MX35_OTG_OCPOL_BIT (1 << 3) #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PP_BIT (1 << 18) #define MX35_H1_PM_BIT (1 << 8) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) #define MX35_H1_USBTE_BIT (1 << 4) +#define MX35_H1_OCPOL_BIT (1 << 2) int mx35_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx35_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | + MX35_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | + MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT | + MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX35_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728..a6a4afb0ad6 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -28,11 +28,14 @@ #define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ #define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ #define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ /* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */ /* USBH2CTRL */ #define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) @@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; } + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else v &= ~MXC_OTG_UCTRL_OPM_BIT; + else + v |= MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; @@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/ else v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ else @@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/ else v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b46cab0ced5..fd3177f9e79 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -266,7 +266,7 @@ static struct spi_board_info __maybe_unused .bus_num = 0, .chip_select = 0, .max_speed_hz = 1500000, - .irq = IRQ_GPIOD(25), + /* irq number is run-time assigned */ .platform_data = &ads7846_config, .mode = SPI_MODE_2, }, @@ -329,6 +329,7 @@ void __init eukrea_mbimx27_baseboard_init(void) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); + eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 557f6c48605..6e9dd12a696 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -95,10 +95,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CMO-QVGA", .mode = fb_modedb, @@ -287,7 +283,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) printk(KERN_ERR "error setting mbimxsd pads !\n"); imx35_add_imx_uart1(&uart_pdata); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index eee0cc8d92a..e80d5235dac 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -10,7 +10,6 @@ */ #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -33,35 +32,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx27_avic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx27_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - -static const struct of_device_id imx27_irq_match[] __initconst = { - { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, }, - { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static void __init imx27_dt_init(void) { - of_irq_init(imx27_irq_match); - of_platform_populate(NULL, of_default_bus_match_table, imx27_auxdata_lookup, NULL); } @@ -75,7 +47,7 @@ static struct sys_timer imx27_timer = { .init = imx27_timer_init, }; -static const char *imx27_dt_board_compat[] __initdata = { +static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL }; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c new file mode 100644 index 00000000000..a68ba207b2b --- /dev/null +++ b/arch/arm/mach-imx/imx31-dt.c @@ -0,0 +1,63 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mx31.h> + +static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, + "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR, + "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR, + "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR, + "imx21-uart.3", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR, + "imx21-uart.4", NULL), + { /* sentinel */ } +}; + +static void __init imx31_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + imx31_auxdata_lookup, NULL); +} + +static void __init imx31_timer_init(void) +{ + mx31_clocks_init_dt(); +} + +static struct sys_timer imx31_timer = { + .init = imx31_timer_init, +}; + +static const char *imx31_dt_board_compat[] __initdata = { + "fsl,imx31", + NULL +}; + +DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, + .timer = &imx31_timer, + .init_machine = imx31_dt_init, + .dt_compat = imx31_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 18e78dba429..d4067fe3635 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -11,7 +11,6 @@ */ #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -45,30 +44,6 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx51_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx51_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx51_irq_match[] __initconst = { - { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, }, - { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, { /* sentinel */ } @@ -80,8 +55,6 @@ static void __init imx51_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx51_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx51_iomuxc_of_match); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index eb04b6248e4..1b7a2fc3659 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -15,7 +15,6 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -52,30 +51,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx53_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx53_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx53_irq_match[] __initconst = { - { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, }, - { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, @@ -103,8 +78,6 @@ static void __init imx53_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx53_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx53_iomuxc_of_match); @@ -147,6 +120,7 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .handle_irq = imx53_handle_irq, .timer = &imx53_timer, .init_machine = imx53_dt_init, + .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index f4a63ee9e21..7b99a79722b 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/dm9000.h> +#include <linux/gpio.h> #include <linux/i2c.h> #include <asm/mach-types.h> @@ -26,7 +27,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-mx1.h> #include "devices-imx1.h" @@ -87,8 +87,7 @@ static struct resource dm9000_resources[] = { .end = MX1_CS4_PHYS + 0x00C00003, .flags = IORESOURCE_MEM, }, { - .start = IRQ_GPIOB(14), - .end = IRQ_GPIOB(14), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -129,6 +128,8 @@ static void __init apf9328_init(void) imx1_add_imx_i2c(&apf9328_i2c_data); + dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); + dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index c650145d164..2c6ab3273f9 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -367,10 +367,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CRT-VGA", .mode = fb_modedb, @@ -408,7 +404,8 @@ static int armadillo5x0_sdhc1_init(struct device *dev, gpio_direction_input(gpio_wp); /* When supported the trigger type have to be BOTH */ - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), + detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "sdhc-detect", data); @@ -429,7 +426,7 @@ err_gpio_free: static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); } @@ -450,8 +447,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -498,6 +494,10 @@ static void __init armadillo5x0_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); @@ -513,7 +513,7 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index d085aea0870..2bb9e18d9ee 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -169,28 +169,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - .irq = IRQ_GPIOB(22), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - .irq = IRQ_GPIOB(27), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - .irq = IRQ_GPIOB(30), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, @@ -233,18 +233,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx27_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx27_otg_mode); @@ -266,8 +266,8 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ @@ -279,6 +279,10 @@ static void __init eukrea_cpuimx27_init(void) #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); + serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); + serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); + serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); platform_device_register(&serial_device); #endif diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 6450303f1a7..d49b0ec6bde 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -71,7 +71,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, { I2C_BOARD_INFO("tsc2007", 0x48), .platform_data = &tsc2007_info, - .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), + /* irq number is run-time assigned */ }, }; @@ -141,18 +141,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx35_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx35_otg_mode); @@ -167,11 +167,12 @@ static void __init eukrea_cpuimx35_init(void) ARRAY_SIZE(eukrea_cpuimx35_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); + eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO); i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 1e09de50cbc..b87cc49ab1e 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -217,18 +217,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx51sd_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); @@ -258,7 +258,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = { .mode = SPI_MODE_0, .chip_select = 0, .platform_data = &mcp251x_info, - .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO) + /* irq number is run-time assigned */ }, }; @@ -292,7 +292,7 @@ static void __init eukrea_cpuimx51sd_init(void) imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); gpio_request(ETH_RST, "eth_rst"); gpio_set_value(ETH_RST, 1); @@ -309,6 +309,7 @@ static void __init eukrea_cpuimx51sd_init(void) msleep(20); gpio_set_value(CAN_RST, 1); imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); + cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); spi_register_board_info(cpuimx51sd_spi_device, ARRAY_SIZE(cpuimx51sd_spi_device)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index d1e04e676e3..017bbb70ea4 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -109,18 +109,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx25_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx25_otg_mode); @@ -134,9 +134,9 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index ba09552fe5f..f264ddddd47 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -40,6 +40,7 @@ #include <asm/mach/time.h> #include <asm/system_info.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -47,7 +48,7 @@ #define TVP5150_RSTN (GPIO_PORTC + 18) #define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) -#define SDHC1_IRQ IRQ_GPIOB(25) +#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) @@ -307,14 +308,14 @@ static int visstrim_m10_sdhc1_init(struct device *dev, { int ret; - ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, - "mmc-detect", data); + ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); return ret; } static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) { - free_irq(SDHC1_IRQ, data); + free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); } static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index c9d350c5dcc..7381387a890 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -57,7 +57,7 @@ static void __init mx27ipcam_init(void) imx27_add_imx_uart0(NULL); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); } static void __init mx27ipcam_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b47e98b7d53..5ec0608f2a7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,11 +12,12 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/cpuidle.h> #include <linux/delay.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -24,6 +25,8 @@ #include <linux/pinctrl/machine.h> #include <linux/phy.h> #include <linux/micrel_phy.h> +#include <linux/mfd/anatop.h> +#include <asm/cpuidle.h> #include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> @@ -31,8 +34,10 @@ #include <asm/mach/time.h> #include <asm/system_misc.h> #include <mach/common.h> +#include <mach/cpuidle.h> #include <mach/hardware.h> + void imx6q_restart(char mode, const char *cmd) { struct device_node *np; @@ -113,6 +118,45 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_usb_init(void) +{ + struct device_node *np; + struct platform_device *pdev = NULL; + struct anatop *adata = NULL; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + if (np) + pdev = of_find_device_by_node(np); + if (pdev) + adata = platform_get_drvdata(pdev); + if (!adata) { + if (np) + of_node_put(np); + return; + } + +#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 +#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 + +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 + + /* + * The external charger detector needs to be disabled, + * or the signal at DP will be poor + */ + anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + + of_node_put(np); +} + static void __init imx6q_init_machine(void) { /* @@ -127,6 +171,20 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6q_pm_init(); + imx6q_usb_init(); +} + +static struct cpuidle_driver imx6q_cpuidle_driver = { + .name = "imx6q_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .state_count = 1, +}; + +static void __init imx6q_init_late(void) +{ + imx_cpuidle_init(&imx6q_cpuidle_driver); } static void __init imx6q_map_io(void) @@ -136,21 +194,8 @@ static void __init imx6q_map_io(void) imx6q_clock_map_io(); } -static int __init imx6q_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - static const struct of_device_id imx6q_irq_match[] __initconst = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, }, { /* sentinel */ } }; @@ -186,6 +231,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") .handle_irq = imx6q_handle_irq, .timer = &imx6q_timer, .init_machine = imx6q_init_machine, + .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, .restart = imx6q_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 15a26e90826..5d08533ab2c 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), .mapbase = KZM_ARM11_16550, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .irqflags = IRQ_TYPE_EDGE_RISING, .uartclk = 14745600, .regshift = 0, @@ -91,8 +91,7 @@ static struct resource serial8250_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -125,6 +124,13 @@ static int __init kzm_init_ext_uart(void) tmp |= 0x2; __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); + serial_platform_data[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + return platform_device_register(&serial_device); } #else @@ -152,8 +158,7 @@ static struct resource kzm_smsc9118_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -184,6 +189,11 @@ static int __init kzm_init_smsc9118(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + kzm_smsc9118_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + kzm_smsc9118_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 7274e792813..667f359a2e8 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -26,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx1.h> -#include <mach/irqs.h> #include "devices-imx1.h" diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 3e7401fca76..ed22e3fe6ec 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -38,7 +38,7 @@ (MX21ADS_MMIO_BASE_ADDR + (offset)) #define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) @@ -159,9 +159,10 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; -static const struct resource mx21ads_cs8900_resources[] __initconst = { +static struct resource mx21ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), - DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ), + /* irq number is run-time assigned */ + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { @@ -241,13 +242,13 @@ static int mx21ads_sdhc_get_ro(struct device *dev) static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOD(25), detect_irq, + return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOD(25), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -304,6 +305,11 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + mx21ads_cs8900_resources[1].start = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); + mx21ads_cs8900_resources[1].end = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); platform_device_register_full(&mx21ads_cs8900_devinfo); } diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index f26734298aa..ce247fd1269 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -237,9 +237,9 @@ static void __init mx25pdk_init(void) imx25_add_fsl_usb2_udc(&otg_device_pdata); imx25_add_mxc_ehci_hs(&usbh2_pdata); imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); mx25pdk_fec_reset(); imx25_add_fec(&mx25_fec_pdata); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index c6d385c5225..58c24c1a7ab 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -40,7 +40,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/ulpi.h> -#include <mach/irqs.h> #include <mach/3ds_debugboard.h> #include "devices-imx27.h" @@ -48,7 +47,6 @@ #define SD1_EN_GPIO IMX_GPIO_NR(2, 25) #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) #define SPI2_SS0 IMX_GPIO_NR(4, 21) -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) #define PMIC_INT IMX_GPIO_NR(3, 14) #define SPI1_SS0 IMX_GPIO_NR(4, 28) #define SD1_CD IMX_GPIO_NR(2, 26) @@ -241,18 +239,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx27_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx27_3ds_otg_mode); @@ -445,7 +443,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IMX_GPIO_TO_IRQ(PMIC_INT), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -480,7 +478,7 @@ static void __init mx27pdk_init(void) imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); otg_phy_init(); if (otg_mode_host) { @@ -496,10 +494,11 @@ static void __init mx27pdk_init(void) imx27_add_spi_imx1(&spi2_pdata); imx27_add_spi_imx0(&spi1_pdata); + mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); - if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 0228d2e07fe..7dc59bac0e5 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -246,25 +246,25 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, - "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, - "sdhc2-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc2-card-detect", data); } static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOE(21), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data); } static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(7), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { @@ -310,7 +310,7 @@ static void __init mx27ads_board_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(NULL); + imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4eafdf275ea..8915f937b7d 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -44,9 +44,6 @@ #include "devices-imx31.h" -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, @@ -277,10 +274,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Epson-VGA", .mode = fb_modedb, @@ -317,7 +310,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, return ret; } - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); @@ -336,7 +329,7 @@ gpio_free: static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); gpio_free_array(mx31_3ds_sdhc1_gpios, ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); } @@ -539,7 +532,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 1, /* SS2 */ .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -671,18 +664,18 @@ static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx31_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx31_3ds_otg_mode); @@ -714,6 +707,7 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_nand(&mx31_3ds_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); @@ -736,15 +730,15 @@ static void __init mx31_3ds_init(void) if (!otg_mode_host) imx31_add_fsl_usb2_udc(&usbotg_pdata); - if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); imx31_add_mxc_mmc(0, &sdhc1_pdata); imx31_add_spi_imx0(&spi0_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4518e544822..d37f4809c55 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -62,20 +63,18 @@ #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) #define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) -#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_XUART_INTA 10 +#define EXPIO_INT_XUART_INTB 11 #define MXC_MAX_EXP_IO_LINES 16 /* CS8900 */ -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_ENET_INT 8 #define CS4_CS8900_MMIO_START 0x20000 +static struct irq_domain *domain; + /* * The serial port definition structure. */ @@ -83,7 +82,6 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), - .irq = EXPIO_INT_XUART_INTA, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -91,7 +89,6 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), - .irq = EXPIO_INT_XUART_INTB, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -108,9 +105,9 @@ static struct platform_device serial_device = { }, }; -static const struct resource mx31ads_cs8900_resources[] __initconst = { +static struct resource mx31ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), - DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { @@ -122,11 +119,19 @@ static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { static int __init mxc_init_extuart(void) { + serial_platform_data[0].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTA); + serial_platform_data[1].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTB); return platform_device_register(&serial_device); } static void __init mxc_init_ext_ethernet(void) { + mx31ads_cs8900_resources[1].start = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); + mx31ads_cs8900_resources[1].end = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); platform_device_register_full( (struct platform_device_info *)&mx31ads_cs8900_devinfo); } @@ -157,12 +162,12 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) imr_val = __raw_readw(PBC_INTMASK_SET_REG); int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; - expio_irq = MXC_EXP_IO_BASE; + expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { if ((int_valid & 1) == 0) continue; - generic_handle_irq(expio_irq); + generic_handle_irq(irq_find_mapping(domain, expio_irq)); } } @@ -172,7 +177,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) */ static void expio_mask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* mask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); __raw_readw(PBC_INTMASK_CLEAR_REG); @@ -184,7 +189,7 @@ static void expio_mask_irq(struct irq_data *d) */ static void expio_ack_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* clear the interrupt status */ __raw_writew(1 << expio, PBC_INTSTATUS_REG); } @@ -195,7 +200,7 @@ static void expio_ack_irq(struct irq_data *d) */ static void expio_unmask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* unmask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_SET_REG); } @@ -209,7 +214,8 @@ static struct irq_chip expio_irq_chip = { static void __init mx31ads_init_expio(void) { - int i; + int irq_base; + int i, irq; printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); @@ -221,13 +227,21 @@ static void __init mx31ads_init_expio(void) /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); __raw_writew(0xFFFF, PBC_INTSTATUS_REG); - for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); - irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); + irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(irq, mx31ads_expio_irq_handler); } #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -479,7 +493,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { .init = mx31_wm8350_init, - .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, }; #endif @@ -488,13 +501,17 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { { I2C_BOARD_INFO("wm8350", 0x1a), .platform_data = &mx31_wm8350_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }, #endif }; static void __init mxc_init_i2c(void) { +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + mx31ads_i2c1_devices[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); +#endif i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 83714b0cc29..34b9bf075da 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -65,8 +65,7 @@ static struct resource smsc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -233,7 +232,7 @@ static struct spi_board_info mc13783_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; static struct platform_device *devices[] __initdata = { @@ -285,10 +284,15 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx0(&spi0_pdata); imx31_add_spi_imx1(&spi1_pdata); + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_dev, 1); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + smsc91x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + smsc91x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 686c6058798..c8785b39eae 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -43,7 +43,6 @@ #include <mach/common.h> #include <mach/board-mx31lite.h> #include <mach/iomux-mx3.h> -#include <mach/irqs.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -83,8 +82,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), - .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -124,7 +122,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; /* @@ -258,6 +256,7 @@ static void __init mx31lite_init(void) imx31_add_mxc_nand(&mx31lite_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_spi_dev, 1); /* USB */ @@ -274,6 +273,10 @@ static void __init mx31lite_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); platform_device_register(&smsc911x_device); } } diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 016791f038b..d46290b288e 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -303,7 +303,7 @@ static struct imx_ssi_platform_data moboard_ssi_pdata = { static struct spi_board_info moboard_spi_board_info[] __initdata = { { .modalias = "mc13783", - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .max_speed_hz = 300000, .bus_num = 1, .chip_select = 0, @@ -473,10 +473,6 @@ static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { .leds = mx31moboard_leds, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; @@ -494,7 +490,7 @@ static int __init mx31moboard_init_cam(void) int dma, ret = -ENOMEM; struct platform_device *pdev; - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); pdev = imx31_alloc_mx3_camera(&camera_pdata); if (IS_ERR(pdev)) @@ -544,7 +540,7 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -557,6 +553,8 @@ static void __init mx31moboard_init(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + moboard_spi_board_info[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(moboard_spi_board_info, ARRAY_SIZE(moboard_spi_board_info)); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 28aa19476de..504983c68aa 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -46,7 +46,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/irqs.h> #include <mach/3ds_debugboard.h> #include <video/platform_lcd.h> @@ -80,10 +79,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Ceramate-CLAA070VC01", .mode = fb_modedb, @@ -136,8 +131,6 @@ static struct platform_device mx35_3ds_lcd = { .dev.platform_data = &mx35_3ds_lcd_data, }; -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -297,10 +290,6 @@ err: return ret; } -static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct i2c_board_info mx35_3ds_i2c_camera = { I2C_BOARD_INFO("ov2640", 0x30), }; @@ -492,7 +481,7 @@ static struct i2c_board_info mx35_3ds_i2c_mc13892 = { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &mx35_3ds_mc13892_data, - .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), + /* irq number is run-time assigned */ }; static void __init imx35_3ds_init_mc13892(void) @@ -504,6 +493,7 @@ static void __init imx35_3ds_init_mc13892(void) return; } + mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); } @@ -540,18 +530,18 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx35_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx35_3ds_otg_mode); @@ -571,7 +561,8 @@ static void __init mx35_3ds_init(void) mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); + imx35_add_mxc_rtc(); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); @@ -587,7 +578,7 @@ static void __init mx35_3ds_init(void) imx35_add_mxc_nand(&mx35pdk_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); - if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); @@ -595,7 +586,7 @@ static void __init mx35_3ds_init(void) i2c_register_board_info( 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); - imx35_add_ipu_core(&mx35_3ds_ipu_data); + imx35_add_ipu_core(); platform_device_register(&mx35_3ds_ov2640); imx35_3ds_init_camera(); diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 3c5b163923f..9ee84a4af63 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -26,7 +26,6 @@ #include "devices-imx51.h" -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6)) #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static iomux_v3_cfg_t mx51_3ds_pads[] = { @@ -148,13 +147,13 @@ static void __init mx51_3ds_init(void) spi_register_board_info(mx51_3ds_spi_nor_device, ARRAY_SIZE(mx51_3ds_spi_nor_device)); - if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6))) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); imx51_add_sdhci_esdhc_imx(0, NULL); imx51_add_imx_keypad(&mx51_3ds_map_data); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_3ds_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index dde397014d4..7b31cbde877 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -307,18 +307,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init babbage_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", babbage_otg_mode); @@ -411,7 +411,7 @@ static void __init mx51_babbage_init(void) spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 05641980dc5..6c28e65f424 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -135,8 +135,7 @@ static struct resource ard_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), - .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -240,10 +239,12 @@ static void __init mx53_ard_board_init(void) imx53_ard_common_init(); mx53_ard_io_init(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B); + ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B); platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); imx_add_gpio_keys(&ard_button_data); @@ -266,5 +267,6 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") .handle_irq = imx53_handle_irq, .timer = &mx53_ard_timer, .init_machine = mx53_ard_board_init, + .init_late = imx53_init_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index 5a72188b9cd..09fe2197b49 100644 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -154,7 +154,7 @@ static void __init mx53_evk_board_init(void) spi_register_board_info(mx53_evk_spi_board_info, ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); gpio_led_register_device(-1, &mx53evk_leds_data); } @@ -174,5 +174,6 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") .handle_irq = imx53_handle_irq, .timer = &mx53_evk_timer, .init_machine = mx53_evk_board_init, + .init_late = imx53_init_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index 37f67cac15a..8abe23c1d3c 100644 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -283,7 +283,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); if (ret) @@ -316,5 +316,6 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .handle_irq = imx53_handle_irq, .timer = &mx53_loco_timer, .init_machine = mx53_loco_board_init, + .init_late = imx53_init_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 8e972c5c3e1..b15d6a6d3b6 100644 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -138,7 +138,7 @@ static void __init mx53_smd_board_init(void) mx53_smd_init_uart(); mx53_smd_fec_reset(); imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(0, &mx53_smd_i2c_data); imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(1, NULL); @@ -163,5 +163,6 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") .handle_irq = imx53_handle_irq, .timer = &mx53_smd_timer, .init_machine = mx53_smd_board_init, + .init_late = imx53_init_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 8b3d3f07d89..0bf6d30aa32 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -213,13 +213,13 @@ static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = { static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING, - "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq, + IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data); } static void mxt_td60_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOF(8), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 541152e450c..de8516b7d69 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/irqs.h> #include <mach/ulpi.h> #include "devices-imx27.h" @@ -245,7 +244,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, { int ret; - ret = request_irq(IRQ_GPIOC(29), detect_irq, + ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) @@ -257,7 +256,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, static void pca100_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); } static const struct imxmmc_platform_data sdhc_pdata __initconst = { @@ -298,18 +297,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pca100_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pca100_otg_mode); @@ -408,8 +407,8 @@ static void __init pca100_init(void) imx27_add_imx_fb(&pca100_fb_data); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 0a40004154f..e3c45130fb3 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -225,8 +225,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -371,7 +370,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, gpio_direction_input(SDHC1_GPIO_WP); #endif - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) @@ -391,7 +390,7 @@ err_gpio_free: static void pcm970_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data); gpio_free(SDHC1_GPIO_DET); gpio_free(SDHC1_GPIO_WP); } @@ -442,10 +441,6 @@ static struct platform_device *devices[] __initdata = { &pcm037_mt9v022, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static const struct fb_videomode fb_modedb[] = { { /* 240x320 @ 60 Hz Sharp */ @@ -511,8 +506,7 @@ static struct resource pcm970_sja1000_resources[] = { .end = MX31_CS5_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), - .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -557,18 +551,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm037_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm037_otg_mode); @@ -619,13 +613,13 @@ static void __init pcm037_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart_pdata); /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - imx31_add_mxc_w1(NULL); + imx31_add_mxc_w1(); /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); @@ -633,6 +627,10 @@ static void __init pcm037_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); platform_device_register(&pcm037_eth); } @@ -646,7 +644,7 @@ static void __init pcm037_init(void) imx31_add_mxc_nand(&pcm037_nand_board_info); imx31_add_mxc_mmc(0, &sdhc_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ @@ -659,6 +657,10 @@ static void __init pcm037_init(void) pcm037_init_camera(); + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); platform_device_register(&pcm970_sja1000); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2f3debe2a11..95f49d936fd 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -27,6 +27,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -274,7 +275,7 @@ static struct mc13xxx_platform_data pcm038_pmic = { static struct spi_board_info pcm038_spi_board_info[] __initdata = { { .modalias = "mc13783", - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .max_speed_hz = 300000, .bus_num = 0, .chip_select = 0, @@ -325,6 +326,7 @@ static void __init pcm038_init(void) mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); imx27_add_spi_imx0(&pcm038_spi0_data); + pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23)); spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); @@ -332,8 +334,8 @@ static void __init pcm038_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #ifdef CONFIG_MACH_PCM970_BASEBOARD pcm970_baseboard_init(); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 73585f55cca..e4bd4387e34 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -76,10 +76,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Sharp-LQ035Q7", .mode = fb_modedb, @@ -330,18 +326,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_UTMI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm043_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm043_otg_mode); @@ -363,7 +359,7 @@ static void __init pcm043_init(void) imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); @@ -376,7 +372,7 @@ static void __init pcm043_init(void) imx35_add_imx_i2c0(&pcm043_i2c0_data); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 260621055b6..fb25fbd3122 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -51,8 +50,6 @@ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) #define QONG_DNET_SIZE 0x00001000 -#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -78,8 +75,7 @@ static struct resource dnet_resources[] = { .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, .flags = IORESOURCE_MEM, }, { - .start = QONG_FPGA_IRQ, - .end = QONG_FPGA_IRQ, + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -95,6 +91,10 @@ static int __init qong_init_dnet(void) { int ret; + dnet_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); + dnet_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); ret = platform_device_register(&dnet_device); return ret; } @@ -252,7 +252,7 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); } static void __init qong_timer_init(void) diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index cb9ceae2f64..67ff38e9a3c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -14,6 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/interrupt.h> #include <linux/dm9000.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -21,7 +22,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-mx1.h> #include "devices-imx1.h" @@ -78,8 +78,7 @@ static struct resource dm9000x_resources[] = { .end = MX1_CS5_PHYS + 5, .flags = IORESOURCE_MEM, /* data access */ }, { - .start = IRQ_GPIOC(3), - .end = IRQ_GPIOC(3), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -123,6 +122,8 @@ static void __init scb9328_init(void) imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); + dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); + dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index add8c69c6c1..39eb7960e2a 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -31,7 +31,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/irqs.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> @@ -87,10 +86,6 @@ static const struct fb_videomode fb_modedb[] = { } }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "PT0708048", .mode = fb_modedb, @@ -162,7 +157,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { }, { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &vpr200_pmic, - .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), + /* irq number is run-time assigned */ } }; @@ -272,7 +267,7 @@ static void __init vpr200_board_init(void) mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -290,7 +285,7 @@ static void __init vpr200_board_init(void) imx35_add_imx_uart0(NULL); imx35_add_imx_uart2(NULL); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_fsl_usb2_udc(&otg_device_pdata); @@ -299,6 +294,7 @@ static void __init vpr200_board_init(void) imx35_add_mxc_nand(&vpr200_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); + vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, vpr200_i2c_devices, ARRAY_SIZE(vpr200_i2c_devices)); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index fcafd3dafb8..6d60d51868b 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 5f43905e529..d056dad0940 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -26,7 +26,6 @@ #include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> /* MX21 memory map definition */ diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 6ff37140a4f..f3f5c6542ab 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -29,7 +29,6 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/irqs.h> /* * This table defines static virtual address mappings for I/O regions. @@ -90,11 +89,11 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { - /* i.mx25 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); - mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + /* i.mx25 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); pinctrl_provide_dummies(); /* i.mx25 has the i.mx35 type sdma */ diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 25662558e01..e7e24afc45e 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -26,7 +26,6 @@ #include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> /* MX27 memory map definition */ diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index a8983b9778d..9d2c843bde0 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -30,7 +30,6 @@ #include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/irqs.h> #include "crmregs-imx3.h" @@ -273,10 +272,9 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); - /* i.mx35 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); pinctrl_provide_dummies(); if (to_version == 1) { diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 1d003053d56..52d8f534be1 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -16,7 +16,6 @@ #include <linux/clk.h> #include <linux/pinctrl/machine.h> -#include <asm/system_misc.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -24,24 +23,6 @@ #include <mach/devices-common.h> #include <mach/iomux-v3.h> -static struct clk *gpc_dvfs_clk; - -static void imx5_idle(void) -{ - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - return; - clk_prepare(gpc_dvfs_clk); - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (!tzic_enable_wake()) - cpu_do_idle(); - clk_disable(gpc_dvfs_clk); -} - /* * Define the MX50 memory map. */ @@ -105,7 +86,6 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - arm_pm_idle = imx5_idle; } void __init imx53_init_early(void) @@ -181,13 +161,13 @@ static const struct resource imx53_audmux_res[] __initconst = { void __init imx50_soc_init(void) { - /* i.mx50 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); - mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); - mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); + /* i.mx50 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); /* i.mx50 has the i.mx31 type audmux */ platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, @@ -196,11 +176,11 @@ void __init imx50_soc_init(void) void __init imx51_soc_init(void) { - /* i.mx51 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + /* i.mx51 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); pinctrl_provide_dummies(); @@ -218,14 +198,14 @@ void __init imx51_soc_init(void) void __init imx53_soc_init(void) { - /* i.mx53 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); - mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); - mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); - mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + /* i.mx53 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); pinctrl_provide_dummies(); /* i.mx53 has the i.mx35 type sdma */ @@ -243,4 +223,10 @@ void __init imx53_soc_init(void) void __init imx51_init_late(void) { mx51_neon_fixup(); + imx51_pm_init(); +} + +void __init imx53_init_late(void) +{ + imx53_pm_init(); } diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 7d26f766a4e..29e890f9205 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -130,7 +130,8 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_det); gpio_direction_input(gpio_wp); - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), + detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) @@ -151,7 +152,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data); } static const struct imxmmc_platform_data mmc_pdata __initconst = { @@ -161,10 +162,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = { }; /* Framebuffer support */ -static const struct ipu_platform_data ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static const struct fb_videomode fb_modedb = { /* 640x480 TFT panel (IPS-056T) */ .name = "CRT-VGA", @@ -198,7 +195,7 @@ static void __init mx31lilly_init_fb(void) return; } - imx31_add_ipu_core(&ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&fb_pdata); gpio_direction_output(LCD_VCC_EN_GPIO, 1); } diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index bf0fb87946b..83d17d9e0bc 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -116,7 +116,8 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_det); gpio_direction_input(gpio_wp); - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), + detect_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) @@ -137,7 +138,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data); } static const struct imxmmc_platform_data mmc_pdata __initconst = { @@ -191,6 +192,6 @@ void __init mx31lite_db_init(void) imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); gpio_led_register_device(-1, &litekit_led_platform_data); - imx31_add_imx2_wdt(NULL); - imx31_add_mxc_rtc(NULL); + imx31_add_imx2_wdt(); + imx31_add_mxc_rtc(); } diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299..ee870c49bc6 100644 --- a/arch/arm/mach-imx/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c @@ -587,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 0, .platform_data = &mx51_efika_mc13892_data, - .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC), + /* irq number is run-time assigned */ }, }; @@ -620,6 +620,7 @@ void __init efika_board_common_init(void) gpio_request(EFIKAMX_PMIC, "pmic irq"); gpio_direction_input(EFIKAMX_PMIC); + mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC); spi_register_board_info(mx51_efika_spi_board_info, ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata); diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index 99afbc3f43a..9917e2ff51d 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -95,14 +95,14 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void { int ret; - ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, - "imx-mmc-detect", data); + ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); if (ret) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); return ret; } @@ -113,7 +113,7 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void static void pcm970_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); gpio_free(GPIO_PORTC + 28); } @@ -192,8 +192,7 @@ static struct resource pcm970_sja1000_resources[] = { .end = MX27_CS4_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { - .start = IRQ_GPIOE(19), - .end = IRQ_GPIOE(19), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -227,5 +226,7 @@ void __init pcm970_baseboard_init(void) imx27_add_imx_fb(&pcm038_fb_data); mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); imx27_add_mxc_mmc(1, &sdhc_pdata); + pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19)); + pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19)); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index e26a9cb05ed..19621ed1ffa 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -12,19 +12,30 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/err.h> +#include <linux/export.h> #include <asm/cacheflush.h> +#include <asm/system_misc.h> #include <asm/tlbflush.h> #include <mach/common.h> +#include <mach/cpuidle.h> #include <mach/hardware.h> #include "crm-regs-imx5.h" -static struct clk *gpc_dvfs_clk; +/* + * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit. + * This is also the lowest power state possible without affecting + * non-cpu parts of the system. For these reasons, imx5 should default + * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also + * uses this state and needs to take no action when registers remain confgiured + * for this state. + */ +#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF /* * set cpu low power mode before WFI instruction. This function is called * mx5 because it can be used for mx50, mx51, and mx53. */ -void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) +static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; u32 empgc0, empgc1; @@ -87,11 +98,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) } } -static int mx5_suspend_prepare(void) -{ - return clk_prepare_enable(gpc_dvfs_clk); -} - static int mx5_suspend_enter(suspend_state_t state) { switch (state) { @@ -99,7 +105,7 @@ static int mx5_suspend_enter(suspend_state_t state) mx5_cpu_lp_set(STOP_POWER_OFF); break; case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + /* DEFAULT_IDLE_STATE already configured */ break; default: return -EINVAL; @@ -114,12 +120,10 @@ static int mx5_suspend_enter(suspend_state_t state) __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); } cpu_do_idle(); - return 0; -} -static void mx5_suspend_finish(void) -{ - clk_disable_unprepare(gpc_dvfs_clk); + /* return registers to default idle state */ + mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); + return 0; } static int mx5_pm_valid(suspend_state_t state) @@ -129,25 +133,80 @@ static int mx5_pm_valid(suspend_state_t state) static const struct platform_suspend_ops mx5_suspend_ops = { .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, }; -static int __init mx5_pm_init(void) +static inline int imx5_cpu_do_idle(void) +{ + int ret = tzic_enable_wake(); + + if (likely(!ret)) + cpu_do_idle(); + + return ret; +} + +static void imx5_pm_idle(void) +{ + imx5_cpu_do_idle(); +} + +static int imx5_cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx) +{ + int ret; + + ret = imx5_cpu_do_idle(); + if (ret < 0) + return ret; + + return idx; +} + +static struct cpuidle_driver imx5_cpuidle_driver = { + .name = "imx5_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = { + .enter = imx5_cpuidle_enter, + .exit_latency = 2, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IMX5 SRPG", + .desc = "CPU state retained,powered off", + }, + .state_count = 1, +}; + +static int __init imx5_pm_common_init(void) { - if (!cpu_is_mx51() && !cpu_is_mx53()) - return 0; + int ret; + struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + return PTR_ERR(gpc_dvfs_clk); - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; + ret = clk_prepare_enable(gpc_dvfs_clk); + if (ret) + return ret; + arm_pm_idle = imx5_pm_idle; + + /* Set the registers to the default cpu idle state. */ + mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); + + imx_cpuidle_init(&imx5_cpuidle_driver); return 0; } -device_initcall(mx5_pm_init); + +void __init imx51_pm_init(void) +{ + int ret = imx5_pm_common_init(); + if (!ret) + suspend_set_ops(&mx5_suspend_ops); +} + +void __init imx53_pm_init(void) +{ + imx5_pm_common_init(); +} diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index eaf6c6366ff..ebf680bebdf 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -21,7 +21,6 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> -#include <linux/clkdev.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -41,17 +40,17 @@ static struct amba_pl010_data integrator_uart_data; #define KMI0_IRQ { IRQ_KMIINT0 } #define KMI1_IRQ { IRQ_KMIINT1 } -static AMBA_APB_DEVICE(rtc, "mb:15", 0, +static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static AMBA_APB_DEVICE(uart0, "mb:16", 0, +static AMBA_APB_DEVICE(uart0, "uart0", 0, INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static AMBA_APB_DEVICE(uart1, "mb:17", 0, +static AMBA_APB_DEVICE(uart1, "uart1", 0, INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); +static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, @@ -61,50 +60,6 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -/* - * These are fixed clocks. - */ -static struct clk clk24mhz = { - .rate = 24000000, -}; - -static struct clk uartclk = { - .rate = 14745600, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { - /* Integrator/AP timer frequency */ - .dev_id = "ap_timer", - .clk = &clk24mhz, - }, { /* UART0 */ - .dev_id = "mb:16", - .clk = &uartclk, - }, { /* UART1 */ - .dev_id = "mb:17", - .clk = &uartclk, - }, { /* KMI0 */ - .dev_id = "mb:18", - .clk = &clk24mhz, - }, { /* KMI1 */ - .dev_id = "mb:19", - .clk = &clk24mhz, - }, { /* MMCI - IntegratorCP */ - .dev_id = "mb:1c", - .clk = &uartclk, - } -}; - -void __init integrator_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - static int __init integrator_init(void) { int i; diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h deleted file mode 100644 index bfe07679fae..00000000000 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <linux/module.h> -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - struct module *owner; - const struct icst_params *params; - void __iomem *vcoreg; - void *data; -}; - -static inline int __clk_get(struct clk *clk) -{ - return try_module_get(clk->owner); -} - -static inline void __clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index c857501c578..7b1055c8e0b 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/mtd/physmap.h> #include <linux/clk.h> +#include <linux/platform_data/clk-integrator.h> #include <video/vga.h> #include <mach/hardware.h> @@ -174,6 +175,7 @@ static void __init ap_init_irq(void) fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, -1, INTEGRATOR_SC_VALID_INT, NULL); + integrator_clk_init(false); } #ifdef CONFIG_PM @@ -440,6 +442,10 @@ static void integrator_clockevent_init(unsigned long inrate) 0xffffU); } +void __init ap_init_early(void) +{ +} + /* * Set up timer(s). */ @@ -471,7 +477,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .reserve = integrator_reserve, .map_io = ap_map_io, .nr_irqs = NR_IRQS_INTEGRATOR_AP, - .init_early = integrator_init_early, + .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, .timer = &ap_timer, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a56c5360893..82d5c837cc7 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -21,8 +21,8 @@ #include <linux/amba/mmci.h> #include <linux/io.h> #include <linux/gfp.h> -#include <linux/clkdev.h> #include <linux/mtd/physmap.h> +#include <linux/platform_data/clk-integrator.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -171,65 +171,10 @@ static void __init intcp_init_irq(void) fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, IRQ_CP_CPPLDINT, sic_mask, NULL); + integrator_clk_init(true); } /* - * Clock handling - */ -#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) - -static const struct icst_params cp_auxvco_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 8, - .vd_max = 263, - .rd_min = 3, - .rd_max = 65, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void cp_auxvco_set(struct clk *clk, struct icst_vco vco) -{ - u32 val; - - val = readl(clk->vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, CM_LOCK); - writel(val, clk->vcoreg); - writel(0, CM_LOCK); -} - -static const struct clk_ops cp_auxclk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = cp_auxvco_set, -}; - -static struct clk cp_auxclk = { - .ops = &cp_auxclk_ops, - .params = &cp_auxvco_params, - .vcoreg = CM_AUXOSC, -}; - -static struct clk sp804_clk = { - .rate = 1000000, -}; - -static struct clk_lookup cp_lookups[] = { - { /* CLCD */ - .dev_id = "mb:c0", - .clk = &cp_auxclk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .clk = &sp804_clk, - }, -}; - -/* * Flash handling. */ static int intcp_flash_init(struct platform_device *dev) @@ -336,10 +281,10 @@ static struct mmci_platform_data mmc_data = { #define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } #define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, +static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, INTEGRATOR_CP_MMC_IRQS, &mmc_data); -static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, +static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, INTEGRATOR_CP_AACI_IRQS, NULL); @@ -393,7 +338,7 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, +static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { @@ -406,10 +351,6 @@ static struct amba_device *amba_devs[] __initdata = { static void __init intcp_init_early(void) { - clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); - - integrator_init_early(); - #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK versatile_sched_clock_init(REFCOUNTER, 24000000); #endif diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f261cd24264..c9201539ffb 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -67,6 +67,14 @@ void __init kirkwood_map_io(void) * CLK tree ****************************************************************************/ +static void enable_sata0(void) +{ + /* Enable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2); + /* Enable PHY */ + writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL); +} + static void disable_sata0(void) { /* Disable PLL and IVREF */ @@ -75,6 +83,14 @@ static void disable_sata0(void) writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); } +static void enable_sata1(void) +{ + /* Enable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2); + /* Enable PHY */ + writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL); +} + static void disable_sata1(void) { /* Disable PLL and IVREF */ @@ -107,23 +123,38 @@ static void disable_pcie1(void) } } -/* An extended version of the gated clk. This calls fn() before - * disabling the clock. We use this to turn off PHYs etc. */ +/* An extended version of the gated clk. This calls fn_en()/fn_dis + * before enabling/disabling the clock. We use this to turn on/off + * PHYs etc. */ struct clk_gate_fn { struct clk_gate gate; - void (*fn)(void); + void (*fn_en)(void); + void (*fn_dis)(void); }; #define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate) #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) +static int clk_gate_fn_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); + int ret; + + ret = clk_gate_ops.enable(hw); + if (!ret && gate_fn->fn_en) + gate_fn->fn_en(); + + return ret; +} + static void clk_gate_fn_disable(struct clk_hw *hw) { struct clk_gate *gate = to_clk_gate(hw); struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - if (gate_fn->fn) - gate_fn->fn(); + if (gate_fn->fn_dis) + gate_fn->fn_dis(); clk_gate_ops.disable(hw); } @@ -135,7 +166,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock, - void (*fn)(void)) + void (*fn_en)(void), void (*fn_dis)(void)) { struct clk_gate_fn *gate_fn; struct clk *clk; @@ -159,11 +190,14 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; - gate_fn->fn = fn; + gate_fn->fn_en = fn_en; + gate_fn->fn_dis = fn_dis; - /* ops is the gate ops, but with our disable function */ - if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { + /* ops is the gate ops, but with our enable/disable functions */ + if (clk_gate_fn_ops.enable != clk_gate_fn_enable || + clk_gate_fn_ops.disable != clk_gate_fn_disable) { clk_gate_fn_ops = clk_gate_ops; + clk_gate_fn_ops.enable = clk_gate_fn_enable; clk_gate_fn_ops.disable = clk_gate_fn_disable; } @@ -187,11 +221,12 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) static struct clk __init *kirkwood_register_gate_fn(const char *name, u8 bit_idx, - void (*fn)(void)) + void (*fn_en)(void), + void (*fn_dis)(void)) { return clk_register_gate_fn(NULL, name, "tclk", 0, (void __iomem *)CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock, fn); + bit_idx, 0, &gating_lock, fn_en, fn_dis); } static struct clk *ge0, *ge1; @@ -208,18 +243,18 @@ void __init kirkwood_clk_init(void) ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0); ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0, - disable_sata0); + enable_sata0, disable_sata0); sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1, - disable_sata1); + enable_sata1, disable_sata1); usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0); sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO); crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0); xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1); pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0, - disable_pcie0); + NULL, disable_pcie0); pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1, - disable_pcie1); + NULL, disable_pcie1); audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO); kirkwood_register_gate("tdm", CGC_BIT_TDM); kirkwood_register_gate("tsu", CGC_BIT_TSU); @@ -241,6 +276,11 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); + + /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., + * so should never be gated. + */ + clk_prepare_enable(runit); } /***************************************************************************** diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig deleted file mode 100644 index e0b3eee8383..00000000000 --- a/arch/arm/mach-lpc32xx/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if ARCH_LPC32XX - -menu "Individual UART enable selections" - -config ARCH_LPC32XX_UART3_SELECT - bool "Add support for standard UART3" - help - Adds support for standard UART 3 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART4_SELECT - bool "Add support for standard UART4" - help - Adds support for standard UART 4 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART5_SELECT - bool "Add support for standard UART5" - default y - help - Adds support for standard UART 5 when the 8250 serial support - is enabled. - -config ARCH_LPC32XX_UART6_SELECT - bool "Add support for standard UART6" - help - Adds support for standard UART 6 when the 8250 serial support - is enabled. - -endmenu - -endif diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index 2cfe0ee635c..697323b5f92 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -2,3 +2,4 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f6a3ffec1f4..f48c2e961b8 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -607,6 +607,19 @@ static struct clk clk_dma = { .get_rate = local_return_parent_rate, }; +static struct clk clk_pwm = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | + LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | + LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | + LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | + LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | + LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), + .get_rate = local_return_parent_rate, +}; + static struct clk clk_uart3 = { .parent = &clk_pclk, .enable = local_onoff_enable, @@ -691,10 +704,21 @@ static struct clk clk_nand = { .parent = &clk_hclk, .enable = local_onoff_enable, .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN, + .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | + LPC32XX_CLKPWR_NANDCLK_SEL_SLC, .get_rate = local_return_parent_rate, }; +static struct clk clk_nand_mlc = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | + LPC32XX_CLKPWR_NANDCLK_DMA_INT | + LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, + .get_rate = local_return_parent_rate, +}; + static struct clk clk_i2s0 = { .parent = &clk_hclk, .enable = local_onoff_enable, @@ -707,7 +731,8 @@ static struct clk clk_i2s1 = { .parent = &clk_hclk, .enable = local_onoff_enable, .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN, + .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | + LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, .get_rate = local_return_parent_rate, }; @@ -727,14 +752,77 @@ static struct clk clk_rtc = { .get_rate = local_return_parent_rate, }; +static int local_usb_enable(struct clk *clk, int enable) +{ + u32 tmp; + + if (enable) { + /* Set up I2C pull levels */ + tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); + tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; + __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); + } + + return local_onoff_enable(clk, enable); +} + static struct clk clk_usbd = { .parent = &clk_usbpll, - .enable = local_onoff_enable, + .enable = local_usb_enable, .enable_reg = LPC32XX_CLKPWR_USB_CTRL, .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, .get_rate = local_return_parent_rate, }; +#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ + LPC32XX_USB_OTG_I2C_CLOCK_ON) + +static int local_usb_otg_enable(struct clk *clk, int enable) +{ + int to = 1000; + + if (enable) { + __raw_writel(clk->enable_mask, clk->enable_reg); + + while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & + clk->enable_mask) != clk->enable_mask) && (to > 0)) + to--; + } else { + __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); + + while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & + OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) + to--; + } + + if (to) + return 0; + else + return -1; +} + +static struct clk clk_usb_otg_dev = { + .parent = &clk_usbpll, + .enable = local_usb_otg_enable, + .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, + .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | + LPC32XX_USB_OTG_OTG_CLOCK_ON | + LPC32XX_USB_OTG_DEV_CLOCK_ON | + LPC32XX_USB_OTG_I2C_CLOCK_ON, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_usb_otg_host = { + .parent = &clk_usbpll, + .enable = local_usb_otg_enable, + .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, + .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | + LPC32XX_USB_OTG_OTG_CLOCK_ON | + LPC32XX_USB_OTG_HOST_CLOCK_ON | + LPC32XX_USB_OTG_I2C_CLOCK_ON, + .get_rate = local_return_parent_rate, +}; + static int tsc_onoff_enable(struct clk *clk, int enable) { u32 tmp; @@ -800,11 +888,17 @@ static int mmc_onoff_enable(struct clk *clk, int enable) u32 tmp; tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | + LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); /* If rate is 0, disable clock */ if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | + LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); @@ -853,7 +947,7 @@ static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) static int mmc_set_rate(struct clk *clk, unsigned long rate) { - u32 oldclk, tmp; + u32 tmp; unsigned long prate, div, crate = mmc_round_rate(clk, rate); prate = clk->parent->get_rate(clk->parent); @@ -861,16 +955,12 @@ static int mmc_set_rate(struct clk *clk, unsigned long rate) div = prate / crate; /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div); + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | + LPC32XX_CLKPWR_MSCARD_SDCARD_EN; __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - return 0; } @@ -1111,6 +1201,7 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), + CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), @@ -1120,8 +1211,9 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan), - CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand), + CLKDEV_INIT("40050000.key", NULL, &clk_kscan), + CLKDEV_INIT("20020000.flash", NULL, &clk_nand), + CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), CLKDEV_INIT("40048000.adc", NULL, &clk_adc), CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), @@ -1130,6 +1222,9 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), + CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), + CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), + CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), }; diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 5c96057b6d7..a48dc2dec48 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <asm/mach/map.h> +#include <asm/system_info.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -224,7 +225,7 @@ void lpc23xx_restart(char mode, const char *cmd) ; } -static int __init lpc32xx_display_uid(void) +static int __init lpc32xx_check_uid(void) { u32 uid[4]; @@ -233,6 +234,11 @@ static int __init lpc32xx_display_uid(void) printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", uid[3], uid[2], uid[1], uid[0]); + if (!system_serial_low && !system_serial_high) { + system_serial_low = uid[0]; + system_serial_high = uid[1]; + } + return 1; } -arch_initcall(lpc32xx_display_uid); +arch_initcall(lpc32xx_check_uid); diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 2ba6ca412be..0052e7a7617 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -3,6 +3,4 @@ #include "gpio-lpc32xx.h" -#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX) - #endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index c584f5bb164..acc4aabf1c7 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -694,4 +694,18 @@ #define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) #define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) +/* + * USB Otg Registers + */ +#define _OTGREG(x) io_p2v(LPC32XX_USB_OTG_BASE + (x)) +#define LPC32XX_USB_OTG_CLK_CTRL _OTGREG(0xFF4) +#define LPC32XX_USB_OTG_CLK_STAT _OTGREG(0xFF8) + +/* USB OTG CLK CTRL bit defines */ +#define LPC32XX_USB_OTG_AHB_M_CLOCK_ON _BIT(4) +#define LPC32XX_USB_OTG_OTG_CLOCK_ON _BIT(3) +#define LPC32XX_USB_OTG_I2C_CLOCK_ON _BIT(2) +#define LPC32XX_USB_OTG_DEV_CLOCK_ON _BIT(1) +#define LPC32XX_USB_OTG_HOST_CLOCK_ON _BIT(0) + #endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 540106cdb9e..b07dcc90829 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -30,12 +30,13 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/amba/mmci.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> -#include <linux/amba/pl08x.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -50,9 +51,9 @@ /* * Mapped GPIOLIB GPIOs */ -#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) +#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) /* * AMBA LCD controller @@ -158,24 +159,6 @@ static struct clcd_board lpc32xx_clcd_data = { /* * AMBA SSP (SPI) */ -static void phy3250_spi_cs_set(u32 control) -{ - gpio_set_value(SPI0_CS_GPIO, (int) control); -} - -static struct pl022_config_chip spi0_chip_info = { - .com_mode = INTERRUPT_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - .hierarchy = SSP_MASTER, - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_8, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - .cs_control = phy3250_spi_cs_set, -}; - static struct pl022_ssp_controller lpc32xx_ssp0_data = { .bus_id = 0, .num_chipselect = 1, @@ -188,45 +171,56 @@ static struct pl022_ssp_controller lpc32xx_ssp1_data = { .enable_dma = 0, }; -/* AT25 driver registration */ -static int __init phy3250_spi_board_register(void) +static struct pl08x_channel_data pl08x_slave_channels[] = { + { + .bus_id = "nand-slc", + .min_signal = 1, /* SLC NAND Flash */ + .max_signal = 1, + .periph_buses = PL08X_AHB1, + }, + { + .bus_id = "nand-mlc", + .min_signal = 12, /* MLC NAND Flash */ + .max_signal = 12, + .periph_buses = PL08X_AHB1, + }, +}; + +static int pl08x_get_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch) { -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) - static struct spi_board_info info[] = { - { - .modalias = "spidev", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 0, - .controller_data = &spi0_chip_info, - }, - }; - -#else - static struct spi_eeprom eeprom = { - .name = "at25256a", - .byte_len = 0x8000, - .page_size = 64, - .flags = EE_ADDR2, - }; - - static struct spi_board_info info[] = { - { - .modalias = "at25", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - .platform_data = &eeprom, - .controller_data = &spi0_chip_info, - }, - }; -#endif - return spi_register_board_info(info, ARRAY_SIZE(info)); } -arch_initcall(phy3250_spi_board_register); static struct pl08x_platform_data pl08x_pd = { + .slave_channels = &pl08x_slave_channels[0], + .num_slave_channels = ARRAY_SIZE(pl08x_slave_channels), + .get_signal = pl08x_get_signal, + .put_signal = pl08x_put_signal, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, +}; + +static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) +{ + /* Only on and off are supported */ + if (ios->power_mode == MMC_POWER_OFF) + gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); + else + gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); + return 0; +} + +static struct mmci_platform_data lpc32xx_mmci_data = { + .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .ios_handler = mmc_handle_ios, + .dma_filter = NULL, + /* No DMA for now since AMBA PL080 dmaengine driver only does scatter + * gather, and the MMCI driver doesn't do it this way */ }; static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { @@ -234,6 +228,8 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), + OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", + &lpc32xx_mmci_data), { } }; @@ -241,10 +237,6 @@ static void __init lpc3250_machine_init(void) { u32 tmp; - /* Setup SLC NAND controller muxing */ - __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - LPC32XX_CLKPWR_NAND_CLK_CTRL); - /* Setup LCD muxing to RGB565 */ tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | @@ -252,47 +244,8 @@ static void __init lpc3250_machine_init(void) tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); - /* Set up USB power */ - tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN | - LPC32XX_CLKPWR_USBCTRL_USBI2C_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL); - - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE | - LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - - /* Disable IrDA pulsing support on UART6 */ - tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); - tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS; - __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); - - /* Enable DMA for I2S1 channel */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL); - tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA; - __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL); - lpc32xx_serial_init(); - /* - * AMBA peripheral clocks need to be enabled prior to AMBA device - * detection or a data fault will occur, so enable the clocks - * here. - */ - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN), - LPC32XX_CLKPWR_SSP_CLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN), - LPC32XX_CLKPWR_DMA_CLK_CTRL); - /* Test clock needed for UDA1380 initial init */ __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, @@ -302,12 +255,10 @@ static void __init lpc3250_machine_init(void) lpc32xx_auxdata_lookup, NULL); /* Register GPIOs used on this board */ - if (gpio_request(SPI0_CS_GPIO, "spi0 cs")) - printk(KERN_ERR "Error requesting gpio %u", - SPI0_CS_GPIO); - else if (gpio_direction_output(SPI0_CS_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - SPI0_CS_GPIO); + if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en")) + pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO); + else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1)) + pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO); } static char const *lpc32xx_dt_compat[] __initdata = { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index f2735281616..05621a29fba 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -31,59 +31,6 @@ #define LPC32XX_SUART_FIFO_SIZE 64 -/* Standard 8250/16550 compatible serial ports */ -static struct plat_serial8250_port serial_std_platform_data[] = { -#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT - { - .membase = io_p2v(LPC32XX_UART5_BASE), - .mapbase = LPC32XX_UART5_BASE, - .irq = IRQ_LPC32XX_UART_IIR5, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT - { - .membase = io_p2v(LPC32XX_UART3_BASE), - .mapbase = LPC32XX_UART3_BASE, - .irq = IRQ_LPC32XX_UART_IIR3, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT - { - .membase = io_p2v(LPC32XX_UART4_BASE), - .mapbase = LPC32XX_UART4_BASE, - .irq = IRQ_LPC32XX_UART_IIR4, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT - { - .membase = io_p2v(LPC32XX_UART6_BASE), - .mapbase = LPC32XX_UART6_BASE, - .irq = IRQ_LPC32XX_UART_IIR6, - .uartclk = LPC32XX_MAIN_OSC_FREQ, - .regshift = 2, - .iotype = UPIO_MEM32, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | - UPF_SKIP_TEST, - }, -#endif - { }, -}; - struct uartinit { char *uart_ck_name; u32 ck_mode_mask; @@ -92,7 +39,6 @@ struct uartinit { }; static struct uartinit uartinit_data[] __initdata = { -#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT { .uart_ck_name = "uart5_ck", .ck_mode_mask = @@ -100,8 +46,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, .mapbase = LPC32XX_UART5_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT { .uart_ck_name = "uart3_ck", .ck_mode_mask = @@ -109,8 +53,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, .mapbase = LPC32XX_UART3_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT { .uart_ck_name = "uart4_ck", .ck_mode_mask = @@ -118,8 +60,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, .mapbase = LPC32XX_UART4_BASE, }, -#endif -#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT { .uart_ck_name = "uart6_ck", .ck_mode_mask = @@ -127,19 +67,6 @@ static struct uartinit uartinit_data[] __initdata = { .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, .mapbase = LPC32XX_UART6_BASE, }, -#endif -}; - -static struct platform_device serial_std_platform_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_std_platform_data, - }, -}; - -static struct platform_device *lpc32xx_serial_devs[] __initdata = { - &serial_std_platform_device, }; void __init lpc32xx_serial_init(void) @@ -156,15 +83,8 @@ void __init lpc32xx_serial_init(void) clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { clk_enable(clk); - serial_std_platform_data[i].uartclk = - clk_get_rate(clk); } - /* Fall back on main osc rate if clock rate return fails */ - if (serial_std_platform_data[i].uartclk == 0) - serial_std_platform_data[i].uartclk = - LPC32XX_MAIN_OSC_FREQ; - /* Setup UART clock modes for all UARTs, disable autoclock */ clkmodes |= uartinit_data[i].ck_mode_mask; @@ -189,7 +109,7 @@ void __init lpc32xx_serial_init(void) __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ - puart = serial_std_platform_data[i].mapbase; + puart = uartinit_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); j = LPC32XX_SUART_FIFO_SIZE; @@ -198,11 +118,13 @@ void __init lpc32xx_serial_init(void) __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } + /* Disable IrDA pulsing support on UART6 */ + tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); + tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS; + __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); + /* Disable UART5->USB transparent mode or USB won't work */ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB; __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); - - platform_add_devices(lpc32xx_serial_devs, - ARRAY_SIZE(lpc32xx_serial_devs)); } diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index db0117ec55f..e012dc8391c 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -127,7 +127,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig new file mode 100644 index 00000000000..caa2c5e734f --- /dev/null +++ b/arch/arm/mach-mvebu/Kconfig @@ -0,0 +1,16 @@ +if ARCH_MVEBU + +menu "Marvell SOC with device tree" + +config MACH_ARMADA_370_XP + bool "Marvell Armada 370 and Aramada XP boards" + select ARMADA_370_XP_TIMER + select CPU_V7 + help + + Say 'Y' here if you want your kernel to support boards based on + Marvell Armada 370 or Armada XP with device tree. + +endmenu + +endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile new file mode 100644 index 00000000000..e61d2b8fdf5 --- /dev/null +++ b/arch/arm/mach-mvebu/Makefile @@ -0,0 +1,2 @@ +obj-y += system-controller.o +obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot new file mode 100644 index 00000000000..2579a2fc233 --- /dev/null +++ b/arch/arm/mach-mvebu/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb +dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c new file mode 100644 index 00000000000..4ef923b032e --- /dev/null +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -0,0 +1,63 @@ +/* + * Device Tree support for Armada 370 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/time-armada-370-xp.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <mach/armada-370-xp.h> +#include "common.h" + +static struct map_desc armada_370_xp_io_desc[] __initdata = { + { + .virtual = ARMADA_370_XP_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE), + .length = ARMADA_370_XP_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init armada_370_xp_map_io(void) +{ + iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc)); +} + +struct sys_timer armada_370_xp_timer = { + .init = armada_370_xp_timer_init, +}; + +static void __init armada_370_xp_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const armada_370_xp_dt_board_dt_compat[] = { + "marvell,a370-db", + "marvell,axp-db", + NULL, +}; + +DT_MACHINE_START(ARMADA_XP_DT, "Marvell Aramada 370/XP (Device Tree)") + .init_machine = armada_370_xp_dt_init, + .map_io = armada_370_xp_map_io, + .init_irq = armada_370_xp_init_irq, + .handle_irq = armada_370_xp_handle_irq, + .timer = &armada_370_xp_timer, + .restart = mvebu_restart, + .dt_compat = armada_370_xp_dt_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h new file mode 100644 index 00000000000..02f89eaa25f --- /dev/null +++ b/arch/arm/mach-mvebu/common.h @@ -0,0 +1,23 @@ +/* + * Core functions for Marvell System On Chip + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_MVEBU_COMMON_H +#define __ARCH_MVEBU_COMMON_H + +void mvebu_restart(char mode, const char *cmd); + +void armada_370_xp_init_irq(void); +void armada_370_xp_handle_irq(struct pt_regs *regs); + +#endif diff --git a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h new file mode 100644 index 00000000000..25f0ca8d782 --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h @@ -0,0 +1,22 @@ +/* + * Generic definitions for Marvell Armada_370_XP SoCs + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_ARMADA_370_XP_H +#define __MACH_ARMADA_370_XP_H + +#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 +#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 +#define ARMADA_370_XP_REGS_SIZE SZ_1M + +#endif /* __MACH_ARMADA_370_XP_H */ diff --git a/arch/arm/mach-mvebu/include/mach/debug-macro.S b/arch/arm/mach-mvebu/include/mach/debug-macro.S new file mode 100644 index 00000000000..22825760c7e --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/debug-macro.S @@ -0,0 +1,24 @@ +/* + * Early serial output macro for Marvell SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/armada-370-xp.h> + + .macro addruart, rp, rv, tmp + ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE + ldr \rv, =ARMADA_370_XP_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mvebu/include/mach/timex.h b/arch/arm/mach-mvebu/include/mach/timex.h new file mode 100644 index 00000000000..ab324a3748f --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/timex.h @@ -0,0 +1,13 @@ +/* + * Marvell Armada SoC time definitions + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-mvebu/include/mach/uncompress.h b/arch/arm/mach-mvebu/include/mach/uncompress.h new file mode 100644 index 00000000000..d6a100ccf30 --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/uncompress.h @@ -0,0 +1,43 @@ +/* + * Marvell Armada SoC kernel uncompression UART routines + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/armada-370-xp.h> + +#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\ + + 0x12000)) +#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\ + + 0x12014)) + +#define LSR_THRE 0x20 + +static void putc(const char c) +{ + int i; + + for (i = 0; i < 0x1000; i++) { + /* Transmit fifo not full? */ + if (*UART_LSR & LSR_THRE) + break; + } + + *UART_THR = c; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c new file mode 100644 index 00000000000..5f5f9394b6b --- /dev/null +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -0,0 +1,133 @@ +/* + * Marvell Armada 370 and Armada XP SoC IRQ handling + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Ben Dooks <ben.dooks@codethink.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <asm/mach/arch.h> +#include <asm/exception.h> + +/* Interrupt Controller Registers Map */ +#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48) +#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C) + +#define ARMADA_370_XP_INT_CONTROL (0x00) +#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) +#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) + +#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) + +static void __iomem *per_cpu_int_base; +static void __iomem *main_int_base; +static struct irq_domain *armada_370_xp_mpic_domain; + +static void armada_370_xp_irq_mask(struct irq_data *d) +{ + writel(irqd_to_hwirq(d), + per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); +} + +static void armada_370_xp_irq_unmask(struct irq_data *d) +{ + writel(irqd_to_hwirq(d), + per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); +} + +static struct irq_chip armada_370_xp_irq_chip = { + .name = "armada_370_xp_irq", + .irq_mask = armada_370_xp_irq_mask, + .irq_mask_ack = armada_370_xp_irq_mask, + .irq_unmask = armada_370_xp_irq_unmask, +}; + +static int armada_370_xp_mpic_irq_map(struct irq_domain *h, + unsigned int virq, irq_hw_number_t hw) +{ + armada_370_xp_irq_mask(irq_get_irq_data(virq)); + writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); + + irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, + handle_level_irq); + irq_set_status_flags(virq, IRQ_LEVEL); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops armada_370_xp_mpic_irq_ops = { + .map = armada_370_xp_mpic_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init armada_370_xp_mpic_of_init(struct device_node *node, + struct device_node *parent) +{ + u32 control; + + main_int_base = of_iomap(node, 0); + per_cpu_int_base = of_iomap(node, 1); + + BUG_ON(!main_int_base); + BUG_ON(!per_cpu_int_base); + + control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); + + armada_370_xp_mpic_domain = + irq_domain_add_linear(node, (control >> 2) & 0x3ff, + &armada_370_xp_mpic_irq_ops, NULL); + + if (!armada_370_xp_mpic_domain) + panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); + + irq_set_default_host(armada_370_xp_mpic_domain); + return 0; +} + +asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs + *regs) +{ + u32 irqstat, irqnr; + + do { + irqstat = readl_relaxed(per_cpu_int_base + + ARMADA_370_XP_CPU_INTACK_OFFS); + irqnr = irqstat & 0x3FF; + + if (irqnr < 1023) { + irqnr = + irq_find_mapping(armada_370_xp_mpic_domain, irqnr); + handle_IRQ(irqnr, regs); + continue; + } + + break; + } while (1); +} + +static const struct of_device_id mpic_of_match[] __initconst = { + {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init}, + {}, +}; + +void __init armada_370_xp_init_irq(void) +{ + of_irq_init(mpic_of_match); +} diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c new file mode 100644 index 00000000000..b8079df8c98 --- /dev/null +++ b/arch/arm/mach-mvebu/system-controller.c @@ -0,0 +1,105 @@ +/* + * System controller support for Armada 370 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Armada 370 and Armada XP SoCs both have a range of + * miscellaneous registers, that do not belong to a particular device, + * but rather provide system-level features. This basic + * system-controller driver provides a device tree binding for those + * registers, and implements utility functions offering various + * features related to those registers. + * + * For now, the feature set is limited to restarting the platform by a + * soft-reset, but it might be extended in the future. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> + +static void __iomem *system_controller_base; + +struct mvebu_system_controller { + u32 rstoutn_mask_offset; + u32 system_soft_reset_offset; + + u32 rstoutn_mask_reset_out_en; + u32 system_soft_reset; +}; +static struct mvebu_system_controller *mvebu_sc; + +const struct mvebu_system_controller armada_370_xp_system_controller = { + .rstoutn_mask_offset = 0x60, + .system_soft_reset_offset = 0x64, + .rstoutn_mask_reset_out_en = 0x1, + .system_soft_reset = 0x1, +}; + +const struct mvebu_system_controller orion_system_controller = { + .rstoutn_mask_offset = 0x108, + .system_soft_reset_offset = 0x10c, + .rstoutn_mask_reset_out_en = 0x4, + .system_soft_reset = 0x1, +}; + +static struct of_device_id of_system_controller_table[] = { + { + .compatible = "marvell,orion-system-controller", + .data = (void *) &orion_system_controller, + }, { + .compatible = "marvell,armada-370-xp-system-controller", + .data = (void *) &armada_370_xp_system_controller, + }, + { /* end of list */ }, +}; + +void mvebu_restart(char mode, const char *cmd) +{ + if (!system_controller_base) { + pr_err("Cannot restart, system-controller not available: check the device tree\n"); + } else { + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(mvebu_sc->rstoutn_mask_reset_out_en, + system_controller_base + + mvebu_sc->rstoutn_mask_offset); + /* + * Assert soft reset. + */ + writel(mvebu_sc->system_soft_reset, + system_controller_base + + mvebu_sc->system_soft_reset_offset); + } + + while (1) + ; +} + +static int __init mvebu_system_controller_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, of_system_controller_table); + if (np) { + const struct of_device_id *match = + of_match_node(of_system_controller_table, np); + BUG_ON(!match); + system_controller_base = of_iomap(np, 0); + mvebu_sc = (struct mvebu_system_controller *)match->data; + } + + return 0; +} + +arch_initcall(mvebu_system_controller_init); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 91cf0625819..ccdf83b17cf 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,6 +16,7 @@ config SOC_IMX28 bool select ARM_AMBA select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index 07b11fe6453..4582999cf08 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -1 +1,10 @@ zreladdr-y += 0x40008000 + +dtb-y += imx23-evk.dtb \ + imx23-olinuxino.dtb \ + imx23-stmp378x_devb.dtb \ + imx28-apx4devkit.dtb \ + imx28-cfa10036.dtb \ + imx28-evk.dtb \ + imx28-m28evk.dtb \ + imx28-tx28.dtb \ diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 9acdd638704..9ee5cede3d4 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -10,7 +10,7 @@ */ #include <mach/mx23.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #include <linux/amba/bus.h> static inline int mx23_add_duart(void) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 84b2960df11..fcab431060f 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -10,7 +10,7 @@ */ #include <mach/mx28.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #include <linux/amba/bus.h> static inline int mx28_add_duart(void) diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c index 5a75b7180f7..76b53f73418 100644 --- a/arch/arm/mach-mxs/devices/platform-mxsfb.c +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -10,7 +10,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> #include <mach/devices-common.h> -#include <mach/mxsfb.h> +#include <linux/mxsfb.h> #ifdef CONFIG_SOC_IMX23 struct platform_device *__init mx23_add_mxsfb( diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h deleted file mode 100644 index e4d79791515..00000000000 --- a/arch/arm/mach-mxs/include/mach/mxsfb.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_FB_H -#define __MACH_FB_H - -#include <linux/fb.h> - -#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ -#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ -#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ -#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ - -#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) -#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ - -struct mxsfb_platform_data { - struct fb_videomode *mode_list; - unsigned mode_count; - - unsigned default_bpp; - - unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ - unsigned ld_intf_width; /* refer STMLCDIF_* macros */ - - unsigned fb_size; /* Size of the video memory. If zero a - * default will be used - */ - unsigned long fb_phys; /* physical address for the video memory. If - * zero the framebuffer memory will be dynamically - * allocated. If specified,fb_size must also be specified. - * fb_phys must be unused by Linux. - */ -}; - -#endif /* __MACH_FB_H */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8cac94b3302..8dabfe81d07 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -16,12 +16,95 @@ #include <linux/init.h> #include <linux/init.h> #include <linux/irqdomain.h> +#include <linux/micrel_phy.h> +#include <linux/mxsfb.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/phy.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> +static struct fb_videomode mx23evk_video_modes[] = { + { + .name = "Samsung-LMS430HF02", + .refresh = 60, + .xres = 480, + .yres = 272, + .pixclock = 108096, /* picosecond (9.2 MHz) */ + .left_margin = 15, + .right_margin = 8, + .upper_margin = 12, + .lower_margin = 4, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct fb_videomode mx28evk_video_modes[] = { + { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct fb_videomode m28evk_video_modes[] = { + { + .name = "Ampire AM-800480R2TMQW-T01H", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30066, /* picosecond (33.26 MHz) */ + .left_margin = 0, + .right_margin = 256, + .upper_margin = 0, + .lower_margin = 45, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, + }, +}; + +static struct fb_videomode apx4devkit_video_modes[] = { + { + .name = "HannStar PJ70112A", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33333, /* picosecond (30.00 MHz) */ + .left_margin = 88, + .right_margin = 40, + .upper_margin = 32, + .lower_margin = 13, + .hsync_len = 48, + .vsync_len = 3, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | + FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + +static struct mxsfb_platform_data mxsfb_pdata __initdata; + +static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), + OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), + { /* sentinel */ } +}; + static int __init mxs_icoll_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { @@ -71,33 +154,151 @@ static struct sys_timer imx28_timer = { .init = imx28_timer_init, }; -static void __init imx28_evk_init(void) +enum mac_oui { + OUI_FSL, + OUI_DENX, +}; + +static void __init update_fec_mac_prop(enum mac_oui oui) +{ + struct device_node *np, *from = NULL; + struct property *newmac; + const u32 *ocotp = mxs_get_ocotp(); + u8 *macaddr; + u32 val; + int i; + + for (i = 0; i < 2; i++) { + np = of_find_compatible_node(from, NULL, "fsl,imx28-fec"); + if (!np) + return; + from = np; + + newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); + if (!newmac) + return; + newmac->value = newmac + 1; + newmac->length = 6; + + newmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!newmac->name) { + kfree(newmac); + return; + } + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code OUI here. + */ + macaddr = newmac->value; + switch (oui) { + case OUI_FSL: + macaddr[0] = 0x00; + macaddr[1] = 0x04; + macaddr[2] = 0x9f; + break; + case OUI_DENX: + macaddr[0] = 0xc0; + macaddr[1] = 0xe5; + macaddr[2] = 0x4e; + break; + } + val = ocotp[i]; + macaddr[3] = (val >> 16) & 0xff; + macaddr[4] = (val >> 8) & 0xff; + macaddr[5] = (val >> 0) & 0xff; + + prom_update_property(np, newmac); + } +} + +static void __init imx23_evk_init(void) +{ + mxsfb_pdata.mode_list = mx23evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + +static inline void enable_clk_enet_out(void) { - struct clk *clk; + struct clk *clk = clk_get_sys("enet_out", NULL); - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); if (!IS_ERR(clk)) clk_prepare_enable(clk); } +static void __init imx28_evk_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_FSL); + + mxsfb_pdata.mode_list = mx28evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + +static void __init m28evk_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_DENX); + + mxsfb_pdata.mode_list = m28evk_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); + mxsfb_pdata.default_bpp = 16; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; +} + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + enable_clk_enet_out(); + + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mxsfb_pdata.mode_list = apx4devkit_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; +} + static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); + else if (of_machine_is_compatible("fsl,imx23-evk")) + imx23_evk_init(); + else if (of_machine_is_compatible("denx,m28evk")) + m28evk_init(); + else if (of_machine_is_compatible("bluegiga,apx4devkit")) + apx4devkit_init(); of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); + mxs_auxdata_lookup, NULL); } static const char *imx23_dt_compat[] __initdata = { "fsl,imx23-evk", + "fsl,stmp378x_devb" + "olimex,imx23-olinuxino", "fsl,imx23", NULL, }; static const char *imx28_dt_compat[] __initdata = { + "bluegiga,apx4devkit", + "crystalfontz,cfa10036", + "denx,m28evk", "fsl,imx28-evk", + "karo,tx28", "fsl,imx28", NULL, }; diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 9a7b08b2a92..0f71f82101c 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -11,7 +11,7 @@ #include <linux/gpio.h> #include <mach/iomux-mx28.h> -#include "../devices-mx28.h" +#include "devices-mx28.h" #include "module-tx28.h" diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 2cdf6ef69be..d122ee6ab99 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -69,29 +69,6 @@ void netx_clcd_remove(struct clcd_fb *fb) fb->fb.screen_base, fb->fb.fix.smem_start); } -void clk_disable(struct clk *clk) -{ -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -int clk_enable(struct clk *clk) -{ - return 0; -} - -struct clk *clk_get(struct device *dev, const char *id) -{ - return dev && strcmp(dev_name(dev), "fb") == 0 ? NULL : ERR_PTR(-ENOENT); -} - -void clk_put(struct clk *clk) -{ -} - static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index a6bbd1a7b4e..a42c9a33d3b 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,8 +7,6 @@ # Object file lists. -obj-y += clock.o - # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 2e8d3e176bc..f4535a7dadf 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -14,12 +14,14 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> +#include <linux/amba/mmci.h> #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> +#include <linux/i2c.h> #include <linux/io.