summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig32
-rw-r--r--arch/arm/Kconfig-nommu2
-rw-r--r--arch/arm/Kconfig.debug11
-rw-r--r--arch/arm/Makefile3
-rw-r--r--arch/arm/boot/compressed/Makefile2
-rw-r--r--arch/arm/boot/compressed/head.S35
-rw-r--r--arch/arm/boot/compressed/vmlinux.lds.in1
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/pl330.c4
-rw-r--r--arch/arm/common/timer-sp.c82
-rw-r--r--arch/arm/common/vic.c69
-rw-r--r--arch/arm/configs/at91x40_defconfig48
-rw-r--r--arch/arm/configs/mxs_defconfig129
-rw-r--r--arch/arm/configs/realview-smp_defconfig2
-rw-r--r--arch/arm/configs/realview_defconfig2
-rw-r--r--arch/arm/configs/stmp378x_defconfig128
-rw-r--r--arch/arm/configs/stmp37xx_defconfig108
-rw-r--r--arch/arm/configs/versatile_defconfig2
-rw-r--r--arch/arm/include/asm/cputype.h1
-rw-r--r--arch/arm/include/asm/fpstate.h2
-rw-r--r--arch/arm/include/asm/glue-cache.h2
-rw-r--r--arch/arm/include/asm/glue.h4
-rw-r--r--arch/arm/include/asm/hardware/pl080.h2
-rw-r--r--arch/arm/include/asm/hardware/timer-sp.h4
-rw-r--r--arch/arm/include/asm/i8253.h15
-rw-r--r--arch/arm/include/asm/kprobes.h3
-rw-r--r--arch/arm/include/asm/mach/time.h1
-rw-r--r--arch/arm/include/asm/sizes.h42
-rw-r--r--arch/arm/include/asm/smp.h6
-rw-r--r--arch/arm/include/asm/system.h4
-rw-r--r--arch/arm/include/asm/thread_notify.h1
-rw-r--r--arch/arm/include/asm/ucontext.h2
-rw-r--r--arch/arm/include/asm/unistd.h4
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/calls.S4
-rw-r--r--arch/arm/kernel/elf.c17
-rw-r--r--arch/arm/kernel/hw_breakpoint.c7
-rw-r--r--arch/arm/kernel/kprobes-decode.c777
-rw-r--r--arch/arm/kernel/kprobes.c3
-rw-r--r--arch/arm/kernel/leds.c28
-rw-r--r--arch/arm/kernel/perf_event.c5
-rw-r--r--arch/arm/kernel/process.c2
-rw-r--r--arch/arm/kernel/ptrace.c8
-rw-r--r--arch/arm/kernel/signal.c90
-rw-r--r--arch/arm/kernel/smp.c14
-rw-r--r--arch/arm/kernel/swp_emulate.c2
-rw-r--r--arch/arm/kernel/sys_oabi-compat.c2
-rw-r--r--arch/arm/kernel/time.c35
-rw-r--r--arch/arm/kernel/traps.c4
-rw-r--r--arch/arm/mach-at91/Kconfig1
-rw-r--r--arch/arm/mach-at91/board-carmeva.c2
-rw-r--r--arch/arm/mach-at91/board-eb01.c7
-rw-r--r--arch/arm/mach-at91/include/mach/at91_mci.h2
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h28
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-bcmring/arch.c1
-rw-r--r--arch/arm/mach-bcmring/core.c227
-rw-r--r--arch/arm/mach-bcmring/core.h1
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c6
-rw-r--r--arch/arm/mach-bcmring/dma.c4
-rw-r--r--arch/arm/mach-bcmring/include/csp/dmacHw.h6
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h4
-rw-r--r--arch/arm/mach-bcmring/include/mach/reg_umi.h2
-rw-r--r--arch/arm/mach-davinci/Kconfig6
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c4
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c2
-rw-r--r--arch/arm/mach-davinci/cpufreq.c6
-rw-r--r--arch/arm/mach-davinci/da850.c2
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c12
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm644x.c2
-rw-r--r--arch/arm/mach-davinci/include/mach/cputype.h2
-rw-r--r--arch/arm/mach-davinci/include/mach/debug-macro.S13
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h2
-rw-r--r--arch/arm/mach-ep93xx/gpio.c2
-rw-r--r--arch/arm/mach-exynos4/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-exynos4/include/mach/smp.h19
-rw-r--r--arch/arm/mach-exynos4/mct.c2
-rw-r--r--arch/arm/mach-exynos4/platsmp.c5
-rw-r--r--arch/arm/mach-exynos4/pm.c45
-rw-r--r--arch/arm/mach-exynos4/setup-sdhci-gpio.c4
-rw-r--r--arch/arm/mach-exynos4/setup-sdhci.c2
-rw-r--r--arch/arm/mach-footbridge/Kconfig2
-rw-r--r--arch/arm/mach-footbridge/isa-timer.c45
-rw-r--r--arch/arm/mach-integrator/Kconfig1
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c60
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c24
-rw-r--r--arch/arm/mach-iop13xx/pci.c4
-rw-r--r--arch/arm/mach-ixp4xx/common.c16
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.c2
-rw-r--r--arch/arm/mach-lpc32xx/pm.c2
-rw-r--r--arch/arm/mach-lpc32xx/timer.c17
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa168.h9
-rw-r--r--arch/arm/mach-mmp/time.c2
-rw-r--r--arch/arm/mach-msm/acpuclock-arm11.c2
-rw-r--r--arch/arm/mach-msm/board-qsd8x50.c5
-rw-r--r--arch/arm/mach-msm/include/mach/smp.h23
-rw-r--r--arch/arm/mach-msm/platsmp.c4
-rw-r--r--arch/arm/mach-msm/scm.c2
-rw-r--r--arch/arm/mach-msm/timer.c2
-rw-r--r--arch/arm/mach-mx3/mach-vpr200.c11
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c2
-rw-r--r--arch/arm/mach-mxs/Kconfig10
-rw-r--r--arch/arm/mach-mxs/Makefile1
-rw-r--r--arch/arm/mach-mxs/clock-mx28.c7
-rw-r--r--arch/arm/mach-mxs/mach-stmp378x_devb.c120
-rw-r--r--arch/arm/mach-mxs/timer.c20
-rw-r--r--arch/arm/mach-netx/time.c16
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S2
-rw-r--r--arch/arm/mach-omap1/board-sx1.c2
-rw-r--r--arch/arm/mach-omap1/devices.c2
-rw-r--r--arch/arm/mach-omap1/flash.c2
-rw-r--r--arch/arm/mach-omap1/include/mach/ams-delta-fiq.h2
-rw-r--r--arch/arm/mach-omap1/pm_bus.c69
-rw-r--r--arch/arm/mach-omap1/time.c69
-rw-r--r--arch/arm/mach-omap2/Makefile8
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c2
-rw-r--r--arch/arm/mach-omap2/board-igep0030.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51.c9
-rw-r--r--arch/arm/mach-omap2/clkt34xx_dpll3m2.c1
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c9
-rw-r--r--arch/arm/mach-omap2/clockdomain.c2
-rw-r--r--arch/arm/mach-omap2/clockdomain.h2
-rw-r--r--arch/arm/mach-omap2/cm2xxx_3xxx.c17
-rw-r--r--arch/arm/mach-omap2/control.c8
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c4
-rw-r--r--arch/arm/mach-omap2/devices.c6
-rw-r--r--arch/arm/mach-omap2/dma.c2
-rw-r--r--arch/arm/mach-omap2/gpio.c2
-rw-r--r--arch/arm/mach-omap2/hsmmc.c2
-rw-r--r--arch/arm/mach-omap2/include/mach/omap4-common.h7
-rw-r--r--arch/arm/mach-omap2/mcbsp.c2
-rw-r--r--arch/arm/mach-omap2/mux.c2
-rw-r--r--arch/arm/mach-omap2/mux2430.h2
-rw-r--r--arch/arm/mach-omap2/omap-smp.c5
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c6
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c9
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.c4
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c4
-rw-r--r--arch/arm/mach-omap2/omap_twl.c2
-rw-r--r--arch/arm/mach-omap2/pm.c1
-rw-r--r--arch/arm/mach-omap2/pm_bus.c85
-rw-r--r--arch/arm/mach-omap2/powerdomain.c2
-rw-r--r--arch/arm/mach-omap2/powerdomain.h2
-rw-r--r--arch/arm/mach-omap2/powerdomains3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/smartreflex.c2
-rw-r--r--arch/arm/mach-omap2/voltage.c5
-rw-r--r--arch/arm/mach-orion5x/addr-map.c2
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c2
-rw-r--r--arch/arm/mach-pxa/balloon3.c1
-rw-r--r--arch/arm/mach-pxa/clock-pxa2xx.c18
-rw-r--r--arch/arm/mach-pxa/clock-pxa3xx.c17
-rw-r--r--arch/arm/mach-pxa/clock.h7
-rw-r--r--arch/arm/mach-pxa/cm-x270.c1
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c23
-rw-r--r--arch/arm/mach-pxa/colibri-evalboard.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270-income.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270.c1
-rw-r--r--arch/arm/mach-pxa/generic.h8
-rw-r--r--arch/arm/mach-pxa/hx4700.c4
-rw-r--r--arch/arm/mach-pxa/include/mach/gpio.h17
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx-regs.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/zeus.h2
-rw-r--r--arch/arm/mach-pxa/irq.c17
-rw-r--r--arch/arm/mach-pxa/lpd270.c20
-rw-r--r--arch/arm/mach-pxa/lubbock.c21
-rw-r--r--arch/arm/mach-pxa/magician.c4
-rw-r--r--arch/arm/mach-pxa/mainstone.c22
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c12
-rw-r--r--arch/arm/mach-pxa/mfp-pxa3xx.c21
-rw-r--r--arch/arm/mach-pxa/mioa701.c45
-rw-r--r--arch/arm/mach-pxa/palmld.c1
-rw-r--r--arch/arm/mach-pxa/palmtreo.c1
-rw-r--r--arch/arm/mach-pxa/palmz72.c24
-rw-r--r--arch/arm/mach-pxa/pxa25x.c27
-rw-r--r--arch/arm/mach-pxa/pxa27x.c27
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c25
-rw-r--r--arch/arm/mach-pxa/pxa95x.c20
-rw-r--r--arch/arm/mach-pxa/raumfeld.c1
-rw-r--r--arch/arm/mach-pxa/smemc.c29
-rw-r--r--arch/arm/mach-pxa/time.c17
-rw-r--r--arch/arm/mach-pxa/trizeps4.c1
-rw-r--r--arch/arm/mach-pxa/viper.c12
-rw-r--r--arch/arm/mach-pxa/vpac270.c1
-rw-r--r--arch/arm/mach-realview/core.c44
-rw-r--r--arch/arm/mach-realview/include/mach/barriers.h2
-rw-r--r--arch/arm/mach-realview/include/mach/smp.h14
-rw-r--r--arch/arm/mach-realview/platsmp.c3
-rw-r--r--arch/arm/mach-s3c2410/include/mach/dma.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-mem.h2
-rw-r--r--arch/arm/mach-s3c2410/irq.c30
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c17
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c2
-rw-r--r--arch/arm/mach-s3c2410/nor-simtec.c2
-rw-r--r--arch/arm/mach-s3c2410/pm.c13
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c5
-rw-r--r--arch/arm/mach-s3c2412/irq.c2
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c19
-rw-r--r--arch/arm/mach-s3c2412/pm.c27
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c4
-rw-r--r--arch/arm/mach-s3c2416/irq.c2
-rw-r--r--arch/arm/mach-s3c2416/pm.c27
-rw-r--r--arch/arm/mach-s3c2416/s3c2416.c5
-rw-r--r--arch/arm/mach-s3c2440/mach-gta02.c5
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c18
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c8
-rw-r--r--arch/arm/mach-s3c2440/s3c2442.c6
-rw-r--r--arch/arm/mach-s3c2440/s3c244x-irq.c4
-rw-r--r--arch/arm/mach-s3c2440/s3c244x.c62
-rw-r--r--arch/arm/mach-s3c64xx/dma.c2
-rw-r--r--arch/arm/mach-s3c64xx/irq-pm.c18
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-fb.h2
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci.c2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-s5pv210/pm.c25
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci-gpio.c4
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci.c2
-rw-r--r--arch/arm/mach-sa1100/Makefile2
-rw-r--r--arch/arm/mach-sa1100/cpu-sa1100.c2
-rw-r--r--arch/arm/mach-sa1100/include/mach/SA-1100.h2
-rw-r--r--arch/arm/mach-sa1100/irq.c19
-rw-r--r--arch/arm/mach-sa1100/jornada720_ssp.c4
-rw-r--r--arch/arm/mach-sa1100/time.c24
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c19
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c10
-rw-r--r--arch/arm/mach-shmobile/include/mach/mmc.h2
-rw-r--r--arch/arm/mach-shmobile/include/mach/smp.h16
-rw-r--r--arch/arm/mach-shmobile/include/mach/zboot.h2
-rw-r--r--arch/arm/mach-shmobile/platsmp.c3
-rw-r--r--arch/arm/mach-shmobile/pm_runtime.c145
-rw-r--r--arch/arm/mach-stmp378x/Makefile2
-rw-r--r--arch/arm/mach-stmp378x/Makefile.boot3
-rw-r--r--arch/arm/mach-stmp378x/include/mach/entry-macro.S35
-rw-r--r--arch/arm/mach-stmp378x/include/mach/irqs.h95
-rw-r--r--arch/arm/mach-stmp378x/include/mach/pins.h151
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-apbh.h101
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-apbx.h119
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-audioin.h63
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-audioout.h104
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-bch.h56
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h88
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dcp.h87
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-digctl.h38
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dram.h27
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dri.h45
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ecc8.h39
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-emi.h25
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-gpmi.h78
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-i2c.h55
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-icoll.h45
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ir.h23
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-lcdif.h195
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-lradc.h99
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ocotp.h40
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h90
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-power.h63
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pwm.h53
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pxp.h140
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-rtc.h59
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-saif.h21
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-spdif.h49
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ssp.h102
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-sydma.h23
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-timrot.h68
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-tvenc.h67
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-uartapp.h87
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h268
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h40
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-usbphy.h37
-rw-r--r--arch/arm/mach-stmp378x/stmp378x.c299
-rw-r--r--arch/arm/mach-stmp378x/stmp378x.h25
-rw-r--r--arch/arm/mach-stmp378x/stmp378x_devb.c332
-rw-r--r--arch/arm/mach-stmp37xx/Makefile2
-rw-r--r--arch/arm/mach-stmp37xx/Makefile.boot3
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/entry-macro.S37
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/irqs.h99
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/pins.h147
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-apbh.h97
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-apbx.h113
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-audioin.h61
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-audioout.h111
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h72
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-digctl.h24
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h37
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h63
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-i2c.h55
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-icoll.h43
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h89
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-lradc.h97
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h88
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-power.h56
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-pwm.h51
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-rtc.h57
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-ssp.h101
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-timrot.h49
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h85
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h268
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h22
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h22
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h37
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx.c219
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx.h24
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx_devb.c99
-rw-r--r--arch/arm/mach-tcc8k/time.c16
-rw-r--r--arch/arm/mach-tegra/dma.c4
-rw-r--r--arch/arm/mach-tegra/gpio.c6
-rw-r--r--arch/arm/mach-tegra/include/mach/barriers.h2
-rw-r--r--arch/arm/mach-tegra/include/mach/dma.h4
-rw-r--r--arch/arm/mach-tegra/include/mach/smp.h14
-rw-r--r--arch/arm/mach-tegra/platsmp.c3
-rw-r--r--arch/arm/mach-tegra/tegra2_clocks.c9
-rw-r--r--arch/arm/mach-tegra/timer.c16
-rw-r--r--arch/arm/mach-u300/clock.c6
-rw-r--r--arch/arm/mach-u300/timer.c18
-rw-r--r--arch/arm/mach-ux500/board-mop500.c21
-rw-r--r--arch/arm/mach-ux500/include/mach/db8500-regs.h10
-rw-r--r--arch/arm/mach-ux500/include/mach/smp.h24
-rw-r--r--arch/arm/mach-ux500/platsmp.c8
-rw-r--r--arch/arm/mach-versatile/core.c44
-rw-r--r--arch/arm/mach-vexpress/ct-ca9x4.c19
-rw-r--r--arch/arm/mach-vexpress/include/mach/smp.h13
-rw-r--r--arch/arm/mach-vexpress/v2m.c39
-rw-r--r--arch/arm/mach-w90x900/time.c17
-rw-r--r--arch/arm/mm/cache-v4wb.S2
-rw-r--r--arch/arm/mm/cache-v4wt.S2
-rw-r--r--arch/arm/mm/cache-v7.S2
-rw-r--r--arch/arm/mm/init.c16
-rw-r--r--arch/arm/mm/mmap.c4
-rw-r--r--arch/arm/mm/proc-arm1020.S2
-rw-r--r--arch/arm/mm/proc-arm1020e.S2
-rw-r--r--arch/arm/mm/proc-arm1022.S2
-rw-r--r--arch/arm/mm/proc-arm1026.S2
-rw-r--r--arch/arm/mm/proc-arm720.S2
-rw-r--r--arch/arm/mm/proc-arm920.S4
-rw-r--r--arch/arm/mm/proc-arm922.S2
-rw-r--r--arch/arm/mm/proc-arm925.S2
-rw-r--r--arch/arm/mm/proc-arm926.S2
-rw-r--r--arch/arm/mm/proc-macros.S2
-rw-r--r--arch/arm/mm/proc-sa1100.S2
-rw-r--r--arch/arm/mm/proc-v6.S6
-rw-r--r--arch/arm/mm/proc-v7.S4
-rw-r--r--arch/arm/mm/proc-xsc3.S2
-rw-r--r--arch/arm/mm/proc-xscale.S4
-rw-r--r--arch/arm/plat-mxc/cpufreq.c2
-rw-r--r--arch/arm/plat-mxc/epit.c18
-rw-r--r--arch/arm/plat-mxc/gpio.c7
-rw-r--r--arch/arm/plat-mxc/include/mach/entry-macro.S4
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_nand.h2
-rw-r--r--arch/arm/plat-mxc/ssi-fiq.S2
-rw-r--r--arch/arm/plat-mxc/time.c38
-rw-r--r--arch/arm/plat-nomadik/Kconfig1
-rw-r--r--arch/arm/plat-nomadik/timer.c31
-rw-r--r--arch/arm/plat-omap/Kconfig1
-rw-r--r--arch/arm/plat-omap/devices.c2
-rw-r--r--arch/arm/plat-omap/dma.c4
-rw-r--r--arch/arm/plat-omap/gpio.c35
-rw-r--r--arch/arm/plat-omap/include/plat/flash.h2
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h2
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h2
-rw-r--r--arch/arm/plat-omap/include/plat/smp.h36
-rw-r--r--arch/arm/plat-omap/iommu.c2
-rw-r--r--arch/arm/plat-omap/mcbsp.c2
-rw-r--r--arch/arm/plat-omap/omap_device.c23
-rw-r--r--arch/arm/plat-orion/time.c21
-rw-r--r--arch/arm/plat-pxa/gpio.c17
-rw-r--r--arch/arm/plat-pxa/include/plat/mfp.h2
-rw-r--r--arch/arm/plat-pxa/mfp.c1
-rw-r--r--arch/arm/plat-s3c24xx/Makefile2
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq.c2
-rw-r--r--arch/arm/plat-s3c24xx/dma.c70
-rw-r--r--arch/arm/plat-s3c24xx/irq-pm.c7
-rw-r--r--arch/arm/plat-s5p/irq-gpioint.c2
-rw-r--r--arch/arm/plat-s5p/irq-pm.c7
-rw-r--r--arch/arm/plat-s5p/pm.c11
-rw-r--r--arch/arm/plat-s5p/s5p-time.c58
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-core.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h4
-rw-r--r--arch/arm/plat-samsung/pm-check.c6
-rw-r--r--arch/arm/plat-samsung/pm.c5
-rw-r--r--arch/arm/plat-samsung/s3c-pl330.c2
-rw-r--r--arch/arm/plat-spear/include/plat/clock.h2
-rw-r--r--arch/arm/plat-spear/time.c16
-rw-r--r--arch/arm/plat-stmp3xxx/Kconfig37
-rw-r--r--arch/arm/plat-stmp3xxx/Makefile5
-rw-r--r--arch/arm/plat-stmp3xxx/clock.c1134
-rw-r--r--arch/arm/plat-stmp3xxx/clock.h61
-rw-r--r--arch/arm/plat-stmp3xxx/core.c128
-rw-r--r--arch/arm/plat-stmp3xxx/devices.c389
-rw-r--r--arch/arm/plat-stmp3xxx/dma.c464
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/clkdev.h18
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/cputype.h33
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/debug-macro.S39
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/dma.h153
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/gpio.h28
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/gpmi.h12
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/hardware.h32
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/io.h25
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/memory.h22
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/mmc.h14
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/pinmux.h157
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/pins.h30
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/platform.h68
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h54
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/system.h49
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/timex.h20
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/uncompress.h53
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/vmalloc.h12
-rw-r--r--arch/arm/plat-stmp3xxx/irq.c50
-rw-r--r--arch/arm/plat-stmp3xxx/pinmux.c550
-rw-r--r--arch/arm/plat-stmp3xxx/timer.c186
-rw-r--r--arch/arm/plat-versatile/platsmp.c3
-rw-r--r--arch/arm/vfp/vfpmodule.c53
426 files changed, 2158 insertions, 12387 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b9f78b570e..9dd61014864 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -297,6 +297,7 @@ config ARCH_BCMRING
depends on MMU
select CPU_V6
select ARM_AMBA
+ select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -366,6 +367,7 @@ config ARCH_MXC
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
@@ -375,21 +377,13 @@ config ARCH_MXS
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
help
Support for Freescale MXS-based family of processors
-config ARCH_STMP3XXX
- bool "Freescale STMP3xxx"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
- select USB_ARCH_HAS_EHCI
- help
- Support for systems based on the Freescale 3xxx CPUs.
