diff options
Diffstat (limited to 'arch/arm')
46 files changed, 1386 insertions, 161 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1b7e5c2e90e..3d1a3fb7d5f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -253,7 +253,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -372,7 +372,7 @@ config ISA_DMA_API bool config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 282b14e2f46..a3bbaaf480b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -177,7 +177,7 @@ boot := arch/arm/boot # them changed. We use .arch to indicate when they were updated # last, otherwise make uses the target directory mtime. -include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/MARKER +include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf @echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)' ifneq ($(KBUILD_SRC),) $(Q)mkdir -p include/asm-arm diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S index 57a3b163b2c..d68b9acd826 100644 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ b/arch/arm/boot/compressed/head-at91rm9200.S @@ -61,6 +61,12 @@ cmp r7, r3 beq 99f + @ Ajeco 1ARM : 1075 + mov r3, #(MACH_TYPE_ONEARM & 0xff) + orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) + cmp r7, r3 + beq 99f + @ Unknown board, use the AT91RM9200DK board @ mov r7, #MACH_TYPE_AT91RM9200 mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S index d7bbd9da2fc..8517c8606b4 100644 --- a/arch/arm/boot/compressed/ll_char_wr.S +++ b/arch/arm/boot/compressed/ll_char_wr.S @@ -77,7 +77,7 @@ Lrow4bpplp: subne r1, r1, #1 ldrneb r7, [r6, r1] bne Lrow4bpplp - LOADREGS(fd, sp!, {r4 - r7, pc}) + ldmfd sp!, {r4 - r7, pc} @ @ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc) @@ -105,7 +105,7 @@ Lrow8bpplp: subne r1, r1, #1 ldrneb r7, [r6, r1] bne Lrow8bpplp - LOADREGS(fd, sp!, {r4 - r7, pc}) + ldmfd sp!, {r4 - r7, pc} @ @ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc) @@ -127,7 +127,7 @@ Lrow1bpp: strb r7, [r0], r5 mov r7, r7, lsr #8 strb r7, [r0], r5 - LOADREGS(fd, sp!, {r4 - r7, pc}) + ldmfd sp!, {r4 - r7, pc} .bss ENTRY(con_charconvtable) diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index a7dc1370695..0dafba3a701 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -629,21 +629,6 @@ static int locomo_resume(struct platform_device *dev) #endif -#define LCM_ALC_EN 0x8000 - -void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf) -{ - unsigned long flags; - - spin_lock_irqsave(&lchip->lock, flags); - locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); - udelay(100); - locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); - locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); - spin_unlock_irqrestore(&lchip->lock, flags); -} - - /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -698,14 +683,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) , lchip->base + LOCOMO_GPD); locomo_writel(0, lchip->base + LOCOMO_GIE); - /* FrontLight */ + /* Frontlight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); - /* Same constants can be used for collie and poodle - (depending on CONFIG options in original sharp code)? */ - frontlight_set(lchip, 163, 0, 148); - /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ @@ -1063,6 +1044,30 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int } /* + * Frontlight control + */ + +static struct locomo *locomo_chip_driver(struct locomo_dev *ldev); + +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) +{ + unsigned long flags; + struct locomo *lchip = locomo_chip_driver(dev); + + if (vr) + locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1); + else + locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0); + + spin_lock_irqsave(&lchip->lock, flags); + locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + udelay(100); + locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + spin_unlock_irqrestore(&lchip->lock, flags); +} + +/* * LoCoMo "Register Access Bus." * * We model this as a regular bus type, and hang devices directly diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig new file mode 100644 index 00000000000..5401c01caef --- /dev/null +++ b/arch/arm/configs/onearm_defconfig @@ -0,0 +1,1053 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-git10 +# Mon Jun 26 13:45:44 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +CONFIG_MACH_ONEARM=y +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KAFA is not set + +# +# AT91RM9200 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_AT91RM9200=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index e1766138009..f20814e6f49 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Tue Jun 20 18:57:01 2006 +# Linux kernel version: 2.6.17-git9 +# Sun Jun 25 23:56:32 2006 # CONFIG_ARM=y CONFIG_MMU=y @@ -49,7 +49,6 @@ CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -81,18 +80,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -100,14 +107,6 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_NETX is not set # # S3C24XX Implementations @@ -123,11 +122,14 @@ CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_S3C2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y +CONFIG_MACH_SMDK2413=y CONFIG_MACH_VR1000=y CONFIG_MACH_RX3715=y CONFIG_MACH_OTOM=y CONFIG_MACH_NEXCODER_2440=y +CONFIG_S3C2410_CLOCK=y CONFIG_CPU_S3C2410=y +CONFIG_CPU_S3C2412=y CONFIG_CPU_S3C244X=y CONFIG_CPU_S3C2440=y CONFIG_CPU_S3C2442=y @@ -153,8 +155,11 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y +CONFIG_CPU_ARM926T=y CONFIG_CPU_32v4=y +CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y @@ -167,6 +172,7 @@ CONFIG_CPU_TLB_V4WBI=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set # # Bus support @@ -214,6 +220,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set # # Userspace binary formats @@ -242,6 +249,8 @@ CONFIG_NET=y # CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -260,6 +269,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -267,6 +278,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -321,6 +333,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -408,10 +421,12 @@ CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_DEBUG is not set # CONFIG_MTD_NAND_S3C2410_HWECC is not set +# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -425,8 +440,8 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_PARPORT=y # CONFIG_PARPORT_PC is not set -# CONFIG_PARPORT_ARC is not set # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y # @@ -735,6 +750,7 @@ CONFIG_I2C_ALGOBIT=m # # CONFIG_I2C_ELEKTOR is not set CONFIG_I2C_ISA=m +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y @@ -765,13 +781,13 @@ CONFIG_SENSORS_EEPROM=m # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -799,8 +815,10 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set @@ -845,6 +863,7 @@ CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -976,10 +995,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1024,6 +1045,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index de606dfa8db..302fc140154 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -702,7 +702,6 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, /* * Mark this as IO */ - vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); if (remap_pfn_range(vma, vma->vm_start, phys, diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b5bcebca1cd..75af6d6e2f2 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -340,7 +340,7 @@ sys_mmap2: streq r5, [sp, #4] beq do_mmap2 mov r0, #-EINVAL - RETINSTR(mov,pc, lr) + mov pc, lr #else str r5, [sp, #4] b do_mmap2 diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index adf62e5eaad..2af7e44218a 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -39,7 +39,7 @@ __INIT .type stext, %function ENTRY(stext) - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 04f7344e356..330b9476c39 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -71,7 +71,7 @@ __INIT .type stext, %function ENTRY(stext) - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid @@ -104,7 +104,7 @@ ENTRY(secondary_startup) * the processor type - there is no need to check the machine type * as it has already been validated by the primary processor. */ - msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type movs r10, r5 @ invalid processor? diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 9fc9af88c60..093ccba0503 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -808,7 +808,7 @@ static int __init topology_init(void) int cpu; for_each_possible_cpu(cpu) - register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu, NULL); + register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu); return 0; } diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 16153c86c3f..058b80d72aa 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -41,7 +41,7 @@ ENTRY(c_backtrace) movne r0, #0 movs frame, r0 1: moveq r0, #-2 - LOADREGS(eqfd, sp!, {r4 - r8, pc}) + ldmeqfd sp!, {r4 - r8, pc} 2: stmfd sp!, {pc} @ calculate offset of PC in STMIA instruction ldr r0, [sp], #4 @@ -85,7 +85,7 @@ ENTRY(c_backtrace) * A zero next framepointer means we're done. */ teq next, #0 - LOADREGS(eqfd, sp!, {r4 - r8, pc}) + ldmeqfd sp!, {r4 - r8, pc} /* * The next framepointer must be above the @@ -104,7 +104,7 @@ ENTRY(c_backtrace) 1007: ldr r0, =.Lbad mov r1, frame bl printk - LOADREGS(fd, sp!, {r4 - r8, pc}) + ldmfd sp!, {r4 - r8, pc} .ltorg .previous @@ -145,7 +145,7 @@ ENTRY(c_backtrace) adrne r0, .Lcr blne printk mov r0, stack - LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc}) + ldmfd sp!, {instr, reg, stack, r7, r8, pc} .Lfp: .asciz " r%d = %08X%c" .Lcr: .asciz "\n" diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 7ff9f831b3f..ea435ae2e4a 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -43,10 +43,10 @@ USER( strnebt r2, [r0], #1) tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 USER( strnebt r2, [r0], #1) mov r0, #0 - LOADREGS(fd,sp!, {r1, pc}) + ldmfd sp!, {r1, pc} .section .fixup,"ax" .align 0 -9001: LOADREGS(fd,sp!, {r0, pc}) +9001: ldmfd sp!, {r0, pc} .previous diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index 68117968482..666c99cc074 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S @@ -43,4 +43,4 @@ ENTRY(copy_page) bgt 1b @ 1 PLD( ldmeqia r1!, {r3, r4, ip, lr} ) PLD( beq 2b ) - LOADREGS(fd, sp!, {r4, pc}) @ 3 + ldmfd sp!, {r4, pc} @ 3 diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S index 7065a20ee8a..9621469beec 100644 --- a/arch/arm/lib/csumipv6.S +++ b/arch/arm/lib/csumipv6.S @@ -28,5 +28,5 @@ ENTRY(__csum_ipv6_magic) adcs r0, r0, r3 adcs r0, r0, r2 adcs r0, r0, #0 - LOADREGS(fd, sp!, {pc}) + ldmfd sp!, {pc} diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S index 9183b06c0e2..930a7025922 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay.S @@ -31,7 +31,7 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 mov r2, r2, lsr #10 @ max = 0x00007fff mul r0, r2, r0 @ max = 2^32-1 movs r0, r0, lsr #6 - RETINSTR(moveq,pc,lr) + moveq pc, lr /* * loops = r0 * HZ * loops_per_jiffy / 1000000 @@ -43,20 +43,20 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 ENTRY(__delay) subs r0, r0, #1 #if 0 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 - RETINSTR(movls,pc,lr) + movls pc, lr subs r0, r0, #1 #endif bhi __delay - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index fb7b602a6f7..c55aaa2a208 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -29,7 +29,7 @@ ENTRY(ecard_loader_read) CPSR2SPSR(r0) mov lr, pc mov pc, r2 - LOADREGS(fd, sp!, {r4 - r12, pc}) + ldmfd sp!, {r4 - r12, pc} @ Purpose: call an expansion card loader to reset the card @ Proto : void read_loader(int card_base, char *loader); @@ -41,5 +41,5 @@ ENTRY(ecard_loader_reset) CPSR2SPSR(r0) mov lr, pc add pc, r1, #8 - LOADREGS(fd, sp!, {r4 - r12, pc}) + ldmfd sp!, {r4 - r12, pc} diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 6f8e27a58c7..a5ca0248aa4 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -32,7 +32,7 @@ ENTRY(_find_first_zero_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - RETINSTR(mov,pc,lr) + mov pc, lr /* * Purpose : Find next 'zero' bit @@ -66,7 +66,7 @@ ENTRY(_find_first_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - RETINSTR(mov,pc,lr) + mov pc, lr /* * Purpose : Find next 'one' bit @@ -98,7 +98,7 @@ ENTRY(_find_first_zero_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - RETINSTR(mov,pc,lr) + mov pc, lr ENTRY(_find_next_zero_bit_be) teq r1, #0 @@ -126,7 +126,7 @@ ENTRY(_find_first_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - RETINSTR(mov,pc,lr) + mov pc, lr ENTRY(_find_next_bit_be) teq r1, #0 @@ -164,5 +164,5 @@ ENTRY(_find_next_bit_be) addeq r2, r2, #1 mov r0, r2 #endif - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index d3d8de71a2c..fb966ad0276 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -72,7 +72,7 @@ ENTRY(__raw_readsb) bpl .Linsb_16_lp tst r2, #15 - LOADREGS(eqfd, sp!, {r4 - r6, pc}) + ldmeqfd sp!, {r4 - r6, pc} .Linsb_no_16: tst r2, #8 beq .Linsb_no_8 @@ -109,7 +109,7 @@ ENTRY(__raw_readsb) str r3, [r1], #4 .Linsb_no_4: ands r2, r2, #3 - LOADREGS(eqfd, sp!, {r4 - r6, pc}) + ldmeqfd sp!, {r4 - r6, pc} cmp r2, #2 ldrb r3, [r0] @@ -119,4 +119,4 @@ ENTRY(__raw_readsb) ldrgtb r3, [r0] strgtb r3, [r1] - LOADREGS(fd, sp!, {r4 - r6, pc}) + ldmfd sp!, {r4 - r6, pc} diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 146d47c1545..4ef90418514 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -28,7 +28,7 @@ strb r3, [r1], #1 subs r2, r2, #1 - RETINSTR(moveq, pc, lr) + moveq pc, lr ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? @@ -69,7 +69,7 @@ ENTRY(__raw_readsw) bpl .Linsw_8_lp tst r2, #7 - LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) + ldmeqfd sp!, {r4, r5, r6, pc} .Lno_insw_8: tst r2, #4 beq .Lno_insw_4 @@ -102,6 +102,6 @@ ENTRY(__raw_readsw) movne r3, r3, lsr #8 strneb r3, [r1] - LOADREGS(fd, sp!, {r4, r5, r6, pc}) + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 08209fc640e..7eba2b6cc69 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -64,7 +64,7 @@ ENTRY(__raw_writesb) bpl .Loutsb_16_lp tst r2, #15 - LOADREGS(eqfd, sp!, {r4, r5, pc}) + ldmeqfd sp!, {r4, r5, pc} .Loutsb_no_16: tst r2, #8 beq .Loutsb_no_8 @@ -80,7 +80,7 @@ ENTRY(__raw_writesb) outword r3 .Loutsb_no_4: ands r2, r2, #3 - LOADREGS(eqfd, sp!, {r4, r5, pc}) + ldmeqfd sp!, {r4, r5, pc} cmp r2, #2 ldrb r3, [r1], #1 @@ -90,4 +90,4 @@ ENTRY(__raw_writesb) ldrgtb r3, [r1] strgtb r3, [r0] - LOADREGS(fd, sp!, {r4, r5, pc}) + ldmfd sp!, {r4, r5, pc} diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 52d62b48129..1607a29f49b 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -29,7 +29,7 @@ orr r3, r3, r3, lsl #16 str r3, [r0] subs r2, r2, #1 - RETINSTR(moveq, pc, lr) + moveq pc, lr ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? @@ -80,7 +80,7 @@ ENTRY(__raw_writesw) bpl .Loutsw_8_lp tst r2, #7 - LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) + ldmeqfd sp!, {r4, r5, r6, pc} .Lno_outsw_8: tst r2, #4 beq .Lno_outsw_4 @@ -124,4 +124,4 @@ ENTRY(__raw_writesw) orrne ip, ip, ip, lsr #16 strne ip, [r0] - LOADREGS(fd, sp!, {r4, r5, r6, pc}) + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index ac34fe55d21..e7ab1ea8eba 100644 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -22,4 +22,4 @@ ENTRY(memchr) bne 1b sub r0, r0, #1 2: movne r0, #0 - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index a1795f59993..95b110b07a8 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -53,7 +53,7 @@ ENTRY(memset) stmgeia r0!, {r1, r3, ip, lr} stmgeia r0!, {r1, r3, ip, lr} bgt 2b - LOADREGS(eqfd, sp!, {pc}) @ Now <64 bytes to go. + ldmeqfd sp!, {pc} @ Now <64 bytes to go. /* * No need to correct the count; we're only testing bits from now on */ @@ -77,4 +77,4 @@ ENTRY(memset) strneb r1, [r0], #1 tst r2, #1 strneb r1, [r0], #1 - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S index 51ccc60160f..abf2508e822 100644 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S @@ -53,7 +53,7 @@ ENTRY(__memzero) stmgeia r0!, {r2, r3, ip, lr} @ 4 stmgeia r0!, {r2, r3, ip, lr} @ 4 bgt 3b @ 1 - LOADREGS(eqfd, sp!, {pc}) @ 1/2 quick exit + ldmeqfd sp!, {pc} @ 1/2 quick exit /* * No need to correct the count; we're only testing bits from now on */ @@ -77,4 +77,4 @@ ENTRY(__memzero) strneb r2, [r0], #1 @ 1 tst r1, #1 @ 1 a byte left over strneb r2, [r0], #1 @ 1 - RETINSTR(mov,pc,lr) @ 1 + mov pc, lr @ 1 diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index 5b9b493733f..9f18d6fdee6 100644 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -23,4 +23,4 @@ ENTRY(strchr) teq r2, r1 movne r0, #0 subeq r0, r0, #1 - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S index 629cc877527..35649f04fca 100644 --- a/arch/arm/lib/strncpy_from_user.S +++ b/arch/arm/lib/strncpy_from_user.S @@ -21,7 +21,6 @@ * -EFAULT on exception, or "len" if we fill the whole buffer */ ENTRY(__arch_strncpy_from_user) - save_lr mov ip, r1 1: subs r2, r2, #1 USER( ldrplbt r3, [r1], #1) @@ -31,13 +30,13 @@ USER( ldrplbt r3, [r1], #1) bne 1b sub r1, r1, #1 @ take NUL character out of count 2: sub r0, r1, ip - restore_pc + mov pc, lr .section .fixup,"ax" .align 0 9001: mov r3, #0 strb r3, [r0, #0] @ null terminate mov r0, #-EFAULT - restore_pc + mov pc, lr .previous diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S index 67bcd826812..3668a15991e 100644 --- a/arch/arm/lib/strnlen_user.S +++ b/arch/arm/lib/strnlen_user.S @@ -21,7 +21,6 @@ * or zero on exception, or n + 1 if too long */ ENTRY(__arch_strnlen_user) - save_lr mov r2, r0 1: USER( ldrbt r3, [r0], #1) @@ -31,10 +30,10 @@ USER( ldrbt r3, [r0], #1) bne 1b add r0, r0, #1 2: sub r0, r0, r2 - restore_pc + mov pc, lr .section .fixup,"ax" .align 0 9001: mov r0, #0 - restore_pc + mov pc, lr .previous diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index fa923f026f1..538df220aa4 100644 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -22,4 +22,4 @@ ENTRY(strrchr) teq r2, #0 bne 1b mov r0, r3 - RETINSTR(mov,pc,lr) + mov pc, lr diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index 0cc450f863b..1f1545d737b 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -105,7 +105,7 @@ USER( strgtbt r3, [r0], #1) @ May fault movs ip, r2 bne .Lc2u_nowords .Lc2u_finished: mov r0, #0 - LOADREGS(fd,sp!,{r2, r4 - r7, pc}) + ldmfd sp!, {r2, r4 - r7, pc} .Lc2u_src_not_aligned: bic r1, r1, #3 @@ -280,7 +280,7 @@ USER( strgtbt r3, [r0], #1) @ May fault .section .fixup,"ax" .align 0 -9001: LOADREGS(fd,sp!, {r0, r4 - r7, pc}) +9001: ldmfd sp!, {r0, r4 - r7, pc} .previous /* Prototype: unsigned long __arch_copy_from_user(void *to,const void *from,unsigned long n); @@ -369,7 +369,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault bne .Lcfu_nowords .Lcfu_finished: mov r0, #0 add sp, sp, #8 - LOADREGS(fd,sp!,{r4 - r7, pc}) + ldmfd sp!, {r4 - r7, pc} .Lcfu_src_not_aligned: bic r1, r1, #3 @@ -556,6 +556,6 @@ USER( ldrgtbt r3, [r1], #1) @ May fault movne r1, r4 blne __memzero mov r0, r4 - LOADREGS(fd,sp!, {r4 - r7, pc}) + ldmfd sp!, {r4 - r7, pc} .previous diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig index 1ab5b782831..70d402f76ce 100644 --- a/arch/arm/mach-at91rm9200/Kconfig +++ b/arch/arm/mach-at91rm9200/Kconfig @@ -4,6 +4,12 @@ menu "AT91RM9200 Implementations" comment "AT91RM9200 Board Type" +config MACH_ONEARM + bool "Ajeco 1ARM Single Board Computer" + depends on ARCH_AT91RM9200 + help + Select this if you are using Ajeco's 1ARM Single Board Computer + config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" depends on ARCH_AT91RM9200 diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index 81ebc6684ad..82db957322d 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -10,6 +10,7 @@ obj- := obj-$(CONFIG_PM) += pm.o # Board-specific support +obj-$(CONFIG_MACH_ONEARM) += board-1arm.o obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c new file mode 100644 index 00000000000..dc79e0992af --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-1arm.c @@ -0,0 +1,109 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-1arm.