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> @@ -185,16 +187,28 @@ static void __init nhk8815_onenand_init(void) #endif } -static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, - { IRQ_UART0 }, NULL); +static struct mmci_platform_data mmcsd_plat_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 48000000, + .gpio_wp = -1, + .gpio_cd = 111, + .cd_invert = true, + .capabilities = MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA, +}; -static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, - { IRQ_UART1 }, NULL); +static int __init nhk8815_mmcsd_init(void) +{ + int ret; -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, -}; + ret = gpio_request(112, "card detect bias"); + if (ret) + return ret; + gpio_direction_output(112, 0); + amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180); + return 0; +} +module_init(nhk8815_mmcsd_init); static struct resource nhk8815_eth_resources[] = { { @@ -253,17 +267,46 @@ static struct sys_timer nomadik_timer = { .init = nomadik_timer_init, }; +static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = { + { + I2C_BOARD_INFO("stw4811", 0x2d), + }, +}; + +static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = { + { + I2C_BOARD_INFO("camera", 0x10), + }, + { + I2C_BOARD_INFO("stw5095", 0x1a), + }, + { + I2C_BOARD_INFO("lis3lv02dl", 0x1d), + }, +}; + +static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = { + { + I2C_BOARD_INFO("stw4811-usb", 0x2d), + }, +}; + static void __init nhk8815_platform_init(void) { - int i; - cpu8815_platform_init(); nhk8815_onenand_init(); platform_add_devices(nhk8815_platform_devices, ARRAY_SIZE(nhk8815_platform_devices)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); + amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0); + amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0); + + i2c_register_board_info(0, nhk8815_i2c0_devices, + ARRAY_SIZE(nhk8815_i2c0_devices)); + i2c_register_board_info(1, nhk8815_i2c1_devices, + ARRAY_SIZE(nhk8815_i2c1_devices)); + i2c_register_board_info(2, nhk8815_i2c2_devices, + ARRAY_SIZE(nhk8815_i2c2_devices)); } MACHINE_START(NOMADIK, "NHK8815") diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c deleted file mode 100644 index 48a59f24e10..00000000000 --- a/arch/arm/mach-nomadik/clock.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/clock.c - * - * Copyright (C) 2009 Alessandro Rubini - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include "clock.h" - -/* - * The nomadik board uses generic clocks, but the serial pl011 file - * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/* enable and disable do nothing */ -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -static struct clk clk_24 = { - .rate = 2400000, -}; - -static struct clk clk_48 = { - .rate = 48 * 1000 * 1000, -}; - -/* - * Catch-all default clock to satisfy drivers using the clk API. We don't - * model the actual hardware clocks yet. - */ -static struct clk clk_default; - -#define CLK(_clk, dev) \ - { \ - .clk = _clk, \ - .dev_id = dev, \ - } - -static struct clk_lookup lookups[] = { - { - .con_id = "apb_pclk", - .clk = &clk_default, - }, - CLK(&clk_24, "mtu0"), - CLK(&clk_24, "mtu1"), - CLK(&clk_48, "uart0"), - CLK(&clk_48, "uart1"), - CLK(&clk_default, "gpio.0"), - CLK(&clk_default, "gpio.1"), - CLK(&clk_default, "gpio.2"), - CLK(&clk_default, "gpio.3"), - CLK(&clk_default, "rng"), -}; - -int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; -} diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h deleted file mode 100644 index 78da2e7c398..00000000000 --- a/arch/arm/mach-nomadik/clock.h +++ /dev/null @@ -1,15 +0,0 @@ - -/* - * linux/arch/arm/mach-nomadik/clock.h - * - * Copyright (C) 2009 Alessandro Rubini - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct clk { - unsigned long rate; -}; - -int __init clk_init(void); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 27f43a46985..6fd8e46567a 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -22,6 +22,10 @@ #include <linux/amba/bus.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <linux/platform_data/clk-nomadik.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> @@ -32,91 +36,63 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include "clock.h" #include "cpu-8815.h" -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - /* The 8815 has 4 GPIO blocks, let's register them immediately */ - -#define GPIO_RESOURCE(block) \ - { \ - .start = NOMADIK_GPIO##block##_BASE, \ - .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = IRQ_GPIO##block, \ - .end = IRQ_GPIO##block, \ - .flags = IORESOURCE_IRQ, \ - } - -#define GPIO_DEVICE(block) \ - { \ - .name = "gpio", \ - .id = block, \ - .num_resources = 2, \ - .resource = &cpu8815_gpio_resources[block * 2], \ - .dev = { \ - .platform_data = &cpu8815_gpio[block], \ - }, \ - } - -static struct nmk_gpio_platform_data cpu8815_gpio[] = { - { - .name = "GPIO-0-31", - .first_gpio = 0, - .first_irq = NOMADIK_GPIO_TO_IRQ(0), - }, { - .name = "GPIO-32-63", - .first_gpio = 32, - .first_irq = NOMADIK_GPIO_TO_IRQ(32), - }, { - .name = "GPIO-64-95", - .first_gpio = 64, - .first_irq = NOMADIK_GPIO_TO_IRQ(64), - }, { - .name = "GPIO-96-127", /* 124..127 not routed to pin */ - .first_gpio = 96, - .first_irq = NOMADIK_GPIO_TO_IRQ(96), - } +static resource_size_t __initdata cpu8815_gpio_base[] = { + NOMADIK_GPIO0_BASE, + NOMADIK_GPIO1_BASE, + NOMADIK_GPIO2_BASE, + NOMADIK_GPIO3_BASE, }; -static struct resource cpu8815_gpio_resources[] = { - GPIO_RESOURCE(0), - GPIO_RESOURCE(1), - GPIO_RESOURCE(2), - GPIO_RESOURCE(3), -}; - -static struct platform_device cpu8815_platform_gpio[] = { - GPIO_DEVICE(0), - GPIO_DEVICE(1), - GPIO_DEVICE(2), - GPIO_DEVICE(3), -}; +static struct platform_device * +cpu8815_add_gpio(int id, resource_size_t addr, int irq, + struct nmk_gpio_platform_data *pdata) +{ + struct resource resources[] = { + { + .start = addr, + .end = addr + 127, + .flags = IORESOURCE_MEM, + }, + { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + } + }; + + return platform_device_register_resndata(NULL, "gpio", id, + resources, ARRAY_SIZE(resources), + pdata, sizeof(*pdata)); +} -static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); +void cpu8815_add_gpios(resource_size_t *base, int num, int irq, + struct nmk_gpio_platform_data *pdata) +{ + int first = 0; + int i; -static struct platform_device *platform_devs[] __initdata = { - cpu8815_platform_gpio + 0, - cpu8815_platform_gpio + 1, - cpu8815_platform_gpio + 2, - cpu8815_platform_gpio + 3, -}; + for (i = 0; i < num; i++, first += 32, irq++) { + pdata->first_gpio = first; + pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); + pdata->num_gpio = 32; -static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng_device -}; + cpu8815_add_gpio(i, base[i], irq, pdata); + } +} static int __init cpu8815_init(void) { - int i; - - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); + struct nmk_gpio_platform_data pdata = { + /* No custom data yet */ + }; + + cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base), + IRQ_GPIO0, &pdata); + amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0); + amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0); return 0; } arch_initcall(cpu8815_init); @@ -147,7 +123,7 @@ void __init cpu8815_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - clk_init(); + nomadik_clk_init(); } /* diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 0fc2f6f1cc9..6d14454d460 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -5,6 +5,7 @@ #include <linux/i2c-gpio.h> #include <linux/platform_device.h> #include <plat/gpio-nomadik.h> +#include <plat/pincfg.h> /* * There are two busses in the 8815NHK. @@ -12,19 +13,27 @@ * use bit-bang through GPIO by now, to keep things simple */ +/* I2C0 connected to the STw4811 power management chip */ static struct i2c_gpio_platform_data nhk8815_i2c_data0 = { /* keep defaults for timeouts; pins are push-pull bidirectional */ .scl_pin = 62, .sda_pin = 63, }; +/* I2C1 connected to various sensors */ static struct i2c_gpio_platform_data nhk8815_i2c_data1 = { /* keep defaults for timeouts; pins are push-pull bidirectional */ .scl_pin = 53, .sda_pin = 54, }; -/* first bus: GPIO XX and YY */ +/* I2C2 connected to the USB portions of the STw4811 only */ +static struct i2c_gpio_platform_data nhk8815_i2c_data2 = { + /* keep defaults for timeouts; pins are push-pull bidirectional */ + .scl_pin = 73, + .sda_pin = 74, +}; + static struct platform_device nhk8815_i2c_dev0 = { .name = "i2c-gpio", .id = 0, @@ -32,7 +41,7 @@ static struct platform_device nhk8815_i2c_dev0 = { .platform_data = &nhk8815_i2c_data0, }, }; -/* second bus: GPIO XX and YY */ + static struct platform_device nhk8815_i2c_dev1 = { .name = "i2c-gpio", .id = 1, @@ -41,15 +50,29 @@ static struct platform_device nhk8815_i2c_dev1 = { }, }; +static struct platform_device nhk8815_i2c_dev2 = { + .name = "i2c-gpio", + .id = 2, + .dev = { + .platform_data = &nhk8815_i2c_data2, + }, +}; + +static pin_cfg_t cpu8815_pins_i2c[] = { + PIN_CFG_INPUT(62, GPIO, PULLUP), + PIN_CFG_INPUT(63, GPIO, PULLUP), + PIN_CFG_INPUT(53, GPIO, PULLUP), + PIN_CFG_INPUT(54, GPIO, PULLUP), + PIN_CFG_INPUT(73, GPIO, PULLUP), + PIN_CFG_INPUT(74, GPIO, PULLUP), +}; + static int __init nhk8815_i2c_init(void) { - nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO); - nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO); + nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c)); platform_device_register(&nhk8815_i2c_dev0); - - nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO); - nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO); platform_device_register(&nhk8815_i2c_dev1); + platform_device_register(&nhk8815_i2c_dev2); return 0; } @@ -58,6 +81,7 @@ static void __exit nhk8815_i2c_exit(void) { platform_device_unregister(&nhk8815_i2c_dev0); platform_device_unregister(&nhk8815_i2c_dev1); + platform_device_unregister(&nhk8815_i2c_dev2); return; } diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index 8faabc56039..a118e615f86 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -22,56 +22,56 @@ #include <mach/hardware.h> -#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */ +#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */ /* * Interrupt numbers generic for all Nomadik Chip cuts */ -#define IRQ_WATCHDOG 0 -#define IRQ_SOFTINT 1 -#define IRQ_CRYPTO 2 -#define IRQ_OWM 3 -#define IRQ_MTU0 4 -#define IRQ_MTU1 5 -#define IRQ_GPIO0 6 -#define IRQ_GPIO1 7 -#define IRQ_GPIO2 8 -#define IRQ_GPIO3 9 -#define IRQ_RTC_RTT 10 -#define IRQ_SSP 11 -#define IRQ_UART0 12 -#define IRQ_DMA1 13 -#define IRQ_CLCD_MDIF 14 -#define IRQ_DMA0 15 -#define IRQ_PWRFAIL 16 -#define IRQ_UART1 17 -#define IRQ_FIRDA 18 -#define IRQ_MSP0 19 -#define IRQ_I2C0 20 -#define IRQ_I2C1 21 -#define IRQ_SDMMC 22 -#define IRQ_USBOTG 23 -#define IRQ_SVA_IT0 24 -#define IRQ_SVA_IT1 25 -#define IRQ_SAA_IT0 26 -#define IRQ_SAA_IT1 27 -#define IRQ_UART2 28 -#define IRQ_MSP2 31 -#define IRQ_L2CC 48 -#define IRQ_HPI 49 -#define IRQ_SKE 50 -#define IRQ_KP 51 -#define IRQ_MEMST 54 -#define IRQ_SGA_IT 58 -#define IRQ_USBM 60 -#define IRQ_MSP1 62 +#define IRQ_WATCHDOG 1 +#define IRQ_SOFTINT 2 +#define IRQ_CRYPTO 3 +#define IRQ_OWM 4 +#define IRQ_MTU0 5 +#define IRQ_MTU1 6 +#define IRQ_GPIO0 7 +#define IRQ_GPIO1 8 +#define IRQ_GPIO2 9 +#define IRQ_GPIO3 10 +#define IRQ_RTC_RTT 11 +#define IRQ_SSP 12 +#define IRQ_UART0 13 +#define IRQ_DMA1 14 +#define IRQ_CLCD_MDIF 15 +#define IRQ_DMA0 16 +#define IRQ_PWRFAIL 17 +#define IRQ_UART1 18 +#define IRQ_FIRDA 19 +#define IRQ_MSP0 20 +#define IRQ_I2C0 21 +#define IRQ_I2C1 22 +#define IRQ_SDMMC 23 +#define IRQ_USBOTG 24 +#define IRQ_SVA_IT0 25 +#define IRQ_SVA_IT1 26 +#define IRQ_SAA_IT0 27 +#define IRQ_SAA_IT1 28 +#define IRQ_UART2 29 +#define IRQ_MSP2 30 +#define IRQ_L2CC 49 +#define IRQ_HPI 50 +#define IRQ_SKE 51 +#define IRQ_KP 52 +#define IRQ_MEMST 55 +#define IRQ_SGA_IT 59 +#define IRQ_USBM 61 +#define IRQ_MSP1 63 -#define NOMADIK_SOC_NR_IRQS 64 +#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS) +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) #define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) /* Following two are used by entry_macro.S, to access our dual-vic */ @@ -79,4 +79,3 @@ #define VIC_REG_IRQSR1 0x20 #endif /* __ASM_ARCH_IRQS_H */ - diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index f2f8a584701..c53469802c0 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -37,12 +37,12 @@ #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> #include <mach/camera.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e75e2d55a2d..6ec385e2b98 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,8 +23,10 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> + +#include <mach/usb.h> + #include "common.h" /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index a28e989a63f..44a4ab195fb 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,11 +40,11 @@ #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/flash.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 108a8640fc6..86cb5a04a40 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> #include <plat/flash.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 118a9d4a4c5..b3f6e943e66 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -44,10 +44,10 @@ #include <plat/omap7xx.h> #include <plat/board.h> #include <plat/keypad.h> -#include <plat/usb.h> #include <plat/mmc.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7970223a559..f21c2966daa 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -35,11 +35,11 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/mmc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7212ae97f44..4007a372481 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> @@ -34,6 +33,7 @@ #include <plat/clock.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index da8d872d3d1..8784705edb6 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -45,11 +45,11 @@ #include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 949b62a7369..26bcb9defcd 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -35,7 +35,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/dma.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 7f1e1cf2bf4..4d099446dfa 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -35,7 +35,6 @@ #include <plat/led.h> #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 3c71c6bace2..355980321c2 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -37,7 +37,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -45,6 +44,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" @@ -288,8 +288,7 @@ palmz71_gpio_setup(int early) } gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - palmz71_powercable, IRQF_SAMPLE_RANDOM, - "palmz71-cable", NULL)) + palmz71_powercable, 0, "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 3b7b82b1368..8c665bd16ac 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -37,13 +37,13 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/board-sx1.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index afd67f0ec49..3497769eb35 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -35,9 +35,10 @@ #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> +#include <plat/board.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c6ce93f71d0..c007d80dfb6 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,10 +25,11 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> +#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ -#include <plat/usb.h> /* for OTG_BASE */ #include <mach/hardware.h> +#include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h new file mode 100644 index 00000000000..753cd5ce694 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -0,0 +1,165 @@ +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +void omap_otg_init(struct omap_usb_config *config); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 +#define OMAP1_OHCI_BASE 0xfffba000 + +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 64c65bcb2d6..aa81593db1a 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -140,7 +140,8 @@ static int __init omap1_dm_timer_init(void) } pdata->set_timer_src = omap1_dm_timer_set_src; - pdata->needs_manual_reset = 1; + pdata->timer_capability = OMAP_TIMER_ALWON | + OMAP_TIMER_NEEDS_RESET; ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); if (ret) { diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index e61afd92276..65f88176fba 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -27,7 +27,8 @@ #include <asm/irq.h> #include <plat/mux.h> -#include <plat/usb.h> + +#include <mach/usb.h> #include "common.h" @@ -55,6 +56,119 @@ #define INT_USB_IRQ_HGEN INT_USB_HHC_1 #define INT_USB_IRQ_OTG IH2_BASE + 8 +#ifdef CONFIG_ARCH_OMAP_OTG + +void __init +omap_otg_init(struct omap_usb_config *config) +{ + u32 syscon; + int alt_pingroup = 0; + + /* NOTE: no bus or clock setup (yet?) */ + + syscon = omap_readl(OTG_SYSCON_1) & 0xffff; + if (!(syscon & OTG_RESET_DONE)) + pr_debug("USB resets not complete?\n"); + + //omap_writew(0, OTG_IRQ_EN); + + /* pin muxing and transceiver pinouts */ + if (config->pins[0] > 2) /* alt pingroup 2 */ + alt_pingroup = 1; + syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); + syscon |= config->usb1_init(config->pins[1]); + syscon |= config->usb2_init(config->pins[2], alt_pingroup); + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); + + syscon = config->hmc_mode; + syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; +#ifdef CONFIG_USB_OTG + if (config->otg) + syscon |= OTG_EN; +#endif + if (cpu_class_is_omap1()) + pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", + omap_readl(USB_TRANSCEIVER_CTRL)); + pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); + omap_writel(syscon, OTG_SYSCON_2); + + printk("USB: hmc %d", config->hmc_mode); + if (!alt_pingroup) + printk(", usb2 alt %d wires", config->pins[2]); + else if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (!alt_pingroup && config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + if (config->otg) + printk(", Mini-AB on usb%d", config->otg - 1); + printk("\n"); + + if (cpu_class_is_omap1()) { + u16 w; + + /* leave USB clocks/controllers off until needed */ + w = omap_readw(ULPD_SOFT_REQ); + w &= ~SOFT_USB_CLK_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + w = omap_readw(ULPD_CLOCK_CTRL); + w &= ~USB_MCLK_EN; + w |= DIS_USB_PVCI_CLK; + omap_writew(w, ULPD_CLOCK_CTRL); + } + syscon = omap_readl(OTG_SYSCON_1); + syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->otg || config->register_dev) { + struct platform_device *udc_device = config->udc_device; + int status; + + syscon &= ~DEV_IDLE_EN; + udc_device->dev.platform_data = config; + status = platform_device_register(udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->otg || config->register_host) { + struct platform_device *ohci_device = config->ohci_device; + int status; + + syscon &= ~HST_IDLE_EN; + ohci_device->dev.platform_data = config; + status = platform_device_register(ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + } +#endif + +#ifdef CONFIG_USB_OTG + if (config->otg) { + struct platform_device *otg_device = config->otg_device; + int status; + + syscon &= ~OTG_IDLE_EN; + otg_device->dev.platform_data = config; + status = platform_device_register(otg_device); + if (status) + pr_debug("can't register OTG device, %d\n", status); + } +#endif + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); +} + +#else +void omap_otg_init(struct omap_usb_config *config) {} +#endif + #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4cf5142f22c..dd0fbf76ac7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -9,7 +9,7 @@ config ARCH_OMAP2PLUS_TYPICAL select REGULATOR select PM_RUNTIME select VFP - select NEON if ARCH_OMAP3 || ARCH_OMAP4 + select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 select SERIAL_OMAP select SERIAL_OMAP_CONSOLE select I2C @@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL help Compile a kernel suitable for booting most boards +config SOC_HAS_OMAP2_SDRC + bool "OMAP2 SDRAM Controller support" + config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS default y select CPU_V6 select MULTI_IRQ_HANDLER + select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 bool "TI OMAP3" @@ -35,9 +39,11 @@ config ARCH_OMAP3 select CPU_V7 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select ARM_CPU_SUSPEND if PM select MULTI_IRQ_HANDLER + select SOC_HAS_OMAP2_SDRC config ARCH_OMAP4 bool "TI OMAP4" @@ -52,10 +58,17 @@ config ARCH_OMAP4 select PL310_ERRATA_727915 select ARM_ERRATA_720789 select ARCH_HAS_OPP + select PM_RUNTIME if CPU_IDLE select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM +config SOC_OMAP5 + bool "TI OMAP5" + select CPU_V7 + select ARM_GIC + select HAVE_SMP + comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -64,19 +77,19 @@ config SOC_OMAP2420 depends on ARCH_OMAP2 default y select OMAP_DM_TIMER - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_TI81XX bool "TI81XX support" @@ -85,8 +98,10 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" - depends on ARCH_OMAP3 default y + select CPU_V7 + select ARM_CPU_SUSPEND if PM + select MULTI_IRQ_HANDLER config OMAP_PACKAGE_ZAF bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c262..f6a24b3f9c4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,7 +6,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o -omap-2-3-common = irq.o sdrc.o +omap-2-3-common = irq.o hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ @@ -16,19 +16,24 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o +omap-4-5-common = omap4-common.o omap-wakeupgen.o \ + sleep44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -66,12 +71,12 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o -obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o -obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o + +obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -82,14 +87,22 @@ endif endif +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +endif + # PRCM +omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \ + prcm_mpu44xx.o prminst44xx.o \ + vc44xx_data.o vp44xx_data.o obj-y += prm_common.o obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o -obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o -obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o +obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -99,6 +112,9 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -113,10 +129,14 @@ obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) +obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) +obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o # PRCM clockdomain control clockdomain-common += clockdomain.o -clockdomain-common += clockdomains_common_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o @@ -129,6 +149,11 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) +obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) +obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -146,6 +171,10 @@ obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) +obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o @@ -173,6 +202,7 @@ obj-$(CONFIG_OMAP3_EMU) += emu.o # L3 interconnect obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o +obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o @@ -189,6 +219,10 @@ endif # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o +ifneq ($(CONFIG_DRM_OMAP),) +obj-y += drm.o +endif + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -244,9 +278,6 @@ obj-y += $(omap-flash-y) $(omap-flash-m) omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - -usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o -obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-y += omap_phy_internal.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 447682c4e11..2c90ac68668 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -15,27 +15,13 @@ * General Public License for more details. */ -#include <linux/clk.h> +#include <linux/err.h> #include <linux/davinci_emac.h> -#include <linux/platform_device.h> -#include <plat/irqs.h> +#include <asm/system.h> +#include <plat/omap_device.h> #include <mach/am35xx.h> - #include "control.h" - -static struct mdio_platform_data am35xx_emac_mdio_pdata; - -static struct resource am35xx_emac_mdio_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), -}; - -static struct platform_device am35xx_emac_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), - .resource = am35xx_emac_mdio_resources, - .dev.platform_data = &am35xx_emac_mdio_pdata, -}; +#include "am35xx-emac.h" static void am35xx_enable_emac_int(void) { @@ -69,41 +55,57 @@ static struct emac_platform_data am35xx_emac_pdata = { .interrupt_disable = am35xx_disable_emac_int, }; -static struct resource am35xx_emac_resources[] = { - DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), - DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), -}; +static struct mdio_platform_data am35xx_mdio_pdata; -static struct platform_device am35xx_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am35xx_emac_resources), - .resource = am35xx_emac_resources, - .dev = { - .platform_data = &am35xx_emac_pdata, - }, -}; +static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, + void *pdata, int pdata_len) +{ + struct platform_device *pdev; + + pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, + NULL, 0, false); + if (IS_ERR(pdev)) { + WARN(1, "Can't build omap_device for %s:%s.\n", + oh->class->name, oh->name); + return PTR_ERR(pdev); + } + + return 0; +} void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { + struct omap_hwmod *oh; u32 v; - int err; + int ret; - am35xx_emac_pdata.rmii_en = rmii_en; - am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; - err = platform_device_register(&am35xx_emac_device); - if (err) { - pr_err("AM35x: failed registering EMAC device: %d\n", err); + oh = omap_hwmod_lookup("davinci_mdio"); + if (!oh) { + pr_err("Could not find davinci_mdio hwmod\n"); + return; + } + + am35xx_mdio_pdata.bus_freq = mdio_bus_freq; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, + sizeof(am35xx_mdio_pdata)); + if (ret) { + pr_err("Could not build davinci_mdio hwmod device\n"); return; } - err = platform_device_register(&am35xx_emac_mdio_device); - if (err) { - pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); - platform_device_unregister(&am35xx_emac_device); + oh = omap_hwmod_lookup("davinci_emac"); + if (!oh) { + pr_err("Could not find davinci_emac hwmod\n"); + return; + } + + am35xx_emac_pdata.rmii_en = rmii_en; + + ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, + sizeof(am35xx_emac_pdata)); + if (ret) { + pr_err("Could not build davinci_emac hwmod device\n"); return; } diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99ca6bad5c3..9511584fdc4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -218,9 +218,6 @@ static struct twl4030_gpio_platform_data sdp2430_gpio_data = { }; static struct twl4030_platform_data sdp2430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, .vmmc1 = &sdp2430_vmmc1, @@ -254,16 +251,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_usb_config sdp2430_usb_config __initdata = { - .otg = 1, -#ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 0x0, -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - .hmc_mode = 0x1, -#endif - .pins[0] = 3, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -280,7 +267,6 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); omap_hsmmc_init(mmc); - omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 8e17284a803..ad8a7d94afc 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 502c31e123b..e5fa46bfde2 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,6 @@ #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/gpmc.h> @@ -253,13 +252,6 @@ out: clk_put(gpmc_fck); } -static struct omap_usb_config apollon_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ - - .pins[0] = 6, -}; - static struct panel_generic_dpi_data apollon_panel_data = { .name = "apollon", }; @@ -297,15 +289,6 @@ static void __init apollon_led_init(void) gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } -static void __init apollon_usb_init(void) -{ - /* USB device */ - /* DEVICE_SUSPEND */ - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); - omap2_usbfs_init(&apollon_usb_config); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -321,7 +304,6 @@ static void __init omap_apollon_init(void) apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); - apollon_usb_init(); /* REVISIT: where's the correct place */ omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); @@ -329,7 +311,7 @@ static void __init omap_apollon_init(void) /* LCD PWR_EN */ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ + /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); v |= (1 << 24); omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index ded100c80a9..97d719047af 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = { .power = &cm_t35_power_data, }; +#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) +#include <media/omap3isp.h> +#include "devices.h" + +static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("mt9t001", 0x5d), + }, + { + I2C_BOARD_INFO("tvp5150", 0x5c), + }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[0], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[1], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = { + { + .subdevs = cm_t35_isp_primary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 1, + }, + }, + }, + { + .subdevs = cm_t35_isp_secondary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 0, + }, + }, + }, + { NULL, 0, }, +}; + +static struct isp_platform_data cm_t35_isp_pdata = { + .subdevs = cm_t35_isp_subdevs, +}; + +static void __init cm_t35_init_camera(void) +{ + if (omap3_init_camera(&cm_t35_isp_pdata) < 0) + pr_warn("CM-T3x: Failed registering camera device!\n"); +} + +#else +static inline void cm_t35_init_camera(void) {} +#endif /* CONFIG_VIDEO_OMAP3 */ + static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, @@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void) TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); + + omap_register_i2c_bus(3, 400, NULL, 0); } #ifdef CONFIG_OMAP_MUX @@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + /* Camera */ + OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void) usb_musb_init(NULL); cm_t35_init_usbh(); + cm_t35_init_camera(); } static void __init cm_t35_init(void) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 20293465786..6f93a20536e 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -25,23 +25,12 @@ #include "common-board-devices.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) -#define omap_intc_of_init NULL +#define intc_of_init NULL #endif #ifndef CONFIG_ARCH_OMAP4 #define gic_of_init NULL #endif -static struct of_device_id irq_match[] __initdata = { - { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, }, - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { } -}; - -static void __init omap_init_irq(void) -{ - of_irq_init(irq_match); -} - static struct of_device_id omap_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, { .compatible = "ti,omap-infra", }, @@ -65,7 +54,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -84,7 +73,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap243x_map_io, .init_early = omap2430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, @@ -103,7 +92,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap3_timer, @@ -112,6 +101,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") MACHINE_END #endif +#ifdef CONFIG_SOC_AM33XX +static const char *am33xx_boards_compat[] __initdata = { + "ti,am33xx", + NULL, +}; + +DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = am33xx_map_io, + .init_early = am33xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_am33xx_timer, + .dt_compat = am33xx_boards_compat, +MACHINE_END +#endif + #ifdef CONFIG_ARCH_OMAP4 static const char *omap4_boards_compat[] __initdata = { "ti,omap4", @@ -122,7 +129,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap4_map_io, .init_early = omap4430_init_early, - .init_irq = omap_init_irq, + .init_irq = omap_gic_of_init, .handle_irq = gic_handle_irq, .init_machine = omap_generic_init, .init_late = omap4430_init_late, @@ -131,3 +138,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .restart = omap_prcm_restart, MACHINE_END #endif + +#ifdef CONFIG_SOC_OMAP5 +static const char *omap5_boards_compat[] __initdata = { + "ti,omap5", + NULL, +}; + +DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap5_map_io, + .init_early = omap5_init_early, + .init_irq = omap_gic_of_init, + .handle_irq = gic_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap5_timer, + .dt_compat = omap5_boards_compat, + .restart = omap_prcm_restart, +MACHINE_END +#endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 876becf8205..ace20482e3e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/menelaus.h> @@ -329,17 +328,6 @@ static void __init h4_init_flash(void) h4_flash_resource.end = base + SZ_64M - 1; } -static struct omap_usb_config h4_usb_config __initdata = { - /* S1.10 OFF -- usb "download port" - * usb0 switched to Mini-B port and isp1105 transceiver; - * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging - */ - .register_dev = 1, - .pins[0] = 3, -/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ - .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ -}; - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -381,7 +369,6 @@ static void __init omap_h4_init(void) ARRAY_SIZE(h4_i2c_board_info)); platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap2_usbfs_init(&h4_usb_config); omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 580fd17208d..6202fc76e49 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -433,7 +433,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 639bd07ea38..ef230a0eb5e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -24,6 +24,10 @@ #include <linux/leds.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> @@ -43,6 +47,7 @@ #include <plat/board.h> #include <plat/usb.h> +#include <plat/nand.h> #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> @@ -53,7 +58,6 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 @@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev, platform_device_register(&leds_gpio); + /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output + * for starting USB tranceiver + */ +#ifdef CONFIG_TWL4030_CORE + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { + u8 val; + + twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1); + val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */ + twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1); + } +#endif + return 0; } @@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { }; #endif +/* VAUX2 for USB */ +static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { + REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vaux2", NULL), +}; + +static struct regulator_init_data omap3evm_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies), + .consumer_supplies = omap3evm_vaux2_supplies, +}; + static struct twl4030_platform_data omap3evm_twldata = { /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, @@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; +static struct mtd_partition omap3evm_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2*(SZ_128K) + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40*(SZ_128K) + }, + { + .name = "File system", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + static void __init omap3_evm_init(void) { struct omap_board_mux *obm; @@ -623,6 +693,9 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) + omap3evm_twldata.vaux2 = &omap3evm_vaux2; + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); @@ -656,6 +729,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions)); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 932e1778aff..fca93d1afd4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -93,9 +93,6 @@ static struct twl4030_usb_data omap3logic_usb_data = { static struct twl4030_platform_data omap3logic_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982fb2622ab..70f6d1d2546 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -106,7 +106,7 @@ static struct platform_device leds_gpio = { static struct omap_abe_twl6040_data panda_abe_audio_data = { /* Audio out */ .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - /* HandsFree through expasion connector */ + /* HandsFree through expansion connector */ .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, @@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), /* dispc2_data0 */ OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5c4e6654216..ea3f565ba1a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) return omap2_clksel_set_parent(clk, new_parent); } -/* OMAP3/4 non-CORE DPLL clkops */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - -const struct clkops clkops_omap3_noncore_dpll_ops = { - .enable = omap3_noncore_dpll_enable, - .disable = omap3_noncore_dpll_disable, - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; - -const struct clkops clkops_omap3_core_dpll_ops = { - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; - -#endif - /* * OMAP2+ clock reset and init functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index a1bb23a2335..35ec5f3d9a7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -155,4 +155,18 @@ extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; extern const struct clkops clkops_omap4_dpllmx_ops; +/* clksel_rate blocks shared between OMAP44xx and AM33xx */ +extern const struct clksel_rate div_1_0_rates[]; +extern const struct clksel_rate div_1_1_rates[]; +extern const struct clksel_rate div_1_2_rates[]; +extern const struct clksel_rate div_1_3_rates[]; +extern const struct clksel_rate div_1_4_rates[]; +extern const struct clksel_rate div31_1to31_rates[]; + +/* clocks shared between various OMAP SoCs */ +extern struct clk virt_19200000_ck; +extern struct clk virt_26000000_ck; + +extern int am33xx_clk_init(void); + #endif diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index bace9308a4d..002745181ad 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1774,8 +1774,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), @@ -1784,8 +1782,6 @@ static struct omap_clk omap2420_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), @@ -1901,42 +1897,9 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), + CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), + CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 3b4d09a5039..cacabb070e2 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1858,11 +1858,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), @@ -1871,11 +1866,6 @@ static struct omap_clk omap2430_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), @@ -2000,42 +1990,9 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), - CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), - CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), + CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), + CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c new file mode 100644 index 00000000000..25bbcc7ca4d --- /dev/null +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -0,0 +1,1105 @@ +/* + * AM33XX Clock data + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <plat/clkdev_omap.h> +#include <plat/am33xx.h> + +#include "iomap.h" +#include "control.h" +#include "clock.h" +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-33xx.h" +#include "prm.h" + +/* Maximum DPLL multiplier, divider values for AM33XX */ +#define AM33XX_MAX_DPLL_MULT 2047 +#define AM33XX_MAX_DPLL_DIV 128 + +/* Modulemode control */ +#define AM33XX_MODULEMODE_HWCTRL 0 +#define AM33XX_MODULEMODE_SWCTRL 1 + +/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always + * physically present, in such a case HWMOD enabling of + * clock would be failure with default parent. And timer + * probe thinks clock is already enabled, this leads to + * crash upon accessing timer 3 & 6 registers in probe. + * Fix by setting parent of both these timers to master + * oscillator clock. + */ +static inline void am33xx_init_timer_parent(struct clk *clk) +{ + omap2_clksel_set_parent(clk, clk->parent); +} + +/* Root clocks */ + +/* RTC 32k */ +static struct clk clk_32768_ck = { + .name = "clk_32768_ck", + .clkdm_name = "l4_rtc_clkdm", + .rate = 32768, + .ops = &clkops_null, +}; + +/* On-Chip 32KHz RC OSC */ +static struct clk clk_rc32k_ck = { + .name = "clk_rc32k_ck", + .rate = 32000, + .ops = &clkops_null, +}; + +/* Crystal input clks */ +static struct clk virt_24000000_ck = { + .name = "virt_24000000_ck", + .rate = 24000000, + .ops = &clkops_null, +}; + +static struct clk virt_25000000_ck = { + .name = "virt_25000000_ck", + .rate = 25000000, + .ops = &clkops_null, +}; + +/* Oscillator clock */ +/* 19.2, 24, 25 or 26 MHz */ +static const struct clksel sys_clkin_sel[] = { + { .parent = &virt_19200000_ck, .rates = div_1_0_rates }, + { .parent = &virt_24000000_ck, .rates = div_1_1_rates }, + { .parent = &virt_25000000_ck, .rates = div_1_2_rates }, + { .parent = &virt_26000000_ck, .rates = div_1_3_rates }, + { .parent = NULL }, +}; + +/* External clock - 12 MHz */ +static struct clk tclkin_ck = { + .name = "tclkin_ck", + .rate = 12000000, + .ops = &clkops_null, +}; + +/* + * sys_clk in: input to the dpll and also used as funtional clock for, + * adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse + * + */ +static struct clk sys_clkin_ck = { + .name = "sys_clkin_ck", + .parent = &virt_24000000_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS), + .clksel_mask = AM33XX_CONTROL_STATUS_SYSBOOT1_MASK, + .clksel = sys_clkin_sel, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL_CORE */ +static struct dpll_data dpll_core_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_CORE, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_CORE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_CORE, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKDCOLDO output */ +static struct clk dpll_core_ck = { + .name = "dpll_core_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_core_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_omap3_core_dpll_ops, + .recalc = &omap3_dpll_recalc, +}; + +static struct clk dpll_core_x2_ck = { + .name = "dpll_core_x2_ck", + .parent = &dpll_core_ck, + .flags = CLOCK_CLKOUTX2, + .ops = &clkops_null, + .recalc = &omap3_clkoutx2_recalc, +}; + + +static const struct clksel dpll_core_m4_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m4_ck = { + .name = "dpll_core_m4_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m4_div, + .clksel_reg = AM33XX_CM_DIV_M4_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel dpll_core_m5_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m5_ck = { + .name = "dpll_core_m5_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m5_div, + .clksel_reg = AM33XX_CM_DIV_M5_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel dpll_core_m6_div[] = { + { .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m6_ck = { + .name = "dpll_core_m6_ck", + .parent = &dpll_core_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel = dpll_core_m6_div, + .clksel_reg = AM33XX_CM_DIV_M6_DPLL_CORE, + .clksel_mask = AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_MPU */ +static struct dpll_data dpll_mpu_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_MPU, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_MPU, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_MPU, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_mpu_ck = { + .name = "dpll_mpu_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_mpu_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_omap3_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_mpu_m2_div[] = { + { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_mpu_m2_ck = { + .name = "dpll_mpu_m2_ck", + .clkdm_name = "mpu_clkdm", + .parent = &dpll_mpu_ck, + .clksel = dpll_mpu_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_MPU, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_DDR */ +static struct dpll_data dpll_ddr_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DDR, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_DDR, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_DDR, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_ddr_ck = { + .name = "dpll_ddr_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_ddr_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_ddr_m2_div[] = { + { .parent = &dpll_ddr_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_ddr_m2_ck = { + .name = "dpll_ddr_m2_ck", + .parent = &dpll_ddr_ck, + .clksel = dpll_ddr_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DDR, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* emif_fck functional clock */ +static struct clk dpll_ddr_m2_div2_ck = { + .name = "dpll_ddr_m2_div2_ck", + .clkdm_name = "l3_clkdm", + .parent = &dpll_ddr_m2_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +/* DPLL_DISP */ +static struct dpll_data dpll_disp_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DISP, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_DISP, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_DISP, + .mult_mask = AM33XX_DPLL_MULT_MASK, + .div1_mask = AM33XX_DPLL_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, +}; + +/* CLKOUT: fdpll/M2 */ +static struct clk dpll_disp_ck = { + .name = "dpll_disp_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_disp_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* + * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 + * and ALT_CLK1/2) + */ +static const struct clksel dpll_disp_m2_div[] = { + { .parent = &dpll_disp_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_disp_m2_ck = { + .name = "dpll_disp_m2_ck", + .parent = &dpll_disp_ck, + .clksel = dpll_disp_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_DISP, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +/* DPLL_PER */ +static struct dpll_data dpll_per_dd = { + .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_PERIPH, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, + .control_reg = AM33XX_CM_CLKMODE_DPLL_PER, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .idlest_reg = AM33XX_CM_IDLEST_DPLL_PER, + .mult_mask = AM33XX_DPLL_MULT_PERIPH_MASK, + .div1_mask = AM33XX_DPLL_PER_DIV_MASK, + .enable_mask = AM33XX_DPLL_EN_MASK, + .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, + .max_multiplier = AM33XX_MAX_DPLL_MULT, + .max_divider = AM33XX_MAX_DPLL_DIV, + .min_divider = 1, + .flags = DPLL_J_TYPE, +}; + +/* CLKDCOLDO */ +static struct clk dpll_per_ck = { + .name = "dpll_per_ck", + .parent = &sys_clkin_ck, + .dpll_data = &dpll_per_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, +}; + +/* CLKOUT: fdpll/M2 */ +static const struct clksel dpll_per_m2_div[] = { + { .parent = &dpll_per_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_per_m2_ck = { + .name = "dpll_per_m2_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = AM33XX_CM_DIV_M2_DPLL_PER, + .clksel_mask = AM33XX_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk dpll_per_m2_div4_wkupdm_ck = { + .name = "dpll_per_m2_div4_wkupdm_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &dpll_per_m2_ck, + .fixed_div = 4, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk dpll_per_m2_div4_ck = { + .name = "dpll_per_m2_div4_ck", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_per_m2_ck, + .fixed_div = 4, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk l3_gclk = { + .name = "l3_gclk", + .clkdm_name = "l3_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dpll_core_m4_div2_ck = { + .name = "dpll_core_m4_div2_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk l4_rtc_gclk = { + .name = "l4_rtc_gclk", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk clk_24mhz = { + .name = "clk_24mhz", + .parent = &dpll_per_m2_ck, + .fixed_div = 8, + .ops = &clkops_null, + .recalc = &omap_fixed_divisor_recalc, +}; + +/* + * Below clock nodes describes clockdomains derived out + * of core clock. + */ +static struct clk l4hs_gclk = { + .name = "l4hs_gclk", + .clkdm_name = "l4hs_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l3s_gclk = { + .name = "l3s_gclk", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l4fw_gclk = { + .name = "l4fw_gclk", + .clkdm_name = "l4fw_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk l4ls_gclk = { + .name = "l4ls_gclk", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_core_m4_div2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk sysclk_div_ck = { + .name = "sysclk_div_ck", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* + * In order to match the clock domain with hwmod clockdomain entry, + * separate clock nodes is required for the modules which are + * directly getting their funtioncal clock from sys_clkin. + */ +static struct clk adc_tsc_fck = { + .name = "adc_tsc_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dcan0_fck = { + .name = "dcan0_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk dcan1_fck = { + .name = "dcan1_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp0_fck = { + .name = "mcasp0_fck", + .clkdm_name = "l3s_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp1_fck = { + .name = "mcasp1_fck", + .clkdm_name = "l3s_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk smartreflex0_fck = { + .name = "smartreflex0_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk smartreflex1_fck = { + .name = "smartreflex1_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* + * Modules clock nodes + * + * The following clock leaf nodes are added for the moment because: + * + * - hwmod data is not present for these modules, either hwmod + * control is not required or its not populated. + * - Driver code is not yet migrated to use hwmod/runtime pm + * - Modules outside kernel access (to disable them by default) + * + * - debugss + * - mmu (gfx domain) + * - cefuse + * - usbotg_fck (its additional clock and not really a modulemode) + * - ieee5000 + */ +static struct clk debugss_ick = { + .name = "debugss_ick", + .clkdm_name = "l3_aon_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_omap2_dflt, + .enable_reg = AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .recalc = &followparent_recalc, +}; + +static struct clk mmu_fck = { + .name = "mmu_fck", + .clkdm_name = "gfx_l3_clkdm", + .parent = &dpll_core_m4_ck, + .ops = &clkops_omap2_dflt, + .enable_reg = AM33XX_CM_GFX_MMUDATA_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .recalc = &followparent_recalc, +}; + +static struct clk cefuse_fck = { + .name = "cefuse_fck", + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, + .enable_reg = AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +/* + * clkdiv32 is generated from fixed division of 732.4219 + */ +static struct clk clkdiv32k_ick = { + .name = "clkdiv32k_ick", + .clkdm_name = "clk_24mhz_clkdm", + .rate = 32768, + .parent = &clk_24mhz, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, +}; + +static struct clk usbotg_fck = { + .name = "usbotg_fck", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_per_ck, + .enable_reg = AM33XX_CM_CLKDCOLDO_DPLL_PER, + .enable_bit = AM33XX_ST_DPLL_CLKDCOLDO_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk ieee5000_fck = { + .name = "ieee5000_fck", + .clkdm_name = "l3s_clkdm", + .parent = &dpll_core_m4_div2_ck, + .enable_reg = AM33XX_CM_PER_IEEE5000_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +/* Timers */ +static const struct clksel timer1_clkmux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, + { .parent = &tclkin_ck, .rates = div_1_2_rates }, + { .parent = &clk_rc32k_ck, .rates = div_1_3_rates }, + { .parent = &clk_32768_ck, .rates = div_1_4_rates }, + { .parent = NULL }, +}; + +static struct clk timer1_fck = { + .name = "timer1_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer1_clkmux_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER1MS_CLK, + .clksel_mask = AM33XX_CLKSEL_0_2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel timer2_to_7_clk_sel[] = { + { .parent = &tclkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_clkin_ck, .rates = div_1_1_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk timer2_fck = { + .name = "timer2_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER2_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer3_fck = { + .name = "timer3_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &am33xx_init_timer_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER3_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer4_fck = { + .name = "timer4_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER4_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer5_fck = { + .name = "timer5_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER5_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer6_fck = { + .name = "timer6_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &am33xx_init_timer_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER6_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk timer7_fck = { + .name = "timer7_fck", + .clkdm_name = "l4ls_clkdm", + .parent = &sys_clkin_ck, + .init = &omap2_init_clksel_parent, + .clksel = timer2_to_7_clk_sel, + .clksel_reg = AM33XX_CLKSEL_TIMER7_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpsw_125mhz_gclk = { + .name = "cpsw_125mhz_gclk", + .clkdm_name = "cpsw_125mhz_clkdm", + .parent = &dpll_core_m5_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static const struct clksel cpsw_cpts_rft_clkmux_sel[] = { + { .parent = &dpll_core_m5_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m4_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk cpsw_cpts_rft_clk = { + .name = "cpsw_cpts_rft_clk", + .clkdm_name = "cpsw_125mhz_clkdm", + .parent = &dpll_core_m5_ck, + .clksel = cpsw_cpts_rft_clkmux_sel, + .clksel_reg = AM33XX_CM_CPTS_RFT_CLKSEL, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +/* gpio */ +static const struct clksel gpio0_dbclk_mux_sel[] = { + { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, + { .parent = &clk_32768_ck, .rates = div_1_1_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk gpio0_dbclk_mux_ck = { + .name = "gpio0_dbclk_mux_ck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &clk_rc32k_ck, + .init = &omap2_init_clksel_parent, + .clksel = gpio0_dbclk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_GPIO0_DBCLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpio0_dbclk = { + .name = "gpio0_dbclk", + .clkdm_name = "l4_wkup_clkdm", + .parent = &gpio0_dbclk_mux_ck, + .enable_reg = AM33XX_CM_WKUP_GPIO0_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_dbclk = { + .name = "gpio1_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO1_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_dbclk = { + .name = "gpio2_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO2_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_dbclk = { + .name = "gpio3_dbclk", + .clkdm_name = "l4ls_clkdm", + .parent = &clkdiv32k_ick, + .enable_reg = AM33XX_CM_PER_GPIO3_CLKCTRL, + .enable_bit = AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, + .ops = &clkops_omap2_dflt, + .recalc = &followparent_recalc, +}; + +static const struct clksel pruss_ocp_clk_mux_sel[] = { + { .parent = &l3_gclk, .rates = div_1_0_rates }, + { .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk pruss_ocp_gclk = { + .name = "pruss_ocp_gclk", + .clkdm_name = "pruss_ocp_clkdm", + .parent = &l3_gclk, + .init = &omap2_init_clksel_parent, + .clksel = pruss_ocp_clk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_PRUSS_OCP_CLK, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static const struct clksel lcd_clk_mux_sel[] = { + { .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m5_ck, .rates = div_1_1_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk lcd_gclk = { + .name = "lcd_gclk", + .clkdm_name = "lcdc_clkdm", + .parent = &dpll_disp_m2_ck, + .init = &omap2_init_clksel_parent, + .clksel = lcd_clk_mux_sel, + .clksel_reg = AM33XX_CLKSEL_LCDC_PIXEL_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk mmc_clk = { + .name = "mmc_clk", + .clkdm_name = "l4ls_clkdm", + .parent = &dpll_per_m2_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + +static struct clk mmc2_fck = { + .name = "mmc2_fck", + .clkdm_name = "l3s_clkdm", + .parent = &mmc_clk, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static const struct clksel gfx_clksel_sel[] = { + { .parent = &dpll_core_m4_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk gfx_fclk_clksel_ck = { + .name = "gfx_fclk_clksel_ck", + .parent = &dpll_core_m4_ck, + .clksel = gfx_clksel_sel, + .ops = &clkops_null, + .clksel_reg = AM33XX_CLKSEL_GFX_FCLK, + .clksel_mask = AM33XX_CLKSEL_GFX_FCLK_MASK, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div_1_0_2_1_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_AM33XX }, + { .div = 2, .val = 1, .flags = RATE_IN_AM33XX }, + { .div = 0 }, +}; + +static const struct clksel gfx_div_sel[] = { + { .parent = &gfx_fclk_clksel_ck, .rates = div_1_0_2_1_rates }, + { .parent = NULL }, +}; + +static struct clk gfx_fck_div_ck = { + .name = "gfx_fck_div_ck", + .clkdm_name = "gfx_l3_clkdm", + .parent = &gfx_fclk_clksel_ck, + .init = &omap2_init_clksel_parent, + .clksel = gfx_div_sel, + .clksel_reg = AM33XX_CLKSEL_GFX_FCLK, + .clksel_mask = AM33XX_CLKSEL_0_0_MASK, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .ops = &clkops_null, +}; + +static const struct clksel sysclkout_pre_sel[] = { + { .parent = &clk_32768_ck, .rates = div_1_0_rates }, + { .parent = &l3_gclk, .rates = div_1_1_rates }, + { .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates }, + { .parent = &dpll_per_m2_ck, .rates = div_1_3_rates }, + { .parent = &lcd_gclk, .rates = div_1_4_rates }, + { .parent = NULL }, +}; + +static struct clk sysclkout_pre_ck = { + .name = "sysclkout_pre_ck", + .parent = &clk_32768_ck, + .init = &omap2_init_clksel_parent, + .clksel = sysclkout_pre_sel, + .clksel_reg = AM33XX_CM_CLKOUT_CTRL, + .clksel_mask = AM33XX_CLKOUT2SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* Divide by 8 clock rates with default clock is 1/1*/ +static const struct clksel_rate div8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_AM33XX }, + { .div = 2, .val = 1, .flags = RATE_IN_AM33XX }, + { .div = 3, .val = 2, .flags = RATE_IN_AM33XX }, + { .div = 4, .val = 3, .flags = RATE_IN_AM33XX }, + { .div = 5, .val = 4, .flags = RATE_IN_AM33XX }, + { .div = 6, .val = 5, .flags = RATE_IN_AM33XX }, + { .div = 7, .val = 6, .flags = RATE_IN_AM33XX }, + { .div = 8, .val = 7, .flags = RATE_IN_AM33XX }, + { .div = 0 }, +}; + +static const struct clksel clkout2_div[] = { + { .parent = &sysclkout_pre_ck, .rates = div8_rates }, + { .parent = NULL }, +}; + +static struct clk clkout2_ck = { + .name = "clkout2_ck", + .parent = &sysclkout_pre_ck, + .ops = &clkops_omap2_dflt, + .clksel = clkout2_div, + .clksel_reg = AM33XX_CM_CLKOUT_CTRL, + .clksel_mask = AM33XX_CLKOUT2DIV_MASK, + .enable_reg = AM33XX_CM_CLKOUT_CTRL, + .enable_bit = AM33XX_CLKOUT2EN_SHIFT, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static const struct clksel wdt_clkmux_sel[] = { + { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, + { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .clkdm_name = "l4_wkup_clkdm", + .parent = &clk_rc32k_ck, + .init = &omap2_init_clksel_parent, + .clksel = wdt_clkmux_sel, + .clksel_reg = AM33XX_CLKSEL_WDT1_CLK, + .clksel_mask = AM33XX_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +/* + * clkdev + */ +static struct omap_clk am33xx_clks[] = { + CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX), + CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX), + CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX), + CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX), + CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX), + CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX), + CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX), + CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX), + CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX), + CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX), + CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX), + CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX), + CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX), + CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX), + CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), + CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX), + CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX), + CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX), + CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), + CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), + CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), + CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), + CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), + CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX), + CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX), + CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX), + CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX), + CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX), + CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX), + CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX), + CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX), + CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX), + CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX), + CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX), + CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX), + CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX), + CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX), + CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX), + CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX), + CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), + CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), + CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), +}; + +int __init am33xx_clk_init(void) +{ + struct omap_clk *c; + u32 cpu_clkflg; + + if (soc_is_am33xx()) { + cpu_mask = RATE_IN_AM33XX; + cpu_clkflg = CK_AM33XX; + } + + clk_init(&omap2_clk_functions); + + for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) + clk_preinit(c->lk.clk); + + for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) { + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + } + + recalculate_root_clocks(); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1efdec236ae..83bed9ad301 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -93,18 +93,6 @@ static struct clk virt_16_8m_ck = { .rate = 16800000, }; -static struct clk virt_19_2m_ck = { - .name = "virt_19_2m_ck", - .ops = &clkops_null, - .rate = 19200000, -}; - -static struct clk virt_26m_ck = { - .name = "virt_26m_ck", - .ops = &clkops_null, - .rate = 26000000, -}; - static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", .ops = &clkops_null, @@ -145,8 +133,8 @@ static const struct clksel osc_sys_clksel[] = { { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, - { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, - { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_19200000_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26000000_ck, .rates = osc_sys_26m_rates }, { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, { .parent = NULL }, }; @@ -2490,13 +2478,13 @@ static struct clk uart4_fck = { }; static struct clk uart4_fck_am35xx = { - .name = "uart4_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = AM35XX_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, }; static struct clk gpt2_fck = { @@ -3201,8 +3189,12 @@ static struct clk vpfe_fck = { }; /* - * The UART1/2 functional clock acts as the functional - * clock for UART4. No separate fclk control available. + * The UART1/2 functional clock acts as the functional clock for + * UART4. No separate fclk control available. XXX Well now we have a + * uart4_fck that is apparently used as the UART4 functional clock, + * but it also seems that uart1_fck or uart2_fck are still needed, at + * least for UART4 softresets to complete. This really needs + * clarification. */ static struct clk uart4_ick_am35xx = { .name = "uart4_ick", @@ -3230,17 +3222,12 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX), - CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_3XXX), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), @@ -3307,8 +3294,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), - CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), @@ -3391,15 +3376,15 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX), + CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), @@ -3413,9 +3398,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), @@ -3474,38 +3456,16 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX), - CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX), - CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX), + CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), }; @@ -3523,7 +3483,7 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_ti816x()) { cpu_mask = RATE_IN_TI816X; cpu_clkflg = CK_TI816X; - } else if (cpu_is_am33xx()) { + } else if (soc_is_am33xx()) { cpu_mask = RATE_IN_AM33XX; } else if (cpu_is_ti814x()) { cpu_mask = RATE_IN_TI814X; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index ba6f9a0a43e..d7f55e43b76 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -107,18 +107,6 @@ static struct clk virt_16800000_ck = { .rate = 16800000, }; -static struct clk virt_19200000_ck = { - .name = "virt_19200000_ck", - .ops = &clkops_null, - .rate = 19200000, -}; - -static struct clk virt_26000000_ck = { - .name = "virt_26000000_ck", - .ops = &clkops_null, - .rate = 26000000, -}; - static struct clk virt_27000000_ck = { .name = "virt_27000000_ck", .ops = &clkops_null, @@ -131,31 +119,6 @@ static struct clk virt_38400000_ck = { .rate = 38400000, }; -static const struct clksel_rate div_1_0_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_1_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_2_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_3_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel_rate div_1_4_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - static const struct clksel_rate div_1_5_rates[] = { { .div = 1, .val = 5, .flags = RATE_IN_4430 }, { .div = 0 }, @@ -289,41 +252,6 @@ static struct clk dpll_abe_x2_ck = { .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel_rate div31_1to31_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 }, - { .div = 2, .val = 2, .flags = RATE_IN_4430 }, - { .div = 3, .val = 3, .flags = RATE_IN_4430 }, - { .div = 4, .val = 4, .flags = RATE_IN_4430 }, - { .div = 5, .val = 5, .flags = RATE_IN_4430 }, - { .div = 6, .val = 6, .flags = RATE_IN_4430 }, - { .div = 7, .val = 7, .flags = RATE_IN_4430 }, - { .div = 8, .val = 8, .flags = RATE_IN_4430 }, - { .div = 9, .val = 9, .flags = RATE_IN_4430 }, - { .div = 10, .val = 10, .flags = RATE_IN_4430 }, - { .div = 11, .val = 11, .flags = RATE_IN_4430 }, - { .div = 12, .val = 12, .flags = RATE_IN_4430 }, - { .div = 13, .val = 13, .flags = RATE_IN_4430 }, - { .div = 14, .val = 14, .flags = RATE_IN_4430 }, - { .div = 15, .val = 15, .flags = RATE_IN_4430 }, - { .div = 16, .val = 16, .flags = RATE_IN_4430 }, - { .div = 17, .val = 17, .flags = RATE_IN_4430 }, - { .div = 18, .val = 18, .flags = RATE_IN_4430 }, - { .div = 19, .val = 19, .flags = RATE_IN_4430 }, - { .div = 20, .val = 20, .flags = RATE_IN_4430 }, - { .div = 21, .val = 21, .flags = RATE_IN_4430 }, - { .div = 22, .val = 22, .flags = RATE_IN_4430 }, - { .div = 23, .val = 23, .flags = RATE_IN_4430 }, - { .div = 24, .val = 24, .flags = RATE_IN_4430 }, - { .div = 25, .val = 25, .flags = RATE_IN_4430 }, - { .div = 26, .val = 26, .flags = RATE_IN_4430 }, - { .div = 27, .val = 27, .flags = RATE_IN_4430 }, - { .div = 28, .val = 28, .flags = RATE_IN_4430 }, - { .div = 29, .val = 29, .flags = RATE_IN_4430 }, - { .div = 30, .val = 30, .flags = RATE_IN_4430 }, - { .div = 31, .val = 31, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - static const struct clksel dpll_abe_m2x2_div[] = { { .parent = &dpll_abe_x2_ck, .rates = div31_1to31_rates }, { .parent = NULL }, @@ -3299,17 +3227,17 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_443X), - CLK(NULL, "gpt10_fck", &timer10_fck, CK_443X), - CLK(NULL, "gpt11_fck", &timer11_fck, CK_443X), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_443X), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_443X), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_443X), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_443X), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_443X), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_443X), - CLK(NULL, "gpt8_fck", &timer8_fck, CK_443X), - CLK(NULL, "gpt9_fck", &timer9_fck, CK_443X), + CLK(NULL, "timer1_fck", &timer1_fck, CK_443X), + CLK(NULL, "timer10_fck", &timer10_fck, CK_443X), + CLK(NULL, "timer11_fck", &timer11_fck, CK_443X), + CLK(NULL, "timer2_fck", &timer2_fck, CK_443X), + CLK(NULL, "timer3_fck", &timer3_fck, CK_443X), + CLK(NULL, "timer4_fck", &timer4_fck, CK_443X), + CLK(NULL, "timer5_fck", &timer5_fck, CK_443X), + CLK(NULL, "timer6_fck", &timer6_fck, CK_443X), + CLK(NULL, "timer7_fck", &timer7_fck, CK_443X), + CLK(NULL, "timer8_fck", &timer8_fck, CK_443X), + CLK(NULL, "timer9_fck", &timer9_fck, CK_443X), CLK(NULL, "uart1_fck", &uart1_fck, CK_443X), CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), @@ -3385,28 +3313,18 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X), - CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), }; int __init omap4xxx_clk_init(void) diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c index 6424d46be14..b9f3ba68148 100644 --- a/arch/arm/mach-omap2/clock_common_data.c +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -43,3 +43,80 @@ const struct clksel_rate dsp_ick_rates[] = { { .div = 3, .val = 3, .flags = RATE_IN_243X }, { .div = 0 }, }; + + +/* clksel_rate blocks shared between OMAP44xx and AM33xx */ + +const struct clksel_rate div_1_0_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_2_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_3_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div_1_4_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +const struct clksel_rate div31_1to31_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, + { .div = 0 }, +}; + +/* Clocks shared between various OMAP SoCs */ + +struct clk virt_19200000_ck = { + .name = "virt_19200000_ck", + .ops = &clkops_null, + .rate = 19200000, +}; + +struct clk virt_26000000_ck = { + .name = "virt_26000000_ck", + .ops = &clkops_null, + .rate = 26000000, +}; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609bad..5601dc13785 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) @@ -195,6 +199,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); +extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void _clkdm_add_autodeps(struct clockdomain *clkdm); extern void _clkdm_del_autodeps(struct clockdomain *clkdm); @@ -202,11 +207,10 @@ extern void _clkdm_del_autodeps(struct clockdomain *clkdm); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; extern struct clkdm_ops omap4_clkdm_operations; +extern struct clkdm_ops am33xx_clkdm_operations; extern struct clkdm_dep gfx_24xx_wkdeps[]; extern struct clkdm_dep dsp_24xx_wkdeps[]; extern struct clockdomain wkup_common_clkdm; -extern struct clockdomain prm_common_clkdm; -extern struct clockdomain cm_common_clkdm; #endif diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c new file mode 100644 index 00000000000..aca6388fad7 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain33xx.c @@ -0,0 +1,74 @@ +/* + * AM33XX clockdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> + +#include "clockdomain.h" +#include "cm33xx.h" + + +static int am33xx_clkdm_sleep(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return am33xx_clkdm_wakeup(clkdm); + + return 0; +} + +static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + am33xx_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops am33xx_clkdm_operations = { + .clkdm_sleep = am33xx_clkdm_sleep, + .clkdm_wakeup = am33xx_clkdm_wakeup, + .clkdm_allow_idle = am33xx_clkdm_allow_idle, + .clkdm_deny_idle = am33xx_clkdm_deny_idle, + .clkdm_clk_enable = am33xx_clkdm_clk_enable, + .clkdm_clk_disable = am33xx_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index 4f04dd11d65..762f2cc542c 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) static int omap4_clkdm_sleep(struct clockdomain *clkdm) { - omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition, + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, clkdm->cm_inst, clkdm->clkdm_offs); return 0; } @@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) { - omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap4_clkdm_wakeup(clkdm); + else + omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); } static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 0ab8e46d5b2..5c741852fac 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -131,8 +131,6 @@ static struct clockdomain dss_2420_clkdm = { static struct clockdomain *clockdomains_omap242x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2420_clkdm, &iva1_2420_clkdm, &dsp_2420_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index 3645ed04489..f09617555e1 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -157,8 +157,6 @@ static struct clockdomain dss_2430_clkdm = { static struct clockdomain *clockdomains_omap243x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2430_clkdm, &mdm_clkdm, &dsp_2430_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1cfb..4972219653c 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c new file mode 100644 index 00000000000..32c90fd9eba --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains33xx_data.c @@ -0,0 +1,196 @@ +/* + * AM33XX Clock Domain data. + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-33xx.h" + +static struct clockdomain l4ls_am33xx_clkdm = { + .name = "l4ls_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3s_am33xx_clkdm = { + .name = "l3s_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4fw_am33xx_clkdm = { + .name = "l4fw_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_am33xx_clkdm = { + .name = "l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4hs_am33xx_clkdm = { + .name = "l4hs_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ocpwp_l3_am33xx_clkdm = { + .name = "ocpwp_l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain pruss_ocp_am33xx_clkdm = { + .name = "pruss_ocp_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain cpsw_125mhz_am33xx_clkdm = { + .name = "cpsw_125mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain lcdc_am33xx_clkdm = { + .name = "lcdc_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain clk_24mhz_am33xx_clkdm = { + .name = "clk_24mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .cm_inst = AM33XX_CM_PER_MOD, + .clkdm_offs = AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_am33xx_clkdm = { + .name = "l4_wkup_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_WKUP_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_aon_am33xx_clkdm = { + .name = "l3_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_aon_am33xx_clkdm = { + .name = "l4_wkup_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .cm_inst = AM33XX_CM_WKUP_MOD, + .clkdm_offs = AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mpu_am33xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .cm_inst = AM33XX_CM_MPU_MOD, + .clkdm_offs = AM33XX_CM_MPU_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_rtc_am33xx_clkdm = { + .name = "l4_rtc_clkdm", + .pwrdm = { .name = "rtc_pwrdm" }, + .cm_inst = AM33XX_CM_RTC_MOD, + .clkdm_offs = AM33XX_CM_RTC_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l3_am33xx_clkdm = { + .name = "gfx_l3_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l4ls_gfx_am33xx_clkdm = { + .name = "gfx_l4ls_gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .cm_inst = AM33XX_CM_GFX_MOD, + .clkdm_offs = AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_cefuse_am33xx_clkdm = { + .name = "l4_cefuse_clkdm", + .pwrdm = { .name = "cefuse_pwrdm" }, + .cm_inst = AM33XX_CM_CEFUSE_MOD, + .clkdm_offs = AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain *clockdomains_am33xx[] __initdata = { + &l4ls_am33xx_clkdm, + &l3s_am33xx_clkdm, + &l4fw_am33xx_clkdm, + &l3_am33xx_clkdm, + &l4hs_am33xx_clkdm, + &ocpwp_l3_am33xx_clkdm, + &pruss_ocp_am33xx_clkdm, + &cpsw_125mhz_am33xx_clkdm, + &lcdc_am33xx_clkdm, + &clk_24mhz_am33xx_clkdm, + &l4_wkup_am33xx_clkdm, + &l3_aon_am33xx_clkdm, + &l4_wkup_aon_am33xx_clkdm, + &mpu_am33xx_clkdm, + &l4_rtc_am33xx_clkdm, + &gfx_l3_am33xx_clkdm, + &gfx_l4ls_gfx_am33xx_clkdm, + &l4_cefuse_am33xx_clkdm, + NULL, +}; + +void __init am33xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am33xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_am33xx); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 6038adb9771..56089c49142 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -59,6 +59,12 @@ static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep gfx_sgx_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep per_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -69,6 +75,14 @@ static struct clkdm_dep per_wkdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ static struct clkdm_dep usbhost_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -79,6 +93,14 @@ static struct clkdm_dep usbhost_wkdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -89,6 +111,14 @@ static struct clkdm_dep mpu_3xxx_wkdeps[] = { { NULL }, }; +static struct clkdm_dep mpu_am35x_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + /* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ static struct clkdm_dep iva2_wkdeps[] = { { .clkdm_name = "core_l3_clkdm" }, @@ -116,6 +146,12 @@ static struct clkdm_dep dss_wkdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + /* 3430: PM_WKDEP_NEON: MPU */ static struct clkdm_dep neon_wkdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -131,6 +167,11 @@ static struct clkdm_dep dss_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep dss_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_PER: MPU, IVA */ static struct clkdm_dep per_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -138,6 +179,11 @@ static struct clkdm_dep per_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep per_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ static struct clkdm_dep usbhost_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -145,6 +191,11 @@ static struct clkdm_dep usbhost_sleepdeps[] = { { NULL }, }; +static struct clkdm_dep usbhost_am35x_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + /* 3430: CM_SLEEPDEP_CAM: MPU */ static struct clkdm_dep cam_sleepdeps[] = { { .clkdm_name = "mpu_clkdm" }, @@ -175,6 +226,15 @@ static struct clockdomain mpu_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, }; +static struct clockdomain mpu_am35x_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_am35x_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, +}; + static struct clockdomain neon_clkdm = { .name = "neon_clkdm", .pwrdm = { .name = "neon_pwrdm" }, @@ -210,6 +270,15 @@ static struct clockdomain sgx_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, }; +static struct clockdomain sgx_am35x_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_am35x_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, +}; + /* * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but * then that information was removed from the 34xx ES2+ TRM. It is @@ -261,6 +330,16 @@ static struct clockdomain dss_3xxx_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, }; +static struct clockdomain dss_am35x_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = dss_am35x_wkdeps, + .sleepdep_srcs = dss_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, +}; + static struct clockdomain cam_clkdm = { .name = "cam_clkdm", .pwrdm = { .name = "cam_pwrdm" }, @@ -279,6 +358,15 @@ static struct clockdomain usbhost_clkdm = { .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, }; +static struct clockdomain usbhost_am35x_clkdm = { + .name = "usbhost_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = usbhost_am35x_wkdeps, + .sleepdep_srcs = usbhost_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, +}; + static struct clockdomain per_clkdm = { .name = "per_clkdm", .pwrdm = { .name = "per_pwrdm" }, @@ -289,6 +377,16 @@ static struct clockdomain per_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, }; +static struct clockdomain per_am35x_clkdm = { + .name = "per_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_am35x_wkdeps, + .sleepdep_srcs = per_am35x_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, +}; + /* * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is * switched of even if sdti is in use @@ -341,31 +439,42 @@ static struct clkdm_autodep clkdm_autodeps[] = { } }; +static struct clkdm_autodep clkdm_am35x_autodeps[] = { + { + .clkdm = { .name = "mpu_clkdm" }, + }, + { + .clkdm = { .name = NULL }, + } +}; + /* * */ -static struct clockdomain *clockdomains_omap3430_common[] __initdata = { +static struct clockdomain *clockdomains_common[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, - &mpu_3xxx_clkdm, &neon_clkdm, - &iva2_clkdm, - &d2d_clkdm, &core_l3_3xxx_clkdm, &core_l4_3xxx_clkdm, - &dss_3xxx_clkdm, - &cam_clkdm, - &per_clkdm, &emu_clkdm, &dpll1_clkdm, - &dpll2_clkdm, &dpll3_clkdm, &dpll4_clkdm, NULL }; +static struct clockdomain *clockdomains_omap3430[] __initdata = { + &mpu_3xxx_clkdm, + &iva2_clkdm, + &d2d_clkdm, + &dss_3xxx_clkdm, + &cam_clkdm, + &per_clkdm, + &dpll2_clkdm, + NULL +}; + static struct clockdomain *clockdomains_omap3430es1[] __initdata = { &gfx_3430es1_clkdm, NULL, @@ -378,21 +487,41 @@ static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = { NULL, }; +static struct clockdomain *clockdomains_am35x[] __initdata = { + &mpu_am35x_clkdm, + &sgx_am35x_clkdm, + &dss_am35x_clkdm, + &per_am35x_clkdm, + &usbhost_am35x_clkdm, + &dpll5_clkdm, + NULL +}; + void __init omap3xxx_clockdomains_init(void) { struct clockdomain **sc; + unsigned int rev; if (!cpu_is_omap34xx()) return; clkdm_register_platform_funcs(&omap3_clkdm_operations); - clkdm_register_clkdms(clockdomains_omap3430_common); + clkdm_register_clkdms(clockdomains_common); - sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 : - clockdomains_omap3430es2plus; + rev = omap_rev(); - clkdm_register_clkdms(sc); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + clkdm_register_clkdms(clockdomains_am35x); + clkdm_register_autodeps(clkdm_am35x_autodeps); + } else { + clkdm_register_clkdms(clockdomains_omap3430); + + sc = (rev == OMAP3430_REV_ES1_0) ? + clockdomains_omap3430es1 : clockdomains_omap3430es2plus; + + clkdm_register_clkdms(sc); + clkdm_register_autodeps(clkdm_autodeps); + } - clkdm_register_autodeps(clkdm_autodeps); clkdm_complete_init(); } diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c5342584749..63d60a773d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { @@ -430,8 +430,6 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &l4_wkup_44xx_clkdm, &emu_sys_44xx_clkdm, &l3_dma_44xx_clkdm, - &prm_common_clkdm, - &cm_common_clkdm, NULL }; diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c deleted file mode 100644 index 615b1f04967..00000000000 --- a/arch/arm/mach-omap2/clockdomains_common_data.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * OMAP2+-common clockdomain data - * - * Copyright (C) 2008-2012 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Paul Walmsley, Jouni Högander - */ - -#include <linux/kernel.h> -#include <linux/io.h> - -#include "clockdomain.h" - -/* These are implicit clockdomains - they are never defined as such in TRM */ -struct clockdomain prm_common_clkdm = { - .name = "prm_clkdm", - .pwrdm = { .name = "wkup_pwrdm" }, -}; - -struct clockdomain cm_common_clkdm = { - .name = "cm_clkdm", - .pwrdm = { .name = "core_pwrdm" }, -}; diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h new file mode 100644 index 00000000000..532027ee3d8 --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-33xx.h @@ -0,0 +1,687 @@ +/* + * AM33XX Power Management register bits + * + * This file is automatically generated from the AM33XX hardware databases. + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H + +/* + * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP, + * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER + */ +#define AM33XX_AUTO_DPLL_MODE_SHIFT 0 +#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11) + +/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_CPSW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4 +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9) + +/* Used by CM_GFX_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19 +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20 +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21 +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22 +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26 +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24 +#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_PRUSS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6) + +/* Used by CM_PER_L3S_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3) + +/* Used by CM_L3_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_L4FW_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8) + +/* Used by CM_PER_L4HS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8) + +/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */ +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8) + +/* Used by CM_L4_WKUP_AON_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17 +#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4) + +/* Used by CM_PER_LCDC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7 +#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7) + +/* Used by CM_PER_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3) + +/* Used by CM_MPU_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4) + +/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5) + +/* Used by CM_RTC_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25 +#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15 +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16 +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27 +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28 +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12 +#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12) + +/* Used by CM_PER_L4LS_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0 +#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2DIV_SHIFT 3 +#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2EN_SHIFT 7 +#define AM33XX_CLKOUT2EN_MASK (1 << 7) + +/* Used by CM_CLKOUT_CTRL */ +#define AM33XX_CLKOUT2SOURCE_SHIFT 0 +#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0) + +/* + * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK, + * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK, + * CLKSEL_TIMER7_CLK + */ +#define AM33XX_CLKSEL_SHIFT 0 +#define AM33XX_CLKSEL_MASK (0x01 << 0) + +/* + * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK, + * CM_CPTS_RFT_CLKSEL + */ +#define AM33XX_CLKSEL_0_0_SHIFT 0 +#define AM33XX_CLKSEL_0_0_MASK (1 << 0) + +#define AM33XX_CLKSEL_0_1_SHIFT 0 +#define AM33XX_CLKSEL_0_1_MASK (3 << 0) + +/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */ +#define AM33XX_CLKSEL_0_2_SHIFT 0 +#define AM33XX_CLKSEL_0_2_MASK (7 << 0) + +/* Used by CLKSEL_GFX_FCLK */ +#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1 +#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1) + +/* + * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL, + * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL, + * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL, + * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL, + * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL, + * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL + */ +#define AM33XX_CLKTRCTRL_SHIFT 0 +#define AM33XX_CLKTRCTRL_MASK (0x3 << 0) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR, + * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU, + * CM_SSC_DELTAMSTEP_DPLL_PER + */ +#define AM33XX_DELTAMSTEP_SHIFT 0 +#define AM33XX_DELTAMSTEP_MASK (0x19 << 0) + +/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */ +#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23 +#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12 +#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0) + +/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */ +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_DIV_SHIFT 0 +#define AM33XX_DPLL_DIV_MASK (0x7f << 0) + +#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_DIV_0_7_SHIFT 0 +#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_EN_SHIFT 0 +#define AM33XX_DPLL_EN_MASK (0x7 << 0) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_LPMODE_EN_SHIFT 10 +#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10) + +/* + * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, + * CM_CLKSEL_DPLL_MPU + */ +#define AM33XX_DPLL_MULT_SHIFT 8 +#define AM33XX_DPLL_MULT_MASK (0x7ff << 8) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8 +#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU + */ +#define AM33XX_DPLL_REGM4XEN_SHIFT 11 +#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11) + +/* Used by CM_CLKSEL_DPLL_PERIPH */ +#define AM33XX_DPLL_SD_DIV_SHIFT 24 +#define AM33XX_DPLL_SD_DIV_MASK (24, 31) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_ACK_SHIFT 13 +#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) + +/* + * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + */ +#define AM33XX_DPLL_SSC_EN_SHIFT 12 +#define AM33XX_DPLL_SSC_EN_MASK (1 << 12) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_IDLEST_SHIFT 16 +#define AM33XX_IDLEST_MASK (0x3 << 16) +#define AM33XX_IDLEST_VAL 0x3 + +/* Used by CM_MAC_CLKSEL */ +#define AM33XX_MII_CLK_SEL_SHIFT 2 +#define AM33XX_MII_CLK_SEL_MASK (1 << 2) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8 +#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, + * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER + */ +#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0 +#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, + * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, + * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL, + * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL, + * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL, + * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL, + * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL, + * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL, + * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL, + * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL, + * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL, + * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL, + * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL, + * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL, + * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL, + * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL, + * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL, + * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL, + * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL, + * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL, + * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL, + * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL, + * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL, + * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, + * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, + * CM_CEFUSE_CEFUSE_CLKCTRL + */ +#define AM33XX_MODULEMODE_SHIFT 0 +#define AM33XX_MODULEMODE_MASK (0x3 << 0) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30 +#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19 +#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19) + +/* Used by CM_WKUP_GPIO0_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO1_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO2_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO3_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO4_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO5_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18) + +/* Used by CM_PER_GPIO6_CLKCTRL */ +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18) + +/* + * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL, + * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL, + * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL, + * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL, + * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL, + * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL + */ +#define AM33XX_STBYST_SHIFT 18 +#define AM33XX_STBYST_MASK (1 << 18) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27 +#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_STM_PMD_CLKSEL_SHIFT 22 +#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLK_SHIFT 0 +#define AM33XX_ST_DPLL_CLK_MASK (1 << 0) + +/* Used by CM_CLKDCOLDO_DPLL_PER */ +#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8 +#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8) + +/* + * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER + */ +#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9 +#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9) + +/* Used by CM_DIV_M4_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) + +/* Used by CM_DIV_M5_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) + +/* Used by CM_DIV_M6_DPLL_CORE */ +#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) + +/* + * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, + * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER + */ +#define AM33XX_ST_MN_BYPASS_SHIFT 8 +#define AM33XX_ST_MN_BYPASS_MASK (1 << 8) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24 +#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24) + +/* Used by CM_WKUP_DEBUGSS_CLKCTRL */ +#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20 +#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20) + +/* Used by CONTROL_SEC_CLK_CTRL */ +#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4) +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 8083a8cdc55..766338fe4d3 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -169,8 +169,6 @@ /* AM35XX specific CM_ICLKEN1_CORE bits */ #define AM35XX_EN_IPSS_MASK (1 << 4) #define AM35XX_EN_IPSS_SHIFT 4 -#define AM35XX_EN_UART4_MASK (1 << 23) -#define AM35XX_EN_UART4_SHIFT 23 /* CM_ICLKEN2_CORE */ #define OMAP3430_EN_PKA_MASK (1 << 4) @@ -207,6 +205,8 @@ #define OMAP3430_ST_DES2_MASK (1 << 26) #define OMAP3430_ST_MSPRO_SHIFT 23 #define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define AM35XX_ST_UART4_SHIFT 23 +#define AM35XX_ST_UART4_MASK (1 << 23) #define OMAP3430_ST_HDQ_SHIFT 22 #define OMAP3430_ST_HDQ_MASK (1 << 22) #define OMAP3430ES1_ST_FAC_SHIFT 8 diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c new file mode 100644 index 00000000000..13f56eafef0 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.c @@ -0,0 +1,313 @@ +/* + * AM33XX CM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Reference taken from from OMAP4 cminst44xx.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "cm.h" +#include "cm33xx.h" +#include "cm-regbits-34xx.h" +#include "cm-regbits-33xx.h" +#include "prm33xx.h" + +/* + * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: + * + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed + * + */ +#define CLKCTRL_IDLEST_FUNCTIONAL 0x0 +#define CLKCTRL_IDLEST_INTRANSITION 0x1 +#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 +#define CLKCTRL_IDLEST_DISABLED 0x3 + +/* Private functions */ + +/* Read a register in a CM instance */ +static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(cm_base + inst + idx); +} + +/* Write into a register in a CM */ +static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, cm_base + inst + idx); +} + +/* Read-modify-write a register in CM */ +static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_cm_write_reg(v, inst, idx); + + return v; +} + +static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx); +} + +static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx) +{ + return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); +} + +static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +/** + * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= AM33XX_IDLEST_MASK; + v >>= AM33XX_IDLEST_SHIFT; + return v; +} + +/** + * _is_module_ready - can module registers be accessed without causing an abort? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs); + + return (v == CLKCTRL_IDLEST_FUNCTIONAL || + v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; +} + +/** + * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield + * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * @c must be the unshifted value for CLKTRCTRL - i.e., this function + * will handle the shift itself. + */ +static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= ~AM33XX_CLKTRCTRL_MASK; + v |= c << AM33XX_CLKTRCTRL_SHIFT; + am33xx_cm_write_reg(v, inst, cdoffs); +} + +/* Public functions */ + +/** + * am33xx_cm_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode? + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Returns true if the clockdomain referred to by (@inst, @cdoffs) + * is in hardware-supervised idle mode, or 0 otherwise. + */ +bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, cdoffs); + v &= AM33XX_CLKTRCTRL_MASK; + v >>= AM33XX_CLKTRCTRL_SHIFT; + + return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false; +} + +/** + * am33xx_cm_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * hardware-supervised idle mode. No return value. + */ +void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into + * software-supervised idle mode, i.e., controlled manually by the + * Linux OMAP clockdomain code. No return value. + */ +void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_sleep - try to put a clockdomain into idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Put a clockdomain referred to by (@inst, @cdoffs) into idle + * No return value. + */ +void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); +} + +/** + * am33xx_cm_clkdm_force_wakeup - try to take a clockdomain out of idle + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * + * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, + * waking it up. No return value. + */ +void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); +} + +/* + * + */ + +/** + * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be functional. If the idle state is in any + * the non functional state (trans, idle or disabled), module and thus the + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + */ +int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled' + * state + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Wait for the module IDLEST to be disabled. Some PRCM transition, + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. + */ +int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) == + CLKCTRL_IDLEST_DISABLED), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL + * @mode: Module mode (SW or HW) + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + v |= mode << AM33XX_MODULEMODE_SHIFT; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} + +/** + * am33xx_cm_module_disable - Disable the module inside CLKCTRL + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= ~AM33XX_MODULEMODE_MASK; + am33xx_cm_write_reg(v, inst, clkctrl_offs); +} diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h new file mode 100644 index 00000000000..5fa0b62e1a7 --- /dev/null +++ b/arch/arm/mach-omap2/cm33xx.h @@ -0,0 +1,420 @@ +/* + * AM33XX CM offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_33XX_H + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "common.h" + +#include "cm.h" +#include "cm-regbits-33xx.h" +#include "cm33xx.h" + +/* CM base address */ +#define AM33XX_CM_BASE 0x44e00000 + +#define AM33XX_CM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_CM_BASE + (inst) + (reg)) + +/* CM instances */ +#define AM33XX_CM_PER_MOD 0x0000 +#define AM33XX_CM_WKUP_MOD 0x0400 +#define AM33XX_CM_DPLL_MOD 0x0500 +#define AM33XX_CM_MPU_MOD 0x0600 +#define AM33XX_CM_DEVICE_MOD 0x0700 +#define AM33XX_CM_RTC_MOD 0x0800 +#define AM33XX_CM_GFX_MOD 0x0900 +#define AM33XX_CM_CEFUSE_MOD 0x0A00 + +/* CM */ + +/* CM.PER_CM register offsets */ +#define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_PER_L4LS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000) +#define AM33XX_CM_PER_L3S_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_PER_L3S_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0004) +#define AM33XX_CM_PER_L4FW_CLKSTCTRL_OFFSET 0x0008 +#define AM33XX_CM_PER_L4FW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008) +#define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET 0x000c +#define AM33XX_CM_PER_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c) +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_PER_CPGMAC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014) +#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET 0x0018 +#define AM33XX_CM_PER_LCDC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018) +#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET 0x001c +#define AM33XX_CM_PER_USB0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c) +#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_PER_MLB_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020) +#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0024 +#define AM33XX_CM_PER_TPTC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024) +#define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0028 +#define AM33XX_CM_PER_EMIF_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028) +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x002c +#define AM33XX_CM_PER_OCMCRAM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c) +#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0030 +#define AM33XX_CM_PER_GPMC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030) +#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0034 +#define AM33XX_CM_PER_MCASP0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034) +#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET 0x0038 +#define AM33XX_CM_PER_UART5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038) +#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x003c +#define AM33XX_CM_PER_MMC0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c) +#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0040 +#define AM33XX_CM_PER_ELM_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040) +#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x0044 +#define AM33XX_CM_PER_I2C2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044) +#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x0048 +#define AM33XX_CM_PER_I2C1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048) +#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x004c +#define AM33XX_CM_PER_SPI0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c) +#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0050 +#define AM33XX_CM_PER_SPI1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050) +#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0054 +#define AM33XX_CM_PER_SPI2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054) +#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0058 +#define AM33XX_CM_PER_SPI3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058) +#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0060 +#define AM33XX_CM_PER_L4LS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060) +#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET 0x0064 +#define AM33XX_CM_PER_L4FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064) +#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0068 +#define AM33XX_CM_PER_MCASP1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068) +#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET 0x006c +#define AM33XX_CM_PER_UART1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c) +#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0070 +#define AM33XX_CM_PER_UART2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070) +#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0074 +#define AM33XX_CM_PER_UART3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074) +#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0078 +#define AM33XX_CM_PER_UART4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078) +#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x007c +#define AM33XX_CM_PER_TIMER7_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c) +#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0080 +#define AM33XX_CM_PER_TIMER2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080) +#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0084 +#define AM33XX_CM_PER_TIMER3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084) +#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0088 +#define AM33XX_CM_PER_TIMER4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088) +#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET 0x008c +#define AM33XX_CM_PER_MCASP2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c) +#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET 0x0090 +#define AM33XX_CM_PER_RNG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090) +#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0094 +#define AM33XX_CM_PER_AES0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094) +#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET 0x0098 +#define AM33XX_CM_PER_AES1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098) +#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET 0x009c +#define AM33XX_CM_PER_DES_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c) +#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x00a0 +#define AM33XX_CM_PER_SHA0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0) +#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET 0x00a4 +#define AM33XX_CM_PER_PKA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4) +#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET 0x00a8 +#define AM33XX_CM_PER_GPIO6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8) +#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x00ac +#define AM33XX_CM_PER_GPIO1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac) +#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_PER_GPIO2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0) +#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_PER_GPIO3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4) +#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_PER_GPIO4_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8) +#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_PER_TPCC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc) +#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_PER_DCAN0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0) +#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_PER_DCAN1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4) +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x00cc +#define AM33XX_CM_PER_EPWMSS1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc) +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_PER_EMIF_FW_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0) +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_PER_EPWMSS0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4) +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x00d8 +#define AM33XX_CM_PER_EPWMSS2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8) +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x00dc +#define AM33XX_CM_PER_L3_INSTR_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc) +#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET 0x00e0 +#define AM33XX_CM_PER_L3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0) +#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET 0x00e4 +#define AM33XX_CM_PER_IEEE5000_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4) +#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x00e8 +#define AM33XX_CM_PER_PRUSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8) +#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x00ec +#define AM33XX_CM_PER_TIMER5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec) +#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x00f0 +#define AM33XX_CM_PER_TIMER6_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0) +#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x00f4 +#define AM33XX_CM_PER_MMC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4) +#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x00f8 +#define AM33XX_CM_PER_MMC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8) +#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x00fc +#define AM33XX_CM_PER_TPTC1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc) +#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0100 +#define AM33XX_CM_PER_TPTC2_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100) +#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0104 +#define AM33XX_CM_PER_GPIO5_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104) +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x010c +#define AM33XX_CM_PER_SPINLOCK_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c) +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x0110 +#define AM33XX_CM_PER_MAILBOX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110) +#define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET 0x011c +#define AM33XX_CM_PER_L4HS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c) +#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x0120 +#define AM33XX_CM_PER_L4HS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120) +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET 0x0124 +#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124) +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET 0x0128 +#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128) +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET 0x012c +#define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c) +#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET 0x0130 +#define AM33XX_CM_PER_OCPWP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130) +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET 0x0134 +#define AM33XX_CM_PER_MAILBOX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134) +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET 0x0140 +#define AM33XX_CM_PER_PRUSS_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140) +#define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET 0x0144 +#define AM33XX_CM_PER_CPSW_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144) +#define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET 0x0148 +#define AM33XX_CM_PER_LCDC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148) +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET 0x014c +#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c) +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET 0x0150 +#define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150) + +/* CM.WKUP_CM register offsets */ +#define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_WKUP_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000) +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_WKUP_CONTROL_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004) +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_WKUP_GPIO0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008) +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x000c +#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c) +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_WKUP_TIMER0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010) +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014) +#define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET 0x0018 +#define AM33XX_CM_L3_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018) +#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x001c +#define AM33XX_CM_AUTOIDLE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c) +#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET 0x0020 +#define AM33XX_CM_IDLEST_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0024 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x0028 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028) +#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET 0x002c +#define AM33XX_CM_CLKSEL_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c) +#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET 0x0030 +#define AM33XX_CM_AUTOIDLE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030) +#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET 0x0034 +#define AM33XX_CM_IDLEST_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET 0x0038 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET 0x003c +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c) +#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET 0x0040 +#define AM33XX_CM_CLKSEL_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040) +#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET 0x0044 +#define AM33XX_CM_AUTOIDLE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044) +#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET 0x0048 +#define AM33XX_CM_IDLEST_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET 0x004c +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET 0x0050 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050) +#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET 0x0054 +#define AM33XX_CM_CLKSEL_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054) +#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0058 +#define AM33XX_CM_AUTOIDLE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058) +#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET 0x005c +#define AM33XX_CM_IDLEST_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0060 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x0064 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064) +#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET 0x0068 +#define AM33XX_CM_CLKSEL_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068) +#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET 0x006c +#define AM33XX_CM_AUTOIDLE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c) +#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET 0x0070 +#define AM33XX_CM_IDLEST_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070) +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0074 +#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074) +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x0078 +#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078) +#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET 0x007c +#define AM33XX_CM_CLKDCOLDO_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c) +#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET 0x0080 +#define AM33XX_CM_DIV_M4_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080) +#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET 0x0084 +#define AM33XX_CM_DIV_M5_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084) +#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET 0x0088 +#define AM33XX_CM_CLKMODE_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088) +#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET 0x008c +#define AM33XX_CM_CLKMODE_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c) +#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET 0x0090 +#define AM33XX_CM_CLKMODE_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090) +#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET 0x0094 +#define AM33XX_CM_CLKMODE_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094) +#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET 0x0098 +#define AM33XX_CM_CLKMODE_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098) +#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET 0x009c +#define AM33XX_CM_CLKSEL_DPLL_PERIPH AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c) +#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET 0x00a0 +#define AM33XX_CM_DIV_M2_DPLL_DDR AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0) +#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET 0x00a4 +#define AM33XX_CM_DIV_M2_DPLL_DISP AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4) +#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET 0x00a8 +#define AM33XX_CM_DIV_M2_DPLL_MPU AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8) +#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET 0x00ac +#define AM33XX_CM_DIV_M2_DPLL_PER AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac) +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x00b0 +#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0) +#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x00b4 +#define AM33XX_CM_WKUP_UART0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4) +#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x00b8 +#define AM33XX_CM_WKUP_I2C0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8) +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x00bc +#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc) +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x00c0 +#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0) +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x00c4 +#define AM33XX_CM_WKUP_TIMER1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4) +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x00c8 +#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8) +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET 0x00cc +#define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc) +#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET 0x00d0 +#define AM33XX_CM_WKUP_WDT0_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0) +#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x00d4 +#define AM33XX_CM_WKUP_WDT1_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4) +#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET 0x00d8 +#define AM33XX_CM_DIV_M6_DPLL_CORE AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8) + +/* CM.DPLL_CM register offsets */ +#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET 0x0004 +#define AM33XX_CLKSEL_TIMER7_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004) +#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET 0x0008 +#define AM33XX_CLKSEL_TIMER2_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008) +#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET 0x000c +#define AM33XX_CLKSEL_TIMER3_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c) +#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET 0x0010 +#define AM33XX_CLKSEL_TIMER4_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010) +#define AM33XX_CM_MAC_CLKSEL_OFFSET 0x0014 +#define AM33XX_CM_MAC_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014) +#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET 0x0018 +#define AM33XX_CLKSEL_TIMER5_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018) +#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET 0x001c +#define AM33XX_CLKSEL_TIMER6_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c) +#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET 0x0020 +#define AM33XX_CM_CPTS_RFT_CLKSEL AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020) +#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET 0x0028 +#define AM33XX_CLKSEL_TIMER1MS_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028) +#define AM33XX_CLKSEL_GFX_FCLK_OFFSET 0x002c +#define AM33XX_CLKSEL_GFX_FCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c) +#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET 0x0030 +#define AM33XX_CLKSEL_PRUSS_OCP_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030) +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET 0x0034 +#define AM33XX_CLKSEL_LCDC_PIXEL_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034) +#define AM33XX_CLKSEL_WDT1_CLK_OFFSET 0x0038 +#define AM33XX_CLKSEL_WDT1_CLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038) +#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET 0x003c +#define AM33XX_CLKSEL_GPIO0_DBCLK AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c) + +/* CM.MPU_CM register offsets */ +#define AM33XX_CM_MPU_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_MPU_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000) +#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_MPU_MPU_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004) + +/* CM.DEVICE_CM register offsets */ +#define AM33XX_CM_CLKOUT_CTRL_OFFSET 0x0000 +#define AM33XX_CM_CLKOUT_CTRL AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000) + +/* CM.RTC_CM register offsets */ +#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0000 +#define AM33XX_CM_RTC_RTC_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000) +#define AM33XX_CM_RTC_CLKSTCTRL_OFFSET 0x0004 +#define AM33XX_CM_RTC_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004) + +/* CM.GFX_CM register offsets */ +#define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_GFX_L3_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000) +#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0004 +#define AM33XX_CM_GFX_GFX_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004) +#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET 0x0008 +#define AM33XX_CM_GFX_BITBLT_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008) +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET 0x000c +#define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1 AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c) +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET 0x0010 +#define AM33XX_CM_GFX_MMUCFG_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010) +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET 0x0014 +#define AM33XX_CM_GFX_MMUDATA_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014) + +/* CM.CEFUSE_CM register offsets */ +#define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000 +#define AM33XX_CM_CEFUSE_CLKSTCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000) +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 +#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020) + + +extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); +extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); + +#ifdef CONFIG_SOC_AM33XX +extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs); +#else +static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} +static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 1a39945d9ff..1894015ff04 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -235,20 +235,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs) } /** - * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle - * @part: PRCM partition ID that the clockdomain registers exist in - * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) - * - * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle - * No return value. - */ -void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs) -{ - _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs); -} - -/** * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle * @part: PRCM partition ID that the clockdomain registers exist in * @inst: CM instance register offset (*_INST macro) diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index a018a732787..d69fdefef98 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); - extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - -# ifdef CONFIG_ARCH_OMAP4 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); - -# else - -static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} - -# endif - /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1706ebcec08..14734746457 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; +/* + * ADS7846 driver maybe request a gpio according to the value + * of pdata->get_pendown_state, but we have done this. So set + * get_pendown_state to avoid twice gpio requesting. + */ +static int omap3_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, + .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { @@ -63,28 +74,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - if (board_pdata && board_pdata->get_pendown_state) { - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } - gpio_export(gpio_pendown, 0); - - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; } + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; spi_bi->platform_data = board_pdata; + if (board_pdata->get_pendown_state) + gpio_export(gpio_pendown, 0); } else { ads7846_config.gpio_pendown = gpio_pendown; } + if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) + gpio_free(gpio_pendown); + spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836a..4c4ef6a6166 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,6 +4,7 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K +#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 8a6953a34fe..069f9725b1c 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -29,8 +29,6 @@ /* Global address base setup code */ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - static void __init __omap2_set_globals(struct omap_globals *omap2_globals) { omap2_set_globals_tap(omap2_globals); @@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) omap2_set_globals_prcm(omap2_globals); } -#endif - #if defined(CONFIG_SOC_OMAP2420) static struct omap_globals omap242x_globals = { @@ -134,7 +130,9 @@ void __init ti81xx_map_io(void) { omapti81xx_map_common_io(); } +#endif +#if defined(CONFIG_SOC_AM33XX) #define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ TI81XX_CONTROL_DEVICE_ID - 0x204) @@ -171,9 +169,7 @@ static struct omap_globals omap4_globals = { void __init omap2_set_globals_443x(void) { - omap2_set_globals_tap(&omap4_globals); - omap2_set_globals_control(&omap4_globals); - omap2_set_globals_prcm(&omap4_globals); + __omap2_set_globals(&omap4_globals); } void __init omap4_map_io(void) @@ -182,3 +178,27 @@ void __init omap4_map_io(void) } #endif +#if defined(CONFIG_SOC_OMAP5) +static struct omap_globals omap5_globals = { + .class = OMAP54XX_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE), + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE), +}; + +void __init omap2_set_globals_5xxx(void) +{ + omap2_set_globals_tap(&omap5_globals); + omap2_set_globals_control(&omap5_globals); + omap2_set_globals_prcm(&omap5_globals); +} + +void __init omap5_map_io(void) +{ + omap5_map_common_io(); +} +#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index be9dfd1abe6..1f65b1871c2 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -115,12 +115,22 @@ static inline int omap_mux_late_init(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +extern void omap5_map_common_io(void); +#else +static inline void omap5_map_common_io(void) +{ +} +#endif + extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; +extern struct sys_timer omap5_timer; void omap2420_init_early(void); void omap2430_init_early(void); @@ -128,9 +138,12 @@ void omap3430_init_early(void); void omap35xx_init_early(void); void omap3630_init_early(void); void omap3_init_early(void); /* Do not use this one */ +void am33xx_init_early(void); void am35xx_init_early(void); void ti81xx_init_early(void); +void am33xx_init_early(void); void omap4430_init_early(void); +void omap5_init_early(void); void omap3_init_late(void); /* Do not use this one */ void omap4430_init_late(void); void omap2420_init_late(void); @@ -166,12 +179,18 @@ void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); +void omap2_set_globals_5xxx(void); void omap2_set_globals_ti81xx(void); void omap2_set_globals_am33xx(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); +#if defined(CONFIG_SOC_HAS_OMAP2_SDRC) void omap2_set_globals_sdrc(struct omap_globals *); +#else +static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +{ } +#endif void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); @@ -180,6 +199,7 @@ void omap243x_map_io(void); void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); +void omap5_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); @@ -219,6 +239,8 @@ void omap3_intc_prepare_idle(void); void omap3_intc_resume_idle(void); void omap2_intc_handle_irq(struct pt_regs *regs); void omap3_intc_handle_irq(struct pt_regs *regs); +void omap_intc_of_init(void); +void omap_gic_of_init(void); #ifdef CONFIG_CACHE_L2X0 extern void __iomem *omap4_get_l2cache_base(void); @@ -226,10 +248,10 @@ extern void __iomem *omap4_get_l2cache_base(void); struct device_node; #ifdef CONFIG_OF -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent); #else -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent) { return 0; @@ -256,6 +278,7 @@ extern void omap_secondary_startup(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); +extern void omap5_secondary_startup(void); #endif #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 08e674bb041..3223b81e753 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -241,6 +241,49 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) #endif +/** + * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor + * @bootaddr: physical address of the boot loader + * + * Set boot address for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootaddr, offset); +} + +/** + * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor + * @bootmode: 8-bit value to pass to some boot code + * + * Sets boot mode for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_mode(u8 bootmode) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootmode, offset); +} + #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a406fd045ce..b8cdc8531b6 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,6 +21,8 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> +#include <plat/am33xx.h> + #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -28,6 +30,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #else #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -35,6 +39,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* @@ -182,6 +188,7 @@ #define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120) #define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128) #define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C) +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0) /* OMAP44xx control efuse offsets */ #define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C @@ -246,6 +253,10 @@ /* TI81XX CONTROL_DEVCONF register offsets */ #define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) +/* OMAP54XX CONTROL STATUS register */ +#define OMAP5XXX_CONTROL_STATUS 0x134 +#define OMAP5_DEVICETYPE_MASK (0x7 << 6) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -312,15 +323,15 @@ OMAP343X_SCRATCHPAD + reg) /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ +#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 +#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 +#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 +#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 +#define AM35XX_USBOTG_FCLK_SHIFT 8 +#define AM35XX_CPGMAC_FCLK_SHIFT 9 +#define AM35XX_VPFE_FCLK_SHIFT 10 + +/* AM35XX CONTROL_LVL_INTR_CLEAR bits */ #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) #define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) #define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) @@ -330,21 +341,22 @@ #define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) #define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) -/*AM35XX CONTROL_IP_SW_RESET bits*/ +/* AM35XX CONTROL_IP_SW_RESET bits */ #define AM35XX_USBOTGSS_SW_RST BIT(0) #define AM35XX_CPGMACSS_SW_RST BIT(1) #define AM35XX_VPFE_VBUSP_SW_RST BIT(2) #define AM35XX_HECC_SW_RST BIT(3) #define AM35XX_VPFE_PCLK_SW_RST BIT(4) -/* - * CONTROL AM33XX STATUS register - */ +/* AM33XX CONTROL_STATUS register */ #define AM33XX_CONTROL_STATUS 0x040 +#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ +/* AM33XX CONTROL_STATUS bitfields (partial) */ +#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 +#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) + +/* CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c #define OMAP3_SGX_SHIFT 13 @@ -397,6 +409,8 @@ extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); extern void omap3_ctrl_write_boot_mode(u8 bootmode); +extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); +extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); #else diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 207bc1c7759..f2a49a48ef5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,8 +36,6 @@ #include "control.h" #include "common.h" -#ifdef CONFIG_CPU_IDLE - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; @@ -77,20 +75,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = { static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; -static int _cpuidle_allow_idle(struct powerdomain *pwrdm, - struct clockdomain *clkdm) -{ - clkdm_allow_idle(clkdm); - return 0; -} - -static int _cpuidle_deny_idle(struct powerdomain *pwrdm, - struct clockdomain *clkdm) -{ - clkdm_deny_idle(clkdm); - return 0; -} - static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -108,8 +92,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, /* Deny idle for C1 */ if (index == 0) { - pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); - pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); + clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]); + clkdm_deny_idle(core_pd->pwrdm_clkdms[0]); } /* @@ -131,8 +115,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, /* Re-allow idle for C1 */ if (index == 0) { - pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); - pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); + clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); + clkdm_allow_idle(core_pd->pwrdm_clkdms[0]); } return_sleep_time: @@ -178,7 +162,7 @@ static int next_valid_state(struct cpuidle_device *dev, u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; int idx; - int next_index = -1; + int next_index = 0; /* C1 is the default value */ if (enable_off_mode) { mpu_deepest_state = PWRDM_POWER_OFF; @@ -209,12 +193,6 @@ static int next_valid_state(struct cpuidle_device *dev, } } - /* - * C1 is always valid. - * So, no need to check for 'next_index == -1' outside - * this loop. - */ - return next_index; } @@ -228,23 +206,22 @@ static int next_valid_state(struct cpuidle_device *dev, * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, - struct cpuidle_driver *drv, + struct cpuidle_driver *drv, int index) { int new_state_idx; - u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0; struct omap3_idle_statedata *cx; int ret; /* - * Prevent idle completely if CAM is active. + * Use only C1 if CAM is active. * CAM does not have wakeup capability in OMAP3. */ - cam_state = pwrdm_read_pwrst(cam_pd); - if (cam_state == PWRDM_POWER_ON) { + if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON) new_state_idx = drv->safe_state_index; - goto select_state; - } + else + new_state_idx = next_valid_state(dev, drv, index); /* * FIXME: we currently manage device-specific idle states @@ -254,24 +231,28 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * its own code. */ - /* - * Prevent PER off if CORE is not in retention or off as this - * would disable PER wakeups completely. - */ - cx = &omap3_idle_data[index]; + /* Program PER state */ + cx = &omap3_idle_data[new_state_idx]; core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); - if ((per_next_state == PWRDM_POWER_OFF) && - (core_next_state > PWRDM_POWER_RET)) - per_next_state = PWRDM_POWER_RET; + if (new_state_idx == 0) { + /* In C1 do not allow PER state lower than CORE state */ + if (per_next_state < core_next_state) + per_next_state = core_next_state; + } else { + /* + * Prevent PER OFF if CORE is not in RETention or OFF as this + * would disable PER wakeups completely. + */ + if ((per_next_state == PWRDM_POWER_OFF) && + (core_next_state > PWRDM_POWER_RET)) + per_next_state = PWRDM_POWER_RET; + } /* Are we changing PER target state? */ if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state_idx = next_valid_state(dev, drv, index); - -select_state: ret = omap3_enter_idle(dev, drv, new_state_idx); /* Restore original PER state if it was modified */ @@ -288,7 +269,7 @@ struct cpuidle_driver omap3_idle_driver = { .owner = THIS_MODULE, .states = { { - .enter = omap3_enter_idle, + .enter = omap3_enter_idle_bm, .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, @@ -379,9 +360,3 @@ int __init omap3_idle_init(void) return 0; } -#else -int __init omap3_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index be1617ca84b..02d15bbd4e3 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -22,8 +22,6 @@ #include "pm.h" #include "prm.h" -#ifdef CONFIG_CPU_IDLE - /* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; @@ -199,9 +197,3 @@ int __init omap4_idle_init(void) return 0; } -#else -int __init omap4_idle_init(void) -{ - return 0; -} -#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7b4b9327e54..c00c68961bb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,7 +27,6 @@ #include "iomap.h" #include <plat/board.h> -#include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -84,7 +83,7 @@ static int __init omap4_l3_init(void) * To avoid code running on other OMAPs in * multi-omap builds */ - if (!(cpu_is_omap44xx())) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return -ENODEV; for (i = 0; i < L3_MODULES; i++) { @@ -603,112 +602,6 @@ static inline void omap_init_aes(void) { } /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -static inline void omap242x_mmc_mux(struct omap_mmc_platform_data - *mmc_controller) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - - omap_mux_init_signal("sdmmc_cmd", 0); - omap_mux_init_signal("sdmmc_clki", 0); - omap_mux_init_signal("sdmmc_clko", 0); - omap_mux_init_signal("sdmmc_dat0", 0); - omap_mux_init_signal("sdmmc_dat_dir0", 0); - omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { - omap_mux_init_signal("sdmmc_dat1", 0); - omap_mux_init_signal("sdmmc_dat2", 0); - omap_mux_init_signal("sdmmc_dat3", 0); - omap_mux_init_signal("sdmmc_dat_dir1", 0); - omap_mux_init_signal("sdmmc_dat_dir2", 0); - omap_mux_init_signal("sdmmc_dat_dir3", 0); - } - - /* - * Use internal loop-back in MMC/SDIO Module Input Clock - * selection - */ - if (mmc_controller->slots[0].internal_clock) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } -} - -void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - int id = 0; - char *oh_name = "msdi1"; - char *dev_name = "mmci-omap"; - - if (!mmc_data[0]) { - pr_err("%s fails: Incomplete platform data\n", __func__); - return; - } - - omap242x_mmc_mux(mmc_data[0]); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } - pdev = omap_device_build(dev_name, id, oh, mmc_data[0], - sizeof(struct omap_mmc_platform_data), NULL, 0, 0); - if (IS_ERR(pdev)) - WARN(1, "Can'd build omap_device for %s:%s.\n", - dev_name, oh->name); -} - -#endif - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) -#define OMAP_HDQ_BASE 0x480B2000 -static struct resource omap_hdq_resources[] = { - { - .start = OMAP_HDQ_BASE, - .end = OMAP_HDQ_BASE + 0x1C, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_24XX_HDQ_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; -static struct platform_device omap_hdq_dev = { - .name = "omap_hdq", - .id = 0, - .dev = { - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(omap_hdq_resources), - .resource = omap_hdq_resources, -}; -static inline void omap_hdq_init(void) -{ - if (cpu_is_omap2420()) - return; - - platform_device_register(&omap_hdq_dev); -} -#else -static inline void omap_hdq_init(void) {} -#endif - -/*---------------------------------------------------------------------------*/ - #if defined(CONFIG_VIDEO_OMAP2_VOUT) || \ defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE) #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) @@ -753,7 +646,6 @@ static int __init omap2_init_devices(void) omap_init_mcspi(); } omap_init_pmu(); - omap_hdq_init(); omap_init_sti(); omap_init_sham(); omap_init_aes(); @@ -772,7 +664,7 @@ static int __init omap_init_wdt(void) char *oh_name = "wd_timer2"; char *dev_name = "omap_wdt"; - if (!cpu_class_is_omap2()) + if (!cpu_class_is_omap2() || of_have_populated_dt()) return 0; oh = omap_hwmod_lookup(oh_name); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 5fb47a14f4b..af1ed7d24a1 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -37,6 +37,7 @@ #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 +#define DISPC_CONTROL3 0x0848 #define DISPC_IRQSTATUS 0x0018 #define DSS_SYSCONFIG 0x10 @@ -52,6 +53,7 @@ #define EVSYNC_EVEN_IRQ_SHIFT 2 #define EVSYNC_ODD_IRQ_SHIFT 3 #define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONE3_IRQ_SHIFT 30 #define FRAMEDONETV_IRQ_SHIFT 24 /* @@ -376,7 +378,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) static void dispc_disable_outputs(void) { u32 v, irq_mask = 0; - bool lcd_en, digit_en, lcd2_en = false; + bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; int i; struct omap_dss_dispc_dev_attr *da; struct omap_hwmod *oh; @@ -405,7 +407,13 @@ static void dispc_disable_outputs(void) lcd2_en = v & LCD_EN_MASK; } - if (!(lcd_en | digit_en | lcd2_en)) + /* store value of LCDENABLE for LCD3 */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + lcd3_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) return; /* no managers currently enabled */ /* @@ -426,10 +434,12 @@ static void dispc_disable_outputs(void) if (lcd2_en) irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + if (lcd3_en) + irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; /* * clear any previous FRAMEDONE, FRAMEDONETV, - * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts */ omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); @@ -445,12 +455,19 @@ static void dispc_disable_outputs(void) omap_hwmod_write(v, oh, DISPC_CONTROL2); } + /* disable LCD3 manager */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL3); + } + i = 0; while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != irq_mask) { i++; if (i > FRAMEDONE_IRQ_TIMEOUT) { - pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); break; } mdelay(1); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f0f10beeffe..b9c8d2f6a81 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) */ static int _omap3_noncore_dpll_lock(struct clk *clk) { + const struct dpll_data *dd; u8 ai; - int r; + u8 state = 1; + int r = 0; pr_debug("clock: locking DPLL %s\n", clk->name); + dd = clk->dpll_data; + state <<= __ffs(dd->idlest_mask); + + /* Check if already locked */ + if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state) + goto done; + ai = omap3_dpll_autoidle_read(clk); if (ai) @@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); +done: return r; } @@ -628,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) rate = clk->parent->rate * 2; return rate; } + +/* OMAP3/4 non-CORE DPLL clkops */ + +const struct clkops clkops_omap3_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; + +const struct clkops clkops_omap3_core_dpll_ops = { + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c new file mode 100644 index 00000000000..72e0f01b715 --- /dev/null +++ b/arch/arm/mach-omap2/drm.c @@ -0,0 +1,61 @@ +/* + * DRM/KMS device registration for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/omap_device.h> +#include <plat/omap_hwmod.h> + +#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) + +static struct platform_device omap_drm_device = { + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .name = "omapdrm", + .id = 0, +}; + +static int __init omap_init_drm(void) +{ + struct omap_hwmod *oh = NULL; + struct platform_device *pdev; + + /* lookup and populate the DMM information, if present - OMAP4+ */ + oh = omap_hwmod_lookup("dmm"); + + if (oh) { + pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0, + false); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", + oh->name); + } + + return platform_device_register(&omap_drm_device); + +} + +arch_initcall(omap_init_drm); + +#endif diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 88ffa1e645c..a636ebc16b3 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -23,6 +23,7 @@ #include <asm/memblock.h> +#include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS @@ -46,6 +47,9 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { .dsp_cm_read = omap2_cm_read_mod_reg, .dsp_cm_write = omap2_cm_write_mod_reg, .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, + + .set_bootaddr = omap_ctrl_write_dsp_boot_addr, + .set_bootmode = omap_ctrl_write_dsp_boot_mode, }; static phys_addr_t omap_dsp_phys_mempool_base; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2286410671e..b2b5759ab0f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -727,7 +727,8 @@ static int __init gpmc_init(void) ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; gpmc_irq = INT_34XX_GPMC_IRQ; - } else if (cpu_is_omap44xx()) { + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { + /* Base address and irq number are same for OMAP4/5 */ ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; gpmc_irq = OMAP44XX_IRQ_GPMC; diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index 297ebe03f09..cdd6dda0382 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -22,7 +22,13 @@ * 02110-1301 USA */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> + #include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include <plat/hdq1w.h> #include "common.h" @@ -70,3 +76,23 @@ int omap_hdq1w_reset(struct omap_hwmod *oh) return 0; } + +static int __init omap_init_hdq(void) +{ + int id = -1; + struct platform_device *pdev; + struct omap_hwmod *oh; + char *oh_name = "hdq1w"; + char *devname = "omap_hdq"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) + return 0; + + pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", + devname, oh->name); + + return 0; +} +arch_initcall(omap_init_hdq); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 00486a8564f..40373db649a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -44,12 +44,17 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (cpu_is_am33xx()) { + } else if (soc_is_am33xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); + } else if (soc_is_omap54xx()) { + val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); + val &= OMAP5_DEVICETYPE_MASK; + val >>= 6; + goto out; } else { pr_err("Cannot detect omap type!\n"); goto out; @@ -100,7 +105,7 @@ static u16 tap_prod_id; void omap_get_die_id(struct omap_die_id *odi) { - if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx() || soc_is_omap54xx()) { odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); @@ -189,7 +194,7 @@ static void __init omap3_cpuinfo(void) cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { cpu_name = "TI816X"; - } else if (cpu_is_am335x()) { + } else if (soc_is_am335x()) { cpu_name = "AM335X"; } else if (cpu_is_ti814x()) { cpu_name = "TI814X"; @@ -513,6 +518,41 @@ void __init omap4xxx_check_revision(void) ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); } +void __init omap5xxx_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + switch (hawkeye) { + case 0xb942: + switch (rev) { + case 0: + default: + omap_revision = OMAP5430_REV_ES1_0; + } + break; + + case 0xb998: + switch (rev) { + case 0: + default: + omap_revision = OMAP5432_REV_ES1_0; + } + break; + + default: + /* Unknown default to latest silicon rev as default*/ + omap_revision = OMAP5430_REV_ES1_0; + } + + pr_info("OMAP%04x ES%d.0\n", + omap_rev() >> 16, ((omap_rev() >> 12) & 0xf)); +} + /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index f1e13d1ca5e..95594495fcf 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -36,6 +36,8 @@ #define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) #define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) #define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ + AM35XX_EMAC_MDIO_OFFSET) #define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) #define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ AM3517_EMAC_CNTRL_RAM_OFFSET) diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h index 2f7ac70a20d..01970824e0e 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h @@ -42,6 +42,7 @@ #define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 #define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 #define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 +#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 #define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index cdfc2a1f0e7..93d10de7129 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -60,18 +60,20 @@ omap_uart_lsr: .word 0 beq 23f @ configure OMAP2UART3 cmp \rp, #OMAP3UART3 @ only on 34xx beq 33f @ configure OMAP3UART3 - cmp \rp, #OMAP4UART3 @ only on 44xx - beq 43f @ configure OMAP4UART3 + cmp \rp, #OMAP4UART3 @ only on 44xx/54xx + beq 43f @ configure OMAP4/5UART3 cmp \rp, #OMAP3UART4 @ only on 36xx beq 34f @ configure OMAP3UART4 - cmp \rp, #OMAP4UART4 @ only on 44xx - beq 44f @ configure OMAP4UART4 + cmp \rp, #OMAP4UART4 @ only on 44xx/54xx + beq 44f @ configure OMAP4/5UART4 cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different beq 81f @ configure UART1 cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different beq 82f @ configure UART2 cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different beq 83f @ configure UART3 + cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different + beq 84f @ configure UART1 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -100,7 +102,9 @@ omap_uart_lsr: .word 0 b 98f 83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f - +84: ldr \rp, =AM33XX_UART1_BASE + and \rp, \rp, #0x00ffffff + b 97f 95: ldr \rp, =ZOOM_UART_BASE str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT @@ -109,6 +113,17 @@ omap_uart_lsr: .word 0 str \rp, [\tmp, #8] @ omap_uart_lsr b 10b + /* AM33XX: Store both phys and virt address for the uart */ +97: add \rp, \rp, #0x44000000 @ phys base + str \rp, [\tmp, #0] @ omap_uart_phys + sub \rp, \rp, #0x44000000 @ phys base + add \rp, \rp, #0xf9000000 @ virt base + str \rp, [\tmp, #4] @ omap_uart_virt + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + str \rp, [\tmp, #8] @ omap_uart_lsr + + b 10b + /* Store both phys and virt address for the uart */ 98: add \rp, \rp, #0x48000000 @ phys base str \rp, [\tmp, #0] @ omap_uart_phys diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h index 548de90b58c..b0fd16f5c39 100644 --- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h @@ -11,15 +11,20 @@ #ifndef OMAP_ARCH_WAKEUPGEN_H #define OMAP_ARCH_WAKEUPGEN_H +/* OMAP4 and OMAP5 has same base address */ +#define OMAP_WKUPGEN_BASE 0x48281000 + #define OMAP_WKG_CONTROL_0 0x00 #define OMAP_WKG_ENB_A_0 0x10 #define OMAP_WKG_ENB_B_0 0x14 #define OMAP_WKG_ENB_C_0 0x18 #define OMAP_WKG_ENB_D_0 0x1c +#define OMAP_WKG_ENB_E_0 0x20 #define OMAP_WKG_ENB_A_1 0x410 #define OMAP_WKG_ENB_B_1 0x414 #define OMAP_WKG_ENB_C_1 0x418 #define OMAP_WKG_ENB_D_1 0x41c +#define OMAP_WKG_ENB_E_1 0x420 #define OMAP_AUX_CORE_BOOT_0 0x800 #define OMAP_AUX_CORE_BOOT_1 0x804 #define OMAP_PTMSYNCREQ_MASK 0xc00 @@ -28,4 +33,6 @@ #define OMAP_TIMESTAMPCYCLEHI 0xc0c extern int __init omap_wakeupgen_init(void); +extern void __iomem *omap_get_wakeupgen_base(void); +extern int omap_secure_apis_support(void); #endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 8d014ba04ab..4d2d981ff5c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -38,6 +38,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "common.h" +#include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" @@ -233,6 +234,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_SOC_OMAP5 +static struct map_desc omap54xx_io_desc[] __initdata = { + { + .virtual = L3_54XX_VIRT, + .pfn = __phys_to_pfn(L3_54XX_PHYS), + .length = L3_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_54XX_VIRT, + .pfn = __phys_to_pfn(L4_54XX_PHYS), + .length = L4_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WK_54XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_54XX_PHYS), + .length = L4_WK_54XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER_54XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_54XX_PHYS), + .length = L4_PER_54XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif + #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_common_io(void) { @@ -278,6 +308,12 @@ void __init omap44xx_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +void __init omap5_map_common_io(void) +{ + iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); +} +#endif /* * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters * @@ -477,6 +513,20 @@ void __init ti81xx_init_late(void) } #endif +#ifdef CONFIG_SOC_AM33XX +void __init am33xx_init_early(void) +{ + omap2_set_globals_am33xx(); + omap3xxx_check_revision(); + ti81xx_check_features(); + omap_common_init_early(); + am33xx_voltagedomains_init(); + am33xx_powerdomains_init(); + am33xx_clockdomains_init(); + am33xx_clk_init(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { @@ -500,6 +550,15 @@ void __init omap4430_init_late(void) } #endif +#ifdef CONFIG_SOC_OMAP5 +void __init omap5_init_early(void) +{ + omap2_set_globals_5xxx(); + omap5xxx_check_revision(); + omap_common_init_early(); +} +#endif + void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h index 80b88921fab..cce2b65039f 100644 --- a/arch/arm/mach-omap2/iomap.h +++ b/arch/arm/mach-omap2/iomap.h @@ -1,6 +1,14 @@ /* * IO mappings for OMAP2+ * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -166,4 +174,23 @@ /* 0x49000000 --> 0xfb000000 */ #define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_ABE_44XX_SIZE SZ_1M +/* + * ---------------------------------------------------------------------------- + * Omap5 specific IO mapping + * ---------------------------------------------------------------------------- + */ +#define L3_54XX_PHYS L3_54XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_54XX_VIRT (L3_54XX_PHYS + OMAP4_L3_IO_OFFSET) +#define L3_54XX_SIZE SZ_1M + +#define L4_54XX_PHYS L4_54XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_54XX_VIRT (L4_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_54XX_SIZE SZ_4M + +#define L4_WK_54XX_PHYS L4_WK_54XX_BASE /* 0x4ae00000 --> 0xfce00000 */ +#define L4_WK_54XX_VIRT (L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WK_54XX_SIZE SZ_2M +#define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER_54XX_SIZE SZ_4M diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6038a8c84b7..bcd83db41bb 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -21,6 +21,7 @@ #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <mach/hardware.h> @@ -258,11 +259,11 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs omap_intc_handle_irq(base_addr, regs); } -int __init omap_intc_of_init(struct device_node *node, +int __init intc_of_init(struct device_node *node, struct device_node *parent) { struct resource res; - u32 nr_irqs = 96; + u32 nr_irq = 96; if (WARN_ON(!node)) return -ENODEV; @@ -272,15 +273,25 @@ int __init omap_intc_of_init(struct device_node *node, return -EINVAL; } - if (of_property_read_u32(node, "ti,intc-size", &nr_irqs)) - pr_warn("unable to get intc-size, default to %d\n", nr_irqs); + if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) + pr_warn("unable to get intc-size, default to %d\n", nr_irq); - omap_init_irq(res.start, nr_irqs, of_node_get(node)); + omap_init_irq(res.start, nr_irq, of_node_get(node)); return 0; } -#ifdef CONFIG_ARCH_OMAP3 +static struct of_device_id irq_match[] __initdata = { + { .compatible = "ti,omap2-intc", .data = intc_of_init, }, + { } +}; + +void __init omap_intc_of_init(void) +{ + of_irq_init(irq_match); +} + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; void omap_intc_save_context(void) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 19b8b677486..6875be837d9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -83,8 +83,6 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) l = mbox_read_reg(MAILBOX_REVISION); pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - omap2_mbox_enable_irq(mbox, IRQ_RX); - return 0; } diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index ef2a6924731..fb5bc6cf377 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -22,11 +22,15 @@ */ #include <linux/kernel.h> +#include <linux/err.h> #include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include <plat/mmc.h> #include "common.h" +#include "control.h" +#include "mux.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register @@ -86,3 +90,72 @@ int omap_msdi_reset(struct omap_hwmod *oh) return 0; } + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +static inline void omap242x_mmc_mux(struct omap_mmc_platform_data + *mmc_controller) +{ + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + + omap_mux_init_signal("sdmmc_cmd", 0); + omap_mux_init_signal("sdmmc_clki", 0); + omap_mux_init_signal("sdmmc_clko", 0); + omap_mux_init_signal("sdmmc_dat0", 0); + omap_mux_init_signal("sdmmc_dat_dir0", 0); + omap_mux_init_signal("sdmmc_cmd_dir", 0); + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { + omap_mux_init_signal("sdmmc_dat1", 0); + omap_mux_init_signal("sdmmc_dat2", 0); + omap_mux_init_signal("sdmmc_dat3", 0); + omap_mux_init_signal("sdmmc_dat_dir1", 0); + omap_mux_init_signal("sdmmc_dat_dir2", 0); + omap_mux_init_signal("sdmmc_dat_dir3", 0); + } + + /* + * Use internal loop-back in MMC/SDIO Module Input Clock + * selection + */ + if (mmc_controller->slots[0].internal_clock) { + u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + } +} + +void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ + struct platform_device *pdev; + struct omap_hwmod *oh; + int id = 0; + char *oh_name = "msdi1"; + char *dev_name = "mmci-omap"; + + if (!mmc_data[0]) { + pr_err("%s fails: Incomplete platform data\n", __func__); + return; + } + + omap242x_mmc_mux(mmc_data[0]); + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return; + } + pdev = omap_device_build(dev_name, id, oh, mmc_data[0], + sizeof(struct omap_mmc_platform_data), NULL, 0, 0); + if (IS_ERR(pdev)) + WARN(1, "Can'd build omap_device for %s:%s.\n", + dev_name, oh->name); +} + +#endif diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 503ac777a2b..502e3135aad 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -19,6 +19,27 @@ #include <linux/init.h> __CPUINIT + +/* Physical address needed since MMU not enabled yet on secondary core */ +#define AUX_CORE_BOOT0_PA 0x48281800 + +/* + * OMAP5 specific entry point for secondary CPU to jump from ROM + * code. This routine also provides a holding flag into which + * secondary core is held until we're ready for it to initialise. + * The primary core will update this flag using a hardware ++ * register AuxCoreBoot0. + */ +ENTRY(omap5_secondary_startup) +wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 + ldr r0, [r2] + mov r0, r0, lsr #5 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne wait + b secondary_startup +END(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 56c345b8b93..414083b427d 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -17,8 +17,10 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/io.h> #include <asm/cacheflush.h> +#include <mach/omap-wakeupgen.h> #include "common.h" @@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu) */ void __ref platform_cpu_die(unsigned int cpu) { - unsigned int this_cpu; + unsigned int boot_cpu = 0; + void __iomem *base = omap_get_wakeupgen_base(); flush_cache_all(); dsb(); @@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu) /* * we're ready for shutdown now, so do it */ - if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) - pr_err("Secure clear status failed\n"); + if (omap_secure_apis_support()) { + if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) + pr_err("Secure clear status failed\n"); + } else { + __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0); + } + for (;;) { /* * Enter into low power state */ omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF); - this_cpu = smp_processor_id(); - if (omap_read_auxcoreboot0() == this_cpu) { + + if (omap_secure_apis_support()) + boot_cpu = omap_read_auxcoreboot0(); + else + boot_cpu = + __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5; + + if (boot_cpu == smp_processor_id()) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index ac49384d028..1be8bcb52e9 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -73,19 +73,17 @@ static struct iommu_device omap4_devices[] = { .da_end = 0xFFFFF000, }, }, -#if defined(CONFIG_MPU_TESLA_IOMMU) { .base = OMAP4_MMU2_BASE, - .irq = INT_44XX_DSP_MMU, + .irq = OMAP44XX_IRQ_TESLA_MMU, .pdata = { .name = "tesla", .nr_tlb_entries = 32, - .clk_name = "tesla_ick", + .clk_name = "dsp_fck", .da_start = 0x0, .da_end = 0xFFFFF000, }, }, -#endif }; #define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 13670aa84e5..637a1bdf2ac 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -255,7 +255,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) return -ENXIO; } - pwrdm_pre_transition(); + pwrdm_pre_transition(NULL); /* * Check MPUSS next state and save interrupt controller if needed. @@ -287,7 +287,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) wakeup_cpu = smp_processor_id(); set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON); - pwrdm_post_transition(); + pwrdm_post_transition(NULL); return 0; } @@ -313,7 +313,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) scu_pwrst_prepare(cpu, power_state); /* - * CPU never retuns back if targetted power state is OFF mode. + * CPU never retuns back if targeted power state is OFF mode. * CPU ONLINE follows normal CPU ONLINE ptah via * omap_secondary_startup(). */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index deffbf1c962..9a35adf9123 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -26,11 +26,19 @@ #include <mach/hardware.h> #include <mach/omap-secure.h> +#include <mach/omap-wakeupgen.h> +#include <asm/cputype.h> #include "iomap.h" #include "common.h" #include "clockdomain.h" +#define CPU_MASK 0xff0ffff0 +#define CPU_CORTEX_A9 0x410FC090 +#define CPU_CORTEX_A15 0x410FC0F0 + +#define OMAP5_CORE_COUNT 0x2 + /* SCU base address */ static void __iomem *scu_base; @@ -73,6 +81,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; + void __iomem *base = omap_get_wakeupgen_base(); + /* * Set synchronisation state between this boot processor * and the secondary one @@ -85,7 +95,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - omap_modify_auxcoreboot0(0x200, 0xfffffdff); + if (omap_secure_apis_support()) + omap_modify_auxcoreboot0(0x200, 0xfffffdff); + else + __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); + flush_cache_all(); smp_wmb(); @@ -111,7 +125,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) booted = true; } - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); /* * Now the secondary core is starting up let it run its @@ -124,13 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init wakeup_secondary(void) { + void __iomem *base = omap_get_wakeupgen_base(); /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + if (omap_secure_apis_support()) + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + else + __raw_writel(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); + smp_wmb(); /* @@ -147,16 +167,21 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { - unsigned int i, ncores; - - /* - * Currently we can't call ioremap here because - * SoC detection won't work until after init_early. - */ - scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); - BUG_ON(!scu_base); - - ncores = scu_get_core_count(scu_base); + unsigned int i = 0, ncores = 1, cpu_id; + + /* Use ARM cpuid check here, as SoC detection will not work so early */ + cpu_id = read_cpuid(CPUID_ID) & CPU_MASK; + if (cpu_id == CPU_CORTEX_A9) { + /* + * Currently we can't call ioremap here because + * SoC detection won't work until after init_early. + */ + scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); + BUG_ON(!scu_base); + ncores = scu_get_core_count(scu_base); + } else if (cpu_id == CPU_CORTEX_A15) { + ncores = OMAP5_CORE_COUNT; + } /* sanity check */ if (ncores > nr_cpu_ids) { @@ -178,6 +203,7 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * Initialise the SCU and wake up the secondary core using * wakeup_secondary(). */ - scu_enable(scu_base); + if (scu_base) + scu_enable(scu_base); wakeup_secondary(); } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index d811c779035..05fdebfaa19 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -33,18 +33,23 @@ #include "omap4-sar-layout.h" #include "common.h" -#define NR_REG_BANKS 4 -#define MAX_IRQS 128 +#define MAX_NR_REG_BANKS 5 +#define MAX_IRQS 160 #define WKG_MASK_ALL 0x00000000 #define WKG_UNMASK_ALL 0xffffffff #define CPU_ENA_OFFSET 0x400 #define CPU0_ID 0x0 #define CPU1_ID 0x1 +#define OMAP4_NR_BANKS 4 +#define OMAP4_NR_IRQS 128 static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_banks = MAX_NR_REG_BANKS; +static unsigned int max_irqs = MAX_IRQS; +static unsigned int omap_secure_apis; /* * Static helper functions. @@ -146,13 +151,13 @@ static void wakeupgen_unmask(struct irq_data *d) } #ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); +static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks); static void _wakeupgen_save_masks(unsigned int cpu) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); } @@ -160,7 +165,7 @@ static void _wakeupgen_restore_masks(unsigned int cpu) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); } @@ -168,7 +173,7 @@ static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) { u8 i; - for (i = 0; i < NR_REG_BANKS; i++) + for (i = 0; i < irq_banks; i++) wakeupgen_writel(reg, i, cpu); } @@ -196,25 +201,14 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) #endif #ifdef CONFIG_CPU_PM -/* - * Save WakeupGen interrupt context in SAR BANK3. Restore is done by - * ROM code. WakeupGen IP is integrated along with GIC to manage the - * interrupt wakeups from CPU low power states. It manages - * masking/unmasking of Shared peripheral interrupts(SPI). So the - * interrupt enable/disable control should be in sync and consistent - * at WakeupGen and GIC so that interrupts are not lost. - */ -static void irq_save_context(void) +static inline void omap4_irq_save_context(void) { u32 i, val; if (omap_rev() == OMAP4430_REV_ES1_0) return; - if (!sar_base) - sar_base = omap4_get_sar_ram_base(); - - for (i = 0; i < NR_REG_BANKS; i++) { + for (i = 0; i < irq_banks; i++) { /* Save the CPUx interrupt mask for IRQ 0 to 127 */ val = wakeupgen_readl(i, 0); sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i); @@ -254,6 +248,53 @@ static void irq_save_context(void) val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + +} + +static inline void omap5_irq_save_context(void) +{ + u32 i, val; + + for (i = 0; i < irq_banks; i++) { + /* Save the CPUx interrupt mask for IRQ 0 to 159 */ + val = wakeupgen_readl(i, 0); + sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i); + val = wakeupgen_readl(i, 1); + sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i); + sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i); + sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i); + } + + /* Save AuxBoot* registers */ + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); + + /* Set the Backup Bit Mask status */ + val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + val |= SAR_BACKUP_STATUS_WAKEUPGEN; + __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + +} + +/* + * Save WakeupGen interrupt context in SAR BANK3. Restore is done by + * ROM code. WakeupGen IP is integrated along with GIC to manage the + * interrupt wakeups from CPU low power states. It manages + * masking/unmasking of Shared peripheral interrupts(SPI). So the + * interrupt enable/disable control should be in sync and consistent + * at WakeupGen and GIC so that interrupts are not lost. + */ +static void irq_save_context(void) +{ + if (!sar_base) + sar_base = omap4_get_sar_ram_base(); + + if (soc_is_omap54xx()) + omap5_irq_save_context(); + else + omap4_irq_save_context(); } /* @@ -262,9 +303,14 @@ static void irq_save_context(void) static void irq_sar_clear(void) { u32 val; - val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + u32 offset = SAR_BACKUP_STATUS_OFFSET; + + if (soc_is_omap54xx()) + offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; + + val = __raw_readl(sar_base + offset); val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + __raw_writel(val, sar_base + offset); } /* @@ -336,13 +382,25 @@ static struct notifier_block irq_notifier_block = { static void __init irq_pm_init(void) { - cpu_pm_register_notifier(&irq_notifier_block); + /* FIXME: Remove this when MPU OSWR support is added */ + if (!soc_is_omap54xx()) + cpu_pm_register_notifier(&irq_notifier_block); } #else static void __init irq_pm_init(void) {} #endif +void __iomem *omap_get_wakeupgen_base(void) +{ + return wakeupgen_base; +} + +int omap_secure_apis_support(void) +{ + return omap_secure_apis; +} + /* * Initialise the wakeupgen module. */ @@ -358,12 +416,18 @@ int __init omap_wakeupgen_init(void) } /* Static mapping, never released */ - wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K); if (WARN_ON(!wakeupgen_base)) return -ENOMEM; + if (cpu_is_omap44xx()) { + irq_banks = OMAP4_NR_BANKS; + max_irqs = OMAP4_NR_IRQS; + omap_secure_apis = 1; + } + /* Clear all IRQ bitmasks at wakeupGen level */ - for (i = 0; i < NR_REG_BANKS; i++) { + for (i = 0; i < irq_banks; i++) { wakeupgen_writel(0, i, CPU0_ID); wakeupgen_writel(0, i, CPU1_ID); } @@ -382,7 +446,7 @@ int __init omap_wakeupgen_init(void) */ /* Associate all the IRQs to boot CPU like GIC init does. */ - for (i = 0; i < NR_IRQS; i++) + for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; irq_hotplug_init(); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index a8161e5f320..c29dee998a7 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -21,6 +21,8 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <plat/irqs.h> #include <plat/sram.h> @@ -210,6 +212,18 @@ static int __init omap4_sar_ram_init(void) } early_initcall(omap4_sar_ram_init); +static struct of_device_id irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, + { } +}; + +void __init omap_gic_of_init(void) +{ + omap_wakeupgen_init(); + of_irq_init(irq_match); +} + #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) static int omap4_twl6030_hsmmc_late_init(struct device *dev) { diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index fe5b545ad44..e170fe803b0 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -12,7 +12,7 @@ #define OMAP_ARCH_OMAP4_SAR_LAYOUT_H /* - * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE + * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE */ #define SAR_BANK1_OFFSET 0x0000 #define SAR_BANK2_OFFSET 0x1000 @@ -47,4 +47,14 @@ #define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0) #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 +/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) + #endif diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 773193670ea..6ca8e519968 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -153,6 +153,7 @@ #include "prm44xx.h" #include "prminst44xx.h" #include "mux.h" +#include "pm.h" /* Maximum microseconds to wait for OMAP module to softreset */ #define MAX_MODULE_SOFTRESET_WAIT 10000 @@ -166,12 +167,40 @@ */ #define LINKS_PER_OCP_IF 2 +/** + * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations + * @enable_module: function to enable a module (via MODULEMODE) + * @disable_module: function to disable a module (via MODULEMODE) + * + * XXX Eventually this functionality will be hidden inside the PRM/CM + * device drivers. Until then, this should avoid huge blocks of cpu_is_*() + * conditionals in this code. + */ +struct omap_hwmod_soc_ops { + void (*enable_module)(struct omap_hwmod *oh); + int (*disable_module)(struct omap_hwmod *oh); + int (*wait_target_ready)(struct omap_hwmod *oh); + int (*assert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*deassert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*is_hardreset_asserted)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*init_clkdm)(struct omap_hwmod *oh); +}; + +/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ +static struct omap_hwmod_soc_ops soc_ops; + /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; +/* io_chain_lock: used to serialize reconfigurations of the I/O chain */ +static DEFINE_SPINLOCK(io_chain_lock); + /* * linkspace: ptr to a buffer that struct omap_hwmod_link records are * allocated from - used to reduce the number of small memory @@ -186,6 +215,9 @@ static struct omap_hwmod_link *linkspace; */ static unsigned short free_ls, max_ls, ls_supp; +/* inited: set to true once the hwmod code is initialized */ +static bool inited; + /* Private functions */ /** @@ -388,6 +420,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v + * @oh: struct omap_hwmod * + * + * The DMADISABLE bit is a semi-automatic bit present in sysconfig register + * of some modules. When the DMA must perform read/write accesses, the + * DMADISABLE bit is cleared by the hardware. But when the DMA must stop + * for power management, software must set the DMADISABLE bit back to 1. + * + * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_dmadisable(struct omap_hwmod *oh) +{ + u32 v; + u32 dmadisable_mask; + + if (!oh->class->sysc || + !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE)) + return -EINVAL; + + if (!oh->class->sysc->sysc_fields) { + WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); + return -EINVAL; + } + + /* clocks must be on for this operation */ + if (oh->_state != _HWMOD_STATE_ENABLED) { + pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name); + + v = oh->_sysc_cache; + dmadisable_mask = + (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift); + v |= dmadisable_mask; + _write_sysconfig(v, oh); + + return 0; +} + +/** * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v * @oh: struct omap_hwmod * * @autoidle: desired AUTOIDLE bitfield value (0 or 1) @@ -771,23 +846,19 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) } /** - * _enable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Enables the PRCM module mode related to the hwmod @oh. * No return value. */ -static void _enable_module(struct omap_hwmod *oh) +static void _omap4_enable_module(struct omap_hwmod *oh) { - /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return; - pr_debug("omap_hwmod: %s: _enable_module: %d\n", - oh->name, oh->prcm.omap4.modulemode); + pr_debug("omap_hwmod: %s: %s: %d\n", + oh->name, __func__, oh->prcm.omap4.modulemode); omap4_cminst_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->prcm_partition, @@ -807,10 +878,7 @@ static void _enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!cpu_is_omap44xx()) - return 0; - - if (!oh) + if (!oh || !oh->clkdm) return -EINVAL; if (oh->_int_flags & _HWMOD_NO_MPU_PORT) @@ -1124,15 +1192,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1141,8 +1212,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1208,8 +1287,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1285,24 +1369,20 @@ static struct omap_hwmod *_lookup(const char *name) return oh; } + /** * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod * @oh: struct omap_hwmod * * * Convert a clockdomain name stored in a struct omap_hwmod into a * clockdomain pointer, and save it into the struct omap_hwmod. - * return -EINVAL if clkdm_name does not exist or if the lookup failed. + * Return -EINVAL if the clkdm_name lookup failed. */ static int _init_clkdm(struct omap_hwmod *oh) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) + if (!oh->clkdm_name) return 0; - if (!oh->clkdm_name) { - pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name); - return -EINVAL; - } - oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", @@ -1338,7 +1418,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) ret |= _init_main_clk(oh); ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); - ret |= _init_clkdm(oh); + if (soc_ops.init_clkdm) + ret |= soc_ops.init_clkdm(oh); if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; @@ -1349,53 +1430,6 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) } /** - * _wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _wait_target_ready(struct omap_hwmod *oh) -{ - struct omap_hwmod_ocp_if *os; - int ret; - - if (!oh) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - os = _find_mpu_rt_port(oh); - if (!os) - return 0; - - /* XXX check module SIDLEMODE */ - - /* XXX check clock enable states */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); - } else if (cpu_is_omap44xx()) { - if (!oh->clkdm) - return -EINVAL; - - ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - } else { - BUG(); - }; - - return ret; -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1431,32 +1465,31 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, * @oh: struct omap_hwmod * * @name: name of the reset line to lookup and assert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * asserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * assert_hardreset code. */ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.assert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift); - else if (cpu_is_omap44xx()) - return omap4_prminst_assert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - else - return -EINVAL; + ret = soc_ops.assert_hardreset(oh, &ohri); + + return ret; } /** @@ -1465,38 +1498,29 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and deassert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * deasserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * deassert_hardreset code. */ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - int ret; + int ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.deassert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - if (ohri.st_shift) - pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", - oh->name, name); - ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } - + ret = soc_ops.deassert_hardreset(oh, &ohri); if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); @@ -1509,31 +1533,28 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and read * - * Return the state of the reset line. + * Return the state of the reset line. Returns -EINVAL if @oh is + * null, -ENOSYS if we have no way of reading the hardreset line + * status on the currently-booted SoC, or passes along the return + * value from _lookup_hardreset() or the SoC's is_hardreset_asserted + * code. */ static int _read_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.is_hardreset_asserted) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } + return soc_ops.is_hardreset_asserted(oh, &ohri); } /** @@ -1571,10 +1592,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) { int v; - /* The module mode does not exist prior OMAP4 */ - if (!cpu_is_omap44xx()) - return -EINVAL; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; @@ -1698,11 +1715,17 @@ dis_opt_clks: * therefore have no OCP header registers to access. Others (like the * IVA) have idiosyncratic reset sequences. So for these relatively * rare cases, custom reset code can be supplied in the struct - * omap_hwmod_class .reset function pointer. Passes along the return - * value from either _ocp_softreset() or the custom reset function - - * these must return -EINVAL if the hwmod cannot be reset this way or - * if the hwmod is in the wrong state, -ETIMEDOUT if the module did - * not reset in time, or 0 upon success. + * omap_hwmod_class .reset function pointer. + * + * _set_dmadisable() is called to set the DMADISABLE bit so that it + * does not prevent idling of the system. This is necessary for cases + * where ROMCODE/BOOTLOADER uses dma and transfers control to the + * kernel without disabling dma. + * + * Passes along the return value from either _ocp_softreset() or the + * custom reset function - these must return -EINVAL if the hwmod + * cannot be reset this way or if the hwmod is in the wrong state, + * -ETIMEDOUT if the module did not reset in time, or 0 upon success. */ static int _reset(struct omap_hwmod *oh) { @@ -1724,6 +1747,8 @@ static int _reset(struct omap_hwmod *oh) } } + _set_dmadisable(oh); + /* * OCP_SYSCONFIG bits need to be reprogrammed after a * softreset. The _enable() function should be split to avoid @@ -1738,6 +1763,32 @@ static int _reset(struct omap_hwmod *oh) } /** + * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain + * + * Call the appropriate PRM function to clear any logged I/O chain + * wakeups and to reconfigure the chain. This apparently needs to be + * done upon every mux change. Since hwmods can be concurrently + * enabled and idled, hold a spinlock around the I/O chain + * reconfiguration sequence. No return value. + * + * XXX When the PRM code is moved to drivers, this function can be removed, + * as the PRM infrastructure should abstract this. + */ +static void _reconfigure_io_chain(void) +{ + unsigned long flags; + + spin_lock_irqsave(&io_chain_lock, flags); + + if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl()) + omap3xxx_prm_reconfigure_io_chain(); + else if (cpu_is_omap44xx()) + omap44xx_prm_reconfigure_io_chain(); + + spin_unlock_irqrestore(&io_chain_lock, flags); +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -1793,8 +1844,10 @@ static int _enable(struct omap_hwmod *oh) /* Mux pins for device runtime if populated */ if (oh->mux && (!oh->mux->enabled || ((oh->_state == _HWMOD_STATE_IDLE) && - oh->mux->pads_dynamic))) + oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); + _reconfigure_io_chain(); + } _add_initiator_dep(oh, mpu_oh); @@ -1814,9 +1867,11 @@ static int _enable(struct omap_hwmod *oh) } _enable_clocks(oh); - _enable_module(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); - r = _wait_target_ready(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : + -EINVAL; if (!r) { /* * Set the clockdomain to HW_AUTO only if the target is ready, @@ -1870,7 +1925,8 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); /* * The module must be in idle mode before disabling any parents @@ -1883,8 +1939,10 @@ static int _idle(struct omap_hwmod *oh) clkdm_hwmod_disable(oh->clkdm, oh); /* Mux pins for device idle if populated */ - if (oh->mux && oh->mux->pads_dynamic) + if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); + _reconfigure_io_chain(); + } oh->_state = _HWMOD_STATE_IDLE; @@ -1975,7 +2033,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -2431,6 +2490,194 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) return 0; } +/* Static functions intended only for use in soc_ops field function pointers */ + +/** + * _omap2_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap4_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap4_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh || !oh->clkdm) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status */ + + return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_assert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_assert_hardreset(). XXX This function is scheduled + * for removal when the PRM code is moved into drivers/. + */ +static int _omap2_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift); +} + +/** + * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_deassert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_deassert_hardreset(). XXX This function is + * scheduled for removal when the PRM code is moved into drivers/. + */ +static int _omap2_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift, + ohri->st_shift); +} + +/** + * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_is_hardreset_asserted() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap2_prm_is_hardreset_asserted(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + ohri->st_shift); +} + +/** + * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_assert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_assert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_assert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_deassert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_deassert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + if (ohri->st_shift) + pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", + oh->name, ohri->name); + return omap4_prminst_deassert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_is_hardreset_asserted() with parameters + * extracted from the hwmod @oh and the hardreset line data @ohri. + * Only intended for use as an soc_ops function pointer. Passes along + * the return value from omap4_prminst_is_hardreset_asserted(). XXX + * This function is scheduled for removal when the PRM code is moved + * into drivers/. + */ +static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -2563,12 +2810,18 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), * * Intended to be called early in boot before the clock framework is * initialized. If @ois is not null, will register all omap_hwmods - * listed in @ois that are valid for this chip. Returns 0. + * listed in @ois that are valid for this chip. Returns -EINVAL if + * omap_hwmod_init() hasn't been called before calling this function, + * -ENOMEM if the link memory area can't be allocated, or 0 upon + * success. */ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) { int r, i; + if (!inited) + return -EINVAL; + if (!ois) return 0; @@ -3401,3 +3654,47 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) return 0; } + +/** + * omap_hwmod_init - initialize the hwmod code + * + * Sets up some function pointers needed by the hwmod code to operate on the + * currently-booted SoC. Intended to be called once during kernel init + * before any hwmods are registered. No return value. + */ +void __init omap_hwmod_init(void) +{ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap2_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.init_clkdm = _init_clkdm; + } else { + WARN(1, "omap_hwmod: unknown SoC type\n"); + } + + inited = true; +} + +/** + * omap_hwmod_get_main_clk - get pointer to main clock name + * @oh: struct omap_hwmod * + * + * Returns the main clock name assocated with @oh upon success, + * or NULL if @oh is NULL. + */ +const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh) +{ + if (!oh) + return NULL; + + return oh->main_clk; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a7640d1b215..50cfab61b0e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -192,6 +192,11 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { .name = "mcbsp", }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -214,6 +219,8 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -238,6 +245,8 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = { @@ -585,5 +594,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { int __init omap2420_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4d726498123..58b5bc196d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -296,6 +296,11 @@ static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE2, }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -320,6 +325,8 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -345,6 +352,8 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp3 */ @@ -370,6 +379,8 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp4 */ @@ -401,6 +412,8 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp5 */ @@ -432,6 +445,8 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* MMC/SD/SDIO common */ @@ -938,5 +953,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { int __init omap2430_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 83eafd96eca..afad69c6ba6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -68,7 +68,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { struct omap_hwmod_class omap2xxx_timer_hwmod_class = { .name = "timer", .sysc = &omap2xxx_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; /* @@ -257,7 +256,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -276,7 +274,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -295,7 +292,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -314,7 +310,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -333,7 +328,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -352,7 +346,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -371,7 +364,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b26d3c9bca1..c9e38200216 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,6 +14,8 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ +#include <linux/power/smartreflex.h> + #include <plat/omap_hwmod.h> #include <mach/irqs.h> #include <plat/cpu.h> @@ -29,8 +31,6 @@ #include <plat/dmtimer.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" @@ -129,7 +129,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { .name = "timer", .sysc = &omap3xxx_timer_1ms_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { @@ -145,12 +144,11 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { .name = "timer", .sysc = &omap3xxx_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, }; /* secure timers dev attribute */ static struct omap_timer_capability_dev_attr capability_secure_dev_attr = { - .timer_capability = OMAP_TIMER_SECURE, + .timer_capability = OMAP_TIMER_ALWON | OMAP_TIMER_SECURE, }; /* always-on timers dev attribute */ @@ -195,7 +193,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_1ms_hwmod_class, }; @@ -213,7 +210,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -231,7 +227,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -249,7 +244,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -267,7 +261,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -285,7 +278,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -527,11 +519,27 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { { .irq = INT_35XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, + { .dma_req = -1 } +}; + +/* + * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or + * uart2_fck being enabled. So we add uart1_fck as an optional clock, + * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really + * should not be needed. The functional clock structure of the AM35xx + * UART4 is extremely unclear and opaque; it is unclear what the role + * of uart1/2_fck is for the UART4. Any clarification from either + * empirical testing or the AM3505/3517 hardware designers would be + * most welcome. + */ +static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { + { .role = "softreset_uart1_fck", .clk = "uart1_fck" }, }; static struct omap_hwmod am35xx_uart4_hwmod = { @@ -543,11 +551,14 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART4_SHIFT, + .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, }, + .opt_clks = am35xx_uart4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks), + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_uart_class, }; @@ -1074,6 +1085,17 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE3, }; +/* McBSP functional clock mapping */ +static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "core_96m_fck" }, +}; + +static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "per_96m_fck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .name = "common", .irq = 16 }, @@ -1097,6 +1119,8 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* mcbsp2 */ @@ -1126,6 +1150,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp2_dev_attr, }; @@ -1156,6 +1182,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp3_dev_attr, }; @@ -1188,6 +1216,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), }; /* mcbsp5 */ @@ -1219,6 +1249,8 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* 'mcbsp sidetone' class */ @@ -1325,7 +1357,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { }; static struct omap_hwmod omap34xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1343,7 +1375,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }; static struct omap_hwmod omap36xx_sr1_hwmod = { - .name = "sr1", + .name = "smartreflex_mpu_iva", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -1370,7 +1402,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { }; static struct omap_hwmod omap34xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -1388,7 +1420,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }; static struct omap_hwmod omap36xx_sr2_hwmod = { - .name = "sr2", + .name = "smartreflex_core", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -1638,25 +1670,20 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", - .sysc = NULL, }; static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .main_clk = NULL, - .prcm = { - .omap2 = { - }, - }, + .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, + .flags = HWMOD_NO_IDLEST, }; /* MMC/SD/SDIO common */ @@ -2097,9 +2124,10 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .master = &am35xx_usbhsotg_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", + .clk = "hsotgusb_ick", .user = OCP_USER_MPU, }; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -2243,6 +2271,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { @@ -2393,7 +2422,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", + .clk = "hsotgusb_ick", .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -3138,6 +3167,107 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* am35xx has Davinci MDIO & EMAC */ +static struct omap_hwmod_class am35xx_mdio_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am35xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am35xx_mdio_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { + .master = &am35xx_mdio_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_fck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { + { + .pa_start = AM35XX_IPSS_MDIO_BASE, + .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci mdio */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_mdio_hwmod, + .clk = "emac_fck", + .addr = am35xx_mdio_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { + { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, + { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, + { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, + { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, + { .irq = -1 } +}; + +static struct omap_hwmod_class am35xx_emac_class = { + .name = "davinci_emac", +}; + +static struct omap_hwmod am35xx_emac_hwmod = { + .name = "davinci_emac", + .mpu_irqs = am35xx_emac_mpu_irqs, + .class = &am35xx_emac_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* l3_core -> davinci emac interface */ +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_emac__l3 = { + .master = &am35xx_emac_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { + { + .pa_start = AM35XX_IPSS_EMAC_BASE, + .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci emac */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_emac_hwmod, + .clk = "emac_ick", + .addr = am35xx_emac_addrs, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3266,6 +3396,10 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &am35xx_mdio__l3, + &am35xx_l4_core__mdio, + &am35xx_emac__l3, + &am35xx_l4_core__emac, NULL }; @@ -3283,6 +3417,8 @@ int __init omap3xxx_hwmod_init(void) struct omap_hwmod_ocp_if **h = NULL; unsigned int rev; + omap_hwmod_init(); + /* Register hwmod links common to all OMAP3 */ r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs); if (r < 0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b7bcba5221b..242aee498ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -19,6 +19,7 @@ */ #include <linux/io.h> +#include <linux/power/smartreflex.h> #include <plat/omap_hwmod.h> #include <plat/cpu.h> @@ -32,8 +33,6 @@ #include <plat/common.h> #include "omap_hwmod_common_data.h" - -#include "smartreflex.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" @@ -2544,14 +2543,12 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* cm_core */ static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* prm */ @@ -2568,7 +2565,6 @@ static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { static struct omap_hwmod omap44xx_prm_hwmod = { .name = "prm", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "prm_clkdm", .mpu_irqs = omap44xx_prm_irqs, .rst_lines = omap44xx_prm_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), @@ -2947,7 +2943,6 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer3 */ @@ -2969,7 +2964,6 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer4 */ @@ -2991,7 +2985,6 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer5 */ @@ -3013,7 +3006,6 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer6 */ @@ -3036,7 +3028,6 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer7 */ @@ -3058,7 +3049,6 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_alwon_dev_attr, }; /* timer8 */ @@ -6148,6 +6138,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { int __init omap44xx_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 51e5418899f..9f1ccdc8cc8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -47,6 +47,16 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT, .