-
config ARCH_NETX
bool "Hilscher NetX based"
+ select CLKSRC_MMIO
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
@@ -457,6 +451,7 @@ config ARCH_IXP2000
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select CLKSRC_MMIO
select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_CLOCKEVENTS
@@ -497,6 +492,7 @@ config ARCH_LOKI
config ARCH_LPC32XX
bool "NXP LPC32XX"
+ select CLKSRC_MMIO
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
@@ -571,6 +567,7 @@ config ARCH_W90X900
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -592,6 +589,7 @@ config ARCH_NUC93X
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
@@ -617,6 +615,7 @@ config ARCH_PXA
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
@@ -667,6 +666,7 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
+ select CLKSRC_MMIO
select CPU_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
@@ -694,7 +694,7 @@ config ARCH_S3C2410
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
- the same SoC ID code. This means that there is no seperate machine
+ the same SoC ID code. This means that there is no separate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
config ARCH_S3C64XX
@@ -803,6 +803,7 @@ config ARCH_SHARK
config ARCH_TCC_926
bool "Telechips TCC ARM926-based systems"
+ select CLKSRC_MMIO
select CPU_ARM926T
select HAVE_CLK
select CLKDEV_LOOKUP
@@ -813,6 +814,7 @@ config ARCH_TCC_926
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
+ select CLKSRC_MMIO
select CPU_ARM926T
select HAVE_SCHED_CLOCK
select HAVE_TCM
@@ -874,6 +876,7 @@ config PLAT_SPEAR
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
@@ -1005,8 +1008,6 @@ source "arch/arm/mach-exynos4/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
-source "arch/arm/plat-stmp3xxx/Kconfig"
-
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
@@ -1033,6 +1034,7 @@ config PLAT_IOP
config PLAT_ORION
bool
+ select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
config PLAT_PXA
@@ -1043,6 +1045,7 @@ config PLAT_VERSATILE
config ARM_TIMER_SP804
bool
+ select CLKSRC_MMIO
source arch/arm/mm/Kconfig
@@ -1540,7 +1543,6 @@ config HIGHMEM
config HIGHPTE
bool "Allocate 2nd-level pagetables from highmem"
depends on HIGHMEM
- depends on !OUTER_CACHE
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
@@ -2012,6 +2014,8 @@ source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+ depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
+ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
endmenu
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 901e6dff843..2cef8e13f9f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -34,7 +34,7 @@ config PROCESSOR_ID
used instead of the auto-probing which utilizes the register.
config REMAP_VECTORS_TO_RAM
- bool 'Install vectors to the begining of RAM' if DRAM_BASE
+ bool 'Install vectors to the beginning of RAM' if DRAM_BASE
depends on DRAM_BASE
help
The kernel needs to change the hardware exception vectors.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 494224a9b45..03d01d783e3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -63,17 +63,6 @@ config DEBUG_USER
8 - SIGSEGV faults
16 - SIGBUS faults
-config DEBUG_ERRORS
- bool "Verbose kernel error messages"
- depends on DEBUG_KERNEL
- help
- This option controls verbose debugging information which can be
- printed when the kernel detects an internal error. This debugging
- information is useful to kernel hackers when tracking down problems,
- but mostly meaningless to other people. It's safe to say Y unless
- you are concerned with the code size or don't want to see these
- messages.
-
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c7d321a3d95..692c481196b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -185,8 +185,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_STMP378X) := stmp378x
-machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
@@ -207,7 +205,6 @@ machine-$(CONFIG_MACH_SPEAR600) := spear6xx
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 8ebbb511c78..0c6852d9350 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -74,7 +74,7 @@ ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT)
ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS)
else
ZTEXTADDR := 0
-ZBSSADDR := ALIGN(4)
+ZBSSADDR := ALIGN(8)
endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index adf583cd0c3..49f5b2eaaa8 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -179,15 +179,14 @@ not_angel:
bl cache_on
restart: adr r0, LC0
- ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12}
- ldr sp, [r0, #32]
+ ldmia r0, {r1, r2, r3, r6, r9, r11, r12}
+ ldr sp, [r0, #28]
/*
* We might be running at a different address. We need
* to fix up various pointers.
*/
sub r0, r0, r1 @ calculate the delta offset
- add r5, r5, r0 @ _start
add r6, r6, r0 @ _edata
#ifndef CONFIG_ZBOOT_ROM
@@ -206,31 +205,40 @@ restart: adr r0, LC0
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
- * r5 = start of this image
* r9 = size of decompressed image
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
- * r4 >= r10 -> OK
- * r4 + image length <= r5 -> OK
+ * r4 - 16k page directory >= r10 -> OK
+ * r4 + image length <= current position (pc) -> OK
*/
+ add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- cmp r10, r5
+ ARM( cmp r10, pc )
+ THUMB( mov lr, pc )
+ THUMB( cmp r10, lr )
bls wont_overwrite
/*
* Relocate ourselves past the end of the decompressed kernel.
- * r5 = start of this image
* r6 = _edata
* r10 = end of the decompressed kernel
* Because we always copy ahead, we need to do it from the end and go
* backward in case the source and destination overlap.
*/
- /* Round up to next 256-byte boundary. */
- add r10, r10, #256
+ /*
+ * Bump to the next 256-byte boundary with the size of
+ * the relocation code added. This avoids overwriting
+ * ourself when the offset is small.
+ */
+ add r10, r10, #((reloc_code_end - restart + 256) & ~255)
bic r10, r10, #255
+ /* Get start of code we want to copy and align it down. */
+ adr r5, restart
+ bic r5, r5, #31
+
sub r9, r6, r5 @ size to copy
add r9, r9, #31 @ rounded up to a multiple
bic r9, r9, #31 @ ... of 32 bytes
@@ -245,6 +253,11 @@ restart: adr r0, LC0
/* Preserve offset to relocated code. */
sub r6, r9, r6
+#ifndef CONFIG_ZBOOT_ROM
+ /* cache_clean_flush may use the stack, so relocate it */
+ add sp, sp, r6
+#endif
+
bl cache_clean_flush
adr r0, BSYM(restart)
@@ -333,7 +346,6 @@ not_relocated: mov r0, #0
LC0: .word LC0 @ r1
.word __bss_start @ r2
.word _end @ r3
- .word _start @ r5
.word _edata @ r6
.word _image_size @ r9
.word _got_start @ r11
@@ -1062,6 +1074,7 @@ memdump: mov r12, r0
#endif
.ltorg
+reloc_code_end:
.align
.section ".stack", "aw", %nobits
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 5309909d728..ea80abe7884 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -54,6 +54,7 @@ SECTIONS
.bss : { *(.bss) }
_end = .;
+ . = ALIGN(8); /* the stack must be 64-bit aligned */
.stack : { *(.stack) }
.stab 0 : { *(.stab) }
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e7521bca2c3..6ea9b6f3607 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
-obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 8f0f86db360..97912fa4878 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[],
unsigned lcnt0, lcnt1, ljmp0, ljmp1;
struct _arg_LPEND lpend;
- /* Max iterations possibile in DMALP is 256 */
+ /* Max iterations possible in DMALP is 256 */
if (*bursts >= 256*256) {
lcnt1 = 256;
lcnt0 = 256;
@@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi)
}
for (ev = 0; ev < pi->pcfg.num_events; ev++) {
- if (val & (1 << ev)) { /* Event occured */
+ if (val & (1 << ev)) { /* Event occurred */
struct pl330_thread *thrd;
u32 inten = readl(regs + INTEN);
int active;
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 6ef3342153b..41df4787512 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -18,53 +18,67 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/arm_timer.h>
-/*
- * These timers are currently always setup to be clocked at 1MHz.
- */
-#define TIMER_FREQ_KHZ (1000)
-#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ)
+static long __init sp804_get_clock_rate(const char *name)
+{
+ struct clk *clk;
+ long rate;
+ int err;
+
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("sp804: %s clock not found: %d\n", name,
+ (int)PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
-static void __iomem *clksrc_base;
+ err = clk_enable(clk);
+ if (err) {
+ pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+ clk_put(clk);
+ return err;
+ }
-static cycle_t sp804_read(struct clocksource *cs)
-{
- return ~readl(clksrc_base + TIMER_VALUE);
-}
+ rate = clk_get_rate(clk);
+ if (rate < 0) {
+ pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+ clk_disable(clk);
+ clk_put(clk);
+ }
-static struct clocksource clocksource_sp804 = {
- .name = "timer3",
- .rating = 200,
- .read = sp804_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+ return rate;
+}
-void __init sp804_clocksource_init(void __iomem *base)
+void __init sp804_clocksource_init(void __iomem *base, const char *name)
{
- struct clocksource *cs = &clocksource_sp804;
+ long rate = sp804_get_clock_rate(name);
- clksrc_base = base;
+ if (rate < 0)
+ return;
/* setup timer 0 as free-running clocksource */
- writel(0, clksrc_base + TIMER_CTRL);
- writel(0xffffffff, clksrc_base + TIMER_LOAD);
- writel(0xffffffff, clksrc_base + TIMER_VALUE);
+ writel(0, base + TIMER_CTRL);
+ writel(0xffffffff, base + TIMER_LOAD);
+ writel(0xffffffff, base + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- clksrc_base + TIMER_CTRL);
+ base + TIMER_CTRL);
- clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+ clocksource_mmio_init(base + TIMER_VALUE, name,
+ rate, 200, 32, clocksource_mmio_readl_down);
}
static void __iomem *clkevt_base;
+static unsigned long clkevt_reload;
/*
* IRQ handler for the timer
@@ -90,7 +104,7 @@ static void sp804_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+ writel(clkevt_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
break;
@@ -120,7 +134,6 @@ static int sp804_set_next_event(unsigned long next,
}
static struct clock_event_device sp804_clockevent = {
- .name = "timer0",
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
@@ -136,17 +149,24 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
-void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+ const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
+ long rate = sp804_get_clock_rate(name);
+
+ if (rate < 0)
+ return;
clkevt_base = base;
+ clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
- evt->irq = timer_irq;
- evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+ evt->name = name;
+ evt->irq = irq;
+ evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
- setup_irq(timer_irq, &sp804_timer_irq);
+ setup_irq(irq, &sp804_timer_irq);
clockevents_register_device(evt);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 113085a7712..7aa4262ada7 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,17 +22,16 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#if defined(CONFIG_PM)
+#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
- * @sysdev: The system device which is registered.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @resume_sources: A bitmask of interrupts for resume.
@@ -43,8 +42,6 @@
* @protect: Save for VIC_PROTECT.
*/
struct vic_device {
- struct sys_device sysdev;
-
void __iomem *base;
int irq;
u32 resume_sources;
@@ -59,11 +56,6 @@ struct vic_device {
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-
-static inline struct vic_device *to_vic(struct sys_device *sys)
-{
- return container_of(sys, struct vic_device, sysdev);
-}
#endif /* CONFIG_PM */
/**
@@ -85,10 +77,9 @@ static void vic_init2(void __iomem *base)
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
-#if defined(CONFIG_PM)
-static int vic_class_resume(struct sys_device *dev)
+#ifdef CONFIG_PM
+static void resume_one_vic(struct vic_device *vic)
{
- struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
@@ -107,13 +98,18 @@ static int vic_class_resume(struct sys_device *dev)
writel(vic->soft_int, base + VIC_INT_SOFT);
writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+}
- return 0;
+static void vic_resume(void)
+{
+ int id;
+
+ for (id = vic_id - 1; id >= 0; id--)
+ resume_one_vic(vic_devices + id);
}
-static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+static void suspend_one_vic(struct vic_device *vic)
{
- struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
@@ -128,14 +124,21 @@ static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
writel(vic->resume_irqs, base + VIC_INT_ENABLE);
writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static int vic_suspend(void)
+{
+ int id;
+
+ for (id = 0; id < vic_id; id++)
+ suspend_one_vic(vic_devices + id);
return 0;
}
-struct sysdev_class vic_class = {
- .name = "vic",
- .suspend = vic_class_suspend,
- .resume = vic_class_resume,
+struct syscore_ops vic_syscore_ops = {
+ .suspend = vic_suspend,
+ .resume = vic_resume,
};
/**
@@ -147,30 +150,8 @@ struct sysdev_class vic_class = {
*/
static int __init vic_pm_init(void)
{
- struct vic_device *dev = vic_devices;
- int err;
- int id;
-
- if (vic_id == 0)
- return 0;
-
- err = sysdev_class_register(&vic_class);
- if (err) {
- printk(KERN_ERR "%s: cannot register class\n", __func__);
- return err;
- }
-
- for (id = 0; id < vic_id; id++, dev++) {
- dev->sysdev.id = id;
- dev->sysdev.cls = &vic_class;
-
- err = sysdev_register(&dev->sysdev);
- if (err) {
- printk(KERN_ERR "%s: failed to register device\n",
- __func__);
- return err;
- }
- }
+ if (vic_id > 0)
+ register_syscore_ops(&vic_syscore_ops);
return 0;
}
diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig
new file mode 100644
index 00000000000..c55e9212fcb
--- /dev/null
+++ b/arch/arm/configs/at91x40_defconfig
@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
new file mode 100644
index 00000000000..2bf224310fb
--- /dev/null
+++ b/arch/arm/configs/mxs_defconfig
@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_STMP378X_DEVB=y
+CONFIG_MACH_TX28=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_FLEXCAN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ENC28J60=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MXS=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=m
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 5ca7a61f7c0..abe61bf379d 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index fcaa6032805..7079cbe898a 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
deleted file mode 100644
index 1079c2b6eb3..00000000000
--- a/arch/arm/configs/stmp378x_defconfig
+++ /dev/null
@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_ARCH_STMP378X=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
deleted file mode 100644
index 564a5cc4408..00000000000
--- a/arch/arm/configs/stmp37xx_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 0ce710f4750..cdd4d2bd396 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -32,7 +32,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index ed5bc9e05a4..cd4458f6417 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -2,6 +2,7 @@
#define __ASM_ARM_CPUTYPE_H
#include <linux/stringify.h>
+#include <linux/kernel.h>
#define CPUID_ID 0
#define CPUID_CACHETYPE 1
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index ee5e03efc1b..3ad4c10d0d8 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -18,7 +18,7 @@
* VFP storage area has:
* - FPEXC, FPSCR, FPINST and FPINST2.
* - 16 or 32 double precision data registers
- * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
+ * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6)
*
* FPEXC will always be non-zero once the VFP has been used in this process.
*/
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index c7afbc552c7..7e30874377e 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -126,7 +126,7 @@
#endif
#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
+#error Unknown cache maintenance model
#endif
#ifndef MULTI_CACHE
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index 0ec35d1698a..fbf71d75ec8 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -10,8 +10,8 @@
*
* This file provides the glue to stick the processor-specific bits
* into the kernel in an efficient manner. The idea is to use branches
- * when we're only targetting one class of TLB, or indirect calls
- * when we're targetting multiple classes of TLBs.
+ * when we're only targeting one class of TLB, or indirect calls
+ * when we're targeting multiple classes of TLBs.
*/
#ifdef __KERNEL__
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index f35b86e68dd..e4a04e4e562 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -16,7 +16,7 @@
* make it not entierly compatible with the PL080 specification from
* ARM. When in doubt, check the Samsung documentation first.
*
- * The Samsung defines are PL080S, and add an extra controll register,
+ * The Samsung defines are PL080S, and add an extra control register,
* the ability to move more than 2^11 counts of data and some extra
* OneNAND features.
*/
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 21e75e30d49..4384d81eee7 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,2 +1,2 @@
-void sp804_clocksource_init(void __iomem *);
-void sp804_clockevents_init(void __iomem *, unsigned int);
+void sp804_clocksource_init(void __iomem *, const char *);
+void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h
new file mode 100644
index 00000000000..70656b69d5c
--- /dev/null
+++ b/arch/arm/include/asm/i8253.h
@@ -0,0 +1,15 @@
+#ifndef __ASMARM_I8253_H
+#define __ASMARM_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
+
+extern raw_spinlock_t i8253_lock;
+
+#define outb_pit outb_p
+#define inb_pit inb_p
+
+#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index bb8a19bd582..e46bdd0097e 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t;
struct kprobe;
typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+typedef unsigned long (kprobe_check_cc)(unsigned long);
+
/* Architecture specific copy of original instruction. */
struct arch_specific_insn {
kprobe_opcode_t *insn;
kprobe_insn_handler_t *insn_handler;
+ kprobe_check_cc *insn_check_cc;
};
struct prev_kprobe {
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 883f6be5117..d5adaae5ee2 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -34,7 +34,6 @@
* timer interrupt which may be pending.
*/
struct sys_timer {
- struct sys_device dev;
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 316bb2b2be3..154b89b81d3 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -16,44 +16,6 @@
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
+#include <asm-generic/sizes.h>
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_16 0x00000010
-#define SZ_32 0x00000020
-#define SZ_64 0x00000040
-#define SZ_128 0x00000080
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_2K 0x00000800
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_48M 0x03000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
+#define SZ_48M (SZ_32M + SZ_16M)
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 96ed521f240..a87664f54f9 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -14,8 +14,6 @@
#include <linux/cpumask.h>
#include <linux/thread_info.h>
-#include <mach/smp.h>
-
#ifndef CONFIG_SMP
# error "<asm/smp.h> included in non-SMP build"
#endif
@@ -47,9 +45,9 @@ extern void smp_init_cpus(void);
/*
- * Raise an IPI cross call on CPUs in callmap.
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(const struct cpumask *mask, int ipi);
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
/*
* Boot a secondary CPU, and assign it the specified idle task.
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 9a87823642d..832888d0c20 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -159,7 +159,7 @@ extern unsigned int user_debug;
#include <mach/barriers.h>
#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() mb()
#else
#include <asm/memory.h>
@@ -249,7 +249,7 @@ do { \
* cache totally. This means that the cache becomes inconsistent, and,
* since we use normal loads/stores as well, this is really bad.
* Typically, this causes oopsen in filp_close, but could have other,
- * more disasterous effects. There are two work-arounds:
+ * more disastrous effects. There are two work-arounds:
* 1. Disable interrupts and emulate the atomic swap
* 2. Clean the cache, perform atomic swap, flush the cache
*
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index c4391ba2035..1dc98067589 100644
--- a/arch/arm/include/asm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread)
#define THREAD_NOTIFY_FLUSH 0
#define THREAD_NOTIFY_EXIT 1
#define THREAD_NOTIFY_SWITCH 2
+#define THREAD_NOTIFY_COPY 3
#endif
#endif
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 47f023aa849..14749aec94b 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -47,7 +47,7 @@ struct crunch_sigframe {
#endif
#ifdef CONFIG_IWMMXT
-/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
+/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */
#define IWMMXT_MAGIC 0x12ef842a
#define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8)
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index c891eb76c0e..87dbe3e2197 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -396,6 +396,10 @@
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
+#define __NR_syncfs (__NR_SYSCALL_BASE+373)
/*
* The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 74554f1742d..8d95446150a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
-obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 5c26eccef99..7fbf28c35bb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -379,6 +379,10 @@
CALL(sys_fanotify_init)
CALL(sys_fanotify_mark)
CALL(sys_prlimit64)
+/* 370 */ CALL(sys_name_to_handle_at)
+ CALL(sys_open_by_handle_at)
+ CALL(sys_clock_adjtime)
+ CALL(sys_syncfs)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index d4a0da1e48f..9b05c6a0dce 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch);
void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int eflags = x->e_flags;
- unsigned int personality = PER_LINUX_32BIT;
+ unsigned int personality = current->personality & ~PER_MASK;
+
+ /*
+ * We only support Linux ELF executables, so always set the
+ * personality to LINUX.
+ */
+ personality |= PER_LINUX;
/*
* APCS-26 is only valid for OABI executables
*/
- if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
- if (eflags & EF_ARM_APCS_26)
- personality = PER_LINUX;
- }
+ if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
+ (eflags & EF_ARM_APCS_26))
+ personality &= ~ADDR_LIMIT_32BIT;
+ else
+ personality |= ADDR_LIMIT_32BIT;
set_personality(personality);
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 8dbc126f715..87acc25d7a3 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info)
*/
asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
isb();
+
+ /*
+ * Clear any configured vector-catch events before
+ * enabling monitor mode.
+ */
+ asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+ isb();
}
if (enable_monitor_mode())
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 23891317dc4..15eeff6aea0 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -34,9 +34,6 @@
*
* *) If the PC is written to by the instruction, the
* instruction must be fully simulated in software.
- * If it is a conditional instruction, the handler
- * will use insn[0] to copy its condition code to
- * set r0 to 1 and insn[1] to "mov pc, lr" to return.
