diff options
Diffstat (limited to 'arch/arm')
166 files changed, 2660 insertions, 2686 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64ba313724d..ad81ece7f82 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -145,8 +145,8 @@ machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 -machine-$(CONFIG_ARCH_MX1) := mx1 -machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX1) := imx +machine-$(CONFIG_ARCH_MX2) := imx machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_MX5) := mx5 diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 9236475e713..44cea2ddd22 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:31 2010 +# Fri May 28 19:15:48 2010 # CONFIG_ARM=y CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -186,9 +189,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -224,7 +229,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -233,6 +238,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -243,11 +249,18 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_SAMSUNG_CLKSRC=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S3C_GPIO_PULL_UP=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_ADC=y CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HWMON=y +CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y CONFIG_S3C_DMA=y @@ -260,6 +273,7 @@ CONFIG_PLAT_S3C24XX=y CONFIG_CPU_LLSERIAL_S3C2410=y CONFIG_CPU_LLSERIAL_S3C2440=y CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2443_CLOCK=y CONFIG_S3C24XX_DCLK=y CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=128 @@ -270,6 +284,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set CONFIG_MACH_SMDK=y CONFIG_S3C24XX_SIMTEC_AUDIO=y +CONFIG_S3C2410_SETUP_TS=y # # S3C2400 Machines @@ -289,6 +304,7 @@ CONFIG_ARCH_H1940=y # CONFIG_H1940BT is not set CONFIG_PM_H1940=y CONFIG_MACH_N30=y +CONFIG_MACH_N35=y CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y @@ -309,6 +325,13 @@ CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y +CONFIG_CPU_S3C2416=y +CONFIG_S3C2416_DMA=y + +# +# S3C2416 Machines +# +CONFIG_MACH_SMDK2416=y CONFIG_CPU_S3C2440=y CONFIG_CPU_S3C2442=y CONFIG_CPU_S3C244X=y @@ -320,9 +343,9 @@ CONFIG_S3C2440_DMA=y # S3C2440 and S3C2442 Machines # CONFIG_MACH_ANUBIS=y -# CONFIG_MACH_NEO1973_GTA02 is not set +CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_OSIRIS=y -# CONFIG_MACH_OSIRIS_DVS is not set +CONFIG_MACH_OSIRIS_DVS=m CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y @@ -330,6 +353,7 @@ CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_AT2440EVB=y CONFIG_MACH_MINI2440=y +CONFIG_MACH_RX1950=y CONFIG_CPU_S3C2443=y CONFIG_S3C2443_DMA=y @@ -410,6 +434,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -509,7 +534,9 @@ CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_VENO is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" @@ -566,6 +593,16 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m + +# +# Xtables targets +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_CT is not set @@ -577,9 +614,14 @@ CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m @@ -598,6 +640,7 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -605,7 +648,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -613,7 +655,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -713,6 +754,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +# CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set @@ -739,6 +781,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m +# CONFIG_BT_L2CAP_EXT_FEATURES is not set CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -775,6 +818,7 @@ CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -785,6 +829,7 @@ CONFIG_MAC80211_LEDS=y # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set +# CONFIG_CAIF is not set # # Device Drivers @@ -828,6 +873,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -882,9 +928,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -1149,6 +1198,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_MAX7359 is not set @@ -1212,6 +1262,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_S3C2410 is not set @@ -1248,6 +1299,7 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m @@ -1255,6 +1307,8 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF50633_PMU is not set +# CONFIG_INPUT_PCF8574 is not set CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # @@ -1287,6 +1341,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_N_HDLC is not set +# CONFIG_N_GSM is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_STALDRV is not set @@ -1324,6 +1379,8 @@ CONFIG_SERIAL_S3C2440=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1439,7 +1496,16 @@ CONFIG_GPIOLIB=y # AC97 GPIO expanders: # # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_CHARGER_PCF50633 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set @@ -1499,6 +1565,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set @@ -1555,7 +1622,7 @@ CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set -# CONFIG_TPS65010 is not set +CONFIG_TPS65010=m # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set @@ -1568,8 +1635,10 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set -# CONFIG_MFD_PCF50633 is not set +CONFIG_MFD_PCF50633=y # CONFIG_MFD_MC13783 is not set +# CONFIG_PCF50633_ADC is not set +CONFIG_PCF50633_GPIO=y # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_AB4500_CORE is not set @@ -1685,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y CONFIG_SND_S3C_I2SV2_SOC=m CONFIG_SND_S3C2412_SOC_I2S=m CONFIG_SND_S3C_SOC_AC97=m +# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m @@ -1836,10 +1906,12 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set +# CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1991,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_PCF50633 is not set # # on-CPU RTC drivers @@ -1999,10 +2072,6 @@ CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -2274,6 +2343,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -2284,6 +2354,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index a3a9993e5cd..2b642386f03 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,11 +1,14 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:32 2010 +# Fri May 28 19:05:39 2010 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -34,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -179,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -217,7 +223,7 @@ CONFIG_MMU=y CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -226,6 +232,7 @@ CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -247,11 +254,17 @@ CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set CONFIG_S3C_DEV_HSMMC=y CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DEV_HWMON=y CONFIG_S3C_DEV_I2C1=y CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HSOTG=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y +CONFIG_S3C_DEV_RTC=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y CONFIG_S3C_DMA=y # @@ -260,7 +273,9 @@ CONFIG_S3C_DMA=y # CONFIG_SAMSUNG_PM_DEBUG is not set # CONFIG_S3C_PM_DEBUG_LED_SMDK is not set # CONFIG_SAMSUNG_PM_CHECK is not set +CONFIG_SAMSUNG_WAKEMASK=y CONFIG_PLAT_S3C64XX=y +CONFIG_CPU_S3C6400=y CONFIG_CPU_S3C6410=y CONFIG_S3C64XX_DMA=y CONFIG_S3C64XX_SETUP_SDHCI=y @@ -268,15 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y CONFIG_S3C64XX_SETUP_I2C1=y CONFIG_S3C64XX_SETUP_FB_24BPP=y CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y -# CONFIG_MACH_SMDK6400 is not set -# CONFIG_MACH_ANW6410 is not set +CONFIG_MACH_SMDK6400=y +CONFIG_MACH_ANW6410=y CONFIG_MACH_SMDK6410=y CONFIG_SMDK6410_SD_CH0=y # CONFIG_SMDK6410_SD_CH1 is not set # CONFIG_SMDK6410_WM1190_EV1 is not set # CONFIG_SMDK6410_WM1192_EV1 is not set -# CONFIG_MACH_NCP is not set -# CONFIG_MACH_HMT is not set +CONFIG_MACH_NCP=y +CONFIG_MACH_HMT=y +CONFIG_MACH_SMARTQ=y +CONFIG_MACH_SMARTQ5=y +CONFIG_MACH_SMARTQ7=y # # Processor Type @@ -302,6 +320,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y @@ -352,6 +371,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -430,6 +450,7 @@ CONFIG_MTD=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -460,6 +481,9 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -472,9 +496,12 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -483,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -503,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -516,12 +545,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ISL29003 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set @@ -569,6 +600,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set @@ -635,9 +667,12 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C6400=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -673,6 +708,7 @@ CONFIG_I2C_S3C2410=y # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers @@ -682,7 +718,24 @@ CONFIG_I2C_S3C2410=y # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_S3C64XX=m +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # # PPS support @@ -714,6 +767,9 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set # # AC97 GPIO expanders: @@ -729,6 +785,7 @@ CONFIG_HWMON=y # # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -750,6 +807,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set @@ -764,6 +822,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -775,6 +834,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set @@ -788,9 +848,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -823,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -832,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C=y +# CONFIG_FB_S3C_DEBUG_REGWRITE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +CONFIG_LCD_LTV350QV=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y # # Display device support @@ -845,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y @@ -873,10 +979,16 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_S3C_SOC_AC97=m +# CONFIG_SND_S3C64XX_SOC_WM8580 is not set CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set @@ -886,29 +998,197 @@ CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y # CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +# CONFIG_HID_CANDO is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_PRODIKEYS is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EGALAX is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_ROCCAT_KONE is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # -# Enable Host or Gadget support to see Inventra options +# Miscellaneous USB options # +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QCAUX is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set +# CONFIG_USB_SERIAL_ZIO is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y CONFIG_MMC_DEBUG=y CONFIG_MMC_UNSAFE_RESUME=y @@ -928,18 +1208,80 @@ CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_SDHCI_S3C=y # CONFIG_MMC_SDHCI_S3C_DMA is not set +# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -1033,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Kernel hacking @@ -1096,6 +1477,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -1106,6 +1488,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig index 619bfab3ab3..532e987beb4 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p6440_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:18 2010 +# Wed May 26 19:04:32 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,15 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +287,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +339,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -490,7 +504,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -546,6 +562,8 @@ CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -593,6 +611,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -649,10 +668,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -850,6 +865,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -860,6 +876,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig index d7ea27509cf..068219b360f 100644 --- a/arch/arm/configs/s5p6442_defconfig +++ b/arch/arm/configs/s5p6442_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:19 2010 +# Wed May 26 19:04:34 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set CONFIG_ARCH_S5P6442=y -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6442=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,12 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +284,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +336,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -471,6 +482,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -525,6 +537,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -624,10 +638,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -836,6 +846,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -846,6 +857,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index 2053be6c9af..ebc6245b9fc 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Wed Jul 1 15:53:07 2009 +# Linux kernel version: 2.6.34 +# Wed May 26 19:04:35 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y -CONFIG_MMU=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,7 +20,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -31,6 +35,13 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -38,14 +49,15 @@ CONFIG_SWAP=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -59,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -80,19 +93,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -122,25 +137,56 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -156,6 +202,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -164,39 +211,64 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set CONFIG_ARCH_S5PC100=y +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_PLAT_S3C=y +# CONFIG_PLAT_SPEAR is not set +CONFIG_PLAT_SAMSUNG=y # # Boot options # # CONFIG_S3C_BOOT_ERROR_RESET is not set CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DEV_I2C1=y +CONFIG_S3C_DEV_FB=y +CONFIG_S3C_PL330_DMA=y # # Power management # -CONFIG_S3C_LOWLEVEL_UART_PORT=0 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y -CONFIG_S3C_GPIO_PULL_UPDOWN=y -CONFIG_PLAT_S5PC1XX=y -CONFIG_CPU_S5PC100_INIT=y -CONFIG_CPU_S5PC100_CLOCK=y -CONFIG_S5PC100_SETUP_I2C0=y +CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PC100=y +CONFIG_S5PC100_SETUP_FB_24BPP=y +CONFIG_S5PC100_SETUP_I2C1=y +CONFIG_S5PC100_SETUP_SDHCI=y +CONFIG_S5PC100_SETUP_SDHCI_GPIO=y CONFIG_MACH_SMDKC100=y # @@ -206,7 +278,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -224,11 +296,15 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -244,8 +320,11 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set @@ -258,12 +337,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -274,6 +352,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -317,6 +396,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -331,6 +411,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -338,9 +422,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -350,18 +437,21 @@ CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -369,6 +459,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -385,13 +476,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -399,6 +496,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -418,6 +516,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -444,11 +543,16 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS=3 +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -461,6 +565,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -471,9 +576,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -486,20 +593,15 @@ CONFIG_I2C_HELPER_AUTO=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -508,13 +610,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -523,10 +628,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -535,10 +649,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -549,6 +664,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -573,8 +689,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -584,9 +702,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -599,10 +716,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -610,10 +729,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -637,7 +761,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -680,13 +803,12 @@ CONFIG_SDIO_UART=y CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -710,6 +832,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -758,6 +881,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -772,7 +896,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -789,6 +912,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -826,11 +950,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -839,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -849,6 +976,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -857,8 +985,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y +# CONFIG_OC_ETM is not set CONFIG_DEBUG_S3C_UART=0 # @@ -867,7 +996,11 @@ CONFIG_DEBUG_S3C_UART=0 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set @@ -884,8 +1017,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig index 796cb78498c..c4de360b0f6 100644 --- a/arch/arm/configs/s5pc110_defconfig +++ b/arch/arm/configs/s5pc110_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:21 2010 +# Wed May 26 19:04:37 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,22 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set # CONFIG_MACH_SMDKV210 is not set CONFIG_MACH_SMDKC110=y @@ -281,12 +293,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +349,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,6 +496,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -536,6 +552,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +601,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +654,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +862,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +874,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 6831dab97d9..e2f5bce2982 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:22 2010 +# Wed May 26 19:04:39 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,24 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set CONFIG_MACH_SMDKV210=y # CONFIG_MACH_SMDKC110 is not set @@ -281,12 +295,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +351,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,7 +498,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -536,6 +555,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +604,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +657,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +865,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +877,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index bcda59f3994..2f87870d934 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -3,9 +3,6 @@ #include <asm/memory.h> #include <asm/types.h> - #include <asm-generic/scatterlist.h> -#undef ARCH_HAS_SG_CHAIN - #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index abd04932917..2ec3095ffb7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -17,6 +17,7 @@ #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> +#include <linux/mfd/tps6507x.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -24,6 +25,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/regulator/machine.h> +#include <linux/mfd/tps6507x.h> +#include <linux/input/tps6507x-ts.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -533,10 +536,24 @@ struct regulator_init_data tps65070_regulator_data[] = { }, }; +static struct touchscreen_init_data tps6507x_touchscreen_data = { + .poll_period = 30, /* ms between touch samples */ + .min_pressure = 0x30, /* minimum pressure to trigger touch */ + .vref = 0, /* turn off vref when not using A/D */ + .vendor = 0, /* /sys/class/input/input?/id/vendor */ + .product = 65070, /* /sys/class/input/input?/id/product */ + .version = 0x100, /* /sys/class/input/input?/id/version */ +}; + +static struct tps6507x_board tps_board = { + .tps6507x_pmic_init_data = &tps65070_regulator_data[0], + .tps6507x_ts_init_data = &tps6507x_touchscreen_data, +}; + static struct i2c_board_info __initdata da850evm_tps65070_info[] = { { I2C_BOARD_INFO("tps6507x", 0x48), - .platform_data = &tps65070_regulator_data[0], + .platform_data = &tps_board, }, }; diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h index 5a85e24f367..d4f1e967506 100644 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -22,6 +22,9 @@ struct davinci_mmc_config { /* Version of the MMC/SD controller */ u8 version; + + /* Number of sg segments */ + u8 nr_sg; }; void davinci_setup_mmc(int module, struct davinci_mmc_config *config); diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-imx/Kconfig index 3f756f4ad05..c5c0369bb48 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,42 +1,103 @@ +config IMX_HAVE_DMA_V1 + bool + +if ARCH_MX1 + +config SOC_IMX1 + select CPU_ARM920T + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + +comment "MX1 platforms:" +config MACH_MXLADS + bool + +config ARCH_MX1ADS + bool "MX1ADS platform" + select MACH_MXLADS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using Motorola MX1ADS/MXLADS boards + +config MACH_SCB9328 + bool "Synertronixx scb9328" + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using a Synertronixx scb9328 board + +endif + if ARCH_MX2 +config SOC_IMX21 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + +config SOC_IMX27 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + choice prompt "CPUs:" default MACH_MX21 config MACH_MX21 bool "i.MX21 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX21 help This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX27 help This enables support for Freescale's MX2 based i.MX27 processor. endchoice -comment "MX2 platforms:" +endif + +if MACH_MX21 + +comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" - depends on MACH_MX21 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. +endif + +if MACH_MX27 + +comment "MX27 platforms:" + config MACH_MX27ADS bool "MX27ADS platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for phyCORE-i.MX27 (aka pcm038) platform. This @@ -58,8 +119,9 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" - depends on MACH_MX27 - select MXC_ULPI if USB_ULPI + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. @@ -86,6 +148,8 @@ choice config MACH_EUKREA_MBIMX27_BASEBOARD prompt "Eukrea MBIMX27 development board" bool + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX help This adds board specific devices that can be found on Eukrea's MBIMX27 evaluation board. @@ -94,21 +158,24 @@ endchoice config MACH_MX27_3DS bool "MX27PDK platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for phyCARD-s (aka pca100) platform. This @@ -116,7 +183,9 @@ config MACH_PCA100 config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-imx/Makefile index 27d496c3e5c..46a9fdfbbd1 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -4,14 +4,24 @@ # Object file lists. -obj-y := devices.o serial.o +obj-y := devices.o -obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o +obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o -obj-$(CONFIG_MACH_MX27) += cpu_imx27.o pm-imx27.o -obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o +obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o +obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o + +obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o +obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o + +# Support for CMOS sensor interface +obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o + +obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o + obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index e867398a8fd..7988a85cf07 100644 --- a/arch/arm/mach-mx2/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,3 +1,7 @@ +zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 +params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 +initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 + zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c index 6cf2d4a7511..c05096c3830 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -2,18 +2,17 @@ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/kernel.h> @@ -29,7 +28,41 @@ #include <mach/clock.h> #include <mach/hardware.h> #include <mach/common.h> -#include "crm_regs.h" + +#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) + +/* CCM register addresses */ +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_PCDR IO_ADDR_CCM(0x20) + +#define CCM_CSCR_CLKO_OFFSET 29 +#define CCM_CSCR_CLKO_MASK (0x7 << 29) +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << 26) +#define CCM_CSCR_OSC_EN_SHIFT 17 +#define CCM_CSCR_SYSTEM_SEL (1 << 16) +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << 10) +#define CCM_CSCR_PRESC (1 << 15) + +#define CCM_PCDR_PCLK3_OFFSET 16 +#define CCM_PCDR_PCLK3_MASK (0x7f << 16) +#define CCM_PCDR_PCLK2_OFFSET 4 +#define CCM_PCDR_PCLK2_MASK (0xf << 4) +#define CCM_PCDR_PCLK1_OFFSET 0 +#define CCM_PCDR_PCLK1_MASK 0xf + +#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off))) + +/* SCM register addresses */ +#define SCM_GCCR IO_ADDR_SCM(0xc) + +#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 +#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 +#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 +#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 static int _clk_enable(struct clk *clk) { @@ -596,7 +629,8 @@ int __init mx1_clocks_init(unsigned long fref) clk_enable(&hclk); clk_enable(&fclk); - mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT); + mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), + MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c index bb419ef4d13..bb419ef4d13 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c index 5a1aa15c8a1..5a1aa15c8a1 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c index d8d3b2d84dc..d8d3b2d84dc 100644 --- a/arch/arm/mach-mx2/cpu_imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h new file mode 100644 index 00000000000..a8d94f07819 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx1.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx1.h> +#include <mach/devices-common.h> + +#define imx1_add_i2c_imx(pdata) \ + imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata) + +#define imx1_add_imx_uart0(pdata) \ + imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata) +#define imx1_add_imx_uart1(pdata) \ + imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h new file mode 100644 index 00000000000..42788e99d12 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx21.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx21.h> +#include <mach/devices-common.h> + +#define imx21_add_i2c_imx(pdata) \ + imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata) + +#define imx21_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata) +#define imx21_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata) +#define imx21_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata) +#define imx21_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata) + +#define imx21_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata) + +#define imx21_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata) +#define imx21_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h new file mode 100644 index 00000000000..65e7bb7ec2e --- /dev/null +++ b/arch/arm/mach-imx/devices-imx27.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx27.h> +#include <mach/devices-common.h> + +#define imx27_add_i2c_imx0(pdata) \ + imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata) +#define imx27_add_i2c_imx1(pdata) \ + imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata) + +#define imx27_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata) +#define imx27_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata) +#define imx27_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata) +#define imx27_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata) +#define imx27_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata) +#define imx27_add_imx_uart5(pdata) \ + imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata) + +#define imx27_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata) + +#define imx27_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata) +#define imx27_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata) +#define imx27_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c index 28caa21cb56..9c271a752b8 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -11,6 +11,9 @@ * * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -32,6 +35,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/dma-mapping.h> +#include <linux/serial.h> #include <mach/irqs.h> #include <mach/hardware.h> @@ -40,6 +44,150 @@ #include "devices.h" +#if defined(CONFIG_ARCH_MX1) +static struct resource imx1_camera_resources[] = { + { + .start = 0x00224000, + .end = 0x00224010, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_CSI_INT, + .end = MX1_CSI_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 imx1_camera_dmamask = DMA_BIT_MASK(32); + +struct platform_device imx1_camera_device = { + .name = "mx1-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &imx1_camera_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = imx1_camera_resources, + .num_resources = ARRAY_SIZE(imx1_camera_resources), +}; + +static struct resource imx_rtc_resources[] = { + { + .start = 0x00204000, + .end = 0x00204024, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_RTC_INT, + .end = MX1_RTC_INT, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_RTC_SAMINT, + .end = MX1_RTC_SAMINT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_rtc_device = { + .name = "rtc-imx", + .id = 0, + .resource = imx_rtc_resources, + .num_resources = ARRAY_SIZE(imx_rtc_resources), +}; + +static struct resource imx_wdt_resources[] = { + { + .start = 0x00201000, + .end = 0x00201008, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_WDT_INT, + .end = MX1_WDT_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_wdt_device = { + .name = "imx-wdt", + .id = 0, + .resource = imx_wdt_resources, + .num_resources = ARRAY_SIZE(imx_wdt_resources), +}; + +static struct resource imx_usb_resources[] = { + { + .start = 0x00212000, + .end = 0x00212148, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_USBD_INT0, + .end = MX1_USBD_INT0, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT1, + .end = MX1_USBD_INT1, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT2, + .end = MX1_USBD_INT2, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT3, + .end = MX1_USBD_INT3, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT4, + .end = MX1_USBD_INT4, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT5, + .end = MX1_USBD_INT5, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT6, + .end = MX1_USBD_INT6, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_usb_device = { + .name = "imx_udc", + .id = 0, + .num_resources = ARRAY_SIZE(imx_usb_resources), + .resource = imx_usb_resources, +}; + +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + { + .chip.label = "gpio-0", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), + .irq = MX1_GPIO_INT_PORTA, + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, { + .chip.label = "gpio-1", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100), + .irq = MX1_GPIO_INT_PORTB, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, { + .chip.label = "gpio-2", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200), + .irq = MX1_GPIO_INT_PORTC, + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, { + .chip.label = "gpio-3", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300), + .irq = MX1_GPIO_INT_PORTD, + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, + } +}; + +int __init imx1_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} +#endif + +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) + #ifdef CONFIG_MACH_MX27 static struct resource mx27_camera_resources[] = { { @@ -72,40 +220,6 @@ struct platform_device mx27_camera_device = { #endif /* - * SPI master controller - * - * - i.MX1: 2 channel (slighly different register setting) - * - i.MX21: 2 channel - * - i.MX27: 3 channel - */ -#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_spi_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device mxc_spi_device ## n = { \ - .name = "spi_imx", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \ - .resource = mxc_spi_resources ## n, \ - } - -DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1); -DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3); -#endif - -/* * General Purpose Timer * - i.MX21: 3 timers * - i.MX27: 6 timers @@ -171,34 +285,6 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \ - static struct resource pfx ## _nand_resources[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device pfx ## _nand_device = { \ - .name = "mxc_nand", \ - .id = 0, \ - .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \ - .resource = pfx ## _nand_resources, \ - } - -#ifdef CONFIG_MACH_MX21 -DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC); -#endif - -#ifdef CONFIG_MACH_MX27 -DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC); -#endif - /* * lcdc: * - i.MX1: the basic controller @@ -249,32 +335,6 @@ struct platform_device mxc_fec_device = { }; #endif -#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_i2c_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - } \ - }; \ - \ - struct platform_device mxc_i2c_device ## n = { \ - .name = "imx-i2c", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \ - .resource = mxc_i2c_resources ## n, \ - } - -DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2); -#endif - static struct resource mxc_pwm_resources[] = { { .start = MX2x_PWM_BASE_ADDR, @@ -485,26 +545,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); #ifdef CONFIG_MACH_MX21 DEFINE_MXC_GPIO_PORTS(MX21, imx21); + +int __init imx21_register_gpios(void) +{ + return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} #endif #ifdef CONFIG_MACH_MX27 DEFINE_MXC_GPIO_PORTS(MX27, imx27); -#endif -int __init mxc_register_gpios(void) +int __init imx27_register_gpios(void) { -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); - else -#endif - return 0; + return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); } +#endif #ifdef CONFIG_MACH_MX21 static struct resource mx21_usbhc_resources[] = { @@ -550,3 +605,5 @@ struct platform_device imx_kpp_device = { .num_resources = ARRAY_SIZE(imx_kpp_resources), .resource = imx_kpp_resources, }; + +#endif diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-imx/devices.h index aefc87a7609..efd4527506a 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -1,3 +1,11 @@ +#ifdef CONFIG_ARCH_MX1 +extern struct platform_device imx1_camera_device; +extern struct platform_device imx_rtc_device; +extern struct platform_device imx_wdt_device; +extern struct platform_device imx_usb_device; +#endif + +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; #ifdef CONFIG_MACH_MX27 @@ -6,26 +14,10 @@ extern struct platform_device mxc_gpt4; extern struct platform_device mxc_gpt5; #endif extern struct platform_device mxc_wdt; -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; -extern struct platform_device mxc_uart_device5; extern struct platform_device mxc_w1_master_device; -#ifdef CONFIG_MACH_MX21 -extern struct platform_device imx21_nand_device; -#endif -#ifdef CONFIG_MACH_MX27 -extern struct platform_device imx27_nand_device; -#endif extern struct platform_device mxc_fb_device; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; -extern struct platform_device mxc_i2c_device0; -#ifdef CONFIG_MACH_MX27 -extern struct platform_device mxc_i2c_device1; -#endif extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; extern struct platform_device mxc_otg_udc_device; @@ -33,12 +25,8 @@ extern struct platform_device mx27_camera_device; extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -#ifdef CONFIG_MACH_MX27 -extern struct platform_device mxc_spi_device2; -#endif extern struct platform_device mx21_usbhc_device; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; extern struct platform_device imx_kpp_device; +#endif diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c index e16014b0d13..fd1d9197d06 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-mxc/dma-mx1-mx2.c + * linux/arch/arm/plat-mxc/dma-v1.c * * i.MX DMA registration and IRQ dispatching * @@ -34,7 +34,7 @@ #include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> -#include <mach/dma-mx1-mx2.h> +#include <mach/dma-v1.h> #define DMA_DCR 0x00 /* Control Register */ #define DMA_DISR 0x04 /* Interrupt status Register */ diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index d66a6c43958..27e7226ec9d 100644 --- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -35,11 +35,11 @@ #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> -#include <mach/imx-uart.h> #include <mach/spi.h> #include <mach/ssi.h> #include <mach/audmux.h> +#include "devices-imx27.h" #include "devices.h" static int eukrea_mbimx27_pins[] = { @@ -247,16 +247,8 @@ static struct platform_device eukrea_mbimx27_lcd_powerdev = { .dev.platform_data = &eukrea_mbimx27_lcd_power_data, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, - { - .flags = IMXUART_HAVE_RTSCTS, - }, - { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; #if defined(CONFIG_TOUCHSCREEN_ADS7846) \ @@ -305,7 +297,7 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; -static struct spi_imx_master eukrea_mbimx27_spi_0_data = { +static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { .chipselect = eukrea_mbimx27_spi_cs, .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), }; @@ -353,10 +345,10 @@ void __init eukrea_mbimx27_baseboard_init(void) ); #endif - mxc_register_device(&mxc_uart_device1, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[1]); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); #if !defined(MACH_EUKREA_CPUIMX27_USEUART4) - mxc_register_device(&mxc_uart_device3, &uart_pdata[2]); + imx27_add_imx_uart3(&uart_pdata); #endif mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data); @@ -377,7 +369,7 @@ void __init eukrea_mbimx27_baseboard_init(void) #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data); + imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); #endif diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h new file mode 100644 index 00000000000..df5f522da6b --- /dev/null +++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h @@ -0,0 +1,10 @@ +#ifndef __MACH_DMA_MX1_MX2_H__ +#define __MACH_DMA_MX1_MX2_H__ +/* + * Don't use this header in new code, it will go away when all users are + * converted to mach/dma-v1.h + */ + +#include <mach/dma-v1.h> + +#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h index 7c4870bd5a2..287431cc13e 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/mach-imx/include/mach/dma-v1.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h + * linux/arch/arm/mach-imx/include/mach/dma-v1.h * * i.MX DMA registration and IRQ dispatching * @@ -22,8 +22,10 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_DMA_H -#define __ASM_ARCH_MXC_DMA_H +#ifndef __MACH_DMA_V1_H__ +#define __MACH_DMA_V1_H__ + +#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define IMX_DMA_CHANNELS 16 @@ -102,4 +104,4 @@ enum imx_dma_prio { int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); -#endif /* _ASM_ARCH_MXC_DMA_H */ +#endif /* __MACH_DMA_V1_H__ */ diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 55291787d5d..2a135449e52 100644 --- a/arch/arm/mach-mx2/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -38,13 +38,12 @@ #include <mach/board-eukrea_cpuimx27.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> #include <mach/iomux-mx27.h> -#include <mach/imx-uart.h> #include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx27.h" #include "devices.h" static int eukrea_cpuimx27_pins[] = { @@ -146,15 +145,12 @@ static struct platform_device eukrea_cpuimx27_nor_mtd_device = { .resource = &eukrea_cpuimx27_flash_resource, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = { +static const struct mxc_nand_platform_data +cpuimx27_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -166,7 +162,7 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, }; -static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = { +static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { .bitrate = 100000, }; @@ -256,15 +252,14 @@ static void __init eukrea_cpuimx27_init(void) mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + imx27_add_imx_uart0(&uart_pdata); - mxc_register_device(&imx27_nand_device, - &eukrea_cpuimx27_nand_board_info); + imx27_add_mxc_nand(&cpuimx27_nand_board_info); i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data); + imx27_add_i2c_imx1(&cpuimx27_i2c1_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); @@ -274,7 +269,7 @@ static void __init eukrea_cpuimx27_init(void) #endif #if defined(MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ - mxc_register_device(&mxc_uart_device3, &uart_pdata[1]); + imx27_add_imx_uart3(&uart_pdata); #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index b5710bf18b9..22a2b5d9121 100644 --- a/arch/arm/mach-mx2/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -26,10 +22,9 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27lite.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mx27lite_pins[] = { @@ -59,7 +54,7 @@ static unsigned int mx27lite_pins[] = { PF23_AIN_FEC_TX_EN, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -71,7 +66,7 @@ static void __init mx27lite_init(void) { mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 51f3cfd83db..77a760cfadc 100644 --- a/arch/arm/mach-mx1/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -26,10 +26,10 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx1.h> #include <mach/irqs.h> +#include "devices-imx1.h" #include "devices.h" static int mx1ads_pins[] = { @@ -58,12 +58,12 @@ static int mx1ads_pins[] = { * UARTs platform data */ -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart0_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxuart_platform_data uart1_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; /* @@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = { }; static struct resource flash_resource = { - .start = IMX_CS0_PHYS, - .end = IMX_CS0_PHYS + SZ_32M - 1, + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; @@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = { } }; -static struct imxi2c_platform_data mx1ads_i2c_data = { +static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = { .bitrate = 100000, }; @@ -121,8 +121,8 @@ static void __init mx1ads_init(void) ARRAY_SIZE(mx1ads_pins), "mx1ads"); /* UART */ - mxc_register_device(&imx_uart1_device, &uart_pdata[0]); - mxc_register_device(&imx_uart2_device, &uart_pdata[1]); + imx1_add_imx_uart0(&uart0_pdata); + imx1_add_imx_uart1(&uart1_pdata); /* Physmap flash */ mxc_register_device(&flash_device, &mx1ads_flash_data); @@ -131,7 +131,7 @@ static void __init mx1ads_init(void) i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); - mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); + imx1_add_i2c_imx(&mx1ads_i2c_data); } static void __init mx1ads_timer_init(void) @@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = IMX_IO_PHYS, - .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, @@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .phys_io = IMX_IO_PHYS, - .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 113e58d7cb4..96d7f8189f3 100644 --- a/arch/arm/mach-mx2/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -28,15 +24,49 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/imx-uart.h> #include <mach/imxfb.h> #include <mach/iomux-mx21.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> -#include <mach/board-mx21ads.h> +#include "devices-imx21.h" #include "devices.h" +/* + * Memory-mapped I/O on MX21ADS base board + */ +#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 +#define MX21ADS_MMIO_SIZE SZ_16M + +#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ + (MX21ADS_MMIO_BASE_ADDR + (offset)) + +#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) +#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) +#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) +#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP 0x0001 /* read */ +#define MX21ADS_IO_TP6 0x0001 /* write */ +#define MX21ADS_IO_SW_SEL 0x0002 /* read */ +#define MX21ADS_IO_TP7 0x0002 /* write */ +#define MX21ADS_IO_RESET_E_UART 0x0004 +#define MX21ADS_IO_RESET_BASE 0x0008 +#define MX21ADS_IO_CSI_CTL2 0x0010 +#define MX21ADS_IO_CSI_CTL1 0x0020 +#define MX21ADS_IO_CSI_CTL0 0x0040 +#define MX21ADS_IO_UART1_EN 0x0080 +#define MX21ADS_IO_UART4_EN 0x0100 +#define MX21ADS_IO_LCDON 0x0200 +#define MX21ADS_IO_IRDA_EN 0x0400 +#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 +#define MX21ADS_IO_IRDA_MD0_B 0x1000 +#define MX21ADS_IO_IRDA_MD1 0x2000 +#define MX21ADS_IO_LED4_ON 0x4000 +#define MX21ADS_IO_LED3_ON 0x8000 + static unsigned int mx21ads_pins[] = { /* CS8900A */ @@ -133,14 +163,13 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata_rts __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxuart_platform_data uart_norts_pdata = { +static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; - static int mx21ads_fb_init(struct platform_device *pdev) { u16 tmp; @@ -227,7 +256,8 @@ static struct imxmmc_platform_data mx21ads_sdhc_pdata = { .exit = mx21ads_sdhc_exit, }; -static struct mxc_nand_platform_data mx21ads_nand_board_info = { +static const struct mxc_nand_platform_data +mx21ads_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -263,12 +293,12 @@ static void __init mx21ads_board_init(void) mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); - mxc_register_device(&mxc_uart_device3, &uart_pdata); + imx21_add_imx_uart0(&uart_pdata_rts); + imx21_add_imx_uart2(&uart_pdata_norts); + imx21_add_imx_uart3(&uart_pdata_rts); mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); - mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info); + imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index b2f4e0db3fb..e2a82bab012 100644 --- a/arch/arm/mach-mx2/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -12,10 +12,12 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This machine is known as: + * - i.MX27 3-Stack Development System + * - i.MX27 Platform Development Kit (i.MX27 PDK) */ #include <linux/platform_device.h> @@ -25,10 +27,9 @@ #include <asm/mach/time.h> #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27pdk.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mx27pdk_pins[] = { @@ -58,7 +59,7 @@ static unsigned int mx27pdk_pins[] = { PF23_AIN_FEC_TX_EN, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -70,7 +71,7 @@ static void __init mx27pdk_init(void) { mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 6ce323669e5..9c77da98a10 100644 --- a/arch/arm/mach-mx2/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -32,16 +28,44 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27ads.h> #include <mach/mxc_nand.h> -#include <mach/i2c.h> #include <mach/imxfb.h> #include <mach/mmc.h> +#include "devices-imx27.h" #include "devices.h" +/* + * Base address of PBC controller, CS4 + */ +#define PBC_BASE_ADDRESS 0xf4300000 +#define PBC_REG_ADDR(offset) (void __force __iomem *) \ + (PBC_BASE_ADDRESS + (offset)) + +/* When the PBC address connection is fixed in h/w, defined as 1 */ +#define PBC_ADDR_SH 0 + +/* Offsets for the PBC Controller register */ +/* + * PBC Board version register offset + */ +#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) + +/* PBC Board Control Register 1 bit definitions */ +#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ + +/* to determine the correct external crystal reference */ +#define CKIH_27MHZ_BIT_SET (1 << 3) + static unsigned int mx27ads_pins[] = { /* UART0 */ PE12_PF_UART1_TXD, @@ -141,7 +165,8 @@ static unsigned int mx27ads_pins[] = { PB9_PF_SD2_CLK, }; -static struct mxc_nand_platform_data mx27ads_nand_board_info = { +static const struct mxc_nand_platform_data +mx27ads_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -168,7 +193,7 @@ static struct platform_device mx27ads_nor_mtd_device = { .resource = &mx27ads_flash_resource, }; -static struct imxi2c_platform_data mx27ads_i2c_data = { +static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { .bitrate = 100000, }; @@ -263,20 +288,8 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; static void __init mx27ads_board_init(void) @@ -284,18 +297,18 @@ static void __init mx27ads_board_init(void) mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); - mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); - mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); - mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); + imx27_add_imx_uart3(&uart_pdata); + imx27_add_imx_uart4(&uart_pdata); + imx27_add_imx_uart5(&uart_pdata); + imx27_add_mxc_nand(&mx27ads_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + imx27_add_i2c_imx1(&mx27ads_i2c1_data); mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); @@ -342,4 +355,3 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .init_machine = mx27ads_board_init, .timer = &mx27ads_timer, MACHINE_END - diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index bc385599267..a3a1e452d4c 100644 --- a/arch/arm/mach-mx2/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -32,14 +28,13 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <linux/gpio.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> -#include <mach/i2c.h> #include <linux/i2c/pca953x.h> #include <mach/imxfb.h> #include <mach/mmc.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mxt_td60_pins[] __initdata = { @@ -128,12 +123,13 @@ static unsigned int mxt_td60_pins[] __initdata = { PB9_PF_SD2_CLK, }; -static struct mxc_nand_platform_data mxt_td60_nand_board_info = { +static const struct mxc_nand_platform_data +mxt_td60_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; -static struct imxi2c_platform_data mxt_td60_i2c_data = { +static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = { .bitrate = 100000, }; @@ -173,7 +169,7 @@ static struct i2c_board_info mxt_td60_i2c_devices[] = { }, }; -static struct imxi2c_platform_data mxt_td60_i2c2_data = { +static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = { .bitrate = 100000, }; @@ -239,14 +235,8 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_fec_device, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; static void __init mxt_td60_board_init(void) @@ -254,10 +244,10 @@ static void __init mxt_td60_board_init(void) mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); + imx27_add_mxc_nand(&mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, ARRAY_SIZE(mxt_td60_i2c_devices)); @@ -265,8 +255,8 @@ static void __init mxt_td60_board_init(void) i2c_register_board_info(1, mxt_td60_i2c2_devices, ARRAY_SIZE(mxt_td60_i2c2_devices)); - mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data); - mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data); + imx27_add_i2c_imx0(&mxt_td60_i2c0_data); + imx27_add_i2c_imx1(&mxt_td60_i2c1_data); mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 2164b7f96ef..6c92deaf468 100644 --- a/arch/arm/mach-mx2/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,12 +36,7 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx27.h> -#include <mach/i2c.h> #include <asm/mach/time.h> -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) -#include <mach/spi.h> -#endif -#include <mach/imx-uart.h> #include <mach/audmux.h> #include <mach/ssi.h> #include <mach/mxc_nand.h> @@ -51,6 +46,7 @@ #include <mach/ulpi.h> #include <mach/imxfb.h> +#include "devices-imx27.h" #include "devices.h" #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) @@ -166,11 +162,12 @@ static int pca100_pins[] = { GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */ }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data pca100_nand_board_info = { +static const struct mxc_nand_platform_data +pca100_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -181,7 +178,7 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_wdt, }; -static struct imxi2c_platform_data pca100_i2c_1_data = { +static const struct imxi2c_platform_data pca100_i2c1_data __initconst = { .bitrate = 100000, }; @@ -224,7 +221,7 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = { static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1}; -static struct spi_imx_master pca100_spi_0_data = { +static const struct spi_imx_master pca100_spi0_data __initconst = { .chipselect = pca100_spi_cs, .num_chipselect = ARRAY_SIZE(pca100_spi_cs), }; @@ -394,24 +391,24 @@ static void __init pca100_init(void) mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); - mxc_register_device(&imx27_nand_device, &pca100_nand_board_info); + imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data); + imx27_add_i2c_imx1(&pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); - mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); + imx27_add_spi_imx0(&pca100_spi_0_data); #endif gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 36c89431679..9212e8f3700 100644 --- a/arch/arm/mach-mx2/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -35,14 +35,12 @@ #include <mach/board-pcm038.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> #include <mach/iomux-mx27.h> -#include <mach/imx-uart.h> #include <mach/mxc_nand.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx27.h" #include "devices.h" static int pcm038_pins[] = { @@ -162,17 +160,12 @@ static struct platform_device pcm038_nor_mtd_device = { .resource = &pcm038_flash_resource, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data pcm038_nand_board_info = { +static const struct mxc_nand_platform_data +pcm038_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -192,7 +185,7 @@ static void __init pcm038_init_sram(void) mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); } -static struct imxi2c_platform_data pcm038_i2c_1_data = { +static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { .bitrate = 100000, }; @@ -215,7 +208,7 @@ static struct i2c_board_info pcm038_i2c_devices[] = { static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; -static struct spi_imx_master pcm038_spi_0_data = { +static const struct spi_imx_master pcm038_spi0_data __initconst = { .chipselect = pcm038_spi_cs, .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), }; @@ -305,18 +298,18 @@ static void __init pcm038_init(void) pcm038_init_sram(); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); mxc_gpio_mode(PE16_AF_OWIRE); - mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info); + imx27_add_mxc_nand(&pcm038_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); + imx27_add_i2c_imx1(&pcm038_i2c1_data); /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); @@ -326,7 +319,7 @@ static void __init pcm038_init(void) /* MC13783 IRQ */ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + imx27_add_spi_imx0(&pcm038_spi0_data); spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 7587a7a1246..88bf0d1e26e 100644 --- a/arch/arm/mach-mx1/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -22,17 +22,17 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx1.h> +#include "devices-imx1.h" #include "devices.h" /* * This scb9328 has a 32MiB flash */ static struct resource flash_resource = { - .start = IMX_CS0_PHYS, - .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1, + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, .flags = IORESOURCE_MEM, }; @@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = { static struct resource dm9000x_resources[] = { { .name = "address area", - .start = IMX_CS5_PHYS, - .end = IMX_CS5_PHYS + 1, + .start = MX1_CS5_PHYS, + .end = MX1_CS5_PHYS + 1, .flags = IORESOURCE_MEM, /* address access */ }, { .name = "data area", - .start = IMX_CS5_PHYS + 4, - .end = IMX_CS5_PHYS + 5, + .start = MX1_CS5_PHYS + 4, + .end = MX1_CS5_PHYS + 5, .flags = IORESOURCE_MEM, /* data access */ }, { .start = IRQ_GPIOC(3), @@ -108,14 +108,13 @@ static int uart1_mxc_init(struct platform_device *pdev) ARRAY_SIZE(mxc_uart1_pins), "UART1"); } -static int uart1_mxc_exit(struct platform_device *pdev) +static void uart1_mxc_exit(struct platform_device *pdev) { mxc_gpio_release_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins)); - return 0; } -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .init = uart1_mxc_init, .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, @@ -131,7 +130,7 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { - mxc_register_device(&imx_uart1_device, &uart_pdata); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c index 7f9fc1034c0..117ebf6bc95 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -3,7 +3,7 @@ * Created: april 20th, 2004 * Copyright: Synertronixx GmbH * - * Common code for i.MX machines + * Common code for i.MX1 machines * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> #include <linux/init.h> @@ -31,23 +26,25 @@ static struct map_desc imx_io_desc[] __initdata = { { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE + .virtual = MX1_IO_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR), + .length = MX1_IO_SIZE, + .type = MT_DEVICE } }; void __init mx1_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX1); - mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR)); + mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } +int imx1_register_gpios(void); + void __init mx1_init_irq(void) { - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); + imx1_register_gpios(); + mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); } - diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 64134314d01..68aa5d2ecdb 100644 --- a/arch/arm/mach-mx2/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-mx2/mm-imx21.c + * arch/arm/mach-imx/mm-imx21.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -77,7 +77,10 @@ void __init mx21_map_io(void) iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); } +int imx21_register_gpios(void); + void __init mx21_init_irq(void) { + imx21_register_gpios(); mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); } diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 3366ed44cfd..bcedce9c87d 100644 --- a/arch/arm/mach-mx2/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-mx2/mm-imx27.c + * arch/arm/mach-imx/mm-imx27.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -77,7 +77,10 @@ void __init mx27_map_io(void) iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); } +int imx27_register_gpios(void); + void __init mx27_init_irq(void) { + imx27_register_gpios(); mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c index b09ee12a4ff..b09ee12a4ff 100644 --- a/arch/arm/mach-mx1/ksym_mx1.c +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S index 9c69aa65bf1..9c69aa65bf1 100644 --- a/arch/arm/mach-mx1/mx1_camera_fiq.S +++ b/arch/arm/mach-imx/mx1-camera-fiq.S diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index f490a406d57..f490a406d57 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c diff --git a/arch/arm/mach-mx2/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index afc17ce0bb5..afc17ce0bb5 100644 --- a/arch/arm/mach-mx2/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig deleted file mode 100644 index eb7660f5d4b..00000000000 --- a/arch/arm/mach-mx1/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -if ARCH_MX1 - -comment "MX1 platforms:" - -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select MACH_MXLADS - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards - -config MACH_SCB9328 - bool "Synertronixx scb9328" - help - Say Y here if you are using a Synertronixx scb9328 board - -endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile deleted file mode 100644 index fc2ddf82441..00000000000 --- a/arch/arm/mach-mx1/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS -obj-y += generic.o clock.o devices.o - -# Support for CMOS sensor interface -obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot deleted file mode 100644 index 8ed1492288a..00000000000 --- a/arch/arm/mach-mx1/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y := 0x08008000 -params_phys-y := 0x08000100 -initrd_phys-y := 0x08800000 - diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h deleted file mode 100644 index 22e866ff0c0..00000000000 --- a/arch/arm/mach-mx1/crm_regs.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This file may be distributed under the terms of the GNU General - * Public License, version 2. - */ - -#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__ -#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__ - -#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) -#define SCM_BASE IO_ADDRESS(SCM_BASE_ADDR) - -/* CCM register addresses */ -#define CCM_CSCR (CCM_BASE + 0x0) -#define CCM_MPCTL0 (CCM_BASE + 0x4) -#define CCM_MPCTL1 (CCM_BASE + 0x8) -#define CCM_SPCTL0 (CCM_BASE + 0xC) -#define CCM_SPCTL1 (CCM_BASE + 0x10) -#define CCM_PCDR (CCM_BASE + 0x20) - -#define CCM_CSCR_CLKO_OFFSET 29 -#define CCM_CSCR_CLKO_MASK (0x7 << 29) -#define CCM_CSCR_USB_OFFSET 26 -#define CCM_CSCR_USB_MASK (0x7 << 26) -#define CCM_CSCR_SPLL_RESTART (1 << 22) -#define CCM_CSCR_MPLL_RESTART (1 << 21) -#define CCM_CSCR_OSC_EN_SHIFT 17 -#define CCM_CSCR_SYSTEM_SEL (1 << 16) -#define CCM_CSCR_BCLK_OFFSET 10 -#define CCM_CSCR_BCLK_MASK (0xF << 10) -#define CCM_CSCR_PRESC (1 << 15) -#define CCM_CSCR_SPEN (1 << 1) -#define CCM_CSCR_MPEN (1 << 0) - -#define CCM_PCDR_PCLK3_OFFSET 16 -#define CCM_PCDR_PCLK3_MASK (0x7F << 16) -#define CCM_PCDR_PCLK2_OFFSET 4 -#define CCM_PCDR_PCLK2_MASK (0xF << 4) -#define CCM_PCDR_PCLK1_OFFSET 0 -#define CCM_PCDR_PCLK1_MASK 0xF - -/* SCM register addresses */ -#define SCM_SIDR (SCM_BASE + 0x0) -#define SCM_FMCR (SCM_BASE + 0x4) -#define SCM_GPCR (SCM_BASE + 0x8) -#define SCM_GCCR (SCM_BASE + 0xC) - -#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 -#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 -#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 -#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 - -#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c deleted file mode 100644 index b6be29d1cb0..00000000000 --- a/arch/arm/mach-mx1/devices.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <mach/irqs.h> -#include <mach/hardware.h> - -#include "devices.h" - -static struct resource imx_csi_resources[] = { - { - .start = 0x00224000, - .end = 0x00224010, - .flags = IORESOURCE_MEM, - }, { - .start = CSI_INT, - .end = CSI_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imx_csi_dmamask = 0xffffffffUL; - -struct platform_device imx_csi_device = { - .name = "mx1-camera", - .id = 0, /* This is used to put cameras on this interface */ - .dev = { - .dma_mask = &imx_csi_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = imx_csi_resources, - .num_resources = ARRAY_SIZE(imx_csi_resources), -}; - -static struct resource imx_i2c_resources[] = { - { - .start = 0x00217000, - .end = 0x00217010, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_INT, - .end = I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_i2c_device = { - .name = "imx-i2c", - .id = 0, - .resource = imx_i2c_resources, - .num_resources = ARRAY_SIZE(imx_i2c_resources), -}; - -static struct resource imx_uart1_resources[] = { - { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0xD0, - .flags = IORESOURCE_MEM, - }, { - .start = UART1_MINT_RX, - .end = UART1_MINT_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART1_MINT_TX, - .end = UART1_MINT_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, -}; - -static struct resource imx_uart2_resources[] = { - { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0xD0, - .flags = IORESOURCE_MEM, - }, { - .start = UART2_MINT_RX, - .end = UART2_MINT_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART2_MINT_TX, - .end = UART2_MINT_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, -}; - -static struct resource imx_rtc_resources[] = { - { - .start = 0x00204000, - .end = 0x00204024, - .flags = IORESOURCE_MEM, - }, { - .start = RTC_INT, - .end = RTC_INT, - .flags = IORESOURCE_IRQ, - }, { - .start = RTC_SAMINT, - .end = RTC_SAMINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device = { - .name = "rtc-imx", - .id = 0, - .resource = imx_rtc_resources, - .num_resources = ARRAY_SIZE(imx_rtc_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .start = 0x00201000, - .end = 0x00201008, - .flags = IORESOURCE_MEM, - }, { - .start = WDT_INT, - .end = WDT_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_wdt_device = { - .name = "imx-wdt", - .id = 0, - .resource = imx_wdt_resources, - .num_resources = ARRAY_SIZE(imx_wdt_resources), -}; - -static struct resource imx_usb_resources[] = { - { - .start = 0x00212000, - .end = 0x00212148, - .flags = IORESOURCE_MEM, - }, { - .start = USBD_INT0, - .end = USBD_INT0, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT1, - .end = USBD_INT1, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT2, - .end = USBD_INT2, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT3, - .end = USBD_INT3, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT4, - .end = USBD_INT4, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT5, - .end = USBD_INT5, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT6, - .end = USBD_INT6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_usb_device = { - .name = "imx_udc", - .id = 0, - .num_resources = ARRAY_SIZE(imx_usb_resources), - .resource = imx_usb_resources, -}; - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR), - .irq = GPIO_INT_PORTA, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100), - .irq = GPIO_INT_PORTB, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200), - .irq = GPIO_INT_PORTC, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300), - .irq = GPIO_INT_PORTD, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - } -}; - -int __init mxc_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h deleted file mode 100644 index 0da5d7cce3a..00000000000 --- a/arch/arm/mach-mx1/devices.h +++ /dev/null @@ -1,7 +0,0 @@ -extern struct platform_device imx_csi_device; -extern struct platform_device imx_i2c_device; -extern struct platform_device imx_uart1_device; -extern struct platform_device imx_uart2_device; -extern struct platform_device imx_rtc_device; -extern struct platform_device imx_wdt_device; -extern struct platform_device imx_usb_device; diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c deleted file mode 100644 index 1c0c835b225..00000000000 --- a/arch/arm/mach-mx2/serial.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <mach/hardware.h> -#include <mach/imx-uart.h> -#include "devices.h" - -static struct resource uart0[] = { - { - .start = MX2x_UART1_BASE_ADDR, - .end = MX2x_UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART1, - .end = MX2x_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX2x_UART2_BASE_ADDR, - .end = MX2x_UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART2, - .end = MX2x_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX2x_UART3_BASE_ADDR, - .end = MX2x_UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART3, - .end = MX2x_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource uart3[] = { - { - .start = MX2x_UART4_BASE_ADDR, - .end = MX2x_UART4_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART4, - .end = MX2x_INT_UART4, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -#ifdef CONFIG_MACH_MX27 -static struct resource uart4[] = { - { - .start = MX27_UART5_BASE_ADDR, - .end = MX27_UART5_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_UART5, - .end = MX27_INT_UART5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; - -static struct resource uart5[] = { - { - .start = MX27_UART6_BASE_ADDR, - .end = MX27_UART6_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_UART6, - .end = MX27_INT_UART6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device5 = { - .name = "imx-uart", - .id = 5, - .resource = uart5, - .num_resources = ARRAY_SIZE(uart5), -}; -#endif diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index 3a6668eebf9..67e0b54218a 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -4,9 +4,14 @@ comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND config MACH_EUKREA_CPUIMX25 bool "Support Eukrea CPUIMX25 Platform" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI choice diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile index 83ab5d80510..87ffb9c2f90 100644 --- a/arch/arm/mach-mx25/Makefile +++ b/arch/arm/mach-mx25/Makefile @@ -1,5 +1,5 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX25) += clock.o -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o +obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h new file mode 100644 index 00000000000..2025cb947fc --- /dev/null +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx25.h> +#include <mach/devices-common.h> + +#define imx25_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata) +#define imx25_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata) +#define imx25_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata) + +#define imx25_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata) +#define imx25_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata) +#define imx25_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata) +#define imx25_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata) +#define imx25_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata) + +#define imx25_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata) + +#define imx25_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata) +#define imx25_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata) +#define imx25_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 82d3e53f01f..3468eb15b23 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -22,101 +22,6 @@ #include <mach/mx25.h> #include <mach/irqs.h> -static struct resource uart0[] = { - { - .start = 0x43f90000, - .end = 0x43f93fff, - .flags = IORESOURCE_MEM, - }, { - .start = 45, - .end = 45, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = 0x43f94000, - .end = 0x43f97fff, - .flags = IORESOURCE_MEM, - }, { - .start = 32, - .end = 32, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = 0x5000c000, - .end = 0x5000ffff, - .flags = IORESOURCE_MEM, - }, { - .start = 18, - .end = 18, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource uart3[] = { - { - .start = 0x50008000, - .end = 0x5000bfff, - .flags = IORESOURCE_MEM, - }, { - .start = 5, - .end = 5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -static struct resource uart4[] = { - { - .start = 0x5002c000, - .end = 0x5002ffff, - .flags = IORESOURCE_MEM, - }, { - .start = 40, - .end = 40, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; - static u64 otg_dmamask = DMA_BIT_MASK(32); static struct resource mxc_otg_resources[] = { @@ -179,63 +84,6 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -static struct resource mxc_spi_resources0[] = { - { - .start = 0x43fa4000, - .end = 0x43fa7fff, - .flags = IORESOURCE_MEM, - }, { - .start = 14, - .end = 14, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_resources0), - .resource = mxc_spi_resources0, -}; - -static struct resource mxc_spi_resources1[] = { - { - .start = 0x50010000, - .end = 0x50013fff, - .flags = IORESOURCE_MEM, - }, { - .start = 13, - .end = 13, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_resources1), - .resource = mxc_spi_resources1, -}; - -static struct resource mxc_spi_resources2[] = { - { - .start = 0x50004000, - .end = 0x50007fff, - .flags = IORESOURCE_MEM, - }, { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_resources2), - .resource = mxc_spi_resources2, -}; - static struct resource mxc_pwm_resources0[] = { { .start = 0x53fe0000, @@ -331,63 +179,6 @@ struct platform_device mxc_pwm_device3 = { .resource = mxc_pwm_resources3, }; -static struct resource mxc_i2c_1_resources[] = { - { - .start = 0x43f80000, - .end = 0x43f83fff, - .flags = IORESOURCE_MEM, - }, { - .start = 3, - .end = 3, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), - .resource = mxc_i2c_1_resources, -}; - -static struct resource mxc_i2c_2_resources[] = { - { - .start = 0x43f98000, - .end = 0x43f9bfff, - .flags = IORESOURCE_MEM, - }, { - .start = 4, - .end = 4, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), - .resource = mxc_i2c_2_resources, -}; - -static struct resource mxc_i2c_3_resources[] = { - { - .start = 0x43f84000, - .end = 0x43f87fff, - .flags = IORESOURCE_MEM, - }, { - .start = 10, - .end = 10, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device2 = { - .name = "imx-i2c", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_i2c_3_resources), - .resource = mxc_i2c_3_resources, -}; - static struct mxc_gpio_port imx_gpio_ports[] = { { .chip.label = "gpio-0", @@ -412,7 +203,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = { } }; -int __init mxc_register_gpios(void) +int __init imx25_register_gpios(void) { return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } @@ -437,26 +228,6 @@ struct platform_device mx25_fec_device = { .resource = mx25_fec_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = MX25_NFC_BASE_ADDR, - .end = MX25_NFC_BASE_ADDR + 0x1fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_NANDFC, - .end = MX25_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - static struct resource mx25_rtc_resources[] = { { .start = MX25_DRYICE_BASE_ADDR, diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 00e29f57a59..4aceb68e35a 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -1,24 +1,12 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_otg; extern struct platform_device otg_udc_device; extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -extern struct platform_device mxc_spi_device2; extern struct platform_device mxc_pwm_device0; extern struct platform_device mxc_pwm_device1; extern struct platform_device mxc_pwm_device2; extern struct platform_device mxc_pwm_device3; extern struct platform_device mxc_keypad_device; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; -extern struct platform_device mxc_i2c_device2; extern struct platform_device mx25_fec_device; -extern struct platform_device mxc_nand_device; extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index e0f0dfda4d0..f07b1f95ac7 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -38,6 +38,7 @@ #include <mach/ssi.h> #include <mach/audmux.h> +#include "devices-imx25.h" #include "devices.h" static struct pad_desc eukrea_mbimxsd_pads[] = { @@ -195,7 +196,7 @@ static struct platform_device *platform_devices[] __initdata = { &eukrea_mbimxsd_lcd_powerdev, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -237,7 +238,7 @@ void __init eukrea_mbimxsd_baseboard_init(void) ); #endif - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx25_add_imx_uart1(&uart_pdata); mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index 4796484830a..d39f9ccd4be 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -37,18 +37,17 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#include <mach/i2c.h> #include <mach/mx25.h> #include <mach/mxc_nand.h> #include <mach/imxfb.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include <mach/iomux-mx25.h> +#include "devices-imx25.h" #include "devices.h" -#include <mach/iomux-mx25.h> -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -72,13 +71,15 @@ static struct fec_platform_data mx25_fec_pdata = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct mxc_nand_platform_data eukrea_cpuimx25_nand_board_info = { +static const struct mxc_nand_platform_data +eukrea_cpuimx25_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, }; -static struct imxi2c_platform_data eukrea_cpuimx25_i2c_1_data = { +static const struct imxi2c_platform_data +eukrea_cpuimx25_i2c0_data __initconst = { .bitrate = 100000, }; @@ -125,14 +126,14 @@ static void __init eukrea_cpuimx25_init(void) ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &eukrea_cpuimx25_nand_board_info); + imx25_add_imx_uart0(&uart_pdata); + imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); mxc_register_device(&mx25_rtc_device, NULL); mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx25_i2c_1_data); + imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c index ba3fbef1c41..62bc21f11a7 100644 --- a/arch/arm/mach-mx25/mach-mx25pdk.c +++ b/arch/arm/mach-mx25/mach-mx25_3ds.c @@ -16,6 +16,12 @@ * Boston, MA 02110-1301, USA. */ +/* + * This machine is known as: + * - i.MX25 3-Stack Development System + * - i.MX25 Platform Development Kit (i.MX25 PDK) + */ + #include <linux/types.h> #include <linux/init.h> #include <linux/delay.h> @@ -33,14 +39,14 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/mx25.h> -#include <mach/mxc_nand.h> #include <mach/imxfb.h> -#include "devices.h" #include <mach/iomux-mx25.h> -static struct imxuart_platform_data uart_pdata = { +#include "devices-imx25.h" +#include "devices.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -114,7 +120,8 @@ static void __init mx25pdk_fec_reset(void) gpio_set_value(FEC_RESET_B_GPIO, 1); } -static struct mxc_nand_platform_data mx25pdk_nand_board_info = { +static const struct mxc_nand_platform_data +mx25pdk_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, @@ -177,9 +184,9 @@ static void __init mx25pdk_init(void) mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx25_add_imx_uart0(&uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info); + imx25_add_mxc_nand(&mx25pdk_nand_board_info); mxc_register_device(&mx25_rtc_device, NULL); mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); mxc_register_device(&mxc_wdt, NULL); diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c index a7e587ff3e9..593e14545f5 100644 --- a/arch/arm/mach-mx25/mm.c +++ b/arch/arm/mach-mx25/mm.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/mm.h> @@ -69,8 +65,11 @@ void __init mx25_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int imx25_register_gpios(void); + void __init mx25_init_irq(void) { + imx25_register_gpios(); mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index b09e9a94adf..a11112afde5 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -15,6 +15,8 @@ comment "MX3 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART default y help Include support for MX31ADS platform. This includes specific @@ -34,6 +36,9 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Phytec pcm037 platform. This includes @@ -42,6 +47,7 @@ config MACH_PCM037 config MACH_PCM037_EET bool "Support pcm037 EET board extensions" depends on MACH_PCM037 + select IMX_HAVE_PLATFORM_SPI_IMX help Add support for PCM037 EET baseboard extensions. If you are using the OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel @@ -51,6 +57,9 @@ config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 select MXC_ULPI if USB_ULPI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -58,6 +67,9 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -74,6 +86,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific @@ -82,6 +97,8 @@ config MACH_MX31MOBOARD config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for mx31 based LILLY1131 modules. This includes @@ -90,6 +107,7 @@ config MACH_MX31LILLY config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. @@ -97,6 +115,9 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes @@ -105,6 +126,9 @@ config MACH_PCM043 config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Atmark Armadillo-500 platform. This includes @@ -113,6 +137,7 @@ config MACH_ARMADILLO5X0 config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_UART default n help Include support for MX35PDK platform. This includes specific @@ -121,6 +146,7 @@ config MACH_MX35_3DS config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. @@ -128,6 +154,9 @@ config MACH_KZM_ARM11_01 config MACH_EUKREA_CPUIMX35 bool "Support Eukrea CPUIMX35 Platform" select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX35 platform. This includes diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index ef68ff55a7b..54bc935acdc 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -22,7 +22,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ obj-$(CONFIG_MACH_QONG) += mach-qong.o obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h new file mode 100644 index 00000000000..3b1a44a2058 --- /dev/null +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx31.h> +#include <mach/devices-common.h> + +#define imx31_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata) +#define imx31_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata) +#define imx31_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata) + +#define imx31_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata) +#define imx31_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata) +#define imx31_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata) +#define imx31_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata) +#define imx31_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata) + +#define imx31_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata) + +#define imx31_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata) +#define imx31_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata) +#define imx31_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h new file mode 100644 index 00000000000..536d9b9a250 --- /dev/null +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx35.h> +#include <mach/devices-common.h> + +#define imx35_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata) +#define imx35_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata) +#define imx35_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata) + +#define imx35_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata) +#define imx35_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata) +#define imx35_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata) + +#define imx35_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata) + +#define imx35_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata) +#define imx35_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index db7acd6e910..a4fd1a26fc9 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -25,108 +25,10 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/mx3_camera.h> #include "devices.h" -static struct resource uart0[] = { - { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART1, - .end = MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART2, - .end = MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = UART3_BASE_ADDR, - .end = UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART3, - .end = MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -#ifdef CONFIG_ARCH_MX31 -static struct resource uart3[] = { - { - .start = UART4_BASE_ADDR, - .end = UART4_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART4, - .end = MXC_INT_UART4, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -static struct resource uart4[] = { - { - .start = UART5_BASE_ADDR, - .end = UART5_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART5, - .end = MXC_INT_UART5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; -#endif /* CONFIG_ARCH_MX31 */ - /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { { @@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = { } }; -int __init mxc_register_gpios(void) +int __init imx3x_register_gpios(void) { return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } @@ -167,82 +69,6 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = 0, /* runtime dependent */ - .end = 0, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_NANDFC, - .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - -static struct resource mxc_i2c0_resources[] = { - { - .start = I2C_BASE_ADDR, - .end = I2C_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C, - .end = MXC_INT_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = I2C2_BASE_ADDR, - .end = I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C2, - .end = MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - -static struct resource mxc_i2c2_resources[] = { - { - .start = I2C3_BASE_ADDR, - .end = I2C3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C3, - .end = MXC_INT_I2C3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device2 = { - .name = "imx-i2c", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_i2c2_resources), - .resource = mxc_i2c2_resources, -}; - #ifdef CONFIG_ARCH_MX31 static struct resource mxcsdhc0_resources[] = { { @@ -455,68 +281,7 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -/* - * SPI master controller - * 3 channels - */ -static struct resource mxc_spi_0_resources[] = { - { - .start = CSPI1_BASE_ADDR, - .end = CSPI1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI1, - .end = MXC_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_1_resources[] = { - { - .start = CSPI2_BASE_ADDR, - .end = CSPI2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI2, - .end = MXC_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_2_resources[] = { - { - .start = CSPI3_BASE_ADDR, - .end = CSPI3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI3, - .end = MXC_INT_CSPI3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_0_resources), - .resource = mxc_spi_0_resources, -}; - -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_1_resources), - .resource = mxc_spi_1_resources, -}; - -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_2_resources), - .resource = mxc_spi_2_resources, -}; - -#ifdef CONFIG_ARCH_MX35 +#if defined(CONFIG_ARCH_MX35) static struct resource mxc_fec_resources[] = { { .start = MXC_FEC_BASE_ADDR, @@ -628,16 +393,15 @@ struct platform_device imx_kpp_device = { static int __init mx3_devices_init(void) { +#if defined(CONFIG_ARCH_MX31) if (cpu_is_mx31()) { - mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; - mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; mxc_register_device(&mxc_rnga_device, NULL); } +#endif +#if defined(CONFIG_ARCH_MX35) if (cpu_is_mx35()) { - mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; - mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff; otg_resources[0].start = MX35_OTG_BASE_ADDR; otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; otg_resources[1].start = MXC_INT_USBOTG; @@ -653,6 +417,7 @@ static int __init mx3_devices_init(void) imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } +#endif return 0; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 2c3c8646a29..e5535234839 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -1,14 +1,4 @@ - -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_w1_master_device; -extern struct platform_device mxc_nand_device; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; -extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; @@ -20,9 +10,6 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -extern struct platform_device mxc_spi_device2; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 67859785244..368a603accf 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -46,6 +46,7 @@ #include <mach/audmux.h> #include <mach/ssi.h> +#include "devices-imx35.h" #include "devices.h" static const struct fb_videomode fb_modedb[] = { @@ -196,7 +197,7 @@ static struct platform_device *platform_devices[] __initdata = { &eukrea_mbimxsd_lcd_powerdev, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -238,7 +239,7 @@ void __init eukrea_mbimxsd_baseboard_init(void) ); #endif - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx35_add_imx_uart1(&uart_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 5f72ec91af2..96aadcadb4f 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -48,16 +48,14 @@ #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/board-armadillo5x0.h> #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" #include "crm_regs.h" @@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = { /* * NAND Flash */ -static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { +static const struct mxc_nand_platform_data +armadillo5x0_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = { }; /* UART device data */ -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, - &mxc_i2c_device1, &armadillo5x0_button_device, }; @@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void) ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); platform_add_devices(devices, ARRAY_SIZE(devices)); + imx31_add_imx_i2c1(NULL); /* Register UART */ - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); /* SMSC9118 IRQ pin */ gpio_direction_input(MX31_PIN_GPIO1_0); @@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void) &armadillo5x0_nor_flash_pdata); /* Register NAND Flash */ - mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 55caa5cb8bc..4f6146d3132 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -40,20 +40,20 @@ #include <mach/board-eukrea_cpuimx35.h> #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#include <mach/i2c.h> #include <mach/iomux-mx35.h> #include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx35.h" #include "devices.h" -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data eukrea_cpuimx35_i2c_1_data = { +static const struct imxi2c_platform_data +eukrea_cpuimx35_i2c0_data __initconst = { .bitrate = 50000, }; @@ -134,7 +134,8 @@ static struct pad_desc eukrea_cpuimx35_pads[] = { MX35_PAD_ATA_DA2__GPIO3_2, }; -static struct mxc_nand_platform_data pcm037_nand_board_info = { +static const struct mxc_nand_platform_data +eukrea_cpuimx35_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, @@ -181,12 +182,12 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + imx35_add_imx_uart0(&uart_pdata); + imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx35_i2c_1_data); + imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index f085d5d1a6d..5b23e416d6c 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -16,10 +16,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/gpio.h> @@ -37,13 +33,12 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/board-kzmarm11.h> #include <mach/clock.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/memory.h> +#include "devices-imx31.h" #include "devices.h" #define KZM_ARM11_IO_ADDRESS(x) ( \ @@ -51,6 +46,23 @@ IMX_IO_ADDRESS(x, MX31_CS5) ?: \ MX31_IO_ADDRESS(x)) +/* + * KZM-ARM11-01 Board Control Registers on FPGA + */ +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) + +/* + * External UART for touch panel on FPGA + */ +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) /* * KZM-ARM11-01 has an external UART on FPGA @@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void) #endif #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static void __init kzm_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); } #else static inline void kzm_init_imx_uart(void) diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 7e8d09ab9e6..d4d9e7a1f73 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -37,19 +33,46 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31_3ds.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/mxc_nand.h> -#include <mach/spi.h> + +#include "devices-imx31.h" #include "devices.h" -/*! - * @file mx31_3ds.c - * - * @brief This file contains the board-specific initialization routines. - * - * @ingroup System +/* Definitions for components on the Debug board */ + +/* Base address of CPLD controller on the Debug board */ +#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR) + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR + +/* CPLD config and interrupt base address */ +#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) + +/* status, interrupt */ +#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) +#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) +#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) +#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) +/* CPLD code version */ +#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) + +/* CPLD IRQ line for external uart, external ethernet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) + +#define MXC_MAX_EXP_IO_LINES 16 + +/* + * This file contains the board-specific initialization routines. */ static int mx31_3ds_pins[] = { @@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi1_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), }; @@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { /* * NAND Flash */ -static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { +static const struct mxc_nand_platform_data +mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT @@ -225,7 +249,7 @@ static struct fsl_usb2_platform_data usbotg_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -407,10 +431,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index b3d1a1895c2..94b3e7c4240 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -33,8 +29,6 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31ads.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -43,14 +37,45 @@ #include <linux/mfd/wm8350/pmic.h> #endif +#include "devices-imx31.h" #include "devices.h" -/*! - * @file mx31ads.c - * - * @brief This file contains the board-specific initialization routines. - * - * @ingroup System +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT +/* Offsets for the PBC Controller register */ + +/* PBC Board interrupt status register */ +#define PBC_INTSTATUS 0x000016 + +/* PBC Board interrupt current status register */ +#define PBC_INTCURR_STATUS 0x000018 + +/* PBC Interrupt mask register set address */ +#define PBC_INTMASK_SET 0x00001A + +/* PBC Interrupt mask register clear address */ +#define PBC_INTMASK_CLEAR 0x00001C + +/* External UART A */ +#define PBC_SC16C652_UARTA 0x010000 + +/* External UART B */ +#define PBC_SC16C652_UARTB 0x010010 + +#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) +#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) +#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) +#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) + +#define MXC_MAX_EXP_IO_LINES 16 +/* + * This file contains the board-specific initialization routines. */ #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) @@ -98,7 +123,7 @@ static inline int mxc_init_extuart(void) #endif #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -112,7 +137,7 @@ static unsigned int uart_pins[] = { static inline void mxc_init_imx_uart(void) { mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -475,7 +500,7 @@ static void mxc_init_i2c(void) mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); - mxc_register_device(&mxc_i2c_device1, NULL); + imx31_add_imx_i2c1(NULL); } #else static void mxc_init_i2c(void) diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 46bf57c4437..84942cf41b6 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -46,10 +42,10 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -257,12 +253,12 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi0_pdata = { +static const struct spi_imx_master spi0_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -315,8 +311,8 @@ static void __init mx31lilly_board_init(void) mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); - mxc_register_device(&mxc_spi_device0, &spi0_pdata); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_dev, 1); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 2b6d1140087..da236c497d2 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -42,14 +38,12 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/board-mx31lite.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/irqs.h> -#include <mach/mxc_nand.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = { MX31_PIN_CSPI2_SS2__SS2, }; -static struct mxc_nand_platform_data mx31lite_nand_board_info = { +static const struct mxc_nand_platform_data +mx31lite_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(0), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -253,9 +248,9 @@ static void __init mxc_board_init(void) /* NOR and NAND flash */ platform_device_register(&physmap_flash_device); - mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + imx31_add_mxc_nand(&mx31lite_nand_board_info); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); #if defined(CONFIG_USB_ULPI) diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 33a8d35498a..67776bc61c3 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -42,16 +38,15 @@ #include <mach/board-mx31moboard.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/i2c.h> #include <mach/mmc.h> #include <mach/mxc_ehci.h> #include <mach/mx3_camera.h> #include <mach/spi.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int moboard_pins[] = { @@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = { static int moboard_uart0_init(struct platform_device *pdev) { - gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); - return 0; + int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); + if (ret) + return ret; + + ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); + if (ret) + gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); + + return ret; +} + +static void moboard_uart0_exit(struct platform_device *pdev) +{ + gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); } -static struct imxuart_platform_data uart0_pdata = { +static const struct imxuart_platform_data uart0_pdata __initconst = { .init = moboard_uart0_init, + .exit = moboard_uart0_exit, }; -static struct imxuart_platform_data uart4_pdata = { +static const struct imxuart_platform_data uart4_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data moboard_i2c0_pdata = { +static const struct imxi2c_platform_data moboard_i2c0_data __initconst = { .bitrate = 400000, }; -static struct imxi2c_platform_data moboard_i2c1_pdata = { +static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { .bitrate = 100000, }; @@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master moboard_spi1_master = { +static const struct spi_imx_master moboard_spi1_pdata __initconst = { .chipselect = moboard_spi1_cs, .num_chipselect = ARRAY_SIZE(moboard_spi1_cs), }; @@ -220,11 +227,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = { }, }; +static struct mc13783_led_platform_data moboard_led[] = { + { + .id = MC13783_LED_R1, + .name = "coreboard-led-4:red", + .max_current = 2, + }, + { + .id = MC13783_LED_G1, + .name = "coreboard-led-4:green", + .max_current = 2, + }, + { + .id = MC13783_LED_B1, + .name = "coreboard-led-4:blue", + .max_current = 2, + }, + { + .id = MC13783_LED_R2, + .name = "coreboard-led-5:red", + .max_current = 3, + }, + { + .id = MC13783_LED_G2, + .name = "coreboard-led-5:green", + .max_current = 3, + }, + { + .id = MC13783_LED_B2, + .name = "coreboard-led-5:blue", + .max_current = 3, + }, +}; + +static struct mc13783_leds_platform_data moboard_leds = { + .num_leds = ARRAY_SIZE(moboard_led), + .led = moboard_led, + .flags = MC13783_LED_SLEWLIMTC, + .abmode = MC13783_LED_AB_DISABLED, + .tc1_period = MC13783_LED_PERIOD_10MS, + .tc2_period = MC13783_LED_PERIOD_10MS, +}; + static struct mc13783_platform_data moboard_pmic = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), + .leds = &moboard_leds, .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC, + MC13783_USE_ADC | MC13783_USE_LED, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { @@ -243,7 +293,7 @@ static int moboard_spi2_cs[] = { MXC_SPI_CS(1), }; -static struct spi_imx_master moboard_spi2_master = { +static const struct spi_imx_master moboard_spi2_pdata __initconst = { .chipselect = moboard_spi2_cs, .num_chipselect = ARRAY_SIZE(moboard_spi2_cs), }; @@ -456,15 +506,14 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart0_pdata); - - mxc_register_device(&mxc_uart_device4, &uart4_pdata); + imx31_add_imx_uart0(&uart0_pdata); + imx31_add_imx_uart4(&uart4_pdata); - mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); - mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + imx31_add_imx_i2c0(&moboard_i2c0_data); + imx31_add_imx_i2c1(&moboard_i2c1_data); - mxc_register_device(&mxc_spi_device1, &moboard_spi1_master); - mxc_register_device(&mxc_spi_device2, &moboard_spi2_master); + imx31_add_spi_imx1(&moboard_spi1_pdata); + imx31_add_spi_imx2(&moboard_spi2_pdata); gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index bcac84d4dca..1c30d7212f1 100644 --- a/arch/arm/mach-mx3/mach-mx35pdk.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -12,10 +12,12 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This machine is known as: + * - i.MX35 3-Stack Development System + * - i.MX35 Platform Development Kit (i.MX35 PDK) */ #include <linux/types.h> @@ -32,12 +34,12 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx35.h> +#include "devices-imx35.h" #include "devices.h" -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -90,7 +92,7 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx35_add_imx_uart0(&uart_pdata); mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index bb6c056854e..8a292dd1a71 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -43,20 +39,17 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/board-pcm037.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> #include <mach/mmc.h> #include <mach/mx3_camera.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" #include "pcm037.h" @@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = { .num_resources = 1, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = { .resource = &pcm038_sram_resource, }; -static struct mxc_nand_platform_data pcm037_nand_board_info = { +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; -static struct imxi2c_platform_data pcm037_i2c_1_data = { +static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = { .bitrate = 100000, }; -static struct imxi2c_platform_data pcm037_i2c_2_data = { +static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = { .bitrate = 20000, }; @@ -615,9 +609,10 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_register_device(&mxc_w1_master_device, NULL); @@ -635,10 +630,10 @@ static void __init mxc_board_init(void) i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); - mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + imx31_add_imx_i2c1(&pcm037_i2c1_data); + imx31_add_imx_i2c2(&pcm037_i2c2_data); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + imx31_add_mxc_nand(&pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 8d386000fc4..c8b98218efe 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -13,9 +13,6 @@ #include <linux/spi/spi.h> #include <mach/common.h> -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) -#include <mach/spi.h> -#endif #include <mach/iomux-mx3.h> #include <asm/mach-types.h> @@ -64,7 +61,7 @@ static struct spi_board_info pcm037_spi_dev[] = { #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; -struct spi_imx_master pcm037_spi1_master = { +static const struct spi_imx_master pcm037_spi1_pdata __initconst = { .chipselect = pcm037_spi1_cs, .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), }; @@ -184,7 +181,7 @@ static int eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) - mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); + imx35_add_spi_imx0(&pcm037_spi1_pdata); #endif platform_device_register(&pcm037_gpio_keys_device); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 8071b7281c4..b92f624c755 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -40,19 +36,15 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -#include <mach/i2c.h> -#endif #include <mach/iomux-mx35.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> #include <mach/ssi.h> +#include "devices-imx35.h" #include "devices.h" static const struct fb_videomode fb_modedb[] = { @@ -122,12 +114,12 @@ static struct platform_device pcm043_flash = { .num_resources = 1, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -static struct imxi2c_platform_data pcm043_i2c_1_data = { +static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { .bitrate = 50000, }; @@ -304,7 +296,8 @@ static struct imx_ssi_platform_data pcm043_ssi_pdata = { .flags = IMX_SSI_USE_AC97, }; -static struct mxc_nand_platform_data pcm037_nand_board_info = { +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -363,17 +356,17 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + imx35_add_imx_uart0(&uart_pdata); + imx35_add_mxc_nand(&pcm037_nand_board_info); mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx35_add_imx_uart1(&uart_pdata); #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE i2c_register_board_info(0, pcm043_i2c_devices, ARRAY_SIZE(pcm043_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); + imx35_add_imx_i2c0(&pcm043_i2c0_data); #endif mxc_register_device(&mx3_ipu, &mx3_ipu_data); diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index e5b5b8323a1..d44ac70222a 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -34,9 +30,9 @@ #include <mach/common.h> #include <asm/page.h> #include <asm/setup.h> -#include <mach/board-qong.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> + +#include "devices-imx31.h" #include "devices.h" /* FPGA defines */ @@ -62,7 +58,7 @@ * This file contains the board-specific initialization routines. */ -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -73,11 +69,11 @@ static int uart_pins[] = { MX31_PIN_RXD1__RXD1 }; -static inline void mxc_init_imx_uart(void) +static inline void __init mxc_init_imx_uart(void) { mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); } static struct resource dnet_resources[] = { @@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = { static struct resource qong_flash_resource = { .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1, + .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 6858a4f9806..a378fba49a8 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/mm.h> @@ -97,8 +93,11 @@ void __init mx35_map_io(void) } #endif +int imx3x_register_gpios(void); + void __init mx31_init_irq(void) { + imx3x_register_gpios(); mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); } diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c index 7aebd74a12e..827fd3c8020 100644 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> @@ -36,13 +32,13 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> #include <mach/mmc.h> #include <mach/mx3fb.h> #include <mach/ipu.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = { }; /* UART */ -static struct imxuart_platform_data uart_pdata __initdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void) mxc_iomux_setup_multiple_pins(lilly_db_board_pins, ARRAY_SIZE(lilly_db_board_pins), "development board pins"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_register_device(&mxcsdhc_device0, &mmc_pdata); mx31lilly_init_fb(); } diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 5f05bfbec38..7b0e74e275b 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> @@ -37,12 +33,11 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lite.h> #include <mach/mmc.h> -#include <mach/spi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = { }; /* UART */ -static struct imxuart_platform_data uart_pdata __initdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi0_pdata = { +static const struct spi_imx_master spi0_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -201,9 +196,9 @@ void __init mx31lite_db_init(void) mxc_iomux_setup_multiple_pins(litekit_db_board_pins, ARRAY_SIZE(litekit_db_board_pins), "development board pins"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); mxc_register_device(&mxcsdhc_device0, &mmc_pdata); - mxc_register_device(&mxc_spi_device0, &spi0_pdata); + imx31_add_spi_imx0(&spi0_pdata); platform_device_register(&litekit_led_device); mxc_register_device(&imx_wdt_device0, NULL); mxc_register_device(&imx_rtc_device0, NULL); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 582299cb2c0..fc395a7a859 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/gpio.h> @@ -27,13 +23,13 @@ #include <linux/usb/otg.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int devboard_pins[] = { @@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = { MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void) mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), "devboard"); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart1(&uart_pdata); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 4930f8c27e6..0551eb39d97 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 293eea6d9d9..40c3e7564cb 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -30,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31moboard.h> #include <mach/mxc_ehci.h> @@ -38,6 +33,7 @@ #include <media/soc_camera.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int smartbot_pins[] = { @@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = { MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -183,8 +179,7 @@ void __init mx31moboard_smartbot_init(int board) mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), "smartbot"); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - + imx31_add_imx_uart1(&uart_pdata); switch (board) { case MX31SMARTBOT: diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index ede4fcbc7e8..fa118646c99 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -253,7 +253,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = { }, }; -int __init mxc_register_gpios(void) +int __init imx51_register_gpios(void) { return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index b7677ef80cc..2f79722508c 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -65,6 +65,8 @@ void __init mx51_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int imx51_register_gpios(void); + void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -79,5 +81,6 @@ void __init mx51_init_irq(void) if (!tzic_virt) panic("unable to map TZIC interrupt controller\n"); + imx51_register_gpios(); tzic_init_irq(tzic_virt); } diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h index ce4f5905818..b989baccd67 100644 --- a/arch/arm/mach-mxc91231/crm_regs.h +++ b/arch/arm/mach-mxc91231/crm_regs.h @@ -11,11 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c index 353bd977b39..027af4f0d18 100644 --- a/arch/arm/mach-mxc91231/devices.c +++ b/arch/arm/mach-mxc91231/devices.c @@ -135,7 +135,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = { }, }; -int __init mxc_register_gpios(void) +int __init mxc91231_register_gpios(void) { return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c index 6becda3ff33..aeccfd755fe 100644 --- a/arch/arm/mach-mxc91231/mm.c +++ b/arch/arm/mach-mxc91231/mm.c @@ -15,11 +15,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/mm.h> @@ -88,7 +83,10 @@ void __init mxc91231_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int mxc91231_register_gpios(void); + void __init mxc91231_init_irq(void) { + mxc91231_register_gpios(); mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR)); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index e7d629b3c76..f474a80b886 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -137,9 +137,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 5fcb52e7129..fefd7e6e977 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -209,8 +209,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 81bba194b03..b9526101381 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -579,9 +579,7 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); gpio_direction_input(OMAP3_EVM_TS_GPIO); - - omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 395d049bf01..db06dc910ba 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -130,8 +130,8 @@ static struct platform_device pandora_keys_gpio = { static void __init pandora_keys_gpio_init(void) { /* set debounce time for GPIO banks 4 and 6 */ - omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); - omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME); } static int board_keymap[] = { diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2504d41f923..2f5f8233dd5 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -328,8 +328,7 @@ static void __init omap3_ads7846_init(void) } gpio_direction_input(OMAP3_TS_GPIO); - omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_TS_GPIO, 310); } static struct ads7846_platform_data ads7846_config = { diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 685f34a9634..fe0de1698ed 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -240,22 +240,23 @@ error_fail: #define ORION_BLINK_HALF_PERIOD 100 /* ms */ -static int dns323_gpio_blink_set(unsigned gpio, +static int dns323_gpio_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) { - static int value = 0; - if (!*delay_on && !*delay_off) + if (delay_on && delay_off && !*delay_on && !*delay_off) *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; - if (ORION_BLINK_HALF_PERIOD == *delay_on - && ORION_BLINK_HALF_PERIOD == *delay_off) { - value = !value; - orion_gpio_set_blink(gpio, value); - return 0; + switch(state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); } - - return -EINVAL; + return 0; } static struct gpio_led dns323_leds[] = { @@ -263,6 +264,7 @@ static struct gpio_led dns323_leds[] = { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER2, .default_trigger = "timer", + .active_low = 1, }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 45799c608d8..9e39faa283b 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -49,7 +49,6 @@ #include <linux/io.h> #include <linux/i2c.h> -#include <linux/backlight.h> #include <linux/regulator/machine.h> #include <linux/mfd/pcf50633/core.h> @@ -57,6 +56,7 @@ #include <linux/mfd/pcf50633/adc.h> #include <linux/mfd/pcf50633/gpio.h> #include <linux/mfd/pcf50633/pmic.h> +#include <linux/mfd/pcf50633/backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -254,6 +254,12 @@ static char *gta02_batteries[] = { "battery", }; +static struct pcf50633_bl_platform_data gta02_backlight_data = { + .default_brightness = 0x3f, + .default_brightness_limit = 0, + .ramp_time = 5, +}; + struct pcf50633_platform_data gta02_pcf_pdata = { .resumers = { [0] = PCF50633_INT1_USBINS | @@ -271,6 +277,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .charger_reference_current_ma = 1000, + .backlight_data = >a02_backlight_data, + .reg_init_data = { [PCF50633_REGULATOR_AUTO] = { .constraints = { @@ -478,71 +486,6 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = { }; - - -static void gta02_bl_set_intensity(int intensity) -{ - struct pcf50633 *pcf = gta02_pcf; - int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); - - /* We map 8-bit intensity to 6-bit intensity in hardware. */ - intensity >>= 2; - - /* - * This can happen during, eg, print of panic on blanked console, - * but we can't service i2c without interrupts active, so abort. - */ - if (in_atomic()) { - printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n"); - return; - } - - old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); - if (intensity == old_intensity) - return; - - /* We can't do this anywhere else. */ - pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5); - - if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3)) - old_intensity = 0; - - /* - * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60) - * if seen, you have to re-enable the LED unit. - */ - if (!intensity || !old_intensity) - pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0); - - /* Illegal to set LEDOUT to 0. */ - if (!intensity) - pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2); - else - pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, - intensity); - - if (intensity) - pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2); - -} - -static struct generic_bl_info gta02_bl_info = { - .name = "gta02-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = gta02_bl_set_intensity, -}; - -static struct platform_device gta02_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = >a02_bl_info, - }, -}; - - - /* USB */ static struct s3c2410_hcd_info gta02_usb_info __initdata = { .port[0] = { @@ -579,7 +522,6 @@ static struct platform_device *gta02_devices[] __initdata = { /* These guys DO need to be children of PMU. */ static struct platform_device *gta02_devices_pmu_children[] = { - >a02_bl_dev, }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 7a4138beb66..fbd85a9b7bb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -259,6 +259,12 @@ static struct clk init_clocks[] = { .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, }, { + .name = "otg", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_USB, + }, { .name = "timers", .id = -1, .parent = &clk_p, diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h index a4b9b40d18f..911854d9ad4 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -72,7 +72,14 @@ #define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) #define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) +/* + * S5P6440 has 0-15 external interrupts in group 0. Only these can be used + * to wake up from sleep. If request is beyond this range, by mistake, a large + * return value for an irq number should be indication of something amiss. + */ +#define S5P_EINT_BASE2 (0xf0000000) /* * Next the external interrupt groups. These are similar to the IRQ_EINT(x) diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h index da665809f6e..02c23749c02 100644 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ b/arch/arm/mach-s5p6442/include/mach/irqs.h @@ -77,8 +77,9 @@ #define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_IRQ_EINT_BASE + (x)-16)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT(31) + 1) diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 15066df3ced..28aa551dc3a 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -100,9 +100,6 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_EINT_BASE2 + (x) - 16)) - #define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) #define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 763edebdd57..dd6295e1251 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -60,12 +60,9 @@ #define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \ - (((irq) - S5P_EINT_BASE2))) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 92fc6c7fc06..96895378ea2 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,22 +118,12 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ - : ((x) + S5P_EINT_16_31_BASE)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) /* Set the default NR_IRQS */ - #define NR_IRQS (IRQ_EINT(31) + 1) -#define EINT_GPIO_0(x) S5PV210_GPH0(x) -#define EINT_GPIO_1(x) S5PV210_GPH1(x) -#define EINT_GPIO_2(x) S5PV210_GPH2(x) -#define EINT_GPIO_3(x) S5PV210_GPH3(x) - /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 6d068091c36..49e029b4978 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -27,12 +27,9 @@ #define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ - : ((irq) - S5P_EINT_16_31_BASE)) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) @@ -41,4 +38,11 @@ #define S5P_EXTINT_RISEEDGE (0x03) #define S5P_EXTINT_BOTHEDGE (0x04) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index c73ed06b606..f0394baa11f 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -9,7 +9,7 @@ */ #include <linux/kernel.h> #include <linux/i2c.h> -#include <linux/mfd/ab3100.h> +#include <linux/mfd/abx500.h> #include <linux/regulator/machine.h> #include <linux/amba/bus.h> #include <mach/irqs.h> @@ -46,6 +46,7 @@ /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ #define BUCK_SLEEP_SETTING 0xAC +#ifdef CONFIG_AB3100_CORE static struct regulator_consumer_supply supply_ldo_c[] = { { .dev_name = "ab3100-codec", @@ -253,14 +254,68 @@ static struct ab3100_platform_data ab3100_plf_data = { LDO_D_SETTING, }, }; +#endif + +#ifdef CONFIG_AB3550_CORE +static struct abx500_init_settings ab3550_init_settings[] = { + { + .bank = 0, + .reg = AB3550_IMR1, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR2, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR3, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR4, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR5, + /* The two most significant bits are not used */ + .setting = 0x3f + }, +}; + +static struct ab3550_platform_data ab3550_plf_data = { + .irq = { + .base = IRQ_AB3550_BASE, + .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1), + }, + .dev_data = { + }, + .init_settings = ab3550_init_settings, + .init_settings_sz = ARRAY_SIZE(ab3550_init_settings), +}; +#endif static struct i2c_board_info __initdata bus0_i2c_board_info[] = { +#if defined(CONFIG_AB3550_CORE) + { + .type = "ab3550", + .addr = 0x4A, + .irq = IRQ_U300_IRQ0_EXT, + .platform_data = &ab3550_plf_data, + }, +#elif defined(CONFIG_AB3100_CORE) { .type = "ab3100", .addr = 0x48, .irq = IRQ_U300_IRQ0_EXT, .platform_data = &ab3100_plf_data, }, +#else + { }, +#endif }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index a6867b12773..09b1b28fa8f 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -109,6 +109,13 @@ #define U300_NR_IRQS 48 #endif +#ifdef CONFIG_AB3550_CORE +#define IRQ_AB3550_BASE (U300_NR_IRQS) +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) + +#define NR_IRQS (IRQ_AB3550_END + 1) +#else #define NR_IRQS U300_NR_IRQS +#endif #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 072196c5726..bb8d7b77181 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = { static struct spi_board_info u8500_spi_devices[] = { { - .modalias = "ab4500", + .modalias = "ab8500", .controller_data = &ab4500_chip_info, .max_speed_hz = 12000000, .bus_num = 0, diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 1b2c9890e8b..6544855af2f 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -411,7 +411,7 @@ static struct clk_lookup u8500_common_clks[] = { CLK(apetraceclk, "apetrace", NULL), CLK(mcdeclk, "mcde", NULL), CLK(ipi2clk, "ipi2", NULL), - CLK(dmaclk, "dma40", NULL), + CLK(dmaclk, "dma40.0", NULL), CLK(b2r2clk, "b2r2", NULL), CLK(tvclk, "tv", NULL), }; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index d04299f3b6b..f21c444edd9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -32,6 +32,7 @@ static struct platform_device *platform_devs[] __initdata = { &u8500_gpio_devs[6], &u8500_gpio_devs[7], &u8500_gpio_devs[8], + &u8500_dma40_device, }; /* minimum static i/o mapping required to boot U8500 platforms */ @@ -71,6 +72,9 @@ void __init u8500_init_devices(void) { ux500_init_devices(); + if (cpu_is_u8500ed()) + dma40_u8500ed_fixup(); + /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 20334236afc..82290342194 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -12,9 +12,13 @@ #include <linux/gpio.h> #include <linux/amba/bus.h> +#include <plat/ste_dma40.h> + #include <mach/hardware.h> #include <mach/setup.h> +#include "ste-dma40-db8500.h" + static struct nmk_gpio_platform_data u8500_gpio_data[] = { GPIO_DATA("GPIO-0-31", 0), GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ @@ -105,3 +109,108 @@ struct platform_device u8500_i2c4_device = { .resource = u8500_i2c4_resources, .num_resources = ARRAY_SIZE(u8500_i2c4_resources), }; + +static struct resource dma40_resources[] = { + [0] = { + .start = U8500_DMA_BASE, + .end = U8500_DMA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "base", + }, + [1] = { + .start = U8500_DMA_LCPA_BASE, + .end = U8500_DMA_LCPA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "lcpa", + }, + [2] = { + .start = U8500_DMA_LCLA_BASE, + .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1, + .flags = IORESOURCE_MEM, + .name = "lcla", + }, + [3] = { + .start = IRQ_DMA, + .end = IRQ_DMA, + .flags = IORESOURCE_IRQ} +}; + +/* Default configuration for physcial memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_PCHAN_BASIC_MODE), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + +}; +/* Default configuration for logical memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_LCHAN_SRC_LOG_DST_LOG | + STEDMA40_NO_TIM_FOR_LINK), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + +}; + +/* + * Mapping between destination event lines and physical device address. + * The event line is tied to a device and therefor the address is constant. + */ +static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; + +/* Mapping between source event lines and physical device address */ +static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; + +/* Reserved event lines for memcpy only */ +static int dma40_memcpy_event[] = { + STEDMA40_MEMCPY_TX_1, + STEDMA40_MEMCPY_TX_2, + STEDMA40_MEMCPY_TX_3, + STEDMA40_MEMCPY_TX_4, +}; + +static struct stedma40_platform_data dma40_plat_data = { + .dev_len = STEDMA40_NR_DEV, + .dev_rx = dma40_rx_map, + .dev_tx = dma40_tx_map, + .memcpy = dma40_memcpy_event, + .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), + .memcpy_conf_phy = &dma40_memcpy_conf_phy, + .memcpy_conf_log = &dma40_memcpy_conf_log, + .llis_per_log = 8, +}; + +struct platform_device u8500_dma40_device = { + .dev = { + .platform_data = &dma40_plat_data, + }, + .name = "dma40", + .id = 0, + .num_resources = ARRAY_SIZE(dma40_resources), + .resource = dma40_resources +}; + +void dma40_u8500ed_fixup(void) +{ + dma40_plat_data.memcpy = NULL; + dma40_plat_data.memcpy_len = 0; + dma40_resources[0].start = U8500_DMA_BASE_ED; + dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1; +} diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 9169e1e382a..85fc6a80b38 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -7,6 +7,18 @@ #ifndef __MACH_DB8500_REGS_H #define __MACH_DB8500_REGS_H +/* Base address and bank offsets for ESRAM */ +#define U8500_ESRAM_BASE 0x40000000 +#define U8500_ESRAM_BANK_SIZE 0x00020000 +#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE +#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) +/* Use bank 4 for DMA LCLA and LCPA */ +#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000) + #define U8500_PER3_BASE 0x80000000 #define U8500_STM_BASE 0x80100000 #define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 0422af00a56..c2b2f257494 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -25,5 +25,8 @@ extern struct platform_device ux500_i2c3_device; extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; +extern struct platform_device u8500_dma40_device; + +void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h new file mode 100644 index 00000000000..e7016278dfa --- /dev/null +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -0,0 +1,154 @@ +/* + * arch/arm/mach-ux500/ste_dma40_db8500.h + * DB8500-SoC-specific configuration for DMA40 + * + * Copyright (C) ST-Ericsson 2007-2010 + * License terms: GNU General Public License (GPL) version 2 + * Author: Per Friden <per.friden@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#ifndef STE_DMA40_DB8500_H +#define STE_DMA40_DB8500_H + +#define STEDMA40_NR_DEV 64 + +enum dma_src_dev_type { + STEDMA40_DEV_SPI0_RX = 0, + STEDMA40_DEV_SD_MMC0_RX = 1, + STEDMA40_DEV_SD_MMC1_RX = 2, + STEDMA40_DEV_SD_MMC2_RX = 3, + STEDMA40_DEV_I2C1_RX = 4, + STEDMA40_DEV_I2C3_RX = 5, + STEDMA40_DEV_I2C2_RX = 6, + STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */ + STEDMA40_DEV_SSP0_RX = 8, + STEDMA40_DEV_SSP1_RX = 9, + STEDMA40_DEV_MCDE_RX = 10, + STEDMA40_DEV_UART2_RX = 11, + STEDMA40_DEV_UART1_RX = 12, + STEDMA40_DEV_UART0_RX = 13, + STEDMA40_DEV_MSP2_RX = 14, + STEDMA40_DEV_I2C0_RX = 15, + STEDMA40_DEV_USB_OTG_IEP_8 = 16, + STEDMA40_DEV_USB_OTG_IEP_1_9 = 17, + STEDMA40_DEV_USB_OTG_IEP_2_10 = 18, + STEDMA40_DEV_USB_OTG_IEP_3_11 = 19, + STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20, + STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21, + STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22, + STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23, + STEDMA40_DEV_SRC_SXA0_RX_TX = 24, + STEDMA40_DEV_SRC_SXA1_RX_TX = 25, + STEDMA40_DEV_SRC_SXA2_RX_TX = 26, + STEDMA40_DEV_SRC_SXA3_RX_TX = 27, + STEDMA40_DEV_SD_MM2_RX = 28, + STEDMA40_DEV_SD_MM0_RX = 29, + STEDMA40_DEV_MSP1_RX = 30, + /* + * This channel is either SlimBus or MSP, + * never both at the same time. + */ + STEDMA40_SLIM0_CH0_RX = 31, + STEDMA40_DEV_MSP0_RX = 31, + STEDMA40_DEV_SD_MM1_RX = 32, + STEDMA40_DEV_SPI2_RX = 33, + STEDMA40_DEV_I2C3_RX2 = 34, + STEDMA40_DEV_SPI1_RX = 35, + STEDMA40_DEV_USB_OTG_IEP_4_12 = 36, + STEDMA40_DEV_USB_OTG_IEP_5_13 = 37, + STEDMA40_DEV_USB_OTG_IEP_6_14 = 38, + STEDMA40_DEV_USB_OTG_IEP_7_15 = 39, + STEDMA40_DEV_SPI3_RX = 40, + STEDMA40_DEV_SD_MM3_RX = 41, + STEDMA40_DEV_SD_MM4_RX = 42, + STEDMA40_DEV_SD_MM5_RX = 43, + STEDMA40_DEV_SRC_SXA4_RX_TX = 44, + STEDMA40_DEV_SRC_SXA5_RX_TX = 45, + STEDMA40_DEV_SRC_SXA6_RX_TX = 46, + STEDMA40_DEV_SRC_SXA7_RX_TX = 47, + STEDMA40_DEV_CAC1_RX = 48, + /* RX channels 49 and 50 are unused */ + STEDMA40_DEV_MSHC_RX = 51, + STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52, + STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53, + STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54, + STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55, + /* RX channels 56 thru 60 are unused */ + STEDMA40_DEV_CAC0_RX = 61, + /* RX channels 62 and 63 are unused */ +}; + +enum dma_dest_dev_type { + STEDMA40_DEV_SPI0_TX = 0, + STEDMA40_DEV_SD_MMC0_TX = 1, + STEDMA40_DEV_SD_MMC1_TX = 2, + STEDMA40_DEV_SD_MMC2_TX = 3, + STEDMA40_DEV_I2C1_TX = 4, + STEDMA40_DEV_I2C3_TX = 5, + STEDMA40_DEV_I2C2_TX = 6, + STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */ + STEDMA40_DEV_SSP0_TX = 8, + STEDMA40_DEV_SSP1_TX = 9, + /* TX channel 10 is unused */ + STEDMA40_DEV_UART2_TX = 11, + STEDMA40_DEV_UART1_TX = 12, + STEDMA40_DEV_UART0_TX= 13, + STEDMA40_DEV_MSP2_TX = 14, + STEDMA40_DEV_I2C0_TX = 15, + STEDMA40_DEV_USB_OTG_OEP_8 = 16, + STEDMA40_DEV_USB_OTG_OEP_1_9 = 17, + STEDMA40_DEV_USB_OTG_OEP_2_10= 18, + STEDMA40_DEV_USB_OTG_OEP_3_11 = 19, + STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20, + STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21, + STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22, + STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23, + STEDMA40_DEV_DST_SXA0_RX_TX = 24, + STEDMA40_DEV_DST_SXA1_RX_TX = 25, + STEDMA40_DEV_DST_SXA2_RX_TX = 26, + STEDMA40_DEV_DST_SXA3_RX_TX = 27, + STEDMA40_DEV_SD_MM2_TX = 28, + STEDMA40_DEV_SD_MM0_TX = 29, + STEDMA40_DEV_MSP1_TX = 30, + /* + * This channel is either SlimBus or MSP, + * never both at the same time. + */ + STEDMA40_SLIM0_CH0_TX = 31, + STEDMA40_DEV_MSP0_TX = 31, + STEDMA40_DEV_SD_MM1_TX = 32, + STEDMA40_DEV_SPI2_TX = 33, + /* Secondary I2C3 channel */ + STEDMA40_DEV_I2C3_TX2 = 34, + STEDMA40_DEV_SPI1_TX = 35, + STEDMA40_DEV_USB_OTG_OEP_4_12 = 36, + STEDMA40_DEV_USB_OTG_OEP_5_13 = 37, + STEDMA40_DEV_USB_OTG_OEP_6_14 = 38, + STEDMA40_DEV_USB_OTG_OEP_7_15 = 39, + STEDMA40_DEV_SPI3_TX = 40, + STEDMA40_DEV_SD_MM3_TX = 41, + STEDMA40_DEV_SD_MM4_TX = 42, + STEDMA40_DEV_SD_MM5_TX = 43, + STEDMA40_DEV_DST_SXA4_RX_TX = 44, + STEDMA40_DEV_DST_SXA5_RX_TX = 45, + STEDMA40_DEV_DST_SXA6_RX_TX = 46, + STEDMA40_DEV_DST_SXA7_RX_TX = 47, + STEDMA40_DEV_CAC1_TX = 48, + STEDMA40_DEV_CAC1_TX_HAC1_TX = 49, + STEDMA40_DEV_HAC1_TX = 50, + STEDMA40_MEMXCPY_TX_0 = 51, + STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52, + STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53, + STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54, + STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55, + STEDMA40_MEMCPY_TX_1 = 56, + STEDMA40_MEMCPY_TX_2 = 57, + STEDMA40_MEMCPY_TX_3 = 58, + STEDMA40_MEMCPY_TX_4 = 59, + STEDMA40_MEMCPY_TX_5 = 60, + STEDMA40_DEV_CAC0_TX = 61, + STEDMA40_DEV_CAC0_TX_HAC0_TX = 62, + STEDMA40_DEV_HAC0_TX = 63, +}; + +#endif diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 902ba9e42c5..20b2e79e54f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -1,5 +1,7 @@ if ARCH_MXC +source "arch/arm/plat-mxc/devices/Kconfig" + menu "Freescale MXC Implementations" choice @@ -8,15 +10,12 @@ choice config ARCH_MX1 bool "MX1-based" - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 + select SOC_IMX1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family @@ -49,8 +48,7 @@ config ARCH_MX5 endchoice -source "arch/arm/mach-mx1/Kconfig" -source "arch/arm/mach-mx2/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 895bc3c5e0c..c7506a80eb3 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -8,8 +8,6 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) obj-$(CONFIG_MXC_TZIC) += tzic.o -obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o @@ -21,3 +19,5 @@ ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index b62917ca3f9..1180bef7664 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index ab94d78a927..f9e7cdbd000 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 56f2fb5cc45..735776d8495 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <mach/common.h> @@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data) return ret; } +struct platform_device *__init imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + int ret = -ENOMEM; + struct platform_device *pdev; + + pdev = platform_device_alloc(name, id); + if (!pdev) + goto err; + + if (res) { + ret = platform_device_add_resources(pdev, res, num_resources); + if (ret) + goto err; + } + + if (data) { + ret = platform_device_add_data(pdev, data, size_data); + if (ret) + goto err; + } + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + return ERR_PTR(ret); + } + + return pdev; +} diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig new file mode 100644 index 00000000000..09230f8c802 --- /dev/null +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -0,0 +1,11 @@ +config IMX_HAVE_PLATFORM_IMX_I2C + bool + +config IMX_HAVE_PLATFORM_IMX_UART + bool + +config IMX_HAVE_PLATFORM_MXC_NAND + bool + +config IMX_HAVE_PLATFORM_SPI_IMX + bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile new file mode 100644 index 00000000000..5ecbb244d21 --- /dev/null +++ b/arch/arm/plat-mxc/devices/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c new file mode 100644 index 00000000000..d0af9f7d8ae --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_imx_i2c(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct imxi2c_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c new file mode 100644 index 00000000000..fa3dff1433e --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_imx_uart_3irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irqrx, resource_size_t irqtx, + resource_size_t irqrts, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irqrx, + .end = irqrx, + .flags = IORESOURCE_IRQ, + }, { + .start = irqtx, + .end = irqtx, + .flags = IORESOURCE_IRQ, + }, { + .start = irqrts, + .end = irqrx, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_imx_uart_1irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c new file mode 100644 index 00000000000..1c286418d12 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata, + resource_size_t iosize) +{ + static int id = 0; + + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); +} + +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); +} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c new file mode 100644 index 00000000000..2831a6d3eb4 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_spi_imx(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct spi_imx_master *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 618479258bb..35a064ff02b 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -11,10 +11,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/platform_device.h> diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h deleted file mode 100644 index 0376c133c9f..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>. - * All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ -#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ - -#endif diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h index a1fd5830af4..45b2fb8bed6 100644 --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h +++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h @@ -25,7 +25,7 @@ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside eukrea_cpuimx27_init(). * diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h deleted file mode 100644 index 93cc66f104c..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H -#define __ARM_ARCH_BOARD_KZM_ARM11_H - -/* - * KZM-ARM11-01 Board Control Registers on FPGA - */ -#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) - -/* - * External UART for touch panel on FPGA - */ -#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) - -#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ - diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h deleted file mode 100644 index 0cf4fa29510..