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, + .dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT, +}; + +/** + * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme. + * Used by some IPs on AM33xx + */ +struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = { + .midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT, + .sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT, }; struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h index 90b50984cd2..a6ce34dc481 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.h +++ b/arch/arm/mach-omap2/omap_l3_noc.h @@ -51,7 +51,9 @@ static u32 l3_targ_inst_clk1[] = { 0x200, /* DMM2 */ 0x300, /* ABE */ 0x400, /* L4CFG */ - 0x600 /* CLK2 PWR DISC */ + 0x600, /* CLK2 PWR DISC */ + 0x0, /* Host CLK1 */ + 0x900 /* L4 Wakeup */ }; static u32 l3_targ_inst_clk2[] = { @@ -72,11 +74,16 @@ static u32 l3_targ_inst_clk2[] = { 0xE00, /* missing in TRM corresponds to AES2*/ 0xC00, /* L4 PER3 */ 0xA00, /* L4 PER1*/ - 0xB00 /* L4 PER2*/ + 0xB00, /* L4 PER2*/ + 0x0, /* HOST CLK2 */ + 0x1800, /* CAL */ + 0x1700 /* LLI */ }; static u32 l3_targ_inst_clk3[] = { - 0x0100 /* EMUSS */ + 0x0100 /* EMUSS */, + 0x0300, /* DEBUGSS_CT_TBR */ + 0x0 /* HOST CLK3 */ }; static struct l3_masters_data { @@ -110,13 +117,15 @@ static struct l3_masters_data { { 0xC8, "USBHOSTFS"} }; -static char *l3_targ_inst_name[L3_MODULES][18] = { +static char *l3_targ_inst_name[L3_MODULES][21] = { { "DMM1", "DMM2", "ABE", "L4CFG", "CLK2 PWR DISC", + "HOST CLK1", + "L4 WAKEUP" }, { "CORTEX M3" , @@ -137,9 +146,14 @@ static char *l3_targ_inst_name[L3_MODULES][18] = { "L4 PER3", "L4 PER1", "L4 PER2", + "HOST CLK2", + "CAL", + "LLI" }, { "EMUSS", + "DEBUG SOURCE", + "HOST CLK3" }, }; diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index de6d4645174..d8f6dbf45d1 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -53,7 +53,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, omap_table_init = 1; /* Lets now register with OPP library */ - for (i = 0; i < opp_def_size; i++) { + for (i = 0; i < opp_def_size; i++, opp_def++) { struct omap_hwmod *oh; struct device *dev; @@ -86,7 +86,6 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, opp_def->freq, opp_def->hwmod_name, i, r); } - opp_def++; } return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 78564895e91..686137d164d 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -15,12 +15,25 @@ #include "powerdomain.h" +#ifdef CONFIG_CPU_IDLE +extern int __init omap3_idle_init(void); +extern int __init omap4_idle_init(void); +#else +static inline int omap3_idle_init(void) +{ + return 0; +} + +static inline int omap4_idle_init(void) +{ + return 0; +} +#endif + extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); -extern int omap3_idle_init(void); -extern int omap4_idle_init(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); @@ -88,7 +101,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); #else diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a595e89972..e4fc88c65db 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -70,34 +70,6 @@ void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; -static struct powerdomain *cam_pwrdm; - -static void omap3_enable_io_chain(void) -{ - int timeout = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - pr_err("Wake up daisy chain activation failed.\n"); - return; - } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKEN); - } -} - -static void omap3_disable_io_chain(void) -{ - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); -} static void omap3_core_save_context(void) { @@ -299,24 +271,22 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_enable_io_chain(); - } - pwrdm_pre_transition(); + if (mpu_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(mpu_pwrdm); + pwrdm_pre_transition(neon_pwrdm); + } /* PER */ if (per_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { + pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -369,26 +339,20 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); + pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); - pwrdm_post_transition(); - /* PER */ - if (per_next_state < PWRDM_POWER_ON) + if (per_next_state < PWRDM_POWER_ON) { omap2_gpio_resume_after_idle(); - - /* Disable IO-PAD and IO-CHAIN wakeup */ - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_disable_io_chain(); + pwrdm_post_transition(per_pwrdm); } - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); + if (mpu_next_state < PWRDM_POWER_ON) { + pwrdm_post_transition(mpu_pwrdm); + pwrdm_post_transition(neon_pwrdm); + } } static void omap3_pm_idle(void) @@ -581,10 +545,13 @@ static void __init prcm_setup_regs(void) OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ - omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + if (omap3_has_iva()) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } /* Clear any pending 'reset' flags */ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); @@ -598,7 +565,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - omap3_iva_idle(); + if (omap3_has_iva()) + omap3_iva_idle(); + omap3_d2d_idle(); } @@ -749,7 +718,6 @@ int __init omap3_pm_init(void) neon_pwrdm = pwrdm_lookup("neon_pwrdm"); per_pwrdm = pwrdm_lookup("per_pwrdm"); core_pwrdm = pwrdm_lookup("core_pwrdm"); - cam_pwrdm = pwrdm_lookup("cam_pwrdm"); neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 96114901b93..69b36e185e9 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm) * * Return the powerdomain @pwrdm's current power state. Returns -EINVAL * if the powerdomain pointer is null or returns the current power state - * upon success. + * upon success. Note that if the power domain only supports the ON state + * then just return ON as the current state. */ int pwrdm_read_pwrst(struct powerdomain *pwrdm) { @@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm) if (!pwrdm) return -EINVAL; + if (pwrdm->pwrsts == PWRSTS_ON) + return PWRDM_POWER_ON; + if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst) ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm); @@ -981,15 +985,23 @@ int pwrdm_state_switch(struct powerdomain *pwrdm) return ret; } -int pwrdm_pre_transition(void) +int pwrdm_pre_transition(struct powerdomain *pwrdm) { - pwrdm_for_each(_pwrdm_pre_transition_cb, NULL); + if (pwrdm) + _pwrdm_pre_transition_cb(pwrdm, NULL); + else + pwrdm_for_each(_pwrdm_pre_transition_cb, NULL); + return 0; } -int pwrdm_post_transition(void) +int pwrdm_post_transition(struct powerdomain *pwrdm) { - pwrdm_for_each(_pwrdm_post_transition_cb, NULL); + if (pwrdm) + _pwrdm_post_transition_cb(pwrdm, NULL); + else + pwrdm_for_each(_pwrdm_post_transition_cb, NULL); + return 0; } diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 8f88d65c46e..baee90608d1 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -67,9 +67,9 @@ /* * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain on OMAP4 is the worst case + * PER powerdomain on AM33XX is the worst case */ -#define PWRDM_MAX_CLKDMS 9 +#define PWRDM_MAX_CLKDMS 11 /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 @@ -92,6 +92,15 @@ struct powerdomain; * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains * @voltdm_node: list_head linking all powerdomains in a voltagedomain + * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs + * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs + * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield + * in @pwrstctrl_offs + * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs + * @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs + * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs + * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield + * in @pwrstctrl_offs * @state: * @state_counter: * @timer: @@ -121,6 +130,14 @@ struct powerdomain { unsigned ret_logic_off_counter; unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS]; + const u8 pwrstctrl_offs; + const u8 pwrstst_offs; + const u32 logicretstate_mask; + const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS]; + const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS]; + #ifdef CONFIG_PM_DEBUG s64 timer; s64 state_timer[PWRDM_MAX_PWRSTS]; @@ -213,8 +230,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); int pwrdm_wait_transition(struct powerdomain *pwrdm); int pwrdm_state_switch(struct powerdomain *pwrdm); -int pwrdm_pre_transition(void); -int pwrdm_post_transition(void); +int pwrdm_pre_transition(struct powerdomain *pwrdm); +int pwrdm_post_transition(struct powerdomain *pwrdm); int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); @@ -222,10 +239,12 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); extern void omap242x_powerdomains_init(void); extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); +extern void am33xx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); extern struct pwrdm_ops omap2_pwrdm_operations; extern struct pwrdm_ops omap3_pwrdm_operations; +extern struct pwrdm_ops am33xx_pwrdm_operations; extern struct pwrdm_ops omap4_pwrdm_operations; /* Common Internal functions used across OMAP rev's */ diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c new file mode 100644 index 00000000000..67c5663899b --- /dev/null +++ b/arch/arm/mach-omap2/powerdomain33xx.c @@ -0,0 +1,229 @@ +/* + * AM33XX Powerdomain control + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak + * <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <plat/prcm.h> + +#include "powerdomain.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + + +static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LASTPOWERSTATEENTERED_MASK; + v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, + (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, + AM33XX_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_offs, pwrdm->pwrstst_offs); + return 0; +} + +static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LOGICSTATEST_MASK; + v >>= AM33XX_LOGICSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + u32 v, m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_on_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_ret_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_pwrst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_retst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) + & OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +struct pwrdm_ops am33xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, + .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, + .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, + .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, + .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, +}; diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c new file mode 100644 index 00000000000..869adb82569 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains33xx_data.c @@ -0,0 +1,185 @@ +/* + * AM33XX Power domain data + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "powerdomain.h" +#include "prcm-common.h" +#include "prm-regbits-33xx.h" +#include "prm33xx.h" + +static struct powerdomain gfx_33xx_pwrdm = { + .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_GFX_MOD, + .pwrstctrl_offs = AM33XX_PM_GFX_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_GFX_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 1, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_GFX_MEM_ONSTATE_MASK, /* gfx_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_GFX_MEM_STATEST_MASK, /* gfx_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_GFX_MEM_RETSTATE_MASK, /* gfx_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* gfx_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* gfx_mem */ + }, +}; + +static struct powerdomain rtc_33xx_pwrdm = { + .name = "rtc_pwrdm", + .voltdm = { .name = "rtc" }, + .prcm_offs = AM33XX_PRM_RTC_MOD, + .pwrstctrl_offs = AM33XX_PM_RTC_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_RTC_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, +}; + +static struct powerdomain wkup_33xx_pwrdm = { + .name = "wkup_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_WKUP_MOD, + .pwrstctrl_offs = AM33XX_PM_WKUP_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_WKUP_PWRSTST_OFFSET, + .pwrsts = PWRSTS_ON, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, +}; + +static struct powerdomain per_33xx_pwrdm = { + .name = "per_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_PER_MOD, + .pwrstctrl_offs = AM33XX_PM_PER_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_PER_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_3_3_MASK, + .mem_on_mask = { + [0] = AM33XX_PRUSS_MEM_ONSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_ONSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_ONSTATE_MASK, /* ram_mem */ + }, + .mem_ret_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_PRUSS_MEM_STATEST_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_STATEST_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_STATEST_MASK, /* ram_mem */ + }, + .mem_retst_mask = { + [0] = AM33XX_PRUSS_MEM_RETSTATE_MASK, /* pruss_mem */ + [1] = AM33XX_PER_MEM_RETSTATE_MASK, /* per_mem */ + [2] = AM33XX_RAM_MEM_RETSTATE_MASK, /* ram_mem */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* pruss_mem */ + [1] = PWRSTS_OFF_RET, /* per_mem */ + [2] = PWRSTS_OFF_RET, /* ram_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* pruss_mem */ + [1] = PWRSTS_ON, /* per_mem */ + [2] = PWRSTS_ON, /* ram_mem */ + }, +}; + +static struct powerdomain mpu_33xx_pwrdm = { + .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = AM33XX_PRM_MPU_MOD, + .pwrstctrl_offs = AM33XX_PM_MPU_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_MPU_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .banks = 3, + .logicretstate_mask = AM33XX_LOGICRETSTATE_MASK, + .mem_on_mask = { + [0] = AM33XX_MPU_L1_ONSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_ONSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_ONSTATE_MASK, /* mpu_ram */ + }, + .mem_ret_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .mem_pwrst_mask = { + [0] = AM33XX_MPU_L1_STATEST_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_STATEST_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_STATEST_MASK, /* mpu_ram */ + }, + .mem_retst_mask = { + [0] = AM33XX_MPU_L1_RETSTATE_MASK, /* mpu_l1 */ + [1] = AM33XX_MPU_L2_RETSTATE_MASK, /* mpu_l2 */ + [2] = AM33XX_MPU_RAM_RETSTATE_MASK, /* mpu_ram */ + }, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* mpu_l1 */ + [1] = PWRSTS_OFF_RET, /* mpu_l2 */ + [2] = PWRSTS_OFF_RET, /* mpu_ram */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* mpu_l1 */ + [1] = PWRSTS_ON, /* mpu_l2 */ + [2] = PWRSTS_ON, /* mpu_ram */ + }, +}; + +static struct powerdomain cefuse_33xx_pwrdm = { + .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM33XX_PRM_CEFUSE_MOD, + .pwrstctrl_offs = AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET, + .pwrstst_offs = AM33XX_PM_CEFUSE_PWRSTST_OFFSET, + .pwrsts = PWRSTS_OFF_ON, +}; + +static struct powerdomain *powerdomains_am33xx[] __initdata = { + &gfx_33xx_pwrdm, + &rtc_33xx_pwrdm, + &wkup_33xx_pwrdm, + &per_33xx_pwrdm, + &mpu_33xx_pwrdm, + &cefuse_33xx_pwrdm, + NULL, +}; + +void __init am33xx_powerdomains_init(void) +{ + pwrdm_register_platform_funcs(&am33xx_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_am33xx); + pwrdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index fb0a0a6869d..bb883e46307 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -71,6 +71,22 @@ static struct powerdomain mpu_3xxx_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain mpu_am35x_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .flags = PWRDM_HAS_MPU_QUIRK, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, + }, + .voltdm = { .name = "mpu_iva" }, +}; + /* * The USBTLL Save-and-Restore mechanism is broken on * 3430s up to ES3.0 and 3630ES1.0. Hence this feature @@ -120,6 +136,23 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain core_am35x_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEM1RETSTATE */ + [1] = PWRSTS_ON, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_ON, /* MEM2ONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain dss_pwrdm = { .name = "dss_pwrdm", .prcm_offs = OMAP3430_DSS_MOD, @@ -135,6 +168,21 @@ static struct powerdomain dss_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain dss_am35x_pwrdm = { + .name = "dss_pwrdm", + .prcm_offs = OMAP3430_DSS_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + /* * Although the 34XX TRM Rev K Table 4-371 notes that retention is a * possible SGX powerstate, the SGX device itself does not support @@ -156,6 +204,21 @@ static struct powerdomain sgx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain sgx_am35x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain cam_pwrdm = { .name = "cam_pwrdm", .prcm_offs = OMAP3430_CAM_MOD, @@ -186,6 +249,21 @@ static struct powerdomain per_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain per_am35x_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_ON, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* MEMONSTATE */ + }, + .voltdm = { .name = "core" }, +}; + static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, @@ -200,6 +278,14 @@ static struct powerdomain neon_pwrdm = { .voltdm = { .name = "mpu_iva" }, }; +static struct powerdomain neon_am35x_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .pwrsts = PWRSTS_ON, + .pwrsts_logic_ret = PWRSTS_ON, + .voltdm = { .name = "mpu_iva" }, +}; + static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, @@ -293,6 +379,22 @@ static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = { NULL }; +static struct powerdomain *powerdomains_am35x[] __initdata = { + &wkup_omap2_pwrdm, + &mpu_am35x_pwrdm, + &neon_am35x_pwrdm, + &core_am35x_pwrdm, + &sgx_am35x_pwrdm, + &dss_am35x_pwrdm, + &per_am35x_pwrdm, + &emu_pwrdm, + &dpll1_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, + NULL +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -301,21 +403,34 @@ void __init omap3xxx_powerdomains_init(void) return; pwrdm_register_platform_funcs(&omap3_pwrdm_operations); - pwrdm_register_pwrdms(powerdomains_omap3430_common); rev = omap_rev(); - if (rev == OMAP3430_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es1); - else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || - rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0) - pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); - else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 || - rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 || - rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) - pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); - else - WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { + pwrdm_register_pwrdms(powerdomains_am35x); + } else { + pwrdm_register_pwrdms(powerdomains_omap3430_common); + + switch (rev) { + case OMAP3430_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es1); + break; + case OMAP3430_REV_ES2_0: + case OMAP3430_REV_ES2_1: + case OMAP3430_REV_ES3_0: + case OMAP3630_REV_ES1_0: + pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); + break; + case OMAP3430_REV_ES3_1: + case OMAP3430_REV_ES3_1_2: + case OMAP3630_REV_ES1_1: + case OMAP3630_REV_ES1_2: + pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); + break; + default: + WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + } + } pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6da3ba483ad..e5f0503a68b 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -203,8 +203,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 -#define OMAP3430_EN_UART4_MASK (1 << 23) -#define OMAP3430_EN_UART4_SHIFT 23 +#define AM35XX_EN_UART4_MASK (1 << 23) +#define AM35XX_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) @@ -410,13 +410,21 @@ */ #define MAX_MODULE_HARDRESET_WAIT 10000 +/* + * Maximum time(us) it takes to output the signal WUCLKOUT of the last + * pad of the I/O ring after asserting WUCLKIN high. Tero measured + * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4 + * microseconds on OMAP4, so this timeout may be too high. + */ +#define MAX_IOPAD_LATCH_TIME 100 + # ifndef __ASSEMBLER__ extern void __iomem *prm_base; extern void __iomem *cm_base; extern void __iomem *cm2_base; extern void __iomem *prcm_mpu_base; -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) extern void omap_prm_base_init(void); extern void omap_cm_base_init(void); #else diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 480f40a5ee4..053e24ed3c4 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -35,6 +35,7 @@ #include "prm2xxx_3xxx.h" #include "prm44xx.h" #include "prminst44xx.h" +#include "cminst44xx.h" #include "prm-regbits-24xx.h" #include "prm-regbits-44xx.h" #include "control.h" @@ -159,8 +160,30 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) if (omap2_globals->prcm_mpu) prcm_mpu_base = omap2_globals->prcm_mpu; - if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx() || soc_is_omap54xx()) { omap_prm_base_init(); omap_cm_base_init(); } } + +/* + * Stubbed functions so that common files continue to build when + * custom builds are used + * XXX These are temporary and should be removed at the earliest possible + * opportunity + */ +int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h new file mode 100644 index 00000000000..0221b5c20e8 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-33xx.h @@ -0,0 +1,357 @@ +/* + * AM33XX PRM_XXX register bits + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H + +#include "prm.h" + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT 1 +#define AM33XX_ABBOFF_ACT_EXPORT_MASK (1 << 1) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT 2 +#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK (1 << 2) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_AIPOFF_SHIFT 8 +#define AM33XX_AIPOFF_MASK (1 << 8) + +/* Used by PM_WKUP_PWRSTST */ +#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT 17 +#define AM33XX_DEBUGSS_MEM_STATEST_MASK (0x3 << 17) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_DISABLE_RTA_EXPORT_SHIFT 0 +#define AM33XX_DISABLE_RTA_EXPORT_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_EN_MASK (1 << 12) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT 12 +#define AM33XX_DPLL_CORE_RECAL_ST_MASK (1 << 12) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_EN_MASK (1 << 14) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT 14 +#define AM33XX_DPLL_DDR_RECAL_ST_MASK (1 << 14) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT 15 +#define AM33XX_DPLL_DISP_RECAL_EN_MASK (1 << 15) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT 13 +#define AM33XX_DPLL_DISP_RECAL_ST_MASK (1 << 13) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_EN_MASK (1 << 11) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT 11 +#define AM33XX_DPLL_MPU_RECAL_ST_MASK (1 << 11) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_DPLL_PER_RECAL_EN_SHIFT 13 +#define AM33XX_DPLL_PER_RECAL_EN_MASK (1 << 13) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_DPLL_PER_RECAL_ST_SHIFT 15 +#define AM33XX_DPLL_PER_RECAL_ST_MASK (1 << 15) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_EMULATION_M3_RST_SHIFT 6 +#define AM33XX_EMULATION_M3_RST_MASK (1 << 6) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_EMULATION_MPU_RST_SHIFT 5 +#define AM33XX_EMULATION_MPU_RST_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC1_EXPORT_SHIFT 3 +#define AM33XX_ENFUNC1_EXPORT_MASK (1 << 3) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC3_EXPORT_SHIFT 5 +#define AM33XX_ENFUNC3_EXPORT_MASK (1 << 5) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC4_SHIFT 6 +#define AM33XX_ENFUNC4_MASK (1 << 6) + +/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */ +#define AM33XX_ENFUNC5_SHIFT 7 +#define AM33XX_ENFUNC5_MASK (1 << 7) + +/* Used by PRM_RSTST */ +#define AM33XX_EXTERNAL_WARM_RST_SHIFT 5 +#define AM33XX_EXTERNAL_WARM_RST_MASK (1 << 5) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_FORCEWKUP_EN_SHIFT 10 +#define AM33XX_FORCEWKUP_EN_MASK (1 << 10) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_FORCEWKUP_ST_SHIFT 10 +#define AM33XX_FORCEWKUP_ST_MASK (1 << 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_ONSTATE_SHIFT 17 +#define AM33XX_GFX_MEM_ONSTATE_MASK (0x3 << 17) + +/* Used by PM_GFX_PWRSTCTRL */ +#define AM33XX_GFX_MEM_RETSTATE_SHIFT 6 +#define AM33XX_GFX_MEM_RETSTATE_MASK (1 << 6) + +/* Used by PM_GFX_PWRSTST */ +#define AM33XX_GFX_MEM_STATEST_SHIFT 4 +#define AM33XX_GFX_MEM_STATEST_MASK (0x3 << 4) + +/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */ +#define AM33XX_GFX_RST_SHIFT 0 +#define AM33XX_GFX_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_COLD_RST_SHIFT 0 +#define AM33XX_GLOBAL_COLD_RST_MASK (1 << 0) + +/* Used by PRM_RSTST */ +#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT 1 +#define AM33XX_GLOBAL_WARM_SW_RST_MASK (1 << 1) + +/* Used by RM_WKUP_RSTST */ +#define AM33XX_ICECRUSHER_M3_RST_SHIFT 7 +#define AM33XX_ICECRUSHER_M3_RST_MASK (1 << 7) + +/* Used by RM_MPU_RSTST */ +#define AM33XX_ICECRUSHER_MPU_RST_SHIFT 6 +#define AM33XX_ICECRUSHER_MPU_RST_MASK (1 << 6) + +/* Used by PRM_RSTST */ +#define AM33XX_ICEPICK_RST_SHIFT 9 +#define AM33XX_ICEPICK_RST_MASK (1 << 9) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PRUSS_LRST_SHIFT 1 +#define AM33XX_PRUSS_LRST_MASK (1 << 1) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT 5 +#define AM33XX_PRUSS_MEM_ONSTATE_MASK (0x3 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT 7 +#define AM33XX_PRUSS_MEM_RETSTATE_MASK (1 << 7) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PRUSS_MEM_STATEST_SHIFT 23 +#define AM33XX_PRUSS_MEM_STATEST_MASK (0x3 << 23) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_INTRANSITION_SHIFT 20 +#define AM33XX_INTRANSITION_MASK (1 << 20) + +/* Used by PM_CEFUSE_PWRSTST */ +#define AM33XX_LASTPOWERSTATEENTERED_SHIFT 24 +#define AM33XX_LASTPOWERSTATEENTERED_MASK (0x3 << 24) + +/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_SHIFT 2 +#define AM33XX_LOGICRETSTATE_MASK (1 << 2) + +/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */ +#define AM33XX_LOGICRETSTATE_3_3_SHIFT 3 +#define AM33XX_LOGICRETSTATE_3_3_MASK (1 << 3) + +/* + * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST, + * PM_WKUP_PWRSTST, PM_RTC_PWRSTST + */ +#define AM33XX_LOGICSTATEST_SHIFT 2 +#define AM33XX_LOGICSTATEST_MASK (1 << 2) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL + */ +#define AM33XX_LOWPOWERSTATECHANGE_SHIFT 4 +#define AM33XX_LOWPOWERSTATECHANGE_MASK (1 << 4) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_ONSTATE_SHIFT 18 +#define AM33XX_MPU_L1_ONSTATE_MASK (0x3 << 18) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L1_RETSTATE_SHIFT 22 +#define AM33XX_MPU_L1_RETSTATE_MASK (1 << 22) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L1_STATEST_SHIFT 6 +#define AM33XX_MPU_L1_STATEST_MASK (0x3 << 6) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_ONSTATE_SHIFT 20 +#define AM33XX_MPU_L2_ONSTATE_MASK (0x3 << 20) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_L2_RETSTATE_SHIFT 23 +#define AM33XX_MPU_L2_RETSTATE_MASK (1 << 23) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_L2_STATEST_SHIFT 8 +#define AM33XX_MPU_L2_STATEST_MASK (0x3 << 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_ONSTATE_SHIFT 16 +#define AM33XX_MPU_RAM_ONSTATE_MASK (0x3 << 16) + +/* Used by PM_MPU_PWRSTCTRL */ +#define AM33XX_MPU_RAM_RETSTATE_SHIFT 24 +#define AM33XX_MPU_RAM_RETSTATE_MASK (1 << 24) + +/* Used by PM_MPU_PWRSTST */ +#define AM33XX_MPU_RAM_STATEST_SHIFT 4 +#define AM33XX_MPU_RAM_STATEST_MASK (0x3 << 4) + +/* Used by PRM_RSTST */ +#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT 2 +#define AM33XX_MPU_SECURITY_VIOL_RST_MASK (1 << 2) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_PCHARGECNT_VALUE_SHIFT 0 +#define AM33XX_PCHARGECNT_VALUE_MASK (0x3f << 0) + +/* Used by RM_PER_RSTCTRL */ +#define AM33XX_PCI_LRST_SHIFT 0 +#define AM33XX_PCI_LRST_MASK (1 << 0) + +/* Renamed from PCI_LRST Used by RM_PER_RSTST */ +#define AM33XX_PCI_LRST_5_5_SHIFT 5 +#define AM33XX_PCI_LRST_5_5_MASK (1 << 5) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_ONSTATE_SHIFT 25 +#define AM33XX_PER_MEM_ONSTATE_MASK (0x3 << 25) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_PER_MEM_RETSTATE_SHIFT 29 +#define AM33XX_PER_MEM_RETSTATE_MASK (1 << 29) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_PER_MEM_STATEST_SHIFT 17 +#define AM33XX_PER_MEM_STATEST_MASK (0x3 << 17) + +/* + * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL + */ +#define AM33XX_POWERSTATE_SHIFT 0 +#define AM33XX_POWERSTATE_MASK (0x3 << 0) + +/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */ +#define AM33XX_POWERSTATEST_SHIFT 0 +#define AM33XX_POWERSTATEST_MASK (0x3 << 0) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_ONSTATE_SHIFT 30 +#define AM33XX_RAM_MEM_ONSTATE_MASK (0x3 << 30) + +/* Used by PM_PER_PWRSTCTRL */ +#define AM33XX_RAM_MEM_RETSTATE_SHIFT 27 +#define AM33XX_RAM_MEM_RETSTATE_MASK (1 << 27) + +/* Used by PM_PER_PWRSTST */ +#define AM33XX_RAM_MEM_STATEST_SHIFT 21 +#define AM33XX_RAM_MEM_STATEST_MASK (0x3 << 21) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_RETMODE_ENABLE_SHIFT 0 +#define AM33XX_RETMODE_ENABLE_MASK (1 << 0) + +/* Used by REVISION_PRM */ +#define AM33XX_REV_SHIFT 0 +#define AM33XX_REV_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME1_SHIFT 0 +#define AM33XX_RSTTIME1_MASK (0xff << 0) + +/* Used by PRM_RSTTIME */ +#define AM33XX_RSTTIME2_SHIFT 8 +#define AM33XX_RSTTIME2_MASK (0x1f << 8) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT 1 +#define AM33XX_RST_GLOBAL_COLD_SW_MASK (1 << 1) + +/* Used by PRM_RSTCTRL */ +#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT 0 +#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_SLPCNT_VALUE_SHIFT 16 +#define AM33XX_SLPCNT_VALUE_MASK (0xff << 16) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAMLDO_STATUS_SHIFT 8 +#define AM33XX_SRAMLDO_STATUS_MASK (1 << 8) + +/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */ +#define AM33XX_SRAM_IN_TRANSITION_SHIFT 9 +#define AM33XX_SRAM_IN_TRANSITION_MASK (1 << 9) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_STARTUP_COUNT_SHIFT 24 +#define AM33XX_STARTUP_COUNT_MASK (0xff << 24) + +/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */ +#define AM33XX_TRANSITION_EN_SHIFT 8 +#define AM33XX_TRANSITION_EN_MASK (1 << 8) + +/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */ +#define AM33XX_TRANSITION_ST_SHIFT 8 +#define AM33XX_TRANSITION_ST_MASK (1 << 8) + +/* Used by PRM_SRAM_COUNT */ +#define AM33XX_VSETUPCNT_VALUE_SHIFT 8 +#define AM33XX_VSETUPCNT_VALUE_MASK (0xff << 8) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT0_RST_SHIFT 3 +#define AM33XX_WDT0_RST_MASK (1 << 3) + +/* Used by PRM_RSTST */ +#define AM33XX_WDT1_RST_SHIFT 4 +#define AM33XX_WDT1_RST_MASK (1 << 4) + +/* Used by RM_WKUP_RSTCTRL */ +#define AM33XX_WKUP_M3_LRST_SHIFT 3 +#define AM33XX_WKUP_M3_LRST_MASK (1 << 3) + +/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */ +#define AM33XX_WKUP_M3_LRST_5_5_SHIFT 5 +#define AM33XX_WKUP_M3_LRST_5_5_MASK (1 << 5) + +#endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 21cb74003a5..a0309dea679 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) OMAP3_PRM_IRQENABLE_MPU_OFFSET); } +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + +/** + * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O + * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux + * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. + * No return value. + */ +static void __init omap3xxx_prm_enable_io_wakeup(void) +{ + if (omap3_has_io_wakeup()) + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); +} + static int __init omap3xxx_prcm_init(void) { int ret = 0; if (cpu_is_omap34xx()) { + omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret) irq_set_status_flags(omap_prcm_event_to_irq("io"), diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 70ac2a19dc5..c19d249b481 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -228,68 +228,6 @@ #ifndef __ASSEMBLER__ -/* - * Stub omap2xxx/omap3xxx functions so that common files - * continue to build when custom builds are used - */ -#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP3)) -static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); -} -static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, - s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, - u8 st_shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function and " - "not suppose to be used on omap4\n"); - return 0; -} -#else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); @@ -315,15 +253,15 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap3xxx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); extern void omap3xxx_prm_ocp_barrier(void); extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); -#endif /* CONFIG_ARCH_OMAP4 */ - -#endif +#endif /* __ASSEMBLER */ /* * Bits common to specific registers diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c new file mode 100644 index 00000000000..e7dbb6cf125 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.c @@ -0,0 +1,135 @@ +/* + * AM33XX PRM functions + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "common.h" +#include "prm33xx.h" +#include "prm-regbits-33xx.h" + +/* Read a register in a PRM instance */ +u32 am33xx_prm_read_reg(s16 inst, u16 idx) +{ + return __raw_readl(prm_base + inst + idx); +} + +/* Write into a register in a PRM instance */ +void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) +{ + __raw_writel(val, prm_base + inst + idx); +} + +/* Read-modify-write a register in PRM. Caller must lock */ +u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, idx); + v &= ~mask; + v |= bits; + am33xx_prm_write_reg(v, inst, idx); + + return v; +} + +/** + * am33xx_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @shift: register bit shift corresponding to the reset line to check + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_offs: RM_RSTCTRL register address offset for this module + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 v; + + v = am33xx_prm_read_reg(inst, rstctrl_offs); + v &= 1 << shift; + v >>= shift; + + return v; +} + +/** + * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule + * @shift: register bit shift corresponding to the reset line to assert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) +{ + u32 mask = 1 << shift; + + am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs); + + return 0; +} + +/** + * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and + * wait + * @shift: register bit shift corresponding to the reset line to deassert + * @inst: CM instance register offset (*_INST macro) + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @rstst_reg: RM_RSTST register address for this module + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs) +{ + int c; + u32 mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs); + /* de-assert the reset control line */ + am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs); + /* wait the status to be set */ + + omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst, + rstst_offs), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h new file mode 100644 index 00000000000..3f25c563a82 --- /dev/null +++ b/arch/arm/mach-omap2/prm33xx.h @@ -0,0 +1,129 @@ +/* + * AM33XX PRM instance offset macros + * + * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM33XX_H + +#include "prcm-common.h" +#include "prm.h" + +#define AM33XX_PRM_BASE 0x44E00000 + +#define AM33XX_PRM_REGADDR(inst, reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRM_BASE + (inst) + (reg)) + + +/* PRM instances */ +#define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00 +#define AM33XX_PRM_PER_MOD 0x0C00 +#define AM33XX_PRM_WKUP_MOD 0x0D00 +#define AM33XX_PRM_MPU_MOD 0x0E00 +#define AM33XX_PRM_DEVICE_MOD 0x0F00 +#define AM33XX_PRM_RTC_MOD 0x1000 +#define AM33XX_PRM_GFX_MOD 0x1100 +#define AM33XX_PRM_CEFUSE_MOD 0x1200 + +/* PRM */ + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define AM33XX_REVISION_PRM_OFFSET 0x0000 +#define AM33XX_REVISION_PRM AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000) +#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004 +#define AM33XX_PRM_IRQSTATUS_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004) +#define AM33XX_PRM_IRQENABLE_MPU_OFFSET 0x0008 +#define AM33XX_PRM_IRQENABLE_MPU AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008) +#define AM33XX_PRM_IRQSTATUS_M3_OFFSET 0x000c +#define AM33XX_PRM_IRQSTATUS_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c) +#define AM33XX_PRM_IRQENABLE_M3_OFFSET 0x0010 +#define AM33XX_PRM_IRQENABLE_M3 AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010) + +/* PRM.PER_PRM register offsets */ +#define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) +#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 +#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) +#define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) +#define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c +#define AM33XX_PM_PER_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c) + +/* PRM.WKUP_PRM register offsets */ +#define AM33XX_RM_WKUP_RSTCTRL_OFFSET 0x0000 +#define AM33XX_RM_WKUP_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000) +#define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET 0x0004 +#define AM33XX_PM_WKUP_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004) +#define AM33XX_PM_WKUP_PWRSTST_OFFSET 0x0008 +#define AM33XX_PM_WKUP_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008) +#define AM33XX_RM_WKUP_RSTST_OFFSET 0x000c +#define AM33XX_RM_WKUP_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c) + +/* PRM.MPU_PRM register offsets */ +#define AM33XX_PM_MPU_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_MPU_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000) +#define AM33XX_PM_MPU_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_MPU_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004) +#define AM33XX_RM_MPU_RSTST_OFFSET 0x0008 +#define AM33XX_RM_MPU_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008) + +/* PRM.DEVICE_PRM register offsets */ +#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000 +#define AM33XX_PRM_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000) +#define AM33XX_PRM_RSTTIME_OFFSET 0x0004 +#define AM33XX_PRM_RSTTIME AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004) +#define AM33XX_PRM_RSTST_OFFSET 0x0008 +#define AM33XX_PRM_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008) +#define AM33XX_PRM_SRAM_COUNT_OFFSET 0x000c +#define AM33XX_PRM_SRAM_COUNT AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c) +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x0010 +#define AM33XX_PRM_LDO_SRAM_CORE_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010) +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x0014 +#define AM33XX_PRM_LDO_SRAM_CORE_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014) +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x0018 +#define AM33XX_PRM_LDO_SRAM_MPU_SETUP AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018) +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x001c +#define AM33XX_PRM_LDO_SRAM_MPU_CTRL AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c) + +/* PRM.RTC_PRM register offsets */ +#define AM33XX_PM_RTC_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_RTC_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0000) +#define AM33XX_PM_RTC_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_RTC_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_RTC_MOD, 0x0004) + +/* PRM.GFX_PRM register offsets */ +#define AM33XX_PM_GFX_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_GFX_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000) +#define AM33XX_RM_GFX_RSTCTRL_OFFSET 0x0004 +#define AM33XX_RM_GFX_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004) +#define AM33XX_PM_GFX_PWRSTST_OFFSET 0x0010 +#define AM33XX_PM_GFX_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010) +#define AM33XX_RM_GFX_RSTST_OFFSET 0x0014 +#define AM33XX_RM_GFX_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014) + +/* PRM.CEFUSE_PRM register offsets */ +#define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000 +#define AM33XX_PM_CEFUSE_PWRSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0000) +#define AM33XX_PM_CEFUSE_PWRSTST_OFFSET 0x0004 +#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) + +extern u32 am33xx_prm_read_reg(s16 inst, u16 idx); +extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx); +extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void am33xx_prm_global_warm_sw_reset(void); +extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, + u16 rstctrl_offs); +extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs); +extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, + u16 rstctrl_offs, u16 rstst_offs); +#endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index f106d21ff58..bb727c2d933 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask) OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } +/** + * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted. + * No return value. XXX Are the final two steps necessary? + */ +void omap44xx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + /* Trigger WUCLKIN enable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 1), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + /* Trigger WUCLKIN disable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 0), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line deassertion timed out\n"); + + return; +} + +/** + * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O wakeups + * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and + * omap44xx_prm_reconfigure_io_chain() must be called. No return value. + */ +static void __init omap44xx_prm_enable_io_wakeup(void) +{ + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); +} + static int __init omap4xxx_prcm_init(void) { - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { + omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + } return 0; } subsys_initcall(omap4xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7978092946d..ee72ae6bd8c 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap44xx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap44xx_prm_read_pending_irqs(unsigned long *events); extern void omap44xx_prm_ocp_barrier(void); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index dfe00ddb5c6..03b126d9ad9 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -85,7 +85,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int virtirq; - int nr_irqs = prcm_irq_setup->nr_regs * 32; + int nr_irq = prcm_irq_setup->nr_regs * 32; /* * If we are suspended, mask all interrupts from PRCM level, @@ -110,7 +110,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) prcm_irq_setup->read_pending_irqs(pending); /* No bit set, then all IRQs are handled */ - if (find_first_bit(pending, nr_irqs) >= nr_irqs) + if (find_first_bit(pending, nr_irq) >= nr_irq) break; omap_prcm_events_filter_priority(pending, priority_pending); @@ -121,11 +121,11 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) */ /* Serve priority events first */ - for_each_set_bit(virtirq, priority_pending, nr_irqs) + for_each_set_bit(virtirq, priority_pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); /* Serve normal events next */ - for_each_set_bit(virtirq, pending, nr_irqs) + for_each_set_bit(virtirq, pending, nr_irq) generic_handle_irq(prcm_irq_setup->base_irq + virtirq); } if (chip->irq_ack) @@ -319,3 +319,65 @@ err: omap_prcm_irq_cleanup(); return -ENOMEM; } + +/* + * Stubbed functions so that common files continue to build when + * custom builds are used + * XXX These are temporary and should be removed at the earliest possible + * opportunity + */ +u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); +} + +u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, + s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + +int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, + u8 st_shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + return 0; +} + diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 955566eefac..1da8f03c479 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -11,36 +11,37 @@ * published by the Free Software Foundation. */ -#include "smartreflex.h" +#include <linux/power/smartreflex.h> +#include "voltage.h" -static int sr_class3_enable(struct voltagedomain *voltdm) +static int sr_class3_enable(struct omap_sr *sr) { - unsigned long volt = voltdm_get_voltage(voltdm); + unsigned long volt = voltdm_get_voltage(sr->voltdm); if (!volt) { - pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", - __func__, voltdm->name); + pr_warning("%s: Curr voltage unknown. Cannot enable %s\n", + __func__, sr->name); return -ENODATA; } - omap_vp_enable(voltdm); - return sr_enable(voltdm, volt); + omap_vp_enable(sr->voltdm); + return sr_enable(sr->voltdm, volt); } -static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) +static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) { - sr_disable_errgen(voltdm); - omap_vp_disable(voltdm); - sr_disable(voltdm); + sr_disable_errgen(sr->voltdm); + omap_vp_disable(sr->voltdm); + sr_disable(sr->voltdm); if (is_volt_reset) - voltdm_reset(voltdm); + voltdm_reset(sr->voltdm); return 0; } -static int sr_class3_configure(struct voltagedomain *voltdm) +static int sr_class3_configure(struct omap_sr *sr) { - return sr_configure_errgen(voltdm); + return sr_configure_errgen(sr->voltdm); } /* SR class3 structure */ diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c deleted file mode 100644 index 008fbd7b935..00000000000 --- a/arch/arm/mach-omap2/smartreflex.c +++ /dev/null @@ -1,1165 +0,0 @@ -/* - * OMAP SmartReflex Voltage Control - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#include "common.h" - -#include "pm.h" -#include "smartreflex.h" - -#define SMARTREFLEX_NAME_LEN 16 -#define NVALUE_NAME_LEN 40 -#define SR_DISABLE_TIMEOUT 200 - -struct omap_sr { - struct list_head node; - struct platform_device *pdev; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; - struct dentry *dbg_dir; - unsigned int irq; - int srid; - int ip_type; - int nvalue_count; - bool autocomp_active; - u32 clk_length; - u32 err_weight; - u32 err_minlimit; - u32 err_maxlimit; - u32 accum_data; - u32 senn_avgweight; - u32 senp_avgweight; - u32 senp_mod; - u32 senn_mod; - void __iomem *base; -}; - -/* sr_list contains all the instances of smartreflex module */ -static LIST_HEAD(sr_list); - -static struct omap_sr_class_data *sr_class; -static struct omap_sr_pmic_data *sr_pmic_data; -static struct dentry *sr_dbg_dir; - -static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) -{ - __raw_writel(value, (sr->base + offset)); -} - -static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask, - u32 value) -{ - u32 reg_val; - - /* - * Smartreflex error config register is special as it contains - * certain status bits which if written a 1 into means a clear - * of those bits. So in order to make sure no accidental write of - * 1 happens to those status bits, do a clear of them in the read - * value. This mean this API doesn't rewrite values in these bits - * if they are currently set, but does allow the caller to write - * those bits. - */ - if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1) - mask |= ERRCONFIG_STATUS_V1_MASK; - else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2) - mask |= ERRCONFIG_VPBOUNDINTST_V2; - - reg_val = __raw_readl(sr->base + offset); - reg_val &= ~mask; - - value &= mask; - - reg_val |= value; - - __raw_writel(reg_val, (sr->base + offset)); -} - -static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset) -{ - return __raw_readl(sr->base + offset); -} - -static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm) -{ - struct omap_sr *sr_info; - - if (!voltdm) { - pr_err("%s: Null voltage domain passed!\n", __func__); - return ERR_PTR(-EINVAL); - } - - list_for_each_entry(sr_info, &sr_list, node) { - if (voltdm == sr_info->voltdm) - return sr_info; - } - - return ERR_PTR(-ENODATA); -} - -static irqreturn_t sr_interrupt(int irq, void *data) -{ - struct omap_sr *sr_info = data; - u32 status = 0; - - switch (sr_info->ip_type) { - case SR_TYPE_V1: - /* Read the status bits */ - status = sr_read_reg(sr_info, ERRCONFIG_V1); - - /* Clear them by writing back */ - sr_write_reg(sr_info, ERRCONFIG_V1, status); - break; - case SR_TYPE_V2: - /* Read the status bits */ - status = sr_read_reg(sr_info, IRQSTATUS); - - /* Clear them by writing back */ - sr_write_reg(sr_info, IRQSTATUS, status); - break; - default: - dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n", - sr_info->ip_type); - return IRQ_NONE; - } - - if (sr_class->notify) - sr_class->notify(sr_info->voltdm, status); - - return IRQ_HANDLED; -} - -static void sr_set_clk_length(struct omap_sr *sr) -{ - struct clk *sys_ck; - u32 sys_clk_speed; - - if (cpu_is_omap34xx()) - sys_ck = clk_get(NULL, "sys_ck"); - else - sys_ck = clk_get(NULL, "sys_clkin_ck"); - - if (IS_ERR(sys_ck)) { - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", - __func__); - return; - } - - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - - switch (sys_clk_speed) { - case 12000000: - sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK; - break; - case 13000000: - sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK; - break; - case 19200000: - sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK; - break; - case 26000000: - sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK; - break; - case 38400000: - sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK; - break; - default: - dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n", - __func__, sys_clk_speed); - break; - } -} - -static void sr_set_regfields(struct omap_sr *sr) -{ - /* - * For time being these values are defined in smartreflex.h - * and populated during init. May be they can be moved to board - * file or pmic specific data structure. In that case these structure - * fields will have to be populated using the pdata or pmic structure. - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sr->err_weight = OMAP3430_SR_ERRWEIGHT; - sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; - sr->accum_data = OMAP3430_SR_ACCUMDATA; - if (!(strcmp(sr->voltdm->name, "mpu"))) { - sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; - } else { - sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; - } - } -} - -static void sr_start_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (!sr_class->enable(sr->voltdm)) - sr->autocomp_active = true; -} - -static void sr_stop_vddautocomp(struct omap_sr *sr) -{ - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, - "%s: smartreflex class driver not registered\n", - __func__); - return; - } - - if (sr->autocomp_active) { - sr_class->disable(sr->voltdm, 1); - sr->autocomp_active = false; - } -} - -/* - * This function handles the intializations which have to be done - * only when both sr device and class driver regiter has - * completed. This will be attempted to be called from both sr class - * driver register and sr device intializtion API's. Only one call - * will ultimately succeed. - * - * Currently this function registers interrupt handler for a particular SR - * if smartreflex class driver is already registered and has - * requested for interrupts and the SR interrupt line in present. - */ -static int sr_late_init(struct omap_sr *sr_info) -{ - char *name; - struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data; - struct resource *mem; - int ret = 0; - - if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (name == NULL) { - ret = -ENOMEM; - goto error; - } - ret = request_irq(sr_info->irq, sr_interrupt, - 0, name, sr_info); - if (ret) - goto error; - disable_irq(sr_info->irq); - } - - if (pdata && pdata->enable_on_init) - sr_start_vddautocomp(sr_info); - - return ret; - -error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - list_del(&sr_info->node); - dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" - "interrupt handler. Smartreflex will" - "not function as desired\n", __func__); - kfree(name); - kfree(sr_info); - - return ret; -} - -static void sr_v1_disable(struct omap_sr *sr) -{ - int timeout = 0; - int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTST; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, - ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* Disable all other SR interrupts and clear the status as needed */ - if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1) - errconf_val |= ERRCONFIG_VPBOUNDINTST_V1; - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1), - errconf_val); - - /* - * Wait for SR to be disabled. - * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) & - ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN, - ERRCONFIG_MCUDISACKINTST); -} - -static void sr_v2_disable(struct omap_sr *sr) -{ - int timeout = 0; - - /* Enable MCUDisableAcknowledge interrupt */ - sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT); - - /* SRCONFIG - disable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0); - - /* - * Disable all other SR interrupts and clear the status - * write to status register ONLY on need basis - only if status - * is set. - */ - if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2) - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - ERRCONFIG_VPBOUNDINTST_V2); - else - sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2, - 0x0); - sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT | - IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT)); - sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT | - IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT)); - - /* - * Wait for SR to be disabled. - * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us. - */ - omap_test_timeout((sr_read_reg(sr, IRQSTATUS) & - IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT, - timeout); - - if (timeout >= SR_DISABLE_TIMEOUT) - dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n", - __func__); - - /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */ - sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT); - sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT); -} - -static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs) -{ - int i; - - if (!sr->nvalue_table) { - dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n", - __func__); - return 0; - } - - for (i = 0; i < sr->nvalue_count; i++) { - if (sr->nvalue_table[i].efuse_offs == efuse_offs) - return sr->nvalue_table[i].nvalue; - } - - return 0; -} - -/* Public Functions */ - -/** - * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the - * error generator module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the error generator module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_errgen(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_errconfig, errconfig_offs; - u32 vpboundint_en, vpboundint_st; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN; - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) | - (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) | - (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT); - sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK | - SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK), - sr_errconfig); - - /* Enabling the interrupts if the ERROR module is used */ - sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st), - vpboundint_en); - - return 0; -} - -/** - * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable the error generator module inside the smartreflex module. - * - * Returns 0 on success and error value in case of failure. - */ -int sr_disable_errgen(struct voltagedomain *voltdm) -{ - u32 errconfig_offs; - u32 vpboundint_en, vpboundint_st; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - switch (sr->ip_type) { - case SR_TYPE_V1: - errconfig_offs = ERRCONFIG_V1; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1; - break; - case SR_TYPE_V2: - errconfig_offs = ERRCONFIG_V2; - vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2; - vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - /* Disable the interrupts of ERROR module */ - sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); - - /* Disable the Sensor and errorgen */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); - - return 0; -} - -/** - * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the - * minmaxavg module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * configure the minmaxavg module inside the smartreflex module. - * SR settings if using the ERROR module inside Smartreflex. - * SR CLASS 3 by default uses only the ERROR module where as - * SR CLASS 2 can choose between ERROR module and MINMAXAVG - * module. Returns 0 on success and error value in case of failure. - */ -int sr_configure_minmax(struct voltagedomain *voltdm) -{ - u32 sr_config, sr_avgwt; - u32 senp_en = 0, senn_en = 0; - u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - if (!sr->clk_length) - sr_set_clk_length(sr); - - senp_en = sr->senp_mod; - senn_en = sr->senn_mod; - - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) | - SRCONFIG_SENENABLE | - (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT); - - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_config |= SRCONFIG_DELAYCTRL; - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT; - break; - case SR_TYPE_V2: - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT; - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT; - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift)); - sr_write_reg(sr, SRCONFIG, sr_config); - sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) | - (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT); - sr_write_reg(sr, AVGWEIGHT, sr_avgwt); - - /* - * Enabling the interrupts if MINMAXAVG module is used. - * TODO: check if all the interrupts are mandatory - */ - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_modify_reg(sr, ERRCONFIG_V1, - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN | - ERRCONFIG_MCUBOUNDINTEN), - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST | - ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST | - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST)); - break; - case SR_TYPE_V2: - sr_write_reg(sr, IRQSTATUS, - IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT | - IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT); - sr_write_reg(sr, IRQENABLE_SET, - IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT | - IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT); - break; - default: - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex" - "module without specifying the ip\n", __func__); - return -EINVAL; - } - - return 0; -} - -/** - * sr_enable() - Enables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * @volt: The voltage at which the Voltage domain associated with - * the smartreflex module is operating at. - * This is required only to program the correct Ntarget value. - * - * This API is to be called from the smartreflex class driver to - * enable a smartreflex module. Returns 0 on success. Returns error - * value if the voltage passed is wrong or if ntarget value is wrong. - */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt) -{ - struct omap_volt_data *volt_data; - struct omap_sr *sr = _sr_lookup(voltdm); - u32 nvalue_reciprocal; - int ret; - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return PTR_ERR(sr); - } - - volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); - - if (IS_ERR(volt_data)) { - dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table" - "for nominal voltage %ld\n", __func__, volt); - return PTR_ERR(volt_data); - } - - nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs); - - if (!nvalue_reciprocal) { - dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n", - __func__, volt); - return -ENODATA; - } - - /* errminlimit is opp dependent and hence linked to voltage */ - sr->err_minlimit = volt_data->sr_errminlimit; - - pm_runtime_get_sync(&sr->pdev->dev); - - /* Check if SR is already enabled. If yes do nothing */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) - return 0; - - /* Configure SR */ - ret = sr_class->configure(voltdm); - if (ret) - return ret; - - sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal); - - /* SRCONFIG - enable SR */ - sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE); - return 0; -} - -/** - * sr_disable() - Disables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the smartreflex class driver to - * disable a smartreflex module. - */ -void sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - /* Check if SR clocks are already disabled. If yes do nothing */ - if (pm_runtime_suspended(&sr->pdev->dev)) - return; - - /* - * Disable SR if only it is indeed enabled. Else just - * disable the clocks. - */ - if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) { - switch (sr->ip_type) { - case SR_TYPE_V1: - sr_v1_disable(sr); - break; - case SR_TYPE_V2: - sr_v2_disable(sr); - break; - default: - dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n", - sr->ip_type); - } - } - - pm_runtime_put_sync_suspend(&sr->pdev->dev); -} - -/** - * sr_register_class() - API to register a smartreflex class parameters. - * @class_data: The structure containing various sr class specific data. - * - * This API is to be called by the smartreflex class driver to register itself - * with the smartreflex driver during init. Returns 0 on success else the - * error value. - */ -int sr_register_class(struct omap_sr_class_data *class_data) -{ - struct omap_sr *sr_info; - - if (!class_data) { - pr_warning("%s:, Smartreflex class data passed is NULL\n", - __func__); - return -EINVAL; - } - - if (sr_class) { - pr_warning("%s: Smartreflex class driver already registered\n", - __func__); - return -EBUSY; - } - - sr_class = class_data; - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - list_for_each_entry(sr_info, &sr_list, node) - sr_late_init(sr_info); - - return 0; -} - -/** - * omap_sr_enable() - API to enable SR clocks and to call into the - * registered smartreflex class enable API. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to enable - * a particular smartreflex module. This API will do the initial - * configurations to turn on the smartreflex module and in turn call - * into the registered smartreflex class enable API. - */ -void omap_sr_enable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->enable(voltdm); -} - -/** - * omap_sr_disable() - API to disable SR without resetting the voltage - * processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable not to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 0); -} - -/** - * omap_sr_disable_reset_volt() - API to disable SR and reset the - * voltage processor voltage - * @voltdm: VDD pointer to which the SR module to be configured belongs to. - * - * This API is to be called from the kernel in order to disable - * a particular smartreflex module. This API will in turn call - * into the registered smartreflex class disable API. This API will tell - * the smartreflex class disable to reset the VP voltage after - * disabling smartreflex. - */ -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm) -{ - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, voltdm->name); - return; - } - - if (!sr->autocomp_active) - return; - - if (!sr_class || !(sr_class->disable)) { - dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not" - "registered\n", __func__); - return; - } - - sr_class->disable(voltdm, 1); -} - -/** - * omap_sr_register_pmic() - API to register pmic specific info. - * @pmic_data: The structure containing pmic specific data. - * - * This API is to be called from the PMIC specific code to register with - * smartreflex driver pmic specific info. Currently the only info required - * is the smartreflex init on the PMIC side. - */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data) -{ - if (!pmic_data) { - pr_warning("%s: Trying to register NULL PMIC data structure" - "with smartreflex\n", __func__); - return; - } - - sr_pmic_data = pmic_data; -} - -/* PM Debug FS entries to enable and disable smartreflex. */ -static int omap_sr_autocomp_show(void *data, u64 *val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - *val = sr_info->autocomp_active; - - return 0; -} - -static int omap_sr_autocomp_store(void *data, u64 val) -{ - struct omap_sr *sr_info = data; - - if (!sr_info) { - pr_warning("%s: omap_sr struct not found\n", __func__); - return -EINVAL; - } - - /* Sanity check */ - if (val > 1) { - pr_warning("%s: Invalid argument %lld\n", __func__, val); - return -EINVAL; - } - - /* control enable/disable only if there is a delta in value */ - if (sr_info->autocomp_active != val) { - if (!val) - sr_stop_vddautocomp(sr_info); - else - sr_start_vddautocomp(sr_info); - } - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show, - omap_sr_autocomp_store, "%llu\n"); - -static int __init omap_sr_probe(struct platform_device *pdev) -{ - struct omap_sr *sr_info; - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct resource *mem, *irq; - struct dentry *nvalue_dir; - struct omap_volt_data *volt_data; - int i, ret = 0; - char *name; - - sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); - if (!sr_info) { - dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", - __func__); - return -ENOMEM; - } - - platform_set_drvdata(pdev, sr_info); - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - ret = -EINVAL; - goto err_free_devinfo; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem resource\n", __func__); - ret = -ENODEV; - goto err_free_devinfo; - } - - mem = request_mem_region(mem->start, resource_size(mem), - dev_name(&pdev->dev)); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem region\n", __func__); - ret = -EBUSY; - goto err_free_devinfo; - } - - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - - pm_runtime_enable(&pdev->dev); - pm_runtime_irq_safe(&pdev->dev); - - sr_info->pdev = pdev; - sr_info->srid = pdev->id; - sr_info->voltdm = pdata->voltdm; - sr_info->nvalue_table = pdata->nvalue_table; - sr_info->nvalue_count = pdata->nvalue_count; - sr_info->senn_mod = pdata->senn_mod; - sr_info->senp_mod = pdata->senp_mod; - sr_info->autocomp_active = false; - sr_info->ip_type = pdata->ip_type; - sr_info->base = ioremap(mem->start, resource_size(mem)); - if (!sr_info->base) { - dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); - ret = -ENOMEM; - goto err_release_region; - } - - if (irq) - sr_info->irq = irq->start; - - sr_set_clk_length(sr_info); - sr_set_regfields(sr_info); - - list_add(&sr_info->node, &sr_list); - - /* - * Call into late init to do intializations that require - * both sr driver and sr class driver to be initiallized. - */ - if (sr_class) { - ret = sr_late_init(sr_info); - if (ret) { - pr_warning("%s: Error in SR late init\n", __func__); - goto err_iounmap; - } - } - - dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); - if (!sr_dbg_dir) { - sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); - if (IS_ERR_OR_NULL(sr_dbg_dir)) { - ret = PTR_ERR(sr_dbg_dir); - pr_err("%s:sr debugfs dir creation failed(%d)\n", - __func__, ret); - goto err_iounmap; - } - } - - name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); - if (!name) { - dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", - __func__); - ret = -ENOMEM; - goto err_iounmap; - } - sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); - kfree(name); - if (IS_ERR_OR_NULL(sr_info->dbg_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", - __func__); - ret = PTR_ERR(sr_info->dbg_dir); - goto err_iounmap; - } - - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, - sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops); - (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_weight); - (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_maxlimit); - (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir, - &sr_info->err_minlimit); - - nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir); - if (IS_ERR_OR_NULL(nvalue_dir)) { - dev_err(&pdev->dev, "%s: Unable to create debugfs directory" - "for n-values\n", __func__); - ret = PTR_ERR(nvalue_dir); - goto err_debugfs; - } - - omap_voltage_get_volttable(sr_info->voltdm, &volt_data); - if (!volt_data) { - dev_warn(&pdev->dev, "%s: No Voltage table for the" - " corresponding vdd vdd_%s. Cannot create debugfs" - "entries for n-values\n", - __func__, sr_info->voltdm->name); - ret = -ENODATA; - goto err_debugfs; - } - - for (i = 0; i < sr_info->nvalue_count; i++) { - char name[NVALUE_NAME_LEN + 1]; - - snprintf(name, sizeof(name), "volt_%d", - volt_data[i].volt_nominal); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, - &(sr_info->nvalue_table[i].nvalue)); - } - - return ret; - -err_debugfs: - debugfs_remove_recursive(sr_info->dbg_dir); -err_iounmap: - list_del(&sr_info->node); - iounmap(sr_info->base); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); -err_free_devinfo: - kfree(sr_info); - - return ret; -} - -static int __devexit omap_sr_remove(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - struct resource *mem; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return PTR_ERR(sr_info); - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - if (sr_info->dbg_dir) - debugfs_remove_recursive(sr_info->dbg_dir); - - list_del(&sr_info->node); - iounmap(sr_info->base); - kfree(sr_info); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - - return 0; -} - -static void __devexit omap_sr_shutdown(struct platform_device *pdev) -{ - struct omap_sr_data *pdata = pdev->dev.platform_data; - struct omap_sr *sr_info; - - if (!pdata) { - dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return; - } - - sr_info = _sr_lookup(pdata->voltdm); - if (IS_ERR(sr_info)) { - dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", - __func__); - return; - } - - if (sr_info->autocomp_active) - sr_stop_vddautocomp(sr_info); - - return; -} - -static struct platform_driver smartreflex_driver = { - .remove = __devexit_p(omap_sr_remove), - .shutdown = __devexit_p(omap_sr_shutdown), - .driver = { - .name = "smartreflex", - }, -}; - -static int __init sr_init(void) -{ - int ret = 0; - - /* - * sr_init is a late init. If by then a pmic specific API is not - * registered either there is no need for anything to be done on - * the PMIC side or somebody has forgotten to register a PMIC - * handler. Warn for the second condition. - */ - if (sr_pmic_data && sr_pmic_data->sr_pmic_init) - sr_pmic_data->sr_pmic_init(); - else - pr_warning("%s: No PMIC hook to init smartreflex\n", __func__); - - ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe); - if (ret) { - pr_err("%s: platform driver register failed for SR\n", - __func__); - return ret; - } - - return 0; -} -late_initcall(sr_init); - -static void __exit sr_exit(void) -{ - platform_driver_unregister(&smartreflex_driver); -} -module_exit(sr_exit); - -MODULE_DESCRIPTION("OMAP Smartreflex Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); -MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h deleted file mode 100644 index 5809141171f..00000000000 --- a/arch/arm/mach-omap2/smartreflex.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * OMAP Smartreflex Defines and Routines - * - * Author: Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Thara Gopinath <thara@ti.com> - * - * Copyright (C) 2008 Nokia Corporation - * Kalle Jokiniemi - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H -#define __ASM_ARM_OMAP_SMARTREFLEX_H - -#include <linux/platform_device.h> - -#include "voltage.h" - -/* - * Different Smartreflex IPs version. The v1 is the 65nm version used in - * OMAP3430. The v2 is the update for the 45nm version of the IP - * used in OMAP3630 and OMAP4430 - */ -#define SR_TYPE_V1 1 -#define SR_TYPE_V2 2 - -/* SMART REFLEX REG ADDRESS OFFSET */ -#define SRCONFIG 0x00 -#define SRSTATUS 0x04 -#define SENVAL 0x08 -#define SENMIN 0x0C -#define SENMAX 0x10 -#define SENAVG 0x14 -#define AVGWEIGHT 0x18 -#define NVALUERECIPROCAL 0x1c -#define SENERROR_V1 0x20 -#define ERRCONFIG_V1 0x24 -#define IRQ_EOI 0x20 -#define IRQSTATUS_RAW 0x24 -#define IRQSTATUS 0x28 -#define IRQENABLE_SET 0x2C -#define IRQENABLE_CLR 0x30 -#define SENERROR_V2 0x34 -#define ERRCONFIG_V2 0x38 - -/* Bit/Shift Positions */ - -/* SRCONFIG */ -#define SRCONFIG_ACCUMDATA_SHIFT 22 -#define SRCONFIG_SRCLKLENGTH_SHIFT 12 -#define SRCONFIG_SENNENABLE_V1_SHIFT 5 -#define SRCONFIG_SENPENABLE_V1_SHIFT 3 -#define SRCONFIG_SENNENABLE_V2_SHIFT 1 -#define SRCONFIG_SENPENABLE_V2_SHIFT 0 -#define SRCONFIG_CLKCTRL_SHIFT 0 - -#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) - -#define SRCONFIG_SRENABLE BIT(11) -#define SRCONFIG_SENENABLE BIT(10) -#define SRCONFIG_ERRGEN_EN BIT(9) -#define SRCONFIG_MINMAXAVG_EN BIT(8) -#define SRCONFIG_DELAYCTRL BIT(2) - -/* AVGWEIGHT */ -#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 -#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 - -/* NVALUERECIPROCAL */ -#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 -#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 -#define NVALUERECIPROCAL_RNSENP_SHIFT 8 -#define NVALUERECIPROCAL_RNSENN_SHIFT 0 - -/* ERRCONFIG */ -#define ERRCONFIG_ERRWEIGHT_SHIFT 16 -#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 -#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 - -#define SR_ERRWEIGHT_MASK (0x07 << 16) -#define SR_ERRMAXLIMIT_MASK (0xff << 8) -#define SR_ERRMINLIMIT_MASK (0xff << 0) - -#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) -#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) -#define ERRCONFIG_MCUACCUMINTEN BIT(29) -#define ERRCONFIG_MCUACCUMINTST BIT(28) -#define ERRCONFIG_MCUVALIDINTEN BIT(27) -#define ERRCONFIG_MCUVALIDINTST BIT(26) -#define ERRCONFIG_MCUBOUNDINTEN BIT(25) -#define ERRCONFIG_MCUBOUNDINTST BIT(24) -#define ERRCONFIG_MCUDISACKINTEN BIT(23) -#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) -#define ERRCONFIG_MCUDISACKINTST BIT(22) -#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) - -#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ - ERRCONFIG_MCUACCUMINTST | \ - ERRCONFIG_MCUVALIDINTST | \ - ERRCONFIG_MCUBOUNDINTST | \ - ERRCONFIG_MCUDISACKINTST) -/* IRQSTATUS */ -#define IRQSTATUS_MCUACCUMINT BIT(3) -#define IRQSTATUS_MCVALIDINT BIT(2) -#define IRQSTATUS_MCBOUNDSINT BIT(1) -#define IRQSTATUS_MCUDISABLEACKINT BIT(0) - -/* IRQENABLE_SET and IRQENABLE_CLEAR */ -#define IRQENABLE_MCUACCUMINT BIT(3) -#define IRQENABLE_MCUVALIDINT BIT(2) -#define IRQENABLE_MCUBOUNDSINT BIT(1) -#define IRQENABLE_MCUDISABLEACKINT BIT(0) - -/* Common Bit values */ - -#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c -#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 -#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 -#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 -#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 - -/* - * 3430 specific values. Maybe these should be passed from board file or - * pmic structures. - */ -#define OMAP3430_SR_ACCUMDATA 0x1f4 - -#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 -#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 - -#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 -#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 - -#define OMAP3430_SR_ERRWEIGHT 0x04 -#define OMAP3430_SR_ERRMAXLIMIT 0x02 - -/** - * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass - * pmic specific info to smartreflex driver - * - * @sr_pmic_init: API to initialize smartreflex on the PMIC side. - */ -struct omap_sr_pmic_data { - void (*sr_pmic_init) (void); -}; - -/** - * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. - * - * @sensor_voltdm_name: Name of voltdomain of SR instance - */ -struct omap_smartreflex_dev_attr { - const char *sensor_voltdm_name; -}; - -#ifdef CONFIG_OMAP_SMARTREFLEX -/* - * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. - * The smartreflex class driver should pass the class type. - * Should be used to populate the class_type field of the - * omap_smartreflex_class_data structure. - */ -#define SR_CLASS1 0x1 -#define SR_CLASS2 0x2 -#define SR_CLASS3 0x3 - -/** - * struct omap_sr_class_data - Smartreflex class driver info - * - * @enable: API to enable a particular class smaartreflex. - * @disable: API to disable a particular class smartreflex. - * @configure: API to configure a particular class smartreflex. - * @notify: API to notify the class driver about an event in SR. - * Not needed for class3. - * @notify_flags: specify the events to be notified to the class driver - * @class_type: specify which smartreflex class. - * Can be used by the SR driver to take any class - * based decisions. - */ -struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); - u8 notify_flags; - u8 class_type; -}; - -/** - * struct omap_sr_nvalue_table - Smartreflex n-target value info - * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. - */ -struct omap_sr_nvalue_table { - u32 efuse_offs; - u32 nvalue; -}; - -/** - * struct omap_sr_data - Smartreflex platform data. - * - * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr - * @nvalue_count: Number of distinct nvalues in the nvalue table - * @enable_on_init: whether this sr module needs to enabled at - * boot up or not. - * @nvalue_table: table containing the efuse offsets and nvalues - * corresponding to them. - * @voltdm: Pointer to the voltage domain associated with the SR - */ -struct omap_sr_data { - int ip_type; - u32 senp_mod; - u32 senn_mod; - int nvalue_count; - bool enable_on_init; - struct omap_sr_nvalue_table *nvalue_table; - struct voltagedomain *voltdm; -}; - -/* Smartreflex module enable/disable interface */ -void omap_sr_enable(struct voltagedomain *voltdm); -void omap_sr_disable(struct voltagedomain *voltdm); -void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); - -/* API to register the pmic specific data with the smartreflex driver. */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); - -/* Smartreflex driver hooks to be called from Smartreflex class driver */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt); -void sr_disable(struct voltagedomain *voltdm); -int sr_configure_errgen(struct voltagedomain *voltdm); -int sr_disable_errgen(struct voltagedomain *voltdm); -int sr_configure_minmax(struct voltagedomain *voltdm); - -/* API to register the smartreflex class driver with the smartreflex driver */ -int sr_register_class(struct omap_sr_class_data *class_data); -#else -static inline void omap_sr_enable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable(struct voltagedomain *voltdm) {} -static inline void omap_sr_disable_reset_volt( - struct voltagedomain *voltdm) {} -static inline void omap_sr_register_pmic( - struct omap_sr_pmic_data *pmic_data) {} -#endif -#endif diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index a503e1e8358..d033a65f4e4 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -17,6 +17,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/power/smartreflex.h> #include <linux/err.h> #include <linux/slab.h> @@ -24,7 +25,6 @@ #include <plat/omap_device.h> -#include "smartreflex.h" #include "voltage.h" #include "control.h" #include "pm.h" @@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, struct omap_sr_data *sr_data) { struct omap_sr_nvalue_table *nvalue_table; - int i, count = 0; + int i, j, count = 0; + + sr_data->nvalue_count = 0; + sr_data->nvalue_table = NULL; while (volt_data[count].volt_nominal) count++; @@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count, GFP_KERNEL); - for (i = 0; i < count; i++) { + if (!nvalue_table) { + pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n"); + return; + } + + for (i = 0, j = 0; i < count; i++) { u32 v; + /* * In OMAP4 the efuse registers are 24 bit aligned. * A __raw_readl will fail for non-32 bit aligned address @@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, omap_ctrl_readb(offset + 1) << 8 | omap_ctrl_readb(offset + 2) << 16; } else { - v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); + v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); } - nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs; - nvalue_table[i].nvalue = v; + /* + * Many OMAP SoCs don't have the eFuse values set. + * For example, pretty much all OMAP3xxx before + * ES3.something. + * + * XXX There needs to be some way for board files or + * userspace to add these in. + */ + if (v == 0) + continue; + + nvalue_table[j].nvalue = v; + nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs; + nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit; + nvalue_table[j].volt_nominal = volt_data[i].volt_nominal; + + j++; } sr_data->nvalue_table = nvalue_table; - sr_data->nvalue_count = count; + sr_data->nvalue_count = j; } static int __init sr_dev_init(struct omap_hwmod *oh, void *user) @@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) goto exit; } + sr_data->name = oh->name; sr_data->ip_type = oh->class->rev; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; @@ -106,7 +131,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) omap_voltage_get_volttable(sr_data->voltdm, &volt_data); if (!volt_data) { - pr_warning("%s: No Voltage table registerd fo VDD%d." + pr_warning("%s: No Voltage table registered fo VDD%d." "Something really wrong\n\n", __func__, i + 1); goto exit; } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 840929bd9da..13d20c8a283 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -69,11 +69,6 @@ #define OMAP3_SECURE_TIMER 1 #endif -/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ -#define MAX_GPTIMER_ID 12 - -static u32 sys_timer_reserved; - /* Clockevent code */ static struct omap_dm_timer clkev; @@ -173,14 +168,14 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, return -ENXIO; /* After the dmtimer is using hwmod these clocks won't be needed */ - sprintf(name, "gpt%d_fck", gptimer_id); - timer->fclk = clk_get(NULL, name); + timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) return -ENODEV; omap_hwmod_enable(oh); - sys_timer_reserved |= (1 << (gptimer_id - 1)); + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; if (gptimer_id != 12) { struct clk *src; @@ -368,6 +363,11 @@ OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, OMAP_SYS_TIMER(3_secure) #endif +#ifdef CONFIG_SOC_AM33XX +OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER(3_am33xx) +#endif + #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, @@ -393,65 +393,10 @@ static void __init omap4_timer_init(void) OMAP_SYS_TIMER(4) #endif -/** - * omap2_dm_timer_set_src - change the timer input clock source - * @pdev: timer platform device pointer - * @source: array index of parent clock source - */ -static int omap2_dm_timer_set_src(struct platform_device *pdev, int source) -{ - int ret; - struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - struct clk *fclk, *parent; - char *parent_name = NULL; - - fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n", - __func__, __LINE__); - return -EINVAL; - } - - switch (source) { - case OMAP_TIMER_SRC_SYS_CLK: - parent_name = "sys_ck"; - break; - - case OMAP_TIMER_SRC_32_KHZ: - parent_name = "32k_ck"; - break; - - case OMAP_TIMER_SRC_EXT_CLK: - if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) { - parent_name = "alt_ck"; - break; - } - dev_err(&pdev->dev, "%s: %d: invalid clk src.\n", - __func__, __LINE__); - clk_put(fclk); - return -EINVAL; - } - - parent = clk_get(&pdev->dev, parent_name); - if (IS_ERR_OR_NULL(parent)) { - dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n", - __func__, __LINE__, parent_name); - clk_put(fclk); - return -EINVAL; - } - - ret = clk_set_parent(fclk, parent); - if (IS_ERR_VALUE(ret)) { - dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n", - __func__, parent_name); - ret = -EINVAL; - } - - clk_put(parent); - clk_put(fclk); - - return ret; -} +#ifdef CONFIG_SOC_OMAP5 +OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER(5) +#endif /** * omap_timer_init - build and register timer device with an @@ -473,7 +418,6 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) struct dmtimer_platform_data *pdata; struct platform_device *pdev; struct omap_timer_capability_dev_attr *timer_dev_attr; - struct powerdomain *pwrdm; pr_debug("%s: %s\n", __func__, oh->name); @@ -501,18 +445,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) */ sscanf(oh->name, "timer%2d", &id); - pdata->set_timer_src = omap2_dm_timer_set_src; - pdata->timer_ip_version = oh->class->rev; + if (timer_dev_attr) + pdata->timer_capability = timer_dev_attr->timer_capability; - /* Mark clocksource and clockevent timers as reserved */ - if ((sys_timer_reserved >> (id - 1)) & 0x1) - pdata->reserved = 1; - - pwrdm = omap_hwmod_get_pwrdm(oh); - pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); -#ifdef CONFIG_PM - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; -#endif pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 43a97907533..de47f170ba5 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -49,6 +49,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { struct voltagedomain *voltdm = (struct voltagedomain *)data; @@ -60,6 +61,7 @@ static int twl_get_voltage(void *data) struct voltagedomain *voltdm = (struct voltagedomain *)data; return voltdm_get_voltage(voltdm); } +#endif void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -94,7 +96,7 @@ void __init omap4_pmic_init(const char *pmic_type, void __init omap_pmic_late_init(void) { - /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + /* Init the OMAP TWL parameters (if PMIC has been registered) */ if (pmic_i2c_board_info.irq) omap3_twl_init(); if (omap4_i2c1_board_info[0].irq) @@ -213,10 +215,6 @@ static struct twl_regulator_driver_data omap3_vdd2_drvdata = { void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; if (!pmic_data->vdd1) { omap3_vdd1.driver_data = &omap3_vdd1_drvdata; omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); @@ -481,11 +479,6 @@ static struct regulator_init_data omap4_v2v1_idata = { void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL6030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL6030_IRQ_END; - if (!pmic_data->vdd1) { omap4_vdd1.driver_data = &omap4_vdd1_drvdata; omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c deleted file mode 100644 index 1481078763b..00000000000 --- a/arch/arm/mach-omap2/usb-fs.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/irq.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include "control.h" -#include "mux.h" - -#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN -#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO -#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO -#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN -#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG - -#if defined(CONFIG_ARCH_OMAP2) - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ - pdata->udc_device = &udc_device; -} - -#else - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ - pdata->ohci_device = &ohci_device; -} - -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ - pdata->otg_device = &otg_device; -} - -#else - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -static void omap2_usb_devconf_clear(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb_devconf_set(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_disable_5pinbitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_enable_5pinunitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(0, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - if (is_device) - omap_mux_init_signal("usb0_puen", 0); - - omap_mux_init_signal("usb0_dat", 0); - omap_mux_init_signal("usb0_txen", 0); - omap_mux_init_signal("usb0_se0", 0); - if (nwires != 3) - omap_mux_init_signal("usb0_rcv", 0); - - switch (nwires) { - case 3: - syscon1 = 2; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 6: - syscon1 = 3; - omap_mux_init_signal("usb0_vp", 0); - omap_mux_init_signal("usb0_vm", 0); - omap2_usb_devconf_set(0, USB_UNIDIR); - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - - return syscon1 << 16; -} - -static u32 __init omap2_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(1, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - /* NOTE: board-specific code must set up pin muxing for usb1, - * since each signal could come out on either of two balls. - */ - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - - return syscon1 << 20; -} - -static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - omap2_usb2_disable_5pinbitll(); - alt_pingroup = 0; - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - omap_mux_init_signal("usb2_dat", 0); - omap_mux_init_signal("usb2_se0", 0); - if (nwires > 2) - omap_mux_init_signal("usb2_txen", 0); - if (nwires > 3) - omap_mux_init_signal("usb2_rcv", 0); - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 5: - /* NOTE: board-specific code must mux this setting depending - * on TLL link using DP/DM. Something must also - * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} - * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 - * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 - */ - - syscon1 = 3; - omap2_usb2_enable_5pinunitll(); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - - return syscon1 << 24; -} - -void __init omap2_usbfs_init(struct omap_usb_config *pdata) -{ - struct clk *ick; - - if (!cpu_is_omap24xx()) - return; - - ick = clk_get(NULL, "usb_l4_ick"); - if (IS_ERR(ick)) - return; - - clk_enable(ick); - pdata->usb0_init = omap2_usb0_init; - pdata->usb1_init = omap2_usb1_init; - pdata->usb2_init = omap2_usb2_init; - udc_device_init(pdata); - ohci_device_init(pdata); - otg_device_init(pdata); - omap_otg_init(pdata); - clk_disable(ick); - clk_put(ick); -} - -#endif diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b092cf3..0ac2caf1594 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,6 +16,8 @@ #include <linux/err.h> +#include <plat/voltage.h> + #include "vc.h" #include "vp.h" @@ -91,25 +93,6 @@ struct voltagedomain { }; /** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; - -/** * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) @@ -156,6 +139,7 @@ int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); +extern void am33xx_voltagedomains_init(void); extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); diff --git a/arch/arm/mach-omap2/voltagedomains33xx_data.c b/arch/arm/mach-omap2/voltagedomains33xx_data.c new file mode 100644 index 00000000000..965458dc0cb --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains33xx_data.c @@ -0,0 +1,43 @@ +/* + * AM33XX voltage domain data + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "voltage.h" + +static struct voltagedomain am33xx_voltdm_mpu = { + .name = "mpu", +}; + +static struct voltagedomain am33xx_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain am33xx_voltdm_rtc = { + .name = "rtc", +}; + +static struct voltagedomain *voltagedomains_am33xx[] __initdata = { + &am33xx_voltdm_mpu, + &am33xx_voltdm_core, + &am33xx_voltdm_rtc, + NULL, +}; + +void __init am33xx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_am33xx); +} diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile index e5ec4a8d9bc..8e39f80fce1 100644 --- a/arch/arm/mach-picoxcell/Makefile +++ b/arch/arm/mach-picoxcell/Makefile @@ -1,2 +1 @@ obj-y := common.o -obj-y += time.o diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index a2e8ae8b582..8f9a0b47a7f 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -14,6 +14,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/dw_apb_timer.h> #include <asm/mach/arch.h> #include <asm/hardware/vic.h> @@ -97,7 +98,7 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .nr_irqs = NR_IRQS_LEGACY, .init_irq = picoxcell_init_irq, .handle_irq = vic_handle_irq, - .timer = &picoxcell_timer, + .timer = &dw_apb_timer, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, .restart = picoxcell_wdt_restart, diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h index 83d55ab956a..a65cb02f84c 100644 --- a/arch/arm/mach-picoxcell/common.h +++ b/arch/arm/mach-picoxcell/common.h @@ -12,6 +12,6 @@ #include <asm/mach/time.h> -extern struct sys_timer picoxcell_timer; +extern struct sys_timer dw_apb_timer; #endif /* __PICOXCELL_COMMON_H__ */ diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c deleted file mode 100644 index 2ecba6743b8..00000000000 --- a/arch/arm/mach-picoxcell/time.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * All enquiries to support@picochip.com - */ -#include <linux/dw_apb_timer.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> - -#include "common.h" - -static void timer_get_base_and_rate(struct device_node *np, - void __iomem **base, u32 *rate) -{ - *base = of_iomap(np, 0); - - if (!*base) - panic("Unable to map regs for %s", np->name); - - if (of_property_read_u32(np, "clock-freq", rate)) - panic("No clock-freq property for %s", np->name); -} - -static void picoxcell_add_clockevent(struct device_node *event_timer) -{ - void __iomem *iobase; - struct dw_apb_clock_event_device *ced; - u32 irq, rate; - - irq = irq_of_parse_and_map(event_timer, 0); - if (irq == NO_IRQ) - panic("No IRQ for clock event timer"); - - timer_get_base_and_rate(event_timer, &iobase, &rate); - - ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq, - rate); - if (!ced) - panic("Unable to initialise clockevent device"); - - dw_apb_clockevent_register(ced); -} - -static void picoxcell_add_clocksource(struct device_node *source_timer) -{ - void __iomem *iobase; - struct dw_apb_clocksource *cs; - u32 rate; - - timer_get_base_and_rate(source_timer, &iobase, &rate); - - cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate); - if (!cs) - panic("Unable to initialise clocksource device"); - - dw_apb_clocksource_start(cs); - dw_apb_clocksource_register(cs); -} - -static void __iomem *sched_io_base; - -static u32 picoxcell_read_sched_clock(void) -{ - return __raw_readl(sched_io_base); -} - -static const struct of_device_id picoxcell_rtc_ids[] __initconst = { - { .compatible = "picochip,pc3x2-rtc" }, - { /* Sentinel */ }, -}; - -static void picoxcell_init_sched_clock(void) -{ - struct device_node *sched_timer; - u32 rate; - - sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids); - if (!sched_timer) - panic("No RTC for sched clock to use"); - - timer_get_base_and_rate(sched_timer, &sched_io_base, &rate); - of_node_put(sched_timer); - - setup_sched_clock(picoxcell_read_sched_clock, 32, rate); -} - -static const struct of_device_id picoxcell_timer_ids[] __initconst = { - { .compatible = "picochip,pc3x2-timer" }, - {}, -}; - -static void __init picoxcell_timer_init(void) -{ - struct device_node *event_timer, *source_timer; - - event_timer = of_find_matching_node(NULL, picoxcell_timer_ids); - if (!event_timer) - panic("No timer for clockevent"); - picoxcell_add_clockevent(event_timer); - - source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids); - if (!source_timer) - panic("No timer for clocksource"); - picoxcell_add_clocksource(source_timer); - - of_node_put(source_timer); - - picoxcell_init_sched_clock(); -} - -struct sys_timer picoxcell_timer = { - .init = picoxcell_timer_init, -}; diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h new file mode 100644 index 00000000000..1904bb03876 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/gpio.h @@ -0,0 +1,13 @@ +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +/* Pull up/down values */ +enum sirfsoc_gpio_pull { + SIRFSOC_GPIO_PULL_NONE, + SIRFSOC_GPIO_PULL_UP, + SIRFSOC_GPIO_PULL_DOWN, +}; + +void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); + +#endif diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h index bb354f952fd..f6014a07541 100644 --- a/arch/arm/mach-prima2/include/mach/irqs.h +++ b/arch/arm/mach-prima2/include/mach/irqs.h @@ -11,7 +11,7 @@ #define SIRFSOC_INTENAL_IRQ_START 0 #define SIRFSOC_INTENAL_IRQ_END 59 - +#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1) #define NR_IRQS 220 #endif diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h deleted file mode 100644 index b96949dd5ad..00000000000 --- a/arch/arm/mach-pxa/eseries.h +++ /dev/null @@ -1,14 +0,0 @@ -void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi); - -extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info; -extern struct pxaficp_platform_data e7xx_ficp_platform_data; -extern int e7xx_irda_init(void); - -extern int eseries_tmio_enable(struct platform_device *dev); -extern int eseries_tmio_disable(struct platform_device *dev); -extern int eseries_tmio_suspend(struct platform_device *dev); -extern int eseries_tmio_resume(struct platform_device *dev); -extern void eseries_get_tmio_gpios(void); -extern struct resource eseries_tmio_resources[]; -extern struct platform_device e300_tc6387xb_device; - diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d3de84b0dcb..e6311988add 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -296,27 +296,11 @@ static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { static struct resource asic3_resources[] = { /* GPIO part */ - [0] = { - .start = ASIC3_PHYS, - .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT), + [1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)), /* SD part */ - [2] = { - .start = ASIC3_SD_PHYS, - .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .flags = IORESOURCE_IRQ, - }, + [2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT), + [3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)), }; static struct asic3_platform_data asic3_platform_data = { @@ -343,11 +327,7 @@ static struct platform_device asic3 = { */ static struct resource egpio_resources[] = { - [0] = { - .start = PXA_CS5_PHYS, - .end = PXA_CS5_PHYS + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4), }; static struct htc_egpio_chip egpio_chips[] = { @@ -537,11 +517,7 @@ static struct w100fb_mach_info w3220_info = { }; static struct resource w3220_resources[] = { - [0] = { - .start = ATI_W3220_PHYS, - .end = ATI_W3220_PHYS + 0x00ffffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M), }; static struct platform_device w3220 = { @@ -683,20 +659,12 @@ static struct pda_power_pdata power_supply_info = { }; static struct resource power_supply_resources[] = { - [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), - .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), - }, - [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), - .