*
* *) Otherwise, a modified form of the instruction is
* directly executed. Its handler calls the
@@ -68,13 +65,17 @@
#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos))
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
#define PSR_fs (PSR_f|PSR_s)
#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
-#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */
-
-#define truecc_insn(insn) (((insn) & 0xf0000000) | \
- (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
typedef long (insn_0arg_fn_t)(void);
typedef long (insn_1arg_fn_t)(long);
@@ -419,14 +420,10 @@ insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
long iaddr = (long)p->addr;
int disp = branch_displacement(insn);
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
if (insn & (1 << 24))
regs->ARM_lr = iaddr + 4;
@@ -446,14 +443,10 @@ static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
int rm = insn & 0xf;
long rmv = regs->uregs[rm];
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
if (insn & (1 << 5))
regs->ARM_lr = (long)p->addr + 4;
@@ -463,9 +456,16 @@ static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
regs->ARM_cpsr |= PSR_T_BIT;
}
+static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+ regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
int rn = (insn >> 16) & 0xf;
int lbit = insn & (1 << 20);
@@ -476,9 +476,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
int reg_bit_vector;
int reg_count;
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
reg_count = 0;
reg_bit_vector = insn & 0xffff;
while (reg_bit_vector) {
@@ -510,11 +507,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
-
- if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
- return;
-
regs->ARM_pc = (long)p->addr + str_pc_offset;
simulate_ldm1stm1(p, regs);
regs->ARM_pc = (long)p->addr + 4;
@@ -525,24 +517,16 @@ static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
regs->uregs[12] = regs->uregs[13];
}
-static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
- long rnv = regs->uregs[rn];
-
- /* Save Rn in case of writeback. */
- regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
-}
-
static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
{
insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
int rd = (insn >> 12) & 0xf;
int rn = (insn >> 16) & 0xf;
int rm = insn & 0xf; /* rm may be invalid, don't care. */
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
/* Not following the C calling convention here, so need asm(). */
__asm__ __volatile__ (
@@ -554,29 +538,36 @@ static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
"str r0, %[rn] \n\t" /* in case of writeback */
"str r2, %[rd0] \n\t"
"str r3, %[rd1] \n\t"
- : [rn] "+m" (regs->uregs[rn]),
+ : [rn] "+m" (rnv),
[rd0] "=m" (regs->uregs[rd]),
[rd1] "=m" (regs->uregs[rd+1])
- : [rm] "m" (regs->uregs[rm]),
+ : [rm] "m" (rmv),
[cpsr] "r" (regs->ARM_cpsr),
[i_fn] "r" (i_fn)
: "r0", "r1", "r2", "r3", "lr", "cc"
);
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv;
}
static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
{
insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
int rd = (insn >> 12) & 0xf;
int rn = (insn >> 16) & 0xf;
int rm = insn & 0xf;
- long rnv = regs->uregs[rn];
- long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ /* rm/rmv may be invalid, don't care. */
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rnv_wb;
- regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+ rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
regs->uregs[rd+1],
regs->ARM_cpsr, i_fn);
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv_wb;
}
static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
@@ -630,31 +621,6 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */
}
-static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
-{
- insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- union reg_pair fnr;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
-
- fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
- regs->uregs[rn] = fnr.r0;
- regs->uregs[rd] = fnr.r1;
-}
-
-static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- long rnv = regs->uregs[rn];
- long rdv = regs->uregs[rd];
-
- insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
-}
-
static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
{
insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
@@ -688,32 +654,32 @@ static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
}
-static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs)
{
- insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
-
- regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
}
-static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes
+emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs)
{
insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
- int ird = (insn >> 12) & 0xf;
+ int rd = (insn >> 12) & 0xf;
+ long rdv = regs->uregs[rd];
- insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
+ regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn);
}
-static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes
+emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs)
{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
+ int rd = (insn >> 12) & 0xf;
+ int rn = insn & 0xf;
+ long rdv = regs->uregs[rd];
long rnv = regs->uregs[rn];
- insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+ regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn);
}
static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
@@ -819,6 +785,17 @@ emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
}
static void __kprobes
+emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ insnslot_1arg_rwflags(rnv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
{
insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
@@ -854,14 +831,34 @@ emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
}
+static void __kprobes
+emulate_alu_tests(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rn = (insn >> 16) & 0xf;
+ int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
+}
+
static enum kprobe_insn __kprobes
prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
- int ibit = (insn & (1 << 26)) ? 25 : 22;
+ int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25))
+ : (~insn & (1 << 22));
+
+ if (is_writeback(insn) && is_r15(insn, 16))
+ return INSN_REJECTED; /* Writeback to PC */
insn &= 0xfff00fff;
insn |= 0x00001000; /* Rn = r0, Rd = r1 */
- if (insn & (1 << ibit)) {
+ if (not_imm) {
insn &= ~0xf;
insn |= 2; /* Rm = r2 */
}
@@ -871,20 +868,40 @@ prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
}
static enum kprobe_insn __kprobes
-prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
- insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
+ insn &= 0xffff0fff; /* Rd = r0 */
asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12rm0;
+ asi->insn_handler = emulate_rd12_modify;
return INSN_GOOD;
}
static enum kprobe_insn __kprobes
-prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+prep_emulate_rd12rn0_modify(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
{
- insn &= 0xffff0fff; /* Rd = r0 */
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
+ insn &= 0xffff0ff0; /* Rd = r0 */
+ insn |= 0x00000001; /* Rn = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rn0_modify;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12;
+ asi->insn_handler = emulate_rd12rm0;
return INSN_GOOD;
}
@@ -892,6 +909,9 @@ static enum kprobe_insn __kprobes
prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -903,6 +923,9 @@ static enum kprobe_insn __kprobes
prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -914,6 +937,9 @@ static enum kprobe_insn __kprobes
prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16))
+ return INSN_REJECTED; /* Rd is PC */
+
insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
insn |= 0x00000102; /* Rs = r1, Rm = r2 */
asi->insn[0] = insn;
@@ -925,6 +951,9 @@ static enum kprobe_insn __kprobes
prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
struct arch_specific_insn *asi)
{
+ if (is_r15(insn, 16) || is_r15(insn, 12))
+ return INSN_REJECTED; /* RdHi or RdLo is PC */
+
insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
insn |= 0x00001203; /* Rs = r2, Rm = r3 */
asi->insn[0] = insn;
@@ -945,20 +974,13 @@ prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
static enum kprobe_insn __kprobes
space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
- /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
- /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
- /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
- if ((insn & 0xfff30020) == 0xf1020000 ||
- (insn & 0xfe500f00) == 0xf8100a00 ||
- (insn & 0xfe5f0f00) == 0xf84d0500)
- return INSN_REJECTED;
-
- /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
- if ((insn & 0xfd700000) == 0xf4500000) {
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rn16;
- return INSN_GOOD;
+ /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */
+ /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfe300000) == 0xf4100000) {
+ asi->insn_handler = emulate_nop;
+ return INSN_GOOD_NO_SLOT;
}
/* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
@@ -967,41 +989,22 @@ space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
return INSN_GOOD_NO_SLOT;
}
- /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
- /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- if ((insn & 0xffff00f0) == 0xf1010000 ||
- (insn & 0xff000010) == 0xfe000000) {
- asi->insn[0] = insn;
- asi->insn_handler = emulate_none;
- return INSN_GOOD;
- }
+ /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
+ /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+
+ /* Coprocessor instructions... */
/* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
/* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
- if ((insn & 0xffe00000) == 0xfc400000) {
- insn &= 0xfff00fff; /* Rn = r0 */
- insn |= 0x00001000; /* Rd = r1 */
- asi->insn[0] = insn;
- asi->insn_handler =
- (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
- return INSN_GOOD;
- }
+ /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- if ((insn & 0xfe000000) == 0xfc000000) {
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_ldcstc;
- return INSN_GOOD;
- }
-
- /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
- return INSN_GOOD;
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1010,19 +1013,18 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
if ((insn & 0x0f900010) == 0x01000000) {
- /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
- /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
- if ((insn & 0x0ff000f0) == 0x01200020 ||
- (insn & 0x0fb000f0) == 0x01200000)
- return INSN_REJECTED;
-
- /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
- if ((insn & 0x0fb00010) == 0x01000000)
- return prep_emulate_rd12(insn, asi);
+ /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01000000) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
+ asi->insn_handler = simulate_mrs;
+ return INSN_GOOD_NO_SLOT;
+ }
/* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
if ((insn & 0x0ff00090) == 0x01400080)
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+ asi);
/* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
/* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
@@ -1031,24 +1033,29 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
return prep_emulate_rd16rs8rm0_wflags(insn, asi);
/* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
- /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */
+ if ((insn & 0x0ff00090) == 0x01000080 ||
+ (insn & 0x0ff000b0) == 0x01200080)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
else if ((insn & 0x0f900090) == 0x01000010) {
- /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
- if ((insn & 0xfff000f0) == 0xe1200070)
- return INSN_REJECTED;
-
/* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
/* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
if ((insn & 0x0ff000d0) == 0x01200010) {
- asi->insn[0] = truecc_insn(insn);
+ if ((insn & 0x0ff000ff) == 0x0120003f)
+ return INSN_REJECTED; /* BLX pc */
asi->insn_handler = simulate_blx2bx;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
/* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
@@ -1059,17 +1066,27 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
/* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
/* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ if ((insn & 0x0f9000f0) == 0x01000050)
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
+
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
/* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
- else if ((insn & 0x0f000090) == 0x00000090) {
+ else if ((insn & 0x0f0000f0) == 0x00000090) {
/* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
/* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
/* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
/* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
/* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
+ /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */
+ /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */
/* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
/* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
/* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
@@ -1078,13 +1095,15 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
/* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
/* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
- if ((insn & 0x0fe000f0) == 0x00000090) {
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
- } else if ((insn & 0x0fe000f0) == 0x00200090) {
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- } else {
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
- }
+ if ((insn & 0x00d00000) == 0x00500000)
+ return INSN_REJECTED;
+ else if ((insn & 0x00e00000) == 0x00000000)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ else if ((insn & 0x00a00000) == 0x00200000)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ else
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+ asi);
}
/* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
@@ -1092,23 +1111,45 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
/* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
- /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
- /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+ /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */
+ /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */
+ /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */
/* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
/* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */
+ /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */
+
+ /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
/* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
/* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
/* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
/* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
- if ((insn & 0x0fb000f0) == 0x01000090) {
- /* SWP/SWPB */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ if ((insn & 0x0f0000f0) == 0x01000090) {
+ if ((insn & 0x0fb000f0) == 0x01000090) {
+ /* SWP/SWPB */
+ return prep_emulate_rd12rn16rm0_wflags(insn,
+ asi);
+ } else {
+ /* STREX/LDREX variants and unallocaed space */
+ return INSN_REJECTED;
+ }
+
} else if ((insn & 0x0e1000d0) == 0x00000d0) {
/* STRD/LDRD */
+ if ((insn & 0x0000e000) == 0x0000e000)
+ return INSN_REJECTED; /* Rd is LR or PC */
+ if (is_writeback(insn) && is_r15(insn, 16))
+ return INSN_REJECTED; /* Writeback to PC */
+
insn &= 0xfff00fff;
insn |= 0x00002000; /* Rn = r0, Rd = r2 */
- if (insn & (1 << 22)) {
- /* I bit */
+ if (!(insn & (1 << 22))) {
+ /* Register index */
insn &= ~0xf;
insn |= 1; /* Rm = r1 */
}
@@ -1118,6 +1159,9 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
return INSN_GOOD;
}
+ /* LDRH/STRH/LDRSB/LDRSH */
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
return prep_emulate_ldr_str(insn, asi);
}
@@ -1125,7 +1169,7 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/*
* ALU op with S bit and Rd == 15 :
- * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+ * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0e10f000) == 0x0010f000)
return INSN_REJECTED;
@@ -1154,22 +1198,61 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
insn |= 0x00000200; /* Rs = r2 */
}
asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+
+ if ((insn & 0x0f900000) == 0x01100000) {
+ /*
+ * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx
+ * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx
+ * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx
+ * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx
+ */
+ asi->insn_handler = emulate_alu_tests;
+ } else {
+ /* ALU ops which write to Rd */
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_rwflags : emulate_alu_rflags;
+ }
return INSN_GOOD;
}
static enum kprobe_insn __kprobes
space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
+ /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0x0fb00000) == 0x03000000)
+ return prep_emulate_rd12_modify(insn, asi);
+
+ /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
+ if ((insn & 0x0fff0000) == 0x03200000) {
+ unsigned op2 = insn & 0x000000ff;
+ if (op2 == 0x01 || op2 == 0x04) {
+ /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
+ /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ } else if (op2 <= 0x03) {
+ /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
+ /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
+ /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
+ /*
+ * We make WFE and WFI true NOPs to avoid stalls due
+ * to missing events whilst processing the probe.
+ */
+ asi->insn_handler = emulate_nop;
+ return INSN_GOOD_NO_SLOT;
+ }
+ /* For DBG and unallocated hints it's safest to reject them */
+ return INSN_REJECTED;
+ }
+
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
- * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
- (insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
@@ -1180,10 +1263,22 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
- insn &= 0xffff0fff; /* Rd = r0 */
+ insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */
asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+
+ if ((insn & 0x0f900000) == 0x03100000) {
+ /*
+ * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx
+ * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx
+ * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx
+ * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx
+ */
+ asi->insn_handler = emulate_alu_tests_imm;
+ } else {
+ /* ALU ops which write to Rd */
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+ }
return INSN_GOOD;
}
@@ -1192,6 +1287,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
/* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
if ((insn & 0x0ff000f0) == 0x068000b0) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
insn |= 0x00000001; /* Rm = r1 */
asi->insn[0] = insn;
@@ -1205,6 +1302,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
if ((insn & 0x0fa00030) == 0x06a00010 ||
(insn & 0x0fb000f0) == 0x06a00030) {
+ if (is_r15(insn, 12))
+ return INSN_REJECTED; /* Rd is PC */
insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
asi->insn[0] = insn;
asi->insn_handler = emulate_sat;
@@ -1213,57 +1312,101 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
/* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
/* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
if ((insn & 0x0ff00070) == 0x06b00030 ||
- (insn & 0x0ff000f0) == 0x06f000b0)
+ (insn & 0x0ff00070) == 0x06f00030)
return prep_emulate_rd12rm0(insn, asi);
+ /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */
/* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
/* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
/* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
/* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
/* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */
/* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
/* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
/* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
/* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
/* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
/* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */
/* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
/* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
/* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
/* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
/* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
/* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */
/* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
+ /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */
/* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
/* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
/* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
/* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
/* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */
/* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
/* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
/* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
/* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
/* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
/* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */
/* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
/* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
/* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
/* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
/* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
/* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
+ /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */
+ /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */
/* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
+ if ((insn & 0x0f800010) == 0x06000010) {
+ if ((insn & 0x00300000) == 0x00000000 ||
+ (insn & 0x000000e0) == 0x000000a0 ||
+ (insn & 0x000000e0) == 0x000000c0)
+ return INSN_REJECTED; /* Unallocated space */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
/* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
/* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
+ if ((insn & 0x0ff00030) == 0x06800010)
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
/* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */
+ /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */
/* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */
/* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */
/* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */
+ /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */
/* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */
/* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */
+ if ((insn & 0x0f8000f0) == 0x06800070) {
+ if ((insn & 0x00300000) == 0x00100000)
+ return INSN_REJECTED; /* Unallocated space */
+
+ if ((insn & 0x000f0000) == 0x000f0000)
+ return prep_emulate_rd12rm0(insn, asi);
+ else
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
+ /* Other instruction encodings aren't yet defined */
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1273,29 +1416,49 @@ space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
if ((insn & 0x0ff000f0) == 0x03f000f0)
return INSN_REJECTED;
- /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
- /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
- if ((insn & 0x0ff000f0) == 0x07800010)
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-
/* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
/* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
if ((insn & 0x0ff00090) == 0x07400010)
return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
/* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+ /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
/* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+ /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */
/* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
- /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
+ /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */
+ /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */
if ((insn & 0x0ff00090) == 0x07000010 ||
(insn & 0x0ff000d0) == 0x07500010 ||
- (insn & 0x0ff000d0) == 0x075000d0)
+ (insn & 0x0ff000f0) == 0x07800010) {
+
+ if ((insn & 0x0000f000) == 0x0000f000)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ else
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ }
+
+ /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ if ((insn & 0x0ff000d0) == 0x075000d0)
return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */
- /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
- /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */
+ /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */
+ if ((insn & 0x0fa00070) == 0x07a00050)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */
+ /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */
+ if ((insn & 0x0fe00070) == 0x07c00010) {
+
+ if ((insn & 0x0000000f) == 0x0000000f)
+ return prep_emulate_rd12_modify(insn, asi);
+ else
+ return prep_emulate_rd12rn0_modify(insn, asi);
+ }
+
+ return INSN_REJECTED;
}
static enum kprobe_insn __kprobes
@@ -1309,6 +1472,10 @@ space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
/* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
/* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+
+ if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12))
+ return INSN_REJECTED; /* LDRB into PC */
+
return prep_emulate_ldr_str(insn, asi);
}
@@ -1323,10 +1490,9 @@ space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
/* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
/* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
- asi->insn[0] = truecc_insn(insn);
asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
simulate_stm1_pc : simulate_ldm1stm1;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
static enum kprobe_insn __kprobes
@@ -1334,58 +1500,117 @@ space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
/* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
/* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
- asi->insn[0] = truecc_insn(insn);
asi->insn_handler = simulate_bbl;
- return INSN_GOOD;
+ return INSN_GOOD_NO_SLOT;
}
static enum kprobe_insn __kprobes
-space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ /* Coprocessor instructions... */
/* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
/* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
- insn &= 0xfff00fff;
- insn |= 0x00001000; /* Rn = r0, Rd = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
- return INSN_GOOD;
+ /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+
+ /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+
+ return INSN_REJECTED;
}
-static enum kprobe_insn __kprobes
-space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_eq(unsigned long cpsr)
{
- /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- insn &= 0xfff0ffff; /* Rn = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_ldcstc;
- return INSN_GOOD;
+ return cpsr & PSR_Z_BIT;
}
-static enum kprobe_insn __kprobes
-space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_ne(unsigned long cpsr)
{
- /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
- /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
- if ((insn & 0xfff000f0) == 0xe1200070 ||
- (insn & 0x0f000000) == 0x0f000000)
- return INSN_REJECTED;
+ return (~cpsr) & PSR_Z_BIT;
+}
- /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- if ((insn & 0x0f000010) == 0x0e000000) {
- asi->insn[0] = insn;
- asi->insn_handler = emulate_none;
- return INSN_GOOD;
- }
+static unsigned long __kprobes __check_cs(unsigned long cpsr)
+{
+ return cpsr & PSR_C_BIT;
+}
- /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
- return INSN_GOOD;
+static unsigned long __kprobes __check_cc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_mi(unsigned long cpsr)
+{
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_pl(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_vs(unsigned long cpsr)
+{
+ return cpsr & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_vc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_hi(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
}
+static unsigned long __kprobes __check_ls(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ge(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_lt(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_gt(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_le(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_al(unsigned long cpsr)
+{
+ return true;
+}
+
+static kprobe_check_cc * const condition_checks[16] = {
+ &__check_eq, &__check_ne, &__check_cs, &__check_cc,
+ &__check_mi, &__check_pl, &__check_vs, &__check_vc,
+ &__check_hi, &__check_ls, &__check_ge, &__check_lt,
+ &__check_gt, &__check_le, &__check_al, &__check_al
+};
+
/* Return:
* INSN_REJECTED If instruction is one not allowed to kprobe,
* INSN_GOOD If instruction is supported and uses instruction slot,
@@ -1401,133 +1626,45 @@ space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
enum kprobe_insn __kprobes
arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
{
+ asi->insn_check_cc = condition_checks[insn>>28];
asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
- if ((insn & 0xf0000000) == 0xf0000000) {
+ if ((insn & 0xf0000000) == 0xf0000000)
return space_1111(insn, asi);
- } else if ((insn & 0x0e000000) == 0x00000000) {
+ else if ((insn & 0x0e000000) == 0x00000000)
return space_cccc_000x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x02000000) {
+ else if ((insn & 0x0e000000) == 0x02000000)
return space_cccc_001x(insn, asi);
- } else if ((insn & 0x0f000010) == 0x06000010) {
+ else if ((insn & 0x0f000010) == 0x06000010)
return space_cccc_0110__1(insn, asi);
- } else if ((insn & 0x0f000010) == 0x07000010) {
+ else if ((insn & 0x0f000010) == 0x07000010)
return space_cccc_0111__1(insn, asi);
- } else if ((insn & 0x0c000000) == 0x04000000) {
+ else if ((insn & 0x0c000000) == 0x04000000)
return space_cccc_01xx(insn, asi);
- } else if ((insn & 0x0e000000) == 0x08000000) {
+ else if ((insn & 0x0e000000) == 0x08000000)
return space_cccc_100x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x0a000000) {
+ else if ((insn & 0x0e000000) == 0x0a000000)
return space_cccc_101x(insn, asi);
- } else if ((insn & 0x0fe00000) == 0x0c400000) {
-
- return space_cccc_1100_010x(insn, asi);
-
- } else if ((insn & 0x0e000000) == 0x0c000000) {
-
- return space_cccc_110x(insn, asi);
-
- }
-
- return space_cccc_111x(insn, asi);
+ return space_cccc_11xx(insn, asi);
}
void __init arm_kprobe_decode_init(void)
{
find_str_pc_offset();
}
-
-
-/*
- * All ARM instructions listed below.
- *
- * Instructions and their general purpose registers are given.
- * If a particular register may not use R15, it is prefixed with a "!".
- * If marked with a "*" means the value returned by reading R15
- * is implementation defined.
