diff options
Diffstat (limited to 'arch/arm')
43 files changed, 496 insertions, 679 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c6187..40fe514c23d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -647,6 +647,7 @@ config ARCH_TEGRA select MIGHT_HAVE_CACHE_L2X0 select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ + select USE_OF help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fc..f146dbf6f7f 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5ae..684a9e1ff7e 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd9..b797901d040 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -334,7 +334,7 @@ }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +397,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f..9de5636023f 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbd..be90544e6b5 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e902..59116b85243 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -164,7 +164,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +177,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec4..c169bced131 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b..19479393842 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -167,7 +167,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 6f6d13f91e4..e698ca016f7 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -207,6 +207,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_BACKLIGHT select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU @@ -326,6 +327,7 @@ config MACH_ORIGEN select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S3C_DEV_USB_HSOTG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -360,22 +362,26 @@ config MACH_SMDK4212 select S3C_DEV_I2C3 select S3C_DEV_I2C7 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_MFC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM select EXYNOS_DEV_SYSMMU select EXYNOS_DEV_DMA + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung SMDK4212 diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f5572be9d7b..9ed0229db8a 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -21,6 +21,7 @@ #include <linux/mfd/max8997.h> #include <linux/lcd.h> #include <linux/rfkill-gpio.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -499,6 +500,9 @@ static void __init origen_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat origen_hsotg_pdata; + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -655,6 +659,7 @@ static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_i2c0, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -744,6 +749,7 @@ static void __init origen_machine_init(void) origen_ehci_init(); origen_ohci_init(); + s3c_hsotg_set_platdata(&origen_hsotg_pdata); clk_xusbxti.rate = 24000000; s5p_tv_setup(); diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fb09c70e195..2623f3bde3f 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -13,12 +13,14 @@ #include <linux/i2c.h> #include <linux/input.h> #include <linux/io.h> +#include <linux/lcd.h> #include <linux/mfd/max8997.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/regulator/machine.h> #include <linux/serial_core.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -28,10 +30,12 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/keypad.h> #include <plat/mfc.h> +#include <plat/regs-fb.h> #include <plat/regs-serial.h> #include <plat/sdhci.h> @@ -219,8 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = { static uint32_t smdk4x12_keymap[] __initdata = { /* KEY(row, col, keycode) */ - KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), - KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) + KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), + KEY(1, 6, KEY_4), KEY(1, 7, KEY_5), + KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B), + KEY(0, 7, KEY_E), KEY(0, 5, KEY_C) }; static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { @@ -230,10 +236,41 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { .keymap_data = &smdk4x12_keymap_data, - .rows = 2, - .cols = 5, + .rows = 3, + .cols = 8, }; +static struct s3c_fb_pd_win smdk4x12_fb_win0 = { + .xres = 480, + .yres = 800, + .virtual_x = 480, + .virtual_y = 800 * 2, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct fb_videomode smdk4x12_lcd_timing = { + .left_margin = 8, + .right_margin = 8, + .upper_margin = 6, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 4, + .xres = 480, + .yres = 800, +}; + +static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = { + .win[0] = &smdk4x12_fb_win0, + .vtiming = &smdk4x12_lcd_timing, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + +/* USB OTG */ +static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; + static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -242,12 +279,14 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_i2c3, &s3c_device_i2c7, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, &s5p_device_fimc_md, + &s5p_device_fimd0, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -293,6 +332,10 @@ static void __init smdk4x12_machine_init(void) s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); + + s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); } diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 262e9e446a9..7464a45745d 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -19,6 +19,7 @@ #include <linux/i2c.h> #include <linux/input.