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), - }, + [0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac", + IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE), + [1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb", + IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE), }; static struct platform_device power_supply = { diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h index a3e5f86ef67..628819995c5 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -7,17 +7,17 @@ * OS Timer & Match Registers */ -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ +#define OSMR0 io_p2v(0x40A00000) /* */ +#define OSMR1 io_p2v(0x40A00004) /* */ +#define OSMR2 io_p2v(0x40A00008) /* */ +#define OSMR3 io_p2v(0x40A0000C) /* */ +#define OSMR4 io_p2v(0x40A00080) /* */ +#define OSCR io_p2v(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 io_p2v(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 io_p2v(0x40A000C0) /* */ +#define OSSR io_p2v(0x40A00014) /* OS Timer Status Register */ +#define OWER io_p2v(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER io_p2v(0x40A0001C) /* OS Timer Interrupt Enable Register */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6bb3f47b1f1..0ca0db78790 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -456,7 +456,7 @@ static int lubbock_mci_init(struct device *dev, init_timer(&mmc_timer); mmc_timer.data = (unsigned long) data; return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, - IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data); + 0, "lubbock-sd-detect", data); } static int lubbock_mci_get_ro(struct device *dev) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 2db697cd2b4..39561dcf65f 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -633,9 +633,8 @@ static struct platform_device bq24022 = { static int magician_mci_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_MAGICIAN_SD, detect_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - "mmc card detect", data); + return request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED, + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index b4528899ef0..3fab583755d 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -77,9 +77,10 @@ static void do_gpio_reset(void) static void do_hw_reset(void) { /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ + writel_relaxed(OWER_WME, OWER); + writel_relaxed(OSSR_M3, OSSR); + /* ... in 100 ms */ + writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3); } void pxa_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 3d6c9bd90de..4bc47d63698 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -35,7 +35,7 @@ static u32 notrace pxa_read_sched_clock(void) { - return OSCR; + return readl_relaxed(OSCR); } @@ -47,8 +47,8 @@ pxa_ost0_interrupt(int irq, void *dev_id) struct clock_event_device *c = dev_id; /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); c->event_handler(c); return IRQ_HANDLED; @@ -59,10 +59,10 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) { unsigned long next, oscr; - OIER |= OIER_E0; - next = OSCR + delta; - OSMR0 = next; - oscr = OSCR; + writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); + next = readl_relaxed(OSCR) + delta; + writel_relaxed(next, OSMR0); + oscr = readl_relaxed(OSCR); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -72,15 +72,15 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) { switch (mode) { case CLOCK_EVT_MODE_ONESHOT: - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* initializing, released, or preparing for suspend */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_RESUME: @@ -108,8 +108,8 @@ static void __init pxa_timer_init(void) { unsigned long clock_tick_rate = get_clock_tick_rate(); - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); @@ -122,7 +122,7 @@ static void __init pxa_timer_init(void) setup_irq(IRQ_OST0, &pxa_ost0_irq); - clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32, + clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, clocksource_mmio_readl_up); clockevents_register_device(&ckevt_pxa_osmr0); } @@ -132,12 +132,12 @@ static unsigned long osmr[4], oier, oscr; static void pxa_timer_suspend(void) { - osmr[0] = OSMR0; - osmr[1] = OSMR1; - osmr[2] = OSMR2; - osmr[3] = OSMR3; - oier = OIER; - oscr = OSCR; + osmr[0] = readl_relaxed(OSMR0); + osmr[1] = readl_relaxed(OSMR1); + osmr[2] = readl_relaxed(OSMR2); + osmr[3] = readl_relaxed(OSMR3); + oier = readl_relaxed(OIER); + oscr = readl_relaxed(OSCR); } static void pxa_timer_resume(void) @@ -151,12 +151,12 @@ static void pxa_timer_resume(void) if (osmr[0] - oscr < MIN_OSCR_DELTA) osmr[0] += MIN_OSCR_DELTA; - OSMR0 = osmr[0]; - OSMR1 = osmr[1]; - OSMR2 = osmr[2]; - OSMR3 = osmr[3]; - OIER = oier; - OSCR = oscr; + writel_relaxed(osmr[0], OSMR0); + writel_relaxed(osmr[1], OSMR1); + writel_relaxed(osmr[2], OSMR2); + writel_relaxed(osmr[3], OSMR3); + writel_relaxed(oier, OIER); + writel_relaxed(oscr, OSCR); } #else #define pxa_timer_suspend NULL diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 2b6ac00b2cd..166dd32cc1d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -332,8 +332,8 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, int err; err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, - "MMC card detect", data); + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "MMC card detect", data); if (err) { printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" "MMC card detect IRQ\n"); diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index cf0e669eaf1..3e4fa849c64 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -163,6 +163,6 @@ void __init rpc_init_irq(void) } } - init_FIQ(); + init_FIQ(FIQ_START); } diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 8702ecfaab3..14a81c2317a 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk), + /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), }; void __init s3c2416_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364eb426..cb2883d553b 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, + .ctrlbit = S3C2440_CLKCON_AC97, }; static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index a4c5a520d99..7f689ce1be6 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = { static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), }; void __init s3c2443_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index aeeb2be283f..aeb4a24ff3e 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = { static struct clk hsspi_clk = { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s3c2443-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_HSSPI, @@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), }; void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad..87e75a250d5 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = { &smdk_led7, }; +static const struct gpio smdk_led_gpios[] = { + { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL }, +}; + void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - - s3c2410_gpio_setpin(S3C2410_GPF(4), 1); - s3c2410_gpio_setpin(S3C2410_GPF(5), 1); - s3c2410_gpio_setpin(S3C2410_GPF(6), 1); - s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + int ret = gpio_request_array(smdk_led_gpios, + ARRAY_SIZE(smdk_led_gpios)); + if (!WARN_ON(ret < 0)) + gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios)); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 56cdd34cce4..0c9e9a785ef 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -41,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h deleted file mode 100644 index 4c38b39b741..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f..3890a05948f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h @@ -93,26 +93,5 @@ enum s3c_gpio_number { #define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) #define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) -/* compatibility until drivers can be modified */ - -#define S3C2410_GPA0 S3C2410_GPA(0) -#define S3C2410_GPA1 S3C2410_GPA(1) -#define S3C2410_GPA3 S3C2410_GPA(3) -#define S3C2410_GPA7 S3C2410_GPA(7) - -#define S3C2410_GPE0 S3C2410_GPE(0) -#define S3C2410_GPE1 S3C2410_GPE(1) -#define S3C2410_GPE2 S3C2410_GPE(2) -#define S3C2410_GPE3 S3C2410_GPE(3) -#define S3C2410_GPE4 S3C2410_GPE(4) -#define S3C2410_GPE5 S3C2410_GPE(5) -#define S3C2410_GPE6 S3C2410_GPE(6) -#define S3C2410_GPE7 S3C2410_GPE(7) -#define S3C2410_GPE8 S3C2410_GPE(8) -#define S3C2410_GPE9 S3C2410_GPE(9) -#define S3C2410_GPE10 S3C2410_GPE(10) - -#define S3C2410_GPH10 S3C2410_GPH(10) - #endif /* __MACH_GPIONRS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac..21739348215 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h @@ -3,82 +3,13 @@ #include <mach/regs-gpio.h> -/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -#define GTA02v1_SYSTEM_REV 0x00000310 -#define GTA02v2_SYSTEM_REV 0x00000320 -#define GTA02v3_SYSTEM_REV 0x00000330 -#define GTA02v4_SYSTEM_REV 0x00000340 -#define GTA02v5_SYSTEM_REV 0x00000350 -/* since A7 is basically same as A6, we use A6 PCB ID */ -#define GTA02v6_SYSTEM_REV 0x00000360 - -#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ - -#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) -#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) #define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) -#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) -#define GTA02_GPIO_BT_EN S3C2410_GPB(6) -#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) -#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) #define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) - -#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ - -#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ -#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ -#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ - -#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) -#define GTA02_GPIO_IO1 S3C2410_GPF(1) -#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) -#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ #define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) #define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) - -#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) -#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ -#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ - #define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) #define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) -#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) -#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ -#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) -#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) -#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) -#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) -#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ -#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -#define GTA02_IRQ_MODEM IRQ_EINT1 -#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -#define GTA02_IRQ_AUX IRQ_EINT6 -#define GTA02_IRQ_nHOLD IRQ_EINT7 #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#define GTA02_IRQ_3D IRQ_EINT12 -#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ - -/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -#define GTA02_PCB_ID1_0 S3C2410_GPC(13) -#define GTA02_PCB_ID1_1 S3C2410_GPC(15) -#define GTA02_PCB_ID1_2 S3C2410_GPD(0) -#define GTA02_PCB_ID2_0 S3C2410_GPD(3) -#define GTA02_PCB_ID2_1 S3C2410_GPD(4) - -int gta02_get_pcb_revision(void); #endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582..a11a638bd59 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -302,7 +302,7 @@ /* S3C2410: * Port G consists of 8 GPIO/IRQ/Special function * - * GPGCON has 2 bits for each of the input pins on port F + * GPGCON has 2 bits for each of the input pins on port G * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -366,7 +366,7 @@ /* Port H consists of11 GPIO/serial/Misc pins * - * GPGCON has 2 bits for each of the input pins on port F + * GPHCON has 2 bits for each of the input pins on port H * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -427,6 +427,19 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* + * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits + * for each of the pins on port J. + * 00 - input, 01 output, 10 - camera + * + * Pull up works like all other ports. + */ + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + /* S3C2443 and above */ #define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) #define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e06111..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 0f29f64a3ee..92e1f93a6bc 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -71,7 +71,6 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/fb.h> #include <plat/usb-control.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index f092b188ab7..bd6d2525deb 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -634,8 +634,8 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); - gpio_direction_output(S3C2410_GPG(4), 1); + WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPG(4)); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b868dddcb83..678bbca2b5e 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/regs-gpio.h> #include <mach/leds-gpio.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> @@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(0), 1); + /* set initial state of the LED GPIO */ + WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPB(0)); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a6762aae472..7ee73f27f20 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd600..949ae05e07c 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -77,8 +77,10 @@ static void s3c2410_pm_prepare(void) __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(2)); + } if (machine_is_rx1950()) { /* According to S3C2442 user's manual, page 7-17, @@ -103,8 +105,10 @@ static void s3c2410_pm_resume(void) tmp &= S3C2410_GSTATUS2_OFFRESET; __raw_writel(tmp, S3C2410_GSTATUS2); - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); + } } struct syscore_ops s3c2410_pm_syscore_ops = { diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec..c60f67a75af 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <mach/regs-power.h> -#include <mach/regs-gpioj.h> #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d4bc7f960bb..6c5f4031ff0 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -39,7 +39,6 @@ #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 6f74118f60c..b0b60a1154d 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c index 5712c85f39b..3d47e023ce9 100644 --- a/arch/arm/mach-s3c24xx/setup-spi.c +++ b/arch/arm/mach-s3c24xx/setup-spi.c @@ -13,20 +13,12 @@ #include <linux/platform_device.h> #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, - .high_speed = 1, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev) +int s3c64xx_spi0_cfg_gpio(void) { /* enable hsspi bit in misccr */ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1); diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed263866367..4e11affce3a 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -16,7 +16,6 @@ struct platform_device; /* don't need the contents */ #include <mach/hardware.h> -#include <mach/regs-gpio.h> /** * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems @@ -27,8 +26,5 @@ struct platform_device; /* don't need the contents */ */ void s3c24xx_ts_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); + s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 52f079a691c..28041e83dc8 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -178,13 +178,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI0, }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI1, @@ -331,7 +331,7 @@ static struct clk init_clocks_off[] = { static struct clk clk_48m_spi0 = { .name = "spi_48m", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, @@ -339,7 +339,7 @@ static struct clk clk_48m_spi0 = { static struct clk clk_48m_spi1 = { .name = "spi_48m", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, @@ -802,7 +802,7 @@ static struct clksrc_clk clk_sclk_mmc2 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "spi-bus", - .devname = "s3c64xx-spi.0", + .devname = "s3c6410-spi.0", .ctrlbit = S3C_CLKCON_SCLK_SPI0, .enable = s3c64xx_sclk_ctrl, }, @@ -814,7 +814,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "spi-bus", - .devname = "s3c64xx-spi.1", + .devname = "s3c6410-spi.1", .ctrlbit = S3C_CLKCON_SCLK_SPI1, .enable = s3c64xx_sclk_ctrl, }, @@ -858,10 +858,10 @@ static struct clk_lookup s3c64xx_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1), + CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), + CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), }; #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 4cb2f951f1e..4c3c9994fc2 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -13,9 +13,7 @@ #include <linux/gpio.h> -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) -#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) +#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START #define PCA935X_GPIO_BASE GPIO_BOARD_START #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4..57b1ff4b2d7 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -21,6 +21,7 @@ */ enum dma_ch { /* DMA0/SDMA0 */ + DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_UART0 = 0, DMACH_UART0_SRC2, DMACH_UART1, diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index fcf3dcabb69..c0537f40a3d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -12,6 +12,9 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_S3C64XX_PM_CORE_H +#define __MACH_S3C64XX_PM_CORE_H __FILE__ + #include <mach/regs-gpio.h> static inline void s3c_pm_debug_init_uart(void) @@ -113,3 +116,4 @@ static inline void samsung_pm_saved_gpios(void) __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); } +#endif /* __MACH_S3C64XX_PM_CORE_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h deleted file mode 100644 index 9d0c43b4b68..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C64XX_PLAT_SPI_CLKS_H -#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ - -#define S3C64XX_SPI_SRCCLK_PCLK 0 -#define S3C64XX_SPI_SRCCLK_SPIBUS 1 -#define S3C64XX_SPI_SRCCLK_48M 2 - -#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 7a27f5603c7..9e382e7c77c 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -29,7 +29,6 @@ #include <mach/crag6410.h> static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { - .set_level = gpio_set_value, .line = S3C64XX_GPC(3), }; @@ -39,6 +38,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, + .irq = S3C_EINT(5), .controller_data = &wm0010_spi_csinfo, }, }; @@ -168,7 +168,6 @@ static struct wm8994_pdata wm8994_pdata = { .gpio_defaults = { 0x3, /* IRQ out, active high, CMOS */ }, - .irq_base = CODEC_IRQ_BASE, .ldo = { { .init_data = &wm8994_ldo1, }, { .init_data = &wm8994_ldo2, }, @@ -182,6 +181,11 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; +static const struct i2c_board_info wm5102_devs[] = { + { I2C_BOARD_INFO("wm5102", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, +}; + static const struct i2c_board_info wm6230_i2c_devs[] = { { I2C_BOARD_INFO("wm9081", 0x6c), .platform_data = &wm9081_pdata, }, @@ -209,6 +213,7 @@ static __devinitdata const struct { .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, { .id = 0x33, .name = "XXXX-EV1 Oban" }, + { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -218,6 +223,8 @@ static __devinitdata const struct { { .id = 0x3c, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, + { .id = 0x3e, .name = "WM5102-6271-EV1-CS127", + .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d0c352d861f..09cd81207a3 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -171,7 +171,7 @@ static struct fb_videomode crag6410_lcd_timing = { }; /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ -static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = { +static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, .vtiming = &crag6410_lcd_timing, .win[0] = &crag6410_fb_win0, @@ -181,7 +181,7 @@ static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = { /* 2x6 keypad */ -static uint32_t crag6410_keymap[] __initdata = { +static uint32_t crag6410_keymap[] __devinitdata = { /* KEY(row, col, keycode) */ KEY(0, 0, KEY_VOLUMEUP), KEY(0, 1, KEY_HOME), @@ -197,12 +197,12 @@ static uint32_t crag6410_keymap[] __initdata = { KEY(1, 5, KEY_CAMERA), }; -static struct matrix_keymap_data crag6410_keymap_data __initdata = { +static struct matrix_keymap_data crag6410_keymap_data __devinitdata = { .keymap = crag6410_keymap, .keymap_size = ARRAY_SIZE(crag6410_keymap), }; -static struct samsung_keypad_platdata crag6410_keypad_data __initdata = { +static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = { .keymap_data = &crag6410_keymap_data, .rows = 2, .cols = 6, @@ -373,11 +373,11 @@ static struct wm831x_buckv_pdata vddarm_pdata = { .dvs_gpio = S3C64XX_GPK(0), }; -static struct regulator_consumer_supply vddarm_consumers[] __initdata = { +static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = { REGULATOR_SUPPLY("vddarm", NULL), }; -static struct regulator_init_data vddarm __initdata = { +static struct regulator_init_data vddarm __devinitdata = { .constraints = { .name = "VDDARM", .min_uV = 1000000, @@ -391,11 +391,11 @@ static struct regulator_init_data vddarm __initdata = { .driver_data = &vddarm_pdata, }; -static struct regulator_consumer_supply vddint_consumers[] __initdata = { +static struct regulator_consumer_supply vddint_consumers[] __devinitdata = { REGULATOR_SUPPLY("vddint", NULL), }; -static struct regulator_init_data vddint __initdata = { +static struct regulator_init_data vddint __devinitdata = { .constraints = { .name = "VDDINT", .min_uV = 1000000, @@ -408,27 +408,27 @@ static struct regulator_init_data vddint __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddmem __initdata = { +static struct regulator_init_data vddmem __devinitdata = { .constraints = { .name = "VDDMEM", .always_on = 1, }, }; -static struct regulator_init_data vddsys __initdata = { +static struct regulator_init_data vddsys __devinitdata = { .constraints = { .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS", .always_on = 1, }, }; -static struct regulator_consumer_supply vddmmc_consumers[] __initdata = { +static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = { REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"), REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), }; -static struct regulator_init_data vddmmc __initdata = { +static struct regulator_init_data vddmmc __devinitdata = { .constraints = { .name = "VDDMMC,UH", .always_on = 1, @@ -438,7 +438,7 @@ static struct regulator_init_data vddmmc __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddotgi __initdata = { +static struct regulator_init_data vddotgi __devinitdata = { .constraints = { .name = "VDDOTGi", .always_on = 1, @@ -446,7 +446,7 @@ static struct regulator_init_data vddotgi __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddotg __initdata = { +static struct regulator_init_data vddotg __devinitdata = { .constraints = { .name = "VDDOTG", .always_on = 1, @@ -454,7 +454,7 @@ static struct regulator_init_data vddotg __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddhi __initdata = { +static struct regulator_init_data vddhi __devinitdata = { .constraints = { .name = "VDDHI", .always_on = 1, @@ -462,7 +462,7 @@ static struct regulator_init_data vddhi __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddadc __initdata = { +static struct regulator_init_data vddadc __devinitdata = { .constraints = { .name = "VDDADC,VDDDAC", .always_on = 1, @@ -470,7 +470,7 @@ static struct regulator_init_data vddadc __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddmem0 __initdata = { +static struct regulator_init_data vddmem0 __devinitdata = { .constraints = { .name = "VDDMEM0", .always_on = 1, @@ -478,7 +478,7 @@ static struct regulator_init_data vddmem0 __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddpll __initdata = { +static struct regulator_init_data vddpll __devinitdata = { .constraints = { .name = "VDDPLL", .always_on = 1, @@ -486,7 +486,7 @@ static struct regulator_init_data vddpll __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddlcd __initdata = { +static struct regulator_init_data vddlcd __devinitdata = { .constraints = { .name = "VDDLCD", .always_on = 1, @@ -494,7 +494,7 @@ static struct regulator_init_data vddlcd __initdata = { .supply_regulator = "WALLVDD", }; -static struct regulator_init_data vddalive __initdata = { +static struct regulator_init_data vddalive __devinitdata = { .constraints = { .name = "VDDALIVE", .always_on = 1, @@ -502,30 +502,29 @@ static struct regulator_init_data vddalive __initdata = { .supply_regulator = "WALLVDD", }; -static struct wm831x_backup_pdata banff_backup_pdata __initdata = { +static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = { .charger_enable = 1, .vlim = 2500, /* mV */ .ilim = 200, /* uA */ }; -static struct wm831x_status_pdata banff_red_led __initdata = { +static struct wm831x_status_pdata banff_red_led __devinitdata = { .name = "banff:red:", .default_src = WM831X_STATUS_MANUAL, }; -static struct wm831x_status_pdata banff_green_led __initdata = { +static struct wm831x_status_pdata banff_green_led __devinitdata = { .name = "banff:green:", .default_src = WM831X_STATUS_MANUAL, }; -static struct wm831x_touch_pdata touch_pdata __initdata = { +static struct wm831x_touch_pdata touch_pdata __devinitdata = { .data_irq = S3C_EINT(26), .pd_irq = S3C_EINT(27), }; -static struct wm831x_pdata crag_pmic_pdata __initdata = { +static struct wm831x_pdata crag_pmic_pdata __devinitdata = { .wm831x_num = 1, - .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = BANFF_PMIC_GPIO_BASE, .soft_shutdown = true, @@ -568,7 +567,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .touch = &touch_pdata, }; -static struct i2c_board_info i2c_devs0[] __initdata = { +static struct i2c_board_info i2c_devs0[] __devinitdata = { { I2C_BOARD_INFO("24c08", 0x50), }, { I2C_BOARD_INFO("tca6408", 0x20), .platform_data = &crag6410_pca_data, @@ -583,12 +582,12 @@ static struct s3c2410_platform_i2c i2c0_pdata = { .frequency = 400000, }; -static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = { +static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = { REGULATOR_SUPPLY("DCVDD", "spi0.0"), REGULATOR_SUPPLY("AVDD", "spi0.0"), }; -static struct regulator_init_data pvdd_1v2 __initdata = { +static struct regulator_init_data pvdd_1v2 __devinitdata = { .constraints = { .name = "PVDD_1V2", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -598,7 +597,7 @@ static struct regulator_init_data pvdd_1v2 __initdata = { .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers), }; -static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { +static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = { REGULATOR_SUPPLY("LDOVDD", "1-001a"), REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), @@ -612,7 +611,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("DBVDD", "spi0.0"), }; -static struct regulator_init_data pvdd_1v8 __initdata = { +static struct regulator_init_data pvdd_1v8 __devinitdata = { .constraints = { .name = "PVDD_1V8", .always_on = 1, @@ -622,12 +621,12 @@ static struct regulator_init_data pvdd_1v8 __initdata = { .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers), }; -static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = { +static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = { REGULATOR_SUPPLY("MICVDD", "1-001a"), REGULATOR_SUPPLY("AVDD1", "1-001a"), }; -static struct regulator_init_data pvdd_3v3 __initdata = { +static struct regulator_init_data pvdd_3v3 __devinitdata = { .constraints = { .name = "PVDD_3V3", .always_on = 1, @@ -637,7 +636,7 @@ static struct regulator_init_data pvdd_3v3 __initdata = { .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers), }; -static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { +static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = { .wm831x_num = 2, .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, @@ -669,7 +668,7 @@ static struct wm1250_ev1_pdata wm1250_ev1_pdata = { }, }; -static struct i2c_board_info i2c_devs1[] __initdata = { +static struct i2c_board_info i2c_devs1[] __devinitdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, @@ -799,7 +798,7 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); - s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); + s3c64xx_spi0_set_platdata(NULL, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index df3103d450e..0fe4f1503f4 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = { static struct wm831x_pdata smdk6410_wm1192_pdata = { .pre_init = wm1192_pre_init, - .irq_base = IRQ_BOARD_START, .backlight = &wm1192_backlight_pdata, .dcdc = { diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c index d9592ad7a82..4dc53450d71 100644 --- a/arch/arm/mach-s3c64xx/setup-spi.c +++ b/arch/arm/mach-s3c64xx/setup-spi.c @@ -9,19 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -30,13 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index ee1e8e7f563..000445596ec 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -227,13 +227,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), @@ -467,7 +467,7 @@ static struct clksrc_clk clk_sclk_uclk = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -479,7 +479,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -519,8 +519,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index dae6a13f43b..f3e0ef3d27c 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -236,13 +236,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), @@ -528,7 +528,7 @@ static struct clksrc_clk clk_sclk_uclk = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5p64x0-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -540,7 +540,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5p64x0-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -562,8 +562,8 @@ static struct clk_lookup s5p6450_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 2ee5dc069b3..9c4ce085f58 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -36,8 +36,6 @@ #include <plat/devs.h> #include <plat/irqs.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 s5p6440_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h deleted file mode 100644 index 170a20a9643..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -#define S5P64X0_SPI_SRCCLK_PCLK 0 -#define S5P64X0_SPI_SRCCLK_SCLK 1 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c index e9b84124035..7664356720c 100644 --- a/arch/arm/mach-s5p64x0/setup-spi.c +++ b/arch/arm/mach-s5p64x0/setup-spi.c @@ -9,21 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/io.h> - #include <plat/gpio-cfg.h> -#include <plat/cpu.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { if (soc_is_s5p6450()) s3c_gpio_cfgall_range(S5P6450_GPC(0), 3, @@ -36,13 +25,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { if (soc_is_s5p6450()) s3c_gpio_cfgall_range(S5P6450_GPC(4), 3, diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 16eca4ea201..926219791f0 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -564,19 +564,19 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 5), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 6), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 7), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 8), @@ -702,7 +702,7 @@ static struct clk clk_hsmmc0 = { static struct clk clk_48m_spi0 = { .name = "spi_48m", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 7), @@ -710,7 +710,7 @@ static struct clk clk_48m_spi0 = { static struct clk clk_48m_spi1 = { .name = "spi_48m", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 8), @@ -718,7 +718,7 @@ static struct clk clk_48m_spi1 = { static struct clk clk_48m_spi2 = { .name = "spi_48m", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 9), @@ -1085,7 +1085,7 @@ static struct clksrc_clk clk_sclk_mmc2 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pc100-spi.0", .ctrlbit = (1 << 4), .enable = s5pc100_sclk0_ctrl, }, @@ -1097,7 +1097,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pc100-spi.1", .ctrlbit = (1 << 5), .enable = s5pc100_sclk0_ctrl, }, @@ -1109,7 +1109,7 @@ static struct clksrc_clk clk_sclk_spi1 = { static struct clksrc_clk clk_sclk_spi2 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pc100-spi.2", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, }, @@ -1315,12 +1315,12 @@ static struct clk_lookup s5pc100_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0), + CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1), + CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2), + CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), }; void __init s5pc100_register_clocks(void) diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index afd8db2d599..b1418409709 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -33,8 +33,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h deleted file mode 100644 index 65e426370bb..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PC100_PLAT_SPI_CLKS_H -#define __S5PC100_PLAT_SPI_CLKS_H __FILE__ - -#define S5PC100_SPI_SRCCLK_PCLK 0 -#define S5PC100_SPI_SRCCLK_48M 1 -#define S5PC100_SPI_SRCCLK_SPIBUS 2 - -#endif /* __S5PC100_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c index 431a6f747ca..183567961de 100644 --- a/arch/arm/mach-s5pc100/setup-spi.c +++ b/arch/arm/mach-s5pc100/setup-spi.c @@ -9,20 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -31,14 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); @@ -47,14 +30,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI2 -struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi2_cfg_gpio(void) { s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 88e983b0c82..77185c38188 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -152,6 +152,7 @@ config MACH_SMDKV210 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -170,6 +171,7 @@ config MACH_SMDKV210 select S5PV210_SETUP_IDE select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY help Machine support for Samsung SMDKV210 diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 09609d50961..fcdf52dbcc4 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -445,19 +445,19 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 11), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pv210-spi.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<12), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pv210-spi.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<13), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "s5pv210-spi.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<14), @@ -1035,7 +1035,7 @@ static struct clksrc_clk clk_sclk_mmc3 = { static struct clksrc_clk clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "s5pv210-spi.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 16), }, @@ -1047,7 +1047,7 @@ static struct clksrc_clk clk_sclk_spi0 = { static struct clksrc_clk clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "s5pv210-spi.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 17), }, @@ -1331,8 +1331,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), }; void __init s5pv210_register_clocks(void) diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h deleted file mode 100644 index 02acded5f73..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PV210_PLAT_SPI_CLKS_H -#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ - -#define S5PV210_SPI_SRCCLK_PCLK 0 -#define S5PV210_SPI_SRCCLK_SCLK 1 - -#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index af528f9e97f..78028df86c5 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void) s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); }; +/* Audio device */ +static struct platform_device aquila_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, &aquila_i2c_gpio5, &aquila_device_gpiokeys, + &aquila_device_audio, &s3c_device_fb, &s5p_device_onenand, &s3c_device_hsmmc0, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index bf5087c2b7f..822a5595068 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { .num_clients = ARRAY_SIZE(goni_camera_sensors), }; +/* Audio device */ +static struct platform_device goni_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, &goni_spi_gpio, &goni_i2c_gpio_pmic, &goni_i2c_gpio5, + &goni_device_audio, &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_mfc, @@ -901,7 +908,7 @@ static void __init goni_sound_init(void) static void __init goni_map_io(void) { s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } @@ -959,8 +966,6 @@ static void __init goni_machine_init(void) /* KEYPAD */ samsung_keypad_set_platdata(&keypad_data); - clk_xusbxti.rate = 24000000; - platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0d7ddec88eb..918b23d71fd 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/hardware/vic.h> #include <asm/mach/arch.h> @@ -47,6 +48,7 @@ #include <plat/backlight.h> #include <plat/regs-fb-v4.h> #include <plat/mfc.h> +#include <plat/clock.h> #include "common.h" @@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +/* USB OTG */ +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; + static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_ts, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, @@ -279,7 +285,7 @@ static struct platform_pwm_backlight_data smdkv210_bl_data = { static void __init smdkv210_map_io(void) { s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } @@ -314,6 +320,8 @@ static void __init smdkv210_machine_init(void) samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c index f43c5048a37..81aecc162f8 100644 --- a/arch/arm/mach-s5pv210/setup-spi.c +++ b/arch/arm/mach-s5pv210/setup-spi.c @@ -9,20 +9,10 @@ */ #include <linux/gpio.h> -#include <linux/platform_device.h> - #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); @@ -33,14 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d1dc7f1a239..d673211f121 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -362,7 +362,7 @@ static void __init assabet_init(void) static void __init map_sa1100_gpio_regs( void ) { unsigned long phys = __PREG(GPLR) & PMD_MASK; - unsigned long virt = io_p2v(phys); + unsigned long virt = (unsigned long)io_p2v(phys); int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO); pmd_t *pmd; diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 19b2053f5af..e8f4d1e1923 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -87,6 +87,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/io.h> #include <asm/cputype.h> diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 675bf8ef97e..48c45b0c92b 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -19,6 +19,7 @@ #include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/moduleparam.h> #include <linux/types.h> diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 3f2d1b60188..0ac6cc08a19 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -830,14 +830,14 @@ * (read/write). */ -#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */ -#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */ -#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */ -#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */ -#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */ -#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */ -#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */ -#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */ +#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */ +#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */ +#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */ +#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */ +#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */ +#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */ +#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */ +#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */ #define OSSR_M(Nb) /* Match detected [0..3] */ \ (0x00000001 << (Nb)) diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index a38fc4f5424..6a9eecf3137 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -24,6 +24,7 @@ #ifndef __ASM_ARCH_SA1100_GPIO_H #define __ASM_ARCH_SA1100_GPIO_H +#include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 99f5856d8de..cbedd75a9d6 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -32,7 +32,7 @@ #define PIO_START 0x80000000 /* physical start of IO space */ #define io_p2v( x ) \ - ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) + IOMEM( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) #define io_v2p( x ) \ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START ) @@ -47,6 +47,8 @@ #define CPU_SA1110_ID (0x6901b110) #define CPU_SA1110_MASK (0xfffffff0) +#define __MREG(x) IOMEM(io_p2v(x)) + #ifndef __ASSEMBLY__ #include <asm/cputype.h> @@ -56,7 +58,7 @@ #define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID) #define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID) -# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x))) # define __PREG(x) (io_v2p((unsigned long)&(x))) static inline unsigned long get_clock_tick_rate(void) diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 6cb39ddde65..5cf71da60e4 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -8,6 +8,8 @@ #include "hardware.h" +#define IOMEM(x) (x) + /* * The following code assumes the serial port has already been * initialized by the bootloader. We search for the first enabled diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 516ccc25d7f..2124f1fc2fb 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/ioport.h> #include <linux/syscore_ops.h> diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index b412fc09c80..7f07f08d896 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/io.h> #include <mach/hardware.h> #include <mach/jornada720.h> diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 040540fb7d8..30fc3b2bf55 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -4,6 +4,7 @@ * Author: ??? */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c index a51830c60e5..50a5b143b46 100644 --- a/arch/arm/mach-sa1100/leds-lart.c +++ b/arch/arm/mach-sa1100/leds-lart.c @@ -10,6 +10,7 @@ * pace of the LED. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 690cf0ce5c0..6645d1e31f1 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -23,6 +23,7 @@ * Storage is local on the stack now. */ #include <linux/init.h> +#include <linux/io.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 30cc6721665..85863741ef8 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -38,9 +38,9 @@ ENTRY(sa1100_finish_suspend) orr r4, r4, #MDREFR_K1DB2 ldr r5, =PPCR - @ Pre-load __udelay into the I-cache + @ Pre-load __loop_udelay into the I-cache mov r0, #1 - bl __udelay + bl __loop_udelay mov r0, r0 @ The following must all exist in a single cache line to @@ -53,11 +53,11 @@ ENTRY(sa1100_finish_suspend) @ delay 90us and set CPU PLL to lowest speed @ fixes resume problem on high speed SA1110 mov r0, #90 - bl __udelay + bl __loop_udelay mov r1, #0 str r1, [r5] mov r0, #90 - bl __udelay + bl __loop_udelay /* * SA1110 SDRAM controller workaround. register values: diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 6af26e8d55e..80702c9ecc7 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -22,7 +22,7 @@ static u32 notrace sa1100_read_sched_clock(void) { - return OSCR; + return readl_relaxed(OSCR); } #define MIN_OSCR_DELTA 2 @@ -32,8 +32,8 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) struct clock_event_device *c = dev_id; /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); c->event_handler(c); return IRQ_HANDLED; @@ -44,10 +44,10 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) { unsigned long next, oscr; - OIER |= OIER_E0; - next = OSCR + delta; - OSMR0 = next; - oscr = OSCR; + writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); + next = readl_relaxed(OSCR) + delta; + writel_relaxed(next, OSMR0); + oscr = readl_relaxed(OSCR); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -59,8 +59,8 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) case CLOCK_EVT_MODE_ONESHOT: case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_RESUME: @@ -86,8 +86,8 @@ static struct irqaction sa1100_timer_irq = { static void __init sa1100_timer_init(void) { - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); @@ -100,7 +100,7 @@ static void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); clockevents_register_device(&ckevt_sa1100_osmr0); } @@ -110,26 +110,26 @@ unsigned long osmr[4], oier; static void sa1100_timer_suspend(void) { - osmr[0] = OSMR0; - osmr[1] = OSMR1; - osmr[2] = OSMR2; - osmr[3] = OSMR3; - oier = OIER; + osmr[0] = readl_relaxed(OSMR0); + osmr[1] = readl_relaxed(OSMR1); + osmr[2] = readl_relaxed(OSMR2); + osmr[3] = readl_relaxed(OSMR3); + oier = readl_relaxed(OIER); } static void sa1100_timer_resume(void) { - OSSR = 0x0f; - OSMR0 = osmr[0]; - OSMR1 = osmr[1]; - OSMR2 = osmr[2]; - OSMR3 = osmr[3]; - OIER = oier; + writel_relaxed(0x0f, OSSR); + writel_relaxed(osmr[0], OSMR0); + writel_relaxed(osmr[1], OSMR1); + writel_relaxed(osmr[2], OSMR2); + writel_relaxed(osmr[3], OSMR3); + writel_relaxed(oier, OIER); /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - OSCR = OSMR0 - LATCH; + writel_relaxed(OSMR0 - LATCH, OSCR); } #else #define sa1100_timer_suspend NULL diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index df33909205e..4cacc2d22fb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -19,6 +19,7 @@ config ARCH_SH7372 select CPU_V7 select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_CPU_SUSPEND if PM || CPU_IDLE config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" @@ -58,6 +59,7 @@ config MACH_G4EVM bool "G4EVM board" depends on ARCH_SH7377 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_AP4EVB bool "AP4EVB board" @@ -65,6 +67,7 @@ config MACH_AP4EVB select ARCH_REQUIRE_GPIOLIB select SH_LCD_MIPI_DSI select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR choice prompt "AP4EVB LCD panel selection" @@ -83,6 +86,7 @@ config MACH_AG5EVM bool "AG5EVM board" select ARCH_REQUIRE_GPIOLIB select SH_LCD_MIPI_DSI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_SH73A0 config MACH_MACKEREL @@ -90,15 +94,18 @@ config MACH_MACKEREL depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KOTA2 bool "KOTA2 board" select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_SH73A0 config MACH_BONITO bool "bonito board" select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_R8A7740 config MACH_ARMADILLO800EVA @@ -106,22 +113,28 @@ config MACH_ARMADILLO800EVA depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB select USE_OF + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_WM8978 if SND_SIMPLE_CARD config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 select USE_OF + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 select ARCH_REQUIRE_GPIOLIB select USE_OF + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR comment "SH-Mobile System Configuration" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 8aa1962c22a..0df5ae6740c 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -39,7 +39,9 @@ obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_SHMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o +obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 5a6f22f05e9..d82c010fdfc 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -27,6 +27,8 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> @@ -52,6 +54,12 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc9220_resources[] = { [0] = { .start = 0x14000000, @@ -142,6 +150,13 @@ static struct platform_device fsi_device = { .resource = fsi_resources, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + static struct resource sh_mmcif_resources[] = { [0] = { .name = "MMCIF", @@ -364,6 +379,13 @@ static struct platform_device mipidsi0_device = { }, }; +/* Fixed 2.8V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, @@ -408,8 +430,57 @@ static struct platform_device sdhi0_device = { }, }; -void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply cn4_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn4_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers), + .consumer_supplies = cn4_power_consumers, +}; + +static struct fixed_voltage_config cn4_power_info = { + .supply_name = "CN4 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PORT114, + .enable_high = 1, + .init_data = &cn4_power_init_data, +}; + +static struct platform_device cn4_power = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &cn4_power_info, + }, +}; + +static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PORT114, "sdhi1_power"); + if (!ret) { + power_gpio = GPIO_PORT114; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * If requesting the GPIO above failed, it means, that the regulator got + * probed and grabbed the GPIO, but we don't know, whether the sdhi + * driver already uses the regulator. If it doesn't, we have to toggle + * the GPIO ourselves, even though it is now owned by the fixed + * regulator driver. We have to live with the race in case the driver + * gets unloaded and the GPIO freed between these two steps. + */ gpio_set_value(GPIO_PORT114, state); } @@ -455,6 +526,7 @@ static struct platform_device sdhi1_device = { }; static struct platform_device *ag5evm_devices[] __initdata = { + &cn4_power, ð_device, &keysc_device, &fsi_device, @@ -468,6 +540,12 @@ static struct platform_device *ag5evm_devices[] __initdata = { static void __init ag5evm_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 3300000); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* enable SCIFA2 */ @@ -562,8 +640,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID1_2_PU, NULL); gpio_request(GPIO_FN_SDHID1_1_PU, NULL); gpio_request(GPIO_FN_SDHID1_0_PU, NULL); - gpio_request(GPIO_PORT114, "sdhi1_power"); - gpio_direction_output(GPIO_PORT114, 0); #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index ace60246a5d..f172ca85905 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -34,6 +34,8 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/sh_clk.h> @@ -159,6 +161,27 @@ * CN12: 3.3v */ +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + /* J22 default position: 1.8V */ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* MTD */ static struct mtd_partition nor_flash_partitions[] = { { @@ -1138,21 +1161,6 @@ static void __init fsi_init_pm_clock(void) clk_put(fsia_ick); } -/* - * FIXME !! - * - * gpio_no_direction - * are quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_no_direction(u32 addr) -{ - __raw_writeb(0x00, addr); -} - /* TouchScreen */ #ifdef CONFIG_AP4EVB_QHD # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 @@ -1224,6 +1232,12 @@ static void __init ap4evb_init(void) u32 srcr4; struct clk *clk; + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1302,8 +1316,8 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); - gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ /* card detect pin for MMC slot (CN7) */ gpio_request(GPIO_PORT41, NULL); @@ -1447,14 +1461,14 @@ static void __init ap4evb_init(void) platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device); hdmi_init_pm_clock(); fsi_init_pm_clock(); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9bd135531d7..cf10f92856d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> #include <linux/usb/renesas_usbhs.h> @@ -37,14 +39,20 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <mach/common.h> #include <mach/irqs.h> +#include <mach/r8a7740.h> +#include <media/mt9t112.h> +#include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/r8a7740.h> #include <video/sh_mobile_lcdc.h> +#include <video/sh_mobile_hdmi.h> +#include <sound/sh_fsi.h> +#include <sound/simple_card.h> /* * CON1 Camera Module @@ -108,6 +116,14 @@ */ /* + * FSI-WM8978 + * + * this command is required when playback. + * + * # amixer set "Headphone" 50 + */ + +/* * USB function * * When you use USB Function, @@ -117,14 +133,8 @@ * These are a little bit complex. * see * usbhsf_power_ctrl() - * - * CAUTION - * - * It uses autonomy mode for USB hotplug at this point - * (= usbhs_private.platform_callback.get_vbus is NULL), - * since we don't know what's happen on PM control - * on this workaround. */ +#define IRQ7 evt2irq(0x02e0) #define USBCR1 0xe605810a #define USBH 0xC6700000 #define USBH_USBCTR 0x10834 @@ -204,6 +214,20 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, } } +static int usbhsf_get_vbus(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PORT209); +} + +static irqreturn_t usbhsf_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + + renesas_usbhs_call_notify_hotplug(pdev); + + return IRQ_HANDLED; +} + static void usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -227,11 +251,14 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->host = NULL; priv->func = NULL; priv->usbh_base = NULL; + + free_irq(IRQ7, pdev); } static int usbhsf_hardware_init(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); + int ret; priv->phy = clk_get(&pdev->dev, "phy"); priv->usb24 = clk_get(&pdev->dev, "usb24"); @@ -251,6 +278,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev) return -EIO; } + ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); + /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ clk_set_rate(priv->usb24, clk_get_rate(clk_get_parent(priv->usb24))); @@ -262,6 +297,7 @@ static struct usbhsf_private usbhsf_private = { .info = { .platform_callback = { .get_id = usbhsf_get_id, + .get_vbus = usbhsf_get_vbus, .hardware_init = usbhsf_hardware_init, .hardware_exit = usbhsf_hardware_exit, .power_ctrl = usbhsf_power_ctrl, @@ -269,6 +305,8 @@ static struct usbhsf_private usbhsf_private = { .driver_param = { .buswait_bwait = 5, .detection_delay = 5, + .d0_rx_id = SHDMA_SLAVE_USBHS_RX, + .d1_tx_id = SHDMA_SLAVE_USBHS_TX, }, } }; @@ -384,6 +422,103 @@ static struct platform_device lcdc0_device = { }, }; +/* + * LCDC1/HDMI + */ +static struct sh_mobile_hdmi_info hdmi_info = { + .flags = HDMI_OUTPUT_PUSH_PULL | + HDMI_OUTPUT_POLARITY_HI | + HDMI_32BIT_REG | + HDMI_HAS_HTOP1 | + HDMI_SND_SRC_SPDIF, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be03ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1700), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "HDMI emma3pf", + .start = 0xe6be4000, + .end = 0xe6be43ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + +static const struct fb_videomode lcdc1_mode = { + .name = "HDMI 720p", + .xres = 1280, + .yres = 720, + .pixclock = 13468, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .refresh = 60, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +}; + +static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */ + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_modes = &lcdc1_mode, + .num_modes = 1, + .tx_dev = &hdmi_device, + .panel_cfg = { + .width = 1280, + .height = 720, + }, + }, +}; + +static struct resource hdmi_lcdc_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe948000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x1780), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), + .resource = hdmi_lcdc_resources, + .id = 1, + .dev = { + .platform_data = &hdmi_lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + /* GPIO KEY */ #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } @@ -407,6 +542,17 @@ static struct platform_device gpio_keys_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + /* SDHI0 */ /* * FIXME @@ -418,6 +564,8 @@ static struct platform_device gpio_keys_device = { */ #define IRQ31 evt2irq(0x33E0) static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ MMC_CAP_NEEDS_POLL, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -458,6 +606,8 @@ static struct platform_device sdhi0_device = { /* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, @@ -532,12 +682,209 @@ static struct platform_device sh_mmcif_device = { .resource = sh_mmcif_resources, }; +/* Camera */ +static int mt9t111_power(struct device *dev, int mode) +{ + struct clk *mclk = clk_get(NULL, "video1"); + + if (IS_ERR(mclk)) { + dev_err(dev, "can't get video1 clock\n"); + return -EINVAL; + } + + if (mode) { + /* video1 (= CON1 camera) expect 24MHz */ + clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); + clk_enable(mclk); + gpio_direction_output(GPIO_PORT158, 1); + } else { + gpio_direction_output(GPIO_PORT158, 0); + clk_disable(mclk); + } + + clk_put(mclk); + + return 0; +} + +static struct i2c_board_info i2c_camera_mt9t111 = { + I2C_BOARD_INFO("mt9t112", 0x3d), +}; + +static struct mt9t112_camera_info mt9t111_info = { + .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 }, +}; + +static struct soc_camera_link mt9t111_link = { + .i2c_adapter_id = 0, + .bus_id = 0, + .board_info = &i2c_camera_mt9t111, + .power = mt9t111_power, + .priv = &mt9t111_info, +}; + +static struct platform_device camera_device = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &mt9t111_link, + }, +}; + +/* CEU0 */ +static struct sh_mobile_ceu_info sh_mobile_ceu0_info = { + .flags = SH_CEU_FLAG_LOWER_8BIT, +}; + +static struct resource ceu0_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x0500), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu0_device = { + .name = "sh_mobile_ceu", + .id = 0, + .num_resources = ARRAY_SIZE(ceu0_resources), + .resource = ceu0_resources, + .dev = { + .platform_data = &sh_mobile_ceu0_info, + .coherent_dma_mask = 0xffffffff, + }, +}; + +/* FSI */ +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsib; + int ret; + + /* it support 48KHz only */ + if (48000 != rate) + return -EINVAL; + + fsib = clk_get(dev, "ickb"); + if (IS_ERR(fsib)) + return -EINVAL; + + if (enable) { + ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + clk_enable(fsib); + } else { + ret = 0; + clk_disable(fsib); + } + + clk_put(fsib); + + return ret; +} + +static struct sh_fsi_platform_info fsi_info = { + /* FSI-WM8978 */ + .port_a = { + .tx_id = SHDMA_SLAVE_FSIA_TX, + }, + /* FSI-HDMI */ + .port_b = { + .flags = SH_FSI_FMT_SPDIF | + SH_FSI_ENABLE_STREAM_MODE, + .set_rate = fsi_hdmi_set_rate, + .tx_id = SHDMA_SLAVE_FSIB_TX, + } +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xfe1f0000, + .end = 0xfe1f8400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1840), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +/* FSI-WM8978 */ +static struct asoc_simple_dai_init_info fsi_wm8978_init_info = { + .fmt = SND_SOC_DAIFMT_I2S, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, + .sysclk = 12288000, +}; + +static struct asoc_simple_card_info fsi_wm8978_info = { + .name = "wm8978", + .card = "FSI2A-WM8978", + .cpu_dai = "fsia-dai", + .codec = "wm8978.0-001a", + .platform = "sh_fsi2", + .codec_dai = "wm8978-hifi", + .init = &fsi_wm8978_init_info, +}; + +static struct platform_device fsi_wm8978_device = { + .name = "asoc-simple-card", + .id = 0, + .dev = { + .platform_data = &fsi_wm8978_info, + }, +}; + +/* FSI-HDMI */ +static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { + .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, +}; + +static struct asoc_simple_card_info fsi2_hdmi_info = { + .name = "HDMI", + .card = "FSI2B-HDMI", + .cpu_dai = "fsib-dai", + .codec = "sh-mobile-hdmi", + .platform = "sh_fsi2", + .codec_dai = "sh_mobile_hdmi-hifi", + .init = &fsi2_hdmi_init_info, +}; + +static struct platform_device fsi_hdmi_device = { + .name = "asoc-simple-card", + .id = 1, + .dev = { + .platform_data = &fsi2_hdmi_info, + }, +}; + /* I2C */ static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), .irq = evt2irq(0x0340), }, + { + I2C_BOARD_INFO("wm8978", 0x1a), + }, }; /* @@ -549,6 +896,13 @@ static struct platform_device *eva_devices[] __initdata = { &sh_eth_device, &sdhi0_device, &sh_mmcif_device, + &hdmi_device, + &hdmi_lcdc_device, + &camera_device, + &ceu0_device, + &fsi_device, + &fsi_hdmi_device, + &fsi_wm8978_device, }; static void __init eva_clock_init(void) @@ -556,10 +910,14 @@ static void __init eva_clock_init(void) struct clk *system = clk_get(NULL, "system_clk"); struct clk *xtal1 = clk_get(NULL, "extal1"); struct clk *usb24s = clk_get(NULL, "usb24s"); + struct clk *fsibck = clk_get(NULL, "fsibck"); + struct clk *fsib = clk_get(&fsi_device.dev, "ickb"); if (IS_ERR(system) || IS_ERR(xtal1) || - IS_ERR(usb24s)) { + IS_ERR(usb24s) || + IS_ERR(fsibck) || + IS_ERR(fsib)) { pr_err("armadillo800eva board clock init failed\n"); goto clock_error; } @@ -570,6 +928,11 @@ static void __init eva_clock_init(void) /* usb24s use extal1 (= system) clock (= 24MHz) */ clk_set_parent(usb24s, system); + /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ + clk_set_parent(fsib, fsibck); + clk_set_rate(fsibck, 12288000); + clk_set_rate(fsib, 12288000); + clock_error: if (!IS_ERR(system)) clk_put(system); @@ -577,16 +940,26 @@ clock_error: clk_put(xtal1); if (!IS_ERR(usb24s)) clk_put(usb24s); + if (!IS_ERR(fsibck)) + clk_put(fsibck); + if (!IS_ERR(fsib)) + clk_put(fsib); } /* * board init */ +#define GPIO_PORT7CR 0xe6050007 +#define GPIO_PORT8CR 0xe6050008 static void __init eva_init(void) { - eva_clock_init(); + struct platform_device *usb = NULL; + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); r8a7740_pinmux_init(); + r8a7740_meram_workaround(); /* SCIFA1 */ gpio_request(GPIO_FN_SCIFA1_RXD, NULL); @@ -667,8 +1040,19 @@ static void __init eva_init(void) /* USB Host */ } else { /* USB Func */ - gpio_request(GPIO_FN_VBUS, NULL); + /* + * A1 chip has 2 IRQ7 pin and it was controled by MSEL register. + * OTOH, usbhs interrupt needs its value (HI/LOW) to decide + * USB connection/disconnection (usbhsf_get_vbus()). + * This means we needs to select GPIO_FN_IRQ7_PORT209 first, + * and select GPIO_PORT209 here + */ + gpio_request(GPIO_FN_IRQ7_PORT209, NULL); + gpio_request(GPIO_PORT209, NULL); + gpio_direction_input(GPIO_PORT209); + platform_device_register(&usbhsf_device); + usb = &usbhsf_device; } /* SDHI0 */ @@ -706,6 +1090,48 @@ static void __init eva_init(void) gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); + /* CEU0 */ + gpio_request(GPIO_FN_VIO0_D7, NULL); + gpio_request(GPIO_FN_VIO0_D6, NULL); + gpio_request(GPIO_FN_VIO0_D5, NULL); + gpio_request(GPIO_FN_VIO0_D4, NULL); + gpio_request(GPIO_FN_VIO0_D3, NULL); + gpio_request(GPIO_FN_VIO0_D2, NULL); + gpio_request(GPIO_FN_VIO0_D1, NULL); + gpio_request(GPIO_FN_VIO0_D0, NULL); + gpio_request(GPIO_FN_VIO0_CLK, NULL); + gpio_request(GPIO_FN_VIO0_HD, NULL); + gpio_request(GPIO_FN_VIO0_VD, NULL); + gpio_request(GPIO_FN_VIO0_FIELD, NULL); + gpio_request(GPIO_FN_VIO_CKO, NULL); + + /* CON1/CON15 Camera */ + gpio_request(GPIO_PORT173, NULL); /* STANDBY */ + gpio_request(GPIO_PORT172, NULL); /* RST */ + gpio_request(GPIO_PORT158, NULL); /* CAM_PON */ + gpio_direction_output(GPIO_PORT173, 0); + gpio_direction_output(GPIO_PORT172, 1); + gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */ + + /* FSI-WM8978 */ + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAOMC, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); + + gpio_request(GPIO_PORT7, NULL); + gpio_request(GPIO_PORT8, NULL); + gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ + + /* FSI-HDMI */ + gpio_request(GPIO_FN_FSIBCK, NULL); + + /* HDMI */ + gpio_request(GPIO_FN_HDMI_HPD, NULL); + gpio_request(GPIO_FN_HDMI_CEC, NULL); + /* * CAUTION * @@ -752,6 +1178,13 @@ static void __init eva_init(void) platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); + + eva_clock_init(); + + rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &lcdc0_device); + rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &hdmi_lcdc_device); + if (usb) + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, usb); } static void __init eva_earlytimer_init(void) diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index e9b32cfbf74..4129008eae2 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -26,6 +26,8 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/videodev2.h> #include <mach/common.h> @@ -75,6 +77,12 @@ * S38.2 = OFF */ +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* * FPGA */ @@ -360,6 +368,8 @@ static void __init bonito_init(void) { u16 val; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + r8a7740_pinmux_init(); bonito_fpga_init(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index f1257321999..fa5dfc5c8ed 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -26,6 +26,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/io.h> #include <linux/input.h> @@ -196,6 +198,15 @@ static struct platform_device keysc_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SDIO_IRQ, @@ -271,26 +282,11 @@ static struct platform_device *g4evm_devices[] __initdata = { #define GPIO_SDHID1_D3 0xe6052106 #define GPIO_SDHICMD1 0xe6052107 -/* - * FIXME !! - * - * gpio_pull_up is quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_pull_up(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xC0; - __raw_writeb(data, addr); -} - static void __init g4evm_init(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + sh7377_pinmux_init(); /* Lit DS14 LED */ @@ -351,11 +347,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID0_3, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_pull_up(GPIO_SDHID0_D0); - gpio_pull_up(GPIO_SDHID0_D1); - gpio_pull_up(GPIO_SDHID0_D2); - gpio_pull_up(GPIO_SDHID0_D3); - gpio_pull_up(GPIO_SDHICMD0); + gpio_request_pullup(GPIO_SDHID0_D0); + gpio_request_pullup(GPIO_SDHID0_D1); + gpio_request_pullup(GPIO_SDHID0_D2); + gpio_request_pullup(GPIO_SDHID0_D3); + gpio_request_pullup(GPIO_SDHICMD0); /* SDHI1 */ gpio_request(GPIO_FN_SDHICLK1, NULL); @@ -364,11 +360,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID1_2, NULL); gpio_request(GPIO_FN_SDHID1_3, NULL); gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_pull_up(GPIO_SDHID1_D0); - gpio_pull_up(GPIO_SDHID1_D1); - gpio_pull_up(GPIO_SDHID1_D2); - gpio_pull_up(GPIO_SDHID1_D3); - gpio_pull_up(GPIO_SDHICMD1); + gpio_request_pullup(GPIO_SDHID1_D0); + gpio_request_pullup(GPIO_SDHID1_D1); + gpio_request_pullup(GPIO_SDHID1_D2); + gpio_request_pullup(GPIO_SDHID1_D3); + gpio_request_pullup(GPIO_SDHICMD1); sh7377_add_standard_devices(); diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index f60f1b281cc..21dbe54304d 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -27,6 +27,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/input.h> @@ -49,6 +51,12 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* SMSC 9220 */ static struct resource smsc9220_resources[] = { [0] = { @@ -288,6 +296,13 @@ static struct platform_device leds_tpu30_device = { .resource = tpu30_resources, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -321,6 +336,15 @@ static struct platform_device mmcif_device = { .resource = mmcif_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SD_HIGHSPEED, @@ -411,6 +435,12 @@ static struct platform_device *kota2_devices[] __initdata = { static void __init kota2_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* SCIFA2 (UART2) */ diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 6a33cf39342..2c986eaae7b 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -21,6 +21,8 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <mach/common.h> #include <mach/emev2.h> @@ -28,6 +30,12 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* Ether */ static struct resource smsc911x_resources[] = { [0] = { @@ -63,6 +71,8 @@ static struct platform_device *kzm9d_devices[] __initdata = { void __init kzm9d_add_standard_devices(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + emev2_add_standard_devices(); platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices)); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index c0ae815e7be..53b7ea92c32 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -30,9 +30,14 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <linux/videodev2.h> +#include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <mach/irqs.h> #include <mach/sh73a0.h> #include <mach/common.h> @@ -54,6 +59,20 @@ #define GPIO_PCF8575_PORT15 (GPIO_NR + 13) #define GPIO_PCF8575_PORT16 (GPIO_NR + 14) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +/* + * FSI-AK4648 + * + * this command is required when playback. + * + * # amixer set "LINEOUT Mixer DACL" on + */ + /* SMSC 9221 */ static struct resource smsc9221_resources[] = { [0] = { @@ -112,6 +131,151 @@ static struct platform_device usb_host_device = { .resource = usb_resources, }; +/* USB Func CN17 */ +struct usbhs_private { + unsigned int phy; + unsigned int cr2; + struct renesas_usbhs_platform_info info; +}; + +#define IRQ15 intcs_evt2irq(0x03e0) +#define USB_PHY_MODE (1 << 4) +#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) +#define USB_PHY_ON (1 << 1) +#define USB_PHY_OFF (1 << 0) +#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + return !((1 << 7) & __raw_readw(priv->cr2)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->cr2); +} + +static int usbhs_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static irqreturn_t usbhs_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + struct usbhs_private *priv = usbhs_get_priv(pdev); + + renesas_usbhs_call_notify_hotplug(pdev); + + /* clear status */ + __raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy); + + return IRQ_HANDLED; +} + +static int usbhs_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + int ret; + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); + + ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + + /* enable USB phy interrupt */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy); + + return 0; +} + +static void usbhs_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); + + free_irq(IRQ15, pdev); +} + +static u32 usbhs_pipe_cfg[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + +static struct usbhs_private usbhs_private = { + .phy = 0xe60781e0, /* USBPHYINT */ + .cr2 = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs_hardware_init, + .hardware_exit = usbhs_hardware_exit, + .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + .has_otg = 1, + .pipe_type = usbhs_pipe_cfg, + .pipe_size = ARRAY_SIZE(usbhs_pipe_cfg), + }, + }, +}; + +static struct resource usbhs_resources[] = { + [0] = { + .start = 0xE6890000, + .end = 0xE68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(62), + .end = gic_spi(62), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs_device = { + .name = "renesas_usbhs", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbhs_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + /* LCDC */ static struct fb_videomode kzm_lcdc_mode = { .name = "WVGA Panel", @@ -166,6 +330,13 @@ static struct platform_device lcdc_device = { }, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -187,6 +358,8 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_platdata = { .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -200,6 +373,15 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; +/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, @@ -240,6 +422,50 @@ static struct platform_device sdhi0_device = { }, }; +/* Micro SD */ +static struct sh_mobile_sdhi_info sdhi2_info = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | + TMIO_MMC_USE_GPIO_CD | + TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = GPIO_PORT13, +}; + +static struct resource sdhi2_resources[] = { + [0] = { + .name = "SDHI2", + .start = 0xee140000, + .end = 0xee1400ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = gic_spi(103), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = gic_spi(104), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = gic_spi(105), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi2_device = { + .name = "sh_mobile_sdhi", + .id = 2, + .num_resources = ARRAY_SIZE(sdhi2_resources), + .resource = sdhi2_resources, + .dev = { + .platform_data = &sdhi2_info, + }, +}; + /* KEY */ #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } @@ -267,11 +493,74 @@ static struct platform_device gpio_keys_device = { }, }; +/* FSI-AK4648 */ +static struct sh_fsi_platform_info fsi_info = { + .port_a = { + .tx_id = SHDMA_SLAVE_FSI2A_TX, + }, +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xEC230000, + .end = 0xEC230400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(146), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = { + .fmt = SND_SOC_DAIFMT_LEFT_J, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, + .sysclk = 11289600, +}; + +static struct asoc_simple_card_info fsi2_ak4648_info = { + .name = "AK4648", + .card = "FSI2A-AK4648", + .cpu_dai = "fsia-dai", + .codec = "ak4642-codec.0-0012", + .platform = "sh_fsi2", + .codec_dai = "ak4642-hifi", + .init = &fsi2_ak4648_init_info, +}; + +static struct platform_device fsi_ak4648_device = { + .name = "asoc-simple-card", + .dev = { + .platform_data = &fsi2_ak4648_info, + }, +}; + /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, }; +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4648", 0x12), + }, + { + I2C_BOARD_INFO("r2025sd", 0x32), + } +}; + static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), @@ -289,10 +578,14 @@ static struct i2c_board_info i2c3_devices[] = { static struct platform_device *kzm_devices[] __initdata = { &smsc_device, &usb_host_device, + &usbhs_device, &lcdc_device, &mmc_device, &sdhi0_device, + &sdhi2_device, &gpio_keys_device, + &fsi_device, + &fsi_ak4648_device, }; /* @@ -350,6 +643,12 @@ device_initcall(as3711_enable_lcdc_backlight); static void __init kzm_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 2800000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* enable SCIFA4 */ @@ -427,15 +726,36 @@ static void __init kzm_init(void) gpio_request(GPIO_PORT15, NULL); gpio_direction_output(GPIO_PORT15, 1); /* power */ + /* enable Micro SD */ + gpio_request(GPIO_FN_SDHID2_0, NULL); + gpio_request(GPIO_FN_SDHID2_1, NULL); + gpio_request(GPIO_FN_SDHID2_2, NULL); + gpio_request(GPIO_FN_SDHID2_3, NULL); + gpio_request(GPIO_FN_SDHICMD2, NULL); + gpio_request(GPIO_FN_SDHICLK2, NULL); + gpio_request(GPIO_PORT14, NULL); + gpio_direction_output(GPIO_PORT14, 1); /* power */ + /* I2C 3 */ gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); + /* enable FSI2 port A (ak4648) */ + gpio_request(GPIO_FN_FSIACK, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAISLD, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + + /* enable USB */ + gpio_request(GPIO_FN_VBUS_0, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); #endif + i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices)); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 150122a4463..7ea2b31e319 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -41,6 +41,8 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/sh_flctl.h> #include <linux/pm_clock.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> @@ -203,31 +205,32 @@ * amixer set "HPOUTR Mixer DACH" on */ -/* - * FIXME !! - * - * gpio_no_direction - * gpio_pull_down - * are quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_no_direction(u32 addr) +/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = { - __raw_writeb(0x00, addr); -} + /* + * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V + * Since we cannot support both voltages, we support the default 1.8V + */ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; -static void __init gpio_pull_down(u32 addr) +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xA0; + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; - __raw_writeb(data, addr); -} +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; /* MTD */ static struct mtd_partition nor_flash_partitions[] = { @@ -1409,6 +1412,12 @@ static void __init mackerel_init(void) u32 srcr4; struct clk *clk; + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1458,11 +1467,11 @@ static void __init mackerel_init(void) /* USBHS0 */ gpio_request(GPIO_FN_VBUS0_0, NULL); - gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */ /* USBHS1 */ gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); /* enable FSI2 port A (ak4643) */ @@ -1475,8 +1484,8 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); - gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ @@ -1614,20 +1623,20 @@ static void __init mackerel_init(void) platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &hdmi_lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &meram_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &nand_flash_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device); #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device); #endif - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device); - sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi2_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device); hdmi_init_pm_clock(); sh7372_pm_init(); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 14de3787caf..3a528cf4366 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -27,6 +27,8 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <mach/hardware.h> #include <mach/r8a7779.h> @@ -37,6 +39,12 @@ #include <asm/hardware/gic.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* SMSC LAN89218 */ static struct resource smsc911x_resources[] = { [0] = { @@ -73,6 +81,8 @@ static struct platform_device *marzen_devices[] __initdata = { static void __init marzen_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + r8a7779_pinmux_init(); /* SCIF2 (CN18: DEBUG0) */ diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 26eea5f2105..ad5fccc7b5e 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -43,7 +43,10 @@ /* CPG registers */ #define FRQCRA 0xe6150000 #define FRQCRB 0xe6150004 +#define VCLKCR1 0xE6150008 +#define VCLKCR2 0xE615000c #define FRQCRC 0xe61500e0 +#define FSIACKCR 0xe6150018 #define PLLC01CR 0xe6150028 #define SUBCKCR 0xe6150080 @@ -54,6 +57,8 @@ #define MSTPSR2 0xe6150040 #define MSTPSR3 0xe6150048 #define MSTPSR4 0xe615004c +#define FSIBCKCR 0xe6150090 +#define HDMICKCR 0xe6150094 #define SMSTPCR0 0xe6150130 #define SMSTPCR1 0xe6150134 #define SMSTPCR2 0xe6150138 @@ -271,6 +276,13 @@ static struct clk usb24_clk = { .parent = &usb24s_clk, }; +/* External FSIACK/FSIBCK clock */ +static struct clk fsiack_clk = { +}; + +static struct clk fsibck_clk = { +}; + struct clk *main_clks[] = { &extalr_clk, &extal1_clk, @@ -288,6 +300,8 @@ struct clk *main_clks[] = { &pllc1_div2_clk, &usb24s_clk, &usb24_clk, + &fsiack_clk, + &fsibck_clk, }; static void div4_kick(struct clk *clk) @@ -313,6 +327,107 @@ static struct clk_div4_table div4_table = { .kick = div4_kick, }; +/* DIV6 reparent */ +enum { + DIV6_HDMI, + DIV6_VCLK1, DIV6_VCLK2, + DIV6_FSIA, DIV6_FSIB, + DIV6_REPARENT_NR, +}; + +static struct clk *hdmi_parent[] = { + [0] = &pllc1_div2_clk, + [1] = &system_clk, + [2] = &dv_clk +}; + +static struct clk *vclk_parents[8] = { + [0] = &pllc1_div2_clk, + [2] = &dv_clk, + [3] = &usb24s_clk, + [4] = &extal1_div2_clk, + [5] = &extalr_clk, +}; + +static struct clk *fsia_parents[] = { + [0] = &pllc1_div2_clk, + [1] = &fsiack_clk, /* external clock */ +}; + +static struct clk *fsib_parents[] = { + [0] = &pllc1_div2_clk, + [1] = &fsibck_clk, /* external clock */ +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0, + hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2), + [DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0, + vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3), + [DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0, + vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3), + [DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0, + fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2), + [DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0, + fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), +}; + +/* HDMI1/2 clock */ +static unsigned long hdmi12_recalc(struct clk *clk) +{ + u32 val = __raw_readl(HDMICKCR); + int shift = (int)clk->priv; + + val >>= shift; + val &= 0x3; + + return clk->parent->rate / (1 << val); +}; + +static int hdmi12_set_rate(struct clk *clk, unsigned long rate) +{ + u32 val, mask; + int i, shift; + + for (i = 0; i < 3; i++) + if (rate == clk->parent->rate / (1 << i)) + goto find; + return -ENODEV; + +find: + shift = (int)clk->priv; + + val = __raw_readl(HDMICKCR); + mask = ~(0x3 << shift); + val = (val & mask) | i << shift; + __raw_writel(val, HDMICKCR); + + return 0; +}; + +static struct sh_clk_ops hdmi12_clk_ops = { + .recalc = hdmi12_recalc, + .set_rate = hdmi12_set_rate, +}; + +static struct clk hdmi1_clk = { + .ops = &hdmi12_clk_ops, + .priv = (void *)9, + .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */ +}; + +static struct clk hdmi2_clk = { + .ops = &hdmi12_clk_ops, + .priv = (void *)11, + .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */ +}; + +static struct clk *late_main_clks[] = { + &hdmi1_clk, + &hdmi2_clk, +}; + +/* MSTP */ enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, @@ -343,11 +458,12 @@ static struct clk div6_clks[DIV6_NR] = { }; enum { - MSTP125, + MSTP128, MSTP127, MSTP125, MSTP116, MSTP111, MSTP100, MSTP117, MSTP230, MSTP222, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP329, MSTP328, MSTP323, MSTP320, @@ -360,6 +476,8 @@ enum { }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 28, 0), /* CEU21 */ + [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */ [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ @@ -368,6 +486,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */ [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */ + [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ + [MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ + [MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -408,6 +530,12 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("usb24s", &usb24s_clk), + CLKDEV_CON_ID("hdmi1", &hdmi1_clk), + CLKDEV_CON_ID("hdmi2", &hdmi2_clk), + CLKDEV_CON_ID("video1", &div6_reparent_clks[DIV6_VCLK1]), + CLKDEV_CON_ID("video2", &div6_reparent_clks[DIV6_VCLK2]), + CLKDEV_CON_ID("fsiack", &fsiack_clk), + CLKDEV_CON_ID("fsibck", &fsibck_clk), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -430,6 +558,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), + CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), + CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), @@ -438,7 +568,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), - + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), + CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), + CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), @@ -459,6 +592,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]), CLKDEV_ICK_ID("pci", "renesas_usbhs", &div4_clks[DIV4_USBP]), CLKDEV_ICK_ID("usb24", "renesas_usbhs", &usb24_clk), + CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), + + CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), + CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), }; void __init r8a7740_clock_init(u8 md_ck) @@ -495,7 +632,14 @@ void __init r8a7740_clock_init(u8 md_ck) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_div6_reparent_register(div6_reparent_clks, + DIV6_REPARENT_NR); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 7d6e9fe47b5..339c62c824d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -162,7 +162,7 @@ void __init r8a7779_clock_init(void) ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 006e7b5d304..162b791b898 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -344,7 +344,7 @@ void __init sh7367_clock_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 94d1f88246d..5a2894b1c96 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -704,7 +704,7 @@ void __init sh7372_clock_init(void) ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 0798a15936c..85f2a3ec2c4 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -355,7 +355,7 @@ void __init sh7377_clock_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 3946c4ba2aa..7f8da18a858 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, MSTP218, + MSTP219, MSTP218, MSTP217, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, + MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -498,6 +498,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ + [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -507,8 +508,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -553,6 +556,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ + CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -562,8 +566,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ + CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ @@ -612,7 +618,7 @@ void __init sh73a0_clock_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 01e2bc014f1..45e61dada03 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -77,6 +77,7 @@ extern void r8a7779_add_standard_devices(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); +extern void r8a7740_meram_workaround(void); extern unsigned int r8a7779_get_core_count(void); extern int r8a7779_platform_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/include/mach/dma-register.h new file mode 100644 index 00000000000..97c40bd9b94 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/dma-register.h @@ -0,0 +1,84 @@ +/* + * SH-ARM CPU-specific DMA definitions, used by both DMA drivers + * + * Copyright (C) 2012 Renesas Solutions Corp + * + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef DMA_REGISTER_H +#define DMA_REGISTER_H + +/* + * Direct Memory Access Controller + */ + +/* Transmit sizes and respective CHCR register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_64BIT = 7, + XMIT_SZ_128BIT = 3, + XMIT_SZ_256BIT = 4, + XMIT_SZ_512BIT = 5, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +static const unsigned int dma_ts_shift[] = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, + [XMIT_SZ_512BIT] = 6, +}; + +#define TS_LOW_BIT 0x3 /* --xx */ +#define TS_HI_BIT 0xc /* xx-- */ + +#define TS_LOW_SHIFT (3) +#define TS_HI_SHIFT (20 - 2) /* 2 bits for shifted low TS */ + +#define TS_INDEX2VAL(i) \ + ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\ + (((i) & TS_HI_BIT) << TS_HI_SHIFT)) + +#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) +#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) + + +/* + * USB High-Speed DMAC + */ +/* Transmit sizes and respective CHCR register values */ +enum { + USBTS_XMIT_SZ_8BYTE = 0, + USBTS_XMIT_SZ_16BYTE = 1, + USBTS_XMIT_SZ_32BYTE = 2, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +static const unsigned int dma_usbts_shift[] = { + [USBTS_XMIT_SZ_8BYTE] = 3, + [USBTS_XMIT_SZ_16BYTE] = 4, + [USBTS_XMIT_SZ_32BYTE] = 5, +}; + +#define USBTS_LOW_BIT 0x3 /* --xx */ +#define USBTS_HI_BIT 0x0 /* ---- */ + +#define USBTS_LOW_SHIFT 6 +#define USBTS_HI_SHIFT 0 + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +#endif /* DMA_REGISTER_H */ diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index de795b42232..844507d937c 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/sh_pfc.h> +#include <linux/io.h> #ifdef CONFIG_GPIOLIB @@ -27,4 +28,35 @@ static inline int irq_to_gpio(unsigned int irq) #endif /* CONFIG_GPIOLIB */ +/* + * FIXME !! + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static inline void __init gpio_direction_none(u32 addr) +{ + __raw_writeb(0x00, addr); +} + +static inline void __init gpio_request_pullup(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + +static inline void __init gpio_request_pulldown(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xA0; + + __raw_writeb(data, addr); +} + #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h new file mode 100644 index 00000000000..5a402840fe2 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Renesas Solutions Corp. + * + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef PM_RMOBILE_H +#define PM_RMOBILE_H + +#include <linux/pm_domain.h> + +struct platform_device; + +struct rmobile_pm_domain { + struct generic_pm_domain genpd; + struct dev_power_governor *gov; + int (*suspend)(void); + void (*resume)(void); + unsigned int bit_shift; + bool no_debug; +}; + +static inline +struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d) +{ + return container_of(d, struct rmobile_pm_domain, genpd); +} + +#ifdef CONFIG_PM +extern void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd); +extern void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd, + struct platform_device *pdev); +extern void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd, + struct rmobile_pm_domain *rmobile_sd); +#else +#define rmobile_init_pm_domain(pd) do { } while (0) +#define rmobile_add_device_to_domain(pd, pdev) do { } while (0) +#define rmobile_pm_add_subdomain(pd, sd) do { } while (0) +#endif /* CONFIG_PM */ + +#endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index 9d447abb969..7143147780d 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -19,6 +19,8 @@ #ifndef __ASM_R8A7740_H__ #define __ASM_R8A7740_H__ +#include <mach/pm-rmobile.h> + /* * MD_CKx pin */ @@ -139,7 +141,7 @@ enum { GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20, GPIO_FN_DBGMD21, - /* FSI */ + /* FSI-A */ GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */ GPIO_FN_FSIAISLD_PORT5, GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */ @@ -150,6 +152,9 @@ enum { GPIO_FN_FSIACK, GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT, + /* FSI-B */ + GPIO_FN_FSIBCK, + /* FMSI */ GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */ GPIO_FN_FMSISLD_PORT6, @@ -565,6 +570,10 @@ enum { GPIO_FN_RESETP_PULLUP, GPIO_FN_RESETP_PLAIN, + /* HDMI */ + GPIO_FN_HDMI_HPD, + GPIO_FN_HDMI_CEC, + /* SDENC */ GPIO_FN_SDENC_CPG, GPIO_FN_SDENC_DV_CLKI, @@ -581,4 +590,26 @@ enum { GPIO_FN_TRACEAUD_FROM_MEMC, }; +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI1_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI2_RX, + SHDMA_SLAVE_SDHI2_TX, + SHDMA_SLAVE_FSIA_RX, + SHDMA_SLAVE_FSIA_TX, + SHDMA_SLAVE_FSIB_TX, + SHDMA_SLAVE_USBHS_TX, + SHDMA_SLAVE_USBHS_RX, +}; + +#ifdef CONFIG_PM +extern struct rmobile_pm_domain r8a7740_pd_a4s; +extern struct rmobile_pm_domain r8a7740_pd_a3sp; +extern struct rmobile_pm_domain r8a7740_pd_a4lc; +#endif /* CONFIG_PM */ + #endif /* __ASM_R8A7740_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 915d0093da0..b59048e6d8f 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -13,6 +13,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> +#include <mach/pm-rmobile.h> /* * Pin Function Controller: @@ -477,42 +478,16 @@ extern struct clk sh7372_fsibck_clk; extern struct clk sh7372_fsidiva_clk; extern struct clk sh7372_fsidivb_clk; -struct platform_device; - -struct sh7372_pm_domain { - struct generic_pm_domain genpd; - struct dev_power_governor *gov; - int (*suspend)(void); - void (*resume)(void); - unsigned int bit_shift; - bool no_debug; -}; - -static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) -{ - return container_of(d, struct sh7372_pm_domain, genpd); -} - #ifdef CONFIG_PM -extern struct sh7372_pm_domain sh7372_a4lc; -extern struct sh7372_pm_domain sh7372_a4mp; -extern struct sh7372_pm_domain sh7372_d4; -extern struct sh7372_pm_domain sh7372_a4r; -extern struct sh7372_pm_domain sh7372_a3rv; -extern struct sh7372_pm_domain sh7372_a3ri; -extern struct sh7372_pm_domain sh7372_a4s; -extern struct sh7372_pm_domain sh7372_a3sp; -extern struct sh7372_pm_domain sh7372_a3sg; - -extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd); -extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, - struct platform_device *pdev); -extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, - struct sh7372_pm_domain *sh7372_sd); -#else -#define sh7372_init_pm_domain(pd) do { } while(0) -#define sh7372_add_device_to_domain(pd, pdev) do { } while(0) -#define sh7372_pm_add_subdomain(pd, sd) do { } while(0) +extern struct rmobile_pm_domain sh7372_pd_a4lc; +extern struct rmobile_pm_domain sh7372_pd_a4mp; +extern struct rmobile_pm_domain sh7372_pd_d4; +extern struct rmobile_pm_domain sh7372_pd_a4r; +extern struct rmobile_pm_domain sh7372_pd_a3rv; +extern struct rmobile_pm_domain sh7372_pd_a3ri; +extern struct rmobile_pm_domain sh7372_pd_a4s; +extern struct rmobile_pm_domain sh7372_pd_a3sp; +extern struct rmobile_pm_domain sh7372_pd_a3sg; #endif /* CONFIG_PM */ extern void sh7372_intcs_suspend(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 398e2c10913..fe950f25d79 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -516,6 +516,13 @@ enum { SHDMA_SLAVE_SDHI2_RX, SHDMA_SLAVE_MMCIF_TX, SHDMA_SLAVE_MMCIF_RX, + SHDMA_SLAVE_FSI2A_TX, + SHDMA_SLAVE_FSI2A_RX, + SHDMA_SLAVE_FSI2B_TX, + SHDMA_SLAVE_FSI2B_RX, + SHDMA_SLAVE_FSI2C_TX, + SHDMA_SLAVE_FSI2C_RX, + SHDMA_SLAVE_FSI2D_RX, }; /* diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index 09c42afcb22..9a69a31918b 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -71,10 +71,12 @@ enum { DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, + HDMI, USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND, RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, SPU2_0, SPU2_1, FSI, FMSI, + HDMI_SSS, HDMI_KEY, IPMMU, AP_ARM_CTIIRQ, AP_ARM_PMURQ, MFIS2, @@ -182,6 +184,7 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(USBH_EHCI, 0x1580), INTC_VECT(USBH_PME, 0x15A0), INTC_VECT(USBH_BIND, 0x15C0), + INTC_VECT(HDMI, 0x1700), INTC_VECT(RSPI_OVRF, 0x1780), INTC_VECT(RSPI_SPTEF, 0x17A0), INTC_VECT(RSPI_SPRF, 0x17C0), @@ -189,6 +192,8 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(SPU2_1, 0x1820), INTC_VECT(FSI, 0x1840), INTC_VECT(FMSI, 0x1860), + INTC_VECT(HDMI_SSS, 0x18A0), + INTC_VECT(HDMI_KEY, 0x18C0), INTC_VECT(IPMMU, 0x1920), INTC_VECT(AP_ARM_CTIIRQ, 0x1980), INTC_VECT(AP_ARM_PMURQ, 0x19A0), @@ -304,11 +309,11 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { USBH_EHCI, USBH_PME, USBH_BIND, 0 } }, /* IMR3A3 / IMCR3A3 */ { /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8, - { 0, 0, 0, 0, + { HDMI, 0, 0, 0, RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } }, { /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8, { SPU2_0, SPU2_1, FSI, FMSI, - 0, 0, 0, 0 } }, + 0, HDMI_SSS, HDMI_KEY, 0 } }, { /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8, { 0, IPMMU, 0, 0, AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } }, @@ -353,10 +358,10 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } }, /* IPRGA3 */ /* IPRHA3 */ - /* IPRIA3 */ + { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { HDMI, 0, 0, 0 } }, { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } }, { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - /* IPRLA3 */ + { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, HDMI_SSS, HDMI_KEY, 0 } }, { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } }, { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c index 670fe1869db..ce9e7fa5cc8 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7740.c +++ b/arch/arm/mach-shmobile/pfc-r8a7740.c @@ -169,7 +169,7 @@ enum { DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK, DBGMD21_MARK, - /* FSI */ + /* FSI-A */ FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */ FSIAISLD_PORT5_MARK, FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */ @@ -178,6 +178,9 @@ enum { FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK, FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK, + /* FSI-B */ + FSIBCK_MARK, + /* FMSI */ FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */ FMSISLD_PORT6_MARK, @@ -560,6 +563,9 @@ enum { /* SDENC */ SDENC_CPG_MARK, SDENC_DV_CLKI_MARK, + /* HDMI */ + HDMI_HPD_MARK, HDMI_CEC_MARK, + /* DEBUG */ EDEBGREQ_PULLUP_MARK, /* for JTAG */ EDEBGREQ_PULLDOWN_MARK, @@ -771,6 +777,7 @@ static pinmux_enum_t pinmux_data[] = { /* Port11 */ PINMUX_DATA(FSIACK_MARK, PORT11_FN1), + PINMUX_DATA(FSIBCK_MARK, PORT11_FN2), PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0), /* Port12 */ @@ -1254,7 +1261,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(A21_MARK, PORT120_FN1), PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2), PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0), - PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0), + PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_1), /* Port121 */ PINMUX_DATA(A20_MARK, PORT121_FN1), @@ -1616,13 +1623,15 @@ static pinmux_enum_t pinmux_data[] = { /* Port209 */ PINMUX_DATA(VBUS_MARK, PORT209_FN1), - PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1), + PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_0), /* Port210 */ PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1), + PINMUX_DATA(HDMI_HPD_MARK, PORT210_FN1), /* Port211 */ PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1), + PINMUX_DATA(HDMI_CEC_MARK, PORT211_FN1), /* LCDC select */ PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), @@ -1691,7 +1700,7 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20), GPIO_FN(DBGMD21), - /* FSI */ + /* FSI-A */ GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */ GPIO_FN(FSIAISLD_PORT5), GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */ @@ -1700,6 +1709,9 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC), GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT), + /* FSI-B */ + GPIO_FN(FSIBCK), + /* FMSI */ GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */ GPIO_FN(FMSISLD_PORT6), @@ -2097,6 +2109,10 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(SDENC_CPG), GPIO_FN(SDENC_DV_CLKI), + /* HDMI */ + GPIO_FN(HDMI_HPD), + GPIO_FN(HDMI_CEC), + /* SYSC */ GPIO_FN(RESETP_PULLUP), GPIO_FN(RESETP_PLAIN), diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index e859fcdb3d5..fde0d23121d 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,8 +22,13 @@ #include <mach/common.h> #include <mach/emev2.h> +#ifdef CONFIG_ARCH_SH73A0 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) +#else +#define is_sh73a0() (0) +#endif + #define is_r8a7779() machine_is_marzen() #ifdef CONFIG_ARCH_EMEV2 diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c new file mode 100644 index 00000000000..893504d012a --- /dev/null +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -0,0 +1,54 @@ +/* + * r8a7740 power management support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/console.h> +#include <mach/pm-rmobile.h> + +#ifdef CONFIG_PM +static int r8a7740_pd_a4s_suspend(void) +{ + /* + * The A4S domain contains the CPU core and therefore it should + * only be turned off if the CPU is in use. + */ + return -EBUSY; +} + +struct rmobile_pm_domain r8a7740_pd_a4s = { + .genpd.name = "A4S", + .bit_shift = 10, + .gov = &pm_domain_always_on_gov, + .no_debug = true, + .suspend = r8a7740_pd_a4s_suspend, +}; + +static int r8a7740_pd_a3sp_suspend(void) +{ + /* + * Serial consoles make use of SCIF hardware located in A3SP, + * keep such power domain on if "no_console_suspend" is set. + */ + return console_suspend_enabled ? 