diff options
Diffstat (limited to 'arch/arm')
34 files changed, 484 insertions, 285 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9bd3a85d880..04163fece49 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -826,7 +826,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_IDE - select NEED_MACH_GPIO_H select TI_PRIV_EDMA select USE_OF select ZONE_DMA diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 30a44e2df47..40f15f133c5 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -22,17 +22,19 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/da8xx.h> -#include <linux/platform_data/usb-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> #define DA830_EVM_PHY_ID "" /* @@ -591,6 +593,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da830_register_gpio(); + if (ret) + pr_warn("da830_evm_init: GPIO init failed: %d\n", ret); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dd1fb24521a..df16cb88a26 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> @@ -38,6 +39,7 @@ #include <linux/spi/flash.h> #include <linux/wl12xx.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -1437,6 +1439,10 @@ static __init void da850_evm_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + ret = pmic_tps65070_init(); if (ret) pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 42b23a3194a..ecdc7d44fa7 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -22,15 +22,17 @@ #include <media/tvp514x.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> +#include <mach/common.h> #include "davinci.h" @@ -375,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = { static __init void dm355_evm_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(1, "dm9000"); gpio_direction_input(1); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 65a984c52df..43bacbf1531 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -19,15 +19,16 @@ #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> +#include <mach/common.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -234,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = { static __init void dm355_leopard_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(9, "dm9000"); gpio_direction_input(9); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 4078ba93776..f4a6c18912e 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { + int ret; + + ret = dm365_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm365_serial_device); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 40bb9b5b87e..9cc32c283b8 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 2bc3651d56c..44b20191a9f 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -33,17 +33,19 @@ #include <linux/mtd/partitions.h> #include <linux/clk.h> #include <linux/export.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> +#include <mach/irqs.h> #include <mach/serial.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/clock.h> #include <mach/cdce949.h> -#include <linux/platform_data/mtd-davinci-aemif.h> #include "davinci.h" #include "clock.h" @@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = { static __init void evm_init(void) { + int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm646x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 46f336fca80..bb680af9837 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -26,17 +26,18 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { static __init void davinci_ntosd2_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e0de2da41b5..2aac51d0e85 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,10 +13,12 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + davinci_serial_init(da8xx_serial_device); omapl138_hawk_config_emac(); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index d6c746e35ad..0813b5167e0 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -20,7 +21,6 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -1151,6 +1151,16 @@ static struct davinci_id da830_ids[] = { }, }; +static struct davinci_gpio_platform_data da830_gpio_platform_data = { + .ngpio = 128, + .intc_irq_num = DA830_N_CP_INTC_IRQ, +}; + +int __init da830_register_gpio(void) +{ + return da8xx_register_gpio(&da830_gpio_platform_data); +} + static struct davinci_timer_instance da830_timer_instance[2] = { { .base = DA8XX_TIMER64P0_BASE, @@ -1196,10 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .intc_irq_prios = da830_default_priorities, .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 128, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index f56e5fbfa2f..352984e1528 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -28,7 +29,6 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -1281,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config return platform_device_register(&da850_vpif_capture_dev); } +static struct davinci_gpio_platform_data da850_gpio_platform_data = { + .ngpio = 144, + .intc_irq_num = DA850_N_CP_INTC_IRQ, +}; + +int __init da850_register_gpio(void) +{ + return da8xx_register_gpio(&da850_gpio_platform_data); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), @@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .intc_irq_prios = da850_default_priorities, .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 144, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, .sram_len = SZ_128K, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 2ab5d577186..2eebc433880 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); +#define DAVINCI_GPIO_BASE 0x01C67000 +int davinci_gpio_register(struct resource *res, int size, void *pdata); + /* DM355 base addresses */ #define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); +int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); @@ -92,11 +96,13 @@ void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); int dm365_init_video(struct vpfe_config *, struct vpbe_config *); +int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); void dm644x_init_asp(struct snd_platform_data *pdata); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); +int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); @@ -106,6 +112,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); +int dm646x_gpio_register(void); extern struct platform_device dm365_serial_device[]; extern struct platform_device dm355_serial_device[]; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2e473fefd71..c46eccbbd51 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -665,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) return platform_device_register(&da8xx_lcdc_device); } +static struct resource da8xx_gpio_resources[] = { + { /* registers */ + .start = DA8XX_GPIO_BASE, + .end = DA8XX_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA8XX_GPIO0, + .end = IRQ_DA8XX_GPIO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_gpio_device = { + .name = "davinci_gpio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_gpio_resources), + .resource = da8xx_gpio_resources, +}; + +int __init da8xx_register_gpio(void *pdata) +{ + da8xx_gpio_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_gpio_device); +} + static struct resource da8xx_mmcsd0_resources[] = { { /* registers */ .start = DA8XX_MMCSD0_BASE, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 111573c0aad..3996e98f52f 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -318,6 +318,19 @@ static void davinci_init_wdt(void) platform_device_register(&davinci_wdt_device); } +static struct platform_device davinci_gpio_device = { + .name = "davinci_gpio", + .id = -1, +}; + +int davinci_gpio_register(struct resource *res, int size, void *pdata) +{ + davinci_gpio_device.resource = res; + davinci_gpio_device.num_resources = size; + davinci_gpio_device.dev.platform_data = pdata; + return platform_device_register(&davinci_gpio_device); +} + /*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3eaa5f6b216..ef9ff1fb6f5 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,8 +13,10 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> - #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -25,9 +27,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> -#include <linux/platform_data/edma.h> #include "davinci.h" #include "clock.h" @@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = { }, }; +static struct resource dm355_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM355_GPIOBNK0, + .end = IRQ_DM355_GPIOBNK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm355_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm355_gpio_register(void) +{ + return davinci_gpio_register(dm355_gpio_resources, + sizeof(dm355_gpio_resources), + &dm355_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -1005,10 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM355_GPIOBNK0, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c29e324eb0b..1511a0680f9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -19,6 +19,9 @@ #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/keyscan-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -29,9 +32,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/keyscan-davinci.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -698,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask, platform_device_register(&dm365_spi0_device); } +static struct resource dm365_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm365_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .gpio_unbanked = 8, +}; + +int __init dm365_gpio_register(void) +{ + return davinci_gpio_register(dm365_gpio_resources, + sizeof(dm365_gpio_resources), + &dm365_gpio_platform_data); +} + static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, @@ -1105,11 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .intc_irq_prios = dm365_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm365_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM365_GPIO0, - .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4f74682293d..143a3217e8e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -23,7 +24,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -771,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = { }, }; +static struct resource dm644_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_GPIOBNK0, + .end = IRQ_GPIOBNK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm644_gpio_platform_data = { + .ngpio = 71, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm644x_gpio_register(void) +{ + return davinci_gpio_register(dm644_gpio_resources, + sizeof(dm644_gpio_resources), + &dm644_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -897,10 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 71, - .gpio_irq = IRQ_GPIOBNK0, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 68f8d1f1aca..2a73f299c1d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -14,6 +14,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -24,7 +25,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -748,6 +748,30 @@ static struct platform_device vpif_capture_dev = { .num_resources = ARRAY_SIZE(vpif_capture_resource), }; +static struct resource dm646x_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM646X_GPIOBNK0, + .end = IRQ_DM646X_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { + .ngpio = 43, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm646x_gpio_register(void) +{ + return davinci_gpio_register(dm646x_gpio_resources, + sizeof(dm646x_gpio_resources), + &dm646x_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm646x_io_desc[] = { @@ -874,10 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 43, /* Only 33 usable */ - .gpio_irq = IRQ_DM646X_GPIOBNK0, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aae53072c0e..39e58b48e82 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); +int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem *da8xx_get_mem_ctlr(void); @@ -110,6 +111,8 @@ int da850_register_vpif_capture void da8xx_restart(enum reboot_mode mode, const char *cmd); void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); +int da850_register_gpio(void); +int da830_register_gpio(void); extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted file mode 100644 index 1fdd1fd3544..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_DAVINCI_GPIO_H -#define __DAVINCI_DAVINCI_GPIO_H - -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm-generic/gpio.h> - -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h deleted file mode 100644 index 960e9de47e1..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include <asm-generic/gpio.h> - -#define __ARM_GPIOLIB_COMPLEX - -/* The inline versions use the static inlines in the driver header */ -#include "gpio-davinci.h" - -/* - * The get/set/clear functions will inline when called with constant - * parameters referencing built-in GPIOs, for low-overhead bitbanging. - * - * gpio_set_value() will inline only on traditional Davinci style controllers - * with distinct set/clear registers. - * - * Otherwise, calls with variable parameters or referencing external - * GPIOs (e.g. on GPIO expander chips) use outlined functions. - */ -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) { - struct davinci_gpio_controller *ctlr; - u32 mask; - - ctlr = __gpio_to_controller(gpio); - - if (ctlr->set_data != ctlr->clr_data) { - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; - } - } - - __gpio_set_value(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs, at least for built-in GPIOs. - * - * NOTE: for built-in GPIOs, changes in reported values are synchronized - * to the GPIO clock. This is easily seen after calling gpio_set_value() - * and then immediately gpio_get_value(), where the gpio_get_value() will - * return the old value until the GPIO clock ticks and the new value