- *
- * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
- * TST: Rd, Rn, Rm, !Rs
- * BX: Rm
- * BLX(2): !Rm
- * BX: Rm (R15 legal, but discouraged)
- * BXJ: !Rm,
- * CLZ: !Rd, !Rm
- * CPY: Rd, Rm
- * LDC/2,STC/2 immediate offset & unindex: Rn
- * LDC/2,STC/2 immediate pre/post-indexed: !Rn
- * LDM(1/3): !Rn, register_list
- * LDM(2): !Rn, !register_list
- * LDR,STR,PLD immediate offset: Rd, Rn
- * LDR,STR,PLD register offset: Rd, Rn, !Rm
- * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
- * LDR,STR immediate pre/post-indexed: Rd, !Rn
- * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
- * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
- * LDRB,STRB immediate offset: !Rd, Rn
- * LDRB,STRB register offset: !Rd, Rn, !Rm
- * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
- * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
- * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
- * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
- * LDREX: !Rd, !Rn
- * MCR/2: !Rd
- * MCRR/2,MRRC/2: !Rd, !Rn
- * MLA: !Rd, !Rn, !Rm, !Rs
- * MOV: Rd
- * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
- * MRS,MSR: !Rd
- * MUL: !Rd, !Rm, !Rs
- * PKH{BT,TB}: !Rd, !Rn, !Rm
- * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
- * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
- * REV/16/SH: !Rd, !Rm
- * RFE: !Rn
- * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
- * SEL: !Rd, !Rn, !Rm
- * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
- * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
- * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
- * SSAT/16: !Rd, !Rm
- * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
- * STRT immediate pre/post-indexed: Rd*, !Rn
- * STRT register pre/post-indexed: Rd*, !Rn, !Rm
- * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
- * STREX: !Rd, !Rn, !Rm
- * SWP/B: !Rd, !Rn, !Rm
- * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
- * {S,U}XT{B,B16,H}: !Rd, !Rm
- * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
- * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
- *
- * May transfer control by writing R15 (possible mode changes or alternate
- * mode accesses marked by "*"):
- * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
- * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
- *
- * Instructions that do not take general registers, nor transfer control:
- * CDP/2, SETEND, SRS*
- */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 2ba7deb3072..1656c87501c 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
regs->ARM_pc += 4;
- p->ainsn.insn_handler(p, regs);
+ if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
+ p->ainsn.insn_handler(p, regs);
}
/*
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 31a316c1777..0f107dcb034 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/leds.h>
@@ -69,36 +70,37 @@ static ssize_t leds_store(struct sys_device *dev,
static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-static int leds_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_class leds_sysclass = {
+ .name = "leds",
+};
+
+static struct sys_device leds_device = {
+ .id = 0,
+ .cls = &leds_sysclass,
+};
+
+static int leds_suspend(void)
{
leds_event(led_stop);
return 0;
}
-static int leds_resume(struct sys_device *dev)
+static void leds_resume(void)
{
leds_event(led_start);
- return 0;
}
-static int leds_shutdown(struct sys_device *dev)
+static void leds_shutdown(void)
{
leds_event(led_halted);
- return 0;
}
-static struct sysdev_class leds_sysclass = {
- .name = "leds",
+static struct syscore_ops leds_syscore_ops = {
.shutdown = leds_shutdown,
.suspend = leds_suspend,
.resume = leds_resume,
};
-static struct sys_device leds_device = {
- .id = 0,
- .cls = &leds_sysclass,
-};
-
static int __init leds_init(void)
{
int ret;
@@ -107,6 +109,8 @@ static int __init leds_init(void)
ret = sysdev_register(&leds_device);
if (ret == 0)
ret = sysdev_create_file(&leds_device, &attr_event);
+ if (ret == 0)
+ register_syscore_ops(&leds_syscore_ops);
return ret;
}
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 69cfee0fe00..139e3c82736 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -221,7 +221,7 @@ again:
prev_raw_count &= armpmu->max_period;
if (overflow)
- delta = armpmu->max_period - prev_raw_count + new_raw_count;
+ delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
else
delta = new_raw_count - prev_raw_count;
@@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
tail = (struct frame_tail __user *)regs->ARM_fp - 1;
- while (tail && !((unsigned long)tail & 0x3))
+ while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+ tail && !((unsigned long)tail & 0x3))
tail = user_backtrace(tail, entry);
}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 94bbedbed63..5e1e5419722 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
if (clone_flags & CLONE_SETTLS)
thread->tp_value = regs->ARM_r3;
+ thread_notify(THREAD_NOTIFY_COPY, thread);
+
return 0;
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 2bf27f364d0..8182f45ca49 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
#ifdef CONFIG_HAVE_HW_BREAKPOINT
case PTRACE_GETHBPREGS:
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
ret = ptrace_gethbpregs(child, addr,
(unsigned long __user *)data);
+ ptrace_put_breakpoints(child);
break;
case PTRACE_SETHBPREGS:
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
ret = ptrace_sethbpregs(child, addr,
(unsigned long __user *)data);
+ ptrace_put_breakpoints(child);
break;
#endif
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index cb839831764..0340224cf73 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
return err;
}
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
- regs->ARM_r0 = regs->ARM_ORIG_r0;
- regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
/*
* OK, we're invoking a handler
*/
static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
- struct pt_regs * regs, int syscall)
+ struct pt_regs * regs)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
@@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int ret;
/*
- * If we were from a system call, check for system call restarting...
- */
- if (syscall) {
- switch (regs->ARM_r0) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->ARM_r0 = -EINTR;
- break;
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->ARM_r0 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- setup_syscall_restart(regs);
- }
- }
-
- /*
* translate the signal
*/
if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
@@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
+ unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
struct k_sigaction ka;
siginfo_t info;
int signr;
@@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
if (!user_mode(regs))
return;
+ /*
+ * If we were from a system call, check for system call restarting...
+ */
+ if (syscall) {
+ continue_addr = regs->ARM_pc;
+ restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+ retval = regs->ARM_r0;
+
+ /*
+ * Prepare for system call restart. We do this here so that a
+ * debugger will see the already changed PSW.
+ */
+ switch (retval) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->ARM_r0 = regs->ARM_ORIG_r0;
+ regs->ARM_pc = restart_addr;
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
+ }
+ }
+
if (try_to_freeze())
goto no_signal;
+ /*
+ * Get the signal to deliver. When running under ptrace, at this
+ * point the debugger may change all our registers ...
+ */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
sigset_t *oldset;
+ /*
+ * Depending on the signal settings we may need to revert the
+ * decision to restart the system call. But skip this if a
+ * debugger has chosen to restart at a different PC.
+ */
+ if (regs->ARM_pc == restart_addr) {
+ if (retval == -ERESTARTNOHAND
+ || (retval == -ERESTARTSYS
+ && !(ka.sa.sa_flags & SA_RESTART))) {
+ regs->ARM_r0 = -EINTR;
+ regs->ARM_pc = continue_addr;
+ }
+ }
+
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
- if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
}
no_signal:
- /*
- * No signal to deliver to the process - restart the syscall.
- */
if (syscall) {
- if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+ /*
+ * Handle restarting a different system call. As above,
+ * if a debugger has chosen to restart at a different PC,
+ * ignore the restart.
+ */
+ if (retval == -ERESTART_RESTARTBLOCK
+ && regs->ARM_pc == continue_addr) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
#endif
}
}
- if (regs->ARM_r0 == -ERESTARTNOHAND ||
- regs->ARM_r0 == -ERESTARTSYS ||
- regs->ARM_r0 == -ERESTARTNOINTR) {
- setup_syscall_restart(regs);
- }
/* If there's no signal to deliver, we just put the saved sigmask
* back.
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8fe05ad932e..d439a8f4c07 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -376,6 +376,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
}
}
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+ smp_cross_call = fn;
+}
+
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_cross_call(mask, IPI_CALL_FUNC);
@@ -479,7 +486,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
{
}
-static void broadcast_timer_setup(struct clock_event_device *evt)
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
{
evt->name = "dummy_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT |
@@ -560,10 +567,7 @@ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
break;
case IPI_RESCHEDULE:
- /*
- * nothing more to do - eveything is
- * done on the interrupt return path
- */
+ scheduler_ipi();
break;
case IPI_CALL_FUNC:
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 7a576092291..40ee7e5045e 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
if (res == 0) {
/*
- * Barrier also required between aquiring a lock for a
+ * Barrier also required between acquiring a lock for a
* protected resource and accessing the resource. Inserted for
* same reason as above.
*/
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 4ad8da15ef2..af0aaebf4de 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid,
long err;
int i;
- if (nsops < 1)
+ if (nsops < 1 || nsops > SEMOPM)
return -EINVAL;
sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
if (!sops)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1ff46cabc7e..cb634c3e28e 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,7 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/profile.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/timer.h>
#include <linux/irq.h>
@@ -115,48 +115,37 @@ void timer_tick(void)
#endif
#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(struct sys_device *dev, pm_message_t state)
+static int timer_suspend(void)
{
- struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
- if (timer->suspend != NULL)
- timer->suspend();
+ if (system_timer->suspend)
+ system_timer->suspend();
return 0;
}
-static int timer_resume(struct sys_device *dev)
+static void timer_resume(void)
{
- struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
- if (timer->resume != NULL)
- timer->resume();
-
- return 0;
+ if (system_timer->resume)
+ system_timer->resume();
}
#else
#define timer_suspend NULL
#define timer_resume NULL
#endif
-static struct sysdev_class timer_sysclass = {
- .name = "timer",
+static struct syscore_ops timer_syscore_ops = {
.suspend = timer_suspend,
.resume = timer_resume,
};
-static int __init timer_init_sysfs(void)
+static int __init timer_init_syscore_ops(void)
{
- int ret = sysdev_class_register(&timer_sysclass);
- if (ret == 0) {
- system_timer->dev.cls = &timer_sysclass;
- ret = sysdev_register(&system_timer->dev);
- }
+ register_syscore_ops(&timer_syscore_ops);
- return ret;
+ return 0;
}
-device_initcall(timer_init_sysfs);
+device_initcall(timer_init_syscore_ops);
void __init time_init(void)
{
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f0000e188c8..d52eec268b4 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -234,7 +234,6 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
- sysfs_printk_last_file();
/* trap and error numbers are mostly meaningless on ARM */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
@@ -410,8 +409,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
struct thread_info *thread = current_thread_info();
siginfo_t info;
- if (current->personality != PER_LINUX &&
- current->personality != PER_LINUX_32BIT &&
+ if ((current->personality & PER_MASK) != PER_LINUX &&
thread->exec_domain->handler) {
thread->exec_domain->handler(n, regs);
return regs->ARM_r0;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 19390231a0e..2d299bf5d72 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
config ARCH_AT572D940HF
bool "AT572D940HF"
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 2e74a19874d..295e1e77fa6 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
.pullup_pin = AT91_PIN_PD9,
};
-/* FIXME: user dependant */
+/* FIXME: user dependent */
// static struct at91_cf_data __initdata carmeva_cf_data = {
// .det_pin = AT91_PIN_PB0,
// .rst_pin = AT91_PIN_PC5,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 1f9d3cb64c5..d8df59a3426 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -30,6 +30,11 @@
#include <mach/board.h>
#include "generic.h"
+static void __init at91eb01_init_irq(void)
+{
+ at91x40_init_interrupts(NULL);
+}
+
static void __init at91eb01_map_io(void)
{
at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
- .init_irq = at91x40_init_interrupts,
+ .init_irq = at91eb01_init_irq,
.map_io = at91eb01_map_io,
MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 27ac6f550fe..02182c16a02 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -102,7 +102,7 @@
#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
-#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
+#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */
#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
#define AT91_MCI_OVRE (1 << 30) /* Overrun */
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 3bef931d0b1..0700f212530 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -27,6 +27,7 @@
#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5 0x819a05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
+#define ARCH_EXID_AT91SAM9G15 0x00000000
+#define ARCH_EXID_AT91SAM9G35 0x00000001
+#define ARCH_EXID_AT91SAM9X35 0x00000002
+#define ARCH_EXID_AT91SAM9G25 0x00000003
+#define ARCH_EXID_AT91SAM9X25 0x00000004
+
static inline unsigned long at91_exid_identify(void)
{
return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9m11() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index ddeb6453675..056dc6674b6 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -208,7 +208,7 @@ extern void at91_gpio_resume(void);
/*-------------------------------------------------------------------------*/
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+/* wrappers for "new style" GPIO calls. the old AT91-specific ones should
* eventually be removed (along with this errno.h inclusion), and the
* gpio request/free calls should probably be implemented.
*/
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 73eb066d232..a604b9ebb50 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -169,6 +169,7 @@ MACHINE_START(BCMRING, "BCMRING")
/* Maintainer: Broadcom Corporation */
.fixup = bcmring_fixup,
.map_io = bcmring_map_io,
+ .init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 8fc2035759f..43eadbcc29e 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -28,8 +28,6 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
#include <linux/clkdev.h>
#include <mach/csp/mm_addr.h>
@@ -37,6 +35,7 @@
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -97,6 +96,35 @@ static struct clk dummy_apb_pclk = {
.mode = CLK_MODE_XTAL,
};
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+static struct clk sp804_timer012_clk = {
+ .name = "sp804-timer-0,1,2",
+ .type = CLK_TYPE_PRIMARY,
+ .mode = CLK_MODE_XTAL,
+ .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
+};
+
+static struct clk sp804_timer3_clk = {
+ .name = "sp804-timer-3",
+ .type = CLK_TYPE_PRIMARY,
+ .mode = CLK_MODE_XTAL,
+ .rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
+};
+
static struct clk_lookup lookups[] = {
{ /* Bus clock */
.con_id = "apb_pclk",
@@ -107,6 +135,18 @@ static struct clk_lookup lookups[] = {
}, { /* UART1 */
.dev_id = "uartb",
.clk = &uart_clk,
+ }, { /* SP804 timer 0 */
+ .dev_id = "sp804",
+ .con_id = "timer0",
+ .clk = &sp804_timer012_clk,
+ }, { /* SP804 timer 1 */
+ .dev_id = "sp804",
+ .con_id = "timer1",
+ .clk = &sp804_timer012_clk,
+ }, { /* SP804 timer 3 */
+ .dev_id = "sp804",
+ .con_id = "timer3",
+ .clk = &sp804_timer3_clk,
}
};
@@ -151,8 +191,6 @@ void __init bcmring_amba_init(void)
chipcHw_busInterfaceClockEnable(bus_clock);
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
@@ -162,170 +200,18 @@ void __init bcmring_amba_init(void)
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE MM_IO_BASE_TMR
-#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
-#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
-#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
-#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
-#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
-#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD (TIMER_INTERVAL)
-#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
-#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- unsigned long ctrl;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-
- ctrl = TIMER_CTRL_PERIODIC;
- ctrl |=
- TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
- TIMER_CTRL_ENABLE;
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* period set, and timer enabled in 'next_event' hook */
- ctrl = TIMER_CTRL_ONESHOT;
- ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- ctrl = 0;
- }
-
- writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-
- writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
- writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-
- return 0;
-}
-
-static struct clock_event_device timer0_clockevent = {
- .name = "timer0",
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = timer_set_mode,
- .set_next_event = timer_set_next_event,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &timer0_clockevent;
-
- writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction bcmring_timer_irq = {
- .name = "bcmring Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = bcmring_timer_interrupt,
-};
-
-static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
-{
- return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
-}
-
-static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
-{
- return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_bcmring_timer1 = {
- .name = "timer1",
- .rating = 200,
- .read = bcmring_get_cycles_timer1,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static struct clocksource clocksource_bcmring_timer3 = {
- .name = "timer3",
- .rating = 100,
- .read = bcmring_get_cycles_timer3,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR)
+#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20))
+#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40))
+#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
static int __init bcmring_clocksource_init(void)
{
/* setup timer1 as free-running clocksource */
- writel(0, TIMER1_VA_BASE + TIMER_CTRL);
- writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
- writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
- writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- TIMER1_VA_BASE + TIMER_CTRL);
-
- clocksource_register_khz(&clocksource_bcmring_timer1,
- TIMER1_FREQUENCY_MHZ * 1000);
+ sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
/* setup timer3 as free-running clocksource */
- writel(0, TIMER3_VA_BASE + TIMER_CTRL);
- writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
- writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
- writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- TIMER3_VA_BASE + TIMER_CTRL);
-
- clocksource_register_khz(&clocksource_bcmring_timer3,
- TIMER3_FREQUENCY_KHZ);
+ sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
return 0;
}
@@ -347,21 +233,16 @@ void __init bcmring_init_timer(void)
/*
* Make irqs happen for the system timer
*/
- setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
-
bcmring_clocksource_init();
- timer0_clockevent.mult =
- div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
- timer0_clockevent.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &timer0_clockevent);
- timer0_clockevent.min_delta_ns =
- clockevent_delta2ns(0xf, &timer0_clockevent);
-
- timer0_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&timer0_clockevent);
+ sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {
.init = bcmring_init_timer,
};
+
+void __init bcmring_init_early(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
index b197ba48e36..e0e02c48f9b 100644
--- a/arch/arm/mach-bcmring/core.h
+++ b/arch/arm/mach-bcmring/core.h
@@ -25,6 +25,7 @@
void __init bcmring_amba_init(void);
void __init bcmring_map_io(void);
void __init bcmring_init_irq(void);
+void __init bcmring_init_early(void);
extern struct sys_timer bcmring_timer;
#endif
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index 77f84b40dda..a1f328357aa 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config
/****************************************************************************/
/**
-* @brief Check the existance of pending descriptor
+* @brief Check the existence of pending descriptor
*
* This function confirmes if there is any pending descriptor in the chain
* to program the channel
@@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha
/**
* @brief Read data DMAed to memory
*
-* This function will read data that has been DMAed to memory while transfering from:
+* This function will read data that has been DMAed to memory while transferring from:
* - Memory to memory
* - Peripheral to memory
*
@@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat
/**
* @brief Sets channel specific user data
*
-* This function associates user data to a specif DMA channel
+* This function associates user data to a specific DMA channel
*
*/
/****************************************************************************/
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 8d1baf3f468..d87ad30dda3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring);
* Configures a DMA channel.
*
* @return
-* >= 0 - Initialization was successfull.
+* >= 0 - Initialization was successful.
*
* -EBUSY - Device is currently being used.
* -ENODEV - Device handed in is invalid.
@@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle)
/**
* Initializes all of the data structures associated with the DMA.
* @return
-* >= 0 - Initialization was successfull.
+* >= 0 - Initialization was successful.
*
* -EBUSY - Device is currently being used.
* -ENODEV - Device handed in is invalid.
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 6c8da2b9fc1..e6a1dc484ca 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati
/**
* @brief Read data DMA transferred to memory
*
-* This function will read data that has been DMAed to memory while transfering from:
+* This function will read data that has been DMAed to memory while transferring from:
* - Memory to memory
* - Peripheral to memory
*
@@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle *
/****************************************************************************/
/**
-* @brief Check the existance of pending descriptor
+* @brief Check the existence of pending descriptor
*
* This function confirmes if there is any pending descriptor in the chain
* to program the channel
@@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
/**
* @brief Sets channel specific user data
*
-* This function associates user data to a specif DMA channel
+* This function associates user data to a specific DMA channel
*
*/
/****************************************************************************/
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
index 70eaea866cf..161973385fa 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -180,7 +180,7 @@ typedef enum {
#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */
-/* Programable pin defines */
+/* Programmable pin defines */
#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
/* GPIO pin 0 - 60 */
#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
index c78833acb37..03238c29900 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void)
/****************************************************************************/
/**
-* @brief Lower layer funtion to enable/disable a clock of a certain device
+* @brief Lower layer function to enable/disable a clock of a certain device
*
* This function enables/disables a core clock
*
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
index e01fc4607c9..0aeb6a6fe7f 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -109,9 +109,9 @@
#define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM)
/* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
#define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */
#define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */
#define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */
/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
index 06a355481ea..0992842caa7 100644
--- a/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -88,7 +88,7 @@
/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
/* Enable wait pin during burst write or read */
#define REG_UMI_TCR_WAITEN 0x80000000
-/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */
+/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
#define REG_UMI_TCR_LOWFREQ 0x40000000
/* 1=synch write, 0=async write */
#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32f147998cd..c0deacae778 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
select MACH_DAVINCI_DM6467TEVM
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
depends on ARCH_DAVINCI_DM365
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
select GPIO_PCF857X
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
depends on ARCH_DAVINCI_DA850
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2aa79c54f98..606a6f27ed6 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -29,7 +29,7 @@
#include <mach/mux.h>
#include <mach/spi.h>
-#define MITYOMAPL138_PHY_ID "0:03"
+#define MITYOMAPL138_PHY_ID ""
#define FACTORY_CONFIG_MAGIC 0x012C0138
#define FACTORY_CONFIG_VERSION 0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
static struct platform_device mityomapl138_nandflash_device = {
.name = "davinci_nand",
- .id = 0,
+ .id = 1,
.dev = {
.platform_data = &mityomapl138_nandflash_data,
},
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c389ff1020..3e7be2de96d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -11,7 +11,7 @@
* DM644X-EVM board. It has:
* DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
* USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * Additionaly realtime clock, IR remote control receiver,
+ * Additionally realtime clock, IR remote control receiver,
* IR Blaster based on MSP430 (firmware although is different
* from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
* with PATA interface, two muxed red-green leds.
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 4a68c2b1ec1..41669ecc1f9 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -94,9 +94,7 @@ static int davinci_target(struct cpufreq_policy *policy,
if (freqs.old == freqs.new)
return ret;
- cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
- dev_driver_string(cpufreq.dev),
- "transition: %u --> %u\n", freqs.old, freqs.new);
+ dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
freqs.new, relation, &idx);
@@ -167,7 +165,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
/*
* Time measurement across the target() function yields ~1500-1800us
* time taken with no drivers on notification list.
- * Setting the latency to 2000 us to accomodate addition of drivers
+ * Setting the latency to 2000 us to accommodate addition of drivers
* to pre/post change notification list.
*/
policy->cpuinfo.transition_latency = 2000 * 1000;
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68fe4c289d7..b95b9196dee 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1123,7 +1123,7 @@ void __init da850_init(void)
* This helps keeping the peripherals on this domain insulated
* from CPU frequency changes caused by DVFS. The firmware sets
* both PLL0 and PLL1 to the same frequency so, there should not
- * be any noticible change even in non-DVFS use cases.
+ * be any noticeable change even in non-DVFS use cases.
*/
da850_set_async3_src(1);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b66718..58a02dc7b15 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -39,7 +39,8 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
-#define DA8XX_SPI1_BASE 0x01f0e000
+#define DA830_SPI1_BASE 0x01e12000
+#define DA850_SPI1_BASE 0x01f0e000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
static struct resource da8xx_spi1_resources[] = {
[0] = {
- .start = DA8XX_SPI1_BASE,
- .end = DA8XX_SPI1_BASE + SZ_4K - 1,
+ .start = DA830_SPI1_BASE,
+ .end = DA830_SPI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
da8xx_spi_pdata[instance].num_chipselect = len;
+ if (instance == 1 && cpu_is_davinci_da850()) {
+ da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+ da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+ }
+
return platform_device_register(&da8xx_spi_device[instance]);
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 76364d1345d..a3a94e9c937 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why cant' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk timer3_clk = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 9a2376b3137..4c82c271629 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why cant' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk_lookup dm644x_clks[] = {
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index cea6b897204..957fb87e832 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -4,7 +4,7 @@
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type. In addtion, if support for a given device is not
+ * device type. In addition, if support for a given device is not
* compiled in to the kernel, the macros return 0 so that
* resulting code can be optimized out.