0 : -EBUSY; +} + +struct rmobile_pm_domain r8a7740_pd_a3sp = { + .genpd.name = "A3SP", + .bit_shift = 11, + .gov = &pm_domain_always_on_gov, + .no_debug = true, + .suspend = r8a7740_pd_a3sp_suspend, +}; + +struct rmobile_pm_domain r8a7740_pd_a4lc = { + .genpd.name = "A4LC", + .bit_shift = 1, +}; + +#endif /* CONFIG_PM */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c new file mode 100644 index 00000000000..a8562540f1d --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -0,0 +1,167 @@ +/* + * rmobile power management support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * based on pm-sh7372.c + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pm_clock.h> +#include <asm/io.h> +#include <mach/pm-rmobile.h> + +/* SYSC */ +#define SPDCR 0xe6180008 +#define SWUCR 0xe6180014 +#define PSTR 0xe6180080 + +#define PSTR_RETRIES 100 +#define PSTR_DELAY_US 10 + +#ifdef CONFIG_PM +static int rmobile_pd_power_down(struct generic_pm_domain *genpd) +{ + struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd); + unsigned int mask = 1 << rmobile_pd->bit_shift; + + if (rmobile_pd->suspend) { + int ret = rmobile_pd->suspend(); + + if (ret) + return ret; + } + + if (__raw_readl(PSTR) & mask) { + unsigned int retry_count; + __raw_writel(mask, SPDCR); + + for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SPDCR) & mask)) + break; + cpu_relax(); + } + } + + if (!rmobile_pd->no_debug) + pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", + genpd->name, mask, __raw_readl(PSTR)); + + return 0; +} + +static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd, + bool do_resume) +{ + unsigned int mask = 1 << rmobile_pd->bit_shift; + unsigned int retry_count; + int ret = 0; + + if (__raw_readl(PSTR) & mask) + goto out; + + __raw_writel(mask, SWUCR); + + for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SWUCR) & mask)) + break; + if (retry_count > PSTR_RETRIES) + udelay(PSTR_DELAY_US); + else + cpu_relax(); + } + if (!retry_count) + ret = -EIO; + + if (!rmobile_pd->no_debug) + pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", + rmobile_pd->genpd.name, mask, __raw_readl(PSTR)); + +out: + if (ret == 0 && rmobile_pd->resume && do_resume) + rmobile_pd->resume(); + + return ret; +} + +static int rmobile_pd_power_up(struct generic_pm_domain *genpd) +{ + return __rmobile_pd_power_up(to_rmobile_pd(genpd), true); +} + +static bool rmobile_pd_active_wakeup(struct device *dev) +{ + bool (*active_wakeup)(struct device *dev); + + active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; + return active_wakeup ? active_wakeup(dev) : true; +} + +static int rmobile_pd_stop_dev(struct device *dev) +{ + int (*stop)(struct device *dev); + + stop = dev_gpd_data(dev)->ops.stop; + if (stop) { + int ret = stop(dev); + if (ret) + return ret; + } + return pm_clk_suspend(dev); +} + +static int rmobile_pd_start_dev(struct device *dev) +{ + int (*start)(struct device *dev); + int ret; + + ret = pm_clk_resume(dev); + if (ret) + return ret; + + start = dev_gpd_data(dev)->ops.start; + if (start) + ret = start(dev); + + return ret; +} + +void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) +{ + struct generic_pm_domain *genpd = &rmobile_pd->genpd; + struct dev_power_governor *gov = rmobile_pd->gov; + + pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); + genpd->dev_ops.stop = rmobile_pd_stop_dev; + genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; + genpd->dev_irq_safe = true; + genpd->power_off = rmobile_pd_power_down; + genpd->power_on = rmobile_pd_power_up; + __rmobile_pd_power_up(rmobile_pd, false); +} + +void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + pm_genpd_add_device(&rmobile_pd->genpd, dev); + if (pm_clk_no_clocks(dev)) + pm_clk_add(dev, NULL); +} + +void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd, + struct rmobile_pm_domain *rmobile_sd) +{ + pm_genpd_add_subdomain(&rmobile_pd->genpd, &rmobile_sd->genpd); +} +#endif /* CONFIG_PM */ diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index a3bdb12acde..79203706922 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -26,6 +26,7 @@ #include <asm/suspend.h> #include <mach/common.h> #include <mach/sh7372.h> +#include <mach/pm-rmobile.h> /* DBG */ #define DBGREG1 0xe6100020 @@ -41,13 +42,10 @@ #define PLLC01STPCR 0xe61500c8 /* SYSC */ -#define SPDCR 0xe6180008 -#define SWUCR 0xe6180014 #define SBAR 0xe6180020 #define WUPRMSK 0xe6180028 #define WUPSMSK 0xe618002c #define WUPSMSK2 0xe6180048 -#define PSTR 0xe6180080 #define WUPSFAC 0xe6180098 #define IRQCR 0xe618022c #define IRQCR2 0xe6180238 @@ -71,188 +69,48 @@ /* AP-System Core */ #define APARMBAREA 0xe6f10020 -#define PSTR_RETRIES 100 -#define PSTR_DELAY_US 10 - #ifdef CONFIG_PM -static int pd_power_down(struct generic_pm_domain *genpd) -{ - struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); - unsigned int mask = 1 << sh7372_pd->bit_shift; - - if (sh7372_pd->suspend) { - int ret = sh7372_pd->suspend(); - - if (ret) - return ret; - } - - if (__raw_readl(PSTR) & mask) { - unsigned int retry_count; - - __raw_writel(mask, SPDCR); - - for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SPDCR) & mask)) - break; - cpu_relax(); - } - } - - if (!sh7372_pd->no_debug) - pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", - genpd->name, mask, __raw_readl(PSTR)); - - return 0; -} - -static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume) -{ - unsigned int mask = 1 << sh7372_pd->bit_shift; - unsigned int retry_count; - int ret = 0; - - if (__raw_readl(PSTR) & mask) - goto out; - - __raw_writel(mask, SWUCR); - - for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SWUCR) & mask)) - break; - if (retry_count > PSTR_RETRIES) - udelay(PSTR_DELAY_US); - else - cpu_relax(); - } - if (!retry_count) - ret = -EIO; - - if (!sh7372_pd->no_debug) - pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", - sh7372_pd->genpd.name, mask, __raw_readl(PSTR)); - - out: - if (ret == 0 && sh7372_pd->resume && do_resume) - sh7372_pd->resume(); - - return ret; -} - -static int pd_power_up(struct generic_pm_domain *genpd) -{ - return __pd_power_up(to_sh7372_pd(genpd), true); -} - -static int sh7372_a4r_suspend(void) -{ - sh7372_intcs_suspend(); - __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ - return 0; -} - -static bool pd_active_wakeup(struct device *dev) -{ - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int sh7372_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int sh7372_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; -} - -void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) -{ - struct generic_pm_domain *genpd = &sh7372_pd->genpd; - struct dev_power_governor *gov = sh7372_pd->gov; - - pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = sh7372_stop_dev; - genpd->dev_ops.start = sh7372_start_dev; - genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->dev_irq_safe = true; - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - __pd_power_up(sh7372_pd, false); -} - -void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, - struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_genpd_add_device(&sh7372_pd->genpd, dev); - if (pm_clk_no_clocks(dev)) - pm_clk_add(dev, NULL); -} - -void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, - struct sh7372_pm_domain *sh7372_sd) -{ - pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd); -} - -struct sh7372_pm_domain sh7372_a4lc = { +struct rmobile_pm_domain sh7372_pd_a4lc = { .genpd.name = "A4LC", .bit_shift = 1, }; -struct sh7372_pm_domain sh7372_a4mp = { +struct rmobile_pm_domain sh7372_pd_a4mp = { .genpd.name = "A4MP", .bit_shift = 2, }; -struct sh7372_pm_domain sh7372_d4 = { +struct rmobile_pm_domain sh7372_pd_d4 = { .genpd.name = "D4", .bit_shift = 3, }; -struct sh7372_pm_domain sh7372_a4r = { +static int sh7372_a4r_pd_suspend(void) +{ + sh7372_intcs_suspend(); + __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ + return 0; +} + +struct rmobile_pm_domain sh7372_pd_a4r = { .genpd.name = "A4R", .bit_shift = 5, - .suspend = sh7372_a4r_suspend, + .suspend = sh7372_a4r_pd_suspend, .resume = sh7372_intcs_resume, }; -struct sh7372_pm_domain sh7372_a3rv = { +struct rmobile_pm_domain sh7372_pd_a3rv = { .genpd.name = "A3RV", .bit_shift = 6, }; -struct sh7372_pm_domain sh7372_a3ri = { +struct rmobile_pm_domain sh7372_pd_a3ri = { .genpd.name = "A3RI", .bit_shift = 8, }; -static int sh7372_a4s_suspend(void) +static int sh7372_pd_a4s_suspend(void) { /* * The A4S domain contains the CPU core and therefore it should @@ -261,15 +119,15 @@ static int sh7372_a4s_suspend(void) return -EBUSY; } -struct sh7372_pm_domain sh7372_a4s = { +struct rmobile_pm_domain sh7372_pd_a4s = { .genpd.name = "A4S", .bit_shift = 10, .gov = &pm_domain_always_on_gov, .no_debug = true, - .suspend = sh7372_a4s_suspend, + .suspend = sh7372_pd_a4s_suspend, }; -static int sh7372_a3sp_suspend(void) +static int sh7372_a3sp_pd_suspend(void) { /* * Serial consoles make use of SCIF hardware located in A3SP, @@ -278,32 +136,22 @@ static int sh7372_a3sp_suspend(void) return console_suspend_enabled ? 0 : -EBUSY; } -struct sh7372_pm_domain sh7372_a3sp = { +struct rmobile_pm_domain sh7372_pd_a3sp = { .genpd.name = "A3SP", .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, - .suspend = sh7372_a3sp_suspend, + .suspend = sh7372_a3sp_pd_suspend, }; -struct sh7372_pm_domain sh7372_a3sg = { +struct rmobile_pm_domain sh7372_pd_a3sg = { .genpd.name = "A3SG", .bit_shift = 13, }; -#else /* !CONFIG_PM */ - -static inline void sh7372_a3sp_init(void) {} - -#endif /* !CONFIG_PM */ +#endif /* CONFIG_PM */ #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) -static int sh7372_do_idle_core_standby(unsigned long unused) -{ - cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ - return 0; -} - static void sh7372_set_reset_vector(unsigned long address) { /* set reset vector, translate 4k */ @@ -311,21 +159,6 @@ static void sh7372_set_reset_vector(unsigned long address) __raw_writel(0, APARMBAREA); } -static void sh7372_enter_core_standby(void) -{ - sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); - - /* enter sleep mode with SYSTBCR to 0x10 */ - __raw_writel(0x10, SYSTBCR); - cpu_suspend(0, sh7372_do_idle_core_standby); - __raw_writel(0, SYSTBCR); - - /* disable reset vector translation */ - __raw_writel(0, SBAR); -} -#endif - -#ifdef CONFIG_SUSPEND static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode) { if (pllc0_on) @@ -465,22 +298,42 @@ static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2) static void sh7372_enter_a3sm_common(int pllc0_on) { + /* use INTCA together with SYSC for wakeup */ + sh7372_setup_sysc(1 << 0, 0); sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); sh7372_enter_sysc(pllc0_on, 1 << 12); } +#endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */ -static void sh7372_enter_a4s_common(int pllc0_on) +#ifdef CONFIG_CPU_IDLE +static int sh7372_do_idle_core_standby(unsigned long unused) { - sh7372_intca_suspend(); - memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); - sh7372_set_reset_vector(SMFRAM); - sh7372_enter_sysc(pllc0_on, 1 << 10); - sh7372_intca_resume(); + cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ + return 0; } -#endif +static void sh7372_enter_core_standby(void) +{ + sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); -#ifdef CONFIG_CPU_IDLE + /* enter sleep mode with SYSTBCR to 0x10 */ + __raw_writel(0x10, SYSTBCR); + cpu_suspend(0, sh7372_do_idle_core_standby); + __raw_writel(0, SYSTBCR); + + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} + +static void sh7372_enter_a3sm_pll_on(void) +{ + sh7372_enter_a3sm_common(1); +} + +static void sh7372_enter_a3sm_pll_off(void) +{ + sh7372_enter_a3sm_common(0); +} static void sh7372_cpuidle_setup(struct cpuidle_driver *drv) { @@ -492,7 +345,24 @@ static void sh7372_cpuidle_setup(struct cpuidle_driver *drv) state->target_residency = 20 + 10; state->flags = CPUIDLE_FLAG_TIME_VALID; shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby; + drv->state_count++; + + state = &drv->states[drv->state_count]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C3"); + strncpy(state->desc, "A3SM PLL ON", CPUIDLE_DESC_LEN); + state->exit_latency = 20; + state->target_residency = 30 + 20; + state->flags = CPUIDLE_FLAG_TIME_VALID; + shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_on; + drv->state_count++; + state = &drv->states[drv->state_count]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C4"); + strncpy(state->desc, "A3SM PLL OFF", CPUIDLE_DESC_LEN); + state->exit_latency = 120; + state->target_residency = 30 + 120; + state->flags = CPUIDLE_FLAG_TIME_VALID; + shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_off; drv->state_count++; } @@ -505,6 +375,14 @@ static void sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND +static void sh7372_enter_a4s_common(int pllc0_on) +{ + sh7372_intca_suspend(); + memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); + sh7372_set_reset_vector(SMFRAM); + sh7372_enter_sysc(pllc0_on, 1 << 10); + sh7372_intca_resume(); +} static int sh7372_enter_suspend(suspend_state_t suspend_state) { @@ -512,24 +390,21 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state) /* check active clocks to determine potential wakeup sources */ if (sh7372_sysc_valid(&msk, &msk2)) { - /* convert INTC mask and sense to SYSC mask and sense */ - sh7372_setup_sysc(msk, msk2); - if (!console_suspend_enabled && - sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) { + sh7372_pd_a4s.genpd.status == GPD_STATE_POWER_OFF) { + /* convert INTC mask/sense to SYSC mask/sense */ + sh7372_setup_sysc(msk, msk2); + /* enter A4S sleep with PLLC0 off */ pr_debug("entering A4S\n"); sh7372_enter_a4s_common(0); - } else { - /* enter A3SM sleep with PLLC0 off */ - pr_debug("entering A3SM\n"); - sh7372_enter_a3sm_common(0); + return 0; } - } else { - /* default to Core Standby that supports all wakeup sources */ - pr_debug("entering Core Standby\n"); - sh7372_enter_core_standby(); } + + /* default to enter A3SM sleep with PLLC0 off */ + pr_debug("entering A3SM\n"); + sh7372_enter_a3sm_common(0); return 0; } @@ -550,7 +425,7 @@ static int sh7372_pm_notifier_fn(struct notifier_block *notifier, * executed during system suspend and resume, respectively, so * that those functions don't crash while accessing the INTCS. */ - pm_genpd_poweron(&sh7372_a4r.genpd); + pm_genpd_poweron(&sh7372_pd_a4r.genpd); break; case PM_POST_SUSPEND: pm_genpd_poweroff_unused(); diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index ec4eb49c169..78948a9dba0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -23,9 +23,14 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> +#include <linux/dma-mapping.h> +#include <mach/dma-register.h> #include <mach/r8a7740.h> +#include <mach/pm-rmobile.h> #include <mach/common.h> #include <mach/irqs.h> #include <asm/mach-types.h> @@ -276,6 +281,272 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &cmt10_device, }; +/* DMA */ +static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = { + { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0xe6850030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0xe6850030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_TX, + .addr = 0xe6860030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc9, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_RX, + .addr = 0xe6860030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xca, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_TX, + .addr = 0xe6870030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xcd, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_RX, + .addr = 0xe6870030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xce, + }, { + .slave_id = SHDMA_SLAVE_FSIA_TX, + .addr = 0xfe1f0024, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xb1, + }, { + .slave_id = SHDMA_SLAVE_FSIA_RX, + .addr = 0xfe1f0020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xb2, + }, { + .slave_id = SHDMA_SLAVE_FSIB_TX, + .addr = 0xfe1f0064, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xb5, + }, +}; + +#define DMA_CHANNEL(a, b, c) \ +{ \ + .offset = a, \ + .dmars = b, \ + .dmars_bit = c, \ + .chclr_offset = (0x220 - 0x20) + a \ +} + +static const struct sh_dmae_channel r8a7740_dmae_channels[] = { + DMA_CHANNEL(0x00, 0, 0), + DMA_CHANNEL(0x10, 0, 8), + DMA_CHANNEL(0x20, 4, 0), + DMA_CHANNEL(0x30, 4, 8), + DMA_CHANNEL(0x50, 8, 0), + DMA_CHANNEL(0x60, 8, 8), +}; + +static struct sh_dmae_pdata dma_platform_data = { + .slave = r8a7740_dmae_slaves, + .slave_num = ARRAY_SIZE(r8a7740_dmae_slaves), + .channel = r8a7740_dmae_channels, + .channel_num = ARRAY_SIZE(r8a7740_dmae_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe008020, + .end = 0xfe00828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe009000, + .end = 0xfe00900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x20c0), + .end = evt2irq(0x20c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2000), + .end = evt2irq(0x20a0), + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe018020, + .end = 0xfe01828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe019000, + .end = 0xfe01900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x21c0), + .end = evt2irq(0x21c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2100), + .end = evt2irq(0x21a0), + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae2_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe028020, + .end = 0xfe02828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe029000, + .end = 0xfe02900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x22c0), + .end = evt2irq(0x22c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2200), + .end = evt2irq(0x22a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dma0_device = { + .name = "sh-dma-engine", + .id = 0, + .resource = r8a7740_dmae0_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae0_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma1_device = { + .name = "sh-dma-engine", + .id = 1, + .resource = r8a7740_dmae1_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae1_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma2_device = { + .name = "sh-dma-engine", + .id = 2, + .resource = r8a7740_dmae2_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae2_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +/* USB-DMAC */ +static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USBHS_TX, + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USBHS_RX, + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma_platform_data = { + .slave = r8a7740_usb_dma_slaves, + .slave_num = ARRAY_SIZE(r8a7740_usb_dma_slaves), + .channel = r8a7740_usb_dma_channels, + .channel_num = ARRAY_SIZE(r8a7740_usb_dma_channels), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, + .slave_only = 1, +}; + +static struct resource r8a7740_usb_dma_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = r8a7740_usb_dma_resources, + .num_resources = ARRAY_SIZE(r8a7740_usb_dma_resources), + .dev = { + .platform_data = &usb_dma_platform_data, + }, +}; + /* I2C */ static struct resource i2c0_resources[] = { [0] = { @@ -322,8 +593,30 @@ static struct platform_device i2c1_device = { static struct platform_device *r8a7740_late_devices[] __initdata = { &i2c0_device, &i2c1_device, + &dma0_device, + &dma1_device, + &dma2_device, + &usb_dma_device, }; +/* + * r8a7740 chip has lasting errata on MERAM buffer. + * this is work-around for it. + * see + * "Media RAM (MERAM)" on r8a7740 documentation + */ +#define MEBUFCNTR 0xFE950098 +void r8a7740_meram_workaround(void) +{ + void __iomem *reg; + + reg = ioremap_nocache(MEBUFCNTR, 4); + if (reg) { + iowrite32(0x01600164, reg); + iounmap(reg); + } +} + #define ICCR 0x0004 #define ICSTART 0x0070 @@ -380,10 +673,31 @@ void __init r8a7740_add_standard_devices(void) r8a7740_i2c_workaround(&i2c0_device); r8a7740_i2c_workaround(&i2c1_device); + /* PM domain */ + rmobile_init_pm_domain(&r8a7740_pd_a4s); + rmobile_init_pm_domain(&r8a7740_pd_a3sp); + rmobile_init_pm_domain(&r8a7740_pd_a4lc); + + rmobile_pm_add_subdomain(&r8a7740_pd_a4s, &r8a7740_pd_a3sp); + + /* add devices */ platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); platform_add_devices(r8a7740_late_devices, ARRAY_SIZE(r8a7740_late_devices)); + + /* add devices to PM domain */ + + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif0_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif1_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif2_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif3_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif4_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif5_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif6_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif7_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scifb_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &i2c1_device); } static void __init r8a7740_earlytimer_init(void) @@ -403,3 +717,49 @@ void __init r8a7740_add_early_devices(void) /* override timer setup with soc-specific code */ shmobile_timer.init = r8a7740_earlytimer_init; } + +#ifdef CONFIG_USE_OF + +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { + { } +}; + +void __init r8a7740_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7740_clock_init(0); + + platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + of_platform_populate(NULL, of_default_bus_match_table, + r8a7740_auxdata_lookup, NULL); +} + +static const char *r8a7740_boards_compat_dt[] __initdata = { + "renesas,r8a7740", + NULL, +}; + +DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)") + .map_io = r8a7740_map_io, + .init_early = r8a7740_add_early_devices_dt, + .init_irq = r8a7740_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = r8a7740_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = r8a7740_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index fafce9ce821..838a87be1d5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -33,6 +33,7 @@ #include <linux/sh_timer.h> #include <linux/pm_domain.h> #include <linux/dma-mapping.h> +#include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/sh7372.h> @@ -335,151 +336,126 @@ static struct platform_device iic1_device = { }; /* DMA */ -/* Transmit sizes and respective CHCR register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_64BIT = 7, - XMIT_SZ_128BIT = 3, - XMIT_SZ_256BIT = 4, - XMIT_SZ_512BIT = 5, -}; - -/* log2(size / 8) - used to calculate number of transfers */ -#define TS_SHIFT { \ - [XMIT_SZ_8BIT] = 0, \ - [XMIT_SZ_16BIT] = 1, \ - [XMIT_SZ_32BIT] = 2, \ - [XMIT_SZ_64BIT] = 3, \ - [XMIT_SZ_128BIT] = 4, \ - [XMIT_SZ_256BIT] = 5, \ - [XMIT_SZ_512BIT] = 6, \ -} - -#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \ - (((i) & 0xc) << (20 - 2))) - static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, .addr = 0xe6c40020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_SCIF0_RX, .addr = 0xe6c40024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_SCIF1_TX, .addr = 0xe6c50020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x25, }, { .slave_id = SHDMA_SLAVE_SCIF1_RX, .addr = 0xe6c50024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x26, }, { .slave_id = SHDMA_SLAVE_SCIF2_TX, .addr = 0xe6c60020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0xe6c60024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_SCIF3_TX, .addr = 0xe6c70020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x2d, }, { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0xe6c70024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x2e, }, { .slave_id = SHDMA_SLAVE_SCIF4_TX, .addr = 0xe6c80020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x39, }, { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0xe6c80024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3a, }, { .slave_id = SHDMA_SLAVE_SCIF5_TX, .addr = 0xe6cb0020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x35, }, { .slave_id = SHDMA_SLAVE_SCIF5_RX, .addr = 0xe6cb0024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x36, }, { .slave_id = SHDMA_SLAVE_SCIF6_TX, .addr = 0xe6c30040, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x3d, }, { .slave_id = SHDMA_SLAVE_SCIF6_RX, .addr = 0xe6c30060, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3e, }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0xe6850030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xc1, }, { .slave_id = SHDMA_SLAVE_SDHI0_RX, .addr = 0xe6850030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xc2, }, { .slave_id = SHDMA_SLAVE_SDHI1_TX, .addr = 0xe6860030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xc9, }, { .slave_id = SHDMA_SLAVE_SDHI1_RX, .addr = 0xe6860030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xca, }, { .slave_id = SHDMA_SLAVE_SDHI2_TX, .addr = 0xe6870030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xcd, }, { .slave_id = SHDMA_SLAVE_SDHI2_RX, .addr = 0xe6870030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xce, }, { .slave_id = SHDMA_SLAVE_FSIA_TX, .addr = 0xfe1f0024, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xb1, }, { .slave_id = SHDMA_SLAVE_FSIA_RX, .addr = 0xfe1f0020, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_RX(XMIT_SZ_32BIT), .mid_rid = 0xb2, }, { .slave_id = SHDMA_SLAVE_MMCIF_TX, .addr = 0xe6bd0034, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xd1, }, { .slave_id = SHDMA_SLAVE_MMCIF_RX, .addr = 0xe6bd0034, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_RX(XMIT_SZ_32BIT), .mid_rid = 0xd2, }, }; @@ -520,19 +496,17 @@ static const struct sh_dmae_channel sh7372_dmae_channels[] = { } }; -static const unsigned int ts_shift[] = TS_SHIFT; - static struct sh_dmae_pdata dma_platform_data = { .slave = sh7372_dmae_slaves, .slave_num = ARRAY_SIZE(sh7372_dmae_slaves), .channel = sh7372_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_dmae_channels), - .ts_low_shift = 3, - .ts_low_mask = 0x18, - .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ - .ts_high_mask = 0x00300000, - .ts_shift = ts_shift, - .ts_shift_num = ARRAY_SIZE(ts_shift), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), .dmaor_init = DMAOR_DME, .chclr_present = 1, }; @@ -654,17 +628,6 @@ static struct platform_device dma2_device = { /* * USB-DMAC */ - -unsigned int usbts_shift[] = {3, 4, 5}; - -enum { - XMIT_SZ_8BYTE = 0, - XMIT_SZ_16BYTE = 1, - XMIT_SZ_32BYTE = 2, -}; - -#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) - static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { { .offset = 0, @@ -677,10 +640,10 @@ static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { { .slave_id = SHDMA_SLAVE_USB0_TX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, { .slave_id = SHDMA_SLAVE_USB0_RX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, }; @@ -689,12 +652,12 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), .channel = sh7372_usb_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = 6, - .ts_low_mask = 0xc0, - .ts_high_shift = 0, - .ts_high_mask = 0, - .ts_shift = usbts_shift, - .ts_shift_num = ARRAY_SIZE(usbts_shift), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), .dmaor_init = DMAOR_DME, .chcr_offset = 0x14, .chcr_ie_bit = 1 << 5, @@ -739,10 +702,10 @@ static struct platform_device usb_dma0_device = { static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_USB1_TX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, { .slave_id = SHDMA_SLAVE_USB1_RX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, }; @@ -751,12 +714,12 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), .channel = sh7372_usb_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = 6, - .ts_low_mask = 0xc0, - .ts_high_shift = 0, - .ts_high_mask = 0, - .ts_shift = usbts_shift, - .ts_shift_num = ARRAY_SIZE(usbts_shift), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), .dmaor_init = DMAOR_DME, .chcr_offset = 0x14, .chcr_ie_bit = 1 << 5, @@ -1038,21 +1001,21 @@ static struct platform_device *sh7372_late_devices[] __initdata = { void __init sh7372_add_standard_devices(void) { - sh7372_init_pm_domain(&sh7372_a4lc); - sh7372_init_pm_domain(&sh7372_a4mp); - sh7372_init_pm_domain(&sh7372_d4); - sh7372_init_pm_domain(&sh7372_a4r); - sh7372_init_pm_domain(&sh7372_a3rv); - sh7372_init_pm_domain(&sh7372_a3ri); - sh7372_init_pm_domain(&sh7372_a4s); - sh7372_init_pm_domain(&sh7372_a3sp); - sh7372_init_pm_domain(&sh7372_a3sg); - - sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv); - sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc); - - sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg); - sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp); + rmobile_init_pm_domain(&sh7372_pd_a4lc); + rmobile_init_pm_domain(&sh7372_pd_a4mp); + rmobile_init_pm_domain(&sh7372_pd_d4); + rmobile_init_pm_domain(&sh7372_pd_a4r); + rmobile_init_pm_domain(&sh7372_pd_a3rv); + rmobile_init_pm_domain(&sh7372_pd_a3ri); + rmobile_init_pm_domain(&sh7372_pd_a4s); + rmobile_init_pm_domain(&sh7372_pd_a3sp); + rmobile_init_pm_domain(&sh7372_pd_a3sg); + + rmobile_pm_add_subdomain(&sh7372_pd_a4lc, &sh7372_pd_a3rv); + rmobile_pm_add_subdomain(&sh7372_pd_a4r, &sh7372_pd_a4lc); + + rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sg); + rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sp); platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); @@ -1060,30 +1023,30 @@ void __init sh7372_add_standard_devices(void) platform_add_devices(sh7372_late_devices, ARRAY_SIZE(sh7372_late_devices)); - sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); - sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); - sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device); - sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device); + rmobile_add_device_to_domain(&sh7372_pd_a3rv, &vpu_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif2_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif3_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif4_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif5_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif6_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &iic1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma2_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &iic0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu2_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu3_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &jpu_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu00_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu01_device); } static void __init sh7372_earlytimer_init(void) diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index d576a6abbad..855b1506caf 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> @@ -500,3 +501,49 @@ void __init sh7377_add_early_devices(void) /* override timer setup with soc-specific code */ shmobile_timer.init = sh7377_earlytimer_init; } + +#ifdef CONFIG_USE_OF + +void __init sh7377_add_early_devices_dt(void) +{ + shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */ + + early_platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = { + { } +}; + +void __init sh7377_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + sh7377_clock_init(); + + platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); + + of_platform_populate(NULL, of_default_bus_match_table, + sh7377_auxdata_lookup, NULL); +} + +static const char *sh7377_boards_compat_dt[] __initdata = { + "renesas,sh7377", + NULL, +}; + +DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)") + .map_io = sh7377_map_io, + .init_early = sh7377_add_early_devices_dt, + .init_irq = sh7377_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = sh7377_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = sh7377_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 04a0dfe7549..d230af656fc 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -30,6 +30,7 @@ #include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/sh73a0.h> @@ -415,32 +416,6 @@ static struct platform_device i2c4_device = { .num_resources = ARRAY_SIZE(i2c4_resources), }; -/* Transmit sizes and respective CHCR register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_64BIT = 7, - XMIT_SZ_128BIT = 3, - XMIT_SZ_256BIT = 4, - XMIT_SZ_512BIT = 5, -}; - -/* log2(size / 8) - used to calculate number of transfers */ -#define TS_SHIFT { \ - [XMIT_SZ_8BIT] = 0, \ - [XMIT_SZ_16BIT] = 1, \ - [XMIT_SZ_32BIT] = 2, \ - [XMIT_SZ_64BIT] = 3, \ - [XMIT_SZ_128BIT] = 4, \ - [XMIT_SZ_256BIT] = 5, \ - [XMIT_SZ_512BIT] = 6, \ -} - -#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | (((i) & 0xc) << (20 - 2))) -#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) -#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) - static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, @@ -604,19 +579,17 @@ static const struct sh_dmae_channel sh73a0_dmae_channels[] = { DMAE_CHANNEL(0x8980), }; -static const unsigned int ts_shift[] = TS_SHIFT; - static struct sh_dmae_pdata sh73a0_dmae_platform_data = { .slave = sh73a0_dmae_slaves, .slave_num = ARRAY_SIZE(sh73a0_dmae_slaves), .channel = sh73a0_dmae_channels, .channel_num = ARRAY_SIZE(sh73a0_dmae_channels), - .ts_low_shift = 3, - .ts_low_mask = 0x18, - .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ - .ts_high_mask = 0x00300000, - .ts_shift = ts_shift, - .ts_shift_num = ARRAY_SIZE(ts_shift), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), .dmaor_init = DMAOR_DME, }; @@ -651,6 +624,116 @@ static struct platform_device dma0_device = { }, }; +/* MPDMAC */ +static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_FSI2A_RX, + .addr = 0xec230020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd6, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2A_TX, + .addr = 0xec230024, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd5, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2C_RX, + .addr = 0xec230060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xda, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2C_TX, + .addr = 0xec230064, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd9, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2B_RX, + .addr = 0xec240020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x8e, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2B_TX, + .addr = 0xec240024, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x8d, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2D_RX, + .addr = 0xec240060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x9a, /* CHECK ME */ + }, +}; + +#define MPDMA_CHANNEL(a, b, c) \ +{ \ + .offset = a, \ + .dmars = b, \ + .dmars_bit = c, \ + .chclr_offset = (0x220 - 0x20) + a \ +} + +static const struct sh_dmae_channel sh73a0_mpdma_channels[] = { + MPDMA_CHANNEL(0x00, 0, 0), + MPDMA_CHANNEL(0x10, 0, 8), + MPDMA_CHANNEL(0x20, 4, 0), + MPDMA_CHANNEL(0x30, 4, 8), + MPDMA_CHANNEL(0x50, 8, 0), + MPDMA_CHANNEL(0x70, 8, 8), +}; + +static struct sh_dmae_pdata sh73a0_mpdma_platform_data = { + .slave = sh73a0_mpdma_slaves, + .slave_num = ARRAY_SIZE(sh73a0_mpdma_slaves), + .channel = sh73a0_mpdma_channels, + .channel_num = ARRAY_SIZE(sh73a0_mpdma_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, +}; + +/* Resource order important! */ +static struct resource sh73a0_mpdma_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xec618020, + .end = 0xec61828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xec619000, + .end = 0xec61900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = gic_spi(181), + .end = gic_spi(181), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = gic_spi(175), + .end = gic_spi(180), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mpdma0_device = { + .name = "sh-dma-engine", + .id = 1, + .resource = sh73a0_mpdma_resources, + .num_resources = ARRAY_SIZE(sh73a0_mpdma_resources), + .dev = { + .platform_data = &sh73a0_mpdma_platform_data, + }, +}; + static struct platform_device *sh73a0_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -673,6 +756,7 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &i2c3_device, &i2c4_device, &dma0_device, + &mpdma0_device, }; #define SRCR2 0xe61580b0 diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile new file mode 100644 index 00000000000..4fb93240971 --- /dev/null +++ b/arch/arm/mach-socfpga/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-y := socfpga.o diff --git a/arch/arm/mach-socfpga/Makefile.boot b/arch/arm/mach-socfpga/Makefile.boot new file mode 100644 index 00000000000..dae9661a768 --- /dev/null +++ b/arch/arm/mach-socfpga/Makefile.boot @@ -0,0 +1 @@ +zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-socfpga/include/mach/debug-macro.S b/arch/arm/mach-socfpga/include/mach/debug-macro.S new file mode 100644 index 00000000000..d6f26d23374 --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/debug-macro.S @@ -0,0 +1,16 @@ +/* + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .macro addruart, rp, rv, tmp + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rp, \rp, #0x00c00000 + orr \rv, \rp, #0xfe000000 @ virtual base + orr \rp, \rp, #0xff000000 @ physical base + .endm + diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-socfpga/include/mach/timex.h index ac8b7dfc85e..43df4354e46 100644 --- a/arch/arm/mach-at91/include/mach/irqs.h +++ b/arch/arm/mach-socfpga/include/mach/timex.h @@ -1,7 +1,5 @@ /* - * arch/arm/mach-at91/include/mach/irqs.h - * - * Copyright (C) 2004 SAN People + * Copyright (C) 2003 ARM Limited * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,31 +16,4 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include <linux/io.h> -#include <mach/at91_aic.h> - -#define NR_AIC_IRQS 32 - - -/* - * Acknowledge interrupt with AIC after interrupt has been handled. - * (by kernel/irq.c) - */ -#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0) - - -/* - * IRQ interrupt symbols are the AT91xxx_ID_* symbols - * for IRQs handled directly through the AIC, or else the AT91_PIN_* - * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 5 banks of GPIO. - */ -#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) - -/* FIQ is AIC source 0. */ -#define FIQ_START AT91_ID_FIQ - -#endif +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-socfpga/include/mach/uncompress.h b/arch/arm/mach-socfpga/include/mach/uncompress.h new file mode 100644 index 00000000000..bbe20e69632 --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/uncompress.h @@ -0,0 +1,9 @@ +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#define putc(c) +#define flush() +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c new file mode 100644 index 00000000000..f01e1ebf539 --- /dev/null +++ b/arch/arm/mach-socfpga/socfpga.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Altera Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/dw_apb_timer.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/arch.h> + +extern void socfpga_init_clocks(void); + +const static struct of_device_id irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void __init gic_init_irq(void) +{ + of_irq_init(irq_match); +} + +static void socfpga_cyclone5_restart(char mode, const char *cmd) +{ + /* TODO: */ +} + +static void __init socfpga_cyclone5_init(void) +{ + l2x0_of_init(0, ~0UL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + socfpga_init_clocks(); +} + +static const char *altera_dt_match[] = { + "altr,socfpga", + "altr,socfpga-cyclone5", + NULL +}; + +DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") + .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, + .timer = &dw_apb_timer, + .init_machine = socfpga_cyclone5_init, + .restart = socfpga_cyclone5_restart, + .dt_compat = altera_dt_match, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 0f41bd1c47c..66db5f13af8 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -87,7 +87,7 @@ void __init spear3xx_map_io(void) static void __init spear3xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear3xx_clk_init(); diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e3596583..9af67d003c6 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -423,7 +423,7 @@ void __init spear6xx_map_io(void) static void __init spear6xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear6xx_clk_init(); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 6a113a9bb87..9077aaa398d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,40 +63,15 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform -config MACH_KAEN - bool "Kaen board" - depends on ARCH_TEGRA_2x_SOC - select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC - help - Support for the Kaen version of Seaboard - config MACH_PAZ00 bool "Paz00 board" depends on ARCH_TEGRA_2x_SOC help Support for the Toshiba AC100/Dynabook AZ netbook -config MACH_SEABOARD - bool "Seaboard board" - depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC - help - Support for nVidia Seaboard development platform. It will - also be included for some of the derivative boards that - have large similarities with the seaboard design. - -config MACH_TEGRA_DT - bool "Generic Tegra20 board (FDT support)" - depends on ARCH_TEGRA_2x_SOC - select USE_OF - help - Support for generic NVIDIA Tegra20 boards using Flattened Device Tree - config MACH_TRIMSLICE bool "TrimSlice board" depends on ARCH_TEGRA_2x_SOC @@ -104,20 +79,6 @@ config MACH_TRIMSLICE help Support for CompuLab TrimSlice platform -config MACH_WARIO - bool "Wario board" - depends on ARCH_TEGRA_2x_SOC - select MACH_SEABOARD - help - Support for the Wario version of Seaboard - -config MACH_VENTANA - bool "Ventana board" - depends on ARCH_TEGRA_2x_SOC - select MACH_TEGRA_DT - help - Support for the nVidia Ventana development platform - choice prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 2eb4445ddb1..c3d7303b9ac 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,21 +8,24 @@ obj-y += timer.o obj-y += fuse.o obj-y += pmc.o obj-y += flowctrl.o +obj-y += powergate.o +obj-y += apbio.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o +obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o + obj-$(CONFIG_MACH_HARMONY) += board-harmony.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o @@ -31,14 +34,5 @@ obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o obj-$(CONFIG_MACH_PAZ00) += board-paz00.o obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o -obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o -obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o - -obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o - obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 9a82094092d..7a1bb62ddcf 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -2,9 +2,10 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 -dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb -dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb -dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb -dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb -dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index e75451e517b..dc0fe389be5 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -15,6 +15,9 @@ #include <linux/kernel.h> #include <linux/io.h> +#include <mach/iomap.h> +#include <linux/of.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/completion.h> @@ -22,17 +25,21 @@ #include <linux/mutex.h> #include <mach/dma.h> -#include <mach/iomap.h> #include "apbio.h" +#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA) static DEFINE_MUTEX(tegra_apb_dma_lock); - -static struct tegra_dma_channel *tegra_apb_dma; static u32 *tegra_apb_bb; static dma_addr_t tegra_apb_bb_phys; static DECLARE_COMPLETION(tegra_apb_wait); +static u32 tegra_apb_readl_direct(unsigned long offset); +static void tegra_apb_writel_direct(u32 value, unsigned long offset); + +#if defined(CONFIG_TEGRA_SYSTEM_DMA) +static struct tegra_dma_channel *tegra_apb_dma; + bool tegra_apb_init(void) { struct tegra_dma_channel *ch; @@ -72,13 +79,13 @@ static void apb_dma_complete(struct tegra_dma_req *req) complete(&tegra_apb_wait); } -u32 tegra_apb_readl(unsigned long offset) +static u32 tegra_apb_readl_using_dma(unsigned long offset) { struct tegra_dma_req req; int ret; if (!tegra_apb_dma && !tegra_apb_init()) - return readl(IO_TO_VIRT(offset)); + return tegra_apb_readl_direct(offset); mutex_lock(&tegra_apb_dma_lock); req.complete = apb_dma_complete; @@ -108,13 +115,13 @@ u32 tegra_apb_readl(unsigned long offset) return *((u32 *)tegra_apb_bb); } -void tegra_apb_writel(u32 value, unsigned long offset) +static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) { struct tegra_dma_req req; int ret; if (!tegra_apb_dma && !tegra_apb_init()) { - writel(value, IO_TO_VIRT(offset)); + tegra_apb_writel_direct(value, offset); return; } @@ -143,3 +150,176 @@ void tegra_apb_writel(u32 value, unsigned long offset) mutex_unlock(&tegra_apb_dma_lock); } + +#else +static struct dma_chan *tegra_apb_dma_chan; +static struct dma_slave_config dma_sconfig; + +bool tegra_apb_dma_init(void) +{ + dma_cap_mask_t mask; + + mutex_lock(&tegra_apb_dma_lock); + + /* Check to see if we raced to setup */ + if (tegra_apb_dma_chan) + goto skip_init; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + tegra_apb_dma_chan = dma_request_channel(mask, NULL, NULL); + if (!tegra_apb_dma_chan) { + /* + * This is common until the device is probed, so don't + * shout about it. + */ + pr_debug("%s: can not allocate dma channel\n", __func__); + goto err_dma_alloc; + } + + tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32), + &tegra_apb_bb_phys, GFP_KERNEL); + if (!tegra_apb_bb) { + pr_err("%s: can not allocate bounce buffer\n", __func__); + goto err_buff_alloc; + } + + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR; + dma_sconfig.src_maxburst = 1; + dma_sconfig.dst_maxburst = 1; + +skip_init: + mutex_unlock(&tegra_apb_dma_lock); + return true; + +err_buff_alloc: + dma_release_channel(tegra_apb_dma_chan); + tegra_apb_dma_chan = NULL; + +err_dma_alloc: + mutex_unlock(&tegra_apb_dma_lock); + return false; +} + +static void apb_dma_complete(void *args) +{ + complete(&tegra_apb_wait); +} + +static int do_dma_transfer(unsigned long apb_add, + enum dma_transfer_direction dir) +{ + struct dma_async_tx_descriptor *dma_desc; + int ret; + + if (dir == DMA_DEV_TO_MEM) + dma_sconfig.src_addr = apb_add; + else + dma_sconfig.dst_addr = apb_add; + + ret = dmaengine_slave_config(tegra_apb_dma_chan, &dma_sconfig); + if (ret) + return ret; + + dma_desc = dmaengine_prep_slave_single(tegra_apb_dma_chan, + tegra_apb_bb_phys, sizeof(u32), dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!dma_desc) + return -EINVAL; + + dma_desc->callback = apb_dma_complete; + dma_desc->callback_param = NULL; + + INIT_COMPLETION(tegra_apb_wait); + + dmaengine_submit(dma_desc); + dma_async_issue_pending(tegra_apb_dma_chan); + ret = wait_for_completion_timeout(&tegra_apb_wait, + msecs_to_jiffies(50)); + + if (WARN(ret == 0, "apb read dma timed out")) { + dmaengine_terminate_all(tegra_apb_dma_chan); + return -EFAULT; + } + return 0; +} + +static u32 tegra_apb_readl_using_dma(unsigned long offset) +{ + int ret; + + if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) + return tegra_apb_readl_direct(offset); + + mutex_lock(&tegra_apb_dma_lock); + ret = do_dma_transfer(offset, DMA_DEV_TO_MEM); + if (ret < 0) { + pr_err("error in reading offset 0x%08lx using dma\n", offset); + *(u32 *)tegra_apb_bb = 0; + } + mutex_unlock(&tegra_apb_dma_lock); + return *((u32 *)tegra_apb_bb); +} + +static void tegra_apb_writel_using_dma(u32 value, unsigned long offset) +{ + int ret; + + if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) { + tegra_apb_writel_direct(value, offset); + return; + } + + mutex_lock(&tegra_apb_dma_lock); + *((u32 *)tegra_apb_bb) = value; + ret = do_dma_transfer(offset, DMA_MEM_TO_DEV); + if (ret < 0) + pr_err("error in writing offset 0x%08lx using dma\n", offset); + mutex_unlock(&tegra_apb_dma_lock); +} +#endif +#else +#define tegra_apb_readl_using_dma tegra_apb_readl_direct +#define tegra_apb_writel_using_dma tegra_apb_writel_direct +#endif + +typedef u32 (*apbio_read_fptr)(unsigned long offset); +typedef void (*apbio_write_fptr)(u32 value, unsigned long offset); + +static apbio_read_fptr apbio_read; +static apbio_write_fptr apbio_write; + +static u32 tegra_apb_readl_direct(unsigned long offset) +{ + return readl(IO_TO_VIRT(offset)); +} + +static void tegra_apb_writel_direct(u32 value, unsigned long offset) +{ + writel(value, IO_TO_VIRT(offset)); +} + +void tegra_apb_io_init(void) +{ + /* Need to use dma only when it is Tegra20 based platform */ + if (of_machine_is_compatible("nvidia,tegra20") || + !of_have_populated_dt()) { + apbio_read = tegra_apb_readl_using_dma; + apbio_write = tegra_apb_writel_using_dma; + } else { + apbio_read = tegra_apb_readl_direct; + apbio_write = tegra_apb_writel_direct; + } +} + +u32 tegra_apb_readl(unsigned long offset) +{ + return apbio_read(offset); +} + +void tegra_apb_writel(u32 value, unsigned long offset) +{ + apbio_write(value, offset); +} diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h index 8b49e8c89a6..f05d71c303c 100644 --- a/arch/arm/mach-tegra/apbio.h +++ b/arch/arm/mach-tegra/apbio.h @@ -16,24 +16,7 @@ #ifndef __MACH_TEGRA_APBIO_H #define __MACH_TEGRA_APBIO_H -#ifdef CONFIG_TEGRA_SYSTEM_DMA - +void tegra_apb_io_init(void); u32 tegra_apb_readl(unsigned long offset); void tegra_apb_writel(u32 value, unsigned long offset); - -#else -#include <asm/io.h> -#include <mach/io.h> - -static inline u32 tegra_apb_readl(unsigned long offset) -{ - return readl(IO_TO_VIRT(offset)); -} - -static inline void tegra_apb_writel(u32 value, unsigned long offset) -{ - writel(value, IO_TO_VIRT(offset)); -} -#endif - #endif diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index eb7249db50a..c0999633a9a 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -64,6 +64,8 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci2_pdata), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", &tegra_ehci3_pdata), + OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), {} }; @@ -81,11 +83,6 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { NULL, NULL, 0, 0}, }; -static struct of_device_id tegra_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - {} -}; - static void __init tegra_dt_init(void) { tegra_clk_init_from_table(tegra_dt_clk_init_table); @@ -94,10 +91,74 @@ static void __init tegra_dt_init(void) * Finished with the static registrations now; fill in the missing * devices */ - of_platform_populate(NULL, tegra_dt_match_table, + of_platform_populate(NULL, of_default_bus_match_table, tegra20_auxdata_lookup, NULL); } +#ifdef CONFIG_MACH_TRIMSLICE +static void __init trimslice_init(void) +{ + int ret; + + ret = tegra_pcie_init(true, true); + if (ret) + pr_err("tegra_pci_init() failed: %d\n", ret); +} +#endif + +#ifdef CONFIG_MACH_HARMONY +static void __init harmony_init(void) +{ + int ret; + + ret = harmony_regulator_init(); + if (ret) { + pr_err("harmony_regulator_init() failed: %d\n", ret); + return; + } + + ret = harmony_pcie_init(); + if (ret) + pr_err("harmony_pcie_init() failed: %d\n", ret); +} +#endif + +#ifdef CONFIG_MACH_PAZ00 +static void __init paz00_init(void) +{ + tegra_paz00_wifikill_init(); +} +#endif + +static struct { + char *machine; + void (*init)(void); +} board_init_funcs[] = { +#ifdef CONFIG_MACH_TRIMSLICE + { "compulab,trimslice", trimslice_init }, +#endif +#ifdef CONFIG_MACH_HARMONY + { "nvidia,harmony", harmony_init }, +#endif +#ifdef CONFIG_MACH_PAZ00 + { "compal,paz00", paz00_init }, +#endif +}; + +static void __init tegra_dt_init_late(void) +{ + int i; + + tegra_init_late(); + + for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { + if (of_machine_is_compatible(board_init_funcs[i].machine)) { + board_init_funcs[i].init(); + break; + } + } +} + static const char *tegra20_dt_board_compat[] = { "nvidia,tegra20", NULL @@ -110,7 +171,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_dt_init, - .init_late = tegra_init_late, + .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, .dt_compat = tegra20_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 4f76fa7a5da..53bf60f1158 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -33,14 +33,11 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <mach/iomap.h> + #include "board.h" #include "clock.h" -static struct of_device_id tegra_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - {} -}; - struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL), @@ -52,6 +49,8 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), {} }; @@ -74,7 +73,7 @@ static void __init tegra30_dt_init(void) { tegra_clk_init_from_table(tegra_dt_clk_init_table); - of_platform_populate(NULL, tegra_dt_match_table, + of_platform_populate(NULL, of_default_bus_match_table, tegra30_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 33c4fedab84..e8c3fda9bec 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -27,14 +27,11 @@ #ifdef CONFIG_TEGRA_PCI -static int __init harmony_pcie_init(void) +int __init harmony_pcie_init(void) { struct regulator *regulator = NULL; int err; - if (!machine_is_harmony()) - return 0; - err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); if (err) return err; @@ -62,7 +59,15 @@ err_reg: return err; } +static int __init harmony_pcie_initcall(void) +{ + if (!machine_is_harmony()) + return 0; + + return harmony_pcie_init(); +} + /* PCI should be initialized after I2C, mfd and regulators */ -subsys_initcall_sync(harmony_pcie_init); +subsys_initcall_sync(harmony_pcie_initcall); #endif diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 82f32300796..8fd387bf31f 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -19,7 +19,12 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/mfd/tps6586x.h> +#include <linux/of.h> +#include <linux/of_i2c.h> + +#include <asm/mach-types.h> #include <mach/irqs.h> @@ -30,7 +35,9 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = { }; static struct regulator_init_data ldo0_data = { + .supply_regulator = "vdd_sm2", .constraints = { + .name = "vdd_ldo0", .min_uV = 3300 * 1000, .max_uV = 3300 * 1000, .valid_modes_mask = (REGULATOR_MODE_NORMAL | @@ -44,9 +51,11 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ static struct regulator_init_data _id##_data = { \ + .supply_regulator = _supply, \ .constraints = { \ + .name = _name, \ .min_uV = (_minmv)*1000, \ .max_uV = (_maxmv)*1000, \ .valid_modes_mask = (REGULATOR_MODE_NORMAL | \ @@ -57,18 +66,18 @@ static struct regulator_init_data ldo0_data = { }, \ } -HARMONY_REGULATOR_INIT(sm0, 725, 1500); -HARMONY_REGULATOR_INIT(sm1, 725, 1500); -HARMONY_REGULATOR_INIT(sm2, 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); #define TPS_REG(_id, _data) \ { \ @@ -110,7 +119,28 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { - i2c_register_board_info(3, harmony_regulators, 1); + if (machine_is_harmony()) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + i2c_register_board_info(3, harmony_regulators, 1); + } else { /* Harmony, booted using device tree */ + struct device_node *np; + struct i2c_adapter *adapter; + + np = of_find_node_by_path("/i2c@7000d000"); + if (np == NULL) { + pr_err("Could not find device_node for DVC I2C\n"); + return -ENODEV; + } + + adapter = of_find_i2c_adapter_by_node(np); + if (!adapter) { + pr_err("Could not find i2c_adapter for DVC I2C\n"); + return -ENODEV; + } + + i2c_new_device(adapter, harmony_regulators); + } return 0; } diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index bbc1907e98a..4b64af5cab2 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -148,7 +148,6 @@ static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device4, &tegra_sdhci_device1, - &wifi_rfkill_device, &leds_gpio, &gpio_keys_device, }; @@ -201,6 +200,11 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .is_8bit = 1, }; +void __init tegra_paz00_wifikill_init(void) +{ + platform_device_register(&wifi_rfkill_device); +} + static void __init tegra_paz00_init(void) { tegra_clk_init_from_table(paz00_clk_init_table); @@ -211,6 +215,7 @@ static void __init tegra_paz00_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); + tegra_paz00_wifikill_init(); paz00_i2c_init(); paz00_usb_init(); diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c deleted file mode 100644 index 11fc8a568c6..00000000000 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2010-2012 NVIDIA Corporation - * Copyright (C) 2011 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> - -#include "board-seaboard.h" -#include "board-pinmux.h" - -static unsigned long seaboard_pincfg_drive_sdio1[] = { - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3), -}; - -static struct pinctrl_map common_map[] = { - TEGRA_MAP_MUXCONF("ata", "ide", none, driven), - TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("atc", "nand", none, driven), - TEGRA_MAP_MUXCONF("atd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven), - TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", none, driven), - TEGRA_MAP_MUXCONF("crtp", "crt", up, tristate), - TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", none, tristate), - TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven), - TEGRA_MAP_MUXCONF("dap2", "dap2", none, driven), - TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate), - TEGRA_MAP_MUXCONF("dap4", "dap4", none, driven), - TEGRA_MAP_MUXCONF("dta", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtb", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtc", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtd", "vi", down, driven), - TEGRA_MAP_MUXCONF("dte", "vi", down, tristate), - TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven), - TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gmb", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven), - TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven), - TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven), - TEGRA_MAP_MUXCONF("gpv", "pcie", none, tristate), - TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven), - TEGRA_MAP_MUXCONF("irrx", "uartb", none, driven), - TEGRA_MAP_MUXCONF("irtx", "uartb", none, driven), - TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven), - TEGRA_MAP_MUXCONF("lcsn", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldc", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm0", "rsvd4", na, driven), - TEGRA_MAP_MUXCONF("lm1", "crt", na, tristate), - TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw1", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsdi", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvp0", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("owc", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven), - TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven), - TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven), - TEGRA_MAP_MUXCONF("sdb", "sdio3", na, driven), - TEGRA_MAP_MUXCONF("sdc", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("sdd", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("sdio1", "sdio1", up, driven), - TEGRA_MAP_MUXCONF("slxa", "pcie", up, tristate), - TEGRA_MAP_MUXCONF("slxd", "spdif", none, driven), - TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven), - TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("spib", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spid", "spi1", none, tristate), - TEGRA_MAP_MUXCONF("spie", "spi1", none, tristate), - TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("uad", "irda", none, driven), - TEGRA_MAP_MUXCONF("uca", "uartc", none, driven), - TEGRA_MAP_MUXCONF("ucb", "uartc", none, driven), - TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven), - TEGRA_MAP_CONF("ck32", none, na), - TEGRA_MAP_CONF("ddrc", none, na), - TEGRA_MAP_CONF("pmca", none, na), - TEGRA_MAP_CONF("pmcb", none, na), - TEGRA_MAP_CONF("pmcc", none, na), - TEGRA_MAP_CONF("pmcd", none, na), - TEGRA_MAP_CONF("pmce", none, na), - TEGRA_MAP_CONF("xm2c", none, na), - TEGRA_MAP_CONF("xm2d", none, na), - TEGRA_MAP_CONF("ls", up, na), - TEGRA_MAP_CONF("lc", up, na), - TEGRA_MAP_CONF("ld17_0", down, na), - TEGRA_MAP_CONF("ld19_18", down, na), - TEGRA_MAP_CONF("ld21_20", down, na), - TEGRA_MAP_CONF("ld23_22", down, na), -}; - -static struct pinctrl_map seaboard_map[] = { - TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven), - TEGRA_MAP_MUXCONF("lpw0", "hdmi", na, driven), - TEGRA_MAP_MUXCONF("lpw2", "hdmi", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("lsck", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("spia", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("spic", "gmi", up, driven), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate), - PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1), -}; - -static struct pinctrl_map ventana_map[] = { - TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("gmd", "sflash", none, tristate), - TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("slxc", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("spia", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spic", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate), -}; - -static struct tegra_board_pinmux_conf common_conf = { - .maps = common_map, - .map_count = ARRAY_SIZE(common_map), -}; - -static struct tegra_board_pinmux_conf seaboard_conf = { - .maps = seaboard_map, - .map_count = ARRAY_SIZE(seaboard_map), -}; - -static struct tegra_board_pinmux_conf ventana_conf = { - .maps = ventana_map, - .map_count = ARRAY_SIZE(ventana_map), -}; - -void seaboard_pinmux_init(void) -{ - tegra_board_pinmux_init(&common_conf, &seaboard_conf); -} - -void ventana_pinmux_init(void) -{ - tegra_board_pinmux_init(&common_conf, &ventana_conf); -} diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c deleted file mode 100644 index 71e9f3fc7fb..00000000000 --- a/arch/arm/mach-tegra/board-seaboard.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (c) 2010, 2011 NVIDIA Corporation. - * Copyright (C) 2010, 2011 Google, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/of_serial.h> -#include <linux/i2c.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_data/tegra_usb.h> - -#include <sound/wm8903.h> - -#include <mach/iomap.h> -#include <mach/irqs.h> -#include <mach/sdhci.h> -#include <mach/tegra_wm8903_pdata.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/hardware/gic.h> - -#include "board.h" -#include "board-seaboard.h" -#include "clock.h" -#include "devices.h" -#include "gpio-names.h" - -static struct plat_serial8250_port debug_uart_platform_data[] = { - { - /* Memory and IRQ filled in before registration */ - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - .flags = 0, - } -}; - -static struct platform_device debug_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = debug_uart_platform_data, - }, -}; - -static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { - /* name parent rate enabled */ - { "uartb", "pll_p", 216000000, true}, - { "uartd", "pll_p", 216000000, true}, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { "usbd", "clk_m", 12000000, true}, - { "usb3", "clk_m", 12000000, true}, - { NULL, NULL, 0, 0}, -}; - -static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { - { - .code = SW_LID, - .gpio = TEGRA_GPIO_LIDSWITCH, - .active_low = 0, - .desc = "Lid", - .type = EV_SW, - .wakeup = 1, - .debounce_interval = 1, - }, - { - .code = KEY_POWER, - .gpio = TEGRA_GPIO_POWERKEY, - .active_low = 1, - .desc = "Power", - .type = EV_KEY, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data seaboard_gpio_keys = { - .buttons = seaboard_gpio_keys_buttons, - .nbuttons = ARRAY_SIZE(seaboard_gpio_keys_buttons), -}; - -static struct platform_device seaboard_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &seaboard_gpio_keys, - } -}; - -static struct tegra_sdhci_platform_data sdhci_pdata1 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata3 = { - .cd_gpio = TEGRA_GPIO_SD2_CD, - .wp_gpio = TEGRA_GPIO_SD2_WP, - .power_gpio = TEGRA_GPIO_SD2_POWER, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, - .is_8bit = 1, -}; - -static struct tegra_wm8903_platform_data seaboard_audio_pdata = { - .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, - .gpio_hp_det = TEGRA_GPIO_HP_DET, - .gpio_hp_mute = -1, - .gpio_int_mic_en = -1, - .gpio_ext_mic_en = -1, -}; - -static struct platform_device seaboard_audio_device = { - .name = "tegra-snd-wm8903", - .id = 0, - .dev = { - .platform_data = &seaboard_audio_pdata, - }, -}; - -static struct platform_device *seaboard_devices[] __initdata = { - &debug_uart, - &tegra_pmu_device, - &tegra_sdhci_device4, - &tegra_sdhci_device3, - &tegra_sdhci_device1, - &seaboard_gpio_keys_device, - &tegra_i2s_device1, - &tegra_das_device, - &seaboard_audio_device, -}; - -static struct i2c_board_info __initdata isl29018_device = { - I2C_BOARD_INFO("isl29018", 0x44), -}; - -static struct i2c_board_info __initdata adt7461_device = { - I2C_BOARD_INFO("adt7461", 0x4c), -}; - -static struct wm8903_platform_data wm8903_pdata = { - .irq_active_low = 0, - .micdet_cfg = 0, - .micdet_delay = 100, - .gpio_base = SEABOARD_GPIO_WM8903(0), - .gpio_cfg = { - 0, - 0, - WM8903_GPIO_CONFIG_ZERO, - 0, - 0, - }, -}; - -static struct i2c_board_info __initdata wm8903_device = { - I2C_BOARD_INFO("wm8903", 0x1a), - .platform_data = &wm8903_pdata, -}; - -static int seaboard_ehci_init(void) -{ - struct tegra_ehci_platform_data *pdata; - - pdata = tegra_ehci1_device.dev.platform_data; - pdata->vbus_gpio = TEGRA_GPIO_USB1; - - platform_device_register(&tegra_ehci1_device); - platform_device_register(&tegra_ehci3_device); - - return 0; -} - -static void __init seaboard_i2c_init(void) -{ - isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ); - i2c_register_board_info(0, &isl29018_device, 1); - - wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ); - i2c_register_board_info(0, &wm8903_device, 1); - - i2c_register_board_info(3, &adt7461_device, 1); - - platform_device_register(&tegra_i2c_device1); - platform_device_register(&tegra_i2c_device2); - platform_device_register(&tegra_i2c_device3); - platform_device_register(&tegra_i2c_device4); -} - -static void __init seaboard_common_init(void) -{ - seaboard_pinmux_init(); - - tegra_clk_init_from_table(seaboard_clk_init_table); - - tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3; - tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; - - platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices)); - - seaboard_ehci_init(); -} - -static void __init tegra_seaboard_init(void) -{ - /* Seaboard uses UARTD for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE; - debug_uart_platform_data[0].irq = INT_UARTD; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - -static void __init tegra_kaen_init(void) -{ - /* Kaen uses UARTB for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; - debug_uart_platform_data[0].irq = INT_UARTB; - - seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - -static void __init tegra_wario_init(void) -{ - /* Wario uses UARTB for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; - debug_uart_platform_data[0].irq = INT_UARTB; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - - -MACHINE_START(SEABOARD, "seaboard") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_seaboard_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END - -MACHINE_START(KAEN, "kaen") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_kaen_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END - -MACHINE_START(WARIO, "wario") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_wario_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h deleted file mode 100644 index 4c45d4ca3c4..00000000000 --- a/arch/arm/mach-tegra/board-seaboard.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-tegra/board-seaboard.h - * - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_BOARD_SEABOARD_H -#define _MACH_TEGRA_BOARD_SEABOARD_H - -#include <mach/gpio-tegra.h> - -#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) -#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_)) - -#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 -#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 -#define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7 -#define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0 -#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2 -#define TEGRA_GPIO_BACKLIGHT TEGRA_GPIO_PD4 -#define TEGRA_GPIO_LVDS_SHUTDOWN TEGRA_GPIO_PB2 -#define TEGRA_GPIO_BACKLIGHT_PWM TEGRA_GPIO_PU5 -#define TEGRA_GPIO_BACKLIGHT_VDD TEGRA_GPIO_PW0 -#define TEGRA_GPIO_EN_VDD_PNL TEGRA_GPIO_PC6 -#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 -#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 -#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 -#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2) -#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 -#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2) -#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1 -#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5 - -void seaboard_pinmux_init(void); - -#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 65014968fc6..f88e5143c76 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -46,5 +46,14 @@ int __init tegra_powergate_debugfs_init(void); static inline int tegra_powergate_debugfs_init(void) { return 0; } #endif +int __init harmony_regulator_init(void); +#ifdef CONFIG_TEGRA_PCI +int __init harmony_pcie_init(void); +#else +static inline int harmony_pcie_init(void) { return 0; } +#endif + +void __init tegra_paz00_wifikill_init(void); + extern struct sys_timer tegra_timer; #endif diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 204a5c8b0b5..96fef6bcc65 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -33,6 +33,7 @@ #include "clock.h" #include "fuse.h" #include "pmc.h" +#include "apbio.h" /* * Storage for debug-macro.S's state. @@ -127,6 +128,7 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { + tegra_apb_io_init(); tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); @@ -138,6 +140,7 @@ void __init tegra20_init_early(void) #ifdef CONFIG_ARCH_TEGRA_3x_SOC void __init tegra30_init_early(void) { + tegra_apb_io_init(); tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 7a065f0cf63..ceb52db1e2f 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -189,8 +189,8 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) return PTR_ERR(emc_clk); } - clk_enable(emc_clk); - clk_enable(cpu_clk); + clk_prepare_enable(emc_clk); + clk_prepare_enable(cpu_clk); cpufreq_frequency_table_cpuinfo(policy, freq_table); cpufreq_frequency_table_get_attr(freq_table, policy->cpu); @@ -212,7 +212,7 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) static int tegra_cpu_exit(struct cpufreq_policy *policy) { cpufreq_frequency_table_cpuinfo(policy, freq_table); - clk_disable(emc_clk); + clk_disable_unprepare(emc_clk); clk_put(emc_clk); clk_put(cpu_clk); return 0; diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index d83a8c0296f..566e2f88899 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -27,9 +27,9 @@ #include <linux/cpuidle.h> #include <linux/hrtimer.h> -#include <mach/iomap.h> +#include <asm/proc-fns.h> -extern void tegra_cpu_wfi(void); +#include <mach/iomap.h> static int tegra_idle_enter_lp3(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -64,7 +64,7 @@ static int tegra_idle_enter_lp3(struct cpuidle_device *dev, enter = ktime_get(); - tegra_cpu_wfi(); + cpu_do_idle(); exit = ktime_sub(ktime_get(), enter); us = ktime_to_us(exit); diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index abea4f6e2dd..29c5114d607 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -714,13 +714,13 @@ int __init tegra_dma_init(void) bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS); - c = clk_get_sys("tegra-dma", NULL); + c = clk_get_sys("tegra-apbdma", NULL); if (IS_ERR(c)) { pr_err("Unable to get clock for APB DMA\n"); ret = PTR_ERR(c); goto fail; } - ret = clk_enable(c); + ret = clk_prepare_enable(c); if (ret != 0) { pr_err("Unable to enable clock for APB DMA\n"); goto fail; diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index 0e09137506e..d3ad5150d66 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -723,9 +723,9 @@ static int tegra_pcie_power_regate(void) tegra_pcie_xclk_clamp(false); - clk_enable(tegra_pcie.afi_clk); - clk_enable(tegra_pcie.pex_clk); - return clk_enable(tegra_pcie.pll_e); + clk_prepare_enable(tegra_pcie.afi_clk); + clk_prepare_enable(tegra_pcie.pex_clk); + return clk_prepare_enable(tegra_pcie.pll_e); } static int tegra_pcie_clocks_get(void) diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index f5b12fb4ff1..15d506501cc 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -146,7 +146,7 @@ int tegra_powergate_sequence_power_up(int id, struct clk *clk) if (ret) goto err_power; - ret = clk_enable(clk); + ret = clk_prepare_enable(clk); if (ret) goto err_clk; @@ -162,7 +162,7 @@ int tegra_powergate_sequence_power_up(int id, struct clk *clk) return 0; err_clamp: - clk_disable(clk); + clk_disable_unprepare(clk); err_clk: tegra_powergate_power_off(id); err_power: diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5b20197bae7..d29b156a801 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -62,32 +62,3 @@ movw \reg, #:lower16:\val movt \reg, #:upper16:\val .endm - -/* - * tegra_cpu_wfi - * - * puts current CPU in clock-gated wfi using the flow controller - * - * corrupts r0-r3 - * must be called with MMU on - */ - -ENTRY(tegra_cpu_wfi) - cpu_id r0 - cpu_to_halt_reg r1, r0 - cpu_to_csr_reg r2, r0 - mov32 r0, TEGRA_FLOW_CTRL_VIRT - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME - str r3, [r0, r1] @ put flow controller in wait irq mode - dsb - wfi - mov r3, #0 - str r3, [r0, r1] @ clear flow controller halt status - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - dsb - mov pc, lr -ENDPROC(tegra_cpu_wfi) - diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index b59315ce369..a703844b206 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -69,6 +69,8 @@ #define PERIPH_CLK_SOURCE_MASK (3<<30) #define PERIPH_CLK_SOURCE_SHIFT 30 +#define PERIPH_CLK_SOURCE_PWM_MASK (7<<28) +#define PERIPH_CLK_SOURCE_PWM_SHIFT 28 #define PERIPH_CLK_SOURCE_ENABLE (1<<28) #define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF #define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF @@ -908,9 +910,20 @@ static void tegra2_periph_clk_init(struct clk *c) u32 val = clk_readl(c->reg); const struct clk_mux_sel *mux = NULL; const struct clk_mux_sel *sel; + u32 shift; + u32 mask; + + if (c->flags & MUX_PWM) { + shift = PERIPH_CLK_SOURCE_PWM_SHIFT; + mask = PERIPH_CLK_SOURCE_PWM_MASK; + } else { + shift = PERIPH_CLK_SOURCE_SHIFT; + mask = PERIPH_CLK_SOURCE_MASK; + } + if (c->flags & MUX) { for (sel = c->inputs; sel->input != NULL; sel++) { - if (val >> PERIPH_CLK_SOURCE_SHIFT == sel->value) + if ((val & mask) >> shift == sel->value) mux = sel; } BUG_ON(!mux); @@ -1023,12 +1036,23 @@ static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p) { u32 val; const struct clk_mux_sel *sel; + u32 mask, shift; + pr_debug("%s: %s %s\n", __func__, c->name, p->name); + + if (c->flags & MUX_PWM) { + shift = PERIPH_CLK_SOURCE_PWM_SHIFT; + mask = PERIPH_CLK_SOURCE_PWM_MASK; + } else { + shift = PERIPH_CLK_SOURCE_SHIFT; + mask = PERIPH_CLK_SOURCE_MASK; + } + for (sel = c->inputs; sel->input != NULL; sel++) { if (sel->input == p) { val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_MASK; - val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT; + val &= ~mask; + val |= (sel->value) << shift; if (c->refcnt) clk_enable(p); @@ -2149,14 +2173,14 @@ static struct clk tegra_clk_emc = { } static struct clk tegra_list_clks[] = { - PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), + PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), PERIPH_CLK("i2s1", "tegra20-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("i2s2", "tegra20-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71), - PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71), + PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71 | MUX_PWM), PERIPH_CLK("spi", "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), PERIPH_CLK("xio", "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), PERIPH_CLK("twc", "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), @@ -2189,11 +2213,11 @@ static struct clk tegra_list_clks[] = { PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), - PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX), PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */ PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("vi", "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ @@ -2245,20 +2269,16 @@ static struct clk tegra_list_clks[] = { * table under two names. */ static struct clk_duplicate tegra_clk_duplicates[] = { - CLK_DUPLICATE("uarta", "tegra_uart.0", NULL), - CLK_DUPLICATE("uartb", "tegra_uart.1", NULL), - CLK_DUPLICATE("uartc", "tegra_uart.2", NULL), - CLK_DUPLICATE("uartd", "tegra_uart.3", NULL), - CLK_DUPLICATE("uarte", "tegra_uart.4", NULL), + CLK_DUPLICATE("uarta", "serial8250.0", NULL), + CLK_DUPLICATE("uartb", "serial8250.1", NULL), + CLK_DUPLICATE("uartc", "serial8250.2", NULL), + CLK_DUPLICATE("uartd", "serial8250.3", NULL), + CLK_DUPLICATE("uarte", "serial8250.4", NULL), CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), - CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL), CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index e33fe4b14a2..6674f100e16 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -2871,7 +2871,7 @@ static struct clk tegra30_clk_twd = { }, \ } struct clk tegra_list_clks[] = { - PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("apbdma", "tegra-apbdma", NULL, 34, 0, 26000000, mux_clk_m, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB), PERIPH_CLK("kbc", "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), @@ -2886,7 +2886,7 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("i2s4", "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), PERIPH_CLK("spdif_out", "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB), PERIPH_CLK("spdif_in", "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB), - PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB), + PERIPH_CLK("pwm", "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB), PERIPH_CLK("d_audio", "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("dam0", "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("dam1", "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71), @@ -2924,16 +2924,11 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), PERIPH_CLK("i2c4", "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), PERIPH_CLK("i2c5", "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB), - PERIPH_CLK("uarta", "tegra_uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartb", "tegra_uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartc", "tegra_uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartd", "tegra_uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uarte", "tegra_uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uarta_dbg", "serial8250.0", "uarta", 6, 0x178, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartb_dbg", "serial8250.0", "uartb", 7, 0x17c, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartc_dbg", "serial8250.0", "uartc", 55, 0x1a0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uartd_dbg", "serial8250.0", "uartd", 65, 0x1c0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), - PERIPH_CLK("uarte_dbg", "serial8250.0", "uarte", 66, 0x1c4, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uarta", "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartb", "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartc", "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uartd", "tegra-uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), + PERIPH_CLK("uarte", "tegra-uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB), PERIPH_CLK_EX("vi", "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT, &tegra_vi_clk_ops), PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET), PERIPH_CLK("3d2", "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET), @@ -2983,6 +2978,11 @@ struct clk tegra_list_clks[] = { * table under two names. */ struct clk_duplicate tegra_clk_duplicates[] = { + CLK_DUPLICATE("uarta", "serial8250.0", NULL), + CLK_DUPLICATE("uartb", "serial8250.1", NULL), + CLK_DUPLICATE("uartc", "serial8250.2", NULL), + CLK_DUPLICATE("uartd", "serial8250.3", NULL), + CLK_DUPLICATE("uarte", "serial8250.4", NULL), CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), @@ -2990,10 +2990,6 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), - CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL), - CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL), CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), CLK_DUPLICATE("bsev", "nvavp", "bsev"), CLK_DUPLICATE("vde", "tegra-aes", "vde"), diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 315672c7bd4..57b5bdc13b9 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -189,7 +189,7 @@ static void __init tegra_init_timer(void) " Assuming 12Mhz input clock.\n"); rate = 12000000; } else { - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); } @@ -201,7 +201,7 @@ static void __init tegra_init_timer(void) if (IS_ERR(clk)) pr_warn("Unable to get rtc-tegra clock\n"); else - clk_enable(clk); + clk_prepare_enable(clk); switch (rate) { case 12000000: diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index 54e353c8e30..022b33a05c3 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -247,7 +247,7 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy) unsigned long val, flags; void __iomem *base = phy->pad_regs; - clk_enable(phy->pad_clk); + clk_prepare_enable(phy->pad_clk); spin_lock_irqsave(&utmip_pad_lock, flags); @@ -259,7 +259,7 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy) spin_unlock_irqrestore(&utmip_pad_lock, flags); - clk_disable(phy->pad_clk); + clk_disable_unprepare(phy->pad_clk); } static int utmip_pad_power_off(struct tegra_usb_phy *phy) @@ -272,7 +272,7 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy) return -EINVAL; } - clk_enable(phy->pad_clk); + clk_prepare_enable(phy->pad_clk); spin_lock_irqsave(&utmip_pad_lock, flags); @@ -284,7 +284,7 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy) spin_unlock_irqrestore(&utmip_pad_lock, flags); - clk_disable(phy->pad_clk); + clk_disable_unprepare(phy->pad_clk); return 0; } @@ -580,7 +580,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) msleep(5); gpio_direction_output(config->reset_gpio, 1); - clk_enable(phy->clk); + clk_prepare_enable(phy->clk); msleep(1); val = readl(base + USB_SUSP_CTRL); @@ -689,7 +689,7 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, err = PTR_ERR(phy->pll_u); goto err0; } - clk_enable(phy->pll_u); + clk_prepare_enable(phy->pll_u); parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { @@ -735,7 +735,7 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, return phy; err1: - clk_disable(phy->pll_u); + clk_disable_unprepare(phy->pll_u); clk_put(phy->pll_u); err0: kfree(phy); @@ -810,7 +810,7 @@ void tegra_usb_phy_close(struct tegra_usb_phy *phy) clk_put(phy->clk); else utmip_pad_close(phy); - clk_disable(phy->pll_u); + clk_disable_unprepare(phy->pll_u); clk_put(phy->pll_u); kfree(phy); } diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fd3a5c382f4..7e47d37aeb0 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o +obj-y := core.o timer.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c deleted file mode 100644 index 5535dd0a78c..00000000000 --- a/arch/arm/mach-u300/clock.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* - * - * arch/arm/mach-u300/clock.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Define clocks in the app platform. - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/debugfs.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/seq_file.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/syscon.h> - -#include "clock.h" - -/* - * TODO: - * - move all handling of the CCR register into this file and create - * a spinlock for the CCR register - * - switch to the clkdevice lookup mechanism that maps clocks to - * device ID:s instead when it becomes available in kernel 2.6.29. - * - implement rate get/set for all clocks that need it. - */ - -/* - * Syscon clock I/O registers lock so clock requests don't collide - * NOTE: this is a local lock only used to lock access to clock and - * reset registers in syscon. - */ -static DEFINE_SPINLOCK(syscon_clkreg_lock); -static DEFINE_SPINLOCK(syscon_resetreg_lock); - -/* - * The clocking hierarchy currently looks like this. - * NOTE: the idea is NOT to show how the clocks are routed on the chip! - * The ideas is to show dependencies, so a clock higher up in the - * hierarchy has to be on in order for another clock to be on. Now, - * both CPU and DMA can actually be on top of the hierarchy, and that - * is not modeled currently. Instead we have the backbone AMBA bus on - * top. This bus cannot be programmed in any way but conceptually it - * needs to be active for the bridges and devices to transport data. - * - * Please be aware that a few clocks are hw controlled, which mean that - * the hw itself can turn on/off or change the rate of the clock when - * needed! - * - * AMBA bus - * | - * +- CPU - * +- FSMC NANDIF NAND Flash interface - * +- SEMI Shared Memory interface - * +- ISP Image Signal Processor (U335 only) - * +- CDS (U335 only) - * +- DMA Direct Memory Access Controller - * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) - * +- APEX - * +- VIDEO_ENC AVE2/3 Video Encoder - * +- XGAM Graphics Accelerator Controller - * +- AHB - * | - * +- ahb:0 AHB Bridge - * | | - * | +- ahb:1 INTCON Interrupt controller - * | +- ahb:3 MSPRO Memory Stick Pro controller - * | +- ahb:4 EMIF External Memory interface - * | - * +- fast:0 FAST bridge - * | | - * | +- fast:1 MMCSD MMC/SD card reader controller - * | +- fast:2 I2S0 PCM I2S channel 0 controller - * | +- fast:3 I2S1 PCM I2S channel 1 controller - * | +- fast:4 I2C0 I2C channel 0 controller - * | +- fast:5 I2C1 I2C channel 1 controller - * | +- fast:6 SPI SPI controller - * | +- fast:7 UART1 Secondary UART (U335 only) - * | - * +- slow:0 SLOW bridge - * | - * +- slow:1 SYSCON (not possible to control) - * +- slow:2 WDOG Watchdog - * +- slow:3 UART0 primary UART - * +- slow:4 TIMER_APP Application timer - used in Linux - * +- slow:5 KEYPAD controller - * +- slow:6 GPIO controller - * +- slow:7 RTC controller - * +- slow:8 BT Bus Tracer (not used currently) - * +- slow:9 EH Event Handler (not used currently) - * +- slow:a TIMER_ACC Access style timer (not used currently) - * +- slow:b PPM (U335 only, what is that?) - */ - -/* - * Reset control functions. We remember if a block has been - * taken out of reset and don't remove the reset assertion again - * and vice versa. Currently we only remove resets so the - * enablement function is defined out. - */ -static void syscon_block_reset_enable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val |= clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = true; -} - -static void syscon_block_reset_disable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val &= ~clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = false; -} - -int __clk_get(struct clk *clk) -{ - u16 val; - - /* The MMC and MSPRO clocks need some special set-up */ - if (!strcmp(clk->name, "MCLK")) { - /* Set default MMC clock divisor to 18.9 MHz */ - writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Disable MSPRO frequency */ - val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - if (!strcmp(clk->name, "MSPRO")) { - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Enable MSPRO frequency */ - val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - return 1; -} -EXPORT_SYMBOL(__clk_get); - -void __clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(__clk_put); - -static void syscon_clk_disable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void syscon_clk_enable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static u16 syscon_clk_get_rate(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); - return val; -} - -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER -static void enable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S0 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void enable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S1 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S1_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S0 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S1 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ - - -static void syscon_clk_rate_set_mclk(unsigned long rate) -{ - u16 val; - u32 reg; - unsigned long iflags; - - switch (rate) { - case 18900000: - val = 0x0054; - break; - case 20800000: - val = 0x0044; - break; - case 23100000: - val = 0x0043; - break; - case 26000000: - val = 0x0033; - break; - case 29700000: - val = 0x0032; - break; - case 34700000: - val = 0x0022; - break; - case 41600000: - val = 0x0021; - break; - case 52000000: - val = 0x0011; - break; - case 104000000: - val = 0x0000; - break; - default: - printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", - rate); - return; - } - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - ~U300_SYSCON_MMF0R_MASK; - writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -void syscon_clk_rate_set_cpuclk(unsigned long rate) -{ - u16 val; - unsigned long iflags; - - switch (rate) { - case 13000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; - break; - case 52000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; - break; - case 104000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; - break; - case 208000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; - break; - default: - return; - } - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & - ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); - -void clk_disable(struct clk *clk) -{ - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount > 0 && !(--clk->usecount)) { - /* some blocks lack clocking registers and cannot be disabled */ - if (clk->disable) - clk->disable(clk); - if (likely((u32)clk->parent)) - clk_disable(clk->parent); - } -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - disable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - disable_i2s1_vcxo(); -#endif - spin_unlock_irqrestore(&clk->lock, iflags); -} -EXPORT_SYMBOL(clk_disable); - -int clk_enable(struct clk *clk) -{ - int ret = 0; - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) - ret = clk_enable(clk->parent); - - if (unlikely(ret != 0)) - clk->usecount--; - else { - /* remove reset line (we never enable reset again) */ - syscon_block_reset_disable(clk); - /* clocks without enable function are always on */ - if (clk->enable) - clk->enable(clk); -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - enable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - enable_i2s1_vcxo(); -#endif - } - } - spin_unlock_irqrestore(&clk->lock, iflags); - return ret; - -} -EXPORT_SYMBOL(clk_enable); - -/* Returns the clock rate in Hz */ -static unsigned long clk_get_rate_cpuclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - return 104000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 208000000; - default: - break; - } - return clk->rate; -} - -static unsigned long clk_get_rate_ahb_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_emif_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 104000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_xgamclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_mclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - /* - * Here, the 208 MHz PLL gets shut down and the always - * on 13 MHz PLL used for RTC etc kicks into use - * instead. - */ - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - { - /* - * This clock is under program control. The register is - * divided in two nybbles, bit 7-4 gives cycles-1 to count - * high, bit 3-0 gives cycles-1 to count low. Distribute - * these with no more than 1 cycle difference between - * low and high and add low and high to get the actual - * divisor. The base PLL is 208 MHz. Writing 0x00 will - * divide by 1 and 1 so the highest frequency possible - * is 104 MHz. - * - * e.g. 0x54 => - * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz - */ - u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - U300_SYSCON_MMF0R_MASK; - switch (val) { - case 0x0054: - return 18900000; - case 0x0044: - return 20800000; - case 0x0043: - return 23100000; - case 0x0033: - return 26000000; - case 0x0032: - return 29700000; - case 0x0022: - return 34700000; - case 0x0021: - return 41600000; - case 0x0011: - return 52000000; - case 0x0000: - return 104000000; - default: - break; - } - } - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 26000000; - default: - break; - } - - return clk->rate; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk->get_rate) - return clk->get_rate(clk); - else - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 18900000) - return 18900000; - if (rate <= 20800000) - return 20800000; - if (rate <= 23100000) - return 23100000; - if (rate <= 26000000) - return 26000000; - if (rate <= 29700000) - return 29700000; - if (rate <= 34700000) - return 34700000; - if (rate <= 41600000) - return 41600000; - if (rate <= 52000000) - return 52000000; - return -EINVAL; -} - -static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 13000000) - return 13000000; - if (rate <= 52000000) - return 52000000; - if (rate <= 104000000) - return 104000000; - if (rate <= 208000000) - return 208000000; - return -EINVAL; -} - -/* - * This adjusts a requested rate to the closest exact rate - * a certain clock can provide. For a fixed clock it's - * mostly clk->rate. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ - /* Else default to fixed value */ - - if (clk->round_rate) { - return (long) clk->round_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to round rate of %s\n", - clk->name); - } - return (long) clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); - return 0; -} - -static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); - return 0; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: set for EMIFCLK and AHBCLK */ - /* Else assume the clock is fixed and fail */ - if (clk->set_rate) { - return clk->set_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", - clk->name, rate); - return -EINVAL; - } -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * Clock definitions. The clock parents are set to respective - * bridge and the clock framework makes sure that the clocks have - * parents activated and are brought out of reset when in use. - * - * Clocks that have hw_ctrld = true are hw controlled, and the hw - * can by itself turn these clocks on and off. - * So in other words, we don't really have to care about them. - */ - -static struct clk amba_clk = { - .name = "AMBA", - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), -}; - -/* - * These blocks are connected directly to the AMBA bus - * with no bridge. - */ - -static struct clk cpu_clk = { - .name = "CPU", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, - .set_rate = clk_set_rate_cpuclk, - .get_rate = clk_get_rate_cpuclk, - .round_rate = clk_round_rate_cpuclk, - .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), -}; - -static struct clk nandif_clk = { - .name = "FSMC", - .parent = &amba_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), -}; - -static struct clk semi_clk = { - .name = "SEMI", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - /* It is not possible to reset SEMI */ - .hw_ctrld = false, - .reset = false, - .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk isp_clk = { - .name = "ISP", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), -}; - -static struct clk cds_clk = { - .name = "CDS", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, - .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), -}; -#endif - -static struct clk dma_clk = { - .name = "DMA", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), -}; - -static struct clk aaif_clk = { - .name = "AAIF", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), -}; - -static struct clk apex_clk = { - .name = "APEX", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), -}; - -static struct clk video_enc_clk = { - .name = "VIDEO_ENC", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = false, - .reset = false, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - /* This has XGAM in the name but refers to the video encoder */ - .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), -}; - -static struct clk xgam_clk = { - .name = "XGAMCLK", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, - .get_rate = clk_get_rate_xgamclk, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), -}; - -/* This clock is used to activate the video encoder */ -static struct clk ahb_clk = { - .name = "AHB", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, /* This one is set to false due to HW bug */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), -}; - - -/* - * Clocks on the AHB bridge - */ - -static struct clk ahb_subsys_clk = { - .name = "AHB_SUBSYS", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), -}; - -static struct clk intcon_clk = { - .name = "INTCON", - .parent = &ahb_subsys_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, - /* INTCON can be reset but not clock-gated */ - .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), - -}; - -static struct clk mspro_clk = { - .name = "MSPRO", - .parent = &ahb_subsys_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), -}; - -static struct clk emif_clk = { - .name = "EMIF", - .parent = &ahb_subsys_clk, - .rate = 104000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_emif_clk, - .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), -}; - - -/* - * Clocks on the FAST bridge - */ -static struct clk fast_clk = { - .name = "FAST_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), -}; - -/* - * The MMCI apb_pclk is hardwired to the same terminal as the - * external MCI clock. Thus this will be referenced twice. - */ -static struct clk mmcsd_clk = { - .name = "MCLK", - .parent = &fast_clk, - .rate = 18900000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, - .get_rate = clk_get_rate_mclk, - .set_rate = clk_set_rate_mclk, - .round_rate = clk_round_rate_mclk, - .disable = syscon_clk_disable, - .enable = syscon_clk_enable, - .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), -}; - -static struct clk i2s0_clk = { - .name = "i2s0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), -}; - -static struct clk i2s1_clk = { - .name = "i2s1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), -}; - -static struct clk i2c0_clk = { - .name = "I2C0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), -}; - -static struct clk i2c1_clk = { - .name = "I2C1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), -}; - -/* - * The SPI apb_pclk is hardwired to the same terminal as the - * external SPI clock. Thus this will be referenced twice. - */ -static struct clk spi_clk = { - .name = "SPI", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk uart1_pclk = { - .name = "UART1_PCLK", - .parent = &fast_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart1_clk = { - .name = "UART1_CLK", - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), -}; -#endif - - -/* - * Clocks on the SLOW bridge - */ -static struct clk slow_clk = { - .name = "SLOW_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, - .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), -}; - -/* TODO: implement SYSCON clock? */ - -static struct clk wdog_clk = { - .name = "WDOG", - .parent = &slow_clk, - .hw_ctrld = false, - .rate = 32768, - .reset = false, - /* This is always on, cannot be enabled/disabled or reset */ - .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), -}; - -static struct clk uart0_pclk = { - .name = "UART0_PCLK", - .parent = &slow_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_UART_RESET_EN, - .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart0_clk = { - .name = "UART0_CLK", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock), -}; - -static struct clk keypad_clk = { - .name = "KEYPAD", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, - .