diff options
Diffstat (limited to 'arch/arm')
743 files changed, 9639 insertions, 12624 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a94a09ba356..bcc06700634 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,7 +3,7 @@ config ARM default y select HAVE_AOUT select HAVE_DMA_API_DEBUG - select HAVE_IDE + select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -226,6 +226,10 @@ config PHYS_OFFSET Please provide the physical address corresponding to the location of main memory in your system. +config GENERIC_BUG + def_bool y + depends on BUG + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -359,7 +363,6 @@ config ARCH_GEMINI config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" select CPU_V7 - select GENERIC_TIME select NO_IOPORT select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP @@ -391,7 +394,7 @@ config ARCH_EP93XX select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_USES_GETTIMEOFFSET - select NEED_MEMORY_H + select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -400,6 +403,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select HAVE_IDE select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -539,7 +543,6 @@ config ARCH_LPC32XX select ARM_AMBA select USB_ARCH_HAS_OHCI select CLKDEV_LOOKUP - select GENERIC_TIME select GENERIC_CLOCKEVENTS help Support for the NXP LPC32XX family of processors @@ -607,19 +610,10 @@ config ARCH_W90X900 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> -config ARCH_NUC93X - bool "Nuvoton NUC93X CPU" - select CPU_ARM926T - select CLKDEV_LOOKUP - help - Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a - low-power and high performance MPEG-4/JPEG multimedia controller chip. - config ARCH_TEGRA bool "NVIDIA Tegra" select CLKDEV_LOOKUP select CLKSRC_MMIO - select GENERIC_TIME select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK @@ -652,6 +646,8 @@ config ARCH_PXA select SPARSE_IRQ select AUTO_ZRELADDR select MULTI_IRQ_HANDLER + select ARM_CPU_SUSPEND if PM + select HAVE_IDE help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -693,6 +689,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select HAVE_IDE select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and @@ -712,6 +709,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE select NEED_MACH_MEMORY_H help Support for StrongARM 11x0 based boards. @@ -746,7 +744,6 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER - select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX @@ -857,11 +854,13 @@ config ARCH_U300 select HAVE_SCHED_CLOCK select HAVE_TCM select ARM_AMBA + select ARM_PATCH_PHYS_VIRT select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -938,7 +937,6 @@ config ARCH_VT8500 config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select CPU_V7 - select GENERIC_TIME select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select ARM_GIC @@ -1007,8 +1005,6 @@ source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/plat-nomadik/Kconfig" -source "arch/arm/mach-nuc93x/Kconfig" - source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" @@ -1403,6 +1399,7 @@ config SMP MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE + depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help @@ -1416,7 +1413,7 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also <file:Documentation/i386/IO-APIC.txt>, + See also <file:Documentation/x86/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://tldp.org/HOWTO/SMP-HOWTO.html>. @@ -1535,6 +1532,7 @@ config THUMB2_KERNEL depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED + select ARM_UNWIND help By enabling this option, the kernel will be compiled in Thumb-2 mode. A compiler/assembler that understand the unified @@ -2038,6 +2036,7 @@ config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x default y + select CPU_FREQ_TABLE select CPU_FREQ_DEFAULT_GOV_USERSPACE config CPU_FREQ_S3C @@ -2186,6 +2185,9 @@ config ARCH_SUSPEND_POSSIBLE CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y +config ARM_CPU_SUSPEND + def_bool PM_SLEEP + endmenu source "net/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index be3a0f78d91..64db5b1648e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,176 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + + config DEBUG_IMX1_UART + bool "i.MX1 Debug UART" + depends on SOC_IMX1 + help + Say Y here if you want kernel low-level debugging support + on i.MX1. + + config DEBUG_IMX23_UART + bool "i.MX23 Debug UART" + depends on SOC_IMX23 + help + Say Y here if you want kernel low-level debugging support + on i.MX23. + + config DEBUG_IMX25_UART + bool "i.MX25 Debug UART" + depends on SOC_IMX25 + help + Say Y here if you want kernel low-level debugging support + on i.MX25. + + config DEBUG_IMX21_IMX27_UART + bool "i.MX21 and i.MX27 Debug UART" + depends on SOC_IMX21 || SOC_IMX27 + help + Say Y here if you want kernel low-level debugging support + on i.MX21 or i.MX27. + + config DEBUG_IMX28_UART + bool "i.MX28 Debug UART" + depends on SOC_IMX28 + help + Say Y here if you want kernel low-level debugging support + on i.MX28. + + config DEBUG_IMX31_IMX35_UART + bool "i.MX31 and i.MX35 Debug UART" + depends on SOC_IMX31 || SOC_IMX35 + help + Say Y here if you want kernel low-level debugging support + on i.MX31 or i.MX35. + + config DEBUG_IMX51_UART + bool "i.MX51 Debug UART" + depends on SOC_IMX51 + help + Say Y here if you want kernel low-level debugging support + on i.MX51. + + config DEBUG_IMX50_IMX53_UART + bool "i.MX50 and i.MX53 Debug UART" + depends on SOC_IMX50 || SOC_IMX53 + help + Say Y here if you want kernel low-level debugging support + on i.MX50 or i.MX53. + + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_REALVIEW_STD_PORT + bool "RealView Default UART" + depends on ARCH_REALVIEW + help + Say Y here if you want the debug print routines to direct + their output to the serial port on RealView EB, PB11MP, PBA8 + and PBX platforms. + + config DEBUG_REALVIEW_PB1176_PORT + bool "RealView PB1176 UART" + depends on MACH_REALVIEW_PB1176 + help + Say Y here if you want the debug print routines to direct + their output to the standard serial port on the RealView + PB1176 platform. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,55 +243,14 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" - select ARM_AMBA + depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - -config DEBUG_S3C_UART - depends on PLAT_SAMSUNG - int "S3C UART to use for low-level debug" - default "0" - help - Choice for UART for kernel low-level using S3C UARTS, - should be between zero and two. The port must have been - initialised by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config ARM_KPROBES_TEST tristate "Kprobes test module" depends on KPROBES && MODULES diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8904caa736c..30b92014820 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -190,7 +190,6 @@ machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_VT8500) := vt8500 machine-$(CONFIG_ARCH_W90X900) := w90x900 -machine-$(CONFIG_ARCH_NUC93X) := nuc93x machine-$(CONFIG_FOOTBRIDGE) := footbridge machine-$(CONFIG_MACH_SPEAR300) := spear3xx machine-$(CONFIG_MACH_SPEAR310) := spear3xx diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a1edfd5a129..176062ac7f0 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -78,7 +78,16 @@ endif $(obj)/uImage: STARTADDR=$(LOADADDR) +check_for_multiple_loadaddr = \ +if [ $(words $(LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(LOADADDR)'; \ + echo 'This is incompatible with uImages'; \ + echo 'Specify LOADADDR on the commandline to build an uImage'; \ + false; \ +fi + $(obj)/uImage: $(obj)/zImage FORCE + @$(check_for_multiple_loadaddr) $(call if_changed,uimage) @echo ' Image $@ is ready' diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index e4f32a8e002..21f56ff3279 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -163,8 +163,16 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ ( echo "following symbols must have non local/private scope:" >&2; \ echo "$$bad_syms" >&2; rm -f $@; false ) +check_for_multiple_zreladdr = \ +if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ + echo 'multiple zreladdrs: $(ZRELADDR)'; \ + echo 'This needs CONFIG_AUTO_ZRELADDR to be set'; \ + false; \ +fi + $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE + @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 9f5ac11ccd8..c2effc91725 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -269,7 +269,8 @@ restart: adr r0, LC0 * of RAM and hope for the best. */ cmp r0, #1 - sub r0, r4, #(TEXT_OFFSET - 0x100) + sub r0, r4, #TEXT_OFFSET + add r0, r0, #0x100 mov r1, r6 sub r2, sp, r6 blne atags_to_fdt diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index 6fecc88065b..34ae3a64ba2 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -39,9 +39,12 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache"; + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; }; intc: interrupt-controller@80020000 { @@ -67,6 +70,11 @@ compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; }; mem-iobg { @@ -274,7 +282,7 @@ gpio: gpio-controller@b0120000 { #gpio-cells = <2>; #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio"; + compatible = "sirf,prima2-gpio-pinmux"; reg = <0xb0120000 0x10000>; gpio-controller; interrupt-controller; @@ -358,7 +366,7 @@ }; rtc-iobg { - compatible = "sirf,prima2-rtciobg", "simple-bus"; + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80030000 0x10000>; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index e5818668d09..0e225b86b65 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -66,5 +66,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 64cedca6fc7..a72299b8e66 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -25,4 +25,8 @@ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; + + sdhci@c8000600 { + support-8bit; + }; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts new file mode 100644 index 00000000000..9b29a623aaf --- /dev/null +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -0,0 +1,32 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Ventana evaluation board"; + compatible = "nvidia,ventana", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init"; + }; + + memory { + reg = < 0x00000000 0x40000000 >; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000400 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + }; + + sdhci@c8000600 { + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 5727595cde6..65d7e6a333e 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -77,6 +77,14 @@ gpio-controller; }; + pinmux: pinmux@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = < 0x70000014 0x10 /* Tri-state registers */ + 0x70000080 0x20 /* Mux registers */ + 0x700000a0 0x14 /* Pull-up/down registers */ + 0x70000868 0xa8 >; /* Pad control registers */ + }; + serial@70006000 { compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index bf0e134e520..0e6ae470c94 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -43,7 +43,7 @@ #include <asm/mach/irq.h> #include <asm/hardware/gic.h> -static DEFINE_SPINLOCK(irq_controller_lock); +static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ void __iomem *gic_cpu_base_addr __read_mostly; @@ -91,30 +91,30 @@ static void gic_mask_irq(struct irq_data *d) { u32 mask = 1 << (gic_irq(d) % 32); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); if (gic_arch_extn.irq_mask) gic_arch_extn.irq_mask(d); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } static void gic_unmask_irq(struct irq_data *d) { u32 mask = 1 << (gic_irq(d) % 32); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_unmask) gic_arch_extn.irq_unmask(d); writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } static void gic_eoi_irq(struct irq_data *d) { if (gic_arch_extn.irq_eoi) { - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); gic_arch_extn.irq_eoi(d); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); } writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); @@ -138,7 +138,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) return -EINVAL; - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_set_type) gic_arch_extn.irq_set_type(d, type); @@ -163,7 +163,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (enabled) writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); return 0; } @@ -191,10 +191,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, mask = 0xff << shift; bit = 1 << (cpu_logical_map(cpu) + shift); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); return IRQ_SET_MASK_OK; } @@ -224,9 +224,9 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); if (gic_irq == 1023) diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 97912fa4878..7129cfbdacd 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1546,7 +1546,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) /* Start the next */ case PL330_OP_START: - if (!_start(thrd)) + if (!_thrd_active(thrd) && !_start(thrd)) ret = -EIO; break; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 0569de6acfb..61691cdbdcf 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -718,6 +718,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) goto err_free; } + ret = clk_prepare(sachip->clk); + if (ret) + goto err_clkput; + spin_lock_init(&sachip->lock); sachip->dev = me; @@ -733,7 +737,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->base = ioremap(mem->start, PAGE_SIZE * 2); if (!sachip->base) { ret = -ENOMEM; - goto err_clkput; + goto err_clk_unprep; } /* @@ -809,6 +813,8 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) err_unmap: iounmap(sachip->base); + err_clk_unprep: + clk_unprepare(sachip->clk); err_clkput: clk_put(sachip->clk); err_free: @@ -835,6 +841,7 @@ static void __sa1111_remove(struct sa1111 *sachip) sa1111_writel(0, irqbase + SA1111_WAKEEN1); clk_disable(sachip->clk); + clk_unprepare(sachip->clk); if (sachip->irq != NO_IRQ) { irq_set_chained_handler(sachip->irq, NULL); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a07b0e763a8..1cde34a080d 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -12,11 +12,11 @@ */ #include <linux/device.h> +#include <linux/gpio.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <asm/gpio.h> #include <asm/hardware/scoop.h> /* PCMCIA to Scoop linkage diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 41df4787512..2393b5bc96f 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -41,9 +41,17 @@ static long __init sp804_get_clock_rate(const char *name) return PTR_ERR(clk); } + err = clk_prepare(clk); + if (err) { + pr_err("sp804: %s clock failed to prepare: %d\n", name, err); + clk_put(clk); + return err; + } + err = clk_enable(clk); if (err) { pr_err("sp804: %s clock failed to enable: %d\n", name, err); + clk_unprepare(clk); clk_put(clk); return err; } @@ -52,6 +60,7 @@ static long __init sp804_get_clock_rate(const char *name) if (rate < 0) { pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); clk_disable(clk); + clk_unprepare(clk); clk_put(clk); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 197f81c7735..01f18a421b1 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -346,7 +346,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { - u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + void __iomem *addr; + addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); cellid |= (readl(addr) & 0xff) << (8 * i); } vendor = (cellid >> 12) & 0xff; diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig new file mode 100644 index 00000000000..c5876d244f4 --- /dev/null +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -0,0 +1,214 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9G45=y +CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_DAVICOM_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_ATH_COMMON=m +CONFIG_ATH9K=m +CONFIG_CARL9170=m +CONFIG_B43=m +CONFIG_B43_PHY_N=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTL8192CU=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX_MENU=m +CONFIG_WL12XX=m +CONFIG_WL12XX_SDIO=m +CONFIG_ZD1211RW=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_FB_UDL=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ATMEL_USBA=m +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_EEM=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_CDC=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_SDIO_UART=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_ATMELMCI_DMA=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_DMADEVICES=y +CONFIG_AT_HDMAC=y +CONFIG_DMATEST=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index da53ff3b4d7..cd40bb56e56 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y CONFIG_MACH_NURI=y +CONFIG_MACH_ORIGEN=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 7196ade07e2..1103f62a196 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -1,5 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_TINY_RCU=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -8,20 +9,29 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y +CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CPU_ARM720T=y CONFIG_CPU_ARM920T=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_ARM1020=y +CONFIG_CPU_ARM1022=y +CONFIG_CPU_ARM1026=y CONFIG_PCI=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M" +CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -32,7 +42,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -40,6 +49,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -56,6 +66,8 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL030=y CONFIG_EXT2_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y @@ -68,4 +80,3 @@ CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 7c4b30b3495..cb0717fbb03 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -13,20 +12,21 @@ CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31LITE=y CONFIG_MACH_MX31_3DS=y CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_MX31LILLY=y CONFIG_MACH_QONG=y -CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_MX35_3DS=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y @@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" CONFIG_VFP=y -CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y @@ -52,7 +51,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -62,24 +60,27 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y # CONFIG_BLK_DEV is not set +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y CONFIG_DNET=y -CONFIG_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_IMX=y +# CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -89,12 +90,15 @@ CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_IMX2_WDT=y CONFIG_MFD_WM8350_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_WM8350=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_RC_CORE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_MT9M001=y CONFIG_SOC_CAMERA_MT9M111=y @@ -105,9 +109,26 @@ CONFIG_SOC_CAMERA_OV772X=y CONFIG_VIDEO_MX3=y # CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y -# CONFIG_USB_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_MXC_SOC_WM1133_EV1=y +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_GADGET=m +CONFIG_USB_FSL_USB2=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_MXC=y CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y @@ -119,6 +140,5 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 8845f1c9925..195729760ae 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -25,6 +25,7 @@ CONFIG_MACH_KAEN=y CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y CONFIG_MACH_WARIO=y +CONFIG_MACH_VENTANA=y CONFIG_TEGRA_DEBUG_UARTD=y CONFIG_ARM_ERRATA_742230=y CONFIG_NO_HZ=y @@ -38,7 +39,6 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_VFP=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -65,6 +65,7 @@ CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_WIRELESS is not set # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_MISC_DEVICES=y CONFIG_AD525X_DPOT=y @@ -72,34 +73,61 @@ CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_NET_ETHERNET=y CONFIG_R8169=y # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set +CONFIG_USB_PEGASUS=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_TEGRA=y +CONFIG_SPI=y +CONFIG_SPI_TEGRA=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_TPS6586X=y -# CONFIG_USB_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_WM8903=y +CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TEGRA=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_IIO=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_AK8975=y @@ -123,18 +151,15 @@ CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_SG=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 6550db3aa5c..960abceb8e1 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,3 +1,20 @@ include include/asm-generic/Kbuild.asm header-y += hwcap.h + +generic-y += auxvec.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += ioctl.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += local.h +generic-y += local64.h +generic-y += percpu.h +generic-y += poll.h +generic-y += resource.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += sizes.h diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h deleted file mode 100644 index c0536f6b29a..00000000000 --- a/arch/arm/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMARM_AUXVEC_H -#define __ASMARM_AUXVEC_H - -#endif diff --git a/arch/arm/include/asm/bitsperlong.h b/arch/arm/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b..00000000000 --- a/arch/arm/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bitsperlong.h> diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 4d88425a416..9abe7a07d5a 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -3,21 +3,58 @@ #ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -extern void __bug(const char *file, int line) __attribute__((noreturn)); - -/* give file/line information */ -#define BUG() __bug(__FILE__, __LINE__) +/* + * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling. + * We need to be careful not to conflict with those used by other modules and + * the register_undef_hook() system. + */ +#ifdef CONFIG_THUMB2_KERNEL +#define BUG_INSTR_VALUE 0xde02 +#define BUG_INSTR_TYPE ".hword " #else +#define BUG_INSTR_VALUE 0xe7f001f2 +#define BUG_INSTR_TYPE ".word " +#endif -/* this just causes an oops */ -#define BUG() do { *(int *)0 = 0; } while (1) -#endif +#define BUG() _BUG(__FILE__, __LINE__, BUG_INSTR_VALUE) +#define _BUG(file, line, value) __BUG(file, line, value) + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +/* + * The extra indirection is to ensure that the __FILE__ string comes through + * OK. Many version of gcc do not support the asm %c parameter which would be + * preferable to this unpleasantness. We use mergeable string sections to + * avoid multiple copies of the string appearing in the kernel image. + */ + +#define __BUG(__file, __line, __value) \ +do { \ + BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \ + asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \ + ".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \ + "2:\t.asciz " #__file "\n" \ + ".popsection\n" \ + ".pushsection __bug_table,\"a\"\n" \ + "3:\t.word 1b, 2b\n" \ + "\t.hword " #__line ", 0\n" \ + ".popsection"); \ + unreachable(); \ +} while (0) + +#else /* not CONFIG_DEBUG_BUGVERBOSE */ + +#define __BUG(__file, __line, __value) \ +do { \ + asm volatile(BUG_INSTR_TYPE #__value); \ + unreachable(); \ +} while (0) +#endif /* CONFIG_DEBUG_BUGVERBOSE */ #define HAVE_ARCH_BUG -#endif +#endif /* CONFIG_BUG */ #include <asm-generic/bug.h> diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index c023db09fcc..7ea78144ae2 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -7,6 +7,7 @@ #define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING) #define CACHEID_ASID_TAGGED (1 << 3) #define CACHEID_VIPT_I_ALIASING (1 << 4) +#define CACHEID_PIPT (1 << 5) extern unsigned int cacheid; @@ -16,6 +17,7 @@ extern unsigned int cacheid; #define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING) #define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED) #define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING) +#define icache_is_pipt() cacheid_is(CACHEID_PIPT) /* * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture @@ -26,7 +28,8 @@ extern unsigned int cacheid; #if __LINUX_ARM_ARCH__ >= 7 #define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\ CACHEID_ASID_TAGGED |\ - CACHEID_VIPT_I_ALIASING) + CACHEID_VIPT_I_ALIASING |\ + CACHEID_PIPT) #elif __LINUX_ARM_ARCH__ >= 6 #define __CACHEID_ARCH_MIN (~CACHEID_VIVT) #else diff --git a/arch/arm/include/asm/cputime.h b/arch/arm/include/asm/cputime.h deleted file mode 100644 index 3a8002a5fec..00000000000 --- a/arch/arm/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_CPUTIME_H -#define __ARM_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __ARM_CPUTIME_H */ diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index b5c9f5b1f6a..7aa368003b0 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -10,6 +10,9 @@ struct dev_archdata { #ifdef CONFIG_DMABOUNCE struct dmabounce_device_info *dmabounce; #endif +#ifdef CONFIG_IOMMU_API + void *iommu; /* private IOMMU data */ +#endif }; struct omap_device; diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7f27fab9d40..cb3b7c981c4 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -32,7 +32,7 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { - return (void *)__bus_to_virt(addr); + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 628670e9d7c..69a5b0b6455 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -34,18 +34,18 @@ #define DMA_MODE_CASCADE 0xc0 #define DMA_AUTOINIT 0x10 -extern spinlock_t dma_spin_lock; +extern raw_spinlock_t dma_spin_lock; static inline unsigned long claim_dma_lock(void) { unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); + raw_spin_lock_irqsave(&dma_spin_lock, flags); return flags; } static inline void release_dma_lock(unsigned long flags) { - spin_unlock_irqrestore(&dma_spin_lock, flags); + raw_spin_unlock_irqrestore(&dma_spin_lock, flags); } /* Clear the 'DMA Pointer Flip Flop'. diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h index 29f2610efc7..eaea14676d5 100644 --- a/arch/arm/include/asm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -161,7 +161,6 @@ struct expansion_card { /* Private internal data */ const char *card_desc; /* Card description */ - CONST unsigned int podaddr; /* Base Linux address for card */ CONST loader_t loader; /* loader program */ u64 dma_mask; }; diff --git a/arch/arm/include/asm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/arch/arm/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/arm/include/asm/errno.h b/arch/arm/include/asm/errno.h deleted file mode 100644 index 6e60f0612bb..00000000000 --- a/arch/arm/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_ERRNO_H -#define _ARM_ERRNO_H - -#include <asm-generic/errno.h> - -#endif diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 166a7a3e284..11ad0bfbb0a 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -4,4 +4,23 @@ /* not all ARM platforms necessarily support this API ... */ #include <mach/gpio.h> +#ifndef __ARM_GPIOLIB_COMPLEX +/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ +#include <asm-generic/gpio.h> + +/* The trivial gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#endif + +/* + * Provide a default gpio_to_irq() which should satisfy every case. + * However, some platforms want to do this differently, so allow them + * to override it. + */ +#ifndef gpio_to_irq +#define gpio_to_irq __gpio_to_irq +#endif + #endif /* _ARCH_ARM_GPIO_H */ diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 99a6ed7e1bf..434edccdf7f 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -52,6 +52,8 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -65,8 +67,23 @@ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) +#define L2X0_CACHE_ID_RTL_MASK 0x3f +#define L2X0_CACHE_ID_RTL_R0P0 0x0 +#define L2X0_CACHE_ID_RTL_R1P0 0x2 +#define L2X0_CACHE_ID_RTL_R2P0 0x4 +#define L2X0_CACHE_ID_RTL_R3P0 0x5 +#define L2X0_CACHE_ID_RTL_R3P1 0x6 +#define L2X0_CACHE_ID_RTL_R3P2 0x8 #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 #define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) @@ -77,8 +94,33 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); + +struct l2x0_regs { + unsigned long phy_base; + unsigned long aux_ctrl; + /* + * Whether the following registers need to be saved/restored + * depends on platform + */ + unsigned long tag_latency; + unsigned long data_latency; + unsigned long filter_start; + unsigned long filter_end; + unsigned long prefetch_ctrl; + unsigned long pwr_ctrl; +}; + +extern struct l2x0_regs l2x0_saved_regs; + #endif #endif diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index b69d972b1f7..9eda7dc92ad 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + #define IOP3XX_N_GPIOS 8 static inline int gpio_get_value(unsigned gpio) diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b3fea38d55c..43cab498bc2 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,7 +9,7 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; +extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) #define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index d66605dea55..065d100fa63 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -80,6 +80,7 @@ extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int, extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int); +extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached); extern void __iounmap(volatile void __iomem *addr); /* @@ -110,6 +111,27 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #include <mach/io.h> /* + * This is the limit of PC card/PCI/ISA IO space, which is by default + * 64K if we have PC card, PCI or ISA support. Otherwise, default to + * zero to prevent ISA/PCI drivers claiming IO space (and potentially + * oopsing.) + * + * Only set this larger if you really need inb() et.al. to operate over + * a larger address space. Note that SOC_COMMON ioremaps each sockets + * IO space area, and so inb() et.al. must be defined to operate as per + * readb() et.al. on such platforms. + */ +#ifndef IO_SPACE_LIMIT +#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE) +#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff) +#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD) +#define IO_SPACE_LIMIT ((resource_size_t)0xffff) +#else +#define IO_SPACE_LIMIT ((resource_size_t)0) +#endif +#endif + +/* * IO port access primitives * ------------------------- * @@ -189,11 +211,11 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * IO port primitives for more information. */ #ifdef __mem_pci -#define readb_relaxed(c) ({ u8 __v = __raw_readb(__mem_pci(c)); __v; }) -#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__mem_pci(c))); __v; }) -#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__mem_pci(c))); __v; }) +#define readb_relaxed(c) ({ u8 __r = __raw_readb(__mem_pci(c)); __r; }) +#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \ + __raw_readw(__mem_pci(c))); __r; }) +#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \ + __raw_readl(__mem_pci(c))); __r; }) #define writeb_relaxed(v,c) ((void)__raw_writeb(v,__mem_pci(c))) #define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \ @@ -238,7 +260,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #ifndef __arch_ioremap @@ -260,10 +282,16 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; }) #define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; }) +#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + #define iowrite8(v,p) ({ __iowmb(); (void)__raw_writeb(v, p); }) #define iowrite16(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); }) #define iowrite32(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); }) +#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); }) + #define ioread8_rep(p,d,c) __raw_readsb(p,d,c) #define ioread16_rep(p,d,c) __raw_readsw(p,d,c) #define ioread32_rep(p,d,c) __raw_readsl(p,d,c) diff --git a/arch/arm/include/asm/ioctl.h b/arch/arm/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/arch/arm/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/arm/include/asm/irq_regs.h b/arch/arm/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/arm/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/arm/include/asm/kdebug.h b/arch/arm/include/asm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/arch/arm/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/arm/include/asm/local.h b/arch/arm/include/asm/local.h deleted file mode 100644 index c11c530f74d..00000000000 --- a/arch/arm/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local.h> diff --git a/arch/arm/include/asm/local64.h b/arch/arm/include/asm/local64.h deleted file mode 100644 index 36c93b5cc23..00000000000 --- a/arch/arm/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 727da118bcc..7d19425dd49 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -34,8 +34,7 @@ struct machine_desc { unsigned int reserve_lp1 :1; /* never has lp1 */ unsigned int reserve_lp2 :1; /* never has lp2 */ unsigned int soft_reboot :1; /* soft reboot */ - void (*fixup)(struct machine_desc *, - struct tag *, char **, + void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index b4ffe9d5b52..14965658a92 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -6,7 +6,7 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID unsigned int id; - spinlock_t id_lock; + raw_spinlock_t id_lock; #endif unsigned int kvm_seq; } mm_context_t; @@ -16,7 +16,7 @@ typedef struct { /* init_mm.context.id_lock should be initialized. */ #define INIT_MM_CONTEXT(name) \ - .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), + .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index d8387437ec5..53426c66352 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -34,6 +34,7 @@ struct outer_cache_fns { void (*sync)(void); #endif void (*set_debug)(unsigned long); + void (*resume)(void); }; #ifdef CONFIG_OUTER_CACHE @@ -74,6 +75,12 @@ static inline void outer_disable(void) outer_cache.disable(); } +static inline void outer_resume(void) +{ + if (outer_cache.resume) + outer_cache.resume(); +} + #else static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ac75d084888..ca94653f1ec 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,47 +151,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); -typedef unsigned long pteval_t; - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { pteval_t pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef pteval_t pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ +#include <asm/pgtable-2level-types.h> #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h deleted file mode 100644 index b4e32d8ec07..00000000000 --- a/arch/arm/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_PERCPU -#define __ARM_PERCPU - -#include <asm-generic/percpu.h> - -#endif diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 22de005f159..3e08fd3fbb6 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -105,9 +105,9 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) } static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, - unsigned long prot) + pmdval_t prot) { - unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot; + pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot; pmdp[0] = __pmd(pmdval); pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h new file mode 100644 index 00000000000..5cfba15cb40 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -0,0 +1,93 @@ +/* + * arch/arm/include/asm/pgtable-2level-hwdef.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H +#define _ASM_PGTABLE_2LEVEL_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1 descriptor (PMD) + * - common + */ +#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) +#define PMD_TYPE_TABLE (_AT(pmdval_t, 1) << 0) +#define PMD_TYPE_SECT (_AT(pmdval_t, 2) << 0) +#define PMD_BIT4 (_AT(pmdval_t, 1) << 4) +#define PMD_DOMAIN(x) (_AT(pmdval_t, (x)) << 5) +#define PMD_PROTECTION (_AT(pmdval_t, 1) << 9) /* v5 */ +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_XN (_AT(pmdval_t, 1) << 4) /* v6 */ +#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 1) << 10) +#define PMD_SECT_AP_READ (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_TEX(x) (_AT(pmdval_t, (x)) << 12) /* v5 */ +#define PMD_SECT_APX (_AT(pmdval_t, 1) << 15) /* v6 */ +#define PMD_SECT_S (_AT(pmdval_t, 1) << 16) /* v6 */ +#define PMD_SECT_nG (_AT(pmdval_t, 1) << 17) /* v6 */ +#define PMD_SECT_SUPER (_AT(pmdval_t, 1) << 18) /* v6 */ +#define PMD_SECT_AF (_AT(pmdval_t, 0)) + +#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0)) +#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) +#define PMD_SECT_WT (PMD_SECT_CACHEABLE) +#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) +#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) + +/* + * - coarse table (not used) + */ + +/* + * + Level 2 descriptor (PTE) + * - common + */ +#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) +#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) +#define PTE_TYPE_LARGE (_AT(pteval_t, 1) << 0) +#define PTE_TYPE_SMALL (_AT(pteval_t, 2) << 0) +#define PTE_TYPE_EXT (_AT(pteval_t, 3) << 0) /* v5 */ +#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) +#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) + +/* + * - extended small page/tiny page + */ +#define PTE_EXT_XN (_AT(pteval_t, 1) << 0) /* v6 */ +#define PTE_EXT_AP_MASK (_AT(pteval_t, 3) << 4) +#define PTE_EXT_AP0 (_AT(pteval_t, 1) << 4) +#define PTE_EXT_AP1 (_AT(pteval_t, 2) << 4) +#define PTE_EXT_AP_UNO_SRO (_AT(pteval_t, 0) << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) +#define PTE_EXT_TEX(x) (_AT(pteval_t, (x)) << 6) /* v5 */ +#define PTE_EXT_APX (_AT(pteval_t, 1) << 9) /* v6 */ +#define PTE_EXT_COHERENT (_AT(pteval_t, 1) << 9) /* XScale3 */ +#define PTE_EXT_SHARED (_AT(pteval_t, 1) << 10) /* v6 */ +#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* v6 */ + +/* + * - small page + */ +#define PTE_SMALL_AP_MASK (_AT(pteval_t, 0xff) << 4) +#define PTE_SMALL_AP_UNO_SRO (_AT(pteval_t, 0x00) << 4) +#define PTE_SMALL_AP_UNO_SRW (_AT(pteval_t, 0x55) << 4) +#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4) +#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4) + +#define PHYS_MASK (~0UL) + +#endif diff --git a/arch/arm/include/asm/pgtable-2level-types.h b/arch/arm/include/asm/pgtable-2level-types.h new file mode 100644 index 00000000000..66cb5b0e89c --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-types.h @@ -0,0 +1,67 @@ +/* + * arch/arm/include/asm/pgtable-2level-types.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H +#define _ASM_PGTABLE_2LEVEL_TYPES_H + +#include <asm/types.h> + +typedef u32 pteval_t; +typedef u32 pmdval_t; + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { pteval_t pte; } pte_t; +typedef struct { pmdval_t pmd; } pmd_t; +typedef struct { pmdval_t pgd[2]; } pgd_t; +typedef struct { pteval_t pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef pteval_t pte_t; +typedef pmdval_t pmd_t; +typedef pmdval_t pgd_t[2]; +typedef pteval_t pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* _ASM_PGTABLE_2LEVEL_TYPES_H */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h new file mode 100644 index 00000000000..470457e1cfc --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level.h @@ -0,0 +1,143 @@ +/* + * arch/arm/include/asm/pgtable-2level.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_H +#define _ASM_PGTABLE_2LEVEL_H + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, preceded by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ + * | | +------------+ +0 + * +- - - - + | Linux pt 0 | + * | | +------------+ +1024 + * +--------+ +0 | Linux pt 1 | + * | |-----> +------------+ +2048 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +3072 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) +#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) +#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) +#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) +#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) +#define L_PTE_USER (_AT(pteval_t, 1) << 8) +#define L_PTE_XN (_AT(pteval_t, 1) << 9) +#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ + +/* + * These are the memory types, defined to be compatible with + * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB + */ +#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ +#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ +#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ +#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ +#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ +#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ +#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ +#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ +#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ +#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ +#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) + +#endif /* _ASM_PGTABLE_2LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index fd1521d5cb9..183111164ce 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -10,81 +10,6 @@ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) +#include <asm/pgtable-2level-hwdef.h> #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f1956b27ae5..9451dce3a55 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -24,6 +24,8 @@ #include <mach/vmalloc.h> #include <asm/pgtable-hwdef.h> +#include <asm/pgtable-2level.h> + /* * Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the @@ -41,79 +43,6 @@ #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #endif -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, preceded by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ - * | | +------------+ +0 - * +- - - - + | Linux pt 0 | - * | | +------------+ +1024 - * +--------+ +0 | Linux pt 1 | - * | |-----> +------------+ +2048 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +3072 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) -#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) -#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - #define LIBRARY_TEXT_START 0x0c000000 #ifndef __ASSEMBLY__ @@ -124,12 +53,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte) #define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd) #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * This is the lowest virtual address we can permit any user space @@ -138,60 +61,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); */ #define FIRST_USER_ADDRESS PAGE_SIZE -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) -#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) -#define L_PTE_USER (_AT(pteval_t, 1) << 8) -#define L_PTE_XN (_AT(pteval_t, 1) << 9) -#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ - -/* - * These are the memory types, defined to be compatible with - * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB - */ -#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ -#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ -#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ -#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ -#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ -#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ -#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ -#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ -#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ -#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ -#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) - -#ifndef __ASSEMBLY__ - /* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, @@ -330,10 +199,10 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; static inline pte_t *pmd_page_vaddr(pmd_t pmd) { - return __va(pmd_val(pmd) & PAGE_MASK); + return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK); } -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) /* we don't need complex calculations here as the pmd is folded into the pgd */ #define pmd_addr_end(addr,end) (end) @@ -354,7 +223,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr)) #define pte_unmap(pte) __pte_unmap(pte) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) #define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) diff --git a/arch/arm/include/asm/poll.h b/arch/arm/include/asm/poll.h deleted file mode 100644 index c98509d3149..00000000000 --- a/arch/arm/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/poll.h> diff --git a/arch/arm/include/asm/resource.h b/arch/arm/include/asm/resource.h deleted file mode 100644 index 734b581b5b6..00000000000 --- a/arch/arm/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_RESOURCE_H -#define _ARM_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h deleted file mode 100644 index 2b8c5160388..00000000000 --- a/arch/arm/include/asm/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sections.h> diff --git a/arch/arm/include/asm/siginfo.h b/arch/arm/include/asm/siginfo.h deleted file mode 100644 index 5e21852e603..00000000000 --- a/arch/arm/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_SIGINFO_H -#define _ASMARM_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h deleted file mode 100644 index 154b89b81d3..00000000000 --- a/arch/arm/include/asm/sizes.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ -#include <asm-generic/sizes.h> - -#define SZ_48M (SZ_32M + SZ_16M) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ed6b0499a10..984014b9264 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -57,6 +57,7 @@ #ifndef __ASSEMBLY__ +#include <linux/compiler.h> #include <linux/linkage.h> #include <linux/irqflags.h> @@ -90,14 +91,13 @@ void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) -extern asmlinkage void __backtrace(void); extern asmlinkage void c_backtrace(unsigned long fp, int pmode); struct mm_struct; extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); -extern int cpu_architecture(void); +extern int __pure cpu_architecture(void); extern void cpu_init(void); void arm_machine_restart(char mode, const char *cmd); diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 8077145698f..02b2f820398 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -471,7 +471,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) * these operations. This is typically used when we are removing * PMD entries. */ -static inline void flush_pmd_entry(pmd_t *pmd) +static inline void flush_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -487,7 +487,7 @@ static inline void flush_pmd_entry(pmd_t *pmd) dsb(); } -static inline void clean_pmd_entry(pmd_t *pmd) +static inline void clean_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7cac26c5f50..16eed6aebfa 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM_SLEEP) += sleep.o suspend.o +obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index aeef960ff79..8e3c6f11b0a 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -49,9 +49,6 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); - -EXPORT_SYMBOL(__backtrace); - /* platform dependent support */ EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__const_udelay); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 16baba2e436..1429d8989fb 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -20,6 +20,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> /* @@ -92,6 +93,17 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); +#ifdef CONFIG_CACHE_L2X0 + DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); + DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); + DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency)); + DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency)); + DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start)); + DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end)); + DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl)); + DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl)); + BLANK(); +#endif #ifdef CONFIG_CPU_HAS_ASID DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); BLANK(); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index d6df359408f..c0d9203fc75 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -412,6 +412,9 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +#endif /* * Convert from Linux-centric to bus-centric addresses for bridge devices. @@ -431,6 +434,7 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->start = res->start - offset; region->end = res->end - offset; } +EXPORT_SYMBOL(pcibios_resource_to_bus); void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, @@ -447,12 +451,7 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->start = region->start + offset; res->end = region->end + offset; } - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_fixup_bus); -EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif /* * Swizzle the device pin each time we cross a bridge. diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index b7685f1bb04..204e2160cfc 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -151,6 +151,8 @@ printhex: adr r2, hexbuf b printascii ENDPROC(printhex2) +hexbuf: .space 16 + .ltorg ENTRY(printascii) @@ -175,5 +177,3 @@ ENTRY(printch) mov r0, #0 b 1b ENDPROC(printch) - -hexbuf: .space 16 diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 2c4a185f92c..7b829d9663b 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -23,7 +23,7 @@ #include <asm/mach/dma.h> -DEFINE_SPINLOCK(dma_spin_lock); +DEFINE_RAW_SPINLOCK(dma_spin_lock); EXPORT_SYMBOL(dma_spin_lock); static dma_t *dma_chan[MAX_DMA_CHANNELS]; diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index d16500110ee..4dd0edab6a6 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -237,7 +237,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); - src_pgd = pgd_offset(mm, EASI_BASE); + src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE); dst_pgd = pgd_offset(mm, EASI_START); memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); @@ -674,44 +674,37 @@ static int __init ecard_probeirqhw(void) #define ecard_probeirqhw() (0) #endif -#ifndef IO_EC_MEMC8_BASE -#define IO_EC_MEMC8_BASE 0 -#endif - -static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) +static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) { - unsigned long address = 0; + void __iomem *address = NULL; int slot = ec->slot_no; if (ec->slot_no == 8) - return IO_EC_MEMC8_BASE; + return ECARD_MEMC8_BASE; ectcr &= ~(1 << slot); switch (type) { case ECARD_MEMC: if (slot < 4) - address = IO_EC_MEMC_BASE + (slot << 12); + address = ECARD_MEMC_BASE + (slot << 14); break; case ECARD_IOC: if (slot < 4) - address = IO_EC_IOC_BASE + (slot << 12); -#ifdef IO_EC_IOC4_BASE + address = ECARD_IOC_BASE + (slot << 14); else - address = IO_EC_IOC4_BASE + ((slot - 4) << 12); -#endif + address = ECARD_IOC4_BASE + ((slot - 4) << 14); if (address) - address += speed << 17; + address += speed << 19; break; -#ifdef IO_EC_EASI_BASE case ECARD_EASI: - address = IO_EC_EASI_BASE + (slot << 22); + address = ECARD_EASI_BASE + (slot << 24); if (speed == ECARD_FAST) ectcr |= 1 << slot; break; -#endif + default: break; } @@ -990,6 +983,7 @@ ecard_probe(int slot, card_type_t type) ecard_t **ecp; ecard_t *ec; struct ex_ecid cid; + void __iomem *addr; int i, rc; ec = ecard_alloc_card(type, slot); @@ -999,7 +993,7 @@ ecard_probe(int slot, card_type_t type) } rc = -ENODEV; - if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0) + if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL) goto nodev; cid.r_zero = 1; @@ -1019,7 +1013,7 @@ ecard_probe(int slot, card_type_t type) ec->cid.fiqmask = cid.r_fiqmask; ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); ec->fiqaddr = - ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr); + ec->irqaddr = addr; if (ec->cid.is) { ec->irqmask = ec->cid.irqmask; @@ -1048,10 +1042,8 @@ ecard_probe(int slot, card_type_t type) set_irq_flags(ec->irq, IRQF_VALID); } -#ifdef IO_EC_MEMC8_BASE if (slot == 8) ec->irq = 11; -#endif #ifdef CONFIG_ARCH_RPC /* On RiscPC, only first two slots have DMA capability */ if (slot < 2) @@ -1097,9 +1089,7 @@ static int __init ecard_init(void) ecard_probe(slot, ECARD_IOC); } -#ifdef IO_EC_MEMC8_BASE ecard_probe(8, ECARD_IOC); -#endif irqhw = ecard_probeirqhw(); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a87cbf889ff..9ad50c4208a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -24,6 +24,7 @@ #include <asm/unwind.h> #include <asm/unistd.h> #include <asm/tls.h> +#include <asm/system.h> #include "entry-header.S" #include <asm/entry-macro-multi.S> @@ -262,8 +263,7 @@ __und_svc: ldr r0, [r4, #-4] #else ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 - and r9, r0, #0xf800 - cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 + cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 ldrhhs r9, [r4] @ bottom 16 bits orrhs r0, r9, r0, lsl #16 #endif @@ -440,18 +440,46 @@ __und_usr: #endif beq call_fpe @ Thumb instruction -#if __LINUX_ARM_ARCH__ >= 7 +#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7 +/* + * Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms + * can never be supported in a single kernel, this code is not applicable at + * all when __LINUX_ARM_ARCH__ < 6. This allows simplifying assumptions to be + * made about .arch directives. + */ +#if __LINUX_ARM_ARCH__ < 7 +/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */ +#define NEED_CPU_ARCHITECTURE + ldr r5, .LCcpu_architecture + ldr r5, [r5] + cmp r5, #CPU_ARCH_ARMv7 + blo __und_usr_unknown +/* + * The following code won't get run unless the running CPU really is v7, so + * coding round the lack of ldrht on older arches is pointless. Temporarily + * override the assembler target arch with the minimum required instead: + */ + .arch armv6t2 +#endif 2: ARM( ldrht r5, [r4], #2 ) THUMB( ldrht r5, [r4] ) THUMB( add r4, r4, #2 ) - and r0, r5, #0xf800 @ mask bits 111x x... .... .... - cmp r0, #0xe800 @ 32bit instruction if xx != 0 + cmp r5, #0xe800 @ 32bit instruction if xx != 0 blo __und_usr_unknown 3: ldrht r0, [r4] add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 orr r0, r0, r5, lsl #16 + +#if __LINUX_ARM_ARCH__ < 7 +/* If the target arch was overridden, change it back: */ +#ifdef CONFIG_CPU_32v6K + .arch armv6k #else + .arch armv6 +#endif +#endif /* __LINUX_ARM_ARCH__ < 7 */ +#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */ b __und_usr_unknown #endif UNWIND(.fnend ) @@ -578,6 +606,12 @@ call_fpe: movw_pc lr @ CP#14 (Debug) movw_pc lr @ CP#15 (Control) +#ifdef NEED_CPU_ARCHITECTURE + .align 2 +.LCcpu_architecture: + .word __cpu_architecture +#endif + #ifdef CONFIG_NEON .align 6 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 673c806cc10..566c54c2a1f 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -21,6 +21,7 @@ #include <asm/memory.h> #include <asm/thread_info.h> #include <asm/system.h> +#include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL #include <mach/debug-macro.S> @@ -38,11 +39,14 @@ #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif +#define PG_DIR_SIZE 0x4000 +#define PMD_ORDER 2 + .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE .macro pgtbl, rd, phys - add \rd, \phys, #TEXT_OFFSET - 0x4000 + add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm #ifdef CONFIG_XIP_KERNEL @@ -148,11 +152,11 @@ __create_page_tables: pgtbl r4, r8 @ page table address /* - * Clear the 16K level 1 swapper page table + * Clear the swapper page table */ mov r0, r4 mov r3, #0 - add r6, r0, #0x4000 + add r6, r0, #PG_DIR_SIZE 1: str r3, [r0], #4 str r3, [r0], #4 str r3, [r0], #4 @@ -171,30 +175,30 @@ __create_page_tables: sub r0, r0, r3 @ virt->phys offset add r5, r5, r0 @ phys __enable_mmu add r6, r6, r0 @ phys __enable_mmu_end - mov r5, r5, lsr #20 - mov r6, r6, lsr #20 + mov r5, r5, lsr #SECTION_SHIFT + mov r6, r6, lsr #SECTION_SHIFT -1: orr r3, r7, r5, lsl #20 @ flags + kernel base - str r3, [r4, r5, lsl #2] @ identity mapping - teq r5, r6 - addne r5, r5, #1 @ next section - bne 1b +1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base + str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping + cmp r5, r6 + addlo r5, r5, #1 @ next section + blo 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ mov r3, pc - mov r3, r3, lsr #20 - orr r3, r7, r3, lsl #20 - add r0, r4, #(KERNEL_START & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! ldr r6, =(KERNEL_END - 1) - add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r0, r0, #1 << PMD_ORDER + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #ifdef CONFIG_XIP_KERNEL @@ -203,11 +207,11 @@ __create_page_tables: */ add r3, r8, #TEXT_OFFSET orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! + add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! ldr r6, =(_end - 1) add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 add r3, r3, #1 << 20 strls r3, [r0], #4 @@ -218,12 +222,12 @@ __create_page_tables: * Then map boot params address in r2 or * the first 1MB of ram if boot params address is not specified. */ - mov r0, r2, lsr #20 - movs r0, r0, lsl #20 + mov r0, r2, lsr #SECTION_SHIFT + movs r0, r0, lsl #SECTION_SHIFT moveq r0, r8 sub r3, r0, r8 add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #18 + add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orr r6, r7, r0 str r6, [r3] @@ -236,21 +240,21 @@ __create_page_tables: */ addruart r7, r3, r0 - mov r3, r3, lsr #20 - mov r3, r3, lsl #2 + mov r3, r3, lsr #SECTION_SHIFT + mov r3, r3, lsl #PMD_ORDER add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - mov r3, r7, lsr #20 + mov r3, r7, lsr #SECTION_SHIFT ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags - orr r3, r7, r3, lsl #20 + orr r3, r7, r3, lsl #SECTION_SHIFT 1: str r3, [r0], #4 - add r3, r3, #1 << 20 - teq r0, r6 - bne 1b + add r3, r3, #1 << SECTION_SHIFT + cmp r0, r6 + blo 1b #else /* CONFIG_DEBUG_ICEDCC */ /* we don't need any serial debugging mappings for ICEDCC */ @@ -262,7 +266,7 @@ __create_page_tables: * If we're using the NetWinder or CATS, we also need to map * in the 16550-type serial port for the debug messages */ - add r0, r4, #0xff000000 >> 18 + add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x7c000000 str r3, [r0] #endif @@ -272,10 +276,10 @@ __create_page_tables: * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x02000000 >> 18 + add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0xd8000000 >> 18 + add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) str r3, [r0] #endif #endif diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e59bbd496c3..c1b4463dcc8 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -32,6 +32,24 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { + unsigned long page_list; + void *reboot_code_buffer; + page_list = image->head & PAGE_MASK; + + reboot_code_buffer = page_address(image->control_code_page); + + /* Prepare parameters for reboot_code_buffer*/ + kexec_start_address = image->start; + kexec_indirection_page = page_list; + kexec_mach_type = machine_arch_type; + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + + /* copy our kernel relocation code to the control code page */ + memcpy(reboot_code_buffer, + relocate_new_kernel, relocate_new_kernel_size); + + flush_icache_range((unsigned long) reboot_code_buffer, + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); return 0; } @@ -82,31 +100,14 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { - unsigned long page_list; unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; - - page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ reboot_code_buffer_phys = page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); - /* Prepare parameters for reboot_code_buffer*/ - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; - - /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); - - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index cc2020c2c70..1e9be5d25e5 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -33,7 +33,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK) +#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 1a347f481e5..fd0814076ff 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -319,7 +319,7 @@ void show_regs(struct pt_regs * regs) printk("\n"); printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm); __show_regs(regs); - __backtrace(); + dump_stack(); } ATOMIC_NOTIFIER_HEAD(thread_notify_head); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6136144f8f8..bda0a218f4a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -29,6 +29,8 @@ #include <linux/fs.h> #include <linux/proc_fs.h> #include <linux/memblock.h> +#include <linux/bug.h> +#include <linux/compiler.h> #include <asm/unified.h> #include <asm/cpu.h> @@ -42,6 +44,7 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/system.h> #include <asm/prom.h> #include <asm/mach/arch.h> @@ -115,6 +118,13 @@ struct outer_cache_fns outer_cache __read_mostly; EXPORT_SYMBOL(outer_cache); #endif +/* + * Cached cpu_architecture() result for use by assembler code. + * C code should use the cpu_architecture() function instead of accessing this + * variable directly. + */ +int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN; + struct stack { u32 irq[3]; u32 abt[3]; @@ -210,7 +220,7 @@ static const char *proc_arch[] = { "?(17)", }; -int cpu_architecture(void) +static int __get_cpu_architecture(void) { int cpu_arch; @@ -243,11 +253,22 @@ int cpu_architecture(void) return cpu_arch; } +int __pure cpu_architecture(void) +{ + BUG_ON(__cpu_architecture == CPU_ARCH_UNKNOWN); + + return __cpu_architecture; +} + static int cpu_has_aliasing_icache(unsigned int arch) { int aliasing_icache; unsigned int id_reg, num_sets, line_size; + /* PIPT caches never alias. */ + if (icache_is_pipt()) + return 0; + /* arch specifies the register format */ switch (arch) { case CPU_ARCH_ARMv7: @@ -282,8 +303,14 @@ static void __init cacheid_init(void) /* ARMv7 register format */ arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; - if ((cachetype & (3 << 14)) == 1 << 14) + switch (cachetype & (3 << 14)) { + case (1 << 14): cacheid |= CACHEID_ASID_TAGGED; + break; + case (3 << 14): + cacheid |= CACHEID_PIPT; + break; + } } else { arch = CPU_ARCH_ARMv6; if (cachetype & (1 << 23)) @@ -300,10 +327,11 @@ static void __init cacheid_init(void) printk("CPU: %s data cache, %s instruction cache\n", cache_is_vivt() ? "VIVT" : cache_is_vipt_aliasing() ? "VIPT aliasing" : - cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown", + cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown", cache_is_vivt() ? "VIVT" : icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" : icache_is_vipt_aliasing() ? "VIPT aliasing" : + icache_is_pipt() ? "PIPT" : cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown"); } @@ -414,6 +442,7 @@ static void __init setup_processor(void) } cpu_name = list->cpu_name; + __cpu_architecture = __get_cpu_architecture(); #ifdef MULTI_CPU processor = *list->proc; @@ -844,7 +873,7 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) } if (mdesc->fixup) - mdesc->fixup(mdesc, tags, &from, &meminfo); + mdesc->fixup(tags, &from, &meminfo); if (tags->hdr.tag == ATAG_CORE) { if (meminfo.nr_banks != 0) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index a96c08cd612..ef5640b9e21 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -319,17 +319,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) */ platform_secondary_init(cpu); - /* - * Enable local interrupts. - */ notify_cpu_starting(cpu); - local_irq_enable(); - local_fiq_enable(); - - /* - * Setup the percpu timer for this CPU. - */ - percpu_timer_setup(); calibrate_delay(); @@ -341,10 +331,23 @@ asmlinkage void __cpuinit secondary_start_kernel(void) * before we continue. */ set_cpu_online(cpu, true); + + /* + * Setup the percpu timer for this CPU. + */ + percpu_timer_setup(); + while (!cpu_active(cpu)) cpu_relax(); /* + * cpu_active bit is set, so it's safe to enalbe interrupts + * now. + */ + local_irq_enable(); + local_fiq_enable(); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -527,7 +530,7 @@ static void percpu_timer_stop(void) } #endif -static DEFINE_SPINLOCK(stop_lock); +static DEFINE_RAW_SPINLOCK(stop_lock); /* * ipi_cpu_stop - handle IPI from smp_send_stop() @@ -536,10 +539,10 @@ static void ipi_cpu_stop(unsigned int cpu) { if (system_state == SYSTEM_BOOTING || system_state == SYSTEM_RUNNING) { - spin_lock(&stop_lock); + raw_spin_lock(&stop_lock); printk(KERN_CRIT "CPU%u: stopping\n", cpu); dump_stack(); - spin_unlock(&stop_lock); + raw_spin_unlock(&stop_lock); } set_cpu_online(cpu, false); diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index cb634c3e28e..5a54b95d6bd 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -39,13 +39,11 @@ */ static struct sys_timer *system_timer; -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ + defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); - -#ifdef CONFIG_RTC_DRV_CMOS_MODULE EXPORT_SYMBOL(rtc_lock); -#endif #endif /* pc-style 'CMOS' RTC support */ /* change this if you have some constant time drift */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 210382555af..99a57270250 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -21,6 +21,7 @@ #include <linux/kdebug.h> #include <linux/module.h> #include <linux/kexec.h> +#include <linux/bug.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/sched.h> @@ -256,7 +257,7 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt return ret; } -static DEFINE_SPINLOCK(die_lock); +static DEFINE_RAW_SPINLOCK(die_lock); /* * This function is protected against re-entrancy. @@ -268,9 +269,11 @@ void die(const char *str, struct pt_regs *regs, int err) oops_enter(); - spin_lock_irq(&die_lock); + raw_spin_lock_irq(&die_lock); console_verbose(); bust_spinlocks(1); + if (!user_mode(regs)) + report_bug(regs->ARM_pc, regs); ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) @@ -278,7 +281,7 @@ void die(const char *str, struct pt_regs *regs, int err) bust_spinlocks(0); add_taint(TAINT_DIE); - spin_unlock_irq(&die_lock); + raw_spin_unlock_irq(&die_lock); oops_exit(); if (in_interrupt()) @@ -302,25 +305,43 @@ void arm_notify_die(const char *str, struct pt_regs *regs, } } +#ifdef CONFIG_GENERIC_BUG + +int is_valid_bugaddr(unsigned long pc) +{ +#ifdef CONFIG_THUMB2_KERNEL + unsigned short bkpt; +#else + unsigned long bkpt; +#endif + + if (probe_kernel_address((unsigned *)pc, bkpt)) + return 0; + + return bkpt == BUG_INSTR_VALUE; +} + +#endif + static LIST_HEAD(undef_hook); -static DEFINE_SPINLOCK(undef_lock); +static DEFINE_RAW_SPINLOCK(undef_lock); void register_undef_hook(struct undef_hook *hook) { unsigned long flags; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_add(&hook->node, &undef_hook); - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); } void unregister_undef_hook(struct undef_hook *hook) { unsigned long flags; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_del(&hook->node); - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); } static int call_undef_hook(struct pt_regs *regs, unsigned int instr) @@ -329,12 +350,12 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr) unsigned long flags; int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL; - spin_lock_irqsave(&undef_lock, flags); + raw_spin_lock_irqsave(&undef_lock, flags); list_for_each_entry(hook, &undef_hook, node) if ((instr & hook->instr_mask) == hook->instr_val && (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) fn = hook->fn; - spin_unlock_irqrestore(&undef_lock, flags); + raw_spin_unlock_irqrestore(&undef_lock, flags); return fn ? fn(regs, instr) : 1; } @@ -707,16 +728,6 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) arm_notify_die("unknown data abort code", regs, &info, instr, 0); } -void __attribute__((noreturn)) __bug(const char *file, int line) -{ - printk(KERN_CRIT"kernel BUG at %s:%d!\n", file, line); - *(int *)0 = 0; - - /* Avoid "noreturn function does return" */ - for (;;); -} -EXPORT_SYMBOL(__bug); - void __readwrite_bug(const char *fn) { printk("%s called, but not implemented\n", fn); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4e66f62b8d4..20b3041e086 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,7 +21,8 @@ #define ARM_CPU_KEEP(x) #endif -#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ + defined(CONFIG_GENERIC_BUG) #define ARM_EXIT_KEEP(x) x #define ARM_EXIT_DISCARD(x) #else diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index a673297b0cf..cd07b5814c2 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -22,15 +22,10 @@ #define mask r7 #define offset r8 -ENTRY(__backtrace) - mov r1, #0x10 - mov r0, fp - ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) mov pc, lr -ENDPROC(__backtrace) ENDPROC(c_backtrace) #else stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location... @@ -107,7 +102,6 @@ for_each_frame: tst frame, mask @ Check for address exceptions mov r1, frame bl printk no_frame: ldmfd sp!, {r4 - r8, pc} -ENDPROC(__backtrace) ENDPROC(c_backtrace) .pushsection __ex_table,"a" diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index faa7748142d..e55c4842c29 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> +#include <asm/unwind.h> #ifdef __ARMEB__ #define xh r0 @@ -44,6 +45,7 @@ */ ENTRY(__do_div64) +UNWIND(.fnstart) @ Test for easy paths first. subs ip, r4, #1 @@ -189,7 +191,12 @@ ENTRY(__do_div64) moveq yh, xh moveq xh, #0 moveq pc, lr +UNWIND(.fnend) +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) +Ldiv0_64: @ Division by 0: str lr, [sp, #-8]! bl __div0 @@ -200,4 +207,5 @@ ENTRY(__do_div64) mov xh, #0 ldr pc, [sp], #8 +UNWIND(.fnend) ENDPROC(__do_div64) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 8b9b13649f8..025f742dd4d 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ #include <linux/gfp.h> +#include <linux/highmem.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4b59d96e1cd..a6b7991d7fe 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -182,6 +182,11 @@ config MACH_ECO920 help Select this if you are using the eco920 board +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- @@ -381,6 +386,14 @@ config MACH_GSIA18S This enables support for the GS_IA18_S board produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + endif if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3ff245ebcad..242174f9f35 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -36,12 +36,13 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o obj-$(CONFIG_MACH_ECO920) += board-eco920.o +obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o +obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o @@ -53,7 +54,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o +obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o # AT91SAM9RL board-specific support @@ -67,6 +68,7 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o +obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 08c665affde..8ddafadfdc7 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -4,15 +4,15 @@ # INITRD_PHYS must be in RAM ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 else - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index bfc684441ef..ecdd54dd68c 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -219,6 +219,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dba0d8d8a4b..a4401d6b5b0 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -16,6 +16,7 @@ #include <asm/mach/irq.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -23,7 +24,6 @@ #include <mach/board.h> #include <mach/cpu.h> -#include <mach/gpio.h> #include <mach/at91cap9.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> @@ -80,6 +80,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) at91_set_gpio_output(data->vbus_pin[i], 0); } + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_data = *data; platform_device_register(&at91_usbh_device); } diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index f73302dbc6a..713d3bdbd28 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -193,6 +193,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7227755ffec..01d8bbd1468 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -14,11 +14,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> @@ -60,9 +60,17 @@ static struct platform_device at91rm9200_usbh_device = { void __init at91_add_device_usbh(struct at91_usbh_data *data) { + int i; + if (!data) return; + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_data = *data; platform_device_register(&at91rm9200_usbh_device); } diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f4518b49cb8..b84a9f642f5 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -207,6 +207,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 39f81f47b4b..24b6f8c0440 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> @@ -61,9 +61,17 @@ static struct platform_device at91_usbh_device = { void __init at91_add_device_usbh(struct at91_usbh_data *data) { + int i; + if (!data) return; + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_data = *data; platform_device_register(&at91_usbh_device); } @@ -319,7 +327,7 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) if (!data) return; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (data->slot[i].bus_width) { /* input/irq */ if (data->slot[i].detect_pin) { diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 6c8e3b5f669..658a5185abf 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -129,6 +129,20 @@ static struct clk lcdc_clk = { .type = CLK_TYPE_PERIPHERAL, }; +/* HClocks */ +static struct clk hck0 = { + .name = "hck0", + .pmc_mask = AT91_PMC_HCK0, + .type = CLK_TYPE_SYSTEM, + .id = 0, +}; +static struct clk hck1 = { + .name = "hck1", + .pmc_mask = AT91_PMC_HCK1, + .type = CLK_TYPE_SYSTEM, + .id = 1, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -161,6 +175,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -199,20 +214,6 @@ static struct clk pck3 = { .id = 3, }; -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - static void __init at91sam9261_register_clocks(void) { int i; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 0f917928eeb..3b70b3897d9 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -14,6 +14,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91sam9_smc.h> @@ -64,9 +64,17 @@ static struct platform_device at91sam9261_usbh_device = { void __init at91_add_device_usbh(struct at91_usbh_data *data) { + int i; + if (!data) return; + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_data = *data; platform_device_register(&at91sam9261_usbh_device); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 044f3c927e6..f83fbb0ee0c 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -189,6 +189,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index a050f41fc86..3faa1fde9ad 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -20,7 +21,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91sam9_smc.h> @@ -74,6 +74,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) at91_set_gpio_output(data->vbus_pin[i], 0); } + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_data = *data; platform_device_register(&at91_usbh_device); } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 0fe1c305e08..318b0407ea0 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -54,6 +54,11 @@ static struct clk pioDE_clk = { .pmc_mask = 1 << AT91SAM9G45_ID_PIODE, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk trng_clk = { + .name = "trng_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_TRNG, + .type = CLK_TYPE_PERIPHERAL, +}; static struct clk usart0_clk = { .name = "usart0_clk", .pmc_mask = 1 << AT91SAM9G45_ID_US0, @@ -177,6 +182,7 @@ static struct clk *periph_clocks[] __initdata = { &pioB_clk, &pioC_clk, &pioDE_clk, + &trng_clk, &usart0_clk, &usart1_clk, &usart2_clk, @@ -216,12 +222,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk), + /* fake hclk clock */ + CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 600bffb01ed..000b5e1da96 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -21,7 +22,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91sam9_smc.h> @@ -124,6 +124,12 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) at91_set_gpio_output(data->vbus_pin[i], 0); } + /* Enable overcurrent notification */ + for (i = 0; i < data->ports; i++) { + if (data->overcurrent_pin[i]) + at91_set_gpio_input(data->overcurrent_pin[i], 1); + } + usbh_ohci_data = *data; platform_device_register(&at91_usbh_ohci_device); } @@ -1095,6 +1101,34 @@ static void __init at91_add_device_rtt(void) /* -------------------------------------------------------------------- + * TRNG + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE) +static struct resource trng_resources[] = { + { + .start = AT91SAM9G45_BASE_TRNG, + .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device at91sam9g45_trng_device = { + .name = "atmel-trng", + .id = -1, + .resource = trng_resources, + .num_resources = ARRAY_SIZE(trng_resources), +}; + +static void __init at91_add_device_trng(void) +{ + platform_device_register(&at91sam9g45_trng_device); +} +#else +static void __init at91_add_device_trng(void) {} +#endif + +/* -------------------------------------------------------------------- * Watchdog * -------------------------------------------------------------------- */ @@ -1583,6 +1617,7 @@ static int __init at91_add_standard_devices(void) at91_add_device_hdmac(); at91_add_device_rtc(); at91_add_device_rtt(); + at91_add_device_trng(); at91_add_device_watchdog(); at91_add_device_tc(); return 0; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index aacb19dc922..305a851b5bf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -10,6 +10,7 @@ #include <asm/mach/map.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -17,7 +18,6 @@ #include <video/atmel_lcdc.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91sam9_smc.h> diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 5aa58851eb3..367d5cd5e36 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b0c796d42e4..0487ea10c2d 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -25,6 +25,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index d1abd5898e8..747b2eaa973 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 679b0b743e9..062670351a6 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/map.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index c578c5d9072..774c87fcbd5 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index f4da8a16d5d..fc885a4ce24 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2d919f5a4f5..d35e65b08cc 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -36,7 +37,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 17654d5e94e..c3936665e64 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 72b55674616..586100e2acb 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -35,7 +36,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 01170a2766a..45db7a3dbef 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 7c0313c51f2..2f9c16d2921 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 4a170890b3b..3bae73e6363 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -19,6 +19,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 9dc8d496ead..15a3f1a87ab 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -35,7 +36,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include <mach/at91rm9200_mc.h> diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9bc6ab32e0a..6094496f7ed 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b7b8390e8a0..0a8fe6a1b7c 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 81f91103368..938cc390bea 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -40,7 +41,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 6f08faadb47..b4ac30e38a9 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 85bcccd7b9e..99fd7f8aee0 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c new file mode 100644 index 00000000000..e927df0175d --- /dev/null +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -0,0 +1,233 @@ +/* + * board-rsi-ews.c + * + * Copyright (C) + * 2005 SAN People, + * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include <linux/gpio.h> + +#include "generic.h" + +static void __init rsi_ews_init_early(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91_initialize(18432000); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); + + /* DBGU on ttyS0. (Rx & Tx only) */ + /* This one is for debugging */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + /* Dialin/-out modem interface */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART3 on ttyS4. (Rx, Tx, RTS) */ + /* RS485 communication */ + at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +/* + * Ethernet + */ +static struct at91_eth_data rsi_ews_eth_data __initdata = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +/* + * USB Host + */ +static struct at91_usbh_data rsi_ews_usbh_data __initdata = { + .ports = 1, +}; + +/* + * SD/MC + */ +static struct at91_mmc_data rsi_ews_mmc_data __initdata = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PB29, +}; + +/* + * I2C + */ +static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, + { + I2C_BOARD_INFO("24c01", 0x50), + } +}; + +/* + * LEDs + */ +static struct gpio_led rsi_ews_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB6, + .active_low = 0, + }, + { + .name = "led1", + .gpio = AT91_PIN_PB7, + .active_low = 0, + }, + { + .name = "led2", + .gpio = AT91_PIN_PB8, + .active_low = 0, + }, + { + .name = "led3", + .gpio = AT91_PIN_PB9, + .active_low = 0, + }, +}; + +/* + * DataFlash + */ +static struct spi_board_info rsi_ews_spi_devices[] = { + { /* DataFlash chip 1*/ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 5 * 1000 * 1000, + }, + { /* DataFlash chip 2*/ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 5 * 1000 * 1000, + }, +}; + +/* + * NOR flash + */ +static struct mtd_partition rsiews_nor_partitions[] = { + { + .name = "boot", + .offset = 0, + .size = 3 * SZ_128K, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_2M - (3 * SZ_128K) + }, + { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_8M + }, + { + .name = "kernelupd", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_512K, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "rootupd", + .offset = MTDPART_OFS_NXTBLK, + .size = 9 * SZ_512K, + .mask_flags = MTD_WRITEABLE + }, +}; + +static struct physmap_flash_data rsiews_nor_data = { + .width = 2, + .parts = rsiews_nor_partitions, + .nr_parts = ARRAY_SIZE(rsiews_nor_partitions), +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE SZ_16M + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device rsiews_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rsiews_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +/* + * Init Func + */ +static void __init rsi_ews_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + at91_set_gpio_output(AT91_PIN_PA21, 0); + /* Ethernet */ + at91_add_device_eth(&rsi_ews_eth_data); + /* USB Host */ + at91_add_device_usbh(&rsi_ews_usbh_data); + /* I2C */ + at91_add_device_i2c(rsi_ews_i2c_devices, + ARRAY_SIZE(rsi_ews_i2c_devices)); + /* SPI */ + at91_add_device_spi(rsi_ews_spi_devices, + ARRAY_SIZE(rsi_ews_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &rsi_ews_mmc_data); + /* NOR Flash */ + platform_device_register(&rsiews_nor_flash); + /* LEDs */ + at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds)); +} + +MACHINE_START(RSI_EWS, "RSI EWS") + /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .init_early = rsi_ews_init_early, + .init_irq = at91_init_irq_default, + .init_machine = rsi_ews_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 4d3a02f1289..2a21e790250 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -37,7 +38,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8a50c3e6718..89c8b579bfd 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 5096a0ec50c..3741f43cdae 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -45,7 +46,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ea8f185d3b9..a580dd451a4 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -44,7 +45,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 817f59d7251..8d77c2ff96b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -18,6 +18,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -41,7 +42,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ad234ccbf57..2d6203ac1a4 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -14,6 +14,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -38,7 +39,6 @@ #include <asm/mach/irq.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 4f14b54b93a..39a28effc3d 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -8,6 +8,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -30,7 +31,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c deleted file mode 100644 index 8c4c1a02c4b..00000000000 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-usb-a9260.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2007 Calao-systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA31, - .is_rmii = 1, -}; - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Uboot & Kernel", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Root FS", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, - { - .name = "FS", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, -// .det_pin = ... not connected - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - -/* - * GPIO Buttons - */ - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* USER PUSH BUTTON */ - .code = KEY_ENTER, - .gpio = AT91_PIN_PB10, - .active_low = 1, - .desc = "user_pb", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */ - at91_set_deglitch(AT91_PIN_PB10, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* user_led (green) */ - .name = "user_led", - .gpio = AT91_PIN_PB21, - .active_low = 0, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* NAND */ - ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW - | AT91_SHDW_RTTWKEN); -} - -MACHINE_START(USB_A9260, "CALAO USB_A9260") - /* Maintainer: calao-systems */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a926x.c index 25e793782a4..5852d3d9890 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -1,9 +1,10 @@ /* - * linux/arch/arm/mach-at91/board-usb-a9263.c + * linux/arch/arm/mach-at91/board-usb-a926x.c * * Copyright (C) 2005 SAN People * Copyright (C) 2007 Atmel Corporation. * Copyright (C) 2007 Calao-systems + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,7 +28,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/gpio_keys.h> +#include <linux/gpio.h> #include <linux/input.h> +#include <linux/spi/mmc_spi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -39,7 +42,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -74,10 +76,42 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = 0, /* pull-up driven by UDC */ }; +static void __init ek_add_device_udc(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_udc_data.vbus_pin = AT91_PIN_PC5; + + at91_add_device_udc(&ek_udc_data); +} + +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4 +static int at91_mmc_spi_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *), void *data) +{ + /* Configure Interrupt pin as input, no pull-up */ + at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0); + return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-spi-detect", data); +} + +static void at91_mmc_spi_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data); +} + +static struct mmc_spi_platform_data at91_mmc_spi_pdata = { + .init = at91_mmc_spi_init, + .exit = at91_mmc_spi_exit, + .detect_delay = 100, /* msecs */ +}; +#endif + /* * SPI devices. */ -static struct spi_board_info ek_spi_devices[] = { +static struct spi_board_info usb_a9263_spi_devices[] = { #if !defined(CONFIG_MMC_AT91) { /* DataFlash chip */ .modalias = "mtd_dataflash", @@ -88,6 +122,27 @@ static struct spi_board_info ek_spi_devices[] = { #endif }; +static struct spi_board_info usb_a9g20_spi_devices[] = { +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) + { + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 0, + .platform_data = &at91_mmc_spi_pdata, + .mode = SPI_MODE_3, + }, +#endif +}; + +static void __init ek_add_device_spi(void) +{ + if (machine_is_usb_a9263()) + at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices)); + else if (machine_is_usb_a9g20()) + at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices)); +} + /* * MACB Ethernet device */ @@ -96,24 +151,42 @@ static struct at91_eth_data __initdata ek_macb_data = { .is_rmii = 1, }; +static void __init ek_add_device_eth(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_macb_data.phy_irq_pin = AT91_PIN_PA31; + + at91_add_device_eth(&ek_macb_data); +} + /* * NAND flash */ static struct mtd_partition __initdata ek_nand_partition[] = { { - .name = "Linux Kernel", + .name = "barebox", .offset = 0, - .size = SZ_16M, - }, - { - .name = "Root FS", + .size = 3 * SZ_128K, + }, { + .name = "bareboxenv", .