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ - -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 -#define MX21ADS_MMIO_SIZE SZ_16M - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) - -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) - -/* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 - -#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h deleted file mode 100644 index 7776d230327..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xf4300000 -#define PBC_REG_ADDR(offset) (void __force __iomem *) \ - (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h deleted file mode 100644 index ea87551d273..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h deleted file mode 100644 index fec1bcfa916..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h deleted file mode 100644 index da92933a233..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ - -/* Definitions for components on the Debug board */ - -/* Base address of CPLD controller on the Debug board */ -#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR) - -/* LAN9217 ethernet base address */ -#define LAN9217_BASE_ADDR CS5_BASE_ADDR - -/* CPLD config and interrupt base address */ -#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) - -/* LED switchs */ -#define CPLD_LED_REG (CPLD_ADDR + 0x00) -/* buttons */ -#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08) -/* status, interrupt */ -#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) -#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) -#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) -#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) -/* CPLD code version */ -#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) -/* module reset register */ -#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60) -/* CPU ID and Personality ID */ -#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68) - -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4) - -#define MXC_MAX_EXP_IO_LINES 16 - -#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 095a199591c..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -#include <mach/hardware.h> - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h index eb5a5024622..0df71bfefbb 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -31,7 +31,7 @@ enum mx31lilly_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lilly_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 2b2da036757..c1ad0ae807c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -32,7 +32,7 @@ enum mx31lite_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lite_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index 36ff3cedee1..de14543891c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -31,7 +31,7 @@ enum mx31moboard_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31moboard_devboard_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h deleted file mode 100644 index 383f1c04df0..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h deleted file mode 100644 index 13411709b13..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 410f9786ed2..6f371e35753 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -22,7 +22,7 @@ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside pcm038_init(). * diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h deleted file mode 100644 index 1ac4e1682e5..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm043.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ -#define __ASM_ARCH_MXC_BOARD_PCM043_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h deleted file mode 100644 index 6d88c7af4b2..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ -#define __ASM_ARCH_MXC_BOARD_QONG_H__ - -/* NOR FLASH */ -#define QONG_NOR_SIZE (128*1024*1024) - -#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h new file mode 100644 index 00000000000..05c8d3f0a08 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> + +struct platform_device *imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data); + +#include <mach/i2c.h> +struct platform_device *__init imx_add_imx_i2c(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct imxi2c_platform_data *pdata); + +#include <mach/imx-uart.h> +struct platform_device *__init imx_add_imx_uart_3irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irqrx, resource_size_t irqtx, + resource_size_t irqrts, + const struct imxuart_platform_data *pdata); +struct platform_device *__init imx_add_imx_uart_1irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct imxuart_platform_data *pdata); + +#include <mach/mxc_nand.h> +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); + +#include <mach/spi.h> +struct platform_device *__init imx_add_spi_imx(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct spi_imx_master *pdata); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 3887f3fe29d..15d59510f59 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_IOMUX_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 5eba7e6785d..641b2461823 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -91,24 +91,24 @@ #define MX1_SIM_DATA_INT 16 #define MX1_RTC_INT 17 #define MX1_RTC_SAMINT 18 -#define MX1_UART2_MINT_PFERR 19 -#define MX1_UART2_MINT_RTS 20 -#define MX1_UART2_MINT_DTR 21 -#define MX1_UART2_MINT_UARTC 22 -#define MX1_UART2_MINT_TX 23 -#define MX1_UART2_MINT_RX 24 -#define MX1_UART1_MINT_PFERR 25 -#define MX1_UART1_MINT_RTS 26 -#define MX1_UART1_MINT_DTR 27 -#define MX1_UART1_MINT_UARTC 28 -#define MX1_UART1_MINT_TX 29 -#define MX1_UART1_MINT_RX 30 +#define MX1_INT_UART2PFERR 19 +#define MX1_INT_UART2RTS 20 +#define MX1_INT_UART2DTR 21 +#define MX1_INT_UART2UARTC 22 +#define MX1_INT_UART2TX 23 +#define MX1_INT_UART2RX 24 +#define MX1_INT_UART1PFERR 25 +#define MX1_INT_UART1RTS 26 +#define MX1_INT_UART1DTR 27 +#define MX1_INT_UART1UARTC 28 +#define MX1_INT_UART1TX 29 +#define MX1_INT_UART1RX 30 #define MX1_VOICE_DAC_INT 31 #define MX1_VOICE_ADC_INT 32 #define MX1_PEN_DATA_INT 33 #define MX1_PWM_INT 34 #define MX1_SDHC_INT 35 -#define MX1_I2C_INT 39 +#define MX1_INT_I2C 39 #define MX1_CSPI_INT 41 #define MX1_SSI_TX_INT 42 #define MX1_SSI_TX_ERR_INT 43 @@ -245,7 +245,7 @@ #define PEN_DATA_INT MX1_PEN_DATA_INT #define PWM_INT MX1_PWM_INT #define SDHC_INT MX1_SDHC_INT -#define I2C_INT MX1_I2C_INT +#define I2C_INT MX1_INT_I2C #define CSPI_INT MX1_CSPI_INT #define SSI_TX_INT MX1_SSI_TX_INT #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 7516f2949af..2f2aad1032c 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -11,6 +11,10 @@ #define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX25_AVIC_SIZE SZ_1M +#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) +#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) +#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) +#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) #define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) #define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) @@ -30,7 +34,12 @@ #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 #define MX25_AUDMUX_BASE_ADDR 0x43fb0000 +#define MX25_UART3_BASE_ADDR 0x5000c000 +#define MX25_UART4_BASE_ADDR 0x50008000 +#define MX25_UART5_BASE_ADDR 0x5002c000 +#define MX25_CSPI3_BASE_ADDR 0x50004000 +#define MX25_CSPI2_BASE_ADDR 0x50010000 #define MX25_FEC_BASE_ADDR 0x50038000 #define MX25_SSI2_BASE_ADDR 0x50014000 #define MX25_SSI1_BASE_ADDR 0x50034000 @@ -41,14 +50,25 @@ #define MX25_OTG_BASE_ADDR 0x53ff4000 #define MX25_CSI_BASE_ADDR 0x53ff8000 -#define MX25_INT_SSI2 11 -#define MX25_INT_SSI1 12 -#define MX25_INT_CSI 17 -#define MX25_INT_DRYICE 25 -#define MX25_INT_NANDFC 33 -#define MX25_INT_LCDC 39 -#define MX25_INT_KPP 24 -#define MX25_INT_FEC 57 +#define MX25_INT_CSPI3 0 +#define MX25_INT_I2C1 3 +#define MX25_INT_I2C2 4 +#define MX25_INT_UART4 5 +#define MX25_INT_I2C3 10 +#define MX25_INT_SSI2 11 +#define MX25_INT_SSI1 12 +#define MX25_INT_CSPI2 13 +#define MX25_INT_CSPI1 14 +#define MX25_INT_CSI 17 +#define MX25_INT_UART3 18 +#define MX25_INT_KPP 24 +#define MX25_INT_DRYICE 25 +#define MX25_INT_UART2 32 +#define MX25_INT_NANDFC 33 +#define MX25_INT_LCDC 39 +#define MX25_INT_UART5 40 +#define MX25_INT_UART1 45 +#define MX25_INT_FEC 57 #if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) #define UART1_BASE_ADDR MX25_UART1_BASE_ADDR diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index bae9cd75bee..a8ab2e02a8c 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -48,7 +48,7 @@ #define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) #define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) #define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) -#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) #define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) #define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) #define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) @@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_SDHC3 9 #define MX27_INT_SDHC2 10 #define MX27_INT_SDHC1 11 -#define MX27_INT_I2C 12 +#define MX27_INT_I2C1 12 #define MX27_INT_SSI2 13 #define MX27_INT_SSI1 14 #define MX27_INT_CSPI2 15 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index fb90e119c2b..afee3ab9d62 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -23,7 +23,7 @@ #define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) #define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) #define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) -#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) #define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) #define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) #define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) @@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_FIRI 7 #define MX31_INT_MMC_SDHC2 8 #define MX31_INT_MMC_SDHC1 9 -#define MX31_INT_I2C 10 +#define MX31_INT_I2C1 10 #define MX31_INT_SSI2 11 #define MX31_INT_SSI1 12 #define MX31_INT_CSPI2 13 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 526a55842ae..cda60c71512 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -18,7 +18,7 @@ #define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) #define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) #define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) -#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) #define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) #define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) #define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) @@ -123,7 +123,7 @@ #define MX35_INT_MMC_SDHC1 7 #define MX35_INT_MMC_SDHC2 8 #define MX35_INT_MMC_SDHC3 9 -#define MX35_INT_I2C 10 +#define MX35_INT_I2C1 10 #define MX35_INT_SSI1 11 #define MX35_INT_SSI2 12 #define MX35_INT_CSPI2 13 diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h index 36d7ff27b5e..f226ee3777e 100644 --- a/arch/arm/plat-mxc/include/mach/mx3_camera.h +++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _MX3_CAMERA_H_ diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 5182b986b78..0ca3101ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_MXC91231_H__ #define __MACH_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 2d74748c5db..04c0d060d81 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -23,9 +23,9 @@ #include <linux/mtd/partitions.h> struct mxc_nand_platform_data { - int width; /* data bus width in bytes */ - int hw_ecc:1; /* 0 if supress hardware ECC */ - int flash_bbt:1; /* set to 1 to use a flash based bbt */ + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ }; diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index ef00199568d..4acd1143a9b 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 024416ed11c..2d9624697cc 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_TIMEX_H__ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index b6d3d0fddc4..d9bd37e4667 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ #define __ASM_ARCH_MXC_UNCOMPRESS_H__ diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h index 44243a27843..ef6379c474b 100644 --- a/arch/arm/plat-mxc/include/mach/vmalloc.h +++ b/arch/arm/plat-mxc/include/mach/vmalloc.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 778ddfe57d8..7331f2ace5f 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); - /* init architectures chained interrupt handler */ - mxc_register_gpios(); - #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 97f42799fa5..925bce4607e 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 9b86d2a60d4..b3da9aad429 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase) set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - mxc_register_gpios(); - pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index dc2ac42d631..393e9219a5b 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -624,79 +624,58 @@ do { \ __raw_writel(l, base + reg); \ } while(0) -void omap_set_gpio_debounce(int gpio, int enable) +/** + * _set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps so we need + * to convert and round up to the closest unit. + */ +static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, + unsigned debounce) { - struct gpio_bank *bank; - void __iomem *reg; - unsigned long flags; - u32 val, l = 1 << get_gpio_index(gpio); + void __iomem *reg = bank->base; + u32 val; + u32 l; + + if (debounce < 32) + debounce = 0x01; + else if (debounce > 7936) + debounce = 0xff; + else + debounce = (debounce / 0x1f) - 1; - if (cpu_class_is_omap1()) - return; + l = 1 << get_gpio_index(gpio); - bank = get_gpio_bank(gpio); - reg = bank->base; + if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_DEBOUNCINGTIME; + else + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + + __raw_writel(debounce, reg); + reg = bank->base; if (cpu_is_omap44xx()) reg += OMAP4_GPIO_DEBOUNCENABLE; else reg += OMAP24XX_GPIO_DEBOUNCE_EN; - if (!(bank->mod_usage & l)) { - printk(KERN_ERR "GPIO %d not requested\n", gpio); - return; - } - - spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); - if (enable && !(val & l)) + if (debounce) { val |= l; - else if (!enable && (val & l)) - val &= ~l; - else - goto done; - - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - bank->dbck_enable_mask = val; - if (enable) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_enable(bank->dbck); - else + } else { + val &= ~l; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_disable(bank->dbck); } __raw_writel(val, reg); -done: - spin_unlock_irqrestore(&bank->lock, flags); } -EXPORT_SYMBOL(omap_set_gpio_debounce); - -void omap_set_gpio_debounce_time(int gpio, int enc_time) -{ - struct gpio_bank *bank; - void __iomem *reg; - - if (cpu_class_is_omap1()) - return; - - bank = get_gpio_bank(gpio); - reg = bank->base; - - if (!bank->mod_usage) { - printk(KERN_ERR "GPIO not requested\n"); - return; - } - - enc_time &= 0xff; - - if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(enc_time, reg); -} -EXPORT_SYMBOL(omap_set_gpio_debounce_time); #ifdef CONFIG_ARCH_OMAP2PLUS static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, @@ -1656,6 +1635,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) return 0; } +static int gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_debounce(bank, offset, debounce); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_bank *bank; @@ -1909,6 +1902,7 @@ static int __init _omap_gpio_init(void) bank->chip.direction_input = gpio_input; bank->chip.get = gpio_get; bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; bank->chip.set = gpio_set; bank->chip.to_irq = gpio_2irq; if (bank_is_mpuio(bank)) { diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 5cb2dd1da63..11d6a1bbd90 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -29,3 +29,4 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440. diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 24a931fd8d3..b5e255265f2 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_vpll, &clk_arm, &clk_vpll, + &clk_xusbxti, }; void __init s5p_register_clocks(unsigned long xtal_freq) diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 9ff3d718be3..3fb3a3a1746 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -87,4 +87,11 @@ #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ + : ((x) - 16 + S5P_EINT_BASE2)) + +#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ + ((irq) - S5P_EINT_BASE1) : \ + ((irq) + 16 - S5P_EINT_BASE2)) + #endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index eaa70aa0127..e56c8075df9 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -60,7 +60,7 @@ static void s5p_irq_eint_maskack(unsigned int irq) static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) { - int offs = eint_offset(irq); + int offs = EINT_OFFSET(irq); int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -139,17 +139,16 @@ static struct irq_chip s5p_irq_eint = { */ static inline void s5p_irq_demux_eint(unsigned int start) { - u32 status; + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); unsigned int irq; - status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); status &= ~mask; status &= 0xff; while (status) { - irq = fls(status); - generic_handle_irq(irq - 1 + start); + irq = fls(status) - 1; + generic_handle_irq(irq + start); status &= ~(1 << irq); } } @@ -162,12 +161,18 @@ static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) static inline void s5p_irq_vic_eint_mask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_mask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR); } static void s5p_irq_vic_eint_unmask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_unmask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE); } static inline void s5p_irq_vic_eint_ack(unsigned int irq) diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 34efdd2b032..db4112c6f2b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -43,6 +43,11 @@ struct s3c_gpio_chip; * layouts. Provide an point to vector control routine and provide any * per-bank configuration information that other systems such as the * external interrupt code will need. + * + * @sa s3c_gpio_cfgpin + * @sa s3c_gpio_getcfg + * @sa s3c_gpio_setpull + * @sa s3c_gpio_getpull */ struct s3c_gpio_cfg { unsigned int cfg_eint; @@ -70,11 +75,25 @@ struct s3c_gpio_cfg { /** * s3c_gpio_cfgpin() - Change the GPIO function of a pin. * @pin pin The pin number to configure. - * @pin to The configuration for the pin's function. + * @to to The configuration for the pin's function. * * Configure which function is actually connected to the external * pin, such as an gpio input, output or some form of special function * connected to an internal peripheral block. + * + * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT + * or S3C_GPIO_SFN() to indicate one of the possible values that the helper + * will then generate the correct bit mask and shift for the configuration. + * + * If a bank of GPIOs all needs to be set to special-function 2, then + * the following code will work: + * + * for (gpio = start; gpio < end; gpio++) + * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + * + * The @to parameter can also be a specific value already shifted to the + * correct position in the control register, although these are discouraged + * in newer kernels and are only being kept for compatibility. */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); @@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin); * This function sets the state of the pull-{up,down} resistor for the * specified pin. It will return 0 if successfull, or a negative error * code if the pin cannot support the requested pull setting. + * + * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); |