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), -}; - -static struct clk gpio_clk = { - .name = "GPIO", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), -}; - -static struct clk rtc_clk = { - .name = "RTC", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, - /* This clock is always on, cannot be enabled/disabled */ - .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), -}; - -static struct clk bustr_clk = { - .name = "BUSTR", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), -}; - -static struct clk evhist_clk = { - .name = "EVHIST", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_EH_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), -}; - -static struct clk timer_clk = { - .name = "TIMER", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), -}; - -/* - * There is a binary divider in the hardware that divides - * the 13MHz PLL by 13 down to 1 MHz. - */ -static struct clk app_timer_clk = { - .name = "TIMER_APP", - .parent = &slow_clk, - .rate = 1000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk ppm_clk = { - .name = "PPM", - .parent = &slow_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), -}; -#endif - -#define DEF_LOOKUP(devid, clkref) \ - { \ - .dev_id = devid, \ - .clk = clkref, \ - } - -#define DEF_LOOKUP_CON(devid, conid, clkref) \ - { \ - .dev_id = devid, \ - .con_id = conid, \ - .clk = clkref, \ - } - -/* - * Here we only define clocks that are meaningful to - * look up through clockdevice. - */ -static struct clk_lookup lookups[] = { - /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc-nand", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), -#endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("msl", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), - DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), - /* AHB bridge clocks */ - DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), - DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk), - /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), - DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk), - /* - * The .0 and .1 identifiers on these comes from the platform device - * .id field and are assigned when the platform devices are registered. - */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stu300.0", &i2c0_clk), - DEF_LOOKUP("stu300.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), - DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), - DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk), -#endif - /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("coh901327_wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart0_clk), - DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("coh901461-keypad", &keypad_clk), - DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc-coh901331", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), -#endif -}; - -static void __init clk_register(void) -{ - /* Register the lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -/* - * The following makes it possible to view the status (especially - * reference count and reset status) for the clocks in the platform - * by looking into the special file <debugfs>/u300_clocks - */ - -/* A list of all clocks in the platform */ -static struct clk *clks[] = { - /* Top node clock for the AMBA bus */ - &amba_clk, - /* Connected directly to the AMBA bus */ - &cpu_clk, - &nandif_clk, - &semi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &isp_clk, - &cds_clk, -#endif - &dma_clk, - &aaif_clk, - &apex_clk, - &video_enc_clk, - &xgam_clk, - &ahb_clk, - - /* AHB bridge clocks */ - &ahb_subsys_clk, - &intcon_clk, - &mspro_clk, - &emif_clk, - /* FAST bridge clocks */ - &fast_clk, - &mmcsd_clk, - &i2s0_clk, - &i2s1_clk, - &i2c0_clk, - &i2c1_clk, - &spi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &uart1_clk, - &uart1_pclk, -#endif - /* SLOW bridge clocks */ - &slow_clk, - &wdog_clk, - &uart0_clk, - &uart0_pclk, - &app_timer_clk, - &keypad_clk, - &gpio_clk, - &rtc_clk, - &bustr_clk, - &evhist_clk, - &timer_clk, -#ifdef CONFIG_MACH_U300_BS335 - &ppm_clk, -#endif -}; - -static int u300_clocks_show(struct seq_file *s, void *data) -{ - struct clk *clk; - int i; - - seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ - "ACTIVE\tUSERS\tHW CTRL FREQ\n"); - seq_printf(s, "---------------------------------------------" \ - "-----------------------------------------\n"); - for (i = 0; i < ARRAY_SIZE(clks); i++) { - clk = clks[i]; - if (clk != ERR_PTR(-ENOENT)) { - /* Format clock and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", clk->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", clk->dev ? - dev_name(clk->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - if (clk->get_rate || clk->rate != 0) - seq_printf(s, - "%s%s\t%s\t%d\t%s\t%lu Hz\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO ", - clk_get_rate(clk)); - else - seq_printf(s, - "%s%s\t%s\t%d\t%s\t" \ - "(unknown rate)\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO "); - } - } - return 0; -} - -static int u300_clocks_open(struct inode *inode, struct file *file) -{ - return single_open(file, u300_clocks_show, NULL); -} - -static const struct file_operations u300_clocks_operations = { - .open = u300_clocks_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_clk_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, - &u300_clocks_operations); - return 0; -} -/* - * This needs to come in after the core_initcall() for the - * overall clocks, because debugfs is not available until - * the subsystems come up. - */ -module_init(init_clk_read_debugfs); -#endif - -int __init u300_clock_init(void) -{ - u16 val; - - /* - * FIXME: shall all this powermanagement stuff really live here??? - */ - - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); - - /* Power management enable */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); - - clk_register(); - - /* - * Some of these may be on when we boot the system so make sure they - * are turned OFF. - */ - syscon_block_reset_enable(&timer_clk); - timer_clk.disable(&timer_clk); - - /* - * These shall be turned on by default when we boot the system - * so make sure they are ON. (Adding CPU here is a bit too much.) - * These clocks will be claimed by drivers later. - */ - syscon_block_reset_disable(&semi_clk); - syscon_block_reset_disable(&emif_clk); - clk_enable(&semi_clk); - clk_enable(&emif_clk); - - return 0; -} diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h deleted file mode 100644 index 4f50ca8f901..00000000000 --- a/arch/arm/mach-u300/clock.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * Copyright (C) 2007-2009 ST-Ericsson AB - * Adopted to ST-Ericsson U300 platforms by - * Jonas Aaberg <jonas.aberg@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __MACH_CLOCK_H -#define __MACH_CLOCK_H - -#include <linux/clk.h> - -struct clk { - struct list_head node; - struct module *owner; - struct device *dev; - const char *name; - struct clk *parent; - - spinlock_t lock; - unsigned long rate; - bool reset; - __u16 clk_val; - __s8 usecount; - void __iomem * res_reg; - __u16 res_mask; - - bool hw_ctrld; - - void (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long); - unsigned long (*get_rate) (struct clk *); - unsigned long (*round_rate) (struct clk *, unsigned long); - void (*init) (struct clk *); - void (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -int u300_clock_init(void); - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 33339745d43..03acf1883ec 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -30,6 +30,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/clk-u300.h> #include <asm/types.h> #include <asm/setup.h> @@ -44,7 +45,6 @@ #include <mach/dma_channels.h> #include <mach/gpio-u300.h> -#include "clock.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" @@ -1658,12 +1658,20 @@ void __init u300_init_irq(void) int i; /* initialize clocking early, we want to clock the INTCON */ - u300_clock_init(); + u300_clk_init(U300_SYSCON_VBASE); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); /* Clock the interrupt controller */ clk = clk_get_sys("intcon", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); @@ -1811,13 +1819,6 @@ void __init u300_init_devices(void) /* Check what platform we run and print some status information */ u300_init_check_chip(); - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); /* Initialize SPI device with some board specifics */ u300_spi_init(&pl022_device); diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index bc1c7897e82..56ac06d38ec 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -354,7 +354,7 @@ static void __init u300_timer_init(void) /* Clock the interrupt controller */ clk = clk_get_sys("apptimer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); setup_sched_clock(u300_read_sched_clock, 32, rate); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 53d3d46dec1..c013bbf79ca 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,6 +41,7 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 + select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 920251cf834..18ff781cfbe 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -80,7 +80,7 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi0_data = { +struct mmci_platform_data mop500_sdi0_data = { .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, @@ -227,7 +227,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi4_data = { +struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3cb583..8674a890fd1 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -25,6 +26,7 @@ #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> +#include <linux/mfd/abx500/ab8500-codec.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/smsc911x.h> @@ -39,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/gpio-nomadik.h> @@ -58,7 +59,7 @@ static struct gpio_led snowball_led_array[] = { { .name = "user_led", - .default_trigger = "none", + .default_trigger = "heartbeat", .gpio = 142, }, }; @@ -97,6 +98,18 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +/* ab8500-codec */ +static struct ab8500_codec_platform_data ab8500_codec_pdata = { + .amics = { + .mic1_type = AMIC_TYPE_DIFFERENTIAL, + .mic2_type = AMIC_TYPE_DIFFERENTIAL, + .mic1a_micbias = AMIC_MICBIAS_VAMIC1, + .mic1b_micbias = AMIC_MICBIAS_VAMIC1, + .mic2_micbias = AMIC_MICBIAS_VAMIC2 + }, + .ear_cmv = EAR_CMV_0_95V +}; + static struct gpio_keys_button snowball_key_array[] = { { .gpio = 32, @@ -195,24 +208,7 @@ static struct ab8500_platform_data ab8500_platdata = { .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), .gpio = &ab8500_gpio_pdata, -}; - -static struct resource ab8500_resources[] = { - [0] = { - .start = IRQ_DB8500_AB8500, - .end = IRQ_DB8500_AB8500, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device ab8500_device = { - .name = "ab8500-core", - .id = 0, - .dev = { - .platform_data = &ab8500_platdata, - }, - .num_resources = 1, - .resource = ab8500_resources, + .codec = &ab8500_codec_pdata, }; /* @@ -331,43 +327,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ -static struct nmk_i2c_controller u8500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - /* Slave response timeout(ms) */\ - .timeout = t_out, \ - .sm = _sm, \ -} - -/* - * The board uses 4 i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 8 and standard - * mode of operation - */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); - static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(parent, &u8500_i2c0_data); - db8500_add_i2c1(parent, &u8500_i2c1_data); - db8500_add_i2c2(parent, &u8500_i2c2_data); - db8500_add_i2c3(parent, &u8500_i2c3_data); + db8500_add_i2c0(parent, NULL); + db8500_add_i2c1(parent, NULL); + db8500_add_i2c2(parent, NULL); + db8500_add_i2c3(parent, NULL); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -460,7 +425,6 @@ static struct hash_platform_data u8500_hash1_platform_data = { /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, - &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -622,12 +586,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, &snowball_sbnet_dev, - &ab8500_device, -}; - -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, }; static void __init mop500_init_machine(void) @@ -639,9 +597,8 @@ static void __init mop500_init_machine(void) mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; mop500_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); - /* FIXME: parent of ab8500 should be prcmu */ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -674,7 +631,7 @@ static void __init snowball_init_machine(void) int i; snowball_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -706,7 +663,7 @@ static void __init hrefv60_init_machine(void) mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -769,6 +726,11 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), @@ -776,6 +738,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), /* Requires DMA bindings. */ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), /* Requires clock name bindings. */ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), @@ -786,6 +750,13 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; @@ -793,9 +764,6 @@ static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, { .compatible = "stericsson,db8500-prcmu", }, - { .compatible = "stericsson,db8500-prcmu-regulator", }, - { .compatible = "stericsson,ab8500", }, - { .compatible = "stericsson,ab8500-regulator", }, { .compatible = "simple-bus"}, { }, }; @@ -818,8 +786,6 @@ static void __init u8500_init_machine(void) for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; /* automatically probe child nodes of db8500 device */ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); @@ -838,18 +804,6 @@ static void __init u8500_init_machine(void) mop500_uib_init(); - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - /* - * Devices to be DT:ed: - * snowball_led_dev = todo - * snowball_key_dev = todo - * snowball_sbnet_dev = done - * ab8500_device = done - */ - platform_add_devices(snowball_of_platform_devs, - ARRAY_SIZE(snowball_of_platform_devs)); - - snowball_sdi_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -871,7 +825,6 @@ static void __init u8500_init_machine(void) mop500_uib_init(); } - mop500_i2c_init(parent); /* This board has full regulator constraints */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 2f87b25a908..b5bfc1a78b1 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -9,6 +9,7 @@ /* For NOMADIK_NR_GPIO */ #include <mach/irqs.h> +#include <linux/amba/mmci.h> /* Snowball specific GPIO assignments, this board has no GPIO expander */ #define SNOWBALL_ACCEL_INT1_GPIO 163 @@ -78,6 +79,8 @@ struct device; struct i2c_board_info; +extern struct mmci_platform_data mop500_sdi0_data; +extern struct mmci_platform_data mop500_sdi4_data; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 33275eb4c68..db3c52d56ca 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -16,6 +16,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/mfd/abx500/ab8500.h> #include <asm/mach/map.h> #include <asm/pmu.h> @@ -115,7 +116,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) return ret; } -static struct arm_pmu_platdata db8500_pmu_platdata = { +struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; @@ -139,7 +140,6 @@ static struct platform_device *platform_devs[] __initdata = { static struct platform_device *of_platform_devs[] __initdata = { &u8500_dma40_device, - &db8500_pmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { @@ -207,7 +207,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(void) +struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) { struct device *parent; int i; @@ -224,6 +224,8 @@ struct device * __init u8500_init_devices(void) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; + db8500_prcmu_device.dev.platform_data = ab8500; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; @@ -237,7 +239,6 @@ struct device * __init u8500_of_init_devices(void) parent = db8500_soc_device_init(); - db8500_add_rtc(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, @@ -249,7 +250,7 @@ struct device * __init u8500_of_init_devices(void) /* * Devices to be DT:ed: * u8500_dma40_device = todo - * db8500_pmu_device = todo + * db8500_pmu_device = done * db8500_prcmu_device = done */ platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 6e470656026..ecdd8386cff 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -12,7 +12,7 @@ #include <linux/dma-mapping.h> #include <linux/sys_soc.h> #include <linux/amba/bus.h> -#include <plat/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #include <mach/crypto-ux500.h> struct spi_master_cntlr; @@ -56,27 +56,15 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, struct nmk_i2c_controller; -static inline struct platform_device * +static inline struct amba_device * dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, struct nmk_i2c_controller *data) { - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; + /* Conjure a name similar to what the platform device used to have */ + char name[16]; - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "nmk-i2c", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = data, - .size_data = sizeof(*data), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); + snprintf(name, sizeof(name), "nmk-i2c.%d", id); + return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0); } static inline struct amba_device * diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 8b7ed82a286..7914e5eaa9c 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -13,11 +13,12 @@ #include <asm/mach/time.h> #include <linux/init.h> +#include <linux/mfd/abx500/ab8500.h> void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(void); +extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 741e71feca7..66e7f00884a 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -63,8 +63,10 @@ static void __init ux500_timer_init(void) /* TODO: Once MTU has been DT:ed place code above into else. */ if (of_have_populated_dt()) { +#ifdef CONFIG_OF np = of_find_matching_node(NULL, prcmu_timer_of_match); if (!np) +#endif goto dt_fail; tmp_base = of_iomap(np, 0); diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index cf8730d35e7..fc3730f0165 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -2,7 +2,8 @@ menu "Versatile Express platform type" depends on ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA - bool + bool "Enable A5 and A9 only errata work-arounds" + default y select ARM_ERRATA_720789 select ARM_ERRATA_751472 select PL310_ERRATA_753970 if CACHE_PL310 @@ -14,7 +15,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" - select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC select CPU_V7 select HAVE_SMP @@ -22,7 +22,6 @@ config ARCH_VEXPRESS_CA9X4 config ARCH_VEXPRESS_DT bool "Device Tree support for Versatile Express platforms" - select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 909f85ebf5f..318d308dfb9 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -6,4 +6,5 @@ initrd_phys-y := 0x60800000 dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ - vexpress-v2p-ca15-tc1.dtb + vexpress-v2p-ca15-tc1.dtb \ + vexpress-v2p-ca15_a7.dtb diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index c65cc3b462a..61c492403b0 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -66,8 +66,15 @@ static void __init ct_ca9x4_init_irq(void) static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2); + u32 site = v2m_get_master_site(); + + /* + * Old firmware was using the "site" component of the command + * to control the DVI muxer (while it should be always 0 ie. MB). + * Newer firmware uses the data register. Keep both for compatibility. + */ + v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); + v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); } static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) @@ -105,43 +112,11 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { }; -static long ct_round(struct clk *clk, unsigned long rate) -{ - return rate; -} - -static int ct_set(struct clk *clk, unsigned long rate) -{ - return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate); -} - -static const struct clk_ops osc1_clk_ops = { - .round = ct_round, - .set = ct_set, -}; - -static struct clk osc1_clk = { - .ops = &osc1_clk_ops, - .rate = 24000000, -}; - -static struct clk ct_sp804_clk = { - .rate = 1000000, -}; - -static struct clk_lookup lookups[] = { - { /* CLCD */ - .dev_id = "ct:clcd", - .clk = &osc1_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "ct-timer0", - .clk = &ct_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "ct-timer1", - .clk = &ct_sp804_clk, - }, +static struct v2m_osc ct_osc1 = { + .osc = 1, + .rate_min = 10000000, + .rate_max = 80000000, + .rate_default = 23750000, }; static struct resource pmu_resources[] = { @@ -174,14 +149,10 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static void __init ct_ca9x4_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - static void __init ct_ca9x4_init(void) { int i; + struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -193,6 +164,10 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif + ct_osc1.site = v2m_get_master_site(); + clk = v2m_osc_register("ct:osc1", &ct_osc1); + clk_register_clkdev(clk, NULL, "ct:clcd"); + for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); @@ -234,7 +209,6 @@ struct ct_desc ct_ca9x4_desc __initdata = { .id = V2M_CT_ID_CA9, .name = "CA9x4", .map_io = ct_ca9x4_map_io, - .init_early = ct_ca9x4_init_early, .init_irq = ct_ca9x4_init_irq, .init_tile = ct_ca9x4_init, #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h deleted file mode 100644 index 3f8307d73ca..00000000000 --- a/arch/arm/mach-vexpress/include/mach/clkdev.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <plat/clock.h> - -struct clk { - const struct clk_ops *ops; - unsigned long rate; - const struct icst_params *params; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index fa8224794e0..9f509f55d07 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -18,6 +18,8 @@ #define DEBUG_LL_VIRT_BASE 0xf8000000 +#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) + .macro addruart,rp,rv,tmp @ Make an educated guess regarding the memory map: @@ -41,3 +43,42 @@ .endm #include <asm/hardware/debug-pl01x.S> + +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) + + .macro addruart,rp,rv,tmp + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE + .endm + +#include <asm/hardware/debug-pl01x.S> + +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) + + .macro addruart,rp,rv,tmp + mov \rp, #DEBUG_LL_UART_OFFSET_RS1 + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 + .endm + +#include <asm/hardware/debug-pl01x.S> + +#else /* CONFIG_DEBUG_LL_UART_NONE */ + + .macro addruart, rp, rv, tmp + /* Safe dummy values */ + mov \rp, #0 + mov \rv, #DEBUG_LL_VIRT_BASE + .endm + + .macro senduart,rd,rx + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx + .endm + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 31a92890893..1e388c7bf4d 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,6 +1,8 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H +#include <linux/clk-provider.h> + /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -104,9 +106,10 @@ #define SYS_CFG_REBOOT (9 << 20) #define SYS_CFG_DVIMODE (11 << 20) #define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE_MB (0 << 16) -#define SYS_CFG_SITE_DB1 (1 << 16) -#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_SITE(n) ((n) << 16) +#define SYS_CFG_SITE_MB 0 +#define SYS_CFG_SITE_DB1 1 +#define SYS_CFG_SITE_DB2 2 #define SYS_CFG_STACK(n) ((n) << 12) #define SYS_CFG_ERR (1 << 1) @@ -122,6 +125,8 @@ void v2m_flags_set(u32 data); #define SYS_MISC_MASTERSITE (1 << 14) #define SYS_PROCIDx_HBI_MASK 0xfff +int v2m_get_master_site(void); + /* * Core tile IDs */ @@ -144,4 +149,21 @@ struct ct_desc { extern struct ct_desc *ct_desc; +/* + * OSC clock provider + */ +struct v2m_osc { + struct clk_hw hw; + u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ + u8 stack; /* board stack position */ + u16 osc; + unsigned long rate_min; + unsigned long rate_max; + unsigned long rate_default; +}; + +#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) + +struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); + #endif diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h index 7dab5596b86..1e472eb0bbd 100644 --- a/arch/arm/mach-vexpress/include/mach/uncompress.h +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -27,6 +27,7 @@ static unsigned long get_uart_base(void) { +#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) unsigned long mpcore_periph; /* @@ -42,6 +43,13 @@ static unsigned long get_uart_base(void) return UART_BASE; else return UART_BASE_RS1; +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) + return UART_BASE; +#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) + return UART_BASE_RS1; +#else + return 0; +#endif } /* @@ -51,6 +59,9 @@ static inline void putc(int c) { unsigned long base = get_uart_base(); + if (!base) + return; + while (AMBA_UART_FR(base) & (1 << 5)) barrier(); @@ -61,6 +72,9 @@ static inline void flush(void) { unsigned long base = get_uart_base(); + if (!base) + return; + while (AMBA_UART_FR(base) & (1 << 3)) barrier(); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index fde26adaef3..37608f22ee3 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,7 +16,10 @@ #include <linux/spinlock.h> #include <linux/usb/isp1760.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -81,16 +84,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); } -static void __init v2m_timer_init(void) -{ - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); -} - -static struct sys_timer v2m_timer = { - .init = v2m_timer_init, -}; - static DEFINE_SPINLOCK(v2m_cfg_lock); @@ -147,6 +140,13 @@ void __init v2m_flags_set(u32 data) writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); } +int v2m_get_master_site(void) +{ + u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); + + return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; +} + static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, @@ -201,6 +201,11 @@ static struct platform_device v2m_eth_device = { .dev.platform_data = &v2m_eth_config, }; +static struct regulator_consumer_supply v2m_eth_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource v2m_usb_resources[] = { { .start = V2M_ISP1761, @@ -319,98 +324,145 @@ static struct amba_device *v2m_amba_devs[] __initdata = { }; -static long v2m_osc_round(struct clk *clk, unsigned long rate) +static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct v2m_osc *osc = to_v2m_osc(hw); + + return !parent_rate ? osc->rate_default : parent_rate; +} + +static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) { + struct v2m_osc *osc = to_v2m_osc(hw); + + if (WARN_ON(rate < osc->rate_min)) + rate = osc->rate_min; + + if (WARN_ON(rate > osc->rate_max)) + rate = osc->rate_max; + return rate; } -static int v2m_osc1_set(struct clk *clk, unsigned long rate) +static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { - return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); + struct v2m_osc *osc = to_v2m_osc(hw); + + v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | + SYS_CFG_STACK(osc->stack) | osc->osc, rate); + + return 0; } -static const struct clk_ops osc1_clk_ops = { - .round = v2m_osc_round, - .set = v2m_osc1_set, -}; - -static struct clk osc1_clk = { - .ops = &osc1_clk_ops, - .rate = 24000000, -}; - -static struct clk osc2_clk = { - .rate = 24000000, -}; - -static struct clk v2m_sp804_clk = { - .rate = 1000000, -}; - -static struct clk v2m_ref_clk = { - .rate = 32768, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup v2m_lookups[] = { - { /* AMBA bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "mb:uart0", - .clk = &osc2_clk, - }, { /* UART1 */ - .dev_id = "mb:uart1", - .clk = &osc2_clk, - }, { /* UART2 */ - .dev_id = "mb:uart2", - .clk = &osc2_clk, - }, { /* UART3 */ - .dev_id = "mb:uart3", - .clk = &osc2_clk, - }, { /* KMI0 */ - .dev_id = "mb:kmi0", - .clk = &osc2_clk, - }, { /* KMI1 */ - .dev_id = "mb:kmi1", - .clk = &osc2_clk, - }, { /* MMC0 */ - .dev_id = "mb:mmci", - .clk = &osc2_clk, - }, { /* CLCD */ - .dev_id = "mb:clcd", - .clk = &osc1_clk, - }, { /* SP805 WDT */ - .dev_id = "mb:wdt", - .clk = &v2m_ref_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer0", - .clk = &v2m_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer1", - .clk = &v2m_sp804_clk, - }, +static struct clk_ops v2m_osc_ops = { + .recalc_rate = v2m_osc_recalc_rate, + .round_rate = v2m_osc_round_rate, + .set_rate = v2m_osc_set_rate, +}; + +struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) +{ + struct clk_init_data init; + + WARN_ON(osc->site > 2); + WARN_ON(osc->stack > 15); + WARN_ON(osc->osc > 4095); + + init.name = name; + init.ops = &v2m_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + + osc->hw.init = &init; + + return clk_register(NULL, &osc->hw); +} + +static struct v2m_osc v2m_mb_osc1 = { + .site = SYS_CFG_SITE_MB, + .osc = 1, + .rate_min = 23750000, + .rate_max = 63500000, + .rate_default = 23750000, +}; + +static const char *v2m_ref_clk_periphs[] __initconst = { + "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ +}; + +static const char *v2m_osc1_periphs[] __initconst = { + "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ +}; + +static const char *v2m_osc2_periphs[] __initconst = { + "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ + "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ + "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ + "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ + "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ + "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ + "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ +}; + +static void __init v2m_clk_init(void) +{ + struct clk *clk; + int i; + + clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, + CLK_IS_ROOT, 0); + WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); + + clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, + CLK_IS_ROOT, 32768); + for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, + CLK_IS_ROOT, 1000000); + WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); + + clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); + for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, + CLK_IS_ROOT, 24000000); + for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); +} + +static void __init v2m_timer_init(void) +{ + v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); + v2m_clk_init(); + v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); +} + +static struct sys_timer v2m_timer = { + .init = v2m_timer_init, }; static void __init v2m_init_early(void) { - ct_desc->init_early(); - clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + if (ct_desc->init_early) + ct_desc->init_early(); versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); } static void v2m_power_off(void) { - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) + if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) printk(KERN_EMERG "Unable to shutdown\n"); } static void v2m_restart(char str, const char *cmd) { - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) printk(KERN_EMERG "Unable to reboot\n"); } @@ -458,6 +510,9 @@ static void __init v2m_init(void) { int i; + regulator_register_fixed(0, v2m_eth_supplies, + ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -522,77 +577,6 @@ void __init v2m_dt_map_io(void) #endif } -static struct clk_lookup v2m_dt_lookups[] = { - { /* AMBA bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer0", - .clk = &v2m_sp804_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .con_id = "v2m-timer1", - .clk = &v2m_sp804_clk, - }, { /* PL180 MMCI */ - .dev_id = "mb:mmci", /* 10005000.mmci */ - .clk = &osc2_clk, - }, { /* PL050 KMI0 */ - .dev_id = "10006000.kmi", - .clk = &osc2_clk, - }, { /* PL050 KMI1 */ - .dev_id = "10007000.kmi", - .clk = &osc2_clk, - }, { /* PL011 UART0 */ - .dev_id = "10009000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART1 */ - .dev_id = "1000a000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART2 */ - .dev_id = "1000b000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART3 */ - .dev_id = "1000c000.uart", - .clk = &osc2_clk, - }, { /* SP805 WDT */ - .dev_id = "1000f000.wdt", - .clk = &v2m_ref_clk, - }, { /* PL111 CLCD */ - .dev_id = "1001f000.clcd", - .clk = &osc1_clk, - }, - /* RS1 memory map */ - { /* PL180 MMCI */ - .dev_id = "mb:mmci", /* 1c050000.mmci */ - .clk = &osc2_clk, - }, { /* PL050 KMI0 */ - .dev_id = "1c060000.kmi", - .clk = &osc2_clk, - }, { /* PL050 KMI1 */ - .dev_id = "1c070000.kmi", - .clk = &osc2_clk, - }, { /* PL011 UART0 */ - .dev_id = "1c090000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART1 */ - .dev_id = "1c0a0000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART2 */ - .dev_id = "1c0b0000.uart", - .clk = &osc2_clk, - }, { /* PL011 UART3 */ - .dev_id = "1c0c0000.uart", - .clk = &osc2_clk, - }, { /* SP805 WDT */ - .dev_id = "1c0f0000.wdt", - .clk = &v2m_ref_clk, - }, { /* PL111 CLCD */ - .dev_id = "1c1f0000.clcd", - .clk = &osc1_clk, - }, -}; - void __init v2m_dt_init_early(void) { struct device_node *node; @@ -605,8 +589,8 @@ void __init v2m_dt_init_early(void) /* Confirm board type against DT property, if available */ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ? + int site = v2m_get_master_site(); + u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); u32 hbi = id & SYS_PROCIDx_HBI_MASK; @@ -614,8 +598,6 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } - - clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups)); } static struct of_device_id vexpress_irq_match[] __initdata = { @@ -637,6 +619,8 @@ static void __init v2m_dt_timer_init(void) node = of_find_compatible_node(NULL, NULL, "arm,sp810"); v2m_sysctl_init(of_iomap(node, 0)); + v2m_clk_init(); + err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); if (WARN_ON(err)) return; diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 81aedb7c893..7ce51767c99 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1,9 +1,7 @@ -obj-y += devices.o gpio.o irq.o timer.o +obj-y += devices.o gpio.o irq.o timer.o restart.o obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o obj-$(CONFIG_MACH_BV07) += bv07.o obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o - -obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c index a464c758441..f9fbeb2d10e 100644 --- a/arch/arm/mach-vt8500/bv07.c +++ b/arch/arm/mach-vt8500/bv07.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -62,6 +63,7 @@ void __init bv07_init(void) else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); + wmt_setup_restart(); vt8500_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +71,7 @@ void __init bv07_init(void) MACHINE_START(BV07, "Benign BV07 Mini Netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = vt8500_reserve_mem, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h new file mode 100644 index 00000000000..89f9b787d2a --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/restart.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-vt8500/restart.h + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void wmt_setup_restart(void); +void wmt_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h deleted file mode 100644 index 58fa8010ee6..00000000000 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/system.h - * - */ -#include <asm/io.h> - -/* PM Software Reset request register */ -#define VT8500_PMSR_VIRT 0xf8130060 - -static inline void arch_reset(char mode, const char *cmd) -{ - writel(1, VT8500_PMSR_VIRT); -} diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c deleted file mode 100644 index 8ad825e9359..00000000000 --- a/arch/arm/mach-vt8500/pwm.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * arch/arm/mach-vt8500/pwm.c - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/pwm.h> -#include <linux/delay.h> - -#include <asm/div64.h> - -#define VT8500_NR_PWMS 4 - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device { - struct list_head node; - struct platform_device *pdev; - - const char *label; - - void __iomem *regbase; - - unsigned int use_count; - unsigned int pwm_id; -}; - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) -static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) -{ - int loops = msecs_to_loops(10); - while ((readb(reg) & bitmask) && --loops) - cpu_relax(); - - if (unlikely(!loops)) - pr_warning("Waiting for status bits 0x%x to clear timed out\n", - bitmask); -} - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long c; - unsigned long period_cycles, prescale, pv, dc; - - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - c = 25000000/2; /* wild guess --- need to implement clocks */ - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - if (period_cycles < 1) - period_cycles = 1; - prescale = (period_cycles - 1) / 4096; - pv = period_cycles / (prescale + 1) - 1; - if (pv > 4095) - pv = 4095; - - if (prescale > 1023) - return -EINVAL; - - c = (unsigned long long)pv * duty_ns; - do_div(c, period_ns); - dc = c; - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1)); - writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4)); - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2)); - writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4)); - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3)); - writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4)); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); - writel(5, pwm->regbase + (pwm->pwm_id << 4)); - return 0; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); - writel(0, pwm->regbase + (pwm->pwm_id << 4)); -} -EXPORT_SYMBOL(pwm_disable); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else { - pwm = ERR_PTR(-EBUSY); - } - } else { - pwm = ERR_PTR(-ENOENT); - } - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else { - pr_warning("PWM device already freed\n"); - } - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static inline void __add_pwm(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); -} - -static int __devinit pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwms; - struct resource *r; - int ret = 0; - int i; - - pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL); - if (pwms == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - for (i = 0; i < VT8500_NR_PWMS; i++) { - pwms[i].use_count = 0; - pwms[i].pwm_id = i; - pwms[i].pdev = pdev; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free; - } - - pwms[0].regbase = ioremap(r->start, resource_size(r)); - if (pwms[0].regbase == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - for (i = 1; i < VT8500_NR_PWMS; i++) - pwms[i].regbase = pwms[0].regbase; - - for (i = 0; i < VT8500_NR_PWMS; i++) - __add_pwm(&pwms[i]); - - platform_set_drvdata(pdev, pwms); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free: - kfree(pwms); - return ret; -} - -static int __devexit pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwms; - struct resource *r; - int i; - - pwms = platform_get_drvdata(pdev); - if (pwms == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - - for (i = 0; i < VT8500_NR_PWMS; i++) - list_del(&pwms[i].node); - mutex_unlock(&pwm_lock); - - iounmap(pwms[0].regbase); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - kfree(pwms); - return 0; -} - -static struct platform_driver pwm_driver = { - .driver = { - .name = "vt8500-pwm", - .owner = THIS_MODULE, - }, - .probe = pwm_probe, - .remove = __devexit_p(pwm_remove), -}; - -static int __init pwm_init(void) -{ - return platform_driver_register(&pwm_driver); -} -arch_initcall(pwm_init); - -static void __exit pwm_exit(void) -{ - platform_driver_unregister(&pwm_driver); -} -module_exit(pwm_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c new file mode 100644 index 00000000000..497e89a5e13 --- /dev/null +++ b/arch/arm/mach-vt8500/restart.c @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-vt8500/restart.c + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <asm/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define LEGACY_PMC_BASE 0xD8130000 +#define WMT_PRIZM_PMSR_REG 0x60 + +static void __iomem *pmc_base; + +void wmt_setup_restart(void) +{ + struct device_node *np; + + /* + * Check if Power Mgmt Controller node is present in device tree. If no + * device tree node, use the legacy PMSR value (valid for all current + * SoCs). + */ + np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc"); + if (np) { + pmc_base = of_iomap(np, 0); + + if (!pmc_base) + pr_err("%s:of_iomap(pmc) failed\n", __func__); + + of_node_put(np); + } else { + pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); + if (!pmc_base) { + pr_err("%s:ioremap(rstc) failed\n", __func__); + return; + } + } +} + +void wmt_restart(char mode, const char *cmd) +{ + if (pmc_base) + writel(1, pmc_base + WMT_PRIZM_PMSR_REG); +} diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c index cf910a95608..db19886caf7 100644 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -23,6 +23,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/restart.h> #include "devices.h" @@ -61,7 +62,7 @@ void __init wm8505_7in_init(void) pm_power_off = &vt8500_power_off; else printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); - + wmt_setup_restart(); wm8505_set_resources(); platform_add_devices(devices, ARRAY_SIZE(devices)); vt8500_gpio_init(); @@ -69,6 +70,7 @@ void __init wm8505_7in_init(void) MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") .atag_offset = 0x100, + .restart = wmt_restart, .reserve = wm8505_reserve_mem, .map_io = wm8505_map_io, .init_irq = wm8505_init_irq, diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 806cc4f6351..119bc52ab93 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -14,6 +14,7 @@ #include <linux/percpu.h> #include <asm/mmu_context.h> +#include <asm/thread_notify.h> #include <asm/tlbflush.h> static DEFINE_RAW_SPINLOCK(cpu_asid_lock); @@ -48,6 +49,40 @@ void cpu_set_reserved_ttbr0(void) } #endif +#ifdef CONFIG_PID_IN_CONTEXTIDR +static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, + void *t) +{ + u32 contextidr; + pid_t pid; + struct thread_info *thread = t; + + if (cmd != THREAD_NOTIFY_SWITCH) + return NOTIFY_DONE; + + pid = task_pid_nr(thread->task) << ASID_BITS; + asm volatile( + " mrc p15, 0, %0, c13, c0, 1\n" + " bfi %1, %0, #0, %2\n" + " mcr p15, 0, %1, c13, c0, 1\n" + : "=r" (contextidr), "+r" (pid) + : "I" (ASID_BITS)); + isb(); + + return NOTIFY_OK; +} + +static struct notifier_block contextidr_notifier_block = { + .notifier_call = contextidr_notifier, +}; + +static int __init contextidr_notifier_init(void) +{ + return thread_register_notifier(&contextidr_notifier_block); +} +arch_initcall(contextidr_notifier_init); +#endif + /* * We fork()ed a process, and we need a new context for the child * to run in. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4044abcf6f9..c2cdf6500f7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -22,13 +22,14 @@ #include <linux/memblock.h> #include <linux/slab.h> #include <linux/iommu.h> +#include <linux/io.h> #include <linux/vmalloc.h> +#include <linux/sizes.h> #include <asm/memory.h> #include <asm/highmem.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> -#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/dma-iommu.h> #include <asm/mach/map.h> @@ -72,7 +73,7 @@ static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(page, offset, size, dir); return pfn_to_dma(dev, page_to_pfn(page)) + offset; } @@ -95,7 +96,7 @@ static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)), handle & ~PAGE_MASK, size, dir); } @@ -124,6 +125,7 @@ struct dma_map_ops arm_dma_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, + .get_sgtable = arm_dma_get_sgtable, .map_page = arm_dma_map_page, .unmap_page = arm_dma_unmap_page, .map_sg = arm_dma_map_sg, @@ -217,115 +219,70 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU +#ifdef CONFIG_HUGETLB_PAGE +#error ARM Coherent DMA allocator does not (yet) support huge TLB +#endif -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT) - -/* - * These are the page tables (2MB each) covering uncached, DMA consistent allocations - */ -static pte_t **consistent_pte; - -#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M +static void *__alloc_from_contiguous(struct device *dev, size_t size, + pgprot_t prot, struct page **ret_page); -static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; +static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, + pgprot_t prot, struct page **ret_page, + const void *caller); -void __init init_consistent_dma_size(unsigned long size) +static void * +__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { - unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M); + struct vm_struct *area; + unsigned long addr; - BUG_ON(consistent_pte); /* Check we're called before DMA region init */ - BUG_ON(base < VMALLOC_END); + /* + * DMA allocation can be mapped to user space, so lets + * set VM_USERMAP flags too. + */ + area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, + caller); + if (!area) + return NULL; + addr = (unsigned long)area->addr; + area->phys_addr = __pfn_to_phys(page_to_pfn(page)); - /* Grow region to accommodate specified size */ - if (base < consistent_base) - consistent_base = base; + if (ioremap_page_range(addr, addr + size, area->phys_addr, prot)) { + vunmap((void *)addr); + return NULL; + } + return (void *)addr; } -#include "vmregion.h" - -static struct arm_vmregion_head consistent_head = { - .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock), - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_end = CONSISTENT_END, -}; - -#ifdef CONFIG_HUGETLB_PAGE -#error ARM Coherent DMA allocator does not (yet) support huge TLB -#endif - -/* - * Initialise the consistent memory allocation. - */ -static int __init consistent_init(void) +static void __dma_free_remap(void *cpu_addr, size_t size) { - int ret = 0; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - int i = 0; - unsigned long base = consistent_base; - unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT; - - if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) - return 0; - - consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); - if (!consistent_pte) { - pr_err("%s: no memory\n", __func__); - return -ENOMEM; + unsigned int flags = VM_ARM_DMA_CONSISTENT | VM_USERMAP; + struct vm_struct *area = find_vm_area(cpu_addr); + if (!area || (area->flags & flags) != flags) { + WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr); + return; } - - pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END); - consistent_head.vm_start = base; - - do { - pgd = pgd_offset(&init_mm, base); - - pud = pud_alloc(&init_mm, pgd, base); - if (!pud) { - pr_err("%s: no pud tables\n", __func__); - ret = -ENOMEM; - break; - } - - pmd = pmd_alloc(&init_mm, pud, base); - if (!pmd) { - pr_err("%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - WARN_ON(!pmd_none(*pmd)); - - pte = pte_alloc_kernel(pmd, base); - if (!pte) { - pr_err("%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte[i++] = pte; - base += PMD_SIZE; - } while (base < CONSISTENT_END); - - return ret; + unmap_kernel_range((unsigned long)cpu_addr, size); + vunmap(cpu_addr); } -core_initcall(consistent_init); -static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page); - -static struct arm_vmregion_head coherent_head = { - .vm_lock = __SPIN_LOCK_UNLOCKED(&coherent_head.vm_lock), - .vm_list = LIST_HEAD_INIT(coherent_head.vm_list), +struct dma_pool { + size_t size; + spinlock_t lock; + unsigned long *bitmap; + unsigned long nr_pages; + void *vaddr; + struct page *page; }; -static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; +static struct dma_pool atomic_pool = { + .size = SZ_256K, +}; static int __init early_coherent_pool(char *p) { - coherent_pool_size = memparse(p, &p); + atomic_pool.size = memparse(p, &p); return 0; } early_param("coherent_pool", early_coherent_pool); @@ -333,32 +290,45 @@ early_param("coherent_pool", early_coherent_pool); /* * Initialise the coherent pool for atomic allocations. */ -static int __init coherent_init(void) +static int __init atomic_pool_init(void) { + struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); - size_t size = coherent_pool_size; + unsigned long nr_pages = pool->size >> PAGE_SHIFT; + unsigned long *bitmap; struct page *page; void *ptr; + int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); - if (!IS_ENABLED(CONFIG_CMA)) - return 0; + bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!bitmap) + goto no_bitmap; - ptr = __alloc_from_contiguous(NULL, size, prot, &page); + if (IS_ENABLED(CONFIG_CMA)) + ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); + else + ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, + &page, NULL); if (ptr) { - coherent_head.vm_start = (unsigned long) ptr; - coherent_head.vm_end = (unsigned long) ptr + size; - printk(KERN_INFO "DMA: preallocated %u KiB pool for atomic coherent allocations\n", - (unsigned)size / 1024); + spin_lock_init(&pool->lock); + pool->vaddr = ptr; + pool->page = page; + pool->bitmap = bitmap; + pool->nr_pages = nr_pages; + pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", + (unsigned)pool->size / 1024); return 0; } - printk(KERN_ERR "DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", - (unsigned)size / 1024); + kfree(bitmap); +no_bitmap: + pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", + (unsigned)pool->size / 1024); return -ENOMEM; } /* * CMA is activated by core_initcall, so we must be called after it. */ -postcore_initcall(coherent_init); +postcore_initcall(atomic_pool_init); struct dma_contig_early_reserve { phys_addr_t base; @@ -406,112 +376,6 @@ void __init dma_contiguous_remap(void) } } -static void * -__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, - const void *caller) -{ - struct arm_vmregion *c; - size_t align; - int bit; - - if (!consistent_pte) { - pr_err("%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } - - /* - * Align the virtual region allocation - maximum alignment is - * a section size, minimum is a page size. This helps reduce - * fragmentation of the DMA space, and also prevents allocations - * smaller than a section from crossing a section boundary. - */ - bit = fls(size - 1); - if (bit > SECTION_SHIFT) - bit = SECTION_SHIFT; - align = 1 << bit; - - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller); - if (c) { - pte_t *pte; - int idx = CONSISTENT_PTE_INDEX(c->vm_start); - u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - - pte = consistent_pte[idx] + off; - c->priv = page; - - do { - BUG_ON(!pte_none(*pte)); - - set_pte_ext(pte, mk_pte(page, prot), 0); - page++; - pte++; - off++; - if (off >= PTRS_PER_PTE) { - off = 0; - pte = consistent_pte[++idx]; - } - } while (size -= PAGE_SIZE); - - dsb(); - - return (void *)c->vm_start; - } - return NULL; -} - -static void __dma_free_remap(void *cpu_addr, size_t size) -{ - struct arm_vmregion *c; - unsigned long addr; - pte_t *ptep; - int idx; - u32 off; - - c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr); - if (!c) { - pr_err("%s: trying to free invalid coherent area: %p\n", - __func__, cpu_addr); - dump_stack(); - return; - } - - if ((c->vm_end - c->vm_start) != size) { - pr_err("%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - idx = CONSISTENT_PTE_INDEX(c->vm_start); - off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - ptep = consistent_pte[idx] + off; - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - - ptep++; - addr += PAGE_SIZE; - off++; - if (off >= PTRS_PER_PTE) { - off = 0; - ptep = consistent_pte[++idx]; - } - - if (pte_none(pte) || !pte_present(pte)) - pr_crit("%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - arm_vmregion_free(&consistent_head, c); -} - static int __dma_update_pte(pte_t *pte, pgtable_t token, unsigned long addr, void *data) { @@ -552,16 +416,17 @@ static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, return ptr; } -static void *__alloc_from_pool(struct device *dev, size_t size, - struct page **ret_page, const void *caller) +static void *__alloc_from_pool(size_t size, struct page **ret_page) { - struct arm_vmregion *c; + struct dma_pool *pool = &atomic_pool; + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned int pageno; + unsigned long flags; + void *ptr = NULL; size_t align; - if (!coherent_head.vm_start) { - printk(KERN_ERR "%s: coherent pool not initialised!\n", - __func__); - dump_stack(); + if (!pool->vaddr) { + WARN(1, "coherent pool not initialised!\n"); return NULL; } @@ -571,35 +436,41 @@ static void *__alloc_from_pool(struct device *dev, size_t size, * size. This helps reduce fragmentation of the DMA space. */ align = PAGE_SIZE << get_order(size); - c = arm_vmregion_alloc(&coherent_head, align, size, 0, caller); - if (c) { - void *ptr = (void *)c->vm_start; - struct page *page = virt_to_page(ptr); - *ret_page = page; - return ptr; + + spin_lock_irqsave(&pool->lock, flags); + pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, + 0, count, (1 << align) - 1); + if (pageno < pool->nr_pages) { + bitmap_set(pool->bitmap, pageno, count); + ptr = pool->vaddr + PAGE_SIZE * pageno; + *ret_page = pool->page + pageno; } - return NULL; + spin_unlock_irqrestore(&pool->lock, flags); + + return ptr; } -static int __free_from_pool(void *cpu_addr, size_t size) +static int __free_from_pool(void *start, size_t size) { - unsigned long start = (unsigned long)cpu_addr; - unsigned long end = start + size; - struct arm_vmregion *c; + struct dma_pool *pool = &atomic_pool; + unsigned long pageno, count; + unsigned long flags; - if (start < coherent_head.vm_start || end > coherent_head.vm_end) + if (start < pool->vaddr || start > pool->vaddr + pool->size) return 0; - c = arm_vmregion_find_remove(&coherent_head, (unsigned long)start); - - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; + if (start + size > pool->vaddr + pool->size) { + WARN(1, "freeing wrong coherent size from pool\n"); + return 0; } - arm_vmregion_free(&coherent_head, c); + pageno = (start - pool->vaddr) >> PAGE_SHIFT; + count = size >> PAGE_SHIFT; + + spin_lock_irqsave(&pool->lock, flags); + bitmap_clear(pool->bitmap, pageno, count); + spin_unlock_irqrestore(&pool->lock, flags); + return 1; } @@ -644,7 +515,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __get_dma_pgprot(attrs, prot) __pgprot(0) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL -#define __alloc_from_pool(dev, size, ret_page, c) NULL +#define __alloc_from_pool(size, ret_page) NULL #define __alloc_from_contiguous(dev, size, prot, ret) NULL #define __free_from_pool(cpu_addr, size) 0 #define __free_from_contiguous(dev, page, size) do { } while (0) @@ -702,10 +573,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (arch_is_coherent() || nommu()) addr = __alloc_simple_buffer(dev, size, gfp, &page); + else if (gfp & GFP_ATOMIC) + addr = __alloc_from_pool(size, &page); else if (!IS_ENABLED(CONFIG_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); - else if (gfp & GFP_ATOMIC) - addr = __alloc_from_pool(dev, size, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page); @@ -741,16 +612,22 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, { int ret = -ENXIO; #ifdef CONFIG_MMU + unsigned long nr_vma_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long pfn = dma_to_pfn(dev, dma_addr); + unsigned long off = vma->vm_pgoff; + vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) return ret; - ret = remap_pfn_range(vma, vma->vm_start, - pfn + vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); + if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) { + ret = remap_pfn_range(vma, vma->vm_start, + pfn + off, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); + } #endif /* CONFIG_MMU */ return ret; @@ -785,6 +662,21 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, } } +int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t handle, size_t size, + struct dma_attrs *attrs) +{ + struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); + int ret; + + ret = sg_alloc_table(sgt, 1, GFP_KERNEL); + if (unlikely(ret)) + return ret; + + sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0); + return 0; +} + static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) @@ -998,9 +890,6 @@ static int arm_dma_set_mask(struct device *dev, u64 dma_mask) static int __init dma_debug_do_init(void) { -#ifdef CONFIG_MMU - arm_vmregion_create_proc("dma-mappings", &consistent_head); -#endif dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } @@ -1088,10 +977,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return pages; error: - while (--i) + while (i--) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); @@ -1106,7 +995,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s for (i = 0; i < count; i++) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); @@ -1117,61 +1006,32 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s * Create a CPU mapping for a specified pages */ static void * -__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot) +__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { - struct arm_vmregion *c; - size_t align; - size_t count = size >> PAGE_SHIFT; - int bit; + unsigned int i, nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; + struct vm_struct *area; + unsigned long p; - if (!consistent_pte[0]) { - pr_err("%s: not initialised\n", __func__); - dump_stack(); + area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, + caller); + if (!area) return NULL; - } - /* - * Align the virtual region allocation - maximum alignment is - * a section size, minimum is a page size. This helps reduce - * fragmentation of the DMA space, and also prevents allocations - * smaller than a section from crossing a section boundary. - */ - bit = fls(size - 1); - if (bit > SECTION_SHIFT) - bit = SECTION_SHIFT; - align = 1 << bit; + area->pages = pages; + area->nr_pages = nr_pages; + p = (unsigned long)area->addr; - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM), NULL); - if (c) { - pte_t *pte; - int idx = CONSISTENT_PTE_INDEX(c->vm_start); - int i = 0; - u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - - pte = consistent_pte[idx] + off; - c->priv = pages; - - do { - BUG_ON(!pte_none(*pte)); - - set_pte_ext(pte, mk_pte(pages[i], prot), 0); - pte++; - off++; - i++; - if (off >= PTRS_PER_PTE) { - off = 0; - pte = consistent_pte[++idx]; - } - } while (i < count); - - dsb(); - - return (void *)c->vm_start; + for (i = 0; i < nr_pages; i++) { + phys_addr_t phys = __pfn_to_phys(page_to_pfn(pages[i])); + if (ioremap_page_range(p, p + PAGE_SIZE, phys, prot)) + goto err; + p += PAGE_SIZE; } + return area->addr; +err: + unmap_kernel_range((unsigned long)area->addr, size); + vunmap(area->addr); return NULL; } @@ -1230,6 +1090,19 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) +{ + struct vm_struct *area; + + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + return cpu_addr; + + area = find_vm_area(cpu_addr); + if (area && (area->flags & VM_ARM_DMA_CONSISTENT)) + return area->pages; + return NULL; +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1248,7 +1121,11 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, if (*handle == DMA_ERROR_CODE) goto err_buffer; - addr = __iommu_alloc_remap(pages, size, gfp, prot); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + return pages; + + addr = __iommu_alloc_remap(pages, size, gfp, prot, + __builtin_return_address(0)); if (!addr) goto err_mapping; @@ -1265,31 +1142,25 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs) { - struct arm_vmregion *c; + unsigned long uaddr = vma->vm_start; + unsigned long usize = vma->vm_end - vma->vm_start; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); - c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr); - - if (c) { - struct page **pages = c->priv; - - unsigned long uaddr = vma->vm_start; - unsigned long usize = vma->vm_end - vma->vm_start; - int i = 0; - do { - int ret; + if (!pages) + return -ENXIO; - ret = vm_insert_page(vma, uaddr, pages[i++]); - if (ret) { - pr_err("Remapping memory, error: %d\n", ret); - return ret; - } + do { + int ret = vm_insert_page(vma, uaddr, *pages++); + if (ret) { + pr_err("Remapping memory failed: %d\n", ret); + return ret; + } + uaddr += PAGE_SIZE; + usize -= PAGE_SIZE; + } while (usize > 0); - uaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } while (usize > 0); - } return 0; } @@ -1300,16 +1171,35 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, struct dma_attrs *attrs) { - struct arm_vmregion *c; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); size = PAGE_ALIGN(size); - c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr); - if (c) { - struct page **pages = c->priv; - __dma_free_remap(cpu_addr, size); - __iommu_remove_mapping(dev, handle, size); - __iommu_free_buffer(dev, pages, size); + if (!pages) { + WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr); + return; } + + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { + unmap_kernel_range((unsigned long)cpu_addr, size); + vunmap(cpu_addr); + } + + __iommu_remove_mapping(dev, handle, size); + __iommu_free_buffer(dev, pages, size); +} + +static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size, struct dma_attrs *attrs) +{ + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); + + if (!pages) + return -ENXIO; + + return sg_alloc_table_from_pages(sgt, pages, count, 0, size, + GFP_KERNEL); } /* @@ -1317,7 +1207,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, */ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, size_t size, dma_addr_t *handle, - enum dma_data_direction dir) + enum dma_data_direction dir, struct dma_attrs *attrs) { struct dma_iommu_mapping *mapping = dev->archdata.mapping; dma_addr_t iova, iova_base; @@ -1336,7 +1226,8 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, phys_addr_t phys = page_to_phys(sg_page(s)); unsigned int len = PAGE_ALIGN(s->offset + s->length); - if (!arch_is_coherent()) + if (!arch_is_coherent() && + !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); ret = iommu_map(mapping->domain, iova, phys, len, 0); @@ -1383,7 +1274,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) { if (__map_sg_chunk(dev, start, size, &dma->dma_address, - dir) < 0) + dir, attrs) < 0) goto bad_mapping; dma->dma_address += offset; @@ -1396,7 +1287,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, } size += s->length; } - if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir) < 0) + if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs) < 0) goto bad_mapping; dma->dma_address += offset; @@ -1430,7 +1321,8 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, if (sg_dma_len(s)) __iommu_remove_mapping(dev, sg_dma_address(s), sg_dma_len(s)); - if (!arch_is_coherent()) + if (!arch_is_coherent() && + !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir); } @@ -1492,7 +1384,7 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, dma_addr_t dma_addr; int ret, len = PAGE_ALIGN(size + offset); - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(page, offset, size, dir); dma_addr = __alloc_iova(mapping, len); @@ -1531,7 +1423,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, if (!iova) return; - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(page, offset, size, dir); iommu_unmap(mapping->domain, iova, len); @@ -1571,6 +1463,7 @@ struct dma_map_ops iommu_ops = { .alloc = arm_iommu_alloc_attrs, .free = arm_iommu_free_attrs, .mmap = arm_iommu_mmap_attrs, + .get_sgtable = arm_iommu_get_sgtable, .map_page = arm_iommu_map_page, .unmap_page = arm_iommu_unmap_page, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f54d5921976..9aec41fa80a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -21,13 +21,13 @@ #include <linux/gfp.h> #include <linux/memblock.h> #include <linux/dma-contiguous.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/memblock.h> #include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> -#include <asm/sizes.h> #include <asm/tlb.h> #include <asm/fixmap.h> diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 4f55f5062ab..566750fa57d 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -25,6 +25,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/io.h> +#include <linux/sizes.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -32,7 +33,6 @@ #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> -#include <asm/sizes.h> #include <asm/system_info.h> #include <asm/mach/map.h> diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 2e8a1efdf7b..6776160618e 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -59,6 +59,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) +/* consistent regions used by dma_alloc_attrs() */ +#define VM_ARM_DMA_CONSISTENT 0x20000000 + #endif #ifdef CONFIG_ZONE_DMA diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index cf4528d5177..4c2d0451e84 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -16,13 +16,13 @@ #include <linux/memblock.h> #include <linux/fs.h> #include <linux/vmalloc.h> +#include <linux/sizes.h> #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/sections.h> #include <asm/cachetype.h> #include <asm/setup.h> -#include <asm/sizes.h> #include <asm/smp_plat.h> #include <asm/tlb.h> #include <asm/highmem.h> @@ -422,12 +422,6 @@ static void __init build_mem_type_table(void) vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; /* - * Only use write-through for non-SMP systems - */ - if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) - vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte; - - /* * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 5900cd520e8..86b8b480634 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -107,6 +107,12 @@ ENTRY(cpu_v6_switch_mm) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 +#ifdef CONFIG_PID_IN_CONTEXTIDR + mrc p15, 0, r2, c13, c0, 1 @ read current context ID + bic r2, r2, #0xff @ extract the PID + and r1, r1, #0xff + orr r1, r1, r2 @ insert into new context ID +#endif mcr p15, 0, r1, c13, c0, 1 @ set context ID #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 42ac069c801..fd045e70639 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -46,6 +46,11 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif +#ifdef CONFIG_PID_IN_CONTEXTIDR + mrc p15, 0, r2, c13, c0, 1 @ read current context ID + lsr r2, r2, #8 @ extract the PID + bfi r1, r2, #8, #24 @ insert into new context ID +#endif #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 4e0a371630b..99c63d4b6af 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -23,26 +23,37 @@ #include <asm/ptrace.h> #ifdef CONFIG_HW_PERF_EVENTS + +/* + * OProfile has a curious naming scheme for the ARM PMUs, but they are + * part of the user ABI so we need to map from the perf PMU name for + * supported PMUs. + */ +static struct op_perf_name { + char *perf_name; + char *op_name; +} op_perf_name_map[] = { + { "xscale1", "arm/xscale1" }, + { "xscale1", "arm/xscale2" }, + { "v6", "arm/armv6" }, + { "v6mpcore", "arm/mpcore" }, + { "ARMv7 Cortex-A8", "arm/armv7" }, + { "ARMv7 Cortex-A9", "arm/armv7-ca9" }, +}; + char *op_name_from_perf_id(void) { - enum arm_perf_pmu_ids id = armpmu_get_pmu_id(); - - switch (id) { - case ARM_PERF_PMU_ID_XSCALE1: - return "arm/xscale1"; - case ARM_PERF_PMU_ID_XSCALE2: - return "arm/xscale2"; - case ARM_PERF_PMU_ID_V6: - return "arm/armv6"; - case ARM_PERF_PMU_ID_V6MP: - return "arm/mpcore"; - case ARM_PERF_PMU_ID_CA8: - return "arm/armv7"; - case ARM_PERF_PMU_ID_CA9: - return "arm/armv7-ca9"; - default: - return NULL; + int i; + struct op_perf_name names; + const char *perf_name = perf_pmu_name(); + + for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) { + names = op_perf_name_map[i]; + if (!strcmp(names.perf_name, perf_name)) + return names.op_name; } + + return NULL; } #endif diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index 5cac2c540f4..5c10ad05df7 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -12,9 +12,11 @@ #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/module.h> #include <linux/smsc911x.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -48,27 +50,22 @@ /* CPU ID and Personality ID */ #define MCU_BOARD_ID_REG 0x68 -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) #define MXC_MAX_EXP_IO_LINES 16 /* interrupts like external uart , external ethernet etc*/ -#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0) -#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1) -#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2) -#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3) -#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4) +#define EXPIO_INT_ENET 0 +#define EXPIO_INT_XUART_A 1 +#define EXPIO_INT_XUART_B 2 +#define EXPIO_INT_BUTTON_A 3 +#define EXPIO_INT_BUTTON_B 4 static void __iomem *brd_io; +static struct irq_domain *domain; static struct resource smsc911x_resources[] = { { .flags = IORESOURCE_MEM, } , { - .start = EXPIO_INT_ENET, - .end = EXPIO_INT_ENET, .flags = IORESOURCE_IRQ, }, }; @@ -100,11 +97,11 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) imr_val = __raw_readw(brd_io + INTR_MASK_REG); int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; - expio_irq = MXC_BOARD_IRQ_START; + expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { if ((int_valid & 1) == 0) continue; - generic_handle_irq(expio_irq); + generic_handle_irq(irq_find_mapping(domain, expio_irq)); } desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -118,7 +115,7 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) static void expio_mask_irq(struct irq_data *d) { u16 reg; - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; reg = __raw_readw(brd_io + INTR_MASK_REG); reg |= (1 << expio); @@ -127,7 +124,7 @@ static void expio_mask_irq(struct irq_data *d) static void expio_ack_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; __raw_writew(1 << expio, brd_io + INTR_RESET_REG); __raw_writew(0, brd_io + INTR_RESET_REG); @@ -137,7 +134,7 @@ static void expio_ack_irq(struct irq_data *d) static void expio_unmask_irq(struct irq_data *d) { u16 reg; - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; reg = __raw_readw(brd_io + INTR_MASK_REG); reg &= ~(1 << expio); @@ -155,8 +152,10 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), }; -int __init mxc_expio_init(u32 base, u32 p_irq) +int __init mxc_expio_init(u32 base, u32 intr_gpio) { + u32 p_irq = gpio_to_irq(intr_gpio); + int irq_base; int i; brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); @@ -178,16 +177,23 @@ int __init mxc_expio_init(u32 base, u32 p_irq) /* * Configure INT line as GPIO input */ - gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq"); - gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq)); + gpio_request(intr_gpio, "expio_pirq"); + gpio_direction_input(intr_gpio); /* disable the interrupt and clear the status */ __raw_writew(0, brd_io + INTR_MASK_REG); __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); __raw_writew(0, brd_io + INTR_RESET_REG); __raw_writew(0x1F, brd_io + INTR_MASK_REG); - for (i = MXC_EXP_IO_BASE; - i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } @@ -199,6 +205,8 @@ int __init mxc_expio_init(u32 base, u32 p_irq) smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); + smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); platform_device_register(&smsc_lan9217_device); return 0; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index c722f9ce691..baf9064c084 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -47,12 +47,6 @@ config MXC_TZIC config MXC_AVIC bool -config MXC_PWM - tristate "Enable PWM driver" - select HAVE_PWM - help - Enable support for the i.MX PWM controller(s). - config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" help diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index e81290c27c6..6ac72003115 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -11,11 +11,11 @@ obj-$(CONFIG_MXC_AVIC) += avic.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o -obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 689f81f9593..cbd55c36def 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -19,11 +19,14 @@ #include <linux/module.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/common.h> #include <asm/mach/irq.h> #include <asm/exception.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include "irq-common.h" @@ -50,15 +53,19 @@ #define AVIC_NUM_IRQS 64 void __iomem *avic_base; +static struct irq_domain *domain; static u32 avic_saved_mask_reg[2]; #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { + struct irq_data *d = irq_get_irq_data(irq); unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; + irq = d->hwirq; + if (irq >= AVIC_NUM_IRQS) return -EINVAL; @@ -75,8 +82,11 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) #ifdef CONFIG_FIQ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) { + struct irq_data *d = irq_get_irq_data(irq); unsigned int irqt; + irq = d->hwirq; + if (irq >= AVIC_NUM_IRQS) return -EINVAL; @@ -108,7 +118,7 @@ static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct irq_chip_type *ct = gc->chip_types; - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); __raw_writel(gc->wake_active, avic_base + ct->regs.mask); @@ -118,7 +128,7 @@ static void avic_irq_resume(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct irq_chip_type *ct = gc->chip_types; - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); } @@ -128,11 +138,10 @@ static void avic_irq_resume(struct irq_data *d) #define avic_irq_resume NULL #endif -static __init void avic_init_gc(unsigned int irq_start) +static __init void avic_init_gc(int idx, unsigned int irq_start) { struct irq_chip_generic *gc; struct irq_chip_type *ct; - int idx = irq_start >> 5; gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base, handle_level_irq); @@ -161,7 +170,7 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) if (nivector == 0xffff) break; - handle_IRQ(nivector, regs); + handle_IRQ(irq_find_mapping(domain, nivector), regs); } while (1); } @@ -172,6 +181,8 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) */ void __init mxc_init_irq(void __iomem *irqbase) { + struct device_node *np; + int irq_base; int i; avic_base = irqbase; @@ -190,8 +201,16 @@ void __init mxc_init_irq(void __iomem *irqbase) __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); - for (i = 0; i < AVIC_NUM_IRQS; i += 32) - avic_init_gc(i); + irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32) + avic_init_gc(i, irq_base); /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) @@ -199,7 +218,7 @@ void __init mxc_init_irq(void __iomem *irqbase) #ifdef CONFIG_FIQ /* Initialize FIQ */ - init_FIQ(); + init_FIQ(FIQ_START); #endif printk(KERN_INFO "MXC IRQ initialized\n"); diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/plat-mxc/cpuidle.c new file mode 100644 index 00000000000..d4cb511a44a --- /dev/null +++ b/arch/arm/plat-mxc/cpuidle.c @@ -0,0 +1,80 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/cpuidle.h> +#include <linux/err.h> +#include <linux/hrtimer.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +static struct cpuidle_device __percpu * imx_cpuidle_devices; + +static void __init imx_cpuidle_devices_uninit(void) +{ + int cpu_id; + struct cpuidle_device *dev; + + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); + cpuidle_unregister_device(dev); + } + + free_percpu(imx_cpuidle_devices); +} + +int __init imx_cpuidle_init(struct cpuidle_driver *drv) +{ + struct cpuidle_device *dev; + int cpu_id, ret; + + if (drv->state_count > CPUIDLE_STATE_MAX) { + pr_err("%s: state_count exceeds maximum\n", __func__); + return -EINVAL; + } + + ret = cpuidle_register_driver(drv); + if (ret) { + pr_err("%s: Failed to register cpuidle driver with error: %d\n", + __func__, ret); + return ret; + } + + imx_cpuidle_devices = alloc_percpu(struct cpuidle_device); + if (imx_cpuidle_devices == NULL) { + ret = -ENOMEM; + goto unregister_drv; + } + + /* initialize state data for each cpuidle_device */ + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); + dev->cpu = cpu_id; + dev->state_count = drv->state_count; + + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("%s: Failed to register cpu %u, error: %d\n", + __func__, cpu_id, ret); + goto uninit; + } + } + + return 0; + +uninit: + imx_cpuidle_devices_uninit(); + +unregister_drv: + cpuidle_unregister_driver(drv); + return ret; +} diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index 79d340ae0af..d1e33cc6f12 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -30,8 +30,7 @@ const struct imx_ipu_core_data imx35_ipu_core_data __initconst = static struct platform_device *imx_ipu_coredev __initdata; struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data, - const struct ipu_platform_data *pdata) + const struct imx_ipu_core_data *data) { /* The resource order is important! */ struct resource res[] = { @@ -55,7 +54,7 @@ struct platform_device *__init imx_add_ipu_core( }; return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + res, ARRAY_SIZE(res), NULL, 0); } struct platform_device *__init imx_alloc_mx3_camera( diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c index 16d0ec4df5f..a5c9ad5721c 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c @@ -20,6 +20,11 @@ const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = imx_mxc_rtc_data_entry_single(MX31); #endif /* ifdef CONFIG_SOC_IMX31 */ +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = + imx_mxc_rtc_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + struct platform_device *__init imx_add_mxc_rtc( const struct imx_mxc_rtc_data *data) { diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 9bfae8bd5b8..9c50c14c8f9 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -95,7 +95,7 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #ifdef CONFIG_SOC_IMX53 /* i.mx53 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx53_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K); /* i.mx53 has the i.mx51 type ecspi */ const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = { diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h index a384fdd49c6..9fd6cb3f8fa 100644 --- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h +++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MXC_3DS_DB_H__ #define __ASM_ARCH_MXC_3DS_DB_H__ -extern int __init mxc_expio_init(u32 base, u32 p_irq); +extern int __init mxc_expio_init(u32 base, u32 intr_gpio); #endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index e429ca1b814..7128e971041 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,6 +54,7 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); +extern void imx53_init_late(void); extern void epit_timer_init(void __iomem *base, int irq); extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -67,6 +68,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx27_clocks_init_dt(void); +extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); extern int mx6q_clocks_init(void); @@ -95,7 +97,6 @@ enum mx3_cpu_pwr_mode { }; extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); -extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); @@ -146,8 +147,12 @@ extern void imx6q_clock_map_io(void); #ifdef CONFIG_PM extern void imx6q_pm_init(void); +extern void imx51_pm_init(void); +extern void imx53_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx51_pm_init(void) {} +static inline void imx53_pm_init(void) {} #endif #ifdef CONFIG_NEON diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/plat-mxc/include/mach/cpuidle.h new file mode 100644 index 00000000000..bc932d1af37 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/cpuidle.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/cpuidle.h> + +#ifdef CONFIG_CPU_IDLE +extern int imx_cpuidle_init(struct cpuidle_driver *drv); +#else +static inline int imx_cpuidle_init(struct cpuidle_driver *drv) +{ + return -ENODEV; +} +#endif diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 1b2258daa05..a7f5bb1084d 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -183,7 +183,6 @@ struct platform_device *__init imx_add_imx_udc( const struct imx_imx_udc_data *data, const struct imxusb_platform_data *pdata); -#include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mx3_camera.h> struct imx_ipu_core_data { @@ -192,8 +191,7 @@ struct imx_ipu_core_data { resource_size_t errirq; }; struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data, - const struct ipu_platform_data *pdata); + const struct imx_ipu_core_data *data); struct platform_device *__init imx_alloc_mx3_camera( const struct imx_ipu_core_data *data, const struct mx3_camera_pdata *pdata); diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 0630513554d..ebf10654bb4 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -50,7 +50,7 @@ * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 * mx21: * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 - * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 * mx25: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 @@ -58,47 +58,50 @@ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 * mx27: * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 - * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000 * mx31: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 - * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * mx35: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 - * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * mx50: * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 - * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 * mx51: - * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000 + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 + * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000 * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 - * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000 + * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000 * mx53: * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 * mx6q: - * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000 + * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000 * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000 - * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000 + * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000 * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000 */ #define IMX_IO_P2V(x) ( \ - 0xf4000000 + \ + (((x) & 0x80000000) >> 7) | \ + (0xf4000000 + \ (((x) & 0x50000000) >> 6) + \ (((x) & 0x0b000000) >> 4) + \ - (((x) & 0x000fffff))) + (((x) & 0x000fffff)))) #define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) @@ -128,6 +131,4 @@ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) -#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio)) - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h index 375cdd0cf87..8289d915e61 100644 --- a/arch/arm/plat-mxc/include/mach/i2c.h +++ b/arch/arm/plat-mxc/include/mach/i2c.h @@ -15,7 +15,7 @@ * **/ struct imxi2c_platform_data { - int bitrate; + u32 bitrate; }; #endif /* __ASM_ARCH_I2C_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 63f22a009a6..d8b65b51f2a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -160,9 +160,6 @@ int mxc_iomux_mode(unsigned int pin_mode); #define IOMUX_TO_GPIO(iomux_pin) \ ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) -#define IOMUX_TO_IRQ(iomux_pin) \ - (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ - MXC_GPIO_IRQ_START) /* * This enumeration is constructed based on the Section diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 36c8989d9de..2623e7a2e19 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -107,11 +107,13 @@ #define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL) #define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) @@ -228,6 +230,7 @@ #define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL) @@ -256,12 +259,14 @@ #define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL) @@ -637,7 +642,9 @@ #define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL) #define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL) @@ -780,6 +787,8 @@ #define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL) @@ -788,13 +797,16 @@ #define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) @@ -803,11 +815,13 @@ #define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index f7d18046c04..02651a40fe2 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -85,13 +85,6 @@ #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) -#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) - extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h index a9221f1cc1a..539e559d18b 100644 --- a/arch/arm/plat-mxc/include/mach/ipu.h +++ b/arch/arm/plat-mxc/include/mach/ipu.h @@ -110,10 +110,6 @@ enum ipu_rotate_mode { IPU_ROTATE_90_LEFT = 7, }; -struct ipu_platform_data { - unsigned int irq_base; -}; - /* * Enumeration of DI ports for ADC. */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index fd9efb04465..d73f5e8ea9c 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,50 +11,6 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ -#include <asm-generic/gpio.h> - -/* - * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC - * have 128 IRQs, and those with AVIC have 64. - * - * To support single image, the biggest number should be defined on - * top of the list. - */ -#if defined CONFIG_ARM_GIC -#define MXC_INTERNAL_IRQS 160 -#elif defined CONFIG_MXC_TZIC -#define MXC_INTERNAL_IRQS 128 -#else -#define MXC_INTERNAL_IRQS 64 -#endif - -#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase MXC_BOARD_IRQS, but keep it - * within sensible limits. - */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -#define MXC_BOARD_IRQS 80 -#else -#define MXC_BOARD_IRQS 16 -#endif - -#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) - -#ifdef CONFIG_MX3_IPU_IRQS -#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS -#else -#define MX3_IPU_IRQS 0 -#endif -/* REVISIT: Add IPU irqs on IMX51 */ - -#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) - extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 2b7c08d13e8..45bd31cc34d 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -78,61 +78,62 @@ #define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) /* fixed interrput numbers */ -#define MX1_INT_SOFTINT 0 -#define MX1_INT_CSI 6 -#define MX1_DSPA_MAC_INT 7 -#define MX1_DSPA_INT 8 -#define MX1_COMP_INT 9 -#define MX1_MSHC_XINT 10 -#define MX1_GPIO_INT_PORTA 11 -#define MX1_GPIO_INT_PORTB 12 -#define MX1_GPIO_INT_PORTC 13 -#define MX1_INT_LCDC 14 -#define MX1_SIM_INT 15 -#define MX1_SIM_DATA_INT 16 -#define MX1_RTC_INT 17 -#define MX1_RTC_SAMINT 18 -#define MX1_INT_UART2PFERR 19 -#define MX1_INT_UART2RTS 20 -#define MX1_INT_UART2DTR 21 -#define MX1_INT_UART2UARTC 22 -#define MX1_INT_UART2TX 23 -#define MX1_INT_UART2RX 24 -#define MX1_INT_UART1PFERR 25 -#define MX1_INT_UART1RTS 26 -#define MX1_INT_UART1DTR 27 -#define MX1_INT_UART1UARTC 28 -#define MX1_INT_UART1TX 29 -#define MX1_INT_UART1RX 30 -#define MX1_VOICE_DAC_INT 31 -#define MX1_VOICE_ADC_INT 32 -#define MX1_PEN_DATA_INT 33 -#define MX1_PWM_INT 34 -#define MX1_SDHC_INT 35 -#define MX1_INT_I2C 39 -#define MX1_INT_CSPI2 40 -#define MX1_INT_CSPI1 41 -#define MX1_SSI_TX_INT 42 -#define MX1_SSI_TX_ERR_INT 43 -#define MX1_SSI_RX_INT 44 -#define MX1_SSI_RX_ERR_INT 45 -#define MX1_TOUCH_INT 46 -#define MX1_INT_USBD0 47 -#define MX1_INT_USBD1 48 -#define MX1_INT_USBD2 49 -#define MX1_INT_USBD3 50 -#define MX1_INT_USBD4 51 -#define MX1_INT_USBD5 52 -#define MX1_INT_USBD6 53 -#define MX1_BTSYS_INT 55 -#define MX1_BTTIM_INT 56 -#define MX1_BTWUI_INT 57 -#define MX1_TIM2_INT 58 -#define MX1_TIM1_INT 59 -#define MX1_DMA_ERR 60 -#define MX1_DMA_INT 61 -#define MX1_GPIO_INT_PORTD 62 -#define MX1_WDT_INT 63 +#include <asm/irq.h> +#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) +#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) +#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) +#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) +#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) +#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) +#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) +#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) +#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) +#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) +#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) +#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) +#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) +#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) +#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) +#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) +#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) +#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) +#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) +#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) +#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) +#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) +#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) +#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) +#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) +#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) +#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) +#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) +#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) +#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) +#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) +#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) +#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) +#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) +#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) +#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) +#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) +#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) +#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) +#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) +#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) +#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) +#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) +#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) +#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) +#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) +#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) +#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) +#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) +#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) +#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) +#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) +#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) +#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) +#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) /* DMA */ #define MX1_DMA_REQ_UART3_T 2 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index 6cd049ebbd8..468738aa997 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -99,59 +99,60 @@ #define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) /* fixed interrupt numbers */ -#define MX21_INT_CSPI3 6 -#define MX21_INT_GPIO 8 -#define MX21_INT_FIRI 9 -#define MX21_INT_SDHC2 10 -#define MX21_INT_SDHC1 11 -#define MX21_INT_I2C 12 -#define MX21_INT_SSI2 13 -#define MX21_INT_SSI1 14 -#define MX21_INT_CSPI2 15 -#define MX21_INT_CSPI1 16 -#define MX21_INT_UART4 17 -#define MX21_INT_UART3 18 -#define MX21_INT_UART2 19 -#define MX21_INT_UART1 20 -#define MX21_INT_KPP 21 -#define MX21_INT_RTC 22 -#define MX21_INT_PWM 23 -#define MX21_INT_GPT3 24 -#define MX21_INT_GPT2 25 -#define MX21_INT_GPT1 26 -#define MX21_INT_WDOG 27 -#define MX21_INT_PCMCIA 28 -#define MX21_INT_NFC 29 -#define MX21_INT_BMI 30 -#define MX21_INT_CSI 31 -#define MX21_INT_DMACH0 32 -#define MX21_INT_DMACH1 33 -#define MX21_INT_DMACH2 34 -#define MX21_INT_DMACH3 35 -#define MX21_INT_DMACH4 36 -#define MX21_INT_DMACH5 37 -#define MX21_INT_DMACH6 38 -#define MX21_INT_DMACH7 39 -#define MX21_INT_DMACH8 40 -#define MX21_INT_DMACH9 41 -#define MX21_INT_DMACH10 42 -#define MX21_INT_DMACH11 43 -#define MX21_INT_DMACH12 44 -#define MX21_INT_DMACH13 45 -#define MX21_INT_DMACH14 46 -#define MX21_INT_DMACH15 47 -#define MX21_INT_EMMAENC 49 -#define MX21_INT_EMMADEC 50 -#define MX21_INT_EMMAPRP 51 -#define MX21_INT_EMMAPP 52 -#define MX21_INT_USBWKUP 53 -#define MX21_INT_USBDMA 54 -#define MX21_INT_USBHOST 55 -#define MX21_INT_USBFUNC 56 -#define MX21_INT_USBMNP 57 -#define MX21_INT_USBCTRL 58 -#define MX21_INT_SLCDC 60 -#define MX21_INT_LCDC 61 +#include <asm/irq.h> +#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9) +#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX21_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX21_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX21_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX21_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX21_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX21_INT_BMI (NR_IRQS_LEGACY + 30) +#define MX21_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49) +#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50) +#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53) +#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54) +#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55) +#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56) +#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57) +#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58) +#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61) /* fixed DMA request numbers */ #define MX21_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index ccebf5ba12f..627d94f1b01 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -61,40 +61,44 @@ #define MX25_IO_P2V(x) IMX_IO_P2V(x) #define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) -#define MX25_INT_CSPI3 0 -#define MX25_INT_I2C1 3 -#define MX25_INT_I2C2 4 -#define MX25_INT_UART4 5 -#define MX25_INT_ESDHC2 8 -#define MX25_INT_ESDHC1 9 -#define MX25_INT_I2C3 10 -#define MX25_INT_SSI2 11 -#define MX25_INT_SSI1 12 -#define MX25_INT_CSPI2 13 -#define MX25_INT_CSPI1 14 -#define MX25_INT_GPIO3 16 -#define MX25_INT_CSI 17 -#define MX25_INT_UART3 18 -#define MX25_INT_GPIO4 23 -#define MX25_INT_KPP 24 -#define MX25_INT_DRYICE 25 -#define MX25_INT_PWM1 26 -#define MX25_INT_UART2 32 -#define MX25_INT_NFC 33 -#define MX25_INT_SDMA 34 -#define MX25_INT_USB_HS 35 -#define MX25_INT_PWM2 36 -#define MX25_INT_USB_OTG 37 -#define MX25_INT_LCDC 39 -#define MX25_INT_UART5 40 -#define MX25_INT_PWM3 41 -#define MX25_INT_PWM4 42 -#define MX25_INT_CAN1 43 -#define MX25_INT_CAN2 44 -#define MX25_INT_UART1 45 -#define MX25_INT_GPIO2 51 -#define MX25_INT_GPIO1 52 -#define MX25_INT_FEC 57 +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0) +#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3) +#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5) +#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9) +#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10) +#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16) +#define MX25_INT_CSI (NR_IRQS_LEGACY + 17) +#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23) +#define MX25_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25) +#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26) +#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX25_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36) +#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39) +#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40) +#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41) +#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42) +#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 #define MX25_DMA_REQ_SSI2_TX1 23 diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 6265357284d..e074616d54c 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -128,69 +128,70 @@ #define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) /* fixed interrupt numbers */ -#define MX27_INT_I2C2 1 -#define MX27_INT_GPT6 2 -#define MX27_INT_GPT5 3 -#define MX27_INT_GPT4 4 -#define MX27_INT_RTIC 5 -#define MX27_INT_CSPI3 6 -#define MX27_INT_SDHC 7 -#define MX27_INT_GPIO 8 -#define MX27_INT_SDHC3 9 -#define MX27_INT_SDHC2 10 -#define MX27_INT_SDHC1 11 -#define MX27_INT_I2C1 12 -#define MX27_INT_SSI2 13 -#define MX27_INT_SSI1 14 -#define MX27_INT_CSPI2 15 -#define MX27_INT_CSPI1 16 -#define MX27_INT_UART4 17 -#define MX27_INT_UART3 18 -#define MX27_INT_UART2 19 -#define MX27_INT_UART1 20 -#define MX27_INT_KPP 21 -#define MX27_INT_RTC 22 -#define MX27_INT_PWM 23 -#define MX27_INT_GPT3 24 -#define MX27_INT_GPT2 25 -#define MX27_INT_GPT1 26 -#define MX27_INT_WDOG 27 -#define MX27_INT_PCMCIA 28 -#define MX27_INT_NFC 29 -#define MX27_INT_ATA 30 -#define MX27_INT_CSI 31 -#define MX27_INT_DMACH0 32 -#define MX27_INT_DMACH1 33 -#define MX27_INT_DMACH2 34 -#define MX27_INT_DMACH3 35 -#define MX27_INT_DMACH4 36 -#define MX27_INT_DMACH5 37 -#define MX27_INT_DMACH6 38 -#define MX27_INT_DMACH7 39 -#define MX27_INT_DMACH8 40 -#define MX27_INT_DMACH9 41 -#define MX27_INT_DMACH10 42 -#define MX27_INT_DMACH11 43 -#define MX27_INT_DMACH12 44 -#define MX27_INT_DMACH13 45 -#define MX27_INT_DMACH14 46 -#define MX27_INT_DMACH15 47 -#define MX27_INT_UART6 48 -#define MX27_INT_UART5 49 -#define MX27_INT_FEC 50 -#define MX27_INT_EMMAPRP 51 -#define MX27_INT_EMMAPP 52 -#define MX27_INT_VPU 53 -#define MX27_INT_USB_HS1 54 -#define MX27_INT_USB_HS2 55 -#define MX27_INT_USB_OTG 56 -#define MX27_INT_SCC_SMN 57 -#define MX27_INT_SCC_SCM 58 -#define MX27_INT_SAHARA 59 -#define MX27_INT_SLCDC 60 -#define MX27_INT_LCDC 61 -#define MX27_INT_IIM 62 -#define MX27_INT_CCM 63 +#include <asm/irq.h> +#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1) +#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2) +#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3) +#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) +#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) +#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) +#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12) +#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX27_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX27_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX27_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX27_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX27_INT_ATA (NR_IRQS_LEGACY + 30) +#define MX27_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48) +#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49) +#define MX27_INT_FEC (NR_IRQS_LEGACY + 50) +#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX27_INT_VPU (NR_IRQS_LEGACY + 53) +#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54) +#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55) +#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56) +#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57) +#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58) +#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59) +#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61) +#define