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, - { - .name = "FS", + .size = SZ_128K, + }, { + .name = "bareboxenv2", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + }, { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 4 * SZ_1M, + }, { + .name = "rootfs", .offset = MTDPART_OFS_NXTBLK, .size = 120 * SZ_1M, + }, { + .name = "data", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, } }; @@ -132,7 +205,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .partition_info = nand_partitions, }; -static struct sam9_smc_config __initdata ek_nand_smc_config = { +static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = { .ncs_read_setup = 0, .nrd_setup = 1, .ncs_write_setup = 0, @@ -150,10 +223,36 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { .tdf_cycles = 2, }; +static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 3, +}; + static void __init ek_add_device_nand(void) { + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) { + ek_nand_data.rdy_pin = AT91_PIN_PC13; + ek_nand_data.enable_pin = AT91_PIN_PC14; + } + /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + if (machine_is_usb_a9g20()) + sam9_smc_configure(3, &usb_a9g20_nand_smc_config); + else + sam9_smc_configure(3, &usb_a9260_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -210,6 +309,19 @@ static struct gpio_led ek_leds[] = { } }; +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("rv3029c2", 0x56), + }, +}; + +static void __init ek_add_device_leds(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_leds[0].active_low = 0; + + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); +} static void __init ek_board_init(void) { @@ -218,22 +330,29 @@ static void __init ek_board_init(void) /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ - at91_add_device_udc(&ek_udc_data); + ek_add_device_udc(); /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + ek_add_device_spi(); /* Ethernet */ - at91_add_device_eth(&ek_macb_data); + ek_add_device_eth(); /* NAND */ ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(NULL, 0); /* Push Buttons */ ek_add_device_buttons(); /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW + ek_add_device_leds(); + + if (machine_is_usb_a9g20()) { + /* I2C */ + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); + } else { + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* shutdown controller, wakeup button (5 msec low) */ + at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) + | AT91_SHDW_WKMODE0_LOW | AT91_SHDW_RTTWKEN); + } } MACHINE_START(USB_A9263, "CALAO USB_A9263") @@ -244,3 +363,21 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END + +MACHINE_START(USB_A9260, "CALAO USB_A9260") + /* Maintainer: calao-systems */ + .timer = &at91sam926x_timer, + .map_io = at91_map_io, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + +MACHINE_START(USB_A9G20, "CALAO USB_A92G0") + /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ + .timer = &at91sam926x_timer, + .map_io = at91_map_io, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 95edcbd2aec..3c288b396fc 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -22,6 +22,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -43,7 +44,6 @@ #include <mach/hardware.h> #include <mach/board.h> -#include <mach/gpio.h> #include <mach/at91rm9200_mc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 4615528205c..224e9e2f867 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/errno.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/debugfs.h> @@ -22,9 +23,6 @@ #include <mach/hardware.h> #include <mach/at91_pio.h> -#include <mach/gpio.h> - -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index ed544a0d5a1..d07767f4052 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -98,6 +98,11 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); struct at91_usbh_data { u8 ports; /* number of ports on root hub */ u8 vbus_pin[2]; /* port power-control pin */ + u8 vbus_pin_inverted; + u8 overcurrent_supported; + u8 overcurrent_pin[2]; + u8 overcurrent_status[2]; + u8 overcurrent_changed[2]; }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 056dc6674b6..2b9a1f51210 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -214,11 +214,6 @@ extern void at91_gpio_resume(void); */ #include <asm/errno.h> -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(gpio) (gpio) #define irq_to_gpio(irq) (irq) diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 31ac2d97f14..85820ad801c 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -64,7 +64,12 @@ #elif defined(CONFIG_ARCH_AT91SAM9G20) +#if defined(CONFIG_MACH_USB_A9G20) +#define AT91SAM9_MASTER_CLOCK 133000000 +#else #define AT91SAM9_MASTER_CLOCK 132096000 +#endif + #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0415a839e1a..8dfafe76ffe 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -9,13 +9,13 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> #include <mach/board.h> -#include <mach/gpio.h> /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4159eca7894..7046158109d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -10,6 +10,7 @@ * (at your option) any later version. */ +#include <linux/gpio.h> #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> @@ -25,7 +26,6 @@ #include <asm/mach/irq.h> #include <mach/at91_pmc.h> -#include <mach/gpio.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig index 457b4384913..9170d16dca5 100644 --- a/arch/arm/mach-bcmring/Kconfig +++ b/arch/arm/mach-bcmring/Kconfig @@ -17,5 +17,3 @@ config BCM_ZRELADDR hex "Compressed ZREL ADDR" endmenu - -# source "drivers/char/bcmring/Kconfig" diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot index fb53b283beb..aef2467757f 100644 --- a/arch/arm/mach-bcmring/Makefile.boot +++ b/arch/arm/mach-bcmring/Makefile.boot @@ -1,6 +1,6 @@ # Address where decompressor will be written and eventually executed. # # default to SDRAM -zreladdr-y := $(CONFIG_BCM_ZRELADDR) +zreladdr-y += $(CONFIG_BCM_ZRELADDR) params_phys-y := 0x00000800 diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index a604b9ebb50..31a143592c8 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -136,8 +136,8 @@ static void __init bcmring_init_machine(void) * *****************************************************************************/ -static void __init bcmring_fixup(struct machine_desc *desc, - struct tag *t, char **cmdline, struct meminfo *mi) { +static void __init bcmring_fixup(struct tag *t, char **cmdline, + struct meminfo *mi) { #ifdef CONFIG_BLK_DEV_INITRD printk(KERN_NOTICE "bcmring_fixup\n"); t->hdr.tag = ATAG_CORE; diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c index c48feaf4e8e..437fa683bcb 100644 --- a/arch/arm/mach-bcmring/irq.c +++ b/arch/arm/mach-bcmring/irq.c @@ -20,7 +20,6 @@ #include <linux/stddef.h> #include <linux/list.h> #include <linux/timer.h> -#include <linux/version.h> #include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c index 2d415d2a8e6..af9c3d7e2a0 100644 --- a/arch/arm/mach-bcmring/timer.c +++ b/arch/arm/mach-bcmring/timer.c @@ -12,7 +12,6 @@ * consent. *****************************************************************************/ -#include <linux/version.h> #include <linux/types.h> #include <linux/module.h> #include <csp/tmrHw.h> diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index a51fcef64fe..9398e859b5a 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +1,5 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y := 0xc0028000 + zreladdr-y += 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 06c8abd9371..80496c09ac5 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -26,8 +26,7 @@ #include "common.h" static void __init -fixup_clep7312(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = 0xc0000000; diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index abf522d1ec9..9721f6111dc 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -37,8 +37,7 @@ static void __init edb7211_reserve(void) } static void __init -fixup_edb7211(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) { /* * Bank start addresses are not present in the information diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index b6f7d86bb1c..d9925668729 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -57,8 +57,7 @@ typedef struct tag_IMAGE_PARAMS #define IMAGE_PARAMS_PHYS 0xC01F0000 static void __init -fortunet_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS); *cmdline = phys_to_virt(ip->command_line); diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index e7f75aeb1e5..6ecea95f38b 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -56,8 +56,7 @@ static struct map_desc p720t_io_desc[] __initdata = { }; static void __init -fixup_p720t(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) { /* * Our bootloader doesn't setup any tags (yet). diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot index 77701286522..d079de0b6e3 100644 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ b/arch/arm/mach-cns3xxx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index c0deacae778..32d837d8eab 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -192,6 +192,16 @@ config DA850_UI_RMII endchoice +config DA850_WL12XX + bool "AM18x wl1271 daughter board" + depends on MACH_DAVINCI_DA850_EVM + help + The wl1271 daughter card for AM18x EVMs is a combo wireless + connectivity add-on card, based on the LS Research TiWi module with + Texas Instruments' wl1271 solution. + Say Y if you want to use a wl1271 expansion card connected to the + AM18x EVM. + config GPIO_PCA953X default MACH_DAVINCI_DA850_EVM diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 0b87a1ca2bb..495e31306fc 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o dma.o usb.o common.o sram.o aemif.o + dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o @@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o -obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index db97ef2c647..04a6c4e67b1 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -2,12 +2,12 @@ ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y) ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) $(error Cannot enable DaVinci and DA8XX platforms concurrently) else - zreladdr-y := 0xc0008000 + zreladdr-y += 0xc0008000 params_phys-y := 0xc0000100 initrd_phys-y := 0xc0800000 endif else - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 endif diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6e41cb5baeb..ec21663f8dd 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -31,6 +31,8 @@ #include <linux/input/tps6507x-ts.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/delay.h> +#include <linux/wl12xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -49,6 +51,9 @@ #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) +#define DA850_WLAN_EN GPIO_TO_PIN(6, 9) +#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10) + #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) static struct mtd_partition da850evm_spiflash_part[] = { @@ -1143,6 +1148,110 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#ifdef CONFIG_DA850_WL12XX + +static void wl12xx_set_power(int index, bool power_on) +{ + static bool power_state; + + pr_debug("Powering %s wl12xx", power_on ? "on" : "off"); + + if (power_on == power_state) + return; + power_state = power_on; + + if (power_on) { + /* Power up sequence required for wl127x devices */ + gpio_set_value(DA850_WLAN_EN, 1); + usleep_range(15000, 15000); + gpio_set_value(DA850_WLAN_EN, 0); + usleep_range(1000, 1000); + gpio_set_value(DA850_WLAN_EN, 1); + msleep(70); + } else { + gpio_set_value(DA850_WLAN_EN, 0); + } +} + +static struct davinci_mmc_config da850_wl12xx_mmc_config = { + .set_power = wl12xx_set_power, + .wires = 4, + .max_freq = 25000000, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | + MMC_CAP_POWER_OFF_CARD, + .version = MMC_CTLR_VERSION_2, +}; + +static const short da850_wl12xx_pins[] __initconst = { + DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2, + DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD, + DA850_GPIO6_9, DA850_GPIO6_10, + -1 +}; + +static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = { + .irq = -1, + .board_ref_clock = WL12XX_REFCLOCK_38, + .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ, +}; + +static __init int da850_wl12xx_init(void) +{ + int ret; + + ret = davinci_cfg_reg_list(da850_wl12xx_pins); + if (ret) { + pr_err("wl12xx/mmc mux setup failed: %d\n", ret); + goto exit; + } + + ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config); + if (ret) { + pr_err("wl12xx/mmc registration failed: %d\n", ret); + goto exit; + } + + ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en"); + if (ret) { + pr_err("Could not request wl12xx enable gpio: %d\n", ret); + goto exit; + } + + ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq"); + if (ret) { + pr_err("Could not request wl12xx irq gpio: %d\n", ret); + goto free_wlan_en; + } + + da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ); + + ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data); + if (ret) { + pr_err("Could not set wl12xx data: %d\n", ret); + goto free_wlan_irq; + } + + return 0; + +free_wlan_irq: + gpio_free(DA850_WLAN_IRQ); + +free_wlan_en: + gpio_free(DA850_WLAN_EN); + +exit: + return ret; +} + +#else /* CONFIG_DA850_WL12XX */ + +static __init int da850_wl12xx_init(void) +{ + return 0; +} + +#endif /* CONFIG_DA850_WL12XX */ + #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) static __init void da850_evm_init(void) @@ -1197,6 +1306,11 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: mmcsd0 registration failed:" " %d\n", ret); + + ret = da850_wl12xx_init(); + if (ret) + pr_warning("da850_evm_init: wl12xx initialization" + " failed: %d\n", ret); } davinci_serial_init(&da850_evm_uart_config); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 2ed2f822fc4..a6bf5dcaef1 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> @@ -19,7 +20,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 935dbed5c54..b047f870227 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,6 +11,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/platform_device.h> @@ -27,7 +28,7 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -535,6 +536,13 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MMCSD0_DAT_3, 10, 20, 15, 2, false) MUX_CFG(DA850, MMCSD0_CLK, 10, 0, 15, 2, false) MUX_CFG(DA850, MMCSD0_CMD, 10, 4, 15, 2, false) + /* MMC/SD1 function */ + MUX_CFG(DA850, MMCSD1_DAT_0, 18, 8, 15, 2, false) + MUX_CFG(DA850, MMCSD1_DAT_1, 19, 16, 15, 2, false) + MUX_CFG(DA850, MMCSD1_DAT_2, 19, 12, 15, 2, false) + MUX_CFG(DA850, MMCSD1_DAT_3, 19, 8, 15, 2, false) + MUX_CFG(DA850, MMCSD1_CLK, 18, 12, 15, 2, false) + MUX_CFG(DA850, MMCSD1_CMD, 18, 16, 15, 2, false) /* EMIF2.5/EMIFA function */ MUX_CFG(DA850, EMA_D_7, 9, 0, 15, 1, false) MUX_CFG(DA850, EMA_D_6, 9, 4, 15, 1, false) @@ -593,6 +601,8 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) + MUX_CFG(DA850, GPIO6_9, 13, 24, 15, 8, false) + MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false) MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false) MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) #endif diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2f7e719636f..68def718886 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -136,6 +136,7 @@ static struct edma_soc_info da830_edma_cc0_info = { .n_cc = 1, .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, + .default_queue = EVENTQ_1, }; static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { @@ -151,6 +152,7 @@ static struct edma_soc_info da850_edma_cc_info[] = { .n_cc = 1, .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, + .default_queue = EVENTQ_1, }, { .n_channel = 32, @@ -160,6 +162,7 @@ static struct edma_soc_info da850_edma_cc_info[] = { .n_cc = 1, .queue_tc_mapping = da850_queue_tc_mapping, .queue_priority_mapping = da850_queue_priority_mapping, + .default_queue = EVENTQ_0, }, }; diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 6162cae7f86..29b17f7d3a5 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -80,6 +80,7 @@ static struct edma_soc_info edma_cc0_info = { .n_cc = 1, .queue_tc_mapping = edma_tc_mapping, .queue_priority_mapping = edma_priority_mapping, + .default_queue = EVENTQ_1, }; static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a3a94e9c937..fe520d4167a 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,7 +13,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> @@ -30,6 +29,7 @@ #include <mach/common.h> #include <mach/asp.h> #include <mach/spi.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -591,6 +591,7 @@ static struct edma_soc_info edma_cc0_info = { .n_cc = 1, .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, + .default_queue = EVENTQ_1, }; static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 4604e72d7d9..679e168dce3 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,7 +17,6 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <asm/mach/map.h> @@ -34,7 +33,7 @@ #include <mach/asp.h> #include <mach/keyscan.h> #include <mach/spi.h> - +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4c82c271629..3470983aa34 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,7 +12,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -26,6 +25,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -514,6 +514,7 @@ static struct edma_soc_info edma_cc0_info = { .n_cc = 1, .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, + .default_queue = EVENTQ_1, }; static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1802e711a2b..0b68ed534f8 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,7 +13,6 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <asm/mach/map.h> @@ -27,6 +26,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -555,6 +555,7 @@ static struct edma_soc_info edma_cc0_info = { .n_cc = 1, .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, + .default_queue = EVENTQ_1, }; static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = { diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 6b9669869c4..da90103a313 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -1435,12 +1435,11 @@ static int __init edma_probe(struct platform_device *pdev) goto fail1; } - edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL); + edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL); if (!edma_cc[j]) { status = -ENOMEM; goto fail1; } - memset(edma_cc[j], 0, sizeof(struct edma)); edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, EDMA_MAX_DMACH); @@ -1450,8 +1449,6 @@ static int __init edma_probe(struct platform_device *pdev) EDMA_MAX_CC); edma_cc[j]->default_queue = info[j]->default_queue; - if (!edma_cc[j]->default_queue) - edma_cc[j]->default_queue = EVENTQ_1; dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base[j]); diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c deleted file mode 100644 index 3fa3e2867e1..00000000000 --- a/arch/arm/mach-davinci/gpio-tnetv107x.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Texas Instruments TNETV107X GPIO Controller - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> - -#include <mach/common.h> -#include <mach/tnetv107x.h> - -struct tnetv107x_gpio_regs { - u32 idver; - u32 data_in[3]; - u32 data_out[3]; - u32 direction[3]; - u32 enable[3]; -}; - -#define gpio_reg_index(gpio) ((gpio) >> 5) -#define gpio_reg_bit(gpio) BIT((gpio) & 0x1f) - -#define gpio_reg_rmw(reg, mask, val) \ - __raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg)) - -#define gpio_reg_set_bit(reg, gpio) \ - gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio)) - -#define gpio_reg_clear_bit(reg, gpio) \ - gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0) - -#define gpio_reg_get_bit(reg, gpio) \ - (__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio)) - -#define chip2controller(chip) \ - container_of(chip, struct davinci_gpio_controller, chip) - -#define TNETV107X_GPIO_CTLRS DIV_ROUND_UP(TNETV107X_N_GPIO, 32) - -static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS]; - -static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_set_bit(regs->enable, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_clear_bit(regs->enable, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); -} - -static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - gpio_reg_set_bit(regs->direction, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static int tnetv107x_gpio_dir_out(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - if (value) - gpio_reg_set_bit(regs->data_out, gpio); - else - gpio_reg_clear_bit(regs->data_out, gpio); - - gpio_reg_clear_bit(regs->direction, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); - - return 0; -} - -static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - int ret; - - ret = gpio_reg_get_bit(regs->data_in, gpio); - - return ret ? 1 : 0; -} - -static void tnetv107x_gpio_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct davinci_gpio_controller *ctlr = chip2controller(chip); - struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; - unsigned gpio = chip->base + offset; - unsigned long flags; - - spin_lock_irqsave(&ctlr->lock, flags); - - if (value) - gpio_reg_set_bit(regs->data_out, gpio); - else - gpio_reg_clear_bit(regs->data_out, gpio); - - spin_unlock_irqrestore(&ctlr->lock, flags); -} - -static int __init tnetv107x_gpio_setup(void) -{ - int i, base; - unsigned ngpio; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct tnetv107x_gpio_regs *regs; - struct davinci_gpio_controller *ctlr; - - if (soc_info->gpio_type != GPIO_TYPE_TNETV107X) - return 0; - - ngpio = soc_info->gpio_num; - if (ngpio == 0) { - pr_err("GPIO setup: how many GPIOs?\n"); - return -EINVAL; - } - - if (WARN_ON(TNETV107X_N_GPIO < ngpio)) - ngpio = TNETV107X_N_GPIO; - - regs = ioremap(soc_info->gpio_base, SZ_4K); - if (WARN_ON(!regs)) - return -EINVAL; - - for (i = 0, base = 0; base < ngpio; i++, base += 32) { - ctlr = &chips[i]; - - ctlr->chip.label = "tnetv107x"; - ctlr->chip.can_sleep = 0; - ctlr->chip.base = base; - ctlr->chip.ngpio = ngpio - base; - if (ctlr->chip.ngpio > 32) - ctlr->chip.ngpio = 32; - - ctlr->chip.request = tnetv107x_gpio_request; - ctlr->chip.free = tnetv107x_gpio_free; - ctlr->chip.direction_input = tnetv107x_gpio_dir_in; - ctlr->chip.get = tnetv107x_gpio_get; - ctlr->chip.direction_output = tnetv107x_gpio_dir_out; - ctlr->chip.set = tnetv107x_gpio_set; - - spin_lock_init(&ctlr->lock); - - ctlr->regs = regs; - ctlr->set_data = ®s->data_out[i]; - ctlr->clr_data = ®s->data_out[i]; - ctlr->in_data = ®s->data_in[i]; - - gpiochip_add(&ctlr->chip); - } - - soc_info->gpio_ctlrs = chips; - soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); - return 0; -} -pure_initcall(tnetv107x_gpio_setup); diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c deleted file mode 100644 index cafbe13a82a..00000000000 --- a/arch/arm/mach-davinci/gpio.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006-2007 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/gpio.h> - -#include <asm/mach/irq.h> - -struct davinci_gpio_regs { - u32 dir; - u32 out_data; - u32 set_data; - u32 clr_data; - u32 in_data; - u32 set_rising; - u32 clr_rising; - u32 set_falling; - u32 clr_falling; - u32 intstat; -}; - -#define chip2controller(chip) \ - container_of(chip, struct davinci_gpio_controller, chip) - -static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; -static void __iomem *gpio_base; - -static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio) -{ - void __iomem *ptr; - - if (gpio < 32 * 1) - ptr = gpio_base + 0x10; - else if (gpio < 32 * 2) - ptr = gpio_base + 0x38; - else if (gpio < 32 * 3) - ptr = gpio_base + 0x60; - else if (gpio < 32 * 4) - ptr = gpio_base + 0x88; - else if (gpio < 32 * 5) - ptr = gpio_base + 0xb0; - else - ptr = NULL; - return ptr; -} - -static inline struct davinci_gpio_regs __iomem *irq2regs(int irq) -{ - struct davinci_gpio_regs __iomem *g; - - g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq); - - return g; -} - -static int __init davinci_gpio_irq_setup(void); - -/*--------------------------------------------------------------------------*/ - -/* board setup code *MUST* setup pinmux and enable the GPIO clock. */ -static inline int __davinci_direction(struct gpio_chip *chip, - unsigned offset, bool out, int value) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - unsigned long flags; - u32 temp; - u32 mask = 1 << offset; - - spin_lock_irqsave(&d->lock, flags); - temp = __raw_readl(&g->dir); - if (out) { - temp &= ~mask; - __raw_writel(mask, value ? &g->set_data : &g->clr_data); - } else { - temp |= mask; - } - __raw_writel(temp, &g->dir); - spin_unlock_irqrestore(&d->lock, flags); - - return 0; -} - -static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) -{ - return __davinci_direction(chip, offset, false, 0); -} - -static int -davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) -{ - return __davinci_direction(chip, offset, true, value); -} - -/* - * Read the pin's value (works even if it's set up as output); - * returns zero/nonzero. - * - * Note that changes are synched to the GPIO clock, so reading values back - * right after you've set them may give old values. - */ -static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - - return (1 << offset) & __raw_readl(&g->in_data); -} - -/* - * Assuming the pin is muxed as a gpio output, set its output value. - */ -static void -davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - struct davinci_gpio_regs __iomem *g = d->regs; - - __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data); -} - -static int __init davinci_gpio_setup(void) -{ - int i, base; - unsigned ngpio; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs *regs; - - if (soc_info->gpio_type != GPIO_TYPE_DAVINCI) - return 0; - - /* - * The gpio banks conceptually expose a segmented bitmap, - * and "ngpio" is one more than the largest zero-based - * bit index that's valid. - */ - ngpio = soc_info->gpio_num; - if (ngpio == 0) { - pr_err("GPIO setup: how many GPIOs?\n"); - return -EINVAL; - } - - if (WARN_ON(DAVINCI_N_GPIO < ngpio)) - ngpio = DAVINCI_N_GPIO; - - gpio_base = ioremap(soc_info->gpio_base, SZ_4K); - if (WARN_ON(!gpio_base)) - return -ENOMEM; - - for (i = 0, base = 0; base < ngpio; i++, base += 32) { - chips[i].chip.label = "DaVinci"; - - chips[i].chip.direction_input = davinci_direction_in; - chips[i].chip.get = davinci_gpio_get; - chips[i].chip.direction_output = davinci_direction_out; - chips[i].chip.set = davinci_gpio_set; - - chips[i].chip.base = base; - chips[i].chip.ngpio = ngpio - base; - if (chips[i].chip.ngpio > 32) - chips[i].chip.ngpio = 32; - - spin_lock_init(&chips[i].lock); - - regs = gpio2regs(base); - chips[i].regs = regs; - chips[i].set_data = ®s->set_data; - chips[i].clr_data = ®s->clr_data; - chips[i].in_data = ®s->in_data; - - gpiochip_add(&chips[i].chip); - } - - soc_info->gpio_ctlrs = chips; - soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); - - davinci_gpio_irq_setup(); - return 0; -} -pure_initcall(davinci_gpio_setup); - -/*--------------------------------------------------------------------------*/ -/* - * We expect irqs will normally be set up as input pins, but they can also be - * used as output pins ... which is convenient for testing. - * - * NOTE: The first few GPIOs also have direct INTC hookups in addition - * to their GPIOBNK0 irq, with a bit less overhead. - * - * All those INTC hookups (direct, plus several IRQ banks) can also - * serve as EDMA event triggers. - */ - -static void gpio_irq_disable(struct irq_data *d) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - __raw_writel(mask, &g->clr_falling); - __raw_writel(mask, &g->clr_rising); -} - -static void gpio_irq_enable(struct irq_data *d) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - unsigned status = irqd_get_trigger_type(d); - - status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - if (!status) - status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - - if (status & IRQ_TYPE_EDGE_FALLING) - __raw_writel(mask, &g->set_falling); - if (status & IRQ_TYPE_EDGE_RISING) - __raw_writel(mask, &g->set_rising); -} - -static int gpio_irq_type(struct irq_data *d, unsigned trigger) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - return -EINVAL; - - return 0; -} - -static struct irq_chip gpio_irqchip = { - .name = "GPIO", - .irq_enable = gpio_irq_enable, - .irq_disable = gpio_irq_disable, - .irq_set_type = gpio_irq_type, - .flags = IRQCHIP_SET_TYPE_MASKED, -}; - -static void -gpio_irq_handler(unsigned irq, struct irq_desc *desc) -{ - struct davinci_gpio_regs __iomem *g; - u32 mask = 0xffff; - struct davinci_gpio_controller *d; - - d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); - g = (struct davinci_gpio_regs __iomem *)d->regs; - - /* we only care about one bank */ - if (irq & 1) - mask <<= 16; - - /* temporarily mask (level sensitive) parent IRQ */ - desc->irq_data.chip->irq_mask(&desc->irq_data); - desc->irq_data.chip->irq_ack(&desc->irq_data); - while (1) { - u32 status; - int n; - int res; - - /* ack any irqs */ - status = __raw_readl(&g->intstat) & mask; - if (!status) - break; - __raw_writel(status, &g->intstat); - - /* now demux them to the right lowlevel handler */ - n = d->irq_base; - if (irq & 1) { - n += 16; - status >>= 16; - } - - while (status) { - res = ffs(status); - n += res; - generic_handle_irq(n - 1); - status >>= res; - } - } - desc->irq_data.chip->irq_unmask(&desc->irq_data); - /* now it may re-trigger */ -} - -static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_gpio_controller *d = chip2controller(chip); - - if (d->irq_base >= 0) - return d->irq_base + offset; - else - return -ENODEV; -} - -static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - /* NOTE: we assume for now that only irqs in the first gpio_chip - * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). - */ - if (offset < soc_info->gpio_unbanked) - return soc_info->gpio_irq + offset; - else - return -ENODEV; -} - -static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger) -{ - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); - - if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - return -EINVAL; - - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); - - return 0; -} - -/* - * NOTE: for suspend/resume, probably best to make a platform_device with - * suspend_late/resume_resume calls hooking into results of the set_wake() - * calls ... so if no gpios are wakeup events the clock can be disabled, - * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * (dm6446) can be set appropriately for GPIOV33 pins. - */ - -static int __init davinci_gpio_irq_setup(void) -{ - unsigned gpio, irq, bank; - struct clk *clk; - u32 binten = 0; - unsigned ngpio, bank_irq; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs __iomem *g; - - ngpio = soc_info->gpio_num; - - bank_irq = soc_info->gpio_irq; - if (bank_irq == 0) { - printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); - return -EINVAL; - } - - clk = clk_get(NULL, "gpio"); - if (IS_ERR(clk)) { - printk(KERN_ERR "Error %ld getting gpio clock?\n", - PTR_ERR(clk)); - return PTR_ERR(clk); - } - clk_enable(clk); - - /* Arrange gpio_to_irq() support, handling either direct IRQs or - * banked IRQs. Having GPIOs in the first GPIO bank use direct - * IRQs, while the others use banked IRQs, would need some setup - * tweaks to recognize hardware which can do that. - */ - for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { - chips[bank].chip.to_irq = gpio_to_irq_banked; - chips[bank].irq_base = soc_info->gpio_unbanked - ? -EINVAL - : (soc_info->intc_irq_num + gpio); - } - - /* - * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO - * controller only handling trigger modes. We currently assume no - * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. - */ - if (soc_info->gpio_unbanked) { - static struct irq_chip gpio_irqchip_unbanked; - - /* pass "bank 0" GPIO IRQs to AINTC */ - chips[0].chip.to_irq = gpio_to_irq_unbanked; - binten = BIT(0); - - /* AINTC handles mask/unmask; GPIO handles triggering */ - irq = bank_irq; - gpio_irqchip_unbanked = *irq_get_chip(irq); - gpio_irqchip_unbanked.name = "GPIO-AINTC"; - gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked; - - /* default trigger: both edges */ - g = gpio2regs(0); - __raw_writel(~0, &g->set_falling); - __raw_writel(~0, &g->set_rising); - - /* set the direct IRQs up to use that irqchip */ - for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { - irq_set_chip(irq, &gpio_irqchip_unbanked); - irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); - irq_set_chip_data(irq, (__force void *)g); - irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); - } - - goto done; - } - - /* - * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we - * then chain through our own handler. - */ - for (gpio = 0, irq = gpio_to_irq(0), bank = 0; - gpio < ngpio; - bank++, bank_irq++) { - unsigned i; - - /* disabled by default, enabled only as needed */ - g = gpio2regs(gpio); - __raw_writel(~0, &g->clr_falling); - __raw_writel(~0, &g->clr_rising); - - /* set up all irqs in this bank */ - irq_set_chained_handler(bank_irq, gpio_irq_handler); - - /* - * Each chip handles 32 gpios, and each irq bank consists of 16 - * gpio irqs. Pass the irq bank's corresponding controller to - * the chained irq handler. - */ - irq_set_handler_data(bank_irq, &chips[gpio / 32]); - - for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { - irq_set_chip(irq, &gpio_irqchip); - irq_set_chip_data(irq, (__force void *)g); - irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); - irq_set_handler(irq, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - } - - binten |= BIT(bank); - } - -done: - /* BINTEN -- per-bank interrupt enable. genirq would also let these - * bits be set/cleared dynamically. - */ - __raw_writel(binten, gpio_base + 0x08); - - printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); - - return 0; -} diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h new file mode 100644 index 00000000000..1fdd1fd3544 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h @@ -0,0 +1,91 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DAVINCI_DAVINCI_GPIO_H +#define __DAVINCI_DAVINCI_GPIO_H + +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm-generic/gpio.h> + +#include <mach/irqs.h> +#include <mach/common.h> + +#define DAVINCI_GPIO_BASE 0x01C67000 + +enum davinci_gpio_type { + GPIO_TYPE_DAVINCI = 0, + GPIO_TYPE_TNETV107X, +}; + +/* + * basic gpio routines + * + * board-specific init should be done by arch/.../.../board-XXX.c (maybe + * initializing banks together) rather than boot loaders; kexec() won't + * go through boot loaders. + * + * the gpio clock will be turned on when gpios are used, and you may also + * need to pay attention to PINMUX registers to be sure those pins are + * used as gpios, not with other peripherals. + * + * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. + * + * GPIOs can also be on external chips, numbered after the ones built-in + * to the DaVinci chip. For now, they won't be usable as IRQ sources. + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; +}; + +/* The __gpio_to_controller() and __gpio_mask() functions inline to constants + * with constant parameters; or in outlined code they execute at runtime. + * + * You'd access the controller directly when reading or writing more than + * one gpio value at a time, and to support wired logic where the value + * being driven by the cpu need not match the value read back. + * + * These are NOT part of the cross-platform GPIO interface + */ +static inline struct davinci_gpio_controller * +__gpio_to_controller(unsigned gpio) +{ + struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; + int index = gpio / 32; + + if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) + return NULL; + + return ctlrs + index; +} + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} + +#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index fbece126c2b..fbaae4772b9 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -13,80 +13,10 @@ #ifndef __DAVINCI_GPIO_H #define __DAVINCI_GPIO_H -#include <linux/io.h> -#include <linux/spinlock.h> - #include <asm-generic/gpio.h> -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} +/* The inline versions use the static inlines in the driver header */ +#include "gpio-davinci.h" /* * The get/set/clear functions will inline when called with constant @@ -147,11 +77,6 @@ static inline int gpio_cansleep(unsigned gpio) return __gpio_cansleep(gpio); } -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { /* don't support the reverse mapping */ diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h index d4f1e967506..5ba6b22ce33 100644 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -12,6 +12,9 @@ struct davinci_mmc_config { /* get_cd()/get_wp() may sleep */ int (*get_cd)(int module); int (*get_ro)(int module); + + void (*set_power)(int module, bool on); + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ u8 wires; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 5d4e0fed828..a7e92fca32e 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -857,6 +857,14 @@ enum davinci_da850_index { DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + /* MMC/SD1 function */ + DA850_MMCSD1_DAT_0, + DA850_MMCSD1_DAT_1, + DA850_MMCSD1_DAT_2, + DA850_MMCSD1_DAT_3, + DA850_MMCSD1_CLK, + DA850_MMCSD1_CMD, + /* EMIF2.5/EMIFA function */ DA850_EMA_D_7, DA850_EMA_D_6, @@ -916,6 +924,8 @@ enum davinci_da850_index { DA850_GPIO3_13, DA850_GPIO4_0, DA850_GPIO4_1, + DA850_GPIO6_9, + DA850_GPIO6_10, DA850_GPIO6_13, DA850_RTC_ALARM, }; diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 1b28fdd892a..409bb869c7c 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -12,6 +12,7 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> @@ -27,9 +28,9 @@ #include <mach/psc.h> #include <mach/cp_intc.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/hardware.h> #include <mach/tnetv107x.h> +#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot index 23212604493..83cf07c38ad 100644 --- a/arch/arm/mach-ebsa110/Makefile.boot +++ b/arch/arm/mach-ebsa110/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000400 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h index f68daa632af..44679db672f 100644 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ b/arch/arm/mach-ebsa110/include/mach/io.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - u8 __inb8(unsigned int port); void __outb8(u8 val, unsigned int port); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 3a08b18f643..97a249395b5 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -182,6 +182,13 @@ config MACH_TS72XX Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. +config MACH_VISION_EP9307 + bool "Support Vision Engraving Systems EP9307 SoM" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Vision Engraving Systems EP9307 SoM. + choice prompt "Select a UART for early kernel messages" diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 3cedcf2d39e..574209d9e24 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_SIM_ONE) += simone.o obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o +obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index 0ad33f15c62..d3113a71cb4 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,14 +1,14 @@ - zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000 params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 - zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 - zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000 + zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000 params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 - zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000 + zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000 params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 - zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000 params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index c60f081e930..94c78bc6627 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -38,6 +38,7 @@ #include <mach/fb.h> #include <mach/ep93xx_keypad.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 257175edc57..70ef8c527d2 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -159,6 +160,11 @@ static void __init edb93xx_register_spi(void) /************************************************************************* * EDB93xx I2S *************************************************************************/ +static struct platform_device edb93xx_audio_device = { + .name = "edb93xx-audio", + .id = -1, +}; + static int __init edb93xx_has_audio(void) { return (machine_is_edb9301() || machine_is_edb9302() || @@ -170,6 +176,7 @@ static void __init edb93xx_register_i2s(void) { if (edb93xx_has_audio()) { ep93xx_register_i2s(); + platform_device_register(&edb93xx_audio_device); } } diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h new file mode 100644 index 00000000000..8aff2ea3587 --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -0,0 +1,100 @@ +/* Include file for the EP93XX GPIO controller machine specifics */ + +#ifndef __GPIO_EP93XX_H +#define __GPIO_EP93XX_H + +/* GPIO port A. */ +#define EP93XX_GPIO_LINE_A(x) ((x) + 0) +#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) +#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) +#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) +#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) +#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) +#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) +#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) +#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) + +/* GPIO port B. */ +#define EP93XX_GPIO_LINE_B(x) ((x) + 8) +#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) +#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) +#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) +#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) +#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) +#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) +#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) +#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) + +/* GPIO port C. */ +#define EP93XX_GPIO_LINE_C(x) ((x) + 40) +#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) +#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) +#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) +#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) +#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) +#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) +#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) +#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) + +/* GPIO port D. */ +#define EP93XX_GPIO_LINE_D(x) ((x) + 24) +#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) +#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) +#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) +#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) +#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) +#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) +#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) +#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) + +/* GPIO port E. */ +#define EP93XX_GPIO_LINE_E(x) ((x) + 32) +#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) +#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) +#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) +#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) +#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) +#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) +#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) +#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) + +/* GPIO port F. */ +#define EP93XX_GPIO_LINE_F(x) ((x) + 16) +#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) +#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) +#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) +#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) +#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) +#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) +#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) +#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) + +/* GPIO port G. */ +#define EP93XX_GPIO_LINE_G(x) ((x) + 48) +#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) +#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) +#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) +#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) +#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) +#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) +#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) +#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) + +/* GPIO port H. */ +#define EP93XX_GPIO_LINE_H(x) ((x) + 56) +#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) +#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) +#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) +#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) +#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) +#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) +#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) +#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) + +/* maximum value for gpio line identifiers */ +#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) + +/* maximum value for irq capable line identifiers */ +#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) + +#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index c57152c231f..40a8c178f10 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -1,120 +1 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -#define gpio_to_irq(gpio) \ - (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) - -#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) - -#endif +/* empty */ diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 238bc603da8..52e090dc9d2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,12 +18,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,6 +53,17 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = { }, }; +static struct platform_device simone_audio_device = { + .name = "simone-audio", + .id = -1, +}; + +static void __init simone_register_audio(void) +{ + ep93xx_register_ac97(); + platform_device_register(&simone_audio_device); +} + static void __init simone_init_machine(void) { ep93xx_init_devices(); @@ -61,7 +72,7 @@ static void __init simone_init_machine(void) ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); - ep93xx_register_ac97(); + simone_register_audio(); } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 3bdf3a2e5ad..8121e3aedc0 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/fb.h> @@ -30,6 +29,7 @@ #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -150,6 +150,17 @@ static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { .bpp = 16, }; +static struct platform_device snappercl15_audio_device = { + .name = "snappercl15-audio", + .id = -1, +}; + +static void __init snappercl15_register_audio(void) +{ + ep93xx_register_i2s(); + platform_device_register(&snappercl15_audio_device); +} + static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); @@ -157,7 +168,7 @@ static void __init snappercl15_init_machine(void) ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); - ep93xx_register_i2s(); + snappercl15_register_audio(); platform_device_register(&snappercl15_nand_device); } diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c new file mode 100644 index 00000000000..d96e4dbec6a --- /dev/null +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -0,0 +1,364 @@ +/* + * arch/arm/mach-ep93xx/vision_ep9307.c + * Vision Engraving Systems EP9307 SoM support. + * + * Copyright (C) 2008-2011 Vision Engraving Systems + * H Hartley Sweeten <hsweeten@visionengravers.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/mtd/partitions.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> + +#include <mach/hardware.h> +#include <mach/fb.h> +#include <mach/ep93xx_spi.h> + +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * Static I/O mappings for the FPGA + *************************************************************************/ +#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE +#define VISION_VIRT_BASE 0xfebff000 + +static struct map_desc vision_io_desc[] __initdata = { + { + .virtual = VISION_VIRT_BASE, + .pfn = __phys_to_pfn(VISION_PHYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init vision_map_io(void) +{ + ep93xx_map_io(); + + iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); +} + +/************************************************************************* + * Ethernet + *************************************************************************/ +static struct ep93xx_eth_data vision_eth_data __initdata = { + .phy_id = 1, +}; + +/************************************************************************* + * Framebuffer + *************************************************************************/ +#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 + +static int vision_lcd_setup(struct platform_device *pdev) +{ + int err; + + err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, + dev_name(&pdev->dev)); + if (err) + return err; + + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | + EP93XX_SYSCON_DEVCFG_RASONP3 | + EP93XX_SYSCON_DEVCFG_EXVC); + + return 0; +} + +static void vision_lcd_teardown(struct platform_device *pdev) +{ + gpio_free(VISION_LCD_ENABLE); +} + +static void vision_lcd_blank(int blank_mode, struct fb_info *info) +{ + if (blank_mode) + gpio_set_value(VISION_LCD_ENABLE, 0); + else + gpio_set_value(VISION_LCD_ENABLE, 1); +} + +static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, + .setup = vision_lcd_setup, + .teardown = vision_lcd_teardown, + .blank = vision_lcd_blank, +}; + + +/************************************************************************* + * GPIO Expanders + *************************************************************************/ +#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) +#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) +#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) +#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) + +static struct pca953x_platform_data pca953x_74_gpio_data = { + .gpio_base = PCA9539_74_GPIO_BASE, + .irq_base = EP93XX_BOARD_IRQ(0), +}; + +static struct pca953x_platform_data pca953x_75_gpio_data = { + .gpio_base = PCA9539_75_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_76_gpio_data = { + .gpio_base = PCA9539_76_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_77_gpio_data = { + .gpio_base = PCA9539_77_GPIO_BASE, + .irq_base = -1, +}; + +/************************************************************************* + * I2C Bus + *************************************************************************/ +static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .scl_pin = EP93XX_GPIO_LINE_EECLK, +}; + +static struct i2c_board_info vision_i2c_info[] __initdata = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + .irq = IRQ_EP93XX_EXT1, + }, { + I2C_BOARD_INFO("pca9539", 0x74), + .platform_data = &pca953x_74_gpio_data, + .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), + }, { + I2C_BOARD_INFO("pca9539", 0x75), + .platform_data = &pca953x_75_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x76), + .platform_data = &pca953x_76_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x77), + .platform_data = &pca953x_77_gpio_data, + }, +}; + +/************************************************************************* + * SPI Flash + *************************************************************************/ +#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7 + +static struct mtd_partition vision_spi_flash_partitions[] = { + { + .name = "SPI bootstrap", + .offset = 0, + .size = SZ_4K, + }, { + .name = "Bootstrap config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4K, + }, { + .name = "System config", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data vision_spi_flash_data = { + .name = "SPI Flash", + .parts = vision_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), +}; + +static int vision_spi_flash_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_flash_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_FLASH_CS); +} + +static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_FLASH_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_flash_hw = { + .setup = vision_spi_flash_hw_setup, + .cleanup = vision_spi_flash_hw_cleanup, + .cs_control = vision_spi_flash_hw_cs_control, +}; + +/************************************************************************* + * SPI SD/MMC host + *************************************************************************/ +#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2) +#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0) +#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15 + +static struct gpio vision_spi_mmc_gpios[] = { + { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" }, + { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" }, +}; + +static int vision_spi_mmc_init(struct device *pdev, + irqreturn_t (*func)(int, void *), void *pdata) +{ + int err; + + err = gpio_request_array(vision_spi_mmc_gpios, + ARRAY_SIZE(vision_spi_mmc_gpios)); + if (err) + return err; + + err = gpio_set_debounce(VISION_SPI_MMC_CD, 1); + if (err) + goto exit_err; + + err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func, + IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata); + if (err) + goto exit_err; + + return 0; + +exit_err: + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); + return err; + +} + +static void vision_spi_mmc_exit(struct device *pdev, void *pdata) +{ + free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata); + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); +} + +static int vision_spi_mmc_get_ro(struct device *pdev) +{ + return !!gpio_get_value(VISION_SPI_MMC_WP); +} + +static int vision_spi_mmc_get_cd(struct device *pdev) +{ + return !gpio_get_value(VISION_SPI_MMC_CD); +} + +static struct mmc_spi_platform_data vision_spi_mmc_data = { + .init = vision_spi_mmc_init, + .exit = vision_spi_mmc_exit, + .get_ro = vision_spi_mmc_get_ro, + .get_cd = vision_spi_mmc_get_cd, + .detect_delay = 100, + .powerup_msecs = 100, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static int vision_spi_mmc_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_mmc_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_MMC_CS); +} + +static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_MMC_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = { + .setup = vision_spi_mmc_hw_setup, + .cleanup = vision_spi_mmc_hw_cleanup, + .cs_control = vision_spi_mmc_hw_cs_control, +}; + +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info vision_spi_board_info[] __initdata = { + { + .modalias = "sst25l", + .platform_data = &vision_spi_flash_data, + .controller_data = &vision_spi_flash_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, { + .modalias = "mmc_spi", + .platform_data = &vision_spi_mmc_data, + .controller_data = &vision_spi_mmc_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_3, + }, +}; + +static struct ep93xx_spi_info vision_spi_master __initdata = { + .num_chipselect = ARRAY_SIZE(vision_spi_board_info), +}; + +/************************************************************************* + * Machine Initialization + *************************************************************************/ +static void __init vision_init_machine(void) +{ + ep93xx_init_devices(); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); + ep93xx_register_eth(&vision_eth_data, 1); + ep93xx_register_fb(&ep93xxfb_info); + ep93xx_register_pwm(1, 0); + + /* + * Request the gpio expander's interrupt gpio line now to prevent + * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). + */ + if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, + "pca9539:74")) + pr_warn("cannot request interrupt gpio for pca9539:74\n"); + + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ARRAY_SIZE(vision_i2c_info)); + ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, + ARRAY_SIZE(vision_spi_board_info)); +} + +MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .atag_offset = 0x100, + .map_io = vision_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = vision_init_machine, +MACHINE_END diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa1..a6527359803 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -12,9 +12,20 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool select S3C_PL330_DMA + select ARM_CPU_SUSPEND if PM help Enable EXYNOS4210 CPU support +config SOC_EXYNOS4212 + bool + help + Enable EXYNOS4212 SoC support + +config SOC_EXYNOS4412 + bool + help + Enable EXYNOS4412 SoC support + config EXYNOS4_MCT bool default y @@ -111,24 +122,11 @@ config EXYNOS4_SETUP_USB_PHY menu "EXYNOS4 Machines" +comment "EXYNOS4210 Boards" + config MACH_SMDKC210 bool "SMDKC210" - select CPU_EXYNOS4210 - select S5P_DEV_FIMD0 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_BACKLIGHT - select EXYNOS4_DEV_PD - select EXYNOS4_DEV_SYSMMU - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_SDHCI + select MACH_SMDKV310 help Machine support for Samsung SMDKC210 @@ -218,6 +216,48 @@ config MACH_NURI help Machine support for Samsung Mobile NURI Board. +config MACH_ORIGEN + bool "ORIGEN" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC2 + select EXYNOS4_SETUP_SDHCI + help + Machine support for ORIGEN based on Samsung EXYNOS4210 + +comment "EXYNOS4212 Boards" + +config MACH_SMDK4212 + bool "SMDK4212" + select SOC_EXYNOS4212 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C3 + select S3C_DEV_I2C7 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDK4212 + +comment "EXYNOS4412 Boards" + +config MACH_SMDK4412 + bool "SMDK4412" + select SOC_EXYNOS4412 + select MACH_SMDK4212 + help + Machine support for Samsung SMDK4412 + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index b7fe1d7b0b1..c9b2e1f97e4 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -12,8 +12,10 @@ obj- := # Core support for EXYNOS4 system -obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o +obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o @@ -25,11 +27,15 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o + +obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o +obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o # device support diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956ffb43..b9862e22bf1 100644 --- a/arch/arm/mach-exynos4/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x40008000 + zreladdr-y += 0x40008000 params_phys-y := 0x40000100 diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c new file mode 100644 index 00000000000..b9d5ef670eb --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4210.c @@ -0,0 +1,139 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4210_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), +}; + +static struct clksrc_clk *sysclks[] = { + /* nothing here yet */ +}; + +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, +}; + +static struct clk init_clocks_off[] = { + { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "sata", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4210_clock_suspend(void) +{ + s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); + + return 0; +} + +static void exynos4210_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); +} + +#else +#define exynos4210_clock_suspend NULL +#define exynos4210_clock_resume NULL +#endif + +struct syscore_ops exynos4210_clock_syscore_ops = { + .suspend = exynos4210_clock_suspend, + .resume = exynos4210_clock_resume, +}; + +void __init exynos4210_register_clocks(void) +{ + int ptr; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; + clk_mout_mpll.reg_src.shift = 8; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4210_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c new file mode 100644 index 00000000000..77d5decb34f --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4212.c @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4212 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4212_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), +}; + +static struct clk *clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clk_src_mpll_user = { + .sources = clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), +}; + +static struct clksrc_clk clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &clk_src_mpll_user, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk *sysclks[] = { + &clk_mout_mpll_user, +}; + +static struct clksrc_clk clksrcs[] = { + /* nothing here yet */ +}; + +static struct clk init_clocks_off[] = { + /* nothing here yet */ +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4212_clock_suspend(void) +{ + s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); + + return 0; +} + +static void exynos4212_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); +} + +#else +#define exynos4212_clock_suspend NULL +#define exynos4212_clock_resume NULL +#endif + +struct syscore_ops exynos4212_clock_syscore_ops = { + .suspend = exynos4212_clock_suspend, + .resume = exynos4212_clock_resume, +}; + +void __init exynos4212_register_clocks(void) +{ + int ptr; + + /* usbphy1 is removed */ + clkset_group_list[4] = NULL; + + /* mout_mpll_user is used */ + clkset_group_list[6] = &clk_mout_mpll_user.clk; + clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; + clk_mout_mpll.reg_src.shift = 12; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4212_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 86964d2e9e1..0d59be3fa1f 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -20,26 +21,93 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/sysmmu.h> - -static struct clk clk_sclk_hdmi27m = { +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), +}; + +struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, }; -static struct clk clk_sclk_hdmiphy = { +struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", }; -static struct clk clk_sclk_usbphy0 = { +struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", .rate = 27000000, }; -static struct clk clk_sclk_usbphy1 = { +struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; @@ -58,12 +126,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); -} - -static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } @@ -103,12 +166,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } @@ -133,7 +196,7 @@ static struct clksrc_clk clk_mout_apll = { .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, }; -static struct clksrc_clk clk_sclk_apll = { +struct clksrc_clk clk_sclk_apll = { .clk = { .name = "sclk_apll", .parent = &clk_mout_apll.clk, @@ -141,7 +204,7 @@ static struct clksrc_clk clk_sclk_apll = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, }; -static struct clksrc_clk clk_mout_epll = { +struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", }, @@ -149,12 +212,13 @@ static struct clksrc_clk clk_mout_epll = { .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, }; -static struct clksrc_clk clk_mout_mpll = { +struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", }, .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, + + /* reg_src will be added in each SoCs' clock */ }; static struct clk *clkset_moutcore_list[] = { @@ -224,12 +288,12 @@ static struct clksrc_clk clk_periphclk = { /* Core list of CMU_CORE side */ -static struct clk *clkset_corebus_list[] = { +struct clk *clkset_corebus_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_mout_corebus = { +struct clksrc_sources clkset_mout_corebus = { .sources = clkset_corebus_list, .nr_sources = ARRAY_SIZE(clkset_corebus_list), }; @@ -284,12 +348,12 @@ static struct clksrc_clk clk_pclk_acp = { /* Core list of CMU_TOP side */ -static struct clk *clkset_aclk_top_list[] = { +struct clk *clkset_aclk_top_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk = { +struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -321,7 +385,7 @@ static struct clksrc_clk clk_aclk_160 = { .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_clk clk_aclk_133 = { +struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", }, @@ -360,7 +424,7 @@ static struct clksrc_sources clkset_sclk_vpll = { .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), }; -static struct clksrc_clk clk_sclk_vpll = { +struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", }, @@ -410,16 +474,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sataphy", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { .name = "hsmmc", .devname = "s3c-sdhci.0", .parent = &clk_aclk_133.clk, @@ -449,11 +503,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { - .name = "sata", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 10), - }, { .name = "pdma", .devname = "s3c-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, @@ -673,7 +722,7 @@ static struct clk init_clocks[] = { } }; -static struct clk *clkset_group_list[] = { +struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, @@ -685,7 +734,7 @@ static struct clk *clkset_group_list[] = { [8] = &clk_sclk_vpll.clk, }; -static struct clksrc_sources clkset_group = { +struct clksrc_sources clkset_group = { .sources = clkset_group_list, .nr_sources = ARRAY_SIZE(clkset_group_list), }; @@ -967,25 +1016,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_sata", - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .enable = exynos4_clksrc_mask_peril1_ctrl, @@ -1114,7 +1144,13 @@ static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); + else + return 0; } static struct clk_ops exynos4_fout_apll_ops = { @@ -1124,10 +1160,10 @@ static struct clk_ops exynos4_fout_apll_ops = { void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; @@ -1151,14 +1187,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650c); + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1)); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1)); + } else { + /* nothing */ + } clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; @@ -1193,6 +1244,28 @@ static struct clk *clks[] __initdata = { /* Nothing here yet */ }; +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, +}; + void __init exynos4_register_clocks(void) { int ptr; @@ -1208,5 +1281,6 @@ void __init exynos4_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + register_syscore_ops(&exynos4_clock_syscore_ops); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 746d6fc6d39..a348434f17b 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -32,6 +32,8 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> +unsigned int gic_bank_offset __read_mostly; + extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); @@ -44,11 +46,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -121,6 +118,24 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; +static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + static void exynos4_idle(void) { if (!need_resched()) @@ -143,6 +158,11 @@ void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -170,24 +190,37 @@ void __init exynos4_init_clocks(int xtal) s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); + + if (soc_is_exynos4210()) + exynos4210_register_clocks(); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + exynos4212_register_clocks(); + exynos4_register_clocks(); exynos4_setup_clocks(); } -static void exynos4_gic_irq_eoi(struct irq_data *d) +static void exynos4_gic_irq_fix_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); gic_data->cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); + + gic_data->dist_base = S5P_VA_GIC_DIST + + (gic_bank_offset * smp_processor_id()); } void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; + gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; + + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { @@ -223,7 +256,11 @@ static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + if (soc_is_exynos4210()) + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); /* L2X0 Prefetch Control */ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index 7490789784c..da70e7e3993 100644 --- a/arch/arm/mach-exynos4/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -75,7 +75,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) : : "memory", "cc"); - if (pen_release == cpu) { + if (pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index 006a4f4c65c..f5e9fd8e37b 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -17,12 +17,25 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr + mov \tmp, #0 + + mrc p15, 0, \base, c0, c0, 5 + and \base, \base, #3 + cmp \base, #0 + beq 1f + + ldr \tmp, =gic_bank_offset + ldr \tmp, [\tmp] + cmp \base, #1 + beq 1f + + cmp \base, #2 + addeq \tmp, \tmp, \tmp + addne \tmp, \tmp, \tmp, LSL #1 + +1: ldr \base, =gic_cpu_base_addr ldr \base, [\base] - mrc p15, 0, \tmp, c0, c0, 5 - and \tmp, \tmp, #3 - cmp \tmp, #1 - addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET + add \base, \base, \tmp .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h new file mode 100644 index 00000000000..a07fcbf5525 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h @@ -0,0 +1,43 @@ +/* + * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clk clk_sclk_hdmi27m; +extern struct clk clk_sclk_usbphy0; +extern struct clk clk_sclk_usbphy1; +extern struct clk clk_sclk_hdmiphy; + +extern struct clksrc_clk clk_sclk_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_aclk_133; +extern struct clksrc_clk clk_mout_epll; +extern struct clksrc_clk clk_sclk_vpll; + +extern struct clk *clkset_corebus_list[]; +extern struct clksrc_sources clkset_mout_corebus; + +extern struct clk *clkset_aclk_top_list[]; +extern struct clksrc_sources clkset_aclk; + +extern struct clk *clkset_group_list[]; +extern struct clksrc_sources clkset_group; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index be9266b10fd..80523ca9bb4 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ @@ -151,6 +146,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index f8952f8f375..2d3f6bcd9bc 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,6 +19,8 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_MCT_LOCALTIMER IRQ_PPI(12) + /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index d32296dc65e..9f97eb8499e 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -23,7 +23,8 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM 0x02020000 +#define EXYNOS4_PA_SYSRAM0 0x02025000 +#define EXYNOS4_PA_SYSRAM1 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 @@ -61,7 +62,6 @@ #define EXYNOS4_PA_GIC_CPU 0x10480000 #define EXYNOS4_PA_GIC_DIST 0x10490000 -#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_TWD 0x10500600 diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index d493fdb422f..6c37ebe9482 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ +#include <plat/cpu.h> #include <mach/map.h> #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) @@ -41,12 +42,20 @@ #define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) #define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) #define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) @@ -54,7 +63,6 @@ #define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) #define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) @@ -68,16 +76,6 @@ #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) #define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) #define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) @@ -85,13 +83,20 @@ #define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) #define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) #define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C930) : \ + S5P_CLKREG(0x04930)) +#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C960) : \ + S5P_CLKREG(0x08960)) +#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) #define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) #define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) @@ -102,11 +107,17 @@ #define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14004) : \ + S5P_CLKREG(0x10008)) #define S5P_APLL_CON0 S5P_CLKREG(0x14100) #define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) -#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) +#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14108) : \ + S5P_CLKREG(0x10108)) +#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x1410C) : \ + S5P_CLKREG(0x1010C)) #define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) @@ -183,6 +194,13 @@ #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +/* Only for EXYNOS4210 */ + +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) + /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h index ca9c8434b02..80dd02ad6d6 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-mct.h +++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h @@ -31,8 +31,9 @@ #define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) #define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) -#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400) +#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) +#define EXYNOS4_MCT_L_MASK (0xffffff00) #define MCT_L_TCNTB_OFFSET (0x00) #define MCT_L_ICNTB_OFFSET (0x08) diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c new file mode 100644 index 00000000000..b5f6f38557c --- /dev/null +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -0,0 +1,108 @@ +/* linux/arch/arm/mach-exynos4/mach-origen.c + * + * Copyright (c) 2011 Insignal Co., Ltd. + * http://www.insignal.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> +#include <plat/iic.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct platform_device *origen_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static void __init origen_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); +} + +static void __init origen_machine_init(void) +{ + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); +} + +MACHINE_START(ORIGEN, "ORIGEN") + /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = origen_map_io, + .init_machine = origen_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c new file mode 100644 index 00000000000..fcf2e0e23d5 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdk4x12.c @@ -0,0 +1,302 @@ +/* + * linux/arch/arm/mach-exynos4/mach-smdk4x12.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/mfd/max8997.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/machine.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/backlight.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> +#include <plat/keypad.h> +#include <plat/regs-serial.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply max8997_buck1 = + REGULATOR_SUPPLY("vdd_arm", NULL); + +static struct regulator_consumer_supply max8997_buck2 = + REGULATOR_SUPPLY("vdd_int", NULL); + +static struct regulator_consumer_supply max8997_buck3 = + REGULATOR_SUPPLY("vdd_g3d", NULL); + +static struct regulator_init_data max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_SMDK4X12", + .min_uV = 925000, + .max_uV = 1350000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck1, +}; + +static struct regulator_init_data max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck2, +}; + +static struct regulator_init_data max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck3, +}; + +static struct max8997_regulator_data smdk4x12_max8997_regulators[] = { + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, +}; + +static struct max8997_platform_data smdk4x12_max8997_pdata = { + .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators), + .regulators = smdk4x12_max8997_regulators, + + .buck1_voltage[0] = 1100000, /* 1.1V */ + .buck1_voltage[1] = 1100000, /* 1.1V */ + .buck1_voltage[2] = 1100000, /* 1.1V */ + .buck1_voltage[3] = 1100000, /* 1.1V */ + .buck1_voltage[4] = 1100000, /* 1.1V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1100000, /* 1.1V */ + .buck5_voltage[1] = 1100000, /* 1.1V */ + .buck5_voltage[2] = 1100000, /* 1.1V */ + .buck5_voltage[3] = 1100000, /* 1.1V */ + .buck5_voltage[4] = 1100000, /* 1.1V */ + .buck5_voltage[5] = 1100000, /* 1.1V */ + .buck5_voltage[6] = 1100000, /* 1.1V */ + .buck5_voltage[7] = 1100000, /* 1.1V */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = { + { + I2C_BOARD_INFO("max8997", 0x66), + .platform_data = &smdk4x12_max8997_pdata, + } +}; + +static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8994", 0x1a), } +}; + +static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { + /* nothing here yet */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { + /* nothing here yet */ +}; + +static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk4x12_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + +static uint32_t smdk4x12_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), + KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) +}; + +static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { + .keymap = smdk4x12_keymap, + .keymap_size = ARRAY_SIZE(smdk4x12_keymap), +}; + +static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { + .keymap_data = &smdk4x12_keymap_data, + .rows = 2, + .cols = 5, +}; + +static struct platform_device *smdk4x12_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c3, + &s3c_device_i2c7, + &s3c_device_rtc, + &s3c_device_wdt, + &samsung_device_keypad, +}; + +static void __init smdk4x12_map_io(void) +{ + clk_xusbxti.rate = 24000000; + + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(clk_xusbxti.rate); + s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); +} + +static void __init smdk4x12_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, smdk4x12_i2c_devs0, + ARRAY_SIZE(smdk4x12_i2c_devs0)); + + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, smdk4x12_i2c_devs1, + ARRAY_SIZE(smdk4x12_i2c_devs1)); + + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, smdk4x12_i2c_devs3, + ARRAY_SIZE(smdk4x12_i2c_devs3)); + + s3c_i2c7_set_platdata(NULL); + i2c_register_board_info(7, smdk4x12_i2c_devs7, + ARRAY_SIZE(smdk4x12_i2c_devs7)); + + samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); + + samsung_keypad_set_platdata(&smdk4x12_keypad_data); + + s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); +} + +MACHINE_START(SMDK4212, "SMDK4212") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END + +MACHINE_START(SMDK4412, "SMDK4412") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c deleted file mode 100644 index b24ddd7ad8f..00000000000 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ /dev/null @@ -1,309 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-smdkc210.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/lcd.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/smsc911x.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/pwm_backlight.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> - -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/regs-fb-v4.h> -#include <plat/exynos4.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/sdhci.h> -#include <plat/iic.h> -#include <plat/pd.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> - -#include <mach/map.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - /* fire nRESET on power up */ - gpio_request(EXYNOS4_GPX0(6), "GPX0"); - - gpio_direction_output(EXYNOS4_GPX0(6), 1); - mdelay(100); - - gpio_set_value(EXYNOS4_GPX0(6), 0); - mdelay(10); - - gpio_set_value(EXYNOS4_GPX0(6), 1); - mdelay(10); - - gpio_free(EXYNOS4_GPX0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - } -} - -static struct plat_lcd_data smdkc210_lcd_lte480wv_data = { - .set_power = lcd_lte480wv_set_power, -}; - -static struct platform_device smdkc210_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &smdkc210_lcd_lte480wv_data, -}; - -static struct s3c_fb_pd_win smdkc210_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 24, -}; - -static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = { - .win[0] = &smdkc210_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; - -static struct resource smdkc210_smsc911x_resources[] = { - [0] = { - .start = EXYNOS4_PA_SROM_BANK(1), - .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkc210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), - .resource = smdkc210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -static struct platform_device *smdkc210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s3c_device_rtc, - &s3c_device_wdt, - &exynos4_device_ac97, - &exynos4_device_i2s0, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_GPS], - &exynos4_device_sysmmu, - &samsung_asoc_dma, - &s5p_device_fimd0, - &smdkc210_lcd_lte480wv, - &smdkc210_smsc911x, -}; - -static void __init smdkc210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkc210_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -static void __init smdkc210_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); -} - -static void __init smdkc210_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkc210_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); - - samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data); - s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata); - - platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); -} - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = exynos4_init_irq, - .map_io = smdkc210_map_io, - .init_machine = smdkc210_machine_init, - .timer = &exynos4_timer, -MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index d90fcddbee1..2c1a076c6a7 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -9,7 +9,9 @@ */ #include <linux/serial_core.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/lcd.