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -271,6 +272,15 @@ static void __init smdkv310_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat smdkv310_hsotg_pdata; + +/* Audio device */ +static struct platform_device smdkv310_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -279,6 +289,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_i2c1, &s5p_device_i2c_hdmiphy, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -302,6 +313,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &samsung_asoc_dma, &samsung_asoc_idma, &s5p_device_fimd0, + &smdkv310_device_audio, &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, @@ -390,6 +402,7 @@ static void __init smdkv310_machine_init(void) smdkv310_ehci_init(); smdkv310_ohci_init(); + s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata); clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c262..a636cdc0887 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -189,6 +189,10 @@ endif # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o +ifneq ($(CONFIG_DRM_OMAP),) +obj-y += drm.o +endif + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 8e17284a803..ad8a7d94afc 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index ded100c80a9..97d719047af 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = { .power = &cm_t35_power_data, }; +#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) +#include <media/omap3isp.h> +#include "devices.h" + +static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("mt9t001", 0x5d), + }, + { + I2C_BOARD_INFO("tvp5150", 0x5c), + }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[0], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = { + { + .board_info = &cm_t35_isp_i2c_boardinfo[1], + .i2c_adapter_id = 3, + }, + { NULL, 0, }, +}; + +static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = { + { + .subdevs = cm_t35_isp_primary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 1, + }, + }, + }, + { + .subdevs = cm_t35_isp_secondary_subdevs, + .interface = ISP_INTERFACE_PARALLEL, + .bus = { + .parallel = { + .clk_pol = 0, + }, + }, + }, + { NULL, 0, }, +}; + +static struct isp_platform_data cm_t35_isp_pdata = { + .subdevs = cm_t35_isp_subdevs, +}; + +static void __init cm_t35_init_camera(void) +{ + if (omap3_init_camera(&cm_t35_isp_pdata) < 0) + pr_warn("CM-T3x: Failed registering camera device!\n"); +} + +#else +static inline void cm_t35_init_camera(void) {} +#endif /* CONFIG_VIDEO_OMAP3 */ + static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, @@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void) TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); + + omap_register_i2c_bus(3, 400, NULL, 0); } #ifdef CONFIG_OMAP_MUX @@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + /* Camera */ + OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), + /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void) usb_musb_init(NULL); cm_t35_init_usbh(); + cm_t35_init_camera(); } static void __init cm_t35_init(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 639bd07ea38..ef230a0eb5e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -24,6 +24,10 @@ #include <linux/leds.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> @@ -43,6 +47,7 @@ #include <plat/board.h> #include <plat/usb.h> +#include <plat/nand.h> #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> @@ -53,7 +58,6 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 @@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev, platform_device_register(&leds_gpio); + /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output + * for starting USB tranceiver + */ +#ifdef CONFIG_TWL4030_CORE + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { + u8 val; + + twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1); + val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */ + twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1); + } +#endif + return 0; } @@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { }; #endif +/* VAUX2 for USB */ +static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { + REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vaux2", NULL), +}; + +static struct regulator_init_data omap3evm_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies), + .consumer_supplies = omap3evm_vaux2_supplies, +}; + static struct twl4030_platform_data omap3evm_twldata = { /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, @@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; +static struct mtd_partition omap3evm_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14*(SZ_128K), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2*(SZ_128K) + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40*(SZ_128K) + }, + { + .name = "File system", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + static void __init omap3_evm_init(void) { struct omap_board_mux *obm; @@ -623,6 +693,9 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) + omap3evm_twldata.vaux2 = &omap3evm_vaux2; + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); @@ -656,6 +729,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions)); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982fb2622ab..b627cdc12b8 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), /* dispc2_data0 */ OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* NIRQ2 for twl6040 */ + OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | + OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1706ebcec08..4ba070e1288 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; +/* + * ADS7846 driver maybe request a gpio according to the value + * of pdata->get_pendown_state, but we have done this. So set + * get_pendown_state to avoid twice gpio requesting. + */ +static int omap3_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, + .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { @@ -63,14 +74,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - if (board_pdata && board_pdata->get_pendown_state) { + if (gpio_pendown) { err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); if (err) { pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); return; } - gpio_export(gpio_pendown, 0); + /* TS GPIOPendown doesn't allow user to change the direction */ + gpio_export(gpio_pendown, false); + + /* Set proper debouce time for ads7846. */ if (gpio_debounce) gpio_set_debounce(gpio_pendown, gpio_debounce); } diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836a..4c4ef6a6166 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,6 +4,7 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K +#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c new file mode 100644 index 00000000000..72e0f01b715 --- /dev/null +++ b/arch/arm/mach-omap2/drm.c @@ -0,0 +1,61 @@ +/* + * DRM/KMS device registration for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/omap_device.h> +#include <plat/omap_hwmod.h> + +#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) + +static struct platform_device omap_drm_device = { + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .name = "omapdrm", + .id = 0, +}; + +static int __init omap_init_drm(void) +{ + struct omap_hwmod *oh = NULL; + struct platform_device *pdev; + + /* lookup and populate the DMM information, if present - OMAP4+ */ + oh = omap_hwmod_lookup("dmm"); + + if (oh) { + pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0, + false); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", + oh->name); + } + + return platform_device_register(&omap_drm_device); + +} + +arch_initcall(omap_init_drm); + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 4cb2f951f1e..4c3c9994fc2 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -13,9 +13,7 @@ #include <linux/gpio.h> -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) -#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) +#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START #define PCA935X_GPIO_BASE GPIO_BOARD_START #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 7a27f5603c7..4645aa15c82 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -39,6 +39,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, + .irq = S3C_EINT(5), .controller_data = &wm0010_spi_csinfo, }, }; @@ -168,7 +169,6 @@ static struct wm8994_pdata wm8994_pdata = { .gpio_defaults = { 0x3, /* IRQ out, active high, CMOS */ }, - .irq_base = CODEC_IRQ_BASE, .ldo = { { .init_data = &wm8994_ldo1, }, { .init_data = &wm8994_ldo2, }, @@ -182,6 +182,11 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; +static const struct i2c_board_info wm5102_devs[] = { + { I2C_BOARD_INFO("wm5102", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, +}; + static const struct i2c_board_info wm6230_i2c_devs[] = { { I2C_BOARD_INFO("wm9081", 0x6c), .platform_data = &wm9081_pdata, }, @@ -209,6 +214,7 @@ static __devinitdata const struct { .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, { .id = 0x33, .name = "XXXX-EV1 Oban" }, + { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -218,6 +224,8 @@ static __devinitdata const struct { { .id = 0x3c, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, + { .id = 0x3e, .name = "WM5102-6271-EV1-CS127", + .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d0c352d861f..161c3b6218a 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -525,7 +525,6 @@ static struct wm831x_touch_pdata touch_pdata __initdata = { static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, - .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = BANFF_PMIC_GPIO_BASE, .soft_shutdown = true, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index df3103d450e..0fe4f1503f4 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = { static struct wm831x_pdata smdk6410_wm1192_pdata = { .pre_init = wm1192_pre_init, - .irq_base = IRQ_BOARD_START, .backlight = &wm1192_backlight_pdata, .dcdc = { diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 88e983b0c82..77185c38188 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -152,6 +152,7 @@ config MACH_SMDKV210 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -170,6 +171,7 @@ config MACH_SMDKV210 select S5PV210_SETUP_IDE select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY help Machine support for Samsung SMDKV210 diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index af528f9e97f..78028df86c5 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void) s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); }; +/* Audio device */ +static struct platform_device aquila_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, &aquila_i2c_gpio5, &aquila_device_gpiokeys, + &aquila_device_audio, &s3c_device_fb, &s5p_device_onenand, &s3c_device_hsmmc0, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index bf5087c2b7f..b2cae138786 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { .num_clients = ARRAY_SIZE(goni_camera_sensors), }; +/* Audio device */ +static struct platform_device goni_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, &goni_spi_gpio, &goni_i2c_gpio_pmic, &goni_i2c_gpio5, + &goni_device_audio, &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_mfc, diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0d7ddec88eb..c8997bce642 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/hardware/vic.h> #include <asm/mach/arch.h> @@ -47,6 +48,7 @@ #include <plat/backlight.h> #include <plat/regs-fb-v4.h> #include <plat/mfc.h> +#include <plat/clock.h> #include "common.h" @@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +/* USB OTG */ +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; + static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_ts, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, @@ -314,6 +320,9 @@ static void __init smdkv210_machine_init(void) samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); + clk_xusbxti.rate = 24000000; + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 6a113a9bb87..9077aaa398d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,40 +63,15 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform -config MACH_KAEN - bool "Kaen board" - depends on ARCH_TEGRA_2x_SOC - select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC - help - Support for the Kaen version of Seaboard - config MACH_PAZ00 bool "Paz00 board" depends on ARCH_TEGRA_2x_SOC help Support for the Toshiba AC100/Dynabook AZ netbook -config MACH_SEABOARD - bool "Seaboard board" - depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC - help - Support for nVidia Seaboard development platform. It will - also be included for some of the derivative boards that - have large similarities with the seaboard design. - -config MACH_TEGRA_DT - bool "Generic Tegra20 board (FDT support)" - depends on ARCH_TEGRA_2x_SOC - select USE_OF - help - Support for generic NVIDIA Tegra20 boards using Flattened Device Tree - config MACH_TRIMSLICE bool "TrimSlice board" depends on ARCH_TEGRA_2x_SOC @@ -104,20 +79,6 @@ config MACH_TRIMSLICE help Support for CompuLab TrimSlice platform -config MACH_WARIO - bool "Wario board" - depends on ARCH_TEGRA_2x_SOC - select MACH_SEABOARD - help - Support for the Wario version of Seaboard - -config MACH_VENTANA - bool "Ventana board" - depends on ARCH_TEGRA_2x_SOC - select MACH_TEGRA_DT - help - Support for the nVidia Ventana development platform - choice prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 2eb4445ddb1..1f6f237586e 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o @@ -23,6 +22,9 @@ obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o + obj-$(CONFIG_MACH_HARMONY) += board-harmony.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o @@ -31,14 +33,5 @@ obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o obj-$(CONFIG_MACH_PAZ00) += board-paz00.o obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o -obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o -obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o - -obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o -obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o - obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 9a82094092d..a369f96bd05 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -2,9 +2,9 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 -dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb -dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb -dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb -dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb -dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index eb7249db50a..d0de9c1192f 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -64,6 +64,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci2_pdata), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", &tegra_ehci3_pdata), + OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL), {} }; @@ -81,11 +82,6 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { NULL, NULL, 0, 0}, }; -static struct of_device_id tegra_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - {} -}; - static void __init tegra_dt_init(void) { tegra_clk_init_from_table(tegra_dt_clk_init_table); @@ -94,10 +90,74 @@ static void __init tegra_dt_init(void) * Finished with the static registrations now; fill in the missing * devices */ - of_platform_populate(NULL, tegra_dt_match_table, + of_platform_populate(NULL, of_default_bus_match_table, tegra20_auxdata_lookup, NULL); } +#ifdef CONFIG_MACH_TRIMSLICE +static void __init trimslice_init(void) +{ + int ret; + + ret = tegra_pcie_init(true, true); + if (ret) + pr_err("tegra_pci_init() failed: %d\n", ret); +} +#endif + +#ifdef CONFIG_MACH_HARMONY +static void __init harmony_init(void) +{ + int ret; + + ret = harmony_regulator_init(); + if (ret) { + pr_err("harmony_regulator_init() failed: %d\n", ret); + return; + } + + ret = harmony_pcie_init(); + if (ret) + pr_err("harmony_pcie_init() failed: %d\n", ret); +} +#endif + +#ifdef CONFIG_MACH_PAZ00 +static void __init paz00_init(void) +{ + tegra_paz00_wifikill_init(); +} +#endif + +static struct { + char *machine; + void (*init)(void); +} board_init_funcs[] = { +#ifdef CONFIG_MACH_TRIMSLICE + { "compulab,trimslice", trimslice_init }, +#endif +#ifdef CONFIG_MACH_HARMONY + { "nvidia,harmony", harmony_init }, +#endif +#ifdef CONFIG_MACH_PAZ00 + { "compal,paz00", paz00_init }, +#endif +}; + +static void __init tegra_dt_init_late(void) +{ + int i; + + tegra_init_late(); + + for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { + if (of_machine_is_compatible(board_init_funcs[i].machine)) { + board_init_funcs[i].init(); + break; + } + } +} + static const char *tegra20_dt_board_compat[] = { "nvidia,tegra20", NULL @@ -110,7 +170,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_dt_init, - .init_late = tegra_init_late, + .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, .dt_compat = tegra20_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 4f76fa7a5da..ee48214bfd8 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -36,11 +36,6 @@ #include "board.h" #include "clock.h" -static struct of_device_id tegra_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - {} -}; - struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL), @@ -52,6 +47,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), {} }; @@ -74,7 +70,7 @@ static void __init tegra30_dt_init(void) { tegra_clk_init_from_table(tegra_dt_clk_init_table); - of_platform_populate(NULL, tegra_dt_match_table, + of_platform_populate(NULL, of_default_bus_match_table, tegra30_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 33c4fedab84..e8c3fda9bec 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -27,14 +27,11 @@ #ifdef CONFIG_TEGRA_PCI -static int __init harmony_pcie_init(void) +int __init harmony_pcie_init(void) { struct regulator *regulator = NULL; int err; - if (!machine_is_harmony()) - return 0; - err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); if (err) return err; @@ -62,7 +59,15 @@ err_reg: return err; } +static int __init harmony_pcie_initcall(void) +{ + if (!machine_is_harmony()) + return 0; + + return harmony_pcie_init(); +} + /* PCI should be initialized after I2C, mfd and regulators */ -subsys_initcall_sync(harmony_pcie_init); +subsys_initcall_sync(harmony_pcie_initcall); #endif diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 82f32300796..44dcb2e869b 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -20,6 +20,10 @@ #include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/mfd/tps6586x.h> +#include <linux/of.h> +#include <linux/of_i2c.h> + +#include <asm/mach-types.h> #include <mach/irqs.h> @@ -110,7 +114,26 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { - i2c_register_board_info(3, harmony_regulators, 1); + if (machine_is_harmony()) { + i2c_register_board_info(3, harmony_regulators, 1); + } else { /* Harmony, booted using device tree */ + struct device_node *np; + struct i2c_adapter *adapter; + + np = of_find_node_by_path("/i2c@7000d000"); + if (np == NULL) { + pr_err("Could not find device_node for DVC I2C\n"); + return -ENODEV; + } + + adapter = of_find_i2c_adapter_by_node(np); + if (!adapter) { + pr_err("Could not find i2c_adapter for DVC I2C\n"); + return -ENODEV; + } + + i2c_new_device(adapter, harmony_regulators); + } return 0; } diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index bbc1907e98a..4b64af5cab2 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -148,7 +148,6 @@ static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device4, &tegra_sdhci_device1, - &wifi_rfkill_device, &leds_gpio, &gpio_keys_device, }; @@ -201,6 +200,11 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .is_8bit = 1, }; +void __init tegra_paz00_wifikill_init(void) +{ + platform_device_register(&wifi_rfkill_device); +} + static void __init tegra_paz00_init(void) { tegra_clk_init_from_table(paz00_clk_init_table); @@ -211,6 +215,7 @@ static void __init tegra_paz00_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); + tegra_paz00_wifikill_init(); paz00_i2c_init(); paz00_usb_init(); diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c deleted file mode 100644 index 11fc8a568c6..00000000000 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2010-2012 NVIDIA Corporation - * Copyright (C) 2011 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> - -#include "board-seaboard.h" -#include "board-pinmux.h" - -static unsigned long seaboard_pincfg_drive_sdio1[] = { - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3), - TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3), -}; - -static struct pinctrl_map common_map[] = { - TEGRA_MAP_MUXCONF("ata", "ide", none, driven), - TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("atc", "nand", none, driven), - TEGRA_MAP_MUXCONF("atd", "gmi", none, driven), - TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven), - TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", none, driven), - TEGRA_MAP_MUXCONF("crtp", "crt", up, tristate), - TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", none, tristate), - TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven), - TEGRA_MAP_MUXCONF("dap2", "dap2", none, driven), - TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate), - TEGRA_MAP_MUXCONF("dap4", "dap4", none, driven), - TEGRA_MAP_MUXCONF("dta", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtb", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtc", "vi", down, driven), - TEGRA_MAP_MUXCONF("dtd", "vi", down, driven), - TEGRA_MAP_MUXCONF("dte", "vi", down, tristate), - TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven), - TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gmb", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven), - TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven), - TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven), - TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven), - TEGRA_MAP_MUXCONF("gpv", "pcie", none, tristate), - TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven), - TEGRA_MAP_MUXCONF("irrx", "uartb", none, driven), - TEGRA_MAP_MUXCONF("irtx", "uartb", none, driven), - TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven), - TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven), - TEGRA_MAP_MUXCONF("lcsn", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven), - TEGRA_MAP_MUXCONF("ldc", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lm0", "rsvd4", na, driven), - TEGRA_MAP_MUXCONF("lm1", "crt", na, tristate), - TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw1", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsdi", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvp0", "rsvd4", na, tristate), - TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven), - TEGRA_MAP_MUXCONF("owc", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven), - TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven), - TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven), - TEGRA_MAP_MUXCONF("sdb", "sdio3", na, driven), - TEGRA_MAP_MUXCONF("sdc", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("sdd", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("sdio1", "sdio1", up, driven), - TEGRA_MAP_MUXCONF("slxa", "pcie", up, tristate), - TEGRA_MAP_MUXCONF("slxd", "spdif", none, driven), - TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven), - TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("spib", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spid", "spi1", none, tristate), - TEGRA_MAP_MUXCONF("spie", "spi1", none, tristate), - TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate), - TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate), - TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven), - TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("uad", "irda", none, driven), - TEGRA_MAP_MUXCONF("uca", "uartc", none, driven), - TEGRA_MAP_MUXCONF("ucb", "uartc", none, driven), - TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven), - TEGRA_MAP_CONF("ck32", none, na), - TEGRA_MAP_CONF("ddrc", none, na), - TEGRA_MAP_CONF("pmca", none, na), - TEGRA_MAP_CONF("pmcb", none, na), - TEGRA_MAP_CONF("pmcc", none, na), - TEGRA_MAP_CONF("pmcd", none, na), - TEGRA_MAP_CONF("pmce", none, na), - TEGRA_MAP_CONF("xm2c", none, na), - TEGRA_MAP_CONF("xm2d", none, na), - TEGRA_MAP_CONF("ls", up, na), - TEGRA_MAP_CONF("lc", up, na), - TEGRA_MAP_CONF("ld17_0", down, na), - TEGRA_MAP_CONF("ld19_18", down, na), - TEGRA_MAP_CONF("ld21_20", down, na), - TEGRA_MAP_CONF("ld23_22", down, na), -}; - -static struct pinctrl_map seaboard_map[] = { - TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, tristate), - TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven), - TEGRA_MAP_MUXCONF("lpw0", "hdmi", na, driven), - TEGRA_MAP_MUXCONF("lpw2", "hdmi", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("lsck", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "hdmi", na, tristate), - TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate), - TEGRA_MAP_MUXCONF("spia", "gmi", up, tristate), - TEGRA_MAP_MUXCONF("spic", "gmi", up, driven), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate), - PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1), -}; - -static struct pinctrl_map ventana_map[] = { - TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, driven), - TEGRA_MAP_MUXCONF("gmd", "sflash", none, tristate), - TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsc1", "displaya", na, driven), - TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate), - TEGRA_MAP_MUXCONF("slxc", "sdio3", none, driven), - TEGRA_MAP_MUXCONF("spia", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spic", "gmi", none, tristate), - TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate), -}; - -static