diff options
Diffstat (limited to 'arch/arm')
343 files changed, 7450 insertions, 6428 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7e6d208fa8..2f88d8d9770 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,11 +6,12 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB @@ -37,7 +38,7 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE + select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP @@ -45,6 +46,9 @@ config ARM select GENERIC_SMP_IDLE_THREAD select KTIME_SCALAR select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -121,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -273,13 +272,12 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_FPGA_IRQ select NEED_MACH_IO_H select NEED_MACH_MEMORY_H @@ -372,6 +370,7 @@ config ARCH_HIGHBANK select ARM_TIMER_SP804 select CACHE_L2X0 select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU @@ -929,7 +928,7 @@ config ARCH_U300 select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help @@ -1006,7 +1005,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select HAVE_PWM help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. @@ -1147,6 +1145,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select COMMON_CLK config PLAT_PXA @@ -2004,6 +2003,25 @@ config ARM_ATAG_DTB_COMPAT bootloaders, this option allows zImage to extract the information from the ATAG list and store it at run time into the appended DTB. +choice + prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + +config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader instead of + the device tree bootargs property. If the boot loader doesn't provide + any, the device tree bootargs property will be used. + +config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND + bool "Extend with bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + +endchoice + config CMDLINE string "Default kernel command string" default "" @@ -2126,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a03b5a7059e..e968a52e488 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. @@ -395,4 +395,13 @@ config ARM_KPROBES_TEST help Perform tests of kprobes API and instruction set simulation. +config PID_IN_CONTEXTIDR + bool "Write the current PID to the CONTEXTIDR register" + depends on CPU_COPY_V6 + help + Enabling this option causes the kernel to write the current PID to + the PROCID field of the CONTEXTIDR register, at the expense of some + additional instructions during context switch. Say Y here only if you + are planning to use hardware trace tools with this kernel. + endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4d6d31115cf..a051dfbdd7d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -10,6 +10,9 @@ # # Copyright (C) 1995-2001 by Russell King +# Ensure linker flags are correct +LDFLAGS := + LDFLAGS_vmlinux :=-p --no-undefined -X ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 @@ -281,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 797f04bedb4..aabc02a6848 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -1,6 +1,12 @@ #include <asm/setup.h> #include <libfdt.h> +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) +#define do_extend_cmdline 1 +#else +#define do_extend_cmdline 0 +#endif + static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); @@ -36,6 +42,48 @@ static int setprop_cell(void *fdt, const char *node_path, return fdt_setprop_cell(fdt, offset, property, val); } +static const void *getprop(const void *fdt, const char *node_path, + const char *property, int *len) +{ + int offset = fdt_path_offset(fdt, node_path); + + if (offset == -FDT_ERR_NOTFOUND) + return NULL; + + return fdt_getprop(fdt, offset, property, len); +} + +static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) +{ + char cmdline[COMMAND_LINE_SIZE]; + const char *fdt_bootargs; + char *ptr = cmdline; + int len = 0; + + /* copy the fdt command line into the buffer */ + fdt_bootargs = getprop(fdt, "/chosen", "bootargs", &len); + if (fdt_bootargs) + if (len < COMMAND_LINE_SIZE) { + memcpy(ptr, fdt_bootargs, len); + /* len is the length of the string + * including the NULL terminator */ + ptr += len - 1; + } + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } + } + *ptr = '\0'; + + setprop_string(fdt, "/chosen", "bootargs", cmdline); +} + /* * Convert and fold provided ATAGs into the provided FDT. * @@ -72,8 +120,18 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) for_each_tag(atag, atag_list) { if (atag->hdr.tag == ATAG_CMDLINE) { - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); + /* Append the ATAGS command line to the device tree + * command line. + * NB: This means that if the same parameter is set in + * the device tree and in the tags, the one from the + * tags will be chosen. + */ + if (do_extend_cmdline) + merge_fdt_bootargs(fdt, + atag->u.cmdline.cmdline); + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80baf..81769c1341f 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e..bd0cff3f808 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e1fa7e6edfe..71d6b5d0daf 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -12,7 +12,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * - * Contains definitions specific to the Armada 370 SoC that are not + * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. */ diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1c6f6..7c95f76398d 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6ce9eb..195019b7ca0 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb2..96514c134e5 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa8806fc1..63751b1e744 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0dfc332..ef9336ae961 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c393b13..8a387a8d61b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 83e72294aef..9fecf1ae777 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -1,5 +1,5 @@ /* - * Copyright 2011 Calxeda, Inc. + * Copyright 2011-2012 Calxeda, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -24,6 +24,7 @@ compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; + clock-ranges; cpus { #address-cells = <1>; @@ -33,24 +34,32 @@ compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@1 { compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@2 { compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@3 { compatible = "arm,cortex-a9"; reg = <3>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; }; @@ -75,12 +84,14 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xfff10600 0x20>; interrupts = <1 13 0xf01>; + clocks = <&a9periphclk>; }; watchdog@fff10620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xfff10620 0x20>; interrupts = <1 14 0xf01>; + clocks = <&a9periphclk>; }; intc: interrupt-controller@fff11000 { @@ -116,12 +127,21 @@ compatible = "calxeda,hb-sdhci"; reg = <0xffe0e000 0x1000>; interrupts = <0 90 4>; + clocks = <&eclk>; + }; + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; }; ipc@fff20000 { compatible = "arm,pl320", "arm,primecell"; reg = <0xfff20000 0x1000>; interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioe: gpio@fff30000 { @@ -130,6 +150,8 @@ gpio-controller; reg = <0xfff30000 0x1000>; interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiof: gpio@fff31000 { @@ -138,6 +160,8 @@ gpio-controller; reg = <0xfff31000 0x1000>; interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiog: gpio@fff32000 { @@ -146,6 +170,8 @@ gpio-controller; reg = <0xfff32000 0x1000>; interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioh: gpio@fff33000 { @@ -154,24 +180,32 @@ gpio-controller; reg = <0xfff33000 0x1000>; interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer { compatible = "arm,sp804", "arm,primecell"; reg = <0xfff34000 0x1000>; interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@fff35000 { compatible = "arm,pl031", "arm,primecell"; reg = <0xfff35000 0x1000>; interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; smic@fff3a000 { @@ -186,12 +220,79 @@ sregs@fff3c000 { compatible = "calxeda,hb-sregs"; reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; + }; + + sregs@fff3c200 { + compatible = "calxeda,hb-sregs-l2-ecc"; + reg = <0xfff3c200 0x100>; + interrupts = <0 71 4 0 72 4>; }; dma@fff3d000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfff3d000 0x1000>; interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ethernet@fff50000 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae..e6138310e5c 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e..0a8978a40ec 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5a..5303ab680a3 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 915db89e364..3fa6d190fab 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,8 +658,9 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; + clock-frequency = <100000>; status = "disabled"; }; @@ -667,21 +668,22 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; + clock-frequency = <100000>; status = "disabled"; }; pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e..59d9789e550 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 922adefdd29..aba28dc87fc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { @@ -127,7 +131,7 @@ }; gpio1: gpio@73f84000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; interrupts = <50 51>; gpio-controller; @@ -137,7 +141,7 @@ }; gpio2: gpio@73f88000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f88000 0x4000>; interrupts = <52 53>; gpio-controller; @@ -147,7 +151,7 @@ }; gpio3: gpio@73f8c000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f8c000 0x4000>; interrupts = <54 55>; gpio-controller; @@ -157,7 +161,7 @@ }; gpio4: gpio@73f90000 { - compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f90000 0x4000>; interrupts = <56 57>; gpio-controller; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbee..da895e93a99 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 4e735edc78e..cd37165edce 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { @@ -129,7 +136,7 @@ }; gpio1: gpio@53f84000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; interrupts = <50 51>; gpio-controller; @@ -139,7 +146,7 @@ }; gpio2: gpio@53f88000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f88000 0x4000>; interrupts = <52 53>; gpio-controller; @@ -149,7 +156,7 @@ }; gpio3: gpio@53f8c000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f8c000 0x4000>; interrupts = <54 55>; gpio-controller; @@ -159,7 +166,7 @@ }; gpio4: gpio@53f90000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f90000 0x4000>; interrupts = <56 57>; gpio-controller; @@ -197,7 +204,7 @@ }; gpio5: gpio@53fdc000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; interrupts = <103 104>; gpio-controller; @@ -207,7 +214,7 @@ }; gpio6: gpio@53fe0000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fe0000 0x4000>; interrupts = <105 106>; gpio-controller; @@ -217,7 +224,7 @@ }; gpio7: gpio@53fe4000 { - compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fe4000 0x4000>; interrupts = <107 108>; gpio-controller; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb9..72f30f3e617 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index c25d4958481..fd57079f71a 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { @@ -277,7 +284,7 @@ }; gpio1: gpio@0209c000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 0x04 0 67 0x04>; gpio-controller; @@ -287,7 +294,7 @@ }; gpio2: gpio@020a0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 0x04 0 69 0x04>; gpio-controller; @@ -297,7 +304,7 @@ }; gpio3: gpio@020a4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 0x04 0 71 0x04>; gpio-controller; @@ -307,7 +314,7 @@ }; gpio4: gpio@020a8000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 0x04 0 73 0x04>; gpio-controller; @@ -317,7 +324,7 @@ }; gpio5: gpio@020ac000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 0x04 0 75 0x04>; gpio-controller; @@ -327,7 +334,7 @@ }; gpio6: gpio@020b0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 0x04 0 77 0x04>; gpio-controller; @@ -337,7 +344,7 @@ }; gpio7: gpio@020b4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 0x04 0 79 0x04>; gpio-controller; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index dc09a735b04..5bb0bf39d3b 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,10 +1,10 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; - compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + blue-power { + label = "dns320:blue:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + blue-usb { + label = "dns320:blue:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + orange-l_hdd { + label = "dns320:orange:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + orange-r_hdd { + label = "dns320:orange:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + orange-usb { + label = "dns320:orange:usb"; + gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + }; + }; + ocp@f1000000 { serial@12000 { clock-frequency = <166666667>; @@ -25,40 +50,5 @@ clock-frequency = <166666667>; status = "okay"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index c2a5562525d..d430713ea9b 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,10 +1,10 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; - compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -15,45 +15,43 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + white-power { + label = "dns325:white:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + white-usb { + label = "dns325:white:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + red-l_hdd { + label = "dns325:red:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ }; + red-r_hdd { + label = "dns325:red:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + red-usb { + label = "dns325:red:usb"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + }; + }; - nand@3000000 { + ocp@f1000000 { + i2c@11000 { status = "okay"; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; + lm75: lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; }; }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi new file mode 100644 index 00000000000..7408655f91b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -0,0 +1,69 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS NASes (kirkwood-based)"; + compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power button"; + linux,code = <116>; + gpios = <&gpio1 2 1>; + }; + button@2 { + label = "USB unmount button"; + linux,code = <161>; + gpios = <&gpio1 15 1>; + }; + button@3 { + label = "Reset button"; + linux,code = <0x198>; + gpios = <&gpio1 16 1>; + }; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index a5376b84227..26e281fbf6b 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -4,7 +4,7 @@ / { model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -20,5 +20,55 @@ clock-frequency = <200000000>; status = "ok"; }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l1606e"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "u-boot env"; + }; + + partition@180000 { + reg = <0x180000 0x10000>; + label = "dtb"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + bluetooth { + label = "dreamplug:blue:bluetooth"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "dreamplug:green:wifi"; + gpios = <&gpio1 16 1>; + }; + wifi-ap { + label = "dreamplug:green:wifi_ap"; + gpios = <&gpio1 17 1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 00000000000..7c8238fbb6f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 0>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 0>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 0>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 0>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 0>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 0>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 0>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index ada0f0c2308..66794ed75ff 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -4,7 +4,7 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; @@ -41,4 +46,37 @@ }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 29 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 28 1>; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 0>; + linux,default-trigger = "default-on"; + }; + red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 0>; + }; + usb-copy { + label = "ib62x0:red:usb_copy"; + gpios = <&gpio0 27 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 1ba75d4adec..f8ca6fa8819 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -4,7 +4,7 @@ / { model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -18,9 +18,55 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; }; }; + gpio-leds { + compatible = "gpio-leds"; + + led-level { + label = "led_level"; + gpios = <&gpio1 9 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "power:blue"; + gpios = <&gpio1 10 0>; + linux,default-trigger = "timer"; + }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; + usb1 { + label = "usb1:blue"; + gpios = <&gpio1 12 0>; + }; + usb2 { + label = "usb2:blue"; + gpios = <&gpio1 13 0>; + }; + usb3 { + label = "usb3:blue"; + gpios = <&gpio1 14 0>; + }; + usb4 { + label = "usb4:blue"; + gpios = <&gpio1 15 0>; + }; + otb { + label = "otb:blue"; + gpios = <&gpio1 16 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts new file mode 100644 index 00000000000..9510c9ea666 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-CHLv2"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts new file mode 100644 index 00000000000..739019c4cba --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-XHL"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi new file mode 100644 index 00000000000..8ac51c08269 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -0,0 +1,95 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Function Button"; + linux,code = <132>; + gpios = <&gpio1 9 1>; + }; + button@2 { + label = "Power-on Switch"; + linux,code = <116>; + gpios = <&gpio1 10 1>; + }; + button@3 { + label = "Power-auto Switch"; + linux,code = <142>; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "lschlv2:blue:func"; + gpios = <&gpio1 4 1>; + }; + + led@2 { + label = "lschlv2:red:alarm"; + gpios = <&gpio1 5 1>; + }; + + led@3 { + label = "lschlv2:amber:info"; + gpios = <&gpio1 6 1>; + }; + + led@4 { + label = "lschlv2:blue:power"; + gpios = <&gpio1 7 1>; + linux,default-trigger = "default-on"; + }; + + led@5 { + label = "lschlv2:red:func"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts new file mode 100644 index 00000000000..ccbf3275780 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 15 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 16 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts new file mode 100644 index 00000000000..fbe9932161a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio1 11 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio1 5 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi new file mode 100644 index 00000000000..64ea27cb329 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -0,0 +1,78 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "QNAP TS219 family"; + compatible = "qnap,ts219", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <200000000>; + status = "okay"; + }; + spi@10600 { + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0000000 { + reg = <0x00000000 0x00080000>; + label = "U-Boot"; + }; + + partition@00200000 { + reg = <0x00200000 0x00200000>; + label = "Kernel"; + }; + + partition@00400000 { + reg = <0x00400000 0x00900000>; + label = "RootFS1"; + }; + partition@00d00000 { + reg = <0x00d00000 0x00300000>; + label = "RootFS2"; + }; + partition@00040000 { + reg = <0x00080000 0x00040000>; + label = "U-Boot Config"; + }; + partition@000c0000 { + reg = <0x000c0000 0x00140000>; + label = "NAS Config"; + }; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 926528b81ba..cef9616f330 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,7 +1,16 @@ /include/ "skeleton.dtsi" / { - compatible = "mrvl,kirkwood"; + compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; ocp@f1000000 { compatible = "simple-bus"; @@ -9,6 +18,24 @@ #address-cells = <1>; #size-cells = <1>; + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; + + gpio1: gpio@10140 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10140 0x40>; + ngpio = <18>; + interrupts = <39>, <40>, <41>; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -28,22 +55,55 @@ }; rtc@10300 { - compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc"; + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + status = "disabled"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; cle = <0>; ale = <1>; bank-width = <1>; - compatible = "mrvl,orion-nand"; + compatible = "marvell,orion-nand"; reg = <0x3000000 0x400>; chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi new file mode 100644 index 00000000000..798fa35c000 --- /dev/null +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -0,0 +1,21 @@ +/* + * Device Tree Source for the r8a7740 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7740"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7377.dtsi new file mode 100644 index 00000000000..767ee0796da --- /dev/null +++ b/arch/arm/boot/dts/sh7377.dtsi @@ -0,0 +1,21 @@ +/* + * Device Tree Source for the sh7377 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,sh7377"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f..27fb8a67ea4 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -276,9 +276,11 @@ usb@c5000000 { status = "okay"; + nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ }; usb@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9f1921634eb..405d1673904 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -123,6 +123,12 @@ status = "disabled"; }; + pwm { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; + i2c@7000c000 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index da740191771..3e4334d14ef 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -117,6 +117,12 @@ status = "disabled"; }; + pwm { + compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; + i2c@7000c000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7e..d351b27d721 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index aa07f5938f0..1143c4d5c56 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -452,6 +452,7 @@ static struct dma_map_ops dmabounce_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, + .get_sgtable = arm_dma_get_sgtable, .map_page = dmabounce_map_page, .unmap_page = dmabounce_unmap_page, .sync_single_for_cpu = dmabounce_sync_for_cpu, diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index ddc9fe6a78a..90610c7030f 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -5,10 +5,7 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -21,7 +18,7 @@ CONFIG_ARCH_SHMOBILE=y CONFIG_ARCH_R8A7740=y CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y # CONFIG_CACHE_L2X0 is not set CONFIG_ARM_ERRATA_430973=y @@ -36,9 +33,10 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_NET=y @@ -89,26 +87,32 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_DEV=y +# CONFIG_RC_CORE is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +# CONFIG_V4L_USB_DRIVERS is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9T112=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set -CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y @@ -116,6 +120,8 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_DNOTIFY is not set @@ -124,7 +130,6 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_V4_1=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b3..3c9f32f9b6b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig new file mode 100644 index 00000000000..26146ffea1a --- /dev/null +++ b/arch/arm/configs/kzm9d_defconfig @@ -0,0 +1,89 @@ +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_EMEV2=y +CONFIG_MACH_KZM9D=y +CONFIG_MEMORY_START=0x40000000 +CONFIG_MEMORY_SIZE=0x10000000 +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_SWP_EMULATE is not set +# CONFIG_CACHE_L2X0 is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +# CONFIG_LOCAL_TIMERS is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE_FORCE=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EM=y +# CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_EM=y +# CONFIG_HWMON is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index e3ebc20ed0a..2388c861062 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -100,7 +100,12 @@ CONFIG_SND_SOC_SH4_FSI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_R8A66597_HCD=y +CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_SDHI=y @@ -108,12 +113,13 @@ CONFIG_MMC_SH_MMCIF=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RS5C372=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set +CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb7..4edcfb4e4de 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b152de79fd9..e58edc36b40 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -193,6 +193,8 @@ CONFIG_MMC_OMAP_HS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_DMADEVICES=y +CONFIG_DMA_OMAP=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458be..71277a1591b 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 4be9c1e80ee..db2245353f0 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -106,6 +106,7 @@ CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TPS6586X=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_SENSORS_LM90=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf..da6845493ca 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index ed2e95d46e2..62e75475e57 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -1,7 +1,10 @@ #ifndef __ASMARM_ARCH_TIMER_H #define __ASMARM_ARCH_TIMER_H +#include <asm/errno.h> + #ifdef CONFIG_ARM_ARCH_TIMER +#define ARCH_HAS_READ_CURRENT_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); #else diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0..5c8b3bf4d82 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 004c1bc95d2..e4448e16046 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -215,7 +215,9 @@ static inline void vivt_flush_cache_mm(struct mm_struct *mm) static inline void vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), vma->vm_flags); } @@ -223,7 +225,9 @@ vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned static inline void vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { unsigned long addr = user_addr & PAGE_MASK; __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); } diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index b2deda18154..dc6145120de 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -6,9 +6,22 @@ #ifndef __ASM_ARM_DELAY_H #define __ASM_ARM_DELAY_H +#include <asm/memory.h> #include <asm/param.h> /* HZ */ -extern void __delay(int loops); +#define MAX_UDELAY_MS 2 +#define UDELAY_MULT ((UL(2199023) * HZ) >> 11) +#define UDELAY_SHIFT 30 + +#ifndef __ASSEMBLY__ + +extern struct arm_delay_ops { + void (*delay)(unsigned long); + void (*const_udelay)(unsigned long); + void (*udelay)(unsigned long); +} arm_delay_ops; + +#define __delay(n) arm_delay_ops.delay(n) /* * This function intentionally does not exist; if you see references to @@ -23,22 +36,27 @@ extern void __bad_udelay(void); * division by multiplication: you don't have to worry about * loss of precision. * - * Use only for very small delays ( < 1 msec). Should probably use a + * Use only for very small delays ( < 2 msec). Should probably use a * lookup table, really, as the multiplications take much too long with * short delays. This is a "reasonable" implementation, though (and the * first constant multiplications gets optimized away if the delay is * a constant) */ -extern void __udelay(unsigned long usecs); -extern void __const_udelay(unsigned long); - -#define MAX_UDELAY_MS 2 +#define __udelay(n) arm_delay_ops.udelay(n) +#define __const_udelay(n) arm_delay_ops.const_udelay(n) #define udelay(n) \ (__builtin_constant_p(n) ? \ ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * ((2199023U*HZ)>>11))) : \ + __const_udelay((n) * UDELAY_MULT)) : \ __udelay(n)) +/* Loop-based definitions for assembly code. */ +extern void __loop_delay(unsigned long loops); +extern void __loop_udelay(unsigned long usecs); +extern void __loop_const_udelay(unsigned long); + +#endif /* __ASSEMBLY__ */ + #endif /* defined(_ARM_DELAY_H) */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index bbef15d0489..5c44dcb0987 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -186,17 +186,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs); -#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL) - -static inline int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, - size_t size, struct dma_attrs *attrs) -{ - struct dma_map_ops *ops = get_dma_ops(dev); - BUG_ON(!ops); - return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs); -} - static inline void *dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { @@ -213,20 +202,19 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } -static inline int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, size_t size) -{ - DEFINE_DMA_ATTRS(attrs); - dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs); - return dma_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, &attrs); -} +/* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. */ -extern void __init init_consistent_dma_size(unsigned long size); +static inline void init_consistent_dma_size(unsigned long size) { } /* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" @@ -280,6 +268,9 @@ extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int, enum dma_data_direction); +extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs); #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index e51b1e81df0..83eb2f77291 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -4,30 +4,6 @@ /* * This is the "bare minimum". AIO seems to require this. */ -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_L1_CACHE, - KM_L2_CACHE, - KM_KDB, - KM_TYPE_NR -}; - -#ifdef CONFIG_DEBUG_HIGHMEM -#define KM_NMI (-1) -#define KM_NMI_PTE (-1) -#define KM_IRQ_PTE (-1) -#endif +#define KM_TYPE_NR 16 #endif diff --git a/arch/arm/include/asm/locks.h b/arch/arm/include/asm/locks.h deleted file mode 100644 index ef4c897772d..00000000000 --- a/arch/arm/include/asm/locks.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * arch/arm/include/asm/locks.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Interrupt safe locking assembler. - */ -#ifndef __ASM_PROC_LOCKS_H -#define __ASM_PROC_LOCKS_H - -#if __LINUX_ARM_ARCH__ >= 6 - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -"1: ldrex lr, [%1]\n" \ -" sub lr, lr, %2\n" \ -" strex ip, lr, [%1]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" cmp lr, #0\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#else - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%1]\n" \ -" subs lr, lr, %2\n" \ -" str lr, [%1]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#endif - -#endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index fcb575747e5..5f6ddcc5645 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -16,7 +16,7 @@ #include <linux/compiler.h> #include <linux/const.h> #include <linux/types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #ifdef CONFIG_NEED_MACH_MEMORY_H #include <mach/memory.h> @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index 93226cf23ae..b1479fd04a9 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -7,121 +7,10 @@ */ #ifndef _ASM_MUTEX_H #define _ASM_MUTEX_H - -#if __LINUX_ARM_ARCH__ < 6 -/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ -# include <asm-generic/mutex-xchg.h> -#else - /* - * Attempting to lock a mutex on ARMv6+ can be done with a bastardized - * atomic decrement (it is not a reliable atomic decrement but it satisfies - * the defined semantics for our purpose, while being smaller and faster - * than a real atomic decrement or atomic swap. The idea is to attempt - * decrementing the lock value only once. If once decremented it isn't zero, - * or if its store-back fails due to a dispute on the exclusive store, we - * simply bail out immediately through the slow path where the lock will be - * reattempted until it succeeds. + * On pre-ARMv6 hardware this results in a swp-based implementation, + * which is the most efficient. For ARMv6+, we emit a pair of exclusive + * accesses instead. */ -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - fail_fn(count); -} - -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - __res = fail_fn(count); - return __res; -} - -/* - * Same trick is used for the unlock fast path. However the original value, - * rather than the result, is used to test for success in order to have - * better generated assembly. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "ldrex %0, [%3] \n\t" - "add %1, %0, #1 \n\t" - "strex %2, %1, [%3] " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __orig |= __ex_flag; - if (unlikely(__orig != 0)) - fail_fn(count); -} - -/* - * If the unlock was done on a contended lock, or if the unlock simply fails - * then the mutex remains locked. - */ -#define __mutex_slowpath_needs_to_unlock() 1 - -/* - * For __mutex_fastpath_trylock we use another construct which could be - * described as a "single value cmpxchg". - * - * This provides the needed trylock semantics like cmpxchg would, but it is - * lighter and less generic than a true cmpxchg implementation. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "1: ldrex %0, [%3] \n\t" - "subs %1, %0, #1 \n\t" - "strexeq %2, %1, [%3] \n\t" - "movlt %0, #0 \n\t" - "cmpeq %2, #0 \n\t" - "bgt 1b " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&count->counter) - : "cc", "memory" ); - - return __orig; -} - -#endif +#include <asm-generic/mutex-xchg.h> #endif diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 00cbe10a50e..e074948d814 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,21 +12,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* ARM perf PMU IDs for use by internal perf clients. */ -enum arm_perf_pmu_ids { - ARM_PERF_PMU_ID_XSCALE1 = 0, - ARM_PERF_PMU_ID_XSCALE2, - ARM_PERF_PMU_ID_V6, - ARM_PERF_PMU_ID_V6MP, - ARM_PERF_PMU_ID_CA8, - ARM_PERF_PMU_ID_CA9, - ARM_PERF_PMU_ID_CA5, - ARM_PERF_PMU_ID_CA15, - ARM_PERF_PMU_ID_CA7, - ARM_NUM_PMU_IDS, -}; - -extern enum arm_perf_pmu_ids -armpmu_get_pmu_id(void); +/* Nothing to see here... */ #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7..41dc31f834c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 90114faa9f3..4432305f4a2 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -103,10 +103,9 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; - enum arm_perf_pmu_ids id; enum arm_pmu_type type; cpumask_t active_irqs; - const char *name; + char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct hw_perf_event *evt, int idx); void (*disable)(struct hw_perf_event *evt, int idx); diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f75726343..05b8e82ec9f 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 23ebc0c82a3..24d284a1bfc 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -196,7 +196,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { phys_addr_t start; - unsigned long size; + phys_addr_t size; unsigned int highmem; }; @@ -217,7 +217,7 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size -extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern int arm_add_memory(phys_addr_t start, phys_addr_t size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 65fa3c88095..b4ca707d0a6 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -59,18 +59,13 @@ static inline void dsb_sev(void) } /* - * ARMv6 Spin-locking. + * ARMv6 ticket-based spin-locking. * - * We exclusively read the old value. If it is zero, we may have - * won the lock, so we try exclusively storing it. A memory barrier - * is required after we get a lock, and before we release it, because - * V6 CPUs are assumed to have weakly ordered memory. - * - * Unlocked value: 0 - * Locked value: 1 + * A memory barrier is required after we get a lock, and before we + * release it, because V6 CPUs are assumed to have weakly ordered + * memory. */ -#define arch_spin_is_locked(x) ((x)->lock != 0) #define arch_spin_unlock_wait(lock) \ do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) @@ -79,31 +74,39 @@ static inline void dsb_sev(void) static inline void arch_spin_lock(arch_spinlock_t *lock) { unsigned long tmp; + u32 newval; + arch_spinlock_t lockval; __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" - WFE("ne") -" strexeq %0, %2, [%1]\n" -" teqeq %0, #0\n" +"1: ldrex %0, [%3]\n" +" add %1, %0, %4\n" +" strex %2, %1, [%3]\n" +" teq %2, #0\n" " bne 1b" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) + : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) + : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); + while (lockval.tickets.next != lockval.tickets.owner) { + wfe(); + lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); + } + smp_mb(); } static inline int arch_spin_trylock(arch_spinlock_t *lock) { unsigned long tmp; + u32 slock; __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) +" ldrex %0, [%2]\n" +" subs %1, %0, %0, ror #16\n" +" addeq %0, %0, %3\n" +" strexeq %1, %0, [%2]" + : "=&r" (slock), "=&r" (tmp) + : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); if (tmp == 0) { @@ -116,17 +119,38 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { + unsigned long tmp; + u32 slock; + smp_mb(); __asm__ __volatile__( -" str %1, [%0]\n" - : - : "r" (&lock->lock), "r" (0) +" mov %1, #1\n" +"1: ldrex %0, [%2]\n" +" uadd16 %0, %0, %1\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (slock), "=&r" (tmp) + : "r" (&lock->slock) : "cc"); dsb_sev(); } +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); + return tickets.owner != tickets.next; +} + +static inline int arch_spin_is_contended(arch_spinlock_t *lock) +{ + struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); + return (tickets.next - tickets.owner) > 1; +} +#define arch_spin_is_contended arch_spin_is_contended + /* * RWLOCKS * @@ -158,7 +182,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw) unsigned long tmp; __asm__ __volatile__( -"1: ldrex %0, [%1]\n" +" ldrex %0, [%1]\n" " teq %0, #0\n" " strexeq %0, %2, [%1]" : "=&r" (tmp) @@ -244,7 +268,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw) unsigned long tmp, tmp2 = 1; __asm__ __volatile__( -"1: ldrex %0, [%2]\n" +" ldrex %0, [%2]\n" " adds %0, %0, #1\n" " strexpl %1, %0, [%2]\n" : "=&r" (tmp), "+r" (tmp2) diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h index d14d197ae04..b262d2f8b47 100644 --- a/arch/arm/include/asm/spinlock_types.h +++ b/arch/arm/include/asm/spinlock_types.h @@ -5,11 +5,24 @@ # error "please don't include this file directly" #endif +#define TICKET_SHIFT 16 + typedef struct { - volatile unsigned int lock; + union { + u32 slock; + struct __raw_tickets { +#ifdef __ARMEB__ + u16 next; + u16 owner; +#else + u16 owner; + u16 next; +#endif + } tickets; + }; } arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } } typedef struct { volatile unsigned int lock; diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 3be8de3adab..ce119442277 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,13 +12,15 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H +#include <asm/arch_timer.h> #include <mach/timex.h> typedef unsigned long cycles_t; -static inline cycles_t get_cycles (void) -{ - return 0; -} +#ifdef ARCH_HAS_READ_CURRENT_TIMER +#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) +#else +#define get_cycles() (0) +#endif #endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae..99a19512ee2 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 71f6536d17a..77bd79f2ffd 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -130,42 +141,57 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -189,6 +215,9 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type,addr,size) (__range_ok(addr,size) == 0) +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + /* * The "__xxx" versions of the user access functions do not verify the * address space - it must have been done previously with a separate @@ -216,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -297,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ @@ -398,9 +429,6 @@ extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned l #define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) #endif -extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __must_check __strnlen_user(const char __user *s, long n); - static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_READ, from, n)) @@ -427,24 +455,9 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo return n; } -static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __strncpy_from_user(dst, src, count); - return res; -} - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) - -static inline long __must_check strnlen_user(const char __user *s, long n) -{ - unsigned long res = 0; +extern long strncpy_from_user(char *dest, const char __user *src, long count); - if (__addr_ok(s)) - res = __strnlen_user(s, n); - - return res; -} +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); #endif /* _ASMARM_UACCESS_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 512cd147345..0cab47d4a83 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -446,7 +446,6 @@ #ifdef __KERNEL__ -#define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h new file mode 100644 index 00000000000..4d52f92967a --- /dev/null +++ b/arch/arm/include/asm/word-at-a-time.h @@ -0,0 +1,96 @@ +#ifndef __ASM_ARM_WORD_AT_A_TIME_H +#define __ASM_ARM_WORD_AT_A_TIME_H + +#ifndef __ARMEB__ + +/* + * Little-endian word-at-a-time zero byte handling. + * Heavily based on the x86 algorithm. + */ +#include <linux/kernel.h> + +struct word_at_a_time { + const unsigned long one_bits, high_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) } + +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, + const struct word_at_a_time *c) +{ + unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits; + *bits = mask; + return mask; +} + +#define prep_zero_mask(a, bits, c) (bits) + +static inline unsigned long create_zero_mask(unsigned long bits) +{ + bits = (bits - 1) & ~bits; + return bits >> 7; +} + +static inline unsigned long find_zero(unsigned long mask) +{ + unsigned long ret; + +#if __LINUX_ARM_ARCH__ >= 5 + /* We have clz available. */ + ret = fls(mask) >> 3; +#else + /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */ + ret = (0x0ff0001 + mask) >> 23; + /* Fix the 1 for 00 case */ + ret &= mask; +#endif + + return ret; +} + +#ifdef CONFIG_DCACHE_WORD_ACCESS + +#define zero_bytemask(mask) (mask) + +/* + * Load an unaligned word from kernel space. + * + * In the (very unlikely) case of the word being a page-crosser + * and the next page not being mapped, take the exception and + * return zeroes in the non-existing part. + */ +static inline unsigned long load_unaligned_zeropad(const void *addr) +{ + unsigned long ret, offset; + + /* Load word from unaligned pointer addr */ + asm( + "1: ldr %0, [%2]\n" + "2:\n" + " .pushsection .fixup,\"ax\"\n" + " .align 2\n" + "3: and %1, %2, #0x3\n" + " bic %2, %2, #0x3\n" + " ldr %0, [%2]\n" + " lsl %1, %1, #0x3\n" + " lsr %0, %0, %1\n" + " b 2b\n" + " .popsection\n" + " .pushsection __ex_table,\"a\"\n" + " .align 3\n" + " .long 1b, 3b\n" + " .popsection" + : "=&r" (ret), "=&r" (offset) + : "r" (addr), "Qo" (*(unsigned long *)addr)); + + return ret; +} + + +#endif /* DCACHE_WORD_ACCESS */ + +#else /* __ARMEB__ */ +#include <asm-generic/word-at-a-time.h> +#endif + +#endif /* __ASM_ARM_WORD_AT_A_TIME_H */ diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index dd58035621f..cf258807160 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -32,6 +32,8 @@ static int arch_timer_ppi2; static struct clock_event_device __percpu **arch_timer_evt; +extern void init_current_timer_delay(unsigned long freq); + /* * Architected system timer support. */ @@ -137,7 +139,7 @@ static int __cpuinit arch_timer_setup(struct clock_event_device *clk) /* Be safe... */ arch_timer_disable(); - clk->features = CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; clk->set_mode = arch_timer_set_mode; @@ -223,6 +225,14 @@ static cycle_t arch_counter_read(struct clocksource *cs) return arch_counter_get_cntpct(); } +int read_current_timer(unsigned long *timer_val) +{ + if (!arch_timer_rate) + return -ENXIO; + *timer_val = arch_counter_get_cntpct(); + return 0; +} + static struct clocksource clocksource_counter = { .name = "arch_sys_counter", .rating = 400, @@ -296,6 +306,7 @@ static int __init arch_timer_register(void) if (err) goto out_free_irq; + init_current_timer_delay(arch_timer_rate); return 0; out_free_irq: diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index b57c75e0b01..60d3b738d42 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -49,8 +49,7 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); /* platform dependent support */ -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__const_udelay); +EXPORT_SYMBOL(arm_delay_ops); /* networking */ EXPORT_SYMBOL(csum_partial); @@ -87,10 +86,6 @@ EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(__memzero); - /* user mem (segment) */ -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); - #ifdef CONFIG_MMU EXPORT_SYMBOL(copy_page); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 25552508c3f..2b2f25e7fef 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -253,7 +253,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void __init pci_fixup_it8152(struct pci_dev *dev) +static void __devinit pci_fixup_it8152(struct pci_dev *dev) { int i; /* fixup for ITE 8152 devices */ @@ -461,7 +461,7 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) if (!sys->bus) panic("PCI: unable to scan bus!"); - busnr = sys->bus->subordinate + 1; + busnr = sys->bus->busn_res.end + 1; list_add(&sys->node, head); } else { diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0d1851ca6eb..0f82098c9bf 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -244,6 +244,19 @@ svc_preempt: b 1b #endif +__und_fault: + @ Correct the PC such that it is pointing at the instruction + @ which caused the fault. If the faulting instruction was ARM + @ the PC will be pointing at the next instruction, and have to + @ subtract 4. Otherwise, it is Thumb, and the PC will be + @ pointing at the second half of the Thumb instruction. We + @ have to subtract 2. + ldr r2, [r0, #S_PC] + sub r2, r2, r1 + str r2, [r0, #S_PC] + b do_undefinstr +ENDPROC(__und_fault) + .align 5 __und_svc: #ifdef CONFIG_KPROBES @@ -261,25 +274,32 @@ __und_svc: @ @ r0 - instruction @ -#ifndef CONFIG_THUMB2_KERNEL +#ifndef CONFIG_THUMB2_KERNEL ldr r0, [r4, #-4] #else + mov r1, #2 ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 - ldrhhs r9, [r4] @ bottom 16 bits - orrhs r0, r9, r0, lsl #16 + blo __und_svc_fault + ldrh r9, [r4] @ bottom 16 bits + add r4, r4, #2 + str r4, [sp, #S_PC] + orr r0, r9, r0, lsl #16 #endif - adr r9, BSYM(1f) + adr r9, BSYM(__und_svc_finish) mov r2, r4 bl call_fpe + mov r1, #4 @ PC correction to apply +__und_svc_fault: mov r0, sp @ struct pt_regs *regs - bl do_undefinstr + bl __und_fault @ @ IRQs off again before pulling preserved data off the stack @ -1: disable_irq_notrace +__und_svc_finish: + disable_irq_notrace @ @ restore SPSR and restart the instruction @@ -423,25 +443,33 @@ __und_usr: mov r2, r4 mov r3, r5 + @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the + @ faulting instruction depending on Thumb mode. + @ r3 = regs->ARM_cpsr @ - @ fall through to the emulation code, which returns using r9 if - @ it has emulated the instruction, or the more conventional lr - @ if we are to treat this as a real undefined instruction - @ - @ r0 - instruction + @ The emulation code returns using r9 if it has emulated the + @ instruction, or the more conventional lr if we are to treat + @ this as a real undefined instruction @ adr r9, BSYM(ret_from_exception) - adr lr, BSYM(__und_usr_unknown) + tst r3, #PSR_T_BIT @ Thumb mode? - itet eq @ explicit IT needed for the 1f label - subeq r4, r2, #4 @ ARM instr at LR - 4 - subne r4, r2, #2 @ Thumb instr at LR - 2 -1: ldreqt r0, [r4] + bne __und_usr_thumb + sub r4, r2, #4 @ ARM instr at LR - 4 +1: ldrt r0, [r4] #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r0, r0 @ little endian instruction + rev r0, r0 @ little endian instruction #endif - beq call_fpe + @ r0 = 32-bit ARM instruction which caused the exception + @ r2 = PC value for the following instruction (:= regs->ARM_pc) + @ r4 = PC value for the faulting instruction + @ lr = 32-bit undefined instruction function + adr lr, BSYM(__und_usr_fault_32) + b call_fpe + +__und_usr_thumb: @ Thumb instruction + sub r4, r2, #2 @ First half of thumb instr at LR - 2 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 /* * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms @@ -455,7 +483,7 @@ __und_usr: ldr r5, .LCcpu_architecture ldr r5, [r5] cmp r5, #CPU_ARCH_ARMv7 - blo __und_usr_unknown + blo __und_usr_fault_16 @ 16bit undefined instruction /* * The following code won't get run unless the running CPU really is v7, so * coding round the lack of ldrht on older arches is pointless. Temporarily @@ -463,15 +491,18 @@ __und_usr: */ .arch armv6t2 #endif -2: - ARM( ldrht r5, [r4], #2 ) - THUMB( ldrht r5, [r4] ) - THUMB( add r4, r4, #2 ) +2: ldrht r5, [r4] cmp r5, #0xe800 @ 32bit instruction if xx != 0 - blo __und_usr_unknown -3: ldrht r0, [r4] + blo __und_usr_fault_16 @ 16bit undefined instruction +3: ldrht r0, [r2] add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 + str r2, [sp, #S_PC] @ it's a 2x16bit instr, update orr r0, r0, r5, lsl #16 + adr lr, BSYM(__und_usr_fault_32) + @ r0 = the two 16-bit Thumb instructions which caused the exception + @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc) + @ r4 = PC value for the first 16-bit Thumb instruction + @ lr = 32bit undefined instruction function #if __LINUX_ARM_ARCH__ < 7 /* If the target arch was overridden, change it back: */ @@ -482,17 +513,13 @@ __und_usr: #endif #endif /* __LINUX_ARM_ARCH__ < 7 */ #else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */ - b __und_usr_unknown + b __und_usr_fault_16 #endif - UNWIND(.fnend ) + UNWIND(.fnend) ENDPROC(__und_usr) - @ - @ fallthrough to call_fpe - @ - /* - * The out of line fixup for the ldrt above. + * The out of line fixup for the ldrt instructions above. */ .pushsection .fixup, "ax" .align 2 @@ -524,11 +551,12 @@ ENDPROC(__und_usr) * NEON handler code. * * Emulators may wish to make use of the following registers: - * r0 = instruction opcode. - * r2 = PC+4 + * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) + * r2 = PC value to resume execution after successful emulation * r9 = normal "successful" return address - * r10 = this threads thread_info structure. + * r10 = this threads thread_info structure * lr = unrecognised instruction return address + * IRQs disabled, FIQs enabled. */ @ @ Fall-through from Thumb-2 __und_usr @@ -659,12 +687,17 @@ ENTRY(no_fp) mov pc, lr ENDPROC(no_fp) -__und_usr_unknown: - enable_irq +__und_usr_fault_32: + mov r1, #4 + b 1f +__und_usr_fault_16: + mov r1, #2 +1: enable_irq mov r0, sp adr lr, BSYM(ret_from_exception) - b do_undefinstr -ENDPROC(__und_usr_unknown) + b __und_fault +ENDPROC(__und_usr_fault_32) +ENDPROC(__und_usr_fault_16) .align 5 __pabt_usr: diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 4afed88d250..978eac57e04 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -51,23 +51,15 @@ ret_fast_syscall: fast_work_pending: str r0, [sp, #S_R0+S_OFF]! @ returned r0 work_pending: - tst r1, #_TIF_NEED_RESCHED - bne work_resched - /* - * TIF_SIGPENDING or TIF_NOTIFY_RESUME must've been set if we got here - */ - ldr r2, [sp, #S_PSR] mov r0, sp @ 'regs' - tst r2, #15 @ are we returning to user mode? - bne no_work_pending @ no? just leave, then... mov r2, why @ 'syscall' - tst r1, #_TIF_SIGPENDING @ delivering a signal? - movne why, #0 @ prevent further restarts - bl do_notify_resume - b ret_slow_syscall @ Check work again + bl do_work_pending + cmp r0, #0 + beq no_work_pending + movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE) + ldmia sp, {r0 - r6} @ have to reload r0 - r6 + b local_restart @ ... and off we go -work_resched: - bl schedule /* * "slow" syscall return path. "why" tells us if this was a real syscall. */ @@ -95,13 +87,7 @@ ENDPROC(ret_to_user) ENTRY(ret_from_fork) bl schedule_tail get_thread_info tsk - ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing mov why, #1 - tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls? - beq ret_slow_syscall - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - bl syscall_trace b ret_slow_syscall ENDPROC(ret_from_fork) @@ -415,6 +401,7 @@ ENTRY(vector_swi) eor scno, scno, #__NR_SYSCALL_BASE @ check OS number #endif +local_restart: ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args @@ -448,25 +435,24 @@ ENDPROC(vector_swi) * context switches, and waiting for our parent to respond. */ __sys_trace: - mov r2, scno - add r1, sp, #S_OFF - mov r0, #0 @ trace entry [IP = 0] - bl syscall_trace + mov r1, scno + add r0, sp, #S_OFF + bl syscall_trace_enter adr lr, BSYM(__sys_trace_return) @ return address mov scno, r0 @ syscall number (possibly new) add r1, sp, #S_R0 + S_OFF @ pointer to regs cmp scno, #NR_syscalls @ check upper syscall limit - ldmccia r1, {r0 - r3} @ have to reload r0 - r3 + ldmccia r1, {r0 - r6} @ have to reload r0 - r6 + stmccia sp, {r4, r5} @ and update the stack args ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine b 2b __sys_trace_return: str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 - mov r2, scno - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - bl syscall_trace + mov r1, scno + mov r0, sp + bl syscall_trace_exit b ret_slow_syscall .align 5 diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index df0bf0c8cb7..34e56647dce 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -179,19 +179,20 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, old = *parent; *parent = return_hooker; - err = ftrace_push_return_trace(old, self_addr, &trace.depth, - frame_pointer); - if (err == -EBUSY) { - *parent = old; - return; - } - trace.func = self_addr; + trace.depth = current->curr_ret_stack + 1; /* Only trace if the calling function expects to */ if (!ftrace_graph_entry(&trace)) { - current->curr_ret_stack--; *parent = old; + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer); + if (err == -EBUSY) { + *parent = old; + return; } } diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 835898e7d70..3db960e20cb 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -55,14 +55,6 @@ add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm -#ifdef CONFIG_XIP_KERNEL -#define KERNEL_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) -#define KERNEL_END _edata_loc -#else -#define KERNEL_START KERNEL_RAM_VADDR -#define KERNEL_END _end -#endif - /* * Kernel startup entry point. * --------------------------- @@ -218,51 +210,46 @@ __create_page_tables: blo 1b /* - * Now setup the pagetables for our kernel direct - * mapped region. + * Map our RAM from the start to the end of the kernel .bss section. */ - mov r3, pc - mov r3, r3, lsr #SECTION_SHIFT - orr r3, r7, r3, lsl #SECTION_SHIFT - add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) - str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! - ldr r6, =(KERNEL_END - 1) - add r0, r0, #1 << PMD_ORDER + add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER) + ldr r6, =(_end - 1) + orr r3, r8, r7 add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) -1: cmp r0, r6 +1: str r3, [r0], #1 << PMD_ORDER add r3, r3, #1 << SECTION_SHIFT - strls r3, [r0], #1 << PMD_ORDER + cmp r0, r6 bls 1b #ifdef CONFIG_XIP_KERNEL /* - * Map some ram to cover our .data and .bss areas. + * Map the kernel image separately as it is not located in RAM. */ - add r3, r8, #TEXT_OFFSET - orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! - ldr r6, =(_end - 1) - add r0, r0, #4 +#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + mov r3, pc + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! + ldr r6, =(_edata_loc - 1) + add r0, r0, #1 << PMD_ORDER add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #endif /* - * Then map boot params address in r2 or the first 1MB (2MB with LPAE) - * of ram if boot params address is not specified. + * Then map boot params address in r2 if specified. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT - moveq r0, r8 - sub r3, r0, r8 - add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) - orr r6, r7, r0 - str r6, [r3] + subne r3, r0, r8 + addne r3, r3, #PAGE_OFFSET + addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) + orrne r6, r7, r0 + strne r6, [r3] #ifdef CONFIG_DEBUG_LL #if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd9410..281bf330124 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; @@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index a02eada3aa5..ab243b87118 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -47,17 +47,14 @@ static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); /* Set at runtime when we know what CPU type we are. */ static struct arm_pmu *cpu_pmu; -enum arm_perf_pmu_ids -armpmu_get_pmu_id(void) +const char *perf_pmu_name(void) { - int id = -ENODEV; - - if (cpu_pmu != NULL) - id = cpu_pmu->id; + if (!cpu_pmu) + return NULL; - return id; + return cpu_pmu->pmu.name; } -EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); +EXPORT_SYMBOL_GPL(perf_pmu_name); int perf_num_counters(void) { @@ -760,7 +757,7 @@ init_hw_perf_events(void) cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); register_cpu_notifier(&pmu_cpu_notifier); - armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); + armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index ab627a740fa..c90fcb2b696 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -650,7 +650,6 @@ static int armv6_map_event(struct perf_event *event) } static struct arm_pmu armv6pmu = { - .id = ARM_PERF_PMU_ID_V6, .name = "v6", .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, @@ -685,7 +684,6 @@ static int armv6mpcore_map_event(struct perf_event *event) } static struct arm_pmu armv6mpcore_pmu = { - .id = ARM_PERF_PMU_ID_V6MP, .name = "v6mpcore", .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index d3c53606816..f04070bd218 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1258,7 +1258,6 @@ static u32 __init armv7_read_num_pmnc_events(void) static struct arm_pmu *__init armv7_a8_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA8; armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.map_event = armv7_a8_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1267,7 +1266,6 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void) static struct arm_pmu *__init armv7_a9_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA9; armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.map_event = armv7_a9_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1276,7 +1274,6 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void) static struct arm_pmu *__init armv7_a5_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA5; armv7pmu.name = "ARMv7 Cortex-A5"; armv7pmu.map_event = armv7_a5_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1285,7 +1282,6 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void) static struct arm_pmu *__init armv7_a15_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA15; armv7pmu.name = "ARMv7 Cortex-A15"; armv7pmu.map_event = armv7_a15_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); @@ -1295,7 +1291,6 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) static struct arm_pmu *__init armv7_a7_pmu_init(void) { - armv7pmu.id = ARM_PERF_PMU_ID_CA7; armv7pmu.name = "ARMv7 Cortex-A7"; armv7pmu.map_event = armv7_a7_map_event; armv7pmu.num_events = armv7_read_num_pmnc_events(); diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index e34e7254e65..f759fe0bab6 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -435,7 +435,6 @@ static int xscale_map_event(struct perf_event *event) } static struct arm_pmu xscale1pmu = { - .id = ARM_PERF_PMU_ID_XSCALE1, .name = "xscale1", .handle_irq = xscale1pmu_handle_irq, .enable = xscale1pmu_enable_event, @@ -803,7 +802,6 @@ xscale2pmu_write_counter(int counter, u32 val) } static struct arm_pmu xscale2pmu = { - .id = ARM_PERF_PMU_ID_XSCALE2, .name = "xscale2", .handle_irq = xscale2pmu_handle_irq, .enable = xscale2pmu_enable_event, diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 19c95ea65b2..693b744fd57 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -247,6 +247,7 @@ void machine_shutdown(void) void machine_halt(void) { machine_shutdown(); + local_irq_disable(); while (1); } @@ -268,6 +269,7 @@ void machine_restart(char *cmd) /* Whoops - the platform was unable to reboot. Tell the user! */ printk("Reboot failed -- System halted\n"); + local_irq_disable(); while (1); } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 14e38261cd3..3e0fc5f7ed4 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,6 +25,7 @@ #include <linux/regset.h> #include <linux/audit.h> #include <linux/tracehook.h> +#include <linux/unistd.h> #include <asm/pgtable.h> #include <asm/traps.h> @@ -907,16 +908,16 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) +enum ptrace_syscall_dir { + PTRACE_SYSCALL_ENTER = 0, + PTRACE_SYSCALL_EXIT, +}; + +static int ptrace_syscall_trace(struct pt_regs *regs, int scno, + enum ptrace_syscall_dir dir) { unsigned long ip; - if (why) - audit_syscall_exit(regs); - else - audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, - regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; @@ -927,14 +928,28 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) * IP = 0 -> entry, =1 -> exit */ ip = regs->ARM_ip; - regs->ARM_ip = why; + regs->ARM_ip = dir; - if (why) + if (dir == PTRACE_SYSCALL_EXIT) tracehook_report_syscall_exit(regs, 0); else if (tracehook_report_syscall_entry(regs)) current_thread_info()->syscall = -1; regs->ARM_ip = ip; - return current_thread_info()->syscall; } + +asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) +{ + int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, + regs->ARM_r2, regs->ARM_r3); + return ret; +} + +asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) +{ + int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + audit_syscall_exit(regs); + return ret; +} diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc0..f4515393248 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e15d83bb4ea..a81dcecc734 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -508,7 +508,7 @@ void __init dump_machine_table(void) /* can't use cpu_relax() here as it may require MMU setup */; } -int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, phys_addr_t size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -538,7 +538,7 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) } #endif - bank->size = size & PAGE_MASK; + bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1); /* * Check whether this memory region has non-zero size or @@ -558,7 +558,7 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) static int __init early_mem(char *p) { static int usermem __initdata = 0; - unsigned long size; + phys_addr_t size; phys_addr_t start; char *endp; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 536c5d6b340..f27789e4e38 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,7 +27,6 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) -#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -48,18 +47,6 @@ const unsigned long sigreturn_codes[7] = { }; /* - * Either we support OABI only, or we have EABI with the OABI - * compat layer enabled. In the later case we don't know if - * user space is EABI or not, and if not we must not clobber r7. - * Always using the OABI syscall solves that issue and works for - * all those cases. - */ -const unsigned long syscall_restart_code[2] = { - SWI_SYS_RESTART, /* swi __NR_restart_syscall */ - 0xe49df004, /* ldr pc, [sp], #4 */ -}; - -/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -582,12 +569,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ -static void do_signal(struct pt_regs *regs, int syscall) +static int do_signal(struct pt_regs *regs, int syscall) { unsigned int retval = 0, continue_addr = 0, restart_addr = 0; struct k_sigaction ka; siginfo_t info; int signr; + int restart = 0; /* * If we were from a system call, check for system call restarting... @@ -602,15 +590,15 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger will see the already changed PSW. */ switch (retval) { + case -ERESTART_RESTARTBLOCK: + restart -= 2; case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: + restart++; regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; - case -ERESTART_RESTARTBLOCK: - regs->ARM_r0 = -EINTR; - break; } } @@ -619,14 +607,17 @@ static void do_signal(struct pt_regs *regs, int syscall) * point the debugger may change all our registers ... */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); + /* + * Depending on the signal settings we may need to revert the + * decision to restart the system call. But skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->ARM_pc != restart_addr) + restart = 0; if (signr > 0) { - /* - * Depending on the signal settings we may need to revert the - * decision to restart the system call. But skip this if a - * debugger has chosen to restart at a different PC. - */ - if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND + if (unlikely(restart)) { + if (retval == -ERESTARTNOHAND || + retval == -ERESTART_RESTARTBLOCK || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; @@ -635,52 +626,43 @@ static void do_signal(struct pt_regs *regs, int syscall) } handle_signal(signr, &ka, &info, regs); - return; - } - - if (syscall) { - /* - * Handle restarting a different system call. As above, - * if a debugger has chosen to restart at a different PC, - * ignore the restart. - */ - if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == continue_addr) { - if (thumb_mode(regs)) { - regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; - regs->ARM_pc -= 2; - } else { -#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) - regs->ARM_r7 = __NR_restart_syscall; - regs->ARM_pc -= 4; -#else - u32 __user *usp; - - regs->ARM_sp -= 4; - usp = (u32 __user *)regs->ARM_sp; - - if (put_user(regs->ARM_pc, usp) == 0) { - regs->ARM_pc = KERN_RESTART_CODE; - } else { - regs->ARM_sp += 4; - force_sigsegv(0, current); - } -#endif - } - } + return 0; } restore_saved_sigmask(); + if (unlikely(restart)) + regs->ARM_pc = continue_addr; + return restart; } -asmlinkage void -do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall) +asmlinkage int +do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) { - if (thread_flags & _TIF_SIGPENDING) - do_signal(regs, syscall); - - if (thread_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } + do { + if (likely(thread_flags & _TIF_NEED_RESCHED)) { + schedule(); + } else { + if (unlikely(!user_mode(regs))) + return 0; + local_irq_enable(); + if (thread_flags & _TIF_SIGPENDING) { + int restart = do_signal(regs, syscall); + if (unlikely(restart)) { + /* + * Restart without handlers. + * Deal with it without leaving + * the kernel space. + */ + return restart; + } + syscall = 0; + } else { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + } + local_irq_disable(); + thread_flags = current_thread_info()->flags; + } while (thread_flags & _TIF_WORK_MASK); + return 0; } diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 6fcfe8398aa..5ff067b7c75 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,7 +8,5 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) -#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; -extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 2c7217d971d..ebd8ad274d7 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -179,7 +179,7 @@ void __ref cpu_die(void) mb(); /* Tell __cpu_die() that this CPU is now safe to dispose of */ - complete(&cpu_died); + RCU_NONIDLE(complete(&cpu_died)); /* * actual CPU shutdown procedure is at least platform (if not @@ -563,7 +563,8 @@ void smp_send_stop(void) cpumask_copy(&mask, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &mask); - smp_cross_call(&mask, IPI_CPU_STOP); + if (!cpumask_empty(&mask)) + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 8200deaa14f..26c12c6440f 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -17,11 +17,190 @@ #include <linux/percpu.h> #include <linux/node.h> #include <linux/nodemask.h> +#include <linux/of.h> #include <linux/sched.h> +#include <linux/slab.h> #include <asm/cputype.h> #include <asm/topology.h> +/* + * cpu power scale management + */ + +/* + * cpu power table + * This per cpu data structure describes the relative capacity of each core. + * On a heteregenous system, cores don't have the same computation capacity + * and we reflect that difference in the cpu_power field so the scheduler can + * take this difference into account during load balance. A per cpu structure + * is preferred because each CPU updates its own cpu_power field during the + * load balance except for idle cores. One idle core is selected to run the + * rebalance_domains for all idle cores and the cpu_power can be updated + * during this sequence. + */ +static DEFINE_PER_CPU(unsigned long, cpu_scale); + +unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu) +{ + return per_cpu(cpu_scale, cpu); +} + +static void set_power_scale(unsigned int cpu, unsigned long power) +{ + per_cpu(cpu_scale, cpu) = power; +} + +#ifdef CONFIG_OF +struct cpu_efficiency { + const char *compatible; + unsigned long efficiency; +}; + +/* + * Table of relative efficiency of each processors + * The efficiency value must fit in 20bit and the final + * cpu_scale value must be in the range + * 0 < cpu_scale < 3*SCHED_POWER_SCALE/2 + * in order to return at most 1 when DIV_ROUND_CLOSEST + * is used to compute the capacity of a CPU. + * Processors that are not defined in the table, + * use the default SCHED_POWER_SCALE value for cpu_scale. + */ +struct cpu_efficiency table_efficiency[] = { + {"arm,cortex-a15", 3891}, + {"arm,cortex-a7", 2048}, + {NULL, }, +}; + +struct cpu_capacity { + unsigned long hwid; + unsigned long capacity; +}; + +struct cpu_capacity *cpu_capacity; + +unsigned long middle_capacity = 1; + +/* + * Iterate all CPUs' descriptor in DT and compute the efficiency + * (as per table_efficiency). Also calculate a middle efficiency + * as close as possible to (max{eff_i} - min{eff_i}) / 2 + * This is later used to scale the cpu_power field such that an + * 'average' CPU is of middle power. Also see the comments near + * table_efficiency[] and update_cpu_power(). + */ +static void __init parse_dt_topology(void) +{ + struct cpu_efficiency *cpu_eff; + struct device_node *cn = NULL; + unsigned long min_capacity = (unsigned long)(-1); + unsigned long max_capacity = 0; + unsigned long capacity = 0; + int alloc_size, cpu = 0; + + alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); + cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT); + + while ((cn = of_find_node_by_type(cn, "cpu"))) { + const u32 *rate, *reg; + int len; + + if (cpu >= num_possible_cpus()) + break; + + for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++) + if (of_device_is_compatible(cn, cpu_eff->compatible)) + break; + + if (cpu_eff->compatible == NULL) + continue; + + rate = of_get_property(cn, "clock-frequency", &len); + if (!rate || len != 4) { + pr_err("%s missing clock-frequency property\n", + cn->full_name); + continue; + } + + reg = of_get_property(cn, "reg", &len); + if (!reg || len != 4) { + pr_err("%s missing reg property\n", cn->full_name); + continue; + } + + capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; + + /* Save min capacity of the system */ + if (capacity < min_capacity) + min_capacity = capacity; + + /* Save max capacity of the system */ + if (capacity > max_capacity) + max_capacity = capacity; + + cpu_capacity[cpu].capacity = capacity; + cpu_capacity[cpu++].hwid = be32_to_cpup(reg); + } + + if (cpu < num_possible_cpus()) + cpu_capacity[cpu].hwid = (unsigned long)(-1); + + /* If min and max capacities are equals, we bypass the update of the + * cpu_scale because all CPUs have the same capacity. Otherwise, we + * compute a middle_capacity factor that will ensure that the capacity + * of an 'average' CPU of the system will be as close as possible to + * SCHED_POWER_SCALE, which is the default value, but with the + * constraint explained near table_efficiency[]. + */ + if (min_capacity == max_capacity) + cpu_capacity[0].hwid = (unsigned long)(-1); + else if (4*max_capacity < (3*(max_capacity + min_capacity))) + middle_capacity = (min_capacity + max_capacity) + >> (SCHED_POWER_SHIFT+1); + else + middle_capacity = ((max_capacity / 3) + >> (SCHED_POWER_SHIFT-1)) + 1; + +} + +/* + * Look for a customed capacity of a CPU in the cpu_capacity table during the + * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the + * function returns directly for SMP system. + */ +void update_cpu_power(unsigned int cpu, unsigned long hwid) +{ + unsigned int idx = 0; + + /* look for the cpu's hwid in the cpu capacity table */ + for (idx = 0; idx < num_possible_cpus(); idx++) { + if (cpu_capacity[idx].hwid == hwid) + break; + + if (cpu_capacity[idx].hwid == -1) + return; + } + + if (idx == num_possible_cpus()) + return; + + set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity); + + printk(KERN_INFO "CPU%u: update cpu_power %lu\n", + cpu, arch_scale_freq_power(NULL, cpu)); +} + +#else +static inline void parse_dt_topology(void) {} +static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} +#endif + + +/* + * cpu topology management + */ + #define MPIDR_SMP_BITMASK (0x3 << 30) #define MPIDR_SMP_VALUE (0x2 << 30) @@ -31,6 +210,7 @@ * These masks reflect the current use of the affinity levels. * The affinity level can be up to 16 bits according to ARM ARM */ +#define MPIDR_HWID_BITMASK 0xFFFFFF #define MPIDR_LEVEL0_MASK 0x3 #define MPIDR_LEVEL0_SHIFT 0 @@ -41,6 +221,9 @@ #define MPIDR_LEVEL2_MASK 0xFF #define MPIDR_LEVEL2_SHIFT 16 +/* + * cpu topology table + */ struct cputopo_arm cpu_topology[NR_CPUS]; const struct cpumask *cpu_coregroup_mask(int cpu) @@ -48,6 +231,32 @@ const struct cpumask *cpu_coregroup_mask(int cpu) return &cpu_topology[cpu].core_sibling; } +void update_siblings_masks(unsigned int cpuid) +{ + struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; + int cpu; + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id != cpu_topo->socket_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id != cpu_topo->core_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling); + } + smp_wmb(); +} + /* * store_cpu_topology is called at boot when only one cpu is running * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, @@ -57,7 +266,6 @@ void store_cpu_topology(unsigned int cpuid) { struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; unsigned int mpidr; - unsigned int cpu; /* If the cpu topology has been already set, just return */ if (cpuid_topo->core_id != -1) @@ -99,26 +307,9 @@ void store_cpu_topology(unsigned int cpuid) cpuid_topo->socket_id = -1; } - /* update core and thread sibling masks */ - for_each_possible_cpu(cpu) { - struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; - - if (cpuid_topo->socket_id == cpu_topo->socket_id) { - cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); - if (cpu != cpuid) - cpumask_set_cpu(cpu, - &cpuid_topo->core_sibling); - - if (cpuid_topo->core_id == cpu_topo->core_id) { - cpumask_set_cpu(cpuid, - &cpu_topo->thread_sibling); - if (cpu != cpuid) - cpumask_set_cpu(cpu, - &cpuid_topo->thread_sibling); - } - } - } - smp_wmb(); + update_siblings_masks(cpuid); + + update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK); printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, @@ -130,11 +321,11 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; - /* init core mask */ + /* init core mask and power*/ for_each_possible_cpu(cpu) { struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); @@ -143,6 +334,10 @@ void init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); + + set_power_scale(cpu, SCHED_POWER_SCALE); } smp_wmb(); + + parse_dt_topology(); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 3647170e9a1..b0179b89a04 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -233,9 +233,9 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) #define S_ISA " ARM" #endif -static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs) +static int __die(const char *str, int err, struct pt_regs *regs) { - struct task_struct *tsk = thread->task; + struct task_struct *tsk = current; static int die_counter; int ret; @@ -245,12 +245,12 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt /* trap and error numbers are mostly meaningless on ARM */ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV); if (ret == NOTIFY_STOP) - return ret; + return 1; print_modules(); __show_regs(regs); printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", - TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1); + TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), end_of_stack(tsk)); if (!user_mode(regs) || in_interrupt()) { dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp, @@ -259,45 +259,77 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt dump_instr(KERN_EMERG, regs); } - return ret; + return 0; } -static DEFINE_RAW_SPINLOCK(die_lock); +static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int die_owner = -1; +static unsigned int die_nest_count; -/* - * This function is protected against re-entrancy. - */ -void die(const char *str, struct pt_regs *regs, int err) +static unsigned long oops_begin(void) { - struct thread_info *thread = current_thread_info(); - int ret; - enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; + int cpu; + unsigned long flags; oops_enter(); - raw_spin_lock_irq(&die_lock); + /* racy, but better than risking deadlock. */ + raw_local_irq_save(flags); + cpu = smp_processor_id(); + if (!arch_spin_trylock(&die_lock)) { + if (cpu == die_owner) + /* nested oops. should stop eventually */; + else + arch_spin_lock(&die_lock); + } + die_nest_count++; + die_owner = cpu; console_verbose(); bust_spinlocks(1); - if (!user_mode(regs)) - bug_type = report_bug(regs->ARM_pc, regs); - if (bug_type != BUG_TRAP_TYPE_NONE) - str = "Oops - BUG"; - ret = __die(str, err, thread, regs); + return flags; +} - if (regs && kexec_should_crash(thread->task)) +static void oops_end(unsigned long flags, struct pt_regs *regs, int signr) +{ + if (regs && kexec_should_crash(current)) crash_kexec(regs); bust_spinlocks(0); + die_owner = -1; add_taint(TAINT_DIE); - raw_spin_unlock_irq(&die_lock); + die_nest_count--; + if (!die_nest_count) + /* Nest count reaches zero, release the lock. */ + arch_spin_unlock(&die_lock); + raw_local_irq_restore(flags); oops_exit(); if (in_interrupt()) panic("Fatal exception in interrupt"); if (panic_on_oops) panic("Fatal exception"); - if (ret != NOTIFY_STOP) - do_exit(SIGSEGV); + if (signr) + do_exit(signr); +} + +/* + * This function is protected against re-entrancy. + */ +void die(const char *str, struct pt_regs *regs, int err) +{ + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; + unsigned long flags = oops_begin(); + int sig = SIGSEGV; + + if (!user_mode(regs)) + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; + + if (__die(str, err, regs)) + sig = 0; + + oops_end(flags, regs, sig); } void arm_notify_die(const char *str, struct pt_regs *regs, @@ -370,18 +402,10 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr) asmlinkage void __exception do_undefinstr(struct pt_regs *regs) { - unsigned int correction = thumb_mode(regs) ? 2 : 4; unsigned int instr; siginfo_t info; void __user *pc; - /* - * According to the ARM ARM, PC is 2 or 4 bytes ahead, - * depending whether we're in Thumb mode or not. - * Correct this offset. - */ - regs->ARM_pc -= correction; - pc = (void __user *)instruction_pointer(regs); if (processor_mode(regs) == SVC_MODE) { @@ -396,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", @@ -820,8 +847,6 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); - memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), - syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 992769ae259..af72969820b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -6,9 +6,8 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ - delay.o findbit.o memchr.o memcpy.o \ + delay.o delay-loop.o findbit.o memchr.o memcpy.o \ memmove.o memset.o memzero.o setbit.o \ - strncpy_from_user.o strnlen_user.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ @@ -17,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay-loop.S index 3c9a05c8d20..36b668d8e12 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay-loop.S @@ -9,11 +9,11 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/param.h> +#include <asm/delay.h> .text .LC0: .word loops_per_jiffy -.LC1: .word (2199023*HZ)>>11 +.LC1: .word UDELAY_MULT /* * r0 <= 2000 @@ -21,10 +21,10 @@ * HZ <= 1000 */ -ENTRY(__udelay) +ENTRY(__loop_udelay) ldr r2, .LC1 mul r0, r2, r0 -ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 +ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 mov r1, #-1 ldr r2, .LC0 ldr r2, [r2] @ max = 0x01ffffff @@ -39,12 +39,10 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 /* * loops = r0 * HZ * loops_per_jiffy / 1000000 - * - * Oh, if only we had a cycle counter... */ @ Delay routine -ENTRY(__delay) +ENTRY(__loop_delay) subs r0, r0, #1 #if 0 movls pc, lr @@ -62,8 +60,8 @@ ENTRY(__delay) movls pc, lr subs r0, r0, #1 #endif - bhi __delay + bhi __loop_delay mov pc, lr -ENDPROC(__udelay) -ENDPROC(__const_udelay) -ENDPROC(__delay) +ENDPROC(__loop_udelay) +ENDPROC(__loop_const_udelay) +ENDPROC(__loop_delay) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c new file mode 100644 index 00000000000..395d5fbb8fa --- /dev/null +++ b/arch/arm/lib/delay.c @@ -0,0 +1,72 @@ +/* + * Delay loops based on the OpenRISC implementation. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/timex.h> + +/* + * Default to the loop-based delay implementation. + */ +struct arm_delay_ops arm_delay_ops = { + .delay = __loop_delay, + .const_udelay = __loop_const_udelay, + .udelay = __loop_udelay, +}; + +#ifdef ARCH_HAS_READ_CURRENT_TIMER +static void __timer_delay(unsigned long cycles) +{ + cycles_t start = get_cycles(); + + while ((get_cycles() - start) < cycles) + cpu_relax(); +} + +static void __timer_const_udelay(unsigned long xloops) +{ + unsigned long long loops = xloops; + loops *= loops_per_jiffy; + __timer_delay(loops >> UDELAY_SHIFT); +} + +static void __timer_udelay(unsigned long usecs) +{ + __timer_const_udelay(usecs * UDELAY_MULT); +} + +void __init init_current_timer_delay(unsigned long freq) +{ + pr_info("Switching to timer-based delay loop\n"); + lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; + arm_delay_ops.delay = __timer_delay; + arm_delay_ops.const_udelay = __timer_const_udelay; + arm_delay_ops.udelay = __timer_udelay; +} + +unsigned long __cpuinit calibrate_delay_is_known(void) +{ + return lpj_fine; +} +#endif diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e3..9b06bb41fca 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see <asm/uaccess.h> @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index 1b197ea7aab..69719bad674 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -11,13 +11,14 @@ * */ #include <linux/linkage.h> +#include <linux/kern_levels.h> #include <asm/assembler.h> .text .align .Liosl_warning: - .ascii "<4>insl/outsl not implemented, called from %08lX\0" + .ascii KERN_WARNING "insl/outsl not implemented, called from %08lX\0" .align /* diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 00000000000..88487c8c4f2 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 00000000000..49b800419e3 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c58..3d73dcb959b 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S deleted file mode 100644 index f202d7bd164..00000000000 --- a/arch/arm/lib/strncpy_from_user.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/lib/strncpy_from_user.S - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* - * Copy a string from user space to kernel space. - * r0 = dst, r1 = src, r2 = byte length - * returns the number of characters copied (strlen of copied string), - * -EFAULT on exception, or "len" if we fill the whole buffer - */ -ENTRY(__strncpy_from_user) - mov ip, r1 -1: subs r2, r2, #1 - ldrusr r3, r1, 1, pl - bmi 2f - strb r3, [r0], #1 - teq r3, #0 - bne 1b - sub r1, r1, #1 @ take NUL character out of count -2: sub r0, r1, ip - mov pc, lr -ENDPROC(__strncpy_from_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r3, #0 - strb r3, [r0, #0] @ null terminate - mov r0, #-EFAULT - mov pc, lr - .popsection - diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S deleted file mode 100644 index 0ecbb459c4f..00000000000 --- a/arch/arm/lib/strnlen_user.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/lib/strnlen_user.S - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* Prototype: unsigned long __strnlen_user(const char *str, long n) - * Purpose : get length of a string in user memory - * Params : str - address of string in user memory - * Returns : length of string *including terminator* - * or zero on exception, or n + 1 if too long - */ -ENTRY(__strnlen_user) - mov r2, r0 -1: - ldrusr r3, r0, 1 - teq r3, #0 - beq 2f - subs r1, r1, #1 - bne 1b - add r0, r0, #1 -2: sub r0, r0, r2 - mov pc, lr -ENDPROC(__strnlen_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r0, #0 - mov pc, lr - .popsection diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 00000000000..5c908b1cb8e --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/domain.h> + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d1..aaa443b48c9 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396e..bce572a530e 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff9..bc2590d712d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9..9b6ca734f1a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 977127368a7..ef6cedd52e3 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -183,6 +183,13 @@ static struct clk adc_op_clk = { .rate_hz = 13200000, }; +/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ +static struct clk aestdessha_clk = { + .name = "aestdessha_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA, + .type = CLK_TYPE_PERIPHERAL, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -212,6 +219,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, &adc_op_clk, + &aestdessha_clk, // irq0 }; @@ -232,6 +240,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), @@ -388,7 +399,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 3, /* Ethernet */ 0, /* Image Sensor Interface */ 2, /* USB Device High speed port */ - 0, + 0, /* AESTDESSHA Crypto HW Accelerators */ 0, /* Multimedia Card Interface 1 */ 0, 0, /* Advanced Interrupt Controller (IRQ0) */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 40fb79df2de..1b47319ca00 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> +#include <linux/platform_data/atmel-aes.h> #include <linux/platform_data/at91_adc.h> @@ -1292,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1309,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) @@ -1830,6 +1835,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_add_device_serial(void) {} #endif +/* -------------------------------------------------------------------- + * SHA1/SHA256 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE) +static struct resource sha_resources[] = { + { + .start = AT91SAM9G45_BASE_SHA, + .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_sha_device = { + .name = "atmel_sha", + .id = -1, + .resource = sha_resources, + .num_resources = ARRAY_SIZE(sha_resources), +}; + +static void __init at91_add_device_sha(void) +{ + platform_device_register(&at91sam9g45_sha_device); +} +#else +static void __init at91_add_device_sha(void) {} +#endif + +/* -------------------------------------------------------------------- + * DES/TDES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE) +static struct resource tdes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TDES, + .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_tdes_device = { + .name = "atmel_tdes", + .id = -1, + .resource = tdes_resources, + .num_resources = ARRAY_SIZE(tdes_resources), +}; + +static void __init at91_add_device_tdes(void) +{ + platform_device_register(&at91sam9g45_tdes_device); +} +#else +static void __init at91_add_device_tdes(void) {} +#endif + +/* -------------------------------------------------------------------- + * AES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) +static struct aes_platform_data aes_data; +static u64 aes_dmamask = DMA_BIT_MASK(32); + +static struct resource aes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_AES, + .end = AT91SAM9G45_BASE_AES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_aes_device = { + .name = "atmel_aes", + .id = -1, + .dev = { + .dma_mask = &aes_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &aes_data, + }, + .resource = aes_resources, + .num_resources = ARRAY_SIZE(aes_resources), +}; + +static void __init at91_add_device_aes(void) +{ + struct at_dma_slave *atslave; + struct aes_dma_data *alt_atslave; + + alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL); + + /* DMA TX slave channel configuration */ + atslave = &alt_atslave->txdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | + ATC_SRC_PER(AT_DMA_ID_AES_RX); + + /* DMA RX slave channel configuration */ + atslave = &alt_atslave->rxdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | + ATC_DST_PER(AT_DMA_ID_AES_TX); + + aes_data.dma_slave = alt_atslave; + platform_device_register(&at91sam9g45_aes_device); +} +#else +static void __init at91_add_device_aes(void) {} +#endif /* -------------------------------------------------------------------- */ /* @@ -1847,6 +1976,9 @@ static int __init at91_add_standard_devices(void) at91_add_device_trng(); at91_add_device_watchdog(); at91_add_device_tc(); + at91_add_device_sha(); + at91_add_device_tdes(); + at91_add_device_aes(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff93217..b3d365dadef 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea..188c82971eb 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 3a4da24d591..8eba1021f53 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -136,6 +136,8 @@ #define AT_DMA_ID_SSC1_RX 8 #define AT_DMA_ID_AC97_TX 9 #define AT_DMA_ID_AC97_RX 10 +#define AT_DMA_ID_AES_TX 11 +#define AT_DMA_ID_AES_RX 12 #define AT_DMA_ID_MCI1 13 #endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 2ce1ef07c13..ab99c3c3b75 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -62,7 +62,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -72,7 +71,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -106,7 +104,6 @@ config MACH_DAVINCI_DM6467_EVM default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x select MACH_DAVINCI_DM6467TEVM - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -120,7 +117,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -132,7 +128,6 @@ config MACH_DAVINCI_DA830_EVM default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -219,7 +214,6 @@ config MACH_TNETV107X config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select MISC_DEVICES select EEPROM_AT24 select I2C help diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca..f6b9fc70161 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index d1624a315c9..783eab6845c 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -546,6 +546,7 @@ static struct lcd_ctrl_config lcd_cfg = { .sync_edge = 0, .sync_ctrl = 1, .raster_order = 0, + .fifo_th = 6, }; struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 9493076fc59..6321567d8ea 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -101,8 +101,9 @@ void __init dove_ehci1_init(void) ****************************************************************************/ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, - DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0); + orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index f07fd16e0c9..9bc97a5baaa 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -20,22 +20,6 @@ #include <mach/bridge-regs.h> #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int irqoff; - BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO); - - irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 : - 3 + irq - IRQ_DOVE_GPIO_24_31; - - orion_gpio_irq_handler(irqoff << 3); - if (irq == IRQ_DOVE_HIGH_GPIO) { - orion_gpio_irq_handler(40); - orion_gpio_irq_handler(48); - orion_gpio_irq_handler(56); - } -} - static void pmu_irq_mask(struct irq_data *d) { int pin = irq_to_pmu(d->irq); @@ -90,6 +74,27 @@ static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) } } +static int __initdata gpio0_irqs[4] = { + IRQ_DOVE_GPIO_0_7, + IRQ_DOVE_GPIO_8_15, + IRQ_DOVE_GPIO_16_23, + IRQ_DOVE_GPIO_24_31, +}; + +static int __initdata gpio1_irqs[4] = { + IRQ_DOVE_HIGH_GPIO, + 0, + 0, + 0, +}; + +static int __initdata gpio2_irqs[4] = { + 0, + 0, + 0, + 0, +}; + void __init dove_init_irq(void) { int i; @@ -100,19 +105,14 @@ void __init dove_init_irq(void) /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START); - irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); - - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 32); - irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); - - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 64); + orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START, gpio0_irqs); + + orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 32, gpio1_irqs); + + orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* * Mask and clear PMU interrupts diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 26fe9de35ec..2f51293c187 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -620,10 +620,6 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, { .name = "mfc", .devname = "s5p-mfc", .enable = exynos4_clk_ip_mfc_ctrl, @@ -819,47 +815,21 @@ static struct clk *exynos4_clkset_mout_g2d0_list[] = { [1] = &exynos4_clk_sclk_apll.clk, }; -static struct clksrc_sources exynos4_clkset_mout_g2d0 = { +struct clksrc_sources exynos4_clkset_mout_g2d0 = { .sources = exynos4_clkset_mout_g2d0_list, .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), }; -static struct clksrc_clk exynos4_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - static struct clk *exynos4_clkset_mout_g2d1_list[] = { [0] = &exynos4_clk_mout_epll.clk, [1] = &exynos4_clk_sclk_vpll.clk, }; -static struct clksrc_sources exynos4_clkset_mout_g2d1 = { +struct clksrc_sources exynos4_clkset_mout_g2d1 = { .sources = exynos4_clkset_mout_g2d1_list, .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), }; -static struct clksrc_clk exynos4_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_g2d_list[] = { - [0] = &exynos4_clk_mout_g2d0.clk, - [1] = &exynos4_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_g2d = { - .sources = exynos4_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list), -}; - static struct clk *exynos4_clkset_mout_mfc0_list[] = { [0] = &exynos4_clk_mout_mpll.clk, [1] = &exynos4_clk_sclk_apll.clk, @@ -1126,13 +1096,6 @@ static struct clksrc_clk exynos4_clksrcs[] = { .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_mfc", .devname = "s5p-mfc", }, diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h index 28a11970118..bd12d5f8b63 100644 --- a/arch/arm/mach-exynos/clock-exynos4.h +++ b/arch/arm/mach-exynos/clock-exynos4.h @@ -23,6 +23,9 @@ extern struct clksrc_sources exynos4_clkset_group; extern struct clk *exynos4_clkset_aclk_top_list[]; extern struct clk *exynos4_clkset_group_list[]; +extern struct clksrc_sources exynos4_clkset_mout_g2d0; +extern struct clksrc_sources exynos4_clkset_mout_g2d1; + extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index b8689ff60ba..fed4c26e9da 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -48,6 +48,32 @@ static struct clksrc_clk *sysclks[] = { /* nothing here yet */ }; +static struct clksrc_clk exynos4210_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos4210_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *exynos4210_clkset_mout_g2d_list[] = { + [0] = &exynos4210_clk_mout_g2d0.clk, + [1] = &exynos4210_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4210_clkset_mout_g2d = { + .sources = exynos4210_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list), +}; + static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); @@ -74,6 +100,13 @@ static struct clksrc_clk clksrcs[] = { .sources = &exynos4_clkset_group, .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4210_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, }, }; @@ -105,6 +138,10 @@ static struct clk init_clocks_off[] = { .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11), .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 4), + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), }, }; diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index da397d21bbc..8fba0b5fb8a 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -68,12 +68,45 @@ static struct clksrc_clk clk_mout_mpll_user = { .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, }; +static struct clksrc_clk exynos4x12_clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + }, + .sources = &exynos4_clkset_mout_g2d0, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 }, +}; + +static struct clksrc_clk exynos4x12_clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + }, + .sources = &exynos4_clkset_mout_g2d1, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 }, +}; + +static struct clk *exynos4x12_clkset_mout_g2d_list[] = { + [0] = &exynos4x12_clk_mout_g2d0.clk, + [1] = &exynos4x12_clk_mout_g2d1.clk, +}; + +static struct clksrc_sources exynos4x12_clkset_mout_g2d = { + .sources = exynos4x12_clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list), +}; + static struct clksrc_clk *sysclks[] = { &clk_mout_mpll_user, }; static struct clksrc_clk clksrcs[] = { - /* nothing here yet */ + { + .clk = { + .name = "sclk_fimg2d", + }, + .sources = &exynos4x12_clkset_mout_g2d, + .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 }, + }, }; static struct clk init_clocks_off[] = { @@ -102,7 +135,11 @@ static struct clk init_clocks_off[] = { .devname = "exynos-fimc-lite.1", .enable = exynos4212_clk_ip_isp0_ctrl, .ctrlbit = (1 << 3), - } + }, { + .name = "fimg2d", + .enable = exynos4_clk_ip_dmc_ctrl, + .ctrlbit = (1 << 23), + }, }; #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index f98a83a81ce..ea785fcaf6c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1066,12 +1066,8 @@ static struct platform_device nuri_max8903_device = { static void __init nuri_power_init(void) { int gpio; - int irq_base = IRQ_GPIO_END + 1; int ta_en = 0; - nuri_max8997_pdata.irq_base = irq_base; - irq_base += MAX8997_IRQ_NR; - gpio = EXYNOS4_GPX0(7); gpio_request(gpio, "AP_PMIC_IRQ"); s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5a12dc26f49..4e574c24581 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -426,7 +427,6 @@ static struct max8997_platform_data __initdata origen_max8997_pdata = { .buck1_gpiodvs = false, .buck2_gpiodvs = false, .buck5_gpiodvs = false, - .irq_base = IRQ_GPIO_END + 1, .ignore_gpiodvs_side_effect = true, .buck125_default_idx = 0x0, @@ -735,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -782,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..73f2bce097e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24..c0bc83a7663 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7a..020852d3bdd 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index ded4652ada8..3ec8bdd25d0 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,4 @@ -obj-y := clock.o highbank.o system.o smc.o +obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c deleted file mode 100644 index c25a2ae4fde..00000000000 --- a/arch/arm/mach-highbank/clock.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/clkdev.h> - -struct clk { - unsigned long rate; -}; - -int clk_enable(struct clk *clk) -{ - return 0; -} - -void clk_disable(struct clk *clk) -{} - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk->rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -static struct clk eclk = { .rate = 200000000 }; -static struct clk pclk = { .rate = 150000000 }; - -static struct clk_lookup lookups[] = { - { .clk = &pclk, .con_id = "apb_pclk", }, - { .clk = &pclk, .dev_id = "sp804", }, - { .clk = &eclk, .dev_id = "ffe0e000.sdhci", }, - { .clk = &pclk, .dev_id = "fff36000.serial", }, -}; - -void __init highbank_clocks_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8777612b1a4..d75b0a78d88 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -105,6 +105,11 @@ static void __init highbank_init_irq(void) #endif } +static struct clk_lookup lookup = { + .dev_id = "sp804", + .con_id = NULL, +}; + static void __init highbank_timer_init(void) { int irq; @@ -122,6 +127,8 @@ static void __init highbank_timer_init(void) irq = irq_of_parse_and_map(np, 0); highbank_clocks_init(); + lookup.clk = of_clk_get(np, 0); + clkdev_add(&lookup); sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4c..d004d37ad9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9f..d20d4795f4e 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); @@ -243,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb16..f69ca468004 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f..1253af2d997 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10ba..65fb8bcd86c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd..4bdcaa97bd9 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e2..4233d9e3531 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb128a..7e49deb128a 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1a..f8f7437c83b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab3273f9..5985ed1b8c9 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a7..045b3f6a387 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 388928fdb11..f3f5c6542ab 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -89,11 +89,11 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { - /* i.mx25 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); - mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + /* i.mx25 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); pinctrl_provide_dummies(); /* i.mx25 has the i.mx35 type sdma */ diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index fe96105109b..9d2c843bde0 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -272,10 +272,9 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); - /* i.mx35 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); pinctrl_provide_dummies(); if (to_version == 1) { diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index f19d604e1b2..52d8f534be1 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -161,13 +161,13 @@ static const struct resource imx53_audmux_res[] __initconst = { void __init imx50_soc_init(void) { - /* i.mx50 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); - mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); - mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); + /* i.mx50 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); /* i.mx50 has the i.mx31 type audmux */ platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, @@ -176,11 +176,11 @@ void __init imx50_soc_init(void) void __init imx51_soc_init(void) { - /* i.mx51 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + /* i.mx51 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); pinctrl_provide_dummies(); @@ -198,14 +198,14 @@ void __init imx51_soc_init(void) void __init imx53_soc_init(void) { - /* i.mx53 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); - mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); - mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); - mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); - mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); - mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); - mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + /* i.mx53 has the i.mx35 type gpio */ + mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); pinctrl_provide_dummies(); /* i.mx53 has the i.mx35 type sdma */ diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index eaf6c6366ff..3fa6c51390d 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/export.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -21,7 +22,6 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> -#include <linux/clkdev.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -41,17 +41,17 @@ static struct amba_pl010_data integrator_uart_data; #define KMI0_IRQ { IRQ_KMIINT0 } #define KMI1_IRQ { IRQ_KMIINT1 } -static AMBA_APB_DEVICE(rtc, "mb:15", 0, +static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static AMBA_APB_DEVICE(uart0, "mb:16", 0, +static AMBA_APB_DEVICE(uart0, "uart0", 0, INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static AMBA_APB_DEVICE(uart1, "mb:17", 0, +static AMBA_APB_DEVICE(uart1, "uart1", 0, INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); +static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, @@ -61,50 +61,6 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -/* - * These are fixed clocks. - */ -static struct clk clk24mhz = { - .rate = 24000000, -}; - -static struct clk uartclk = { - .rate = 14745600, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { - /* Integrator/AP timer frequency */ - .dev_id = "ap_timer", - .clk = &clk24mhz, - }, { /* UART0 */ - .dev_id = "mb:16", - .clk = &uartclk, - }, { /* UART1 */ - .dev_id = "mb:17", - .clk = &uartclk, - }, { /* KMI0 */ - .dev_id = "mb:18", - .clk = &clk24mhz, - }, { /* KMI1 */ - .dev_id = "mb:19", - .clk = &clk24mhz, - }, { /* MMCI - IntegratorCP */ - .dev_id = "mb:1c", - .clk = &uartclk, - } -}; - -void __init integrator_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - static int __init integrator_init(void) { int i; diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h deleted file mode 100644 index bfe07679fae..00000000000 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <linux/module.h> -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - struct module *owner; - const struct icst_params *params; - void __iomem *vcoreg; - void *data; -}; - -static inline int __clk_get(struct clk *clk) -{ - return try_module_get(clk->owner); -} - -static inline void __clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index c857501c578..3b2267529f5 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/mtd/physmap.h> #include <linux/clk.h> +#include <linux/platform_data/clk-integrator.h> #include <video/vga.h> #include <mach/hardware.h> @@ -174,6 +175,7 @@ static void __init ap_init_irq(void) fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, -1, INTEGRATOR_SC_VALID_INT, NULL); + integrator_clk_init(false); } #ifdef CONFIG_PM @@ -440,6 +442,10 @@ static void integrator_clockevent_init(unsigned long inrate) 0xffffU); } +void __init ap_init_early(void) +{ +} + /* * Set up timer(s). */ @@ -450,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); @@ -471,7 +477,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .reserve = integrator_reserve, .map_io = ap_map_io, .nr_irqs = NR_IRQS_INTEGRATOR_AP, - .init_early = integrator_init_early, + .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, .timer = &ap_timer, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a56c5360893..82d5c837cc7 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -21,8 +21,8 @@ #include <linux/amba/mmci.h> #include <linux/io.h> #include <linux/gfp.h> -#include <linux/clkdev.h> #include <linux/mtd/physmap.h> +#include <linux/platform_data/clk-integrator.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -171,65 +171,10 @@ static void __init intcp_init_irq(void) fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, IRQ_CP_CPPLDINT, sic_mask, NULL); + integrator_clk_init(true); } /* - * Clock handling - */ -#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) - -static const struct icst_params cp_auxvco_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 8, - .vd_max = 263, - .rd_min = 3, - .rd_max = 65, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void cp_auxvco_set(struct clk *clk, struct icst_vco vco) -{ - u32 val; - - val = readl(clk->vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, CM_LOCK); - writel(val, clk->vcoreg); - writel(0, CM_LOCK); -} - -static const struct clk_ops cp_auxclk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = cp_auxvco_set, -}; - -static struct clk cp_auxclk = { - .ops = &cp_auxclk_ops, - .params = &cp_auxvco_params, - .vcoreg = CM_AUXOSC, -}; - -static struct clk sp804_clk = { - .rate = 1000000, -}; - -static struct clk_lookup cp_lookups[] = { - { /* CLCD */ - .dev_id = "mb:c0", - .clk = &cp_auxclk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .clk = &sp804_clk, - }, -}; - -/* * Flash handling. */ static int intcp_flash_init(struct platform_device *dev) @@ -336,10 +281,10 @@ static struct mmci_platform_data mmc_data = { #define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } #define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, +static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, INTEGRATOR_CP_MMC_IRQS, &mmc_data); -static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, +static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, INTEGRATOR_CP_AACI_IRQS, NULL); @@ -393,7 +338,7 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, +static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { @@ -406,10 +351,6 @@ static struct amba_device *amba_devs[] __initdata = { static void __init intcp_init_early(void) { - clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); - - integrator_init_early(); - #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK versatile_sched_clock_init(REFCOUNTER, 24000000); #endif diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 199764fe0fb..ca5c15a4e62 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -80,6 +80,35 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. + +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). + +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d2b05907b10..055c85a1cc4 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -25,3 +25,6 @@ obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 02edbdf5b06..a13299d758e 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,3 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 58c2d68f944..4ab35065a14 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,13 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/i2c.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/of.h> #include <linux/gpio.h> #include <linux/input.h> -#include <linux/gpio_keys.h> #include <linux/gpio-fan.h> #include <linux/leds.h> #include <asm/mach-types.h> @@ -35,10 +33,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data dnskw_sata_data = { - .n_ports = 2, -}; - static unsigned int dnskw_mpp_config[] __initdata = { MPP13_UART1_TXD, /* Custom ... */ MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ @@ -73,132 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static struct gpio_led dns325_led_pins[] = { - { - .name = "dns325:white:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns325:white:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns325:red:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns325:red:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns325:red:usb", - .gpio = 29, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns325_led_data = { - .num_leds = ARRAY_SIZE(dns325_led_pins), - .leds = dns325_led_pins, -}; - -static struct platform_device dns325_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns325_led_data, - }, -}; - -static struct gpio_led dns320_led_pins[] = { - { - .name = "dns320:blue:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns320:blue:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns320:orange:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns320:orange:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns320:orange:usb", - .gpio = 35, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns320_led_data = { - .num_leds = ARRAY_SIZE(dns320_led_pins), - .leds = dns320_led_pins, -}; - -static struct platform_device dns320_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns320_led_data, - }, -}; - -static struct i2c_board_info dns325_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, - /* Something at 0x0c also */ -}; - -static struct gpio_keys_button dnskw_button_pins[] = { - { - .code = KEY_POWER, - .gpio = 34, - .desc = "Power button", - .active_low = 1, - }, - { - .code = KEY_EJECTCD, - .gpio = 47, - .desc = "USB unmount button", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 48, - .desc = "Reset button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dnskw_button_data = { - .buttons = dnskw_button_pins, - .nbuttons = ARRAY_SIZE(dnskw_button_pins), -}; - -static struct platform_device dnskw_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dnskw_button_data, - } -}; - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ static struct gpio_fan_speed dnskw_fan_speed[] = { { 0, 0 }, @@ -245,20 +113,9 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_sata_init(&dnskw_sata_data); - kirkwood_i2c_init(); - platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); - if (of_machine_is_compatible("dlink,dns-325")) { - i2c_register_board_info(0, dns325_i2c_board_info, - ARRAY_SIZE(dns325_i2c_board_info)); - platform_device_register(&dns325_led_device); - - } else if (of_machine_is_compatible("dlink,dns-320")) - platform_device_register(&dns320_led_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 55e357ab292..aeb234d0d0e 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/of.h> @@ -23,7 +22,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/leds.h> #include <linux/mtd/physmap.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> @@ -36,42 +34,6 @@ #include "common.h" #include "mpp.h" -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; @@ -80,45 +42,10 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - static unsigned int dreamplug_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -137,15 +64,8 @@ void __init dreamplug_init(void) */ kirkwood_mpp_conf(dreamplug_mpp_config); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); - - platform_device_register(&dreamplug_leds); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index edc3f8a9d45..e4eb450de30 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -18,6 +18,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/bridge-regs.h> +#include <plat/irq.h> #include "common.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { @@ -25,6 +26,16 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; +struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + {}, +}; + static void __init kirkwood_dt_init(void) { pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); @@ -47,7 +58,6 @@ static void __init kirkwood_dt_init(void) kirkwood_clk_init(); /* internal devices that every board has */ - kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); kirkwood_crypto_init(); @@ -68,7 +78,17 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("raidsonic,ib-nas62x0")) ib62x0_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); + if (of_machine_is_compatible("qnap,ts219")) + qnap_dt_ts219_init(); + + if (of_machine_is_compatible("seagate,goflexnet")) + goflexnet_init(); + + if (of_machine_is_compatible("buffalo,lsxl")) + lsxl_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, + kirkwood_auxdata_lookup, NULL); } static const char *kirkwood_dt_board_compat[] = { @@ -77,6 +97,9 @@ static const char *kirkwood_dt_board_compat[] = { "dlink,dns-325", "iom,iconnect", "raidsonic,ib-nas62x0", + "qnap,ts219", + "seagate,goflexnet", + "buffalo,lsxl", NULL }; @@ -84,7 +107,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, + .init_irq = orion_dt_init_irq, .timer = &kirkwood_timer, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c new file mode 100644 index 00000000000..413e2c8ef5f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -0,0 +1,71 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-goflexnet.c + * + * Seagate GoFlext Net Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&goflexnet_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index eddf1df8891..cfc47f80e73 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -18,9 +18,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/gpio_keys.h> #include <linux/input.h> -#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -33,10 +31,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data ib62x0_sata_data = { - .n_ports = 2, -}; - static unsigned int ib62x0_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_NF_IO3, @@ -55,69 +49,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static struct gpio_led ib62x0_led_pins[] = { - { - .name = "ib62x0:green:os", - .default_trigger = "default-on", - .gpio = 25, - .active_low = 0, - }, - { - .name = "ib62x0:red:os", - .default_trigger = "none", - .gpio = 22, - .active_low = 0, - }, - { - .name = "ib62x0:red:usb_copy", - .default_trigger = "none", - .gpio = 27, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data ib62x0_led_data = { - .leds = ib62x0_led_pins, - .num_leds = ARRAY_SIZE(ib62x0_led_pins), -}; - -static struct platform_device ib62x0_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ib62x0_led_data, - } -}; - -static struct gpio_keys_button ib62x0_button_pins[] = { - { - .code = KEY_COPY, - .gpio = 29, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 28, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data ib62x0_button_data = { - .buttons = ib62x0_button_pins, - .nbuttons = ARRAY_SIZE(ib62x0_button_pins), -}; - -static struct platform_device ib62x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ib62x0_button_data, - } -}; - static void ib62x0_power_off(void) { gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); @@ -132,9 +63,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - kirkwood_sata_init(&ib62x0_sata_data); - platform_device_register(&ib62x0_led_device); - platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) pm_power_off = ib62x0_power_off; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index b0d3cc49269..d7a9198ed30 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -19,8 +19,6 @@ #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <asm/mach/arch.h> @@ -32,50 +30,6 @@ static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static struct gpio_led iconnect_led_pins[] = { - { - .name = "led_level", - .gpio = 41, - .default_trigger = "default-on", - }, { - .name = "power:blue", - .gpio = 42, - .default_trigger = "timer", - }, { - .name = "power:red", - .gpio = 43, - }, { - .name = "usb1:blue", - .gpio = 44, - }, { - .name = "usb2:blue", - .gpio = 45, - }, { - .name = "usb3:blue", - .gpio = 46, - }, { - .name = "usb4:blue", - .gpio = 47, - }, { - .name = "otb:blue", - .gpio = 48, - }, -}; - -static struct gpio_led_platform_data iconnect_led_data = { - .leds = iconnect_led_pins, - .num_leds = ARRAY_SIZE(iconnect_led_pins), - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct platform_device iconnect_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &iconnect_led_data, - } -}; - static unsigned int iconnect_mpp_config[] __initdata = { MPP12_GPIO, MPP35_GPIO, @@ -90,12 +44,6 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct i2c_board_info __initdata iconnect_board_info[] = { - { - I2C_BOARD_INFO("lm63", 0x4c), - }, -}; - static struct mtd_partition iconnect_nand_parts[] = { { .name = "flash", @@ -142,15 +90,11 @@ void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); - kirkwood_i2c_init(); - i2c_register_board_info(0, iconnect_board_info, - ARRAY_SIZE(iconnect_board_info)); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); platform_device_register(&iconnect_button_device); - platform_device_register(&iconnect_leds); } static int __init iconnect_pci_init(void) diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c new file mode 100644 index 00000000000..83d8975592f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -0,0 +1,135 @@ +/* + * Copyright 2012 (C), Michael Walle <michael@walle.cc> + * + * arch/arm/mach-kirkwood/board-lsxl.c + * + * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not + * converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/gpio-fan.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data lsxl_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data lsxl_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int lsxl_mpp_config[] __initdata = { + MPP10_GPO, /* HDD Power Enable */ + MPP11_GPIO, /* USB Vbus Enable */ + MPP18_GPO, /* FAN High Enable# */ + MPP19_GPO, /* FAN Low Enable# */ + MPP36_GPIO, /* Function Blue LED */ + MPP37_GPIO, /* Alarm LED */ + MPP38_GPIO, /* Info LED */ + MPP39_GPIO, /* Power LED */ + MPP40_GPIO, /* Fan Lock */ + MPP41_GPIO, /* Function Button */ + MPP42_GPIO, /* Power Switch */ + MPP43_GPIO, /* Power Auto Switch */ + MPP48_GPIO, /* Function Red LED */ + 0 +}; + +#define LSXL_GPIO_FAN_HIGH 18 +#define LSXL_GPIO_FAN_LOW 19 +#define LSXL_GPIO_FAN_LOCK 40 + +static struct gpio_fan_alarm lsxl_alarm = { + .gpio = LSXL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lsxl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 1, + }, { + .rpm = 3250, + .ctrl_val = 2, + }, { + .rpm = 5000, + .ctrl_val = 0, + } +}; + +static int lsxl_gpio_list[] = { + LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lsxl_fan_data = { + .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), + .ctrl = lsxl_gpio_list, + .alarm = &lsxl_alarm, + .num_speed = ARRAY_SIZE(lsxl_speeds), + .speed = lsxl_speeds, +}; + +static struct platform_device lsxl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lsxl_fan_data, + }, +}; + +/* + * On the LS-XHL/LS-CHLv2, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ +static void lsxl_power_off(void) +{ + kirkwood_restart('h', NULL); +} + +#define LSXL_GPIO_HDD_POWER 10 +#define LSXL_GPIO_USB_POWER 11 + +void __init lsxl_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(lsxl_mpp_config); + + /* usb and sata power on */ + gpio_set_value(LSXL_GPIO_USB_POWER, 1); + gpio_set_value(LSXL_GPIO_HDD_POWER, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&lsxl_ge00_data); + kirkwood_ge01_init(&lsxl_ge01_data); + platform_device_register(&lsxl_fan_device); + + /* register power-off method */ + pm_power_off = lsxl_power_off; +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c new file mode 100644 index 00000000000..1750e68506c --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -0,0 +1,82 @@ +/* + * + * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT + * + * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> + * + * Based on the board file ts219-setup.c: + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" +#include "tsx1x-common.h" + +static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int qnap_ts219_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ + MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ + 0 +}; + +void __init qnap_dt_ts219_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(qnap_ts219_mpp_config); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + + kirkwood_ge00_init(&qnap_ts219_ge00_data); + kirkwood_ehci_init(); + + pm_power_off = qnap_tsx1x_power_off; +} + +/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f261cd24264..1201191d7f1 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -17,6 +17,7 @@ #include <linux/dma-mapping.h> #include <linux/clk-provider.h> #include <linux/spinlock.h> +#include <linux/mv643xx_i2c.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> @@ -67,6 +68,14 @@ void __init kirkwood_map_io(void) * CLK tree ****************************************************************************/ +static void enable_sata0(void) +{ + /* Enable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2); + /* Enable PHY */ + writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL); +} + static void disable_sata0(void) { /* Disable PLL and IVREF */ @@ -75,6 +84,14 @@ static void disable_sata0(void) writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); } +static void enable_sata1(void) +{ + /* Enable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2); + /* Enable PHY */ + writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL); +} + static void disable_sata1(void) { /* Disable PLL and IVREF */ @@ -107,23 +124,38 @@ static void disable_pcie1(void) } } -/* An extended version of the gated clk. This calls fn() before - * disabling the clock. We use this to turn off PHYs etc. */ +/* An extended version of the gated clk. This calls fn_en()/fn_dis + * before enabling/disabling the clock. We use this to turn on/off + * PHYs etc. */ struct clk_gate_fn { struct clk_gate gate; - void (*fn)(void); + void (*fn_en)(void); + void (*fn_dis)(void); }; #define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate) #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) +static int clk_gate_fn_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); + int ret; + + ret = clk_gate_ops.enable(hw); + if (!ret && gate_fn->fn_en) + gate_fn->fn_en(); + + return ret; +} + static void clk_gate_fn_disable(struct clk_hw *hw) { struct clk_gate *gate = to_clk_gate(hw); struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - if (gate_fn->fn) - gate_fn->fn(); + if (gate_fn->fn_dis) + gate_fn->fn_dis(); clk_gate_ops.disable(hw); } @@ -135,7 +167,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock, - void (*fn)(void)) + void (*fn_en)(void), void (*fn_dis)(void)) { struct clk_gate_fn *gate_fn; struct clk *clk; @@ -159,11 +191,14 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; - gate_fn->fn = fn; + gate_fn->fn_en = fn_en; + gate_fn->fn_dis = fn_dis; - /* ops is the gate ops, but with our disable function */ - if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { + /* ops is the gate ops, but with our enable/disable functions */ + if (clk_gate_fn_ops.enable != clk_gate_fn_enable || + clk_gate_fn_ops.disable != clk_gate_fn_disable) { clk_gate_fn_ops = clk_gate_ops; + clk_gate_fn_ops.enable = clk_gate_fn_enable; clk_gate_fn_ops.disable = clk_gate_fn_disable; } @@ -187,11 +222,12 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) static struct clk __init *kirkwood_register_gate_fn(const char *name, u8 bit_idx, - void (*fn)(void)) + void (*fn_en)(void), + void (*fn_dis)(void)) { return clk_register_gate_fn(NULL, name, "tclk", 0, (void __iomem *)CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock, fn); + bit_idx, 0, &gating_lock, fn_en, fn_dis); } static struct clk *ge0, *ge1; @@ -208,18 +244,18 @@ void __init kirkwood_clk_init(void) ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0); ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0, - disable_sata0); + enable_sata0, disable_sata0); sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1, - disable_sata1); + enable_sata1, disable_sata1); usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0); sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO); crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0); xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1); pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0, - disable_pcie0); + NULL, disable_pcie0); pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1, - disable_pcie1); + NULL, disable_pcie1); audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO); kirkwood_register_gate("tdm", CGC_BIT_TDM); kirkwood_register_gate("tsu", CGC_BIT_TSU); @@ -241,6 +277,12 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + + /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., + * so should never be gated. + */ + clk_prepare_enable(runit); } /***************************************************************************** @@ -259,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -273,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } @@ -475,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9248fa2c165..304dd1abfdc 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_TS219_DT +void qnap_dt_ts219_init(void); +#else +static inline void qnap_dt_ts219_init(void) {}; +#endif #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT void dnskw_init(void); @@ -77,6 +82,18 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_GOFLEXNET_DT +void goflexnet_init(void); +#else +static inline void goflexnet_init(void) {}; +#endif + +#ifdef CONFIG_MACH_LSXL_DT +void lsxl_init(void); +#else +static inline void lsxl_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d9335937959..be90b7d0e10 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index c4c68e5b94f..720063ffa19 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -9,20 +9,23 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> -#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7); - BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23); +static int __initdata gpio0_irqs[4] = { + IRQ_KIRKWOOD_GPIO_LOW_0_7, + IRQ_KIRKWOOD_GPIO_LOW_8_15, + IRQ_KIRKWOOD_GPIO_LOW_16_23, + IRQ_KIRKWOOD_GPIO_LOW_24_31, +}; - orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3); -} +static int __initdata gpio1_irqs[4] = { + IRQ_KIRKWOOD_GPIO_HIGH_0_7, + IRQ_KIRKWOOD_GPIO_HIGH_8_15, + IRQ_KIRKWOOD_GPIO_HIGH_16_23, + 0, +}; void __init kirkwood_init_irq(void) { @@ -32,17 +35,8 @@ void __init kirkwood_init_irq(void) /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); - - orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, - gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); + orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f516e74ce0d..5c3d61ee729 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -14,6 +14,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <mach/irqs.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f951937..7e8a5a2e1ec 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index db0117ec55f..e012dc8391c 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -127,7 +127,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710ef..a9bc84180d2 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9..3057f7d4329 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index e421b701663..eff9a750bbe 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -9,19 +9,17 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> #include <linux/irq.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_MV78XX0_GPIO_0_7, + IRQ_MV78XX0_GPIO_8_15, + IRQ_MV78XX0_GPIO_16_23, + IRQ_MV78XX0_GPIO_24_31, +}; void __init mv78xx0_init_irq(void) { @@ -34,11 +32,7 @@ void __init mv78xx0_init_irq(void) * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, - IRQ_MV78XX0_GPIO_START); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); + IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf..9a8bbda195b 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb43..fed3695a133 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 648bdd05d38..8dabfe81d07 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -162,7 +162,7 @@ enum mac_oui { static void __init update_fec_mac_prop(enum mac_oui oui) { struct device_node *np, *from = NULL; - struct property *oldmac, *newmac; + struct property *newmac; const u32 *ocotp = mxs_get_ocotp(); u8 *macaddr; u32 val; @@ -208,11 +208,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui) macaddr[4] = (val >> 8) & 0xff; macaddr[5] = (val >> 0) & 0xff; - oldmac = of_find_property(np, newmac->name, NULL); - if (oldmac) - prom_update_property(np, newmac, oldmac); - else - prom_add_property(np, newmac); + prom_update_property(np, newmac); } } diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 2cdf6ef69be..d122ee6ab99 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -69,29 +69,6 @@ void netx_clcd_remove(struct clcd_fb *fb) fb->fb.screen_base, fb->fb.fix.smem_start); } -void clk_disable(struct clk *clk) -{ -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -int clk_enable(struct clk *clk) -{ - return 0; -} - -struct clk *clk_get(struct device *dev, const char *id) -{ - return dev && strcmp(dev_name(dev), "fb") == 0 ? NULL : ERR_PTR(-ENOENT); -} - -void clk_put(struct clk *clk) -{ -} - static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index da0e37d4082..e1362ce4849 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -54,7 +54,6 @@ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, .cleanup = mmc_cleanup, - .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index f8242aa9b76..c74daace8cd 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -36,7 +36,6 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, */ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, - .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4007a372481..2c0ca8fc338 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -185,7 +185,6 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, - .dma_mask = 0xffffffff, .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index cc71a26723e..355980321c2 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -288,8 +288,7 @@ palmz71_gpio_setup(int early) } gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - palmz71_powercable, IRQF_SAMPLE_RANDOM, - "palmz71-cable", NULL)) + palmz71_powercable, 0, "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd0fbf76ac7..346fd26f3aa 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,12 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -230,10 +232,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3f9c4..34c2c7f59f0 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 519bcd3079e..e5fa46bfde2 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -311,7 +311,7 @@ static void __init omap_apollon_init(void) /* LCD PWR_EN */ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ + /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); v |= (1 << 24); omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482..28214483aab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 2c5d0ed7528..677357ff61a 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -468,7 +468,6 @@ static struct omap_mmc_platform_data mmc1_data = { .cleanup = n8x0_mmc_cleanup, .shutdown = n8x0_mmc_shutdown, .max_freq = 24000000, - .dma_mask = 0xffffffff, .slots[0] = { .wires = 4, .set_power = n8x0_mmc_set_power, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5e..0d362e9f9cb 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b627cdc12b8..70f6d1d2546 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -106,7 +106,7 @@ static struct platform_device leds_gpio = { static struct omap_abe_twl6040_data panda_abe_audio_data = { /* Audio out */ .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - /* HandsFree through expasion connector */ + /* HandsFree through expansion connector */ .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7ca4d..ae27de8899a 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 91b3d5c60bf..83bed9ad301 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3376,15 +3376,15 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX), + CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68dbecfa..f99e65cfb86 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338fe4d3..975f6bda0e0 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457..c1875862679 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 02d15bbd4e3..288bee6cbb7 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -21,6 +21,7 @@ #include "common.h" #include "pm.h" #include "prm.h" +#include "clockdomain.h" /* Machine specific information */ struct omap4_idle_statedata { @@ -47,10 +48,14 @@ static struct omap4_idle_statedata omap4_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; +static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS]; +static struct clockdomain *cpu_clkdm[NR_CPUS]; + +static atomic_t abort_barrier; +static bool cpu_done[NR_CPUS]; /** - * omap4_enter_idle - Programs OMAP4 to enter the specified state + * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * @dev: cpuidle device * @drv: cpuidle driver * @index: the index of state to be entered @@ -59,60 +64,84 @@ static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; * specified low power state selected by the governor. * Returns the amount of time spent in the low power state. */ -static int omap4_enter_idle(struct cpuidle_device *dev, +static int omap4_enter_idle_simple(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + local_fiq_disable(); + omap_do_wfi(); + local_fiq_enable(); + + return index; +} + +static int omap4_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct omap4_idle_statedata *cx = &omap4_idle_data[index]; - u32 cpu1_state; int cpu_id = smp_processor_id(); local_fiq_disable(); /* - * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state. + * CPU0 has to wait and stay ON until CPU1 is OFF state. * This is necessary to honour hardware recommondation * of triggeing all the possible low power modes once CPU1 is * out of coherency and in OFF mode. - * Update dev->last_state so that governor stats reflects right - * data. */ - cpu1_state = pwrdm_read_pwrst(cpu1_pd); - if (cpu1_state != PWRDM_POWER_OFF) { - index = drv->safe_state_index; - cx = &omap4_idle_data[index]; + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + while (pwrdm_read_pwrst(cpu_pd[1]) != PWRDM_POWER_OFF) { + cpu_relax(); + + /* + * CPU1 could have already entered & exited idle + * without hitting off because of a wakeup + * or a failed attempt to hit off mode. Check for + * that here, otherwise we could spin forever + * waiting for CPU1 off. + */ + if (cpu_done[1]) + goto fail; + + } } - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. */ - if (cx->cpu_state == PWRDM_POWER_OFF) - cpu_pm_enter(); - - pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); - omap_set_pwrdm_state(mpu_pd, cx->mpu_state); - - /* - * Call idle CPU cluster PM enter notifier chain - * to save GIC and wakeupgen context. - */ - if ((cx->mpu_state == PWRDM_POWER_RET) && - (cx->mpu_logic_state == PWRDM_POWER_OFF)) - cpu_cluster_pm_enter(); + cpu_pm_enter(); + + if (dev->cpu == 0) { + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + + /* + * Call idle CPU cluster PM enter notifier chain + * to save GIC and wakeupgen context. + */ + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) + cpu_cluster_pm_enter(); + } omap4_enter_lowpower(dev->cpu, cx->cpu_state); + cpu_done[dev->cpu] = true; + + /* Wakeup CPU1 only if it is not offlined */ + if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { + clkdm_wakeup(cpu_clkdm[1]); + clkdm_allow_idle(cpu_clkdm[1]); + } /* * Call idle CPU PM exit notifier chain to restore - * VFP and per CPU IRQ context. Only CPU0 state is - * considered since CPU1 is managed by CPU hotplug. + * VFP and per CPU IRQ context. */ - if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF) - cpu_pm_exit(); + cpu_pm_exit(); /* * Call idle CPU cluster PM exit notifier chain @@ -121,8 +150,11 @@ static int omap4_enter_idle(struct cpuidle_device *dev, if (omap4_mpuss_read_prev_context_state()) cpu_cluster_pm_exit(); - if (index > 0) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + +fail: + cpuidle_coupled_parallel_barrier(dev, &abort_barrier); + cpu_done[dev->cpu] = false; local_fiq_enable(); @@ -141,7 +173,7 @@ struct cpuidle_driver omap4_idle_driver = { .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .enter = omap4_enter_idle_simple, .name = "C1", .desc = "MPUSS ON" }, @@ -149,8 +181,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C2", .desc = "MPUSS CSWR", }, @@ -158,8 +190,8 @@ struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .enter = omap4_enter_idle_coupled, .name = "C3", .desc = "MPUSS OSWR", }, @@ -168,6 +200,16 @@ struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + /** * omap4_idle_init - Init routine for OMAP4 idle * @@ -180,19 +222,31 @@ int __init omap4_idle_init(void) unsigned int cpu_id = 0; mpu_pd = pwrdm_lookup("mpu_pwrdm"); - cpu0_pd = pwrdm_lookup("cpu0_pwrdm"); - cpu1_pd = pwrdm_lookup("cpu1_pwrdm"); - if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) + cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); + cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); + if ((!mpu_pd) || (!cpu_pd[0]) || (!cpu_pd[1])) return -ENODEV; - dev = &per_cpu(omap4_idle_dev, cpu_id); - dev->cpu = cpu_id; - - cpuidle_register_driver(&omap4_idle_driver); + cpu_clkdm[0] = clkdm_lookup("mpu0_clkdm"); + cpu_clkdm[1] = clkdm_lookup("mpu1_clkdm"); + if (!cpu_clkdm[0] || !cpu_clkdm[1]) + return -ENODEV; - if (cpuidle_register_device(dev)) { - pr_err("%s: CPUidle register device failed\n", __func__); - return -EIO; + /* Configure the broadcast timer on each cpu */ + on_each_cpu(omap_setup_broadcast_timer, NULL, 1); + + for_each_cpu(cpu_id, cpu_online_mask) { + dev = &per_cpu(omap4_idle_dev, cpu_id); + dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED + dev->coupled_cpus = *cpu_online_mask; +#endif + cpuidle_register_driver(&omap4_idle_driver); + + if (cpuidle_register_device(dev)) { + pr_err("%s: CPUidle register failed\n", __func__); + return -EIO; + } } return 0; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 5fb47a14f4b..af1ed7d24a1 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -37,6 +37,7 @@ #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 +#define DISPC_CONTROL3 0x0848 #define DISPC_IRQSTATUS 0x0018 #define DSS_SYSCONFIG 0x10 @@ -52,6 +53,7 @@ #define EVSYNC_EVEN_IRQ_SHIFT 2 #define EVSYNC_ODD_IRQ_SHIFT 3 #define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONE3_IRQ_SHIFT 30 #define FRAMEDONETV_IRQ_SHIFT 24 /* @@ -376,7 +378,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) static void dispc_disable_outputs(void) { u32 v, irq_mask = 0; - bool lcd_en, digit_en, lcd2_en = false; + bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; int i; struct omap_dss_dispc_dev_attr *da; struct omap_hwmod *oh; @@ -405,7 +407,13 @@ static void dispc_disable_outputs(void) lcd2_en = v & LCD_EN_MASK; } - if (!(lcd_en | digit_en | lcd2_en)) + /* store value of LCDENABLE for LCD3 */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + lcd3_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) return; /* no managers currently enabled */ /* @@ -426,10 +434,12 @@ static void dispc_disable_outputs(void) if (lcd2_en) irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + if (lcd3_en) + irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; /* * clear any previous FRAMEDONE, FRAMEDONETV, - * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts */ omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); @@ -445,12 +455,19 @@ static void dispc_disable_outputs(void) omap_hwmod_write(v, oh, DISPC_CONTROL2); } + /* disable LCD3 manager */ + if (da->manager_count > 3) { + v = omap_hwmod_read(oh, DISPC_CONTROL3); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL3); + } + i = 0; while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != irq_mask) { i++; if (i > FRAMEDONE_IRQ_TIMEOUT) { - pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); break; } mdelay(1); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index be697d4e084..a9675d8d182 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -315,7 +315,6 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].caps = c->caps; mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; - mmc->dma_mask = 0xffffffff; mmc->max_freq = c->max_freq; if (cpu_is_omap44xx()) mmc->reg_offset = OMAP4_MMC_REG_OFFSET; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a1..76f9b3c2f58 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index e35a86bf4e1..637a1bdf2ac 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -313,7 +313,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) scu_pwrst_prepare(cpu, power_state); /* - * CPU never retuns back if targetted power state is OFF mode. + * CPU never retuns back if targeted power state is OFF mode. * CPU ONLINE follows normal CPU ONLINE ptah via * omap_secondary_startup(). */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 7d118b9bdd5..9a35adf9123 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -125,7 +125,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) booted = true; } - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); /* * Now the secondary core is starting up let it run its diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebfaa19..330d4c6e746 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968..37afbd173c2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e38200216..ce7e6068768 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee498ce..afb60917a94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6032,7 +6032,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6068,7 +6068,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6099,7 +6099,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101..c95415da23c 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65db..05bd8f02723 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b19..91e71d8f46f 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index e107e3915a8..d033a65f4e4 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -131,7 +131,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) omap_voltage_get_volttable(sr_data->voltdm, &volt_data); if (!volt_data) { - pr_warning("%s: No Voltage table registerd fo VDD%d." + pr_warning("%s: No Voltage table registered fo VDD%d." "Something really wrong\n\n", __func__, i + 1); goto exit; } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 13d20c8a283..2ba4f57dda8 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -130,6 +130,7 @@ static struct clock_event_device clockevent_gpt = { .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, + .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, .set_mode = omap2_gp_timer_set_mode, }; @@ -223,7 +224,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, clockevent_delta2ns(3, &clockevent_gpt); /* Timer internal resynch latency. */ - clockevent_gpt.cpumask = cpumask_of(0); + clockevent_gpt.cpumask = cpu_possible_mask; + clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); clockevents_register_device(&clockevent_gpt); pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", @@ -258,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -297,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 3882f3c7608..db5ff664237 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; @@ -96,7 +97,7 @@ void __init omap4_pmic_init(const char *pmic_type, void __init omap_pmic_late_init(void) { - /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + /* Init the OMAP TWL parameters (if PMIC has been registered) */ if (pmic_i2c_board_info.irq) omap3_twl_init(); if (omap4_i2c1_board_info[0].irq) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0d..410291c6766 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index b1b45fff776..17da7091d31 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -11,19 +11,16 @@ */ #include <linux/gpio.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> -#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_ORION5X_GPIO_0_7, + IRQ_ORION5X_GPIO_8_15, + IRQ_ORION5X_GPIO_16_23, + IRQ_ORION5X_GPIO_24_31, +}; void __init orion5x_init_irq(void) { @@ -32,9 +29,6 @@ void __init orion5x_init_irq(void) /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); - irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 0d024b1e916..f224107de7b 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -132,11 +132,11 @@ static void sirfsoc_clocksource_resume(struct clocksource *cs) { int i; - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); } static struct clock_event_device sirfsoc_clockevent = { diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h deleted file mode 100644 index b96949dd5ad..00000000000 --- a/arch/arm/mach-pxa/eseries.h +++ /dev/null @@ -1,14 +0,0 @@ -void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi); - -extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info; -extern struct pxaficp_platform_data e7xx_ficp_platform_data; -extern int e7xx_irda_init(void); - -extern int eseries_tmio_enable(struct platform_device *dev); -extern int eseries_tmio_disable(struct platform_device *dev); -extern int eseries_tmio_suspend(struct platform_device *dev); -extern int eseries_tmio_resume(struct platform_device *dev); -extern void eseries_get_tmio_gpios(void); -extern struct resource eseries_tmio_resources[]; -extern struct platform_device e300_tc6387xb_device; - diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d3de84b0dcb..e6311988add 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -296,27 +296,11 @@ static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { static struct resource asic3_resources[] = { /* GPIO part */ - [0] = { - .start = ASIC3_PHYS, - .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT), + [1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)), /* SD part */ - [2] = { - .start = ASIC3_SD_PHYS, - .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .flags = IORESOURCE_IRQ, - }, + [2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT), + [3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)), }; static struct asic3_platform_data asic3_platform_data = { @@ -343,11 +327,7 @@ static struct platform_device asic3 = { */ static struct resource egpio_resources[] = { - [0] = { - .start = PXA_CS5_PHYS, - .end = PXA_CS5_PHYS + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4), }; static struct htc_egpio_chip egpio_chips[] = { @@ -537,11 +517,7 @@ static struct w100fb_mach_info w3220_info = { }; static struct resource w3220_resources[] = { - [0] = { - .start = ATI_W3220_PHYS, - .end = ATI_W3220_PHYS + 0x00ffffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M), }; static struct platform_device w3220 = { @@ -683,20 +659,12 @@ static struct pda_power_pdata power_supply_info = { }; static struct resource power_supply_resources[] = { - [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), - .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), - }, - [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), - .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), - }, + [0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac", + IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE), + [1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb", + IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE), }; static struct platform_device power_supply = { diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h index a3e5f86ef67..628819995c5 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -7,17 +7,17 @@ * OS Timer & Match Registers */ -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ +#define OSMR0 io_p2v(0x40A00000) /* */ +#define OSMR1 io_p2v(0x40A00004) /* */ +#define OSMR2 io_p2v(0x40A00008) /* */ +#define OSMR3 io_p2v(0x40A0000C) /* */ +#define OSMR4 io_p2v(0x40A00080) /* */ +#define OSCR io_p2v(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 io_p2v(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 io_p2v(0x40A000C0) /* */ +#define OSSR io_p2v(0x40A00014) /* OS Timer Status Register */ +#define OWER io_p2v(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER io_p2v(0x40A0001C) /* OS Timer Interrupt Enable Register */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6bb3f47b1f1..0ca0db78790 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -456,7 +456,7 @@ static int lubbock_mci_init(struct device *dev, init_timer(&mmc_timer); mmc_timer.data = (unsigned long) data; return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, - IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data); + 0, "lubbock-sd-detect", data); } static int lubbock_mci_get_ro(struct device *dev) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 2db697cd2b4..39561dcf65f 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -633,9 +633,8 @@ static struct platform_device bq24022 = { static int magician_mci_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_MAGICIAN_SD, detect_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - "mmc card detect", data); + return request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED, + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e9..d89d87ae144 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index b4528899ef0..3fab583755d 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -77,9 +77,10 @@ static void do_gpio_reset(void) static void do_hw_reset(void) { /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ + writel_relaxed(OWER_WME, OWER); + writel_relaxed(OSSR_M3, OSSR); + /* ... in 100 ms */ + writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3); } void pxa_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 3d6c9bd90de..4bc47d63698 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -35,7 +35,7 @@ static u32 notrace pxa_read_sched_clock(void) { - return OSCR; + return readl_relaxed(OSCR); } @@ -47,8 +47,8 @@ pxa_ost0_interrupt(int irq, void *dev_id) struct clock_event_device *c = dev_id; /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); c->event_handler(c); return IRQ_HANDLED; @@ -59,10 +59,10 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) { unsigned long next, oscr; - OIER |= OIER_E0; - next = OSCR + delta; - OSMR0 = next; - oscr = OSCR; + writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); + next = readl_relaxed(OSCR) + delta; + writel_relaxed(next, OSMR0); + oscr = readl_relaxed(OSCR); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -72,15 +72,15 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) { switch (mode) { case CLOCK_EVT_MODE_ONESHOT: - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* initializing, released, or preparing for suspend */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_RESUME: @@ -108,8 +108,8 @@ static void __init pxa_timer_init(void) { unsigned long clock_tick_rate = get_clock_tick_rate(); - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); @@ -122,7 +122,7 @@ static void __init pxa_timer_init(void) setup_irq(IRQ_OST0, &pxa_ost0_irq); - clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32, + clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, clocksource_mmio_readl_up); clockevents_register_device(&ckevt_pxa_osmr0); } @@ -132,12 +132,12 @@ static unsigned long osmr[4], oier, oscr; static void pxa_timer_suspend(void) { - osmr[0] = OSMR0; - osmr[1] = OSMR1; - osmr[2] = OSMR2; - osmr[3] = OSMR3; - oier = OIER; - oscr = OSCR; + osmr[0] = readl_relaxed(OSMR0); + osmr[1] = readl_relaxed(OSMR1); + osmr[2] = readl_relaxed(OSMR2); + osmr[3] = readl_relaxed(OSMR3); + oier = readl_relaxed(OIER); + oscr = readl_relaxed(OSCR); } static void pxa_timer_resume(void) @@ -151,12 +151,12 @@ static void pxa_timer_resume(void) if (osmr[0] - oscr < MIN_OSCR_DELTA) osmr[0] += MIN_OSCR_DELTA; - OSMR0 = osmr[0]; - OSMR1 = osmr[1]; - OSMR2 = osmr[2]; - OSMR3 = osmr[3]; - OIER = oier; - OSCR = oscr; + writel_relaxed(osmr[0], OSMR0); + writel_relaxed(osmr[1], OSMR1); + writel_relaxed(osmr[2], OSMR2); + writel_relaxed(osmr[3], OSMR3); + writel_relaxed(oier, OIER); + writel_relaxed(oscr, OSCR); } #else #define pxa_timer_suspend NULL diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 2b6ac00b2cd..166dd32cc1d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -332,8 +332,8 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, int err; err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, - "MMC card detect", data); + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "MMC card detect", data); if (err) { printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" "MMC card detect IRQ\n"); diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b7..d56b0f7f2b2 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index fcf3dcabb69..c0537f40a3d 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -12,6 +12,9 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_S3C64XX_PM_CORE_H +#define __MACH_S3C64XX_PM_CORE_H __FILE__ + #include <mach/regs-gpio.h> static inline void s3c_pm_debug_init_uart(void) @@ -113,3 +116,4 @@ static inline void samsung_pm_saved_gpios(void) __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); } +#endif /* __MACH_S3C64XX_PM_CORE_H */ diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d1dc7f1a239..d673211f121 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -362,7 +362,7 @@ static void __init assabet_init(void) static void __init map_sa1100_gpio_regs( void ) { unsigned long phys = __PREG(GPLR) & PMD_MASK; - unsigned long virt = io_p2v(phys); + unsigned long virt = (unsigned long)io_p2v(phys); int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO); pmd_t *pmd; diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 19b2053f5af..e8f4d1e1923 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -87,6 +87,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/io.h> #include <asm/cputype.h> diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 675bf8ef97e..48c45b0c92b 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -19,6 +19,7 @@ #include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/moduleparam.h> #include <linux/types.h> diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 3f2d1b60188..0ac6cc08a19 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -830,14 +830,14 @@ * (read/write). */ -#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */ -#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */ -#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */ -#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */ -#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */ -#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */ -#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */ -#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */ +#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */ +#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */ +#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */ +#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */ +#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */ +#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */ +#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */ +#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */ #define OSSR_M(Nb) /* Match detected [0..3] */ \ (0x00000001 << (Nb)) diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index a38fc4f5424..6a9eecf3137 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -24,6 +24,7 @@ #ifndef __ASM_ARCH_SA1100_GPIO_H #define __ASM_ARCH_SA1100_GPIO_H +#include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 99f5856d8de..cbedd75a9d6 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -32,7 +32,7 @@ #define PIO_START 0x80000000 /* physical start of IO space */ #define io_p2v( x ) \ - ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) + IOMEM( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) #define io_v2p( x ) \ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START ) @@ -47,6 +47,8 @@ #define CPU_SA1110_ID (0x6901b110) #define CPU_SA1110_MASK (0xfffffff0) +#define __MREG(x) IOMEM(io_p2v(x)) + #ifndef __ASSEMBLY__ #include <asm/cputype.h> @@ -56,7 +58,7 @@ #define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID) #define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID) -# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x))) # define __PREG(x) (io_v2p((unsigned long)&(x))) static inline unsigned long get_clock_tick_rate(void) diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 6cb39ddde65..5cf71da60e4 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -8,6 +8,8 @@ #include "hardware.h" +#define IOMEM(x) (x) + /* * The following code assumes the serial port has already been * initialized by the bootloader. We search for the first enabled diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 516ccc25d7f..2124f1fc2fb 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/ioport.h> #include <linux/syscore_ops.h> diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index b412fc09c80..7f07f08d896 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <linux/io.h> #include <mach/hardware.h> #include <mach/jornada720.h> diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 040540fb7d8..30fc3b2bf55 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -4,6 +4,7 @@ * Author: ??? */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e6..f8e47235bab 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c index a51830c60e5..50a5b143b46 100644 --- a/arch/arm/mach-sa1100/leds-lart.c +++ b/arch/arm/mach-sa1100/leds-lart.c @@ -10,6 +10,7 @@ * pace of the LED. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 690cf0ce5c0..6645d1e31f1 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -23,6 +23,7 @@ * Storage is local on the stack now. */ #include <linux/init.h> +#include <linux/io.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 30cc6721665..85863741ef8 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -38,9 +38,9 @@ ENTRY(sa1100_finish_suspend) orr r4, r4, #MDREFR_K1DB2 ldr r5, =PPCR - @ Pre-load __udelay into the I-cache + @ Pre-load __loop_udelay into the I-cache mov r0, #1 - bl __udelay + bl __loop_udelay mov r0, r0 @ The following must all exist in a single cache line to @@ -53,11 +53,11 @@ ENTRY(sa1100_finish_suspend) @ delay 90us and set CPU PLL to lowest speed @ fixes resume problem on high speed SA1110 mov r0, #90 - bl __udelay + bl __loop_udelay mov r1, #0 str r1, [r5] mov r0, #90 - bl __udelay + bl __loop_udelay /* * SA1110 SDRAM controller workaround. register values: diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 6af26e8d55e..80702c9ecc7 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -22,7 +22,7 @@ static u32 notrace sa1100_read_sched_clock(void) { - return OSCR; + return readl_relaxed(OSCR); } #define MIN_OSCR_DELTA 2 @@ -32,8 +32,8 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) struct clock_event_device *c = dev_id; /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); c->event_handler(c); return IRQ_HANDLED; @@ -44,10 +44,10 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) { unsigned long next, oscr; - OIER |= OIER_E0; - next = OSCR + delta; - OSMR0 = next; - oscr = OSCR; + writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); + next = readl_relaxed(OSCR) + delta; + writel_relaxed(next, OSMR0); + oscr = readl_relaxed(OSCR); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -59,8 +59,8 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) case CLOCK_EVT_MODE_ONESHOT: case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - OIER &= ~OIER_E0; - OSSR = OSSR_M0; + writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); + writel_relaxed(OSSR_M0, OSSR); break; case CLOCK_EVT_MODE_RESUME: @@ -86,8 +86,8 @@ static struct irqaction sa1100_timer_irq = { static void __init sa1100_timer_init(void) { - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); @@ -100,7 +100,7 @@ static void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); clockevents_register_device(&ckevt_sa1100_osmr0); } @@ -110,26 +110,26 @@ unsigned long osmr[4], oier; static void sa1100_timer_suspend(void) { - osmr[0] = OSMR0; - osmr[1] = OSMR1; - osmr[2] = OSMR2; - osmr[3] = OSMR3; - oier = OIER; + osmr[0] = readl_relaxed(OSMR0); + osmr[1] = readl_relaxed(OSMR1); + osmr[2] = readl_relaxed(OSMR2); + osmr[3] = readl_relaxed(OSMR3); + oier = readl_relaxed(OIER); } static void sa1100_timer_resume(void) { - OSSR = 0x0f; - OSMR0 = osmr[0]; - OSMR1 = osmr[1]; - OSMR2 = osmr[2]; - OSMR3 = osmr[3]; - OIER = oier; + writel_relaxed(0x0f, OSSR); + writel_relaxed(osmr[0], OSMR0); + writel_relaxed(osmr[1], OSMR1); + writel_relaxed(osmr[2], OSMR2); + writel_relaxed(osmr[3], OSMR3); + writel_relaxed(oier, OIER); /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - OSCR = OSMR0 - LATCH; + writel_relaxed(OSMR0 - LATCH, OSCR); } #else #define sa1100_timer_suspend NULL diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index df33909205e..4cacc2d22fb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -19,6 +19,7 @@ config ARCH_SH7372 select CPU_V7 select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_CPU_SUSPEND if PM || CPU_IDLE config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" @@ -58,6 +59,7 @@ config MACH_G4EVM bool "G4EVM board" depends on ARCH_SH7377 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_AP4EVB bool "AP4EVB board" @@ -65,6 +67,7 @@ config MACH_AP4EVB select ARCH_REQUIRE_GPIOLIB select SH_LCD_MIPI_DSI select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR choice prompt "AP4EVB LCD panel selection" @@ -83,6 +86,7 @@ config MACH_AG5EVM bool "AG5EVM board" select ARCH_REQUIRE_GPIOLIB select SH_LCD_MIPI_DSI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_SH73A0 config MACH_MACKEREL @@ -90,15 +94,18 @@ config MACH_MACKEREL depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KOTA2 bool "KOTA2 board" select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_SH73A0 config MACH_BONITO bool "bonito board" select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on ARCH_R8A7740 config MACH_ARMADILLO800EVA @@ -106,22 +113,28 @@ config MACH_ARMADILLO800EVA depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB select USE_OF + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_WM8978 if SND_SIMPLE_CARD config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 select USE_OF + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 select ARCH_REQUIRE_GPIOLIB select USE_OF + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR comment "SH-Mobile System Configuration" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 8aa1962c22a..0df5ae6740c 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -39,7 +39,9 @@ obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_SHMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o +obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 5a6f22f05e9..d82c010fdfc 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -27,6 +27,8 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> @@ -52,6 +54,12 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc9220_resources[] = { [0] = { .start = 0x14000000, @@ -142,6 +150,13 @@ static struct platform_device fsi_device = { .resource = fsi_resources, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + static struct resource sh_mmcif_resources[] = { [0] = { .name = "MMCIF", @@ -364,6 +379,13 @@ static struct platform_device mipidsi0_device = { }, }; +/* Fixed 2.8V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, @@ -408,8 +430,57 @@ static struct platform_device sdhi0_device = { }, }; -void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply cn4_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn4_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers), + .consumer_supplies = cn4_power_consumers, +}; + +static struct fixed_voltage_config cn4_power_info = { + .supply_name = "CN4 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PORT114, + .enable_high = 1, + .init_data = &cn4_power_init_data, +}; + +static struct platform_device cn4_power = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &cn4_power_info, + }, +}; + +static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PORT114, "sdhi1_power"); + if (!ret) { + power_gpio = GPIO_PORT114; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * If requesting the GPIO above failed, it means, that the regulator got + * probed and grabbed the GPIO, but we don't know, whether the sdhi + * driver already uses the regulator. If it doesn't, we have to toggle + * the GPIO ourselves, even though it is now owned by the fixed + * regulator driver. We have to live with the race in case the driver + * gets unloaded and the GPIO freed between these two steps. + */ gpio_set_value(GPIO_PORT114, state); } @@ -455,6 +526,7 @@ static struct platform_device sdhi1_device = { }; static struct platform_device *ag5evm_devices[] __initdata = { + &cn4_power, ð_device, &keysc_device, &fsi_device, @@ -468,6 +540,12 @@ static struct platform_device *ag5evm_devices[] __initdata = { static void __init ag5evm_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 3300000); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* enable SCIFA2 */ @@ -562,8 +640,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID1_2_PU, NULL); gpio_request(GPIO_FN_SDHID1_1_PU, NULL); gpio_request(GPIO_FN_SDHID1_0_PU, NULL); - gpio_request(GPIO_PORT114, "sdhi1_power"); - gpio_direction_output(GPIO_PORT114, 0); #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index ace60246a5d..f172ca85905 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -34,6 +34,8 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/sh_clk.h> @@ -159,6 +161,27 @@ * CN12: 3.3v */ +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + /* J22 default position: 1.8V */ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* MTD */ static struct mtd_partition nor_flash_partitions[] = { { @@ -1138,21 +1161,6 @@ static void __init fsi_init_pm_clock(void) clk_put(fsia_ick); } -/* - * FIXME !! - * - * gpio_no_direction - * are quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_no_direction(u32 addr) -{ - __raw_writeb(0x00, addr); -} - /* TouchScreen */ #ifdef CONFIG_AP4EVB_QHD # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 @@ -1224,6 +1232,12 @@ static void __init ap4evb_init(void) u32 srcr4; struct clk *clk; + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1302,8 +1316,8 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); - gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ /* card detect pin for MMC slot (CN7) */ gpio_request(GPIO_PORT41, NULL); @@ -1447,14 +1461,14 @@ static void __init ap4evb_init(void) platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device); hdmi_init_pm_clock(); fsi_init_pm_clock(); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9bd135531d7..453a6e50db8 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> #include <linux/usb/renesas_usbhs.h> @@ -37,14 +39,20 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <mach/common.h> #include <mach/irqs.h> +#include <mach/r8a7740.h> +#include <media/mt9t112.h> +#include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/r8a7740.h> #include <video/sh_mobile_lcdc.h> +#include <video/sh_mobile_hdmi.h> +#include <sound/sh_fsi.h> +#include <sound/simple_card.h> /* * CON1 Camera Module @@ -108,6 +116,14 @@ */ /* + * FSI-WM8978 + * + * this command is required when playback. + * + * # amixer set "Headphone" 50 + */ + +/* * USB function * * When you use USB Function, @@ -117,14 +133,8 @@ * These are a little bit complex. * see * usbhsf_power_ctrl() - * - * CAUTION - * - * It uses autonomy mode for USB hotplug at this point - * (= usbhs_private.platform_callback.get_vbus is NULL), - * since we don't know what's happen on PM control - * on this workaround. */ +#define IRQ7 evt2irq(0x02e0) #define USBCR1 0xe605810a #define USBH 0xC6700000 #define USBH_USBCTR 0x10834 @@ -204,6 +214,20 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, } } +static int usbhsf_get_vbus(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PORT209); +} + +static irqreturn_t usbhsf_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + + renesas_usbhs_call_notify_hotplug(pdev); + + return IRQ_HANDLED; +} + static void usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -227,11 +251,14 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->host = NULL; priv->func = NULL; priv->usbh_base = NULL; + + free_irq(IRQ7, pdev); } static int usbhsf_hardware_init(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); + int ret; priv->phy = clk_get(&pdev->dev, "phy"); priv->usb24 = clk_get(&pdev->dev, "usb24"); @@ -251,6 +278,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev) return -EIO; } + ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); + /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ clk_set_rate(priv->usb24, clk_get_rate(clk_get_parent(priv->usb24))); @@ -262,6 +297,7 @@ static struct usbhsf_private usbhsf_private = { .info = { .platform_callback = { .get_id = usbhsf_get_id, + .get_vbus = usbhsf_get_vbus, .hardware_init = usbhsf_hardware_init, .hardware_exit = usbhsf_hardware_exit, .power_ctrl = usbhsf_power_ctrl, @@ -269,6 +305,8 @@ static struct usbhsf_private usbhsf_private = { .driver_param = { .buswait_bwait = 5, .detection_delay = 5, + .d0_rx_id = SHDMA_SLAVE_USBHS_RX, + .d1_tx_id = SHDMA_SLAVE_USBHS_TX, }, } }; @@ -384,14 +422,112 @@ static struct platform_device lcdc0_device = { }, }; +/* + * LCDC1/HDMI + */ +static struct sh_mobile_hdmi_info hdmi_info = { + .flags = HDMI_OUTPUT_PUSH_PULL | + HDMI_OUTPUT_POLARITY_HI | + HDMI_32BIT_REG | + HDMI_HAS_HTOP1 | + HDMI_SND_SRC_SPDIF, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be03ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1700), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "HDMI emma3pf", + .start = 0xe6be4000, + .end = 0xe6be43ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + +static const struct fb_videomode lcdc1_mode = { + .name = "HDMI 720p", + .xres = 1280, + .yres = 720, + .pixclock = 13468, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .refresh = 60, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +}; + +static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */ + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_modes = &lcdc1_mode, + .num_modes = 1, + .tx_dev = &hdmi_device, + .panel_cfg = { + .width = 1280, + .height = 720, + }, + }, +}; + +static struct resource hdmi_lcdc_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe948000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x1780), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), + .resource = hdmi_lcdc_resources, + .id = 1, + .dev = { + .platform_data = &hdmi_lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -407,6 +543,17 @@ static struct platform_device gpio_keys_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + /* SDHI0 */ /* * FIXME @@ -418,6 +565,8 @@ static struct platform_device gpio_keys_device = { */ #define IRQ31 evt2irq(0x33E0) static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ MMC_CAP_NEEDS_POLL, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -458,6 +607,8 @@ static struct platform_device sdhi0_device = { /* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, @@ -532,12 +683,209 @@ static struct platform_device sh_mmcif_device = { .resource = sh_mmcif_resources, }; +/* Camera */ +static int mt9t111_power(struct device *dev, int mode) +{ + struct clk *mclk = clk_get(NULL, "video1"); + + if (IS_ERR(mclk)) { + dev_err(dev, "can't get video1 clock\n"); + return -EINVAL; + } + + if (mode) { + /* video1 (= CON1 camera) expect 24MHz */ + clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); + clk_enable(mclk); + gpio_direction_output(GPIO_PORT158, 1); + } else { + gpio_direction_output(GPIO_PORT158, 0); + clk_disable(mclk); + } + + clk_put(mclk); + + return 0; +} + +static struct i2c_board_info i2c_camera_mt9t111 = { + I2C_BOARD_INFO("mt9t112", 0x3d), +}; + +static struct mt9t112_camera_info mt9t111_info = { + .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 }, +}; + +static struct soc_camera_link mt9t111_link = { + .i2c_adapter_id = 0, + .bus_id = 0, + .board_info = &i2c_camera_mt9t111, + .power = mt9t111_power, + .priv = &mt9t111_info, +}; + +static struct platform_device camera_device = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &mt9t111_link, + }, +}; + +/* CEU0 */ +static struct sh_mobile_ceu_info sh_mobile_ceu0_info = { + .flags = SH_CEU_FLAG_LOWER_8BIT, +}; + +static struct resource ceu0_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x0500), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu0_device = { + .name = "sh_mobile_ceu", + .id = 0, + .num_resources = ARRAY_SIZE(ceu0_resources), + .resource = ceu0_resources, + .dev = { + .platform_data = &sh_mobile_ceu0_info, + .coherent_dma_mask = 0xffffffff, + }, +}; + +/* FSI */ +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsib; + int ret; + + /* it support 48KHz only */ + if (48000 != rate) + return -EINVAL; + + fsib = clk_get(dev, "ickb"); + if (IS_ERR(fsib)) + return -EINVAL; + + if (enable) { + ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + clk_enable(fsib); + } else { + ret = 0; + clk_disable(fsib); + } + + clk_put(fsib); + + return ret; +} + +static struct sh_fsi_platform_info fsi_info = { + /* FSI-WM8978 */ + .port_a = { + .tx_id = SHDMA_SLAVE_FSIA_TX, + }, + /* FSI-HDMI */ + .port_b = { + .flags = SH_FSI_FMT_SPDIF | + SH_FSI_ENABLE_STREAM_MODE, + .set_rate = fsi_hdmi_set_rate, + .tx_id = SHDMA_SLAVE_FSIB_TX, + } +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xfe1f0000, + .end = 0xfe1f8400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1840), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +/* FSI-WM8978 */ +static struct asoc_simple_dai_init_info fsi_wm8978_init_info = { + .fmt = SND_SOC_DAIFMT_I2S, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, + .sysclk = 12288000, +}; + +static struct asoc_simple_card_info fsi_wm8978_info = { + .name = "wm8978", + .card = "FSI2A-WM8978", + .cpu_dai = "fsia-dai", + .codec = "wm8978.0-001a", + .platform = "sh_fsi2", + .codec_dai = "wm8978-hifi", + .init = &fsi_wm8978_init_info, +}; + +static struct platform_device fsi_wm8978_device = { + .name = "asoc-simple-card", + .id = 0, + .dev = { + .platform_data = &fsi_wm8978_info, + }, +}; + +/* FSI-HDMI */ +static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { + .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, +}; + +static struct asoc_simple_card_info fsi2_hdmi_info = { + .name = "HDMI", + .card = "FSI2B-HDMI", + .cpu_dai = "fsib-dai", + .codec = "sh-mobile-hdmi", + .platform = "sh_fsi2", + .codec_dai = "sh_mobile_hdmi-hifi", + .init = &fsi2_hdmi_init_info, +}; + +static struct platform_device fsi_hdmi_device = { + .name = "asoc-simple-card", + .id = 1, + .dev = { + .platform_data = &fsi2_hdmi_info, + }, +}; + /* I2C */ static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), .irq = evt2irq(0x0340), }, + { + I2C_BOARD_INFO("wm8978", 0x1a), + }, }; /* @@ -549,6 +897,13 @@ static struct platform_device *eva_devices[] __initdata = { &sh_eth_device, &sdhi0_device, &sh_mmcif_device, + &hdmi_device, + &hdmi_lcdc_device, + &camera_device, + &ceu0_device, + &fsi_device, + &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) @@ -556,10 +911,14 @@ static void __init eva_clock_init(void) struct clk *system = clk_get(NULL, "system_clk"); struct clk *xtal1 = clk_get(NULL, "extal1"); struct clk *usb24s = clk_get(NULL, "usb24s"); + struct clk *fsibck = clk_get(NULL, "fsibck"); + struct clk *fsib = clk_get(&fsi_device.dev, "ickb"); if (IS_ERR(system) || IS_ERR(xtal1) || - IS_ERR(usb24s)) { + IS_ERR(usb24s) || + IS_ERR(fsibck) || + IS_ERR(fsib)) { pr_err("armadillo800eva board clock init failed\n"); goto clock_error; } @@ -570,6 +929,11 @@ static void __init eva_clock_init(void) /* usb24s use extal1 (= system) clock (= 24MHz) */ clk_set_parent(usb24s, system); + /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ + clk_set_parent(fsib, fsibck); + clk_set_rate(fsibck, 12288000); + clk_set_rate(fsib, 12288000); + clock_error: if (!IS_ERR(system)) clk_put(system); @@ -577,16 +941,26 @@ clock_error: clk_put(xtal1); if (!IS_ERR(usb24s)) clk_put(usb24s); + if (!IS_ERR(fsibck)) + clk_put(fsibck); + if (!IS_ERR(fsib)) + clk_put(fsib); } /* * board init */ +#define GPIO_PORT7CR 0xe6050007 +#define GPIO_PORT8CR 0xe6050008 static void __init eva_init(void) { - eva_clock_init(); + struct platform_device *usb = NULL; + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); r8a7740_pinmux_init(); + r8a7740_meram_workaround(); /* SCIFA1 */ gpio_request(GPIO_FN_SCIFA1_RXD, NULL); @@ -667,8 +1041,19 @@ static void __init eva_init(void) /* USB Host */ } else { /* USB Func */ - gpio_request(GPIO_FN_VBUS, NULL); + /* + * A1 chip has 2 IRQ7 pin and it was controled by MSEL register. + * OTOH, usbhs interrupt needs its value (HI/LOW) to decide + * USB connection/disconnection (usbhsf_get_vbus()). + * This means we needs to select GPIO_FN_IRQ7_PORT209 first, + * and select GPIO_PORT209 here + */ + gpio_request(GPIO_FN_IRQ7_PORT209, NULL); + gpio_request(GPIO_PORT209, NULL); + gpio_direction_input(GPIO_PORT209); + platform_device_register(&usbhsf_device); + usb = &usbhsf_device; } /* SDHI0 */ @@ -706,6 +1091,48 @@ static void __init eva_init(void) gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); + /* CEU0 */ + gpio_request(GPIO_FN_VIO0_D7, NULL); + gpio_request(GPIO_FN_VIO0_D6, NULL); + gpio_request(GPIO_FN_VIO0_D5, NULL); + gpio_request(GPIO_FN_VIO0_D4, NULL); + gpio_request(GPIO_FN_VIO0_D3, NULL); + gpio_request(GPIO_FN_VIO0_D2, NULL); + gpio_request(GPIO_FN_VIO0_D1, NULL); + gpio_request(GPIO_FN_VIO0_D0, NULL); + gpio_request(GPIO_FN_VIO0_CLK, NULL); + gpio_request(GPIO_FN_VIO0_HD, NULL); + gpio_request(GPIO_FN_VIO0_VD, NULL); + gpio_request(GPIO_FN_VIO0_FIELD, NULL); + gpio_request(GPIO_FN_VIO_CKO, NULL); + + /* CON1/CON15 Camera */ + gpio_request(GPIO_PORT173, NULL); /* STANDBY */ + gpio_request(GPIO_PORT172, NULL); /* RST */ + gpio_request(GPIO_PORT158, NULL); /* CAM_PON */ + gpio_direction_output(GPIO_PORT173, 0); + gpio_direction_output(GPIO_PORT172, 1); + gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */ + + /* FSI-WM8978 */ + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAOMC, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); + + gpio_request(GPIO_PORT7, NULL); + gpio_request(GPIO_PORT8, NULL); + gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ + + /* FSI-HDMI */ + gpio_request(GPIO_FN_FSIBCK, NULL); + + /* HDMI */ + gpio_request(GPIO_FN_HDMI_HPD, NULL); + gpio_request(GPIO_FN_HDMI_CEC, NULL); + /* * CAUTION * @@ -752,6 +1179,13 @@ static void __init eva_init(void) platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); + + eva_clock_init(); + + rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &lcdc0_device); + rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &hdmi_lcdc_device); + if (usb) + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, usb); } static void __init eva_earlytimer_init(void) diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index e9b32cfbf74..4129008eae2 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -26,6 +26,8 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/videodev2.h> #include <mach/common.h> @@ -75,6 +77,12 @@ * S38.2 = OFF */ +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* * FPGA */ @@ -360,6 +368,8 @@ static void __init bonito_init(void) { u16 val; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + r8a7740_pinmux_init(); bonito_fpga_init(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index f1257321999..fa5dfc5c8ed 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -26,6 +26,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/io.h> #include <linux/input.h> @@ -196,6 +198,15 @@ static struct platform_device keysc_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SDIO_IRQ, @@ -271,26 +282,11 @@ static struct platform_device *g4evm_devices[] __initdata = { #define GPIO_SDHID1_D3 0xe6052106 #define GPIO_SDHICMD1 0xe6052107 -/* - * FIXME !! - * - * gpio_pull_up is quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_pull_up(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xC0; - __raw_writeb(data, addr); -} - static void __init g4evm_init(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + sh7377_pinmux_init(); /* Lit DS14 LED */ @@ -351,11 +347,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID0_3, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_pull_up(GPIO_SDHID0_D0); - gpio_pull_up(GPIO_SDHID0_D1); - gpio_pull_up(GPIO_SDHID0_D2); - gpio_pull_up(GPIO_SDHID0_D3); - gpio_pull_up(GPIO_SDHICMD0); + gpio_request_pullup(GPIO_SDHID0_D0); + gpio_request_pullup(GPIO_SDHID0_D1); + gpio_request_pullup(GPIO_SDHID0_D2); + gpio_request_pullup(GPIO_SDHID0_D3); + gpio_request_pullup(GPIO_SDHICMD0); /* SDHI1 */ gpio_request(GPIO_FN_SDHICLK1, NULL); @@ -364,11 +360,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID1_2, NULL); gpio_request(GPIO_FN_SDHID1_3, NULL); gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_pull_up(GPIO_SDHID1_D0); - gpio_pull_up(GPIO_SDHID1_D1); - gpio_pull_up(GPIO_SDHID1_D2); - gpio_pull_up(GPIO_SDHID1_D3); - gpio_pull_up(GPIO_SDHICMD1); + gpio_request_pullup(GPIO_SDHID1_D0); + gpio_request_pullup(GPIO_SDHID1_D1); + gpio_request_pullup(GPIO_SDHID1_D2); + gpio_request_pullup(GPIO_SDHID1_D3); + gpio_request_pullup(GPIO_SDHICMD1); sh7377_add_standard_devices(); diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index f60f1b281cc..21dbe54304d 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -27,6 +27,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/input.h> @@ -49,6 +51,12 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* SMSC 9220 */ static struct resource smsc9220_resources[] = { [0] = { @@ -288,6 +296,13 @@ static struct platform_device leds_tpu30_device = { .resource = tpu30_resources, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -321,6 +336,15 @@ static struct platform_device mmcif_device = { .resource = mmcif_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SD_HIGHSPEED, @@ -411,6 +435,12 @@ static struct platform_device *kota2_devices[] __initdata = { static void __init kota2_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* SCIFA2 (UART2) */ diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 6a33cf39342..2c986eaae7b 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -21,6 +21,8 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <mach/common.h> #include <mach/emev2.h> @@ -28,6 +30,12 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* Ether */ static struct resource smsc911x_resources[] = { [0] = { @@ -63,6 +71,8 @@ static struct platform_device *kzm9d_devices[] __initdata = { void __init kzm9d_add_standard_devices(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + emev2_add_standard_devices(); platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices)); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index c0ae815e7be..3b8a0171c3c 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -30,9 +30,14 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <linux/videodev2.h> +#include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <mach/irqs.h> #include <mach/sh73a0.h> #include <mach/common.h> @@ -54,6 +59,20 @@ #define GPIO_PCF8575_PORT15 (GPIO_NR + 13) #define GPIO_PCF8575_PORT16 (GPIO_NR + 14) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +/* + * FSI-AK4648 + * + * this command is required when playback. + * + * # amixer set "LINEOUT Mixer DACL" on + */ + /* SMSC 9221 */ static struct resource smsc9221_resources[] = { [0] = { @@ -112,6 +131,151 @@ static struct platform_device usb_host_device = { .resource = usb_resources, }; +/* USB Func CN17 */ +struct usbhs_private { + unsigned int phy; + unsigned int cr2; + struct renesas_usbhs_platform_info info; +}; + +#define IRQ15 intcs_evt2irq(0x03e0) +#define USB_PHY_MODE (1 << 4) +#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) +#define USB_PHY_ON (1 << 1) +#define USB_PHY_OFF (1 << 0) +#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + return !((1 << 7) & __raw_readw(priv->cr2)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->cr2); +} + +static int usbhs_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static irqreturn_t usbhs_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + struct usbhs_private *priv = usbhs_get_priv(pdev); + + renesas_usbhs_call_notify_hotplug(pdev); + + /* clear status */ + __raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy); + + return IRQ_HANDLED; +} + +static int usbhs_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + int ret; + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); + + ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + + /* enable USB phy interrupt */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy); + + return 0; +} + +static void usbhs_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); + + free_irq(IRQ15, pdev); +} + +static u32 usbhs_pipe_cfg[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + +static struct usbhs_private usbhs_private = { + .phy = 0xe60781e0, /* USBPHYINT */ + .cr2 = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs_hardware_init, + .hardware_exit = usbhs_hardware_exit, + .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + .has_otg = 1, + .pipe_type = usbhs_pipe_cfg, + .pipe_size = ARRAY_SIZE(usbhs_pipe_cfg), + }, + }, +}; + +static struct resource usbhs_resources[] = { + [0] = { + .start = 0xE6890000, + .end = 0xE68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(62), + .end = gic_spi(62), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs_device = { + .name = "renesas_usbhs", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbhs_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + /* LCDC */ static struct fb_videomode kzm_lcdc_mode = { .name = "WVGA Panel", @@ -166,6 +330,13 @@ static struct platform_device lcdc_device = { }, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -175,11 +346,11 @@ static struct resource sh_mmcif_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(141), + .start = gic_spi(140), .flags = IORESOURCE_IRQ, }, [2] = { - .start = gic_spi(140), + .start = gic_spi(141), .flags = IORESOURCE_IRQ, }, }; @@ -187,6 +358,8 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_platdata = { .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -200,6 +373,15 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; +/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, @@ -240,6 +422,50 @@ static struct platform_device sdhi0_device = { }, }; +/* Micro SD */ +static struct sh_mobile_sdhi_info sdhi2_info = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | + TMIO_MMC_USE_GPIO_CD | + TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = GPIO_PORT13, +}; + +static struct resource sdhi2_resources[] = { + [0] = { + .name = "SDHI2", + .start = 0xee140000, + .end = 0xee1400ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = gic_spi(103), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = gic_spi(104), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = gic_spi(105), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi2_device = { + .name = "sh_mobile_sdhi", + .id = 2, + .num_resources = ARRAY_SIZE(sdhi2_resources), + .resource = sdhi2_resources, + .dev = { + .platform_data = &sdhi2_info, + }, +}; + /* KEY */ #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } @@ -267,11 +493,74 @@ static struct platform_device gpio_keys_device = { }, }; +/* FSI-AK4648 */ +static struct sh_fsi_platform_info fsi_info = { + .port_a = { + .tx_id = SHDMA_SLAVE_FSI2A_TX, + }, +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xEC230000, + .end = 0xEC230400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(146), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = -1, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, +}; + +static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = { + .fmt = SND_SOC_DAIFMT_LEFT_J, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, + .sysclk = 11289600, +}; + +static struct asoc_simple_card_info fsi2_ak4648_info = { + .name = "AK4648", + .card = "FSI2A-AK4648", + .cpu_dai = "fsia-dai", + .codec = "ak4642-codec.0-0012", + .platform = "sh_fsi2", + .codec_dai = "ak4642-hifi", + .init = &fsi2_ak4648_init_info, +}; + +static struct platform_device fsi_ak4648_device = { + .name = "asoc-simple-card", + .dev = { + .platform_data = &fsi2_ak4648_info, + }, +}; + /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, }; +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4648", 0x12), + }, + { + I2C_BOARD_INFO("r2025sd", 0x32), + } +}; + static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), @@ -289,10 +578,14 @@ static struct i2c_board_info i2c3_devices[] = { static struct platform_device *kzm_devices[] __initdata = { &smsc_device, &usb_host_device, + &usbhs_device, &lcdc_device, &mmc_device, &sdhi0_device, + &sdhi2_device, &gpio_keys_device, + &fsi_device, + &fsi_ak4648_device, }; /* @@ -350,6 +643,12 @@ device_initcall(as3711_enable_lcdc_backlight); static void __init kzm_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 2800000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* enable SCIFA4 */ @@ -427,15 +726,36 @@ static void __init kzm_init(void) gpio_request(GPIO_PORT15, NULL); gpio_direction_output(GPIO_PORT15, 1); /* power */ + /* enable Micro SD */ + gpio_request(GPIO_FN_SDHID2_0, NULL); + gpio_request(GPIO_FN_SDHID2_1, NULL); + gpio_request(GPIO_FN_SDHID2_2, NULL); + gpio_request(GPIO_FN_SDHID2_3, NULL); + gpio_request(GPIO_FN_SDHICMD2, NULL); + gpio_request(GPIO_FN_SDHICLK2, NULL); + gpio_request(GPIO_PORT14, NULL); + gpio_direction_output(GPIO_PORT14, 1); /* power */ + /* I2C 3 */ gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); + /* enable FSI2 port A (ak4648) */ + gpio_request(GPIO_FN_FSIACK, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAISLD, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + + /* enable USB */ + gpio_request(GPIO_FN_VBUS_0, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); #endif + i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices)); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 150122a4463..c129542f6ae 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -41,6 +41,8 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/sh_flctl.h> #include <linux/pm_clock.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> @@ -203,31 +205,32 @@ * amixer set "HPOUTR Mixer DACH" on */ -/* - * FIXME !! - * - * gpio_no_direction - * gpio_pull_down - * are quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_no_direction(u32 addr) +/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = { - __raw_writeb(0x00, addr); -} + /* + * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V + * Since we cannot support both voltages, we support the default 1.8V + */ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; -static void __init gpio_pull_down(u32 addr) +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xA0; + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; - __raw_writeb(data, addr); -} +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; /* MTD */ static struct mtd_partition nor_flash_partitions[] = { @@ -692,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1322,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, @@ -1409,6 +1413,12 @@ static void __init mackerel_init(void) u32 srcr4; struct clk *clk; + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1458,11 +1468,11 @@ static void __init mackerel_init(void) /* USBHS0 */ gpio_request(GPIO_FN_VBUS0_0, NULL); - gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */ /* USBHS1 */ gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); /* enable FSI2 port A (ak4643) */ @@ -1475,8 +1485,8 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); - gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ @@ -1614,20 +1624,20 @@ static void __init mackerel_init(void) platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &hdmi_lcdc_device); + rmobile_add_device_to_domain(&sh7372_pd_a4lc, &meram_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &nand_flash_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device); #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device); #endif - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device); - sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi2_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device); hdmi_init_pm_clock(); sh7372_pm_init(); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 14de3787caf..fcf5a47f477 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -27,6 +27,8 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <mach/hardware.h> #include <mach/r8a7779.h> @@ -37,6 +39,12 @@ #include <asm/hardware/gic.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + /* SMSC LAN89218 */ static struct resource smsc911x_resources[] = { [0] = { @@ -59,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, @@ -73,6 +81,8 @@ static struct platform_device *marzen_devices[] __initdata = { static void __init marzen_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + r8a7779_pinmux_init(); /* SCIF2 (CN18: DEBUG0) */ diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 26eea5f2105..ad5fccc7b5e 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -43,7 +43,10 @@ /* CPG registers */ #define FRQCRA 0xe6150000 #define FRQCRB 0xe6150004 +#define VCLKCR1 0xE6150008 +#define VCLKCR2 0xE615000c #define FRQCRC 0xe61500e0 +#define FSIACKCR 0xe6150018 #define PLLC01CR 0xe6150028 #define SUBCKCR 0xe6150080 @@ -54,6 +57,8 @@ #define MSTPSR2 0xe6150040 #define MSTPSR3 0xe6150048 #define MSTPSR4 0xe615004c +#define FSIBCKCR 0xe6150090 +#define HDMICKCR 0xe6150094 #define SMSTPCR0 0xe6150130 #define SMSTPCR1 0xe6150134 #define SMSTPCR2 0xe6150138 @@ -271,6 +276,13 @@ static struct clk usb24_clk = { .parent = &usb24s_clk, }; +/* External FSIACK/FSIBCK clock */ +static struct clk fsiack_clk = { +}; + +static struct clk fsibck_clk = { +}; + struct clk *main_clks[] = { &extalr_clk, &extal1_clk, @@ -288,6 +300,8 @@ struct clk *main_clks[] = { &pllc1_div2_clk, &usb24s_clk, &usb24_clk, + &fsiack_clk, + &fsibck_clk, }; static void div4_kick(struct clk *clk) @@ -313,6 +327,107 @@ static struct clk_div4_table div4_table = { .kick = div4_kick, }; +/* DIV6 reparent */ +enum { + DIV6_HDMI, + DIV6_VCLK1, DIV6_VCLK2, + DIV6_FSIA, DIV6_FSIB, + DIV6_REPARENT_NR, +}; + +static struct clk *hdmi_parent[] = { + [0] = &pllc1_div2_clk, + [1] = &system_clk, + [2] = &dv_clk +}; + +static struct clk *vclk_parents[8] = { + [0] = &pllc1_div2_clk, + [2] = &dv_clk, + [3] = &usb24s_clk, + [4] = &extal1_div2_clk, + [5] = &extalr_clk, +}; + +static struct clk *fsia_parents[] = { + [0] = &pllc1_div2_clk, + [1] = &fsiack_clk, /* external clock */ +}; + +static struct clk *fsib_parents[] = { + [0] = &pllc1_div2_clk, + [1] = &fsibck_clk, /* external clock */ +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0, + hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2), + [DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0, + vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3), + [DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0, + vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3), + [DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0, + fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2), + [DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0, + fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), +}; + +/* HDMI1/2 clock */ +static unsigned long hdmi12_recalc(struct clk *clk) +{ + u32 val = __raw_readl(HDMICKCR); + int shift = (int)clk->priv; + + val >>= shift; + val &= 0x3; + + return clk->parent->rate / (1 << val); +}; + +static int hdmi12_set_rate(struct clk *clk, unsigned long rate) +{ + u32 val, mask; + int i, shift; + + for (i = 0; i < 3; i++) + if (rate == clk->parent->rate / (1 << i)) + goto find; + return -ENODEV; + +find: + shift = (int)clk->priv; + + val = __raw_readl(HDMICKCR); + mask = ~(0x3 << shift); + val = (val & mask) | i << shift; + __raw_writel(val, HDMICKCR); + + return 0; +}; + +static struct sh_clk_ops hdmi12_clk_ops = { + .recalc = hdmi12_recalc, + .set_rate = hdmi12_set_rate, +}; + +static struct clk hdmi1_clk = { + .ops = &hdmi12_clk_ops, + .priv = (void *)9, + .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */ +}; + +static struct clk hdmi2_clk = { + .ops = &hdmi12_clk_ops, + .priv = (void *)11, + .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */ +}; + +static struct clk *late_main_clks[] = { + &hdmi1_clk, + &hdmi2_clk, +}; + +/* MSTP */ enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, @@ -343,11 +458,12 @@ static struct clk div6_clks[DIV6_NR] = { }; enum { - MSTP125, + MSTP128, MSTP127, MSTP125, MSTP116, MSTP111, MSTP100, MSTP117, MSTP230, MSTP222, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP329, MSTP328, MSTP323, MSTP320, @@ -360,6 +476,8 @@ enum { }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 28, 0), /* CEU21 */ + [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */ [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ @@ -368,6 +486,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */ [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */ + [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ + [MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ + [MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -408,6 +530,12 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("usb24s", &usb24s_clk), + CLKDEV_CON_ID("hdmi1", &hdmi1_clk), + CLKDEV_CON_ID("hdmi2", &hdmi2_clk), + CLKDEV_CON_ID("video1", &div6_reparent_clks[DIV6_VCLK1]), + CLKDEV_CON_ID("video2", &div6_reparent_clks[DIV6_VCLK2]), + CLKDEV_CON_ID("fsiack", &fsiack_clk), + CLKDEV_CON_ID("fsibck", &fsibck_clk), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -430,6 +558,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), + CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), + CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), @@ -438,7 +568,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), - + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), + CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), + CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), @@ -459,6 +592,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]), CLKDEV_ICK_ID("pci", "renesas_usbhs", &div4_clks[DIV4_USBP]), CLKDEV_ICK_ID("usb24", "renesas_usbhs", &usb24_clk), + CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), + + CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), + CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), }; void __init r8a7740_clock_init(u8 md_ck) @@ -495,7 +632,14 @@ void __init r8a7740_clock_init(u8 md_ck) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_div6_reparent_register(div6_reparent_clks, + DIV6_REPARENT_NR); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 7d6e9fe47b5..339c62c824d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -162,7 +162,7 @@ void __init r8a7779_clock_init(void) ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 006e7b5d304..162b791b898 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -344,7 +344,7 @@ void __init sh7367_clock_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 94d1f88246d..5a2894b1c96 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -704,7 +704,7 @@ void __init sh7372_clock_init(void) ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 0798a15936c..85f2a3ec2c4 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -355,7 +355,7 @@ void __init sh7377_clock_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 3946c4ba2aa..7f8da18a858 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, MSTP218, + MSTP219, MSTP218, MSTP217, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, + MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -498,6 +498,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ + [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -507,8 +508,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -553,6 +556,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ + CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -562,8 +566,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ + CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ @@ -612,7 +618,7 @@ void __init sh73a0_clock_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 01e2bc014f1..45e61dada03 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -77,6 +77,7 @@ extern void r8a7779_add_standard_devices(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); +extern void r8a7740_meram_workaround(void); extern unsigned int r8a7779_get_core_count(void); extern int r8a7779_platform_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/include/mach/dma-register.h new file mode 100644 index 00000000000..97c40bd9b94 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/dma-register.h @@ -0,0 +1,84 @@ +/* + * SH-ARM CPU-specific DMA definitions, used by both DMA drivers + * + * Copyright (C) 2012 Renesas Solutions Corp + * + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef DMA_REGISTER_H +#define DMA_REGISTER_H + +/* + * Direct Memory Access Controller + */ + +/* Transmit sizes and respective CHCR register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_64BIT = 7, + XMIT_SZ_128BIT = 3, + XMIT_SZ_256BIT = 4, + XMIT_SZ_512BIT = 5, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +static const unsigned int dma_ts_shift[] = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, + [XMIT_SZ_512BIT] = 6, +}; + +#define TS_LOW_BIT 0x3 /* --xx */ +#define TS_HI_BIT 0xc /* xx-- */ + +#define TS_LOW_SHIFT (3) +#define TS_HI_SHIFT (20 - 2) /* 2 bits for shifted low TS */ + +#define TS_INDEX2VAL(i) \ + ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\ + (((i) & TS_HI_BIT) << TS_HI_SHIFT)) + +#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) +#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) + + +/* + * USB High-Speed DMAC + */ +/* Transmit sizes and respective CHCR register values */ +enum { + USBTS_XMIT_SZ_8BYTE = 0, + USBTS_XMIT_SZ_16BYTE = 1, + USBTS_XMIT_SZ_32BYTE = 2, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +static const unsigned int dma_usbts_shift[] = { + [USBTS_XMIT_SZ_8BYTE] = 3, + [USBTS_XMIT_SZ_16BYTE] = 4, + [USBTS_XMIT_SZ_32BYTE] = 5, +}; + +#define USBTS_LOW_BIT 0x3 /* --xx */ +#define USBTS_HI_BIT 0x0 /* ---- */ + +#define USBTS_LOW_SHIFT 6 +#define USBTS_HI_SHIFT 0 + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +#endif /* DMA_REGISTER_H */ diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index de795b42232..844507d937c 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/sh_pfc.h> +#include <linux/io.h> #ifdef CONFIG_GPIOLIB @@ -27,4 +28,35 @@ static inline int irq_to_gpio(unsigned int irq) #endif /* CONFIG_GPIOLIB */ +/* + * FIXME !! + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static inline void __init gpio_direction_none(u32 addr) +{ + __raw_writeb(0x00, addr); +} + +static inline void __init gpio_request_pullup(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + +static inline void __init gpio_request_pulldown(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xA0; + + __raw_writeb(data, addr); +} + #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h new file mode 100644 index 00000000000..5a402840fe2 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Renesas Solutions Corp. + * + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef PM_RMOBILE_H +#define PM_RMOBILE_H + +#include <linux/pm_domain.h> + +struct platform_device; + +struct rmobile_pm_domain { + struct generic_pm_domain genpd; + struct dev_power_governor *gov; + int (*suspend)(void); + void (*resume)(void); + unsigned int bit_shift; + bool no_debug; +}; + +static inline +struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d) +{ + return container_of(d, struct rmobile_pm_domain, genpd); +} + +#ifdef CONFIG_PM +extern void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd); +extern void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd, + struct platform_device *pdev); +extern void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd, + struct rmobile_pm_domain *rmobile_sd); +#else +#define rmobile_init_pm_domain(pd) do { } while (0) +#define rmobile_add_device_to_domain(pd, pdev) do { } while (0) +#define rmobile_pm_add_subdomain(pd, sd) do { } while (0) +#endif /* CONFIG_PM */ + +#endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index 9d447abb969..7143147780d 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -19,6 +19,8 @@ #ifndef __ASM_R8A7740_H__ #define __ASM_R8A7740_H__ +#include <mach/pm-rmobile.h> + /* * MD_CKx pin */ @@ -139,7 +141,7 @@ enum { GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20, GPIO_FN_DBGMD21, - /* FSI */ + /* FSI-A */ GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */ GPIO_FN_FSIAISLD_PORT5, GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */ @@ -150,6 +152,9 @@ enum { GPIO_FN_FSIACK, GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT, + /* FSI-B */ + GPIO_FN_FSIBCK, + /* FMSI */ GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */ GPIO_FN_FMSISLD_PORT6, @@ -565,6 +570,10 @@ enum { GPIO_FN_RESETP_PULLUP, GPIO_FN_RESETP_PLAIN, + /* HDMI */ + GPIO_FN_HDMI_HPD, + GPIO_FN_HDMI_CEC, + /* SDENC */ GPIO_FN_SDENC_CPG, GPIO_FN_SDENC_DV_CLKI, @@ -581,4 +590,26 @@ enum { GPIO_FN_TRACEAUD_FROM_MEMC, }; +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI1_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI2_RX, + SHDMA_SLAVE_SDHI2_TX, + SHDMA_SLAVE_FSIA_RX, + SHDMA_SLAVE_FSIA_TX, + SHDMA_SLAVE_FSIB_TX, + SHDMA_SLAVE_USBHS_TX, + SHDMA_SLAVE_USBHS_RX, +}; + +#ifdef CONFIG_PM +extern struct rmobile_pm_domain r8a7740_pd_a4s; +extern struct rmobile_pm_domain r8a7740_pd_a3sp; +extern struct rmobile_pm_domain r8a7740_pd_a4lc; +#endif /* CONFIG_PM */ + #endif /* __ASM_R8A7740_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 915d0093da0..b59048e6d8f 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -13,6 +13,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> +#include <mach/pm-rmobile.h> /* * Pin Function Controller: @@ -477,42 +478,16 @@ extern struct clk sh7372_fsibck_clk; extern struct clk sh7372_fsidiva_clk; extern struct clk sh7372_fsidivb_clk; -struct platform_device; - -struct sh7372_pm_domain { - struct generic_pm_domain genpd; - struct dev_power_governor *gov; - int (*suspend)(void); - void (*resume)(void); - unsigned int bit_shift; - bool no_debug; -}; - -static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) -{ - return container_of(d, struct sh7372_pm_domain, genpd); -} - #ifdef CONFIG_PM -extern struct sh7372_pm_domain sh7372_a4lc; -extern struct sh7372_pm_domain sh7372_a4mp; -extern struct sh7372_pm_domain sh7372_d4; -extern struct sh7372_pm_domain sh7372_a4r; -extern struct sh7372_pm_domain sh7372_a3rv; -extern struct sh7372_pm_domain sh7372_a3ri; -extern struct sh7372_pm_domain sh7372_a4s; -extern struct sh7372_pm_domain sh7372_a3sp; -extern struct sh7372_pm_domain sh7372_a3sg; - -extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd); -extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, - struct platform_device *pdev); -extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, - struct sh7372_pm_domain *sh7372_sd); -#else -#define sh7372_init_pm_domain(pd) do { } while(0) -#define sh7372_add_device_to_domain(pd, pdev) do { } while(0) -#define sh7372_pm_add_subdomain(pd, sd) do { } while(0) +extern struct rmobile_pm_domain sh7372_pd_a4lc; +extern struct rmobile_pm_domain sh7372_pd_a4mp; +extern struct rmobile_pm_domain sh7372_pd_d4; +extern struct rmobile_pm_domain sh7372_pd_a4r; +extern struct rmobile_pm_domain sh7372_pd_a3rv; +extern struct rmobile_pm_domain sh7372_pd_a3ri; +extern struct rmobile_pm_domain sh7372_pd_a4s; +extern struct rmobile_pm_domain sh7372_pd_a3sp; +extern struct rmobile_pm_domain sh7372_pd_a3sg; #endif /* CONFIG_PM */ extern void sh7372_intcs_suspend(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 398e2c10913..fe950f25d79 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -516,6 +516,13 @@ enum { SHDMA_SLAVE_SDHI2_RX, SHDMA_SLAVE_MMCIF_TX, SHDMA_SLAVE_MMCIF_RX, + SHDMA_SLAVE_FSI2A_TX, + SHDMA_SLAVE_FSI2A_RX, + SHDMA_SLAVE_FSI2B_TX, + SHDMA_SLAVE_FSI2B_RX, + SHDMA_SLAVE_FSI2C_TX, + SHDMA_SLAVE_FSI2C_RX, + SHDMA_SLAVE_FSI2D_RX, }; /* diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index 09c42afcb22..9a69a31918b 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -71,10 +71,12 @@ enum { DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, + HDMI, USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND, RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, SPU2_0, SPU2_1, FSI, FMSI, + HDMI_SSS, HDMI_KEY, IPMMU, AP_ARM_CTIIRQ, AP_ARM_PMURQ, MFIS2, @@ -182,6 +184,7 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(USBH_EHCI, 0x1580), INTC_VECT(USBH_PME, 0x15A0), INTC_VECT(USBH_BIND, 0x15C0), + INTC_VECT(HDMI, 0x1700), INTC_VECT(RSPI_OVRF, 0x1780), INTC_VECT(RSPI_SPTEF, 0x17A0), INTC_VECT(RSPI_SPRF, 0x17C0), @@ -189,6 +192,8 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(SPU2_1, 0x1820), INTC_VECT(FSI, 0x1840), INTC_VECT(FMSI, 0x1860), + INTC_VECT(HDMI_SSS, 0x18A0), + INTC_VECT(HDMI_KEY, 0x18C0), INTC_VECT(IPMMU, 0x1920), INTC_VECT(AP_ARM_CTIIRQ, 0x1980), INTC_VECT(AP_ARM_PMURQ, 0x19A0), @@ -304,11 +309,11 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { USBH_EHCI, USBH_PME, USBH_BIND, 0 } }, /* IMR3A3 / IMCR3A3 */ { /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8, - { 0, 0, 0, 0, + { HDMI, 0, 0, 0, RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } }, { /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8, { SPU2_0, SPU2_1, FSI, FMSI, - 0, 0, 0, 0 } }, + 0, HDMI_SSS, HDMI_KEY, 0 } }, { /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8, { 0, IPMMU, 0, 0, AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } }, @@ -353,10 +358,10 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = { { 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } }, /* IPRGA3 */ /* IPRHA3 */ - /* IPRIA3 */ + { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { HDMI, 0, 0, 0 } }, { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } }, { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - /* IPRLA3 */ + { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, HDMI_SSS, HDMI_KEY, 0 } }, { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } }, { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c85..588555a67d9 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c index 670fe1869db..ce9e7fa5cc8 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7740.c +++ b/arch/arm/mach-shmobile/pfc-r8a7740.c @@ -169,7 +169,7 @@ enum { DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK, DBGMD21_MARK, - /* FSI */ + /* FSI-A */ FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */ FSIAISLD_PORT5_MARK, FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */ @@ -178,6 +178,9 @@ enum { FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK, FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK, + /* FSI-B */ + FSIBCK_MARK, + /* FMSI */ FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */ FMSISLD_PORT6_MARK, @@ -560,6 +563,9 @@ enum { /* SDENC */ SDENC_CPG_MARK, SDENC_DV_CLKI_MARK, + /* HDMI */ + HDMI_HPD_MARK, HDMI_CEC_MARK, + /* DEBUG */ EDEBGREQ_PULLUP_MARK, /* for JTAG */ EDEBGREQ_PULLDOWN_MARK, @@ -771,6 +777,7 @@ static pinmux_enum_t pinmux_data[] = { /* Port11 */ PINMUX_DATA(FSIACK_MARK, PORT11_FN1), + PINMUX_DATA(FSIBCK_MARK, PORT11_FN2), PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0), /* Port12 */ @@ -1254,7 +1261,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(A21_MARK, PORT120_FN1), PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2), PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0), - PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0), + PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_1), /* Port121 */ PINMUX_DATA(A20_MARK, PORT121_FN1), @@ -1616,13 +1623,15 @@ static pinmux_enum_t pinmux_data[] = { /* Port209 */ PINMUX_DATA(VBUS_MARK, PORT209_FN1), - PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1), + PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_0), /* Port210 */ PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1), + PINMUX_DATA(HDMI_HPD_MARK, PORT210_FN1), /* Port211 */ PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1), + PINMUX_DATA(HDMI_CEC_MARK, PORT211_FN1), /* LCDC select */ PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), @@ -1691,7 +1700,7 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20), GPIO_FN(DBGMD21), - /* FSI */ + /* FSI-A */ GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */ GPIO_FN(FSIAISLD_PORT5), GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */ @@ -1700,6 +1709,9 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC), GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT), + /* FSI-B */ + GPIO_FN(FSIBCK), + /* FMSI */ GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */ GPIO_FN(FMSISLD_PORT6), @@ -2097,6 +2109,10 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(SDENC_CPG), GPIO_FN(SDENC_DV_CLKI), + /* HDMI */ + GPIO_FN(HDMI_HPD), + GPIO_FN(HDMI_CEC), + /* SYSC */ GPIO_FN(RESETP_PULLUP), GPIO_FN(RESETP_PLAIN), diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c new file mode 100644 index 00000000000..893504d012a --- /dev/null +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -0,0 +1,54 @@ +/* + * r8a7740 power management support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/console.h> +#include <mach/pm-rmobile.h> + +#ifdef CONFIG_PM +static int r8a7740_pd_a4s_suspend(void) +{ + /* + * The A4S domain contains the CPU core and therefore it should + * only be turned off if the CPU is in use. + */ + return -EBUSY; +} + +struct rmobile_pm_domain r8a7740_pd_a4s = { + .genpd.name = "A4S", + .bit_shift = 10, + .gov = &pm_domain_always_on_gov, + .no_debug = true, + .suspend = r8a7740_pd_a4s_suspend, +}; + +static int r8a7740_pd_a3sp_suspend(void) +{ + /* + * Serial consoles make use of SCIF hardware located in A3SP, + * keep such power domain on if "no_console_suspend" is set. + */ + return console_suspend_enabled ? 0 : -EBUSY; +} + +struct rmobile_pm_domain r8a7740_pd_a3sp = { + .genpd.name = "A3SP", + .bit_shift = 11, + .gov = &pm_domain_always_on_gov, + .no_debug = true, + .suspend = r8a7740_pd_a3sp_suspend, +}; + +struct rmobile_pm_domain r8a7740_pd_a4lc = { + .genpd.name = "A4LC", + .bit_shift = 1, +}; + +#endif /* CONFIG_PM */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c new file mode 100644 index 00000000000..a8562540f1d --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -0,0 +1,167 @@ +/* + * rmobile power management support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * based on pm-sh7372.c + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pm_clock.h> +#include <asm/io.h> +#include <mach/pm-rmobile.h> + +/* SYSC */ +#define SPDCR 0xe6180008 +#define SWUCR 0xe6180014 +#define PSTR 0xe6180080 + +#define PSTR_RETRIES 100 +#define PSTR_DELAY_US 10 + +#ifdef CONFIG_PM +static int rmobile_pd_power_down(struct generic_pm_domain *genpd) +{ + struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd); + unsigned int mask = 1 << rmobile_pd->bit_shift; + + if (rmobile_pd->suspend) { + int ret = rmobile_pd->suspend(); + + if (ret) + return ret; + } + + if (__raw_readl(PSTR) & mask) { + unsigned int retry_count; + __raw_writel(mask, SPDCR); + + for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SPDCR) & mask)) + break; + cpu_relax(); + } + } + + if (!rmobile_pd->no_debug) + pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", + genpd->name, mask, __raw_readl(PSTR)); + + return 0; +} + +static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd, + bool do_resume) +{ + unsigned int mask = 1 << rmobile_pd->bit_shift; + unsigned int retry_count; + int ret = 0; + + if (__raw_readl(PSTR) & mask) + goto out; + + __raw_writel(mask, SWUCR); + + for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SWUCR) & mask)) + break; + if (retry_count > PSTR_RETRIES) + udelay(PSTR_DELAY_US); + else + cpu_relax(); + } + if (!retry_count) + ret = -EIO; + + if (!rmobile_pd->no_debug) + pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", + rmobile_pd->genpd.name, mask, __raw_readl(PSTR)); + +out: + if (ret == 0 && rmobile_pd->resume && do_resume) + rmobile_pd->resume(); + + return ret; +} + +static int rmobile_pd_power_up(struct generic_pm_domain *genpd) +{ + return __rmobile_pd_power_up(to_rmobile_pd(genpd), true); +} + +static bool rmobile_pd_active_wakeup(struct device *dev) +{ + bool (*active_wakeup)(struct device *dev); + + active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; + return active_wakeup ? active_wakeup(dev) : true; +} + +static int rmobile_pd_stop_dev(struct device *dev) +{ + int (*stop)(struct device *dev); + + stop = dev_gpd_data(dev)->ops.stop; + if (stop) { + int ret = stop(dev); + if (ret) + return ret; + } + return pm_clk_suspend(dev); +} + +static int rmobile_pd_start_dev(struct device *dev) +{ + int (*start)(struct device *dev); + int ret; + + ret = pm_clk_resume(dev); + if (ret) + return ret; + + start = dev_gpd_data(dev)->ops.start; + if (start) + ret = start(dev); + + return ret; +} + +void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) +{ + struct generic_pm_domain *genpd = &rmobile_pd->genpd; + struct dev_power_governor *gov = rmobile_pd->gov; + + pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); + genpd->dev_ops.stop = rmobile_pd_stop_dev; + genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; + genpd->dev_irq_safe = true; + genpd->power_off = rmobile_pd_power_down; + genpd->power_on = rmobile_pd_power_up; + __rmobile_pd_power_up(rmobile_pd, false); +} + +void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + pm_genpd_add_device(&rmobile_pd->genpd, dev); + if (pm_clk_no_clocks(dev)) + pm_clk_add(dev, NULL); +} + +void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd, + struct rmobile_pm_domain *rmobile_sd) +{ + pm_genpd_add_subdomain(&rmobile_pd->genpd, &rmobile_sd->genpd); +} +#endif /* CONFIG_PM */ diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index a3bdb12acde..79203706922 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -26,6 +26,7 @@ #include <asm/suspend.h> #include <mach/common.h> #include <mach/sh7372.h> +#include <mach/pm-rmobile.h> /* DBG */ #define DBGREG1 0xe6100020 @@ -41,13 +42,10 @@ #define PLLC01STPCR 0xe61500c8 /* SYSC */ -#define SPDCR 0xe6180008 -#define SWUCR 0xe6180014 #define SBAR 0xe6180020 #define WUPRMSK 0xe6180028 #define WUPSMSK 0xe618002c #define WUPSMSK2 0xe6180048 -#define PSTR 0xe6180080 #define WUPSFAC 0xe6180098 #define IRQCR 0xe618022c #define IRQCR2 0xe6180238 @@ -71,188 +69,48 @@ /* AP-System Core */ #define APARMBAREA 0xe6f10020 -#define PSTR_RETRIES 100 -#define PSTR_DELAY_US 10 - #ifdef CONFIG_PM -static int pd_power_down(struct generic_pm_domain *genpd) -{ - struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); - unsigned int mask = 1 << sh7372_pd->bit_shift; - - if (sh7372_pd->suspend) { - int ret = sh7372_pd->suspend(); - - if (ret) - return ret; - } - - if (__raw_readl(PSTR) & mask) { - unsigned int retry_count; - - __raw_writel(mask, SPDCR); - - for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SPDCR) & mask)) - break; - cpu_relax(); - } - } - - if (!sh7372_pd->no_debug) - pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", - genpd->name, mask, __raw_readl(PSTR)); - - return 0; -} - -static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume) -{ - unsigned int mask = 1 << sh7372_pd->bit_shift; - unsigned int retry_count; - int ret = 0; - - if (__raw_readl(PSTR) & mask) - goto out; - - __raw_writel(mask, SWUCR); - - for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SWUCR) & mask)) - break; - if (retry_count > PSTR_RETRIES) - udelay(PSTR_DELAY_US); - else - cpu_relax(); - } - if (!retry_count) - ret = -EIO; - - if (!sh7372_pd->no_debug) - pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", - sh7372_pd->genpd.name, mask, __raw_readl(PSTR)); - - out: - if (ret == 0 && sh7372_pd->resume && do_resume) - sh7372_pd->resume(); - - return ret; -} - -static int pd_power_up(struct generic_pm_domain *genpd) -{ - return __pd_power_up(to_sh7372_pd(genpd), true); -} - -static int sh7372_a4r_suspend(void) -{ - sh7372_intcs_suspend(); - __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ - return 0; -} - -static bool pd_active_wakeup(struct device *dev) -{ - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int sh7372_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int sh7372_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; -} - -void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) -{ - struct generic_pm_domain *genpd = &sh7372_pd->genpd; - struct dev_power_governor *gov = sh7372_pd->gov; - - pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = sh7372_stop_dev; - genpd->dev_ops.start = sh7372_start_dev; - genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->dev_irq_safe = true; - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - __pd_power_up(sh7372_pd, false); -} - -void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, - struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_genpd_add_device(&sh7372_pd->genpd, dev); - if (pm_clk_no_clocks(dev)) - pm_clk_add(dev, NULL); -} - -void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, - struct sh7372_pm_domain *sh7372_sd) -{ - pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd); -} - -struct sh7372_pm_domain sh7372_a4lc = { +struct rmobile_pm_domain sh7372_pd_a4lc = { .genpd.name = "A4LC", .bit_shift = 1, }; -struct sh7372_pm_domain sh7372_a4mp = { +struct rmobile_pm_domain sh7372_pd_a4mp = { .genpd.name = "A4MP", .bit_shift = 2, }; -struct sh7372_pm_domain sh7372_d4 = { +struct rmobile_pm_domain sh7372_pd_d4 = { .genpd.name = "D4", .bit_shift = 3, }; -struct sh7372_pm_domain sh7372_a4r = { +static int sh7372_a4r_pd_suspend(void) +{ + sh7372_intcs_suspend(); + __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ + return 0; +} + +struct rmobile_pm_domain sh7372_pd_a4r = { .genpd.name = "A4R", .bit_shift = 5, - .suspend = sh7372_a4r_suspend, + .suspend = sh7372_a4r_pd_suspend, .resume = sh7372_intcs_resume, }; -struct sh7372_pm_domain sh7372_a3rv = { +struct rmobile_pm_domain sh7372_pd_a3rv = { .genpd.name = "A3RV", .bit_shift = 6, }; -struct sh7372_pm_domain sh7372_a3ri = { +struct rmobile_pm_domain sh7372_pd_a3ri = { .genpd.name = "A3RI", .bit_shift = 8, }; -static int sh7372_a4s_suspend(void) +static int sh7372_pd_a4s_suspend(void) { /* * The A4S domain contains the CPU core and therefore it should @@ -261,15 +119,15 @@ static int sh7372_a4s_suspend(void) return -EBUSY; } -struct sh7372_pm_domain sh7372_a4s = { +struct rmobile_pm_domain sh7372_pd_a4s = { .genpd.name = "A4S", .bit_shift = 10, .gov = &pm_domain_always_on_gov, .no_debug = true, - .suspend = sh7372_a4s_suspend, + .suspend = sh7372_pd_a4s_suspend, }; -static int sh7372_a3sp_suspend(void) +static int sh7372_a3sp_pd_suspend(void) { /* * Serial consoles make use of SCIF hardware located in A3SP, @@ -278,32 +136,22 @@ static int sh7372_a3sp_suspend(void) return console_suspend_enabled ? 0 : -EBUSY; } -struct sh7372_pm_domain sh7372_a3sp = { +struct rmobile_pm_domain sh7372_pd_a3sp = { .genpd.name = "A3SP", .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, - .suspend = sh7372_a3sp_suspend, + .suspend = sh7372_a3sp_pd_suspend, }; -struct sh7372_pm_domain sh7372_a3sg = { +struct rmobile_pm_domain sh7372_pd_a3sg = { .genpd.name = "A3SG", .bit_shift = 13, }; -#else /* !CONFIG_PM */ - -static inline void sh7372_a3sp_init(void) {} - -#endif /* !CONFIG_PM */ +#endif /* CONFIG_PM */ #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) -static int sh7372_do_idle_core_standby(unsigned long unused) -{ - cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ - return 0; -} - static void sh7372_set_reset_vector(unsigned long address) { /* set reset vector, translate 4k */ @@ -311,21 +159,6 @@ static void sh7372_set_reset_vector(unsigned long address) __raw_writel(0, APARMBAREA); } -static void sh7372_enter_core_standby(void) -{ - sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); - - /* enter sleep mode with SYSTBCR to 0x10 */ - __raw_writel(0x10, SYSTBCR); - cpu_suspend(0, sh7372_do_idle_core_standby); - __raw_writel(0, SYSTBCR); - - /* disable reset vector translation */ - __raw_writel(0, SBAR); -} -#endif - -#ifdef CONFIG_SUSPEND static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode) { if (pllc0_on) @@ -465,22 +298,42 @@ static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2) static void sh7372_enter_a3sm_common(int pllc0_on) { + /* use INTCA together with SYSC for wakeup */ + sh7372_setup_sysc(1 << 0, 0); sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); sh7372_enter_sysc(pllc0_on, 1 << 12); } +#endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */ -static void sh7372_enter_a4s_common(int pllc0_on) +#ifdef CONFIG_CPU_IDLE +static int sh7372_do_idle_core_standby(unsigned long unused) { - sh7372_intca_suspend(); - memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); - sh7372_set_reset_vector(SMFRAM); - sh7372_enter_sysc(pllc0_on, 1 << 10); - sh7372_intca_resume(); + cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ + return 0; } -#endif +static void sh7372_enter_core_standby(void) +{ + sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); -#ifdef CONFIG_CPU_IDLE + /* enter sleep mode with SYSTBCR to 0x10 */ + __raw_writel(0x10, SYSTBCR); + cpu_suspend(0, sh7372_do_idle_core_standby); + __raw_writel(0, SYSTBCR); + + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} + +static void sh7372_enter_a3sm_pll_on(void) +{ + sh7372_enter_a3sm_common(1); +} + +static void sh7372_enter_a3sm_pll_off(void) +{ + sh7372_enter_a3sm_common(0); +} static void sh7372_cpuidle_setup(struct cpuidle_driver *drv) { @@ -492,7 +345,24 @@ static void sh7372_cpuidle_setup(struct cpuidle_driver *drv) state->target_residency = 20 + 10; state->flags = CPUIDLE_FLAG_TIME_VALID; shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby; + drv->state_count++; + + state = &drv->states[drv->state_count]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C3"); + strncpy(state->desc, "A3SM PLL ON", CPUIDLE_DESC_LEN); + state->exit_latency = 20; + state->target_residency = 30 + 20; + state->flags = CPUIDLE_FLAG_TIME_VALID; + shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_on; + drv->state_count++; + state = &drv->states[drv->state_count]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C4"); + strncpy(state->desc, "A3SM PLL OFF", CPUIDLE_DESC_LEN); + state->exit_latency = 120; + state->target_residency = 30 + 120; + state->flags = CPUIDLE_FLAG_TIME_VALID; + shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_off; drv->state_count++; } @@ -505,6 +375,14 @@ static void sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND +static void sh7372_enter_a4s_common(int pllc0_on) +{ + sh7372_intca_suspend(); + memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); + sh7372_set_reset_vector(SMFRAM); + sh7372_enter_sysc(pllc0_on, 1 << 10); + sh7372_intca_resume(); +} static int sh7372_enter_suspend(suspend_state_t suspend_state) { @@ -512,24 +390,21 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state) /* check active clocks to determine potential wakeup sources */ if (sh7372_sysc_valid(&msk, &msk2)) { - /* convert INTC mask and sense to SYSC mask and sense */ - sh7372_setup_sysc(msk, msk2); - if (!console_suspend_enabled && - sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) { + sh7372_pd_a4s.genpd.status == GPD_STATE_POWER_OFF) { + /* convert INTC mask/sense to SYSC mask/sense */ + sh7372_setup_sysc(msk, msk2); + /* enter A4S sleep with PLLC0 off */ pr_debug("entering A4S\n"); sh7372_enter_a4s_common(0); - } else { - /* enter A3SM sleep with PLLC0 off */ - pr_debug("entering A3SM\n"); - sh7372_enter_a3sm_common(0); + return 0; } - } else { - /* default to Core Standby that supports all wakeup sources */ - pr_debug("entering Core Standby\n"); - sh7372_enter_core_standby(); } + + /* default to enter A3SM sleep with PLLC0 off */ + pr_debug("entering A3SM\n"); + sh7372_enter_a3sm_common(0); return 0; } @@ -550,7 +425,7 @@ static int sh7372_pm_notifier_fn(struct notifier_block *notifier, * executed during system suspend and resume, respectively, so * that those functions don't crash while accessing the INTCS. */ - pm_genpd_poweron(&sh7372_a4r.genpd); + pm_genpd_poweron(&sh7372_pd_a4r.genpd); break; case PM_POST_SUSPEND: pm_genpd_poweroff_unused(); diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index ec4eb49c169..78948a9dba0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -23,9 +23,14 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> +#include <linux/dma-mapping.h> +#include <mach/dma-register.h> #include <mach/r8a7740.h> +#include <mach/pm-rmobile.h> #include <mach/common.h> #include <mach/irqs.h> #include <asm/mach-types.h> @@ -276,6 +281,272 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &cmt10_device, }; +/* DMA */ +static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = { + { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0xe6850030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0xe6850030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_TX, + .addr = 0xe6860030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc9, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_RX, + .addr = 0xe6860030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xca, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_TX, + .addr = 0xe6870030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xcd, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_RX, + .addr = 0xe6870030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xce, + }, { + .slave_id = SHDMA_SLAVE_FSIA_TX, + .addr = 0xfe1f0024, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xb1, + }, { + .slave_id = SHDMA_SLAVE_FSIA_RX, + .addr = 0xfe1f0020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xb2, + }, { + .slave_id = SHDMA_SLAVE_FSIB_TX, + .addr = 0xfe1f0064, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xb5, + }, +}; + +#define DMA_CHANNEL(a, b, c) \ +{ \ + .offset = a, \ + .dmars = b, \ + .dmars_bit = c, \ + .chclr_offset = (0x220 - 0x20) + a \ +} + +static const struct sh_dmae_channel r8a7740_dmae_channels[] = { + DMA_CHANNEL(0x00, 0, 0), + DMA_CHANNEL(0x10, 0, 8), + DMA_CHANNEL(0x20, 4, 0), + DMA_CHANNEL(0x30, 4, 8), + DMA_CHANNEL(0x50, 8, 0), + DMA_CHANNEL(0x60, 8, 8), +}; + +static struct sh_dmae_pdata dma_platform_data = { + .slave = r8a7740_dmae_slaves, + .slave_num = ARRAY_SIZE(r8a7740_dmae_slaves), + .channel = r8a7740_dmae_channels, + .channel_num = ARRAY_SIZE(r8a7740_dmae_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe008020, + .end = 0xfe00828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe009000, + .end = 0xfe00900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x20c0), + .end = evt2irq(0x20c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2000), + .end = evt2irq(0x20a0), + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe018020, + .end = 0xfe01828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe019000, + .end = 0xfe01900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x21c0), + .end = evt2irq(0x21c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2100), + .end = evt2irq(0x21a0), + .flags = IORESOURCE_IRQ, + }, +}; + +/* Resource order important! */ +static struct resource r8a7740_dmae2_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xfe028020, + .end = 0xfe02828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xfe029000, + .end = 0xfe02900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = evt2irq(0x22c0), + .end = evt2irq(0x22c0), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = evt2irq(0x2200), + .end = evt2irq(0x22a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dma0_device = { + .name = "sh-dma-engine", + .id = 0, + .resource = r8a7740_dmae0_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae0_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma1_device = { + .name = "sh-dma-engine", + .id = 1, + .resource = r8a7740_dmae1_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae1_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +static struct platform_device dma2_device = { + .name = "sh-dma-engine", + .id = 2, + .resource = r8a7740_dmae2_resources, + .num_resources = ARRAY_SIZE(r8a7740_dmae2_resources), + .dev = { + .platform_data = &dma_platform_data, + }, +}; + +/* USB-DMAC */ +static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USBHS_TX, + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USBHS_RX, + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma_platform_data = { + .slave = r8a7740_usb_dma_slaves, + .slave_num = ARRAY_SIZE(r8a7740_usb_dma_slaves), + .channel = r8a7740_usb_dma_channels, + .channel_num = ARRAY_SIZE(r8a7740_usb_dma_channels), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, + .slave_only = 1, +}; + +static struct resource r8a7740_usb_dma_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = r8a7740_usb_dma_resources, + .num_resources = ARRAY_SIZE(r8a7740_usb_dma_resources), + .dev = { + .platform_data = &usb_dma_platform_data, + }, +}; + /* I2C */ static struct resource i2c0_resources[] = { [0] = { @@ -322,8 +593,30 @@ static struct platform_device i2c1_device = { static struct platform_device *r8a7740_late_devices[] __initdata = { &i2c0_device, &i2c1_device, + &dma0_device, + &dma1_device, + &dma2_device, + &usb_dma_device, }; +/* + * r8a7740 chip has lasting errata on MERAM buffer. + * this is work-around for it. + * see + * "Media RAM (MERAM)" on r8a7740 documentation + */ +#define MEBUFCNTR 0xFE950098 +void r8a7740_meram_workaround(void) +{ + void __iomem *reg; + + reg = ioremap_nocache(MEBUFCNTR, 4); + if (reg) { + iowrite32(0x01600164, reg); + iounmap(reg); + } +} + #define ICCR 0x0004 #define ICSTART 0x0070 @@ -380,10 +673,31 @@ void __init r8a7740_add_standard_devices(void) r8a7740_i2c_workaround(&i2c0_device); r8a7740_i2c_workaround(&i2c1_device); + /* PM domain */ + rmobile_init_pm_domain(&r8a7740_pd_a4s); + rmobile_init_pm_domain(&r8a7740_pd_a3sp); + rmobile_init_pm_domain(&r8a7740_pd_a4lc); + + rmobile_pm_add_subdomain(&r8a7740_pd_a4s, &r8a7740_pd_a3sp); + + /* add devices */ platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); platform_add_devices(r8a7740_late_devices, ARRAY_SIZE(r8a7740_late_devices)); + + /* add devices to PM domain */ + + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif0_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif1_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif2_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif3_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif4_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif5_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif6_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif7_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scifb_device); + rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &i2c1_device); } static void __init r8a7740_earlytimer_init(void) @@ -403,3 +717,49 @@ void __init r8a7740_add_early_devices(void) /* override timer setup with soc-specific code */ shmobile_timer.init = r8a7740_earlytimer_init; } + +#ifdef CONFIG_USE_OF + +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { + { } +}; + +void __init r8a7740_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7740_clock_init(0); + + platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + of_platform_populate(NULL, of_default_bus_match_table, + r8a7740_auxdata_lookup, NULL); +} + +static const char *r8a7740_boards_compat_dt[] __initdata = { + "renesas,r8a7740", + NULL, +}; + +DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)") + .map_io = r8a7740_map_io, + .init_early = r8a7740_add_early_devices_dt, + .init_irq = r8a7740_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = r8a7740_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = r8a7740_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index fafce9ce821..838a87be1d5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -33,6 +33,7 @@ #include <linux/sh_timer.h> #include <linux/pm_domain.h> #include <linux/dma-mapping.h> +#include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/sh7372.h> @@ -335,151 +336,126 @@ static struct platform_device iic1_device = { }; /* DMA */ -/* Transmit sizes and respective CHCR register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_64BIT = 7, - XMIT_SZ_128BIT = 3, - XMIT_SZ_256BIT = 4, - XMIT_SZ_512BIT = 5, -}; - -/* log2(size / 8) - used to calculate number of transfers */ -#define TS_SHIFT { \ - [XMIT_SZ_8BIT] = 0, \ - [XMIT_SZ_16BIT] = 1, \ - [XMIT_SZ_32BIT] = 2, \ - [XMIT_SZ_64BIT] = 3, \ - [XMIT_SZ_128BIT] = 4, \ - [XMIT_SZ_256BIT] = 5, \ - [XMIT_SZ_512BIT] = 6, \ -} - -#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \ - (((i) & 0xc) << (20 - 2))) - static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, .addr = 0xe6c40020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_SCIF0_RX, .addr = 0xe6c40024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_SCIF1_TX, .addr = 0xe6c50020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x25, }, { .slave_id = SHDMA_SLAVE_SCIF1_RX, .addr = 0xe6c50024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x26, }, { .slave_id = SHDMA_SLAVE_SCIF2_TX, .addr = 0xe6c60020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0xe6c60024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_SCIF3_TX, .addr = 0xe6c70020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x2d, }, { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0xe6c70024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x2e, }, { .slave_id = SHDMA_SLAVE_SCIF4_TX, .addr = 0xe6c80020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x39, }, { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0xe6c80024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3a, }, { .slave_id = SHDMA_SLAVE_SCIF5_TX, .addr = 0xe6cb0020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x35, }, { .slave_id = SHDMA_SLAVE_SCIF5_RX, .addr = 0xe6cb0024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x36, }, { .slave_id = SHDMA_SLAVE_SCIF6_TX, .addr = 0xe6c30040, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_TX(XMIT_SZ_8BIT), .mid_rid = 0x3d, }, { .slave_id = SHDMA_SLAVE_SCIF6_RX, .addr = 0xe6c30060, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3e, }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0xe6850030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xc1, }, { .slave_id = SHDMA_SLAVE_SDHI0_RX, .addr = 0xe6850030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xc2, }, { .slave_id = SHDMA_SLAVE_SDHI1_TX, .addr = 0xe6860030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xc9, }, { .slave_id = SHDMA_SLAVE_SDHI1_RX, .addr = 0xe6860030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xca, }, { .slave_id = SHDMA_SLAVE_SDHI2_TX, .addr = 0xe6870030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_TX(XMIT_SZ_16BIT), .mid_rid = 0xcd, }, { .slave_id = SHDMA_SLAVE_SDHI2_RX, .addr = 0xe6870030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = CHCR_RX(XMIT_SZ_16BIT), .mid_rid = 0xce, }, { .slave_id = SHDMA_SLAVE_FSIA_TX, .addr = 0xfe1f0024, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xb1, }, { .slave_id = SHDMA_SLAVE_FSIA_RX, .addr = 0xfe1f0020, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_RX(XMIT_SZ_32BIT), .mid_rid = 0xb2, }, { .slave_id = SHDMA_SLAVE_MMCIF_TX, .addr = 0xe6bd0034, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xd1, }, { .slave_id = SHDMA_SLAVE_MMCIF_RX, .addr = 0xe6bd0034, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = CHCR_RX(XMIT_SZ_32BIT), .mid_rid = 0xd2, }, }; @@ -520,19 +496,17 @@ static const struct sh_dmae_channel sh7372_dmae_channels[] = { } }; -static const unsigned int ts_shift[] = TS_SHIFT; - static struct sh_dmae_pdata dma_platform_data = { .slave = sh7372_dmae_slaves, .slave_num = ARRAY_SIZE(sh7372_dmae_slaves), .channel = sh7372_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_dmae_channels), - .ts_low_shift = 3, - .ts_low_mask = 0x18, - .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ - .ts_high_mask = 0x00300000, - .ts_shift = ts_shift, - .ts_shift_num = ARRAY_SIZE(ts_shift), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), .dmaor_init = DMAOR_DME, .chclr_present = 1, }; @@ -654,17 +628,6 @@ static struct platform_device dma2_device = { /* * USB-DMAC */ - -unsigned int usbts_shift[] = {3, 4, 5}; - -enum { - XMIT_SZ_8BYTE = 0, - XMIT_SZ_16BYTE = 1, - XMIT_SZ_32BYTE = 2, -}; - -#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) - static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { { .offset = 0, @@ -677,10 +640,10 @@ static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { { .slave_id = SHDMA_SLAVE_USB0_TX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, { .slave_id = SHDMA_SLAVE_USB0_RX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, }; @@ -689,12 +652,12 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), .channel = sh7372_usb_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = 6, - .ts_low_mask = 0xc0, - .ts_high_shift = 0, - .ts_high_mask = 0, - .ts_shift = usbts_shift, - .ts_shift_num = ARRAY_SIZE(usbts_shift), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), .dmaor_init = DMAOR_DME, .chcr_offset = 0x14, .chcr_ie_bit = 1 << 5, @@ -739,10 +702,10 @@ static struct platform_device usb_dma0_device = { static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_USB1_TX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, { .slave_id = SHDMA_SLAVE_USB1_RX, - .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), }, }; @@ -751,12 +714,12 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), .channel = sh7372_usb_dmae_channels, .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = 6, - .ts_low_mask = 0xc0, - .ts_high_shift = 0, - .ts_high_mask = 0, - .ts_shift = usbts_shift, - .ts_shift_num = ARRAY_SIZE(usbts_shift), + .ts_low_shift = USBTS_LOW_SHIFT, + .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, + .ts_high_shift = USBTS_HI_SHIFT, + .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, + .ts_shift = dma_usbts_shift, + .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), .dmaor_init = DMAOR_DME, .chcr_offset = 0x14, .chcr_ie_bit = 1 << 5, @@ -1038,21 +1001,21 @@ static struct platform_device *sh7372_late_devices[] __initdata = { void __init sh7372_add_standard_devices(void) { - sh7372_init_pm_domain(&sh7372_a4lc); - sh7372_init_pm_domain(&sh7372_a4mp); - sh7372_init_pm_domain(&sh7372_d4); - sh7372_init_pm_domain(&sh7372_a4r); - sh7372_init_pm_domain(&sh7372_a3rv); - sh7372_init_pm_domain(&sh7372_a3ri); - sh7372_init_pm_domain(&sh7372_a4s); - sh7372_init_pm_domain(&sh7372_a3sp); - sh7372_init_pm_domain(&sh7372_a3sg); - - sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv); - sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc); - - sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg); - sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp); + rmobile_init_pm_domain(&sh7372_pd_a4lc); + rmobile_init_pm_domain(&sh7372_pd_a4mp); + rmobile_init_pm_domain(&sh7372_pd_d4); + rmobile_init_pm_domain(&sh7372_pd_a4r); + rmobile_init_pm_domain(&sh7372_pd_a3rv); + rmobile_init_pm_domain(&sh7372_pd_a3ri); + rmobile_init_pm_domain(&sh7372_pd_a4s); + rmobile_init_pm_domain(&sh7372_pd_a3sp); + rmobile_init_pm_domain(&sh7372_pd_a3sg); + + rmobile_pm_add_subdomain(&sh7372_pd_a4lc, &sh7372_pd_a3rv); + rmobile_pm_add_subdomain(&sh7372_pd_a4r, &sh7372_pd_a4lc); + + rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sg); + rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sp); platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); @@ -1060,30 +1023,30 @@ void __init sh7372_add_standard_devices(void) platform_add_devices(sh7372_late_devices, ARRAY_SIZE(sh7372_late_devices)); - sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); - sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); - sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); - sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device); - sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device); + rmobile_add_device_to_domain(&sh7372_pd_a3rv, &vpu_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif2_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif3_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif4_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif5_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif6_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &iic1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma1_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma2_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma0_device); + rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &iic0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu0_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu1_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu2_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu3_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &jpu_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu00_device); + rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu01_device); } static void __init sh7372_earlytimer_init(void) diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index d576a6abbad..855b1506caf 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> @@ -500,3 +501,49 @@ void __init sh7377_add_early_devices(void) /* override timer setup with soc-specific code */ shmobile_timer.init = sh7377_earlytimer_init; } + +#ifdef CONFIG_USE_OF + +void __init sh7377_add_early_devices_dt(void) +{ + shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */ + + early_platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = { + { } +}; + +void __init sh7377_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + sh7377_clock_init(); + + platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); + + of_platform_populate(NULL, of_default_bus_match_table, + sh7377_auxdata_lookup, NULL); +} + +static const char *sh7377_boards_compat_dt[] __initdata = { + "renesas,sh7377", + NULL, +}; + +DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)") + .map_io = sh7377_map_io, + .init_early = sh7377_add_early_devices_dt, + .init_irq = sh7377_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = sh7377_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = sh7377_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 04a0dfe7549..d230af656fc 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -30,6 +30,7 @@ #include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/sh73a0.h> @@ -415,32 +416,6 @@ static struct platform_device i2c4_device = { .num_resources = ARRAY_SIZE(i2c4_resources), }; -/* Transmit sizes and respective CHCR register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_64BIT = 7, - XMIT_SZ_128BIT = 3, - XMIT_SZ_256BIT = 4, - XMIT_SZ_512BIT = 5, -}; - -/* log2(size / 8) - used to calculate number of transfers */ -#define TS_SHIFT { \ - [XMIT_SZ_8BIT] = 0, \ - [XMIT_SZ_16BIT] = 1, \ - [XMIT_SZ_32BIT] = 2, \ - [XMIT_SZ_64BIT] = 3, \ - [XMIT_SZ_128BIT] = 4, \ - [XMIT_SZ_256BIT] = 5, \ - [XMIT_SZ_512BIT] = 6, \ -} - -#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | (((i) & 0xc) << (20 - 2))) -#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) -#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) - static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, @@ -604,19 +579,17 @@ static const struct sh_dmae_channel sh73a0_dmae_channels[] = { DMAE_CHANNEL(0x8980), }; -static const unsigned int ts_shift[] = TS_SHIFT; - static struct sh_dmae_pdata sh73a0_dmae_platform_data = { .slave = sh73a0_dmae_slaves, .slave_num = ARRAY_SIZE(sh73a0_dmae_slaves), .channel = sh73a0_dmae_channels, .channel_num = ARRAY_SIZE(sh73a0_dmae_channels), - .ts_low_shift = 3, - .ts_low_mask = 0x18, - .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ - .ts_high_mask = 0x00300000, - .ts_shift = ts_shift, - .ts_shift_num = ARRAY_SIZE(ts_shift), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), .dmaor_init = DMAOR_DME, }; @@ -651,6 +624,116 @@ static struct platform_device dma0_device = { }, }; +/* MPDMAC */ +static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_FSI2A_RX, + .addr = 0xec230020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd6, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2A_TX, + .addr = 0xec230024, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd5, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2C_RX, + .addr = 0xec230060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xda, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2C_TX, + .addr = 0xec230064, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd9, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2B_RX, + .addr = 0xec240020, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x8e, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2B_TX, + .addr = 0xec240024, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x8d, /* CHECK ME */ + }, { + .slave_id = SHDMA_SLAVE_FSI2D_RX, + .addr = 0xec240060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x9a, /* CHECK ME */ + }, +}; + +#define MPDMA_CHANNEL(a, b, c) \ +{ \ + .offset = a, \ + .dmars = b, \ + .dmars_bit = c, \ + .chclr_offset = (0x220 - 0x20) + a \ +} + +static const struct sh_dmae_channel sh73a0_mpdma_channels[] = { + MPDMA_CHANNEL(0x00, 0, 0), + MPDMA_CHANNEL(0x10, 0, 8), + MPDMA_CHANNEL(0x20, 4, 0), + MPDMA_CHANNEL(0x30, 4, 8), + MPDMA_CHANNEL(0x50, 8, 0), + MPDMA_CHANNEL(0x70, 8, 8), +}; + +static struct sh_dmae_pdata sh73a0_mpdma_platform_data = { + .slave = sh73a0_mpdma_slaves, + .slave_num = ARRAY_SIZE(sh73a0_mpdma_slaves), + .channel = sh73a0_mpdma_channels, + .channel_num = ARRAY_SIZE(sh73a0_mpdma_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, +}; + +/* Resource order important! */ +static struct resource sh73a0_mpdma_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xec618020, + .end = 0xec61828f, + .flags = IORESOURCE_MEM, + }, + { + /* DMARSx */ + .start = 0xec619000, + .end = 0xec61900b, + .flags = IORESOURCE_MEM, + }, + { + .name = "error_irq", + .start = gic_spi(181), + .end = gic_spi(181), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-5 */ + .start = gic_spi(175), + .end = gic_spi(180), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mpdma0_device = { + .name = "sh-dma-engine", + .id = 1, + .resource = sh73a0_mpdma_resources, + .num_resources = ARRAY_SIZE(sh73a0_mpdma_resources), + .dev = { + .platform_data = &sh73a0_mpdma_platform_data, + }, +}; + static struct platform_device *sh73a0_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -673,6 +756,7 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &i2c3_device, &i2c4_device, &dma0_device, + &mpdma0_device, }; #define SRCR2 0xe61580b0 diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 0f882ecb7d8..6ec30054996 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index bbcf4571d36..1d0e435b904 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 88d483bcd66..fd823c62457 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 66db5f13af8..98144baf888 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 9af67d003c6..5a5a52db252 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = { .min_signal = 0, .max_signal = 0, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_rx", .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp2_rx", .min_signal = 6, .max_signal = 6, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 7, .max_signal = 7, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ext0_rx", .min_signal = 0, .max_signal = 0, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext0_tx", .min_signal = 1, .max_signal = 1, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_rx", .min_signal = 2, .max_signal = 2, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_tx", .min_signal = 3, .max_signal = 3, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_rx", .min_signal = 4, .max_signal = 4, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_tx", .min_signal = 5, .max_signal = 5, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_rx", .min_signal = 6, .max_signal = 6, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_tx", .min_signal = 7, .max_signal = 7, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_rx", .min_signal = 8, .max_signal = 8, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_tx", .min_signal = 9, .max_signal = 9, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_rx", .min_signal = 10, .max_signal = 10, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_tx", .min_signal = 11, .max_signal = 11, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_rx", .min_signal = 12, .max_signal = 12, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_tx", .min_signal = 13, .max_signal = 13, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_rx", .min_signal = 14, .max_signal = 14, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_tx", .min_signal = 15, .max_signal = 15, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; @@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index d0de9c1192f..c0999633a9a 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -64,7 +64,8 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci2_pdata), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", &tegra_ehci3_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), {} }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index ee48214bfd8..53bf60f1158 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -33,6 +33,8 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <mach/iomap.h> + #include "board.h" #include "clock.h" @@ -48,6 +50,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), {} }; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 44dcb2e869b..b7344beec10 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/mfd/tps6586x.h> #include <linux/of.h> #include <linux/of_i2c.h> @@ -34,7 +35,9 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = { }; static struct regulator_init_data ldo0_data = { + .supply_regulator = "vdd_sm2", .constraints = { + .name = "vdd_ldo0", .min_uV = 3300 * 1000, .max_uV = 3300 * 1000, .valid_modes_mask = (REGULATOR_MODE_NORMAL | @@ -48,9 +51,11 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ + .supply_regulator = _supply, \ .constraints = { \ + .name = _name, \ .min_uV = (_minmv)*1000, \ .max_uV = (_maxmv)*1000, \ .valid_modes_mask = (REGULATOR_MODE_NORMAL | \ @@ -58,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, 725, 1500); -HARMONY_REGULATOR_INIT(sm1, 725, 1500); -HARMONY_REGULATOR_INIT(sm2, 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -114,6 +120,9 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fd3a5c382f4..7e47d37aeb0 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o +obj-y := core.o timer.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c deleted file mode 100644 index 5535dd0a78c..00000000000 --- a/arch/arm/mach-u300/clock.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* - * - * arch/arm/mach-u300/clock.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Define clocks in the app platform. - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/debugfs.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/seq_file.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/syscon.h> - -#include "clock.h" - -/* - * TODO: - * - move all handling of the CCR register into this file and create - * a spinlock for the CCR register - * - switch to the clkdevice lookup mechanism that maps clocks to - * device ID:s instead when it becomes available in kernel 2.6.29. - * - implement rate get/set for all clocks that need it. - */ - -/* - * Syscon clock I/O registers lock so clock requests don't collide - * NOTE: this is a local lock only used to lock access to clock and - * reset registers in syscon. - */ -static DEFINE_SPINLOCK(syscon_clkreg_lock); -static DEFINE_SPINLOCK(syscon_resetreg_lock); - -/* - * The clocking hierarchy currently looks like this. - * NOTE: the idea is NOT to show how the clocks are routed on the chip! - * The ideas is to show dependencies, so a clock higher up in the - * hierarchy has to be on in order for another clock to be on. Now, - * both CPU and DMA can actually be on top of the hierarchy, and that - * is not modeled currently. Instead we have the backbone AMBA bus on - * top. This bus cannot be programmed in any way but conceptually it - * needs to be active for the bridges and devices to transport data. - * - * Please be aware that a few clocks are hw controlled, which mean that - * the hw itself can turn on/off or change the rate of the clock when - * needed! - * - * AMBA bus - * | - * +- CPU - * +- FSMC NANDIF NAND Flash interface - * +- SEMI Shared Memory interface - * +- ISP Image Signal Processor (U335 only) - * +- CDS (U335 only) - * +- DMA Direct Memory Access Controller - * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) - * +- APEX - * +- VIDEO_ENC AVE2/3 Video Encoder - * +- XGAM Graphics Accelerator Controller - * +- AHB - * | - * +- ahb:0 AHB Bridge - * | | - * | +- ahb:1 INTCON Interrupt controller - * | +- ahb:3 MSPRO Memory Stick Pro controller - * | +- ahb:4 EMIF External Memory interface - * | - * +- fast:0 FAST bridge - * | | - * | +- fast:1 MMCSD MMC/SD card reader controller - * | +- fast:2 I2S0 PCM I2S channel 0 controller - * | +- fast:3 I2S1 PCM I2S channel 1 controller - * | +- fast:4 I2C0 I2C channel 0 controller - * | +- fast:5 I2C1 I2C channel 1 controller - * | +- fast:6 SPI SPI controller - * | +- fast:7 UART1 Secondary UART (U335 only) - * | - * +- slow:0 SLOW bridge - * | - * +- slow:1 SYSCON (not possible to control) - * +- slow:2 WDOG Watchdog - * +- slow:3 UART0 primary UART - * +- slow:4 TIMER_APP Application timer - used in Linux - * +- slow:5 KEYPAD controller - * +- slow:6 GPIO controller - * +- slow:7 RTC controller - * +- slow:8 BT Bus Tracer (not used currently) - * +- slow:9 EH Event Handler (not used currently) - * +- slow:a TIMER_ACC Access style timer (not used currently) - * +- slow:b PPM (U335 only, what is that?) - */ - -/* - * Reset control functions. We remember if a block has been - * taken out of reset and don't remove the reset assertion again - * and vice versa. Currently we only remove resets so the - * enablement function is defined out. - */ -static void syscon_block_reset_enable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val |= clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = true; -} - -static void syscon_block_reset_disable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val &= ~clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = false; -} - -int __clk_get(struct clk *clk) -{ - u16 val; - - /* The MMC and MSPRO clocks need some special set-up */ - if (!strcmp(clk->name, "MCLK")) { - /* Set default MMC clock divisor to 18.9 MHz */ - writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Disable MSPRO frequency */ - val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - if (!strcmp(clk->name, "MSPRO")) { - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Enable MSPRO frequency */ - val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - return 1; -} -EXPORT_SYMBOL(__clk_get); - -void __clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(__clk_put); - -static void syscon_clk_disable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void syscon_clk_enable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static u16 syscon_clk_get_rate(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); - return val; -} - -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER -static void enable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S0 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void enable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S1 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S1_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S0 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S1 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ - - -static void syscon_clk_rate_set_mclk(unsigned long rate) -{ - u16 val; - u32 reg; - unsigned long iflags; - - switch (rate) { - case 18900000: - val = 0x0054; - break; - case 20800000: - val = 0x0044; - break; - case 23100000: - val = 0x0043; - break; - case 26000000: - val = 0x0033; - break; - case 29700000: - val = 0x0032; - break; - case 34700000: - val = 0x0022; - break; - case 41600000: - val = 0x0021; - break; - case 52000000: - val = 0x0011; - break; - case 104000000: - val = 0x0000; - break; - default: - printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", - rate); - return; - } - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - ~U300_SYSCON_MMF0R_MASK; - writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -void syscon_clk_rate_set_cpuclk(unsigned long rate) -{ - u16 val; - unsigned long iflags; - - switch (rate) { - case 13000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; - break; - case 52000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; - break; - case 104000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; - break; - case 208000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; - break; - default: - return; - } - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & - ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); - -void clk_disable(struct clk *clk) -{ - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount > 0 && !(--clk->usecount)) { - /* some blocks lack clocking registers and cannot be disabled */ - if (clk->disable) - clk->disable(clk); - if (likely((u32)clk->parent)) - clk_disable(clk->parent); - } -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - disable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - disable_i2s1_vcxo(); -#endif - spin_unlock_irqrestore(&clk->lock, iflags); -} -EXPORT_SYMBOL(clk_disable); - -int clk_enable(struct clk *clk) -{ - int ret = 0; - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) - ret = clk_enable(clk->parent); - - if (unlikely(ret != 0)) - clk->usecount--; - else { - /* remove reset line (we never enable reset again) */ - syscon_block_reset_disable(clk); - /* clocks without enable function are always on */ - if (clk->enable) - clk->enable(clk); -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - enable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - enable_i2s1_vcxo(); -#endif - } - } - spin_unlock_irqrestore(&clk->lock, iflags); - return ret; - -} -EXPORT_SYMBOL(clk_enable); - -/* Returns the clock rate in Hz */ -static unsigned long clk_get_rate_cpuclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - return 104000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 208000000; - default: - break; - } - return clk->rate; -} - -static unsigned long clk_get_rate_ahb_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_emif_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 104000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_xgamclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_mclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - /* - * Here, the 208 MHz PLL gets shut down and the always - * on 13 MHz PLL used for RTC etc kicks into use - * instead. - */ - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - { - /* - * This clock is under program control. The register is - * divided in two nybbles, bit 7-4 gives cycles-1 to count - * high, bit 3-0 gives cycles-1 to count low. Distribute - * these with no more than 1 cycle difference between - * low and high and add low and high to get the actual - * divisor. The base PLL is 208 MHz. Writing 0x00 will - * divide by 1 and 1 so the highest frequency possible - * is 104 MHz. - * - * e.g. 0x54 => - * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz - */ - u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - U300_SYSCON_MMF0R_MASK; - switch (val) { - case 0x0054: - return 18900000; - case 0x0044: - return 20800000; - case 0x0043: - return 23100000; - case 0x0033: - return 26000000; - case 0x0032: - return 29700000; - case 0x0022: - return 34700000; - case 0x0021: - return 41600000; - case 0x0011: - return 52000000; - case 0x0000: - return 104000000; - default: - break; - } - } - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 26000000; - default: - break; - } - - return clk->rate; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk->get_rate) - return clk->get_rate(clk); - else - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 18900000) - return 18900000; - if (rate <= 20800000) - return 20800000; - if (rate <= 23100000) - return 23100000; - if (rate <= 26000000) - return 26000000; - if (rate <= 29700000) - return 29700000; - if (rate <= 34700000) - return 34700000; - if (rate <= 41600000) - return 41600000; - if (rate <= 52000000) - return 52000000; - return -EINVAL; -} - -static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 13000000) - return 13000000; - if (rate <= 52000000) - return 52000000; - if (rate <= 104000000) - return 104000000; - if (rate <= 208000000) - return 208000000; - return -EINVAL; -} - -/* - * This adjusts a requested rate to the closest exact rate - * a certain clock can provide. For a fixed clock it's - * mostly clk->rate. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ - /* Else default to fixed value */ - - if (clk->round_rate) { - return (long) clk->round_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to round rate of %s\n", - clk->name); - } - return (long) clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); - return 0; -} - -static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); - return 0; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: set for EMIFCLK and AHBCLK */ - /* Else assume the clock is fixed and fail */ - if (clk->set_rate) { - return clk->set_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", - clk->name, rate); - return -EINVAL; - } -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * Clock definitions. The clock parents are set to respective - * bridge and the clock framework makes sure that the clocks have - * parents activated and are brought out of reset when in use. - * - * Clocks that have hw_ctrld = true are hw controlled, and the hw - * can by itself turn these clocks on and off. - * So in other words, we don't really have to care about them. - */ - -static struct clk amba_clk = { - .name = "AMBA", - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), -}; - -/* - * These blocks are connected directly to the AMBA bus - * with no bridge. - */ - -static struct clk cpu_clk = { - .name = "CPU", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, - .set_rate = clk_set_rate_cpuclk, - .get_rate = clk_get_rate_cpuclk, - .round_rate = clk_round_rate_cpuclk, - .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), -}; - -static struct clk nandif_clk = { - .name = "FSMC", - .parent = &amba_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), -}; - -static struct clk semi_clk = { - .name = "SEMI", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - /* It is not possible to reset SEMI */ - .hw_ctrld = false, - .reset = false, - .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk isp_clk = { - .name = "ISP", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), -}; - -static struct clk cds_clk = { - .name = "CDS", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, - .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), -}; -#endif - -static struct clk dma_clk = { - .name = "DMA", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), -}; - -static struct clk aaif_clk = { - .name = "AAIF", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), -}; - -static struct clk apex_clk = { - .name = "APEX", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), -}; - -static struct clk video_enc_clk = { - .name = "VIDEO_ENC", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = false, - .reset = false, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - /* This has XGAM in the name but refers to the video encoder */ - .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), -}; - -static struct clk xgam_clk = { - .name = "XGAMCLK", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, - .get_rate = clk_get_rate_xgamclk, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), -}; - -/* This clock is used to activate the video encoder */ -static struct clk ahb_clk = { - .name = "AHB", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, /* This one is set to false due to HW bug */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), -}; - - -/* - * Clocks on the AHB bridge - */ - -static struct clk ahb_subsys_clk = { - .name = "AHB_SUBSYS", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), -}; - -static struct clk intcon_clk = { - .name = "INTCON", - .parent = &ahb_subsys_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, - /* INTCON can be reset but not clock-gated */ - .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), - -}; - -static struct clk mspro_clk = { - .name = "MSPRO", - .parent = &ahb_subsys_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), -}; - -static struct clk emif_clk = { - .name = "EMIF", - .parent = &ahb_subsys_clk, - .rate = 104000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_emif_clk, - .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), -}; - - -/* - * Clocks on the FAST bridge - */ -static struct clk fast_clk = { - .name = "FAST_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), -}; - -/* - * The MMCI apb_pclk is hardwired to the same terminal as the - * external MCI clock. Thus this will be referenced twice. - */ -static struct clk mmcsd_clk = { - .name = "MCLK", - .parent = &fast_clk, - .rate = 18900000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, - .get_rate = clk_get_rate_mclk, - .set_rate = clk_set_rate_mclk, - .round_rate = clk_round_rate_mclk, - .disable = syscon_clk_disable, - .enable = syscon_clk_enable, - .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), -}; - -static struct clk i2s0_clk = { - .name = "i2s0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), -}; - -static struct clk i2s1_clk = { - .name = "i2s1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), -}; - -static struct clk i2c0_clk = { - .name = "I2C0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), -}; - -static struct clk i2c1_clk = { - .name = "I2C1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), -}; - -/* - * The SPI apb_pclk is hardwired to the same terminal as the - * external SPI clock. Thus this will be referenced twice. - */ -static struct clk spi_clk = { - .name = "SPI", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk uart1_pclk = { - .name = "UART1_PCLK", - .parent = &fast_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart1_clk = { - .name = "UART1_CLK", - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), -}; -#endif - - -/* - * Clocks on the SLOW bridge - */ -static struct clk slow_clk = { - .name = "SLOW_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, - .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), -}; - -/* TODO: implement SYSCON clock? */ - -static struct clk wdog_clk = { - .name = "WDOG", - .parent = &slow_clk, - .hw_ctrld = false, - .rate = 32768, - .reset = false, - /* This is always on, cannot be enabled/disabled or reset */ - .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), -}; - -static struct clk uart0_pclk = { - .name = "UART0_PCLK", - .parent = &slow_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_UART_RESET_EN, - .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart0_clk = { - .name = "UART0_CLK", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock), -}; - -static struct clk keypad_clk = { - .name = "KEYPAD", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, - .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), -}; - -static struct clk gpio_clk = { - .name = "GPIO", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), -}; - -static struct clk rtc_clk = { - .name = "RTC", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, - /* This clock is always on, cannot be enabled/disabled */ - .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), -}; - -static struct clk bustr_clk = { - .name = "BUSTR", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), -}; - -static struct clk evhist_clk = { - .name = "EVHIST", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_EH_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), -}; - -static struct clk timer_clk = { - .name = "TIMER", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), -}; - -/* - * There is a binary divider in the hardware that divides - * the 13MHz PLL by 13 down to 1 MHz. - */ -static struct clk app_timer_clk = { - .name = "TIMER_APP", - .parent = &slow_clk, - .rate = 1000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk ppm_clk = { - .name = "PPM", - .parent = &slow_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), -}; -#endif - -#define DEF_LOOKUP(devid, clkref) \ - { \ - .dev_id = devid, \ - .clk = clkref, \ - } - -#define DEF_LOOKUP_CON(devid, conid, clkref) \ - { \ - .dev_id = devid, \ - .con_id = conid, \ - .clk = clkref, \ - } - -/* - * Here we only define clocks that are meaningful to - * look up through clockdevice. - */ -static struct clk_lookup lookups[] = { - /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc-nand", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), -#endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("msl", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), - DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), - /* AHB bridge clocks */ - DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), - DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk), - /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), - DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk), - /* - * The .0 and .1 identifiers on these comes from the platform device - * .id field and are assigned when the platform devices are registered. - */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stu300.0", &i2c0_clk), - DEF_LOOKUP("stu300.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), - DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), - DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk), -#endif - /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("coh901327_wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart0_clk), - DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("coh901461-keypad", &keypad_clk), - DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc-coh901331", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), -#endif -}; - -static void __init clk_register(void) -{ - /* Register the lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -/* - * The following makes it possible to view the status (especially - * reference count and reset status) for the clocks in the platform - * by looking into the special file <debugfs>/u300_clocks - */ - -/* A list of all clocks in the platform */ -static struct clk *clks[] = { - /* Top node clock for the AMBA bus */ - &amba_clk, - /* Connected directly to the AMBA bus */ - &cpu_clk, - &nandif_clk, - &semi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &isp_clk, - &cds_clk, -#endif - &dma_clk, - &aaif_clk, - &apex_clk, - &video_enc_clk, - &xgam_clk, - &ahb_clk, - - /* AHB bridge clocks */ - &ahb_subsys_clk, - &intcon_clk, - &mspro_clk, - &emif_clk, - /* FAST bridge clocks */ - &fast_clk, - &mmcsd_clk, - &i2s0_clk, - &i2s1_clk, - &i2c0_clk, - &i2c1_clk, - &spi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &uart1_clk, - &uart1_pclk, -#endif - /* SLOW bridge clocks */ - &slow_clk, - &wdog_clk, - &uart0_clk, - &uart0_pclk, - &app_timer_clk, - &keypad_clk, - &gpio_clk, - &rtc_clk, - &bustr_clk, - &evhist_clk, - &timer_clk, -#ifdef CONFIG_MACH_U300_BS335 - &ppm_clk, -#endif -}; - -static int u300_clocks_show(struct seq_file *s, void *data) -{ - struct clk *clk; - int i; - - seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ - "ACTIVE\tUSERS\tHW CTRL FREQ\n"); - seq_printf(s, "---------------------------------------------" \ - "-----------------------------------------\n"); - for (i = 0; i < ARRAY_SIZE(clks); i++) { - clk = clks[i]; - if (clk != ERR_PTR(-ENOENT)) { - /* Format clock and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", clk->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", clk->dev ? - dev_name(clk->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - if (clk->get_rate || clk->rate != 0) - seq_printf(s, - "%s%s\t%s\t%d\t%s\t%lu Hz\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO ", - clk_get_rate(clk)); - else - seq_printf(s, - "%s%s\t%s\t%d\t%s\t" \ - "(unknown rate)\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO "); - } - } - return 0; -} - -static int u300_clocks_open(struct inode *inode, struct file *file) -{ - return single_open(file, u300_clocks_show, NULL); -} - -static const struct file_operations u300_clocks_operations = { - .open = u300_clocks_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_clk_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, - &u300_clocks_operations); - return 0; -} -/* - * This needs to come in after the core_initcall() for the - * overall clocks, because debugfs is not available until - * the subsystems come up. - */ -module_init(init_clk_read_debugfs); -#endif - -int __init u300_clock_init(void) -{ - u16 val; - - /* - * FIXME: shall all this powermanagement stuff really live here??? - */ - - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); - - /* Power management enable */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); - - clk_register(); - - /* - * Some of these may be on when we boot the system so make sure they - * are turned OFF. - */ - syscon_block_reset_enable(&timer_clk); - timer_clk.disable(&timer_clk); - - /* - * These shall be turned on by default when we boot the system - * so make sure they are ON. (Adding CPU here is a bit too much.) - * These clocks will be claimed by drivers later. - */ - syscon_block_reset_disable(&semi_clk); - syscon_block_reset_disable(&emif_clk); - clk_enable(&semi_clk); - clk_enable(&emif_clk); - - return 0; -} diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h deleted file mode 100644 index 4f50ca8f901..00000000000 --- a/arch/arm/mach-u300/clock.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * Copyright (C) 2007-2009 ST-Ericsson AB - * Adopted to ST-Ericsson U300 platforms by - * Jonas Aaberg <jonas.aberg@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __MACH_CLOCK_H -#define __MACH_CLOCK_H - -#include <linux/clk.h> - -struct clk { - struct list_head node; - struct module *owner; - struct device *dev; - const char *name; - struct clk *parent; - - spinlock_t lock; - unsigned long rate; - bool reset; - __u16 clk_val; - __s8 usecount; - void __iomem * res_reg; - __u16 res_mask; - - bool hw_ctrld; - - void (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long); - unsigned long (*get_rate) (struct clk *); - unsigned long (*round_rate) (struct clk *, unsigned long); - void (*init) (struct clk *); - void (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -int u300_clock_init(void); - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 33339745d43..03acf1883ec 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -30,6 +30,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/clk-u300.h> #include <asm/types.h> #include <asm/setup.h> @@ -44,7 +45,6 @@ #include <mach/dma_channels.h> #include <mach/gpio-u300.h> -#include "clock.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" @@ -1658,12 +1658,20 @@ void __init u300_init_irq(void) int i; /* initialize clocking early, we want to clock the INTCON */ - u300_clock_init(); + u300_clk_init(U300_SYSCON_VBASE); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); /* Clock the interrupt controller */ clk = clk_get_sys("intcon", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); @@ -1811,13 +1819,6 @@ void __init u300_init_devices(void) /* Check what platform we run and print some status information */ u300_init_check_chip(); - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); /* Initialize SPI device with some board specifics */ u300_spi_init(&pl022_device); diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index bc1c7897e82..56ac06d38ec 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -354,7 +354,7 @@ static void __init u300_timer_init(void) /* Clock the interrupt controller */ clk = clk_get_sys("apptimer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); setup_sched_clock(u300_read_sched_clock, 32, rate); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79ca..53d3d46dec1 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 99604803874..df15646036a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 84461fa2a3b..a534d8880de 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -25,6 +26,7 @@ #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> +#include <linux/mfd/abx500/ab8500-codec.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/smsc911x.h> @@ -39,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/gpio-nomadik.h> @@ -97,6 +98,18 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +/* ab8500-codec */ +static struct ab8500_codec_platform_data ab8500_codec_pdata = { + .amics = { + .mic1_type = AMIC_TYPE_DIFFERENTIAL, + .mic2_type = AMIC_TYPE_DIFFERENTIAL, + .mic1a_micbias = AMIC_MICBIAS_VAMIC1, + .mic1b_micbias = AMIC_MICBIAS_VAMIC1, + .mic2_micbias = AMIC_MICBIAS_VAMIC2 + }, + .ear_cmv = EAR_CMV_0_95V +}; + static struct gpio_keys_button snowball_key_array[] = { { .gpio = 32, @@ -195,24 +208,7 @@ static struct ab8500_platform_data ab8500_platdata = { .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), .gpio = &ab8500_gpio_pdata, -}; - -static struct resource ab8500_resources[] = { - [0] = { - .start = IRQ_DB8500_AB8500, - .end = IRQ_DB8500_AB8500, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device ab8500_device = { - .name = "ab8500-core", - .id = 0, - .dev = { - .platform_data = &ab8500_platdata, - }, - .num_resources = 1, - .resource = ab8500_resources, + .codec = &ab8500_codec_pdata, }; /* @@ -429,7 +425,6 @@ static struct hash_platform_data u8500_hash1_platform_data = { /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, - &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -591,7 +586,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, &snowball_sbnet_dev, - &ab8500_device, }; static void __init mop500_init_machine(void) @@ -603,9 +597,8 @@ static void __init mop500_init_machine(void) mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; mop500_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); - /* FIXME: parent of ab8500 should be prcmu */ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -638,7 +631,7 @@ static void __init snowball_init_machine(void) int i; snowball_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -670,7 +663,7 @@ static void __init hrefv60_init_machine(void) mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_init_devices(&ab8500_platdata); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -771,9 +764,6 @@ static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, { .compatible = "stericsson,db8500-prcmu", }, - { .compatible = "stericsson,db8500-prcmu-regulator", }, - { .compatible = "stericsson,ab8500", }, - { .compatible = "stericsson,ab8500-regulator", }, { .compatible = "simple-bus"}, { }, }; @@ -807,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -814,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -825,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index c8dd94f606d..db3c52d56ca 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -16,6 +16,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/mfd/abx500/ab8500.h> #include <asm/mach/map.h> #include <asm/pmu.h> @@ -115,7 +116,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) return ret; } -static struct arm_pmu_platdata db8500_pmu_platdata = { +struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; @@ -206,7 +207,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(void) +struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) { struct device *parent; int i; @@ -223,6 +224,8 @@ struct device * __init u8500_init_devices(void) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; + db8500_prcmu_device.dev.platform_data = ab8500; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 6e470656026..ecdd8386cff 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -12,7 +12,7 @@ #include <linux/dma-mapping.h> #include <linux/sys_soc.h> #include <linux/amba/bus.h> -#include <plat/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #include <mach/crypto-ux500.h> struct spi_master_cntlr; @@ -56,27 +56,15 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, struct nmk_i2c_controller; -static inline struct platform_device * +static inline struct amba_device * dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, struct nmk_i2c_controller *data) { - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; + /* Conjure a name similar to what the platform device used to have */ + char name[16]; - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "nmk-i2c", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = data, - .size_data = sizeof(*data), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); + snprintf(name, sizeof(name), "nmk-i2c.%d", id); + return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0); } static inline struct amba_device * diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 8b7ed82a286..7914e5eaa9c 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -13,11 +13,12 @@ #include <asm/mach/time.h> #include <linux/init.h> +#include <linux/mfd/abx500/ab8500.h> void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(void); +extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 54e69973f39..7ce51767c99 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -5,5 +5,3 @@ obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o obj-$(CONFIG_MACH_BV07) += bv07.o obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o - -obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c deleted file mode 100644 index 8ad825e9359..00000000000 --- a/arch/arm/mach-vt8500/pwm.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * arch/arm/mach-vt8500/pwm.c - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/pwm.h> -#include <linux/delay.h> - -#include <asm/div64.h> - -#define VT8500_NR_PWMS 4 - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device { - struct list_head node; - struct platform_device *pdev; - - const char *label; - - void __iomem *regbase; - - unsigned int use_count; - unsigned int pwm_id; -}; - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) -static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) -{ - int loops = msecs_to_loops(10); - while ((readb(reg) & bitmask) && --loops) - cpu_relax(); - - if (unlikely(!loops)) - pr_warning("Waiting for status bits 0x%x to clear timed out\n", - bitmask); -} - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long c; - unsigned long period_cycles, prescale, pv, dc; - - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - c = 25000000/2; /* wild guess --- need to implement clocks */ - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - if (period_cycles < 1) - period_cycles = 1; - prescale = (period_cycles - 1) / 4096; - pv = period_cycles / (prescale + 1) - 1; - if (pv > 4095) - pv = 4095; - - if (prescale > 1023) - return -EINVAL; - - c = (unsigned long long)pv * duty_ns; - do_div(c, period_ns); - dc = c; - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1)); - writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4)); - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2)); - writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4)); - - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3)); - writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4)); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); - writel(5, pwm->regbase + (pwm->pwm_id << 4)); - return 0; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); - writel(0, pwm->regbase + (pwm->pwm_id << 4)); -} -EXPORT_SYMBOL(pwm_disable); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else { - pwm = ERR_PTR(-EBUSY); - } - } else { - pwm = ERR_PTR(-ENOENT); - } - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else { - pr_warning("PWM device already freed\n"); - } - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static inline void __add_pwm(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); -} - -static int __devinit pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwms; - struct resource *r; - int ret = 0; - int i; - - pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL); - if (pwms == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - for (i = 0; i < VT8500_NR_PWMS; i++) { - pwms[i].use_count = 0; - pwms[i].pwm_id = i; - pwms[i].pdev = pdev; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free; - } - - pwms[0].regbase = ioremap(r->start, resource_size(r)); - if (pwms[0].regbase == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - for (i = 1; i < VT8500_NR_PWMS; i++) - pwms[i].regbase = pwms[0].regbase; - - for (i = 0; i < VT8500_NR_PWMS; i++) - __add_pwm(&pwms[i]); - - platform_set_drvdata(pdev, pwms); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free: - kfree(pwms); - return ret; -} - -static int __devexit pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwms; - struct resource *r; - int i; - - pwms = platform_get_drvdata(pdev); - if (pwms == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - - for (i = 0; i < VT8500_NR_PWMS; i++) - list_del(&pwms[i].node); - mutex_unlock(&pwm_lock); - - iounmap(pwms[0].regbase); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - kfree(pwms); - return 0; -} - -static struct platform_driver pwm_driver = { - .driver = { - .name = "vt8500-pwm", - .owner = THIS_MODULE, - }, - .probe = pwm_probe, - .remove = __devexit_p(pwm_remove), -}; - -static int __init pwm_init(void) -{ - return platform_driver_register(&pwm_driver); -} -arch_initcall(pwm_init); - -static void __exit pwm_exit(void) -{ - platform_driver_unregister(&pwm_driver); -} -module_exit(pwm_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 806cc4f6351..4e07eec1270 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -14,6 +14,7 @@ #include <linux/percpu.h> #include <asm/mmu_context.h> +#include <asm/thread_notify.h> #include <asm/tlbflush.h> static DEFINE_RAW_SPINLOCK(cpu_asid_lock); @@ -48,6 +49,41 @@ void cpu_set_reserved_ttbr0(void) } #endif +#ifdef CONFIG_PID_IN_CONTEXTIDR +static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, + void *t) +{ + u32 contextidr; + pid_t pid; + struct thread_info *thread = t; + + if (cmd != THREAD_NOTIFY_SWITCH) + return NOTIFY_DONE; + + pid = task_pid_nr(thread->task) << ASID_BITS; + asm volatile( + " mrc p15, 0, %0, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" + : "=r" (contextidr), "+r" (pid) + : "I" (~ASID_MASK)); + isb(); + + return NOTIFY_OK; +} + +static struct notifier_block contextidr_notifier_block = { + .notifier_call = contextidr_notifier, +}; + +static int __init contextidr_notifier_init(void) +{ + return thread_register_notifier(&contextidr_notifier_block); +} +arch_initcall(contextidr_notifier_init); +#endif + /* * We fork()ed a process, and we need a new context for the child * to run in. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 655878bcc96..e59c4ab71bc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -22,13 +22,14 @@ #include <linux/memblock.h> #include <linux/slab.h> #include <linux/iommu.h> +#include <linux/io.h> #include <linux/vmalloc.h> +#include <linux/sizes.h> #include <asm/memory.h> #include <asm/highmem.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> -#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/dma-iommu.h> #include <asm/mach/map.h> @@ -72,7 +73,7 @@ static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(page, offset, size, dir); return pfn_to_dma(dev, page_to_pfn(page)) + offset; } @@ -95,7 +96,7 @@ static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)), handle & ~PAGE_MASK, size, dir); } @@ -124,6 +125,7 @@ struct dma_map_ops arm_dma_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, + .get_sgtable = arm_dma_get_sgtable, .map_page = arm_dma_map_page, .unmap_page = arm_dma_unmap_page, .map_sg = arm_dma_map_sg, @@ -217,148 +219,144 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU +#ifdef CONFIG_HUGETLB_PAGE +#error ARM Coherent DMA allocator does not (yet) support huge TLB +#endif -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT) - -/* - * These are the page tables (2MB each) covering uncached, DMA consistent allocations - */ -static pte_t **consistent_pte; - -#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M +static void *__alloc_from_contiguous(struct device *dev, size_t size, + pgprot_t prot, struct page **ret_page); -static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; +static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, + pgprot_t prot, struct page **ret_page, + const void *caller); -void __init init_consistent_dma_size(unsigned long size) +static void * +__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { - unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M); + struct vm_struct *area; + unsigned long addr; - BUG_ON(consistent_pte); /* Check we're called before DMA region init */ - BUG_ON(base < VMALLOC_END); + /* + * DMA allocation can be mapped to user space, so lets + * set VM_USERMAP flags too. + */ + area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, + caller); + if (!area) + return NULL; + addr = (unsigned long)area->addr; + area->phys_addr = __pfn_to_phys(page_to_pfn(page)); - /* Grow region to accommodate specified size */ - if (base < consistent_base) - consistent_base = base; + if (ioremap_page_range(addr, addr + size, area->phys_addr, prot)) { + vunmap((void *)addr); + return NULL; + } + return (void *)addr; } -#include "vmregion.h" - -static struct arm_vmregion_head consistent_head = { - .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock), - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_end = CONSISTENT_END, -}; - -#ifdef CONFIG_HUGETLB_PAGE -#error ARM Coherent DMA allocator does not (yet) support huge TLB -#endif - -/* - * Initialise the consistent memory allocation. - */ -static int __init consistent_init(void) +static void __dma_free_remap(void *cpu_addr, size_t size) { - int ret = 0; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - int i = 0; - unsigned long base = consistent_base; - unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT; - - if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) - return 0; - - consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL); - if (!consistent_pte) { - pr_err("%s: no memory\n", __func__); - return -ENOMEM; + unsigned int flags = VM_ARM_DMA_CONSISTENT | VM_USERMAP; + struct vm_struct *area = find_vm_area(cpu_addr); + if (!area || (area->flags & flags) != flags) { + WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr); + return; } - - pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END); - consistent_head.vm_start = base; - - do { - pgd = pgd_offset(&init_mm, base); - - pud = pud_alloc(&init_mm, pgd, base); - if (!pud) { - pr_err("%s: no pud tables\n", __func__); - ret = -ENOMEM; - break; - } - - pmd = pmd_alloc(&init_mm, pud, base); - if (!pmd) { - pr_err("%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - WARN_ON(!pmd_none(*pmd)); - - pte = pte_alloc_kernel(pmd, base); - if (!pte) { - pr_err("%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte[i++] = pte; - base += PMD_SIZE; - } while (base < CONSISTENT_END); - - return ret; + unmap_kernel_range((unsigned long)cpu_addr, size); + vunmap(cpu_addr); } -core_initcall(consistent_init); -static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page); +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K -static struct arm_vmregion_head coherent_head = { - .vm_lock = __SPIN_LOCK_UNLOCKED(&coherent_head.vm_lock), - .vm_list = LIST_HEAD_INIT(coherent_head.vm_list), +struct dma_pool { + size_t size; + spinlock_t lock; + unsigned long *bitmap; + unsigned long nr_pages; + void *vaddr; + struct page **pages; }; -static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; +static struct dma_pool atomic_pool = { + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, +}; static int __init early_coherent_pool(char *p) { - coherent_pool_size = memparse(p, &p); + atomic_pool.size = memparse(p, &p); return 0; } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ -static int __init coherent_init(void) +static int __init atomic_pool_init(void) { + struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); - size_t size = coherent_pool_size; + unsigned long nr_pages = pool->size >> PAGE_SHIFT; + unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; + int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); - if (!IS_ENABLED(CONFIG_CMA)) - return 0; + bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!bitmap) + goto no_bitmap; + + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; - ptr = __alloc_from_contiguous(NULL, size, prot, &page); + if (IS_ENABLED(CONFIG_CMA)) + ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); + else + ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, + &page, NULL); if (ptr) { - coherent_head.vm_start = (unsigned long) ptr; - coherent_head.vm_end = (unsigned long) ptr + size; - printk(KERN_INFO "DMA: preallocated %u KiB pool for atomic coherent allocations\n", - (unsigned)size / 1024); + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + + spin_lock_init(&pool->lock); + pool->vaddr = ptr; + pool->pages = pages; + pool->bitmap = bitmap; + pool->nr_pages = nr_pages; + pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", + (unsigned)pool->size / 1024); return 0; } - printk(KERN_ERR "DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", - (unsigned)size / 1024); +no_pages: + kfree(bitmap); +no_bitmap: + pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", + (unsigned)pool->size / 1024); return -ENOMEM; } /* * CMA is activated by core_initcall, so we must be called after it. */ -postcore_initcall(coherent_init); +postcore_initcall(atomic_pool_init); struct dma_contig_early_reserve { phys_addr_t base; @@ -388,7 +386,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); @@ -406,112 +404,6 @@ void __init dma_contiguous_remap(void) } } -static void * -__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, - const void *caller) -{ - struct arm_vmregion *c; - size_t align; - int bit; - - if (!consistent_pte) { - pr_err("%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } - - /* - * Align the virtual region allocation - maximum alignment is - * a section size, minimum is a page size. This helps reduce - * fragmentation of the DMA space, and also prevents allocations - * smaller than a section from crossing a section boundary. - */ - bit = fls(size - 1); - if (bit > SECTION_SHIFT) - bit = SECTION_SHIFT; - align = 1 << bit; - - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller); - if (c) { - pte_t *pte; - int idx = CONSISTENT_PTE_INDEX(c->vm_start); - u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - - pte = consistent_pte[idx] + off; - c->priv = page; - - do { - BUG_ON(!pte_none(*pte)); - - set_pte_ext(pte, mk_pte(page, prot), 0); - page++; - pte++; - off++; - if (off >= PTRS_PER_PTE) { - off = 0; - pte = consistent_pte[++idx]; - } - } while (size -= PAGE_SIZE); - - dsb(); - - return (void *)c->vm_start; - } - return NULL; -} - -static void __dma_free_remap(void *cpu_addr, size_t size) -{ - struct arm_vmregion *c; - unsigned long addr; - pte_t *ptep; - int idx; - u32 off; - - c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr); - if (!c) { - pr_err("%s: trying to free invalid coherent area: %p\n", - __func__, cpu_addr); - dump_stack(); - return; - } - - if ((c->vm_end - c->vm_start) != size) { - pr_err("%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - idx = CONSISTENT_PTE_INDEX(c->vm_start); - off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - ptep = consistent_pte[idx] + off; - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - - ptep++; - addr += PAGE_SIZE; - off++; - if (off >= PTRS_PER_PTE) { - off = 0; - ptep = consistent_pte[++idx]; - } - - if (pte_none(pte) || !pte_present(pte)) - pr_crit("%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - arm_vmregion_free(&consistent_head, c); -} - static int __dma_update_pte(pte_t *pte, pgtable_t token, unsigned long addr, void *data) { @@ -552,16 +444,17 @@ static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, return ptr; } -static void *__alloc_from_pool(struct device *dev, size_t size, - struct page **ret_page, const void *caller) +static void *__alloc_from_pool(size_t size, struct page **ret_page) { - struct arm_vmregion *c; - size_t align; + struct dma_pool *pool = &atomic_pool; + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned int pageno; + unsigned long flags; + void *ptr = NULL; + unsigned long align_mask; - if (!coherent_head.vm_start) { - printk(KERN_ERR "%s: coherent pool not initialised!\n", - __func__); - dump_stack(); + if (!pool->vaddr) { + WARN(1, "coherent pool not initialised!\n"); return NULL; } @@ -570,36 +463,60 @@ static void *__alloc_from_pool(struct device *dev, size_t size, * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); - c = arm_vmregion_alloc(&coherent_head, align, size, 0, caller); - if (c) { - void *ptr = (void *)c->vm_start; - struct page *page = virt_to_page(ptr); - *ret_page = page; - return ptr; + align_mask = (1 << get_order(size)) - 1; + + spin_lock_irqsave(&pool->lock, flags); + pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, + 0, count, align_mask); + if (pageno < pool->nr_pages) { + bitmap_set(pool->bitmap, pageno, count); + ptr = pool->vaddr + PAGE_SIZE * pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } - return NULL; + spin_unlock_irqrestore(&pool->lock, flags); + + return ptr; +} + +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start >= pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; } -static int __free_from_pool(void *cpu_addr, size_t size) +static int __free_from_pool(void *start, size_t size) { - unsigned long start = (unsigned long)cpu_addr; - unsigned long end = start + size; - struct arm_vmregion *c; + struct dma_pool *pool = &atomic_pool; + unsigned long pageno, count; + unsigned long flags; - if (start < coherent_head.vm_start || end > coherent_head.vm_end) + if (!__in_atomic_pool(start, size)) return 0; - c = arm_vmregion_find_remove(&coherent_head, (unsigned long)start); + pageno = (start - pool->vaddr) >> PAGE_SHIFT; + count = size >> PAGE_SHIFT; - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } + spin_lock_irqsave(&pool->lock, flags); + bitmap_clear(pool->bitmap, pageno, count); + spin_unlock_irqrestore(&pool->lock, flags); - arm_vmregion_free(&coherent_head, c); return 1; } @@ -644,7 +561,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __get_dma_pgprot(attrs, prot) __pgprot(0) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL -#define __alloc_from_pool(dev, size, ret_page, c) NULL +#define __alloc_from_pool(size, ret_page) NULL #define __alloc_from_contiguous(dev, size, prot, ret) NULL #define __free_from_pool(cpu_addr, size) 0 #define __free_from_contiguous(dev, page, size) do { } while (0) @@ -702,10 +619,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (arch_is_coherent() || nommu()) addr = __alloc_simple_buffer(dev, size, gfp, &page); + else if (gfp & GFP_ATOMIC) + addr = __alloc_from_pool(size, &page); else if (!IS_ENABLED(CONFIG_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); - else if (gfp & GFP_ATOMIC) - addr = __alloc_from_pool(dev, size, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page); @@ -741,16 +658,22 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, { int ret = -ENXIO; #ifdef CONFIG_MMU + unsigned long nr_vma_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long pfn = dma_to_pfn(dev, dma_addr); + unsigned long off = vma->vm_pgoff; + vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) return ret; - ret = remap_pfn_range(vma, vma->vm_start, - pfn + vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); + if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) { + ret = remap_pfn_range(vma, vma->vm_start, + pfn + off, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); + } #endif /* CONFIG_MMU */ return ret; @@ -771,12 +694,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ @@ -785,6 +708,21 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, } } +int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t handle, size_t size, + struct dma_attrs *attrs) +{ + struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); + int ret; + + ret = sg_alloc_table(sgt, 1, GFP_KERNEL); + if (unlikely(ret)) + return ret; + + sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0); + return 0; +} + static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) @@ -998,9 +936,6 @@ static int arm_dma_set_mask(struct device *dev, u64 dma_mask) static int __init dma_debug_do_init(void) { -#ifdef CONFIG_MMU - arm_vmregion_create_proc("dma-mappings", &consistent_head); -#endif dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } @@ -1088,7 +1023,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return pages; error: - while (--i) + while (i--) if (pages[i]) __free_pages(pages[i], 0); if (array_size <= PAGE_SIZE) @@ -1117,61 +1052,32 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s * Create a CPU mapping for a specified pages */ static void * -__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot) +__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { - struct arm_vmregion *c; - size_t align; - size_t count = size >> PAGE_SHIFT; - int bit; + unsigned int i, nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; + struct vm_struct *area; + unsigned long p; - if (!consistent_pte[0]) { - pr_err("%s: not initialised\n", __func__); - dump_stack(); + area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, + caller); + if (!area) return NULL; - } - /* - * Align the virtual region allocation - maximum alignment is - * a section size, minimum is a page size. This helps reduce - * fragmentation of the DMA space, and also prevents allocations - * smaller than a section from crossing a section boundary. - */ - bit = fls(size - 1); - if (bit > SECTION_SHIFT) - bit = SECTION_SHIFT; - align = 1 << bit; + area->pages = pages; + area->nr_pages = nr_pages; + p = (unsigned long)area->addr; - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM), NULL); - if (c) { - pte_t *pte; - int idx = CONSISTENT_PTE_INDEX(c->vm_start); - int i = 0; - u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - - pte = consistent_pte[idx] + off; - c->priv = pages; - - do { - BUG_ON(!pte_none(*pte)); - - set_pte_ext(pte, mk_pte(pages[i], prot), 0); - pte++; - off++; - i++; - if (off >= PTRS_PER_PTE) { - off = 0; - pte = consistent_pte[++idx]; - } - } while (i < count); - - dsb(); - - return (void *)c->vm_start; + for (i = 0; i < nr_pages; i++) { + phys_addr_t phys = __pfn_to_phys(page_to_pfn(pages[i])); + if (ioremap_page_range(p, p + PAGE_SIZE, phys, prot)) + goto err; + p += PAGE_SIZE; } + return area->addr; +err: + unmap_kernel_range((unsigned long)area->addr, size); + vunmap(area->addr); return NULL; } @@ -1230,6 +1136,59 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + +static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) +{ + struct vm_struct *area; + + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + return cpu_addr; + + area = find_vm_area(cpu_addr); + if (area && (area->flags & VM_ARM_DMA_CONSISTENT)) + return area->pages; + return NULL; +} + +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1240,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1248,7 +1210,11 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, if (*handle == DMA_ERROR_CODE) goto err_buffer; - addr = __iommu_alloc_remap(pages, size, gfp, prot); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + return pages; + + addr = __iommu_alloc_remap(pages, size, gfp, prot, + __builtin_return_address(0)); if (!addr) goto err_mapping; @@ -1265,31 +1231,25 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs) { - struct arm_vmregion *c; + unsigned long uaddr = vma->vm_start; + unsigned long usize = vma->vm_end - vma->vm_start; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); - c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr); - - if (c) { - struct page **pages = c->priv; - - unsigned long uaddr = vma->vm_start; - unsigned long usize = vma->vm_end - vma->vm_start; - int i = 0; - do { - int ret; + if (!pages) + return -ENXIO; - ret = vm_insert_page(vma, uaddr, pages[i++]); - if (ret) { - pr_err("Remapping memory, error: %d\n", ret); - return ret; - } + do { + int ret = vm_insert_page(vma, uaddr, *pages++); + if (ret) { + pr_err("Remapping memory failed: %d\n", ret); + return ret; + } + uaddr += PAGE_SIZE; + usize -= PAGE_SIZE; + } while (usize > 0); - uaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } while (usize > 0); - } return 0; } @@ -1300,16 +1260,40 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, struct dma_attrs *attrs) { - struct arm_vmregion *c; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); size = PAGE_ALIGN(size); - c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr); - if (c) { - struct page **pages = c->priv; - __dma_free_remap(cpu_addr, size); - __iommu_remove_mapping(dev, handle, size); - __iommu_free_buffer(dev, pages, size); + if (!pages) { + WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr); + return; } + + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { + unmap_kernel_range((unsigned long)cpu_addr, size); + vunmap(cpu_addr); + } + + __iommu_remove_mapping(dev, handle, size); + __iommu_free_buffer(dev, pages, size); +} + +static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size, struct dma_attrs *attrs) +{ + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + struct page **pages = __iommu_get_pages(cpu_addr, attrs); + + if (!pages) + return -ENXIO; + + return sg_alloc_table_from_pages(sgt, pages, count, 0, size, + GFP_KERNEL); } /* @@ -1317,7 +1301,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, */ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, size_t size, dma_addr_t *handle, - enum dma_data_direction dir) + enum dma_data_direction dir, struct dma_attrs *attrs) { struct dma_iommu_mapping *mapping = dev->archdata.mapping; dma_addr_t iova, iova_base; @@ -1336,7 +1320,8 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, phys_addr_t phys = page_to_phys(sg_page(s)); unsigned int len = PAGE_ALIGN(s->offset + s->length); - if (!arch_is_coherent()) + if (!arch_is_coherent() && + !