gets - * latched. - */ -static inline int gpio_get_value(unsigned gpio) -{ - struct davinci_gpio_controller *ctlr; - - if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num) - return __gpio_get_value(gpio); - - ctlr = __gpio_to_controller(gpio); - return __gpio_mask(gpio) & __raw_readl(ctlr->in_data); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num) - return 0; - else - return __gpio_cansleep(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - /* don't support the reverse mapping */ - return -ENOSYS; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index ddb86631f16..49fa9abd09d 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -19,35 +19,6 @@ #include <plat/common.h> #include "common.h" -/* - * There are still devices that doesn't even know about DT, - * get clock gates here and add a clock lookup. - */ -static void __init dove_legacy_clk_init(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "marvell,dove-gating-clock"); - struct of_phandle_args clkspec; - - clkspec.np = np; - clkspec.args_count = 1; - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); -} - -static void __init dove_dt_init_early(void) -{ - mvebu_mbus_init("marvell,dove-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); -} - static void __init dove_dt_init(void) { pr_info("Dove 88AP510 SoC\n"); @@ -55,14 +26,7 @@ static void __init dove_dt_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_wins(); - - /* Setup clocks for legacy devices */ - dove_legacy_clk_init(); - - /* Internal devices not ported to DT yet */ - dove_pcie_init(1, 1); - + BUG_ON(mvebu_mbus_dt_init()); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -73,7 +37,6 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, - .init_early = dove_dt_init_early, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index dba2173e70f..8f1d327e0cd 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,6 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_WDT_RESET @@ -70,6 +71,7 @@ config CPU_S3C2442 select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. @@ -148,7 +150,6 @@ config S3C2410_DMA_DEBUG config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 help DMA device selection for S3C2410 and compatible CPUs diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d8f253f2b48..11b3b28457b 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA3, diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index f6b9f2ef01b..65d3eef7309 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA3, }, { - .name = "dma", + .name = "dma.4", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA4, }, { - .name = "dma", + .name = "dma.5", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 457261c9843..4adaa4b43ff 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -31,6 +31,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -44,6 +45,7 @@ #include <mach/regs-gpio.h> #include <plat/regs-serial.h> +#include <mach/dma.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -329,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, clk_p.rate = pclk; clk_f.rate = fclk; } + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_DMA3), +}; +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442) +static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2410_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2410_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2410_dma_platdata, + }, +}; +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, +}; + +static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2412_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2412_device_dma = { + .name = "s3c2412-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2412_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPU_S3C2440) +static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(6, 1) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) | + S3C24XX_DMA_CHANREQ(0, 2), + }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) | + S3C24XX_DMA_CHANREQ(5, 2), + }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) | + S3C24XX_DMA_CHANREQ(6, 3), + }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) | + S3C24XX_DMA_CHANREQ(5, 3), + }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2440_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2440_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2440_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416) +static struct resource s3c2443_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3), + [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4), + [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5), +}; + +static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, +}; + +static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { + .num_phy_channels = 6, + .channels = s3c2443_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2443_device_dma = { + .name = "s3c2443-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2443_dma_resource), + .resource = s3c2443_dma_resource, + .dev = { + .platform_data = &s3c2443_dma_platdata, + }, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 84b280654f4..e46c1041721 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void); extern struct syscore_ops s3c24xx_irq_syscore_ops; +extern struct platform_device s3c2410_device_dma; +extern struct platform_device s3c2412_device_dma; +extern struct platform_device s3c2440_device_dma; +extern struct platform_device s3c2443_device_dma; + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index a45fcd8ccf7..43c23e220f5 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = { &jive_device_wm8750, &s3c_device_nand, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 8146e920f10..c9d31ef28dd 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static void __init smdk2413_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index cb46847c66b..f88e672ad1e 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_usb_hsudc, + &s3c2443_device_dma, }; static void __init smdk2416_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 9435c3bef18..d9933fcc6cc 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = { #ifdef CONFIG_SND_SOC_SMDK2443_WM9710 &s3c_device_ac97, #endif + &s3c2443_device_dma, }; static void __init smdk2443_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index b66588428ec..f7ec9c55078 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, + &s3c2412_device_dma, }; static void __init vstms_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 25f40c9b7f6..99a3590f034 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,7 @@ #include <linux/ioport.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <media/s5p_hdmi.h> @@ -1465,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C24XX_DMAC) + pd.filter = s3c24xx_dma_filter; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); |