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + +static void __init onearm_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(PQFP_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata onearm_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 3, + .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ +}; + +static void __init onearm_map_io(void) +{ + at91rm9200_map_io(); + + /* Initialize clocks: 18.432 MHz crystal */ + at91_clock_init(18432000); + + /* Setup the serial ports and console */ + at91_init_serial(&onearm_uart_config); +} + +static struct at91_eth_data __initdata onearm_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata onearm_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata onearm_udc_data = { + .vbus_pin = AT91_PIN_PC2, + .pullup_pin = AT91_PIN_PC3, +}; + +static void __init onearm_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&onearm_eth_data); + /* USB Host */ + at91_add_device_usbh(&onearm_usbh_data); + /* USB Device */ + at91_add_device_udc(&onearm_udc_data); +} + +MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = onearm_map_io, + .init_irq = onearm_init_irq, + .init_machine = onearm_board_init, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 3b23f43cb16..57f23b46539 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -35,7 +35,6 @@ config ARCH_ADI_COYOTE config ARCH_IXDP425 bool "IXDP425" - select PCI help Say 'Y' here if you want your kernel to support Intel's IXDP425 Development Platform (Also known as Richfield). @@ -43,7 +42,6 @@ config ARCH_IXDP425 config MACH_IXDPG425 bool "IXDPG425" - select PCI help Say 'Y' here if you want your kernel to support Intel's IXDPG425 Development Platform (Also known as Montajade). @@ -51,7 +49,6 @@ config MACH_IXDPG425 config MACH_IXDP465 bool "IXDP465" - select PCI help Say 'Y' here if you want your kernel to support Intel's IXDP465 Development Platform (Also known as BMP). diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 5a4aaa0e0a0..640315d8b96 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -2,13 +2,23 @@ # Makefile for the linux kernel. # +obj-pci-y := +obj-pci-n := + +obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o +obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o +obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o +obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o +obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o +obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o + obj-y += common.o -obj-$(CONFIG_PCI) += common-pci.o -obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o -obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o -obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o -obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o -obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o +obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o +obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o +obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o +obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o +obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c index 99d333d7ebd..a3745ed37f9 100644 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -20,11 +20,10 @@ #include <linux/module.h> #include <linux/reboot.h> #include <linux/interrupt.h> +#include <linux/reboot.h> #include <asm/mach-types.h> -extern void ctrl_alt_del(void); - static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs) { /* Signal init to do the ctrlaltdel action, this will bypass init if diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index d80c362bc53..6d38e97142c 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -20,11 +20,10 @@ #include <linux/module.h> #include <linux/reboot.h> #include <linux/interrupt.h> +#include <linux/reboot.h> #include <asm/mach-types.h> -extern