struct tegra_board_pinmux_conf common_conf = { - .maps = common_map, - .map_count = ARRAY_SIZE(common_map), -}; - -static struct tegra_board_pinmux_conf seaboard_conf = { - .maps = seaboard_map, - .map_count = ARRAY_SIZE(seaboard_map), -}; - -static struct tegra_board_pinmux_conf ventana_conf = { - .maps = ventana_map, - .map_count = ARRAY_SIZE(ventana_map), -}; - -void seaboard_pinmux_init(void) -{ - tegra_board_pinmux_init(&common_conf, &seaboard_conf); -} - -void ventana_pinmux_init(void) -{ - tegra_board_pinmux_init(&common_conf, &ventana_conf); -} diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c deleted file mode 100644 index 71e9f3fc7fb..00000000000 --- a/arch/arm/mach-tegra/board-seaboard.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (c) 2010, 2011 NVIDIA Corporation. - * Copyright (C) 2010, 2011 Google, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/of_serial.h> -#include <linux/i2c.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_data/tegra_usb.h> - -#include <sound/wm8903.h> - -#include <mach/iomap.h> -#include <mach/irqs.h> -#include <mach/sdhci.h> -#include <mach/tegra_wm8903_pdata.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/hardware/gic.h> - -#include "board.h" -#include "board-seaboard.h" -#include "clock.h" -#include "devices.h" -#include "gpio-names.h" - -static struct plat_serial8250_port debug_uart_platform_data[] = { - { - /* Memory and IRQ filled in before registration */ - .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, - .type = PORT_TEGRA, - .handle_break = tegra_serial_handle_break, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 216000000, - }, { - .flags = 0, - } -}; - -static struct platform_device debug_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = debug_uart_platform_data, - }, -}; - -static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { - /* name parent rate enabled */ - { "uartb", "pll_p", 216000000, true}, - { "uartd", "pll_p", 216000000, true}, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { "usbd", "clk_m", 12000000, true}, - { "usb3", "clk_m", 12000000, true}, - { NULL, NULL, 0, 0}, -}; - -static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { - { - .code = SW_LID, - .gpio = TEGRA_GPIO_LIDSWITCH, - .active_low = 0, - .desc = "Lid", - .type = EV_SW, - .wakeup = 1, - .debounce_interval = 1, - }, - { - .code = KEY_POWER, - .gpio = TEGRA_GPIO_POWERKEY, - .active_low = 1, - .desc = "Power", - .type = EV_KEY, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data seaboard_gpio_keys = { - .buttons = seaboard_gpio_keys_buttons, - .nbuttons = ARRAY_SIZE(seaboard_gpio_keys_buttons), -}; - -static struct platform_device seaboard_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &seaboard_gpio_keys, - } -}; - -static struct tegra_sdhci_platform_data sdhci_pdata1 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata3 = { - .cd_gpio = TEGRA_GPIO_SD2_CD, - .wp_gpio = TEGRA_GPIO_SD2_WP, - .power_gpio = TEGRA_GPIO_SD2_POWER, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = -1, - .wp_gpio = -1, - .power_gpio = -1, - .is_8bit = 1, -}; - -static struct tegra_wm8903_platform_data seaboard_audio_pdata = { - .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, - .gpio_hp_det = TEGRA_GPIO_HP_DET, - .gpio_hp_mute = -1, - .gpio_int_mic_en = -1, - .gpio_ext_mic_en = -1, -}; - -static struct platform_device seaboard_audio_device = { - .name = "tegra-snd-wm8903", - .id = 0, - .dev = { - .platform_data = &seaboard_audio_pdata, - }, -}; - -static struct platform_device *seaboard_devices[] __initdata = { - &debug_uart, - &tegra_pmu_device, - &tegra_sdhci_device4, - &tegra_sdhci_device3, - &tegra_sdhci_device1, - &seaboard_gpio_keys_device, - &tegra_i2s_device1, - &tegra_das_device, - &seaboard_audio_device, -}; - -static struct i2c_board_info __initdata isl29018_device = { - I2C_BOARD_INFO("isl29018", 0x44), -}; - -static struct i2c_board_info __initdata adt7461_device = { - I2C_BOARD_INFO("adt7461", 0x4c), -}; - -static struct wm8903_platform_data wm8903_pdata = { - .irq_active_low = 0, - .micdet_cfg = 0, - .micdet_delay = 100, - .gpio_base = SEABOARD_GPIO_WM8903(0), - .gpio_cfg = { - 0, - 0, - WM8903_GPIO_CONFIG_ZERO, - 0, - 0, - }, -}; - -static struct i2c_board_info __initdata wm8903_device = { - I2C_BOARD_INFO("wm8903", 0x1a), - .platform_data = &wm8903_pdata, -}; - -static int seaboard_ehci_init(void) -{ - struct tegra_ehci_platform_data *pdata; - - pdata = tegra_ehci1_device.dev.platform_data; - pdata->vbus_gpio = TEGRA_GPIO_USB1; - - platform_device_register(&tegra_ehci1_device); - platform_device_register(&tegra_ehci3_device); - - return 0; -} - -static void __init seaboard_i2c_init(void) -{ - isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ); - i2c_register_board_info(0, &isl29018_device, 1); - - wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ); - i2c_register_board_info(0, &wm8903_device, 1); - - i2c_register_board_info(3, &adt7461_device, 1); - - platform_device_register(&tegra_i2c_device1); - platform_device_register(&tegra_i2c_device2); - platform_device_register(&tegra_i2c_device3); - platform_device_register(&tegra_i2c_device4); -} - -static