MX27_INT_IIM (NR_IRQS_LEGACY + 62) +#define MX27_INT_CCM (NR_IRQS_LEGACY + 63) /* fixed DMA request numbers */ #define MX27_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index 6d07839fdec..11642f5b224 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -68,49 +68,50 @@ #define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) /* fixed interrupt numbers */ -#define MX2x_INT_CSPI3 6 -#define MX2x_INT_GPIO 8 -#define MX2x_INT_SDHC2 10 -#define MX2x_INT_SDHC1 11 -#define MX2x_INT_I2C 12 -#define MX2x_INT_SSI2 13 -#define MX2x_INT_SSI1 14 -#define MX2x_INT_CSPI2 15 -#define MX2x_INT_CSPI1 16 -#define MX2x_INT_UART4 17 -#define MX2x_INT_UART3 18 -#define MX2x_INT_UART2 19 -#define MX2x_INT_UART1 20 -#define MX2x_INT_KPP 21 -#define MX2x_INT_RTC 22 -#define MX2x_INT_PWM 23 -#define MX2x_INT_GPT3 24 -#define MX2x_INT_GPT2 25 -#define MX2x_INT_GPT1 26 -#define MX2x_INT_WDOG 27 -#define MX2x_INT_PCMCIA 28 -#define MX2x_INT_NANDFC 29 -#define MX2x_INT_CSI 31 -#define MX2x_INT_DMACH0 32 -#define MX2x_INT_DMACH1 33 -#define MX2x_INT_DMACH2 34 -#define MX2x_INT_DMACH3 35 -#define MX2x_INT_DMACH4 36 -#define MX2x_INT_DMACH5 37 -#define MX2x_INT_DMACH6 38 -#define MX2x_INT_DMACH7 39 -#define MX2x_INT_DMACH8 40 -#define MX2x_INT_DMACH9 41 -#define MX2x_INT_DMACH10 42 -#define MX2x_INT_DMACH11 43 -#define MX2x_INT_DMACH12 44 -#define MX2x_INT_DMACH13 45 -#define MX2x_INT_DMACH14 46 -#define MX2x_INT_DMACH15 47 -#define MX2x_INT_EMMAPRP 51 -#define MX2x_INT_EMMAPP 52 -#define MX2x_INT_SLCDC 60 -#define MX2x_INT_LCDC 61 +#include <asm/irq.h> +#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29) +#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61) /* fixed DMA request numbers */ #define MX2x_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index e27619e442c..dbced61d9fd 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -118,63 +118,67 @@ #define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) -#define MX31_INT_I2C3 3 -#define MX31_INT_I2C2 4 -#define MX31_INT_MPEG4_ENCODER 5 -#define MX31_INT_RTIC 6 -#define MX31_INT_FIRI 7 -#define MX31_INT_SDHC2 8 -#define MX31_INT_SDHC1 9 -#define MX31_INT_I2C1 10 -#define MX31_INT_SSI2 11 -#define MX31_INT_SSI1 12 -#define MX31_INT_CSPI2 13 -#define MX31_INT_CSPI1 14 -#define MX31_INT_ATA 15 -#define MX31_INT_MBX 16 -#define MX31_INT_CSPI3 17 -#define MX31_INT_UART3 18 -#define MX31_INT_IIM 19 -#define MX31_INT_SIM2 20 -#define MX31_INT_SIM1 21 -#define MX31_INT_RNGA 22 -#define MX31_INT_EVTMON 23 -#define MX31_INT_KPP 24 -#define MX31_INT_RTC 25 -#define MX31_INT_PWM 26 -#define MX31_INT_EPIT2 27 -#define MX31_INT_EPIT1 28 -#define MX31_INT_GPT 29 -#define MX31_INT_POWER_FAIL 30 -#define MX31_INT_CCM_DVFS 31 -#define MX31_INT_UART2 32 -#define MX31_INT_NFC 33 -#define MX31_INT_SDMA 34 -#define MX31_INT_USB_HS1 35 -#define MX31_INT_USB_HS2 36 -#define MX31_INT_USB_OTG 37 -#define MX31_INT_MSHC1 39 -#define MX31_INT_MSHC2 40 -#define MX31_INT_IPU_ERR 41 -#define MX31_INT_IPU_SYN 42 -#define MX31_INT_UART1 45 -#define MX31_INT_UART4 46 -#define MX31_INT_UART5 47 -#define MX31_INT_ECT 48 -#define MX31_INT_SCC_SCM 49 -#define MX31_INT_SCC_SMN 50 -#define MX31_INT_GPIO2 51 -#define MX31_INT_GPIO1 52 -#define MX31_INT_CCM 53 -#define MX31_INT_PCMCIA 54 -#define MX31_INT_WDOG 55 -#define MX31_INT_GPIO3 56 -#define MX31_INT_EXT_POWER 58 -#define MX31_INT_EXT_TEMPER 59 -#define MX31_INT_EXT_SENSOR60 60 -#define MX31_INT_EXT_SENSOR61 61 -#define MX31_INT_EXT_WDOG 62 -#define MX31_INT_EXT_TV 63 +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5) +#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7) +#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8) +#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9) +#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX31_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX31_INT_MBX (NR_IRQS_LEGACY + 16) +#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17) +#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX31_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20) +#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21) +#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX31_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX31_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX31_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX31_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31) +#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX31_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35) +#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36) +#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40) +#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46) +#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47) +#define MX31_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX31_INT_CCM (NR_IRQS_LEGACY + 53) +#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54) +#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX31_DMA_REQ_SDHC1 20 #define MX31_DMA_REQ_SDHC2 21 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 80965a99aa5..2af5d3a699c 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -120,60 +120,61 @@ /* * Interrupt numbers */ -#define MX35_INT_OWIRE 2 -#define MX35_INT_I2C3 3 -#define MX35_INT_I2C2 4 -#define MX35_INT_RTIC 6 -#define MX35_INT_ESDHC1 7 -#define MX35_INT_ESDHC2 8 -#define MX35_INT_ESDHC3 9 -#define MX35_INT_I2C1 10 -#define MX35_INT_SSI1 11 -#define MX35_INT_SSI2 12 -#define MX35_INT_CSPI2 13 -#define MX35_INT_CSPI1 14 -#define MX35_INT_ATA 15 -#define MX35_INT_GPU2D 16 -#define MX35_INT_ASRC 17 -#define MX35_INT_UART3 18 -#define MX35_INT_IIM 19 -#define MX35_INT_RNGA 22 -#define MX35_INT_EVTMON 23 -#define MX35_INT_KPP 24 -#define MX35_INT_RTC 25 -#define MX35_INT_PWM 26 -#define MX35_INT_EPIT2 27 -#define MX35_INT_EPIT1 28 -#define MX35_INT_GPT 29 -#define MX35_INT_POWER_FAIL 30 -#define MX35_INT_UART2 32 -#define MX35_INT_NFC 33 -#define MX35_INT_SDMA 34 -#define MX35_INT_USB_HS 35 -#define MX35_INT_USB_OTG 37 -#define MX35_INT_MSHC1 39 -#define MX35_INT_ESAI 40 -#define MX35_INT_IPU_ERR 41 -#define MX35_INT_IPU_SYN 42 -#define MX35_INT_CAN1 43 -#define MX35_INT_CAN2 44 -#define MX35_INT_UART1 45 -#define MX35_INT_MLB 46 -#define MX35_INT_SPDIF 47 -#define MX35_INT_ECT 48 -#define MX35_INT_SCC_SCM 49 -#define MX35_INT_SCC_SMN 50 -#define MX35_INT_GPIO2 51 -#define MX35_INT_GPIO1 52 -#define MX35_INT_WDOG 55 -#define MX35_INT_GPIO3 56 -#define MX35_INT_FEC 57 -#define MX35_INT_EXT_POWER 58 -#define MX35_INT_EXT_TEMPER 59 -#define MX35_INT_EXT_SENSOR60 60 -#define MX35_INT_EXT_SENSOR61 61 -#define MX35_INT_EXT_WDOG 62 -#define MX35_INT_EXT_TV 63 +#include <asm/irq.h> +#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2) +#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7) +#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9) +#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11) +#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12) +#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX35_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16) +#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17) +#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX35_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX35_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX35_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX35_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX35_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX35_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40) +#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX35_INT_MLB (NR_IRQS_LEGACY + 46) +#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47) +#define MX35_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX35_INT_FEC (NR_IRQS_LEGACY + 57) +#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX35_DMA_REQ_SSI2_RX1 22 #define MX35_DMA_REQ_SSI2_TX1 23 diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 30dbf424583..96fb4fbc8ad 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -143,44 +143,45 @@ /* * Interrupt numbers */ -#define MX3x_INT_I2C3 3 -#define MX3x_INT_I2C2 4 -#define MX3x_INT_RTIC 6 -#define MX3x_INT_I2C 10 -#define MX3x_INT_CSPI2 13 -#define MX3x_INT_CSPI1 14 -#define MX3x_INT_ATA 15 -#define MX3x_INT_UART3 18 -#define MX3x_INT_IIM 19 -#define MX3x_INT_RNGA 22 -#define MX3x_INT_EVTMON 23 -#define MX3x_INT_KPP 24 -#define MX3x_INT_RTC 25 -#define MX3x_INT_PWM 26 -#define MX3x_INT_EPIT2 27 -#define MX3x_INT_EPIT1 28 -#define MX3x_INT_GPT 29 -#define MX3x_INT_POWER_FAIL 30 -#define MX3x_INT_UART2 32 -#define MX3x_INT_NANDFC 33 -#define MX3x_INT_SDMA 34 -#define MX3x_INT_MSHC1 39 -#define MX3x_INT_IPU_ERR 41 -#define MX3x_INT_IPU_SYN 42 -#define MX3x_INT_UART1 45 -#define MX3x_INT_ECT 48 -#define MX3x_INT_SCC_SCM 49 -#define MX3x_INT_SCC_SMN 50 -#define MX3x_INT_GPIO2 51 -#define MX3x_INT_GPIO1 52 -#define MX3x_INT_WDOG 55 -#define MX3x_INT_GPIO3 56 -#define MX3x_INT_EXT_POWER 58 -#define MX3x_INT_EXT_TEMPER 59 -#define MX3x_INT_EXT_SENSOR60 60 -#define MX3x_INT_EXT_SENSOR61 61 -#define MX3x_INT_EXT_WDOG 62 -#define MX3x_INT_EXT_TV 63 +#include <asm/irq.h> +#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10) +#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33) +#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h index 5f2da75a47f..09ac19c1570 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/plat-mxc/include/mach/mx50.h @@ -188,99 +188,100 @@ /* * Interrupt numbers */ -#define MX50_INT_MMC_SDHC1 1 -#define MX50_INT_MMC_SDHC2 2 -#define MX50_INT_MMC_SDHC3 3 -#define MX50_INT_MMC_SDHC4 4 -#define MX50_INT_DAP 5 -#define MX50_INT_SDMA 6 -#define MX50_INT_IOMUX 7 -#define MX50_INT_UART4 13 -#define MX50_INT_USB_H1 14 -#define MX50_INT_USB_OTG 18 -#define MX50_INT_DATABAHN 19 -#define MX50_INT_ELCDIF 20 -#define MX50_INT_EPXP 21 -#define MX50_INT_SRTC_NTZ 24 -#define MX50_INT_SRTC_TZ 25 -#define MX50_INT_EPDC 27 -#define MX50_INT_NIC 28 -#define MX50_INT_SSI1 29 -#define MX50_INT_SSI2 30 -#define MX50_INT_UART1 31 -#define MX50_INT_UART2 32 -#define MX50_INT_UART3 33 -#define MX50_INT_RESV34 34 -#define MX50_INT_RESV35 35 -#define MX50_INT_CSPI1 36 -#define MX50_INT_CSPI2 37 -#define MX50_INT_CSPI 38 -#define MX50_INT_GPT 39 -#define MX50_INT_EPIT1 40 -#define MX50_INT_GPIO1_INT7 42 -#define MX50_INT_GPIO1_INT6 43 -#define MX50_INT_GPIO1_INT5 44 -#define MX50_INT_GPIO1_INT4 45 -#define MX50_INT_GPIO1_INT3 46 -#define MX50_INT_GPIO1_INT2 47 -#define MX50_INT_GPIO1_INT1 48 -#define MX50_INT_GPIO1_INT0 49 -#define MX50_INT_GPIO1_LOW 50 -#define MX50_INT_GPIO1_HIGH 51 -#define MX50_INT_GPIO2_LOW 52 -#define MX50_INT_GPIO2_HIGH 53 -#define MX50_INT_GPIO3_LOW 54 -#define MX50_INT_GPIO3_HIGH 55 -#define MX50_INT_GPIO4_LOW 56 -#define MX50_INT_GPIO4_HIGH 57 -#define MX50_INT_WDOG1 58 -#define MX50_INT_KPP 60 -#define MX50_INT_PWM1 61 -#define MX50_INT_I2C1 62 -#define MX50_INT_I2C2 63 -#define MX50_INT_I2C3 64 -#define MX50_INT_RESV65 65 -#define MX50_INT_DCDC 66 -#define MX50_INT_THERMAL_ALARM 67 -#define MX50_INT_ANA3 68 -#define MX50_INT_ANA4 69 -#define MX50_INT_CCM1 71 -#define MX50_INT_CCM2 72 -#define MX50_INT_GPC1 73 -#define MX50_INT_GPC2 74 -#define MX50_INT_SRC 75 -#define MX50_INT_NM 76 -#define MX50_INT_PMU 77 -#define MX50_INT_CTI_IRQ 78 -#define MX50_INT_CTI1_TG0 79 -#define MX50_INT_CTI1_TG1 80 -#define MX50_INT_GPU2_IRQ 84 -#define MX50_INT_GPU2_BUSY 85 -#define MX50_INT_UART5 86 -#define MX50_INT_FEC 87 -#define MX50_INT_OWIRE 88 -#define MX50_INT_CTI1_TG2 89 -#define MX50_INT_SJC 90 -#define MX50_INT_DCP_CHAN1_3 91 -#define MX50_INT_DCP_CHAN0 92 -#define MX50_INT_PWM2 94 -#define MX50_INT_RNGB 97 -#define MX50_INT_CTI1_TG3 98 -#define MX50_INT_RAWNAND_BCH 100 -#define MX50_INT_RAWNAND_GPMI 102 -#define MX50_INT_GPIO5_LOW 103 -#define MX50_INT_GPIO5_HIGH 104 -#define MX50_INT_GPIO6_LOW 105 -#define MX50_INT_GPIO6_HIGH 106 -#define MX50_INT_MSHC 109 -#define MX50_INT_APBHDMA_CHAN0 110 -#define MX50_INT_APBHDMA_CHAN1 111 -#define MX50_INT_APBHDMA_CHAN2 112 -#define MX50_INT_APBHDMA_CHAN3 113 -#define MX50_INT_APBHDMA_CHAN4 114 -#define MX50_INT_APBHDMA_CHAN5 115 -#define MX50_INT_APBHDMA_CHAN6 116 -#define MX50_INT_APBHDMA_CHAN7 117 +#include <asm/irq.h> +#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1) +#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2) +#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3) +#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4) +#define MX50_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19) +#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20) +#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21) +#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27) +#define MX50_INT_NIC (NR_IRQS_LEGACY + 28) +#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36) +#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37) +#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX50_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX50_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66) +#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67) +#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68) +#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69) +#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX50_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX50_INT_NM (NR_IRQS_LEGACY + 76) +#define MX50_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX50_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX50_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91) +#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92) +#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97) +#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100) +#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102) +#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109) +#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110) +#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111) +#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112) +#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113) +#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114) +#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115) +#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116) +#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117) #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx50_revision(void); diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index cdf07c65ec1..af844f76261 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -232,110 +232,111 @@ /* * Interrupt numbers */ -#define MX51_INT_BASE 0 -#define MX51_INT_RESV0 0 -#define MX51_INT_ESDHC1 1 -#define MX51_INT_ESDHC2 2 -#define MX51_INT_ESDHC3 3 -#define MX51_INT_ESDHC4 4 -#define MX51_INT_RESV5 5 -#define MX51_INT_SDMA 6 -#define MX51_INT_IOMUX 7 -#define MX51_INT_NFC 8 -#define MX51_INT_VPU 9 -#define MX51_INT_IPU_ERR 10 -#define MX51_INT_IPU_SYN 11 -#define MX51_INT_GPU 12 -#define MX51_INT_RESV13 13 -#define MX51_INT_USB_HS1 14 -#define MX51_INT_EMI 15 -#define MX51_INT_USB_HS2 16 -#define MX51_INT_USB_HS3 17 -#define MX51_INT_USB_OTG 18 -#define MX51_INT_SAHARA_H0 19 -#define MX51_INT_SAHARA_H1 20 -#define MX51_INT_SCC_SMN 21 -#define MX51_INT_SCC_STZ 22 -#define MX51_INT_SCC_SCM 23 -#define MX51_INT_SRTC_NTZ 24 -#define MX51_INT_SRTC_TZ 25 -#define MX51_INT_RTIC 26 -#define MX51_INT_CSU 27 -#define MX51_INT_SLIM_B 28 -#define MX51_INT_SSI1 29 -#define MX51_INT_SSI2 30 -#define MX51_INT_UART1 31 -#define MX51_INT_UART2 32 -#define MX51_INT_UART3 33 -#define MX51_INT_RESV34 34 -#define MX51_INT_RESV35 35 -#define MX51_INT_ECSPI1 36 -#define MX51_INT_ECSPI2 37 -#define MX51_INT_CSPI 38 -#define MX51_INT_GPT 39 -#define MX51_INT_EPIT1 40 -#define MX51_INT_EPIT2 41 -#define MX51_INT_GPIO1_INT7 42 -#define MX51_INT_GPIO1_INT6 43 -#define MX51_INT_GPIO1_INT5 44 -#define MX51_INT_GPIO1_INT4 45 -#define MX51_INT_GPIO1_INT3 46 -#define MX51_INT_GPIO1_INT2 47 -#define MX51_INT_GPIO1_INT1 48 -#define MX51_INT_GPIO1_INT0 49 -#define MX51_INT_GPIO1_LOW 50 -#define MX51_INT_GPIO1_HIGH 51 -#define MX51_INT_GPIO2_LOW 52 -#define MX51_INT_GPIO2_HIGH 53 -#define MX51_INT_GPIO3_LOW 54 -#define MX51_INT_GPIO3_HIGH 55 -#define MX51_INT_GPIO4_LOW 56 -#define MX51_INT_GPIO4_HIGH 57 -#define MX51_INT_WDOG1 58 -#define MX51_INT_WDOG2 59 -#define MX51_INT_KPP 60 -#define MX51_INT_PWM1 61 -#define MX51_INT_I2C1 62 -#define MX51_INT_I2C2 63 -#define MX51_INT_HS_I2C 64 -#define MX51_INT_RESV65 65 -#define MX51_INT_RESV66 66 -#define MX51_INT_SIM_IPB 67 -#define MX51_INT_SIM_DAT 68 -#define MX51_INT_IIM 69 -#define MX51_INT_ATA 70 -#define MX51_INT_CCM1 71 -#define MX51_INT_CCM2 72 -#define MX51_INT_GPC1 73 -#define MX51_INT_GPC2 74 -#define MX51_INT_SRC 75 -#define MX51_INT_NM 76 -#define MX51_INT_PMU 77 -#define MX51_INT_CTI_IRQ 78 -#define MX51_INT_CTI1_TG0 79 -#define MX51_INT_CTI1_TG1 80 -#define MX51_INT_MCG_ERR 81 -#define MX51_INT_MCG_TMR 82 -#define MX51_INT_MCG_FUNC 83 -#define MX51_INT_GPU2_IRQ 84 -#define MX51_INT_GPU2_BUSY 85 -#define MX51_INT_RESV86 86 -#define MX51_INT_FEC 87 -#define MX51_INT_OWIRE 88 -#define MX51_INT_CTI1_TG2 89 -#define MX51_INT_SJC 90 -#define MX51_INT_SPDIF 91 -#define MX51_INT_TVE 92 -#define MX51_INT_FIRI 93 -#define MX51_INT_PWM2 94 -#define MX51_INT_SLIM_EXP 95 -#define MX51_INT_SSI3 96 -#define MX51_INT_EMI_BOOT 97 -#define MX51_INT_CTI1_TG3 98 -#define MX51_INT_SMC_RX 99 -#define MX51_INT_VPU_IDLE 100 -#define MX51_INT_EMI_NFC 101 -#define MX51_INT_GPU_IDLE 102 +#include <asm/irq.h> +#define MX51_INT_BASE (NR_IRQS_LEGACY + 0) +#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5) +#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX51_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX51_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX51_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13) +#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14) +#define MX51_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16) +#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17) +#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX51_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28) +#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX51_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX51_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64) +#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66) +#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67) +#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX51_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX51_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX51_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX51_INT_NM (NR_IRQS_LEGACY + 76) +#define MX51_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81) +#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82) +#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83) +#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86) +#define MX51_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX51_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91) +#define MX51_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx51_revision(void); diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index a37e8c35399..f829d1c2250 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -229,113 +229,114 @@ /* * Interrupt numbers */ -#define MX53_INT_RESV0 0 -#define MX53_INT_ESDHC1 1 -#define MX53_INT_ESDHC2 2 -#define MX53_INT_ESDHC3 3 -#define MX53_INT_ESDHC4 4 -#define MX53_INT_DAP 5 -#define MX53_INT_SDMA 6 -#define MX53_INT_IOMUX 7 -#define MX53_INT_NFC 8 -#define MX53_INT_VPU 9 -#define MX53_INT_IPU_ERR 10 -#define MX53_INT_IPU_SYN 11 -#define MX53_INT_GPU 12 -#define MX53_INT_UART4 13 -#define MX53_INT_USB_H1 14 -#define MX53_INT_EMI 15 -#define MX53_INT_USB_H2 16 -#define MX53_INT_USB_H3 17 -#define MX53_INT_USB_OTG 18 -#define MX53_INT_SAHARA_H0 19 -#define MX53_INT_SAHARA_H1 20 -#define MX53_INT_SCC_SMN 21 -#define MX53_INT_SCC_STZ 22 -#define MX53_INT_SCC_SCM 23 -#define MX53_INT_SRTC_NTZ 24 -#define MX53_INT_SRTC_TZ 25 -#define MX53_INT_RTIC 26 -#define MX53_INT_CSU 27 -#define MX53_INT_SATA 28 -#define MX53_INT_SSI1 29 -#define MX53_INT_SSI2 30 -#define MX53_INT_UART1 31 -#define MX53_INT_UART2 32 -#define MX53_INT_UART3 33 -#define MX53_INT_RTC 34 -#define MX53_INT_PTP 35 -#define MX53_INT_ECSPI1 36 -#define MX53_INT_ECSPI2 37 -#define MX53_INT_CSPI 38 -#define MX53_INT_GPT 39 -#define MX53_INT_EPIT1 40 -#define MX53_INT_EPIT2 41 -#define MX53_INT_GPIO1_INT7 42 -#define MX53_INT_GPIO1_INT6 43 -#define MX53_INT_GPIO1_INT5 44 -#define MX53_INT_GPIO1_INT4 45 -#define MX53_INT_GPIO1_INT3 46 -#define MX53_INT_GPIO1_INT2 47 -#define MX53_INT_GPIO1_INT1 48 -#define MX53_INT_GPIO1_INT0 49 -#define MX53_INT_GPIO1_LOW 50 -#define MX53_INT_GPIO1_HIGH 51 -#define MX53_INT_GPIO2_LOW 52 -#define MX53_INT_GPIO2_HIGH 53 -#define MX53_INT_GPIO3_LOW 54 -#define MX53_INT_GPIO3_HIGH 55 -#define MX53_INT_GPIO4_LOW 56 -#define MX53_INT_GPIO4_HIGH 57 -#define MX53_INT_WDOG1 58 -#define MX53_INT_WDOG2 59 -#define MX53_INT_KPP 60 -#define MX53_INT_PWM1 61 -#define MX53_INT_I2C1 62 -#define MX53_INT_I2C2 63 -#define MX53_INT_I2C3 64 -#define MX53_INT_MLB 65 -#define MX53_INT_ASRC 66 -#define MX53_INT_SPDIF 67 -#define MX53_INT_SIM_DAT 68 -#define MX53_INT_IIM 69 -#define MX53_INT_ATA 70 -#define MX53_INT_CCM1 71 -#define MX53_INT_CCM2 72 -#define MX53_INT_GPC1 73 -#define MX53_INT_GPC2 74 -#define MX53_INT_SRC 75 -#define MX53_INT_NM 76 -#define MX53_INT_PMU 77 -#define MX53_INT_CTI_IRQ 78 -#define MX53_INT_CTI1_TG0 79 -#define MX53_INT_CTI1_TG1 80 -#define MX53_INT_ESAI 81 -#define MX53_INT_CAN1 82 -#define MX53_INT_CAN2 83 -#define MX53_INT_GPU2_IRQ 84 -#define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_UART5 86 -#define MX53_INT_FEC 87 -#define MX53_INT_OWIRE 88 -#define MX53_INT_CTI1_TG2 89 -#define MX53_INT_SJC 90 -#define MX53_INT_TVE 92 -#define MX53_INT_FIRI 93 -#define MX53_INT_PWM2 94 -#define MX53_INT_SLIM_EXP 95 -#define MX53_INT_SSI3 96 -#define MX53_INT_EMI_BOOT 97 -#define MX53_INT_CTI1_TG3 98 -#define MX53_INT_SMC_RX 99 -#define MX53_INT_VPU_IDLE 100 -#define MX53_INT_EMI_NFC 101 -#define MX53_INT_GPU_IDLE 102 -#define MX53_INT_GPIO5_LOW 103 -#define MX53_INT_GPIO5_HIGH 104 -#define MX53_INT_GPIO6_LOW 105 -#define MX53_INT_GPIO6_HIGH 106 -#define MX53_INT_GPIO7_LOW 107 -#define MX53_INT_GPIO7_HIGH 108 +#include <asm/irq.h> +#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX53_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX53_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX53_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX53_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX53_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16) +#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17) +#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX53_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX53_INT_SATA (NR_IRQS_LEGACY + 28) +#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX53_INT_RTC (NR_IRQS_LEGACY + 34) +#define MX53_INT_PTP (NR_IRQS_LEGACY + 35) +#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX53_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX53_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX53_INT_MLB (NR_IRQS_LEGACY + 65) +#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66) +#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67) +#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX53_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX53_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX53_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX53_INT_NM (NR_IRQS_LEGACY + 76) +#define MX53_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81) +#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82) +#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83) +#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX53_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX53_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX53_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) +#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107) +#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108) #endif /* ifndef __MACH_MX53_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 9ffd1bbe615..7eb9d132967 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -20,13 +20,15 @@ #define MXC_EHCI_INTERFACE_MASK (0xf) #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) - -#define MXC_EHCI_INTERNAL_PHY (1 << 7) -#define MXC_EHCI_IPPUE_DOWN (1 << 8) -#define MXC_EHCI_IPPUE_UP (1 << 9) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 10) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) #define MXC_USBCTRL_OFFSET 0 #define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c deleted file mode 100644 index c0cab2270dd..00000000000 --- a/arch/arm/plat-mxc/pwm.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * simple driver for PWM (Pulse Width Modulator) controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> -#include <mach/hardware.h> - - -/* i.MX1 and i.MX21 share the same PWM function block: */ - -#define MX1_PWMC 0x00 /* PWM Control Register */ -#define MX1_PWMS 0x04 /* PWM Sample Register */ -#define MX1_PWMP 0x08 /* PWM Period Register */ - - -/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ - -#define MX3_PWMCR 0x00 /* PWM Control Register */ -#define MX3_PWMSAR 0x0C /* PWM Sample Register */ -#define MX3_PWMPR 0x10 /* PWM Period Register */ -#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) -#define MX3_PWMCR_DOZEEN (1 << 24) -#define MX3_PWMCR_WAITEN (1 << 23) -#define MX3_PWMCR_DBGEN (1 << 22) -#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) -#define MX3_PWMCR_CLKSRC_IPG (1 << 16) -#define MX3_PWMCR_EN (1 << 0) - - - -struct pwm_device { - struct list_head node; - struct platform_device *pdev; - - const char *label; - struct clk *clk; - - int clk_enabled; - void __iomem *mmio_base; - - unsigned int use_count; - unsigned int pwm_id; -}; - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - if (!(cpu_is_mx1() || cpu_is_mx21())) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - u32 cr; - - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); - writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - - cr = MX3_PWMCR_PRESCALER(prescale) | - MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (cpu_is_mx25()) - cr |= MX3_PWMCR_CLKSRC_IPG; - else - cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; - - writel(cr, pwm->mmio_base + MX3_PWMCR); - } else if (cpu_is_mx1() || cpu_is_mx21()) { - /* The PWM subsystem allows for exact frequencies. However, - * I cannot connect a scope on my device to the PWM line and - * thus cannot provide the program the PWM controller - * exactly. Instead, I'm relying on the fact that the - * Bootloader (u-boot or WinCE+haret) has programmed the PWM - * function group already. So I'll just modify the PWM sample - * register to follow the ratio of duty_ns vs. period_ns - * accordingly. - * - * This is good enough for programming the brightness of - * the LCD backlight. - * - * The real implementation would divide PERCLK[0] first by - * both the prescaler (/1 .. /128) and then by CLKSEL - * (/2 .. /16). - */ - u32 max = readl(pwm->mmio_base + MX1_PWMP); - u32 p = max * duty_ns / period_ns; - writel(max - p, pwm->mmio_base + MX1_PWMS); - } else { - BUG(); - } - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - int rc = 0; - - if (!pwm->clk_enabled) { - rc = clk_prepare_enable(pwm->clk); - if (!rc) - pwm->clk_enabled = 1; - } - return rc; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - writel(0, pwm->mmio_base + MX3_PWMCR); - - if (pwm->clk_enabled) { - clk_disable_unprepare(pwm->clk); - pwm->clk_enabled = 0; - } -} -EXPORT_SYMBOL(pwm_disable); - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - pr_warning("PWM device already freed\n"); - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static int __devinit mxc_pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - int ret = 0; - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - pwm->clk = clk_get(&pdev->dev, "pwm"); - - if (IS_ERR(pwm->clk)) { - ret = PTR_ERR(pwm->clk); - goto err_free; - } - - pwm->clk_enabled = 0; - - pwm->use_count = 0; - pwm->pwm_id = pdev->id; - pwm->pdev = pdev; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - pwm->mmio_base = ioremap(r->start, resource_size(r)); - if (pwm->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); - - platform_set_drvdata(pdev, pwm); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free_clk: - clk_put(pwm->clk); -err_free: - kfree(pwm); - return ret; -} - -static int __devexit mxc_pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - - pwm = platform_get_drvdata(pdev); - if (pwm == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - list_del(&pwm->node); - mutex_unlock(&pwm_lock); - - iounmap(pwm->mmio_base); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - clk_put(pwm->clk); - - kfree(pwm); - return 0; -} - -static struct platform_driver mxc_pwm_driver = { - .driver = { - .name = "mxc_pwm", - }, - .probe = mxc_pwm_probe, - .remove = __devexit_p(mxc_pwm_remove), -}; - -static int __init mxc_pwm_init(void) -{ - return platform_driver_register(&mxc_pwm_driver); -} -arch_initcall(mxc_pwm_init); - -static void __exit mxc_pwm_exit(void) -{ - platform_driver_unregister(&mxc_pwm_driver); -} -module_exit(mxc_pwm_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 00e8e659e66..a17abcf9832 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -160,7 +160,8 @@ static const char *clock_event_mode_label[] = { [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED", + [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME", }; #endif /* DEBUG */ diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 98308ec1f32..c2193178210 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -15,6 +15,8 @@ #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of.h> #include <asm/mach/irq.h> #include <asm/exception.h> @@ -49,6 +51,7 @@ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 @@ -77,15 +80,14 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) static void tzic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); } static void tzic_irq_resume(struct irq_data *d) { - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), tzic_base + TZIC_WAKEUP0(idx)); @@ -102,11 +104,10 @@ static struct mxc_extra_irq tzic_extra_irq = { #endif }; -static __init void tzic_init_gc(unsigned int irq_start) +static __init void tzic_init_gc(int idx, unsigned int irq_start) { struct irq_chip_generic *gc; struct irq_chip_type *ct; - int idx = irq_start >> 5; gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, handle_level_irq); @@ -140,7 +141,8 @@ asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) while (stat) { handled = 1; irqofs = fls(stat) - 1; - handle_IRQ(irqofs + i * 32, regs); + handle_IRQ(irq_find_mapping(domain, + irqofs + i * 32), regs); stat &= ~(1 << irqofs); } } @@ -154,6 +156,8 @@ asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) */ void __init tzic_init_irq(void __iomem *irqbase) { + struct device_node *np; + int irq_base; int i; tzic_base = irqbase; @@ -175,12 +179,20 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < TZIC_NUM_IRQS; i += 32) - tzic_init_gc(i); + irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,tzic"); + domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < 4; i++, irq_base += 32) + tzic_init_gc(i, irq_base); #ifdef CONFIG_FIQ /* Initialize FIQ */ - init_FIQ(); + init_FIQ(FIQ_START); #endif pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); @@ -190,6 +202,10 @@ void __init tzic_init_irq(void __iomem *irqbase) * tzic_enable_wake() - enable wakeup interrupt * * @return 0 if successful; non-zero otherwise + * + * This function provides an interrupt synchronization point that is required + * by tzic enabled platforms before entering imx specific low power modes (ie, + * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode). */ int tzic_enable_wake(void) { diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 8ba70ffc31e..00000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout(ms) - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - int timeout; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ad95c7a5d00..dd36eba9506 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS select USE_OF select PROC_DEVICETREE if PROC_FS help - "Systems based on OMAP2, OMAP3 or OMAP4" + "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" endchoice @@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS_CLASS -config OMAP_SMARTREFLEX - bool "SmartReflex support" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM +config POWER_AVS_OMAP + bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" + depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM help - Say Y if you want to enable SmartReflex. - - SmartReflex can perform continuous dynamic voltage - scaling around the nominal operating point voltage - according to silicon characteristics and operating - conditions. Enabling SmartReflex reduces power - consumption. + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or + version 2 of the SmartReflex IP. + V1 is the 65nm version used in OMAP3430. + V2 is the update for the 45nm version of the IP used in OMAP3630 + and OMAP4430 Please note, that by default SmartReflex is only - initialized. To enable the automatic voltage - compensation for vdd mpu and vdd core from user space, + initialized and not enabled. To enable the automatic voltage + compensation for vdd mpu and vdd core from user space, user must write 1 to - /debug/voltage/vdd_<X>/smartreflex/autocomp, - where X is mpu or core for OMAP3. + /debug/smartreflex/sr_<X>/autocomp, + where X is mpu_iva or core for OMAP3. Optionally autocompensation can be enabled in the kernel by default during system init via the enable_on_init flag which an be passed as platform data to the smartreflex driver. -config OMAP_SMARTREFLEX_CLASS3 +config POWER_AVS_OMAP_CLASS3 bool "Class 3 mode of Smartreflex Implementation" - depends on OMAP_SMARTREFLEX && TWL4030_CORE + depends on POWER_AVS_OMAP && TWL4030_CORE help Say Y to enable Class 3 implementation of Smartreflex @@ -150,7 +149,7 @@ config OMAP_32K_TIMER This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX, 34XX and OMAP4. + currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index ed8605f0115..961bf859bc0 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,15 +4,13 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - usb.o fb.o counter_32k.o + fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2) += omap_device.o -obj-$(CONFIG_ARCH_OMAP3) += omap_device.o -obj-$(CONFIG_ARCH_OMAP4) += omap_device.o +obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0a9b9a97011..89a3723b353 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -77,3 +77,12 @@ void __init omap_init_consistent_dma_size(void) init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); #endif } + +/* + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used + */ +int __weak omap_secure_ram_reserve_memblock(void) +{ + return 0; +} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 2132c4f389e..dbf1e03029a 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -29,7 +29,10 @@ #include <plat/clock.h> /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ -#define OMAP2_32KSYNCNT_CR_OFF 0x10 +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 /* * 32KHz clocksource ... always available, on pretty most chips except @@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) int ret; /* - * 32k sync Counter register offset is at 0x10 + * 32k sync Counter IP register offsets vary between the + * highlander version and the legacy ones. + * The 'SCHEME' bits(30-31) of the revision register is used + * to identify the version. */ - sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF; + if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; /* * 120000 rough estimate from the calculations in diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index cb16ade437c..7fe626761e5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { - u32 status; - /* Clear CSR */ if (cpu_class_is_omap1()) - status = p->dma_read(CSR, lch); - else if (cpu_class_is_omap2()) + p->dma_read(CSR, lch); + else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); /* Enable some nice interrupts. */ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } -static void omap_disable_channel_irq(int lch) +static inline void omap_disable_channel_irq(int lch) { - if (cpu_class_is_omap2()) - p->dma_write(0, CICR, lch); + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + if (cpu_class_is_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); } void omap_enable_dma_irq(int lch, u16 bits) @@ -632,14 +635,14 @@ static inline void disable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); /* Disable interrupts */ + omap_disable_channel_irq(lch); + if (cpu_class_is_omap1()) { - p->dma_write(0, CICR, lch); /* Set the STOP_LNK bit */ l |= 1 << 14; } if (cpu_class_is_omap2()) { - omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Enable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val |= 1 << lch; p->dma_write(val, IRQENABLE_L0, lch); @@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* Disable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val &= ~(1 << lch); p->dma_write(val, IRQENABLE_L0, lch); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); spin_unlock_irqrestore(&dma_chan_lock, flags); } @@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name, } if (cpu_class_is_omap2()) { - omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch); - p->dma_write(1 << free_ch, IRQSTATUS_L0, 0); + omap2_enable_irq_lch(free_ch); } *dma_ch_out = free_ch; @@ -768,27 +774,19 @@ void omap_free_dma(int lch) return; } - if (cpu_class_is_omap1()) { - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); - } - - if (cpu_class_is_omap2()) { + /* Disable interrupt for logical channel */ + if (cpu_class_is_omap2()) omap2_disable_irq_lch(lch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); - p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Disable all DMA interrupts for the channel. */ + omap_disable_channel_irq(lch); - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); + /* Make sure the DMA transfer is stopped. */ + p->dma_write(0, CCR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); + /* Clear registers */ + if (cpu_class_is_omap2()) omap_clear_dma(lch); - } spin_lock_irqsave(&dma_chan_lock, flags); dma_chan[lch].dev_id = -1; @@ -943,8 +941,7 @@ void omap_stop_dma(int lch) u32 l; /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - p->dma_write(0, CICR, lch); + omap_disable_channel_irq(lch); l = p->dma_read(CCR, lch); if (IS_DMA_ERRATA(DMA_ERRATA_i541) && diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 3b0cfeb33d0..626ad8cad7a 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -37,14 +37,16 @@ #include <linux/module.h> #include <linux/io.h> -#include <linux/slab.h> +#include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> #include <plat/dmtimer.h> +#include <plat/omap-pm.h> #include <mach/hardware.h> +static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -133,17 +135,22 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; int ret; - timer->fclk = clk_get(&timer->pdev->dev, "fck"); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { - timer->fclk = NULL; - dev_err(&timer->pdev->dev, ": No fclk handle.\n"); - return -EINVAL; + /* + * FIXME: OMAP1 devices do not use the clock framework for dmtimers so + * do not call clk_get() for these devices. + */ + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { + timer->fclk = clk_get(&timer->pdev->dev, "fck"); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { + timer->fclk = NULL; + dev_err(&timer->pdev->dev, ": No fclk handle.\n"); + return -EINVAL; + } } - if (pdata->needs_manual_reset) + if (timer->capability & OMAP_TIMER_NEEDS_RESET) omap_dm_timer_reset(timer); ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); @@ -152,6 +159,21 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) return ret; } +static inline u32 omap_dm_timer_reserved_systimer(int id) +{ + return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0; +} + +int omap_dm_timer_reserve_systimer(int id) +{ + if (omap_dm_timer_reserved_systimer(id)) + return -ENODEV; + + omap_reserved_systimers |= (1 << (id - 1)); + + return 0; +} + struct omap_dm_timer *omap_dm_timer_request(void) { struct omap_dm_timer *timer = NULL, *t; @@ -325,10 +347,9 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); - if (timer->loses_context) { - u32 ctx_loss_cnt_after = - timer->get_context_loss_count(&timer->pdev->dev); - if (ctx_loss_cnt_after != timer->ctx_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -347,20 +368,18 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); int omap_dm_timer_stop(struct omap_dm_timer *timer) { unsigned long rate = 0; - struct dmtimer_platform_data *pdata; if (unlikely(!timer)) return -EINVAL; - pdata = timer->pdev->dev.platform_data; - if (!pdata->needs_manual_reset) + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) rate = clk_get_rate(timer->fclk); __omap_dm_timer_stop(timer, timer->posted, rate); - if (timer->loses_context && timer->get_context_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) timer->ctx_loss_count = - timer->get_context_loss_count(&timer->pdev->dev); + omap_pm_get_dev_context_loss_count(&timer->pdev->dev); /* * Since the register values are computed and written within @@ -378,6 +397,8 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; + char *parent_name = NULL; + struct clk *fclk, *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -388,7 +409,49 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (source < 0 || source >= 3) return -EINVAL; - ret = pdata->set_timer_src(timer->pdev, source); + /* + * FIXME: Used for OMAP1 devices only because they do not currently + * use the clock framework to set the parent clock. To be removed + * once OMAP1 migrated to using clock framework for dmtimers + */ + if (pdata->set_timer_src) + return pdata->set_timer_src(timer->pdev, source); + + fclk = clk_get(&timer->pdev->dev, "fck"); + if (IS_ERR_OR_NULL(fclk)) { + pr_err("%s: fck not found\n", __func__); + return -EINVAL; + } + + switch (source) { + case OMAP_TIMER_SRC_SYS_CLK: + parent_name = "timer_sys_ck"; + break; + + case OMAP_TIMER_SRC_32_KHZ: + parent_name = "timer_32k_ck"; + break; + + case OMAP_TIMER_SRC_EXT_CLK: + parent_name = "timer_ext_ck"; + break; + } + + parent = clk_get(&timer->pdev->dev, parent_name); + if (IS_ERR_OR_NULL(parent)) { + pr_err("%s: %s not found\n", __func__, parent_name); + ret = -EINVAL; + goto out; + } + + ret = clk_set_parent(fclk, parent); + if (IS_ERR_VALUE(ret)) + pr_err("%s: failed to set %s as parent\n", __func__, + parent_name); + + clk_put(parent); +out: + clk_put(fclk); return ret; } @@ -431,10 +494,9 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); - if (timer->loses_context) { - u32 ctx_loss_cnt_after = - timer->get_context_loss_count(&timer->pdev->dev); - if (ctx_loss_cnt_after != timer->ctx_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -627,68 +689,57 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); */ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) { - int ret; unsigned long flags; struct omap_dm_timer *timer; - struct resource *mem, *irq, *ioarea; + struct resource *mem, *irq; + struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; if (!pdata) { - dev_err(&pdev->dev, "%s: no platform data.\n", __func__); + dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!irq)) { - dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__); + dev_err(dev, "%s: no IRQ resource.\n", __func__); return -ENODEV; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!mem)) { - dev_err(&pdev->dev, "%s: no memory resource.\n", __func__); + dev_err(dev, "%s: no memory resource.\n", __func__); return -ENODEV; } - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "%s: region already claimed.\n", __func__); - return -EBUSY; - } - - timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL); + timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL); if (!timer) { - dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n", - __func__); - ret = -ENOMEM; - goto err_free_ioregion; + dev_err(dev, "%s: memory alloc failed!\n", __func__); + return -ENOMEM; } - timer->io_base = ioremap(mem->start, resource_size(mem)); + timer->io_base = devm_request_and_ioremap(dev, mem); if (!timer->io_base) { - dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__); - ret = -ENOMEM; - goto err_free_mem; + dev_err(dev, "%s: region already claimed.\n", __func__); + return -ENOMEM; } timer->id = pdev->id; timer->irq = irq->start; - timer->reserved = pdata->reserved; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->loses_context = pdata->loses_context; - timer->get_context_loss_count = pdata->get_context_loss_count; + timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ - if (!pdata->needs_manual_reset) { - pm_runtime_enable(&pdev->dev); - pm_runtime_irq_safe(&pdev->dev); + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { + pm_runtime_enable(dev); + pm_runtime_irq_safe(dev); } if (!timer->reserved) { - pm_runtime_get_sync(&pdev->dev); + pm_runtime_get_sync(dev); __omap_dm_timer_init_regs(timer); - pm_runtime_put(&pdev->dev); + pm_runtime_put(dev); } /* add the timer element to the list */ @@ -696,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) list_add_tail(&timer->node, &omap_timer_list); spin_unlock_irqrestore(&dm_timer_lock, flags); - dev_dbg(&pdev->dev, "Device Probed.\n"); + dev_dbg(dev, "Device Probed.\n"); return 0; - -err_free_mem: - kfree(timer); - -err_free_ioregion: - release_mem_region(mem->start, resource_size(mem)); - - return ret; } /** @@ -727,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) list_for_each_entry(timer, &omap_timer_list, node) if (timer->pdev->id == pdev->id) { list_del(&timer->node); - kfree(timer); ret = 0; break; } diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 4814c5b6530..e62f20a5c0a 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -57,44 +57,6 @@ struct omap_camera_sensor_config { int (*power_off)(void * data); }; -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; - struct omap_lcd_config { char panel_name[16]; char ctrl_name[16]; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index d0ed8c443a6..025d85a3ee8 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -39,6 +39,7 @@ struct omap_clk { #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) #define CK_446X (1 << 13) +#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ #define CK_1710 (1 << 15) /* 1710 extra for rate selection */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index d0ef57c1d71..656b9862279 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -156,7 +156,6 @@ struct dpll_data { u8 min_divider; u16 max_divider; u8 modes; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; void __iomem *idlest_reg; u32 autoidle_mask; @@ -167,7 +166,6 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; -# endif u8 flags; }; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index de6c0a08f46..68b180edcff 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -9,7 +9,7 @@ * * Written by Tony Lindgren <tony.lindgren@nokia.com> * - * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -70,6 +70,7 @@ unsigned int omap_rev(void); * cpu_is_omap443x(): True for OMAP4430 * cpu_is_omap446x(): True for OMAP4460 * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap543x(): True for OMAP5430, OMAP5432 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) IS_AM_CLASS(35xx, 0x35) +IS_OMAP_CLASS(54xx, 0x54) IS_AM_CLASS(33xx, 0x33) IS_TI_CLASS(81xx, 0x81) @@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) IS_OMAP_SUBCLASS(446x, 0x446) IS_OMAP_SUBCLASS(447x, 0x447) +IS_OMAP_SUBCLASS(543x, 0x543) IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) @@ -150,12 +153,14 @@ IS_AM_SUBCLASS(335x, 0x335) #define cpu_is_ti816x() 0 #define cpu_is_ti814x() 0 #define soc_is_am35xx() 0 -#define cpu_is_am33xx() 0 -#define cpu_is_am335x() 0 +#define soc_is_am33xx() 0 +#define soc_is_am335x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 #define cpu_is_omap446x() 0 #define cpu_is_omap447x() 0 +#define soc_is_omap54xx() 0 +#define soc_is_omap543x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -238,9 +243,7 @@ IS_AM_SUBCLASS(335x, 0x335) /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap850(): True for OMAP850 + * cpu_is_omap310(): True for OMAP310 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 * cpu_is_omap1611(): True for OMAP1611 @@ -262,8 +265,6 @@ static inline int is_omap ##type (void) \ } IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(850, 0x0850) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) IS_OMAP_TYPE(1611, 0x1611) @@ -277,8 +278,6 @@ IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap850() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 #define cpu_is_omap5912() 0 @@ -291,22 +290,13 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap2430() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 +#define soc_is_omap5430() 0 /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. + * between 310 vs. 1510 and 1611B/5912 vs. 1710. */ -#if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -#endif - -#if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -#endif - #if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap310 # undef cpu_is_omap1510 @@ -344,8 +334,6 @@ IS_OMAP_TYPE(3430, 0x3430) # undef cpu_is_ti816x # undef cpu_is_ti814x # undef soc_is_am35xx -# undef cpu_is_am33xx -# undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() @@ -353,8 +341,13 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_ti816x() is_ti816x() # define cpu_is_ti814x() is_ti814x() # define soc_is_am35xx() is_am35xx() -# define cpu_is_am33xx() is_am33xx() -# define cpu_is_am335x() is_am335x() +#endif + +# if defined(CONFIG_SOC_AM33XX) +# undef soc_is_am33xx +# undef soc_is_am335x +# define soc_is_am33xx() is_am33xx() +# define soc_is_am335x() is_am335x() #endif # if defined(CONFIG_ARCH_OMAP4) @@ -368,11 +361,18 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_omap447x() is_omap447x() # endif +# if defined(CONFIG_SOC_OMAP5) +# undef soc_is_omap54xx +# undef soc_is_omap543x +# define soc_is_omap54xx() is_omap54xx() +# define soc_is_omap543x() is_omap543x() +#endif + /* Macros to detect if we have OMAP1 or OMAP2 */ #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx()) + cpu_is_omap44xx() || soc_is_omap54xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 @@ -408,7 +408,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM35XX_REV_ES1_0 AM35XX_CLASS #define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) -#define AM335X_CLASS 0x33500034 +#define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS #define OMAP443X_CLASS 0x44300044 @@ -425,9 +425,14 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP447X_CLASS 0x44700044 #define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) +#define OMAP54XX_CLASS 0x54000054 +#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) + void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); void omap4xxx_check_revision(void); +void omap5xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); void omap4xxx_check_features(void); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 5da73562e48..19e7fa577bd 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -55,23 +55,17 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 -/* - * IP revision identifier so that Highlander IP - * in OMAP4 can be distinguished. - */ -#define OMAP_TIMER_IP_VERSION_1 0x1 - /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 #define OMAP_TIMER_HAS_PWM 0x20000000 +#define OMAP_TIMER_NEEDS_RESET 0x10000000 struct omap_timer_capability_dev_attr { u32 timer_capability; }; struct omap_dm_timer; -struct clk; struct timer_regs { u32 tidr; @@ -96,16 +90,12 @@ struct timer_regs { }; struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); - int timer_ip_version; - u32 needs_manual_reset:1; - bool reserved; - - bool loses_context; - - int (*get_context_loss_count)(struct device *dev); + u32 timer_capability; }; +int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); int omap_dm_timer_free(struct omap_dm_timer *timer); @@ -272,13 +262,11 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; - bool loses_context; int ctx_loss_count; int revision; + u32 capability; struct platform_device *pdev; struct list_head node; - - int (*get_context_loss_count)(struct device *dev); }; int omap_dm_timer_prepare(struct omap_dm_timer *timer); diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h index 9c604b390f9..5927709b190 100644 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ b/arch/arm/plat-omap/include/plat/dsp.h @@ -18,6 +18,9 @@ struct omap_dsp_platform_data { u32 (*dsp_cm_read)(s16 , u16); u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + phys_addr_t phys_mempool_base; phys_addr_t phys_mempool_size; }; diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e897978371c..ddbde38e1e3 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -288,5 +288,6 @@ #include <plat/omap44xx.h> #include <plat/ti81xx.h> #include <plat/am33xx.h> +#include <plat/omap54xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 999ffba2690..045e320f106 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -99,4 +99,13 @@ # endif #endif +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index aeba71796ad..32394895920 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 8c7994ce986..0e4acd2d2de 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,12 +3,7 @@ #include <linux/types.h> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); -#else -static inline void omap_secure_ram_reserve_memblock(void) -{ } -#endif #ifdef CONFIG_OMAP4_ERRATA_I688 extern int omap_barrier_reserve_memblock(void); diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h new file mode 100644 index 00000000000..a2582bb3cab --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap54xx.h @@ -0,0 +1,32 @@ +/*: + * Address mappings and base address for OMAP5 interconnects + * and peripherals. + * + * Copyright (C) 2012 Texas Instruments + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_SOC_OMAP54XX_H +#define __ASM_SOC_OMAP54XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_54XX_BASE 0x4a000000 +#define L4_WK_54XX_BASE 0x4ae00000 +#define L4_PER_54XX_BASE 0x48000000 +#define L3_54XX_BASE 0x44000000 +#define OMAP54XX_32KSYNCT_BASE 0x4ae04000 +#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000 +#define OMAP54XX_CM_CORE_BASE 0x4a008000 +#define OMAP54XX_PRM_BASE 0x4ae06000 +#define OMAP54XX_PRCM_MPU_BASE 0x48243000 +#define OMAP54XX_SCM_BASE 0x4a002000 +#define OMAP54XX_CTRL_BASE 0x4a002800 + +#endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h deleted file mode 100644 index 14272bc1a6f..00000000000 --- a/arch/arm/plat-omap/include/plat/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h deleted file mode 100644 index c33f6798171..00000000000 --- a/arch/arm/plat-omap/include/plat/omap850.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap850.h - * - * Hardware definitions for TI OMAP850 processor. - * - * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP850_H -#define __ASM_ARCH_OMAP850_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP850_DSP_BASE 0xE0000000 -#define OMAP850_DSP_SIZE 0x50000 -#define OMAP850_DSP_START 0xE0000000 - -#define OMAP850_DSPREG_BASE 0xE1000000 -#define OMAP850_DSPREG_SIZE SZ_128K -#define OMAP850_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_CONFIG_BASE 0xfffe1000 -#define OMAP850_IO_CONF_0 0xfffe1070 -#define OMAP850_IO_CONF_1 0xfffe1074 -#define OMAP850_IO_CONF_2 0xfffe1078 -#define OMAP850_IO_CONF_3 0xfffe107c -#define OMAP850_IO_CONF_4 0xfffe1080 -#define OMAP850_IO_CONF_5 0xfffe1084 -#define OMAP850_IO_CONF_6 0xfffe1088 -#define OMAP850_IO_CONF_7 0xfffe108c -#define OMAP850_IO_CONF_8 0xfffe1090 -#define OMAP850_IO_CONF_9 0xfffe1094 -#define OMAP850_IO_CONF_10 0xfffe1098 -#define OMAP850_IO_CONF_11 0xfffe109c -#define OMAP850_IO_CONF_12 0xfffe10a0 -#define OMAP850_IO_CONF_13 0xfffe10a4 - -#define OMAP850_MODE_1 0xfffe1010 -#define OMAP850_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP850_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_FLASH_CFG_0 0xfffecc10 -#define OMAP850_FLASH_ACFG_0 0xfffecc50 -#define OMAP850_FLASH_CFG_1 0xfffecc14 -#define OMAP850_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_ICR_BASE 0xfffbb800 -#define OMAP850_DSP_M_CTL 0xfffbb804 -#define OMAP850_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP850_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index c835b7194ff..6132972aff3 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -41,6 +41,7 @@ struct omap_device; extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; +extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; /* * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant @@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) +#define SYSC_TYPE2_DMADISABLE_SHIFT 16 +#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) + +/* + * OCP SYSCONFIG bit shifts/masks TYPE3. + * This is applicable for some IPs present in AM33XX + */ +#define SYSC_TYPE3_SIDLEMODE_SHIFT 0 +#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) +#define SYSC_TYPE3_MIDLEMODE_SHIFT 2 +#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if { #define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ #define SYSC_HAS_RESET_STATUS (1 << 9) +#define SYSC_HAS_DMADISABLE (1 << 10) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if { * @enwkup_shift: Offset of the enawakeup bit * @srst_shift: Offset of the softreset bit * @autoidle_shift: Offset of the autoidle bit + * @dmadisable_shift: Offset of the dmadisable bit */ struct omap_hwmod_sysc_fields { u8 midle_shift; @@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields { u8 enwkup_shift; u8 srst_shift; u8 autoidle_shift; + u8 dmadisable_shift; }; /** @@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm { * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM + * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { u16 clkctrl_offs; u16 rstctrl_offs; + u16 rstst_offs; u16 context_offs; u8 submodule_wkdep_bit; u8 modulemode; @@ -629,6 +646,10 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); +extern void __init omap_hwmod_init(void); + +const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 9bb978ecd88..36d6a766621 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -123,7 +123,7 @@ struct omap_sdrc_params { u32 mr; }; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); #else diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index b073e5f2b19..65fce44dce3 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -60,6 +60,17 @@ /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 @@ -93,6 +104,9 @@ #define TI81XXUART1 81 #define TI81XXUART2 82 #define TI81XXUART3 83 +#define AM33XXUART1 84 +#define OMAP5UART3 OMAP4UART3 +#define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index cc3f11ba7a9..b8d19a13678 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -95,6 +95,9 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ OMAP4UART##p) +#define DEBUG_LL_OMAP5(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP5UART##p) /* Zoom2/3 shift is different for UART1 and external port */ #define DEBUG_LL_ZOOM(mach) \ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) @@ -103,6 +106,10 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ TI81XXUART##p) +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + static inline void __arch_decomp_setup(unsigned long arch_id) { int port = 0; @@ -173,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP4(3, omap_4430sdp); DEBUG_LL_OMAP4(3, omap4_panda); + /* omap5 based boards using UART3 */ + DEBUG_LL_OMAP5(3, omap5_sevm); + /* zoom2/3 external uart */ DEBUG_LL_ZOOM(omap_zoom2); DEBUG_LL_ZOOM(omap_zoom3); @@ -183,6 +193,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8148 base boards using UART1 */ DEBUG_LL_TI81XX(1, ti8148evm); + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); } while (0); } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 762eeb0626c..548a4c8d63d 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -44,6 +44,8 @@ struct usbhs_omap_board_data { struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; @@ -64,26 +66,6 @@ struct usbhs_omap_platform_data { }; /*-------------------------------------------------------------------------*/ -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - struct omap_musb_board_data { u8 interface_type; u8 mode; @@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); -/* - * NOTE: Please update omap USB drivers to use ioremap + read/write - */ - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) - -static inline u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} - - -static inline void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} - #endif extern void am35x_musb_reset(void); @@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); extern void ti81xx_musb_phy_power(u8 on); -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -void omap_otg_init(struct omap_usb_config *config); - -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) -void omap2_usbfs_init(struct omap_usb_config *pdata); -#else -static inline void omap2_usbfs_init(struct omap_usb_config *pdata) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 0a6a482ec01..5be4d5def42 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -11,10 +11,29 @@ #ifndef __ARCH_ARM_OMAP_VOLTAGE_H #define __ARCH_ARM_OMAP_VOLTAGE_H +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; struct voltagedomain; struct voltagedomain *voltdm_lookup(const char *name); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); - +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); #endif diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad32621aa52..5e13c3884aa 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -282,6 +282,8 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } mbox->rxq = mq; mq->mbox = mbox; + + omap_mbox_enable_irq(mbox, IRQ_RX); } mutex_unlock(&mbox_configured_lock); return 0; @@ -305,6 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) mutex_lock(&mbox_configured_lock); if (!--mbox->use_count) { + omap_mbox_disable_irq(mbox, IRQ_RX); free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); flush_work_sync(&mbox->rxq->work); @@ -338,13 +341,15 @@ struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) if (!mbox) return ERR_PTR(-ENOENT); - ret = omap_mbox_startup(mbox); - if (ret) - return ERR_PTR(-ENODEV); - if (nb) blocking_notifier_chain_register(&mbox->notifier, nb); + ret = omap_mbox_startup(mbox); + if (ret) { + blocking_notifier_chain_unregister(&mbox->notifier, nb); + return ERR_PTR(-ENODEV); + } + return mbox; } EXPORT_SYMBOL(omap_mbox_get); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 477363c163e..766181cb5c9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -6,8 +6,8 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -44,6 +44,7 @@ #else #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) #endif +#define OMAP5_SRAM_PA 0x40300000 #if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 @@ -85,7 +86,7 @@ static int is_sram_locked(void) __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } - if (cpu_is_omap34xx() && !cpu_is_am33xx()) { + if (cpu_is_omap34xx()) { __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ @@ -118,12 +119,15 @@ static void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_start = OMAP4_SRAM_PUB_PA; omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { - if (cpu_is_am33xx()) { + if (soc_is_am33xx()) { omap_sram_start = AM33XX_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap34xx()) { @@ -132,6 +136,9 @@ static void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_start = OMAP4_SRAM_PA; omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) @@ -386,7 +393,7 @@ int __init omap_sram_init(void) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); - else if (cpu_is_am33xx()) + else if (soc_is_am33xx()) am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c deleted file mode 100644 index daa0327381b..00000000000 --- a/arch/arm/plat-omap/usb.c +++ /dev/null @@ -1,145 +0,0 @@ - /* - * arch/arm/plat-omap/usb.c -- platform level USB initialization - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_OMAP_OTG - -void __init -omap_otg_init(struct omap_usb_config *config) -{ - u32 syscon; - int alt_pingroup = 0; - - /* NOTE: no bus or clock setup (yet?) */ - - syscon = omap_readl(OTG_SYSCON_1) & 0xffff; - if (!(syscon & OTG_RESET_DONE)) - pr_debug("USB resets not complete?\n"); - - //omap_writew(0, OTG_IRQ_EN); - - /* pin muxing and transceiver pinouts */ - if (config->pins[0] > 2) /* alt pingroup 2 */ - alt_pingroup = 1; - syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); - syscon |= config->usb1_init(config->pins[1]); - syscon |= config->usb2_init(config->pins[2], alt_pingroup); - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); - - syscon = config->hmc_mode; - syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; -#ifdef CONFIG_USB_OTG - if (config->otg) - syscon |= OTG_EN; -#endif - if (cpu_class_is_omap1()) - pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", - omap_readl(USB_TRANSCEIVER_CTRL)); - pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); - omap_writel(syscon, OTG_SYSCON_2); - - printk("USB: hmc %d", config->hmc_mode); - if (!alt_pingroup) - printk(", usb2 alt %d wires", config->pins[2]); - else if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (!alt_pingroup && config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - if (config->otg) - printk(", Mini-AB on usb%d", config->otg - 1); - printk("\n"); - - if (cpu_class_is_omap1()) { - u16 w; - - /* leave USB clocks/controllers off until needed */ - w = omap_readw(ULPD_SOFT_REQ); - w &= ~SOFT_USB_CLK_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - w = omap_readw(ULPD_CLOCK_CTRL); - w &= ~USB_MCLK_EN; - w |= DIS_USB_PVCI_CLK; - omap_writew(w, ULPD_CLOCK_CTRL); - } - syscon = omap_readl(OTG_SYSCON_1); - syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->otg || config->register_dev) { - struct platform_device *udc_device = config->udc_device; - int status; - - syscon &= ~DEV_IDLE_EN; - udc_device->dev.platform_data = config; - status = platform_device_register(udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->otg || config->register_host) { - struct platform_device *ohci_device = config->ohci_device; - int status; - - syscon &= ~HST_IDLE_EN; - ohci_device->dev.platform_data = config; - status = platform_device_register(ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - } -#endif - -#ifdef CONFIG_USB_OTG - if (config->otg) { - struct platform_device *otg_device = config->otg_device; - int status; - - syscon &= ~OTG_IDLE_EN; - otg_device->dev.platform_data = config; - status = platform_device_register(otg_device); - if (status) - pr_debug("can't register OTG device, %d\n", status); - } -#endif - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); -} - -#else -void omap_otg_init(struct omap_usb_config *config) {} -#endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index f302d048392..af8e484001e 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o -obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c deleted file mode 100644 index ef32686feef..00000000000 --- a/arch/arm/plat-pxa/pwm.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/pwm.c - * - * simple driver for PWM (Pulse Width Modulator) controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2008-02-13 initial version - * eric miao <eric.miao@marvell.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> - -#include <asm/div64.h> - -#define HAS_SECONDARY_PWM 0x10 -#define PWM_ID_BASE(d) ((d) & 0xf) - -static const struct platform_device_id pwm_id_table[] = { - /* PWM has_secondary_pwm? */ - { "pxa25x-pwm", 0 }, - { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM }, - { "pxa168-pwm", 1 }, - { "pxa910-pwm", 1 }, - { }, -}; -MODULE_DEVICE_TABLE(platform, pwm_id_table); - -/* PWM registers and bits definitions */ -#define PWMCR (0x00) -#define PWMDCR (0x04) -#define PWMPCR (0x08) - -#define PWMCR_SD (1 << 6) -#define PWMDCR_FD (1 << 10) - -struct pwm_device { - struct list_head node; - struct pwm_device *secondary; - struct platform_device *pdev; - - const char *label; - struct clk *clk; - int clk_enabled; - void __iomem *mmio_base; - - unsigned int use_count; - unsigned int pwm_id; -}; - -/* - * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE - * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE - */ -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long c; - unsigned long period_cycles, prescale, pv, dc; - - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - if (period_cycles < 1) - period_cycles = 1; - prescale = (period_cycles - 1) / 1024; - pv = period_cycles / (prescale + 1) - 1; - - if (prescale > 63) - return -EINVAL; - - if (duty_ns == period_ns) - dc = PWMDCR_FD; - else - dc = (pv + 1) * duty_ns / period_ns; - - /* NOTE: the clock to PWM has to be enabled first - * before writing to the registers - */ - clk_enable(pwm->clk); - __raw_writel(prescale, pwm->mmio_base + PWMCR); - __raw_writel(dc, pwm->mmio_base + PWMDCR); - __raw_writel(pv, pwm->mmio_base + PWMPCR); - clk_disable(pwm->clk); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - int rc = 0; - - if (!pwm->clk_enabled) { - rc = clk_enable(pwm->clk); - if (!rc) - pwm->clk_enabled = 1; - } - return rc; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - if (pwm->clk_enabled) { - clk_disable(pwm->clk); - pwm->clk_enabled = 0; - } -} -EXPORT_SYMBOL(pwm_disable); - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - pr_warning("PWM device already freed\n"); - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static inline void __add_pwm(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); -} - -static int __devinit pwm_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct pwm_device *pwm, *secondary = NULL; - struct resource *r; - int ret = 0; - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - pwm->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(pwm->clk)) { - ret = PTR_ERR(pwm->clk); - goto err_free; - } - pwm->clk_enabled = 0; - - pwm->use_count = 0; - pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id; - pwm->pdev = pdev; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - pwm->mmio_base = ioremap(r->start, resource_size(r)); - if (pwm->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - if (id->driver_data & HAS_SECONDARY_PWM) { - secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (secondary == NULL) { - ret = -ENOMEM; - goto err_free_mem; - } - - *secondary = *pwm; - pwm->secondary = secondary; - - /* registers for the second PWM has offset of 0x10 */ - secondary->mmio_base = pwm->mmio_base + 0x10; - secondary->pwm_id = pdev->id + 2; - } - - __add_pwm(pwm); - if (secondary) - __add_pwm(secondary); - - platform_set_drvdata(pdev, pwm); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free_clk: - clk_put(pwm->clk); -err_free: - kfree(pwm); - return ret; -} - -static int __devexit pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - - pwm = platform_get_drvdata(pdev); - if (pwm == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - - if (pwm->secondary) { - list_del(&pwm->secondary->node); - kfree(pwm->secondary); - } - - list_del(&pwm->node); - mutex_unlock(&pwm_lock); - - iounmap(pwm->mmio_base); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - clk_put(pwm->clk); - kfree(pwm); - return 0; -} - -static struct platform_driver pwm_driver = { - .driver = { - .name = "pxa25x-pwm", - .owner = THIS_MODULE, - }, - .probe = pwm_probe, - .remove = __devexit_p(pwm_remove), - .id_table = pwm_id_table, -}; - -static int __init pwm_init(void) -{ - return platform_driver_register(&pwm_driver); -} -arch_initcall(pwm_init); - -static void __exit pwm_exit(void) -{ - platform_driver_unregister(&pwm_driver); -} -module_exit(pwm_exit); - -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index bc42c04091f..fe57bbbf166 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -533,7 +533,7 @@ void __init s3c24xx_init_irq(void) int i; #ifdef CONFIG_FIQ - init_FIQ(); + init_FIQ(FIQ_START); #endif irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a2fae4ea093..7aca31c1df1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -78,6 +78,10 @@ config S5P_HRT # clock options +config SAMSUNG_CLOCK + bool + default y if !COMMON_CLK + config SAMSUNG_CLKSRC bool help @@ -491,14 +495,6 @@ config S5P_SLEEP Internal config node to apply common S5P sleep management code. Can be selected by S5P and newer SoCs with similar sleep procedure. -comment "Power Domain" - -config SAMSUNG_PD - bool "Samsung Power Domain" - depends on PM_RUNTIME - help - Say Y here if you want to control Power Domain by Runtime PM. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 860b2db4db1..9e40e8d0074 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,8 @@ obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-$(CONFIG_S5P_HRT) += s5p-time.o -obj-y += clock.o -obj-y += pwm-clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o @@ -59,11 +59,3 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o - -# PD support - -obj-$(CONFIG_SAMSUNG_PD) += pd.o - -# PWM support - -obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 33ecd0c9f0c..b1e05ccff3a 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client, return -EINVAL; } - if (client->is_ts && adc->ts_pend) - return -EAGAIN; - spin_lock_irqsave(&adc->lock, flags); + if (client->is_ts && adc->ts_pend) { + spin_unlock_irqrestore(&adc->lock, flags); + return -EAGAIN; + } + client->channel = channel; client->nr_samples = nr_samples; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d214cb9d77..74e31ce3553 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = { #ifdef CONFIG_CPU_S3C2440 static struct resource s3c_camif_resource[] = { [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), - [1] = DEFINE_RES_IRQ(IRQ_CAM), + [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C), + [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P), }; struct platform_device s3c_device_camif = { @@ -1512,7 +1513,7 @@ static struct resource s3c64xx_spi0_resource[] = { }; struct platform_device s3c64xx_device_spi0 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), .resource = s3c64xx_spi0_resource, @@ -1522,13 +1523,10 @@ struct platform_device s3c64xx_device_spi0 = { }, }; -void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1536,12 +1534,11 @@ void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi0_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } #endif /* CONFIG_S3C64XX_DEV_SPI0 */ @@ -1554,7 +1551,7 @@ static struct resource s3c64xx_spi1_resource[] = { }; struct platform_device s3c64xx_device_spi1 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), .resource = s3c64xx_spi1_resource, @@ -1564,26 +1561,20 @@ struct platform_device s3c64xx_device_spi1 = { }, }; -void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { pr_err("%s: Invalid SPI configuration\n", __func__); return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi1_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1596,7 +1587,7 @@ static struct resource s3c64xx_spi2_resource[] = { }; struct platform_device s3c64xx_device_spi2 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 2, .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource), .resource = s3c64xx_spi2_resource, @@ -1606,13 +1597,10 @@ struct platform_device s3c64xx_device_spi2 = { }, }; -void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1620,11 +1608,10 @@ void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi2_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } #endif /* CONFIG_S3C64XX_DEV_SPI2 */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index eb9f4f53400..c38d7548924 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -19,72 +19,79 @@ #include <mach/dma.h> static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { - struct dma_chan *chan; dma_cap_mask_t mask; - struct dma_slave_config slave_config; void *filter_param; dma_cap_zero(mask); - dma_cap_set(info->cap, mask); + dma_cap_set(param->cap, mask); /* * If a dma channel property of a device node from device tree is * specified, use that as the fliter parameter. */ - filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : - (void *)dma_ch; - chan = dma_request_channel(mask, pl330_filter, filter_param); + filter_param = (dma_ch == DMACH_DT_PROP) ? + (void *)param->dt_dmach_prop : (void *)dma_ch; + return (unsigned)dma_request_channel(mask, pl330_filter, filter_param); +} + +static int samsung_dmadev_release(unsigned ch, void *param) +{ + dma_release_channel((struct dma_chan *)ch); - if (info->direction == DMA_DEV_TO_MEM) { + return 0; +} + +static int samsung_dmadev_config(unsigned ch, + struct samsung_dma_config *param) +{ + struct dma_chan *chan = (struct dma_chan *)ch; + struct dma_slave_config slave_config; + + if (param->direction == DMA_DEV_TO_MEM) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.src_addr = info->fifo; - slave_config.src_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.src_addr = param->fifo; + slave_config.src_addr_width = param->width; slave_config.src_maxburst = 1; dmaengine_slave_config(chan, &slave_config); - } else if (info->direction == DMA_MEM_TO_DEV) { + } else if (param->direction == DMA_MEM_TO_DEV) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.dst_addr = info->fifo; - slave_config.dst_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.dst_addr = param->fifo; + slave_config.dst_addr_width = param->width; slave_config.dst_maxburst = 1; dmaengine_slave_config(chan, &slave_config); + } else { + pr_warn("unsupported direction\n"); + return -EINVAL; } - return (unsigned)chan; -} - -static int samsung_dmadev_release(unsigned ch, - struct s3c2410_dma_client *client) -{ - dma_release_channel((struct dma_chan *)ch); - return 0; } static int samsung_dmadev_prepare(unsigned ch, - struct samsung_dma_prep_info *info) + struct samsung_dma_prep *param) { struct scatterlist sg; struct dma_chan *chan = (struct dma_chan *)ch; struct dma_async_tx_descriptor *desc; - switch (info->cap) { + switch (param->cap) { case DMA_SLAVE: sg_init_table(&sg, 1); - sg_dma_len(&sg) = info->len; - sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)), - info->len, offset_in_page(info->buf)); - sg_dma_address(&sg) = info->buf; + sg_dma_len(&sg) = param->len; + sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)), + param->len, offset_in_page(param->buf)); + sg_dma_address(&sg) = param->buf; desc = dmaengine_prep_slave_sg(chan, - &sg, 1, info->direction, DMA_PREP_INTERRUPT); + &sg, 1, param->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = dmaengine_prep_dma_cyclic(chan, - info->buf, info->len, info->period, info->direction); + desc = dmaengine_prep_dma_cyclic(chan, param->buf, + param->len, param->period, param->direction); break; default: dev_err(&chan->dev->device, "unsupported format\n"); @@ -96,8 +103,8 @@ static int samsung_dmadev_prepare(unsigned ch, return -EFAULT; } - desc->callback = info->fp; - desc->callback_param = info->fp_param; + desc->callback = param->fp; + desc->callback_param = param->fp_param; dmaengine_submit((struct dma_async_tx_descriptor *)desc); @@ -119,6 +126,7 @@ static inline int samsung_dmadev_flush(unsigned ch) static struct samsung_dma_ops dmadev_ops = { .request = samsung_dmadev_request, .release = samsung_dmadev_release, + .config = samsung_dmadev_config, .prepare = samsung_dmadev_prepare, .trigger = samsung_dmadev_trigger, .started = NULL, diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 0721293fad6..ace4451b765 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -132,6 +132,10 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } +#ifndef KHZ +#define KHZ (1000) +#endif + #ifndef MHZ #define MHZ (1000*1000) #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 61ca2f356c5..5da4b4f38f4 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -131,7 +131,6 @@ extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos_device_drm; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 71a6827c770..f5144cdd300 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -16,7 +16,13 @@ #include <linux/dmaengine.h> #include <mach/dma.h> -struct samsung_dma_prep_info { +struct samsung_dma_req { + enum dma_transaction_type cap; + struct property *dt_dmach_prop; + struct s3c2410_dma_client *client; +}; + +struct samsung_dma_prep { enum dma_transaction_type cap; enum dma_transfer_direction direction; dma_addr_t buf; @@ -26,19 +32,17 @@ struct samsung_dma_prep_info { void *fp_param; }; -struct samsung_dma_info { - enum dma_transaction_type cap; +struct samsung_dma_config { enum dma_transfer_direction direction; enum dma_slave_buswidth width; dma_addr_t fifo; - struct s3c2410_dma_client *client; - struct property *dt_dmach_prop; }; struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info); - int (*release)(unsigned ch, struct s3c2410_dma_client *client); - int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info); + unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param); + int (*release)(unsigned ch, void *param); + int (*config)(unsigned ch, struct samsung_dma_config *param); + int (*prepare)(unsigned ch, struct samsung_dma_prep *param); int (*trigger)(unsigned ch); int (*started)(unsigned ch); int (*flush)(unsigned ch); diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 536002ff2ab..b885322717a 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -43,7 +43,6 @@ struct s3c_fb_pd_win { * @setup_gpio: Setup the external GPIO pins to the right state to transfer * the data from the display system to the connected display * device. - * @default_win: default window layer number to be used for UI layer. * @vidcon0: The base vidcon0 values to control the panel data format. * @vidcon1: The base vidcon1 values to control the panel data output. * @vtiming: Video timing when connected to a RGB type panel. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index df8155b9d4d..08740eed050 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,7 +24,7 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -#include<linux/types.h> +#include <linux/types.h> typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h deleted file mode 100644 index abb4bc32716..00000000000 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pd.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_SAMSUNG_PD_H -#define __ASM_PLAT_SAMSUNG_PD_H __FILE__ - -struct samsung_pd_info { - int (*enable)(struct device *dev); - int (*disable)(struct device *dev); - void __iomem *base; -}; - -enum exynos4_pd_block { - PD_MFC, - PD_G3D, - PD_LCD0, - PD_LCD1, - PD_TV, - PD_CAM, - PD_GPS -}; - -#endif /* __ASM_PLAT_SAMSUNG_PD_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index fa95e9a0097..ceba18d23a5 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -18,7 +18,6 @@ struct platform_device; * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. * @line: Custom 'identity' of the CS line. - * @set_level: CS line control. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the @@ -27,57 +26,41 @@ struct platform_device; struct s3c64xx_spi_csinfo { u8 fb_delay; unsigned line; - void (*set_level)(unsigned line_id, int lvl); }; /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. - * @clk_from_cmu: If the SPI clock/prescalar control block is present - * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. - * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 - * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number - * @high_speed: If the controller supports HIGH_SPEED_EN bit - * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; - bool clk_from_cmu; - int num_cs; - - int (*cfg_gpio)(struct platform_device *pdev); - - /* Following two fields are for future compatibility */ - int fifo_lvl_mask; - int rx_lvl_offset; - int high_speed; - int tx_st_done; + int (*cfg_gpio)(void); }; /** * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @pd: SPI platform data to set. + * @cfg_gpio: Pointer to gpio setup function. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); /* defined by architecture to configure gpio */ -extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev); +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c deleted file mode 100644 index 312b510d86b..00000000000 --- a/arch/arm/plat-samsung/pd.c +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-samsung/pd.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung Power domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> - -#include <plat/pd.h> - -static int samsung_pd_probe(struct platform_device *pdev) -{ - struct samsung_pd_info *pdata = pdev->dev.platform_data; - struct device *dev = &pdev->dev; - - if (!pdata) { - dev_err(dev, "no device data specified\n"); - return -ENOENT; - } - - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - dev_info(dev, "power domain registered\n"); - return 0; -} - -static int __devexit samsung_pd_remove(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_runtime_disable(dev); - return 0; -} - -static int samsung_pd_runtime_suspend(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->disable) - ret = pdata->disable(dev); - - dev_dbg(dev, "suspended\n"); - return ret; -} - -static int samsung_pd_runtime_resume(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->enable) - ret = pdata->enable(dev); - - dev_dbg(dev, "resumed\n"); - return ret; -} - -static const struct dev_pm_ops samsung_pd_pm_ops = { - .runtime_suspend = samsung_pd_runtime_suspend, - .runtime_resume = samsung_pd_runtime_resume, -}; - -static struct platform_driver samsung_pd_driver = { - .driver = { - .name = "samsung-pd", - .owner = THIS_MODULE, - .pm = &samsung_pd_pm_ops, - }, - .probe = samsung_pd_probe, - .remove = __devexit_p(samsung_pd_remove), -}; - -static int __init samsung_pd_init(void) -{ - int ret; - - ret = platform_driver_register(&samsung_pd_driver); - if (ret) - printk(KERN_ERR "%s: failed to add PD driver\n", __func__); - - return ret; -} -arch_initcall(samsung_pd_init); diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c deleted file mode 100644 index c559d8438c7..00000000000 --- a/arch/arm/plat-samsung/pwm.c +++ /dev/null @@ -1,420 +0,0 @@ -/* arch/arm/plat-s3c/pwm.c - * - * Copyright (c) 2007 Ben Dooks - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * S3C series PWM device core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> - -#include <mach/map.h> - -#include <plat/regs-timer.h> - -struct pwm_device { - struct list_head list; - struct platform_device *pdev; - - struct clk *clk_div; - struct clk *clk; - const char *label; - - unsigned int period_ns; - unsigned int duty_ns; - - unsigned char tcon_base; - unsigned char running; - unsigned char use_count; - unsigned char pwm_id; -}; - -#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) - -static struct clk *clk_scaler[2]; - -static inline int pwm_is_tdiv(struct pwm_device *pwm) -{ - return clk_get_parent(pwm->clk) == pwm->clk_div; -} - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, list) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count = 1; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} - -EXPORT_SYMBOL(pwm_request); - - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id); - - mutex_unlock(&pwm_lock); -} - -EXPORT_SYMBOL(pwm_free); - -#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) -#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) -#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) -#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) - -int pwm_enable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - pwm->running = 1; - return 0; -} - -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon &= ~pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - pwm->running = 0; -} - -EXPORT_SYMBOL(pwm_disable); - -static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) -{ - unsigned long tin_parent_rate; - unsigned int div; - - tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div)); - pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate); - - for (div = 2; div <= 16; div *= 2) { - if ((tin_parent_rate / (div << 16)) < freq) - return tin_parent_rate / div; - } - - return tin_parent_rate / 16; -} - -#define NS_IN_HZ (1000000000UL) - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long tin_rate; - unsigned long tin_ns; - unsigned long period; - unsigned long flags; - unsigned long tcon; - unsigned long tcnt; - long tcmp; - - /* We currently avoid using 64bit arithmetic by using the - * fact that anything faster than 1Hz is easily representable - * by 32bits. */ - - if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) - return -ERANGE; - - if (duty_ns > period_ns) - return -EINVAL; - - if (period_ns == pwm->period_ns && - duty_ns == pwm->duty_ns) - return 0; - - /* The TCMP and TCNT can be read without a lock, they're not - * shared between the timers. */ - - tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id)); - tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id)); - - period = NS_IN_HZ / period_ns; - - pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n", - duty_ns, period_ns, period); - - /* Check to see if we are changing the clock rate of the PWM */ - - if (pwm->period_ns != period_ns) { - if (pwm_is_tdiv(pwm)) { - tin_rate = pwm_calc_tin(pwm, period); - clk_set_rate(pwm->clk_div, tin_rate); - } else - tin_rate = clk_get_rate(pwm->clk); - - pwm->period_ns = period_ns; - - pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate); - - tin_ns = NS_IN_HZ / tin_rate; - tcnt = period_ns / tin_ns; - } else - tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk); - - /* Note, counters count down */ - - tcmp = duty_ns / tin_ns; - tcmp = tcnt - tcmp; - /* the pwm hw only checks the compare register after a decrement, - so the pin never toggles if tcmp = tcnt */ - if (tcmp == tcnt) - tcmp--; - - pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); - - if (tcmp < 0) - tcmp = 0; - - /* Update the PWM register block. */ - - local_irq_save(flags); - - __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id)); - __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id)); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_manulupdate(pwm); - tcon |= pwm_tcon_autoreload(pwm); - __raw_writel(tcon, S3C2410_TCON); - - tcon &= ~pwm_tcon_manulupdate(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(pwm_config); - -static int pwm_register(struct pwm_device *pwm) -{ - pwm->duty_ns = -1; - pwm->period_ns = -1; - - mutex_lock(&pwm_lock); - list_add_tail(&pwm->list, &pwm_list); - mutex_unlock(&pwm_lock); - - return 0; -} - -static int s3c_pwm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct pwm_device *pwm; - unsigned long flags; - unsigned long tcon; - unsigned int id = pdev->id; - int ret; - - if (id == 4) { - dev_err(dev, "TIMER4 is currently not supported\n"); - return -ENXIO; - } - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(dev, "failed to allocate pwm_device\n"); - return -ENOMEM; - } - - pwm->pdev = pdev; - pwm->pwm_id = id; - - /* calculate base of control bits in TCON */ - pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4; - - pwm->clk = clk_get(dev, "pwm-tin"); - if (IS_ERR(pwm->clk)) { - dev_err(dev, "failed to get pwm tin clk\n"); - ret = PTR_ERR(pwm->clk); - goto err_alloc; - } - - pwm->clk_div = clk_get(dev, "pwm-tdiv"); - if (IS_ERR(pwm->clk_div)) { - dev_err(dev, "failed to get pwm tdiv clk\n"); - ret = PTR_ERR(pwm->clk_div); - goto err_clk_tin; - } - - clk_enable(pwm->clk); - clk_enable(pwm->clk_div); - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_invert(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - - ret = pwm_register(pwm); - if (ret) { - dev_err(dev, "failed to register pwm\n"); - goto err_clk_tdiv; - } - - pwm_dbg(pwm, "config bits %02x\n", - (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f); - - dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", - clk_get_rate(pwm->clk), - clk_get_rate(pwm->clk_div), - pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base); - - platform_set_drvdata(pdev, pwm); - return 0; - - err_clk_tdiv: - clk_disable(pwm->clk_div); - clk_disable(pwm->clk); - clk_put(pwm->clk_div); - - err_clk_tin: - clk_put(pwm->clk); - - err_alloc: - kfree(pwm); - return ret; -} - -static int __devexit s3c_pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - - clk_disable(pwm->clk_div); - clk_disable(pwm->clk); - clk_put(pwm->clk_div); - clk_put(pwm->clk); - kfree(pwm); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - - /* No one preserve these values during suspend so reset them - * Otherwise driver leaves PWM unconfigured if same values - * passed to pwm_config - */ - pwm->period_ns = 0; - pwm->duty_ns = 0; - - return 0; -} - -static int s3c_pwm_resume(struct platform_device *pdev) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - unsigned long tcon; - - /* Restore invertion */ - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_invert(pwm); - __raw_writel(tcon, S3C2410_TCON); - - return 0; -} - -#else -#define s3c_pwm_suspend NULL -#define s3c_pwm_resume NULL -#endif - -static struct platform_driver s3c_pwm_driver = { - .driver = { - .name = "s3c24xx-pwm", - .owner = THIS_MODULE, - }, - .probe = s3c_pwm_probe, - .remove = __devexit_p(s3c_pwm_remove), - .suspend = s3c_pwm_suspend, - .resume = s3c_pwm_resume, -}; - -static int __init pwm_init(void) -{ - int ret; - - clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); - clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); - - if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { - printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__); - return -EINVAL; - } - - ret = platform_driver_register(&s3c_pwm_driver); - if (ret) - printk(KERN_ERR "%s: failed to add pwm driver\n", __func__); - - return ret; -} - -arch_initcall(pwm_init); diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index 78149491282..f99448c48d3 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -36,30 +36,26 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, } static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { struct cb_data *data; - if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) { - s3c2410_dma_free(dma_ch, info->client); + if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) { + s3c2410_dma_free(dma_ch, param->client); return 0; } + if (param->cap == DMA_CYCLIC) + s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); + data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); data->ch = dma_ch; list_add_tail(&data->node, &dma_list); - s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo); - - if (info->cap == DMA_CYCLIC) - s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); - - s3c2410_dma_config(dma_ch, info->width); - return (unsigned)dma_ch; } -static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) +static int s3c_dma_release(unsigned ch, void *param) { struct cb_data *data; @@ -68,16 +64,24 @@ static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) break; list_del(&data->node); - s3c2410_dma_free(ch, client); + s3c2410_dma_free(ch, param); kfree(data); return 0; } -static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) +static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param) +{ + s3c2410_dma_devconfig(ch, param->direction, param->fifo); + s3c2410_dma_config(ch, param->width); + + return 0; +} + +static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) { struct cb_data *data; - int len = (info->cap == DMA_CYCLIC) ? info->period : info->len; + int len = (param->cap == DMA_CYCLIC) ? param->period : param->len; list_for_each_entry(data, &dma_list, node) if (data->ch == ch) @@ -85,11 +89,11 @@ static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) if (!data->fp) { s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); - data->fp = info->fp; - data->fp_param = info->fp_param; + data->fp = param->fp; + data->fp_param = param->fp_param; } - s3c2410_dma_enqueue(ch, (void *)data, info->buf, len); + s3c2410_dma_enqueue(ch, (void *)data, param->buf, len); return 0; } @@ -117,6 +121,7 @@ static inline int s3c_dma_stop(unsigned ch) static struct samsung_dma_ops s3c_dma_ops = { .request = s3c_dma_request, .release = s3c_dma_release, + .config = s3c_dma_config, .prepare = s3c_dma_prepare, .trigger = s3c_dma_trigger, .started = s3c_dma_started, diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c index 031a61899be..48a15991103 100644 --- a/arch/arm/plat-samsung/s5p-clock.c +++ b/arch/arm/plat-samsung/s5p-clock.c @@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = { struct clk clk_xusbxti = { .name = "xusbxti", .id = -1, + .rate = 24000000, }; struct clk s5p_clk_27m = { diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h index 0562f134621..9248e3a7e33 100644 --- a/arch/arm/plat-spear/include/plat/keyboard.h +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -149,6 +149,7 @@ int _name[] = { \ * keymap: pointer to keymap data (table and size) * rep: enables key autorepeat * mode: choose keyboard support(9x9, 6x6, 2x2) + * suspended_rate: rate at which keyboard would operate in suspended mode * * This structure is supposed to be used by platform code to supply * keymaps to drivers that implement keyboards. @@ -157,6 +158,7 @@ struct kbd_platform_data { const struct matrix_keymap_data *keymap; bool rep; unsigned int mode; + unsigned int suspended_rate; }; #endif /* __PLAT_KEYBOARD_H */ diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 81ee7cc3445..8d5c10a5084 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,5 +1,8 @@ if PLAT_VERSATILE +config PLAT_VERSATILE_CLOCK + bool + config PLAT_VERSATILE_CLCD bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index a5cb1945bdc..272769a8a7d 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,4 +1,4 @@ -obj-y := clock.o +obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 49c7db48c7f..d7c5c171f5a 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -85,7 +85,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 3a0efaad609..ea0349f6358 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -16,6 +16,7 @@ */ #include <asm/thread_info.h> #include <asm/vfpmacros.h> +#include <linux/kern_levels.h> #include "../kernel/entry-header.S" .macro DBGSTR, str @@ -24,7 +25,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif @@ -37,7 +38,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif @@ -52,7 +53,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif |