diff options
Diffstat (limited to 'arch/arm')
71 files changed, 559 insertions, 458 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43594d5116e..cd5c1c97b04 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2064,8 +2064,7 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. + initially work for you. config ATAGS_PROC bool "Export atags in procfs" diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 444b4ede0d6..d318987d44a 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -120,6 +120,35 @@ status = "okay"; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + i2c0: i2c@44e0b000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 3aee1a43782..e8ec8756e49 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -171,6 +171,35 @@ }; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + i2c1: i2c@4802a000 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0c8ad173d2b..4f339fa91c5 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "TI AM335x EVM-SK"; @@ -207,6 +208,22 @@ }; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + }; + epwmss2: epwmss@48304000 { status = "okay"; @@ -298,7 +315,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&ecap2 0 50000 1>; + pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 58 61 66 75 90 125 170 255>; default-brightness-level = <8>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 38b446ba1ce..f9c5da9c7fe 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -26,6 +26,10 @@ serial5 = &uart5; d_can0 = &dcan0; d_can1 = &dcan1; + usb0 = &usb0; + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; }; cpus { @@ -333,21 +337,132 @@ status = "disabled"; }; - usb@47400000 { - compatible = "ti,musb-am33xx"; - reg = <0x47400000 0x1000 /* usbss */ - 0x47401000 0x800 /* musb instance 0 */ - 0x47401800 0x800>; /* musb instance 1 */ - interrupts = <17 /* usbss */ - 18 /* musb instance 0 */ - 19>; /* musb instance 1 */ - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - port0-mode = <3>; - port1-mode = <3>; - power = <250>; + usb: usb@47400000 { + compatible = "ti,am33xx-usb"; + reg = <0x47400000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; ti,hwmods = "usb_otg_hs"; + status = "disabled"; + + ctrl_mod: control@44e10000 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x44e10620 0x10 + 0x44e10648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + status = "disabled"; + }; + + usb0_phy: usb-phy@47401300 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401300 0x100>; + reg-names = "phy"; + status = "disabled"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb0_phy>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + usb1_phy: usb-phy@47401b00 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401b00 0x100>; + reg-names = "phy"; + status = "disabled"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb1_phy>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@07402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; + status = "disabled"; + }; }; epwmss0: epwmss@48300000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d59b70c6a6a..3d77dbe406f 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -14,11 +14,11 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; memory { - reg = <0x20000000 0x10000000>; + reg = <0x20000000 0x8000000>; }; clocks { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index b753855b205..49e3c45818c 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -94,8 +94,9 @@ usb0: ohci@00600000 { status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ + &pioD 19 GPIO_ACTIVE_LOW &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index a0f2721ea58..8678e0c1111 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -329,6 +329,12 @@ sirf,function = "uart0"; }; }; + uart0_noflow_pins_a: uart0@1 { + uart { + sirf,pins = "uart0_nostreamctrlgrp"; + sirf,function = "uart0_nostreamctrl"; + }; + }; uart1_pins_a: uart1@0 { uart { sirf,pins = "uart1grp"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index ef57277fc38..376090f0723 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -405,7 +405,7 @@ }; i2s0: i2s@03830000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -415,16 +415,13 @@ <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,supports-6ch; - samsung,supports-rstclr; - samsung,supports-secdai; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; }; i2s1: i2s@12D60000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s3c6410-i2s"; reg = <0x12D60000 0x100>; dmas = <&pdma1 12 &pdma1 11>; @@ -436,7 +433,7 @@ }; i2s2: i2s@12D70000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s3c6410-i2s"; reg = <0x12D70000 0x100>; dmas = <&pdma0 12 &pdma0 11>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index ff7f5d85584..586134e2a38 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -248,6 +248,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 53>; + num-lanes = <4>; }; pcie@2a0000 { @@ -267,5 +268,6 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 56>; + num-lanes = <4>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e035f4664b9..15715d921d1 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -220,6 +220,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index cdc010e0f93..386d4287021 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -38,7 +38,7 @@ }; serial@19c40000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; interrupts = <0 195 0x0>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 9c1167b0459..93e9f7e0b7a 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -38,7 +38,7 @@ }; serial@16440000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; interrupts = <0 154 0x0>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e643620417a..07be2cd7b31 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -644,7 +644,7 @@ utmi-mode = <2>; ranges; dwc3@4a030000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x4a030000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 365760b33a2..c8242533268 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -566,7 +566,6 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; dr_mode = "otg"; }; @@ -830,6 +829,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 24 0>; /* PD0 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index ed4b901b022..1e9d33adb92 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -312,7 +312,6 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -412,6 +411,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 170 0>; /* PV2 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ab67c94db28..c703197dca6 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -509,7 +509,6 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -519,7 +518,6 @@ usb@c5008000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>; }; usb-phy@c5008000 { @@ -588,6 +586,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + regulator-always-on; + regulator-boot-on; }; vbus3_reg: regulator@3 { @@ -598,6 +598,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9653fd8288d..e4570834512 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -477,13 +477,13 @@ <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <1>; - xcvr_lsrslew = <1>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; status = "disabled"; }; @@ -527,13 +527,13 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <2>; - xcvr_lsrslew = <2>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index 90e913fb64b..7a563d2523b 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -11,13 +11,14 @@ /dts-v1/; /include/ "wm8850.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "Wondermedia WM8850-W70v2 Tablet"; backlight { compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 1>; /* duty inverted */ + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 40 60 80 100 130 190 255>; default-brightness-level = <5>; diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 62e968cac9d..1f36b823905 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -104,6 +104,7 @@ CONFIG_IP_SCTP=y CONFIG_VLAN_8021Q=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 92ba100e9e3..056b27aafbe 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -78,6 +78,7 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 1effb43dab8..92d0a149aeb 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -79,6 +79,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index e406d575c94..5665134bfa3 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -17,7 +17,8 @@ int arch_timer_arch_init(void); * nicely work out which register we want, and chuck away the rest of * the code. At least it does so with a recent GCC (4.6.3). */ -static inline void arch_timer_reg_write(const int access, const int reg, u32 val) +static __always_inline +void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val) { if (access == ARCH_TIMER_PHYS_ACCESS) { switch (reg) { @@ -28,9 +29,7 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); break; } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { + } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); @@ -44,7 +43,8 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val isb(); } -static inline u32 arch_timer_reg_read(const int access, const int reg) +static __always_inline +u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg) { u32 val = 0; @@ -57,9 +57,7 @@ static inline u32 arch_timer_reg_read(const int access, const int reg) asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); break; } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { + } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h index 3ed37b4d93d..e072bb2ba1b 100644 --- a/arch/arm/include/asm/dma-contiguous.h +++ b/arch/arm/include/asm/dma-contiguous.h @@ -2,7 +2,7 @@ #define ASMARM_DMA_CONTIGUOUS_H #ifdef __KERNEL__ -#ifdef CONFIG_CMA +#ifdef CONFIG_DMA_CMA #include <linux/types.h> #include <asm-generic/dma-contiguous.h> diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 472ac709100..9b28c41f4ba 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -64,7 +64,7 @@ void kvm_clear_hyp_idmap(void); static inline void kvm_set_pte(pte_t *pte, pte_t new_pte) { - pte_val(*pte) = new_pte; + *pte = new_pte; /* * flush_pmd_entry just takes a void pointer and cleans the necessary * cache entries, so we can reuse the function for ptes. diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 261fcc82616..88e14d74b6d 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -525,11 +525,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) * Assign resources. */ pci_bus_assign_resources(bus); - - /* - * Enable bridges - */ - pci_enable_bridges(bus); } /* diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 5859c8bc727..2ee8a17d2b0 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -169,6 +169,11 @@ void __init arm_dt_init_cpu_maps(void) } } +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) +{ + return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu); +} + /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel * @dt_phys: physical address of dt blob diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index fc7920288a3..918875d96d5 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,7 +89,8 @@ void set_fiq_handler(void *start, unsigned int length) memcpy(base + offset, start, length); if (!cache_is_vipt_nonaliasing()) - flush_icache_range(base + offset, offset + length); + flush_icache_range((unsigned long)base + offset, offset + + length); flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index d7c82df6924..57221e349a7 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -82,6 +82,7 @@ void machine_crash_nonpanic_core(void *unused) crash_save_cpu(®s, smp_processor_id()); flush_cache_all(); + set_cpu_online(smp_processor_id(), false); atomic_dec(&waiting_for_crash_ipi); while (1) cpu_relax(); diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index c5a59546a25..85a87370f14 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -74,12 +74,8 @@ struct cpu_efficiency table_efficiency[] = { {NULL, }, }; -struct cpu_capacity { - unsigned long hwid; - unsigned long capacity; -}; - -struct cpu_capacity *cpu_capacity; +unsigned long *__cpu_capacity; +#define cpu_capacity(cpu) __cpu_capacity[cpu] unsigned long middle_capacity = 1; @@ -100,15 +96,19 @@ static void __init parse_dt_topology(void) unsigned long capacity = 0; int alloc_size, cpu = 0; - alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); - cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); + alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity); + __cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); - while ((cn = of_find_node_by_type(cn, "cpu"))) { - const u32 *rate, *reg; + for_each_possible_cpu(cpu) { + const u32 *rate; int len; - if (cpu >= num_possible_cpus()) - break; + /* too early to use cpu->of_node */ + cn = of_get_cpu_node(cpu, NULL); + if (!cn) { + pr_err("missing device node for CPU %d\n", cpu); + continue; + } for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++) if (of_device_is_compatible(cn, cpu_eff->compatible)) @@ -124,12 +124,6 @@ static void __init parse_dt_topology(void) continue; } - reg = of_get_property(cn, "reg", &len); - if (!reg || len != 4) { - pr_err("%s missing reg property\n", cn->full_name); - continue; - } - capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; /* Save min capacity of the system */ @@ -140,13 +134,9 @@ static void __init parse_dt_topology(void) if (capacity > max_capacity) max_capacity = capacity; - cpu_capacity[cpu].capacity = capacity; - cpu_capacity[cpu++].hwid = be32_to_cpup(reg); + cpu_capacity(cpu) = capacity; } - if (cpu < num_possible_cpus()) - cpu_capacity[cpu].hwid = (unsigned long)(-1); - /* If min and max capacities are equals, we bypass the update of the * cpu_scale because all CPUs have the same capacity. Otherwise, we * compute a middle_capacity factor that will ensure that the capacity @@ -154,9 +144,7 @@ static void __init parse_dt_topology(void) * SCHED_POWER_SCALE, which is the default value, but with the * constraint explained near table_efficiency[]. */ - if (min_capacity == max_capacity) - cpu_capacity[0].hwid = (unsigned long)(-1); - else if (4*max_capacity < (3*(max_capacity + min_capacity))) + if (4*max_capacity < (3*(max_capacity + min_capacity))) middle_capacity = (min_capacity + max_capacity) >> (SCHED_POWER_SHIFT+1); else @@ -170,23 +158,12 @@ static void __init parse_dt_topology(void) * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the * function returns directly for SMP system. */ -void update_cpu_power(unsigned int cpu, unsigned long hwid) +void update_cpu_power(unsigned int cpu) { - unsigned int idx = 0; - - /* look for the cpu's hwid in the cpu capacity table */ - for (idx = 0; idx < num_possible_cpus(); idx++) { - if (cpu_capacity[idx].hwid == hwid) - break; - - if (cpu_capacity[idx].hwid == -1) - return; - } - - if (idx == num_possible_cpus()) + if (!cpu_capacity(cpu)) return; - set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity); + set_power_scale(cpu, cpu_capacity(cpu) / middle_capacity); printk(KERN_INFO "CPU%u: update cpu_power %lu\n", cpu, arch_scale_freq_power(NULL, cpu)); @@ -194,7 +171,7 @@ void update_cpu_power(unsigned int cpu, unsigned long hwid) #else static inline void parse_dt_topology(void) {} -static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} +static inline void update_cpu_power(unsigned int cpuid) {} #endif /* @@ -281,7 +258,7 @@ void store_cpu_topology(unsigned int cpuid) update_siblings_masks(cpuid); - update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK); + update_cpu_power(cpuid); printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 741f66a2edb..9c697db2787 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -219,6 +219,10 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } +void kvm_arch_memslots_updated(struct kvm *kvm) +{ +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_userspace_memory_region *mem, diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 4a519907043..db9cf692d4d 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -146,7 +146,11 @@ static bool pm_fake(struct kvm_vcpu *vcpu, #define access_pmintenclr pm_fake /* Architected CP15 registers. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + * CRn denotes the primary register number, but is copied to the CRm in the + * user space API for 64-bit register access in line with the terminology used + * in the ARM ARM. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit + * registers preceding 32-bit ones. */ static const struct coproc_reg cp15_regs[] = { /* CSSELR: swapped by interrupt.S. */ @@ -154,8 +158,8 @@ static const struct coproc_reg cp15_regs[] = { NULL, reset_unknown, c0_CSSELR }, /* TTBR0/TTBR1: swapped by interrupt.S. */ - { CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 }, - { CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 }, + { CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 }, + { CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 }, /* TTBCR: swapped by interrupt.S. */ { CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32, @@ -182,7 +186,7 @@ static const struct coproc_reg cp15_regs[] = { NULL, reset_unknown, c6_IFAR }, /* PAR swapped by interrupt.S */ - { CRn( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR }, + { CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR }, /* * DC{C,I,CI}SW operations: @@ -399,12 +403,13 @@ static bool index_to_params(u64 id, struct coproc_params *params) | KVM_REG_ARM_OPC1_MASK)) return false; params->is_64bit = true; - params->CRm = ((id & KVM_REG_ARM_CRM_MASK) + /* CRm to CRn: see cp15_to_index for details */ + params->CRn = ((id & KVM_REG_ARM_CRM_MASK) >> KVM_REG_ARM_CRM_SHIFT); params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) >> KVM_REG_ARM_OPC1_SHIFT); params->Op2 = 0; - params->CRn = 0; + params->CRm = 0; return true; default: return false; @@ -898,7 +903,14 @@ static u64 cp15_to_index(const struct coproc_reg *reg) if (reg->is_64) { val |= KVM_REG_SIZE_U64; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); - val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT); + /* + * CRn always denotes the primary coproc. reg. nr. for the + * in-kernel representation, but the user space API uses the + * CRm for the encoding, because it is modelled after the + * MRRC/MCRR instructions: see the ARM ARM rev. c page + * B3-1445 + */ + val |= (reg->CRn << KVM_REG_ARM_CRM_SHIFT); } else { val |= KVM_REG_SIZE_U32; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index b7301d3e479..0461d5c8d3d 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -135,6 +135,8 @@ static inline int cmp_reg(const struct coproc_reg *i1, return -1; if (i1->CRn != i2->CRn) return i1->CRn - i2->CRn; + if (i1->is_64 != i2->is_64) + return i2->is_64 - i1->is_64; if (i1->CRm != i2->CRm) return i1->CRm - i2->CRm; if (i1->Op1 != i2->Op1) @@ -145,6 +147,7 @@ static inline int cmp_reg(const struct coproc_reg *i1, #define CRn(_x) .CRn = _x #define CRm(_x) .CRm = _x +#define CRm64(_x) .CRn = _x, .CRm = 0 #define Op1(_x) .Op1 = _x #define Op2(_x) .Op2 = _x #define is64 .is_64 = true diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c index 685063a6d0c..cf93472b9dd 100644 --- a/arch/arm/kvm/coproc_a15.c +++ b/arch/arm/kvm/coproc_a15.c @@ -114,7 +114,11 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu, /* * A15-specific CP15 registers. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + * CRn denotes the primary register number, but is copied to the CRm in the + * user space API for 64-bit register access in line with the terminology used + * in the ARM ARM. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit + * registers preceding 32-bit ones. */ static const struct coproc_reg a15_regs[] = { /* MPIDR: we use VMPIDR for guest access. */ diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 16cd4ba5d7f..85dd84b1068 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -492,10 +492,10 @@ __kvm_hyp_code_end: .section ".rodata" und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x" + .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x" + .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x" + .ascii "unexpected data abort in Hyp mode at: %#08x\n" svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x" + .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index b8e06b7a283..0c25d9487d5 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -63,7 +63,8 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_exit_mmio *mmio) { - unsigned long rt, len; + unsigned long rt; + int len; bool is_write, sign_extend; if (kvm_vcpu_dabt_isextabt(vcpu)) { diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index ca6bea4859b..0988d9e04dd 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -85,6 +85,12 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } +static bool page_empty(void *ptr) +{ + struct page *ptr_page = virt_to_page(ptr); + return page_count(ptr_page) == 1; +} + static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); @@ -103,12 +109,6 @@ static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) put_page(virt_to_page(pmd)); } -static bool pmd_empty(pmd_t *pmd) -{ - struct page *pmd_page = virt_to_page(pmd); - return page_count(pmd_page) == 1; -} - static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { @@ -118,12 +118,6 @@ static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) } } -static bool pte_empty(pte_t *pte) -{ - struct page *pte_page = virt_to_page(pte); - return page_count(pte_page) == 1; -} - static void unmap_range(struct kvm *kvm, pgd_t *pgdp, unsigned long long start, u64 size) { @@ -132,37 +126,37 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp, pmd_t *pmd; pte_t *pte; unsigned long long addr = start, end = start + size; - u64 range; + u64 next; while (addr < end) { pgd = pgdp + pgd_index(addr); pud = pud_offset(pgd, addr); if (pud_none(*pud)) { - addr += PUD_SIZE; + addr = pud_addr_end(addr, end); continue; } pmd = pmd_offset(pud, addr); if (pmd_none(*pmd)) { - addr += PMD_SIZE; + addr = pmd_addr_end(addr, end); continue; } pte = pte_offset_kernel(pmd, addr); clear_pte_entry(kvm, pte, addr); - range = PAGE_SIZE; + next = addr + PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ - if (pte_empty(pte)) { + if (page_empty(pte)) { clear_pmd_entry(kvm, pmd, addr); - range = PMD_SIZE; - if (pmd_empty(pmd)) { + next = pmd_addr_end(addr, end); + if (page_empty(pmd) && !page_empty(pud)) { clear_pud_entry(kvm, pud, addr); - range = PUD_SIZE; + next = pud_addr_end(addr, end); } } - addr += range; + addr = next; } } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index b7840e7aa45..71e08baee20 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -40,7 +40,7 @@ static struct kvm_regs a15_regs_reset = { }; static const struct kvm_irq_level a15_vtimer_irq = { - .irq = 27, + { .irq = 27 }, .level = 1, }; diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index a8e73ed5ad5..b1d640f7862 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -59,10 +59,9 @@ TRACE_EVENT(kvm_guest_fault, __entry->ipa = ipa; ), - TP_printk("guest fault at PC %#08lx (hxfar %#08lx, " - "ipa %#16llx, hsr %#08lx", - __entry->vcpu_pc, __entry->hxfar, - __entry->ipa, __entry->hsr) + TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#08lx", + __entry->ipa, __entry->hsr, + __entry->hxfar, __entry->vcpu_pc) ); TRACE_EVENT(kvm_irq_line, diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 2abee6626aa..916e5a14291 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -227,6 +227,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h index 8e7ed5c9081..048a57f76bd 100644 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ b/arch/arm/mach-at91/include/mach/at91_adc.h @@ -28,9 +28,12 @@ #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) #define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) #define AT91_ADC_STARTUP_(x) ((x) << 16) #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ #define AT91_ADC_SHTIM_(x) ((x) << 24) @@ -48,6 +51,9 @@ #define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ #define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ +#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ +#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ + #define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ #define AT91_ADC_LDATA (0x3ff) @@ -58,4 +64,10 @@ #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ #define AT91_ADC_DATA (0x3ff) +#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ + +#define AT91_ADC_TRGR_9260 AT91_ADC_MR +#define AT91_ADC_TRGR_9G45 0x08 +#define AT91_ADC_TRGR_9X5 0xC0 + #endif diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index dff4ddc5ef8..139e42da25f 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -75,6 +75,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW_SYNDROME, + .ecc_bits = 4, .bbt_options = NAND_BBT_USE_FLASH, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a33686a6fbb..fa4bfaf952d 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -153,6 +153,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .bbt_options = NAND_BBT_USE_FLASH, .timing = &davinci_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fbb8e5ab1dc..0c005e876ca 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -90,6 +90,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .options = 0, }; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 2bc112adf56..808233b60e3 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -88,6 +88,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { .parts = davinci_ntosd2_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .bbt_options = NAND_BBT_USE_FLASH, }; diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 36aef3a7ded..f1ac1c94ac0 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -65,7 +65,7 @@ static struct cpuidle_driver davinci_idle_driver = { .states[1] = { .enter = davinci_enter_idle, .exit_latency = 10, - .target_residency = 100000, + .target_residency = 10000, .flags = CPUIDLE_FLAG_TIME_VALID, .name = "DDR SR", .desc = "WFI and DDR Self Refresh", diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 00247c77131..304f069ebf5 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -108,8 +108,8 @@ static void __init dove_clk_init(void) orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); orion_clkdev_add(NULL, "orion_nand", nand); orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); - orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); - orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mvebu-audio.0", i2s0); + orion_clkdev_add(NULL, "mvebu-audio.1", i2s1); orion_clkdev_add(NULL, "mv_crypto", crypto); orion_clkdev_add(NULL, "dove-ac97", ac97); orion_clkdev_add(NULL, "dove-pdma", pdma); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 7be13f8e69a..a02f275a198 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -254,13 +254,12 @@ static void __init imx6q_opp_init(struct device *cpu_dev) { struct device_node *np; - np = of_find_node_by_path("/cpus/cpu@0"); + np = of_node_get(cpu_dev->of_node); if (!np) { pr_warn("failed to find cpu0 node\n"); return; } - cpu_dev->of_node = np; if (of_init_opp_table(cpu_dev)) { pr_warn("failed to init OPP table\n"); goto put_node; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e9238b5567e..1663de09098 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -264,7 +264,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); - orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, "mvebu-audio", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); @@ -560,7 +560,7 @@ void __init kirkwood_timer_init(void) /***************************************************************************** * Audio ****************************************************************************/ -static struct resource kirkwood_i2s_resources[] = { +static struct resource kirkwood_audio_resources[] = { [0] = { .start = AUDIO_PHYS_BASE, .end = AUDIO_PHYS_BASE + SZ_16K - 1, @@ -573,29 +573,23 @@ static struct resource kirkwood_i2s_resources[] = { }, }; -static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { +static struct kirkwood_asoc_platform_data kirkwood_audio_data = { .burst = 128, }; -static struct platform_device kirkwood_i2s_device = { - .name = "kirkwood-i2s", +static struct platform_device kirkwood_audio_device = { + .name = "mvebu-audio", .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_i2s_resources), - .resource = kirkwood_i2s_resources, + .num_resources = ARRAY_SIZE(kirkwood_audio_resources), + .resource = kirkwood_audio_resources, .dev = { - .platform_data = &kirkwood_i2s_data, + .platform_data = &kirkwood_audio_data, }, }; -static struct platform_device kirkwood_pcm_device = { - .name = "kirkwood-pcm-audio", - .id = -1, -}; - void __init kirkwood_audio_init(void) { - platform_device_register(&kirkwood_i2s_device); - platform_device_register(&kirkwood_pcm_device); + platform_device_register(&kirkwood_audio_device); } /***************************************************************************** diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 6d50fb96486..d83404d4b32 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -456,9 +456,9 @@ static struct clk_pcom_desc msm_clocks_7x01a[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, "msm_serial.0", OFF), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index d4db75acff5..14e286948f6 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -211,7 +211,7 @@ static struct clk_pcom_desc msm_clocks_7x30[] = { CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index f5518112284..2ed89b25d30 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -358,9 +358,9 @@ static struct clk_pcom_desc msm_clocks_8x50[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, NULL, OFF), - CLK_PCOM("uart_clk", UART2_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, NULL, OFF), + CLK_PCOM("core", UART2_CLK, NULL, 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index ce81d303140..594b63db421 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -29,45 +29,40 @@ #include "pmsu.h" #include "coherency.h" +static struct clk *__init get_cpu_clk(int cpu) +{ + struct clk *cpu_clk; + struct device_node *np = of_get_cpu_node(cpu, NULL); + + if (WARN(!np, "missing cpu node\n")) + return NULL; + cpu_clk = of_clk_get(np, 0); + if (WARN_ON(IS_ERR(cpu_clk))) + return NULL; + return cpu_clk; +} + void __init set_secondary_cpus_clock(void) { - int thiscpu; + int thiscpu, cpu; unsigned long rate; - struct clk *cpu_clk = NULL; - struct device_node *np = NULL; + struct clk *cpu_clk; thiscpu = smp_processor_id(); - for_each_node_by_type(np, "cpu") { - int err; - int cpu; - - err = of_property_read_u32(np, "reg", &cpu); - if (WARN_ON(err)) - return; - - if (cpu == thiscpu) { - cpu_clk = of_clk_get(np, 0); - break; - } - } - if (WARN_ON(IS_ERR(cpu_clk))) + cpu_clk = get_cpu_clk(thiscpu); + if (!cpu_clk) return; clk_prepare_enable(cpu_clk); rate = clk_get_rate(cpu_clk); /* set all the other CPU clk to the same rate than the boot CPU */ - for_each_node_by_type(np, "cpu") { - int err; - int cpu; - - err = of_property_read_u32(np, "reg", &cpu); - if (WARN_ON(err)) + for_each_possible_cpu(cpu) { + if (cpu == thiscpu) + continue; + cpu_clk = get_cpu_clk(cpu); + if (!cpu_clk) return; - - if (cpu != thiscpu) { - cpu_clk = of_clk_get(np, 0); - clk_set_rate(cpu_clk, rate); - } + clk_set_rate(cpu_clk, rate); } } diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index f6eeb87e4e9..827d15009a8 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -122,11 +122,7 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif .set_power = tusb_set_power, .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ .power = 100, /* Max 100 mA VBUS for host mode */ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index f7928054cc9..f26918467ef 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -290,7 +290,7 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; /* PHY's VCC regulator might be added later, so flag that we need it */ -static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { +static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { .needs_vcc = true, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 004c646fd0a..18143873346 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,7 +33,7 @@ #include <linux/i2c/twl.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/smsc911x.h> #include <linux/wl12xx.h> @@ -481,7 +481,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 9c2b180e0a9..de1bc6bbe58 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -339,7 +339,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index d2ea68ea678..7735105561d 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -85,7 +85,7 @@ static struct omap_board_mux board_mux[] __initdata = { static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, + .mode = MUSB_OTG, .power = 0, }; diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index d940e53dd9f..b456b4471f3 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -181,7 +181,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, sizeof(struct omap_i2c_bus_platform_data)); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } static int __init omap_i2c_cmdline(void) diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2eb19d4d0aa..e83a6a4b184 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/phy.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include "soc.h" #include "omap_device.h" @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -460,9 +460,9 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.name = nop_name; pdevinfo.id = phy->port; pdevinfo.data = phy->platform_data; - pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data); - - scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d", + pdevinfo.size_data = + sizeof(struct usb_phy_gen_xceiv_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 8c4de2708cf..bc897231bd1 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -38,11 +38,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif + /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 2c70f74fed5..e110b6d4ae8 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -42,7 +42,6 @@ static const char *atlas6_dt_match[] __initdata = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .nr_irqs = 128, .map_io = sirfsoc_map_io, .init_time = sirfsoc_init_time, .init_late = sirfsoc_init_late, @@ -59,7 +58,6 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .nr_irqs = 128, .map_io = sirfsoc_map_io, .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 0d1e4128d46..fc97cfd5276 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -29,7 +29,6 @@ #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/pda_power.h> -#include <linux/platform_data/tegra_usb.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/sys_soc.h> @@ -46,40 +45,6 @@ #include "fuse.h" #include "iomap.h" -static struct tegra_ehci_platform_data tegra_ehci1_pdata = { - .operating_mode = TEGRA_USB_OTG, - .power_down_on_bus_suspend = 1, - .vbus_gpio = -1, -}; - -static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { - .reset_gpio = -1, - .clk = "cdev2", -}; - -static struct tegra_ehci_platform_data tegra_ehci2_pdata = { - .phy_config = &tegra_ehci2_ulpi_phy_config, - .operating_mode = TEGRA_USB_HOST, - .power_down_on_bus_suspend = 1, - .vbus_gpio = -1, -}; - -static struct tegra_ehci_platform_data tegra_ehci3_pdata = { - .operating_mode = TEGRA_USB_HOST, - .power_down_on_bus_suspend = 1, - .vbus_gpio = -1, -}; - -static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0", - &tegra_ehci1_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1", - &tegra_ehci2_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2", - &tegra_ehci3_pdata), - {} -}; - static void __init tegra_dt_init(void) { struct soc_device_attribute *soc_dev_attr; @@ -112,8 +77,7 @@ static void __init tegra_dt_init(void) * devices */ out: - of_platform_populate(NULL, of_default_bus_match_table, - tegra20_auxdata_lookup, parent); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); } static void __init trimslice_init(void) diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index bf9b6be5b18..fe1f3e26b88 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,7 +4,6 @@ obj-y := cpu.o devices.o devices-common.o \ id.o usb.o timer.o pm.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c deleted file mode 100644 index a45dd09daed..00000000000 --- a/arch/arm/mach-ux500/cpuidle.