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> @@ -21,11 +23,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> @@ -112,6 +117,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + /* fire nRESET on power up */ + gpio_request(EXYNOS4_GPX0(6), "GPX0"); + + gpio_direction_output(EXYNOS4_GPX0(6), 1); + mdelay(100); + + gpio_set_value(EXYNOS4_GPX0(6), 0); + mdelay(10); + + gpio_set_value(EXYNOS4_GPX0(6), 1); + mdelay(10); + + gpio_free(EXYNOS4_GPX0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + } +} + +static struct plat_lcd_data smdkv310_lcd_lte480wv_data = { + .set_power = lcd_lte480wv_set_power, +}; + +static struct platform_device smdkv310_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &smdkv310_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkv310_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { + .win[0] = &smdkv310_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct resource smdkv310_smsc911x_resources[] = { [0] = { .start = EXYNOS4_PA_SROM_BANK(1), @@ -188,6 +254,8 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_sysmmu, &samsung_asoc_dma, &samsung_asoc_idma, + &s5p_device_fimd0, + &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, }; @@ -248,6 +316,7 @@ static void __init smdkv310_machine_init(void) samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } @@ -261,3 +330,12 @@ MACHINE_START(SMDKV310, "SMDKV310") .init_machine = smdkv310_machine_init, .timer = &exynos4_timer, MACHINE_END + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdkv310_map_io, + .init_machine = smdkv310_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 582b874aab0..f191608b28d 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -20,19 +20,31 @@ #include <linux/delay.h> #include <linux/percpu.h> +#include <asm/hardware/gic.h> + +#include <plat/cpu.h> + #include <mach/map.h> +#include <mach/irqs.h> #include <mach/regs-mct.h> #include <asm/mach/time.h> +enum { + MCT_INT_SPI, + MCT_INT_PPI +}; + static unsigned long clk_cnt_per_tick; static unsigned long clk_rate; +static unsigned int mct_int_type; struct mct_clock_event_device { struct clock_event_device *evt; void __iomem *base; + char name[10]; }; -struct mct_clock_event_device mct_tick[2]; +struct mct_clock_event_device mct_tick[NR_CPUS]; static void exynos4_mct_write(unsigned int value, void *addr) { @@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr) __raw_writel(value, addr); - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 16; /* G_TCON write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_L: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 0; /* G_COMP0_L write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_U: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 1; /* G_COMP0_U write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 2; /* G_COMP0_ADD_INCR write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_L: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 0; /* G_CNT_L write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_U: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 1; /* G_CNT_U write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L0_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L1_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L0_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L1_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L0_ICNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L1_ICNTB write status */ - break; - default: - return; + if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { + u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; + switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { + case (u32) MCT_L_TCON_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L_TCON write status */ + break; + case (u32) MCT_L_ICNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L_ICNTB write status */ + break; + case (u32) MCT_L_TCNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L_TCNTB write status */ + break; + default: + return; + } + } else { + switch ((u32) addr) { + case (u32) EXYNOS4_MCT_G_TCON: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 16; /* G_TCON write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_L: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 0; /* G_COMP0_L write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_U: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 1; /* G_COMP0_U write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_L: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 0; /* G_CNT_L write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_U: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 1; /* G_CNT_U write status */ + break; + default: + return; + } } /* Wait maximum 1 ms until written values are applied */ @@ -321,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode, } } -static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) { - struct mct_clock_event_device *mevt = dev_id; struct clock_event_device *evt = mevt->evt; /* @@ -335,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + return 1; + } else { + return 0; + } +} + +static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +{ + struct mct_clock_event_device *mevt = dev_id; + struct clock_event_device *evt = mevt->evt; + + exynos4_mct_tick_clear(mevt); evt->event_handler(evt); @@ -360,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) mct_tick[cpu].evt = evt; - if (cpu == 0) { - mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE; - evt->name = "mct_tick0"; - } else { - mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE; - evt->name = "mct_tick1"; - } + mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu); + sprintf(mct_tick[cpu].name, "mct_tick%d", cpu); + evt->name = mct_tick[cpu].name; evt->cpumask = cpumask_of(cpu); evt->set_next_event = exynos4_tick_set_next_event; evt->set_mode = exynos4_tick_set_mode; @@ -384,15 +400,19 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET); - if (cpu == 0) { - mct_tick0_event_irq.dev_id = &mct_tick[cpu]; - evt->irq = IRQ_MCT_L0; - setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + if (mct_int_type == MCT_INT_SPI) { + if (cpu == 0) { + mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L0; + setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + } else { + mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L1; + setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + } } else { - mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - evt->irq = IRQ_MCT_L1; - setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); - irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + gic_enable_ppi(IRQ_MCT_LOCALTIMER); } } @@ -422,6 +442,11 @@ static void __init exynos4_timer_resources(void) static void __init exynos4_timer_init(void) { + if (soc_is_exynos4210()) + mct_int_type = MCT_INT_SPI; + else + mct_int_type = MCT_INT_PPI; + exynos4_timer_resources(); exynos4_clocksource_init(); exynos4_clockevent_init(); diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 0c90896ad9a..05595407e9f 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -30,9 +30,13 @@ #include <mach/regs-clock.h> #include <mach/regs-pmu.h> +#include <plat/cpu.h> + +extern unsigned int gic_bank_offset; extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG S5P_VA_SYSRAM +#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM5 : S5P_VA_SYSRAM) /* * control for which core is the next to come out of the secondary @@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos4_gic_secondary_init(void) { void __iomem *dist_base = S5P_VA_GIC_DIST + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); void __iomem *cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); int i; /* @@ -128,7 +132,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(cpu); + write_pen_release(cpu_logical_map(cpu)); if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { __raw_writel(S5P_CORE_LOCAL_PWR_EN, @@ -216,5 +220,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index bc6ca9482de..62e4f436300 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, @@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4210_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, +}; + static struct sleep_save exynos4_epll_save[] = { SAVE_ITEM(S5P_EPLL_CON0), SAVE_ITEM(S5P_EPLL_CON1), @@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = { }; static struct sleep_save exynos4_core_save[] = { - /* CMU side */ - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), - /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void) s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + if (soc_is_exynos4210()) + s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc)); + } static int exynos4_pm_add(struct sys_device *sysdev) diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index c8e7afcf14e..f643ef819da 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -4,8 +4,8 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" - select CLKSRC_I8253 select CLKEVT_I8253 + select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA @@ -61,8 +61,8 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" - select CLKSRC_I8253 select CLKEVT_I8253 + select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot index c7e75acfe6c..ff0a4b5b0a8 100644 --- a/arch/arm/mach-footbridge/Makefile.boot +++ b/arch/arm/mach-footbridge/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index a3da5d1106c..d5f17854092 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -76,8 +76,7 @@ __initcall(cats_hw_init); * hard reboots fail on early boards. */ static void __init -fixup_cats(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) { screen_info.orig_video_lines = 25; screen_info.orig_video_points = 16; diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index 15d54981674..e3d6ccac216 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -93,7 +93,7 @@ #define CPLD_FLASH_WR_ENABLE 1 #ifndef __ASSEMBLY__ -extern spinlock_t nw_gpio_lock; +extern raw_spinlock_t nw_gpio_lock; extern void nw_gpio_modify_op(unsigned int mask, unsigned int set); extern void nw_gpio_modify_io(unsigned int mask, unsigned int in); extern unsigned int nw_gpio_read(void); diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index 32e4cc397c2..15a70396c27 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -23,8 +23,6 @@ #define PCIO_SIZE 0x00100000 #define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) -#define IO_SPACE_LIMIT 0xffff - /* * Translation of various region addresses to virtual addresses */ diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index d8c1c922e24..0d3846f3b60 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -68,7 +68,7 @@ static inline void wb977_ww(int reg, int val) /* * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE */ -DEFINE_SPINLOCK(nw_gpio_lock); +DEFINE_RAW_SPINLOCK(nw_gpio_lock); EXPORT_SYMBOL(nw_gpio_lock); static unsigned int current_gpio_op; @@ -327,9 +327,9 @@ static inline void wb977_init_gpio(void) /* * Set Group1/Group2 outputs */ - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } /* @@ -390,9 +390,9 @@ static void __init cpld_init(void) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static unsigned char rwa_unlock[] __initdata = @@ -616,9 +616,9 @@ static int __init nw_hw_init(void) cpld_init(); rwa010_init(); - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } return 0; } @@ -631,8 +631,7 @@ __initcall(nw_hw_init); * the parameter page. */ static void __init -fixup_netwinder(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) { #ifdef CONFIG_ISAPNP extern int isapnp_disable; diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c index 00269fe0be8..e57102e871f 100644 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ b/arch/arm/mach-footbridge/netwinder-leds.c @@ -31,13 +31,13 @@ static char led_state; static char hw_led_state; -static DEFINE_SPINLOCK(leds_lock); +static DEFINE_RAW_SPINLOCK(leds_lock); static void netwinder_leds_event(led_event_t evt) { unsigned long flags; - spin_lock_irqsave(&leds_lock, flags); + raw_spin_lock_irqsave(&leds_lock, flags); switch (evt) { case led_start: @@ -117,12 +117,12 @@ static void netwinder_leds_event(led_event_t evt) break; } - spin_unlock_irqrestore(&leds_lock, flags); + raw_spin_unlock_irqrestore(&leds_lock, flags); if (led_state & LED_STATE_ENABLED) { - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } } diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot index 22a52c228d9..683f52b20e3 100644 --- a/arch/arm/mach-gemini/Makefile.boot +++ b/arch/arm/mach-gemini/Makefile.boot @@ -1,9 +1,9 @@ ifeq ($(CONFIG_GEMINI_MEM_SWAP),y) - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 else - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 endif diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h index 3bc2c70f298..40a0527bada 100644 --- a/arch/arm/mach-gemini/include/mach/gpio.h +++ b/arch/arm/mach-gemini/include/mach/gpio.h @@ -13,11 +13,6 @@ #define __MACH_GPIO_H__ #include <mach/irqs.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep #define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE) #define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE) diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot index 52984017bd9..d875a7094df 100644 --- a/arch/arm/mach-h720x/Makefile.boot +++ b/arch/arm/mach-h720x/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-$(CONFIG_ARCH_H720X) := 0x40008000 + zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index b4e1bf8757c..e605900ffe1 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -434,6 +434,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index ebee18b3884..dbe61201bcd 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,19 +1,19 @@ -zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 +zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000 params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 -zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 +zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 -zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000 +zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000 params_phys-$(CONFIG_ARCH_MX25) := 0x80000100 initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 -zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 +zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000 params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 -zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000 +zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000 params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cf8f8099ebd..82bd4403b45 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -17,13 +17,12 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/iomux-mx3.h> /* diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 4288e8f97ee..5f37f89e40f 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,6 +36,7 @@ #include <mach/clock.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx3.h> #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 71bb45d09ac..cfa84178eb2 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -241,7 +241,7 @@ static struct regulator_init_data gpo_init = { }; static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("lcd_2v8", NULL), + REGULATOR_SUPPLY("vcore", "spi0.0"), }; static struct regulator_init_data vmmc1_init = { @@ -257,7 +257,7 @@ static struct regulator_init_data vmmc1_init = { }; static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd_lcdio", NULL), + REGULATOR_SUPPLY("vdd", "spi0.0"), }; static struct regulator_init_data vgen_init = { @@ -348,8 +348,6 @@ static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { .reset_gpio = LCD_RESET, .data_enable_gpio = LCD_ENABLE, - .core_supply = "lcd_2v8", - .io_supply = "vdd_lcdio", }; static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index e75f3914784..74dd5731eb6 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index eb3e3fe2028..60f1fda6ce9 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -285,8 +285,6 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = { static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = { .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1), .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS), - .core_supply = "lcd_2v8", - .io_supply = "vdd_lcdio", }; /* @@ -411,7 +409,7 @@ static struct regulator_init_data vmmc2_init = { }; static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("lcd_2v8", NULL), + REGULATOR_SUPPLY("vcore", "spi0.0"), REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; @@ -428,7 +426,7 @@ static struct regulator_init_data vmmc1_init = { }; static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd_lcdio", NULL), + REGULATOR_SUPPLY("vdd", "spi0.0"), }; static struct regulator_init_data vgen_init = { @@ -542,7 +540,7 @@ static const struct mxc_nand_platform_data mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, -#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT +#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT .flash_bbt = 1, #endif }; diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index f0a5282aa01..100bc733ce9 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); + __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); + __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); + __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); } static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 1c4822bb1bc..4ff5faf102a 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); + __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot index c7e75acfe6c..ff0a4b5b0a8 100644 --- a/arch/arm/mach-integrator/Makefile.boot +++ b/arch/arm/mach-integrator/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 77315b99568..4b38e13667a 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -126,6 +126,10 @@ static struct clk_lookup lookups[] = { { /* Bus clock */ .con_id = "apb_pclk", .clk = &dummy_apb_pclk, + }, { + /* Integrator/AP timer frequency */ + .dev_id = "ap_timer", + .clk = &clk24mhz, }, { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, @@ -205,7 +209,7 @@ static struct amba_pl010_data integrator_uart_data = { #define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) -static DEFINE_SPINLOCK(cm_lock); +static DEFINE_RAW_SPINLOCK(cm_lock); /** * cm_control - update the CM_CTRL register. @@ -217,10 +221,10 @@ void cm_control(u32 mask, u32 set) unsigned long flags; u32 val; - spin_lock_irqsave(&cm_lock, flags); + raw_spin_lock_irqsave(&cm_lock, flags); val = readl(CM_CTRL) & ~mask; writel(val | set, CM_CTRL); - spin_unlock_irqrestore(&cm_lock, flags); + raw_spin_unlock_irqrestore(&cm_lock, flags); } EXPORT_SYMBOL(cm_control); diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h index f21bb5493dd..37beed3fa3e 100644 --- a/arch/arm/mach-integrator/include/mach/io.h +++ b/arch/arm/mach-integrator/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - /* * WARNING: this has to mirror definitions in platform.h */ diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 5e6ea5cfea6..ec467baade0 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -13,9 +13,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ /************************************************************************** * * Copyright © ARM Limited 1998. All rights reserved. * ***********************************************************************/ @@ -399,15 +396,6 @@ #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) -#define TICKS_PER_uSEC 24 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_10 (mSEC_1 * 10) - #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index a20fb3f2bc4..a1769f35a86 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/clk.h> #include <video/vga.h> #include <mach/hardware.h> @@ -322,27 +323,16 @@ static void __init ap_init(void) #define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) #define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - static unsigned long timer_reload; -static void integrator_clocksource_init(u32 khz) +static void integrator_clocksource_init(unsigned long inrate) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; + unsigned long rate = inrate; - if (khz >= 1500) { - khz /= 16; + if (rate >= 1500000) { + rate /= 16; ctrl |= TIMER_CTRL_DIV16; } @@ -350,7 +340,7 @@ static void integrator_clocksource_init(u32 khz) writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", - khz * 1000, 200, 16, clocksource_mmio_readl_down); + rate, 200, 16, clocksource_mmio_readl_down); } static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; @@ -374,15 +364,29 @@ static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_devic { u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; - BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT); + /* Disable timer */ + writel(ctrl, clkevt_base + TIMER_CTRL); - if (mode == CLOCK_EVT_MODE_PERIODIC) { - writel(ctrl, clkevt_base + TIMER_CTRL); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Enable the timer and start the periodic tick */ writel(timer_reload, clkevt_base + TIMER_LOAD); ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Leave the timer disabled, .set_next_event will enable it */ + ctrl &= ~TIMER_CTRL_PERIODIC; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + default: + /* Just leave in disabled state */ + break; } - writel(ctrl, clkevt_base + TIMER_CTRL); } static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) @@ -398,12 +402,10 @@ static int clkevt_set_next_event(unsigned long next, struct clock_event_device * static struct clock_event_device integrator_clockevent = { .name = "timer1", - .shift = 34, - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = clkevt_set_mode, .set_next_event = clkevt_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction integrator_timer_irq = { @@ -413,29 +415,27 @@ static struct irqaction integrator_timer_irq = { .dev_id = &integrator_clockevent, }; -static void integrator_clockevent_init(u32 khz) +static void integrator_clockevent_init(unsigned long inrate) { - struct clock_event_device *evt = &integrator_clockevent; + unsigned long rate = inrate; unsigned int ctrl = 0; - if (khz * 1000 > 0x100000 * HZ) { - khz /= 256; + /* Calculate and program a divisor */ + if (rate > 0x100000 * HZ) { + rate /= 256; ctrl |= TIMER_CTRL_DIV256; - } else if (khz * 1000 > 0x10000 * HZ) { - khz /= 16; + } else if (rate > 0x10000 * HZ) { + rate /= 16; ctrl |= TIMER_CTRL_DIV16; } - - timer_reload = khz * 1000 / HZ; + timer_reload = rate / HZ; writel(ctrl, clkevt_base + TIMER_CTRL); - evt->irq = IRQ_TIMERINT1; - evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xffff, evt); - evt->min_delta_ns = clockevent_delta2ns(0xf, evt); - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); - clockevents_register_device(evt); + clockevents_config_and_register(&integrator_clockevent, + rate, + 1, + 0xffffU); } /* @@ -443,14 +443,20 @@ static void integrator_clockevent_init(u32 khz) */ static void __init ap_init_timer(void) { - u32 khz = TICKS_PER_uSEC * 1000; + struct clk *clk; + unsigned long rate; + + clk = clk_get_sys("ap_timer", NULL); + BUG_ON(IS_ERR(clk)); + clk_enable(clk); + rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); writel(0, TIMER1_VA_BASE + TIMER_CTRL); writel(0, TIMER2_VA_BASE + TIMER_CTRL); - integrator_clocksource_init(khz); - integrator_clockevent_init(khz); + integrator_clocksource_init(rate); + integrator_clockevent_init(rate); } static struct sys_timer ap_timer = { diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 11b86e5b71c..b4d8f8b8a08 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -163,7 +163,7 @@ * 7:2 register number * */ -static DEFINE_SPINLOCK(v3_lock); +static DEFINE_RAW_SPINLOCK(v3_lock); #define PCI_BUS_NONMEM_START 0x00000000 #define PCI_BUS_NONMEM_SIZE SZ_256M @@ -284,7 +284,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, unsigned long flags; u32 v; - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); addr = v3_open_config_window(bus, devfn, where); switch (size) { @@ -302,7 +302,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, } v3_close_config_window(); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); *val = v; return PCIBIOS_SUCCESSFUL; @@ -314,7 +314,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, unsigned long addr; unsigned long flags; - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); addr = v3_open_config_window(bus, devfn, where); switch (size) { @@ -335,7 +335,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, } v3_close_config_window(); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); return PCIBIOS_SUCCESSFUL; } @@ -513,7 +513,7 @@ void __init pci_v3_preinit(void) hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); - spin_lock_irqsave(&v3_lock, flags); + raw_spin_lock_irqsave(&v3_lock, flags); /* * Unlock V3 registers, but only if they were previously locked. @@ -586,7 +586,7 @@ void __init pci_v3_preinit(void) printk(KERN_ERR "PCI: unable to grab PCI error " "interrupt: %d\n", ret); - spin_unlock_irqrestore(&v3_lock, flags); + raw_spin_unlock_irqrestore(&v3_lock, flags); } void __init pci_v3_postinit(void) diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot index 0b0e19fdfe6..3a8c38c3189 100644 --- a/arch/arm/mach-iop13xx/Makefile.boot +++ b/arch/arm/mach-iop13xx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot index 47000dccd61..0a833b11e38 100644 --- a/arch/arm/mach-iop32x/Makefile.boot +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0xa0008000 + zreladdr-y += 0xa0008000 params_phys-y := 0xa0000100 initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-iop33x/Makefile.boot +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot index d84c5807a43..9c7af91d93d 100644 --- a/arch/arm/mach-ixp2000/Makefile.boot +++ b/arch/arm/mach-ixp2000/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4068166c899..59a512672bb 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -13,7 +13,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -39,7 +39,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ixp2000.h> static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h index 4a88d2c33da..af836c76c3f 100644 --- a/arch/arm/mach-ixp2000/include/mach/gpio.h +++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h @@ -3,7 +3,7 @@ * * Copyright (C) 2002 Intel Corporation. * - * This program is free software, you can redistribute it and/or modify + * This program is free software, you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ @@ -11,7 +11,7 @@ /* * IXP2000 GPIO in/out, edge/level detection for IRQs: * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. + * or both Falling-edge and Rising-edge. * This must be called *before* the corresponding IRQ is registerd. * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 235638f800e..634b6c852f6 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -14,6 +14,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mm.h> @@ -40,8 +41,7 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> -#include <mach/gpio.h> - +#include <mach/gpio-ixp2000.h> /************************************************************************* * IXDP2x00 IRQ Initialization diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot index d5561ad15ba..44fb4a717c3 100644 --- a/arch/arm/mach-ixp23xx/Makefile.boot +++ b/arch/arm/mach-ixp23xx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 6f991c5ae86..fd5e7b6881b 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -179,6 +179,25 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 +config MACH_DEVIXP + bool "Omicron DEVIXP" + help + Say 'Y' here if you want your kernel to support the DEVIXP + board from OMICRON electronics GmbH. + +config MACH_MICCPT + bool "Omicron MICCPT" + select PCI + help + Say 'Y' here if you want your kernel to support the MICCPT + board from OMICRON electronics GmbH. + +config MACH_MIC256 + bool "Omicron MIC256" + help + Say 'Y' here if you want your kernel to support the MIC256 + board from OMICRON electronics GmbH. + comment "IXP4xx Options" config IXP4XX_INDIRECT_PCI diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index d807fc367dd..eded94c96dd 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -10,6 +10,7 @@ obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o +obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o @@ -25,6 +26,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o +obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o +obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o +obj-$(CONFIG_MACH_MIC256) += omixp-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot index d84c5807a43..9c7af91d93d 100644 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ b/arch/arm/mach-ixp4xx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 2131832ee6b..f72a3a893c4 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -54,7 +54,7 @@ unsigned long ixp4xx_pci_reg_base = 0; * these transactions are atomic or we will end up * with corrupt data on the bus or in a driver. */ -static DEFINE_SPINLOCK(ixp4xx_pci_lock); +static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); /* * Read from PCI config space @@ -62,10 +62,10 @@ static DEFINE_SPINLOCK(ixp4xx_pci_lock); static void crp_read(u32 ad_cbe, u32 *data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = ad_cbe; *data = *PCI_CRP_RDATA; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } /* @@ -74,10 +74,10 @@ static void crp_read(u32 ad_cbe, u32 *data) static void crp_write(u32 ad_cbe, u32 data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; *PCI_CRP_WDATA = data; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } static inline int check_master_abort(void) @@ -101,7 +101,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) int retval = 0; int i; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -118,7 +118,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -127,7 +127,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -140,7 +140,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -149,7 +149,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -162,7 +162,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -397,7 +397,8 @@ void __init ixp4xx_pci_preinit(void) local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); - local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M); + local_write_config(PCI_BASE_ADDRESS_3, 4, + PHYS_OFFSET + SZ_32M + SZ_16M); /* * Enable CSR window at 64 MiB to allow PCI masters diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 71607a7ecc7..8837fbca27c 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -16,7 +16,7 @@ * Author: Rod Whitby <rod@whitby.id.au> * Maintainers: http://www.nslu2-linux.org/ */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/jiffies.h> #include <linux/timer.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define DSMG600_SDA_PIN 5 #define DSMG600_SCL_PIN 4 diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index a9540cd9037..2887c3578c1 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -14,7 +14,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -27,7 +27,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define FSG_SDA_PIN 12 #define FSG_SCL_PIN 13 diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h index a5f87ded2f2..83d6b4ed60b 100644 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <linux/kernel.h> #include <mach/hardware.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_request(unsigned gpio, const char *label) { return 0; @@ -70,6 +72,7 @@ static inline void gpio_set_value(unsigned gpio, int value) #include <asm-generic/gpio.h> /* cansleep wrappers */ extern int gpio_to_irq(int gpio); +#define gpio_to_irq gpio_to_irq extern int irq_to_gpio(unsigned int irq); #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 57b5410c31f..ffb9d6afb89 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,8 +17,6 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0x0000ffff - extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h index 219d7c1dcdb..eb945a926d0 100644 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) * Some boards are using UART2 as console */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2()) + machine_is_gateway7001() || machine_is_wg302v2() || + machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c new file mode 100644 index 00000000000..ca0bae7fca9 --- /dev/null +++ b/arch/arm/mach-ixp4xx/miccpt-pci.c @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-ixp4xx/miccpt-pci.c + * + * MICCPT board-level PCI initialization + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * Copyright (C) 2006 OMICRON electronics GmbH + * + * Author: Michael Jochum <michael.jochum@omicron.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + + +void __init miccpt_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci miccpt_pci __initdata = { + .nr_controllers = 1, + .preinit = miccpt_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = miccpt_map_irq, +}; + +int __init miccpt_pci_init(void) +{ + if (machine_is_miccpt()) + pci_common_init(&miccpt_pci); + return 0; +} + +subsys_initcall(miccpt_pci_init); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 9f4669260d4..de716fa1aab 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -17,7 +17,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/jiffies.h> @@ -32,7 +32,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/gpio.h> #define NAS100D_SDA_PIN 5 #define NAS100D_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 3676fbf6ef9..ac81ccb26bf 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -16,7 +16,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -30,7 +30,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c new file mode 100644 index 00000000000..3b6a81a696f --- /dev/null +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -0,0 +1,273 @@ +/* + * arch/arm/mach-ixp4xx/omixp-setup.c + * + * omicron ixp4xx board setup + * Copyright (C) 2009 OMICRON electronics GmbH + * + * based nslu2-setup.c, ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#ifdef CONFIG_LEDS_CLASS +#include <linux/leds.h> +#endif + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct resource omixp_flash_resources[] = { + { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition omixp_partitions[] = { + { + .name = "Recovery Bootloader", + .size = 0x00020000, + .offset = 0, + }, { + .name = "Calibration Data", + .size = 0x00020000, + .offset = 0x00020000, + }, { + .name = "Recovery FPGA", + .size = 0x00020000, + .offset = 0x00040000, + }, { + .name = "Release Bootloader", + .size = 0x00020000, + .offset = 0x00060000, + }, { + .name = "Release FPGA", + .size = 0x00020000, + .offset = 0x00080000, + }, { + .name = "Kernel", + .size = 0x00160000, + .offset = 0x000a0000, + }, { + .name = "Filesystem", + .size = 0x00C00000, + .offset = 0x00200000, + }, { + .name = "Persistent Storage", + .size = 0x00200000, + .offset = 0x00E00000, + }, +}; + +static struct flash_platform_data omixp_flash_data[] = { + { + .map_name = "cfi_probe", + .parts = omixp_partitions, + .nr_parts = ARRAY_SIZE(omixp_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device omixp_flash_device[] = { + { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &omixp_flash_data[0], + }, + .resource = &omixp_flash_resources[0], + .num_resources = 1, + }, { + .name = "IXP4XX-Flash", + .id = 1, + .dev = { + .platform_data = &omixp_flash_data[1], + }, + .resource = &omixp_flash_resources[1], + .num_resources = 1, + }, +}; + +/* Swap UART's - These boards have the console on UART2. The following + * configuration is used: + * ttyS0 .. UART2 + * ttyS1 .. UART1 + * This way standard images can be used with the kernel that expect + * the console on ttyS0. + */ +static struct resource omixp_uart_resources[] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port omixp_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + /* list termination */ + } +}; + +static struct platform_device omixp_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = omixp_uart_data, + .num_resources = 2, + .resource = omixp_uart_resources, +}; + +static struct gpio_led mic256_led_pins[] = { + { + .name = "LED-A", + .gpio = 7, + }, +}; + +static struct gpio_led_platform_data mic256_led_data = { + .num_leds = ARRAY_SIZE(mic256_led_pins), + .leds = mic256_led_pins, +}; + +static struct platform_device mic256_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &mic256_led_data, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + }, +}; + + +static struct platform_device *devixp_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *mic256_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &mic256_leds, + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *miccpt_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &omixp_flash_device[1], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static void __init omixp_init(void) +{ + ixp4xx_sys_init(); + + /* 16MiB Boot Flash */ + omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0); + omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0); + + /* 32 MiB Data Flash */ + omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2); + + if (machine_is_devixp()) + platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev)); + else if (machine_is_miccpt()) + platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev)); + else if (machine_is_mic256()) + platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev)); +} + +#ifdef CONFIG_MACH_DEVIXP +MACHINE_START(DEVIXP, "Omicron DEVIXP") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MICCPT +MACHINE_START(MICCPT, "Omicron MICCPT") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MIC256 +MACHINE_START(MIC256, "Omicron MIC256") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +MACHINE_END +#endif diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 05d193a25b2..c4c68e5b94f 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,14 +7,13 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include <asm/gpio.h> #include "common.h" static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index b0a7d979a8e..cc431fa22cc 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <plat/mpp.h> #include "common.h" diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 7e3e8160ed3..853efd9133c 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -3,7 +3,7 @@ # Makefile for KS8695 architecture support # -obj-y := cpu.o irq.o time.o gpio.o devices.o +obj-y := cpu.o irq.o time.o devices.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot index 48eb2cb3ac7..c9b0bebcf23 100644 --- a/arch/arm/mach-ks8695/Makefile.boot +++ b/arch/arm/mach-ks8695/Makefile.boot @@ -3,6 +3,6 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index a5fcc7c7fe1..a91f99d265a 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -34,7 +34,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index fb91a716a7d..d24bcef2e2d 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -29,7 +29,7 @@ #include <asm/mach/irq.h> #include <mach/devices.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 8f67a750b6c..16c95657f8f 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -5,7 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -18,7 +18,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> +#include <mach/gpio-ks8695.h> #include <mach/devices.h> #include "generic.h" diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index b89fb6d46cc..73bd6381287 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c deleted file mode 100644 index 31e456508a6..00000000000 --- a/arch/arm/mach-ks8695/gpio.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * arch/arm/mach-ks8695/gpio.c - * - * Copyright (C) 2006 Andrew Victor - * Updated to GPIOLIB, Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/mach/irq.h> - -#include <mach/regs-gpio.h> -#include <mach/gpio.h> - -/* - * Configure a GPIO line for either GPIO function, or its internal - * function (Interrupt, Timer, etc). - */ -static void ks8695_gpio_mode(unsigned int pin, short gpio) -{ - unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; - unsigned long x, flags; - - if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */ - return; - - local_irq_save(flags); - - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); - if (gpio) /* GPIO: set bit to 0 */ - x &= ~enable[pin]; - else /* Internal function: set bit to 1 */ - x |= enable[pin]; - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC); - - local_irq_restore(flags); -} - - -static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 }; - -/* - * Configure GPIO pin as external interrupt source. - */ -int ks8695_gpio_interrupt(unsigned int pin, unsigned int type) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ - return -EINVAL; - - local_irq_save(flags); - - /* set pin as input */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x &= ~IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - /* Set IRQ triggering type */ - irq_set_irq_type(gpio_irq[pin], type); - - /* enable interrupt mode */ - ks8695_gpio_mode(pin, 0); - - return 0; -} -EXPORT_SYMBOL(ks8695_gpio_interrupt); - - - -/* .... Generic GPIO interface .............................................. */ - -/* - * Configure the GPIO line as an input. - */ -static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - /* set pin to GPIO mode */ - ks8695_gpio_mode(pin, 1); - - local_irq_save(flags); - - /* set pin as input */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x &= ~IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - return 0; -} - - -/* - * Configure the GPIO line as an output, with default state. - */ -static int ks8695_gpio_direction_output(struct gpio_chip *gc, - unsigned int pin, int state) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - /* set pin to GPIO mode */ - ks8695_gpio_mode(pin, 1); - - local_irq_save(flags); - - /* set line state */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - if (state) - x |= IOPD(pin); - else - x &= ~IOPD(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); - - /* set pin as output */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - x |= IOPM(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM); - - local_irq_restore(flags); - - return 0; -} - - -/* - * Set the state of an output GPIO line. - */ -static void ks8695_gpio_set_value(struct gpio_chip *gc, - unsigned int pin, int state) -{ - unsigned long x, flags; - - if (pin > KS8695_GPIO_15) - return; - - local_irq_save(flags); - - /* set output line state */ - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - if (state) - x |= IOPD(pin); - else - x &= ~IOPD(pin); - __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); - - local_irq_restore(flags); -} - - -/* - * Read the state of a GPIO line. - */ -static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin) -{ - unsigned long x; - - if (pin > KS8695_GPIO_15) - return -EINVAL; - - x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - return (x & IOPD(pin)) != 0; -} - - -/* - * Map GPIO line to IRQ number. - */ -static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin) -{ - if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */ - return -EINVAL; - - return gpio_irq[pin]; -} - -/* - * Map IRQ number to GPIO line. - */ -int irq_to_gpio(unsigned int irq) -{ - if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3)) - return -EINVAL; - - return (irq - KS8695_IRQ_EXTERN0); -} -EXPORT_SYMBOL(irq_to_gpio); - -/* GPIOLIB interface */ - -static struct gpio_chip ks8695_gpio_chip = { - .label = "KS8695", - .direction_input = ks8695_gpio_direction_input, - .direction_output = ks8695_gpio_direction_output, - .get = ks8695_gpio_get_value, - .set = ks8695_gpio_set_value, - .to_irq = ks8695_gpio_to_irq, - .base = 0, - .ngpio = 16, - .can_sleep = 0, -}; - -/* Register the GPIOs */ -void ks8695_register_gpios(void) -{ - if (gpiochip_add(&ks8695_gpio_chip)) - printk(KERN_ERR "Unable to register core GPIOs\n"); -} - -/* .... Debug interface ..................................................... */ - -#ifdef CONFIG_DEBUG_FS - -static int ks8695_gpio_show(struct seq_file *s, void *unused) -{ - unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; - unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM }; - unsigned long mode, ctrl, data; - int i; - - mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); - ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); - data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); - - seq_printf(s, "Pin\tI/O\tFunction\tState\n\n"); - - for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) { - seq_printf(s, "%i:\t", i); - - seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input"); - - if (i <= KS8695_GPIO_3) { - if (ctrl & enable[i]) { - seq_printf(s, "EXT%i ", i); - - switch ((ctrl & intmask[i]) >> (4 * i)) { - case IOPC_TM_LOW: - seq_printf(s, "(Low)"); break; - case IOPC_TM_HIGH: - seq_printf(s, "(High)"); break; - case IOPC_TM_RISING: - seq_printf(s, "(Rising)"); break; - case IOPC_TM_FALLING: - seq_printf(s, "(Falling)"); break; - case IOPC_TM_EDGE: - seq_printf(s, "(Edges)"); break; - } - } - else - seq_printf(s, "GPIO\t"); - } - else if (i <= KS8695_GPIO_5) { - if (ctrl & enable[i]) - seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4); - else - seq_printf(s, "GPIO\t"); - } - else - seq_printf(s, "GPIO\t"); - - seq_printf(s, "\t"); - - seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0); - } - return 0; -} - -static int ks8695_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, ks8695_gpio_show, NULL); -} - -static const struct file_operations ks8695_gpio_operations = { - .open = ks8695_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init ks8695_gpio_debugfs_init(void) -{ - /* /sys/kernel/debug/ks8695_gpio */ - (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); - return 0; -} -postcore_initcall(ks8695_gpio_debugfs_init); - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h new file mode 100644 index 00000000000..6eb034d6032 --- /dev/null +++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2006 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_KS8659_GPIO_H +#define __MACH_KS8659_GPIO_H + +#include <linux/kernel.h> + +#define KS8695_GPIO_0 0 +#define KS8695_GPIO_1 1 +#define KS8695_GPIO_2 2 +#define KS8695_GPIO_3 3 +#define KS8695_GPIO_4 4 +#define KS8695_GPIO_5 5 +#define KS8695_GPIO_6 6 +#define KS8695_GPIO_7 7 +#define KS8695_GPIO_8 8 +#define KS8695_GPIO_9 9 +#define KS8695_GPIO_10 10 +#define KS8695_GPIO_11 11 +#define KS8695_GPIO_12 12 +#define KS8695_GPIO_13 13 +#define KS8695_GPIO_14 14 +#define KS8695_GPIO_15 15 + +/* + * Configure GPIO pin as external interrupt source. + */ +extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); + +/* Register the GPIOs */ +extern void ks8695_register_gpios(void); + +#endif /* __MACH_KS8659_GPIO_H */ diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h index 86312d476bc..f5fda36e451 100644 --- a/arch/arm/mach-ks8695/include/mach/gpio.h +++ b/arch/arm/mach-ks8695/include/mach/gpio.h @@ -11,47 +11,9 @@ #ifndef __ASM_ARCH_GPIO_H_ #define __ASM_ARCH_GPIO_H_ -#include <linux/kernel.h> - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - -/* - * Configure GPIO pin as external interrupt source. - */ -extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - /* * Map IRQ number to GPIO line. */ extern int irq_to_gpio(unsigned int irq); -#include <asm-generic/gpio.h> - -/* If it turns out that we need to optimise GPIO access for the - * Micrel's GPIOs, then these can be changed to check their argument - * directly as static inlines. However for now it's probably not - * worthwhile. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_to_irq __gpio_to_irq - -/* Register the GPIOs */ -extern void ks8695_register_gpios(void); - #endif diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index 184ef74e4be..d6f6502ac9b 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -7,14 +7,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/gpio.h> #include <asm/leds.h> #include <mach/devices.h> -#include <mach/gpio.h> static inline void ks8695_led_on(unsigned int led) diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index a5fc5d0eeae..f5db805ab95 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -3,6 +3,6 @@ # obj-y := timer.o irq.o common.o serial.o clock.o -obj-y += gpiolib.o pm.o suspend.o +obj-y += pm.o suspend.o obj-y += phy3250.o diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index b796b41ebf8..2cfe0ee635c 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c deleted file mode 100644 index 69061ea8997..00000000000 --- a/arch/arm/mach-lpc32xx/gpiolib.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/gpiolib.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) -#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) -#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008) -#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C) -#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010) -#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014) -#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018) -#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C) -#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020) -#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024) -#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) -#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) -#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) -#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040) -#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044) -#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048) -#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C) -#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050) -#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054) -#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058) -#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060) -#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064) -#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068) -#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C) -#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070) -#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074) -#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078) - -#define GPIO012_PIN_TO_BIT(x) (1 << (x)) -#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25)) -#define GPO3_PIN_TO_BIT(x) (1 << (x)) -#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) -#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x)) -#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y)) -#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1) -#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) - -struct gpio_regs { - void __iomem *inp_state; - void __iomem *outp_set; - void __iomem *outp_clr; - void __iomem *dir_set; - void __iomem *dir_clr; -}; - -/* - * GPIO names - */ -static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = { - "p0.0", "p0.1", "p0.2", "p0.3", - "p0.4", "p0.5", "p0.6", "p0.7" -}; - -static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = { - "p1.0", "p1.1", "p1.2", "p1.3", - "p1.4", "p1.5", "p1.6", "p1.7", - "p1.8", "p1.9", "p1.10", "p1.11", - "p1.12", "p1.13", "p1.14", "p1.15", - "p1.16", "p1.17", "p1.18", "p1.19", - "p1.20", "p1.21", "p1.22", "p1.23", -}; - -static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { - "p2.0", "p2.1", "p2.2", "p2.3", - "p2.4", "p2.5", "p2.6", "p2.7", - "p2.8", "p2.9", "p2.10", "p2.11", - "p2.12" -}; - -static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { - "gpi000", "gpio01", "gpio02", "gpio03", - "gpio04", "gpio05" -}; - -static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = { - "gpi00", "gpi01", "gpi02", "gpi03", - "gpi04", "gpi05", "gpi06", "gpi07", - "gpi08", "gpi09", NULL, NULL, - NULL, NULL, NULL, "gpi15", - "gpi16", "gpi17", "gpi18", "gpi19", - "gpi20", "gpi21", "gpi22", "gpi23", - "gpi24", "gpi25", "gpi26", "gpi27" -}; - -static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = { - "gpo00", "gpo01", "gpo02", "gpo03", - "gpo04", "gpo05", "gpo06", "gpo07", - "gpo08", "gpo09", "gpo10", "gpo11", - "gpo12", "gpo13", "gpo14", "gpo15", - "gpo16", "gpo17", "gpo18", "gpo19", - "gpo20", "gpo21", "gpo22", "gpo23" -}; - -static struct gpio_regs gpio_grp_regs_p0 = { - .inp_state = LPC32XX_GPIO_P0_INP_STATE, - .outp_set = LPC32XX_GPIO_P0_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P0_DIR_SET, - .dir_clr = LPC32XX_GPIO_P0_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p1 = { - .inp_state = LPC32XX_GPIO_P1_INP_STATE, - .outp_set = LPC32XX_GPIO_P1_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P1_DIR_SET, - .dir_clr = LPC32XX_GPIO_P1_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p2 = { - .inp_state = LPC32XX_GPIO_P2_INP_STATE, - .outp_set = LPC32XX_GPIO_P2_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P2_DIR_SET, - .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, -}; - -static struct gpio_regs gpio_grp_regs_p3 = { - .inp_state = LPC32XX_GPIO_P3_INP_STATE, - .outp_set = LPC32XX_GPIO_P3_OUTP_SET, - .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR, - .dir_set = LPC32XX_GPIO_P2_DIR_SET, - .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, -}; - -struct lpc32xx_gpio_chip { - struct gpio_chip chip; - struct gpio_regs *gpio_grp; -}; - -static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio( - struct gpio_chip *gpc) -{ - return container_of(gpc, struct lpc32xx_gpio_chip, chip); -} - -static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group, - unsigned pin, int input) -{ - if (input) - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->dir_clr); - else - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->dir_set); -} - -static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int input) -{ - u32 u = GPIO3_PIN_TO_BIT(pin); - - if (input) - __raw_writel(u, group->gpio_grp->dir_clr); - else - __raw_writel(u, group->gpio_grp->dir_set); -} - -static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - if (high) - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->outp_set); - else - __raw_writel(GPIO012_PIN_TO_BIT(pin), - group->gpio_grp->outp_clr); -} - -static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - u32 u = GPIO3_PIN_TO_BIT(pin); - - if (high) - __raw_writel(u, group->gpio_grp->outp_set); - else - __raw_writel(u, group->gpio_grp->outp_clr); -} - -static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group, - unsigned pin, int high) -{ - if (high) - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); - else - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); -} - -static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), - pin); -} - -static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - int state = __raw_readl(group->gpio_grp->inp_state); - - /* - * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped - * to bits 10..14, while GPIOP3-5 is mapped to bit 24. - */ - return GPIO3_PIN_IN_SEL(state, pin); -} - -static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, - unsigned pin) -{ - return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); -} - -/* - * GENERIC_GPIO primitives. - */ -static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip, - unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p012(group, pin, 1); - - return 0; -} - -static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip, - unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p3(group, pin, 1); - - return 0; -} - -static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip, - unsigned pin) -{ - return 0; -} - -static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpio_state_p012(group, pin); -} - -static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpio_state_p3(group, pin); -} - -static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - return __get_gpi_state_p3(group, pin); -} - -static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p012(group, pin, 0); - - return 0; -} - -static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_dir_p3(group, pin, 0); - - return 0; -} - -static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, - int value) -{ - return 0; -} - -static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_level_p012(group, pin, value); -} - -static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpio_level_p3(group, pin, value); -} - -static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin, - int value) -{ - struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); - - __set_gpo_level_p3(group, pin, value); -} - -static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin) -{ - if (pin < chip->ngpio) - return 0; - - return -EINVAL; -} - -static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { - { - .chip = { - .label = "gpio_p0", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P0_GRP, - .ngpio = LPC32XX_GPIO_P0_MAX, - .names = gpio_p0_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p0, - }, - { - .chip = { - .label = "gpio_p1", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P1_GRP, - .ngpio = LPC32XX_GPIO_P1_MAX, - .names = gpio_p1_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p1, - }, - { - .chip = { - .label = "gpio_p2", - .direction_input = lpc32xx_gpio_dir_input_p012, - .get = lpc32xx_gpio_get_value_p012, - .direction_output = lpc32xx_gpio_dir_output_p012, - .set = lpc32xx_gpio_set_value_p012, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P2_GRP, - .ngpio = LPC32XX_GPIO_P2_MAX, - .names = gpio_p2_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p2, - }, - { - .chip = { - .label = "gpio_p3", - .direction_input = lpc32xx_gpio_dir_input_p3, - .get = lpc32xx_gpio_get_value_p3, - .direction_output = lpc32xx_gpio_dir_output_p3, - .set = lpc32xx_gpio_set_value_p3, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPIO_P3_GRP, - .ngpio = LPC32XX_GPIO_P3_MAX, - .names = gpio_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, - { - .chip = { - .label = "gpi_p3", - .direction_input = lpc32xx_gpio_dir_in_always, - .get = lpc32xx_gpi_get_value, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPI_P3_GRP, - .ngpio = LPC32XX_GPI_P3_MAX, - .names = gpi_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, - { - .chip = { - .label = "gpo_p3", - .direction_output = lpc32xx_gpio_dir_out_always, - .set = lpc32xx_gpo_set_value, - .request = lpc32xx_gpio_request, - .base = LPC32XX_GPO_P3_GRP, - .ngpio = LPC32XX_GPO_P3_MAX, - .names = gpo_p3_names, - .can_sleep = 0, - }, - .gpio_grp = &gpio_grp_regs_p3, - }, -}; - -void __init lpc32xx_gpio_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) - gpiochip_add(&lpc32xx_gpiochip[i].chip); -} diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h new file mode 100644 index 00000000000..1816e22a347 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h @@ -0,0 +1,50 @@ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_GPIO_LPC32XX_H +#define __MACH_GPIO_LPC32XX_H + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 28 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +#endif /* __MACH_GPIO_LPC32XX_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h index 67d03da1eee..40a8c178f10 100644 --- a/arch/arm/mach-lpc32xx/include/mach/gpio.h +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -1,74 +1 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/gpio.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <asm-generic/gpio.h> - -/* - * Note! - * Muxed GP pins need to be setup to the GP state in the board level - * code prior to using this driver. - * GPI pins : 28xP3 group - * GPO pins : 24xP3 group - * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group - */ - -#define LPC32XX_GPIO_P0_MAX 8 -#define LPC32XX_GPIO_P1_MAX 24 -#define LPC32XX_GPIO_P2_MAX 13 -#define LPC32XX_GPIO_P3_MAX 6 -#define LPC32XX_GPI_P3_MAX 28 -#define LPC32XX_GPO_P3_MAX 24 - -#define LPC32XX_GPIO_P0_GRP 0 -#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) -#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) -#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) -#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) -#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) - -/* - * A specific GPIO can be selected with this macro - * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) - * See the LPC32x0 User's guide for GPIO group numbers - */ -#define LPC32XX_GPIO(x, y) ((x) + (y)) - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - -#endif +/* empty */ diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 9b621e14d16..6d2f0d1b937 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/platform.h> +#include <mach/gpio-lpc32xx.h> #include "common.h" /* diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 56ef5f6c811..323d4c9e9f4 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,7 +77,7 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. -config MACH_SHEEVAD +config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" select CPU_PXA168 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b0ac942327a..8f948f98164 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,4 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o -obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o +obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot index 574a4aa8321..5edf03e2bee 100644 --- a/arch/arm/mach-mmp/Makefile.boot +++ b/arch/arm/mach-mmp/Makefile.boot @@ -1 +1 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 06b5fa853c9..06b5ad77460 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -17,13 +17,13 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> -#include <mach/gpio.h> #include <video/pxa168fb.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> @@ -160,7 +160,7 @@ static struct mtd_partition aspenite_nand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index c79162a50f2..e411252e3d3 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 3143e994e67..149b30cd146 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -30,7 +30,7 @@ extern struct clkops apmu_clk_ops; #define APBC_CLK(_name, _reg, _fnclksel, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = &apbc_clk_ops, \ @@ -38,7 +38,7 @@ struct clk clk_##_name = { \ #define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APBC_##_reg, \ + .clk_rst = APBC_##_reg, \ .fnclksel = _fnclksel, \ .rate = _rate, \ .ops = _ops, \ @@ -46,7 +46,7 @@ struct clk clk_##_name = { \ #define APMU_CLK(_name, _reg, _eval, _rate) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = &apmu_clk_ops, \ @@ -54,7 +54,7 @@ struct clk clk_##_name = { \ #define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \ struct clk clk_##_name = { \ - .clk_rst = (void __iomem *)APMU_##_reg, \ + .clk_rst = APMU_##_reg, \ .enable_val = _eval, \ .rate = _rate, \ .ops = _ops, \ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 0ec0ca80bb3..5720674739f 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -27,12 +27,12 @@ EXPORT_SYMBOL(mmp_chip_id); static struct map_desc standard_io_desc[] __initdata = { { .pfn = __phys_to_pfn(APB_PHYS_BASE), - .virtual = APB_VIRT_BASE, + .virtual = (unsigned long)APB_VIRT_BASE, .length = APB_PHYS_SIZE, .type = MT_DEVICE, }, { .pfn = __phys_to_pfn(AXI_PHYS_BASE), - .virtual = AXI_VIRT_BASE, + .virtual = (unsigned long)AXI_VIRT_BASE, .length = AXI_PHYS_SIZE, .type = MT_DEVICE, }, diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 98e25d9aaab..69156568bc4 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,11 +9,11 @@ */ #include <linux/init.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> @@ -188,7 +188,7 @@ static void __init gplugd_init(void) pxa168_add_eth(&gplugd_eth_platform_data); } -MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") +MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, .nr_irqs = IRQ_BOARD_START, .init_irq = pxa168_init_irq, diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h index 3254089a644..3e404acd6ff 100644 --- a/arch/arm/mach-mmp/include/mach/addr-map.h +++ b/arch/arm/mach-mmp/include/mach/addr-map.h @@ -11,6 +11,12 @@ #ifndef __ASM_MACH_ADDR_MAP_H #define __ASM_MACH_ADDR_MAP_H +#ifndef __ASSEMBLER__ +#define IOMEM(x) ((void __iomem *)(x)) +#else +#define IOMEM(x) (x) +#endif + /* APB - Application Subsystem Peripheral Bus * * NOTE: the DMA controller registers are actually on the AXI fabric #1 @@ -18,11 +24,11 @@ * peripherals on APB, let's count it into the ABP mapping area. */ #define APB_PHYS_BASE 0xd4000000 -#define APB_VIRT_BASE 0xfe000000 +#define APB_VIRT_BASE IOMEM(0xfe000000) #define APB_PHYS_SIZE 0x00200000 #define AXI_PHYS_BASE 0xd4200000 -#define AXI_VIRT_BASE 0xfe200000 +#define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 /* Static Memory Controller - Chip Select 0 and 1 */ diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h new file mode 100644 index 00000000000..d14eeaf1632 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -0,0 +1,30 @@ +#ifndef __ASM_MACH_GPIO_PXA_H +#define __ASM_MACH_GPIO_PXA_H + +#include <mach/addr-map.h> +#include <mach/irqs.h> + +#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) + +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +/* NOTE: these macros are defined here to make optimization of + * gpio_{get,set}_value() to work when 'gpio' is a constant. + * Usage of these macros otherwise is no longer recommended, + * use generic GPIO API whenever possible. + */ +#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) + +#include <plat/gpio-pxa.h> + +#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index 7bfb827f3fe..681262359d1 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -1,36 +1,13 @@ #ifndef __ASM_MACH_GPIO_H #define __ASM_MACH_GPIO_H -#include <mach/addr-map.h> -#include <mach/irqs.h> #include <asm-generic/gpio.h> -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) - -#define NR_BUILTIN_GPIO IRQ_GPIO_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) #define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) - #define __gpio_is_inverted(gpio) (0) #define __gpio_is_occupied(gpio) (0) -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - #include <plat/gpio.h> #endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 7f005843a70..7fb568d2845 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -35,6 +35,13 @@ extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; extern struct pxa_device_desc pxa168_device_eth; +struct pxa168_usb_pdata { + /* If NULL, default phy init routine for PXA168 would be called */ + int (*phy_init)(void __iomem *usb_phy_reg_base); +}; +/* pdata can be NULL */ +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); + static inline int pxa168_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 5d6421d6325..8bfac661262 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/mfd/max8925.h> diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 079c18861d5..7a7e8e4dde4 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -25,7 +24,7 @@ #include <mach/irqs.h> #include <mach/dma.h> #include <mach/mfp.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/devices.h> #include <mach/mmp2.h> @@ -87,7 +86,8 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = { void mmp2_clear_pmic_int(void) { - unsigned long mfpr_pmic, data; + void __iomem *mfpr_pmic; + unsigned long data; mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4; data = __raw_readl(mfpr_pmic); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 0156f535dae..76ca15c00e4 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,10 +20,13 @@ #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <mach/pxa168.h> #include "common.h" #include "clock.h" @@ -83,6 +85,7 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { @@ -104,6 +107,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), }; static int __init pxa168_init(void) @@ -169,3 +173,44 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); + +struct resource pxa168_usb_host_resources[] = { + /* USB Host conroller register base */ + [0] = { + .start = 0xd4209000, + .end = 0xd4209000 + 0x200, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-host", + }, + /* USB PHY register base */ + [1] = { + .start = 0xd4206000, + .end = 0xd4206000 + 0xff, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-phy", + }, + [2] = { + .start = IRQ_PXA168_USB2, + .end = IRQ_PXA168_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); +struct platform_device pxa168_device_usb_host = { + .name = "pxa168-ehci", + .id = -1, + .dev = { + .dma_mask = &pxa168_usb_host_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + + .num_resources = ARRAY_SIZE(pxa168_usb_host_resources), + .resource = pxa168_usb_host_resources, +}; + +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) +{ + pxa168_device_usb_host.dev.platform_data = pdata; + return platform_device_register(&pxa168_device_usb_host); +} diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 1464607aa60..4ebbfbba39f 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +19,7 @@ #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index c296b75c445..eb5be879fd8 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -7,18 +7,18 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> -#include <mach/gpio.h> #include "common.h" diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 6bd37a27e5f..176515a7698 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -93,7 +93,7 @@ static struct mtd_partition ttc_dkb_onenand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot index 24dfbf8c07c..9b803a578b4 100644 --- a/arch/arm/mach-msm/Makefile.boot +++ b/arch/arm/mach-msm/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 16c86f8b4f3..a60ab6d04ec 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -78,8 +78,8 @@ static void __init halibut_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init halibut_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = PHYS_OFFSET; diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 8a1672ee4e4..5a4882fc6f7 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -53,8 +53,8 @@ static void __init mahimahi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init mahimahi_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init mahimahi_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index a80765533f1..6d84ee740df 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <mach/vreg.h> #include <mach/mpp.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index bb72ea0383b..71de5062c71 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -31,7 +31,6 @@ #include <asm/memory.h> #include <asm/setup.h> -#include <mach/gpio.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include <mach/dma.h> diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 51109b1f434..7e8909c978c 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -14,7 +14,7 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -32,7 +32,6 @@ #include <mach/board.h> #include <mach/irqs.h> #include <mach/sirc.h> -#include <mach/gpio.h> #include <mach/vreg.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index dc0bcb5a6b9..32b465763db 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -11,7 +11,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,7 +22,6 @@ #include <linux/delay.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -77,8 +76,8 @@ static struct map_desc sapphire_io_desc[] __initdata = { } }; -static void __init sapphire_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init sapphire_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { int smi_sz = parse_tag_smi((const struct tag *)tags); diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index f7a9724788b..8650342b749 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mmc.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <linux/debugfs.h> -#include <asm/gpio.h> #include <asm/io.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 729bb49a44c..25105c1027f 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/board-trout-mddi.c ** Author: Brian Swetland <swetland@google.com> */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -11,7 +11,6 @@ #include <linux/err.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <mach/msm_fb.h> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 22d5694f5fe..6b9b227c87c 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -48,8 +48,8 @@ static void __init trout_init_irq(void) msm_init_irq(); } -static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init trout_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index 22a53766962..d9145dfc2a3 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -18,7 +18,7 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/spinlock.h> -#include <linux/pm_qos_params.h> +#include <linux/pm_qos.h> #include <linux/mutex.h> #include <linux/clk.h> #include <linux/string.h> diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index c4f5e26feb4..993780f490a 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -176,12 +176,6 @@ static struct resource resources_sdc1[] = { .name = "cmd_irq", }, { - .start = INT_SDC1_1, - .end = INT_SDC1_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, - { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" }, @@ -204,12 +198,6 @@ static struct resource resources_sdc2[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC2_1, - .end = INT_SDC2_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -233,12 +221,6 @@ static struct resource resources_sdc3[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC3_1, - .end = INT_SDC3_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -262,12 +244,6 @@ static struct resource resources_sdc4[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC4_1, - .end = INT_SDC4_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 12d8deb78d9..131633b12a3 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -140,12 +140,6 @@ static struct resource resources_sdc1[] = { .name = "cmd_irq", }, { - .start = INT_SDC1_1, - .end = INT_SDC1_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, - { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" }, @@ -168,12 +162,6 @@ static struct resource resources_sdc2[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC2_1, - .end = INT_SDC2_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -197,12 +185,6 @@ static struct resource resources_sdc3[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC3_1, - .end = INT_SDC3_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" @@ -226,12 +208,6 @@ static struct resource resources_sdc4[] = { .flags = IORESOURCE_IRQ, .name = "cmd_irq", }, - { - .start = INT_SDC4_1, - .end = INT_SDC4_1, - .flags = IORESOURCE_IRQ, - .name = "pio_irq", - }, { .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, .name = "status_irq" diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 5a31f70dfb8..41c252de021 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -37,7 +37,7 @@ static inline void platform_do_lowpower(unsigned int cpu) : : "memory", "cc"); - if (pen_release == cpu) { + if (pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 36ad50d3bfa..40a8c178f10 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -1,26 +1 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * Author: Mike Lockwood <lockwood@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __ASM_ARCH_MSM_GPIO_H -#define __ASM_ARCH_MSM_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __ASM_ARCH_MSM_GPIO_H */ +/* empty */ diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h index 5631b51cec4..ffcd9e3a6a7 100644 --- a/arch/arm/mach-msm/include/mach/mmc.h +++ b/arch/arm/mach-msm/include/mach/mmc.h @@ -8,13 +8,6 @@ #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> -struct embedded_sdio_data { - struct sdio_cis cis; - struct sdio_cccr cccr; - struct sdio_embedded_func *funcs; - int num_funcs; -}; - struct msm_mmc_gpio { unsigned no; const char *name; @@ -29,9 +22,9 @@ struct msm_mmc_platform_data { unsigned int ocr_mask; /* available voltages */ u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); - struct embedded_sdio_data *embedded_sdio; int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); struct msm_mmc_gpio_data *gpio_data; + void (*init_card)(struct mmc_card *card); }; #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 72765952091..fdec58aaa35 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -117,7 +117,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - pen_release = cpu; + pen_release = cpu_logical_map(cpu); __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ b/arch/arm/mach-mv78xx0/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 3e24431bb5e..e421b701663 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/irq.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 59b7686b920..cf4e494d44b 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -7,13 +7,12 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> #include <plat/mpp.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index e928be1b675..ca207ca305e 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot @@ -1,9 +1,9 @@ - zreladdr-$(CONFIG_ARCH_MX50) := 0x70008000 + zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000 + zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000 + zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c index 0624fb8edff..98052fc852c 100644 --- a/arch/arm/mach-mx5/pm-imx5.c +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -20,9 +20,13 @@ static struct clk *gpc_dvfs_clk; +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + static int mx5_suspend_enter(suspend_state_t state) { - clk_enable(gpc_dvfs_clk); switch (state) { case PM_SUSPEND_MEM: mx5_cpu_lp_set(STOP_POWER_OFF); @@ -43,11 +47,14 @@ static int mx5_suspend_enter(suspend_state_t state) __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); } cpu_do_idle(); - clk_disable(gpc_dvfs_clk); - return 0; } +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + static int mx5_pm_valid(suspend_state_t state) { return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); @@ -55,7 +62,9 @@ static int mx5_pm_valid(suspend_state_t state) static const struct platform_suspend_ops mx5_suspend_ops = { .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, }; static int __init mx5_pm_init(void) diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index eb541e0291d..07b11fe6453 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -1 +1 @@ -zreladdr-y := 0x40008000 +zreladdr-y += 0x40008000 diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index e2fb70c6a74..229ae349421 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -349,7 +349,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ - reg |= frac; \ + reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ } \ \ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 714570d8366..90c6b7836ad 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -14,17 +14,9 @@ #include <mach/mx23.h> #include <mach/mx28.h> -#ifdef CONFIG_SOC_IMX23 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#ifdef CONFIG_DEBUG_IMX23_UART #define UART_PADDR MX23_DUART_BASE_ADDR -#endif - -#ifdef CONFIG_SOC_IMX28 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX28_UART) #define UART_PADDR MX28_DUART_BASE_ADDR #endif diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h index 56025aa0a63..40a8c178f10 100644 --- a/arch/arm/mach-mxs/include/mach/gpio.h +++ b/arch/arm/mach-mxs/include/mach/gpio.h @@ -1,31 +1 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_GPIO_H__ -#define __MACH_MXS_GPIO_H__ - -#include <asm-generic/gpio.h> - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __MACH_MXS_GPIO_H__ */ +/* empty */ diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index a1d132dce5c..c325fbe4e4c 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -182,6 +182,6 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK") /* Maintainer: Freescale Semiconductor, Inc. */ .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = mx23evk_init, .timer = &mx23evk_timer, + .init_machine = mx23evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index e7bff1e2cd2..ac2316d53d3 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -499,6 +499,6 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK") /* Maintainer: Freescale Semiconductor, Inc. */ .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = mx28evk_init, .timer = &mx28evk_timer, + .init_machine = mx28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index ce5d5632e62..9a1f0e7a338 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -176,6 +176,6 @@ static struct sys_timer tx28_timer = { MACHINE_START(TX28, "Ka-Ro electronics TX28 module") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = tx28_stk5v3_init, .timer = &tx28_timer, + .init_machine = tx28_stk5v3_init, MACHINE_END diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot index b81cf6aff0a..534a4d27055 100644 --- a/arch/arm/mach-netx/Makefile.boot +++ b/arch/arm/mach-netx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot index c7e75acfe6c..ff0a4b5b0a8 100644 --- a/arch/arm/mach-nomadik/Makefile.boot +++ b/arch/arm/mach-nomadik/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 398a75f62be..0cbb74c96ef 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <plat/gpio-nomadik.h> #include <plat/mtu.h> #include <mach/setup.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index ac58e3b03b1..dc67717db6f 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -21,8 +21,8 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index abfe25a08d6..0fc2f6f1cc9 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -3,8 +3,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> -#include <linux/gpio.h> #include <linux/platform_device.h> +#include <plat/gpio-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 7a81a042034..efdde0ae0a4 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,6 +1,4 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig deleted file mode 100644 index 2bc40a280fa..00000000000 --- a/arch/arm/mach-nuc93x/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -if ARCH_NUC93X - -config CPU_NUC932 - bool - help - Support for NUC932 of Nuvoton NUC93X CPUs. - -menu "NUC932 Machines" - -config MACH_NUC932EVB - bool "Nuvoton NUC932 Evaluation Board" - default y - select CPU_NUC932 - help - Say Y here if you are using the Nuvoton NUC932EVB - -endmenu - -endif diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile deleted file mode 100644 index 440e2dec6c8..00000000000 --- a/arch/arm/mach-nuc93x/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := irq.o time.o dev.o cpu.o clock.o -# NUC932 CPU support files - -obj-$(CONFIG_CPU_NUC932) += nuc932.o - -# machine support - -obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot deleted file mode 100644 index a057b546b6e..00000000000 --- a/arch/arm/mach-nuc93x/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 - diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c deleted file mode 100644 index 0521efbc48c..00000000000 --- a/arch/arm/mach-nuc93x/clock.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/clock.c - * - * Copyright (c) 2008 Nuvoton technology corporation - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include "clock.h" - -static DEFINE_SPINLOCK(clocks_lock); - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - (clk->enable)(clk, 1); - spin_unlock_irqrestore(&clocks_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - WARN_ON(clk->enabled == 0); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - (clk->enable)(clk, 0); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return 27000000; -} -EXPORT_SYMBOL(clk_get_rate); - -void nuc93x_clk_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->cken; - unsigned long clken; - - clken = __raw_readl(NUC93X_VA_CLKPWR); - - if (enable) - clken |= clocks; - else - clken &= ~clocks; - - __raw_writel(clken, NUC93X_VA_CLKPWR); -} - -void clks_register(struct clk_lookup *clks, size_t num) -{ - int i; - - for (i = 0; i < num; i++) - clkdev_add(&clks[i]); -} diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h deleted file mode 100644 index 4de1f1da9dc..00000000000 --- a/arch/arm/mach-nuc93x/clock.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/clock.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ - -#include <linux/clkdev.h> - -void nuc93x_clk_enable(struct clk *clk, int enable); -void clks_register(struct clk_lookup *clks, size_t num); - -struct clk { - unsigned long cken; - unsigned int enabled; - void (*enable)(struct clk *, int enable); -}; - -#define DEFINE_CLK(_name, _ctrlbit) \ -struct clk clk_##_name = { \ - .enable = nuc93x_clk_enable, \ - .cken = (1 << _ctrlbit), \ - } - -#define DEF_CLKLOOK(_clk, _devname, _conname) \ - { \ - .clk = _clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c deleted file mode 100644 index f6ff5d87354..00000000000 --- a/arch/arm/mach-nuc93x/cpu.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/cpu.c - * - * Copyright (c) 2009 Nuvoton corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * NUC93x series cpu common support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/serial_8250.h> -#include <linux/delay.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-serial.h> -#include <mach/regs-clock.h> -#include <mach/regs-ebi.h> - -#include "cpu.h" -#include "clock.h" - -/* Initial IO mappings */ - -static struct map_desc nuc93x_iodesc[] __initdata = { - IODESC_ENT(IRQ), - IODESC_ENT(GCR), - IODESC_ENT(UART), - IODESC_ENT(TIMER), - IODESC_ENT(EBI), -}; - -/* Initial nuc932 clock declarations. */ -static DEFINE_CLK(audio, 2); -static DEFINE_CLK(sd, 3); -static DEFINE_CLK(jpg, 4); -static DEFINE_CLK(video, 5); -static DEFINE_CLK(vpost, 6); -static DEFINE_CLK(2d, 7); -static DEFINE_CLK(gpu, 8); -static DEFINE_CLK(gdma, 9); -static DEFINE_CLK(adc, 10); -static DEFINE_CLK(uart, 11); -static DEFINE_CLK(spi, 12); -static DEFINE_CLK(pwm, 13); -static DEFINE_CLK(timer, 14); -static DEFINE_CLK(wdt, 15); -static DEFINE_CLK(ac97, 16); -static DEFINE_CLK(i2s, 16); -static DEFINE_CLK(usbck, 17); -static DEFINE_CLK(usb48, 18); -static DEFINE_CLK(usbh, 19); -static DEFINE_CLK(i2c, 20); -static DEFINE_CLK(ext, 0); - -static struct clk_lookup nuc932_clkregs[] = { - DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL), - DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL), - DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"), - DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"), - DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL), - DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL), - DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL), - DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"), - DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL), - DEF_CLKLOOK(&clk_uart, NULL, "uart"), - DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL), - DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL), - DEF_CLKLOOK(&clk_timer, NULL, "timer"), - DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL), - DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL), - DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL), - DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL), - DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL), - DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL), - DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL), - DEF_CLKLOOK(&clk_ext, NULL, "ext"), -}; - -/* Initial serial platform data */ - -struct plat_serial8250_port nuc93x_uart_data[] = { - NUC93X_8250PORT(UART0), - {}, -}; - -struct platform_device nuc93x_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = nuc93x_uart_data, - }, -}; - -/*Init NUC93x evb io*/ - -void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size) -{ - unsigned long idcode = 0x0; - - iotable_init(mach_desc, mach_size); - iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc)); - - idcode = __raw_readl(NUC93XPDID); - if (idcode == NUC932_CPUID) - printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode); - else - printk(KERN_ERR "CPU type detect error!\n"); - -} - -/*Init NUC93x clock*/ - -void __init nuc93x_init_clocks(void) -{ - clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs)); -} - diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h deleted file mode 100644 index 9def28197bc..00000000000 --- a/arch/arm/mach-nuc93x/cpu.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-nuc93x/cpu.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Header file for NUC93X CPU support - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define IODESC_ENT(y) \ -{ \ - .virtual = (unsigned long)NUC93X_VA_##y, \ - .pfn = __phys_to_pfn(NUC93X_PA_##y), \ - .length = NUC93X_SZ_##y, \ - .type = MT_DEVICE, \ -} - -#define NUC93X_8250PORT(name) \ -{ \ - .membase = name##_BA, \ - .mapbase = name##_PA, \ - .irq = IRQ_##name, \ - .uartclk = 57139200, \ - .regshift = 2, \ - .iotype = UPIO_MEM, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ -} - -/*Cpu identifier register*/ - -#define NUC93XPDID NUC93X_VA_GCR -#define NUC932_CPUID 0x29550091 - -/* extern file from cpu.c */ - -extern void nuc93x_clock_source(struct device *dev, unsigned char *src); -extern void nuc93x_init_clocks(void); -extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size); -extern void nuc93x_board_init(struct platform_device **device, int size); -extern struct platform_device nuc93x_serial_device; - diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c deleted file mode 100644 index a962ae9578d..00000000000 --- a/arch/arm/mach-nuc93x/dev.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/dev.c - * - * Copyright (C) 2009 Nuvoton corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach-types.h> - -#include "cpu.h" - -/*Here should be your evb resourse,such as LCD*/ - -static struct platform_device *nuc93x_public_dev[] __initdata = { - &nuc93x_serial_device, -}; - -/* Provide adding specific CPU platform devices API */ - -void __init nuc93x_board_init(struct platform_device **device, int size) -{ - platform_add_devices(device, size); - platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev)); -} - diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S deleted file mode 100644 index 1352cbda379..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/entry-macro.S - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - */ - -#include <mach/hardware.h> -#include <mach/regs-irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #AIC_BA - - ldr \irqnr, [ \base, #AIC_IPER] - ldr \irqnr, [ \base, #AIC_ISNR] - cmp \irqnr, #0 - - .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h deleted file mode 100644 index fb5c6fcb142..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/hardware.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/hardware.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include <mach/map.h> - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h deleted file mode 100644 index 72e5051c753..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/io.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * 1:1 mapping for ioremapped regions. - */ - -#define __mem_pci(a) (a) -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h deleted file mode 100644 index 7c4aa71edb4..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/irqs.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/irqs.h - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define NUC93X_IRQ(x) (x) - -/* Main cpu interrupts */ - -#define IRQ_WDT NUC93X_IRQ(1) -#define IRQ_IRQ0 NUC93X_IRQ(2) -#define IRQ_IRQ1 NUC93X_IRQ(3) -#define IRQ_IRQ2 NUC93X_IRQ(4) -#define IRQ_IRQ3 NUC93X_IRQ(5) -#define IRQ_USBH NUC93X_IRQ(6) -#define IRQ_APU NUC93X_IRQ(7) -#define IRQ_VPOST NUC93X_IRQ(8) -#define IRQ_ADC NUC93X_IRQ(9) -#define IRQ_UART0 NUC93X_IRQ(10) -#define IRQ_TIMER0 NUC93X_IRQ(11) -#define IRQ_GPU0 NUC93X_IRQ(12) -#define IRQ_GPU1 NUC93X_IRQ(13) -#define IRQ_GPU2 NUC93X_IRQ(14) -#define IRQ_GPU3 NUC93X_IRQ(15) -#define IRQ_GPU4 NUC93X_IRQ(16) -#define IRQ_VIN NUC93X_IRQ(17) -#define IRQ_USBD NUC93X_IRQ(18) -#define IRQ_VRAMLD NUC93X_IRQ(19) -#define IRQ_GDMA0 NUC93X_IRQ(20) -#define IRQ_GDMA1 NUC93X_IRQ(21) -#define IRQ_SDIO NUC93X_IRQ(22) -#define IRQ_FMI NUC93X_IRQ(22) -#define IRQ_JPEG NUC93X_IRQ(23) -#define IRQ_SPI0 NUC93X_IRQ(24) -#define IRQ_SPI1 NUC93X_IRQ(25) -#define IRQ_RTC NUC93X_IRQ(26) -#define IRQ_PWM0 NUC93X_IRQ(27) -#define IRQ_PWM1 NUC93X_IRQ(28) -#define IRQ_PWM2 NUC93X_IRQ(29) -#define IRQ_PWM3 NUC93X_IRQ(30) -#define IRQ_I2SAC97 NUC93X_IRQ(31) -#define IRQ_CAP0 IRQ_PWM0 -#define IRQ_CAP1 IRQ_PWM1 -#define IRQ_CAP2 IRQ_PWM2 -#define IRQ_CAP3 IRQ_PWM3 -#define NR_IRQS (IRQ_I2SAC97 + 1) - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h deleted file mode 100644 index fd0b5e89f0e..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/map.