*
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9f1befc5ac3..f8b7ea4f623 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,6 +24,9 @@
#define UART_SHIFT 2
+#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
@@ -34,7 +37,7 @@ davinci_uart_virt: .word 0
/* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
- ldreq \rp, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rp, =davinci_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt
ldr \rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt: .word 0
tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rv, =davinci_uart_phys
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_virt)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
ldrne \rv, =davinci_uart_virt
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 8051110b8ac..c9e6ce185a6 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -22,7 +22,7 @@
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
*/
-#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 180b8a9d0d2..a5a9ff70b19 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
/*
- * map discontiguous hw irq range to continous sw irq range:
+ * map discontiguous hw irq range to continuous sw irq range:
*
* IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
*/
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index 939728b38d4..be9266b10fd 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -18,7 +18,7 @@
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
-/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
/* GPIO bank sizes */
#define EXYNOS4_GPIO_A0_NR (8)
diff --git a/arch/arm/mach-exynos4/include/mach/smp.h b/arch/arm/mach-exynos4/include/mach/smp.h
deleted file mode 100644
index a463dcebcfd..00000000000
--- a/arch/arm/mach-exynos4/include/mach/smp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/smp.h
- *
- * Cloned from arch/arm/mach-realview/include/mach/smp.h
-*/
-
-#ifndef ASM_ARCH_SMP_H
-#define ASM_ARCH_SMP_H __FILE__
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index af82a8fbb68..14ac10b7ec0 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
/* update interrupt count buffer */
exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
- /* enable MCT tick interupt */
+ /* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 6d35878ec1a..c5e65a02be8 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -104,7 +105,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -147,6 +148,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 10d917d9e3a..8755ca8dd48 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
@@ -372,7 +373,27 @@ void exynos4_scu_enable(void __iomem *scu_base)
flush_cache_all();
}
-static int exynos4_pm_resume(struct sys_device *dev)
+static struct sysdev_driver exynos4_pm_driver = {
+ .add = exynos4_pm_add,
+};
+
+static __init int exynos4_pm_drvinit(void)
+{
+ unsigned int tmp;
+
+ s3c_pm_init();
+
+ /* All wakeup disable */
+
+ tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp |= ((0xFF << 8) | (0x1F << 1));
+ __raw_writel(tmp, S5P_WAKEUP_MASK);
+
+ return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+}
+arch_initcall(exynos4_pm_drvinit);
+
+static void exynos4_pm_resume(void)
{
/* For release retention */
@@ -394,27 +415,15 @@ static int exynos4_pm_resume(struct sys_device *dev)
/* enable L2X0*/
writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
#endif
-
- return 0;
}
-static struct sysdev_driver exynos4_pm_driver = {
- .add = exynos4_pm_add,
+static struct syscore_ops exynos4_pm_syscore_ops = {
.resume = exynos4_pm_resume,
};
-static __init int exynos4_pm_drvinit(void)
+static __init int exynos4_pm_syscore_init(void)
{
- unsigned int tmp;
-
- s3c_pm_init();
-
- /* All wakeup disable */
-
- tmp = __raw_readl(S5P_WAKEUP_MASK);
- tmp |= ((0xFF << 8) | (0x1F << 1));
- __raw_writel(tmp, S5P_WAKEUP_MASK);
-
- return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+ register_syscore_ops(&exynos4_pm_syscore_ops);
+ return 0;
}
-arch_initcall(exynos4_pm_drvinit);
+arch_initcall(exynos4_pm_syscore_init);
diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
index 1b3d3a2de95..e8d08bf8965 100644
--- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c
+++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
@@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
switch (width) {
case 8:
for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
- /* Data pin GPK1[3:6] to special-funtion 3 */
+ /* Data pin GPK1[3:6] to special-function 3 */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
case 4:
for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
- /* Data pin GPK0[3:6] to special-funtion 2 */
+ /* Data pin GPK0[3:6] to special-function 2 */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
index 85f9433d483..1e83f8cf236 100644
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ b/arch/arm/mach-exynos4/setup-sdhci.c
@@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
{
u32 ctrl2, ctrl3;
- /* don't need to alter anything acording to card-type */
+ /* don't need to alter anything according to card-type */
ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index bdd257921cf..46adca068f2 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -4,6 +4,7 @@ menu "Footbridge Implementations"
config ARCH_CATS
bool "CATS"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
@@ -59,6 +60,7 @@ config ARCH_EBSA285_HOST
config ARCH_NETWINDER
bool "NetWinder"
+ select CLKSRC_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 441c6ce0d55..7020f1a3fec 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -10,53 +10,16 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <linux/timex.h>
#include <asm/irq.h>
-
+#include <asm/i8253.h>
#include <asm/mach/time.h>
#include "common.h"
-#define PIT_MODE 0x43
-#define PIT_CH0 0x40
-
-#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
-
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- static int old_count;
- static u32 old_jifs;
- int count;
- u32 jifs;
-
- raw_local_irq_save(flags);
-
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- if (count > old_count && jifs == old_jifs)
- count = old_count;
-
- old_count = count;
- old_jifs = jifs;
-
- raw_local_irq_restore(flags);
-
- count = (PIT_LATCH - 1) - count;
-
- return (cycle_t)(jifs * PIT_LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
-};
+DEFINE_RAW_SPINLOCK(i8253_lock);
static void pit_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
@@ -121,7 +84,7 @@ static void __init isa_timer_init(void)
pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
- clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
+ clocksource_i8253_init();
setup_irq(pit_ce.irq, &pit_timer_irq);
clockevents_register_device(&pit_ce);
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index d701d32a07f..dfd18f3b50e 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -4,6 +4,7 @@ menu "Integrator Options"
config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms"
+ select CLKSRC_MMIO
select MIGHT_HAVE_PCI
help
Include support for the ARM(R) Integrator/AP and
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 980803ff348..2fbbdd5eac3 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -24,13 +24,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -43,7 +44,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -180,13 +180,13 @@ static void __init ap_init_irq(void)
#ifdef CONFIG_PM
static unsigned long ic_irq_enable;
-static int irq_suspend(struct sys_device *dev, pm_message_t state)
+static int irq_suspend(void)
{
ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
return 0;
}
-static int irq_resume(struct sys_device *dev)
+static void irq_resume(void)
{
/* disable all irq sources */
writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
@@ -194,33 +194,25 @@ static int irq_resume(struct sys_device *dev)
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
- return 0;
}
#else
#define irq_suspend NULL
#define irq_resume NULL
#endif
-static struct sysdev_class irq_class = {
- .name = "irq",
+static struct syscore_ops irq_syscore_ops = {
.suspend = irq_suspend,
.resume = irq_resume,
};
-static struct sys_device irq_device = {
- .id = 0,
- .cls = &irq_class,
-};
-
-static int __init irq_init_sysfs(void)
+static int __init irq_syscore_init(void)
{
- int ret = sysdev_class_register(&irq_class);
- if (ret == 0)
- ret = sysdev_register(&irq_device);
- return ret;
+ register_syscore_ops(&irq_syscore_ops);
+
+ return 0;
}
-device_initcall(irq_init_sysfs);
+device_initcall(irq_syscore_init);
/*
* Flash handling.
@@ -230,7 +222,7 @@ device_initcall(irq_init_sysfs);
#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-static int ap_flash_init(void)
+static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
@@ -247,7 +239,7 @@ static int ap_flash_init(void)
return 0;
}
-static void ap_flash_exit(void)
+static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
@@ -263,15 +255,14 @@ static void ap_flash_exit(void)
}
}
-static void ap_flash_set_vpp(int on)
+static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
}
-static struct flash_platform_data ap_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data ap_flash_data = {
.width = 4,
.init = ap_flash_init,
.exit = ap_flash_exit,
@@ -285,7 +276,7 @@ static struct resource cfi_flash_resource = {
};
static struct platform_device cfi_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ap_flash_data,
@@ -343,25 +334,9 @@ static void __init ap_init(void)
static unsigned long timer_reload;
-static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
-
-static cycle_t timersp_read(struct clocksource *cs)
-{
- return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
-}
-
-static struct clocksource clocksource_timersp = {
- .name = "timer2",
- .rating = 200,
- .read = timersp_read,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void integrator_clocksource_init(u32 khz)
{
- struct clocksource *cs = &clocksource_timersp;
- void __iomem *base = clksrc_base;
+ void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
u32 ctrl = TIMER_CTRL_ENABLE;
if (khz >= 1500) {
@@ -372,7 +347,8 @@ static void integrator_clocksource_init(u32 khz)
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
- clocksource_register_khz(cs, khz);
+ clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+ khz * 1000, 200, 16, clocksource_mmio_readl_down);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 9e3ce26023e..4eb03ab5cb4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -35,7 +36,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -229,17 +229,24 @@ static struct clk cp_auxclk = {
.vcoreg = CM_AUXOSC,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk_lookup cp_lookups[] = {
{ /* CLCD */
.dev_id = "mb:c0",
.clk = &cp_auxclk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
},
};
/*
* Flash handling.
*/
-static int intcp_flash_init(void)
+static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
@@ -250,7 +257,7 @@ static int intcp_flash_init(void)
return 0;
}
-static void intcp_flash_exit(void)
+static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
@@ -259,7 +266,7 @@ static void intcp_flash_exit(void)
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static void intcp_flash_set_vpp(int on)
+static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -271,8 +278,7 @@ static void intcp_flash_set_vpp(int on)
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static struct flash_platform_data intcp_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
@@ -286,7 +292,7 @@ static struct resource intcp_flash_resource = {
};
static struct platform_device intcp_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
@@ -476,8 +482,8 @@ static void __init intcp_timer_init(void)
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
- sp804_clocksource_init(TIMER2_VA_BASE);
- sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
+ sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
+ sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
}
static struct sys_timer cp_timer = {
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 773ea0c95b9..ba3dae352a2 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
/* This routine checks the status of the last configuration cycle. If an error
* was detected it returns >0, else it returns a 0. The errors being checked
* are parity, master abort, target abort (master and target). These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
* the discovery stage.
*/
static int iop13xx_atux_pci_status(int clear)
@@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = {
/* This routine checks the status of the last configuration cycle. If an error
* was detected it returns >0, else it returns a 0. The errors being checked
* are parity, master abort, target abort (master and target). These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
* the discovery stage.
*/
static int iop13xx_atue_pci_status(int clear)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index ed19bc31431..74ed81a3cb1 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -419,26 +419,14 @@ static void notrace ixp4xx_update_sched_clock(void)
/*
* clocksource
*/
-static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
-{
- return *IXP4XX_OSTS;
-}
-
-static struct clocksource clocksource_ixp4xx = {
- .name = "OSTS",
- .rating = 200,
- .read = ixp4xx_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
- clocksource_register_hz(&clocksource_ixp4xx, ixp4xx_timer_freq);
+ clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
+ clocksource_mmio_readl_up);
}
/*
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index f781164e623..24294b2bc46 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -15,7 +15,7 @@
/****************************************************************************
* 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
+ * partitions on the device because we want to keep compatibility with
* the QNAP firmware.
* Layout as used by QNAP:
* 0x00000000-0x00080000 : "U-Boot"
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index e76d41bb705..b9c80597b7b 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -41,7 +41,7 @@
* DRAM clocking and refresh are slightly different for systems with DDR
* DRAM or regular SDRAM devices. If SDRAM is used in the system, the
* SDRAM will still be accessible in direct-run mode. In DDR based systems,
- * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * a transition to direct-run mode will stop all DDR accesses (no clocks).
* Because of this, the code to switch power modes and the code to enter
* and exit DRAM self-refresh modes must not be executed in DRAM. A small
* section of IRAM is used instead for this.
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 6162ac308c2..b42c909bbee 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -31,19 +31,6 @@
#include <mach/platform.h>
#include "common.h"
-static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
-{
- return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
-}
-
-static struct clocksource lpc32xx_clksrc = {
- .name = "lpc32xx_clksrc",
- .rating = 300,
- .read = lpc32xx_clksrc_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int lpc32xx_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
@@ -170,7 +157,9 @@ static void __init lpc32xx_timer_init(void)
__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- clocksource_register_hz(&lpc32xx_clksrc, clkrate);
+
+ clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+ "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
}
struct sys_timer lpc32xx_timer = {
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index ee8b02ed801..7bfb827f3fe 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -10,7 +10,7 @@
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-#define NR_BUILTIN_GPIO (192)
+#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 4621067c772..713be155a44 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -8,6 +8,15 @@
#define MFP_DRIVE_MEDIUM (0x2 << 13)
#define MFP_DRIVE_FAST (0x3 << 13)
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+
+#define MFP_CFG(pin, af) \
+ (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index aeb9ae23e6c..99833b9485c 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -9,7 +9,7 @@
* 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
* 2008-10-08: Bin Yang <bin.yang@marvell.com>
*
- * The timers module actually includes three timers, each timer with upto
+ * The timers module actually includes three timers, each timer with up to
* three match comparators. Timer #0 is used here in free-running mode as
* the clock source, and match comparator #1 used as clock event device.
*
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index 7ffbd987eb5..805d4ee53f7 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
}
}
- /* Set wait states for CPU inbetween frequency changes */
+ /* Set wait states for CPU between frequency changes */
reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 7f568611547..6a96911b0ad 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -160,10 +160,7 @@ static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
static void __init qsd8x50_init_mmc(void)
{
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
- vreg_mmc = vreg_get(NULL, "gp6");
- else
- vreg_mmc = vreg_get(NULL, "gp5");
+ vreg_mmc = vreg_get(NULL, "gp5");
if (IS_ERR(vreg_mmc)) {
pr_err("vreg get for vreg_mmc failed (%ld)\n",
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
deleted file mode 100644
index 3c01000ecc8..00000000000
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SMP_H
-#define __ASM_ARCH_MSM_SMP_H
-
-#include <asm/hardware/gic.h>
-
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 0f427bc9444..2034098cf01 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -119,7 +119,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -151,6 +151,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < NR_CPUS; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index cfa808dd489..232f97a0450 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock);
* @id: command to be executed
* @buf: buffer returned from scm_get_command_buffer()
*
- * An SCM command is layed out in memory as follows:
+ * An SCM command is laid out in memory as follows:
*
* ------------------- <--- struct scm_command
* | command header |
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 56f920c55b6..38b95e949d1 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -269,7 +269,7 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
/* Use existing clock_event for cpu 0 */
if (!smp_processor_id())
- return;
+ return 0;
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index 2cf390fbd98..47a69cbc31a 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id,
+ MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY,
+ .init = vpr200_usbh_init,
+ .portsc = MXC_EHCI_MODE_SERIAL,
};
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 10a1bea1054..6206b1191fe 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
.wakeup = wake, \
}
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4522fbb235d..edacefac227 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -17,6 +17,16 @@ config SOC_IMX28
comment "MXS platforms:"
+config MACH_STMP378X_DEVB
+ bool "Support STMP378x_devb Platform"
+ select SOC_IMX23
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ help
+ Include support for STMP378x-devb platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 2f1f6141ca7..58e892376bf 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 1ad97fed1e9..5dcc59d5b9e 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
unsigned long diff, parent_rate, calc_rate; \
int i; \
\
- parent_rate = clk_get_rate(clk->parent); \
div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
bm_busy = BM_CLKCTRL_##dr##_BUSY; \
\
if (clk->parent == &ref_xtal_clk) { \
+ parent_rate = clk_get_rate(clk->parent); \
div = DIV_ROUND_UP(parent_rate, rate); \
if (clk == &cpu_clk) { \
div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \
@@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
if (div == 0 || div > div_max) \
return -EINVAL; \
} else { \
+ /* \
+ * hack alert: this block modifies clk->parent, too, \
+ * so the base to use it the grand parent. \
+ */ \
+ parent_rate = clk_get_rate(clk->parent->parent); \
rate >>= PARENT_RATE_SHIFT; \
parent_rate >>= PARENT_RATE_SHIFT; \
diff = parent_rate; \
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
new file mode 100644
index 00000000000..7f38d82b69a
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -0,0 +1,120 @@
+/*
+ * board setup for STMP378x-Development-Board
+ *
+ * based on mx23evk board setup and information gained form the original
+ * plat-stmp based board setup, now converted to mach-mxs.
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx23.h>
+
+#include "devices-mx23.h"
+
+#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
+#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
+
+#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
+
+static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
+ /* duart (extended setup missing in old boardcode, too */
+ MX23_PAD_PWM0__DUART_RX,
+ MX23_PAD_PWM1__DUART_TX,
+
+ /* auart */
+ MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
+
+ /* mmc */
+ MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_CMD__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_SSP1_SCK__SSP1_SCK |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
+ MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
+};
+
+static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
+ .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ {
+ .modalias = "enc28j60",
+ .max_speed_hz = 6 * 1000 * 1000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = NULL,
+ },
+#endif
+};
+
+static void __init stmp378x_dvb_init(void)
+{
+ int ret;
+
+ mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
+ ARRAY_SIZE(stmp378x_dvb_pads));
+
+ mx23_add_duart();
+ mx23_add_auart0();
+
+ /* power on mmc slot */
+ ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
+ GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
+ if (ret)
+ pr_warn("could not power mmc (%d)\n", ret);
+
+ mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
+
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+
+static void __init stmp378x_dvb_timer_init(void)
+{
+ mx23_clocks_init();
+}
+
+static struct sys_timer stmp378x_dvb_timer = {
+ .init = stmp378x_dvb_timer_init,
+};
+
+MACHINE_START(STMP378X, "STMP378X")
+ .map_io = mx23_map_io,
+ .init_irq = mx23_init_irq,
+ .init_machine = stmp378x_dvb_init,
+ .timer = &stmp378x_dvb_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 13647f30186..cace0d2e5a5 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -101,11 +101,6 @@ static cycle_t timrotv1_get_cycles(struct clocksource *cs)
& 0xffff0000) >> 16);
}
-static cycle_t timrotv2_get_cycles(struct clocksource *cs)
-{
- return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
-}
-
static int timrotv1_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
@@ -230,8 +225,8 @@ static int __init mxs_clockevent_init(struct clk *timer_clk)
static struct clocksource clocksource_mxs = {
.name = "mxs_timer",
.rating = 200,
- .read = timrotv2_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
+ .read = timrotv1_get_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -239,12 +234,11 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- if (timrot_is_v1()) {
- clocksource_mxs.read = timrotv1_get_cycles;
- clocksource_mxs.mask = CLOCKSOURCE_MASK(16);
- }
-
- clocksource_register_hz(&clocksource_mxs, c);
+ if (timrot_is_v1())
+ clocksource_register_hz(&clocksource_mxs, c);
+ else
+ clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+ "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
return 0;
}
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index f12f22d09b6..e24c141ba48 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -104,19 +104,6 @@ static struct irqaction netx_timer_irq = {
.handler = netx_timer_interrupt,
};
-cycle_t netx_get_cycles(struct clocksource *cs)
-{
- return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
-}
-
-static struct clocksource clocksource_netx = {
- .name = "netx_timer",
- .rating = 200,
- .read = netx_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
/*
* Set up timer interrupt
*/
@@ -150,7 +137,8 @@ static void __init netx_timer_init(void)
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
- clocksource_register_hz(&clocksource_netx, CLOCK_TICK_RATE);
+ clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
+ "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
netx_clockevent.shift);
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 927d5a18176..c1c5fb6a5b4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -79,7 +79,7 @@
/*
- * Register useage
+ * Register usage
* r8 - temporary
* r9 - the driver buffer
* r10 - temporary
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d41fe2d0616..0ad781db4e6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -399,7 +399,7 @@ static void __init omap_sx1_init(void)
sx1_mmc_init();
/* turn on USB power */
- /* sx1_setusbpower(1); cant do it here because i2c is not ready */
+ /* sx1_setusbpower(1); can't do it here because i2c is not ready */
gpio_request(1, "A_IRDA_OFF");
gpio_request(11, "A_SWITCH");
gpio_request(15, "A_USB_ON");
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b0f4c231595..36f26c3fa25 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {}
* Claiming GPIOs, and setting their direction and initial values, is the
* responsibility of the device drivers. So is responding to probe().