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (c) 2012 Linaro : Daniel Lezcano <daniel.lezcano@linaro.org> (IBM) - * - * Based on the work of Rickard Andersson <rickard.andersson@stericsson.com> - * and Jonas Aaberg <jonas.aberg@stericsson.com>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/cpuidle.h> -#include <linux/spinlock.h> -#include <linux/atomic.h> -#include <linux/smp.h> -#include <linux/mfd/dbx500-prcmu.h> -#include <linux/platform_data/arm-ux500-pm.h> - -#include <asm/cpuidle.h> -#include <asm/proc-fns.h> - -#include "db8500-regs.h" -#include "id.h" - -static atomic_t master = ATOMIC_INIT(0); -static DEFINE_SPINLOCK(master_lock); - -static inline int ux500_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - int this_cpu = smp_processor_id(); - bool recouple = false; - - if (atomic_inc_return(&master) == num_online_cpus()) { - - /* With this lock, we prevent the other cpu to exit and enter - * this function again and become the master */ - if (!spin_trylock(&master_lock)) - goto wfi; - - /* decouple the gic from the A9 cores */ - if (prcmu_gic_decouple()) { - spin_unlock(&master_lock); - goto out; - } - - /* If an error occur, we will have to recouple the gic - * manually */ - recouple = true; - - /* At this state, as the gic is decoupled, if the other - * cpu is in WFI, we have the guarantee it won't be wake - * up, so we can safely go to retention */ - if (!prcmu_is_cpu_in_wfi(this_cpu ? 0 : 1)) - goto out; - - /* The prcmu will be in charge of watching the interrupts - * and wake up the cpus */ - if (prcmu_copy_gic_settings()) - goto out; - - /* Check in the meantime an interrupt did - * not occur on the gic ... */ - if (prcmu_gic_pending_irq()) - goto out; - - /* ... and the prcmu */ - if (prcmu_pending_irq()) - goto out; - - /* Go to the retention state, the prcmu will wait for the - * cpu to go WFI and this is what happens after exiting this - * 'master' critical section */ - if (prcmu_set_power_state(PRCMU_AP_IDLE, true, true)) - goto out; - - /* When we switch to retention, the prcmu is in charge - * of recoupling the gic automatically */ - recouple = false; - - spin_unlock(&master_lock); - } -wfi: - cpu_do_idle(); -out: - atomic_dec(&master); - - if (recouple) { - prcmu_gic_recouple(); - spin_unlock(&master_lock); - } - - return index; -} - -static struct cpuidle_driver ux500_idle_driver = { - .name = "ux500_idle", - .owner = THIS_MODULE, - .states = { - ARM_CPUIDLE_WFI_STATE, - { - .enter = ux500_enter_idle, - .exit_latency = 70, - .target_residency = 260, - .flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_TIMER_STOP, - .name = "ApIdle", - .desc = "ARM Retention", - }, - }, - .safe_state_index = 0, - .state_count = 2, -}; - -int __init ux500_idle_init(void) -{ - if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) - return -ENODEV; - - /* Configure wake up reasons */ - prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | - PRCMU_WAKEUP(ABB)); - - return cpuidle_register(&ux500_idle_driver, NULL); -} - -device_initcall(ux500_idle_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index db5c2cab8fd..cd2c88e7a8f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -809,15 +809,18 @@ config KUSER_HELPERS the CPU type fitted to the system. This permits binaries to be run on ARMv4 through to ARMv7 without modification. + See Documentation/arm/kernel_user_helpers.txt for details. + However, the fixed address nature of these helpers can be used by ROP (return orientated programming) authors when creating exploits. If all of the binaries and libraries which run on your platform are built specifically for your platform, and make no use of - these helpers, then you can turn this option off. However, - when such an binary or library is run, it will receive a SIGILL - signal, which will terminate the program. + these helpers, then you can turn this option off to hinder + such exploits. However, in that case, if a binary or library + relying on those helpers is run, it will receive a SIGILL signal, + which will terminate the program. Say N here only if you are absolutely certain that you do not need these helpers; otherwise, the safe option is to say Y. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 7f9b1798c6c..dbddc07a3bb 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ static int __init atomic_pool_init(void) if (!pages) goto no_pages; - if (IS_ENABLED(CONFIG_CMA)) + if (IS_ENABLED(CONFIG_DMA_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else @@ -670,7 +670,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, addr = __alloc_simple_buffer(dev, size, gfp, &page); else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); - else if (!IS_ENABLED(CONFIG_CMA)) + else if (!IS_ENABLED(CONFIG_DMA_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page, caller); @@ -759,7 +759,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, __dma_free_buffer(page, size); } else if (__free_from_pool(cpu_addr, size)) { return; - } else if (!IS_ENABLED(CONFIG_CMA)) { + } else if (!IS_ENABLED(CONFIG_DMA_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 8e11e96eab5..c83f27b6bdd 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -30,6 +30,8 @@ #include <linux/platform_device.