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/map.h - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H - -#define MAP_OFFSET (0xfff00000) -#define CLK_OFFSET (0x10) - -#ifndef __ASSEMBLY__ -#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET)))) -#else -#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET))) -#endif - - /* - * nuc932 hardware register definition - */ - -#define NUC93X_PA_IRQ (0xFFF83000) -#define NUC93X_PA_GCR (0xFFF00000) -#define NUC93X_PA_EBI (0xFFF01000) -#define NUC93X_PA_UART (0xFFF80000) -#define NUC93X_PA_TIMER (0xFFF81000) -#define NUC93X_PA_GPIO (0xFFF84000) -#define NUC93X_PA_GDMA (0xFFF03000) -#define NUC93X_PA_USBHOST (0xFFF0d000) -#define NUC93X_PA_I2C (0xFFF89000) -#define NUC93X_PA_LCD (0xFFF06000) -#define NUC93X_PA_GE (0xFFF05000) -#define NUC93X_PA_ADC (0xFFF85000) -#define NUC93X_PA_RTC (0xFFF87000) -#define NUC93X_PA_PWM (0xFFF82000) -#define NUC93X_PA_ACTL (0xFFF0a000) -#define NUC93X_PA_USBDEV (0xFFF0C000) -#define NUC93X_PA_JEPEG (0xFFF0e000) -#define NUC93X_PA_CACHE_T (0xFFF60000) -#define NUC93X_PA_VRAM (0xFFF0b000) -#define NUC93X_PA_DMAC (0xFFF09000) -#define NUC93X_PA_I2SM (0xFFF08000) -#define NUC93X_PA_CACHE (0xFFF02000) -#define NUC93X_PA_GPU (0xFFF04000) -#define NUC93X_PA_VIDEOIN (0xFFF07000) -#define NUC93X_PA_SPI0 (0xFFF86000) -#define NUC93X_PA_SPI1 (0xFFF88000) - - /* - * nuc932 virtual address mapping. - * interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ - -#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000) -#define NUC93X_SZ_IRQ SZ_4K - -#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ) -#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET) -#define NUC93X_SZ_GCR SZ_4K - -/* EBI management */ - -#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI) -#define NUC93X_SZ_EBI SZ_4K - -/* UARTs */ - -#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART) -#define NUC93X_SZ_UART SZ_4K - -/* Timers */ - -#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER) -#define NUC93X_SZ_TIMER SZ_4K - -/* GPIO ports */ - -#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO) -#define NUC93X_SZ_GPIO SZ_4K - -/* GDMA control */ - -#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA) -#define NUC93X_SZ_GDMA SZ_4K - -/* I2C hardware controller */ - -#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C) -#define NUC93X_SZ_I2C SZ_4K - -/* LCD controller*/ - -#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD) -#define NUC93X_SZ_LCD SZ_4K - -/* 2D controller*/ - -#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE) -#define NUC93X_SZ_GE SZ_4K - -/* ADC */ - -#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC) -#define NUC93X_SZ_ADC SZ_4K - -/* RTC */ - -#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC) -#define NUC93X_SZ_RTC SZ_4K - -/* Pulse Width Modulation(PWM) Registers */ - -#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM) -#define NUC93X_SZ_PWM SZ_4K - -/* Audio Controller controller */ - -#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL) -#define NUC93X_SZ_ACTL SZ_4K - -/* USB Device port */ - -#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV) -#define NUC93X_SZ_USBDEV SZ_4K - -/* USB host controller*/ -#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST) -#define NUC93X_SZ_USBHOST SZ_4K - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h deleted file mode 100644 index 5cb2954fbec..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/regs-clock.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/regs-clock.h - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H - -/* Clock Control Registers */ -#define CLK_BA NUC93X_VA_CLKPWR -#define REG_CLKEN (CLK_BA + 0x00) -#define REG_CLKSEL (CLK_BA + 0x04) -#define REG_CLKDIV (CLK_BA + 0x08) -#define REG_PLLCON0 (CLK_BA + 0x0C) -#define REG_PLLCON1 (CLK_BA + 0x10) -#define REG_PMCON (CLK_BA + 0x14) -#define REG_IRQWAKECON (CLK_BA + 0x18) -#define REG_IRQWAKEFLAG (CLK_BA + 0x1C) -#define REG_IPSRST (CLK_BA + 0x20) -#define REG_CLKEN1 (CLK_BA + 0x24) -#define REG_CLKDIV1 (CLK_BA + 0x28) - -/* Define PLL freq setting */ -#define PLL_DISABLE 0x12B63 -#define PLL_66MHZ 0x2B63 -#define PLL_100MHZ 0x4F64 -#define PLL_120MHZ 0x4F63 -#define PLL_166MHZ 0x4124 -#define PLL_200MHZ 0x4F24 - -/* Define AHB:CPUFREQ ratio */ -#define AHB_CPUCLK_1_1 0x00 -#define AHB_CPUCLK_1_2 0x01 -#define AHB_CPUCLK_1_4 0x02 -#define AHB_CPUCLK_1_8 0x03 - -/* Define APB:AHB ratio */ -#define APB_AHB_1_2 0x01 -#define APB_AHB_1_4 0x02 -#define APB_AHB_1_8 0x03 - -/* Define clock skew */ -#define DEFAULTSKEW 0x48 - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h deleted file mode 100644 index 3c72550e28e..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/regs-ebi.h - * - * Copyright (c) 2009 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __ASM_ARCH_REGS_EBI_H -#define __ASM_ARCH_REGS_EBI_H - -/* EBI Control Registers */ - -#define EBI_BA NUC93X_VA_EBI -#define REG_EBICON (EBI_BA + 0x00) -#define REG_ROMCON (EBI_BA + 0x04) -#define REG_SDCONF0 (EBI_BA + 0x08) -#define REG_SDCONF1 (EBI_BA + 0x0C) -#define REG_SDTIME0 (EBI_BA + 0x10) -#define REG_SDTIME1 (EBI_BA + 0x14) -#define REG_EXT0CON (EBI_BA + 0x18) -#define REG_EXT1CON (EBI_BA + 0x1C) -#define REG_EXT2CON (EBI_BA + 0x20) -#define REG_EXT3CON (EBI_BA + 0x24) -#define REG_EXT4CON (EBI_BA + 0x28) -#define REG_CKSKEW (EBI_BA + 0x2C) - -#endif /* __ASM_ARCH_REGS_EBI_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h deleted file mode 100644 index 23021592de5..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/regs-irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/regs-irq.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H - -/* Advance Interrupt Controller (AIC) Registers */ - -#define AIC_BA NUC93X_VA_IRQ - -#define REG_AIC_IRQSC (AIC_BA+0x80) -#define REG_AIC_GEN (AIC_BA+0x84) -#define REG_AIC_GASR (AIC_BA+0x88) -#define REG_AIC_GSCR (AIC_BA+0x8C) -#define REG_AIC_IRSR (AIC_BA+0x100) -#define REG_AIC_IASR (AIC_BA+0x104) -#define REG_AIC_ISR (AIC_BA+0x108) -#define REG_AIC_IPER (AIC_BA+0x10C) -#define REG_AIC_ISNR (AIC_BA+0x110) -#define REG_AIC_IMR (AIC_BA+0x114) -#define REG_AIC_OISR (AIC_BA+0x118) -#define REG_AIC_MECR (AIC_BA+0x120) -#define REG_AIC_MDCR (AIC_BA+0x124) -#define REG_AIC_SSCR (AIC_BA+0x128) -#define REG_AIC_SCCR (AIC_BA+0x12C) -#define REG_AIC_EOSCR (AIC_BA+0x130) -#define AIC_IPER (0x10C) -#define AIC_ISNR (0x110) - -#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h deleted file mode 100644 index 767a047a8bc..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/regs-serial.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/regs-serial.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define UART0_BA NUC93X_VA_UART -#define UART1_BA (NUC93X_VA_UART+0x100) - -#define UART0_PA NUC93X_PA_UART -#define UART1_PA (NUC93X_PA_UART+0x100) - - -#ifndef __ASSEMBLY__ - -struct nuc93x_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; - -struct nuc93x_uartcfg { - unsigned char hwport; - unsigned char unused; - unsigned short flags; - unsigned long uart_flags; - - unsigned long ucon; - unsigned long ulcon; - unsigned long ufcon; - - struct nuc93x_uart_clksrc *clocks; - unsigned int clocks_size; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h deleted file mode 100644 index 394be9614d3..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/regs-timer.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/regs-timer.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H - -/* Timer Registers */ - -#define TMR_BA NUC93X_VA_TIMER -#define REG_TCSR0 (TMR_BA+0x00) -#define REG_TICR0 (TMR_BA+0x08) -#define REG_TDR0 (TMR_BA+0x10) -#define REG_TISR (TMR_BA+0x18) -#define REG_WTCR (TMR_BA+0x1C) - -#endif /* __ASM_ARCH_REGS_TIMER_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h deleted file mode 100644 index d26bd9a5284..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/machnuc93x/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <asm/proc-fns.h> - -static void arch_idle(void) -{ -} - -static void arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h deleted file mode 100644 index 0c719cc91aa..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h deleted file mode 100644 index 381cb9baadd..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/uncompress.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -/* Defines for UART registers */ - -#include <mach/regs-serial.h> -#include <mach/map.h> -#include <linux/serial_reg.h> - -#define arch_decomp_wdog() - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) -static u32 * const uart_base = (u32 *)UART0_PA; - -static void putc(int ch) -{ - /* Check THRE and TEMT bits before we transmit the character. - */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - - *uart_base = ch; -} - -static inline void flush(void) -{ -} - -static void arch_decomp_setup(void) -{ -} - -#endif/* __ASM_NUC93X_UNCOMPRESS_H */ diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h deleted file mode 100644 index 7d11a5f0769..00000000000 --- a/arch/arm/mach-nuc93x/include/mach/vmalloc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-nuc93x/include/mach/vmalloc.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xE0000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c deleted file mode 100644 index aa279f23e34..00000000000 --- a/arch/arm/mach-nuc93x/irq.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/irq.c - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-irq.h> - -static void nuc93x_irq_mask(struct irq_data *d) -{ - __raw_writel(1 << d->irq, REG_AIC_MDCR); -} - -/* - * By the w90p910 spec,any irq,only write 1 - * to REG_AIC_EOSCR for ACK - */ - -static void nuc93x_irq_ack(struct irq_data *d) -{ - __raw_writel(0x01, REG_AIC_EOSCR); -} - -static void nuc93x_irq_unmask(struct irq_data *d) -{ - __raw_writel(1 << d->irq, REG_AIC_MECR); - -} - -static struct irq_chip nuc93x_irq_chip = { - .irq_ack = nuc93x_irq_ack, - .irq_mask = nuc93x_irq_mask, - .irq_unmask = nuc93x_irq_unmask, -}; - -void __init nuc93x_init_irq(void) -{ - int irqno; - - __raw_writel(0xFFFFFFFE, REG_AIC_MDCR); - - for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) { - irq_set_chip_and_handler(irqno, &nuc93x_irq_chip, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } -} diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c deleted file mode 100644 index 1f741b1c160..00000000000 --- a/arch/arm/mach-nuc93x/mach-nuc932evb.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/arch/arm/mach-w90x900/mach-nuc910evb.c - * - * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche - * - * Copyright (C) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/platform_device.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach-types.h> -#include <mach/map.h> - -#include "nuc932.h" - -static void __init nuc932evb_map_io(void) -{ - nuc932_map_io(); - nuc932_init_clocks(); - nuc932_init_uartclk(); -} - -static void __init nuc932evb_init(void) -{ - nuc932_board_init(); -} - -MACHINE_START(NUC932EVB, "NUC932EVB") - /* Maintainer: Wan ZongShun */ - .map_io = nuc932evb_map_io, - .init_irq = nuc93x_init_irq, - .init_machine = nuc932evb_init, - .timer = &nuc93x_timer, -MACHINE_END diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c deleted file mode 100644 index 3966ead686f..00000000000 --- a/arch/arm/mach-nuc93x/nuc932.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/nuc932.c - * - * Copyright (c) 2009 Nuvoton corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * NUC932 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/mach/map.h> -#include <mach/hardware.h> - -#include "cpu.h" -#include "clock.h" - -/* define specific CPU platform device */ - -static struct platform_device *nuc932_dev[] __initdata = { -}; - -/* define specific CPU platform io map */ - -static struct map_desc nuc932evb_iodesc[] __initdata = { -}; - -/*Init NUC932 evb io*/ - -void __init nuc932_map_io(void) -{ - nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc)); -} - -/*Init NUC932 clock*/ - -void __init nuc932_init_clocks(void) -{ - nuc93x_init_clocks(); -} - -/*enable NUC932 uart clock*/ - -void __init nuc932_init_uartclk(void) -{ - struct clk *ck_uart = clk_get(NULL, "uart"); - BUG_ON(IS_ERR(ck_uart)); - - clk_enable(ck_uart); -} - -/*Init NUC932 board info*/ - -void __init nuc932_board_init(void) -{ - nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev)); -} diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h deleted file mode 100644 index 9a66edd5338..00000000000 --- a/arch/arm/mach-nuc93x/nuc932.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-nuc93x/nuc932.h - * - * Copyright (c) 2008 Nuvoton corporation - * - * Header file for NUC93x CPU support - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc93x_init_irq(void); -extern struct sys_timer nuc93x_timer; - -/* extern file from nuc932.c */ - -extern void nuc932_board_init(void); -extern void nuc932_init_clocks(void); -extern void nuc932_map_io(void); -extern void nuc932_init_uartclk(void); diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c deleted file mode 100644 index 2f90f9dc6e3..00000000000 --- a/arch/arm/mach-nuc93x/time.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mach-nuc93x/time.c - * - * Copyright (c) 2009 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> - -#include <asm/mach-types.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -#include <mach/system.h> -#include <mach/map.h> -#include <mach/regs-timer.h> - -#define RESETINT 0x01 -#define PERIOD (0x01 << 27) -#define ONESHOT (0x00 << 27) -#define COUNTEN (0x01 << 30) -#define INTEN (0x01 << 29) - -#define TICKS_PER_SEC 100 -#define PRESCALE 0x63 /* Divider = prescale + 1 */ - -unsigned int timer0_load; - -static unsigned long nuc93x_gettimeoffset(void) -{ - return 0; -} - -/*IRQ handler for the timer*/ - -static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - __raw_writel(0x01, REG_TISR); /* clear TIF0 */ - return IRQ_HANDLED; -} - -static struct irqaction nuc93x_timer_irq = { - .name = "nuc93x Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = nuc93x_timer_interrupt, -}; - -/*Set up timer reg.*/ - -static void nuc93x_timer_setup(void) -{ - struct clk *ck_ext = clk_get(NULL, "ext"); - struct clk *ck_timer = clk_get(NULL, "timer"); - unsigned int rate, val = 0; - - BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer)); - - clk_enable(ck_timer); - rate = clk_get_rate(ck_ext); - clk_put(ck_ext); - rate = rate / (PRESCALE + 0x01); - - /* set a known state */ - __raw_writel(0x00, REG_TCSR0); - __raw_writel(RESETINT, REG_TISR); - - timer0_load = (rate / TICKS_PER_SEC); - __raw_writel(timer0_load, REG_TICR0); - - val |= (PERIOD | COUNTEN | INTEN | PRESCALE);; - __raw_writel(val, REG_TCSR0); - -} - -static void __init nuc93x_timer_init(void) -{ - nuc93x_timer_setup(); - setup_irq(IRQ_TIMER0, &nuc93x_timer_irq); -} - -struct sys_timer nuc93x_timer = { - .init = nuc93x_timer_init, - .offset = nuc93x_gettimeoffset, - .resume = nuc93x_timer_setup -}; diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot index 292d56c5a88..13bda8dbd60 100644 --- a/arch/arm/mach-omap1/Makefile.boot +++ b/arch/arm/mach-omap1/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index eb36b25450a..1f1db76d704 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -30,7 +30,6 @@ #include <plat/io.h> #include <plat/board-ams-delta.h> -#include <mach/gpio.h> #include <plat/keypad.h> #include <plat/mux.h> #include <plat/usb.h> @@ -135,12 +134,6 @@ void ams_delta_latch2_write(u16 mask, u16 value) *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; } -static void __init ams_delta_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { @@ -379,17 +372,13 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); -static void __init ams_delta_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ .atag_offset = 0x100, - .map_io = ams_delta_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = ams_delta_init_irq, + .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 999789c4811..23178275f96 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> @@ -297,6 +296,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = { static void __init omap_fsample_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + fsample_init_smc91x(); if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -326,12 +358,6 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_fsample_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_fsample_io_desc[] __initdata = { { @@ -350,49 +376,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = { static void __init omap_fsample_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); iotable_init(omap_fsample_io_desc, ARRAY_SIZE(omap_fsample_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ .atag_offset = 0x100, .map_io = omap_fsample_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_fsample_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23cc9e4ad50..dc5b75de531 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -22,18 +22,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> -static void __init omap_generic_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* assume no Mini-AB port */ #ifdef CONFIG_ARCH_OMAP15XX @@ -87,17 +80,13 @@ static void __init omap_generic_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_generic_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren <tony@atomide.com> */ .atag_offset = 0x100, - .map_io = omap_generic_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_generic_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index f2fc43d8382..da0e37d4082 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 6c70c28d055..b334b148167 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -18,7 +18,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -32,7 +32,6 @@ #include <linux/smc91x.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -373,12 +372,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { }, }; -static void __init h2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, @@ -454,17 +447,13 @@ static void __init h2_init(void) h2_mmc_init(); } -static void __init h2_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ .atag_offset = 0x100, - .map_io = h2_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h2_init_irq, + .init_irq = omap1_init_irq, .init_machine = h2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 2098525e7cc..f8242aa9b76 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -11,13 +11,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c/tps65010.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 8e2b64a4692..74ebe72c984 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -13,7 +13,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/types.h> #include <linux/init.h> #include <linux/major.h> @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/page.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -436,23 +435,13 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init h3_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .atag_offset = 0x100, - .map_io = h3_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h3_init_irq, + .init_irq = omap1_init_irq, .init_machine = h3_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index e81ead1c89e..3e91baab1a8 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -23,7 +23,6 @@ * 02110-1301, USA. * */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -500,7 +499,7 @@ static void __init htcherald_lcd_init(void) static void __init htcherald_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); /* * The LCD panel must be disabled and DMA turned off here, as doing @@ -601,20 +600,14 @@ static void __init htcherald_init(void) #endif } -static void __init htcherald_init_irq(void) -{ - printk(KERN_INFO "htcherald_init_irq.\n"); - omap1_init_common_hw(); - omap1_init_irq(); -} - MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ /* Maintainer: wing-linux.sourceforge.net */ .atag_offset = 0x100, .map_io = htcherald_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = htcherald_init_irq, + .init_irq = omap1_init_irq, .init_machine = htcherald_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 8b034594fbc..273153dba15 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -15,7 +15,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,7 +34,6 @@ #include <plat/mux.h> #include <plat/flash.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> @@ -289,12 +288,6 @@ static void __init innovator_init_smc91x(void) } } -static void __init innovator_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ @@ -439,30 +432,32 @@ static void __init innovator_init(void) innovator_mmc_init(); } +/* + * REVISIT: Assume 15xx for now, we don't want to do revision check + * until later on. The right way to fix this is to set up a different + * machine_id for 16xx Innovator, or use device tree. + */ static void __init innovator_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - printk("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); - } -#endif + iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); + udelay(10); /* Delay needed for FPGA */ + + /* Dump the Innovator FPGA rev early - useful info for support. */ + pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", + fpga_read(OMAP1510_FPGA_REV_HIGH), + fpga_read(OMAP1510_FPGA_REV_LOW), + fpga_read(OMAP1510_FPGA_BOARD_REV)); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ .atag_offset = 0x100, .map_io = innovator_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = innovator_init_irq, + .init_irq = omap1_init_irq, .init_machine = innovator_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 6825635ac68..6798b848831 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> @@ -26,7 +26,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> @@ -39,21 +38,6 @@ #define ADS7846_PENDOWN_GPIO 15 -static void __init omap_nokia770_init_irq(void) -{ - /* On Nokia 770, the SleepX signal is masked with an - * MPUIO line by default. It has to be unmasked for it - * to become functional */ - - /* SleepX mask direction */ - omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); - /* Unmask SleepX signal */ - omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); - - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int nokia770_keymap[] = { KEY(1, 0, GROUP_0 | KEY_UP), KEY(2, 0, GROUP_1 | KEY_F5), @@ -246,6 +230,15 @@ static inline void nokia770_mmc_init(void) static void __init omap_nokia770_init(void) { + /* On Nokia 770, the SleepX signal is masked with an + * MPUIO line by default. It has to be unmasked for it + * to become functional */ + + /* SleepX mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask SleepX signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); @@ -258,16 +251,12 @@ static void __init omap_nokia770_init(void) nokia770_mmc_init(); } -static void __init omap_nokia770_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, - .map_io = omap_nokia770_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_nokia770_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 44b8e9362bf..c3859278d25 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -25,7 +25,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -42,7 +42,6 @@ #include <linux/i2c/tps65010.h> #include <mach/hardware.h> -#include <asm/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -279,12 +278,6 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } -static void __init osk_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -576,17 +569,13 @@ static void __init osk_init(void) osk_mistral_init(); } -static void __init osk_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ .atag_offset = 0x100, - .map_io = osk_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = osk_init_irq, + .init_irq = omap1_init_irq, .init_machine = osk_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 3d8cd90b1db..f9c44cb15b4 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -16,7 +16,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -33,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -59,12 +58,6 @@ #define PALMTE_MMC2_GPIO OMAP_MPUIO(7) #define PALMTE_MMC3_GPIO OMAP_MPUIO(11) -static void __init omap_palmte_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmte_keymap[] = { KEY(0, 0, KEY_F1), /* Calendar */ KEY(1, 0, KEY_F2), /* Contacts */ @@ -269,16 +262,12 @@ static void __init omap_palmte_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmte_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, - .map_io = omap_palmte_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmte_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index d0eefe81cd1..11a98539f7b 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -12,6 +12,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -30,7 +31,6 @@ #include <asm/mach/map.h> #include <plat/led.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { } }; -static void __init omap_palmtt_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config palmtt_usb_config __initdata = { .register_dev = 1, .hmc_mode = 0, @@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmtt_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, - .map_io = omap_palmtt_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmtt_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 98e79bc0921..c6fe61dfe85 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -15,6 +15,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -32,7 +33,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> @@ -57,13 +57,6 @@ #define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) #define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) -static void __init -omap_palmz71_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmz71_keymap[] = { KEY(0, 0, KEY_F1), KEY(1, 0, KEY_F2), @@ -334,17 +327,12 @@ omap_palmz71_init(void) palmz71_gpio_setup(0); } -static void __init -omap_palmz71_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, - .map_io = omap_palmz71_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmz71_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ad3a1567604..203ae07550d 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -28,7 +28,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> #include <plat/flash.h> @@ -265,6 +264,39 @@ static void __init perseus2_init_smc91x(void) static void __init omap_perseus2_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + perseus2_init_smc91x(); if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -294,11 +326,6 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_perseus2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -311,49 +338,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman <kjh@hilman.org> */ .atag_offset = 0x100, .map_io = omap_perseus2_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_perseus2_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index e8ddd86e3fd..b59f78850e6 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -12,11 +12,11 @@ * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/platform_device.h> #include <mach/hardware.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 602b55c39d3..667a7cbdb11 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -14,7 +14,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/dma.h> @@ -407,24 +406,13 @@ static void __init omap_sx1_init(void) gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ } -/*----------------------------------------*/ -static void __init omap_sx1_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} -/*----------------------------------------*/ - -static void __init omap_sx1_map_io(void) -{ - omap1_map_common_io(); -} MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, - .map_io = omap_sx1_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_sx1_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 80165154617..2a6545ba61c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -33,7 +34,6 @@ #include <plat/board-voiceblue.h> #include <plat/common.h> -#include <mach/gpio.h> #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> @@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { static struct omap_board_config_kernel voiceblue_config[] = { }; -static void __init voiceblue_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init voiceblue_map_io(void) -{ - omap1_map_common_io(); -} - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -302,9 +291,10 @@ static void __init voiceblue_init(void) MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ .atag_offset = 0x100, - .map_io = voiceblue_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = voiceblue_init_irq, + .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36f26c3fa25..48ef9888e82 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -10,6 +10,7 @@ */ #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,10 +22,10 @@ #include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/common.h> #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/omap7xx.h> #include <plat/mcbsp.h> @@ -291,6 +292,8 @@ static int __init omap1_init_devices(void) if (!cpu_class_is_omap1()) return -ENODEV; + omap_sram_init(); + /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index cddbf8b089c..0a17a1a7e00 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -17,6 +17,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> @@ -28,7 +29,6 @@ #include <asm/mach/irq.h> #include <plat/fpga.h> -#include <mach/gpio.h> static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 1cfa1b6bb62..7969cfda445 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -21,7 +21,6 @@ #include "clock.h" extern void omap_check_revision(void); -extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -85,51 +84,45 @@ static struct map_desc omap16xx_io_desc[] __initdata = { #endif /* - * Maps common IO regions for omap1. This should only get called from - * board specific init. + * Maps common IO regions for omap1 */ -void __init omap1_map_common_io(void) +static void __init omap1_map_common_io(void) { iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_omapxxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - omap_check_revision(); +} #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); - } +void __init omap7xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); +} #endif + #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); - } +void __init omap15xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); +} #endif - omap_sram_init(); - omap_init_consistent_dma_size(); +#if defined(CONFIG_ARCH_OMAP16XX) +void __init omap16xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } +#endif /* - * Common low-level hardware init for omap1. This should only get called from - * board specific init. + * Common low-level hardware init for omap1. */ -void __init omap1_init_common_hw(void) +void omap1_init_early(void) { + omap_check_revision(); + omap_ioremap_init(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -139,8 +132,8 @@ void __init omap1_init_common_hw(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); - omap1_mux_init(); + omap_init_consistent_dma_size(); } /* diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index e2b9c901ab6..e5b104b7fce 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -35,7 +35,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> @@ -45,7 +45,6 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> #include <plat/cpu.h> #define IRQ_BANK(irq) ((irq) >> 5) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index b4f9be52e1e..4b818eb9f91 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -9,6 +9,7 @@ * The "surfer" expansion board and H2 sample board also have two-color * green+red LEDs (in parallel), used here for timer and idle indicators. */ +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> @@ -20,7 +21,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 499d7ad8697..da09f436497 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -3,14 +3,13 @@ * * LED driver for OSK with optional Mistral QVGA board */ +#include <linux/gpio.h> #include <linux/init.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <mach/gpio.h> - #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 22eb11dde9e..ae6dd93b8dd 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -3,13 +3,13 @@ * * OMAP LEDs dispatcher */ +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <mach/gpio.h> #include <plat/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 943072d5a1d..7868e75ad07 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/mutex.h> #include <linux/clk.h> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 550ca9d9991..93ae8f29727 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +24,6 @@ #include <plat/board.h> #include <plat/mux.h> -#include <mach/gpio.h> #include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e0a318df95b..497e9dc2795 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -36,6 +36,7 @@ config ARCH_OMAP3 select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM + select ARM_CPU_SUSPEND if PM config ARCH_OMAP4 bool "TI OMAP4" @@ -50,6 +51,7 @@ config ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select USB_ARCH_HAS_EHCI + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 512978586b2..69ab1c06913 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -221,16 +221,12 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o -obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ - omap_phy_internal.o -obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ - omap_phy_internal.o +obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o +obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \ - omap_phy_internal.o +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o -obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \ - omap_phy_internal.o +obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o @@ -250,6 +246,8 @@ obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o +obj-y += omap_phy_internal.o + obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o obj-y += usb-host.o diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 565aff7f37a..b03e562acc6 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 638cecb9ea1..d704f0ac328 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -39,6 +39,9 @@ #include <plat/usb.h> #include <plat/gpmc-smc91x.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> + #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -99,20 +102,72 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct platform_device sdp2430_lcd_device = { - .name = "sdp2430_lcd", - .id = -1, -}; - static struct platform_device *sdp2430_devices[] __initdata = { &sdp2430_flash_device, +}; + +/* LCD */ +#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 +#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 + +static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1); + + return 0; +} + +static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0); +} + +static struct panel_generic_dpi_data sdp2430_panel_data = { + .name = "nec_nl2432dr22-11b", + .platform_enable = sdp2430_panel_enable_lcd, + .platform_disable = sdp2430_panel_disable_lcd, +}; + +static struct omap_dss_device sdp2430_lcd_device = { + .name = "lcd", + .driver_name = "generic_dpi_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .data = &sdp2430_panel_data, +}; + +static struct omap_dss_device *sdp2430_dss_devices[] = { &sdp2430_lcd_device, }; -static struct omap_lcd_config sdp2430_lcd_config __initdata = { - .ctrl_name = "internal", +static struct omap_dss_board_info sdp2430_dss_data = { + .num_devices = ARRAY_SIZE(sdp2430_dss_devices), + .devices = sdp2430_dss_devices, + .default_device = &sdp2430_lcd_device, }; +static void __init sdp2430_display_init(void) +{ + int r; + + static struct gpio gpios[] __initdata = { + { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "LCD reset" }, + { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, + "LCD Backlight" }, + }; + + r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (r) { + pr_err("Cannot request LCD GPIOs, error %d\n", r); + return; + } + + omap_display_init(&sdp2430_dss_data); +} + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) static struct omap_smc91x_platform_data board_smc91x_data = { @@ -137,10 +192,6 @@ static inline void board_smc91x_init(void) #endif -static struct omap_board_config_kernel sdp2430_config[] __initdata = { - {OMAP_TAG_LCD, &sdp2430_lcd_config}, -}; - static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -223,9 +274,6 @@ static void __init omap_2430sdp_init(void) { omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); - omap_board_config = sdp2430_config; - omap_board_config_size = ARRAY_SIZE(sdp2430_config); - omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); @@ -242,6 +290,8 @@ static void __init omap_2430sdp_init(void) /* Turn off secondary LCD backlight */ gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, "Secondary LCD backlight"); + + sdp2430_display_init(); } MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5b5999caf71..77142c13fa1 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -37,7 +37,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc-smc91x.h> @@ -186,8 +186,7 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = sdp3430_panel_enable_dvi, .platform_disable = sdp3430_panel_disable_dvi, }; @@ -195,7 +194,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 6d2b61409c1..515646886b5 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -38,6 +38,8 @@ #include <plat/mmc.h> #include <plat/omap4-keypad.h> #include <video/omapdss.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include "mux.h" @@ -52,6 +54,8 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -340,11 +344,6 @@ static int __init omap_ethernet_init(void) return status; } -static struct platform_device sdp4430_lcd_device = { - .name = "sdp4430_lcd", - .id = -1, -}; - static struct regulator_consumer_supply sdp4430_vbat_supply[] = { REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"), REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"), @@ -374,21 +373,12 @@ static struct platform_device sdp4430_vbat = { }; static struct platform_device *sdp4430_devices[] __initdata = { - &sdp4430_lcd_device, &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, }; -static struct omap_lcd_config sdp4430_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel sdp4430_config[] __initdata = { - { OMAP_TAG_LCD, &sdp4430_lcd_config }, -}; - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, @@ -642,37 +632,202 @@ static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free(HDMI_GPIO_HPD); } -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .clocks = { - .dispc = { +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .clk_lane = 1, + .clk_pol = 0, + .data1_lane = 2, + .data1_pol = 0, + .data2_lane = 3, + .data2_pol = 0, + + .module = 0, + }, + + .clocks = { + .dispc = { + .channel = { + /* Logic Clock = 172.8 MHz */ + .lck_div = 1, + /* Pixel Clock = 34.56 MHz */ + .pck_div = 5, + .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC, + }, .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK, }, - .hdmi = { - .regn = 15, - .regm2 = 1, + + .dsi = { + .regn = 16, /* Fint = 2.4 MHz */ + .regm = 180, /* DDR Clock = 216 MHz */ + .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */ + .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */ + + .lp_clk_div = 10, /* LP Clock = 8.64 MHz */ + .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI, + }, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + .clk_lane = 1, + .clk_pol = 0, + .data1_lane = 2, + .data1_pol = 0, + .data2_lane = 3, + .data2_pol = 0, + + .module = 1, + }, + + .clocks = { + .dispc = { + .channel = { + /* Logic Clock = 172.8 MHz */ + .lck_div = 1, + /* Pixel Clock = 34.56 MHz */ + .pck_div = 5, + .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC, + }, + .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK, + }, + + .dsi = { + .regn = 16, /* Fint = 2.4 MHz */ + .regm = 180, /* DDR Clock = 216 MHz */ + .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */ + .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */ + + .lp_clk_div = 10, /* LP Clock = 8.64 MHz */ + .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI, }, }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static void sdp4430_lcd_init(void) +{ + int r; + + r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT, + "lcd1_reset_gpio"); + if (r) + pr_err("%s: Could not get lcd1_reset_gpio\n", __func__); + + r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT, + "lcd2_reset_gpio"); + if (r) + pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); +} + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, }; +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, &sdp4430_hdmi_device, + &sdp4430_picodlp_device, }; static struct omap_dss_board_info sdp4430_dss_data = { .num_devices = ARRAY_SIZE(sdp4430_dss_devices), .devices = sdp4430_dss_devices, - .default_device = &sdp4430_hdmi_device, + .default_device = &sdp4430_lcd_device, }; -void omap_4430sdp_display_init(void) +static void omap_4430sdp_display_init(void) { + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_lcd_init(); sdp4430_hdmi_mux_init(); + sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); } @@ -796,9 +951,6 @@ static void __init omap_4430sdp_init(void) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); - omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 65a5912278a..d314f033c9d 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -36,6 +36,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include "mux.h" #include "control.h" @@ -333,8 +334,7 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = am3517_evm_panel_enable_dvi, .platform_disable = am3517_evm_panel_disable_dvi, }; @@ -342,7 +342,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device am3517_evm_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 29c409b68b5..de8134b7f58 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -40,6 +40,9 @@ #include <plat/common.h> #include <plat/gpmc.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> + #include "mux.h" #include "control.h" @@ -149,11 +152,6 @@ static struct platform_device apollon_smc91x_device = { .resource = apollon_smc91x_resources, }; -static struct platform_device apollon_lcd_device = { - .name = "apollon_lcd", - .id = -1, -}; - static struct omap_led_config apollon_led_config[] = { { .cdev = { @@ -191,7 +189,6 @@ static struct platform_device apollon_led_device = { static struct platform_device *apollon_devices[] __initdata = { &apollon_onenand_device, &apollon_smc91x_device, - &apollon_lcd_device, &apollon_led_device, }; @@ -265,12 +262,26 @@ static struct omap_usb_config apollon_usb_config __initdata = { .pins[0] = 6, }; -static struct omap_lcd_config apollon_lcd_config __initdata = { - .ctrl_name = "internal", +static struct panel_generic_dpi_data apollon_panel_data = { + .name = "apollon", +}; + +static struct omap_dss_device apollon_lcd_device = { + .name = "lcd", + .driver_name = "generic_dpi_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 18, + .data = &apollon_panel_data, +}; + +static struct omap_dss_device *apollon_dss_devices[] = { + &apollon_lcd_device, }; -static struct omap_board_config_kernel apollon_config[] __initdata = { - { OMAP_TAG_LCD, &apollon_lcd_config }, +static struct omap_dss_board_info apollon_dss_data = { + .num_devices = ARRAY_SIZE(apollon_dss_devices), + .devices = apollon_dss_devices, + .default_device = &apollon_lcd_device, }; static struct gpio apollon_gpio_leds[] __initdata = { @@ -308,8 +319,6 @@ static void __init omap_apollon_init(void) u32 v; omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - omap_board_config = apollon_config; - omap_board_config_size = ARRAY_SIZE(apollon_config); apollon_init_smc91x(); apollon_led_init(); @@ -335,6 +344,7 @@ static void __init omap_apollon_init(void) platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); + omap_display_init(&apollon_dss_data); } MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 5665e688bd2..bd1bcacb40f 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -43,6 +43,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -242,8 +243,7 @@ static struct omap_dss_device cm_t35_lcd_device = { .phy.dpi.data_lines = 18, }; -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = cm_t35_panel_enable_dvi, .platform_disable = cm_t35_panel_disable_dvi, }; @@ -251,7 +251,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 556df32d88e..42918940c53 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -47,6 +47,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -139,7 +140,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { }; static struct panel_generic_dpi_data lcd_panel = { - .name = "generic", + .name = "innolux_at070tn83", .platform_enable = devkit8000_panel_enable_lcd, .platform_disable = devkit8000_panel_disable_lcd, }; @@ -152,8 +153,7 @@ static struct omap_dss_device devkit8000_lcd_device = { .phy.dpi.data_lines = 24, }; -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = devkit8000_panel_enable_dvi, .platform_disable = devkit8000_panel_disable_dvi, }; @@ -161,7 +161,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -267,7 +267,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index fe75c195f69..c12666ee701 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -40,6 +39,9 @@ #include <plat/dma.h> #include <plat/gpmc.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> + #include "mux.h" #include "control.h" @@ -157,17 +159,33 @@ static struct platform_device h4_kp_device = { }, }; -static struct platform_device h4_lcd_device = { - .name = "lcd_h4", - .id = -1, -}; - static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, &h4_kp_device, +}; + +static struct panel_generic_dpi_data h4_panel_data = { + .name = "h4", +}; + +static struct omap_dss_device h4_lcd_device = { + .name = "lcd", + .driver_name = "generic_dpi_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .data = &h4_panel_data, +}; + +static struct omap_dss_device *h4_dss_devices[] = { &h4_lcd_device, }; +static struct omap_dss_board_info h4_dss_data = { + .num_devices = ARRAY_SIZE(h4_dss_devices), + .devices = h4_dss_devices, + .default_device = &h4_lcd_device, +}; + /* 2420 Sysboot setup (2430 is different) */ static u32 get_sysboot_value(void) { @@ -271,10 +289,6 @@ static void __init h4_init_flash(void) h4_flash_resource.end = base + SZ_64M - 1; } -static struct omap_lcd_config h4_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct omap_usb_config h4_usb_config __initdata = { /* S1.10 OFF -- usb "download port" * usb0 switched to Mini-B port and isp1105 transceiver; @@ -286,10 +300,6 @@ static struct omap_usb_config h4_usb_config __initdata = { .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ }; -static struct omap_board_config_kernel h4_config[] __initdata = { - { OMAP_TAG_LCD, &h4_lcd_config }, -}; - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -320,9 +330,6 @@ static void __init omap_h4_init(void) { omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF); - omap_board_config = h4_config; - omap_board_config_size = ARRAY_SIZE(h4_config); - /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on @@ -362,6 +369,8 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + + omap_display_init(&h4_dss_data); } MACHINE_START(OMAP_H4, "OMAP2420 H4 board") diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e20cad6a083..d0a3f78a9b6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -32,7 +32,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/onenand.h> #include "mux.h" @@ -455,16 +455,16 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev) gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = igep2_enable_dvi, .platform_disable = igep2_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device igep2_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 0fa28be2cfd..e179da0c4da 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -34,7 +35,6 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <mach/gpio.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> @@ -44,6 +44,9 @@ #include <plat/usb.h> #include <plat/gpmc-smsc911x.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> + #include "board-flash.h" #include "mux.h" #include "hsmmc.h" @@ -180,23 +183,102 @@ static inline void __init ldp_init_smsc911x(void) gpmc_smsc911x_init(&smsc911x_cfg); } -static struct platform_device ldp_lcd_device = { - .name = "ldp_lcd", - .id = -1, +/* LCD */ + +static int ldp_backlight_gpio; +static int ldp_lcd_enable_gpio; + +#define LCD_PANEL_RESET_GPIO 55 +#define LCD_PANEL_QVGA_GPIO 56 + +static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(ldp_lcd_enable_gpio)) + gpio_direction_output(ldp_lcd_enable_gpio, 1); + if (gpio_is_valid(ldp_backlight_gpio)) + gpio_direction_output(ldp_backlight_gpio, 1); + + return 0; +} + +static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(ldp_lcd_enable_gpio)) + gpio_direction_output(ldp_lcd_enable_gpio, 0); + if (gpio_is_valid(ldp_backlight_gpio)) + gpio_direction_output(ldp_backlight_gpio, 0); +} + +static struct panel_generic_dpi_data ldp_panel_data = { + .name = "nec_nl2432dr22-11b", + .platform_enable = ldp_panel_enable_lcd, + .platform_disable = ldp_panel_disable_lcd, }; -static struct omap_lcd_config ldp_lcd_config __initdata = { - .ctrl_name = "internal", +static struct omap_dss_device ldp_lcd_device = { + .name = "lcd", + .driver_name = "generic_dpi_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 18, + .data = &ldp_panel_data, +}; + +static struct omap_dss_device *ldp_dss_devices[] = { + &ldp_lcd_device, }; -static struct omap_board_config_kernel ldp_config[] __initdata = { - { OMAP_TAG_LCD, &ldp_lcd_config }, +static struct omap_dss_board_info ldp_dss_data = { + .num_devices = ARRAY_SIZE(ldp_dss_devices), + .devices = ldp_dss_devices, + .default_device = &ldp_lcd_device, }; +static void __init ldp_display_init(void) +{ + int r; + + static struct gpio gpios[] __initdata = { + {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, + {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, + }; + + r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (r) { + pr_err("Cannot request LCD GPIOs, error %d\n", r); + return; + } + + omap_display_init(&ldp_dss_data); +} + +static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) +{ + int r; + + struct gpio gpios[] = { + {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, + {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, + }; + + r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (r) { + pr_err("Cannot request LCD GPIOs, error %d\n", r); + ldp_backlight_gpio = -EINVAL; + ldp_lcd_enable_gpio = -EINVAL; + return r; + } + + ldp_backlight_gpio = gpio + 15; + ldp_lcd_enable_gpio = gpio + 7; + + return 0; +} + static struct twl4030_gpio_platform_data ldp_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .setup = ldp_twl_gpio_setup, }; static struct regulator_consumer_supply ldp_vmmc1_supply[] = { @@ -238,10 +320,31 @@ static struct regulator_init_data ldp_vaux1 = { .consumer_supplies = ldp_vaux1_supplies, }; +static struct regulator_consumer_supply ldp_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + +static struct regulator_init_data ldp_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies), + .consumer_supplies = ldp_vpll2_supplies, +}; + static struct twl4030_platform_data ldp_twldata = { /* platform_data for children goes here */ .vmmc1 = &ldp_vmmc1, .vaux1 = &ldp_vaux1, + .vpll2 = &ldp_vpll2, .gpio = &ldp_gpio_data, .keypad = &ldp_kp_twl4030_data, }; @@ -267,7 +370,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_lcd_device, &ldp_gpio_keys_device, }; @@ -312,8 +414,6 @@ static struct mtd_partition ldp_nand_partitions[] = { static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = ldp_config; - omap_board_config_size = ARRAY_SIZE(ldp_config); ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); @@ -325,6 +425,7 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); omap2_hsmmc_init(mmc); + ldp_display_init(); } MACHINE_START(OMAP_LDP, "OMAP LDP board") diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 0b8e0fc03aa..70261bcda3f 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,7 +42,7 @@ #include <plat/board.h> #include <plat/common.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -203,16 +203,16 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value(dssdev->reset_gpio, 0); } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = beagle_enable_dvi, .platform_disable = beagle_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = -EINVAL, @@ -444,11 +444,6 @@ static struct platform_device keys_gpio = { }, }; -static void __init omap3_beagle_init_early(void) -{ - omap2_init_common_infrastructure(); -} - static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, @@ -555,7 +550,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_beagle_init_early, + .init_early = omap3_init_early, .init_irq = omap3_init_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index aa6a9351ce4..2d24e287e8c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -45,7 +45,7 @@ #include <plat/common.h> #include <plat/mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -247,8 +247,7 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = omap3_evm_enable_dvi, .platform_disable = omap3_evm_disable_dvi, }; @@ -256,7 +255,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device omap3_evm_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index fed2f7dfdf8..f7811f4cfc3 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -335,7 +335,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = { static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 170e1ebd6e6..ddb7d6663c6 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -41,6 +41,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -107,39 +108,6 @@ static void __init omap3_stalker_display_init(void) return; } -static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1); - lcd_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0); - lcd_enabled = 0; -} - -static struct panel_generic_dpi_data lcd_panel = { - .name = "generic", - .platform_enable = omap3_stalker_enable_lcd, - .platform_disable = omap3_stalker_disable_lcd, -}; - -static struct omap_dss_device omap3_stalker_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, - .type = OMAP_DISPLAY_TYPE_DPI, -}; - static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -179,8 +147,7 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = omap3_stalker_enable_dvi, .platform_disable = omap3_stalker_disable_dvi, }; @@ -188,13 +155,12 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device omap3_stalker_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; static struct omap_dss_device *omap3_stalker_dss_devices[] = { - &omap3_stalker_lcd_device, &omap3_stalker_tv_device, &omap3_stalker_dvi_device, }; diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index c2d5348f542..a2d0d1971e2 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -104,15 +104,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct platform_device omap3_touchbook_lcd_device = { - .name = "omap3touchbook_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -165,14 +156,12 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = { static struct regulator_consumer_supply touchbook_vdac_supply[] = { { .supply = "vdac", - .dev = &omap3_touchbook_lcd_device.dev, }, }; static struct regulator_consumer_supply touchbook_vdvi_supply[] = { { .supply = "vdvi", - .dev = &omap3_touchbook_lcd_device.dev, }, }; @@ -316,10 +305,6 @@ static struct platform_device keys_gpio = { }, }; -static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { - { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -327,7 +312,6 @@ static struct omap_board_mux board_mux[] __initdata = { #endif static struct platform_device *omap3_touchbook_devices[] __initdata = { - &omap3_touchbook_lcd_device, &leds_gpio, &keys_gpio, }; @@ -364,8 +348,6 @@ early_param("tbr", early_touchbook_revision); static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = omap3_touchbook_config; - omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); pm_power_off = omap3_touchbook_poweroff; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 2141894eb9f..a8c2c4263e3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -40,7 +40,7 @@ #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include "hsmmc.h" #include "control.h" @@ -449,16 +449,16 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) } /* Using generic display panel */ -static struct panel_generic_dpi_data omap4_dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data omap4_dvi_panel = { .platform_enable = omap4_panda_enable_dvi, .platform_disable = omap4_panda_disable_dvi, + .i2c_bus_num = 3, }; struct omap_dss_device omap4_panda_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9f13dc22df7..4cf7aeabab8 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -46,6 +46,7 @@ #include <plat/common.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -182,16 +183,16 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = overo_panel_enable_dvi, .platform_disable = overo_panel_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device overo_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 5a886cd2c59..ba1aa07bdb2 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -900,7 +900,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = { }; static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { - .id = TPA6130A2, .power_gpio = 98, }; diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 74c8aadc0a1..4af7c4b2881 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -79,29 +79,6 @@ static struct cpuidle_params rx51_cpuidle_params[] = { {7505 + 15274, 484329, 1}, }; -static struct omap_lcd_config rx51_lcd_config = { - .ctrl_name = "internal", -}; - -static struct omap_fbmem_config rx51_fbmem0_config = { - .size = 752 * 1024, -}; - -static struct omap_fbmem_config rx51_fbmem1_config = { - .size = 752 * 1024, -}; - -static struct omap_fbmem_config rx51_fbmem2_config = { - .size = 752 * 1024, -}; - -static struct omap_board_config_kernel rx51_config[] = { - { OMAP_TAG_FBMEM, &rx51_fbmem0_config }, - { OMAP_TAG_FBMEM, &rx51_fbmem1_config }, - { OMAP_TAG_FBMEM, &rx51_fbmem2_config }, - { OMAP_TAG_LCD, &rx51_lcd_config }, -}; - extern void __init rx51_peripherals_init(void); #ifdef CONFIG_OMAP_MUX @@ -121,8 +98,6 @@ static void __init rx51_init(void) struct omap_sdrc_params *sdrc_params; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = rx51_config; - omap_board_config_size = ARRAY_SIZE(rx51_config); omap3_pm_init_cpuidle(rx51_cpuidle_params); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index e26c79cb6ce..e6ee8842285 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -37,7 +37,6 @@ static void __init ti8168_evm_init(void) static void __init ti8168_evm_map_io(void) { - omap2_set_globals_ti816x(); omapti816x_map_common_io(); } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index de61f15c48e..110e5b9db14 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -45,11 +45,11 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2420_SDRC_BASE, - .sms = OMAP2420_SMS_BASE, - .ctrl = OMAP242X_CTRL_BASE, - .prm = OMAP2420_PRM_BASE, - .cm = OMAP2420_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -59,7 +59,6 @@ void __init omap2_set_globals_242x(void) void __init omap242x_map_io(void) { - omap2_set_globals_242x(); omap242x_map_common_io(); } #endif @@ -69,11 +68,11 @@ void __init omap242x_map_io(void) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP243X_SDRC_BASE, - .sms = OMAP243X_SMS_BASE, - .ctrl = OMAP243X_CTRL_BASE, - .prm = OMAP2430_PRM_BASE, - .cm = OMAP2430_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -83,7 +82,6 @@ void __init omap2_set_globals_243x(void) void __init omap243x_map_io(void) { - omap2_set_globals_243x(); omap243x_map_common_io(); } #endif @@ -93,11 +91,11 @@ void __init omap243x_map_io(void) static struct omap_globals omap3_globals = { .class = OMAP343X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP343X_SDRC_BASE, - .sms = OMAP343X_SMS_BASE, - .ctrl = OMAP343X_CTRL_BASE, - .prm = OMAP3430_PRM_BASE, - .cm = OMAP3430_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_3xxx(void) @@ -107,7 +105,6 @@ void __init omap2_set_globals_3xxx(void) void __init omap3_map_io(void) { - omap2_set_globals_3xxx(); omap34xx_map_common_io(); } @@ -122,9 +119,9 @@ void __init omap3_map_io(void) static struct omap_globals ti816x_globals = { .class = OMAP343X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE), - .ctrl = TI816X_CTRL_BASE, - .prm = TI816X_PRCM_BASE, - .cm = TI816X_PRCM_BASE, + .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), }; void __init omap2_set_globals_ti816x(void) @@ -137,11 +134,11 @@ void __init omap2_set_globals_ti816x(void) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP443X_SCM_BASE, - .ctrl_pad = OMAP443X_CTRL_BASE, - .prm = OMAP4430_PRM_BASE, - .cm = OMAP4430_CM_BASE, - .cm2 = OMAP4430_CM2_BASE, + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), }; void __init omap2_set_globals_443x(void) @@ -153,7 +150,6 @@ void __init omap2_set_globals_443x(void) void __init omap4_map_io(void) { - omap2_set_globals_443x(); omap44xx_map_common_io(); } #endif diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index aab884fecc5..e34d27f8c49 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -149,17 +149,11 @@ static struct omap3_control_regs control_context; void __init omap2_set_globals_control(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->ctrl) { - omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K); - WARN_ON(!omap2_ctrl_base); - } + if (omap2_globals->ctrl) + omap2_ctrl_base = omap2_globals->ctrl; - /* Static mapping, never released */ - if (omap2_globals->ctrl_pad) { - omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K); - WARN_ON(!omap4_ctrl_pad_base); - } + if (omap2_globals->ctrl_pad) + omap4_ctrl_pad_base = omap2_globals->ctrl_pad; } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0f8e0eb1816..68ec03152d5 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -27,7 +27,6 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mcbsp.h> -#include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> @@ -316,6 +315,38 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ + defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) + +static struct omap_device_pm_latency omap_mcpdm_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static void omap_init_mcpdm(void) +{ + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup("mcpdm"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, + omap_mcpdm_latency, + ARRAY_SIZE(omap_mcpdm_latency), 0); + if (IS_ERR(od)) + printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n"); +} +#else +static inline void omap_init_mcpdm(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -660,6 +691,7 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_audio(); + omap_init_mcpdm(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 8ad0a2f0367..4036821a01f 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -27,6 +27,8 @@ #include <plat/omap_device.h> #include <plat/omap-pm.h> +#include "control.h" + static struct platform_device omap_display_device = { .name = "omapdss", .id = -1, @@ -53,7 +55,7 @@ static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = { { "dss_dispc", "omapdss_dispc", -1 }, { "dss_rfbi", "omapdss_rfbi", -1 }, { "dss_venc", "omapdss_venc", -1 }, - { "dss_dsi1", "omapdss_dsi1", -1 }, + { "dss_dsi1", "omapdss_dsi", 0 }, }; static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { @@ -61,11 +63,58 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_dispc", "omapdss_dispc", -1 }, { "dss_rfbi", "omapdss_rfbi", -1 }, { "dss_venc", "omapdss_venc", -1 }, - { "dss_dsi1", "omapdss_dsi1", -1 }, - { "dss_dsi2", "omapdss_dsi2", -1 }, + { "dss_dsi1", "omapdss_dsi", 0 }, + { "dss_dsi2", "omapdss_dsi", 1 }, { "dss_hdmi", "omapdss_hdmi", -1 }, }; +static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) +{ + u32 enable_mask, enable_shift; + u32 pipd_mask, pipd_shift; + u32 reg; + + if (dsi_id == 0) { + enable_mask = OMAP4_DSI1_LANEENABLE_MASK; + enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; + pipd_mask = OMAP4_DSI1_PIPD_MASK; + pipd_shift = OMAP4_DSI1_PIPD_SHIFT; + } else if (dsi_id == 1) { + enable_mask = OMAP4_DSI2_LANEENABLE_MASK; + enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; + pipd_mask = OMAP4_DSI2_PIPD_MASK; + pipd_shift = OMAP4_DSI2_PIPD_SHIFT; + } else { + return -ENODEV; + } + + reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + + reg &= ~enable_mask; + reg &= ~pipd_mask; + + reg |= (lanes << enable_shift) & enable_mask; + reg |= (lanes << pipd_shift) & pipd_mask; + + omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + + return 0; +} + +static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) +{ + if (cpu_is_omap44xx()) + return omap4_dsi_mux_pads(dsi_id, lane_mask); + + return 0; +} + +static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) +{ + if (cpu_is_omap44xx()) + omap4_dsi_mux_pads(dsi_id, 0); +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; @@ -88,6 +137,11 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } + if (board_data->dsi_enable_pads == NULL) + board_data->dsi_enable_pads = omap_dsi_enable_pads; + if (board_data->dsi_disable_pads == NULL) + board_data->dsi_disable_pads = omap_dsi_disable_pads; + pdata.board_data = board_data; pdata.board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f01273006e4..a5d8dce2a70 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -34,8 +34,8 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" -#include "io.h" +#include <plat/common.h> #include <plat/omap-pm.h> #include "voltage.h" #include "powerdomain.h" @@ -43,6 +43,7 @@ #include "clockdomain.h" #include <plat/omap_hwmod.h> #include <plat/multi.h> +#include <plat/common.h> /* * The machine specific code may provide the extra mapping besides the @@ -239,26 +240,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif -static void __init _omap2_map_common_io(void) -{ - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - omap2_check_revision(); - omap_sram_init(); - omap_init_consistent_dma_size(); -} - #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); - _omap2_map_common_io(); } #endif @@ -267,7 +253,6 @@ void __init omap243x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); - _omap2_map_common_io(); } #endif @@ -275,7 +260,6 @@ void __init omap243x_map_common_io(void) void __init omap34xx_map_common_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); - _omap2_map_common_io(); } #endif @@ -283,7 +267,6 @@ void __init omap34xx_map_common_io(void) void __init omapti816x_map_common_io(void) { iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc)); - _omap2_map_common_io(); } #endif @@ -291,7 +274,6 @@ void __init omapti816x_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); - _omap2_map_common_io(); } #endif @@ -337,33 +319,16 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) /* See irq.c, omap4-common.c and entry-macro.S */ void __iomem *omap_irq_base; -void __init omap2_init_common_infrastructure(void) +static void __init omap_common_init_early(void) { - u8 postsetup_state; + omap2_check_revision(); + omap_ioremap_init(); + omap_init_consistent_dma_size(); +} - if (cpu_is_omap242x()) { - omap2xxx_voltagedomains_init(); - omap242x_powerdomains_init(); - omap242x_clockdomains_init(); - omap2420_hwmod_init(); - } else if (cpu_is_omap243x()) { - omap2xxx_voltagedomains_init(); - omap243x_powerdomains_init(); - omap243x_clockdomains_init(); - omap2430_hwmod_init(); - } else if (cpu_is_omap34xx()) { - omap3xxx_voltagedomains_init(); - omap3xxx_powerdomains_init(); - omap3xxx_clockdomains_init(); - omap3xxx_hwmod_init(); - } else if (cpu_is_omap44xx()) { - omap44xx_voltagedomains_init(); - omap44xx_powerdomains_init(); - omap44xx_clockdomains_init(); - omap44xx_hwmod_init(); - } else { - pr_err("Could not init hwmod data - unknown SoC\n"); - } +static void __init omap_hwmod_init_postsetup(void) +{ + u8 postsetup_state; /* Set the default postsetup state for all hwmods */ #ifdef CONFIG_PM_RUNTIME @@ -392,67 +357,101 @@ void __init omap2_init_common_infrastructure(void) &postsetup_state); omap_pm_if_early_init(); - - if (cpu_is_omap2420()) - omap2420_clk_init(); - else if (cpu_is_omap2430()) - omap2430_clk_init(); - else if (cpu_is_omap34xx()) - omap3xxx_clk_init(); - else if (cpu_is_omap44xx()) - omap4xxx_clk_init(); - else - pr_err("Could not init clock framework - unknown SoC\n"); } void __init omap2420_init_early(void) { - omap2_init_common_infrastructure(); + omap2_set_globals_242x(); + omap_common_init_early(); + omap2xxx_voltagedomains_init(); + omap242x_powerdomains_init(); + omap242x_clockdomains_init(); + omap2420_hwmod_init(); + omap_hwmod_init_postsetup(); + omap2420_clk_init(); } void __init omap2430_init_early(void) { - omap2_init_common_infrastructure(); + omap2_set_globals_243x(); + omap_common_init_early(); + omap2xxx_voltagedomains_init(); + omap243x_powerdomains_init(); + omap243x_clockdomains_init(); + omap2430_hwmod_init(); + omap_hwmod_init_postsetup(); + omap2430_clk_init(); +} + +/* + * Currently only board-omap3beagle.c should call this because of the + * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. + */ +void __init omap3_init_early(void) +{ + omap2_set_globals_3xxx(); + omap_common_init_early(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + omap3xxx_clockdomains_init(); + omap3xxx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap3xxx_clk_init(); } void __init omap3430_init_early(void) { - omap2_init_common_infrastructure(); + omap3_init_early(); } void __init omap35xx_init_early(void) { - omap2_init_common_infrastructure(); + omap3_init_early(); } void __init omap3630_init_early(void) { - omap2_init_common_infrastructure(); + omap3_init_early(); } void __init am35xx_init_early(void) { - omap2_init_common_infrastructure(); + omap3_init_early(); } void __init ti816x_init_early(void) { - omap2_init_common_infrastructure(); + omap2_set_globals_ti816x(); + omap_common_init_early(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + omap3xxx_clockdomains_init(); + omap3xxx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap3xxx_clk_init(); } void __init omap4430_init_early(void) { - omap2_init_common_infrastructure(); + omap2_set_globals_443x(); + omap_common_init_early(); + omap44xx_voltagedomains_init(); + omap44xx_powerdomains_init(); + omap44xx_clockdomains_init(); + omap44xx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap4xxx_clk_init(); } void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { + omap_sram_init(); + if (cpu_is_omap24xx() || omap3_has_sdrc()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); } - } /* diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h index fd230c6cded..e69de29bb2d 100644 --- a/arch/arm/mach-omap2/io.h +++ b/arch/arm/mach-omap2/io.h @@ -1,7 +0,0 @@ - -#ifndef __MACH_OMAP2_IO_H__ -#define __MACH_OMAP2_IO_H__ - -extern int __init omap_sram_init(void); - -#endif /* __MACH_OMAP2_IO_H__ */ diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index f286012783c..eefc37912ef 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -66,7 +66,7 @@ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) -static void __iommu_set_twl(struct iommu *obj, bool on) +static void __iommu_set_twl(struct omap_iommu *obj, bool on) { u32 l = iommu_read_reg(obj, MMU_CNTL); @@ -85,7 +85,7 @@ static void __iommu_set_twl(struct iommu *obj, bool on) } -static int omap2_iommu_enable(struct iommu *obj) +static int omap2_iommu_enable(struct omap_iommu *obj) { u32 l, pa; unsigned long timeout; @@ -127,7 +127,7 @@ static int omap2_iommu_enable(struct iommu *obj) return 0; } -static void omap2_iommu_disable(struct iommu *obj) +static void omap2_iommu_disable(struct omap_iommu *obj) { u32 l = iommu_read_reg(obj, MMU_CNTL); @@ -138,12 +138,12 @@ static void omap2_iommu_disable(struct iommu *obj) dev_dbg(obj->dev, "%s is shutting down\n", obj->name); } -static void omap2_iommu_set_twl(struct iommu *obj, bool on) +static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on) { __iommu_set_twl(obj, false); } -static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) +static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra) { u32 stat, da; u32 errs = 0; @@ -173,13 +173,13 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) return errs; } -static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) +static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr) { cr->cam = iommu_read_reg(obj, MMU_READ_CAM); cr->ram = iommu_read_reg(obj, MMU_READ_RAM); } -static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr) +static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr) { iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); iommu_write_reg(obj, cr->ram, MMU_RAM); @@ -193,7 +193,8 @@ static u32 omap2_cr_to_virt(struct cr_regs *cr) return cr->cam & mask; } -static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) +static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj, + struct iotlb_entry *e) { struct cr_regs *cr; @@ -230,7 +231,8 @@ static u32 omap2_get_pte_attr(struct iotlb_entry *e) return attr; } -static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) +static ssize_t +omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf) { char *p = buf; @@ -254,7 +256,8 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) goto out; \ } while (0) -static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len) +static ssize_t +omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len) { char *p = buf; @@ -280,7 +283,7 @@ out: return p - buf; } -static void omap2_iommu_save_ctx(struct iommu *obj) +static void omap2_iommu_save_ctx(struct omap_iommu *obj) { int i; u32 *p = obj->ctx; @@ -293,7 +296,7 @@ static void omap2_iommu_save_ctx(struct iommu *obj) BUG_ON(p[0] != IOMMU_ARCH_VERSION); } -static void omap2_iommu_restore_ctx(struct iommu *obj) +static void omap2_iommu_restore_ctx(struct omap_iommu *obj) { int i; u32 *p = obj->ctx; @@ -343,13 +346,13 @@ static const struct iommu_functions omap2_iommu_ops = { static int __init omap2_iommu_init(void) { - return install_iommu_arch(&omap2_iommu_ops); + return omap_install_iommu_arch(&omap2_iommu_ops); } module_init(omap2_iommu_init); static void __exit omap2_iommu_exit(void) { - uninstall_iommu_arch(&omap2_iommu_ops); + omap_uninstall_iommu_arch(&omap2_iommu_ops); } module_exit(omap2_iommu_exit); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 889464dc7b2..4412ddb7b3f 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -102,8 +102,11 @@ void __init smp_init_cpus(void) { unsigned int i, ncores; - /* Never released */ - scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256); + /* + * Currently we can't call ioremap here because + * SoC detection won't work until after init_early. + */ + scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); BUG_ON(!scu_base); ncores = scu_get_core_count(scu_base); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 393afac9caf..7695e5d4331 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5370,7 +5370,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_mcbsp4_hwmod, /* mcpdm class */ -/* &omap44xx_mcpdm_hwmod, */ + &omap44xx_mcpdm_hwmod, /* mcspi class */ &omap44xx_mcspi1_hwmod, diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 2e40a5cf016..8db5f035eb0 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -151,17 +151,10 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->prm) { - prm_base = ioremap(omap2_globals->prm, SZ_8K); - WARN_ON(!prm_base); - } - if (omap2_globals->cm) { - cm_base = ioremap(omap2_globals->cm, SZ_8K); - WARN_ON(!cm_base); - } - if (omap2_globals->cm2) { - cm2_base = ioremap(omap2_globals->cm2, SZ_8K); - WARN_ON(!cm2_base); - } + if (omap2_globals->prm) + prm_base = omap2_globals->prm; + if (omap2_globals->cm) + cm_base = omap2_globals->cm; + if (omap2_globals->cm2) + cm2_base = omap2_globals->cm2; } diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index da6f3a63b5d..8f278287477 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -117,15 +117,10 @@ int omap2_sdrc_get_params(unsigned long r, void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->sdrc) { - omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K); - WARN_ON(!omap2_sdrc_base); - } - if (omap2_globals->sms) { - omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K); - WARN_ON(!omap2_sms_base); - } + if (omap2_globals->sdrc) + omap2_sdrc_base = omap2_globals->sdrc; + if (omap2_globals->sms) + omap2_sms_base = omap2_globals->sms; } /** diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index bb606c9709b..0347b93211e 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -248,7 +248,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currently this function registers interrrupt handler for a particular SR + * Currently this function registers interrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index daa056ed873..52243577216 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -99,7 +99,7 @@ static struct regulator_init_data omap3_vdac_idata = { static struct regulator_consumer_supply omap3_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data omap3_vpll2_idata = { @@ -235,6 +235,12 @@ static struct regulator_init_data omap4_vana_idata = { }, }; +static struct regulator_consumer_supply omap4_vcxio_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"), +}; + static struct regulator_init_data omap4_vcxio_idata = { .constraints = { .min_uV = 1800000, @@ -243,7 +249,10 @@ static struct regulator_init_data omap4_vcxio_idata = { | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .always_on = true, }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), + .consumer_supplies = omap4_vcxio_supply, }; static struct regulator_init_data omap4_vusb_idata = { diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-orion5x/Makefile.boot +++ b/arch/arm/mach-orion5x/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0ab531d047f..22ace0bf2f9 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -308,8 +308,8 @@ void __init orion5x_init(void) * Many orion-based systems have buggy bootloader implementations. * This is a common fixup for bogus memory tags. */ -void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, - char **from, struct meminfo *meminfo) +void __init tag_fixup_mem32(struct tag *t, char **from, + struct meminfo *meminfo) { for (; t->hdr.size; t = tag_next(t)) if (t->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 3e5499dda49..909489f4d23 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -53,11 +53,9 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -struct machine_desc; struct meminfo; struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); +extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); #endif diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 88432aba972..4b79a80d5e1 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/mv643xx_eth.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 9e5c1663fc4..343f60e9639 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -13,7 +13,7 @@ * License, or (at your option) any later version. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> @@ -30,7 +30,6 @@ #include <linux/phy.h> #include <linux/marvell_phy.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 43cf8bc9767..b1b45fff776 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -9,12 +9,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/bridge-regs.h> #include <plat/irq.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 9115511dc03..d3cd3f63258 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index b3356ada64b..201ae367628 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> #include "common.h" diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 8c876664f49..ebd6767d8e8 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 994644f59d8..05db2d336b0 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -19,7 +19,6 @@ #include <linux/i2c.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 1903d25ecae..e47fa0578ae 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -9,7 +9,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/ata_platform.h> #include <linux/i2c.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index e06fdae77f0..64317251ec0 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -21,7 +21,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 306183273eb..29f1526f7b7 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 3dbcd5ed77e..31e51f9b4b6 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -23,7 +23,6 @@ #include <linux/serial_reg.h> #include <linux/ata_platform.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 23c9e2e5e55..0fbcc14e09d 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -11,7 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -25,7 +25,6 @@ #include <linux/i2c.h> #include <linux/serial_reg.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 1c63a76f3ca..b8be7d8d0cf 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -17,7 +17,6 @@ #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 4fd9f18c9d5..faf81a03936 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -5,7 +5,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -20,7 +20,6 @@ #include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> -#include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot index 44c7117e20d..9fa19baa7f2 100644 --- a/arch/arm/mach-pnx4008/Makefile.boot +++ b/arch/arm/mach-pnx4008/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x80008000 + zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c index f219914f5b2..d3e71d3847b 100644 --- a/arch/arm/mach-pnx4008/gpio.c +++ b/arch/arm/mach-pnx4008/gpio.c @@ -13,14 +13,13 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ - #include <linux/types.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/io.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> /* register definitions */ #define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h index 9591467eb9e..41027dd7cf7 100644 --- a/arch/arm/mach-pnx4008/include/mach/gpio.h +++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h @@ -1,5 +1,5 @@ /* - * arch/arm/mach-pnx4008/include/mach/gpio.h + * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h * * PNX4008 GPIO driver - header file * diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c index f40961e5191..374c138ac1a 100644 --- a/arch/arm/mach-pnx4008/serial.c +++ b/arch/arm/mach-pnx4008/serial.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/io.h> @@ -19,8 +18,8 @@ #include <linux/serial_core.h> #include <linux/serial_reg.h> -#include <mach/gpio.h> +#include <mach/gpio-pnx4008.h> #include <mach/clock.h> #define UART_3 0 diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 7af7fc05d56..13dd1604d95 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -3,5 +3,7 @@ obj-y += irq.o obj-y += clock.o obj-y += rstc.o obj-y += prima2.o +obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o +obj-$(CONFIG_SUSPEND) += pm.o sleep.o diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot index d023db3ae4f..c77a4883a4e 100644 --- a/arch/arm/mach-prima2/Makefile.boot +++ b/arch/arm/mach-prima2/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index 615a4e75cea..aebad7e565c 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -350,10 +350,10 @@ static struct clk_lookup onchip_clks[] = { .clk = &clk_mem, }, { .dev_id = "sys", - .clk = &clk_sys, + .clk = &clk_sys, }, { .dev_id = "io", - .clk = &clk_io, + .clk = &clk_io, }, }; diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index 7af254d046b..d93ceef4a50 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -13,6 +13,8 @@ #include <asm/mach/irq.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/irqdomain.h> +#include <linux/syscore_ops.h> #define SIRFSOC_INT_RISC_MASK0 0x0018 #define SIRFSOC_INT_RISC_MASK1 0x001C @@ -66,7 +68,48 @@ void __init sirfsoc_of_irq_init(void) if (!sirfsoc_intc_base) panic("unable to map intc cpu registers\n"); + irq_domain_add_simple(np, 0); + of_node_put(np); sirfsoc_irq_init(); } + +struct sirfsoc_irq_status { + u32 mask0; + u32 mask1; + u32 level0; + u32 level1; +}; + +static struct sirfsoc_irq_status sirfsoc_irq_st; + +static int sirfsoc_irq_suspend(void) +{ + sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); + sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); + + return 0; +} + +static void sirfsoc_irq_resume(void) +{ + writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); + writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); +} + +static struct syscore_ops sirfsoc_irq_syscore_ops = { + .suspend = sirfsoc_irq_suspend, + .resume = sirfsoc_irq_resume, +}; + +static int __init sirfsoc_irq_pm_init(void) +{ + register_syscore_ops(&sirfsoc_irq_syscore_ops); + return 0; +} +device_initcall(sirfsoc_irq_pm_init); diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index 66c6387e5a0..c99837797d7 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -8,51 +8,24 @@ #include <linux/init.h> #include <linux/kernel.h> -#include <linux/io.h> -#include <linux/errno.h> #include <linux/of.h> -#include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> -#define L2X0_ADDR_FILTERING_START 0xC00 -#define L2X0_ADDR_FILTERING_END 0xC04 - -static struct of_device_id l2x_ids[] = { - { .compatible = "arm,pl310-cache" }, +static struct of_device_id prima2_l2x0_ids[] = { + { .compatible = "sirf,prima2-pl310-cache" }, + {}, }; -static int __init sirfsoc_of_l2x_init(void) +static int __init sirfsoc_l2x0_init(void) { struct device_node *np; - void __iomem *sirfsoc_l2x_base; - - np = of_find_matching_node(NULL, l2x_ids); - if (!np) - panic("unable to find compatible l2x node in dtb\n"); - - sirfsoc_l2x_base = of_iomap(np, 0); - if (!sirfsoc_l2x_base) - panic("unable to map l2x cpu registers\n"); - - of_node_put(np); - - if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) { - /* - * set the physical memory windows L2 cache will cover - */ - writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024, - sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); - writel_relaxed(PHYS_OFFSET | 0x1, - sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); - writel_relaxed(0, - sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0, - sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL); + np = of_find_matching_node(NULL, prima2_l2x0_ids); + if (np) { + pr_info("Initializing prima2 L2 cache\n"); + return l2x0_of_init(0x40000, 0); } - l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000, - 0x00000000); return 0; } -early_initcall(sirfsoc_of_l2x_init); +early_initcall(sirfsoc_l2x0_init); diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c new file mode 100644 index 00000000000..cb53160f6c5 --- /dev/null +++ b/arch/arm/mach-prima2/pm.c @@ -0,0 +1,150 @@ +/* + * power management entry for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/rtc/sirfsoc_rtciobrg.h> +#include <asm/suspend.h> +#include <asm/hardware/cache-l2x0.h> + +#include "pm.h" + +/* + * suspend asm codes will access these to make DRAM become self-refresh and + * system sleep + */ +u32 sirfsoc_pwrc_base; +void __iomem *sirfsoc_memc_base; + +static void sirfsoc_set_wakeup_source(void) +{ + u32 pwr_trigger_en_reg; + pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + + SIRFSOC_PWRC_TRIGGER_EN); +#define X_ON_KEY_B (1 << 0) + sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B, + sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN); +} + +static void sirfsoc_set_sleep_mode(u32 mode) +{ + u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + + SIRFSOC_PWRC_PDN_CTRL); + sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1); + sleep_mode |= mode << 1; + sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base + + SIRFSOC_PWRC_PDN_CTRL); +} + +static int sirfsoc_pre_suspend_power_off(void) +{ + u32 wakeup_entry = virt_to_phys(cpu_resume); + + sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base + + SIRFSOC_PWRC_SCRATCH_PAD1); + + sirfsoc_set_wakeup_source(); + + sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE); + + return 0; +} + +static int sirfsoc_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + sirfsoc_pre_suspend_power_off(); + + outer_flush_all(); + outer_disable(); + /* go zzz */ + cpu_suspend(0, sirfsoc_finish_suspend); + outer_resume(); + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct platform_suspend_ops sirfsoc_pm_ops = { + .enter = sirfsoc_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init sirfsoc_pm_init(void) +{ + suspend_set_ops(&sirfsoc_pm_ops); + return 0; +} +late_initcall(sirfsoc_pm_init); + +static const struct of_device_id pwrc_ids[] = { + { .compatible = "sirf,prima2-pwrc" }, + {} +}; + +static int __init sirfsoc_of_pwrc_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, pwrc_ids); + if (!np) + panic("unable to find compatible pwrc node in dtb\n"); + + /* + * pwrc behind rtciobrg is not located in memory space + * though the property is named reg. reg only means base + * offset for pwrc. then of_iomap is not suitable here. + */ + if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base)) + panic("unable to find base address of pwrc node in dtb\n"); + + of_node_put(np); + + return 0; +} +postcore_initcall(sirfsoc_of_pwrc_init); + +static const struct of_device_id memc_ids[] = { + { .compatible = "sirf,prima2-memc" }, + {} +}; + +static int __devinit sirfsoc_memc_probe(struct platform_device *op) +{ + struct device_node *np = op->dev.of_node; + + sirfsoc_memc_base = of_iomap(np, 0); + if (!sirfsoc_memc_base) + panic("unable to map memc registers\n"); + + return 0; +} + +static struct platform_driver sirfsoc_memc_driver = { + .probe = sirfsoc_memc_probe, + .driver = { + .name = "sirfsoc-memc", + .owner = THIS_MODULE, + .of_match_table = memc_ids, + }, +}; + +static int __init sirfsoc_memc_init(void) +{ + return platform_driver_register(&sirfsoc_memc_driver); +} +postcore_initcall(sirfsoc_memc_init); diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h new file mode 100644 index 00000000000..bae6d77e01a --- /dev/null +++ b/arch/arm/mach-prima2/pm.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/pm.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _MACH_PRIMA2_PM_H_ +#define _MACH_PRIMA2_PM_H_ + +#define SIRFSOC_PWR_SLEEPFORCE 0x01 + +#define SIRFSOC_SLEEP_MODE_MASK 0x3 +#define SIRFSOC_DEEP_SLEEP_MODE 0x1 + +#define SIRFSOC_PWRC_PDN_CTRL 0x0 +#define SIRFSOC_PWRC_PON_OFF 0x4 +#define SIRFSOC_PWRC_TRIGGER_EN 0x8 +#define SIRFSOC_PWRC_PIN_STATUS 0x14 +#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18 +#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C + +#ifndef __ASSEMBLY__ +extern int sirfsoc_finish_suspend(unsigned long); +#endif + +#endif + diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ee33c3d458f..ef555c04196 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -1,5 +1,5 @@ /* - * Defines machines for CSR SiRFprimaII + * Defines machines for CSR SiRFprimaII * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. * diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c new file mode 100644 index 00000000000..9d80f1e20a9 --- /dev/null +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -0,0 +1,139 @@ +/* + * RTC I/O Bridge interfaces for CSR SiRFprimaII + * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> + +#define SIRFSOC_CPUIOBRG_CTRL 0x00 +#define SIRFSOC_CPUIOBRG_WRBE 0x04 +#define SIRFSOC_CPUIOBRG_ADDR 0x08 +#define SIRFSOC_CPUIOBRG_DATA 0x0c + +/* + * suspend asm codes will access this address to make system deepsleep + * after DRAM becomes self-refresh + */ +void __iomem *sirfsoc_rtciobrg_base; +static DEFINE_SPINLOCK(rtciobrg_lock); + +/* + * symbols without lock are only used by suspend asm codes + * and these symbols are not exported too + */ +void sirfsoc_rtc_iobrg_wait_sync(void) +{ + while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL)) + cpu_relax(); +} + +void sirfsoc_rtc_iobrg_besyncing(void) +{ + unsigned long flags; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + sirfsoc_rtc_iobrg_wait_sync(); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing); + +u32 __sirfsoc_rtc_iobrg_readl(u32 addr) +{ + sirfsoc_rtc_iobrg_wait_sync(); + + writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); + writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); + writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); + + sirfsoc_rtc_iobrg_wait_sync(); + + return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); +} + +u32 sirfsoc_rtc_iobrg_readl(u32 addr) +{ + unsigned long flags, val; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + val = __sirfsoc_rtc_iobrg_readl(addr); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); + + return val; +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl); + +void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr) +{ + sirfsoc_rtc_iobrg_wait_sync(); + + writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); + writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); + + writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); +} + +void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr) +{ + unsigned long flags; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + sirfsoc_rtc_iobrg_pre_writel(val, addr); + + writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); + + sirfsoc_rtc_iobrg_wait_sync(); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); + +static const struct of_device_id rtciobrg_ids[] = { + { .compatible = "sirf,prima2-rtciobg" }, + {} +}; + +static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op) +{ + struct device_node *np = op->dev.of_node; + + sirfsoc_rtciobrg_base = of_iomap(np, 0); + if (!sirfsoc_rtciobrg_base) + panic("unable to map rtc iobrg registers\n"); + + return 0; +} + +static struct platform_driver sirfsoc_rtciobrg_driver = { + .probe = sirfsoc_rtciobrg_probe, + .driver = { + .name = "sirfsoc-rtciobrg", + .owner = THIS_MODULE, + .of_match_table = rtciobrg_ids, + }, +}; + +static int __init sirfsoc_rtciobrg_init(void) +{ + return platform_driver_register(&sirfsoc_rtciobrg_driver); +} +postcore_initcall(sirfsoc_rtciobrg_init); + +MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, " + "Barry Song <baohua.song@csr.com>"); +MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S new file mode 100644 index 00000000000..0745abc365f --- /dev/null +++ b/arch/arm/mach-prima2/sleep.S @@ -0,0 +1,64 @@ +/* + * sleep mode for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm/assembler.h> + +#include "pm.h" + +#define DENALI_CTL_22_OFF 0x58 +#define DENALI_CTL_112_OFF 0x1c0 + + .text + +ENTRY(sirfsoc_finish_suspend) + @ r5: mem controller + ldr r0, =sirfsoc_memc_base + ldr r5, [r0] + @ r6: pwrc base offset + ldr r0, =sirfsoc_pwrc_base + ldr r6, [r0] + @ r7: rtc iobrg controller + ldr r0, =sirfsoc_rtciobrg_base + ldr r7, [r0] + + @ Read the power control register and set the + @ sleep force bit. + add r0, r6, #SIRFSOC_PWRC_PDN_CTRL + bl __sirfsoc_rtc_iobrg_readl + orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE + add r1, r6, #SIRFSOC_PWRC_PDN_CTRL + bl sirfsoc_rtc_iobrg_pre_writel + mov r1, #0x1 + + @ read the MEM ctl register and set the self + @ refresh bit + + ldr r2, [r5, #DENALI_CTL_22_OFF] + orr r2, r2, #0x1 + + @ Following code has to run from cache since + @ the RAM is going to self refresh mode + .align 5 + str r2, [r5, #DENALI_CTL_22_OFF] + +1: + ldr r4, [r5, #DENALI_CTL_112_OFF] + tst r4, #0x1 + bne 1b + + @ write SLEEPFORCE through rtc iobridge + + str r1, [r7] + @ wait rtc io bridge sync +1: + ldr r3, [r7] + tst r3, #0x01 + bne 1b + b . diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index ed7ec48d11d..b7a6091ce79 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -40,6 +40,17 @@ #define SIRFSOC_TIMER_LATCH_BIT BIT(0) +#define SIRFSOC_TIMER_REG_CNT 11 + +static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { + SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2, + SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5, + SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV, + SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI, +}; + +static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; + static void __iomem *sirfsoc_timer_base; static void __init sirfsoc_of_timer_map(void); @@ -106,6 +117,27 @@ static void sirfsoc_timer_set_mode(enum clock_event_mode mode, } } +static void sirfsoc_clocksource_suspend(struct clocksource *cs) +{ + int i; + + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); +} + +static void sirfsoc_clocksource_resume(struct clocksource *cs) +{ + int i; + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); + + writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); +} + static struct clock_event_device sirfsoc_clockevent = { .name = "sirfsoc_clockevent", .rating = 200, @@ -120,6 +152,8 @@ static struct clocksource sirfsoc_clocksource = { .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, .read = sirfsoc_timer_read, + .suspend = sirfsoc_clocksource_suspend, + .resume = sirfsoc_clocksource_resume, }; static struct irqaction sirfsoc_timer_irq = { @@ -133,14 +167,14 @@ static struct irqaction sirfsoc_timer_irq = { /* Overwrite weak default sched_clock with more precise one */ unsigned long long notrace sched_clock(void) { - static int is_mapped = 0; + static int is_mapped; /* * sched_clock is called earlier than .init of sys_timer * if we map timer memory in .init of sys_timer, system * will panic due to illegal memory access */ - if(!is_mapped) { + if (!is_mapped) { sirfsoc_of_timer_map(); is_mapped = 1; } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd19309fd3b..61d3c72ded8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,6 +2,27 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" +config ARCH_PXA_V7 + bool "ARMv7 (PXA95x) based systems" + +if ARCH_PXA_V7 +comment "Marvell Dev Platforms (sorted by hardware release time)" +config MACH_TAVOREVB3 + bool "PXA95x Development Platform (aka TavorEVB III)" + select CPU_PXA955 + +config MACH_SAARB + bool "PXA955 Handheld Platform (aka SAARB)" + select CPU_PXA955 +endif + +config PXA_V7_MACH_AUTO + def_bool y + depends on ARCH_PXA_V7 + depends on !MACH_SAARB + select MACH_TAVOREVB3 + +if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config ARCH_LUBBOCK @@ -41,19 +62,11 @@ config MACH_TAVOREVB select PXA3xx select CPU_PXA930 -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA950 - config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select CPU_PXA930 -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 - comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP @@ -414,6 +427,7 @@ config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -425,6 +439,7 @@ config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM + select MACH_PALM27X select PXA27x select IWMMXT select PALM_TREO @@ -436,15 +451,18 @@ config MACH_RAUMFELD_RC bool "Raumfeld Controller" select PXA3xx select CPU_PXA300 + select POWER_SUPPLY select HAVE_PWM config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" + select POWER_SUPPLY select PXA3xx select CPU_PXA300 @@ -598,7 +616,7 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - +endif endmenu config PXA25x @@ -688,6 +706,8 @@ config SHARPSL_PM config SHARPSL_PM_MAX1111 bool select HWMON + select SPI + select SPI_MASTER select SENSORS_MAX1111 config PXA_HAVE_ISA_IRQS diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index cc39d17b2e0..be0f7df8685 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,7 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o +obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot index 1ead67178ec..2c1ae92f210 100644 --- a/arch/arm/mach-pxa/Makefile.boot +++ b/arch/arm/mach-pxa/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0xa0008000 + zreladdr-y += 0xa0008000 diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 7765d677adb..fc0b8544e17 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -591,7 +591,7 @@ static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ct BALLOON3_NAND_CONTROL_REG); if (balloon3_ctl_set) __raw_writel(balloon3_ctl_set, - BALLOON3_NAND_CONTROL_REG | + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); } @@ -608,7 +608,7 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) __raw_writew( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); /* Deassert correct nCE line */ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip, @@ -626,7 +626,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) int ret; __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, - BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR); ver = __raw_readw(BALLOON3_FPGA_VER); if (ver < 0x4f08) @@ -649,7 +649,7 @@ static int balloon3_nand_probe(struct platform_device *pdev) BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | BALLOON3_NAND_CONTROL_FLWP, - BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); + BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR); return 0; err2: @@ -807,7 +807,7 @@ static void __init balloon3_init(void) static struct map_desc balloon3_io_desc[] __initdata = { { /* CPLD/FPGA */ - .virtual = BALLOON3_FPGA_VIRT, + .virtual = (unsigned long)BALLOON3_FPGA_VIRT, .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), .length = BALLOON3_FPGA_LENGTH, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 93f59f877fc..be751470d37 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -11,7 +11,6 @@ #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand-gpio.h> diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 6bf479d9b5a..ebd9259f5ac 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -26,7 +26,7 @@ #include <asm/hardware/it8152.h> -unsigned long it8152_base_address; +void __iomem *it8152_base_address; static int cmx2xx_it8152_irq_gpio; static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 349896c53ab..f2e4190080c 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -39,7 +39,7 @@ extern void cmx270_init(void); #define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) /* virtual addresses for statically mapped regions */ -#define CMX2XX_VIRT_BASE (0xe8000000) +#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) /* physical address if local-bus attached devices */ @@ -482,7 +482,7 @@ static void __init cmx2xx_init_irq(void) /* Map PCI companion statically */ static struct map_desc cmx2xx_io_desc[] __initdata = { [0] = { /* PCI bridge */ - .virtual = CMX2XX_IT8152_VIRT, + .virtual = (unsigned long)CMX2XX_IT8152_VIRT, .pfn = __phys_to_pfn(PXA_CS4_PHYS), .length = SZ_64M, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 9ac0225cd51..3a7387f93c3 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -775,7 +775,6 @@ static struct gpio cm_x300_wi2wi_gpios[] __initdata = { static void __init cm_x300_init_wi2wi(void) { - int bt_reset, wlan_en; int err; if (system_rev < 130) { @@ -791,12 +790,11 @@ static void __init cm_x300_init_wi2wi(void) } udelay(10); - gpio_set_value(bt_reset, 0); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0); udelay(10); - gpio_set_value(bt_reset, 1); + gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1); - gpio_free(wlan_en); - gpio_free(bt_reset); + gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios)); } /* MFP */ @@ -839,8 +837,8 @@ static void __init cm_x300_init(void) cm_x300_init_bl(); } -static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, - char **cmdline, struct meminfo *mi) +static void __init cm_x300_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { /* Make sure that mi->bank[0].start = PHYS_ADDR */ for (; tags->hdr.size; tags = tag_next(tags)) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 185a37cad25..3e9483b0605 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -705,8 +705,8 @@ static void __init corgi_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_corgi(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_corgi(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index e823c54057f..8e697dd8acc 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -41,8 +41,7 @@ #include "clock.h" /* Only e800 has 128MB RAM */ -void __init eseries_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { mi->nr_banks=1; mi->bank[0].start = 0xa0000000; diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h index 5930f5e2a12..be921965e91 100644 --- a/arch/arm/mach-pxa/eseries.h +++ b/arch/arm/mach-pxa/eseries.h @@ -1,5 +1,4 @@ -void __init eseries_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi); +void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi); extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info; extern struct pxaficp_platform_data e7xx_ficp_platform_data; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index f5d91efc296..5432ecb15de 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +27,6 @@ #include <asm/mach-types.h> #include <mach/reset.h> -#include <mach/gpio.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h index f4c03659168..bbf9df37ad4 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/include/mach/addr-map.h @@ -20,7 +20,7 @@ * Peripheral Bus */ #define PERIPH_PHYS 0x40000000 -#define PERIPH_VIRT 0xf2000000 +#define PERIPH_VIRT IOMEM(0xf2000000) #define PERIPH_SIZE 0x02000000 /* @@ -28,21 +28,21 @@ */ #define PXA2XX_SMEMC_PHYS 0x48000000 #define PXA3XX_SMEMC_PHYS 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define SMEMC_SIZE 0x00100000 /* * Dynamic Memory Controller (only on PXA3xx) */ #define DMEMC_PHYS 0x48100000 -#define DMEMC_VIRT 0xf6100000 +#define DMEMC_VIRT IOMEM(0xf6100000) #define DMEMC_SIZE 0x00100000 /* * Internal Memory Controller (PXA27x and later) */ #define IMEMC_PHYS 0x58000000 -#define IMEMC_VIRT 0xfe000000 +#define IMEMC_VIRT IOMEM(0xfe000000) #define IMEMC_SIZE 0x00100000 #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 7074e76146c..6d7eab3d086 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -23,7 +23,7 @@ enum balloon3_features { }; #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS -#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ +#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 #define BALLOON3_FPGA_SETnCLR (0x1000) diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h new file mode 100644 index 00000000000..576868f8b8c --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h @@ -0,0 +1,133 @@ +/* + * Written by Philipp Zabel <philipp.zabel@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __MACH_PXA_GPIO_PXA_H +#define __MACH_PXA_GPIO_PXA_H + +#include <mach/irqs.h> +#include <mach/hardware.h> + +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + + +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) +{ + return cpu_is_pxa25x() && gpio > 85; +} +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; + else + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); +} + +#include <plat/gpio-pxa.h> +#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index c4639502efc..004cade7bb1 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,84 +24,10 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/irqs.h> -#include <mach/hardware.h> #include <asm-generic/gpio.h> +/* The defines for the driver are needed for the accelerated accessors */ +#include "gpio-pxa.h" -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) static inline int irq_to_gpio(unsigned int irq) @@ -118,37 +44,5 @@ static inline int irq_to_gpio(unsigned int irq) return -1; } -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - #include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index de63ca3016b..8184669dde2 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -36,22 +36,23 @@ * Note that not all PXA2xx chips implement all those addresses, and the * kernel only maps the minimum needed range of this mapping. */ -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #ifndef __ASSEMBLY__ - -# define __REG(x) (*((volatile u32 *)io_p2v(x))) +# define IOMEM(x) ((void __iomem *)(x)) +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile u32 *)((u32)&__REG(x) + (y))) + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) #else +# define IOMEM(x) x # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 2a5726c15e0..b6238cbd8ae 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #define LITTLETON_ETH_PHYS 0x30000000 diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index cd070092b6e..4edc712a2de 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -13,13 +13,13 @@ #define __ASM_ARCH_LPD270_H #define LPD270_CPLD_PHYS PXA_CS2_PHYS -#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_VIRT IOMEM(0xf0000000) #define LPD270_CPLD_SIZE 0x00100000 #define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) /* CPLD registers */ -#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x)) #define LPD270_CONTROL LPD270_CPLD_REG(0x00) #define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) #define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 297387ec361..990d2bf2fb4 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -16,7 +16,6 @@ #define __ARCH_PXA_MTD_XIP_H__ #include <mach/regs-ost.h> -#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index 0a5e5eadebf..f80bbe246af 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -34,7 +34,7 @@ extern struct pxafb_mode_info palm_320x320_new_lcd_mode; extern void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode); #else -static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#define palm27x_lcd_init(power, mode) do {} while (0) #endif #if defined(CONFIG_USB_GADGET_PXA27X) || \ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 10abc4f2e8e..7074a6ed46c 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -71,7 +71,7 @@ /* Various addresses */ #define PALMTX_PCMCIA_PHYS 0x28000000 -#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000) #define PALMTX_PCMCIA_SIZE 0x100000 #define PALMTX_PHYS_RAM_START 0xa0000000 @@ -84,8 +84,8 @@ #define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24)) #define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25)) -#define PALMTX_NAND_ALE_VIRT 0xff100000 -#define PALMTX_NAND_CLE_VIRT 0xff200000 +#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000) +#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000) /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index b9b1bdc4bac..7cff640582b 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -1,6 +1,7 @@ #ifndef __MACH_PXA27x_H #define __MACH_PXA27x_H +#include <linux/suspend.h> #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> @@ -21,6 +22,7 @@ extern void __init pxa27x_map_io(void); extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern void pxa27x_cpu_pm_enter(suspend_state_t state); #define pxa27x_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h new file mode 100644 index 00000000000..cbb097c4cb1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa95x.h @@ -0,0 +1,7 @@ +#ifndef __MACH_PXA95X_H +#define __MACH_PXA95X_H + +#include <mach/pxa3xx.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 01a45ac4811..486b4c519ae 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -158,5 +158,18 @@ struct pxafb_mach_info { void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); +#ifdef CONFIG_FB_PXA_SMARTPANEL extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); extern int pxafb_smart_flush(struct fb_info *info); +#else +static inline int pxafb_smart_queue(struct fb_info *info, + uint16_t *cmds, int n) +{ + return 0; +} + +static inline int pxafb_smart_flush(struct fb_info *info) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index 654adc90c9a..b7de471b273 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -13,7 +13,7 @@ #define PXA2XX_SMEMC_BASE 0x48000000 #define PXA3XX_SMEMC_BASE 0x4a000000 -#define SMEMC_VIRT 0xf6000000 +#define SMEMC_VIRT IOMEM(0xf6000000) #define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */ #define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index 0641f31a56b..56024f81d57 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -68,7 +68,7 @@ * Be gentle, and remap that over 32kB... */ -#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD IOMEM(0xf0000000) #define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) #define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) #define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) @@ -76,7 +76,7 @@ /* CPLD register bits */ #define ZEUS_CPLD_CONTROL_CF_RST 0x01 -#define ZEUS_PC104IO (0xf1000000) +#define ZEUS_PC104IO IOMEM(0xf1000000) #define ZEUS_SRAM_SIZE (256 * 1024) diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index ea24998b923..ecca976f03d 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -19,7 +19,7 @@ extern int wm9713_irq; extern int lcd_id; extern int lcd_orientation; -#ifdef CONFIG_CPU_PXA300 +#ifdef CONFIG_MACH_ZYLONITE300 extern void zylonite_pxa300_init(void); #else static inline void zylonite_pxa300_init(void) @@ -29,7 +29,7 @@ static inline void zylonite_pxa300_init(void) } #endif -#ifdef CONFIG_CPU_PXA320 +#ifdef CONFIG_MACH_ZYLONITE320 extern void zylonite_pxa320_init(void); #else static inline void zylonite_pxa320_init(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index ca607571782..532c5d3a97d 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -23,11 +22,11 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include "generic.h" -#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000) +#define IRQ_BASE io_p2v(0x40d00000) #define ICIP (0x000) #define ICMR (0x004) @@ -65,7 +64,7 @@ static inline void __iomem *irq_base(int i) 0x40d00130, }; - return (void __iomem *)io_p2v(phys_base[i]); + return io_p2v(phys_base[i]); } void pxa_mask_irq(struct irq_data *d) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 16df0fc0879..1dd530279e0 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -39,7 +39,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -480,7 +479,7 @@ static void __init lpd270_init(void) static struct map_desc lpd270_io_desc[] __initdata = { { - .virtual = LPD270_CPLD_VIRT, + .virtual = (unsigned long)LPD270_CPLD_VIRT, .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), .length = LPD270_CPLD_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a8c696bfc13..c48ce6da918 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -42,7 +43,6 @@ #include <asm/hardware/sa1111.h> #include <mach/pxa25x.h> -#include <mach/gpio.h> #include <mach/audio.h> #include <mach/lubbock.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index cc6e14f6d11..0567d3965fd 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -12,7 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> @@ -43,7 +43,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/gpio.h> #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b27544bcafc..43a5f6861ca 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -12,15 +12,15 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/syscore_ops.h> -#include <mach/gpio.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> +#include <mach/gpio-pxa.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 7346fbfa810..94e9708b349 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -423,6 +423,7 @@ static void __init palmphone_common_init(void) palmtreo_leds_init(); } +#ifdef CONFIG_MACH_TREO680 static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); @@ -430,7 +431,9 @@ static void __init treo680_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); } +#endif +#ifdef CONFIG_MACH_CENTRO static void __init centro_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); @@ -438,7 +441,9 @@ static void __init centro_init(void) palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1, GPIO_NR_CENTRO_SD_POWER, 1); } +#endif +#ifdef CONFIG_MACH_TREO680 MACHINE_START(TREO680, "Palm Treo 680") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -448,7 +453,9 @@ MACHINE_START(TREO680, "Palm Treo 680") .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_CENTRO MACHINE_START(CENTRO, "Palm Centro 685") .atag_offset = 0x100, .map_io = pxa27x_map_io, @@ -458,3 +465,4 @@ MACHINE_START(CENTRO, "Palm Centro 685") .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 2b9e76fc2c9..4e3e45927e9 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -247,7 +247,7 @@ static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + char __iomem *nandaddr = this->IO_ADDR_W; if (cmd == NAND_CMD_NONE) return; @@ -315,17 +315,17 @@ static inline void palmtx_nand_init(void) {} ******************************************************************************/ static struct map_desc palmtx_io_desc[] __initdata = { { - .virtual = PALMTX_PCMCIA_VIRT, + .virtual = (unsigned long)PALMTX_PCMCIA_VIRT, .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), .length = PALMTX_PCMCIA_SIZE, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_ALE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS), .length = SZ_1M, .type = MT_DEVICE, }, { - .virtual = PALMTX_NAND_CLE_VIRT, + .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT, .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS), .length = SZ_1M, .type = MT_DEVICE, diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d5b7e06212..9a9c539f6c0 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -19,7 +19,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -28,7 +28,6 @@ #include <media/soc_camera.h> -#include <asm/gpio.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index a113ea9ab4a..948ce3e729f 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -454,8 +454,8 @@ static void __init poodle_init(void) poodle_init_spi(); } -static void __init fixup_poodle(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_poodle(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9c434d21a27..f05f9486b0c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,12 +24,12 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/pm.h> @@ -324,7 +325,7 @@ void __init pxa26x_init_irq(void) static struct map_desc pxa25x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9d2400b5f50..bc5a98ebaa7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,13 +21,13 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/pxa27x.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -390,7 +391,7 @@ void __init pxa27x_init_irq(void) static struct map_desc pxa27x_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index ce7168b233e..e28dfb88827 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -265,6 +265,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host) return err; } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc); void pxa3xx_u2d_stop_hc(struct usb_bus *host) { @@ -277,6 +278,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host) clk_disable(u2d->clk); } +EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc); static int pxa3xx_u2d_probe(struct platform_device *pdev) { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index b5cd9e5aba3..0737c59b88a 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -12,7 +12,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -26,7 +25,7 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -394,7 +393,7 @@ void __init pxa3xx_init_irq(void) static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ - .virtual = SMEMC_VIRT, + .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE), .length = 0x00200000, .type = MT_DEVICE diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 0ee166b61f8..51371b39d2a 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -21,7 +20,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio.h> +#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 602d70b50f8..fc2c1e05af9 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -540,7 +540,7 @@ static struct mtd_partition saar_onenand_partitions[] = { }, { .name = "filesystem", .offset = MTDPART_OFS_APPEND, - .size = SZ_48M, + .size = SZ_32M + SZ_16M, .mask_flags = 0, } }; diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 5ce340320ab..3e999e308a2 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -9,12 +9,13 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -23,7 +24,7 @@ #include <mach/hardware.h> #include <mach/mfp.h> #include <mach/mfp-pxa930.h> -#include <mach/gpio.h> +#include <mach/pxa95x.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 438c7b5e451..d8dec9113aa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -970,8 +970,8 @@ static void __init spitz_init(void) spitz_i2c_init(); } -static void __init spitz_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init spitz_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks = 1; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9f69a268269..402b0c96613 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -960,8 +960,8 @@ static void __init tosa_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static void __init fixup_tosa(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init fixup_tosa(struct tag *tags, char **cmdline, + struct meminfo *mi) { sharpsl_save_param(); mi->nr_banks=1; diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 54930cccbe5..70e1730ef28 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = { /* We have to state that there are HWMON devices on the I2C bus on XCEP. * Drivers for HWMON verify capabilities of the adapter when loading and - * refuse to attach if the adapter doesn't support HWMON class of devices. - * See also Documentation/i2c/porting-clients. */ + * refuse to attach if the adapter doesn't support HWMON class of devices. */ static struct i2c_pxa_platform_data xcep_i2c_platform_data = { .class = I2C_CLASS_HWMON }; diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 84ed72de53b..ead32c90fec 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -686,7 +686,8 @@ static void z2_power_off(void) */ PSPR = 0x0; local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET); + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); + pxa27x_cpu_pm_enter(PM_SUSPEND_MEM); } #else #define z2_power_off NULL diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index c424e7d85ce..498b83b089f 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -860,25 +860,25 @@ static void __init zeus_init(void) static struct map_desc zeus_io_desc[] __initdata = { { - .virtual = ZEUS_CPLD_VERSION, + .virtual = (unsigned long)ZEUS_CPLD_VERSION, .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_ISA_IRQ, + .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ, .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_CONTROL, + .virtual = (unsigned long)ZEUS_CPLD_CONTROL, .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS), .length = 0x1000, .type = MT_DEVICE, }, { - .virtual = ZEUS_PC104IO, + .virtual = (unsigned long)ZEUS_PC104IO, .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), .length = 0x00800000, .type = MT_DEVICE, diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot index d97e003d3df..d2c3d788f68 100644 --- a/arch/arm/mach-realview/Makefile.boot +++ b/arch/arm/mach-realview/Makefile.boot @@ -1,9 +1,9 @@ ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y := 0x70008000 + zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70800000 else - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 endif diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 5c23450d2d1..d5ed5d4f77d 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -517,8 +517,7 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Setup the memory banks. */ -void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, - struct meminfo *meminfo) +void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 5c83d1e87a0..47259c89a75 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -63,8 +63,8 @@ extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); -extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, - char **from, struct meminfo *meminfo); +extern void realview_fixup(struct tag *tags, char **from, + struct meminfo *meminfo); extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index a87523d095e..ac1aed2a8da 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -69,7 +69,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) : : "memory", "cc"); - if (pen_release == cpu) { + if (pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 002ab5d8c11..2a15fef9473 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -70,6 +70,7 @@ #define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ #define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */ #define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index fb4901c4ef0..8cc372dc66a 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -10,23 +10,10 @@ * published by the Free Software Foundation. */ -#if defined(CONFIG_MACH_REALVIEW_EB) || \ - defined(CONFIG_MACH_REALVIEW_PB11MP) || \ - defined(CONFIG_MACH_REALVIEW_PBA8) || \ - defined(CONFIG_MACH_REALVIEW_PBX) -#ifndef DEBUG_LL_UART_OFFSET +#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT #define DEBUG_LL_UART_OFFSET 0x00009000 -#elif DEBUG_LL_UART_OFFSET != 0x00009000 -#warning "DEBUG_LL_UART_OFFSET already defined to a different value" -#endif -#endif - -#ifdef CONFIG_MACH_REALVIEW_PB1176 -#ifndef DEBUG_LL_UART_OFFSET +#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT) #define DEBUG_LL_UART_OFFSET 0x0010c000 -#elif DEBUG_LL_UART_OFFSET != 0x0010c000 -#warning "DEBUG_LL_UART_OFFSET already defined to a different value" -#endif #endif #ifndef DEBUG_LL_UART_OFFSET diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h index 94ff27678a4..40a8c178f10 100644 --- a/arch/arm/mach-realview/include/mach/gpio.h +++ b/arch/arm/mach-realview/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 7263dea7777..c057540ec77 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -26,6 +26,8 @@ #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> #include <linux/io.h> #include <mach/hardware.h> @@ -204,22 +206,48 @@ static struct amba_device *amba_devs[] __initdata = { * RealView PB1176 platform devices */ static struct resource realview_pb1176_flash_resources[] = { - [0] = { + { .start = REALVIEW_PB1176_FLASH_BASE, .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }, - [1] = { +#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH + { .start = REALVIEW_PB1176_SEC_FLASH_BASE, .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }, -}; -#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH -#define PB1176_FLASH_BLOCKS 2 -#else -#define PB1176_FLASH_BLOCKS 1 #endif +}; + +static struct physmap_flash_data pb1176_rom_pdata = { + .probe_type = "map_rom", + .width = 4, + .nr_parts = 0, +}; + +static struct resource pb1176_rom_resources[] = { + /* + * This exposes the PB1176 DevChip ROM as an MTD ROM mapping. + * The reference manual states that this is actually a pseudo-ROM + * programmed in NVRAM. + */ + { + .start = REALVIEW_DC1176_ROM_BASE, + .end = REALVIEW_DC1176_ROM_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device pb1176_rom_device = { + .name = "physmap-flash", + .id = -1, + .num_resources = ARRAY_SIZE(pb1176_rom_resources), + .resource = pb1176_rom_resources, + .dev = { + .platform_data = &pb1176_rom_pdata, + }, +}; static struct resource realview_pb1176_smsc911x_resources[] = { [0] = { @@ -316,8 +344,7 @@ static void realview_pb1176_reset(char mode) __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl); } -static void realview_pb1176_fixup(struct machine_desc *mdesc, - struct tag *tags, char **from, +static void realview_pb1176_fixup(struct tag *tags, char **from, struct meminfo *meminfo) { /* @@ -338,7 +365,8 @@ static void __init realview_pb1176_init(void) #endif realview_flash_register(realview_pb1176_flash_resources, - PB1176_FLASH_BLOCKS); + ARRAY_SIZE(realview_pb1176_flash_resources)); + platform_device_register(&pb1176_rom_device); realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 8ec7e52618b..63c4114afae 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -319,8 +319,8 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; -static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, - char **from, struct meminfo *meminfo) +static void realview_pbx_fixup(struct tag *tags, char **from, + struct meminfo *meminfo) { #ifdef CONFIG_SPARSEMEM /* @@ -335,7 +335,7 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, meminfo->bank[2].size = SZ_256M; meminfo->nr_banks = 3; #else - realview_fixup(mdesc, tags, from, meminfo); + realview_fixup(tags, from, meminfo); #endif } diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot index 9c9e7685ec7..ae2df0d7d03 100644 --- a/arch/arm/mach-rpc/Makefile.boot +++ b/arch/arm/mach-rpc/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x10008000 + zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x18000000 diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index dde6b3c0e29..050d63c74cc 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -36,7 +36,7 @@ #define EASI_SIZE 0x08000000 /* EASI I/O */ #define EASI_START 0x08000000 -#define EASI_BASE 0xe5000000 +#define EASI_BASE IOMEM(0xe5000000) #define IO_START 0x03000000 /* I/O */ #define IO_SIZE 0x01000000 @@ -51,21 +51,20 @@ /* * IO Addresses */ -#define VIDC_BASE IOMEM(0xe0400000) -#define EXPMASK_BASE 0xe0360000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define PCIO_BASE IOMEM(0xe0010000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) +#define ECARD_EASI_BASE (EASI_BASE) +#define VIDC_BASE (IO_BASE + 0x00400000) +#define EXPMASK_BASE (IO_BASE + 0x00360000) +#define ECARD_IOC4_BASE (IO_BASE + 0x00270000) +#define ECARD_IOC_BASE (IO_BASE + 0x00240000) +#define IOMD_BASE (IO_BASE + 0x00200000) +#define IOC_BASE (IO_BASE + 0x00200000) +#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000) +#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000) +#define PCIO_BASE (IO_BASE + 0x00010000) +#define ECARD_MEMC_BASE (IO_BASE + 0x00000000) #define vidc_writel(val) __raw_writel(val, VIDC_BASE) -#define IO_EC_EASI_BASE 0x81400000 -#define IO_EC_IOC4_BASE 0x8009c000 -#define IO_EC_IOC_BASE 0x80090000 -#define IO_EC_MEMC8_BASE 0x8000ac00 -#define IO_EC_MEMC_BASE 0x80000000 - #define NETSLOT_BASE 0x0302b000 #define NETSLOT_SIZE 0x00001000 diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h index 20da7f486e5..695f4ed2e11 100644 --- a/arch/arm/mach-rpc/include/mach/io.h +++ b/arch/arm/mach-rpc/include/mach/io.h @@ -15,195 +15,18 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffff /* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions. - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__deprecated __ioaddr(unsigned int port) -{ - void __iomem *ret; - if (__PORT_PCIO(port)) - ret = PCIO_BASE; - else - ret = IO_BASE; - return ret + (port << 2); -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions + * We need PC style IO addressing for: + * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7) + * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a) + * - 8250 serial (only for compile) * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. + * These peripherals are found in an area of MMIO which looks very much + * like an ISA bus, but with registers at the low byte of each word. */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) - -/* the following macro is deprecated */ -#define ioaddr(port) ((unsigned long)__ioaddr((port))) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define __io(a) (PCIO_BASE + ((a) << 2)) /* * 1:1 mapping for ioremapped regions. diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index a9241eb8772..8559598ab76 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -74,7 +74,7 @@ static struct map_desc rpc_io_desc[] __initdata = { .length = IO_SIZE , .type = MT_DEVICE }, { /* EASI space */ - .virtual = EASI_BASE, + .virtual = (unsigned long)EASI_BASE, .pfn = __phys_to_pfn(EASI_START), .length = EASI_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55795d..3700cf32af0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2410 select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +27,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 81695353d8f..782fd81144e 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c2410/Makefile.boot index 58c1dd7f8e1..4457605ba04 100644 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ b/arch/arm/mach-s3c2410/Makefile.boot @@ -1,7 +1,7 @@ ifeq ($(CONFIG_PM_H1940),y) - zreladdr-y := 0x30108000 + zreladdr-y += 0x30108000 params_phys-y := 0x30100100 else - zreladdr-y := 0x30008000 + zreladdr-y += 0x30008000 params_phys-y := 0x30000100 endif diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 0d8e043804c..dbe43df8cfe 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c deleted file mode 100644 index 9664e011dae..00000000000 --- a/arch/arm/mach-s3c2410/gpio.c +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) - return -EINVAL; - - config &= 0xff; - - pin -= S3C2410_GPG(8); - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index f7f6b07df30..6fac70f3484 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -11,11 +11,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* some boards require extra gpio capacity to support external * devices that need GPIO. */ @@ -28,7 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #endif -#include <asm-generic/gpio.h> #include <mach/gpio-nrs.h> #include <mach/gpio-fns.h> diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index 97e42bfce81..fc897d3a056 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H -#include <mach/gpio.h> +#include <asm/gpio.h> #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h index 9813dbf2ae4..118749f37c4 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c2410/include/mach/io.h @@ -199,8 +199,6 @@ DECLARE_IO(int,l,"") #define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) #define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) #define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) #define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) #define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 425552d84b6..4cf495f813a 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -14,9 +14,53 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> -#include <plat/map.h> -#define S3C2410_ADDR(x) S3C_ADDR(x) +/* + * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x4000) + +#include <plat/map-s3c.h> + +/* + * interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + +/* Timers */ +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_UART SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_GPIO SZ_1M /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) @@ -75,10 +119,8 @@ /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) #define S3C2412_PA_EBI (0x48800000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) /* physical addresses of all the chip-select areas */ @@ -100,12 +142,10 @@ #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG #define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e56998..b8b9029e9f2 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91ea39..7e4d95fa8a9 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 7abecfca0b7..c61e3261615 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, - .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c deleted file mode 100644 index 3404a876b33..00000000000 --- a/arch/arm/mach-s3c2412/gpio.c +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/gpio.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * S3C2412/S3C2413 specific GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-gpio.h> -#include <mach/hardware.h> - -#include <plat/gpio-core.h> - -int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - unsigned long flags; - unsigned long slpcon; - - offs *= 2; - - if (pin < S3C2410_GPB(0)) - return -EINVAL; - - if (pin >= S3C2410_GPF(0) && - pin <= S3C2410_GPG(16)) - return -EINVAL; - - if (pin > S3C2410_GPH(16)) - return -EINVAL; - - local_irq_save(flags); - - slpcon = __raw_readl(chip->base + 0x0C); - - slpcon &= ~(3 << offs); - slpcon |= state << offs; - - __raw_writel(slpcon, chip->base + 0x0C); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg); diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index d6325ede9f2..f1eec1b5493 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -92,8 +92,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_usbgadget, }; -static void __init smdk2413_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, +static void __init smdk2413_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 5955c15018b..1bbb1ef5f4f 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -129,9 +129,8 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_nand, }; -static void __init vstms_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, - struct meminfo *mi) +static void __init vstms_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { mi->nr_banks=1; diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3f91c..c461fb8e15c 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2440 select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -20,7 +19,6 @@ config CPU_S3C2442 select CPU_ARM920T select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 3b0529f54e9..0e73f8f9d13 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 3f658685ec1..fe52151d2e8 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2443_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2443_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels = MAP(S3C2443_DMAREQSEL_PCMIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels = MAP(S3C2443_DMAREQSEL_MICIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, }; diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot index ba41fdc0a58..c642333af3e 100644 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ b/arch/arm/mach-s3c64xx/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x50008000 + zreladdr-y += 0x50008000 params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 8dc05763a7e..c7047838e11 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -44,16 +44,16 @@ static const char name_s3c6410[] = "S3C6410"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x36400000, - .idmask = 0xfffff000, + .idcode = S3C6400_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, .init_clocks = s3c6400_init_clocks, .init_uarts = s3c6400_init_uarts, .init = s3c6400_init, .name = name_s3c6400, }, { - .idcode = 0x36410100, - .idmask = 0xffffff00, + .idcode = S3C6410_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, .init_clocks = s3c6410_init_clocks, .init_uarts = s3c6410_init_uarts, @@ -141,23 +141,15 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; - /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); init_consistent_dma_size(SZ_8M); - idcode = __raw_readl(S3C_VA_SYS + 0x118); - if (!idcode) { - /* S3C6400 has the ID register in a different place, - * and needs a write before it can be read. */ - - __raw_writel(0x0, S3C_VA_SYS + 0xA1C); - idcode = __raw_readl(S3C_VA_SYS + 0xA1C); - } + /* detect cpu id */ + s3c64xx_init_cpu(); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } static __init int s3c64xx_sysdev_init(void) diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index f797f748b99..c681b99eda0 100644 --- a/arch/arm/mach-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_RX0, + .start = IRQ_UART0, + .end = IRQ_UART0, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = IRQ_S3CUART_TX0, - .end = IRQ_S3CUART_TX0, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } }; static struct resource s3c64xx_uart1_resource[] = { @@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX1, - .end = IRQ_S3CUART_TX1, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR1, - .end = IRQ_S3CUART_ERR1, + .start = IRQ_UART1, + .end = IRQ_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX2, - .end = IRQ_S3CUART_TX2, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR2, - .end = IRQ_S3CUART_ERR2, + .start = IRQ_UART2, + .end = IRQ_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S3CUART_RX3, - .end = IRQ_S3CUART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX3, - .end = IRQ_S3CUART_TX3, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR3, - .end = IRQ_S3CUART_ERR3, + .start = IRQ_UART3, + .end = IRQ_UART3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 0d46e994048..6e34c2f6e67 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -12,11 +12,6 @@ * published by the Free Software Foundation. */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -96,5 +91,3 @@ enum s3c_gpio_number { #define BOARD_NR_GPIOS 16 #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) - -#include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index c026f67a80d..443f85b3c20 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -27,36 +27,6 @@ #define IRQ_VIC0_BASE S3C_IRQ(0) #define IRQ_VIC1_BASE S3C_IRQ(32) -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S3CUART_BASE0 (16) -#define IRQ_S3CUART_BASE1 (20) -#define IRQ_S3CUART_BASE2 (24) -#define IRQ_S3CUART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) -#define UART_IRQ_MODEM (3) - -#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) - /* VIC based IRQs */ #define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index a1f13f02c84..23a1d71e4d5 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s3c.h> /* * Post-mux Chip Select Regions Xm0CSn_ @@ -83,7 +84,6 @@ #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) @@ -94,16 +94,10 @@ #define S3C64XX_PA_VIC1 (0x71300000) #define S3C64XX_PA_MODEM (0x74108000) -#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) #define S3C64XX_PA_USBHOST (0x74300000) #define S3C64XX_PA_USB_HSPHY (0x7C100000) -#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) - -/* place VICs close together */ -#define VA_VIC0 (S3C_VA_IRQ + 0x00) -#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER @@ -119,7 +113,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG -#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #define S3C_PA_RTC S3C64XX_PA_RTC #define S3C_PA_WDT S3C64XX_PA_WATCHDOG diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 75d9a0e4919..b07357e9495 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -25,29 +25,6 @@ #include <plat/irq-uart.h> #include <plat/cpu.h> -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = S3C_VA_UART0, - .base_irq = IRQ_S3CUART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S3C_VA_UART1, - .base_irq = IRQ_S3CUART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S3C_VA_UART2, - .base_irq = IRQ_S3CUART_BASE2, - .parent_irq = IRQ_UART2, - }, - [3] = { - .regs = S3C_VA_UART3, - .base_irq = IRQ_S3CUART_BASE3, - .parent_irq = IRQ_UART3, - }, -}; - /* setup the sources the vic should advertise resume for, even though it * is not doing the wake (set_irq_wake needs to be valid) */ #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) @@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) /* add the timer sub-irqs */ s3c_init_vic_timer_irq(5, IRQ_TIMER0); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 4c76e08423f..806580388f3 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -329,9 +329,6 @@ static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_ts, &s3c_device_timer[0], &s3c64xx_device_iis0, &s3c64xx_device_iis1, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index e91f63f7a49..fb8969aa412 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = { .dev.platform_data = &mini6410_lcd_power_data, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static struct platform_device *mini6410_devices[] __initdata = { &mini6410_device_eth, &s3c_device_hsmmc0, @@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void) s3c_nand_set_platdata(&mini6410_nand_info); s3c_fb_set_platdata(&mini6410_lcd_pdata); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 10870cb5b39..93170d4834e 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -198,12 +198,6 @@ static struct platform_device *real6410_devices[] __initdata = { &s3c_device_ohci, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static void __init real6410_map_io(void) { u32 tmp; @@ -300,7 +294,7 @@ static void __init real6410_machine_init(void) s3c_fb_set_platdata(&real6410_lcd_pdata); s3c_nand_set_platdata(&real6410_nand_info); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 7b66ede9fbc..5f147c33eda 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -619,12 +619,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { .no = S3C64XX_GPF(15), @@ -666,7 +660,7 @@ static void __init smdk6410_machine_init(void) samsung_keypad_set_platdata(&smdk6410_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot index ff90aa13bd6..79ece4055b0 100644 --- a/arch/arm/mach-s5p64x0/Makefile.boot +++ b/arch/arm/mach-s5p64x0/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index ac825e82632..1fd9c79c7db 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -21,6 +21,7 @@ #include <mach/regs-clock.h> #include <mach/spi-clocks.h> +#include <plat/cpu.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = { void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) { - unsigned int id; struct s3c64xx_spi_info *pd; - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0 || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { @@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) switch (cntrlr) { case 0: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi0_pdata; else pd = &s5p6440_spi0_pdata; @@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) s5p64x0_device_spi0.dev.platform_data = pd; break; case 1: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi1_pdata; else pd = &s5p6440_spi1_pdata; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index d7ad944b347..0e5b3e63e5b 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -28,6 +28,7 @@ #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <plat/cpu.h> #include <plat/devs.h> #include <plat/s3c-pl330-pdata.h> @@ -133,11 +134,7 @@ static struct platform_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - unsigned int id; - - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - - if (id == 0x50000) + if (soc_is_s5p6450()) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c index e7fb3b004e7..700dac6c43f 100644 --- a/arch/arm/mach-s5p64x0/gpiolib.c +++ b/arch/arm/mach-s5p64x0/gpiolib.c @@ -19,6 +19,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> +#include <plat/cpu.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> @@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, static int __init s5p64x0_gpiolib_init(void) { - unsigned int chipid; - - chipid = __raw_readl(S5P64X0_SYS_ID); - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, ARRAY_SIZE(s5p64x0_gpio_cfgs)); - if ((chipid & 0xff000) == 0x50000) { + if (soc_is_s5p6450()) { samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, ARRAY_SIZE(s5p6450_gpio_2bit)); diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h index adb5f298ead..06cd3c9b16a 100644 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5P6440_GPIO_A_NR (6) @@ -134,6 +129,4 @@ enum s5p6450_gpio_number { #define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index fe7380f5c3c..494e1a8f6f6 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/regs-irqtype.h> #include <plat/gpio-cfg.h> @@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) __raw_writel(ctrl, S5P64X0_EINT0CON0); /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + if (soc_is_s5p6450()) s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); else s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 3b84e9bfd07..88857f5a49f 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -129,12 +129,6 @@ static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { /* To be populated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { .no = S5P6440_GPF(15), @@ -155,7 +149,7 @@ static void __init smdk6440_map_io(void) static void __init smdk6440_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6440_i2c0_data); s3c_i2c1_set_platdata(&s5p6440_i2c1_data); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index d99d29b5558..e1b277b9461 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -148,12 +148,6 @@ static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { .no = S5P6450_GPF(15), @@ -174,7 +168,7 @@ static void __init smdk6450_map_io(void) static void __init smdk6450_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6450_i2c0_data); s3c_i2c1_set_platdata(&s5p6450_i2c1_data); diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot index ff90aa13bd6..79ece4055b0 100644 --- a/arch/arm/mach-s5pc100/Makefile.boot +++ b/arch/arm/mach-s5pc100/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4..5e1a924b595 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -15,11 +15,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* GPIO bank sizes */ #define S5PC100_GPIO_A0_NR (8) #define S5PC100_GPIO_A1_NR (5) @@ -146,6 +141,4 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 688f45b7cd0..26f5c91c942 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -203,12 +203,6 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5pc100_device_spdif, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { .no = S5PC100_GPD(0), @@ -228,7 +222,7 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* I2C */ s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 69dd87cd8e2..aaeb44a7371 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -14,7 +14,6 @@ config CPU_S5PV210 select S3C_PL330_DMA select S5P_EXT_INT select S5P_HRT - select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -169,9 +168,4 @@ config MACH_TORBRECK endmenu -config S5PV210_PM - bool - help - Power Management code common to S5PV210 - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 599a3c0e8f6..ef7e4668d67 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o -obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o # machine support diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot index ff90aa13bd6..79ece4055b0 100644 --- a/arch/arm/mach-s5pv210/Makefile.boot +++ b/arch/arm/mach-s5pv210/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index a5a1e331f8e..6c8b903c02e 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -13,11 +13,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - /* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ @@ -142,6 +137,4 @@ enum s5p_gpio_number { #define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) -#include <asm-generic/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index e73e3b6d41b..a9106c39239 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -265,12 +265,6 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { /* To Be Updated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { .no = S5PV210_GPD0(3), @@ -296,7 +290,7 @@ static void __init smdkv210_machine_init(void) smdkv210_dm9000_init(); samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 41252d22e65..ed7408d3216 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := @@ -45,7 +45,6 @@ obj-$(CONFIG_SA1100_PLEB) += pleb.o obj-$(CONFIG_SA1100_SHANNON) += shannon.o obj-$(CONFIG_SA1100_SIMPAD) += simpad.o -led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index a56ad0417cf..5a616f6e561 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,6 +1,7 @@ - zreladdr-y := 0xc0008000 ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) := 0xc0208000 + zreladdr-$(CONFIG_SA1111) += 0xc0208000 +else + zreladdr-y += 0xc0008000 endif params_phys-y := 0xc0000100 initrd_phys-y := 0xc0800000 diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d40da5f1f37..3dd133f1841 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -301,8 +301,7 @@ static void __init get_assabet_scr(void) } static void __init -fixup_assabet(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi) { /* This must be done before any call to machine_has_neponset() */ map_sa1100_gpio_regs(); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e21f3470eec..5fa5ae1f39e 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -9,6 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> -#include <asm/gpio.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c deleted file mode 100644 index 0d3829a8c2c..00000000000 --- a/arch/arm/mach-sa1100/gpio.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/gpio.c - * - * Generic SA-1100 GPIO handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/gpio.h> -#include <mach/hardware.h> -#include "generic.h" - -static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return GPLR & GPIO_GPIO(offset); -} - -static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - GPSR = GPIO_GPIO(offset); - else - GPCR = GPIO_GPIO(offset); -} - -static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long flags; - - local_irq_save(flags); - GPDR &= ~GPIO_GPIO(offset); - local_irq_restore(flags); - return 0; -} - -static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) -{ - unsigned long flags; - - local_irq_save(flags); - sa1100_gpio_set(chip, offset, value); - GPDR |= GPIO_GPIO(offset); - local_irq_restore(flags); - return 0; -} - -static struct gpio_chip sa1100_gpio_chip = { - .label = "gpio", - .direction_input = sa1100_direction_input, - .direction_output = sa1100_direction_output, - .set = sa1100_gpio_set, - .get = sa1100_gpio_get, - .base = 0, - .ngpio = GPIO_MAX + 1, -}; - -void __init sa1100_init_gpio(void) -{ - gpiochip_add(&sa1100_gpio_chip); -} diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index 7befc104e9a..703631887c9 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -28,6 +28,8 @@ #include <asm/irq.h> #include <asm-generic/gpio.h> +#define __ARM_GPIOLIB_COMPLEX + static inline int gpio_get_value(unsigned gpio) { if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) @@ -51,7 +53,5 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \ (IRQ_GPIO11 - 11 + gpio)) -#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \ - (irq - IRQ_GPIO11 + 11)) #endif diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h index d8b43f3dcd2..dfc27ff0834 100644 --- a/arch/arm/mach-sa1100/include/mach/io.h +++ b/arch/arm/mach-sa1100/include/mach/io.h @@ -10,11 +10,9 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - /* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... + * __io() is required to be an equivalent mapping to __mem_pci() for + * SOC_COMMON to work. */ #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h index 9296c4513ce..db28118103e 100644 --- a/arch/arm/mach-sa1100/include/mach/simpad.h +++ b/arch/arm/mach-sa1100/include/mach/simpad.h @@ -48,32 +48,80 @@ #define GPIO_SMART_CARD GPIO_GPIO10 #define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 -// CS3 Latch is write only, a shadow is necessary +/*--- ucb1x00 GPIO ---*/ +#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1) +#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE) +#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1) +#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2) +#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3) +#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4) +#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5) +#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6) +#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7) +#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8) +#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9) + +/*--- CS3 Latch ---*/ +#define SIMPAD_CS3_GPIO_BASE (GPIO_MAX + 11) +#define SIMPAD_CS3_VCC_5V_EN (SIMPAD_CS3_GPIO_BASE) +#define SIMPAD_CS3_VCC_3V_EN (SIMPAD_CS3_GPIO_BASE + 1) +#define SIMPAD_CS3_EN1 (SIMPAD_CS3_GPIO_BASE + 2) +#define SIMPAD_CS3_EN0 (SIMPAD_CS3_GPIO_BASE + 3) +#define SIMPAD_CS3_DISPLAY_ON (SIMPAD_CS3_GPIO_BASE + 4) +#define SIMPAD_CS3_PCMCIA_BUFF_DIS (SIMPAD_CS3_GPIO_BASE + 5) +#define SIMPAD_CS3_MQ_RESET (SIMPAD_CS3_GPIO_BASE + 6) +#define SIMPAD_CS3_PCMCIA_RESET (SIMPAD_CS3_GPIO_BASE + 7) +#define SIMPAD_CS3_DECT_POWER_ON (SIMPAD_CS3_GPIO_BASE + 8) +#define SIMPAD_CS3_IRDA_SD (SIMPAD_CS3_GPIO_BASE + 9) +#define SIMPAD_CS3_RS232_ON (SIMPAD_CS3_GPIO_BASE + 10) +#define SIMPAD_CS3_SD_MEDIAQ (SIMPAD_CS3_GPIO_BASE + 11) +#define SIMPAD_CS3_LED2_ON (SIMPAD_CS3_GPIO_BASE + 12) +#define SIMPAD_CS3_IRDA_MODE (SIMPAD_CS3_GPIO_BASE + 13) +#define SIMPAD_CS3_ENABLE_5V (SIMPAD_CS3_GPIO_BASE + 14) +#define SIMPAD_CS3_RESET_SIMCARD (SIMPAD_CS3_GPIO_BASE + 15) + +#define SIMPAD_CS3_PCMCIA_BVD1 (SIMPAD_CS3_GPIO_BASE + 16) +#define SIMPAD_CS3_PCMCIA_BVD2 (SIMPAD_CS3_GPIO_BASE + 17) +#define SIMPAD_CS3_PCMCIA_VS1 (SIMPAD_CS3_GPIO_BASE + 18) +#define SIMPAD_CS3_PCMCIA_VS2 (SIMPAD_CS3_GPIO_BASE + 19) +#define SIMPAD_CS3_LOCK_IND (SIMPAD_CS3_GPIO_BASE + 20) +#define SIMPAD_CS3_CHARGING_STATE (SIMPAD_CS3_GPIO_BASE + 21) +#define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22) +#define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23) -#define CS3BUSTYPE unsigned volatile long #define CS3_BASE 0xf1000000 -#define VCC_5V_EN 0x0001 // For 5V PCMCIA -#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA -#define EN1 0x0004 // This is only for EPROM's -#define EN0 0x0008 // Both should be enable for 3.3V or 5V -#define DISPLAY_ON 0x0010 -#define PCMCIA_BUFF_DIS 0x0020 -#define MQ_RESET 0x0040 -#define PCMCIA_RESET 0x0080 -#define DECT_POWER_ON 0x0100 -#define IRDA_SD 0x0200 // Shutdown for powersave -#define RS232_ON 0x0400 -#define SD_MEDIAQ 0x0800 // Shutdown for powersave -#define LED2_ON 0x1000 -#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode -#define ENABLE_5V 0x4000 // Enable 5V circuit -#define RESET_SIMCARD 0x8000 - -#define RS232_ENABLE 0x0440 -#define PCMCIAMASK 0x402f - - +long simpad_get_cs3_ro(void); +long simpad_get_cs3_shadow(void); +void simpad_set_cs3_bit(int value); +void simpad_clear_cs3_bit(int value); + +#define VCC_5V_EN 0x0001 /* For 5V PCMCIA */ +#define VCC_3V_EN 0x0002 /* FOR 3.3V PCMCIA */ +#define EN1 0x0004 /* This is only for EPROM's */ +#define EN0 0x0008 /* Both should be enable for 3.3V or 5V */ +#define DISPLAY_ON 0x0010 +#define PCMCIA_BUFF_DIS 0x0020 +#define MQ_RESET 0x0040 +#define PCMCIA_RESET 0x0080 +#define DECT_POWER_ON 0x0100 +#define IRDA_SD 0x0200 /* Shutdown for powersave */ +#define RS232_ON 0x0400 +#define SD_MEDIAQ 0x0800 /* Shutdown for powersave */ +#define LED2_ON 0x1000 +#define IRDA_MODE 0x2000 /* Fast/Slow IrDA mode */ +#define ENABLE_5V 0x4000 /* Enable 5V circuit */ +#define RESET_SIMCARD 0x8000 + +#define PCMCIA_BVD1 0x01 +#define PCMCIA_BVD2 0x02 +#define PCMCIA_VS1 0x04 +#define PCMCIA_VS2 0x08 +#define LOCK_IND 0x10 +#define CHARGING_STATE 0x20 +#define PCMCIA_SHORT 0x40 + +/*--- Battery ---*/ struct simpad_battery { unsigned char ac_status; /* line connected yes/no */ unsigned char status; /* battery loading yes/no */ diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c deleted file mode 100644 index d50f4eeaa12..00000000000 --- a/arch/arm/mach-sa1100/leds-simpad.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/leds-simpad.c - * - * Author: Juergen Messerer <juergen.messerer@siemens.ch> - */ -#include <linux/init.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/system.h> -#include <mach/simpad.h> - -#include "leds.h" - - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 - -static unsigned int led_state; -static unsigned int hw_led_state; - -#define LED_GREEN (1) -#define LED_MASK (1) - -extern void set_cs3_bit(int value); -extern void clear_cs3_bit(int value); - -void simpad_leds_event(led_event_t evt) -{ - switch (evt) - { - case led_start: - hw_led_state = LED_GREEN; - led_state = LED_STATE_ENABLED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = LED_GREEN; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = LED_GREEN; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= LED_GREEN; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - break; - - case led_idle_end: - break; -#endif - - case led_halted: - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= LED_GREEN; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~LED_GREEN; - break; - - case led_amber_on: - break; - - case led_amber_off: - break; - - case led_red_on: - break; - - case led_red_off: - break; - - default: - break; - } - - if (led_state & LED_STATE_ENABLED) - set_cs3_bit(LED2_ON); - else - clear_cs3_bit(LED2_ON); -} - diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c index bbfe197fb4d..5fe71a0f105 100644 --- a/arch/arm/mach-sa1100/leds.c +++ b/arch/arm/mach-sa1100/leds.c @@ -42,8 +42,6 @@ sa1100_leds_init(void) leds_event = adsbitsy_leds_event; if (machine_is_pt_system3()) leds_event = system3_leds_event; - if (machine_is_simpad()) - leds_event = simpad_leds_event; /* what about machine registry? including led, apm... -zecke */ leds_event(led_start); return 0; diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h index 68cc9f773d6..776b6020f55 100644 --- a/arch/arm/mach-sa1100/leds.h +++ b/arch/arm/mach-sa1100/leds.h @@ -11,4 +11,3 @@ extern void pfs168_leds_event(led_event_t evt); extern void graphicsmaster_leds_event(led_event_t evt); extern void adsbitsy_leds_event(led_event_t evt); extern void system3_leds_event(led_event_t evt); -extern void simpad_leds_event(led_event_t evt); diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index a1c2427655d..4790f3f3d00 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -13,6 +13,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> +#include <linux/gpio.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -28,35 +29,92 @@ #include <linux/serial_core.h> #include <linux/ioport.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <linux/i2c-gpio.h> #include "generic.h" -long cs3_shadow; +/* + * CS3 support + */ -long get_cs3_shadow(void) +static long cs3_shadow; +static spinlock_t cs3_lock; +static struct gpio_chip cs3_gpio; + +long simpad_get_cs3_ro(void) +{ + return readl(CS3_BASE); +} +EXPORT_SYMBOL(simpad_get_cs3_ro); + +long simpad_get_cs3_shadow(void) { return cs3_shadow; } +EXPORT_SYMBOL(simpad_get_cs3_shadow); -void set_cs3(long value) +static void __simpad_write_cs3(void) { - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow = value; + writel(cs3_shadow, CS3_BASE); } -void set_cs3_bit(int value) +void simpad_set_cs3_bit(int value) { + unsigned long flags; + + spin_lock_irqsave(&cs3_lock, flags); cs3_shadow |= value; - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow; + __simpad_write_cs3(); + spin_unlock_irqrestore(&cs3_lock, flags); } +EXPORT_SYMBOL(simpad_set_cs3_bit); -void clear_cs3_bit(int value) +void simpad_clear_cs3_bit(int value) { + unsigned long flags; + + spin_lock_irqsave(&cs3_lock, flags); cs3_shadow &= ~value; - *(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow; + __simpad_write_cs3(); + spin_unlock_irqrestore(&cs3_lock, flags); } +EXPORT_SYMBOL(simpad_clear_cs3_bit); + +static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset > 15) + return; + if (value) + simpad_set_cs3_bit(1 << offset); + else + simpad_clear_cs3_bit(1 << offset); +}; + +static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 15) + return simpad_get_cs3_ro() & (1 << (offset - 16)); + return simpad_get_cs3_shadow() & (1 << offset); +}; -EXPORT_SYMBOL(set_cs3_bit); -EXPORT_SYMBOL(clear_cs3_bit); +static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 15) + return 0; + return -EINVAL; +}; + +static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + if (offset > 15) + return -EINVAL; + cs3_gpio_set(chip, offset, value); + return 0; +}; static struct map_desc simpad_io_desc[] __initdata = { { /* MQ200 */ @@ -64,9 +122,9 @@ static struct map_desc simpad_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x4b800000), .length = 0x00800000, .type = MT_DEVICE - }, { /* Paules CS3, write only */ - .virtual = 0xf1000000, - .pfn = __phys_to_pfn(0x18000000), + }, { /* Simpad CS3 */ + .virtual = CS3_BASE, + .pfn = __phys_to_pfn(SA1100_CS3_PHYS), .length = 0x00100000, .type = MT_DEVICE }, @@ -78,12 +136,12 @@ static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate) if (port->mapbase == (u_int)&Ser1UTCR0) { if (state) { - clear_cs3_bit(RS232_ON); - clear_cs3_bit(DECT_POWER_ON); + simpad_clear_cs3_bit(RS232_ON); + simpad_clear_cs3_bit(DECT_POWER_ON); }else { - set_cs3_bit(RS232_ON); - set_cs3_bit(DECT_POWER_ON); + simpad_set_cs3_bit(RS232_ON); + simpad_set_cs3_bit(DECT_POWER_ON); } } } @@ -132,6 +190,7 @@ static struct resource simpad_flash_resources [] = { static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; @@ -142,9 +201,10 @@ static void __init simpad_map_io(void) iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc)); - set_cs3_bit (EN1 | EN0 | LED2_ON | DISPLAY_ON | RS232_ON | - ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON); - + /* Initialize CS3 */ + cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON | + RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON); + __simpad_write_cs3(); /* Spinlocks not yet initialized */ sa1100_register_uart_fns(&simpad_port_fns); sa1100_register_uart(0, 3); /* serial interface */ @@ -170,13 +230,14 @@ static void __init simpad_map_io(void) static void simpad_power_off(void) { - local_irq_disable(); // was cli - set_cs3(0x800); /* only SD_MEDIAQ */ + local_irq_disable(); + cs3_shadow = SD_MEDIAQ; + __simpad_write_cs3(); /* Bypass spinlock here */ /* disable internal oscillator, float CS lines */ PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS); - /* enable wake-up on GPIO0 (Assabet...) */ - PWER = GFER = GRER = 1; + /* enable wake-up on GPIO0 */ + PWER = GFER = GRER = PWER_GPIO0; /* * set scratchpad to zero, just in case it is used as a * restart address by the bootloader. @@ -192,6 +253,91 @@ static void simpad_power_off(void) } +/* + * gpio_keys +*/ + +static struct gpio_keys_button simpad_button_table[] = { + { KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" }, +}; + +static struct gpio_keys_platform_data simpad_keys_data = { + .buttons = simpad_button_table, + .nbuttons = ARRAY_SIZE(simpad_button_table), +}; + +static struct platform_device simpad_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &simpad_keys_data, + }, +}; + +static struct gpio_keys_button simpad_polled_button_table[] = { + { KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" }, + { KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" }, + { KEY_UP, SIMPAD_UCB1X00_GPIO_UP, 1, "up button" }, + { KEY_DOWN, SIMPAD_UCB1X00_GPIO_DOWN, 1, "down button" }, + { KEY_LEFT, SIMPAD_UCB1X00_GPIO_LEFT, 1, "left button" }, + { KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" }, +}; + +static struct gpio_keys_platform_data simpad_polled_keys_data = { + .buttons = simpad_polled_button_table, + .nbuttons = ARRAY_SIZE(simpad_polled_button_table), + .poll_interval = 50, +}; + +static struct platform_device simpad_polled_keys = { + .name = "gpio-keys-polled", + .dev = { + .platform_data = &simpad_polled_keys_data, + }, +}; + +/* + * GPIO LEDs + */ + +static struct gpio_led simpad_leds[] = { + { + .name = "simpad:power", + .gpio = SIMPAD_CS3_LED2_ON, + .active_low = 0, + .default_trigger = "default-on", + }, +}; + +static struct gpio_led_platform_data simpad_led_data = { + .num_leds = ARRAY_SIZE(simpad_leds), + .leds = simpad_leds, +}; + +static struct platform_device simpad_gpio_leds = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &simpad_led_data, + }, +}; + +/* + * i2c + */ +static struct i2c_gpio_platform_data simpad_i2c_data = { + .sda_pin = GPIO_GPIO21, + .scl_pin = GPIO_GPIO25, + .udelay = 10, + .timeout = HZ, +}; + +static struct platform_device simpad_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &simpad_i2c_data, + }, +}; /* * MediaQ Video Device @@ -202,7 +348,11 @@ static struct platform_device simpad_mq200fb = { }; static struct platform_device *devices[] __initdata = { - &simpad_mq200fb + &simpad_keys, + &simpad_polled_keys, + &simpad_mq200fb, + &simpad_gpio_leds, + &simpad_i2c, }; @@ -211,6 +361,19 @@ static int __init simpad_init(void) { int ret; + spin_lock_init(&cs3_lock); + + cs3_gpio.label = "simpad_cs3"; + cs3_gpio.base = SIMPAD_CS3_GPIO_BASE; + cs3_gpio.ngpio = 24; + cs3_gpio.set = cs3_gpio_set; + cs3_gpio.get = cs3_gpio_get; + cs3_gpio.direction_input = cs3_gpio_direction_input; + cs3_gpio.direction_output = cs3_gpio_direction_output; + ret = gpiochip_add(&cs3_gpio); + if (ret) + printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); + pm_power_off = simpad_power_off; sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot index 4320f8b9277..e40e24e4ca3 100644 --- a/arch/arm/mach-shark/Makefile.boot +++ b/arch/arm/mach-shark/Makefile.boot @@ -1,2 +1,2 @@ - zreladdr-y := 0x08008000 + zreladdr-y += 0x08008000 diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c index c9e32de4adf..ccd49189bbd 100644 --- a/arch/arm/mach-shark/leds.c +++ b/arch/arm/mach-shark/leds.c @@ -36,7 +36,7 @@ static char led_state; static short hw_led_state; static short saved_state; -static DEFINE_SPINLOCK(leds_lock); +static DEFINE_RAW_SPINLOCK(leds_lock); short sequoia_read(int addr) { outw(addr,0x24); @@ -52,7 +52,7 @@ static void sequoia_leds_event(led_event_t evt) { unsigned long flags; - spin_lock_irqsave(&leds_lock, flags); + raw_spin_lock_irqsave(&leds_lock, flags); hw_led_state = sequoia_read(0x09); @@ -144,7 +144,7 @@ static void sequoia_leds_event(led_event_t evt) if (led_state & LED_STATE_ENABLED) sequoia_write(hw_led_state,0x09); - spin_unlock_irqrestore(&leds_lock, flags); + raw_spin_unlock_irqrestore(&leds_lock, flags); } static int __init leds_init(void) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 1c08ee9de86..498efd99338 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -1,7 +1,7 @@ __ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_MEMORY_START) + 0x8000]') - zreladdr-y := $(__ZRELADDR) + zreladdr-y += $(__ZRELADDR) # Unsupported legacy stuff # diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 5fde49da399..475342bcc95 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -355,14 +355,17 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = gic_spi(83), .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = gic_spi(84), .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = gic_spi(85), .flags = IORESOURCE_IRQ, }, @@ -398,14 +401,17 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = gic_spi(87), .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = gic_spi(88), .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = gic_spi(89), .flags = IORESOURCE_IRQ, }, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b622d8d3ab7..5b7edadf464 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -42,6 +42,7 @@ #include <linux/leds.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> +#include <linux/pm_clock.h> #include <linux/dma-mapping.h> #include <media/sh_mobile_ceu.h> @@ -1411,6 +1412,11 @@ static void __init ap4evb_init(void) sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); + hdmi_init_pm_clock(); fsi_init_pm_clock(); sh7372_pm_init(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index de2253d7f15..3689ad2e915 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,7 +39,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> @@ -811,6 +811,7 @@ static struct usbhs_private usbhs1_private = { }, .driver_param = { .buswait_bwait = 4, + .has_otg = 1, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), .d0_tx_id = SHDMA_SLAVE_USB1_TX, @@ -1071,14 +1072,17 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, }, @@ -1122,14 +1126,17 @@ static struct resource sdhi2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ .flags = IORESOURCE_IRQ, }, [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ .flags = IORESOURCE_IRQ, }, [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, }, @@ -1590,7 +1597,17 @@ static void __init mackerel_init(void) sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device); sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); +#endif + sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device); + sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); hdmi_init_pm_clock(); sh7372_pm_init(); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 06aecb31d9c..c0cdbf997c9 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -35,8 +35,8 @@ extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); extern void sh7372_pm_init(void); -extern void sh7372_cpu_suspend(void); -extern void sh7372_cpu_resume(void); +extern void sh7372_resume_core_standby_a3sm(void); +extern int sh7372_do_idle_a3sm(unsigned long unused); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 2b1bb9e43dd..7bf0890e16b 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -18,31 +18,15 @@ #ifdef CONFIG_GPIOLIB -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned int irq) { return -ENOSYS; } +#else + +#define __ARM_GPIOLIB_COMPLEX + #endif /* CONFIG_GPIOLIB */ #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 24e63a85e66..84532f9629b 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -479,7 +479,12 @@ struct platform_device; struct sh7372_pm_domain { struct generic_pm_domain genpd; + struct dev_power_governor *gov; + void (*suspend)(void); + void (*resume)(void); unsigned int bit_shift; + bool no_debug; + bool stay_on; }; static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) @@ -491,16 +496,24 @@ static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) extern struct sh7372_pm_domain sh7372_a4lc; extern struct sh7372_pm_domain sh7372_a4mp; extern struct sh7372_pm_domain sh7372_d4; +extern struct sh7372_pm_domain sh7372_a4r; extern struct sh7372_pm_domain sh7372_a3rv; extern struct sh7372_pm_domain sh7372_a3ri; +extern struct sh7372_pm_domain sh7372_a3sp; extern struct sh7372_pm_domain sh7372_a3sg; extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd); extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, struct platform_device *pdev); +extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, + struct sh7372_pm_domain *sh7372_sd); #else #define sh7372_init_pm_domain(pd) do { } while(0) #define sh7372_add_device_to_domain(pd, pdev) do { } while(0) +#define sh7372_pm_add_subdomain(pd, sd) do { } while(0) #endif /* CONFIG_PM */ +extern void sh7372_intcs_suspend(void); +extern void sh7372_intcs_resume(void); + #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 739315e30eb..29cdc0522d9 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -606,9 +606,16 @@ static void intcs_demux(unsigned int irq, struct irq_desc *desc) generic_handle_irq(intcs_evt2irq(evtcodeas)); } +static void __iomem *intcs_ffd2; +static void __iomem *intcs_ffd5; + void __init sh7372_init_irq(void) { - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + void __iomem *intevtsa; + + intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE); + intevtsa = intcs_ffd2 + 0x100; + intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE); register_intc_controller(&intca_desc); register_intc_controller(&intcs_desc); @@ -617,3 +624,46 @@ void __init sh7372_init_irq(void) irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); irq_set_chained_handler(evt2irq(0xf80), intcs_demux); } + +static unsigned short ffd2[0x200]; +static unsigned short ffd5[0x100]; + +void sh7372_intcs_suspend(void) +{ + int k; + + for (k = 0x00; k <= 0x30; k += 4) + ffd2[k] = __raw_readw(intcs_ffd2 + k); + + for (k = 0x80; k <= 0xb0; k += 4) + ffd2[k] = __raw_readb(intcs_ffd2 + k); + + for (k = 0x180; k <= 0x188; k += 4) + ffd2[k] = __raw_readb(intcs_ffd2 + k); + + for (k = 0x00; k <= 0x3c; k += 4) + ffd5[k] = __raw_readw(intcs_ffd5 + k); + + for (k = 0x80; k <= 0x9c; k += 4) + ffd5[k] = __raw_readb(intcs_ffd5 + k); +} + +void sh7372_intcs_resume(void) +{ + int k; + + for (k = 0x00; k <= 0x30; k += 4) + __raw_writew(ffd2[k], intcs_ffd2 + k); + + for (k = 0x80; k <= 0xb0; k += 4) + __raw_writeb(ffd2[k], intcs_ffd2 + k); + + for (k = 0x180; k <= 0x188; k += 4) + __raw_writeb(ffd2[k], intcs_ffd2 + k); + + for (k = 0x00; k <= 0x3c; k += 4) + __raw_writew(ffd5[k], intcs_ffd5 + k); + + for (k = 0x80; k <= 0x9c; k += 4) + __raw_writeb(ffd5[k], intcs_ffd5 + k); +} diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 933fb411be0..79612737c5b 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -15,23 +15,61 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/slab.h> -#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/irq.h> +#include <linux/bitrev.h> #include <asm/system.h> #include <asm/io.h> #include <asm/tlbflush.h> +#include <asm/suspend.h> #include <mach/common.h> #include <mach/sh7372.h> -#define SMFRAM 0xe6a70000 -#define SYSTBCR 0xe6150024 -#define SBAR 0xe6180020 -#define APARMBAREA 0xe6f10020 +/* DBG */ +#define DBGREG1 0xe6100020 +#define DBGREG9 0xe6100040 +/* CPGA */ +#define SYSTBCR 0xe6150024 +#define MSTPSR0 0xe6150030 +#define MSTPSR1 0xe6150038 +#define MSTPSR2 0xe6150040 +#define MSTPSR3 0xe6150048 +#define MSTPSR4 0xe615004c +#define PLLC01STPCR 0xe61500c8 + +/* SYSC */ #define SPDCR 0xe6180008 #define SWUCR 0xe6180014 +#define SBAR 0xe6180020 +#define WUPRMSK 0xe6180028 +#define WUPSMSK 0xe618002c +#define WUPSMSK2 0xe6180048 #define PSTR 0xe6180080 +#define WUPSFAC 0xe6180098 +#define IRQCR 0xe618022c +#define IRQCR2 0xe6180238 +#define IRQCR3 0xe6180244 +#define IRQCR4 0xe6180248 +#define PDNSEL 0xe6180254 + +/* INTC */ +#define ICR1A 0xe6900000 +#define ICR2A 0xe6900004 +#define ICR3A 0xe6900008 +#define ICR4A 0xe690000c +#define INTMSK00A 0xe6900040 +#define INTMSK10A 0xe6900044 +#define INTMSK20A 0xe6900048 +#define INTMSK30A 0xe690004c + +/* MFIS */ +#define SMFRAM 0xe6a70000 + +/* AP-System Core */ +#define APARMBAREA 0xe6f10020 #define PSTR_RETRIES 100 #define PSTR_DELAY_US 10 @@ -43,6 +81,12 @@ static int pd_power_down(struct generic_pm_domain *genpd) struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); unsigned int mask = 1 << sh7372_pd->bit_shift; + if (sh7372_pd->suspend) + sh7372_pd->suspend(); + + if (sh7372_pd->stay_on) + return 0; + if (__raw_readl(PSTR) & mask) { unsigned int retry_count; @@ -55,8 +99,9 @@ static int pd_power_down(struct generic_pm_domain *genpd) } } - pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + if (!sh7372_pd->no_debug) + pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); return 0; } @@ -68,6 +113,9 @@ static int pd_power_up(struct generic_pm_domain *genpd) unsigned int retry_count; int ret = 0; + if (sh7372_pd->stay_on) + goto out; + if (__raw_readl(PSTR) & mask) goto out; @@ -84,66 +132,48 @@ static int pd_power_up(struct generic_pm_domain *genpd) if (__raw_readl(SWUCR) & mask) ret = -EIO; + if (!sh7372_pd->no_debug) + pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); + out: - pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + if (ret == 0 && sh7372_pd->resume) + sh7372_pd->resume(); return ret; } -static int pd_power_up_a3rv(struct generic_pm_domain *genpd) +static void sh7372_a4r_suspend(void) { - int ret = pd_power_up(genpd); - - /* force A4LC on after A3RV has been requested on */ - pm_genpd_poweron(&sh7372_a4lc.genpd); - - return ret; + sh7372_intcs_suspend(); + __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ } -static int pd_power_down_a3rv(struct generic_pm_domain *genpd) +static bool pd_active_wakeup(struct device *dev) { - int ret = pd_power_down(genpd); - - /* try to power down A4LC after A3RV is requested off */ - genpd_queue_power_off_work(&sh7372_a4lc.genpd); - - return ret; + return true; } -static int pd_power_down_a4lc(struct generic_pm_domain *genpd) +static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain) { - /* only power down A4LC if A3RV is off */ - if (!(__raw_readl(PSTR) & (1 << sh7372_a3rv.bit_shift))) - return pd_power_down(genpd); - - return -EBUSY; + return false; } -static bool pd_active_wakeup(struct device *dev) -{ - return true; -} +struct dev_power_governor sh7372_always_on_gov = { + .power_down_ok = sh7372_power_down_forbidden, +}; void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) { struct generic_pm_domain *genpd = &sh7372_pd->genpd; - pm_genpd_init(genpd, NULL, false); + pm_genpd_init(genpd, sh7372_pd->gov, false); genpd->stop_device = pm_clk_suspend; genpd->start_device = pm_clk_resume; + genpd->dev_irq_safe = true; genpd->active_wakeup = pd_active_wakeup; - - if (sh7372_pd == &sh7372_a4lc) { - genpd->power_off = pd_power_down_a4lc; - genpd->power_on = pd_power_up; - } else if (sh7372_pd == &sh7372_a3rv) { - genpd->power_off = pd_power_down_a3rv; - genpd->power_on = pd_power_up_a3rv; - } else { - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - } + genpd->power_off = pd_power_down; + genpd->power_on = pd_power_up; genpd->power_on(&sh7372_pd->genpd); } @@ -152,11 +182,15 @@ void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, { struct device *dev = &pdev->dev; - if (!dev->power.subsys_data) { - pm_clk_init(dev); - pm_clk_add(dev, NULL); - } pm_genpd_add_device(&sh7372_pd->genpd, dev); + if (pm_clk_no_clocks(dev)) + pm_clk_add(dev, NULL); +} + +void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, + struct sh7372_pm_domain *sh7372_sd) +{ + pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd); } struct sh7372_pm_domain sh7372_a4lc = { @@ -171,6 +205,14 @@ struct sh7372_pm_domain sh7372_d4 = { .bit_shift = 3, }; +struct sh7372_pm_domain sh7372_a4r = { + .bit_shift = 5, + .gov = &sh7372_always_on_gov, + .suspend = sh7372_a4r_suspend, + .resume = sh7372_intcs_resume, + .stay_on = true, +}; + struct sh7372_pm_domain sh7372_a3rv = { .bit_shift = 6, }; @@ -179,39 +221,187 @@ struct sh7372_pm_domain sh7372_a3ri = { .bit_shift = 8, }; +struct sh7372_pm_domain sh7372_a3sp = { + .bit_shift = 11, + .gov = &sh7372_always_on_gov, + .no_debug = true, +}; + struct sh7372_pm_domain sh7372_a3sg = { .bit_shift = 13, }; #endif /* CONFIG_PM */ +#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) +static int sh7372_do_idle_core_standby(unsigned long unused) +{ + cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ + return 0; +} + static void sh7372_enter_core_standby(void) { - void __iomem *smfram = (void __iomem *)SMFRAM; + /* set reset vector, translate 4k */ + __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); + __raw_writel(0, APARMBAREA); - __raw_writel(0, APARMBAREA); /* translate 4k */ - __raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */ - __raw_writel(0x10, SYSTBCR); /* enable core standby */ + /* enter sleep mode with SYSTBCR to 0x10 */ + __raw_writel(0x10, SYSTBCR); + cpu_suspend(0, sh7372_do_idle_core_standby); + __raw_writel(0, SYSTBCR); - __raw_writel(0, smfram + 0x3c); /* clear page table address */ + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} +#endif + +#ifdef CONFIG_SUSPEND +static void sh7372_enter_a3sm_common(int pllc0_on) +{ + /* set reset vector, translate 4k */ + __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); + __raw_writel(0, APARMBAREA); + + if (pllc0_on) + __raw_writel(0, PLLC01STPCR); + else + __raw_writel(1 << 28, PLLC01STPCR); + + __raw_writel(0, PDNSEL); /* power-down A3SM only, not A4S */ + __raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */ + cpu_suspend(0, sh7372_do_idle_a3sm); + __raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */ + + /* disable reset vector translation */ + __raw_writel(0, SBAR); +} + +static int sh7372_a3sm_valid(unsigned long *mskp, unsigned long *msk2p) +{ + unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4; + unsigned long msk, msk2; + + /* check active clocks to determine potential wakeup sources */ + + mstpsr0 = __raw_readl(MSTPSR0); + if ((mstpsr0 & 0x00000003) != 0x00000003) { + pr_debug("sh7372 mstpsr0 0x%08lx\n", mstpsr0); + return 0; + } + + mstpsr1 = __raw_readl(MSTPSR1); + if ((mstpsr1 & 0xff079b7f) != 0xff079b7f) { + pr_debug("sh7372 mstpsr1 0x%08lx\n", mstpsr1); + return 0; + } - sh7372_cpu_suspend(); - cpu_init(); + mstpsr2 = __raw_readl(MSTPSR2); + if ((mstpsr2 & 0x000741ff) != 0x000741ff) { + pr_debug("sh7372 mstpsr2 0x%08lx\n", mstpsr2); + return 0; + } - /* if page table address is non-NULL then we have been powered down */ - if (__raw_readl(smfram + 0x3c)) { - __raw_writel(__raw_readl(smfram + 0x40), - __va(__raw_readl(smfram + 0x3c))); + mstpsr3 = __raw_readl(MSTPSR3); + if ((mstpsr3 & 0x1a60f010) != 0x1a60f010) { + pr_debug("sh7372 mstpsr3 0x%08lx\n", mstpsr3); + return 0; + } - flush_tlb_all(); - set_cr(__raw_readl(smfram + 0x38)); + mstpsr4 = __raw_readl(MSTPSR4); + if ((mstpsr4 & 0x00008cf0) != 0x00008cf0) { + pr_debug("sh7372 mstpsr4 0x%08lx\n", mstpsr4); + return 0; } - __raw_writel(0, SYSTBCR); /* disable core standby */ - __raw_writel(0, SBAR); /* disable reset vector translation */ + msk = 0; + msk2 = 0; + + /* make bitmaps of limited number of wakeup sources */ + + if ((mstpsr2 & (1 << 23)) == 0) /* SPU2 */ + msk |= 1 << 31; + + if ((mstpsr2 & (1 << 12)) == 0) /* MFI_MFIM */ + msk |= 1 << 21; + + if ((mstpsr4 & (1 << 3)) == 0) /* KEYSC */ + msk |= 1 << 2; + + if ((mstpsr1 & (1 << 24)) == 0) /* CMT0 */ + msk |= 1 << 1; + + if ((mstpsr3 & (1 << 29)) == 0) /* CMT1 */ + msk |= 1 << 1; + + if ((mstpsr4 & (1 << 0)) == 0) /* CMT2 */ + msk |= 1 << 1; + + if ((mstpsr2 & (1 << 13)) == 0) /* MFI_MFIS */ + msk2 |= 1 << 17; + + *mskp = msk; + *msk2p = msk2; + + return 1; +} + +static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p) +{ + u16 tmp, irqcr1, irqcr2; + int k; + + irqcr1 = 0; + irqcr2 = 0; + + /* convert INTCA ICR register layout to SYSC IRQCR+IRQCR2 */ + for (k = 0; k <= 7; k++) { + tmp = (icr >> ((7 - k) * 4)) & 0xf; + irqcr1 |= (tmp & 0x03) << (k * 2); + irqcr2 |= (tmp >> 2) << (k * 2); + } + + *irqcr1p = irqcr1; + *irqcr2p = irqcr2; +} + +static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2) +{ + u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high; + unsigned long tmp; + + /* read IRQ0A -> IRQ15A mask */ + tmp = bitrev8(__raw_readb(INTMSK00A)); + tmp |= bitrev8(__raw_readb(INTMSK10A)) << 8; + + /* setup WUPSMSK from clocks and external IRQ mask */ + msk = (~msk & 0xc030000f) | (tmp << 4); + __raw_writel(msk, WUPSMSK); + + /* propage level/edge trigger for external IRQ 0->15 */ + sh7372_icr_to_irqcr(__raw_readl(ICR1A), &irqcrx_low, &irqcry_low); + sh7372_icr_to_irqcr(__raw_readl(ICR2A), &irqcrx_high, &irqcry_high); + __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR); + __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR2); + + /* read IRQ16A -> IRQ31A mask */ + tmp = bitrev8(__raw_readb(INTMSK20A)); + tmp |= bitrev8(__raw_readb(INTMSK30A)) << 8; + + /* setup WUPSMSK2 from clocks and external IRQ mask */ + msk2 = (~msk2 & 0x00030000) | tmp; + __raw_writel(msk2, WUPSMSK2); + + /* propage level/edge trigger for external IRQ 16->31 */ + sh7372_icr_to_irqcr(__raw_readl(ICR3A), &irqcrx_low, &irqcry_low); + sh7372_icr_to_irqcr(__raw_readl(ICR4A), &irqcrx_high, &irqcry_high); + __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3); + __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4); } +#endif #ifdef CONFIG_CPU_IDLE + static void sh7372_cpuidle_setup(struct cpuidle_device *dev) { struct cpuidle_state *state; @@ -239,9 +429,25 @@ static void sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND + static int sh7372_enter_suspend(suspend_state_t suspend_state) { - sh7372_enter_core_standby(); + unsigned long msk, msk2; + + /* check active clocks to determine potential wakeup sources */ + if (sh7372_a3sm_valid(&msk, &msk2)) { + + /* convert INTC mask and sense to SYSC mask and sense */ + sh7372_setup_a3sm(msk, msk2); + + /* enter A3SM sleep with PLLC0 off */ + pr_debug("entering A3SM\n"); + sh7372_enter_a3sm_common(0); + } else { + /* default to Core Standby that supports all wakeup sources */ + pr_debug("entering Core Standby\n"); + sh7372_enter_core_standby(); + } return 0; } @@ -253,9 +459,6 @@ static void sh7372_suspend_init(void) static void sh7372_suspend_init(void) {} #endif -#define DBGREG1 0xe6100020 -#define DBGREG9 0xe6100040 - void __init sh7372_pm_init(void) { /* enable DBG hardware block to kick SYSC */ @@ -263,6 +466,9 @@ void __init sh7372_pm_init(void) __raw_writel(0x0000a501, DBGREG9); __raw_writel(0x00000000, DBGREG1); + /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ + __raw_writel(0, PDNSEL); + sh7372_suspend_init(); sh7372_cpuidle_init(); } diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c index 6ec454e1e06..bd5c6a3b8c5 100644 --- a/arch/arm/mach-shmobile/pm_runtime.c +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/pm_runtime.h> #include <linux/pm_domain.h> +#include <linux/pm_clock.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/sh_clk.h> diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 2d9b1b1a253..2380389e6ac 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -30,6 +30,7 @@ #include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <linux/pm_domain.h> #include <mach/hardware.h> #include <mach/sh7372.h> #include <asm/mach-types.h> @@ -990,9 +991,14 @@ void __init sh7372_add_standard_devices(void) sh7372_init_pm_domain(&sh7372_a4lc); sh7372_init_pm_domain(&sh7372_a4mp); sh7372_init_pm_domain(&sh7372_d4); + sh7372_init_pm_domain(&sh7372_a4r); sh7372_init_pm_domain(&sh7372_a3rv); sh7372_init_pm_domain(&sh7372_a3ri); sh7372_init_pm_domain(&sh7372_a3sg); + sh7372_init_pm_domain(&sh7372_a3sp); + + sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv); + sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc); platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); @@ -1003,6 +1009,25 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device); sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device); sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); + sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); + sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); } void __init sh7372_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index d37d3ca4d18..f3ab3c5810e 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -30,58 +30,20 @@ */ #include <linux/linkage.h> +#include <linux/init.h> +#include <asm/memory.h> #include <asm/assembler.h> -#define SMFRAM 0xe6a70000 - - .align -kernel_flush: - .word v7_flush_dcache_all - - .align 3 -ENTRY(sh7372_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack - - ldr r8, =SMFRAM - - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - - /* - * jump out to kernel flush routine - * - reuse that code is better - * - it executes in a cached space so is faster than refetch per-block - * - should be faster and will change with kernel - * - 'might' have to copy address, load and jump to it - * Flush all data from the L1 data cache before disabling - * SCTLR.C bit. - */ - ldr r1, kernel_flush - mov lr, pc - bx r1 +#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) + .align 12 + .text + .global sh7372_resume_core_standby_a3sm +sh7372_resume_core_standby_a3sm: + ldr pc, 1f +1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET + .global sh7372_do_idle_a3sm +sh7372_do_idle_a3sm: /* * Clear the SCTLR.C bit to prevent further data cache * allocation. Clearing SCTLR.C would make all the data accesses @@ -92,10 +54,13 @@ ENTRY(sh7372_cpu_suspend) mcr p15, 0, r0, c1, c0, 0 isb + /* disable L2 cache in the aux control register */ + mrc p15, 0, r10, c1, c0, 1 + bic r10, r10, #2 + mcr p15, 0, r10, c1, c0, 1 + /* - * Invalidate L1 data cache. Even though only invalidate is - * necessary exported flush API is used here. Doing clean - * on already clean cache would be almost NOP. + * Invalidate data cache again. */ ldr r1, kernel_flush blx r1 @@ -115,146 +80,16 @@ ENTRY(sh7372_cpu_suspend) dsb dmb -/* - * =================================== - * == WFI instruction => Enter idle == - * =================================== - */ - wfi @ wait for interrupt - -/* - * =================================== - * == Resume path for non-OFF modes == - * =================================== - */ - mrc p15, 0, r0, c1, c0, 0 - tst r0, #(1 << 2) @ Check C bit enabled? - orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared - mcreq p15, 0, r0, c1, c0, 0 - isb - -/* - * =================================== - * == Exit point from non-OFF modes == - * =================================== - */ - ldmfd sp!, {r0-r12, pc} @ restore regs and return +#define SPDCR 0xe6180008 +#define A3SM (1 << 12) - .pool + /* A3SM power down */ + ldr r0, =SPDCR + ldr r1, =A3SM + str r1, [r0] +1: + b 1b - .align 12 - .text - .global sh7372_cpu_resume -sh7372_cpu_resume: - - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - - ldr r3, =SMFRAM - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Starting to enable MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error - - .align -cache_pred_disable_mask: - .word 0xFFFFE7FB -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -usettbr0: - - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r6, table_entry - /* r6 has the value to be written to table entry */ - add r6, r6, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - ldr r4, [r2] - str r6, [r2] /* modify the table entry */ - - mov r7, r6 - mov r5, r2 - mov r6, r4 - /* r5 = original page table address */ - /* r6 = original page table data */ - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - stmia r3!, {r5} /* save original page table address */ - stmia r3!, {r6} /* save original page table data */ - stmia r3!, {r7} /* save modified page table data */ - - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - - ldr r0, =restoremmu_on - bx r0 - -/* - * ============================== - * == Exit point from OFF mode == - * ============================== - */ -restoremmu_on: - - ldmfd sp!, {r0-r12, pc} @ restore regs and return +kernel_flush: + .word v7_flush_dcache_all +#endif diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 3ffdbc92ba8..be1ade76ccc 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -74,6 +74,8 @@ void __cpuinit sh73a0_secondary_init(unsigned int cpu) int __cpuinit sh73a0_boot_secondary(unsigned int cpu) { + cpu = cpu_logical_map(cpu); + /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); @@ -87,6 +89,8 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) void __init sh73a0_smp_prepare_cpus(void) { + int cpu = cpu_logical_map(0); + scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ @@ -94,5 +98,5 @@ void __init sh73a0_smp_prepare_cpus(void) __raw_writel(__pa(shmobile_secondary_vector), __io(SBAR)); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (0 * 8)); + modify_scu_cpu_psr(0, 3 << (cpu * 8)); } diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 7a1f3c0eadb..4674a4c221d 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index 7a1f3c0eadb..4674a4c221d 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot index f135c9deae1..5e02d4156b0 100644 --- a/arch/arm/mach-tcc8k/Makefile.boot +++ b/arch/arm/mach-tcc8k/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x20008000 + zreladdr-y += 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20800000 diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d82ebab50e1..91aff7cb828 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -69,6 +69,12 @@ config MACH_WARIO help Support for the Wario version of Seaboard +config MACH_VENTANA + bool "Ventana board" + select MACH_TEGRA_DT + help + Support for the nVidia Ventana development platform + choice prompt "Low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f11b9100114..91a07e18720 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -31,6 +31,7 @@ obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o +obj-${CONFIG_MACH_TEGRA_DT} += board-seaboard-pinmux.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 428ad122be0..bd12c9fb81e 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,6 +1,7 @@ -zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 +zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb +dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c index 9f47e04446f..d368f8dafcf 100644 --- a/arch/arm/mach-tegra/board-dt.c +++ b/arch/arm/mach-tegra/board-dt.c @@ -47,7 +47,7 @@ void harmony_pinmux_init(void); void seaboard_pinmux_init(void); - +void ventana_pinmux_init(void); struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), @@ -80,9 +80,19 @@ static struct of_device_id tegra_dt_gic_match[] __initdata = { {} }; +static struct { + char *machine; + void (*init)(void); +} pinmux_configs[] = { + { "nvidia,harmony", harmony_pinmux_init }, + { "nvidia,seaboard", seaboard_pinmux_init }, + { "nvidia,ventana", ventana_pinmux_init }, +}; + static void __init tegra_dt_init(void) { struct device_node *node; + int i; node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match, TEGRA_ARM_INT_DIST_BASE); @@ -91,10 +101,15 @@ static void __init tegra_dt_init(void) tegra_clk_init_from_table(tegra_dt_clk_init_table); - if (of_machine_is_compatible("nvidia,harmony")) - harmony_pinmux_init(); - else if (of_machine_is_compatible("nvidia,seaboard")) - seaboard_pinmux_init(); + for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) { + if (of_machine_is_compatible(pinmux_configs[i].machine)) { + pinmux_configs[i].init(); + break; + } + } + + WARN(i == ARRAY_SIZE(pinmux_configs), + "Unknown platform! Pinmuxing not initialized\n"); /* * Finished with the static registrations now; fill in the missing @@ -106,6 +121,7 @@ static void __init tegra_dt_init(void) static const char * tegra_dt_board_compat[] = { "nvidia,harmony", "nvidia,seaboard", + "nvidia,ventana", NULL }; diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 9c27b95b8d8..6db7d699ef1 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -24,12 +24,10 @@ #include <mach/pinmux.h> #include "board.h" +#include "board-harmony.h" #ifdef CONFIG_TEGRA_PCI -/* GPIO 3 of the PMIC */ -#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2) - static int __init harmony_pcie_init(void) { struct regulator *regulator = NULL; @@ -38,11 +36,11 @@ static int __init harmony_pcie_init(void) if (!machine_is_harmony()) return 0; - err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05"); + err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05"); if (err) return err; - gpio_direction_output(EN_VDD_1V05_GPIO, 1); + gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1); regulator = regulator_get(NULL, "pex_clk"); if (IS_ERR_OR_NULL(regulator)) @@ -68,7 +66,7 @@ err_pcie: regulator_disable(regulator); regulator_put(regulator); err_reg: - gpio_free(EN_VDD_1V05_GPIO); + gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO); return err; } diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index 4d63e2e97a8..e99b45618cd 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -20,6 +20,7 @@ #include "gpio-names.h" #include "board-harmony.h" +#include "devices.h" static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static struct platform_device *pinmux_devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; + static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, @@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = { void harmony_pinmux_init(void) { + platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux)); tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 5ad8b2f94f8..21d1285731b 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -18,10 +18,11 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/gpio.h> - +#include <linux/io.h> #include <linux/regulator/machine.h> #include <linux/mfd/tps6586x.h> +#include <mach/iomap.h> #include <mach/irqs.h> #include "board-harmony.h" @@ -113,6 +114,16 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); + u32 pmc_ctrl; + + /* + * Configure the power management controller to trigger PMU + * interrupts when low + */ + pmc_ctrl = readl(pmc + PMC_CTRL); + writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL); + i2c_register_board_info(3, harmony_regulators, 1); return 0; diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index a4d1980e697..f0bdc5e3fe5 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -49,7 +49,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .membase = IO_ADDRESS(TEGRA_UARTD_BASE), .mapbase = TEGRA_UARTD_BASE, .irq = INT_UARTD, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -117,14 +118,15 @@ static struct platform_device *harmony_devices[] __initdata = { &tegra_sdhci_device1, &tegra_sdhci_device2, &tegra_sdhci_device4, + &tegra_ehci3_device, &tegra_i2s_device1, &tegra_das_device, &tegra_pcm_device, &harmony_audio_device, }; -static void __init tegra_harmony_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; @@ -140,6 +142,7 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, { "i2s1", "pll_a_out0", 11289600, false}, + { "usb3", "clk_m", 12000000, true }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h index d85142edaf6..139d96c9384 100644 --- a/arch/arm/mach-tegra/board-harmony.h +++ b/arch/arm/mach-tegra/board-harmony.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_HARMONY_H #define _MACH_TEGRA_BOARD_HARMONY_H +#include <mach/gpio-tegra.h> + #define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) #define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_)) @@ -31,6 +33,7 @@ #define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2 #define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0 #define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1 +#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2) void harmony_pinmux_init(void); int harmony_regulator_init(void); diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index bdd2627dd87..fb20894862b 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -20,6 +20,7 @@ #include "gpio-names.h" #include "board-paz00.h" +#include "devices.h" static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -140,15 +141,25 @@ static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static struct platform_device *pinmux_devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; + static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, { .gpio = TEGRA_ULPI_RST, .enable = true }, + { .gpio = TEGRA_WIFI_PWRN, .enable = true }, + { .gpio = TEGRA_WIFI_RST, .enable = true }, + { .gpio = TEGRA_WIFI_LED, .enable = true }, }; void paz00_pinmux_init(void) { + platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux)); tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 3197c4cbaa7..55c55ba89f1 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -26,6 +26,8 @@ #include <linux/pda_power.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/rfkill-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,7 +37,6 @@ #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> -#include <mach/gpio.h> #include "board.h" #include "board-paz00.h" @@ -45,10 +46,22 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { { + /* serial port on JP1 */ + .membase = IO_ADDRESS(TEGRA_UARTA_BASE), + .mapbase = TEGRA_UARTA_BASE, + .irq = INT_UARTA, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 216000000, + }, { + /* serial port on mini-pcie */ .membase = IO_ADDRESS(TEGRA_UARTD_BASE), .mapbase = TEGRA_UARTD_BASE, .irq = INT_UARTD, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -65,10 +78,48 @@ static struct platform_device debug_uart = { }, }; +static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { + .name = "wifi_rfkill", + .reset_gpio = TEGRA_WIFI_RST, + .shutdown_gpio = TEGRA_WIFI_PWRN, + .type = RFKILL_TYPE_WLAN, +}; + +static struct platform_device wifi_rfkill_device = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &wifi_rfkill_platform_data, + }, +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "wifi-led", + .default_trigger = "rfkill0", + .gpio = TEGRA_WIFI_LED, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + static struct platform_device *paz00_devices[] __initdata = { &debug_uart, - &tegra_sdhci_device1, &tegra_sdhci_device4, + &tegra_sdhci_device1, + &wifi_rfkill_device, + &leds_gpio, }; static void paz00_i2c_init(void) @@ -84,8 +135,8 @@ static void paz00_usb_init(void) platform_device_register(&tegra_ehci3_device); } -static void __init tegra_paz00_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; @@ -94,7 +145,14 @@ static void __init tegra_paz00_fixup(struct machine_desc *desc, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ + { "uarta", "pll_p", 216000000, true }, { "uartd", "pll_p", 216000000, true }, + + { "pll_p_out4", "pll_p", 24000000, true }, + { "usbd", "clk_m", 12000000, false }, + { "usb2", "clk_m", 12000000, false }, + { "usb3", "clk_m", 12000000, false }, + { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index d4ff39ddaeb..8aff06eb58c 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,11 +17,21 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H +#include <mach/gpio-tegra.h> + +/* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 + +/* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 +/* WIFI */ +#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5 +#define TEGRA_WIFI_RST TEGRA_GPIO_PD1 +#define TEGRA_WIFI_LED TEGRA_GPIO_PD0 + void paz00_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index 0bda495e974..fbce31daa3c 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2010 NVIDIA Corporation + * Copyright (C) 2010,2011 NVIDIA Corporation + * Copyright (C) 2011 Google, Inc. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -21,6 +22,7 @@ #include "gpio-names.h" #include "board-seaboard.h" +#include "devices.h" #define DEFAULT_DRIVE(_name) \ { \ @@ -49,7 +51,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -133,7 +135,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -157,24 +159,83 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static __initdata struct tegra_pingroup_config ventana_pinmux[] = { + {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, +}; +static struct platform_device *pinmux_devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; - -static struct tegra_gpio_table gpio_table[] = { +static struct tegra_gpio_table common_gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, + { .gpio = TEGRA_GPIO_USB1, .enable = true }, }; -void __init seaboard_pinmux_init(void) +static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size) +{ + int i, j; + struct tegra_pingroup_config *new_pingroup, *base_pingroup; + + /* Update base seaboard pinmux table with secondary board + * specific pinmux table table. + */ + for (i = 0; i < size; i++) { + new_pingroup = &newtbl[i]; + for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) { + base_pingroup = &seaboard_pinmux[j]; + if (new_pingroup->pingroup == base_pingroup->pingroup) { + *base_pingroup = *new_pingroup; + break; + } + } + } +} + +void __init seaboard_common_pinmux_init(void) { + platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); tegra_drive_pinmux_config_table(seaboard_drive_pinmux, ARRAY_SIZE(seaboard_drive_pinmux)); - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table)); +} + +void __init seaboard_pinmux_init(void) +{ + seaboard_common_pinmux_init(); } + +void __init ventana_pinmux_init(void) +{ + update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux)); + seaboard_common_pinmux_init(); +} + diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 9e98ac706f4..bf13ea355ef 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -25,9 +25,12 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <sound/wm8903.h> + #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> +#include <mach/tegra_wm8903_pdata.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,7 +44,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { { /* Memory and IRQ filled in before registration */ - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -62,6 +66,12 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { /* name parent rate enabled */ { "uartb", "pll_p", 216000000, true}, { "uartd", "pll_p", 216000000, true}, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, + { "usbd", "clk_m", 12000000, true}, + { "usb3", "clk_m", 12000000, true}, { NULL, NULL, 0, 0}, }; @@ -117,6 +127,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .is_8bit = 1, }; +static struct tegra_wm8903_platform_data seaboard_audio_pdata = { + .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, + .gpio_hp_det = TEGRA_GPIO_HP_DET, + .gpio_hp_mute = -1, + .gpio_int_mic_en = -1, + .gpio_ext_mic_en = -1, +}; + +static struct platform_device seaboard_audio_device = { + .name = "tegra-snd-wm8903", + .id = 0, + .dev = { + .platform_data = &seaboard_audio_pdata, + }, +}; + static struct platform_device *seaboard_devices[] __initdata = { &debug_uart, &tegra_pmu_device, @@ -124,6 +150,10 @@ static struct platform_device *seaboard_devices[] __initdata = { &tegra_sdhci_device3, &tegra_sdhci_device1, &seaboard_gpio_keys_device, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &seaboard_audio_device, }; static struct i2c_board_info __initdata isl29018_device = { @@ -135,12 +165,56 @@ static struct i2c_board_info __initdata adt7461_device = { I2C_BOARD_INFO("adt7461", 0x4c), }; +static struct wm8903_platform_data wm8903_pdata = { + .irq_active_low = 0, + .micdet_cfg = 0, + .micdet_delay = 100, + .gpio_base = SEABOARD_GPIO_WM8903(0), + .gpio_cfg = { + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + 0, + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + }, +}; + +static struct i2c_board_info __initdata wm8903_device = { + I2C_BOARD_INFO("wm8903", 0x1a), + .platform_data = &wm8903_pdata, + .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), +}; + +static int seaboard_ehci_init(void) +{ + int gpio_status; + + gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1"); + if (gpio_status < 0) { + pr_err("VBUS_USB1 request GPIO FAILED\n"); + WARN_ON(1); + } + + gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1); + if (gpio_status < 0) { + pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n"); + WARN_ON(1); + } + gpio_set_value(TEGRA_GPIO_USB1, 1); + + platform_device_register(&tegra_ehci1_device); + platform_device_register(&tegra_ehci3_device); + + return 0; +} + static void __init seaboard_i2c_init(void) { gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018"); gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ); i2c_register_board_info(0, &isl29018_device, 1); + i2c_register_board_info(0, &wm8903_device, 1); i2c_register_board_info(3, &adt7461_device, 1); @@ -161,6 +235,8 @@ static void __init seaboard_common_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices)); + + seaboard_ehci_init(); } static void __init tegra_seaboard_init(void) @@ -182,6 +258,9 @@ static void __init tegra_kaen_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; debug_uart_platform_data[0].irq = INT_UARTB; + seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE; + tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE); + seaboard_common_init(); seaboard_i2c_init(); diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index d8415e1a843..4c45d4ca3c4 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -17,6 +17,11 @@ #ifndef _MACH_TEGRA_BOARD_SEABOARD_H #define _MACH_TEGRA_BOARD_SEABOARD_H +#include <mach/gpio-tegra.h> + +#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) +#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_)) + #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 @@ -31,10 +36,11 @@ #define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 #define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 #define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 - -#define TPS_GPIO_BASE TEGRA_NR_GPIOS - -#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2) +#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2) +#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 +#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2) +#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1 +#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5 void seaboard_pinmux_init(void); diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 47c596cdbf3..4969dd28a04 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -13,15 +13,15 @@ * GNU General Public License for more details. * */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <mach/pinmux.h> -#include <mach/gpio.h> #include "gpio-names.h" #include "board-trimslice.h" +#include "devices.h" static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -142,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static struct platform_device *pinmux_devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; + static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ @@ -152,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = { void __init trimslice_pinmux_init(void) { + platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); } diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 8489aa8f515..1a6617b7806 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -32,7 +32,6 @@ #include <mach/iomap.h> #include <mach/sdhci.h> -#include <mach/gpio.h> #include "board.h" #include "clock.h" @@ -46,7 +45,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .membase = IO_ADDRESS(TEGRA_UARTA_BASE), .mapbase = TEGRA_UARTA_BASE, .irq = INT_UARTA, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -126,8 +126,8 @@ static void trimslice_usb_init(void) platform_device_register(&tegra_ehci1_device); } -static void __init tegra_trimslice_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) +static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline, + struct meminfo *mi) { mi->nr_banks = 2; mi->bank[0].start = PHYS_OFFSET; diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index 7a7dee86b4d..50f128d8777 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -17,6 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H #define _MACH_TEGRA_BOARD_TRIMSLICE_H +#include <mach/gpio-tegra.h> + #define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ #define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index d5e3f89b05a..690b888be50 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -61,7 +61,7 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = { { NULL, NULL, 0, 0}, }; -void __init tegra_init_cache(void) +static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 0e0fd4d889b..bb5ce39b733 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -56,12 +56,12 @@ static unsigned long target_cpu_speed[NUM_CPUS]; static DEFINE_MUTEX(tegra_cpu_lock); static bool is_suspended; -int tegra_verify_speed(struct cpufreq_policy *policy) +static int tegra_verify_speed(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, freq_table); } -unsigned int tegra_getspeed(unsigned int cpu) +static unsigned int tegra_getspeed(unsigned int cpu) { unsigned long rate; @@ -129,7 +129,7 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - int idx; + unsigned int idx; unsigned int freq; int ret = 0; diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 57e35d20c24..7a2a02dbd63 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -29,7 +29,93 @@ #include <mach/iomap.h> #include <mach/dma.h> #include <mach/usb_phy.h> + #include "gpio-names.h" +#include "devices.h" + +static struct resource gpio_resource[] = { + [0] = { + .start = TEGRA_GPIO_BASE, + .end = TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_GPIO1, + .end = INT_GPIO1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = INT_GPIO2, + .end = INT_GPIO2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = INT_GPIO3, + .end = INT_GPIO3, + .flags = IORESOURCE_IRQ, + }, + [4] = { + .start = INT_GPIO4, + .end = INT_GPIO4, + .flags = IORESOURCE_IRQ, + }, + [5] = { + .start = INT_GPIO5, + .end = INT_GPIO5, + .flags = IORESOURCE_IRQ, + }, + [6] = { + .start = INT_GPIO6, + .end = INT_GPIO6, + .flags = IORESOURCE_IRQ, + }, + [7] = { + .start = INT_GPIO7, + .end = INT_GPIO7, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tegra_gpio_device = { + .name = "tegra-gpio", + .id = -1, + .resource = gpio_resource, + .num_resources = ARRAY_SIZE(gpio_resource), +}; + +static struct resource pinmux_resource[] = { + [0] = { + /* Tri-state registers */ + .start = TEGRA_APB_MISC_BASE + 0x14, + .end = TEGRA_APB_MISC_BASE + 0x20 + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* Mux registers */ + .start = TEGRA_APB_MISC_BASE + 0x80, + .end = TEGRA_APB_MISC_BASE + 0x9c + 3, + .flags = IORESOURCE_MEM, + }, + [2] = { + /* Pull-up/down registers */ + .start = TEGRA_APB_MISC_BASE + 0xa0, + .end = TEGRA_APB_MISC_BASE + 0xb0 + 3, + .flags = IORESOURCE_MEM, + }, + [3] = { + /* Pad control registers */ + .start = TEGRA_APB_MISC_BASE + 0x868, + .end = TEGRA_APB_MISC_BASE + 0x90c + 3, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tegra_pinmux_device = { + .name = "tegra-pinmux", + .id = -1, + .resource = pinmux_resource, + .num_resources = ARRAY_SIZE(pinmux_resource), +}; static struct resource i2c_resource1[] = { [0] = { diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h index 4a7dc0a097d..873ecb2f8ae 100644 --- a/arch/arm/mach-tegra/devices.h +++ b/arch/arm/mach-tegra/devices.h @@ -21,6 +21,8 @@ #include <linux/platform_device.h> +extern struct platform_device tegra_gpio_device; +extern struct platform_device tegra_pinmux_device; extern struct platform_device tegra_sdhci_device1; extern struct platform_device tegra_sdhci_device2; extern struct platform_device tegra_sdhci_device3; diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index f4ef5eb317b..c0cf967e47d 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -105,13 +105,17 @@ #define NV_DMA_MAX_TRASFER_SIZE 0x10000 -const unsigned int ahb_addr_wrap_table[8] = { +static const unsigned int ahb_addr_wrap_table[8] = { 0, 32, 64, 128, 256, 512, 1024, 2048 }; -const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64}; +static const unsigned int apb_addr_wrap_table[8] = { + 0, 1, 2, 4, 8, 16, 32, 64 +}; -const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128}; +static const unsigned int bus_width_table[5] = { + 8, 16, 32, 64, 128 +}; #define TEGRA_DMA_NAME_SIZE 16 struct tegra_dma_channel { @@ -157,7 +161,7 @@ void tegra_dma_dequeue(struct tegra_dma_channel *ch) return; } -void tegra_dma_stop(struct tegra_dma_channel *ch) +static void tegra_dma_stop(struct tegra_dma_channel *ch) { u32 csr; u32 status; @@ -174,7 +178,7 @@ void tegra_dma_stop(struct tegra_dma_channel *ch) writel(status, ch->addr + APB_DMA_CHAN_STA); } -int tegra_dma_cancel(struct tegra_dma_channel *ch) +static int tegra_dma_cancel(struct tegra_dma_channel *ch) { u32 csr; unsigned long irq_flags; diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h new file mode 100644 index 00000000000..87d37fdf508 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-tegra/include/mach/gpio.h + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling <konkers@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_GPIO_TEGRA_H +#define __MACH_TEGRA_GPIO_TEGRA_H + +#include <linux/types.h> +#include <mach/irqs.h> + +#define TEGRA_NR_GPIOS INT_GPIO_NR + +#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) + +struct tegra_gpio_table { + int gpio; /* GPIO number */ + bool enable; /* Enable for GPIO at init? */ +}; + +void tegra_gpio_config(struct tegra_gpio_table *table, int num); +void tegra_gpio_enable(int gpio); +void tegra_gpio_disable(int gpio); + +#endif diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index 196f114dc24..40a8c178f10 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -1,60 +1 @@ -/* - * arch/arm/mach-tegra/include/mach/gpio.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_GPIO_H -#define __MACH_TEGRA_GPIO_H - -#include <linux/init.h> -#include <mach/irqs.h> - -#define TEGRA_NR_GPIOS INT_GPIO_NR - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) -#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE) - -static inline int gpio_to_irq(unsigned int gpio) -{ - if (gpio < TEGRA_NR_GPIOS) - return INT_GPIO_BASE + gpio; - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR)) - return irq - INT_GPIO_BASE; - return -EINVAL; -} - -struct tegra_gpio_table { - int gpio; /* GPIO number */ - bool enable; /* Enable for GPIO at init? */ -}; - -void tegra_gpio_config(struct tegra_gpio_table *table, int num); -void tegra_gpio_enable(int gpio); -void tegra_gpio_disable(int gpio); - -#endif +/* empty */ diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h index 4cea2230c8d..35a011fbc42 100644 --- a/arch/arm/mach-tegra/include/mach/io.h +++ b/arch/arm/mach-tegra/include/mach/io.h @@ -33,20 +33,26 @@ * */ +#ifdef __ASSEMBLY__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + #define IO_IRAM_PHYS 0x40000000 -#define IO_IRAM_VIRT 0xFE400000 +#define IO_IRAM_VIRT IOMEM(0xFE400000) #define IO_IRAM_SIZE SZ_256K #define IO_CPU_PHYS 0x50040000 -#define IO_CPU_VIRT 0xFE000000 +#define IO_CPU_VIRT IOMEM(0xFE000000) #define IO_CPU_SIZE SZ_16K #define IO_PPSB_PHYS 0x60000000 -#define IO_PPSB_VIRT 0xFE200000 +#define IO_PPSB_VIRT IOMEM(0xFE200000) #define IO_PPSB_SIZE SZ_1M #define IO_APB_PHYS 0x70000000 -#define IO_APB_VIRT 0xFE300000 +#define IO_APB_VIRT IOMEM(0xFE300000) #define IO_APB_SIZE SZ_1M #define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) @@ -61,7 +67,7 @@ IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \ IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \ IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \ - 0) + NULL) #ifndef __ASSEMBLER__ @@ -71,7 +77,7 @@ void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type); void tegra_iounmap(volatile void __iomem *addr); -#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n)) +#define IO_ADDRESS(n) (IO_TO_VIRT(n)) #ifdef CONFIG_TEGRA_PCI extern void __iomem *tegra_pcie_io_base; diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h index defd8775def..bb7dfdb6120 100644 --- a/arch/arm/mach-tegra/include/mach/pinmux.h +++ b/arch/arm/mach-tegra/include/mach/pinmux.h @@ -199,6 +199,7 @@ struct tegra_drive_pingroup_config { struct tegra_drive_pingroup_desc { const char *name; + s16 reg_bank; s16 reg; }; @@ -207,6 +208,9 @@ struct tegra_pingroup_desc { int funcs[4]; int func_safe; int vddio; + s16 tri_bank; /* Register bank the tri_reg exists within */ + s16 mux_bank; /* Register bank the mux_reg exists within */ + s16 pupd_bank; /* Register bank the pupd_reg exists within */ s16 tri_reg; /* offset into the TRISTATE_REG_* register bank */ s16 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */ s16 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */ diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h index 401d1b72529..39c396d2ddb 100644 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -31,7 +31,6 @@ int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); -bool tegra_powergate_is_powered(int id); int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index ea50fe28cf6..5489f8b5d6a 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -31,25 +31,25 @@ static struct map_desc tegra_io_desc[] __initdata = { { - .virtual = IO_PPSB_VIRT, + .virtual = (unsigned long)IO_PPSB_VIRT, .pfn = __phys_to_pfn(IO_PPSB_PHYS), .length = IO_PPSB_SIZE, .type = MT_DEVICE, }, { - .virtual = IO_APB_VIRT, + .virtual = (unsigned long)IO_APB_VIRT, .pfn = __phys_to_pfn(IO_APB_PHYS), .length = IO_APB_SIZE, .type = MT_DEVICE, }, { - .virtual = IO_CPU_VIRT, + .virtual = (unsigned long)IO_CPU_VIRT, .pfn = __phys_to_pfn(IO_CPU_PHYS), .length = IO_CPU_SIZE, .type = MT_DEVICE, }, { - .virtual = IO_IRAM_VIRT, + .virtual = (unsigned long)IO_IRAM_VIRT, .pfn = __phys_to_pfn(IO_IRAM_PHYS), .length = IO_IRAM_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index f1f699d86c3..f5aa173c26b 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -41,6 +41,8 @@ #include <mach/clk.h> #include <mach/powergate.h> +#include "board.h" + /* register definitions */ #define AFI_OFFSET 0x3800 #define PADS_OFFSET 0x3000 @@ -150,9 +152,9 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); #define pmc_writel(value, reg) \ - __raw_writel(value, (u32)reg_pmc_base + (reg)) + __raw_writel(value, reg_pmc_base + (reg)) #define pmc_readl(reg) \ - __raw_readl((u32)reg_pmc_base + (reg)) + __raw_readl(reg_pmc_base + (reg)) /* * Tegra2 defines 1GB in the AXI address map for PCIe. @@ -460,7 +462,7 @@ static struct pci_bus __init *tegra_pcie_scan_bus(int nr, struct tegra_pcie_port *pp; if (nr >= tegra_pcie.num_ports) - return 0; + return NULL; pp = tegra_pcie.port + nr; pp->root_bus_nr = sys->busnr; diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c index a475367befa..a0dc2bc28ed 100644 --- a/arch/arm/mach-tegra/pinmux-t2-tables.c +++ b/arch/arm/mach-tegra/pinmux-t2-tables.c @@ -31,10 +31,16 @@ #include <mach/pinmux.h> #include <mach/suspend.h> +#define TRISTATE_REG_A 0x14 +#define PIN_MUX_CTL_REG_A 0x80 +#define PULLUPDOWN_REG_A 0xa0 +#define PINGROUP_REG_A 0x868 + #define DRIVE_PINGROUP(pg_name, r) \ [TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \ .name = #pg_name, \ - .reg = r \ + .reg_bank = 3, \ + .reg = ((r) - PINGROUP_REG_A) \ } const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = { @@ -90,11 +96,14 @@ const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE TEGRA_MUX_ ## f3, \ }, \ .func_safe = TEGRA_MUX_ ## f_safe, \ - .tri_reg = tri_r, \ + .tri_bank = 0, \ + .tri_reg = ((tri_r) - TRISTATE_REG_A), \ .tri_bit = tri_b, \ - .mux_reg = mux_r, \ + .mux_bank = 1, \ + .mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A), \ .mux_bit = mux_b, \ - .pupd_reg = pupd_r, \ + .pupd_bank = 2, \ + .pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A), \ .pupd_bit = pupd_b, \ } @@ -217,62 +226,3 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { PINGROUP(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 30), PINGROUP(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 28), }; - -#ifdef CONFIG_PM -#define TRISTATE_REG_A 0x14 -#define TRISTATE_REG_NUM 4 -#define PIN_MUX_CTL_REG_A 0x80 -#define PIN_MUX_CTL_REG_NUM 8 -#define PULLUPDOWN_REG_A 0xa0 -#define PULLUPDOWN_REG_NUM 5 - -static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM + - PULLUPDOWN_REG_NUM + - ARRAY_SIZE(tegra_soc_drive_pingroups)]; - -static inline unsigned long pg_readl(unsigned long offset) -{ - return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); -} - -static inline void pg_writel(unsigned long value, unsigned long offset) -{ - writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); -} - -void tegra_pinmux_suspend(void) -{ - unsigned int i; - u32 *ctx = pinmux_reg; - - for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++) - *ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4); - - for (i = 0; i < PULLUPDOWN_REG_NUM; i++) - *ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4); - - for (i = 0; i < TRISTATE_REG_NUM; i++) - *ctx++ = pg_readl(TRISTATE_REG_A + i*4); - - for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++) - *ctx++ = pg_readl(tegra_soc_drive_pingroups[i].reg); -} - -void tegra_pinmux_resume(void) -{ - unsigned int i; - u32 *ctx = pinmux_reg; - - for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++) - pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4); - - for (i = 0; i < PULLUPDOWN_REG_NUM; i++) - pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4); - - for (i = 0; i < TRISTATE_REG_NUM; i++) - pg_writel(*ctx++, TRISTATE_REG_A + i*4); - - for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++) - pg_writel(*ctx++, tegra_soc_drive_pingroups[i].reg); -} -#endif diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c index f80d507671b..1d201650d7a 100644 --- a/arch/arm/mach-tegra/pinmux.c +++ b/arch/arm/mach-tegra/pinmux.c @@ -20,6 +20,7 @@ #include <linux/errno.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <mach/iomap.h> #include <mach/pinmux.h> @@ -169,15 +170,17 @@ static const char *pupd_name(unsigned long val) } } +static int nbanks; +static void __iomem **regs; -static inline unsigned long pg_readl(unsigned long offset) +static inline u32 pg_readl(u32 bank, u32 reg) { - return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); + return readl(regs[bank] + reg); } -static inline void pg_writel(unsigned long value, unsigned long offset) +static inline void pg_writel(u32 val, u32 bank, u32 reg) { - writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); + writel(val, regs[bank] + reg); } static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config) @@ -217,10 +220,10 @@ static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config) spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(pingroups[pg].mux_reg); + reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg); reg &= ~(0x3 << pingroups[pg].mux_bit); reg |= mux << pingroups[pg].mux_bit; - pg_writel(reg, pingroups[pg].mux_reg); + pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -241,11 +244,11 @@ int tegra_pinmux_set_tristate(enum tegra_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(pingroups[pg].tri_reg); + reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg); reg &= ~(0x1 << pingroups[pg].tri_bit); if (tristate) reg |= 1 << pingroups[pg].tri_bit; - pg_writel(reg, pingroups[pg].tri_reg); + pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -272,10 +275,10 @@ int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(pingroups[pg].pupd_reg); + reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg); reg &= ~(0x3 << pingroups[pg].pupd_bit); reg |= pupd << pingroups[pg].pupd_bit; - pg_writel(reg, pingroups[pg].pupd_reg); + pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -362,12 +365,12 @@ static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); if (hsm == TEGRA_HSM_ENABLE) reg |= (1 << 2); else reg &= ~(1 << 2); - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -387,12 +390,12 @@ static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); if (schmitt == TEGRA_SCHMITT_ENABLE) reg |= (1 << 3); else reg &= ~(1 << 3); - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -412,10 +415,10 @@ static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); reg &= ~(0x3 << 4); reg |= drive << 4; - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -435,10 +438,10 @@ static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); reg &= ~(0x1f << 12); reg |= pull_down << 12; - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -458,10 +461,10 @@ static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); reg &= ~(0x1f << 12); reg |= pull_up << 12; - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -481,10 +484,10 @@ static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); reg &= ~(0x3 << 28); reg |= slew_rising << 28; - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -504,10 +507,10 @@ static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(drive_pingroups[pg].reg); + reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); reg &= ~(0x3 << 30); reg |= slew_falling << 30; - pg_writel(reg, drive_pingroups[pg].reg); + pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -665,6 +668,99 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co } } +static int __devinit tegra_pinmux_probe(struct platform_device *pdev) +{ + struct resource *res; + int i; + int config_bad = 0; + + for (i = 0; ; i++) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) + break; + } + nbanks = i; + + for (i = 0; i < TEGRA_MAX_PINGROUP; i++) { + if (pingroups[i].tri_bank >= nbanks) { + dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i); + config_bad = 1; + } + + if (pingroups[i].mux_bank >= nbanks) { + dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i); + config_bad = 1; + } + + if (pingroups[i].pupd_bank >= nbanks) { + dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i); + config_bad = 1; + } + } + + for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) { + if (drive_pingroups[i].reg_bank >= nbanks) { + dev_err(&pdev->dev, + "drive pingroup %d: bad reg_bank\n", i); + config_bad = 1; + } + } + + if (config_bad) + return -ENODEV; + + regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL); + if (!regs) { + dev_err(&pdev->dev, "Can't alloc regs pointer\n"); + return -ENODEV; + } + + for (i = 0; i < nbanks; i++) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) { + dev_err(&pdev->dev, "Missing MEM resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, + "Couldn't request MEM resource %d\n", i); + return -ENODEV; + } + + regs[i] = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!regs) { + dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i); + return -ENODEV; + } + } + + return 0; +} + +static struct of_device_id tegra_pinmux_of_match[] __devinitdata = { + { .compatible = "nvidia,tegra20-pinmux", }, + { }, +}; + +static struct platform_driver tegra_pinmux_driver = { + .driver = { + .name = "tegra-pinmux", + .owner = THIS_MODULE, + .of_match_table = tegra_pinmux_of_match, + }, + .probe = tegra_pinmux_probe, +}; + +static int __init tegra_pinmux_init(void) +{ + return platform_driver_register(&tegra_pinmux_driver); +} +postcore_initcall(tegra_pinmux_init); + #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> @@ -684,6 +780,7 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) int len; for (i = 0; i < TEGRA_MAX_PINGROUP; i++) { + unsigned long reg; unsigned long tri; unsigned long mux; unsigned long pupd; @@ -696,8 +793,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) seq_printf(s, "TEGRA_MUX_NONE"); len = strlen("NONE"); } else { - mux = (pg_readl(pingroups[i].mux_reg) >> - pingroups[i].mux_bit) & 0x3; + reg = pg_readl(pingroups[i].mux_bank, + pingroups[i].mux_reg); + mux = (reg >> pingroups[i].mux_bit) & 0x3; if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) { seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1); len = 5; @@ -713,8 +811,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) seq_printf(s, "TEGRA_PUPD_NORMAL"); len = strlen("NORMAL"); } else { - pupd = (pg_readl(pingroups[i].pupd_reg) >> - pingroups[i].pupd_bit) & 0x3; + reg = pg_readl(pingroups[i].pupd_bank, + pingroups[i].pupd_reg); + pupd = (reg >> pingroups[i].pupd_bit) & 0x3; seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd)); len = strlen(pupd_name(pupd)); } @@ -723,8 +822,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) if (pingroups[i].tri_reg < 0) { seq_printf(s, "TEGRA_TRI_NORMAL"); } else { - tri = (pg_readl(pingroups[i].tri_reg) >> - pingroups[i].tri_bit) & 0x1; + reg = pg_readl(pingroups[i].tri_bank, + pingroups[i].tri_reg); + tri = (reg >> pingroups[i].tri_bit) & 0x1; seq_printf(s, "TEGRA_TRI_%s", tri_name(tri)); } @@ -759,7 +859,8 @@ static int dbg_drive_pinmux_show(struct seq_file *s, void *unused) dbg_pad_field(s, 7 - len); - reg = pg_readl(drive_pingroups[i].reg); + reg = pg_readl(drive_pingroups[i].reg_bank, + drive_pingroups[i].reg); if (HSM_EN(reg)) { seq_printf(s, "TEGRA_HSM_ENABLE"); len = 16; diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 3cee9aa1f2c..948306491a5 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -89,12 +89,11 @@ int tegra_powergate_power_off(int id) return tegra_powergate_set(id, false); } -bool tegra_powergate_is_powered(int id) +static bool tegra_powergate_is_powered(int id) { u32 status; - if (id < 0 || id >= TEGRA_NUM_POWERGATE) - return -EINVAL; + WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE); status = pmc_read(PWRGATE_STATUS) & (1 << id); return !!status; diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 0fe9b3ee294..371869d8ea0 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -166,13 +166,13 @@ static DEFINE_SPINLOCK(clock_register_lock); static int tegra_periph_clk_enable_refcount[3 * 32]; #define clk_writel(value, reg) \ - __raw_writel(value, (u32)reg_clk_base + (reg)) + __raw_writel(value, reg_clk_base + (reg)) #define clk_readl(reg) \ - __raw_readl((u32)reg_clk_base + (reg)) + __raw_readl(reg_clk_base + (reg)) #define pmc_writel(value, reg) \ - __raw_writel(value, (u32)reg_pmc_base + (reg)) + __raw_writel(value, reg_pmc_base + (reg)) #define pmc_readl(reg) \ - __raw_readl((u32)reg_pmc_base + (reg)) + __raw_readl(reg_pmc_base + (reg)) unsigned long clk_measure_input_freq(void) { @@ -918,7 +918,7 @@ static struct clk_ops tegra_pll_div_ops = { static void tegra2_periph_clk_init(struct clk *c) { u32 val = clk_readl(c->reg); - const struct clk_mux_sel *mux = 0; + const struct clk_mux_sel *mux = NULL; const struct clk_mux_sel *sel; if (c->flags & MUX) { for (sel = c->inputs; sel->input != NULL; sel++) { @@ -1459,7 +1459,7 @@ static struct clk tegra_pll_s = { static struct clk_mux_sel tegra_clk_m_sel[] = { { .input = &tegra_clk_32k, .value = 0}, { .input = &tegra_pll_s, .value = 1}, - { 0, 0}, + { NULL , 0}, }; static struct clk tegra_clk_m = { @@ -1861,7 +1861,7 @@ static const struct audio_sources { { .name = "ext_audio_clk1", .value = 6 }, { .name = "ext_vimclk", .value = 7 }, #endif - { 0, 0 } + { NULL, 0 } }; static struct clk tegra_clk_audio = { @@ -1885,7 +1885,7 @@ static struct clk tegra_clk_audio_2x = { }, }; -struct clk_lookup tegra_audio_clk_lookups[] = { +static struct clk_lookup tegra_audio_clk_lookups[] = { { .con_id = "audio", .clk = &tegra_clk_audio }, { .con_id = "audio_2x", .clk = &tegra_clk_audio_2x } }; @@ -1926,7 +1926,7 @@ static struct clk_mux_sel mux_cclk[] = { { .input = &tegra_pll_p_out3, .value = 6}, { .input = &tegra_clk_d, .value = 7}, { .input = &tegra_pll_x, .value = 8}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_sclk[] = { @@ -1938,7 +1938,7 @@ static struct clk_mux_sel mux_sclk[] = { { .input = &tegra_clk_d, .value = 5}, { .input = &tegra_clk_32k, .value = 6}, { .input = &tegra_pll_m_out1, .value = 7}, - { 0, 0}, + { NULL, 0}, }; static struct clk tegra_clk_cclk = { @@ -2009,7 +2009,7 @@ static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = { { .input = &tegra_pll_c, .value = 1}, { .input = &tegra_pll_p, .value = 2}, { .input = &tegra_pll_a_out0, .value = 3}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = { @@ -2017,7 +2017,7 @@ static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = { { .input = &tegra_pll_c, .value = 1}, { .input = &tegra_pll_p, .value = 2}, { .input = &tegra_clk_m, .value = 3}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = { @@ -2025,7 +2025,7 @@ static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = { { .input = &tegra_pll_c, .value = 1}, { .input = &tegra_pll_m, .value = 2}, { .input = &tegra_clk_m, .value = 3}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = { @@ -2033,7 +2033,7 @@ static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = { {.input = &tegra_clk_audio_2x, .value = 1}, {.input = &tegra_pll_p, .value = 2}, {.input = &tegra_clk_m, .value = 3}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = { @@ -2041,7 +2041,7 @@ static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = { {.input = &tegra_pll_d_out0, .value = 1}, {.input = &tegra_pll_c, .value = 2}, {.input = &tegra_clk_m, .value = 3}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = { @@ -2050,39 +2050,39 @@ static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = { {.input = &tegra_clk_audio, .value = 2}, {.input = &tegra_clk_m, .value = 3}, {.input = &tegra_clk_32k, .value = 4}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllp_pllc_pllm[] = { {.input = &tegra_pll_p, .value = 0}, {.input = &tegra_pll_c, .value = 1}, {.input = &tegra_pll_m, .value = 2}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_clk_m[] = { { .input = &tegra_clk_m, .value = 0}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pllp_out3[] = { { .input = &tegra_pll_p_out3, .value = 0}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_plld[] = { { .input = &tegra_pll_d, .value = 0}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_clk_32k[] = { { .input = &tegra_clk_32k, .value = 0}, - { 0, 0}, + { NULL, 0}, }; static struct clk_mux_sel mux_pclk[] = { { .input = &tegra_clk_pclk, .value = 0}, - { 0, 0}, + { NULL, 0}, }; static struct clk tegra_clk_emc = { @@ -2125,7 +2125,7 @@ static struct clk tegra_clk_emc = { .parent = _parent, \ } -struct clk tegra_list_clks[] = { +static struct clk tegra_list_clks[] = { PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), @@ -2221,7 +2221,7 @@ struct clk tegra_list_clks[] = { * configuration. List those here to register them twice in the clock lookup * table under two names. */ -struct clk_duplicate tegra_clk_duplicates[] = { +static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("uarta", "tegra_uart.0", NULL), CLK_DUPLICATE("uartb", "tegra_uart.1", NULL), CLK_DUPLICATE("uartc", "tegra_uart.2", NULL), @@ -2252,7 +2252,7 @@ struct clk_duplicate tegra_clk_duplicates[] = { .clk = ck, \ } -struct clk *tegra_ptr_clks[] = { +static struct clk *tegra_ptr_clks[] = { &tegra_clk_32k, &tegra_pll_s, &tegra_clk_m, diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 90350420c4e..e2272d263a8 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -62,9 +62,9 @@ static struct timespec persistent_ts; static u64 persistent_ms, last_persistent_ms; #define timer_writel(value, reg) \ - __raw_writel(value, (u32)timer_reg_base + (reg)) + __raw_writel(value, timer_reg_base + (reg)) #define timer_readl(reg) \ - __raw_readl((u32)timer_reg_base + (reg)) + __raw_readl(timer_reg_base + (reg)) static int tegra_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) @@ -133,7 +133,7 @@ static void notrace tegra_update_sched_clock(void) * tegra_rtc driver could be executing to avoid race conditions * on the RTC shadow register */ -u64 tegra_rtc_read_ms(void) +static u64 tegra_rtc_read_ms(void) { u32 ms = readl(rtc_base + RTC_MILLISECONDS); u32 s = readl(rtc_base + RTC_SHADOW_SECONDS); diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index 88081bb3ec5..37576a721ae 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -28,6 +28,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <asm/mach-types.h> +#include <mach/gpio-tegra.h> #include <mach/usb_phy.h> #include <mach/iomap.h> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 32a7b0f7e9f..1cbcd4fc1e1 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -6,6 +6,9 @@ comment "ST-Ericsson Mobile Platform Products" config MACH_U300 bool "U300" + select PINCTRL + select PINMUX_U300 + select GPIO_U300 comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" @@ -48,39 +51,12 @@ config MACH_U300_BS365 endchoice -choice - prompt "Memory configuration" - default MACH_U300_SINGLE_RAM - ---help--- - You have to config the kernel according to the physical memory - configuration. - -config MACH_U300_SINGLE_RAM - bool "Single RAM" - help - Select this if you want support for Single RAM phones. - -config MACH_U300_DUAL_RAM - bool "Dual RAM" - help - Select this if you want support for Dual RAM phones. - This is two RAM memories on different EMIFs. -endchoice - config U300_DEBUG bool "Debug support for U300" depends on PM help Debug support for U300 in sysfs, procfs etc. -config MACH_U300_SEMI_IS_SHARED - bool "The SEMI is used by both the access and application side" - depends on MACH_U300 - help - This makes it possible to use the SEMI (Shared External - Memory Interface) from both from access and application - side. - config MACH_U300_SPIDUMMY bool "SSP/SPI dummy chip" select SPI @@ -93,25 +69,6 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -comment "All the settings below must match the bootloader's settings" - -config MACH_U300_ACCESS_MEM_SIZE - int "Access CPU memory allocation" - range 7 25 - depends on MACH_U300_SINGLE_RAM - default 13 - help - How much memory in MiB that the Access side CPU has allocated - -config MACH_U300_2MB_ALIGNMENT_FIX - bool "2MiB alignment fix" - depends on MACH_U300_SINGLE_RAM - default y - help - If yes and the Access side CPU has allocated an odd size in - MiB, this fix gives you one MiB extra that would otherwise be - lost due to Linux 2 MiB alignment policy. - endmenu endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 8fd354aaf0a..285538124e5 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o padmux.o +obj-y := core.o clock.o timer.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot index 6fbfc6ea2d3..87811de0bd9 100644 --- a/arch/arm/mach-u300/Makefile.boot +++ b/arch/arm/mach-u300/Makefile.boot @@ -1,15 +1,4 @@ -# Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(TEXTADDR) -# PARAMS_PHYS must be within 4MB of ZRELADDR -# INITRD_PHYS must be in RAM - -ifdef CONFIG_MACH_U300_SINGLE_RAM - zreladdr-y := 0x28E08000 - params_phys-y := 0x28E00100 -else - zreladdr-y := 0x48008000 - params_phys-y := 0x48000100 -endif - + zreladdr-y += 0x48008000 +params_phys-y := 0x48000100 # This isn't used. -#initrd_phys-y := 0x29800000 +#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 376b6dfdfae..ac0791e924b 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -25,6 +25,8 @@ #include <linux/err.h> #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinmux.h> #include <linux/dma-mapping.h> #include <asm/types.h> @@ -38,6 +40,7 @@ #include <mach/hardware.h> #include <mach/syscon.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "clock.h" #include "mmc.h" @@ -69,25 +72,6 @@ static struct map_desc u300_io_desc[] __initdata = { .length = SZ_32K, .type = MT_DEVICE, }, - { - .virtual = 0xffff2000, /* TCM memory */ - .pfn = __phys_to_pfn(0xffff2000), - .length = SZ_16K, - .type = MT_DEVICE, - }, - - /* - * This overlaps with the IRQ vectors etc at 0xffff0000, so these - * may have to be moved to 0x00000000 in order to use the ROM. - */ - /* - { - .virtual = U300_BOOTROM_VIRT_BASE, - .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE), - .length = SZ_64K, - .type = MT_ROM, - }, - */ }; void __init u300_map_io(void) @@ -242,7 +226,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#ifdef U300_COH901571_3 +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -255,6 +239,7 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, +#endif #ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", @@ -269,7 +254,6 @@ static struct resource gpio_resources[] = { .flags = IORESOURCE_IRQ, }, #endif /* CONFIG_MACH_U300_BS335 */ -#endif /* U300_COH901571_3 */ }; static struct resource keypad_resources[] = { @@ -364,51 +348,6 @@ static struct resource wdog_resources[] = { } }; -/* TODO: These should be protected by suitable #ifdef's */ -static struct resource ave_resources[] = { - { - .name = "AVE3e I/O Area", - .start = U300_VIDEOENC_BASE, - .end = U300_VIDEOENC_BASE + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "AVE3e IRQ0", - .start = IRQ_U300_VIDEO_ENC_0, - .end = IRQ_U300_VIDEO_ENC_0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "AVE3e IRQ1", - .start = IRQ_U300_VIDEO_ENC_1, - .end = IRQ_U300_VIDEO_ENC_1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "AVE3e Physmem Area", - .start = 0, /* 0 will be remapped to reserved memory */ - .end = SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - /* - * The AVE3e requires two regions of 256MB that it considers - * "invisible". The hardware will not be able to access these - * addresses, so they should never point to system RAM. - */ - { - .name = "AVE3e Reserved 0", - .start = 0xd0000000, - .end = 0xd0000000 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "AVE3e Reserved 1", - .start = 0xe0000000, - .end = 0xe0000000 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, -}; - static struct resource dma_resource[] = { { .start = U300_DMAC_BASE, @@ -1538,6 +1477,14 @@ static struct coh901318_platform coh901318_platform = { .max_channels = U300_DMA_CHANNELS, }; +static struct resource pinmux_resources[] = { + { + .start = U300_SYSCON_BASE, + .end = U300_SYSCON_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device wdog_device = { .name = "coh901327_wdog", .id = -1, @@ -1559,11 +1506,35 @@ static struct platform_device i2c1_device = { .resource = i2c1_resources, }; +/* + * The different variants have a few different versions of the + * GPIO block, with different number of ports. + */ +static struct u300_gpio_platform u300_gpio_plat = { +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) + .variant = U300_GPIO_COH901335, + .ports = 3, +#endif +#ifdef CONFIG_MACH_U300_BS335 + .variant = U300_GPIO_COH901571_3_BS335, + .ports = 7, +#endif +#ifdef CONFIG_MACH_U300_BS365 + .variant = U300_GPIO_COH901571_3_BS365, + .ports = 5, +#endif + .gpio_base = 0, + .gpio_irq_base = IRQ_U300_GPIO_BASE, +}; + static struct platform_device gpio_device = { .name = "u300-gpio", .id = -1, .num_resources = ARRAY_SIZE(gpio_resources), .resource = gpio_resources, + .dev = { + .platform_data = &u300_gpio_plat, + }, }; static struct platform_device keypad_device = { @@ -1615,13 +1586,6 @@ static struct platform_device nand_device = { }, }; -static struct platform_device ave_device = { - .name = "video_enc", - .id = -1, - .num_resources = ARRAY_SIZE(ave_resources), - .resource = ave_resources, -}; - static struct platform_device dma_device = { .name = "coh901318", .id = -1, @@ -1633,6 +1597,72 @@ static struct platform_device dma_device = { }, }; +static struct platform_device pinmux_device = { + .name = "pinmux-u300", + .id = -1, + .num_resources = ARRAY_SIZE(pinmux_resources), + .resource = pinmux_resources, +}; + +/* Pinmux settings */ +static struct pinmux_map u300_pinmux_map[] = { + /* anonymous maps for chip power and EMIFs */ + PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"), + PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"), + PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"), + /* per-device maps for MMC/SD, SPI and UART */ + PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"), + PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"), + PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"), +}; + +struct u300_mux_hog { + const char *name; + struct device *dev; + struct pinmux *pmx; +}; + +static struct u300_mux_hog u300_mux_hogs[] = { + { + .name = "uart0", + .dev = &uart0_device.dev, + }, + { + .name = "spi0", + .dev = &pl022_device.dev, + }, + { + .name = "mmc0", + .dev = &mmcsd_device.dev, + }, +}; + +static int __init u300_pinmux_fetch(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { + struct pinmux *pmx; + int ret; + + pmx = pinmux_get(u300_mux_hogs[i].dev, NULL); + if (IS_ERR(pmx)) { + pr_err("u300: could not get pinmux hog %s\n", + u300_mux_hogs[i].name); + continue; + } + ret = pinmux_enable(pmx); + if (ret) { + pr_err("u300: could enable pinmux hog %s\n", + u300_mux_hogs[i].name); + continue; + } + u300_mux_hogs[i].pmx = pmx; + } + return 0; +} +subsys_initcall(u300_pinmux_fetch); + /* * Notice that AMBA devices are initialized before platform devices. * @@ -1646,10 +1676,9 @@ static struct platform_device *platform_devs[] __initdata = { &gpio_device, &nand_device, &wdog_device, - &ave_device + &pinmux_device, }; - /* * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected * together so some interrupts are connected to the first one and some @@ -1669,7 +1698,7 @@ void __init u300_init_irq(void) BUG_ON(IS_ERR(clk)); clk_enable(clk); - for (i = 0; i < NR_IRQS; i++) + for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); @@ -1831,6 +1860,10 @@ void __init u300_init_devices(void) u300_assign_physmem(); + /* Initialize pinmuxing */ + pinmux_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); + /* Register subdevices on the I2C buses */ u300_i2c_register_board_devices(); @@ -1840,17 +1873,10 @@ void __init u300_init_devices(void) /* Register subdevices on the SPI bus */ u300_spi_register_board_devices(); -#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED - /* - * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when - * both subsystems are requesting this mode. - * If we not share the Acc SDRAM, this is never the case. Therefore - * enable it here from the App side. - */ + /* Enable SEMI self refresh */ val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); -#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */ } static int core_module_init(void) diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h new file mode 100644 index 00000000000..0c2b2021951 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2007-2011 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif + +/** + * enum u300_gpio_variant - the type of U300 GPIO employed + */ +enum u300_gpio_variant { + U300_GPIO_COH901335, + U300_GPIO_COH901571_3_BS335, + U300_GPIO_COH901571_3_BS365, +}; + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @variant: IP block variant + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + */ +struct u300_gpio_platform { + enum u300_gpio_variant variant; + u8 ports; + int gpio_base; + int gpio_irq_base; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index d5a71abcbae..40a8c178f10 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -1,294 +1 @@ -/* - * - * arch/arm/mach-u300/include/mach/gpio.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_H -#define __MACH_U300_GPIO_H - -#include <linux/kernel.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -/* Switch type depending on platform/chip variant */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_COH901335 -#endif -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) -#define U300_COH901571_3 -#endif - -/* Get base address for regs here */ -#include "u300-regs.h" -/* IRQ numbers */ -#include "irqs.h" - -/* - * This is the GPIO block definitions. GPIO (General Purpose I/O) can be - * used for anything, and often is. The event/enable etc figures are for - * the lowermost pin (pin 0 on each port), shift this left to match your - * pin if you're gonna use these values. - */ -#ifdef U300_COH901335 -#define U300_GPIO_PORTX_SPACING (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_GPIO_PXPDIR (0x00) -#define U300_GPIO_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x04) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x08) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x0C) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x10) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x14) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x18) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_GPIO_CR (0x54) -#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) -/* three ports of 8 bits each = GPIO pins 0..23 */ -#define U300_GPIO_NUM_PORTS 3 -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -#ifdef U300_COH901571_3 -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_GPIO_CR (0x00) -#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -#define U300_GPIO_PORTX_SPACING (0x30) -/* Port X Pin Data INPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDIR (0x04) -/* Port X Pin Data OUTPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDOR (0x08) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x0C) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x10) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x14) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x18) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x1C) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x20) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -#ifdef CONFIG_MACH_U300_BS335 -/* seven ports of 8 bits each = GPIO pins 0..55 */ -#define U300_GPIO_NUM_PORTS 7 -#else -/* five ports of 8 bits each = GPIO pins 0..39 */ -#define U300_GPIO_NUM_PORTS 5 -#endif -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -/* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#ifdef CONFIG_MACH_U300_BS335 - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif - -/* translates a pin number to a port number */ -#define PIN_TO_PORT(val) (val >> 3) - -/* These can be found in arch/arm/mach-u300/gpio.c */ -extern int gpio_is_valid(int number); -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); -extern int gpio_register_callback(unsigned gpio, - int (*func)(void *arg), - void *); -extern int gpio_unregister_callback(unsigned gpio); -extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); -extern void disable_irq_on_gpio_pin(unsigned gpio); -extern void gpio_pullup(unsigned gpio, int value); -extern int gpio_get_value(unsigned gpio); -extern void gpio_set_value(unsigned gpio, int value); - -#define gpio_get_value_cansleep gpio_get_value -#define gpio_set_value_cansleep gpio_set_value - -/* wrappers to sleep-enable the previous two functions */ -static inline unsigned gpio_to_irq(unsigned gpio) -{ - return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - /* - * FIXME: This is no 1-1 mapping at all, it points to the - * whole block of 8 pins. - */ - return (irq - IRQ_U300_GPIO_PORT0) << 3; -} - -#endif +/* empty */ diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index 09b1b28fa8f..d270fea3292 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -72,7 +72,7 @@ /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_NR_IRQS 45 +#define U300_VIC_IRQS_END 45 #endif /* The DB3350-specific interrupt lines */ @@ -88,7 +88,7 @@ #define IRQ_U300_GPIO_PORT4 53 #define IRQ_U300_GPIO_PORT5 54 #define IRQ_U300_GPIO_PORT6 55 -#define U300_NR_IRQS 56 +#define U300_VIC_IRQS_END 56 #endif /* The DB3210-specific interrupt lines */ @@ -106,16 +106,25 @@ #define IRQ_U300_NFIF 45 #define IRQ_U300_NFIF2 46 #define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_NR_IRQS 48 +#define U300_VIC_IRQS_END 48 #endif -#ifdef CONFIG_AB3550_CORE -#define IRQ_AB3550_BASE (U300_NR_IRQS) -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) +/* Maximum 8*7 GPIO lines */ +#ifdef CONFIG_GPIO_U300 +#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) +#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) +#else +#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) +#endif -#define NR_IRQS (IRQ_AB3550_END + 1) +/* Optional AB3550 mixsig chip */ +#ifdef CONFIG_AB3550_CORE +#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END) +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38) #else -#define NR_IRQS U300_NR_IRQS +#define IRQ_AB3550_END (IRQ_U300_GPIO_END) #endif +#define NR_IRQS (IRQ_AB3550_END) + #endif diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index 7034bae95de..c808f347a08 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -13,25 +13,7 @@ #ifndef __MACH_MEMORY_H #define __MACH_MEMORY_H -#ifdef CONFIG_MACH_U300_DUAL_RAM - -#define PLAT_PHYS_OFFSET UL(0x48000000) -#define BOOT_PARAMS_OFFSET 0x100 - -#else - -#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX -#define PLAT_PHYS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) -#define BOOT_PARAMS_OFFSET (0x100 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2) -#else -#define PLAT_PHYS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) -#define BOOT_PARAMS_OFFSET 0x100 -#endif -#endif +#define PLAT_PHYS_OFFSET UL(0x48000000) +#define BOOT_PARAMS_OFFSET 0x100 #endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 7444f5c7da9..6e84f07a7c6 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -234,91 +234,6 @@ #define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) #define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) #define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) -/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ -#define U300_SYSCON_PMC1LR (0x007C) -#define U300_SYSCON_PMC1LR_MASK (0xFFFF) -#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) -#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) -#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000) -#elif CONFIG_MACH_U300_BS365 -#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) -#endif -#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) -#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) -#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) -#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000) -#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00) -#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000) -#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400) -#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800) -#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00) -#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300) -#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000) -#define U300_SYSCON_PMC1LR_ETM_APP (0x0100) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003) -#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002) -#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003) -/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ -#define U300_SYSCON_PMC1HR (0x007E) -#define U300_SYSCON_PMC1HR_MASK (0xFFFF) -#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000) -#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000) -#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000) -#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030) -#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010) -#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020) -#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030) -#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004) -#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008) -#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003) -#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001) -#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003) /* Step one for killing the applications system 16bit (-/W) */ #define U300_SYSCON_KA1R (0x0080) #define U300_SYSCON_KA1R_MASK (0xFFFF) @@ -357,57 +272,6 @@ #define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) #define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) #define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) -/* Padmux 2 control */ -#define U300_SYSCON_PMC2R (0x100) -#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040) -#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080) -#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100) -#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200) -#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400) -#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800) -#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000) -#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000) -#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000) -#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000) -#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000) -/* TODO: More SYSCON registers missing */ -#define U300_SYSCON_PMC3R (0x10c) -#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) -#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) -#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) -#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) -/* TODO: Missing other configs */ -#define U300_SYSCON_PMC4R (0x168) -#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003) -#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008) -#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020) -#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100) -#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200) /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ #define U300_SYSCON_S0CCR (0x120) #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 677ccef5cd3..4d482aacc27 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -13,15 +13,14 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <linux/dmaengine.h> #include <linux/amba/mmci.h> #include <linux/slab.h> #include <mach/coh901318.h> #include <mach/dma_channels.h> +#include <mach/gpio-u300.h> #include "mmc.h" -#include "padmux.h" static struct mmci_platform_data mmc0_plat_data = { /* @@ -45,24 +44,9 @@ static struct mmci_platform_data mmc0_plat_data = { int __devinit mmc_init(struct amba_device *adev) { struct device *mmcsd_device = &adev->dev; - struct pmx *pmx; int ret = 0; mmcsd_device->platform_data = &mmc0_plat_data; - /* - * Setup padmuxing for MMC. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING); - - if (IS_ERR(pmx)) - pr_warning("Could not get padmux handle\n"); - else { - ret = pmx_activate(mmcsd_device, pmx); - if (IS_ERR_VALUE(ret)) - pr_warning("Could not activate padmuxing\n"); - } - return ret; } diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c deleted file mode 100644 index 4c93c6cefd3..00000000000 --- a/arch/arm/mach-u300/padmux.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.c - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX functions - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/mutex.h> -#include <linux/string.h> -#include <linux/bug.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <mach/u300-regs.h> -#include <mach/syscon.h> -#include "padmux.h" - -static DEFINE_MUTEX(pmx_mutex); - -const u32 pmx_registers[] = { - (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC2R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC3R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC4R) -}; - -/* High level functionality */ - -/* Lazy dog: - * onmask = { - * {"PMC1LR" mask, "PMC1LR" value}, - * {"PMC1HR" mask, "PMC1HR" value}, - * {"PMC2R" mask, "PMC2R" value}, - * {"PMC3R" mask, "PMC3R" value}, - * {"PMC4R" mask, "PMC4R" value} - * } - */ -static struct pmx mmc_setting = { - .setting = U300_APP_PMX_MMC_SETTING, - .default_on = false, - .activated = false, - .name = "MMC", - .onmask = { - {U300_SYSCON_PMC1LR_MMCSD_MASK, - U300_SYSCON_PMC1LR_MMCSD_MMCSD}, - {0, 0}, - {0, 0}, - {0, 0}, - {U300_SYSCON_PMC4R_APP_MISC_12_MASK, - U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO} - }, -}; - -static struct pmx spi_setting = { - .setting = U300_APP_PMX_SPI_SETTING, - .default_on = false, - .activated = false, - .name = "SPI", - .onmask = {{0, 0}, - {U300_SYSCON_PMC1HR_APP_SPI_2_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK, - U300_SYSCON_PMC1HR_APP_SPI_2_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI}, - {0, 0}, - {0, 0}, - {0, 0} - }, -}; - -/* Available padmux settings */ -static struct pmx *pmx_settings[] = { - &mmc_setting, - &spi_setting, -}; - -static void update_registers(struct pmx *pmx, bool activate) -{ - u16 regval, val, mask; - int i; - - for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) { - if (activate) - val = pmx->onmask[i].val; - else - val = 0; - - mask = pmx->onmask[i].mask; - if (mask != 0) { - regval = readw(pmx_registers[i]); - regval &= ~mask; - regval |= val; - writew(regval, pmx_registers[i]); - } - } -} - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting) -{ - int i; - struct pmx *pmx = ERR_PTR(-ENOENT); - - if (dev == NULL) - return ERR_PTR(-EINVAL); - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (setting == pmx_settings[i]->setting) { - - if (pmx_settings[i]->dev != NULL) { - WARN(1, "padmux: required setting " - "in use by another consumer\n"); - } else { - pmx = pmx_settings[i]; - pmx->dev = dev; - dev_dbg(dev, "padmux: setting nr %d is now " - "bound to %s and ready to use\n", - setting, dev_name(dev)); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return pmx; -} -EXPORT_SYMBOL(pmx_get); - -int pmx_put(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot release handle as " - "it is bound to another consumer\n"); - ret = -EINVAL; - break; - } else { - pmx_settings[i]->dev = NULL; - ret = 0; - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_put); - -int pmx_activate(struct device *dev, struct pmx *pmx) -{ - int i, j, ret; - ret = 0; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - - /* Make sure the required bits are not used */ - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - if (pmx_settings[i]->onmask[j].mask & pmx-> - onmask[j].mask) { - /* More than one entry on the same bits */ - WARN(1, "padmux: cannot activate " - "setting. Bit conflict with " - "an active setting\n"); - - ret = -EUSERS; - goto exit; - } - } - } - update_registers(pmx, true); - pmx->activated = true; - dev_dbg(dev, "padmux: setting nr %d is activated\n", - pmx->setting); - -exit: - mutex_unlock(&pmx_mutex); - return ret; -} -EXPORT_SYMBOL(pmx_activate); - -int pmx_deactivate(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL) - continue; - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot deactivate " - "pmx setting as it was activated " - "by another consumer\n"); - - ret = -EBUSY; - continue; - } else { - update_registers(pmx, false); - pmx_settings[i]->dev = NULL; - pmx->activated = false; - ret = 0; - dev_dbg(dev, "padmux: setting nr %d is deactivated", - pmx->setting); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_deactivate); - -/* - * For internal use only. If it is to be exported, - * it should be reentrant. Notice that pmx_activate - * (i.e. runtime settings) always override default settings. - */ -static int pmx_set_default(void) -{ - /* Used to identify several entries on the same bits */ - u16 modbits[ARRAY_SIZE(pmx_registers)]; - - int i, j; - - memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16)); - - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (!pmx_settings[i]->default_on) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - /* Make sure there is only one entry on the same bits */ - if (modbits[j] & pmx_settings[i]->onmask[j].mask) { - BUG(); - return -EUSERS; - } - modbits[j] |= pmx_settings[i]->onmask[j].mask; - } - update_registers(pmx_settings[i], true); - } - return 0; -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -static int pmx_show(struct seq_file *s, void *data) -{ - int i; - seq_printf(s, "-------------------------------------------------\n"); - seq_printf(s, "SETTING BOUND TO DEVICE STATE\n"); - seq_printf(s, "-------------------------------------------------\n"); - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - /* Format pmx and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ? - dev_name(pmx_settings[i]->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - - seq_printf(s, - "%s\t%s\n", - &cdp[0], - pmx_settings[i]->activated ? - "ACTIVATED" : "DEACTIVATED" - ); - - } - mutex_unlock(&pmx_mutex); - return 0; -} - -static int pmx_open(struct inode *inode, struct file *file) -{ - return single_open(file, pmx_show, NULL); -} - -static const struct file_operations pmx_operations = { - .owner = THIS_MODULE, - .open = pmx_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_pmx_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view pmx settings */ - (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO, - NULL, NULL, - &pmx_operations); - return 0; -} - -/* - * This needs to come in after the core_initcall(), - * because debugfs is not available until - * the subsystems come up. - */ -module_init(init_pmx_read_debugfs); -#endif - -static int __init pmx_init(void) -{ - int ret; - - ret = pmx_set_default(); - - if (IS_ERR_VALUE(ret)) - pr_crit("padmux: default settings could not be set\n"); - - return 0; -} - -/* Should be initialized before consumers */ -core_initcall(pmx_init); diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h deleted file mode 100644 index 6e8b8606409..00000000000 --- a/arch/arm/mach-u300/padmux.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.h - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX API - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#ifndef __MACH_U300_PADMUX_H -#define __MACH_U300_PADMUX_H - -enum pmx_settings { - U300_APP_PMX_MMC_SETTING, - U300_APP_PMX_SPI_SETTING -}; - -struct pmx_onmask { - u16 mask; /* Mask bits */ - u16 val; /* Value when active */ -}; - -struct pmx { - struct device *dev; - enum pmx_settings setting; - char *name; - bool activated; - bool default_on; - struct pmx_onmask onmask[]; -}; - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting); -int pmx_put(struct device *dev, struct pmx *pmx); -int pmx_activate(struct device *dev, struct pmx *pmx); -int pmx_deactivate(struct device *dev, struct pmx *pmx); - -#endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 7b597e2b19e..a1affacfa59 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -14,8 +14,6 @@ #include <mach/coh901318.h> #include <mach/dma_channels.h> -#include "padmux.h" - /* * The following is for the actual devices on the SSP/SPI bus */ @@ -95,25 +93,7 @@ static struct pl022_ssp_controller ssp_platform_data = { void __init u300_spi_init(struct amba_device *adev) { - struct pmx *pmx; - adev->dev.platform_data = &ssp_platform_data; - /* - * Setup padmuxing for SPI. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING); - - if (IS_ERR(pmx)) - dev_warn(&adev->dev, "Could not get padmux handle\n"); - else { - int ret; - - ret = pmx_activate(&adev->dev, pmx); - if (IS_ERR_VALUE(ret)) - dev_warn(&adev->dev, "Could not activate padmuxing\n"); - } - } void __init u300_spi_register_board_devices(void) diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 80e7305589c..89422ee7f3a 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -23,21 +23,6 @@ #include <asm/mach/arch.h> #include <asm/memory.h> -static void __init u300_reserve(void) -{ - /* - * U300 - This platform family can share physical memory - * between two ARM cpus, one running Linux and the other - * running another OS. - */ -#ifdef CONFIG_MACH_U300_SINGLE_RAM -#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ - CONFIG_MACH_U300_2MB_ALIGNMENT_FIX - memblock_reserve(PHYS_OFFSET, 0x00100000); -#endif -#endif -} - static void __init u300_init_machine(void) { u300_init_devices(); @@ -63,7 +48,6 @@ MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, - .reserve = u300_reserve, .init_irq = u300_init_irq, .timer = &u300_timer, .init_machine = u300_init_machine, diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 1694916e682..6bd2f451c18 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -3,7 +3,8 @@ # obj-y := clock.o cpu.o devices.o devices-common.o \ - id.o usb.o + id.o usb.o timer.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index c7e75acfe6c..ff0a4b5b0a8 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f26fd76f72b..74bfcff2bdf 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -6,10 +6,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include "pins-db8500.h" @@ -153,7 +153,7 @@ static pin_cfg_t mop500_pins_default[] = { GPIO7_U1_RTSn | PIN_OUTPUT_HIGH, }; -static pin_cfg_t mop500_pins_hrefv60[] = { +static pin_cfg_t hrefv60_pins[] = { /* WLAN */ GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ @@ -279,14 +279,26 @@ static pin_cfg_t snowball_pins[] = { void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); - if (machine_is_hrefv60()) - nmk_config_pins(mop500_pins_hrefv60, - ARRAY_SIZE(mop500_pins_hrefv60)); - else if (machine_is_snowball()) - nmk_config_pins(snowball_pins, - ARRAY_SIZE(snowball_pins)); - else - nmk_config_pins(mop500_pins_default, - ARRAY_SIZE(mop500_pins_default)); + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(mop500_pins_default, + ARRAY_SIZE(mop500_pins_default)); +} + +void __init snowball_pins_init(void) +{ + nmk_config_pins(mop500_pins_common, + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); +} + +void __init hrefv60_pins_init(void) +{ + nmk_config_pins(mop500_pins_common, + ARRAY_SIZE(mop500_pins_common)); + + nmk_config_pins(hrefv60_pins, + ARRAY_SIZE(hrefv60_pins)); } diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index d0cb9e5eb87..6826faeecc6 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -216,30 +216,48 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ - if (!machine_is_snowball()) - db8500_add_sdi2(&mop500_sdi2_data, periphid); + + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60() || machine_is_snowball()) { - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - } else if (machine_is_snowball()) { - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - } - sdi0_configure(); - } - /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls * mop500_sdi_tc35892_init() above. */ } + +void __init snowball_sdi_init(void) +{ + u32 periphid = 0x10480180; + + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + + /* On-board eMMC */ + db8500_add_sdi4(&mop500_sdi4_data, periphid); + + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + sdi0_configure(); +} + +void __init hrefv60_sdi_init(void) +{ + u32 periphid = 0x10480180; + + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + + db8500_add_sdi2(&mop500_sdi2_data, periphid); + + /* On-board eMMC */ + db8500_add_sdi4(&mop500_sdi4_data, periphid); + + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + sdi0_configure(); +} diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index 8ce46c0fdfd..feb5744d98b 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -4,7 +4,7 @@ * Board data for the U8500 UIB, also known as the New UIB * License terms: GNU General Public License (GPL), version 2 */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> @@ -13,7 +13,6 @@ #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 2cc4876db21..bdd7b80dd7a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -37,6 +37,7 @@ #include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -603,28 +604,72 @@ static void __init mop500_init_machine(void) { int i2c0_devs; + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + + u8500_init_devices(); + + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_i2c_init(); + mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init snowball_init_machine(void) +{ + int i2c0_devs; + + u8500_init_devices(); + + snowball_pins_init(); + + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + mop500_i2c_init(); + snowball_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init hrefv60_init_machine(void) +{ + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller * instead. */ - if (!machine_is_snowball()) { - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - } + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; u8500_init_devices(); - mop500_pins_init(); + hrefv60_pins_init(); - if (machine_is_snowball()) - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - else - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); @@ -632,8 +677,8 @@ static void __init mop500_init_machine(void) mop500_uart_init(); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - if (machine_is_hrefv60()) - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -658,7 +703,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = hrefv60_init_machine, MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") @@ -667,5 +712,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = snowball_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index ee77a8970c3..de18a2a23e6 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -40,10 +40,13 @@ struct i2c_board_info; extern void mop500_sdi_init(void); +extern void snowball_sdi_init(void); extern void mop500_sdi_tc35892_init(void); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); void __init mop500_pins_init(void); +void __init hrefv60_pins_init(void); +void __init snowball_pins_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 739fb4c5b16..63c3f8058ff 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -7,9 +7,9 @@ #include <linux/amba/mmci.h> #include <linux/mmc/host.h> -#include <linux/gpio.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/db5500-regs.h> #include <plat/ste_dma40.h> diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 166d47a5f4f..e014aa749b0 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -8,7 +8,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> @@ -17,6 +16,7 @@ #include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c new file mode 100644 index 00000000000..122ddde00ba --- /dev/null +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/io.h> +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> +#include <mach/hardware.h> +#include <mach/id.h> + +static void __iomem *l2x0_base; + +static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) +{ + /* wait for the operation to complete */ + while (readl_relaxed(reg) & mask) + cpu_relax(); +} + +static inline void ux500_cache_sync(void) +{ + writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); + ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); +} + +/* + * The L2 cache cannot be turned off in the non-secure world. + * Dummy until a secure service is in place. + */ +static void ux500_l2x0_disable(void) +{ +} + +/* + * This is only called when doing a kexec, just after turning off the L2 + * and L1 cache, and it is surrounded by a spinlock in the generic version. + * However, we're not really turning off the L2 cache right now and the + * PL310 does not support exclusive accesses (used to implement the spinlock). + * So, the invalidation needs to be done without the spinlock. + */ +static void ux500_l2x0_inv_all(void) +{ + uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ + + /* invalidate all ways */ + writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); + ux500_cache_sync(); +} + +static int __init ux500_l2x0_unlock(void) +{ + int i; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + return 0; +} + +static int __init ux500_l2x0_init(void) +{ + if (cpu_is_u5500()) + l2x0_base = __io_address(U5500_L2CC_BASE); + else if (cpu_is_u8500()) + l2x0_base = __io_address(U8500_L2CC_BASE); + else + ux500_unknown_soc(); + + /* Unlock before init */ + ux500_l2x0_unlock(); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + /* Override invalidate function */ + outer_cache.disable = ux500_l2x0_disable; + outer_cache.inv_all = ux500_l2x0_inv_all; + + return 0; +} + +early_initcall(ux500_l2x0_init); diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 22705d246fc..9de1af00809 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -13,7 +13,7 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 4598b06c8c5..13e8890a8b8 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -14,12 +14,12 @@ #include <linux/amba/bus.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/io.h> #include <asm/mach/map.h> #include <asm/pmu.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 1da23bb87c1..1405d0eb7ed 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -10,14 +10,12 @@ #include <linux/clk.h> #include <linux/mfd/db8500-prcmu.h> #include <linux/mfd/db5500-prcmu.h> +#include <linux/clksrc-dbx500-prcmu.h> -#include <asm/cacheflush.h> -#include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <asm/localtimer.h> -#include <plat/mtu.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> @@ -26,10 +24,6 @@ void __iomem *_PRCMU_BASE; -#ifdef CONFIG_CACHE_L2X0 -static void __iomem *l2x0_base; -#endif - void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -56,93 +50,3 @@ void __init ux500_init_irq(void) prcmu_early_init(); clk_init(); } - -#ifdef CONFIG_CACHE_L2X0 -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - ; -} - -static inline void ux500_cache_sync(void) -{ - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + L2X0_CACHE_SYNC); - ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - void __iomem *base = l2x0_base; - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY); - ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - -static int ux500_l2x0_init(void) -{ - if (cpu_is_u5500()) - l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) - l2x0_base = __io_address(U8500_L2CC_BASE); - else - ux500_unknown_soc(); - - /* 64KB way size, 8 way associativity, force WA */ - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; - - return 0; -} -early_initcall(ux500_l2x0_init); -#endif - -static void __init ux500_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - /* Setup the local timer base */ - if (cpu_is_u5500()) - twd_base = __io_address(U5500_TWD_BASE); - else if (cpu_is_u8500()) - twd_base = __io_address(U8500_TWD_BASE); - else - ux500_unknown_soc(); -#endif - if (cpu_is_u5500()) - mtu_base = __io_address(U5500_MTU0_BASE); - else if (cpu_is_u8500ed()) - mtu_base = __io_address(U8500_MTU0_BASE_ED); - else if (cpu_is_u8500()) - mtu_base = __io_address(U8500_MTU0_BASE); - else - ux500_unknown_soc(); - - nmdk_timer_init(); -} - -struct sys_timer ux500_timer = { - .init = ux500_timer_init, -}; diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 13a4ce046ae..c563e5418d8 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> -#include <plat/gpio.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index dd8037ebccf..572015e57cd 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -24,7 +24,7 @@ static inline void platform_do_lowpower(unsigned int cpu) for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" : : : "memory"); - if (pen_release == cpu) { + if (pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 6ad98329410..994b5fe6f85 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -61,6 +61,8 @@ #define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) #define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) #define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) +#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338) +#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) #define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) #define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) #define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 049997109cf..751b0e6938d 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -102,10 +102,13 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) +#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) + /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) #define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index 3c4cd31ad9f..7389df911b1 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -7,6 +7,4 @@ */ #define ARCH_NR_GPIOS 350 -#include <plat/gpio.h> - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 7dd08074c37..6fb3c4b0105 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -51,15 +51,9 @@ static void flush(void) static inline void arch_decomp_setup(void) { /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u8500() || - machine_is_svp8500v1() || - machine_is_svp8500v2() || - machine_is_hrefv60() || - machine_is_snowball()) - ux500_uart_base = U8500_UART2_BASE; - else if (machine_is_u5500()) + if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; - else /* not much can be done to help here */ + else ux500_uart_base = U8500_UART2_BASE; } diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index f923764ee16..8b1d1a7a679 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -35,40 +35,40 @@ #define GPIO4_GPIO PIN_CFG(4, GPIO) #define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) +#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP) #define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) #define GPIO5_GPIO PIN_CFG(5, GPIO) #define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) +#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP) #define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) #define GPIO6_GPIO PIN_CFG(6, GPIO) #define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) +#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP) #define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) #define GPIO7_GPIO PIN_CFG(7, GPIO) #define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) +#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP) #define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) #define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) -#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) +#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP) +#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP) #define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) -#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) +#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP) +#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP) #define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) -#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) +#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP) +#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP) #define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) #define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) -#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) +#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP) +#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP) #define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) #define GPIO12_GPIO PIN_CFG(12, GPIO) @@ -87,66 +87,66 @@ #define GPIO16_GPIO PIN_CFG(16, GPIO) #define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) +#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP) #define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) #define GPIO17_GPIO PIN_CFG(17, GPIO) #define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) +#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP) #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP) +#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP) #define GPIO18_U2_RXD PIN_CFG(18, ALT_B) #define GPIO18_MS_IEP PIN_CFG(18, ALT_C) #define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP) +#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP) #define GPIO19_U2_TXD PIN_CFG(19, ALT_B) #define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) #define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP) +#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP) #define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) #define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) #define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP) +#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP) #define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) #define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) #define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP) +#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP) #define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) #define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) #define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP) +#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP) #define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) #define GPIO23_MS_CLK PIN_CFG(23, ALT_C) #define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP) +#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP) #define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) #define GPIO24_MS_BS PIN_CFG(24, ALT_C) #define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP) +#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP) #define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) #define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) #define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP) +#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP) #define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) #define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) #define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP) +#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP) #define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) #define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) #define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP) +#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP) #define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) #define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) @@ -357,48 +357,48 @@ #define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) #define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP) +#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP) #define GPIO128_SM_CKO PIN_CFG(128, ALT_B) #define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP) +#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP) #define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) #define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP) +#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP) #define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) #define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) #define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP) +#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP) #define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) #define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP) +#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP) #define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) #define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP) +#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP) #define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) #define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP) +#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP) #define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) #define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP) +#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP) #define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) #define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP) +#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP) #define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) #define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP) +#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP) #define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) #define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP) +#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP) #define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) #define GPIO139_GPIO PIN_CFG(139, GPIO) @@ -434,10 +434,10 @@ #define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) #define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) +#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP) #define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) +#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP) #define GPIO149_GPIO PIN_CFG(149, GPIO) #define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) @@ -459,82 +459,82 @@ #define GPIO152_KP_O9 PIN_CFG(152, ALT_C) #define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) +#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN) #define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) #define GPIO153_U2_RXD PIN_CFG(153, ALT_C) #define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) +#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN) #define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) #define GPIO154_U2_TXD PIN_CFG(154, ALT_C) #define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) +#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN) #define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) #define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) #define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) +#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN) #define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) #define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) #define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) +#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP) #define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) #define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) #define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) +#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP) #define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) #define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) #define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) +#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP) #define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) #define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) #define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) +#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP) #define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) #define GPIO160_NONE PIN_CFG(160, ALT_C) #define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) +#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN) #define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) #define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) #define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) +#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN) #define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) #define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) #define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) +#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN) #define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) #define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) #define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) +#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP) #define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) #define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) #define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) +#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP) #define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) #define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) #define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) +#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP) #define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) #define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) #define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) +#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP) #define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) #define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) #define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) +#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP) #define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) #define GPIO168_NONE PIN_CFG(168, ALT_C) @@ -569,39 +569,39 @@ #define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) #define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP) +#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP) #define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP) +#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP) #define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP) +#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP) #define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP) +#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP) #define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP) +#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP) #define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP) +#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP) #define GPIO202_PWL PIN_CFG(202, ALT_B) #define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) #define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP) +#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP) #define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP) +#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP) #define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP) +#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP) #define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP) +#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP) #define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP) +#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP) #define GPIO208_GPIO PIN_CFG(208, GPIO) #define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) @@ -632,21 +632,25 @@ #define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) #define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) #define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) +#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C) #define GPIO216_GPIO PIN_CFG(216, GPIO) #define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) #define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) +#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP) +#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C) #define GPIO217_GPIO PIN_CFG(217, GPIO) #define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) #define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) #define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) +#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C) #define GPIO218_GPIO PIN_CFG(218, GPIO) #define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) #define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) +#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP) +#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C) #define GPIO219_GPIO PIN_CFG(219, GPIO) #define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) @@ -694,12 +698,12 @@ #define GPIO229_GPIO PIN_CFG(229, GPIO) #define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) #define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) +#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP) #define GPIO230_GPIO PIN_CFG(230, GPIO) #define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) #define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) +#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP) #define GPIO256_GPIO PIN_CFG(256, GPIO) #define GPIO256_USB_NXT PIN_CFG(256, ALT_A) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index eb5199102cf..a19e398dade 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -96,7 +96,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the holding pen - release it, then wait for it to flag * that it has been released by resetting pen_release. */ - write_pen_release(cpu); + write_pen_release(cpu_logical_map(cpu)); gic_raise_softirq(cpumask_of(cpu), 1); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c new file mode 100644 index 00000000000..aea467d04ff --- /dev/null +++ b/arch/arm/mach-ux500/timer.c @@ -0,0 +1,68 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * License Terms: GNU General Public License v2 + * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson + */ +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/clksrc-dbx500-prcmu.h> + +#include <asm/localtimer.h> + +#include <plat/mtu.h> + +#include <mach/setup.h> +#include <mach/hardware.h> + +static void __init ux500_timer_init(void) +{ + void __iomem *prcmu_timer_base; + + if (cpu_is_u5500()) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base = __io_address(U5500_TWD_BASE); +#endif + mtu_base = __io_address(U5500_MTU0_BASE); + prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); + } else if (cpu_is_u8500()) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base = __io_address(U8500_TWD_BASE); +#endif + mtu_base = __io_address(U8500_MTU0_BASE); + prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); + } else { + ux500_unknown_soc(); + } + + /* + * Here we register the timerblocks active in the system. + * Localtimers (twd) is started when both cpu is up and running. + * MTU register a clocksource, clockevent and sched_clock. + * Since the MTU is located in the VAPE power domain + * it will be cleared in sleep which makes it unsuitable. + * We however need it as a timer tick (clockevent) + * during boot to calibrate delay until twd is started. + * RTC-RTT have problems as timer tick during boot since it is + * depending on delay which is not yet calibrated. RTC-RTT is in the + * always-on powerdomain and is used as clockevent instead of twd when + * sleeping. + * The PRCMU timer 4(3 for DB5500) register a clocksource and + * sched_clock with higher rating then MTU since is always-on. + * + */ + + nmdk_timer_init(); + clksrc_dbx500_prcmu_init(prcmu_timer_base); +} + +static void ux500_timer_reset(void) +{ + nmdk_clkevt_reset(); + nmdk_clksrc_reset(); +} + +struct sys_timer ux500_timer = { + .init = ux500_timer_init, + .resume = ux500_timer_reset, +}; diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot index c7e75acfe6c..ff0a4b5b0a8 100644 --- a/arch/arm/mach-versatile/Makefile.boot +++ b/arch/arm/mach-versatile/Makefile.boot @@ -1,4 +1,4 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h index 94ff27678a4..40a8c178f10 100644 --- a/arch/arm/mach-versatile/include/mach/gpio.h +++ b/arch/arm/mach-versatile/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 07c2d9c457e..8630b3d10a4 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x60008000 + zreladdr-y += 0x60008000 params_phys-y := 0x60000100 initrd_phys-y := 0x60800000 diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index ea4cbfb90a6..813ee08f96e 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/system.h> extern volatile int pen_release; @@ -62,15 +63,9 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * code will have already disabled interrupts */ for (;;) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); + wfi(); - if (pen_release == cpu) { + if (pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-vexpress/include/mach/gpio.h b/arch/arm/mach-vexpress/include/mach/gpio.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/gpio.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h index 748bb524ee7..13522d86685 100644 --- a/arch/arm/mach-vexpress/include/mach/io.h +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot index a8acc4e2490..b79c41cdfdf 100644 --- a/arch/arm/mach-vt8500/Makefile.boot +++ b/arch/arm/mach-vt8500/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x01000000 diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h index 94ff27678a4..40a8c178f10 100644 --- a/arch/arm/mach-vt8500/include/mach/gpio.h +++ b/arch/arm/mach-vt8500/include/mach/gpio.h @@ -1,6 +1 @@ -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +/* empty */ diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h index 9077239f78c..46181eecf27 100644 --- a/arch/arm/mach-vt8500/include/mach/io.h +++ b/arch/arm/mach-vt8500/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - #define __io(a) __typesafe_io((a) + 0xf0000000) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-w90x900/Makefile.boot b/arch/arm/mach-w90x900/Makefile.boot index a057b546b6e..6c3d421c2d1 100644 --- a/arch/arm/mach-w90x900/Makefile.boot +++ b/arch/arm/mach-w90x900/Makefile.boot @@ -1,3 +1,3 @@ -zreladdr-y := 0x00008000 +zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 83c56324a47..0a235e50233 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -60,7 +60,7 @@ static DEFINE_CLK(emc, 7); static DEFINE_SUBCLK(rmii, 2); static DEFINE_CLK(usbd, 8); static DEFINE_CLK(usbh, 9); -static DEFINE_CLK(g2d, 10);; +static DEFINE_CLK(g2d, 10); static DEFINE_CLK(pwm, 18); static DEFINE_CLK(ps2, 24); static DEFINE_CLK(kpi, 25); diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h index 034da3e390c..5385a420327 100644 --- a/arch/arm/mach-w90x900/include/mach/gpio.h +++ b/arch/arm/mach-w90x900/include/mach/gpio.h @@ -15,16 +15,12 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep static inline int gpio_to_irq(unsigned gpio) { return gpio; } +#define gpio_to_irq gpio_to_irq static inline int irq_to_gpio(unsigned irq) { diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-zynq/Makefile.boot +++ b/arch/arm/mach-zynq/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index cfbcf8b9559..c335c76e0d8 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -86,16 +86,6 @@ core_param(alignment, ai_usermode, int, 0600); #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) -#ifdef CONFIG_PROC_FS -static const char *usermode_action[] = { - "ignored", - "warn", - "fixup", - "fixup+warn", - "signal", - "signal+warn" -}; - /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { @@ -123,6 +113,16 @@ static int safe_usermode(int new_usermode, bool warn) return new_usermode; } +#ifdef CONFIG_PROC_FS +static const char *usermode_action[] = { + "ignored", + "warn", + "fixup", + "fixup+warn", + "signal", + "signal+warn" +}; + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 9ecfdb51195..8ac9e9f8479 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,9 +16,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/err.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -26,15 +29,23 @@ #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; -static DEFINE_SPINLOCK(l2x0_lock); +static DEFINE_RAW_SPINLOCK(l2x0_lock); static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static uint32_t l2x0_size; +struct l2x0_regs l2x0_saved_regs; + +struct l2x0_of_data { + void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*save)(void); + void (*resume)(void); +}; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) - ; + cpu_relax(); } #ifdef CONFIG_CACHE_PL310 @@ -115,9 +126,9 @@ static void l2x0_cache_sync(void) { unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void __l2x0_flush_all(void) @@ -134,9 +145,9 @@ static void l2x0_flush_all(void) unsigned long flags; /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); __l2x0_flush_all(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_all(void) @@ -144,11 +155,11 @@ static void l2x0_clean_all(void) unsigned long flags; /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_all(void) @@ -156,13 +167,13 @@ static void l2x0_inv_all(void) unsigned long flags; /* invalidate all ways */ - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); /* Invalidating when L2 is enabled is a nono */ BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) @@ -170,7 +181,7 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) void __iomem *base = l2x0_base; unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); debug_writel(0x03); @@ -195,13 +206,13 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) } if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_INV_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) @@ -214,7 +225,7 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) return; } - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); @@ -225,13 +236,13 @@ static void l2x0_clean_range(unsigned long start, unsigned long end) } if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_CLEAN_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) @@ -244,7 +255,7 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) return; } - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); @@ -257,27 +268,27 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) debug_writel(0x00); if (blk_end < end) { - spin_unlock_irqrestore(&l2x0_lock, flags); - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); } } cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); cache_sync(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_disable(void) { unsigned long flags; - spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_lock_irqsave(&l2x0_lock, flags); __l2x0_flush_all(); writel_relaxed(0, l2x0_base + L2X0_CTRL); dsb(); - spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void __init l2x0_unlock(__u32 cache_id) +static void l2x0_unlock(__u32 cache_id) { int lockregs; int i; @@ -353,6 +364,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + l2x0_saved_regs.aux_ctrl = aux; + l2x0_inv_all(); /* enable L2X0 */ @@ -372,3 +385,202 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", ways, cache_id, aux, l2x0_size); } + +#ifdef CONFIG_OF +static void __init l2x0_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static void __init pl310_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, + l2x0_base + L2X0_ADDR_FILTER_START); + } +} + +static void __init pl310_save(void) +{ + u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + + L2X0_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + + L2X0_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_START); + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + /* + * From r2p0, there is Prefetch offset/control register + */ + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + + L2X0_PREFETCH_CTRL); + /* + * From r3p0, there is Power control register + */ + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + + L2X0_POWER_CTRL); + } +} + +static void l2x0_resume(void) +{ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore aux ctrl and enable l2 */ + l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); + + writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + writel_relaxed(1, l2x0_base + L2X0_CTRL); + } +} + +static void pl310_resume(void) +{ + u32 l2x0_revision; + + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + l2x0_base + L2X0_ADDR_FILTER_START); + + l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + l2x0_base + L2X0_PREFETCH_CTRL); + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + writel_relaxed(l2x0_saved_regs.pwr_ctrl, + l2x0_base + L2X0_POWER_CTRL); + } + } + + l2x0_resume(); +} + +static const struct l2x0_of_data pl310_data = { + pl310_of_setup, + pl310_save, + pl310_resume, +}; + +static const struct l2x0_of_data l2x0_data = { + l2x0_of_setup, + NULL, + l2x0_resume, +}; + +static const struct of_device_id l2x0_ids[] __initconst = { + { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, + { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, + { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + {} +}; + +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + struct device_node *np; + struct l2x0_of_data *data; + struct resource res; + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + l2x0_base = ioremap(res.start, resource_size(&res)); + if (!l2x0_base) + return -ENOMEM; + + l2x0_saved_regs.phy_base = res.start; + + data = of_match_node(l2x0_ids, np)->data; + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (data->setup) + data->setup(np, &aux_val, &aux_mask); + } + + if (data->save) + data->save(); + + l2x0_init(l2x0_base, aux_val, aux_mask); + + outer_cache.resume = data->resume; + return 0; +} +#endif diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba3cfa..93aac068da9 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -16,7 +16,7 @@ #include <asm/mmu_context.h> #include <asm/tlbflush.h> -static DEFINE_SPINLOCK(cpu_asid_lock); +static DEFINE_RAW_SPINLOCK(cpu_asid_lock); unsigned int cpu_last_asid = ASID_FIRST_VERSION; #ifdef CONFIG_SMP DEFINE_PER_CPU(struct mm_struct *, current_mm); @@ -31,7 +31,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { mm->context.id = 0; - spin_lock_init(&mm->context.id_lock); + raw_spin_lock_init(&mm->context.id_lock); } static void flush_context(void) @@ -58,7 +58,7 @@ static void set_mm_context(struct mm_struct *mm, unsigned int asid) * the broadcast. This function is also called via IPI so the * mm->context.id_lock has to be IRQ-safe. */ - spin_lock_irqsave(&mm->context.id_lock, flags); + raw_spin_lock_irqsave(&mm->context.id_lock, flags); if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) { /* * Old version of ASID found. Set the new one and @@ -67,7 +67,7 @@ static void set_mm_context(struct mm_struct *mm, unsigned int asid) mm->context.id = asid; cpumask_clear(mm_cpumask(mm)); } - spin_unlock_irqrestore(&mm->context.id_lock, flags); + raw_spin_unlock_irqrestore(&mm->context.id_lock, flags); /* * Set the mm_cpumask(mm) bit for the current CPU. @@ -117,7 +117,7 @@ void __new_context(struct mm_struct *mm) { unsigned int asid; - spin_lock(&cpu_asid_lock); + raw_spin_lock(&cpu_asid_lock); #ifdef CONFIG_SMP /* * Check the ASID again, in case the change was broadcast from @@ -125,7 +125,7 @@ void __new_context(struct mm_struct *mm) */ if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) { cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - spin_unlock(&cpu_asid_lock); + raw_spin_unlock(&cpu_asid_lock); return; } #endif @@ -153,5 +153,5 @@ void __new_context(struct mm_struct *mm) } set_mm_context(mm, asid); - spin_unlock(&cpu_asid_lock); + raw_spin_unlock(&cpu_asid_lock); } diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index b8061519ce7..7d0a8c23034 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -30,7 +30,7 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) -static DEFINE_SPINLOCK(minicache_lock); +static DEFINE_RAW_SPINLOCK(minicache_lock); /* * ARMv4 mini-dcache optimised copy_user_highpage @@ -76,14 +76,14 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); - spin_lock(&minicache_lock); + raw_spin_lock(&minicache_lock); set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(0xffff8000); mc_copy_user_page((void *)0xffff8000, kto); - spin_unlock(&minicache_lock); + raw_spin_unlock(&minicache_lock); kunmap_atomic(kto, KM_USER1); } diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 63cca009713..3d9a1552cef 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -27,7 +27,7 @@ #define from_address (0xffff8000) #define to_address (0xffffc000) -static DEFINE_SPINLOCK(v6_lock); +static DEFINE_RAW_SPINLOCK(v6_lock); /* * Copy the user page. No aliasing to deal with so we can just @@ -88,7 +88,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, * Now copy the page using the same cache colour as the * pages ultimate destination. */ - spin_lock(&v6_lock); + raw_spin_lock(&v6_lock); set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0); set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0); @@ -101,7 +101,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, copy_page((void *)kto, (void *)kfrom); - spin_unlock(&v6_lock); + raw_spin_unlock(&v6_lock); } /* @@ -121,13 +121,13 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad * Now clear the page using the same cache colour as * the pages ultimate destination. */ - spin_lock(&v6_lock); + raw_spin_lock(&v6_lock); set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0); flush_tlb_kernel_page(to); clear_page((void *)to); - spin_unlock(&v6_lock); + raw_spin_unlock(&v6_lock); } struct cpu_user_fns v6_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 649bbcd325b..610c24ced31 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -32,7 +32,7 @@ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) -static DEFINE_SPINLOCK(minicache_lock); +static DEFINE_RAW_SPINLOCK(minicache_lock); /* * XScale mini-dcache optimised copy_user_highpage @@ -98,14 +98,14 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); - spin_lock(&minicache_lock); + raw_spin_lock(&minicache_lock); set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(COPYPAGE_MINICACHE); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); - spin_unlock(&minicache_lock); + raw_spin_unlock(&minicache_lock); kunmap_atomic(kto, KM_USER1); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 01f5987eb1a..e4e7f6cba1a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -120,9 +120,8 @@ static void __dma_free_buffer(struct page *page, size_t size) #ifdef CONFIG_MMU - #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT) /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations @@ -206,7 +205,7 @@ static int __init consistent_init(void) } consistent_pte[i++] = pte; - base += (1 << PGDIR_SHIFT); + base += PMD_SIZE; } while (base < CONSISTENT_END); return ret; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ab506272b2d..bdb248c4f55 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -289,6 +289,27 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) } EXPORT_SYMBOL(__arm_ioremap); +/* + * Remap an arbitrary physical address space into the kernel virtual + * address space as memory. Needed when the kernel wants to execute + * code in external memory. This is needed for reprogramming source + * clocks that would affect normal memory for example. Please see + * CONFIG_GENERIC_ALLOCATOR for allocating external memory. + */ +void __iomem * +__arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached) +{ + unsigned int mtype; + + if (cached) + mtype = MT_MEMORY; + else + mtype = MT_MEMORY_NONCACHED; + + return __arm_ioremap_caller(phys_addr, size, mtype, + __builtin_return_address(0)); +} + void __iounmap(volatile void __iomem *io_addr) { void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 010566799c8..ad7cce3bc43 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -12,8 +12,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; + pmdval_t prot_l1; + pmdval_t prot_sect; unsigned int domain; }; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ea9c9f3e48b..dc8c550e6cb 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -60,7 +60,7 @@ EXPORT_SYMBOL(pgprot_kernel); struct cachepolicy { const char policy[16]; unsigned int cr_mask; - unsigned int pmd; + pmdval_t pmd; pteval_t pte; }; @@ -296,7 +296,7 @@ static void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot, vecs_pgprot; + pteval_t user_pgprot, kern_pgprot, vecs_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -871,14 +871,14 @@ static inline void prepare_page_table(void) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK; + addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; #endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* @@ -893,10 +893,12 @@ static inline void prepare_page_table(void) * memory bank, up to the end of the vmalloc region. */ for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PGDIR_SIZE) + addr < VMALLOC_END; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); } +#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) + /* * Reserve the special regions of memory */ @@ -906,7 +908,7 @@ void __init arm_mm_memblock_reserve(void) * Reserve the page tables. These are already in use, * and can only be in node 0. */ - memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); + memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE); #ifdef CONFIG_SA1111 /* @@ -934,7 +936,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ vectors_page = early_alloc(PAGE_SIZE); - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + for (addr = VMALLOC_END; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 6af366ce016..2c559ac3814 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -218,7 +218,7 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 7 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 502e45f0317..4bdc975581e 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -26,7 +26,7 @@ config ARCH_MX5 select AUTO_ZRELADDR select ARM_PATCH_PHYS_VIRT help - This enables support for machines using Freescale's i.MX50 and i.MX51 + This enables support for machines using Freescale's i.MX50 and i.MX53 processors. endchoice diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 5aaa8c5f342..4d55a7a26e9 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -23,59 +23,6 @@ #include <linux/platform_device.h> #include <mach/common.h> -struct platform_device *__init imx_add_platform_device_dmamask( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask) -{ - int ret = -ENOMEM; - struct platform_device *pdev; - - pdev = platform_device_alloc(name, id); - if (!pdev) - goto err; - - if (dmamask) { - /* - * This memory isn't freed when the device is put, - * I don't have a nice idea for that though. Conceptually - * dma_mask in struct device should not be a pointer. - * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 - */ - pdev->dev.dma_mask = - kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) - /* ret is still -ENOMEM; */ - goto err; - - *pdev->dev.dma_mask = dmamask; - pdev->dev.coherent_dma_mask = dmamask; - } - - if (res) { - ret = platform_device_add_resources(pdev, res, num_resources); - if (ret) - goto err; - } - - if (data) { - ret = platform_device_add_data(pdev, data, size_data); - if (ret) - goto err; - } - - ret = platform_device_add(pdev); - if (ret) { -err: - if (dmamask) - kfree(pdev->dev.dma_mask); - platform_device_put(pdev); - return ERR_PTR(ret); - } - - return pdev; -} - struct device mxc_aips_bus = { .init_name = "mxc_aips", .parent = &platform_bus, diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index a3045937fc2..72986013c1f 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -12,43 +12,17 @@ */ #include <mach/hardware.h> -#ifdef CONFIG_SOC_IMX1 +#ifdef CONFIG_DEBUG_IMX1_UART #define UART_PADDR MX1_UART1_BASE_ADDR -#endif - -#ifdef CONFIG_SOC_IMX25 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX25_UART) #define UART_PADDR MX25_UART1_BASE_ADDR -#endif - -#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27) -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) #define UART_PADDR MX2x_UART1_BASE_ADDR -#endif - -#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35) -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) #define UART_PADDR MX3x_UART1_BASE_ADDR -#endif - -#ifdef CONFIG_SOC_IMX51 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX51_UART) #define UART_PADDR MX51_UART1_BASE_ADDR -#endif - -/* iMX50/53 have same addresses, but not iMX51 */ -#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif +#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #define UART_PADDR MX53_UART1_BASE_ADDR #endif diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 117a381fe3d..def9ba53e23 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -14,10 +14,22 @@ extern struct device mxc_aips_bus; extern struct device mxc_ahb_bus; -struct platform_device *imx_add_platform_device_dmamask( +static inline struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask); + const void *data, size_t size_data, u64 dmamask) +{ + struct platform_device_info pdevinfo = { + .name = name, + .id = id, + .res = res, + .num_res = num_resources, + .data = data, + .size_data = size_data, + .dma_mask = dmamask, + }; + return platform_device_register_full(&pdevinfo); +} static inline struct platform_device *imx_add_platform_device( const char *name, int id, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 44af0064ba1..40a8c178f10 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -1,32 +1 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_GPIO_H__ -#define __ASM_ARCH_MXC_GPIO_H__ - -#include <linux/spinlock.h> -#include <mach/hardware.h> -#include <asm-generic/gpio.h> - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif +/* empty */ diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h index 4a5dc5c6d8e..375cdd0cf87 100644 --- a/arch/arm/plat-mxc/include/mach/i2c.h +++ b/arch/arm/plat-mxc/include/mach/i2c.h @@ -11,14 +11,10 @@ /** * struct imxi2c_platform_data - structure of platform data for MXC I2C driver - * @init: Initialise gpio's and other board specific things - * @exit: Free everything initialised by @init * @bitrate: Bus speed measured in Hz * **/ struct imxi2c_platform_data { - int (*init)(struct device *dev); - void (*exit)(struct device *dev); int bitrate; }; diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 35e0df224ca..2fa3b543010 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -90,11 +90,11 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_HYS (1 << 8) #define PAD_CTL_PKE (1 << 7) -#define PAD_CTL_PUE (1 << 6) -#define PAD_CTL_PUS_100K_DOWN (0 << 4) -#define PAD_CTL_PUS_47K_UP (1 << 4) -#define PAD_CTL_PUS_100K_UP (2 << 4) -#define PAD_CTL_PUS_22K_UP (3 << 4) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) #define PAD_CTL_ODE (1 << 3) diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 1dc1c522601..6265357284d 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -24,10 +24,6 @@ #ifndef __MACH_MX27_H__ #define __MACH_MX27_H__ -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif - #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_SIZE SZ_1M #define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) @@ -131,16 +127,6 @@ #define MX27_IO_P2V(x) IMX_IO_P2V(x) #define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) -#ifndef __ASSEMBLER__ -static inline void mx27_setup_weimcs(size_t cs, - unsigned upper, unsigned lower, unsigned addional) -{ - __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs))); - __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs))); - __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs))); -} -#endif - /* fixed interrupt numbers */ #define MX27_INT_I2C2 1 #define MX27_INT_GPT6 2 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 79e7fc01bb5..e27619e442c 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,10 +1,6 @@ #ifndef __MACH_MX31_H__ #define __MACH_MX31_H__ -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif - /* * IRAM */ @@ -122,16 +118,6 @@ #define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) -#ifndef __ASSEMBLER__ -static inline void mx31_setup_weimcs(size_t cs, - unsigned upper, unsigned lower, unsigned addional) -{ - __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); - __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); - __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); -} -#endif - #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index ce659015535..bca4914b4b9 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -15,10 +15,16 @@ if PLAT_NOMADIK config HAS_MTU bool - select HAVE_SCHED_CLOCK help Support for Multi Timer Unit. MTU provides access to multiple interrupt generating programmable 32-bit free running decrementing counters. +config NOMADIK_MTU_SCHED_CLOCK + bool + depends on HAS_MTU + select HAVE_SCHED_CLOCK + help + Use the Multi Timer Unit as the sched_clock. + endif diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h index d5d7e651269..9605bf227df 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h @@ -9,20 +9,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_GPIO_H -#define __ASM_PLAT_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#ifndef __PLAT_NOMADIK_GPIO +#define __PLAT_NOMADIK_GPIO /* * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving @@ -78,6 +67,9 @@ extern int nmk_gpio_get_mode(int gpio); extern void nmk_gpio_wakeups_suspend(void); extern void nmk_gpio_wakeups_resume(void); +extern void nmk_gpio_clocks_enable(void); +extern void nmk_gpio_clocks_disable(void); + extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); /* @@ -93,4 +85,4 @@ struct nmk_gpio_platform_data { bool supports_sleepmode; }; -#endif /* __ASM_PLAT_GPIO_H */ +#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h index 65704a3d424..6508e7694a4 100644 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -1,54 +1,11 @@ #ifndef __PLAT_MTU_H #define __PLAT_MTU_H -/* - * Guaranteed runtime conversion range in seconds for - * the clocksource and clockevent. - */ -#define MTU_MIN_RANGE 4 - /* should be set by the platform code */ extern void __iomem *mtu_base; -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC +void nmdk_clkevt_reset(void); +void nmdk_clksrc_reset(void); #endif /* __PLAT_MTU_H */ diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 05a3936ae6d..22cb97d2d8a 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -37,7 +37,6 @@ * SLPM value = same as normal * * PIN_CFG - default config with alternate function - * PIN_CFG_PULL - default config with alternate function and pull up/down */ typedef unsigned long pin_cfg_t; @@ -133,10 +132,6 @@ typedef unsigned long pin_cfg_t; (PIN_CFG_DEFAULT |\ (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) -#define PIN_CFG_PULL(num, alt, pull) \ - ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ - (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) - extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); extern int nmk_config_pins(pin_cfg_t *cfgs, int num); extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ef74e157a9d..30b6433d910 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -21,10 +21,59 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/mtu.h> +/* + * Guaranteed runtime conversion range in seconds for + * the clocksource and clockevent. + */ +#define MTU_MIN_RANGE 4 + +/* + * The MTU device hosts four different counters, with 4 set of + * registers. These are register names. + */ + +#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ +#define MTU_RIS 0x04 /* Raw interrupt status */ +#define MTU_MIS 0x08 /* Masked interrupt status */ +#define MTU_ICR 0x0C /* Interrupt clear register */ + +/* per-timer registers take 0..3 as argument */ +#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ +#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ +#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ +#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ + +/* bits for the control register */ +#define MTU_CRn_ENA 0x80 +#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ +#define MTU_CRn_PRESCALE_MASK 0x0c +#define MTU_CRn_PRESCALE_1 0x00 +#define MTU_CRn_PRESCALE_16 0x04 +#define MTU_CRn_PRESCALE_256 0x08 +#define MTU_CRn_32BITS 0x02 +#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ + +/* Other registers are usual amba/primecell registers, currently not used */ +#define MTU_ITCR 0xff0 +#define MTU_ITOP 0xff4 + +#define MTU_PERIPH_ID0 0xfe0 +#define MTU_PERIPH_ID1 0xfe4 +#define MTU_PERIPH_ID2 0xfe8 +#define MTU_PERIPH_ID3 0xfeC + +#define MTU_PCELL0 0xff0 +#define MTU_PCELL1 0xff4 +#define MTU_PCELL2 0xff8 +#define MTU_PCELL3 0xffC + +static bool clkevt_periodic; +static u32 clk_prescale; +static u32 nmdk_cycle; /* write-once */ void __iomem *mtu_base; /* Assigned by machine code */ +#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some @@ -48,32 +97,56 @@ static void notrace nomadik_update_sched_clock(void) u32 cyc = -readl(mtu_base + MTU_VAL(0)); update_sched_clock(&cd, cyc, (u32)~0); } +#endif /* Clockevent device: use one-shot mode */ +static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) +{ + writel(1 << 1, mtu_base + MTU_IMSC); + writel(evt, mtu_base + MTU_LR(1)); + /* Load highest value, enable device, enable interrupts */ + writel(MTU_CRn_ONESHOT | clk_prescale | + MTU_CRn_32BITS | MTU_CRn_ENA, + mtu_base + MTU_CR(1)); + + return 0; +} + +void nmdk_clkevt_reset(void) +{ + if (clkevt_periodic) { + + /* Timer: configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(1)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); + + writel(MTU_CRn_PERIODIC | clk_prescale | + MTU_CRn_32BITS | MTU_CRn_ENA, + mtu_base + MTU_CR(1)); + writel(1 << 1, mtu_base + MTU_IMSC); + } else { + /* Generate an interrupt to start the clockevent again */ + (void) nmdk_clkevt_next(nmdk_cycle, NULL); + } +} + static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { - u32 cr; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - pr_err("%s: periodic mode not supported\n", __func__); + clkevt_periodic = true; + nmdk_clkevt_reset(); break; case CLOCK_EVT_MODE_ONESHOT: - /* Load highest value, enable device, enable interrupts */ - cr = readl(mtu_base + MTU_CR(1)); - writel(0, mtu_base + MTU_LR(1)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(1 << 1, mtu_base + MTU_IMSC); + clkevt_periodic = false; break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - /* disable irq */ writel(0, mtu_base + MTU_IMSC); /* disable timer */ - cr = readl(mtu_base + MTU_CR(1)); - cr &= ~MTU_CRn_ENA; - writel(cr, mtu_base + MTU_CR(1)); + writel(0, mtu_base + MTU_CR(1)); /* load some high default value */ writel(0xffffffff, mtu_base + MTU_LR(1)); break; @@ -82,16 +155,9 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } -static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) -{ - /* writing the value has immediate effect */ - writel(evt, mtu_base + MTU_LR(1)); - return 0; -} - static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", - .features = CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, @@ -116,11 +182,23 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; +void nmdk_clksrc_reset(void) +{ + /* Disable */ + writel(0, mtu_base + MTU_CR(0)); + + /* ClockSource: configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(0)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); + + writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, + mtu_base + MTU_CR(0)); +} + void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - u32 cr = MTU_CRn_32BITS; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); @@ -138,30 +216,28 @@ void __init nmdk_timer_init(void) rate = clk_get_rate(clk0); if (rate > 32000000) { rate /= 16; - cr |= MTU_CRn_PRESCALE_16; + clk_prescale = MTU_CRn_PRESCALE_16; } else { - cr |= MTU_CRn_PRESCALE_1; + clk_prescale = MTU_CRn_PRESCALE_1; } + nmdk_cycle = (rate + HZ/2) / HZ; + + /* Timer 0 is the free running clocksource */ - writel(cr, mtu_base + MTU_CR(0)); - writel(0, mtu_base + MTU_LR(0)); - writel(0, mtu_base + MTU_BGLR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); + nmdk_clksrc_reset(); if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0", rate, 200, 32, clocksource_mmio_readl_down)) pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); - +#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate); - +#endif /* Timer 1 is used for events */ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); - writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ - nmdk_clkevt.max_delta_ns = clockevent_delta2ns(0xffffffff, &nmdk_clkevt); nmdk_clkevt.min_delta_ns = diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 95732af7b20..aa59f4247dc 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,7 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select HAVE_IDE select NEED_MACH_MEMORY_H help "Systems based on omap7xx, omap15xx or omap16xx" @@ -133,18 +134,6 @@ config OMAP_MBOX_KFIFO_SIZE This can also be changed at runtime (via the mbox_kfifo_size module parameter). -config OMAP_IOMMU - tristate - -config OMAP_IOMMU_DEBUG - tristate "Export OMAP IOMMU internals in DebugFS" - depends on OMAP_IOMMU && DEBUG_FS - help - Select this to see extensive information about - the internal state of OMAP IOMMU in debugfs. - - Say N unless you know you need this. - config OMAP_IOMMU_IVA2 bool diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index f0233e6abcd..985262242f2 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -18,8 +18,6 @@ obj-$(CONFIG_ARCH_OMAP3) += omap_device.o obj-$(CONFIG_ARCH_OMAP4) += omap_device.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o -obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o -obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 923c9621096..caa1f7b6cc2 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,7 +18,6 @@ #include <mach/hardware.h> #include <plat/board.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index fc05b102260..61a1ec2a6af 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> @@ -19,7 +19,6 @@ #include <asm/mach-types.h> #include <plat/fpga.h> -#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index bd9a06b3ee8..19719329a47 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -8,7 +8,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -24,45 +24,9 @@ #include <plat/tc.h> #include <plat/board.h> #include <plat/mmc.h> -#include <mach/gpio.h> #include <plat/menelaus.h> #include <plat/omap44xx.h> -#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ - defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) - -static struct resource mcpdm_resources[] = { - { - .name = "mcpdm_mem", - .start = OMAP44XX_MCPDM_BASE, - .end = OMAP44XX_MCPDM_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .name = "mcpdm_irq", - .start = OMAP44XX_IRQ_MCPDM, - .end = OMAP44XX_IRQ_MCPDM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_mcpdm_device = { - .name = "omap-mcpdm", - .id = -1, - .num_resources = ARRAY_SIZE(mcpdm_resources), - .resource = mcpdm_resources, -}; - -static void omap_init_mcpdm(void) -{ - (void) platform_device_register(&omap_mcpdm_device); -} -#else -static inline void omap_init_mcpdm(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) @@ -245,7 +209,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_rng(); - omap_init_mcpdm(); omap_init_uwire(); return 0; } diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index de7896fd9b3..2def4e1990e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -723,7 +723,7 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, - .remove = omap_dm_timer_remove, + .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", }, diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c20beb8ed38..679cbd49c01 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -108,6 +108,22 @@ static inline int omap1_i2c_add_bus(int bus_id) res[1].start = INT_I2C; pdata = &i2c_pdata[bus_id - 1]; + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + return platform_device_register(pdev); } @@ -130,6 +146,7 @@ static inline int omap2_i2c_add_bus(int bus_id) struct platform_device *pdev; char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; struct omap_i2c_bus_platform_data *pdata; + struct omap_i2c_dev_attr *dev_attr; omap2_i2c_mux_pins(bus_id); @@ -144,6 +161,16 @@ static inline int omap2_i2c_add_bus(int bus_id) pdata = &i2c_pdata[bus_id - 1]; /* + * pass the hwmod class's CPU-specific knowledge of I2C IP revision in + * use, and functionality implementation flags, up to the OMAP I2C + * driver via platform data + */ + pdata->rev = oh->class->rev; + + dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; + pdata->flags = dev_attr->flags; + + /* * When waiting for completion of a i2c transfer, we need to * set a wake up latency constraint for the MPU. This is to * ensure quick enough wakeup from idle, when transfer diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index abda2c7e499..c50df4814f6 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -50,10 +50,13 @@ void omap2430_init_early(void); void omap3430_init_early(void); void omap35xx_init_early(void); void omap3630_init_early(void); +void omap3_init_early(void); /* Do not use this one */ void am35xx_init_early(void); void ti816x_init_early(void); void omap4430_init_early(void); +void omap_sram_init(void); + /* * IO bases for various OMAP processors * Except the tap base, rest all the io bases @@ -62,13 +65,13 @@ void omap4430_init_early(void); struct omap_globals { u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ - unsigned long sdrc; /* SDRAM Controller */ - unsigned long sms; /* SDRAM Memory Scheduler */ - unsigned long ctrl; /* System Control Module */ - unsigned long ctrl_pad; /* PAD Control Module */ - unsigned long prm; /* Power and Reset Management */ - unsigned long cm; /* Clock Management */ - unsigned long cm2; + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *ctrl_pad; /* PAD Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 91e8de3db08..9e86ee0aed0 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -222,26 +222,6 @@ extern void omap_gpio_restore_context(void); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { int tmp; diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 7471521c973..7f2969eadb8 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -247,6 +247,8 @@ * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ +void omap_ioremap_init(void); + extern u8 omap_readb(u32 pa); extern u16 omap_readw(u32 pa); extern u32 omap_readl(u32 pa); @@ -256,8 +258,31 @@ extern void omap_writel(u32 v, u32 pa); struct omap_sdrc_params; -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +void omap7xx_map_io(void); +#else +static inline void omap_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP15XX +void omap15xx_map_io(void); +#else +static inline void omap15xx_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +void omap16xx_map_io(void); +#else +static inline void omap16xx_map_io(void) +{ +} +#endif + +void omap1_init_early(void); #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 174f1b9c8c0..a1d79ee1925 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -25,16 +25,17 @@ struct iotlb_entry { }; }; -struct iommu { +struct omap_iommu { const char *name; struct module *owner; struct clk *clk; void __iomem *regbase; struct device *dev; void *isr_priv; + struct iommu_domain *domain; unsigned int refcount; - struct mutex iommu_lock; /* global for this whole object */ + spinlock_t iommu_lock; /* global for this whole object */ /* * We don't change iopgd for a situation like pgd for a task, @@ -48,8 +49,6 @@ struct iommu { struct list_head mmap; struct mutex mmap_lock; /* protect mmap */ - int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv); - void *ctx; /* iommu context: registres saved area */ u32 da_start; u32 da_end; @@ -81,25 +80,27 @@ struct iotlb_lock { struct iommu_functions { unsigned long version; - int (*enable)(struct iommu *obj); - void (*disable)(struct iommu *obj); - void (*set_twl)(struct iommu *obj, bool on); - u32 (*fault_isr)(struct iommu *obj, u32 *ra); + int (*enable)(struct omap_iommu *obj); + void (*disable)(struct omap_iommu *obj); + void (*set_twl)(struct omap_iommu *obj, bool on); + u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra); - void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); + void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr); + void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr); - struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); + struct cr_regs *(*alloc_cr)(struct omap_iommu *obj, + struct iotlb_entry *e); int (*cr_valid)(struct cr_regs *cr); u32 (*cr_to_virt)(struct cr_regs *cr); void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); + ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr, + char *buf); u32 (*get_pte_attr)(struct iotlb_entry *e); - void (*save_ctx)(struct iommu *obj); - void (*restore_ctx)(struct iommu *obj); - ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len); + void (*save_ctx)(struct omap_iommu *obj); + void (*restore_ctx)(struct omap_iommu *obj); + ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); }; struct iommu_platform_data { @@ -150,40 +151,31 @@ struct iommu_platform_data { /* * global functions */ -extern u32 iommu_arch_version(void); - -extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); -extern u32 iotlb_cr_to_virt(struct cr_regs *cr); - -extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); -extern void iommu_set_twl(struct iommu *obj, bool on); -extern void flush_iotlb_page(struct iommu *obj, u32 da); -extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); -extern void flush_iotlb_all(struct iommu *obj); - -extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); -extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, - u32 **ppte); -extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); - -extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end); -extern struct iommu *iommu_get(const char *name); -extern void iommu_put(struct iommu *obj); -extern int iommu_set_isr(const char *name, - int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, +extern u32 omap_iommu_arch_version(void); + +extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); + +extern int +omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e); + +extern int omap_iommu_set_isr(const char *name, + int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs, void *priv), void *isr_priv); -extern void iommu_save_ctx(struct iommu *obj); -extern void iommu_restore_ctx(struct iommu *obj); +extern void omap_iommu_save_ctx(struct omap_iommu *obj); +extern void omap_iommu_restore_ctx(struct omap_iommu *obj); -extern int install_iommu_arch(const struct iommu_functions *ops); -extern void uninstall_iommu_arch(const struct iommu_functions *ops); +extern int omap_install_iommu_arch(const struct iommu_functions *ops); +extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); -extern int foreach_iommu_device(void *data, +extern int omap_foreach_iommu_device(void *data, int (*fn)(struct device *, void *)); -extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len); -extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len); +extern ssize_t +omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); +extern size_t +omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); +struct device *omap_find_iommu_device(const char *name); #endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h index 10ad05f410e..d4116b595e4 100644 --- a/arch/arm/plat-omap/include/plat/iommu2.h +++ b/arch/arm/plat-omap/include/plat/iommu2.h @@ -83,12 +83,12 @@ /* * register accessors */ -static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) +static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs) { return __raw_readl(obj->regbase + offs); } -static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) +static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs) { __raw_writel(val, obj->regbase + offs); } diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h index c3e93bb0911..66a813977d5 100644 --- a/arch/arm/plat-omap/iopgtable.h +++ b/arch/arm/plat-omap/include/plat/iopgtable.h @@ -56,6 +56,19 @@ #define IOPAGE_MASK IOPTE_MASK +/** + * omap_iommu_translate() - va to pa translation + * @d: omap iommu descriptor + * @va: virtual address + * @mask: omap iommu descriptor mask + * + * va to pa translation + */ +static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask) +{ + return (d & mask) | (va & (~mask)); +} + /* * some descriptor attributes. */ @@ -64,10 +77,15 @@ #define IOPGD_SUPER (1 << 18 | 2 << 0) #define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) +#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION) +#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER) #define IOPTE_SMALL (2 << 0) #define IOPTE_LARGE (1 << 0) +#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL) +#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE) + /* to find an entry in a page-table-directory */ #define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) #define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) @@ -97,6 +115,6 @@ static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, } #define to_iommu(dev) \ - (struct iommu *)platform_get_drvdata(to_platform_device(dev)) + (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) #endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index e992b9655fb..6af1a91c0f3 100644 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h @@ -13,8 +13,10 @@ #ifndef __IOMMU_MMAP_H #define __IOMMU_MMAP_H +#include <linux/iommu.h> + struct iovm_struct { - struct iommu *iommu; /* iommu object which this belongs to */ + struct omap_iommu *iommu; /* iommu object which this belongs to */ u32 da_start; /* area definition */ u32 da_end; u32 flags; /* IOVMF_: see below */ @@ -70,20 +72,18 @@ struct iovm_struct { #define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) -extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); -extern u32 iommu_vmap(struct iommu *obj, u32 da, +extern struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da); +extern u32 +omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da, const struct sg_table *sgt, u32 flags); -extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); -extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_vfree(struct iommu *obj, const u32 da); -extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, - u32 flags); -extern void iommu_kunmap(struct iommu *obj, u32 da); -extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_kfree(struct iommu *obj, u32 da); - -extern void *da_to_va(struct iommu *obj, u32 da); +extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, + struct omap_iommu *obj, u32 da); +extern u32 +omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj, + u32 da, size_t bytes, u32 flags); +extern void +omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj, + const u32 da); +extern void *omap_da_to_va(struct omap_iommu *obj, u32 da); #endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index c7b874186c2..94cf70afb23 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -31,7 +31,24 @@ #define OMAP_MMC_MAX_SLOTS 2 -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1) +/* + * struct omap_mmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) struct omap_mmc_dev_attr { u8 flags; diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index e9b0e23edd0..333871f5999 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -24,11 +24,16 @@ #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) +static int initialized; + /* * Intercept ioremap() requests for addresses in our fixed mapping regions. */ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) { + + WARN(!initialized, "Do not use ioremap before init_early\n"); + #ifdef CONFIG_ARCH_OMAP1 if (cpu_class_is_omap1()) { if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) @@ -147,3 +152,8 @@ void __init omap_init_consistent_dma_size(void) init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); #endif } + +void __init omap_ioremap_init(void) +{ + initialized++; +} diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c deleted file mode 100644 index f07cf2f08e0..00000000000 --- a/arch/arm/plat-omap/iommu-debug.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * omap iommu: debugfs interface - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <linux/platform_device.h> -#include <linux/debugfs.h> - -#include <plat/iommu.h> -#include <plat/iovmm.h> - -#include "iopgtable.h" - -#define MAXCOLUMN 100 /* for short messages */ - -static DEFINE_MUTEX(iommu_debug_lock); - -static struct dentry *iommu_debug_root; - -static ssize_t debug_read_ver(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - u32 ver = iommu_arch_version(); - char buf[MAXCOLUMN], *p = buf; - - p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf); - - return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); -} - -static ssize_t debug_read_regs(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - char *p, *buf; - ssize_t bytes; - - buf = kmalloc(count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - mutex_lock(&iommu_debug_lock); - - bytes = iommu_dump_ctx(obj, p, count); - bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes); - - mutex_unlock(&iommu_debug_lock); - kfree(buf); - - return bytes; -} - -static ssize_t debug_read_tlb(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - char *p, *buf; - ssize_t bytes, rest; - - buf = kmalloc(count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - mutex_lock(&iommu_debug_lock); - - p += sprintf(p, "%8s %8s\n", "cam:", "ram:"); - p += sprintf(p, "-----------------------------------------\n"); - rest = count - (p - buf); - p += dump_tlb_entries(obj, p, rest); - - bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); - - mutex_unlock(&iommu_debug_lock); - kfree(buf); - - return bytes; -} - -static ssize_t debug_write_pagetable(struct file *file, - const char __user *userbuf, size_t count, loff_t *ppos) -{ - struct iotlb_entry e; - struct cr_regs cr; - int err; - struct iommu *obj = file->private_data; - char buf[MAXCOLUMN], *p = buf; - - count = min(count, sizeof(buf)); - - mutex_lock(&iommu_debug_lock); - if (copy_from_user(p, userbuf, count)) { - mutex_unlock(&iommu_debug_lock); - return -EFAULT; - } - - sscanf(p, "%x %x", &cr.cam, &cr.ram); - if (!cr.cam || !cr.ram) { - mutex_unlock(&iommu_debug_lock); - return -EINVAL; - } - - iotlb_cr_to_e(&cr, &e); - err = iopgtable_store_entry(obj, &e); - if (err) - dev_err(obj->dev, "%s: fail to store cr\n", __func__); - - mutex_unlock(&iommu_debug_lock); - return count; -} - -#define dump_ioptable_entry_one(lv, da, val) \ - ({ \ - int __err = 0; \ - ssize_t bytes; \ - const int maxcol = 22; \ - const char *str = "%d: %08x %08x\n"; \ - bytes = snprintf(p, maxcol, str, lv, da, val); \ - p += bytes; \ - len -= bytes; \ - if (len < maxcol) \ - __err = -ENOMEM; \ - __err; \ - }) - -static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len) -{ - int i; - u32 *iopgd; - char *p = buf; - - spin_lock(&obj->page_table_lock); - - iopgd = iopgd_offset(obj, 0); - for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) { - int j, err; - u32 *iopte; - u32 da; - - if (!