*
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
* kept out of drivers as much as possible. In particular, pin setup
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index acd16166640..1749cb37dda 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -13,7 +13,7 @@
#include <plat/tc.h>
#include <plat/flash.h>
-void omap1_set_vpp(struct map_info *map, int enable)
+void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
u32 l;
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 7a2df29400c..23eed0035ed 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -31,7 +31,7 @@
#endif
/*
- * These are the offsets from the begining of the fiq_buffer. They are put here
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
* since the buffer and header need to be accessed by drivers servicing devices
* which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
*/
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 6588c22b8a6..fe31d933f0e 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -24,75 +24,50 @@
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
{
- struct clk *iclk, *fclk;
- int ret = 0;
+ int ret;
dev_dbg(dev, "%s\n", __func__);
ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_disable(fclk);
- clk_put(fclk);
- }
-
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_disable(iclk);
- clk_put(iclk);
+ ret = pm_runtime_clk_suspend(dev);
+ if (ret) {
+ pm_generic_runtime_resume(dev);
+ return ret;
}
return 0;
-};
+}
static int omap1_pm_runtime_resume(struct device *dev)
{
- struct clk *iclk, *fclk;
-
dev_dbg(dev, "%s\n", __func__);
- iclk = clk_get(dev, "ick");
- if (!IS_ERR(iclk)) {
- clk_enable(iclk);
- clk_put(iclk);
- }
+ pm_runtime_clk_resume(dev);
+ return pm_generic_runtime_resume(dev);
+}
- fclk = clk_get(dev, "fck");
- if (!IS_ERR(fclk)) {
- clk_enable(fclk);
- clk_put(fclk);
- }
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = omap1_pm_runtime_suspend,
+ .runtime_resume = omap1_pm_runtime_resume,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
- return pm_generic_runtime_resume(dev);
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = &default_power_domain,
+ .con_ids = { "ick", "fck", NULL, },
};
static int __init omap1_pm_runtime_init(void)
{
- const struct dev_pm_ops *pm;
- struct dev_pm_ops *omap_pm;
-
if (!cpu_class_is_omap1())
return -ENODEV;
- pm = platform_bus_get_pm_ops();
- if (!pm) {
- pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
- __func__);
- return -ENODEV;
- }
-
- omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
- if (!omap_pm) {
- pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
- __func__);
- return -ENOMEM;
- }
-
- omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
- omap_pm->runtime_resume = omap1_pm_runtime_resume;
-
- platform_bus_set_pm_ops(omap_pm);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 6885d2fac18..03e1e1062ad 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -68,49 +68,50 @@ typedef struct {
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
-((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long notrace omap_mpu_timer_read(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- return timer->read_tim;
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ return readl(&timer->read_tim);
}
static inline void omap_mpu_set_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl | MPU_TIMER_AR;
+ writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_remove_autoreset(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
int autoreset)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+ unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
- if (autoreset) timerflags |= MPU_TIMER_AR;
+ if (autoreset)
+ timerflags |= MPU_TIMER_AR;
- timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+ writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
udelay(1);
- timer->load_tim = load_val;
+ writel(load_val, &timer->load_tim);
udelay(1);
- timer->cntl = timerflags;
+ writel(timerflags, &timer->cntl);
}
static inline void omap_mpu_timer_stop(int nr)
{
- volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
- timer->cntl &= ~MPU_TIMER_ST;
+ writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
}
/*
@@ -189,38 +190,11 @@ static __init void omap_init_mpu_timer(unsigned long rate)
* ---------------------------------------------------------------------------
*/
-static unsigned long omap_mpu_timer2_overflows;
-
-static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
-{
- omap_mpu_timer2_overflows++;
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap_mpu_timer2_irq = {
- .name = "mpu_timer2",
- .flags = IRQF_DISABLED,
- .handler = omap_mpu_timer2_interrupt,
-};
-
-static cycle_t mpu_read(struct clocksource *cs)
-{
- return ~omap_mpu_timer_read(1);
-}
-
-static struct clocksource clocksource_mpu = {
- .name = "mpu_timer2",
- .rating = 300,
- .read = mpu_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static DEFINE_CLOCK_DATA(cd);
static inline unsigned long long notrace _omap_mpu_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -238,21 +212,22 @@ static unsigned long long notrace omap_mpu_sched_clock(void)
static void notrace mpu_update_sched_clock(void)
{
- u32 cyc = mpu_read(&clocksource_mpu);
+ u32 cyc = ~omap_mpu_timer_read(1);
update_sched_clock(&cd, cyc, (u32)~0);
}
static void __init omap_init_clocksource(unsigned long rate)
{
+ omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
- setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
omap_mpu_timer_start(1, ~0, 1);
init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
- if (clocksource_register_hz(&clocksource_mpu, rate))
- printk(err, clocksource_mpu.name);
+ if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
+ 300, 32, clocksource_mmio_readl_down))
+ printk(err, "mpu_timer2");
}
static void __init omap_mpu_timer_init(void)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a45cd640968..66dfbccacd2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -59,16 +59,16 @@ endif
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
- cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
+ cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
-AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o += -DDEBUG
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5f8a2fd0633..34cf982b967 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -696,7 +696,7 @@ static void __init igep2_init(void)
igep2_init_smsc911x();
/*
- * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+ * WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep2_wlan_bt_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index b10db0e6ee6..2cf86c3cb1a 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -440,7 +440,7 @@ static void __init igep3_init(void)
igep3_leds_init();
/*
- * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+ * WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep3_wifi_bt_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index e964895b80e..f8ba20a14e6 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -141,14 +141,19 @@ static void __init rx51_init(void)
static void __init rx51_map_io(void)
{
omap2_set_globals_3xxx();
- rx51_video_mem_init();
omap34xx_map_common_io();
}
+static void __init rx51_reserve(void)
+{
+ rx51_video_mem_init();
+ omap_reserve();
+}
+
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.boot_params = 0x80000100,
- .reserve = omap_reserve,
+ .reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
.init_irq = omap_init_irq,
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index b2b1e37bb6b..d6e34dd9e7e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
+ clk->rate = rate;
return 0;
}
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 276992d3b7f..8c965671b4d 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
- CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
- CLK("omapdss_dss", "fck", &dss_fck, CK_443X),
- /*
- * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
- * with OMAP2/3.
- */
- CLK("omapdss_dss", "ick", &dummy_ck, CK_443X),
+ CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
+ CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
CLK(NULL, "emif2_fck", &emif2_fck, CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ab878545bd9..6cb6c03293d 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
* clkdm_init - set up the clockdomain layer
* @clkdms: optional pointer to an array of clockdomains to register
* @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
*
* Set up internal state. If a pointer to an array of clockdomains
* @clkdms was supplied, loop through the list of clockdomains,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 85b3dce6564..5823584d9cd 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -125,7 +125,7 @@ struct clockdomain {
};
/**
- * struct clkdm_ops - Arch specfic function implementations
+ * struct clkdm_ops - Arch specific function implementations
* @clkdm_add_wkdep: Add a wakeup dependency between clk domains
* @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
* @clkdm_read_wkdep: Read wakeup dependency state between clk domains
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 9d0dec806e9..38830d8d478 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -247,6 +247,7 @@ struct omap3_cm_regs {
u32 per_cm_clksel;
u32 emu_cm_clksel;
u32 emu_cm_clkstctrl;
+ u32 pll_cm_autoidle;
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
cm_context.emu_cm_clkstctrl =
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+ * In this case, even though this register has been saved in
+ * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+ * by ourselves. So, we need to save it anyway.
+ */
+ cm_context.pll_cm_autoidle =
+ omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
cm_context.pll_cm_autoidle2 =
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
CM_CLKSEL1);
omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
OMAP2_CM_CLKSTCTRL);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+ * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+ */
+ omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+ CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 69527941902..da53ba3917c 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_block_contents.cm_clken_pll =
omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ /*
+ * As per erratum i671, ROM code does not respect the PER DPLL
+ * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+ * Then, in anycase, clear these bits to avoid extra latencies.
+ */
prcm_block_contents.cm_autoidle_pll =
- omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+ omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+ ~OMAP3430_AUTO_PERIPH_DPLL_MASK;
prcm_block_contents.cm_clksel1_pll =
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
prcm_block_contents.cm_clksel2_pll =
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a44c5230340..1c240eff391 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
/**
* omap3_cpuidle_update_states() - Update the cpuidle states
- * @mpu_deepest_state: Enable states upto and including this for mpu domain
- * @core_deepest_state: Enable states upto and including this for core domain
+ * @mpu_deepest_state: Enable states up to and including this for mpu domain
+ * @core_deepest_state: Enable states up to and including this for core domain
*
* This goes through the list of states available and enables and disables the
* validity of C states based on deepest state that can be achieved for the
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 84d1b735fe8..7b855856459 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
ARRAY_SIZE(omap_keyboard_latency), 0);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n",
+ WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
return PTR_ERR(od);
}
@@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
od = omap_device_build(name, spi_num, oh, pdata,
sizeof(*pdata), omap_mcspi_latency,
ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
+ WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -725,7 +725,7 @@ static int __init omap_init_wdt(void)
od = omap_device_build(dev_name, id, oh, NULL, 0,
omap_wdt_latency,
ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+ WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 34922b2d2e3..c9ff0e79703 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
kfree(p);
if (IS_ERR(od)) {
- pr_err("%s: Cant build omap_device for %s:%s.\n",
+ pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 413de18c1d2..9529842ae05 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
kfree(pdata);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n",
+ WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 137e1a5f3d8..b2f30bed5a2 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name);
+ WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
}
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index de441c05a6a..e4bd8761973 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -33,4 +33,11 @@ extern void __iomem *gic_dist_base_addr;
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
#endif
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 565b9064a32..4a6ef6ab845 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
ARRAY_SIZE(omap2_mcbsp_latency), false);
kfree(pdata);
if (IS_ERR(od)) {
- pr_err("%s: Cant build omap_device for %s:%s.\n", __func__,
+ pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index bb043cbb388..a4ab1e36431 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
seq_printf(s, "/* %s */\n", m->muxnames[mode]);
/*
- * XXX: Might be revisited to support differences accross
+ * XXX: Might be revisited to support differences across
* same OMAP generation.
*/
seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
index adbea0d03e0..9fd93149ebd 100644
--- a/arch/arm/mach-omap2/mux2430.h
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -22,7 +22,7 @@
* absolute addresses. The name in the macro is the mode-0 name of
* the pin. NOTE: These registers are 8-bits wide.
*
- * Note that these defines use SDMMC instead of MMC for compability
+ * Note that these defines use SDMMC instead of MMC for compatibility
* with signal names used in 3630.
*/
#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index b66cfe8bc46..ecfe93c4b58 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
@@ -63,7 +64,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
/*
* Now the secondary core is starting up let it run its
@@ -118,6 +119,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 8eb3ce1bbfb..c4d0ae87d62 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
static struct omap_hwmod omap2420_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs),
.main_clk = "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
static struct omap_hwmod omap2420_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs),
.main_clk = "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
static struct omap_hwmod omap2420_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs),
.main_clk = "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
static struct omap_hwmod omap2420_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs),
.main_clk = "gpios_fck",
@@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a860fb5024c..9682dd519f8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
* I2CHS IP's do not follow the usual pattern.
* prcm_reg_id alone cannot be used to program
* the iclk and fclk. Needs to be handled using
- * additonal flags when clk handling is moved
+ * additional flags when clk handling is moved
* to hwmod framework.
*/
.module_offs = CORE_MOD,
@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
static struct omap_hwmod omap2430_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs),
.main_clk = "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
static struct omap_hwmod omap2430_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs),
.main_clk = "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
static struct omap_hwmod omap2430_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs),
.main_clk = "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
static struct omap_hwmod omap2430_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs),
.main_clk = "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
static struct omap_hwmod omap2430_gpio5_hwmod = {
.name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs),
.main_clk = "gpio5_fck",
@@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b98e2dfcba2..909a84de668 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
static struct omap_hwmod omap3xxx_gpio1_hwmod = {
.name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs),
.main_clk = "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
static struct omap_hwmod omap3xxx_gpio2_hwmod = {
.name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs),
.main_clk = "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
static struct omap_hwmod omap3xxx_gpio3_hwmod = {
.name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs),
.main_clk = "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
static struct omap_hwmod omap3xxx_gpio4_hwmod = {
.name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs),
.main_clk = "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
static struct omap_hwmod omap3xxx_gpio5_hwmod = {
.name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs),
.main_clk = "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.name = "gpio6",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio6_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs),
.main_clk = "gpio6_ick",
@@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3e88dd3f8ef..abc548a0c98 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
{
.pa_start = 0x4a056000,
- .pa_end = 0x4a0560ff,
+ .pa_end = 0x4a056fff,
.flags = ADDR_TYPE_RT
},
};
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 5f2da7565b6..4321e793892 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
/* No timeout error for debug sources */
}
- base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
-
/* identify the error source */
for (err_source = 0; !(status & (1 << err_source)); err_source++)
;
+
+ base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index e2e605fe913..05f6abc96b0 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
else
/*
* Enable VBUS Valid, AValid and IDDIG
- * high impedence
+ * high impedance
*/
__raw_writel(IDDIG | AVALID | VBUSVALID,
ctrl_base + USBOTGHS_CONTROL);
} else {
- /* Enable session END and IDIG to high impedence. */
+ /* Enable session END and IDIG to high impedance. */
__raw_writel(SESSEND | IDDIG, ctrl_base +
USBOTGHS_CONTROL);
}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 0a8e74e3e81..07d6140baa9 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -308,7 +308,7 @@ int __init omap3_twl_init(void)
* Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
* in those scenarios this bit is to be cleared (enable = false).
*
- * Returns 0 on sucess, error is returned if I2C read/write fails.
+ * Returns 0 on success, error is returned if I2C read/write fails.
*/
int __init omap3_twl_set_sr_bit(bool enable)
{
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 30af3351c2d..49486f522dc 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
if (cpu_is_omap44xx()) {
_init_omap_device("l3_main_1", &l3_dev);
_init_omap_device("dsp", &dsp_dev);
+ _init_omap_device("iva", &iva_dev);
} else {
_init_omap_device("l3_main", &l3_dev);
}
diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c
deleted file mode 100644
index 5acd2ab298b..00000000000
--- a/arch/arm/mach-omap2/pm_bus.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Runtime PM support code for OMAP
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#ifdef CONFIG_PM_RUNTIME
-static int omap_pm_runtime_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int r, ret = 0;
-
- dev_dbg(dev, "%s\n", __func__);
-
- ret = pm_generic_runtime_suspend(dev);
-
- if (!ret && dev->parent == &omap_device_parent) {
- r = omap_device_idle(pdev);
- WARN_ON(r);
- }
-
- return ret;
-};
-
-static int omap_pm_runtime_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int r;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (dev->parent == &omap_device_parent) {
- r = omap_device_enable(pdev);
- WARN_ON(r);
- }
-
- return pm_generic_runtime_resume(dev);
-};
-#else
-#define omap_pm_runtime_suspend NULL
-#define omap_pm_runtime_resume NULL
-#endif /* CONFIG_PM_RUNTIME */
-
-static int __init omap_pm_runtime_init(void)
-{
- const struct dev_pm_ops *pm;
- struct dev_pm_ops *omap_pm;
-
- pm = platform_bus_get_pm_ops();
- if (!pm) {
- pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
- __func__);
- return -ENODEV;
- }
-
- omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
- if (!omap_pm) {
- pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
- __func__);
- return -ENOMEM;
- }
-
- omap_pm->runtime_suspend = omap_pm_runtime_suspend;
- omap_pm->runtime_resume = omap_pm_runtime_resume;
-
- platform_bus_set_pm_ops(omap_pm);
-
- return 0;
-}
-core_initcall(omap_pm_runtime_init);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 49c6513e90d..9af08473bf1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
/**
* pwrdm_init - set up the powerdomain layer
* @pwrdm_list: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
*
* Loop through the array of powerdomains @pwrdm_list, registering all
* that are available on the current CPU. If pwrdm_list is supplied
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 027f40bd235..d23d979b9c3 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -121,7 +121,7 @@ struct powerdomain {
};
/**
- * struct pwrdm_ops - Arch specfic function implementations
+ * struct pwrdm_ops - Arch specific function implementations
* @pwrdm_set_next_pwrst: Set the target power state for a pd
* @pwrdm_read_next_pwrst: Read the target power state set for a pd
* @pwrdm_read_pwrst: Read the current power state of a pd
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 9c9c113788b..469a920a74d 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
/*
* The USBTLL Save-and-Restore mechanism is broken on
- * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
* needs to be disabled on these chips.
* Refer: 3430 errata ID i459 and 3630 errata ID i579
*
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 8f674c9442b..13e24f913dd 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currenly this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6facf7becf..0c1552d9d99 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
sys_clk_speed /= 1000;
/* Generic voltage parameters */
- vdd->curr_volt = 1200000;
vdd->volt_scale = vp_forceupdate_scale_voltage;
vdd->vp_enabled = false;
@@ -851,7 +850,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
* @voltdm: pointer to the VDD whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used expecially
+ * to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
void omap_voltage_reset(struct voltagedomain *voltdm)
@@ -912,7 +911,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
* This API searches only through the non-compensated voltages int the
* voltage table.
* Returns pointer to the voltage table entry corresponding to volt on
- * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * success. Returns -ENODATA if no voltage table exisits for the passed voltage
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 1a5d6a0e260..5ceafdccc45 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,7 +19,7 @@
#include "common.h"
/*
- * The Orion has fully programable address map. There's a separate address
+ * The Orion has fully programmable address map. There's a separate address
* map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fd..a5930f83958 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
* The power front LEDs (blue and red) and SATA red LEDs are controlled via a
* single GPIO line and are compatible with the leds-gpio driver.
*
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
* in the following array:
*
* SATAx blue LED | SATAx activity | LED state
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f0f43e13ac8..e6d64494d3d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -36,7 +36,7 @@
/****************************************************************************
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
+ * partitions on the device because we want to keep compatibility with
* existing QNAP firmware.
*
* Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92f393f08fa..9eac8192d92 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -56,7 +56,7 @@
/****************************************************************************
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
+ * partitions on the device because we want to keep compatibility with
* existing QNAP firmware.
*
* Layout as used by QNAP:
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index bfbecec6d05..810a982a66f 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
index 1ce09044849..1d5859d9a0e 100644
--- a/arch/arm/mach-pxa/clock-pxa2xx.c
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -9,7 +9,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/pxa2xx-regs.h>
@@ -33,32 +33,22 @@ const struct clkops clk_pxa2xx_cken_ops = {
#ifdef CONFIG_PM
static uint32_t saved_cken;
-static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_clock_suspend(void)
{
saved_cken = CKEN;
return 0;
}
-static int pxa2xx_clock_resume(struct sys_device *d)
+static void pxa2xx_clock_resume(void)
{
CKEN = saved_cken;
- return 0;
}
#else
#define pxa2xx_clock_suspend NULL
#define pxa2xx_clock_resume NULL
#endif
-struct sysdev_class pxa2xx_clock_sysclass = {
- .name = "pxa2xx-clock",
+struct syscore_ops pxa2xx_clock_syscore_ops = {
.suspend = pxa2xx_clock_suspend,
.resume = pxa2xx_clock_resume,
};
-
-static int __init pxa2xx_clock_init(void)
-{
- if (cpu_is_pxa2xx())
- return sysdev_class_register(&pxa2xx_clock_sysclass);
- return 0;
-}
-postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 3f864cd0bd2..2a37a9a8f62 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
@@ -182,7 +183,7 @@ const struct clkops clk_pxa3xx_pout_ops = {
static uint32_t cken[2];
static uint32_t accr;
-static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_clock_suspend(void)
{
cken[0] = CKENA;
cken[1] = CKENB;
@@ -190,28 +191,18 @@ static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
return 0;
}
-static int pxa3xx_clock_resume(struct sys_device *d)
+static void pxa3xx_clock_resume(void)
{
ACCR = accr;
CKENA = cken[0];
CKENB = cken[1];
- return 0;
}
#else
#define pxa3xx_clock_suspend NULL
#define pxa3xx_clock_resume NULL
#endif
-struct sysdev_class pxa3xx_clock_sysclass = {
- .name = "pxa3xx-clock",
+struct syscore_ops pxa3xx_clock_syscore_ops = {
.suspend = pxa3xx_clock_suspend,
.resume = pxa3xx_clock_resume,
};
-
-static int __init pxa3xx_clock_init(void)
-{
- if (cpu_is_pxa3xx() || cpu_is_pxa95x())
- return sysdev_class_register(&pxa3xx_clock_sysclass);
- return 0;
-}
-postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index f9f349a21b5..1f2fb9c43f0 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,5 +1,5 @@
#include <linux/clkdev.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
struct clkops {
void (*enable)(struct clk *);
@@ -54,7 +54,7 @@ extern const struct clkops clk_pxa2xx_cken_ops;
void clk_pxa2xx_cken_enable(struct clk *clk);
void clk_pxa2xx_cken_disable(struct clk *clk);
-extern struct sysdev_class pxa2xx_clock_sysclass;
+extern struct syscore_ops pxa2xx_clock_syscore_ops;
#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
@@ -74,5 +74,6 @@ extern const struct clkops clk_pxa3xx_smemc_ops;
extern void clk_pxa3xx_cken_enable(struct clk *);
extern void clk_pxa3xx_cken_disable(struct clk *);
-extern struct sysdev_class pxa3xx_clock_sysclass;
+extern struct syscore_ops pxa3xx_clock_syscore_ops;
+
#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index b88d601a809..13518a70539 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -10,7 +10,6 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 8225e2e58c6..a1099678247 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -10,7 +10,7 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -388,7 +388,7 @@ static inline void cmx2xx_init_display(void) {}
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
-static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+static int cmx2xx_suspend(void)
{
cmx2xx_pci_suspend();
@@ -412,7 +412,7 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int cmx2xx_resume(struct sys_device *dev)
+static void cmx2xx_resume(void)
{
cmx2xx_pci_resume();
@@ -420,27 +420,18 @@ static int cmx2xx_resume(struct sys_device *dev)
__raw_writel(sleep_save_msc[0], MSC0);
__raw_writel(sleep_save_msc[1], MSC1);
__raw_writel(sleep_save_msc[2], MSC2);
-
- return 0;
}
-static struct sysdev_class cmx2xx_pm_sysclass = {
- .name = "pm",
+static struct syscore_ops cmx2xx_pm_syscore_ops = {
.resume = cmx2xx_resume,
.suspend = cmx2xx_suspend,
};
-static struct sys_device cmx2xx_pm_device = {
- .cls = &cmx2xx_pm_sysclass,
-};
-
static int __init cmx2xx_pm_init(void)
{
- int error;
- error = sysdev_class_register(&cmx2xx_pm_sysclass);
- if (error == 0)
- error = sysdev_register(&cmx2xx_pm_device);
- return error;
+ register_syscore_ops(&cmx2xx_pm_syscore_ops);
+
+ return 0;
}
#else
static int __init cmx2xx_pm_init(void) { return 0; }
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 81c3c433e2d..d28e802e244 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 44c1b77ece6..80538b8806e 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/sysdev.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 6fc5d328ba7..7545a48ed88 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -17,7 +17,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/ucb1400.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index a079d8baa45..e6c9344a95a 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -61,10 +61,10 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
#define pxa3xx_get_clk_frequency_khz(x) (0)
#endif
-extern struct sysdev_class pxa_irq_sysclass;
-extern struct sysdev_class pxa_gpio_sysclass;
-extern struct sysdev_class pxa2xx_mfp_sysclass;
-extern struct sysdev_class pxa3xx_mfp_sysclass;
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa_gpio_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
void __init pxa_set_ffuart_info(void *info);
void __init pxa_set_btuart_info(void *info);
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6de0ad0eea6..f941a495a4a 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
@@ -735,7 +735,7 @@ static struct platform_device bq24022 = {
* StrataFlash
*/
-static void hx4700_set_vpp(struct map_info *map, int vpp)
+static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
}
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index b024a8b3743..c4639502efc 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -99,11 +99,24 @@
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-#define NR_BUILTIN_GPIO 128
+#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
-#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ int gpio;
+
+ if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1)
+ return irq - IRQ_GPIO0;
+
+ gpio = irq - PXA_GPIO_IRQ_BASE;
+ if (gpio >= 2 && gpio < NR_BUILTIN_GPIO)
+ return gpio;
+
+ return -1;
+}
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index a4285fc0087..038402404e3 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -93,9 +93,6 @@
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
/*
* The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e4fb4668c26..207ecb49a61 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -38,7 +38,7 @@
#define PCMD(x) __REG(0x40F50110 + ((x) << 2))
/*
- * Slave Power Managment Unit
+ * Slave Power Management Unit
*/
#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */
#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index faa408ab7ad..0641f31a56b 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -64,7 +64,7 @@
/*
* CPLD registers:
- * Only 4 registers, but spreaded over a 32MB address space.
+ * Only 4 registers, but spread over a 32MB address space.
* Be gentle, and remap that over 32kB...
*/
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6251e3f5c62..32ed551bf9c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -183,7 +183,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
-static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_irq_suspend(void)
{
int i;
@@ -202,7 +202,7 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int pxa_irq_resume(struct sys_device *dev)
+static void pxa_irq_resume(void)
{
int i;
@@ -218,22 +218,13 @@ static int pxa_irq_resume(struct sys_device *dev)
__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
__raw_writel(1, IRQ_BASE + ICCR);
- return 0;
}
#else
#define pxa_irq_suspend NULL
#define pxa_irq_resume NULL
#endif
-struct sysdev_class pxa_irq_sysclass = {
- .name = "irq",
+struct syscore_ops pxa_irq_syscore_ops = {
.suspend = pxa_irq_suspend,
.resume = pxa_irq_resume,
};
-
-static int __init pxa_irq_init(void)
-{
- return sysdev_class_register(&pxa_irq_sysclass);
-}
-
-core_initcall(pxa_irq_init);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index f5de541725b..6cf8180bf5b 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -159,30 +159,22 @@ static void __init lpd270_init_irq(void)
#ifdef CONFIG_PM
-static int lpd270_irq_resume(struct sys_device *dev)
+static void lpd270_irq_resume(void)
{
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
- return 0;
}
-static struct sysdev_class lpd270_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops lpd270_irq_syscore_ops = {
.resume = lpd270_irq_resume,
};
-static struct sys_device lpd270_irq_device = {
- .cls = &lpd270_irq_sysclass,
-};
-
static int __init lpd270_irq_device_init(void)
{
- int ret = -ENODEV;
if (machine_is_logicpd_pxa270()) {
- ret = sysdev_class_register(&lpd270_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lpd270_irq_device);
+ register_syscore_ops(&lpd270_irq_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(lpd270_irq_device_init);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3ede978c83d..e10ddb82714 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/major.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
@@ -176,31 +176,22 @@ static void __init lubbock_init_irq(void)
#ifdef CONFIG_PM
-static int lubbock_irq_resume(struct sys_device *dev)
+static void lubbock_irq_resume(void)
{
LUB_IRQ_MASK_EN = lubbock_irq_enabled;
- return 0;
}
-static struct sysdev_class lubbock_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops lubbock_irq_syscore_ops = {
.resume = lubbock_irq_resume,
};
-static struct sys_device lubbock_irq_device = {
- .cls = &lubbock_irq_sysclass,
-};
-
static int __init lubbock_irq_device_init(void)
{
- int ret = -ENODEV;
-
if (machine_is_lubbock()) {
- ret = sysdev_class_register(&lubbock_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lubbock_irq_device);
+ register_syscore_ops(&lubbock_irq_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(lubbock_irq_device_init);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a72993dde2b..e1920572948 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
@@ -662,7 +662,7 @@ static struct pxaohci_platform_data magician_ohci_info = {
* StrataFlash
*/
-static void magician_set_vpp(struct map_info *map, int vpp)
+static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 95163baca29..3479e2b3b51 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -185,31 +185,21 @@ static void __init mainstone_init_irq(void)
#ifdef CONFIG_PM
-static int mainstone_irq_resume(struct sys_device *dev)
+static void mainstone_irq_resume(void)
{
MST_INTMSKENA = mainstone_irq_enabled;
- return 0;
}
-static struct sysdev_class mainstone_irq_sysclass = {
- .name = "cpld_irq",
+static struct syscore_ops mainstone_irq_syscore_ops = {
.resume = mainstone_irq_resume,
};
-static struct sys_device mainstone_irq_device = {
- .cls = &mainstone_irq_sysclass,
-};
-
static int __init mainstone_irq_device_init(void)
{
- int ret = -ENODEV;
+ if (machine_is_mainstone())
+ register_syscore_ops(&mainstone_irq_syscore_ops);
- if (machine_is_mainstone()) {
- ret = sysdev_class_register(&mainstone_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&mainstone_irq_device);
- }
- return ret;
+ return 0;
}
device_initcall(mainstone_irq_device_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 1d1419b7345..87ae3129f4f 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
@@ -338,7 +338,7 @@ static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
static unsigned long saved_pgsr[4];
-static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_mfp_suspend(void)
{
int i;
@@ -365,7 +365,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
return 0;
}
-static int pxa2xx_mfp_resume(struct sys_device *d)
+static void pxa2xx_mfp_resume(void)
{
int i;
@@ -376,15 +376,13 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
- return 0;
}
#else
#define pxa2xx_mfp_suspend NULL
#define pxa2xx_mfp_resume NULL
#endif
-struct sysdev_class pxa2xx_mfp_sysclass = {
- .name = "mfp",
+struct syscore_ops pxa2xx_mfp_syscore_ops = {
.suspend = pxa2xx_mfp_suspend,
.resume = pxa2xx_mfp_resume,
};
@@ -409,6 +407,6 @@ static int __init pxa2xx_mfp_init(void)
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
- return sysdev_class_register(&pxa2xx_mfp_sysclass);
+ return 0;
}
postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 7a270eecd48..89863a01ecd 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/mfp-pxa3xx.h>
@@ -31,13 +31,13 @@
* a pull-down mode if they're an active low chip select, and we're
* just entering standby.
*/
-static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_mfp_suspend(void)
{
mfp_config_lpm();
return 0;
}
-static int pxa3xx_mfp_resume(struct sys_device *d)
+static void pxa3xx_mfp_resume(void)
{
mfp_config_run();
@@ -47,24 +47,13 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
* preserve them here in case they will be referenced later
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
- return 0;
}
#else
#define pxa3xx_mfp_suspend NULL
#define pxa3xx_mfp_resume NULL
#endif
-struct sysdev_class pxa3xx_mfp_sysclass = {
- .name = "mfp",
+struct syscore_ops pxa3xx_mfp_syscore_ops = {
.suspend = pxa3xx_mfp_suspend,
- .resume = pxa3xx_mfp_resume,
+ .resume = pxa3xx_mfp_resume,
};
-
-static int __init mfp_init_devicefs(void)
-{
- if (cpu_is_pxa3xx())
- return sysdev_class_register(&pxa3xx_mfp_sysclass);
-
- return 0;
-}
-postcore_initcall(mfp_init_devicefs);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index dd13bb63259..e3470137c93 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -22,7 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
@@ -458,7 +458,7 @@ static struct platform_device strataflash = {
/*
* Suspend/Resume bootstrap management
*
- * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
* this sequence is as follows :
* - disables interrupts
* - initialize SDRAM (self refresh RAM into active RAM)
@@ -488,7 +488,7 @@ static void install_bootstrap(void)
}
-static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+static int mioa701_sys_suspend(void)
{
int i = 0, is_bt_on;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
@@ -514,7 +514,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
return 0;
}
-static int mioa701_sys_resume(struct sys_device *sysdev)
+static void mioa701_sys_resume(void)
{
int i = 0;
u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
@@ -527,43 +527,18 @@ static int mioa701_sys_resume(struct sys_device *sysdev)
*mem_resume_enabler = save_buffer[i++];
*mem_resume_bt = save_buffer[i++];
*mem_resume_unknown = save_buffer[i++];
-
- return 0;
}
-static struct sysdev_class mioa701_sysclass = {
- .name = "mioa701",
-};
-
-static struct sys_device sysdev_bootstrap = {
- .cls = &mioa701_sysclass,
-};
-
-static struct sysdev_driver driver_bootstrap = {
- .suspend = &mioa701_sys_suspend,
- .resume = &mioa701_sys_resume,
+static struct syscore_ops mioa701_syscore_ops = {
+ .suspend = mioa701_sys_suspend,
+ .resume = mioa701_sys_resume,
};
static int __init bootstrap_init(void)
{
- int rc;
int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
- rc = sysdev_class_register(&mioa701_sysclass);
- if (rc) {
- printk(KERN_ERR "Failed registering mioa701 sys class\n");
- return -ENODEV;
- }
- rc = sysdev_register(&sysdev_bootstrap);
- if (rc) {
- printk(KERN_ERR "Failed registering mioa701 sys device\n");
- return -ENODEV;
- }
- rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
- if (rc) {
- printk(KERN_ERR "Failed registering PMU sys driver\n");
- return -ENODEV;
- }
+ register_syscore_ops(&mioa701_syscore_ops);
save_buffer = kmalloc(save_size, GFP_KERNEL);
if (!save_buffer)
@@ -576,9 +551,7 @@ static int __init bootstrap_init(void)
static void bootstrap_exit(void)
{
kfree(save_buffer);
- sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
- sysdev_unregister(&sysdev_bootstrap);
- sysdev_class_unregister(&mioa701_sysclass);
+ unregister_syscore_ops(&mioa701_syscore_ops);
printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
"resume !!!\n");
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index a6f898cbfac..4061ecddee7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,7 +24,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/sysdev.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 8aadad55fbe..20d1b18b173 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -25,7 +25,6 @@
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/power_supply.h>
-#include <linux/sysdev.h>
#include <linux/w1-gpio.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3b8a4f37dbb..65f24f0b77e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -19,7 +19,7 @@
*/
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
@@ -233,9 +233,9 @@ static struct palmz72_resume_info palmz72_resume_info = {
static unsigned long store_ptr;
-/* sys_device for Palm Zire 72 PM */
+/* syscore_ops for Palm Zire 72 PM */
-static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+static int palmz72_pm_suspend(void)
{
/* setup the resume_info struct for the original bootloader */
palmz72_resume_info.resume_addr = (u32) cpu_resume;
@@ -249,31 +249,23 @@ static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
return 0;
}
-static int palmz72_pm_resume(struct sys_device *dev)
+static void palmz72_pm_resume(void)
{
*PALMZ72_SAVE_DWORD = store_ptr;
- return 0;
}
-static struct sysdev_class palmz72_pm_sysclass = {
- .name = "palmz72_pm",
+static struct syscore_ops palmz72_pm_syscore_ops = {
.suspend = palmz72_pm_suspend,
.resume = palmz72_pm_resume,
};
-static struct sys_device palmz72_pm_device = {
- .cls = &palmz72_pm_sysclass,
-};
-
static int __init palmz72_pm_init(void)
{
- int ret = -ENODEV;
if (machine_is_palmz72()) {
- ret = sysdev_class_register(&palmz72_pm_sysclass);
- if (ret == 0)
- ret = sysdev_register(&palmz72_pm_device);
+ register_syscore_ops(&palmz72_pm_syscore_ops);
+ return 0;
}
- return ret;
+ return -ENODEV;
}
device_initcall(palmz72_pm_init);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6bde5956358..fed363cec9c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <asm/mach/map.h>
@@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {}
static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = IRQ_TO_GPIO(d->irq);
+ int gpio = irq_to_gpio(d->irq);
uint32_t mask = 0;
if (gpio >= 0 && gpio < 85)
@@ -350,21 +350,9 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa_device_asoc_platform,
};
-static struct sys_device pxa25x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa2xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa2xx_clock_sysclass,
- }
-};
-
static int __init pxa25x_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa25x()) {
@@ -377,11 +365,10 @@ static int __init pxa25x_init(void)
pxa25x_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) {
- ret = sysdev_register(&pxa25x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1cb5d0f9723..2fecbec58d8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
@@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {}
*/
static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = IRQ_TO_GPIO(d->irq);
+ int gpio = irq_to_gpio(d->irq);
uint32_t mask;
if (gpio >= 0 && gpio < 128)
@@ -428,21 +428,9 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
-static struct sys_device pxa27x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa2xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa2xx_clock_sysclass,
- }
-};
-
static int __init pxa27x_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa27x()) {
@@ -455,11 +443,10 @@ static int __init pxa27x_init(void)
pxa27x_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
- ret = sysdev_register(&pxa27x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8dd10739115..8521d7d6f1d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -20,7 +20,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
@@ -427,21 +427,9 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
-static struct sys_device pxa3xx_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa3xx_mfp_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa3xx_clock_sysclass,
- }
-};
-
static int __init pxa3xx_init(void)
{
- int i, ret = 0;
+ int ret = 0;
if (cpu_is_pxa3xx()) {
@@ -462,11 +450,10 @@ static int __init pxa3xx_init(void)
pxa3xx_init_pm();
- for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) {
- ret = sysdev_register(&pxa3xx_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 23b229bd06e..ecc82a330fa 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -18,7 +18,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -260,16 +260,6 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
-static struct sys_device pxa95x_sysdev[] = {
- {
- .cls = &pxa_irq_sysclass,
- }, {
- .cls = &pxa_gpio_sysclass,
- }, {
- .cls = &pxa3xx_clock_sysclass,
- }
-};
-
static int __init pxa95x_init(void)
{
int ret = 0, i;
@@ -293,11 +283,9 @@ static int __init pxa95x_init(void)
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
- for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
- ret = sysdev_register(&pxa95x_sysdev[i]);
- if (ret)
- pr_err("failed to register sysdev[%d]\n", i);
- }
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index cd1861351f7..d130f77b6d1 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 232b7316ec0..79923058d10 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/smemc.h>
@@ -16,7 +16,7 @@ static unsigned long msc[2];
static unsigned long sxcnfg, memclkcfg;
static unsigned long csadrcfg[4];
-static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa3xx_smemc_suspend(void)
{
msc[0] = __raw_readl(MSC0);
msc[1] = __raw_readl(MSC1);
@@ -30,7 +30,7 @@ static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int pxa3xx_smemc_resume(struct sys_device *dev)
+static void pxa3xx_smemc_resume(void)
{
__raw_writel(msc[0], MSC0);
__raw_writel(msc[1], MSC1);
@@ -40,34 +40,19 @@ static int pxa3xx_smemc_resume(struct sys_device *dev)
__raw_writel(csadrcfg[1], CSADRCFG1);
__raw_writel(csadrcfg[2], CSADRCFG2);
__raw_writel(csadrcfg[3], CSADRCFG3);
-
- return 0;
}
-static struct sysdev_class smemc_sysclass = {
- .name = "smemc",
+static struct syscore_ops smemc_syscore_ops = {
.suspend = pxa3xx_smemc_suspend,
.resume = pxa3xx_smemc_resume,
};
-static struct sys_device smemc_sysdev = {
- .id = 0,
- .cls = &smemc_sysclass,
-};
-
static int __init smemc_init(void)
{
- int ret = 0;
+ if (cpu_is_pxa3xx())
+ register_syscore_ops(&smemc_syscore_ops);
- if (cpu_is_pxa3xx()) {
- ret = sysdev_class_register(&smemc_sysclass);
- if (ret)
- return ret;
-
- ret = sysdev_register(&smemc_sysdev);
- }
-
- return ret;
+ return 0;
}
subsys_initcall(smemc_init);
#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 428da3ff33a..de684701449 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -105,19 +105,6 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
.set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_read_oscr(struct clocksource *cs)
-{
- return OSCR;
-}
-
-static struct clocksource cksrc_pxa_oscr0 = {
- .name = "oscr0",
- .rating = 200,
- .read = pxa_read_oscr,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static struct irqaction pxa_ost0_irq = {
.name = "ost0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
@@ -134,7 +121,6 @@ static void __init pxa_timer_init(void)
init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
- clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
@@ -144,7 +130,8 @@ static void __init pxa_timer_init(void)
setup_irq(IRQ_OST0, &pxa_ost0_irq);
- clocksource_register_hz(&cksrc_pxa_oscr0, clock_tick_rate);
+ clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
+ clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_pxa_osmr0);
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index b9cfbebdfe9..687417a9369 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index b523f119e0f..903218eab56 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -44,6 +44,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/syscore_ops.h>
#include <mach/pxa25x.h>
#include <mach/audio.h>
@@ -130,20 +131,19 @@ static u8 viper_hw_version(void)
return v1;
}
-/* CPU sysdev */
-static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+/* CPU system core operations. */
+static int viper_cpu_suspend(void)
{
viper_icr_set_bit(VIPER_ICR_R_DIS);
return 0;
}
-static int viper_cpu_resume(struct sys_device *sysdev)
+static void viper_cpu_resume(void)
{
viper_icr_clear_bit(VIPER_ICR_R_DIS);
- return 0;
}
-static struct sysdev_driver viper_cpu_sysdev_driver = {
+static struct syscore_ops viper_cpu_syscore_ops = {
.suspend = viper_cpu_suspend,
.resume = viper_cpu_resume,
};
@@ -945,7 +945,7 @@ static void __init viper_init(void)
viper_init_vcore_gpios();
viper_init_cpufreq();
- sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+ register_syscore_ops(&viper_cpu_syscore_ops);
if (version) {
pr_info("viper: hardware v%di%d detected. "
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f71d377c864..67bd41488bf 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -16,7 +16,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 525ad17f826..5c23450d2d1 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -31,6 +31,7 @@
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <mach/hardware.h>
@@ -41,7 +42,6 @@
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
@@ -58,27 +58,7 @@
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-static int realview_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-
- return 0;
-}
-
-static void realview_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static void realview_flash_set_vpp(int on)
+static void realview_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -90,16 +70,13 @@ static void realview_flash_set_vpp(int on)
__raw_writel(val, REALVIEW_FLASHCTRL);
}
-static struct flash_platform_data realview_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data realview_flash_data = {
.width = 4,
- .init = realview_flash_init,
- .exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
struct platform_device realview_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
@@ -296,6 +273,10 @@ static struct clk ref24_clk = {
.rate = 24000000,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup lookups[] = {
@@ -338,7 +319,10 @@ static struct clk_lookup lookups[] = {
}, { /* SSP */
.dev_id = "dev:ssp0",
.clk = &ref24_clk,
- }
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
+ },
};
void __init realview_init_early(void)
@@ -526,8 +510,8 @@ void __init realview_timer_init(unsigned int timer_irq)
writel(0, timer2_va_base + TIMER_CTRL);
writel(0, timer3_va_base + TIMER_CTRL);
- sp804_clocksource_init(timer3_va_base);
- sp804_clockevents_init(timer0_va_base, timer_irq);
+ sp804_clocksource_init(timer3_va_base, "timer3");
+ sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
}
/*
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
index 0c5d749d7b5..9a732195aa1 100644
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -4,5 +4,5 @@
* operation to deadlock the system.
*/
#define mb() dsb()
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() mb()
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
deleted file mode 100644
index c8221b38ee7..00000000000
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 23919229e12..963bf0d8119 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -61,6 +62,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index cf68136cc66..b2b2a5bb275 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -19,7 +19,7 @@
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
+ * number of DMA channels, and not of all of them (dependent on the device)
* can be attached to any DMA source. We therefore let the DMA core handle
* the allocation of hardware channels to clients.