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -60,6 +62,30 @@ struct ssp_device *pxa_ssp_request(int port, const char *label) } EXPORT_SYMBOL(pxa_ssp_request); +struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node, + const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->of_node == of_node && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(pxa_ssp_request_of); + void pxa_ssp_free(struct ssp_device *ssp) { mutex_lock(&ssp_lock); @@ -72,96 +98,126 @@ void pxa_ssp_free(struct ssp_device *ssp) } EXPORT_SYMBOL(pxa_ssp_free); +#ifdef CONFIG_OF +static const struct of_device_id pxa_ssp_of_ids[] = { + { .compatible = "mrvl,pxa25x-ssp", .data = (void *) PXA25x_SSP }, + { .compatible = "mvrl,pxa25x-nssp", .data = (void *) PXA25x_NSSP }, + { .compatible = "mrvl,pxa27x-ssp", .data = (void *) PXA27x_SSP }, + { .compatible = "mrvl,pxa3xx-ssp", .data = (void *) PXA3xx_SSP }, + { .compatible = "mvrl,pxa168-ssp", .data = (void *) PXA168_SSP }, + { .compatible = "mrvl,pxa910-ssp", .data = (void *) PXA910_SSP }, + { .compatible = "mrvl,ce4100-ssp", .data = (void *) CE4100_SSP }, + { .compatible = "mrvl,lpss-ssp", .data = (void *) LPSS_SSP }, + { }, +}; +MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids); +#endif + static int pxa_ssp_probe(struct platform_device *pdev) { - const struct platform_device_id *id = platform_get_device_id(pdev); struct resource *res; struct ssp_device *ssp; - int ret = 0; + struct device *dev = &pdev->dev; - ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to allocate memory"); + ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) return -ENOMEM; - } - ssp->pdev = pdev; - ssp->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(ssp->clk)) { - ret = PTR_ERR(ssp->clk); - goto err_free; - } + ssp->pdev = pdev; - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - ssp->drcmr_rx = res->start; + ssp->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ssp->clk)) + return PTR_ERR(ssp->clk); + + if (dev->of_node) { + struct of_phandle_args dma_spec; + struct device_node *np = dev->of_node; + + /* + * FIXME: we should allocate the DMA channel from this + * context and pass the channel down to the ssp users. + * For now, we lookup the rx and tx indices manually + */ + + /* rx */ + of_parse_phandle_with_args(np, "dmas", "#dma-cells", + 0, &dma_spec); + ssp->drcmr_rx = dma_spec.args[0]; + of_node_put(dma_spec.np); + + /* tx */ + of_parse_phandle_with_args(np, "dmas", "#dma-cells", + 1, &dma_spec); + ssp->drcmr_tx = dma_spec.args[0]; + of_node_put(dma_spec.np); + } else { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(dev, "no SSP RX DRCMR defined\n"); + return -ENODEV; + } + ssp->drcmr_rx = res->start; - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_clk; + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(dev, "no SSP TX DRCMR defined\n"); + return -ENODEV; + } + ssp->drcmr_tx = res->start; } - ssp->drcmr_tx = res->start; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; + dev_err(dev, "no memory resource defined\n"); + return -ENODEV; } - res = request_mem_region(res->start, resource_size(res), - pdev->name); + res = devm_request_mem_region(dev, res->start, resource_size(res), + pdev->name); if (res == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; + dev_err(dev, "failed to request memory resource\n"); + return -EBUSY; } ssp->phys_base = res->start; - ssp->mmio_base = ioremap(res->start, resource_size(res)); + ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res)); if (ssp->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; + dev_err(dev, "failed to ioremap() registers\n"); + return -ENODEV; } ssp->irq = platform_get_irq(pdev, 0); if (ssp->irq < 0) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - ret = -ENODEV; - goto err_free_io; + dev_err(dev, "no IRQ resource defined\n"); + return -ENODEV; + } + + if (dev->of_node) { + const struct of_device_id *id = + of_match_device(of_match_ptr(pxa_ssp_of_ids), dev); + ssp->type = (int) id->data; + } else { + const struct platform_device_id *id = + platform_get_device_id(pdev); + ssp->type = (int) id->driver_data; + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; } - /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id - * starts from 0, do a translation here - */ - ssp->port_id = pdev->id + 1; ssp->use_count = 0; - ssp->type = (int)id->driver_data; + ssp->of_node = dev->of_node; mutex_lock(&ssp_lock); list_add(&ssp->node, &ssp_list); mutex_unlock(&ssp_lock); platform_set_drvdata(pdev, ssp); - return 0; -err_free_io: - iounmap(ssp->mmio_base); -err_free_mem: - release_mem_region(res->start, resource_size(res)); -err_free_clk: - clk_put(ssp->clk); -err_free: - kfree(ssp); - return ret; + return 0; } static int pxa_ssp_remove(struct platform_device *pdev) @@ -201,8 +257,9 @@ static struct platform_driver pxa_ssp_driver = { .probe = pxa_ssp_probe, .remove = pxa_ssp_remove, .driver = { - .owner = THIS_MODULE, - .name = "pxa2xx-ssp", + .owner = THIS_MODULE, + .name = "pxa2xx-ssp", + .of_match_table = of_match_ptr(pxa_ssp_of_ids), }, .id_table = ssp_id_table, }; diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 3e5c4619caa..50a3ea0037d 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -55,12 +55,13 @@ void __init s3c_init_cpu(unsigned long idcode, printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); - if (cpu->map_io == NULL || cpu->init == NULL) { + if (cpu->init == NULL) { printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); panic("Unsupported Samsung CPU"); } - cpu->map_io(); + if (cpu->map_io) + cpu->map_io(); } /* s3c24xx_init_clocks diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index 0cc40aea3f5..98b10ba67dc 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -82,7 +82,8 @@ static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param) static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) { struct cb_data *data; - int len = (param->cap == DMA_CYCLIC) ? param->period : param->len; + dma_addr_t pos = param->buf; + dma_addr_t end = param->buf + param->len; list_for_each_entry(data, &dma_list, node) if (data->ch == ch) @@ -94,7 +95,15 @@ static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) data->fp_param = param->fp_param; } - s3c2410_dma_enqueue(ch, (void *)data, param->buf, len); + if (param->cap != DMA_CYCLIC) { + s3c2410_dma_enqueue(ch, (void *)data, param->buf, param->len); + return 0; + } + + while (pos < end) { + s3c2410_dma_enqueue(ch, (void *)data, pos, param->period); + pos += param->period; + } return 0; } diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index c9770ba5c7d..8a6295c8620 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -170,6 +170,7 @@ static void __init xen_percpu_init(void *unused) per_cpu(xen_vcpu, cpu) = vcpup; enable_percpu_irq(xen_events_irq, 0); + put_cpu(); } static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) |