*iopgd) - continue; - - if (!(*iopgd & IOPGD_TABLE)) { - da = i << IOPGD_SHIFT; - - err = dump_ioptable_entry_one(1, da, *iopgd); - if (err) - goto out; - continue; - } - - iopte = iopte_offset(iopgd, 0); - - for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) { - if (!*iopte) - continue; - - da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT); - err = dump_ioptable_entry_one(2, da, *iopgd); - if (err) - goto out; - } - } -out: - spin_unlock(&obj->page_table_lock); - - return p - buf; -} - -static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - char *p, *buf; - size_t bytes; - - buf = (char *)__get_free_page(GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - p += sprintf(p, "L: %8s %8s\n", "da:", "pa:"); - p += sprintf(p, "-----------------------------------------\n"); - - mutex_lock(&iommu_debug_lock); - - bytes = PAGE_SIZE - (p - buf); - p += dump_ioptable(obj, p, bytes); - - bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); - - mutex_unlock(&iommu_debug_lock); - free_page((unsigned long)buf); - - return bytes; -} - -static ssize_t debug_read_mmap(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - char *p, *buf; - struct iovm_struct *tmp; - int uninitialized_var(i); - ssize_t bytes; - - buf = (char *)__get_free_page(GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n", - "No", "start", "end", "size", "flags"); - p += sprintf(p, "-------------------------------------------------\n"); - - mutex_lock(&iommu_debug_lock); - - list_for_each_entry(tmp, &obj->mmap, list) { - size_t len; - const char *str = "%3d %08x-%08x %6x %8x\n"; - const int maxcol = 39; - - len = tmp->da_end - tmp->da_start; - p += snprintf(p, maxcol, str, - i, tmp->da_start, tmp->da_end, len, tmp->flags); - - if (PAGE_SIZE - (p - buf) < maxcol) - break; - i++; - } - - bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); - - mutex_unlock(&iommu_debug_lock); - free_page((unsigned long)buf); - - return bytes; -} - -static ssize_t debug_read_mem(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - char *p, *buf; - struct iovm_struct *area; - ssize_t bytes; - - count = min_t(ssize_t, count, PAGE_SIZE); - - buf = (char *)__get_free_page(GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - mutex_lock(&iommu_debug_lock); - - area = find_iovm_area(obj, (u32)ppos); - if (IS_ERR(area)) { - bytes = -EINVAL; - goto err_out; - } - memcpy(p, area->va, count); - p += count; - - bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); -err_out: - mutex_unlock(&iommu_debug_lock); - free_page((unsigned long)buf); - - return bytes; -} - -static ssize_t debug_write_mem(struct file *file, const char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct iommu *obj = file->private_data; - struct iovm_struct *area; - char *p, *buf; - - count = min_t(size_t, count, PAGE_SIZE); - - buf = (char *)__get_free_page(GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - mutex_lock(&iommu_debug_lock); - - if (copy_from_user(p, userbuf, count)) { - count = -EFAULT; - goto err_out; - } - - area = find_iovm_area(obj, (u32)ppos); - if (IS_ERR(area)) { - count = -EINVAL; - goto err_out; - } - memcpy(area->va, p, count); -err_out: - mutex_unlock(&iommu_debug_lock); - free_page((unsigned long)buf); - - return count; -} - -static int debug_open_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -#define DEBUG_FOPS(name) \ - static const struct file_operations debug_##name##_fops = { \ - .open = debug_open_generic, \ - .read = debug_read_##name, \ - .write = debug_write_##name, \ - .llseek = generic_file_llseek, \ - }; - -#define DEBUG_FOPS_RO(name) \ - static const struct file_operations debug_##name##_fops = { \ - .open = debug_open_generic, \ - .read = debug_read_##name, \ - .llseek = generic_file_llseek, \ - }; - -DEBUG_FOPS_RO(ver); -DEBUG_FOPS_RO(regs); -DEBUG_FOPS_RO(tlb); -DEBUG_FOPS(pagetable); -DEBUG_FOPS_RO(mmap); -DEBUG_FOPS(mem); - -#define __DEBUG_ADD_FILE(attr, mode) \ - { \ - struct dentry *dent; \ - dent = debugfs_create_file(#attr, mode, parent, \ - obj, &debug_##attr##_fops); \ - if (!dent) \ - return -ENOMEM; \ - } - -#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600) -#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400) - -static int iommu_debug_register(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct iommu *obj = platform_get_drvdata(pdev); - struct dentry *d, *parent; - - if (!obj || !obj->dev) - return -EINVAL; - - d = debugfs_create_dir(obj->name, iommu_debug_root); - if (!d) - return -ENOMEM; - parent = d; - - d = debugfs_create_u8("nr_tlb_entries", 400, parent, - (u8 *)&obj->nr_tlb_entries); - if (!d) - return -ENOMEM; - - DEBUG_ADD_FILE_RO(ver); - DEBUG_ADD_FILE_RO(regs); - DEBUG_ADD_FILE_RO(tlb); - DEBUG_ADD_FILE(pagetable); - DEBUG_ADD_FILE_RO(mmap); - DEBUG_ADD_FILE(mem); - - return 0; -} - -static int __init iommu_debug_init(void) -{ - struct dentry *d; - int err; - - d = debugfs_create_dir("iommu", NULL); - if (!d) - return -ENOMEM; - iommu_debug_root = d; - - err = foreach_iommu_device(d, iommu_debug_register); - if (err) - goto err_out; - return 0; - -err_out: - debugfs_remove_recursive(iommu_debug_root); - return err; -} -module_init(iommu_debug_init) - -static void __exit iommu_debugfs_exit(void) -{ - debugfs_remove_recursive(iommu_debug_root); -} -module_exit(iommu_debugfs_exit) - -MODULE_DESCRIPTION("omap iommu: debugfs interface"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c deleted file mode 100644 index 34fc31ee908..00000000000 --- a/arch/arm/plat-omap/iommu.c +++ /dev/null @@ -1,1102 +0,0 @@ -/* - * omap iommu: tlb and pagetable primitives - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, - * Paul Mundt and Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/platform_device.h> - -#include <asm/cacheflush.h> - -#include <plat/iommu.h> - -#include "iopgtable.h" - -#define for_each_iotlb_cr(obj, n, __i, cr) \ - for (__i = 0; \ - (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \ - __i++) - -/* accommodate the difference between omap1 and omap2/3 */ -static const struct iommu_functions *arch_iommu; - -static struct platform_driver omap_iommu_driver; -static struct kmem_cache *iopte_cachep; - -/** - * install_iommu_arch - Install archtecure specific iommu functions - * @ops: a pointer to architecture specific iommu functions - * - * There are several kind of iommu algorithm(tlb, pagetable) among - * omap series. This interface installs such an iommu algorighm. - **/ -int install_iommu_arch(const struct iommu_functions *ops) -{ - if (arch_iommu) - return -EBUSY; - - arch_iommu = ops; - return 0; -} -EXPORT_SYMBOL_GPL(install_iommu_arch); - -/** - * uninstall_iommu_arch - Uninstall archtecure specific iommu functions - * @ops: a pointer to architecture specific iommu functions - * - * This interface uninstalls the iommu algorighm installed previously. - **/ -void uninstall_iommu_arch(const struct iommu_functions *ops) -{ - if (arch_iommu != ops) - pr_err("%s: not your arch\n", __func__); - - arch_iommu = NULL; -} -EXPORT_SYMBOL_GPL(uninstall_iommu_arch); - -/** - * iommu_save_ctx - Save registers for pm off-mode support - * @obj: target iommu - **/ -void iommu_save_ctx(struct iommu *obj) -{ - arch_iommu->save_ctx(obj); -} -EXPORT_SYMBOL_GPL(iommu_save_ctx); - -/** - * iommu_restore_ctx - Restore registers for pm off-mode support - * @obj: target iommu - **/ -void iommu_restore_ctx(struct iommu *obj) -{ - arch_iommu->restore_ctx(obj); -} -EXPORT_SYMBOL_GPL(iommu_restore_ctx); - -/** - * iommu_arch_version - Return running iommu arch version - **/ -u32 iommu_arch_version(void) -{ - return arch_iommu->version; -} -EXPORT_SYMBOL_GPL(iommu_arch_version); - -static int iommu_enable(struct iommu *obj) -{ - int err; - - if (!obj) - return -EINVAL; - - if (!arch_iommu) - return -ENODEV; - - clk_enable(obj->clk); - - err = arch_iommu->enable(obj); - - clk_disable(obj->clk); - return err; -} - -static void iommu_disable(struct iommu *obj) -{ - if (!obj) - return; - - clk_enable(obj->clk); - - arch_iommu->disable(obj); - - clk_disable(obj->clk); -} - -/* - * TLB operations - */ -void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) -{ - BUG_ON(!cr || !e); - - arch_iommu->cr_to_e(cr, e); -} -EXPORT_SYMBOL_GPL(iotlb_cr_to_e); - -static inline int iotlb_cr_valid(struct cr_regs *cr) -{ - if (!cr) - return -EINVAL; - - return arch_iommu->cr_valid(cr); -} - -static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj, - struct iotlb_entry *e) -{ - if (!e) - return NULL; - - return arch_iommu->alloc_cr(obj, e); -} - -u32 iotlb_cr_to_virt(struct cr_regs *cr) -{ - return arch_iommu->cr_to_virt(cr); -} -EXPORT_SYMBOL_GPL(iotlb_cr_to_virt); - -static u32 get_iopte_attr(struct iotlb_entry *e) -{ - return arch_iommu->get_pte_attr(e); -} - -static u32 iommu_report_fault(struct iommu *obj, u32 *da) -{ - return arch_iommu->fault_isr(obj, da); -} - -static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l) -{ - u32 val; - - val = iommu_read_reg(obj, MMU_LOCK); - - l->base = MMU_LOCK_BASE(val); - l->vict = MMU_LOCK_VICT(val); - -} - -static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l) -{ - u32 val; - - val = (l->base << MMU_LOCK_BASE_SHIFT); - val |= (l->vict << MMU_LOCK_VICT_SHIFT); - - iommu_write_reg(obj, val, MMU_LOCK); -} - -static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr) -{ - arch_iommu->tlb_read_cr(obj, cr); -} - -static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr) -{ - arch_iommu->tlb_load_cr(obj, cr); - - iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); - iommu_write_reg(obj, 1, MMU_LD_TLB); -} - -/** - * iotlb_dump_cr - Dump an iommu tlb entry into buf - * @obj: target iommu - * @cr: contents of cam and ram register - * @buf: output buffer - **/ -static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, - char *buf) -{ - BUG_ON(!cr || !buf); - - return arch_iommu->dump_cr(obj, cr, buf); -} - -/* only used in iotlb iteration for-loop */ -static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n) -{ - struct cr_regs cr; - struct iotlb_lock l; - - iotlb_lock_get(obj, &l); - l.vict = n; - iotlb_lock_set(obj, &l); - iotlb_read_cr(obj, &cr); - - return cr; -} - -/** - * load_iotlb_entry - Set an iommu tlb entry - * @obj: target iommu - * @e: an iommu tlb entry info - **/ -int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) -{ - int err = 0; - struct iotlb_lock l; - struct cr_regs *cr; - - if (!obj || !obj->nr_tlb_entries || !e) - return -EINVAL; - - clk_enable(obj->clk); - - iotlb_lock_get(obj, &l); - if (l.base == obj->nr_tlb_entries) { - dev_warn(obj->dev, "%s: preserve entries full\n", __func__); - err = -EBUSY; - goto out; - } - if (!e->prsvd) { - int i; - struct cr_regs tmp; - - for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp) - if (!iotlb_cr_valid(&tmp)) - break; - - if (i == obj->nr_tlb_entries) { - dev_dbg(obj->dev, "%s: full: no entry\n", __func__); - err = -EBUSY; - goto out; - } - - iotlb_lock_get(obj, &l); - } else { - l.vict = l.base; - iotlb_lock_set(obj, &l); - } - - cr = iotlb_alloc_cr(obj, e); - if (IS_ERR(cr)) { - clk_disable(obj->clk); - return PTR_ERR(cr); - } - - iotlb_load_cr(obj, cr); - kfree(cr); - - if (e->prsvd) - l.base++; - /* increment victim for next tlb load */ - if (++l.vict == obj->nr_tlb_entries) - l.vict = l.base; - iotlb_lock_set(obj, &l); -out: - clk_disable(obj->clk); - return err; -} -EXPORT_SYMBOL_GPL(load_iotlb_entry); - -/** - * flush_iotlb_page - Clear an iommu tlb entry - * @obj: target iommu - * @da: iommu device virtual address - * - * Clear an iommu tlb entry which includes 'da' address. - **/ -void flush_iotlb_page(struct iommu *obj, u32 da) -{ - int i; - struct cr_regs cr; - - clk_enable(obj->clk); - - for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) { - u32 start; - size_t bytes; - - if (!iotlb_cr_valid(&cr)) - continue; - - start = iotlb_cr_to_virt(&cr); - bytes = iopgsz_to_bytes(cr.cam & 3); - - if ((start <= da) && (da < start + bytes)) { - dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", - __func__, start, da, bytes); - iotlb_load_cr(obj, &cr); - iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); - } - } - clk_disable(obj->clk); - - if (i == obj->nr_tlb_entries) - dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da); -} -EXPORT_SYMBOL_GPL(flush_iotlb_page); - -/** - * flush_iotlb_range - Clear an iommu tlb entries - * @obj: target iommu - * @start: iommu device virtual address(start) - * @end: iommu device virtual address(end) - * - * Clear an iommu tlb entry which includes 'da' address. - **/ -void flush_iotlb_range(struct iommu *obj, u32 start, u32 end) -{ - u32 da = start; - - while (da < end) { - flush_iotlb_page(obj, da); - /* FIXME: Optimize for multiple page size */ - da += IOPTE_SIZE; - } -} -EXPORT_SYMBOL_GPL(flush_iotlb_range); - -/** - * flush_iotlb_all - Clear all iommu tlb entries - * @obj: target iommu - **/ -void flush_iotlb_all(struct iommu *obj) -{ - struct iotlb_lock l; - - clk_enable(obj->clk); - - l.base = 0; - l.vict = 0; - iotlb_lock_set(obj, &l); - - iommu_write_reg(obj, 1, MMU_GFLUSH); - - clk_disable(obj->clk); -} -EXPORT_SYMBOL_GPL(flush_iotlb_all); - -/** - * iommu_set_twl - enable/disable table walking logic - * @obj: target iommu - * @on: enable/disable - * - * Function used to enable/disable TWL. If one wants to work - * exclusively with locked TLB entries and receive notifications - * for TLB miss then call this function to disable TWL. - */ -void iommu_set_twl(struct iommu *obj, bool on) -{ - clk_enable(obj->clk); - arch_iommu->set_twl(obj, on); - clk_disable(obj->clk); -} -EXPORT_SYMBOL_GPL(iommu_set_twl); - -#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE) - -ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes) -{ - if (!obj || !buf) - return -EINVAL; - - clk_enable(obj->clk); - - bytes = arch_iommu->dump_ctx(obj, buf, bytes); - - clk_disable(obj->clk); - - return bytes; -} -EXPORT_SYMBOL_GPL(iommu_dump_ctx); - -static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num) -{ - int i; - struct iotlb_lock saved; - struct cr_regs tmp; - struct cr_regs *p = crs; - - clk_enable(obj->clk); - iotlb_lock_get(obj, &saved); - - for_each_iotlb_cr(obj, num, i, tmp) { - if (!iotlb_cr_valid(&tmp)) - continue; - *p++ = tmp; - } - - iotlb_lock_set(obj, &saved); - clk_disable(obj->clk); - - return p - crs; -} - -/** - * dump_tlb_entries - dump cr arrays to given buffer - * @obj: target iommu - * @buf: output buffer - **/ -size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes) -{ - int i, num; - struct cr_regs *cr; - char *p = buf; - - num = bytes / sizeof(*cr); - num = min(obj->nr_tlb_entries, num); - - cr = kcalloc(num, sizeof(*cr), GFP_KERNEL); - if (!cr) - return 0; - - num = __dump_tlb_entries(obj, cr, num); - for (i = 0; i < num; i++) - p += iotlb_dump_cr(obj, cr + i, p); - kfree(cr); - - return p - buf; -} -EXPORT_SYMBOL_GPL(dump_tlb_entries); - -int foreach_iommu_device(void *data, int (*fn)(struct device *, void *)) -{ - return driver_for_each_device(&omap_iommu_driver.driver, - NULL, data, fn); -} -EXPORT_SYMBOL_GPL(foreach_iommu_device); - -#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */ - -/* - * H/W pagetable operations - */ -static void flush_iopgd_range(u32 *first, u32 *last) -{ - /* FIXME: L2 cache should be taken care of if it exists */ - do { - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd" - : : "r" (first)); - first += L1_CACHE_BYTES / sizeof(*first); - } while (first <= last); -} - -static void flush_iopte_range(u32 *first, u32 *last) -{ - /* FIXME: L2 cache should be taken care of if it exists */ - do { - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte" - : : "r" (first)); - first += L1_CACHE_BYTES / sizeof(*first); - } while (first <= last); -} - -static void iopte_free(u32 *iopte) -{ - /* Note: freed iopte's must be clean ready for re-use */ - kmem_cache_free(iopte_cachep, iopte); -} - -static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da) -{ - u32 *iopte; - - /* a table has already existed */ - if (*iopgd) - goto pte_ready; - - /* - * do the allocation outside the page table lock - */ - spin_unlock(&obj->page_table_lock); - iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL); - spin_lock(&obj->page_table_lock); - - if (!*iopgd) { - if (!iopte) - return ERR_PTR(-ENOMEM); - - *iopgd = virt_to_phys(iopte) | IOPGD_TABLE; - flush_iopgd_range(iopgd, iopgd); - - dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte); - } else { - /* We raced, free the reduniovant table */ - iopte_free(iopte); - } - -pte_ready: - iopte = iopte_offset(iopgd, da); - - dev_vdbg(obj->dev, - "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", - __func__, da, iopgd, *iopgd, iopte, *iopte); - - return iopte; -} - -static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot) -{ - u32 *iopgd = iopgd_offset(obj, da); - - if ((da | pa) & ~IOSECTION_MASK) { - dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", - __func__, da, pa, IOSECTION_SIZE); - return -EINVAL; - } - - *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION; - flush_iopgd_range(iopgd, iopgd); - return 0; -} - -static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot) -{ - u32 *iopgd = iopgd_offset(obj, da); - int i; - - if ((da | pa) & ~IOSUPER_MASK) { - dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", - __func__, da, pa, IOSUPER_SIZE); - return -EINVAL; - } - - for (i = 0; i < 16; i++) - *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER; - flush_iopgd_range(iopgd, iopgd + 15); - return 0; -} - -static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot) -{ - u32 *iopgd = iopgd_offset(obj, da); - u32 *iopte = iopte_alloc(obj, iopgd, da); - - if (IS_ERR(iopte)) - return PTR_ERR(iopte); - - *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL; - flush_iopte_range(iopte, iopte); - - dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n", - __func__, da, pa, iopte, *iopte); - - return 0; -} - -static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot) -{ - u32 *iopgd = iopgd_offset(obj, da); - u32 *iopte = iopte_alloc(obj, iopgd, da); - int i; - - if ((da | pa) & ~IOLARGE_MASK) { - dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", - __func__, da, pa, IOLARGE_SIZE); - return -EINVAL; - } - - if (IS_ERR(iopte)) - return PTR_ERR(iopte); - - for (i = 0; i < 16; i++) - *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE; - flush_iopte_range(iopte, iopte + 15); - return 0; -} - -static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e) -{ - int (*fn)(struct iommu *, u32, u32, u32); - u32 prot; - int err; - - if (!obj || !e) - return -EINVAL; - - switch (e->pgsz) { - case MMU_CAM_PGSZ_16M: - fn = iopgd_alloc_super; - break; - case MMU_CAM_PGSZ_1M: - fn = iopgd_alloc_section; - break; - case MMU_CAM_PGSZ_64K: - fn = iopte_alloc_large; - break; - case MMU_CAM_PGSZ_4K: - fn = iopte_alloc_page; - break; - default: - fn = NULL; - BUG(); - break; - } - - prot = get_iopte_attr(e); - - spin_lock(&obj->page_table_lock); - err = fn(obj, e->da, e->pa, prot); - spin_unlock(&obj->page_table_lock); - - return err; -} - -/** - * iopgtable_store_entry - Make an iommu pte entry - * @obj: target iommu - * @e: an iommu tlb entry info - **/ -int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e) -{ - int err; - - flush_iotlb_page(obj, e->da); - err = iopgtable_store_entry_core(obj, e); -#ifdef PREFETCH_IOTLB - if (!err) - load_iotlb_entry(obj, e); -#endif - return err; -} -EXPORT_SYMBOL_GPL(iopgtable_store_entry); - -/** - * iopgtable_lookup_entry - Lookup an iommu pte entry - * @obj: target iommu - * @da: iommu device virtual address - * @ppgd: iommu pgd entry pointer to be returned - * @ppte: iommu pte entry pointer to be returned - **/ -void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte) -{ - u32 *iopgd, *iopte = NULL; - - iopgd = iopgd_offset(obj, da); - if (!*iopgd) - goto out; - - if (iopgd_is_table(*iopgd)) - iopte = iopte_offset(iopgd, da); -out: - *ppgd = iopgd; - *ppte = iopte; -} -EXPORT_SYMBOL_GPL(iopgtable_lookup_entry); - -static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) -{ - size_t bytes; - u32 *iopgd = iopgd_offset(obj, da); - int nent = 1; - - if (!*iopgd) - return 0; - - if (iopgd_is_table(*iopgd)) { - int i; - u32 *iopte = iopte_offset(iopgd, da); - - bytes = IOPTE_SIZE; - if (*iopte & IOPTE_LARGE) { - nent *= 16; - /* rewind to the 1st entry */ - iopte = iopte_offset(iopgd, (da & IOLARGE_MASK)); - } - bytes *= nent; - memset(iopte, 0, nent * sizeof(*iopte)); - flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte)); - - /* - * do table walk to check if this table is necessary or not - */ - iopte = iopte_offset(iopgd, 0); - for (i = 0; i < PTRS_PER_IOPTE; i++) - if (iopte[i]) - goto out; - - iopte_free(iopte); - nent = 1; /* for the next L1 entry */ - } else { - bytes = IOPGD_SIZE; - if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) { - nent *= 16; - /* rewind to the 1st entry */ - iopgd = iopgd_offset(obj, (da & IOSUPER_MASK)); - } - bytes *= nent; - } - memset(iopgd, 0, nent * sizeof(*iopgd)); - flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd)); -out: - return bytes; -} - -/** - * iopgtable_clear_entry - Remove an iommu pte entry - * @obj: target iommu - * @da: iommu device virtual address - **/ -size_t iopgtable_clear_entry(struct iommu *obj, u32 da) -{ - size_t bytes; - - spin_lock(&obj->page_table_lock); - - bytes = iopgtable_clear_entry_core(obj, da); - flush_iotlb_page(obj, da); - - spin_unlock(&obj->page_table_lock); - - return bytes; -} -EXPORT_SYMBOL_GPL(iopgtable_clear_entry); - -static void iopgtable_clear_entry_all(struct iommu *obj) -{ - int i; - - spin_lock(&obj->page_table_lock); - - for (i = 0; i < PTRS_PER_IOPGD; i++) { - u32 da; - u32 *iopgd; - - da = i << IOPGD_SHIFT; - iopgd = iopgd_offset(obj, da); - - if (!*iopgd) - continue; - - if (iopgd_is_table(*iopgd)) - iopte_free(iopte_offset(iopgd, 0)); - - *iopgd = 0; - flush_iopgd_range(iopgd, iopgd); - } - - flush_iotlb_all(obj); - - spin_unlock(&obj->page_table_lock); -} - -/* - * Device IOMMU generic operations - */ -static irqreturn_t iommu_fault_handler(int irq, void *data) -{ - u32 da, errs; - u32 *iopgd, *iopte; - struct iommu *obj = data; - - if (!obj->refcount) - return IRQ_NONE; - - clk_enable(obj->clk); - errs = iommu_report_fault(obj, &da); - clk_disable(obj->clk); - if (errs == 0) - return IRQ_HANDLED; - - /* Fault callback or TLB/PTE Dynamic loading */ - if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) - return IRQ_HANDLED; - - iommu_disable(obj); - - iopgd = iopgd_offset(obj, da); - - if (!iopgd_is_table(*iopgd)) { - dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p " - "*pgd:px%08x\n", obj->name, errs, da, iopgd, *iopgd); - return IRQ_NONE; - } - - iopte = iopte_offset(iopgd, da); - - dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p *pgd:0x%08x " - "pte:0x%p *pte:0x%08x\n", obj->name, errs, da, iopgd, *iopgd, - iopte, *iopte); - - return IRQ_NONE; -} - -static int device_match_by_alias(struct device *dev, void *data) -{ - struct iommu *obj = to_iommu(dev); - const char *name = data; - - pr_debug("%s: %s %s\n", __func__, obj->name, name); - - return strcmp(obj->name, name) == 0; -} - -/** - * iommu_set_da_range - Set a valid device address range - * @obj: target iommu - * @start Start of valid range - * @end End of valid range - **/ -int iommu_set_da_range(struct iommu *obj, u32 start, u32 end) -{ - - if (!obj) - return -EFAULT; - - if (end < start || !PAGE_ALIGN(start | end)) - return -EINVAL; - - obj->da_start = start; - obj->da_end = end; - - return 0; -} -EXPORT_SYMBOL_GPL(iommu_set_da_range); - -/** - * iommu_get - Get iommu handler - * @name: target iommu name - **/ -struct iommu *iommu_get(const char *name) -{ - int err = -ENOMEM; - struct device *dev; - struct iommu *obj; - - dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, - device_match_by_alias); - if (!dev) - return ERR_PTR(-ENODEV); - - obj = to_iommu(dev); - - mutex_lock(&obj->iommu_lock); - - if (obj->refcount++ == 0) { - err = iommu_enable(obj); - if (err) - goto err_enable; - flush_iotlb_all(obj); - } - - if (!try_module_get(obj->owner)) - goto err_module; - - mutex_unlock(&obj->iommu_lock); - - dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); - return obj; - -err_module: - if (obj->refcount == 1) - iommu_disable(obj); -err_enable: - obj->refcount--; - mutex_unlock(&obj->iommu_lock); - return ERR_PTR(err); -} -EXPORT_SYMBOL_GPL(iommu_get); - -/** - * iommu_put - Put back iommu handler - * @obj: target iommu - **/ -void iommu_put(struct iommu *obj) -{ - if (!obj || IS_ERR(obj)) - return; - - mutex_lock(&obj->iommu_lock); - - if (--obj->refcount == 0) - iommu_disable(obj); - - module_put(obj->owner); - - mutex_unlock(&obj->iommu_lock); - - dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); -} -EXPORT_SYMBOL_GPL(iommu_put); - -int iommu_set_isr(const char *name, - int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, - void *priv), - void *isr_priv) -{ - struct device *dev; - struct iommu *obj; - - dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, - device_match_by_alias); - if (!dev) - return -ENODEV; - - obj = to_iommu(dev); - mutex_lock(&obj->iommu_lock); - if (obj->refcount != 0) { - mutex_unlock(&obj->iommu_lock); - return -EBUSY; - } - obj->isr = isr; - obj->isr_priv = isr_priv; - mutex_unlock(&obj->iommu_lock); - - return 0; -} -EXPORT_SYMBOL_GPL(iommu_set_isr); - -/* - * OMAP Device MMU(IOMMU) detection - */ -static int __devinit omap_iommu_probe(struct platform_device *pdev) -{ - int err = -ENODEV; - void *p; - int irq; - struct iommu *obj; - struct resource *res; - struct iommu_platform_data *pdata = pdev->dev.platform_data; - - if (pdev->num_resources != 2) - return -EINVAL; - - obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL); - if (!obj) - return -ENOMEM; - - obj->clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(obj->clk)) - goto err_clk; - - obj->nr_tlb_entries = pdata->nr_tlb_entries; - obj->name = pdata->name; - obj->dev = &pdev->dev; - obj->ctx = (void *)obj + sizeof(*obj); - obj->da_start = pdata->da_start; - obj->da_end = pdata->da_end; - - mutex_init(&obj->iommu_lock); - mutex_init(&obj->mmap_lock); - spin_lock_init(&obj->page_table_lock); - INIT_LIST_HEAD(&obj->mmap); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - err = -ENODEV; - goto err_mem; - } - - res = request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev)); - if (!res) { - err = -EIO; - goto err_mem; - } - - obj->regbase = ioremap(res->start, resource_size(res)); - if (!obj->regbase) { - err = -ENOMEM; - goto err_ioremap; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - err = -ENODEV; - goto err_irq; - } - err = request_irq(irq, iommu_fault_handler, IRQF_SHARED, - dev_name(&pdev->dev), obj); - if (err < 0) - goto err_irq; - platform_set_drvdata(pdev, obj); - - p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE)); - if (!p) { - err = -ENOMEM; - goto err_pgd; - } - memset(p, 0, IOPGD_TABLE_SIZE); - clean_dcache_area(p, IOPGD_TABLE_SIZE); - obj->iopgd = p; - - BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE)); - - dev_info(&pdev->dev, "%s registered\n", obj->name); - return 0; - -err_pgd: - free_irq(irq, obj); -err_irq: - iounmap(obj->regbase); -err_ioremap: - release_mem_region(res->start, resource_size(res)); -err_mem: - clk_put(obj->clk); -err_clk: - kfree(obj); - return err; -} - -static int __devexit omap_iommu_remove(struct platform_device *pdev) -{ - int irq; - struct resource *res; - struct iommu *obj = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - iopgtable_clear_entry_all(obj); - free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE)); - - irq = platform_get_irq(pdev, 0); - free_irq(irq, obj); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - iounmap(obj->regbase); - - clk_put(obj->clk); - dev_info(&pdev->dev, "%s removed\n", obj->name); - kfree(obj); - return 0; -} - -static struct platform_driver omap_iommu_driver = { - .probe = omap_iommu_probe, - .remove = __devexit_p(omap_iommu_remove), - .driver = { - .name = "omap-iommu", - }, -}; - -static void iopte_cachep_ctor(void *iopte) -{ - clean_dcache_area(iopte, IOPTE_TABLE_SIZE); -} - -static int __init omap_iommu_init(void) -{ - struct kmem_cache *p; - const unsigned long flags = SLAB_HWCACHE_ALIGN; - size_t align = 1 << 10; /* L2 pagetable alignement */ - - p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags, - iopte_cachep_ctor); - if (!p) - return -ENOMEM; - iopte_cachep = p; - - return platform_driver_register(&omap_iommu_driver); -} -module_init(omap_iommu_init); - -static void __exit omap_iommu_exit(void) -{ - kmem_cache_destroy(iopte_cachep); - - platform_driver_unregister(&omap_iommu_driver); -} -module_exit(omap_iommu_exit); - -MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives"); -MODULE_ALIAS("platform:omap-iommu"); -MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c deleted file mode 100644 index 79e7fedb860..00000000000 --- a/arch/arm/plat-omap/iovmm.c +++ /dev/null @@ -1,904 +0,0 @@ -/* - * omap iommu: simple virtual address space management - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/device.h> -#include <linux/scatterlist.h> - -#include <asm/cacheflush.h> -#include <asm/mach/map.h> - -#include <plat/iommu.h> -#include <plat/iovmm.h> - -#include "iopgtable.h" - -/* - * A device driver needs to create address mappings between: - * - * - iommu/device address - * - physical address - * - mpu virtual address - * - * There are 4 possible patterns for them: - * - * |iova/ mapping iommu_ page - * | da pa va (d)-(p)-(v) function type - * --------------------------------------------------------------------------- - * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s - * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s - * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s - * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* - * - * - * 'iova': device iommu virtual address - * 'da': alias of 'iova' - * 'pa': physical address - * 'va': mpu virtual address - * - * 'c': contiguous memory area - * 'd': discontiguous memory area - * 'a': anonymous memory allocation - * '()': optional feature - * - * 'n': a normal page(4KB) size is used. - * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. - * - * '*': not yet, but feasible. - */ - -static struct kmem_cache *iovm_area_cachep; - -/* return total bytes of sg buffers */ -static size_t sgtable_len(const struct sg_table *sgt) -{ - unsigned int i, total = 0; - struct scatterlist *sg; - - if (!sgt) - return 0; - - for_each_sg(sgt->sgl, sg, sgt->nents, i) { - size_t bytes; - - bytes = sg->length; - - if (!iopgsz_ok(bytes)) { - pr_err("%s: sg[%d] not iommu pagesize(%x)\n", - __func__, i, bytes); - return 0; - } - - total += bytes; - } - - return total; -} -#define sgtable_ok(x) (!!sgtable_len(x)) - -static unsigned max_alignment(u32 addr) -{ - int i; - unsigned pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, }; - for (i = 0; i < ARRAY_SIZE(pagesize) && addr & (pagesize[i] - 1); i++) - ; - return (i < ARRAY_SIZE(pagesize)) ? pagesize[i] : 0; -} - -/* - * calculate the optimal number sg elements from total bytes based on - * iommu superpages - */ -static unsigned sgtable_nents(size_t bytes, u32 da, u32 pa) -{ - unsigned nr_entries = 0, ent_sz; - - if (!IS_ALIGNED(bytes, PAGE_SIZE)) { - pr_err("%s: wrong size %08x\n", __func__, bytes); - return 0; - } - - while (bytes) { - ent_sz = max_alignment(da | pa); - ent_sz = min_t(unsigned, ent_sz, iopgsz_max(bytes)); - nr_entries++; - da += ent_sz; - pa += ent_sz; - bytes -= ent_sz; - } - - return nr_entries; -} - -/* allocate and initialize sg_table header(a kind of 'superblock') */ -static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags, - u32 da, u32 pa) -{ - unsigned int nr_entries; - int err; - struct sg_table *sgt; - - if (!bytes) - return ERR_PTR(-EINVAL); - - if (!IS_ALIGNED(bytes, PAGE_SIZE)) - return ERR_PTR(-EINVAL); - - if (flags & IOVMF_LINEAR) { - nr_entries = sgtable_nents(bytes, da, pa); - if (!nr_entries) - return ERR_PTR(-EINVAL); - } else - nr_entries = bytes / PAGE_SIZE; - - sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); - if (!sgt) - return ERR_PTR(-ENOMEM); - - err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL); - if (err) { - kfree(sgt); - return ERR_PTR(err); - } - - pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries); - - return sgt; -} - -/* free sg_table header(a kind of superblock) */ -static void sgtable_free(struct sg_table *sgt) -{ - if (!sgt) - return; - - sg_free_table(sgt); - kfree(sgt); - - pr_debug("%s: sgt:%p\n", __func__, sgt); -} - -/* map 'sglist' to a contiguous mpu virtual area and return 'va' */ -static void *vmap_sg(const struct sg_table *sgt) -{ - u32 va; - size_t total; - unsigned int i; - struct scatterlist *sg; - struct vm_struct *new; - const struct mem_type *mtype; - - mtype = get_mem_type(MT_DEVICE); - if (!mtype) - return ERR_PTR(-EINVAL); - - total = sgtable_len(sgt); - if (!total) - return ERR_PTR(-EINVAL); - - new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END); - if (!new) - return ERR_PTR(-ENOMEM); - va = (u32)new->addr; - - for_each_sg(sgt->sgl, sg, sgt->nents, i) { - size_t bytes; - u32 pa; - int err; - - pa = sg_phys(sg); - bytes = sg->length; - - BUG_ON(bytes != PAGE_SIZE); - - err = ioremap_page(va, pa, mtype); - if (err) - goto err_out; - - va += bytes; - } - - flush_cache_vmap((unsigned long)new->addr, - (unsigned long)(new->addr + total)); - return new->addr; - -err_out: - WARN_ON(1); /* FIXME: cleanup some mpu mappings */ - vunmap(new->addr); - return ERR_PTR(-EAGAIN); -} - -static inline void vunmap_sg(const void *va) -{ - vunmap(va); -} - -static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da) -{ - struct iovm_struct *tmp; - - list_for_each_entry(tmp, &obj->mmap, list) { - if ((da >= tmp->da_start) && (da < tmp->da_end)) { - size_t len; - - len = tmp->da_end - tmp->da_start; - - dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", - __func__, tmp->da_start, da, tmp->da_end, len, - tmp->flags); - - return tmp; - } - } - - return NULL; -} - -/** - * find_iovm_area - find iovma which includes @da - * @da: iommu device virtual address - * - * Find the existing iovma starting at @da - */ -struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da) -{ - struct iovm_struct *area; - - mutex_lock(&obj->mmap_lock); - area = __find_iovm_area(obj, da); - mutex_unlock(&obj->mmap_lock); - - return area; -} -EXPORT_SYMBOL_GPL(find_iovm_area); - -/* - * This finds the hole(area) which fits the requested address and len - * in iovmas mmap, and returns the new allocated iovma. - */ -static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da, - size_t bytes, u32 flags) -{ - struct iovm_struct *new, *tmp; - u32 start, prev_end, alignment; - - if (!obj || !bytes) - return ERR_PTR(-EINVAL); - - start = da; - alignment = PAGE_SIZE; - - if (~flags & IOVMF_DA_FIXED) { - /* Don't map address 0 */ - start = obj->da_start ? obj->da_start : alignment; - - if (flags & IOVMF_LINEAR) - alignment = iopgsz_max(bytes); - start = roundup(start, alignment); - } else if (start < obj->da_start || start > obj->da_end || - obj->da_end - start < bytes) { - return ERR_PTR(-EINVAL); - } - - tmp = NULL; - if (list_empty(&obj->mmap)) - goto found; - - prev_end = 0; - list_for_each_entry(tmp, &obj->mmap, list) { - - if (prev_end > start) - break; - - if (tmp->da_start > start && (tmp->da_start - start) >= bytes) - goto found; - - if (tmp->da_end >= start && ~flags & IOVMF_DA_FIXED) - start = roundup(tmp->da_end + 1, alignment); - - prev_end = tmp->da_end; - } - - if ((start >= prev_end) && (obj->da_end - start >= bytes)) - goto found; - - dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n", - __func__, da, bytes, flags); - - return ERR_PTR(-EINVAL); - -found: - new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL); - if (!new) - return ERR_PTR(-ENOMEM); - - new->iommu = obj; - new->da_start = start; - new->da_end = start + bytes; - new->flags = flags; - - /* - * keep ascending order of iovmas - */ - if (tmp) - list_add_tail(&new->list, &tmp->list); - else - list_add(&new->list, &obj->mmap); - - dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n", - __func__, new->da_start, start, new->da_end, bytes, flags); - - return new; -} - -static void free_iovm_area(struct iommu *obj, struct iovm_struct *area) -{ - size_t bytes; - - BUG_ON(!obj || !area); - - bytes = area->da_end - area->da_start; - - dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n", - __func__, area->da_start, area->da_end, bytes, area->flags); - - list_del(&area->list); - kmem_cache_free(iovm_area_cachep, area); -} - -/** - * da_to_va - convert (d) to (v) - * @obj: objective iommu - * @da: iommu device virtual address - * @va: mpu virtual address - * - * Returns mpu virtual addr which corresponds to a given device virtual addr - */ -void *da_to_va(struct iommu *obj, u32 da) -{ - void *va = NULL; - struct iovm_struct *area; - - mutex_lock(&obj->mmap_lock); - - area = __find_iovm_area(obj, da); - if (!area) { - dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); - goto out; - } - va = area->va; -out: - mutex_unlock(&obj->mmap_lock); - - return va; -} -EXPORT_SYMBOL_GPL(da_to_va); - -static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) -{ - unsigned int i; - struct scatterlist *sg; - void *va = _va; - void *va_end; - - for_each_sg(sgt->sgl, sg, sgt->nents, i) { - struct page *pg; - const size_t bytes = PAGE_SIZE; - - /* - * iommu 'superpage' isn't supported with 'iommu_vmalloc()' - */ - pg = vmalloc_to_page(va); - BUG_ON(!pg); - sg_set_page(sg, pg, bytes, 0); - - va += bytes; - } - - va_end = _va + PAGE_SIZE * i; -} - -static inline void sgtable_drain_vmalloc(struct sg_table *sgt) -{ - /* - * Actually this is not necessary at all, just exists for - * consistency of the code readability. - */ - BUG_ON(!sgt); -} - -static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, - size_t len) -{ - unsigned int i; - struct scatterlist *sg; - - for_each_sg(sgt->sgl, sg, sgt->nents, i) { - unsigned bytes; - - bytes = max_alignment(da | pa); - bytes = min_t(unsigned, bytes, iopgsz_max(len)); - - BUG_ON(!iopgsz_ok(bytes)); - - sg_set_buf(sg, phys_to_virt(pa), bytes); - /* - * 'pa' is cotinuous(linear). - */ - pa += bytes; - da += bytes; - len -= bytes; - } - BUG_ON(len); -} - -static inline void sgtable_drain_kmalloc(struct sg_table *sgt) -{ - /* - * Actually this is not necessary at all, just exists for - * consistency of the code readability - */ - BUG_ON(!sgt); -} - -/* create 'da' <-> 'pa' mapping from 'sgt' */ -static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, - const struct sg_table *sgt, u32 flags) -{ - int err; - unsigned int i, j; - struct scatterlist *sg; - u32 da = new->da_start; - - if (!obj || !sgt) - return -EINVAL; - - BUG_ON(!sgtable_ok(sgt)); - - for_each_sg(sgt->sgl, sg, sgt->nents, i) { - u32 pa; - int pgsz; - size_t bytes; - struct iotlb_entry e; - - pa = sg_phys(sg); - bytes = sg->length; - - flags &= ~IOVMF_PGSZ_MASK; - pgsz = bytes_to_iopgsz(bytes); - if (pgsz < 0) - goto err_out; - flags |= pgsz; - - pr_debug("%s: [%d] %08x %08x(%x)\n", __func__, - i, da, pa, bytes); - - iotlb_init_entry(&e, da, pa, flags); - err = iopgtable_store_entry(obj, &e); - if (err) - goto err_out; - - da += bytes; - } - return 0; - -err_out: - da = new->da_start; - - for_each_sg(sgt->sgl, sg, i, j) { - size_t bytes; - - bytes = iopgtable_clear_entry(obj, da); - - BUG_ON(!iopgsz_ok(bytes)); - - da += bytes; - } - return err; -} - -/* release 'da' <-> 'pa' mapping */ -static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area) -{ - u32 start; - size_t total = area->da_end - area->da_start; - - BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE)); - - start = area->da_start; - while (total > 0) { - size_t bytes; - - bytes = iopgtable_clear_entry(obj, start); - if (bytes == 0) - bytes = PAGE_SIZE; - else - dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n", - __func__, start, bytes, area->flags); - - BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE)); - - total -= bytes; - start += bytes; - } - BUG_ON(total); -} - -/* template function for all unmapping */ -static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da, - void (*fn)(const void *), u32 flags) -{ - struct sg_table *sgt = NULL; - struct iovm_struct *area; - - if (!IS_ALIGNED(da, PAGE_SIZE)) { - dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da); - return NULL; - } - - mutex_lock(&obj->mmap_lock); - - area = __find_iovm_area(obj, da); - if (!area) { - dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); - goto out; - } - - if ((area->flags & flags) != flags) { - dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__, - area->flags); - goto out; - } - sgt = (struct sg_table *)area->sgt; - - unmap_iovm_area(obj, area); - - fn(area->va); - - dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__, - area->da_start, da, area->da_end, - area->da_end - area->da_start, area->flags); - - free_iovm_area(obj, area); -out: - mutex_unlock(&obj->mmap_lock); - - return sgt; -} - -static u32 map_iommu_region(struct iommu *obj, u32 da, - const struct sg_table *sgt, void *va, size_t bytes, u32 flags) -{ - int err = -ENOMEM; - struct iovm_struct *new; - - mutex_lock(&obj->mmap_lock); - - new = alloc_iovm_area(obj, da, bytes, flags); - if (IS_ERR(new)) { - err = PTR_ERR(new); - goto err_alloc_iovma; - } - new->va = va; - new->sgt = sgt; - - if (map_iovm_area(obj, new, sgt, new->flags)) - goto err_map; - - mutex_unlock(&obj->mmap_lock); - - dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n", - __func__, new->da_start, bytes, new->flags, va); - - return new->da_start; - -err_map: - free_iovm_area(obj, new); -err_alloc_iovma: - mutex_unlock(&obj->mmap_lock); - return err; -} - -static inline u32 __iommu_vmap(struct iommu *obj, u32 da, - const struct sg_table *sgt, void *va, size_t bytes, u32 flags) -{ - return map_iommu_region(obj, da, sgt, va, bytes, flags); -} - -/** - * iommu_vmap - (d)-(p)-(v) address mapper - * @obj: objective iommu - * @sgt: address of scatter gather table - * @flags: iovma and page property - * - * Creates 1-n-1 mapping with given @sgt and returns @da. - * All @sgt element must be io page size aligned. - */ -u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, - u32 flags) -{ - size_t bytes; - void *va = NULL; - - if (!obj || !obj->dev || !sgt) - return -EINVAL; - - bytes = sgtable_len(sgt); - if (!bytes) - return -EINVAL; - bytes = PAGE_ALIGN(bytes); - - if (flags & IOVMF_MMIO) { - va = vmap_sg(sgt); - if (IS_ERR(va)) - return PTR_ERR(va); - } - - flags |= IOVMF_DISCONT; - flags |= IOVMF_MMIO; - - da = __iommu_vmap(obj, da, sgt, va, bytes, flags); - if (IS_ERR_VALUE(da)) - vunmap_sg(va); - - return da; -} -EXPORT_SYMBOL_GPL(iommu_vmap); - -/** - * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()' - * @obj: objective iommu - * @da: iommu device virtual address - * - * Free the iommu virtually contiguous memory area starting at - * @da, which was returned by 'iommu_vmap()'. - */ -struct sg_table *iommu_vunmap(struct iommu *obj, u32 da) -{ - struct sg_table *sgt; - /* - * 'sgt' is allocated before 'iommu_vmalloc()' is called. - * Just returns 'sgt' to the caller to free - */ - sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO); - if (!sgt) - dev_dbg(obj->dev, "%s: No sgt\n", __func__); - return sgt; -} -EXPORT_SYMBOL_GPL(iommu_vunmap); - -/** - * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper - * @obj: objective iommu - * @da: contiguous iommu virtual memory - * @bytes: allocation size - * @flags: iovma and page property - * - * Allocate @bytes linearly and creates 1-n-1 mapping and returns - * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set. - */ -u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) -{ - void *va; - struct sg_table *sgt; - - if (!obj || !obj->dev || !bytes) - return -EINVAL; - - bytes = PAGE_ALIGN(bytes); - - va = vmalloc(bytes); - if (!va) - return -ENOMEM; - - flags |= IOVMF_DISCONT; - flags |= IOVMF_ALLOC; - - sgt = sgtable_alloc(bytes, flags, da, 0); - if (IS_ERR(sgt)) { - da = PTR_ERR(sgt); - goto err_sgt_alloc; - } - sgtable_fill_vmalloc(sgt, va); - - da = __iommu_vmap(obj, da, sgt, va, bytes, flags); - if (IS_ERR_VALUE(da)) - goto err_iommu_vmap; - - return da; - -err_iommu_vmap: - sgtable_drain_vmalloc(sgt); - sgtable_free(sgt); -err_sgt_alloc: - vfree(va); - return da; -} -EXPORT_SYMBOL_GPL(iommu_vmalloc); - -/** - * iommu_vfree - release memory allocated by 'iommu_vmalloc()' - * @obj: objective iommu - * @da: iommu device virtual address - * - * Frees the iommu virtually continuous memory area starting at - * @da, as obtained from 'iommu_vmalloc()'. - */ -void iommu_vfree(struct iommu *obj, const u32 da) -{ - struct sg_table *sgt; - - sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC); - if (!sgt) - dev_dbg(obj->dev, "%s: No sgt\n", __func__); - sgtable_free(sgt); -} -EXPORT_SYMBOL_GPL(iommu_vfree); - -static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va, - size_t bytes, u32 flags) -{ - struct sg_table *sgt; - - sgt = sgtable_alloc(bytes, flags, da, pa); - if (IS_ERR(sgt)) - return PTR_ERR(sgt); - - sgtable_fill_kmalloc(sgt, pa, da, bytes); - - da = map_iommu_region(obj, da, sgt, va, bytes, flags); - if (IS_ERR_VALUE(da)) { - sgtable_drain_kmalloc(sgt); - sgtable_free(sgt); - } - - return da; -} - -/** - * iommu_kmap - (d)-(p)-(v) address mapper - * @obj: objective iommu - * @da: contiguous iommu virtual memory - * @pa: contiguous physical memory - * @flags: iovma and page property - * - * Creates 1-1-1 mapping and returns @da again, which can be - * adjusted if 'IOVMF_DA_FIXED' is not set. - */ -u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, - u32 flags) -{ - void *va; - - if (!obj || !obj->dev || !bytes) - return -EINVAL; - - bytes = PAGE_ALIGN(bytes); - - va = ioremap(pa, bytes); - if (!va) - return -ENOMEM; - - flags |= IOVMF_LINEAR; - flags |= IOVMF_MMIO; - - da = __iommu_kmap(obj, da, pa, va, bytes, flags); - if (IS_ERR_VALUE(da)) - iounmap(va); - - return da; -} -EXPORT_SYMBOL_GPL(iommu_kmap); - -/** - * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()' - * @obj: objective iommu - * @da: iommu device virtual address - * - * Frees the iommu virtually contiguous memory area starting at - * @da, which was passed to and was returned by'iommu_kmap()'. - */ -void iommu_kunmap(struct iommu *obj, u32 da) -{ - struct sg_table *sgt; - typedef void (*func_t)(const void *); - - sgt = unmap_vm_area(obj, da, (func_t)iounmap, - IOVMF_LINEAR | IOVMF_MMIO); - if (!sgt) - dev_dbg(obj->dev, "%s: No sgt\n", __func__); - sgtable_free(sgt); -} -EXPORT_SYMBOL_GPL(iommu_kunmap); - -/** - * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper - * @obj: objective iommu - * @da: contiguous iommu virtual memory - * @bytes: bytes for allocation - * @flags: iovma and page property - * - * Allocate @bytes linearly and creates 1-1-1 mapping and returns - * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set. - */ -u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) -{ - void *va; - u32 pa; - - if (!obj || !obj->dev || !bytes) - return -EINVAL; - - bytes = PAGE_ALIGN(bytes); - - va = kmalloc(bytes, GFP_KERNEL | GFP_DMA); - if (!va) - return -ENOMEM; - pa = virt_to_phys(va); - - flags |= IOVMF_LINEAR; - flags |= IOVMF_ALLOC; - - da = __iommu_kmap(obj, da, pa, va, bytes, flags); - if (IS_ERR_VALUE(da)) - kfree(va); - - return da; -} -EXPORT_SYMBOL_GPL(iommu_kmalloc); - -/** - * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()' - * @obj: objective iommu - * @da: iommu device virtual address - * - * Frees the iommu virtually contiguous memory area starting at - * @da, which was passed to and was returned by'iommu_kmalloc()'. - */ -void iommu_kfree(struct iommu *obj, u32 da) -{ - struct sg_table *sgt; - - sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC); - if (!sgt) - dev_dbg(obj->dev, "%s: No sgt\n", __func__); - sgtable_free(sgt); -} -EXPORT_SYMBOL_GPL(iommu_kfree); - - -static int __init iovmm_init(void) -{ - const unsigned long flags = SLAB_HWCACHE_ALIGN; - struct kmem_cache *p; - - p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0, - flags, NULL); - if (!p) - return -ENOMEM; - iovm_area_cachep = p; - - return 0; -} -module_init(iovmm_init); - -static void __exit iovmm_exit(void) -{ - kmem_cache_destroy(iovm_area_cachep); -} -module_exit(iovmm_exit); - -MODULE_DESCRIPTION("omap iommu: simple virtual address space management"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 363c91e44ef..8b28664d1c6 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/cacheflush.h> @@ -29,10 +28,8 @@ #include <plat/sram.h> #include <plat/board.h> #include <plat/cpu.h> -#include <plat/vram.h> #include "sram.h" -#include "fb.h" /* XXX These "sideways" includes are a sign that something is wrong */ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) @@ -41,16 +38,9 @@ #endif #define OMAP1_SRAM_PA 0x20000000 -#define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP2_SRAM_VA 0xfe400000 -#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) -#define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_VA 0xfe400000 #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 @@ -73,9 +63,9 @@ #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) static unsigned long omap_sram_start; -static unsigned long omap_sram_base; +static void __iomem *omap_sram_base; static unsigned long omap_sram_size; -static unsigned long omap_sram_ceil; +static void __iomem *omap_sram_ceil; /* * Depending on the target RAMFS firewall setup, the public usable amount of @@ -112,12 +102,9 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { - unsigned long reserved; - if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { - omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { @@ -126,25 +113,20 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x8000; /* 32K */ } } else if (cpu_is_omap44xx()) { - omap_sram_base = OMAP4_SRAM_PUB_VA; omap_sram_start = OMAP4_SRAM_PUB_PA; omap_sram_size = 0xa000; /* 40K */ } else { - omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { if (cpu_is_omap34xx()) { - omap_sram_base = OMAP3_SRAM_VA; omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap44xx()) { - omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; omap_sram_size = 0xe000; /* 56K */ } else { - omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) omap_sram_size = 0xa0000; /* 640K */ @@ -153,7 +135,6 @@ static void __init omap_detect_sram(void) } } } else { - omap_sram_base = OMAP1_SRAM_VA; omap_sram_start = OMAP1_SRAM_PA; if (cpu_is_omap7xx()) @@ -170,35 +151,14 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x4000; } } - reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base, - omap_sram_size, - omap_sram_start + SRAM_BOOTLOADER_SZ, - omap_sram_size - SRAM_BOOTLOADER_SZ); - omap_sram_size -= reserved; - - reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, - omap_sram_size, - omap_sram_start + SRAM_BOOTLOADER_SZ, - omap_sram_size - SRAM_BOOTLOADER_SZ); - omap_sram_size -= reserved; - - omap_sram_ceil = omap_sram_base + omap_sram_size; } -static struct map_desc omap_sram_io_desc[] __initdata = { - { /* .length gets filled in at runtime */ - .virtual = OMAP1_SRAM_VA, - .pfn = __phys_to_pfn(OMAP1_SRAM_PA), - .type = MT_MEMORY - } -}; - /* * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ static void __init omap_map_sram(void) { - unsigned long base; + int cached = 1; if (omap_sram_size == 0) return; @@ -211,28 +171,18 @@ static void __init omap_map_sram(void) * the ARM may attempt to write cache lines back to SDRAM * which will cause the system to hang. */ - omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; + cached = 0; } - omap_sram_io_desc[0].virtual = omap_sram_base; - base = omap_sram_start; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE); - iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); - - pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n", - (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn), - omap_sram_io_desc[0].virtual, - omap_sram_io_desc[0].length); + omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, + cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - /* - * Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but since we're called from map_io(), we - * must do it here. - */ - local_flush_tlb_all(); - flush_cache_all(); + omap_sram_ceil = omap_sram_base + omap_sram_size; /* * Looks like we need to preserve some bootloader code at the @@ -251,13 +201,18 @@ static void __init omap_map_sram(void) */ void *omap_sram_push_address(unsigned long size) { - if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; + + available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + + if (size > available) { pr_err("Not enough space in SRAM\n"); return NULL; } - omap_sram_ceil -= size; - omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN); + new_ceil -= size; + new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); + omap_sram_ceil = IOMEM(new_ceil); return (void *)omap_sram_ceil; } diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 3075b9fdde8..3abf30428be 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -12,15 +12,7 @@ #define __PLAT_GPIO_H #include <linux/init.h> -#include <asm-generic/gpio.h> - -/* - * GENERIC_GPIO primitives. - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq +#include <linux/types.h> /* * Orion-specific GPIO API extensions. diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 3aca5ba0f87..f302d048392 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -4,7 +4,6 @@ obj-y := dma.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c deleted file mode 100644 index a11dc367050..00000000000 --- a/arch/arm/plat-pxa/gpio.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * linux/arch/arm/plat-pxa/gpio.c - * - * Generic PXA GPIO handling - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> -#include <linux/slab.h> - -#include <mach/gpio.h> - -int pxa_last_gpio; - -struct pxa_gpio_chip { - struct gpio_chip chip; - void __iomem *regbase; - char label[10]; - - unsigned long irq_mask; - unsigned long irq_edge_rise; - unsigned long irq_edge_fall; - -#ifdef CONFIG_PM - unsigned long saved_gplr; - unsigned long saved_gpdr; - unsigned long saved_grer; - unsigned long saved_gfer; -#endif -}; - -static DEFINE_SPINLOCK(gpio_lock); -static struct pxa_gpio_chip *pxa_gpio_chips; - -#define for_each_gpio_chip(i, c) \ - for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) - -static inline void __iomem *gpio_chip_base(struct gpio_chip *c) -{ - return container_of(c, struct pxa_gpio_chip, chip)->regbase; -} - -static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) -{ - return &pxa_gpio_chips[gpio_to_bank(gpio)]; -} - -static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - void __iomem *base = gpio_chip_base(chip); - uint32_t value, mask = 1 << offset; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - value = __raw_readl(base + GPDR_OFFSET); - if (__gpio_is_inverted(chip->base + offset)) - value |= mask; - else - value &= ~mask; - __raw_writel(value, base + GPDR_OFFSET); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} - -static int pxa_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - void __iomem *base = gpio_chip_base(chip); - uint32_t tmp, mask = 1 << offset; - unsigned long flags; - - __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); - - spin_lock_irqsave(&gpio_lock, flags); - - tmp = __raw_readl(base + GPDR_OFFSET); - if (__gpio_is_inverted(chip->base + offset)) - tmp &= ~mask; - else - tmp |= mask; - __raw_writel(tmp, base + GPDR_OFFSET); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} - -static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset); -} - -static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - __raw_writel(1 << offset, gpio_chip_base(chip) + - (value ? GPSR_OFFSET : GPCR_OFFSET)); -} - -static int __init pxa_init_gpio_chip(int gpio_end) -{ - int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; - struct pxa_gpio_chip *chips; - - chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); - if (chips == NULL) { - pr_err("%s: failed to allocate GPIO chips\n", __func__); - return -ENOMEM; - } - - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { - struct gpio_chip *c = &chips[i].chip; - - sprintf(chips[i].label, "gpio-%d", i); - chips[i].regbase = (void __iomem *)GPIO_BANK(i); - - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - - /* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; - gpiochip_add(c); - } - pxa_gpio_chips = chips; - return 0; -} - -/* Update only those GRERx and GFERx edge detection register bits if those - * bits are set in c->irq_mask - */ -static inline void update_edge_detect(struct pxa_gpio_chip *c) -{ - uint32_t grer, gfer; - - grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; - gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; - grer |= c->irq_edge_rise & c->irq_mask; - gfer |= c->irq_edge_fall & c->irq_mask; - __raw_writel(grer, c->regbase + GRER_OFFSET); - __raw_writel(gfer, c->regbase + GFER_OFFSET); -} - -static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - struct pxa_gpio_chip *c; - int gpio = irq_to_gpio(d->irq); - unsigned long gpdr, mask = GPIO_bit(gpio); - - c = gpio_to_pxachip(gpio); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - * GPIOs set to alternate function or to output during probe - */ - if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) - return 0; - - if (__gpio_is_occupied(gpio)) - return 0; - - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - gpdr = __raw_readl(c->regbase + GPDR_OFFSET); - - if (__gpio_is_inverted(gpio)) - __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET); - else - __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET); - - if (type & IRQ_TYPE_EDGE_RISING) - c->irq_edge_rise |= mask; - else - c->irq_edge_rise &= ~mask; - - if (type & IRQ_TYPE_EDGE_FALLING) - c->irq_edge_fall |= mask; - else - c->irq_edge_fall &= ~mask; - - update_edge_detect(c); - - pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, - ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), - ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); - return 0; -} - -static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) -{ - struct pxa_gpio_chip *c; - int loop, gpio, gpio_base, n; - unsigned long gedr; - - do { - loop = 0; - for_each_gpio_chip(gpio, c) { - gpio_base = c->chip.base; - - gedr = __raw_readl(c->regbase + GEDR_OFFSET); - gedr = gedr & c->irq_mask; - __raw_writel(gedr, c->regbase + GEDR_OFFSET); - - n = find_first_bit(&gedr, BITS_PER_LONG); - while (n < BITS_PER_LONG) { - loop = 1; - - generic_handle_irq(gpio_to_irq(gpio_base + n)); - n = find_next_bit(&gedr, BITS_PER_LONG, n + 1); - } - } - } while (loop); -} - -static void pxa_ack_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - - __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); -} - -static void pxa_mask_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - uint32_t grer, gfer; - - c->irq_mask &= ~GPIO_bit(gpio); - - grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio); - gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio); - __raw_writel(grer, c->regbase + GRER_OFFSET); - __raw_writel(gfer, c->regbase + GFER_OFFSET); -} - -static void pxa_unmask_muxed_gpio(struct irq_data *d) -{ - int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); - - c->irq_mask |= GPIO_bit(gpio); - update_edge_detect(c); -} - -static struct irq_chip pxa_muxed_gpio_chip = { - .name = "GPIO", - .irq_ack = pxa_ack_muxed_gpio, - .irq_mask = pxa_mask_muxed_gpio, - .irq_unmask = pxa_unmask_muxed_gpio, - .irq_set_type = pxa_gpio_irq_type, -}; - -void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) -{ - struct pxa_gpio_chip *c; - int gpio, irq; - - pxa_last_gpio = end; - - /* Initialize GPIO chips */ - pxa_init_gpio_chip(end); - - /* clear all GPIO edge detects */ - for_each_gpio_chip(gpio, c) { - __raw_writel(0, c->regbase + GFER_OFFSET); - __raw_writel(0, c->regbase + GRER_OFFSET); - __raw_writel(~0,c->regbase + GEDR_OFFSET); - } - - for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { - irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Install handler for GPIO>=2 edge detect interrupts */ - irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler); - pxa_muxed_gpio_chip.irq_set_wake = fn; -} - -#ifdef CONFIG_PM -static int pxa_gpio_suspend(void) -{ - struct pxa_gpio_chip *c; - int gpio; - - for_each_gpio_chip(gpio, c) { - c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET); - c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET); - c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET); - c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET); - - /* Clear GPIO transition detect bits */ - __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET); - } - return 0; -} - -static void pxa_gpio_resume(void) -{ - struct pxa_gpio_chip *c; - int gpio; - - for_each_gpio_chip(gpio, c) { - /* restore level with set/clear */ - __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET); - __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET); - - __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET); - __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET); - __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET); - } -} -#else -#define pxa_gpio_suspend NULL -#define pxa_gpio_resume NULL -#endif - -struct syscore_ops pxa_gpio_syscore_ops = { - .suspend = pxa_gpio_suspend, - .resume = pxa_gpio_resume, -}; diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h new file mode 100644 index 00000000000..b6390beff32 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h @@ -0,0 +1,44 @@ +#ifndef __PLAT_PXA_GPIO_H +#define __PLAT_PXA_GPIO_H + +struct irq_data; + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); + +#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h index 1ddd2b97a72..258f77210b0 100644 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ b/arch/arm/plat-pxa/include/plat/gpio.h @@ -1,35 +1,10 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H -struct irq_data; +#define __ARM_GPIOLIB_COMPLEX -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 +/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ +#include <mach/gpio-pxa.h> static inline int gpio_get_value(unsigned gpio) { @@ -52,13 +27,4 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_cansleep __gpio_cansleep -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); #endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 89e68e07b0a..5c79c29f283 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -456,7 +456,7 @@ struct mfp_addr_map { #define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_base(void __iomem *mfpr_base); void __init mfp_init_addr(struct mfp_addr_map *map); /* diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be12eadcce2..2c4dbb1f423 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -229,7 +229,7 @@ void mfp_write(int mfp, unsigned long val) spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void __init mfp_init_base(unsigned long mfpr_base) +void __init mfp_init_base(void __iomem *mfpr_base) { int i; @@ -237,7 +237,7 @@ void __init mfp_init_base(unsigned long mfpr_base) for (i = 0; i < ARRAY_SIZE(mfp_table); i++) mfp_table[i].config = -1; - mfpr_mmio_base = (void __iomem *)mfpr_base; + mfpr_mmio_base = mfpr_base; } void __init mfp_init_addr(struct mfp_addr_map *map) diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index c1fc6c6fac7..3c6335307fb 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd) void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode = 0x0; - /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { - idcode = s3c24xx_read_idcode_v5(); + samsung_cpu_id = s3c24xx_read_idcode_v5(); } else { - idcode = s3c24xx_read_idcode_v4(); + samsung_cpu_id = s3c24xx_read_idcode_v4(); } + s3c24xx_init_cpu(); arm_pm_restart = s3c24xx_pm_restart; - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h deleted file mode 100644 index bd534d32b99..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ /dev/null @@ -1,100 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/map.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S3C24XX_MAP_H -#define __ASM_PLAT_S3C24XX_MAP_H - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M -#define S3C_UART_OFFSET (0x4000) - -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 mapping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_PLAT_S3C24XX_MAP_H */ diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c954c04..9a197e55f66 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -22,7 +22,6 @@ config PLAT_S5P select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER - select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index bbc2aa7449c..7b0a28f73a6 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -33,48 +33,66 @@ static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_exynos4210[] = "EXYNOS4210"; +static const char name_exynos4212[] = "EXYNOS4212"; +static const char name_exynos4412[] = "EXYNOS4412"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x56440100, - .idmask = 0xfffff000, + .idcode = S5P6440_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36450000, - .idmask = 0xfffff000, + .idcode = S5P6450_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, .init = s5p64x0_init, .name = name_s5p6450, }, { - .idcode = 0x43100000, - .idmask = 0xfffff000, + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, .map_io = s5pc100_map_io, .init_clocks = s5pc100_init_clocks, .init_uarts = s5pc100_init_uarts, .init = s5pc100_init, .name = name_s5pc100, }, { - .idcode = 0x43110000, - .idmask = 0xfffff000, + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, .map_io = s5pv210_map_io, .init_clocks = s5pv210_init_clocks, .init_uarts = s5pv210_init_uarts, .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43210000, - .idmask = 0xfffe0000, + .idcode = EXYNOS4210_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos4_init, .name = name_exynos4210, + }, { + .idcode = EXYNOS4212_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4212, + }, { + .idcode = EXYNOS4412_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4412, }, }; @@ -114,13 +132,13 @@ static struct map_desc s5p_iodesc[] __initdata = { void __init s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr) { - unsigned long idcode; - /* initialize the io descriptors we need for initialization */ iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); if (mach_desc) iotable_init(mach_desc, size); - idcode = __raw_readl(cpuid_addr); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + /* detect cpu id and rev. */ + s5p_init_cpu(cpuid_addr); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index afaf87fdb93..c9308db3618 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX0, - .end = IRQ_S5P_UART_RX0, + .start = IRQ_UART0, + .end = IRQ_UART0, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = IRQ_S5P_UART_TX0, - .end = IRQ_S5P_UART_TX0, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR0, - .end = IRQ_S5P_UART_ERR0, - .flags = IORESOURCE_IRQ, - } }; static struct resource s5p_uart1_resource[] = { @@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX1, - .end = IRQ_S5P_UART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX1, - .end = IRQ_S5P_UART_TX1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR1, - .end = IRQ_S5P_UART_ERR1, + .start = IRQ_UART1, + .end = IRQ_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX2, - .end = IRQ_S5P_UART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX2, - .end = IRQ_S5P_UART_TX2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR2, - .end = IRQ_S5P_UART_ERR2, + .start = IRQ_UART2, + .end = IRQ_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX3, - .end = IRQ_S5P_UART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX3, - .end = IRQ_S5P_UART_TX3, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR3, - .end = IRQ_S5P_UART_ERR3, + .start = IRQ_UART3, + .end = IRQ_UART3, .flags = IORESOURCE_IRQ, }, #endif @@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX4, - .end = IRQ_S5P_UART_RX4, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX4, - .end = IRQ_S5P_UART_TX4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR4, - .end = IRQ_S5P_UART_ERR4, + .start = IRQ_UART4, + .end = IRQ_UART4, .flags = IORESOURCE_IRQ, }, #endif @@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_S5P_UART_RX5, - .end = IRQ_S5P_UART_RX5, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX5, - .end = IRQ_S5P_UART_TX5, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR5, - .end = IRQ_S5P_UART_ERR5, + .start = IRQ_UART5, + .end = IRQ_UART5, .flags = IORESOURCE_IRQ, }, #endif diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h index 907caab53dc..f680a143e38 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -14,10 +14,11 @@ extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void exynos4_register_clocks(void); +extern void exynos4210_register_clocks(void); +extern void exynos4212_register_clocks(void); extern void exynos4_setup_clocks(void); -#ifdef CONFIG_CPU_EXYNOS4210 - +#ifdef CONFIG_ARCH_EXYNOS4 extern int exynos4_init(void); extern void exynos4_init_irq(void); extern void exynos4_map_io(void); diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index ba9121c60a2..144dbfc6506 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -37,41 +37,6 @@ #define IRQ_VIC1_BASE S5P_VIC1_BASE #define IRQ_VIC2_BASE S5P_VIC2_BASE -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S5P_UART_BASE0 (16) -#define IRQ_S5P_UART_BASE1 (20) -#define IRQ_S5P_UART_BASE2 (24) -#define IRQ_S5P_UART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) - -#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 -#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 -#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 -#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 - /* VIC based IRQs */ #define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index bf28fadee7a..3e21b9444cc 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -12,6 +12,59 @@ * published by the Free Software Foundation. */ +#include <asm/div64.h> + +#define PLL35XX_MDIV_MASK (0x3FF) +#define PLL35XX_PDIV_MASK (0x3F) +#define PLL35XX_SDIV_MASK (0x7) +#define PLL35XX_MDIV_SHIFT (16) +#define PLL35XX_PDIV_SHIFT (8) +#define PLL35XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; + pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; + sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL36XX_KDIV_MASK (0xFFFF) +#define PLL36XX_MDIV_MASK (0x1FF) +#define PLL36XX_PDIV_MASK (0x3F) +#define PLL36XX_SDIV_MASK (0x7) +#define PLL36XX_MDIV_SHIFT (16) +#define PLL36XX_PDIV_SHIFT (8) +#define PLL36XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; + kdiv = pll_con1 & PLL36XX_KDIV_MASK; + + tmp = baseclk; + + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + #define PLL45XX_MDIV_MASK (0x3FF) #define PLL45XX_PDIV_MASK (0x3F) #define PLL45XX_SDIV_MASK (0x7) @@ -19,8 +72,6 @@ #define PLL45XX_PDIV_SHIFT (8) #define PLL45XX_SDIV_SHIFT (0) -#include <asm/div64.h> - enum pll45xx_type_t { pll_4500, pll_4502, @@ -72,7 +123,6 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - kdiv = pll_con1 & PLL46XX_KDIV_MASK; if (pll_type == pll_4650c) kdiv = pll_con1 & PLL4650C_KDIV_MASK; diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c index a97c08957f4..afdaa1082b9 100644 --- a/arch/arm/plat-s5p/irq.c +++ b/arch/arm/plat-s5p/irq.c @@ -17,42 +17,10 @@ #include <asm/hardware/vic.h> -#include <linux/serial_core.h> #include <mach/map.h> #include <plat/regs-timer.h> -#include <plat/regs-serial.h> #include <plat/cpu.h> #include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> - -/* - * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = S5P_VA_UART0, - .base_irq = IRQ_S5P_UART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S5P_VA_UART1, - .base_irq = IRQ_S5P_UART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S5P_VA_UART2, - .base_irq = IRQ_S5P_UART_BASE2, - .parent_irq = IRQ_UART2, - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [3] = { - .regs = S5P_VA_UART3, - .base_irq = IRQ_S5P_UART_BASE3, - .parent_irq = IRQ_UART3, - }, -#endif -}; void __init s5p_init_irq(u32 *vic, u32 num_vic) { @@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic) #endif s3c_init_vic_timer_irq(5, IRQ_TIMER0); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index b3e10659e4b..3895f9aff0d 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER help Internal configuration to build the VIC timer interrupt code. -config SAMSUNG_IRQ_UART - bool - help - Internal configuration to build the IRQ UART demux code. - # options for gpio configuration support config SAMSUNG_GPIOLIB_4BIT @@ -367,4 +362,11 @@ config SAMSUNG_PD help Say Y here if you want to control Power Domain by Runtime PM. +config DEBUG_S3C_UART + depends on PLAT_SAMSUNG + int + default "0" if DEBUG_S3C_UART0 + default "1" if DEBUG_S3C_UART1 + default "2" if DEBUG_S3C_UART2 + endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 853764ba8cc..09adb84f271 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -11,7 +11,7 @@ obj- := # Objects we always build independent of SoC choice -obj-y += init.o +obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o @@ -21,7 +21,6 @@ obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o -obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o # ADC diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c new file mode 100644 index 00000000000..81c06d44c11 --- /dev/null +++ b/arch/arm/plat-samsung/cpu.c @@ -0,0 +1,58 @@ +/* linux/arch/arm/plat-samsung/cpu.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/system.h> + +#include <mach/map.h> +#include <plat/cpu.h> + +unsigned long samsung_cpu_id; +static unsigned int samsung_cpu_rev; + +unsigned int samsung_rev(void) +{ + return samsung_cpu_rev; +} +EXPORT_SYMBOL(samsung_rev); + +void __init s3c24xx_init_cpu(void) +{ + /* nothing here yet */ + + samsung_cpu_rev = 0; +} + +void __init s3c64xx_init_cpu(void) +{ + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); + if (!samsung_cpu_id) { + /* + * S3C6400 has the ID register in a different place, + * and needs a write before it can be read. + */ + __raw_writel(0x0, S3C_VA_SYS + 0xA1C); + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C); + } + + samsung_cpu_rev = 0; +} + +void __init s5p_init_cpu(void __iomem *cpuid_addr) +{ + samsung_cpu_id = __raw_readl(cpuid_addr); + samsung_cpu_rev = samsung_cpu_id & 0xFF; +} diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index db7a65c7f12..06825c4276d 100644 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc0 = { void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index 2497321f08d..4524ef44001 100644 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc1 = { void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index f60aedba417..9cede9615e4 100644 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -59,22 +59,5 @@ struct platform_device s3c_device_hsmmc2 = { void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c index ede776f20e6..0358ef4a8f6 100644 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -62,22 +62,5 @@ struct platform_device s3c_device_hsmmc3 = { void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 82543f0248a..5f3d46a9bd8 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -43,8 +43,17 @@ struct platform_device s3c_device_ts = { .resource = s3c_ts_resource, }; +static struct s3c2410_ts_mach_info default_ts_data __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { + if (!pd) + pd = &default_ts_data; + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); } diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index c0a5741b23e..54f370f0fc0 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,9 +1,12 @@ /* linux/arch/arm/plat-samsung/include/plat/cpu.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Header file for S3C24XX CPU support + * Header file for Samsung CPU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +18,108 @@ #ifndef __SAMSUNG_PLAT_CPU_H #define __SAMSUNG_PLAT_CPU_H +extern unsigned long samsung_cpu_id; + +#define S3C24XX_CPU_ID 0x32400000 +#define S3C24XX_CPU_MASK 0xFFF00000 + +#define S3C6400_CPU_ID 0x36400000 +#define S3C6410_CPU_ID 0x36410000 +#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID) +#define S3C64XX_CPU_MASK 0xFFFFF000 + +#define S5P6440_CPU_ID 0x56440000 +#define S5P6450_CPU_ID 0x36450000 +#define S5P64XX_CPU_MASK 0xFFFFF000 + +#define S5PC100_CPU_ID 0x43100000 +#define S5PC100_CPU_MASK 0xFFFFF000 + +#define S5PV210_CPU_ID 0x43110000 +#define S5PV210_CPU_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) +IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \ + defined(CONFIG_CPU_S3C2443) +# define soc_is_s3c24xx() is_samsung_s3c24xx() +#else +# define soc_is_s3c24xx() 0 +#endif + +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c64xx() is_samsung_s3c64xx() +#else +# define soc_is_s3c64xx() 0 +#endif + +#if defined(CONFIG_CPU_S5P6440) +# define soc_is_s5p6440() is_samsung_s5p6440() +#else +# define soc_is_s5p6440() 0 +#endif + +#if defined(CONFIG_CPU_S5P6450) +# define soc_is_s5p6450() is_samsung_s5p6450() +#else +# define soc_is_s5p6450() 0 +#endif + +#if defined(CONFIG_CPU_S5PC100) +# define soc_is_s5pc100() is_samsung_s5pc100() +#else +# define soc_is_s5pc100() 0 +#endif + +#if defined(CONFIG_CPU_S5PV210) +# define soc_is_s5pv210() is_samsung_s5pv210() +#else +# define soc_is_s5pv210() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -55,6 +160,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); extern void s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr); +extern void s3c24xx_init_cpu(void); +extern void s3c64xx_init_cpu(void); +extern void s5p_init_cpu(void __iomem *cpuid_addr); + +extern unsigned int samsung_rev(void); + extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c24xx_init_clocks(int xtal); diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 336d5ac0203..ab9bce637cb 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -18,11 +18,6 @@ extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - /* struct s3c24xx_dma_map * * this holds the mapping information for the channel selected @@ -31,7 +26,6 @@ struct s3c24xx_dma_addr { struct s3c24xx_dma_map { const char *name; - struct s3c24xx_dma_addr hw_addr; unsigned long channels[S3C_DMA_CHANNELS]; unsigned long channels_rx[S3C_DMA_CHANNELS]; diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h new file mode 100644 index 00000000000..7d048759b77 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S3C_H +#define __ASM_PLAT_MAP_S3C_H __FILE__ + +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C24XX_VA_UART S3C_VA_UART + +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG + +#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) + +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_PA_UART S3C2410_PA_UART + +#ifndef S3C_UART_OFFSET +#define S3C_UART_OFFSET (0x400) +#endif + +/* + * GPIO ports + * + * the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 mapping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO + +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) + +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY + +/* + * ISA style IO, for each machine to sort out mappings for, + * if it implements it. We reserve two 16M regions for ISA. + */ + +#define S3C2410_ADDR(x) S3C_ADDR(x) + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#include <plat/map-s5p.h> + +#endif /* __ASM_PLAT_MAP_S3C_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index 36d3551173b..c2d7bdae589 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h +/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -40,8 +40,6 @@ #define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) #define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) -#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) - #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) #define VA_VIC1 VA_VIC(1) @@ -58,4 +56,6 @@ #define S3C_UART_OFFSET (0x400) #endif +#include <plat/map-s3c.h> + #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index bac36fa3bec..72073484702 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -186,6 +186,11 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 +#define S3C64XX_UINTM_RXD (0) +#define S3C64XX_UINTM_TXD (2) +#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) +#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) + /* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 058e09654fe..4a6552066c7 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -86,6 +86,13 @@ struct s3c_sdhci_platdata { struct mmc_card *card); }; +/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data + * @pd: The default platform data for this device. + * @set: Pointer to the platform data to fill in. + */ +extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set); + /** * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. * @pd: Platform data to register to device. diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c deleted file mode 100644 index 3014c7226bd..00000000000 --- a/arch/arm/plat-samsung/irq-uart.c +++ /dev/null @@ -1,96 +0,0 @@ -/* arch/arm/plat-samsung/irq-uart.c - * originally part of arch/arm/plat-s3c64xx/irq.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung- UART Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/serial_core.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <plat/irq-uart.h> -#include <plat/regs-serial.h> -#include <plat/cpu.h> - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct s3c_uart_irq *uirq = desc->irq_data.handler_data; - struct irq_chip *chip = irq_get_chip(irq); - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - chained_irq_enter(chip, desc); - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); - - chained_irq_exit(chip, desc); -} - -static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, - handle_level_irq); - - if (!gc) { - pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", - __func__, uirq->base_irq); - return; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->regs.ack = S3C64XX_UINTP; - ct->regs.mask = S3C64XX_UINTM; - irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - - irq_set_handler_data(uirq->parent_irq, uirq); - irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} - -/** - * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing - * @irq: The interrupt data for registering - * @nr_irqs: The number of interrupt descriptions in @irq. - * - * Register the UART interrupts specified by @irq including the demuxing - * routines. This supports the S3C6400 and newer style of devices. - */ -void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs) -{ - for (; nr_irqs > 0; nr_irqs--, irq++) - s3c_init_uart_irq(irq); -} diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 7cf2e1e3b20..6de1a382592 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <plat/devs.h> +#include <plat/sdhci.h> void __init *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev) @@ -35,3 +36,24 @@ void __init *s3c_set_platdata(void *pd, size_t pdsize, pdev->dev.platform_data = npd; return npd; } + +void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set) +{ + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + + if (pd->max_width) + set->max_width = pd->max_width; + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; + if (pd->host_caps) + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; +} diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h index b857c91257d..40a8c178f10 100644 --- a/arch/arm/plat-spear/include/plat/gpio.h +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -1,24 +1 @@ -/* - * arch/arm/plat-spear/include/plat/gpio.h - * - * GPIO macros for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __PLAT_GPIO_H */ +/* empty */ diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 51ecfea09b2..92f18d372b6 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -77,7 +77,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * since we haven't sent them a soft interrupt, they shouldn't * be there. */ - write_pen_release(cpu); + write_pen_release(cpu_logical_map(cpu)); /* * Send the secondary CPU a soft interrupt, thereby causing diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 62cc8f98117..5bdeef96984 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,10 +12,9 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# XXX: This is a cut-down version of the file; it contains only machines that -# XXX: are in mainline or have been submitted to the machine database within -# XXX: the last 12 months. If your entry is missing please email rmk at -# XXX: <linux@arm.linux.org.uk> +# This is a cut-down version of the file; it contains only machines that +# are merged into mainline or have been edited in the machine database +# within the last 12 months. References to machine_is_NAME() do not count! # # Last update: Sat May 7 08:48:24 2011 # @@ -65,6 +64,7 @@ h7201 ARCH_H7201 H7201 161 h7202 ARCH_H7202 H7202 162 iq80321 ARCH_IQ80321 IQ80321 169 ks8695 ARCH_KS8695 KS8695 180 +karo ARCH_KARO KARO 190 smdk2410 ARCH_SMDK2410 SMDK2410 193 ceiva ARCH_CEIVA CEIVA 200 voiceblue MACH_VOICEBLUE VOICEBLUE 218 @@ -188,6 +188,7 @@ omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900 davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901 palmz72 MACH_PALMZ72 PALMZ72 904 nxdb500 MACH_NXDB500 NXDB500 905 +apf9328 MACH_APF9328 APF9328 906 palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 @@ -271,10 +272,12 @@ pcm038 MACH_PCM038 PCM038 1551 ts_x09 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 +vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 e350 MACH_E350 E350 1596 ts409 MACH_TS409 TS409 1601 +rsi_ews MACH_RSI_EWS RSI_EWS 1609 cm_x300 MACH_CM_X300 CM_X300 1616 at91sam9g20ek MACH_AT91SAM9G20EK AT91SAM9G20EK 1624 smdk6410 MACH_SMDK6410 SMDK6410 1626 @@ -331,6 +334,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 +usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841 mxlads MACH_MXLADS MXLADS 1851 linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858 afeb9260 MACH_AFEB9260 AFEB9260 1859 @@ -369,6 +373,7 @@ pcm043 MACH_PCM043 PCM043 2072 sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 +tx37 MACH_TX37 TX37 2127 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 ts219 MACH_TS219 TS219 2139 @@ -379,6 +384,7 @@ omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 btmavb101 MACH_BTMAVB101 BTMAVB101 2172 btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +tx25 MACH_TX25 TX25 2177 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 anw6410 MACH_ANW6410 ANW6410 2183 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 @@ -423,6 +429,7 @@ raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 tnetv107x MACH_TNETV107X TNETV107X 2418 +mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 smdkv210 MACH_SMDKV210 SMDKV210 2456 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 @@ -433,14 +440,17 @@ omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 ts41x MACH_TS41X TS41X 2502 phy3250 MACH_PHY3250 PHY3250 2511 mini6410 MACH_MINI6410 MINI6410 2520 +tx51 MACH_TX51 TX51 2529 mx28evk MACH_MX28EVK MX28EVK 2531 smartq5 MACH_SMARTQ5 SMARTQ5 2534 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 riot_x37 MACH_RIOT_X37 RIOT_X37 2578 +pca101 MACH_PCA101 PCA101 2595 capc7117 MACH_CAPC7117 CAPC7117 2612 icontrol MACH_ICONTROL ICONTROL 2624 +gplugd MACH_GPLUGD GPLUGD 2625 qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 mx23evk MACH_MX23EVK MX23EVK 2629 ap4evb MACH_AP4EVB AP4EVB 2630 @@ -1113,3 +1123,5 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +smdk4212 MACH_SMDK4212 SMDK4212 3638 +smdk4412 MACH_SMDK4412 SMDK4412 3765 diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 6de73aab019..a81404c09d5 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -7,7 +7,7 @@ # ccflags-y := -DDEBUG # asflags-y := -DDEBUG -KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) +KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft) LDFLAGS +=--no-warn-mismatch obj-y += vfp.o |