void __init seaboard_common_init(void) -{ - seaboard_pinmux_init(); - - tegra_clk_init_from_table(seaboard_clk_init_table); - - tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3; - tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; - - platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices)); - - seaboard_ehci_init(); -} - -static void __init tegra_seaboard_init(void) -{ - /* Seaboard uses UARTD for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE; - debug_uart_platform_data[0].irq = INT_UARTD; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - -static void __init tegra_kaen_init(void) -{ - /* Kaen uses UARTB for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; - debug_uart_platform_data[0].irq = INT_UARTB; - - seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - -static void __init tegra_wario_init(void) -{ - /* Wario uses UARTB for the debug port. */ - debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); - debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; - debug_uart_platform_data[0].irq = INT_UARTB; - - seaboard_common_init(); - - seaboard_i2c_init(); -} - - -MACHINE_START(SEABOARD, "seaboard") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_seaboard_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END - -MACHINE_START(KAEN, "kaen") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_kaen_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END - -MACHINE_START(WARIO, "wario") - .atag_offset = 0x100, - .map_io = tegra_map_common_io, - .init_early = tegra20_init_early, - .init_irq = tegra_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_timer, - .init_machine = tegra_wario_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h deleted file mode 100644 index 4c45d4ca3c4..00000000000 --- a/arch/arm/mach-tegra/board-seaboard.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-tegra/board-seaboard.h - * - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_BOARD_SEABOARD_H -#define _MACH_TEGRA_BOARD_SEABOARD_H - -#include <mach/gpio-tegra.h> - -#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) -#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_)) - -#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 -#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 -#define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7 -#define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0 -#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2 -#define TEGRA_GPIO_BACKLIGHT TEGRA_GPIO_PD4 -#define TEGRA_GPIO_LVDS_SHUTDOWN TEGRA_GPIO_PB2 -#define TEGRA_GPIO_BACKLIGHT_PWM TEGRA_GPIO_PU5 -#define TEGRA_GPIO_BACKLIGHT_VDD TEGRA_GPIO_PW0 -#define TEGRA_GPIO_EN_VDD_PNL TEGRA_GPIO_PC6 -#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 -#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 -#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 -#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2) -#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 -#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2) -#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1 -#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5 - -void seaboard_pinmux_init(void); - -#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 65014968fc6..f88e5143c76 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -46,5 +46,14 @@ int __init tegra_powergate_debugfs_init(void); static inline int tegra_powergate_debugfs_init(void) { return 0; } #endif +int __init harmony_regulator_init(void); +#ifdef CONFIG_TEGRA_PCI +int __init harmony_pcie_init(void); +#else +static inline int harmony_pcie_init(void) { return 0; } +#endif + +void __init tegra_paz00_wifikill_init(void); + extern struct sys_timer tegra_timer; #endif diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index d83a8c0296f..566e2f88899 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -27,9 +27,9 @@ #include <linux/cpuidle.h> #include <linux/hrtimer.h> -#include <mach/iomap.h> +#include <asm/proc-fns.h> -extern void tegra_cpu_wfi(void); +#include <mach/iomap.h> static int tegra_idle_enter_lp3(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -64,7 +64,7 @@ static int tegra_idle_enter_lp3(struct cpuidle_device *dev, enter = ktime_get(); - tegra_cpu_wfi(); + cpu_do_idle(); exit = ktime_sub(ktime_get(), enter); us = ktime_to_us(exit); diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5b20197bae7..d29b156a801 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -62,32 +62,3 @@ movw \reg, #:lower16:\val movt \reg, #:upper16:\val .endm - -/* - * tegra_cpu_wfi - * - * puts current CPU in clock-gated wfi using the flow controller - * - * corrupts r0-r3 - * must be called with MMU on - */ - -ENTRY(tegra_cpu_wfi) - cpu_id r0 - cpu_to_halt_reg r1, r0 - cpu_to_csr_reg r2, r0 - mov32 r0, TEGRA_FLOW_CTRL_VIRT - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME - str r3, [r0, r1] @ put flow controller in wait irq mode - dsb - wfi - mov r3, #0 - str r3, [r0, r1] @ clear flow controller halt status - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - dsb - mov pc, lr -ENDPROC(tegra_cpu_wfi) - |