void ctrl_alt_del(void); - static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) { /* Signal init to do the ctrlaltdel action, this will bypass init if diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index c9862688ff3..0650bed3b96 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -189,7 +189,7 @@ ENTRY(pxa_cpu_suspend) .data .align 5 ENTRY(pxa_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC @ set SVC, irqs off + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off msr cpsr_c, r0 ldr r0, sleep_save_sp @ stack phys addr diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index f5d9cd498a5..b4171dd43df 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -71,13 +71,13 @@ config ARCH_S3C2440 Say Y here if you are using the SMDK2440. config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 cpu module" + bool "SMDK2440 with S3C2440 CPU module" depends on ARCH_S3C2440 default y if ARCH_S3C2440 select CPU_S3C2440 config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 cpu module" + bool "SMDM2440 with S3C2442 CPU module" depends on ARCH_S3C2440 select CPU_S3C2442 diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 5f6761ed96b..dc27167f4d5 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -128,7 +128,7 @@ s3c2410_sleep_save_phys: */ ENTRY(s3c2410_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 @@ load UART to allow us to print the two characters for diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 2fa1e289d17..5a84062f92a 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -177,7 +177,7 @@ sa1110_sdram_controller_fix: .data .align 5 ENTRY(sa1100_cpu_resume) - mov r0, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE msr cpsr_c, r0 @ set SVC, irqs off ldr r0, sleep_save_sp @ stack phys addr diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S index 3c58ebbf035..2ee394b11bc 100644 --- a/arch/arm/mm/copypage-v3.S +++ b/arch/arm/mm/copypage-v3.S @@ -35,7 +35,7 @@ ENTRY(v3_copy_user_page) stmia r0!, {r3, r4, ip, lr} @ 4 ldmneia r1!, {r3, r4, ip, lr} @ 4 bne 1b @ 1 - LOADREGS(fd, sp!, {r4, pc}) @ 3 + ldmfd sp!, {r4, pc} @ 3 .align 5 /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ee6f1529873..09b1a41a6de 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -29,38 +29,6 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) - .macro cpsie, flags - .ifc \flags, f - .long 0xf1080040 - .exitm - .endif - .ifc \flags, i - .long 0xf1080080 - .exitm - .endif - .ifc \flags, if - .long 0xf10800c0 - .exitm - .endif - .err - .endm - - .macro cpsid, flags - .ifc \flags, f - .long 0xf10c0040 - .exitm - .endif - .ifc \flags, i - .long 0xf10c0080 - .exitm - .endif - .ifc \flags, if - .long 0xf10c00c0 - .exitm - .endif - .err - .endm - ENTRY(cpu_v6_proc_init) mov pc, lr diff --git a/arch/arm/nwfpe/entry26.S b/arch/arm/nwfpe/entry26.S index 51940a96d6a..3e6fb5d21d6 100644 --- a/arch/arm/nwfpe/entry26.S +++ b/arch/arm/nwfpe/entry26.S @@ -26,7 +26,7 @@ It is called from the kernel with code similar to this: mov fp, #0 - teqp pc, #PSR_I_BIT | MODE_SVC + teqp pc, #PSR_I_BIT | SVC_MODE ldr r4, .LC2 ldr pc, [r4] @ Call FP module USR entry point diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 6d7de9c0412..e1372a25311 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon May 8 20:11:05 2006 +# Last update: Mon Jun 26 22:26:08 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -566,8 +566,8 @@ switchgrass MACH_SWITCHGRASS SWITCHGRASS 549 ens_cmu MACH_ENS_CMU ENS_CMU 550 mm6_sdb MACH_MM6_SDB MM6_SDB 551 saturn MACH_SATURN SATURN 552 -i30030evb MACH_ARGONPLUSEVB ARGONPLUSEVB 553 -mxc27530evb MACH_SCMA11EVB SCMA11EVB 554 +i30030evb MACH_I30030EVB I30030EVB 553 +mxc27530evb MACH_MXC27530EVB MXC27530EVB 554 smdk2800 MACH_SMDK2800 SMDK2800 555 mtwilson MACH_MTWILSON MTWILSON 556 ziti MACH_ZITI ZITI 557 @@ -647,7 +647,7 @@ sendt MACH_SENDT SENDT 630 mx2jazz MACH_MX2JAZZ MX2JAZZ 631 multiio MACH_MULTIIO MULTIIO 632 hrdisplay MACH_HRDISPLAY HRDISPLAY 633 -mxc27530ads MACH_SCMA11BB SCMA11BB 634 +mxc27530ads MACH_MXC27530ADS MXC27530ADS 634 trizeps3 MACH_TRIZEPS3 TRIZEPS3 635 zefeerdza MACH_ZEFEERDZA ZEFEERDZA 636 zefeerdzb MACH_ZEFEERDZB ZEFEERDZB 637 @@ -721,7 +721,7 @@ gp32 MACH_GP32 GP32 706 gem MACH_GEM GEM 707 i858 MACH_I858 I858 708 hx2750 MACH_HX2750 HX2750 709 -mxc91131evb MACH_ZEUSEVB ZEUSEVB 710 +mxc91131evb MACH_MXC91131EVB MXC91131EVB 710 p700 MACH_P700 P700 711 cpe MACH_CPE CPE 712 spitz MACH_SPITZ SPITZ 713 @@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787 rea9200 MACH_REA9200 REA9200 788 acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 ixp425 MACH_IXP425 IXP425 790 -i30030ads MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791 +i30030ads MACH_I30030ADS I30030ADS 791 perch MACH_PERCH PERCH 792 eis05r1 MACH_EIS05R1 EIS05R1 793 pepperpad MACH_PEPPERPAD PEPPERPAD 794 @@ -930,7 +930,7 @@ netclient MACH_NETCLIENT NETCLIENT 916 xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 -mxc30030evb MACH_ARGONLVEVB ARGONLVEVB 920 +mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 rea_2d MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 @@ -986,7 +986,7 @@ redfox MACH_REDFOX REDFOX 972 mysh_ep9315_1 MACH_MYSH_EP9315_1 MYSH_EP9315_1 973 tpf106 MACH_TPF106 TPF106 974 at91rm9200kg MACH_AT91RM9200KG AT91RM9200KG 975 -racemt2 MACH_SLEDB SLEDB 976 +rcmt2 MACH_SLEDB SLEDB 976 ontrack MACH_ONTRACK ONTRACK 977 pm1200 MACH_PM1200 PM1200 978 ess24562 MACH_ESS24XXX ESS24XXX 979 @@ -1022,7 +1022,7 @@ smdk2440 MACH_SMDK2440 SMDK2440 1008 smdk2412 MACH_SMDK2412 SMDK2412 1009 webbox MACH_WEBBOX WEBBOX 1010 cwwndp MACH_CWWNDP CWWNDP 1011 -dragon MACH_DRAGON DRAGON 1012 +i839 MACH_DRAGON DRAGON 1012 opendo_cpu_board MACH_OPENDO_CPU_BOARD OPENDO_CPU_BOARD 1013 ccm2200 MACH_CCM2200 CCM2200 1014 etwarm MACH_ETWARM ETWARM 1015 @@ -1040,3 +1040,56 @@ edg79524 MACH_EDG79524 EDG79524 1026 ai2410 MACH_AI2410 AI2410 1027 ixp465 MACH_IXP465 IXP465 1028 balloon3 MACH_BALLOON3 BALLOON3 1029 +heins MACH_HEINS HEINS 1030 +mpluseva MACH_MPLUSEVA MPLUSEVA 1031 +rt042 MACH_RT042 RT042 1032 +cwiem MACH_CWIEM CWIEM 1033 +cm_x270 MACH_CM_X270 CM_X270 1034 +cm_x255 MACH_CM_X255 CM_X255 1035 +esh_at91 MACH_ESH_AT91 ESH_AT91 1036 +sandgate3 MACH_SANDGATE3 SANDGATE3 1037 +primo MACH_PRIMO PRIMO 1038 +gemstone MACH_GEMSTONE GEMSTONE 1039 +pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040 +sidewinder MACH_SIDEWINDER SIDEWINDER 1041 +picomod1 MACH_PICOMOD1 PICOMOD1 1042 +sg590 MACH_SG590 SG590 1043 +akai9307 MACH_AKAI9307 AKAI9307 1044 +fontaine MACH_FONTAINE FONTAINE 1045 +wombat MACH_WOMBAT WOMBAT 1046 +acq300 MACH_ACQ300 ACQ300 1047 +mod_270 MACH_MOD_270 MOD_270 1048 +vmc_vc0820 MACH_VC0820 VC0820 1049 +ani_aim MACH_ANI_AIM ANI_AIM 1050 +jellyfish MACH_JELLYFISH JELLYFISH 1051 +amanita MACH_AMANITA AMANITA 1052 +vlink MACH_VLINK VLINK 1053 +dexflex MACH_DEXFLEX DEXFLEX 1054 +eigen_ttq MACH_EIGEN_TTQ EIGEN_TTQ 1055 +arcom_titan MACH_ARCOM_TITAN ARCOM_TITAN 1056 +tabla MACH_TABLA TABLA 1057 +mdirac3 MACH_MDIRAC3 MDIRAC3 1058 +mrhfbp2 MACH_MRHFBP2 MRHFBP2 1059 +at91rm9200rb MACH_AT91RM9200RB AT91RM9200RB 1060 +ani_apm MACH_ANI_APM ANI_APM 1061 +ella1 MACH_ELLA1 ELLA1 1062 +inhand_pxa27x MACH_INHAND_PXA27X INHAND_PXA27X 1063 +inhand_pxa25x MACH_INHAND_PXA25X INHAND_PXA25X 1064 +empos_xm MACH_EMPOS_XM EMPOS_XM 1065 +empos MACH_EMPOS EMPOS 1066 +empos_tiny MACH_EMPOS_TINY EMPOS_TINY 1067 +empos_sm MACH_EMPOS_SM EMPOS_SM 1068 +egret MACH_EGRET EGRET 1069 +ostrich MACH_OSTRICH OSTRICH 1070 +n50 MACH_N50 N50 1071 +ecbat91 MACH_ECBAT91 ECBAT91 1072 +stareast MACH_STAREAST STAREAST 1073 +dspg_dw MACH_DSPG_DW DSPG_DW 1074 +onearm MACH_ONEARM ONEARM 1075 +mrg110_6 MACH_MRG110_6 MRG110_6 1076 +wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077 +xm_bulverde MACH_XM_BULVERDE XM_BULVERDE 1078 +msm6100 MACH_MSM6100 MSM6100 1079 +eti_b1 MACH_ETI_B1 ETI_B1 1080 +za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081 +bit2440 MACH_BIT2440 BIT2440 1082 |