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); ret = iommu_map(mapping->domain, iova, phys, len, 0); @@ -1383,7 +1368,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) { if (__map_sg_chunk(dev, start, size, &dma->dma_address, - dir) < 0) + dir, attrs) < 0) goto bad_mapping; dma->dma_address += offset; @@ -1396,7 +1381,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, } size += s->length; } - if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir) < 0) + if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs) < 0) goto bad_mapping; dma->dma_address += offset; @@ -1430,7 +1415,8 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, if (sg_dma_len(s)) __iommu_remove_mapping(dev, sg_dma_address(s), sg_dma_len(s)); - if (!arch_is_coherent()) + if (!arch_is_coherent() && + !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir); } @@ -1492,7 +1478,7 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, dma_addr_t dma_addr; int ret, len = PAGE_ALIGN(size + offset); - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_cpu_to_dev(page, offset, size, dir); dma_addr = __alloc_iova(mapping, len); @@ -1531,7 +1517,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, if (!iova) return; - if (!arch_is_coherent()) + if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) __dma_page_dev_to_cpu(page, offset, size, dir); iommu_unmap(mapping->domain, iova, len); @@ -1571,6 +1557,7 @@ struct dma_map_ops iommu_ops = { .alloc = arm_iommu_alloc_attrs, .free = arm_iommu_free_attrs, .mmap = arm_iommu_mmap_attrs, + .get_sgtable = arm_iommu_get_sgtable, .map_page = arm_iommu_map_page, .unmap_page = arm_iommu_unmap_page, diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e03..40ca11ed6e5 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f54d5921976..9aec41fa80a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -21,13 +21,13 @@ #include <linux/gfp.h> #include <linux/memblock.h> #include <linux/dma-contiguous.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/memblock.h> #include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> -#include <asm/sizes.h> #include <asm/tlb.h> #include <asm/fixmap.h> diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 4f55f5062ab..566750fa57d 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -25,6 +25,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/io.h> +#include <linux/sizes.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -32,7 +33,6 @@ #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> -#include <asm/sizes.h> #include <asm/system_info.h> #include <asm/mach/map.h> diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 2e8a1efdf7b..a8ee92da354 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,10 +55,16 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) +/* consistent regions used by dma_alloc_attrs() */ +#define VM_ARM_DMA_CONSISTENT 0x20000000 + #endif #ifdef CONFIG_ZONE_DMA diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index cf4528d5177..c2fa21d0103 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -16,13 +16,13 @@ #include <linux/memblock.h> #include <linux/fs.h> #include <linux/vmalloc.h> +#include <linux/sizes.h> #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/sections.h> #include <asm/cachetype.h> #include <asm/setup.h> -#include <asm/sizes.h> #include <asm/smp_plat.h> #include <asm/tlb.h> #include <asm/highmem.h> @@ -422,12 +422,6 @@ static void __init build_mem_type_table(void) vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; /* - * Only use write-through for non-SMP systems - */ - if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) - vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte; - - /* * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ @@ -813,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -826,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) @@ -967,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 5900cd520e8..86b8b480634 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -107,6 +107,12 @@ ENTRY(cpu_v6_switch_mm) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 +#ifdef CONFIG_PID_IN_CONTEXTIDR + mrc p15, 0, r2, c13, c0, 1 @ read current context ID + bic r2, r2, #0xff @ extract the PID + and r1, r1, #0xff + orr r1, r1, r2 @ insert into new context ID +#endif mcr p15, 0, r1, c13, c0, 1 @ set context ID #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 42ac069c801..fd045e70639 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -46,6 +46,11 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif +#ifdef CONFIG_PID_IN_CONTEXTIDR + mrc p15, 0, r2, c13, c0, 1 @ read current context ID + lsr r2, r2, #8 @ extract the PID + bfi r1, r2, #8, #24 @ insert into new context ID +#endif #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 845f461f8ec..ea94765acf9 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -39,10 +39,18 @@ ENTRY(v7wbi_flush_user_tlb_range) mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) +#endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT 1: +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable) +#else ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) +#endif ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ @@ -67,7 +75,11 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable) +#else ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) +#endif ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ cmp r0, r1 diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 4e0a371630b..99c63d4b6af 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -23,26 +23,37 @@ #include <asm/ptrace.h> #ifdef CONFIG_HW_PERF_EVENTS + +/* + * OProfile has a curious naming scheme for the ARM PMUs, but they are + * part of the user ABI so we need to map from the perf PMU name for + * supported PMUs. + */ +static struct op_perf_name { + char *perf_name; + char *op_name; +} op_perf_name_map[] = { + { "xscale1", "arm/xscale1" }, + { "xscale1", "arm/xscale2" }, + { "v6", "arm/armv6" }, + { "v6mpcore", "arm/mpcore" }, + { "ARMv7 Cortex-A8", "arm/armv7" }, + { "ARMv7 Cortex-A9", "arm/armv7-ca9" }, +}; + char *op_name_from_perf_id(void) { - enum arm_perf_pmu_ids id = armpmu_get_pmu_id(); - - switch (id) { - case ARM_PERF_PMU_ID_XSCALE1: - return "arm/xscale1"; - case ARM_PERF_PMU_ID_XSCALE2: - return "arm/xscale2"; - case ARM_PERF_PMU_ID_V6: - return "arm/armv6"; - case ARM_PERF_PMU_ID_V6MP: - return "arm/mpcore"; - case ARM_PERF_PMU_ID_CA8: - return "arm/armv7"; - case ARM_PERF_PMU_ID_CA9: - return "arm/armv7-ca9"; - default: - return NULL; + int i; + struct op_perf_name names; + const char *perf_name = perf_pmu_name(); + + for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) { + names = op_perf_name_map[i]; + if (!strcmp(names.perf_name, perf_name)) + return names.op_name; } + + return NULL; } #endif diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index c722f9ce691..baf9064c084 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -47,12 +47,6 @@ config MXC_TZIC config MXC_AVIC bool -config MXC_PWM - tristate "Enable PWM driver" - select HAVE_PWM - help - Enable support for the i.MX PWM controller(s). - config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" help diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 63b064b5c1d..6ac72003115 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_MXC_AVIC) += avic.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o -obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h index 375cdd0cf87..8289d915e61 100644 --- a/arch/arm/plat-mxc/include/mach/i2c.h +++ b/arch/arm/plat-mxc/include/mach/i2c.h @@ -15,7 +15,7 @@ * **/ struct imxi2c_platform_data { - int bitrate; + u32 bitrate; }; #endif /* __ASM_ARCH_I2C_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 627d94f1b01..ec466400a20 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -98,6 +98,7 @@ #define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) #define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) #define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) #define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c deleted file mode 100644 index c0cab2270dd..00000000000 --- a/arch/arm/plat-mxc/pwm.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * simple driver for PWM (Pulse Width Modulator) controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> -#include <mach/hardware.h> - - -/* i.MX1 and i.MX21 share the same PWM function block: */ - -#define MX1_PWMC 0x00 /* PWM Control Register */ -#define MX1_PWMS 0x04 /* PWM Sample Register */ -#define MX1_PWMP 0x08 /* PWM Period Register */ - - -/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ - -#define MX3_PWMCR 0x00 /* PWM Control Register */ -#define MX3_PWMSAR 0x0C /* PWM Sample Register */ -#define MX3_PWMPR 0x10 /* PWM Period Register */ -#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) -#define MX3_PWMCR_DOZEEN (1 << 24) -#define MX3_PWMCR_WAITEN (1 << 23) -#define MX3_PWMCR_DBGEN (1 << 22) -#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) -#define MX3_PWMCR_CLKSRC_IPG (1 << 16) -#define MX3_PWMCR_EN (1 << 0) - - - -struct pwm_device { - struct list_head node; - struct platform_device *pdev; - - const char *label; - struct clk *clk; - - int clk_enabled; - void __iomem *mmio_base; - - unsigned int use_count; - unsigned int pwm_id; -}; - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - if (!(cpu_is_mx1() || cpu_is_mx21())) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - u32 cr; - - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); - writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - - cr = MX3_PWMCR_PRESCALER(prescale) | - MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (cpu_is_mx25()) - cr |= MX3_PWMCR_CLKSRC_IPG; - else - cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; - - writel(cr, pwm->mmio_base + MX3_PWMCR); - } else if (cpu_is_mx1() || cpu_is_mx21()) { - /* The PWM subsystem allows for exact frequencies. However, - * I cannot connect a scope on my device to the PWM line and - * thus cannot provide the program the PWM controller - * exactly. Instead, I'm relying on the fact that the - * Bootloader (u-boot or WinCE+haret) has programmed the PWM - * function group already. So I'll just modify the PWM sample - * register to follow the ratio of duty_ns vs. period_ns - * accordingly. - * - * This is good enough for programming the brightness of - * the LCD backlight. - * - * The real implementation would divide PERCLK[0] first by - * both the prescaler (/1 .. /128) and then by CLKSEL - * (/2 .. /16). - */ - u32 max = readl(pwm->mmio_base + MX1_PWMP); - u32 p = max * duty_ns / period_ns; - writel(max - p, pwm->mmio_base + MX1_PWMS); - } else { - BUG(); - } - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - int rc = 0; - - if (!pwm->clk_enabled) { - rc = clk_prepare_enable(pwm->clk); - if (!rc) - pwm->clk_enabled = 1; - } - return rc; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - writel(0, pwm->mmio_base + MX3_PWMCR); - - if (pwm->clk_enabled) { - clk_disable_unprepare(pwm->clk); - pwm->clk_enabled = 0; - } -} -EXPORT_SYMBOL(pwm_disable); - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - pr_warning("PWM device already freed\n"); - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static int __devinit mxc_pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - int ret = 0; - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - pwm->clk = clk_get(&pdev->dev, "pwm"); - - if (IS_ERR(pwm->clk)) { - ret = PTR_ERR(pwm->clk); - goto err_free; - } - - pwm->clk_enabled = 0; - - pwm->use_count = 0; - pwm->pwm_id = pdev->id; - pwm->pdev = pdev; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - pwm->mmio_base = ioremap(r->start, resource_size(r)); - if (pwm->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); - - platform_set_drvdata(pdev, pwm); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free_clk: - clk_put(pwm->clk); -err_free: - kfree(pwm); - return ret; -} - -static int __devexit mxc_pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - - pwm = platform_get_drvdata(pdev); - if (pwm == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - list_del(&pwm->node); - mutex_unlock(&pwm_lock); - - iounmap(pwm->mmio_base); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - clk_put(pwm->clk); - - kfree(pwm); - return 0; -} - -static struct platform_driver mxc_pwm_driver = { - .driver = { - .name = "mxc_pwm", - }, - .probe = mxc_pwm_probe, - .remove = __devexit_p(mxc_pwm_remove), -}; - -static int __init mxc_pwm_init(void) -{ - return platform_driver_register(&mxc_pwm_driver); -} -arch_initcall(mxc_pwm_init); - -static void __exit mxc_pwm_exit(void) -{ - platform_driver_unregister(&mxc_pwm_driver); -} -module_exit(mxc_pwm_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index c2193178210..3ed1adbc09f 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -23,6 +23,7 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <mach/irqs.h> #include "irq-common.h" diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 8ba70ffc31e..00000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout(ms) - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - int timeout; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a..938b50a3343 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcff..bb5d08a70db 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 5493bd95da5..eb3e4d55534 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -81,8 +81,6 @@ struct omap_mmc_platform_data { /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); - u64 dma_mask; - /* Integrating attributes from the omap_hwmod layer */ u8 controller_flags; diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f106..324d31b1485 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a13678..7f7b112accc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181cb5c9..024f3b08db2 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -68,6 +68,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -106,6 +107,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -113,6 +115,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -175,8 +178,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* @@ -203,8 +208,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -218,7 +223,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index c1793786aea..b8b747a9d36 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -47,6 +47,7 @@ void __init orion_clkdev_init(struct clk *tclk) orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); } /* Fill in the resources structure and link it into the platform @@ -290,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -342,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index af95af25730..dfda74fae6f 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -8,15 +8,22 @@ * warranty of any kind, whether express or implied. */ +#define DEBUG + #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <plat/gpio.h> /* * GPIO unit register offsets. @@ -38,6 +45,7 @@ struct orion_gpio_chip { unsigned long valid_output; int mask_offset; int secondary_irq_base; + struct irq_domain *domain; }; static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip) @@ -222,10 +230,10 @@ static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) struct orion_gpio_chip *ochip = container_of(chip, struct orion_gpio_chip, chip); - return ochip->secondary_irq_base + pin; + return irq_create_mapping(ochip->domain, + ochip->secondary_irq_base + pin); } - /* * Orion-specific GPIO API extensions. */ @@ -353,12 +361,10 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) int pin; u32 u; - pin = d->irq - gc->irq_base; + pin = d->hwirq - ochip->secondary_irq_base; u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { - printk(KERN_ERR "orion gpio_irq_set_type failed " - "(irq %d, pin %d).\n", d->irq, pin); return -EINVAL; } @@ -397,17 +403,53 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) u &= ~(1 << pin); /* rising */ writel(u, GPIO_IN_POL(ochip)); } - return 0; } -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base) +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct orion_gpio_chip *ochip = irq_get_handler_data(irq); + u32 cause, type; + int i; + + if (ochip == NULL) + return; + + cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); + cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); + + for (i = 0; i < ochip->chip.ngpio; i++) { + int irq; + + irq = ochip->secondary_irq_base + i; + + if (!(cause & (1 << i))) + continue; + + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + polarity = readl(GPIO_IN_POL(ochip)); + polarity ^= 1 << i; + writel(polarity, GPIO_IN_POL(ochip)); + } + generic_handle_irq(irq); + } +} + +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irqs[4]) { struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; char gc_label[16]; + int i; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; @@ -426,6 +468,10 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ochip->chip.base = gpio_base; ochip->chip.ngpio = ngpio; ochip->chip.can_sleep = 0; +#ifdef CONFIG_OF + ochip->chip.of_node = np; +#endif + spin_lock_init(&ochip->lock); ochip->base = (void __iomem *)base; ochip->valid_input = 0; @@ -435,8 +481,6 @@ void __init orion_gpio_init(int gpio_base, int ngpio, gpiochip_add(&ochip->chip); - orion_gpio_chip_count++; - /* * Mask and clear GPIO interrupts. */ @@ -444,16 +488,28 @@ void __init orion_gpio_init(int gpio_base, int ngpio, writel(0, GPIO_EDGE_MASK(ochip)); writel(0, GPIO_LEVEL_MASK(ochip)); - gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base, + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) { + if (irqs[i]) { + irq_set_handler_data(irqs[i], ochip); + irq_set_chained_handler(irqs[i], gpio_irq_handler); + } + } + + gc = irq_alloc_generic_chip("orion_gpio_irq", 2, + secondary_irq_base, ochip->base, handle_level_irq); gc->private = ochip; - ct = gc->chip_types; ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; + ct->chip.name = ochip->chip.label; ct++; ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; @@ -464,41 +520,69 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; ct->handler = handle_edge_irq; + ct->chip.name = ochip->chip.label; irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); -} -void orion_gpio_irq_handler(int pinoff) -{ - struct orion_gpio_chip *ochip; - u32 cause, type; - int i; - - ochip = orion_gpio_chip_find(pinoff); - if (ochip == NULL) - return; - - cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); - cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); - - for (i = 0; i < ochip->chip.ngpio; i++) { - int irq; + /* Setup irq domain on top of the generic chip. */ + ochip->domain = irq_domain_add_legacy(np, + ochip->chip.ngpio, + ochip->secondary_irq_base, + ochip->secondary_irq_base, + &irq_domain_simple_ops, + ochip); + if (!ochip->domain) + panic("%s: couldn't allocate irq domain (DT).\n", + ochip->chip.label); - irq = ochip->secondary_irq_base + i; + orion_gpio_chip_count++; +} - if (!(cause & (1 << i))) - continue; +#ifdef CONFIG_OF +static void __init orion_gpio_of_init_one(struct device_node *np, + int irq_gpio_base) +{ + int ngpio, gpio_base, mask_offset; + void __iomem *base; + int ret, i; + int irqs[4]; + int secondary_irq_base; + + ret = of_property_read_u32(np, "ngpio", &ngpio); + if (ret) + goto out; + ret = of_property_read_u32(np, "mask-offset", &mask_offset); + if (ret == -EINVAL) + mask_offset = 0; + else + goto out; + base = of_iomap(np, 0); + if (!base) + goto out; + + secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); + gpio_base = 32 * orion_gpio_chip_count; + + /* Get the interrupt numbers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) + irqs[i] = irq_of_parse_and_map(np, i); + + orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, + secondary_irq_base, irqs); + return; +out: + pr_err("%s: %s: missing mandatory property\n", __func__, np->name); +} - type = irqd_get_trigger_type(irq_get_irq_data(irq)); - if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { - /* Swap polarity (race with GPIO line) */ - u32 polarity; +void __init orion_gpio_of_init(int irq_gpio_base) +{ + struct device_node *np; - polarity = readl(GPIO_IN_POL(ochip)); - polarity ^= 1 << i; - writel(polarity, GPIO_IN_POL(ochip)); - } - generic_handle_irq(irq); - } + for_each_compatible_node(np, NULL, "marvell,orion-gpio") + orion_gpio_of_init_one(np, irq_gpio_base); } +#endif diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb21360..ae2377ef63e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index bec0c98ce41..81c6fc8a7b2 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/types.h> - +#include <linux/irqdomain.h> /* * Orion-specific GPIO API extensions. */ @@ -27,13 +27,11 @@ int orion_gpio_led_blink_set(unsigned gpio, int state, void orion_gpio_set_valid(unsigned pin, int mode); /* Initialize gpiolib. */ -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base); - -/* - * GPIO interrupt handling. - */ -void orion_gpio_irq_handler(int irqoff); - +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irq[4]); +void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index f05eeab9496..50547e41793 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,6 +12,5 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); - - +void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 2d5b9c1ef38..d751964def4 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -11,8 +11,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <plat/irq.h> +#include <plat/gpio.h> void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { @@ -32,3 +36,39 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } + +#ifdef CONFIG_OF +static int __init orion_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + int i = 0, irq_gpio; + void __iomem *base; + + do { + base = of_iomap(np, i); + if (base) { + orion_irq_init(i * 32, base); + i++; + } + } while (base); + + irq_domain_add_legacy(np, i * 32, 0, 0, + &irq_domain_simple_ops, NULL); + + irq_gpio = i * 32; + orion_gpio_of_init(irq_gpio); + + return 0; +} + +static const struct of_device_id orion_irq_match[] = { + { .compatible = "marvell,orion-intc", + .data = orion_add_irq_domain, }, + {}, +}; + +void __init orion_dt_init_irq(void) +{ + of_irq_init(orion_irq_match); +} +#endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index f302d048392..af8e484001e 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o -obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c deleted file mode 100644 index ef32686feef..00000000000 --- a/arch/arm/plat-pxa/pwm.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/pwm.c - * - * simple driver for PWM (Pulse Width Modulator) controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2008-02-13 initial version - * eric miao <eric.miao@marvell.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> - -#include <asm/div64.h> - -#define HAS_SECONDARY_PWM 0x10 -#define PWM_ID_BASE(d) ((d) & 0xf) - -static const struct platform_device_id pwm_id_table[] = { - /* PWM has_secondary_pwm? */ - { "pxa25x-pwm", 0 }, - { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM }, - { "pxa168-pwm", 1 }, - { "pxa910-pwm", 1 }, - { }, -}; -MODULE_DEVICE_TABLE(platform, pwm_id_table); - -/* PWM registers and bits definitions */ -#define PWMCR (0x00) -#define PWMDCR (0x04) -#define PWMPCR (0x08) - -#define PWMCR_SD (1 << 6) -#define PWMDCR_FD (1 << 10) - -struct pwm_device { - struct list_head node; - struct pwm_device *secondary; - struct platform_device *pdev; - - const char *label; - struct clk *clk; - int clk_enabled; - void __iomem *mmio_base; - - unsigned int use_count; - unsigned int pwm_id; -}; - -/* - * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE - * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE - */ -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long c; - unsigned long period_cycles, prescale, pv, dc; - - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - if (period_cycles < 1) - period_cycles = 1; - prescale = (period_cycles - 1) / 1024; - pv = period_cycles / (prescale + 1) - 1; - - if (prescale > 63) - return -EINVAL; - - if (duty_ns == period_ns) - dc = PWMDCR_FD; - else - dc = (pv + 1) * duty_ns / period_ns; - - /* NOTE: the clock to PWM has to be enabled first - * before writing to the registers - */ - clk_enable(pwm->clk); - __raw_writel(prescale, pwm->mmio_base + PWMCR); - __raw_writel(dc, pwm->mmio_base + PWMDCR); - __raw_writel(pv, pwm->mmio_base + PWMPCR); - clk_disable(pwm->clk); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - int rc = 0; - - if (!pwm->clk_enabled) { - rc = clk_enable(pwm->clk); - if (!rc) - pwm->clk_enabled = 1; - } - return rc; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - if (pwm->clk_enabled) { - clk_disable(pwm->clk); - pwm->clk_enabled = 0; - } -} -EXPORT_SYMBOL(pwm_disable); - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - pr_warning("PWM device already freed\n"); - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static inline void __add_pwm(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); -} - -static int __devinit pwm_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct pwm_device *pwm, *secondary = NULL; - struct resource *r; - int ret = 0; - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - pwm->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(pwm->clk)) { - ret = PTR_ERR(pwm->clk); - goto err_free; - } - pwm->clk_enabled = 0; - - pwm->use_count = 0; - pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id; - pwm->pdev = pdev; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - pwm->mmio_base = ioremap(r->start, resource_size(r)); - if (pwm->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - if (id->driver_data & HAS_SECONDARY_PWM) { - secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (secondary == NULL) { - ret = -ENOMEM; - goto err_free_mem; - } - - *secondary = *pwm; - pwm->secondary = secondary; - - /* registers for the second PWM has offset of 0x10 */ - secondary->mmio_base = pwm->mmio_base + 0x10; - secondary->pwm_id = pdev->id + 2; - } - - __add_pwm(pwm); - if (secondary) - __add_pwm(secondary); - - platform_set_drvdata(pdev, pwm); - return 0; - -err_free_mem: - release_mem_region(r->start, resource_size(r)); -err_free_clk: - clk_put(pwm->clk); -err_free: - kfree(pwm); - return ret; -} - -static int __devexit pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - - pwm = platform_get_drvdata(pdev); - if (pwm == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - - if (pwm->secondary) { - list_del(&pwm->secondary->node); - kfree(pwm->secondary); - } - - list_del(&pwm->node); - mutex_unlock(&pwm_lock); - - iounmap(pwm->mmio_base); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - clk_put(pwm->clk); - kfree(pwm); - return 0; -} - -static struct platform_driver pwm_driver = { - .driver = { - .name = "pxa25x-pwm", - .owner = THIS_MODULE, - }, - .probe = pwm_probe, - .remove = __devexit_p(pwm_remove), - .id_table = pwm_id_table, -}; - -static int __init pwm_init(void) -{ - return platform_driver_register(&pwm_driver); -} -arch_initcall(pwm_init); - -static void __exit pwm_exit(void) -{ - platform_driver_unregister(&pwm_driver); -} -module_exit(pwm_exit); - -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f7538..db98e7021f0 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1..9c3b90c3538 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index b7871749667..9e40e8d0074 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,7 +59,3 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o - -# PWM support - -obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 65c5eca475e..d1116e2dfbe 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -144,6 +144,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; int ret; if (IS_ERR(clk)) @@ -159,9 +160,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); ret = (clk->ops->set_rate)(clk, rate); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } @@ -173,17 +174,18 @@ struct clk *clk_get_parent(struct clk *clk) int clk_set_parent(struct clk *clk, struct clk *parent) { + unsigned long flags; int ret = 0; if (IS_ERR(clk)) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if (clk->ops && clk->ops->set_parent) ret = (clk->ops->set_parent)(clk, parent); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce3553..fc49f3dabd7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index df8155b9d4d..08740eed050 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,7 +24,7 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -#include<linux/types.h> +#include <linux/types.h> typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 00000000000..331d046ac2c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdb..15070284343 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c deleted file mode 100644 index d3583050fb0..00000000000 --- a/arch/arm/plat-samsung/pwm.c +++ /dev/null @@ -1,416 +0,0 @@ -/* arch/arm/plat-s3c/pwm.c - * - * Copyright (c) 2007 Ben Dooks - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * S3C series PWM device core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> - -#include <mach/map.h> - -#include <plat/regs-timer.h> - -struct pwm_device { - struct list_head list; - struct platform_device *pdev; - - struct clk *clk_div; - struct clk *clk; - const char *label; - - unsigned int period_ns; - unsigned int duty_ns; - - unsigned char tcon_base; - unsigned char use_count; - unsigned char pwm_id; -}; - -#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) - -static struct clk *clk_scaler[2]; - -static inline int pwm_is_tdiv(struct pwm_device *pwm) -{ - return clk_get_parent(pwm->clk) == pwm->clk_div; -} - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, list) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count = 1; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} - -EXPORT_SYMBOL(pwm_request); - - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id); - - mutex_unlock(&pwm_lock); -} - -EXPORT_SYMBOL(pwm_free); - -#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) -#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) -#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) -#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) - -int pwm_enable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - unsigned long flags; - unsigned long tcon; - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon &= ~pwm_tcon_start(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(pwm_disable); - -static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) -{ - unsigned long tin_parent_rate; - unsigned int div; - - tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div)); - pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate); - - for (div = 2; div <= 16; div *= 2) { - if ((tin_parent_rate / (div << 16)) < freq) - return tin_parent_rate / div; - } - - return tin_parent_rate / 16; -} - -#define NS_IN_HZ (1000000000UL) - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long tin_rate; - unsigned long tin_ns; - unsigned long period; - unsigned long flags; - unsigned long tcon; - unsigned long tcnt; - long tcmp; - - /* We currently avoid using 64bit arithmetic by using the - * fact that anything faster than 1Hz is easily representable - * by 32bits. */ - - if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) - return -ERANGE; - - if (duty_ns > period_ns) - return -EINVAL; - - if (period_ns == pwm->period_ns && - duty_ns == pwm->duty_ns) - return 0; - - /* The TCMP and TCNT can be read without a lock, they're not - * shared between the timers. */ - - tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id)); - tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id)); - - period = NS_IN_HZ / period_ns; - - pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n", - duty_ns, period_ns, period); - - /* Check to see if we are changing the clock rate of the PWM */ - - if (pwm->period_ns != period_ns) { - if (pwm_is_tdiv(pwm)) { - tin_rate = pwm_calc_tin(pwm, period); - clk_set_rate(pwm->clk_div, tin_rate); - } else - tin_rate = clk_get_rate(pwm->clk); - - pwm->period_ns = period_ns; - - pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate); - - tin_ns = NS_IN_HZ / tin_rate; - tcnt = period_ns / tin_ns; - } else - tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk); - - /* Note, counters count down */ - - tcmp = duty_ns / tin_ns; - tcmp = tcnt - tcmp; - /* the pwm hw only checks the compare register after a decrement, - so the pin never toggles if tcmp = tcnt */ - if (tcmp == tcnt) - tcmp--; - - pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); - - if (tcmp < 0) - tcmp = 0; - - /* Update the PWM register block. */ - - local_irq_save(flags); - - __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id)); - __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id)); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_manulupdate(pwm); - tcon |= pwm_tcon_autoreload(pwm); - __raw_writel(tcon, S3C2410_TCON); - - tcon &= ~pwm_tcon_manulupdate(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(pwm_config); - -static int pwm_register(struct pwm_device *pwm) -{ - pwm->duty_ns = -1; - pwm->period_ns = -1; - - mutex_lock(&pwm_lock); - list_add_tail(&pwm->list, &pwm_list); - mutex_unlock(&pwm_lock); - - return 0; -} - -static int s3c_pwm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct pwm_device *pwm; - unsigned long flags; - unsigned long tcon; - unsigned int id = pdev->id; - int ret; - - if (id == 4) { - dev_err(dev, "TIMER4 is currently not supported\n"); - return -ENXIO; - } - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(dev, "failed to allocate pwm_device\n"); - return -ENOMEM; - } - - pwm->pdev = pdev; - pwm->pwm_id = id; - - /* calculate base of control bits in TCON */ - pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4; - - pwm->clk = clk_get(dev, "pwm-tin"); - if (IS_ERR(pwm->clk)) { - dev_err(dev, "failed to get pwm tin clk\n"); - ret = PTR_ERR(pwm->clk); - goto err_alloc; - } - - pwm->clk_div = clk_get(dev, "pwm-tdiv"); - if (IS_ERR(pwm->clk_div)) { - dev_err(dev, "failed to get pwm tdiv clk\n"); - ret = PTR_ERR(pwm->clk_div); - goto err_clk_tin; - } - - clk_enable(pwm->clk); - clk_enable(pwm->clk_div); - - local_irq_save(flags); - - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_invert(pwm); - __raw_writel(tcon, S3C2410_TCON); - - local_irq_restore(flags); - - - ret = pwm_register(pwm); - if (ret) { - dev_err(dev, "failed to register pwm\n"); - goto err_clk_tdiv; - } - - pwm_dbg(pwm, "config bits %02x\n", - (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f); - - dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", - clk_get_rate(pwm->clk), - clk_get_rate(pwm->clk_div), - pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base); - - platform_set_drvdata(pdev, pwm); - return 0; - - err_clk_tdiv: - clk_disable(pwm->clk_div); - clk_disable(pwm->clk); - clk_put(pwm->clk_div); - - err_clk_tin: - clk_put(pwm->clk); - - err_alloc: - kfree(pwm); - return ret; -} - -static int __devexit s3c_pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - - clk_disable(pwm->clk_div); - clk_disable(pwm->clk); - clk_put(pwm->clk_div); - clk_put(pwm->clk); - kfree(pwm); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - - /* No one preserve these values during suspend so reset them - * Otherwise driver leaves PWM unconfigured if same values - * passed to pwm_config - */ - pwm->period_ns = 0; - pwm->duty_ns = 0; - - return 0; -} - -static int s3c_pwm_resume(struct platform_device *pdev) -{ - struct pwm_device *pwm = platform_get_drvdata(pdev); - unsigned long tcon; - - /* Restore invertion */ - tcon = __raw_readl(S3C2410_TCON); - tcon |= pwm_tcon_invert(pwm); - __raw_writel(tcon, S3C2410_TCON); - - return 0; -} - -#else -#define s3c_pwm_suspend NULL -#define s3c_pwm_resume NULL -#endif - -static struct platform_driver s3c_pwm_driver = { - .driver = { - .name = "s3c24xx-pwm", - .owner = THIS_MODULE, - }, - .probe = s3c_pwm_probe, - .remove = __devexit_p(s3c_pwm_remove), - .suspend = s3c_pwm_suspend, - .resume = s3c_pwm_resume, -}; - -static int __init pwm_init(void) -{ - int ret; - - clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); - clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); - - if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { - printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__); - return -EINVAL; - } - - ret = platform_driver_register(&s3c_pwm_driver); - if (ret) - printk(KERN_ERR "%s: failed to add pwm driver\n", __func__); - - return ret; -} - -arch_initcall(pwm_init); diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h index 0562f134621..9248e3a7e33 100644 --- a/arch/arm/plat-spear/include/plat/keyboard.h +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -149,6 +149,7 @@ int _name[] = { \ * keymap: pointer to keymap data (table and size) * rep: enables key autorepeat * mode: choose keyboard support(9x9, 6x6, 2x2) + * suspended_rate: rate at which keyboard would operate in suspended mode * * This structure is supposed to be used by platform code to supply * keymaps to drivers that implement keyboards. @@ -157,6 +158,7 @@ struct kbd_platform_data { const struct matrix_keymap_data *keymap; bool rep; unsigned int mode; + unsigned int suspended_rate; }; #endif /* __PLAT_KEYBOARD_H */ diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index 2bc6b54460a..eb6590ded40 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -14,8 +14,8 @@ #ifndef __PLAT_PL080_H #define __PLAT_PL080_H -struct pl08x_dma_chan; -int pl080_get_signal(struct pl08x_dma_chan *ch); -void pl080_put_signal(struct pl08x_dma_chan *ch); +struct pl08x_channel_data; +int pl080_get_signal(const struct pl08x_channel_data *cd); +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal); #endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index 12cf27f935f..cfa1199d0f4 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -27,9 +27,8 @@ struct { unsigned char val; } signals[16] = {{0, 0}, }; -int pl080_get_signal(struct pl08x_dma_chan *ch) +int pl080_get_signal(const struct pl08x_channel_data *cd) { - const struct pl08x_channel_data *cd = ch->cd; unsigned int signal = cd->min_signal, val; unsigned long flags; @@ -63,18 +62,17 @@ int pl080_get_signal(struct pl08x_dma_chan *ch) return signal; } -void pl080_put_signal(struct pl08x_dma_chan *ch) +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal) { - const struct pl08x_channel_data *cd = ch->cd; unsigned long flags; spin_lock_irqsave(&lock, flags); /* if signal is not used */ - if (!signals[cd->min_signal].busy) + if (!signals[signal].busy) BUG(); - signals[cd->min_signal].busy--; + signals[signal].busy--; spin_unlock_irqrestore(&lock, flags); } diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 49c7db48c7f..d7c5c171f5a 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -85,7 +85,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 4fa9903b83c..cc926c98598 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -7,18 +7,20 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Basic entry code, called from the kernel's undefined instruction trap. - * r0 = faulted instruction - * r5 = faulted PC+4 - * r9 = successful return - * r10 = thread_info structure - * lr = failure return */ #include <asm/thread_info.h> #include <asm/vfpmacros.h> #include "../kernel/entry-header.S" +@ VFP entry point. +@ +@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) +@ r2 = PC value to resume execution after successful emulation +@ r9 = normal "successful" return address +@ r10 = this threads thread_info structure +@ lr = unrecognised instruction return address +@ IRQs disabled. +@ ENTRY(do_vfp) #ifdef CONFIG_PREEMPT ldr r4, [r10, #TI_PREEMPT] @ get preempt count diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 2d30c7f6edd..ea0349f6358 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -16,6 +16,7 @@ */ #include <asm/thread_info.h> #include <asm/vfpmacros.h> +#include <linux/kern_levels.h> #include "../kernel/entry-header.S" .macro DBGSTR, str @@ -24,7 +25,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif @@ -37,7 +38,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif @@ -52,7 +53,7 @@ add r0, pc, #4 bl printk b 1f - .asciz "<7>VFP: \str\n" + .asciz KERN_DEBUG "VFP: \str\n" .balign 4 1: ldmfd sp!, {r0-r3, ip, lr} #endif @@ -61,13 +62,13 @@ @ VFP hardware support entry point. @ -@ r0 = faulted instruction -@ r2 = faulted PC+4 -@ r9 = successful return +@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) +@ r2 = PC value to resume execution after successful emulation +@ r9 = normal "successful" return address @ r10 = vfp_state union @ r11 = CPU number -@ lr = failure return - +@ lr = unrecognised instruction return address +@ IRQs enabled. ENTRY(vfp_support_entry) DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 @@ -161,9 +162,12 @@ vfp_hw_state_valid: @ exception before retrying branch @ out before setting an FPEXC that @ stops us reading stuff - VFPFMXR FPEXC, r1 @ restore FPEXC last - sub r2, r2, #4 - str r2, [sp, #S_PC] @ retry the instruction + VFPFMXR FPEXC, r1 @ Restore FPEXC last + sub r2, r2, #4 @ Retry current instruction - if Thumb + str r2, [sp, #S_PC] @ mode it's two 16-bit instructions, + @ else it's one 32-bit instruction, so + @ always subtract 4 from the following + @ instruction address. #ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 586961929e9..c834b32af27 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -457,10 +457,16 @@ static int vfp_pm_suspend(void) /* disable, just in case */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + } else if (vfp_current_hw_state[ti->cpu]) { +#ifndef CONFIG_SMP + fmxr(FPEXC, fpexc | FPEXC_EN); + vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); + fmxr(FPEXC, fpexc); +#endif } /* clear any information we had about last context state */ - memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state)); + vfp_current_hw_state[ti->cpu] = NULL; return 0; } @@ -713,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; |