*/
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 7f7c5294796..988a6863e54 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -101,7 +101,7 @@
#define S3C2410_BANKCON_PMC16 (0x03)
/* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
+ * 6 and 7 have different configurations depending on
* the memory type bits */
#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 5e2f3533205..2854129f8cc 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -23,38 +23,12 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
- return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
- .add = s3c2410_irq_add,
+struct syscore_ops s3c24xx_irq_syscore_ops = {
.suspend = s3c24xx_irq_suspend,
.resume = s3c24xx_irq_resume,
};
-
-static int __init s3c2410_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
-
-static struct sysdev_driver s3c2410a_irq_driver = {
- .add = s3c2410_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
-
-static int __init s3c2410a_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
-}
-
-arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 2970ea9f7c2..1e2d536adda 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -17,7 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
@@ -214,17 +214,16 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
/* NAND Flash on BAST board */
#ifdef CONFIG_PM
-static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int bast_pm_suspend(void)
{
/* ensure that an nRESET is not generated on resume. */
gpio_direction_output(S3C2410_GPA(21), 1);
return 0;
}
-static int bast_pm_resume(struct sys_device *sd)
+static void bast_pm_resume(void)
{
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
- return 0;
}
#else
@@ -232,16 +231,11 @@ static int bast_pm_resume(struct sys_device *sd)
#define bast_pm_resume NULL
#endif
-static struct sysdev_class bast_pm_sysclass = {
- .name = "mach-bast",
+static struct syscore_ops bast_pm_syscore_ops = {
.suspend = bast_pm_suspend,
.resume = bast_pm_resume,
};
-static struct sys_device bast_pm_sysdev = {
- .cls = &bast_pm_sysclass,
-};
-
static int smartmedia_map[] = { 0 };
static int chip0_map[] = { 1 };
static int chip1_map[] = { 2 };
@@ -642,8 +636,7 @@ static void __init bast_map_io(void)
static void __init bast_init(void)
{
- sysdev_class_register(&bast_pm_sysclass);
- sysdev_register(&bast_pm_sysdev);
+ register_syscore_ops(&bast_pm_syscore_ops);
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c_nand_set_platdata(&bast_nand_info);
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 66f44440d5d..079dcaa602d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.def_trigger = "",
};
-/* This is the blue LED on the device. Originaly used to indicate GPS activity
+/* This is the blue LED on the device. Originally used to indicate GPS activity
* by flashing. */
static struct s3c24xx_led_platdata n35_blue_led_pdata = {
.name = "blue_led",
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index 598d130633d..ad9f750f1e5 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -32,7 +32,7 @@
#include "nor-simtec.h"
-static void simtec_nor_vpp(struct map_info *map, int vpp)
+static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
{
unsigned int val;
unsigned long flags;
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 725636fc4dc..4728f9aa7df 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -92,7 +93,7 @@ static void s3c2410_pm_prepare(void)
}
}
-static int s3c2410_pm_resume(struct sys_device *dev)
+static void s3c2410_pm_resume(void)
{
unsigned long tmp;
@@ -104,10 +105,12 @@ static int s3c2410_pm_resume(struct sys_device *dev)
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-
- return 0;
}
+struct syscore_ops s3c2410_pm_syscore_ops = {
+ .resume = s3c2410_pm_resume,
+};
+
static int s3c2410_pm_add(struct sys_device *dev)
{
pm_cpu_prep = s3c2410_pm_prepare;
@@ -119,7 +122,6 @@ static int s3c2410_pm_add(struct sys_device *dev)
#if defined(CONFIG_CPU_S3C2410)
static struct sysdev_driver s3c2410_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
/* register ourselves */
@@ -133,7 +135,6 @@ arch_initcall(s3c2410_pm_drvinit);
static struct sysdev_driver s3c2410a_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2410a_pm_drvinit(void)
@@ -147,7 +148,6 @@ arch_initcall(s3c2410a_pm_drvinit);
#if defined(CONFIG_CPU_S3C2440)
static struct sysdev_driver s3c2440_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2440_pm_drvinit(void)
@@ -161,7 +161,6 @@ arch_initcall(s3c2440_pm_drvinit);
#if defined(CONFIG_CPU_S3C2442)
static struct sysdev_driver s3c2442_pm_driver = {
.add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
};
static int __init s3c2442_pm_drvinit(void)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index adc90a3c589..f1d3bd8f6f1 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -40,6 +41,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pll.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -168,6 +170,9 @@ int __init s3c2410_init(void)
{
printk("S3C2410: Initialising architecture\n");
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2410_sysdev);
}
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index f3355d2ec63..1a1aa220972 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -202,8 +202,6 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
static struct sysdev_driver s3c2412_irq_driver = {
.add = s3c2412_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int s3c2412_irq_init(void)
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 923e01bdf01..85dcaeb9e62 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -17,7 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -486,7 +486,7 @@ static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
/* Jive power management device */
#ifdef CONFIG_PM
-static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int jive_pm_suspend(void)
{
/* Write the magic value u-boot uses to check for resume into
* the INFORM0 register, and ensure INFORM1 is set to the
@@ -498,10 +498,9 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
return 0;
}
-static int jive_pm_resume(struct sys_device *sd)
+static void jive_pm_resume(void)
{
__raw_writel(0x0, S3C2412_INFORM0);
- return 0;
}
#else
@@ -509,16 +508,11 @@ static int jive_pm_resume(struct sys_device *sd)
#define jive_pm_resume NULL
#endif
-static struct sysdev_class jive_pm_sysclass = {
- .name = "jive-pm",
+static struct syscore_ops jive_pm_syscore_ops = {
.suspend = jive_pm_suspend,
.resume = jive_pm_resume,
};
-static struct sys_device jive_pm_sysdev = {
- .cls = &jive_pm_sysclass,
-};
-
static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
@@ -536,10 +530,9 @@ static void jive_power_off(void)
static void __init jive_machine_init(void)
{
- /* register system devices for managing low level suspend */
+ /* register system core operations for managing low level suspend */
- sysdev_class_register(&jive_pm_sysclass);
- sysdev_register(&jive_pm_sysdev);
+ register_syscore_ops(&jive_pm_syscore_ops);
/* write our sleep configurations for the IO. Pull down all unused
* IO, ensure that we have turned off all peripherals we do not
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index a7417c479ff..752b13a7b3d 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -86,13 +87,24 @@ static struct sleep_save s3c2412_sleep[] = {
SAVE_ITEM(S3C2413_GPJSLPCON),
};
-static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_driver s3c2412_pm_driver = {
+ .add = s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
{
s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
-static int s3c2412_pm_resume(struct sys_device *dev)
+static void s3c2412_pm_resume(void)
{
unsigned long tmp;
@@ -102,18 +114,9 @@ static int s3c2412_pm_resume(struct sys_device *dev)
__raw_writel(tmp, S3C2412_PWRCFG);
s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
- return 0;
}
-static struct sysdev_driver s3c2412_pm_driver = {
- .add = s3c2412_pm_add,
+struct syscore_ops s3c2412_pm_syscore_ops = {
.suspend = s3c2412_pm_suspend,
.resume = s3c2412_pm_resume,
};
-
-static __init int s3c2412_pm_init(void)
-{
- return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
-}
-
-arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4c6df51ddf3..ef0958d3e5c 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -244,5 +245,8 @@ int __init s3c2412_init(void)
{
printk("S3C2412: Initialising architecture\n");
+ register_syscore_ops(&s3c2412_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2412_sysdev);
}
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 77b38f2381c..28ad20d4244 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -236,8 +236,6 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
static struct sysdev_driver s3c2416_irq_driver = {
.add = s3c2416_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int __init s3c2416_irq_init(void)
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 4a04205b04d..41db2b21e21 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -11,6 +11,7 @@
*/
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
@@ -55,30 +56,26 @@ static int s3c2416_pm_add(struct sys_device *sysdev)
return 0;
}
-static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_driver s3c2416_pm_driver = {
+ .add = s3c2416_pm_add,
+};
+
+static __init int s3c2416_pm_init(void)
{
- return 0;
+ return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
}
-static int s3c2416_pm_resume(struct sys_device *dev)
+arch_initcall(s3c2416_pm_init);
+
+
+static void s3c2416_pm_resume(void)
{
/* unset the return-from-sleep amd inform flags */
__raw_writel(0x0, S3C2443_PWRMODE);
__raw_writel(0x0, S3C2412_INFORM0);
__raw_writel(0x0, S3C2412_INFORM1);
-
- return 0;
}
-static struct sysdev_driver s3c2416_pm_driver = {
- .add = s3c2416_pm_add,
- .suspend = s3c2416_pm_suspend,
+struct syscore_ops s3c2416_pm_syscore_ops = {
.resume = s3c2416_pm_resume,
};
-
-static __init int s3c2416_pm_init(void)
-{
- return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
-}
-
-arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ba7fd873743..494ce913dc9 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -54,6 +55,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
+#include <plat/pm.h>
#include <plat/iic-core.h>
#include <plat/fb-core.h>
@@ -95,6 +97,9 @@ int __init s3c2416_init(void)
s3c_fb_setname("s3c2443-fb");
+ register_syscore_ops(&s3c2416_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2416_sysdev);
}
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 0db2411ef4b..716662008ce 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
.num_resources = 0,
};
+static struct platform_device gta02_dfbmcs320_device = {
+ .name = "dfbmcs320",
+};
+
static struct i2c_board_info gta02_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("pcf50633", 0x73),
@@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_iis,
&samsung_asoc_dma,
&s3c_device_i2c0,
+ &gta02_dfbmcs320_device,
&gta02_buttons_device,
&s3c_device_adc,
&s3c_device_ts,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dfedc9c9e00..dd3120df09f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
- * Therefore timings for other resolutions have been ommited here.
+ * Therefore timings for other resolutions have been omitted here.
*/
[2] = {
_LCD_DECLARE(
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 14dc6789775..d8853639331 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
#include <linux/i2c.h>
@@ -284,7 +284,7 @@ static struct platform_device osiris_pcmcia = {
#ifdef CONFIG_PM
static unsigned char pm_osiris_ctrl0;
-static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int osiris_pm_suspend(void)
{
unsigned int tmp;
@@ -304,7 +304,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
return 0;
}
-static int osiris_pm_resume(struct sys_device *sd)
+static void osiris_pm_resume(void)
{
if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
@@ -312,8 +312,6 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-
- return 0;
}
#else
@@ -321,16 +319,11 @@ static int osiris_pm_resume(struct sys_device *sd)
#define osiris_pm_resume NULL
#endif
-static struct sysdev_class osiris_pm_sysclass = {
- .name = "mach-osiris",
+static struct syscore_ops osiris_pm_syscore_ops = {
.suspend = osiris_pm_suspend,
.resume = osiris_pm_resume,
};
-static struct sys_device osiris_pm_sysdev = {
- .cls = &osiris_pm_sysclass,
-};
-
/* Link for DVS driver to TPS65011 */
static void osiris_tps_release(struct device *dev)
@@ -439,8 +432,7 @@ static void __init osiris_map_io(void)
static void __init osiris_init(void)
{
- sysdev_class_register(&osiris_pm_sysclass);
- sysdev_register(&osiris_pm_sysdev);
+ register_syscore_ops(&osiris_pm_syscore_ops);
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&osiris_nand_info);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index f7663f731ea..ce99ff72838 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -33,6 +34,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/s3c244x.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -51,6 +53,12 @@ int __init s3c2440_init(void)
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+ /* register suspend/resume handlers */
+
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
/* register our system device for everything else */
return sysdev_register(&s3c2440_sysdev);
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index ecf81354655..6224bad4d60 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -29,6 +29,7 @@
#include <linux/err.h>
#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
@@ -45,6 +46,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/s3c244x.h>
+#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -167,6 +169,10 @@ int __init s3c2442_init(void)
{
printk("S3C2442: Initialising architecture\n");
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
return sysdev_register(&s3c2442_sysdev);
}
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index de07c2feaa3..c63e8f26d90 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -116,8 +116,6 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
static struct sysdev_driver s3c2440_irq_driver = {
.add = s3c244x_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
static int s3c2440_irq_init(void)
@@ -129,8 +127,6 @@ arch_initcall(s3c2440_irq_init);
static struct sysdev_driver s3c2442_irq_driver = {
.add = s3c244x_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
};
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 90c1707b9c9..7e8a23d2098 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -134,45 +135,14 @@ void __init s3c244x_init_clocks(int xtal)
s3c2410_baseclk_add();
}
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c244x_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
-{
- s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-static int s3c244x_resume(struct sys_device *dev)
-{
- s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume NULL
-#endif
-
/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */
struct sysdev_class s3c2440_sysclass = {
.name = "s3c2440-core",
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume
};
struct sysdev_class s3c2442_sysclass = {
.name = "s3c2442-core",
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume
};
/* need to register class before we actually register the device, and
@@ -194,3 +164,33 @@ static int __init s3c2442_core_init(void)
}
core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index c35585cf8c4..b197171e7d0 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
case S3C2410_DMAOP_FLUSH:
return s3c64xx_dma_flush(chan);
- /* belive PAUSE/RESUME are no-ops */
+ /* believe PAUSE/RESUME are no-ops */
case S3C2410_DMAOP_PAUSE:
case S3C2410_DMAOP_RESUME:
case S3C2410_DMAOP_STARTED:
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index da1bec64b9d..8bec61e242c 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -13,7 +13,7 @@
*/
#include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
@@ -54,7 +54,7 @@ static struct irq_grp_save {
static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c64xx_irq_pm_suspend(void)
{
struct irq_grp_save *grp = eint_grp_save;
int i;
@@ -75,7 +75,7 @@ static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+static void s3c64xx_irq_pm_resume(void)
{
struct irq_grp_save *grp = eint_grp_save;
int i;
@@ -94,18 +94,18 @@ static int s3c64xx_irq_pm_resume(struct sys_device *dev)
}
S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
- return 0;
}
-static struct sysdev_driver s3c64xx_irq_driver = {
+struct syscore_ops s3c64xx_irq_syscore_ops = {
.suspend = s3c64xx_irq_pm_suspend,
.resume = s3c64xx_irq_pm_resume,
};
-static int __init s3c64xx_irq_pm_init(void)
+static __init int s3c64xx_syscore_init(void)
{
- return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
-}
+ register_syscore_ops(&s3c64xx_irq_syscore_ops);
-arch_initcall(s3c64xx_irq_pm_init);
+ return 0;
+}
+core_initcall(s3c64xx_syscore_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
index 4be4cc9abf7..07aa4d6054f 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -29,7 +29,7 @@
#define WPALCON_H (0x19c)
#define WPALCON_L (0x1a0)
-/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but
* different for WPAL2-4
*/
/* In WPALCON_L (aka WPALCON) */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index f16946e456e..be25879bb2e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
{
u32 ctrl2, ctrl3;
- /* don't need to alter anything acording to card-type */
+ /* don't need to alter anything according to card-type */
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index 1f4b595534c..a5a1e331f8e 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -18,7 +18,7 @@
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
-/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
/* GPIO bank sizes */
#define S5PV210_GPIO_A0_NR (8)
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 549d7924fd4..24febae3d4c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <plat/cpu.h>
@@ -140,7 +141,17 @@ static int s5pv210_pm_add(struct sys_device *sysdev)
return 0;
}
-static int s5pv210_pm_resume(struct sys_device *dev)
+static struct sysdev_driver s5pv210_pm_driver = {
+ .add = s5pv210_pm_add,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
+
+static void s5pv210_pm_resume(void)
{
u32 tmp;
@@ -150,17 +161,15 @@ static int s5pv210_pm_resume(struct sys_device *dev)
__raw_writel(tmp , S5P_OTHERS);
s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
-
- return 0;
}
-static struct sysdev_driver s5pv210_pm_driver = {
- .add = s5pv210_pm_add,
+static struct syscore_ops s5pv210_pm_syscore_ops = {
.resume = s5pv210_pm_resume,
};
-static __init int s5pv210_pm_drvinit(void)
+static __init int s5pv210_pm_syscore_init(void)
{
- return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+ register_syscore_ops(&s5pv210_pm_syscore_ops);
+ return 0;
}
-arch_initcall(s5pv210_pm_drvinit);
+arch_initcall(s5pv210_pm_syscore_init);
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 746777d56df..3e3ac05bb7b 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
switch (width) {
case 8:
- /* GPG1[3:6] special-funtion 3 */
+ /* GPG1[3:6] special-function 3 */
s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
case 4:
- /* GPG0[3:6] special-funtion 2 */
+ /* GPG0[3:6] special-function 2 */
s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
default:
break;
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index c32e202731c..a83b6c909f6 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
{
u32 ctrl2, ctrl3;
- /* don't need to alter anything acording to card-type */
+ /* don't need to alter anything according to card-type */
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index e697691eed2..41252d22e65 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o
# LEDs support
obj-$(CONFIG_LEDS) += $(led-y)
-# Miscelaneous functions
+# Miscellaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_SA1100_SSP) += ssp.o
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 07d4e8ba371..aaa8acf76b7 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -68,7 +68,7 @@
* clock change in ROM and jump to that code from the kernel. The main
* disadvantage is that the ROM has to be modified, which is not
* possible on all SA-1100 platforms. Another disadvantage is that
- * jumping to ROM makes clock switching unecessary complicated.
+ * jumping to ROM makes clock switching unnecessary complicated.
*
* The idea behind this driver is that the memory configuration can be
* changed while running from DRAM (even with interrupts turned on!)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 4f7ea012e1e..bae8296f5db 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1794,7 +1794,7 @@
(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
-#define DCSR_RUN 0x00000001 /* DMA RUNing */
+#define DCSR_RUN 0x00000001 /* DMA running */
#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
#define DCSR_ERROR 0x00000004 /* DMA ERROR */
#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 423ddb3d65e..dfbf824a69f 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
@@ -234,7 +234,7 @@ static struct sa1100irq_state {
unsigned int iccr;
} sa1100irq_state;
-static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
+static int sa1100irq_suspend(void)
{
struct sa1100irq_state *st = &sa1100irq_state;
@@ -264,7 +264,7 @@ static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int sa1100irq_resume(struct sys_device *dev)
+static void sa1100irq_resume(void)
{
struct sa1100irq_state *st = &sa1100irq_state;
@@ -277,24 +277,17 @@ static int sa1100irq_resume(struct sys_device *dev)
ICMR = st->icmr;
}
- return 0;
}
-static struct sysdev_class sa1100irq_sysclass = {
- .name = "sa11x0-irq",
+static struct syscore_ops sa1100irq_syscore_ops = {
.suspend = sa1100irq_suspend,
.resume = sa1100irq_resume,
};
-static struct sys_device sa1100irq_device = {
- .id = 0,
- .cls = &sa1100irq_sysclass,
-};
-
static int __init sa1100irq_init_devicefs(void)
{
- sysdev_class_register(&sa1100irq_sysclass);
- return sysdev_register(&sa1100irq_device);
+ register_syscore_ops(&sa1100irq_syscore_ops);
+ return 0;
}
device_initcall(sa1100irq_init_devicefs);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 9d490c66891..f50b00bd18a 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags;
/**
* jornada_ssp_reverse - reverses input byte
*
- * we need to reverse all data we recieve from the mcu due to its physical location
+ * we need to reverse all data we receive from the mcu due to its physical location
* returns : 01110111 -> 11101110
*/
u8 inline jornada_ssp_reverse(u8 byte)
@@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev)
static int jornada_ssp_remove(struct platform_device *dev)
{
- /* Note that this doesnt actually remove the driver, since theres nothing to remove
+ /* Note that this doesn't actually remove the driver, since theres nothing to remove
* It just makes sure everything is turned off */
GPSR = GPIO_GPIO25;
ssp_exit();
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index ae4f3d80416..fa6602491d5 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -92,25 +92,11 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
static struct clock_event_device ckevt_sa1100_osmr0 = {
.name = "osmr0",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_next_event = sa1100_osmr0_set_next_event,
.set_mode = sa1100_osmr0_set_mode,
};
-static cycle_t sa1100_read_oscr(struct clocksource *s)
-{
- return OSCR;
-}
-
-static struct clocksource cksrc_sa1100_oscr = {
- .name = "oscr",
- .rating = 200,
- .read = sa1100_read_oscr,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static struct irqaction sa1100_timer_irq = {
.name = "ost0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
@@ -120,14 +106,13 @@ static struct irqaction sa1100_timer_irq = {
static void __init sa1100_timer_init(void)
{
- OIER = 0; /* disable any timer interrupts */
- OSSR = 0xf; /* clear status on all timers */
+ OIER = 0;
+ OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
3686400, SC_MULT, SC_SHIFT);
- ckevt_sa1100_osmr0.mult =
- div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift);
+ clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
ckevt_sa1100_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
ckevt_sa1100_osmr0.min_delta_ns =
@@ -136,7 +121,8 @@ static void __init sa1100_timer_init(void)
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_register_hz(&cksrc_sa1100_oscr, CLOCK_TICK_RATE);
+ clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_sa1100_osmr0);
}
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 783b66fa95f..1e35fa976d6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
&ap4evb_camera,
};
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
{
struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
int ret;
@@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void)
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
- if (ret < 0) {
+ if (ret < 0)
pr_err("Cannot set HDMI parent: %d\n", ret);
- goto out;
- }
out:
if (!IS_ERR(hdmi_ick))
clk_put(hdmi_ick);
- return ret;
}
-device_initcall(hdmi_init_pm_clock);
-
-static int __init fsi_init_pm_clock(void)
+static void __init fsi_init_pm_clock(void)
{
struct clk *fsia_ick;
int ret;
@@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void)
if (IS_ERR(fsia_ick)) {
ret = PTR_ERR(fsia_ick);
pr_err("Cannot get FSI ICK: %d\n", ret);
- return ret;
+ return;
}
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
@@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void)
pr_err("Cannot set FSI-A parent: %d\n", ret);
clk_put(fsia_ick);
-
- return ret;
}
-device_initcall(fsi_init_pm_clock);
/*
* FIXME !!
@@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void)
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+
+ hdmi_init_pm_clock();
+ fsi_init_pm_clock();
}
static void __init ap4evb_timer_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 8184d4d4f23..7da2ca24229 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = {
.name = "sh_fsi2_b_hdmi",
};
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
{
struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
int ret;
@@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void)
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
- if (ret < 0) {
+ if (ret < 0)
pr_err("Cannot set HDMI parent: %d\n", ret);
- goto out;
- }
out:
if (!IS_ERR(hdmi_ick))
clk_put(hdmi_ick);
- return ret;
}
-device_initcall(hdmi_init_pm_clock);
/* USB1 (Host) */
static void usb1_host_port_power(int port, int power)
@@ -1218,6 +1214,8 @@ static void __init mackerel_init(void)
sh7372_add_standard_devices();
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+
+ hdmi_init_pm_clock();
}
static void __init mackerel_timer_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h
index e11560a525a..21a59db638b 100644
--- a/arch/arm/mach-shmobile/include/mach/mmc.h
+++ b/arch/arm/mach-shmobile/include/mach/mmc.h
@@ -9,7 +9,7 @@
#ifdef CONFIG_MACH_AP4EVB
#include "mach/mmc-ap4eb.h"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
#include "mach/mmc-mackerel.h"
#else
#error "unsupported board."
diff --git a/arch/arm/mach-shmobile/include/mach/smp.h b/arch/arm/mach-shmobile/include/mach/smp.h
deleted file mode 100644
index 50db94e927a..00000000000
--- a/arch/arm/mach-shmobile/include/mach/smp.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
-#if defined(CONFIG_ARM_GIC)
- gic_raise_softirq(mask, ipi);
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 6d6a205bcf9..9320aff0a20 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -13,7 +13,7 @@
#ifdef CONFIG_MACH_AP4EVB
#define MACH_TYPE MACH_TYPE_AP4EVB
#include "mach/head-ap4evb.txt"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
#define MACH_TYPE MACH_TYPE_MACKEREL
#include "mach/head-mackerel.txt"
#else
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 65e879bab4d..f3888feb1c6 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/mach-types.h>
#include <mach/common.h>
@@ -57,6 +58,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
index 94912d3944d..2d1b67a59e4 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -18,152 +18,41 @@
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#ifdef CONFIG_PM_RUNTIME
-#define BIT_ONCE 0
-#define BIT_ACTIVE 1
-#define BIT_CLK_ENABLED 2
-struct pm_runtime_data {
- unsigned long flags;
- struct clk *clk;
-};
-
-static void __devres_release(struct device *dev, void *res)
-{
- struct pm_runtime_data *prd = res;
-
- dev_dbg(dev, "__devres_release()\n");
-
- if (test_bit(BIT_CLK_ENABLED, &prd->flags))
- clk_disable(prd->clk);
-
- if (test_bit(BIT_ACTIVE, &prd->flags))
- clk_put(prd->clk);
-}
-
-static struct pm_runtime_data *__to_prd(struct device *dev)
-{
- return devres_find(dev, __devres_release, NULL, NULL);
-}
-
-static void platform_pm_runtime_init(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
- prd->clk = clk_get(dev, NULL);
- if (!IS_ERR(prd->clk)) {
- set_bit(BIT_ACTIVE, &prd->flags);
- dev_info(dev, "clocks managed by runtime pm\n");
- }
- }
-}
-
-static void platform_pm_runtime_bug(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
- dev_err(dev, "runtime pm suspend before resume\n");
-}
-
-int platform_pm_runtime_suspend(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "platform_pm_runtime_suspend()\n");
-
- platform_pm_runtime_bug(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_disable(prd->clk);
- clear_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
-
-int platform_pm_runtime_resume(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "platform_pm_runtime_resume()\n");
-
- platform_pm_runtime_init(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_enable(prd->clk);
- set_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
-
-int platform_pm_runtime_idle(struct device *dev)
+static int default_platform_runtime_idle(struct device *dev)
{
/* suspend synchronously to disable clocks immediately */
return pm_runtime_suspend(dev);
}
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct pm_runtime_data *prd;
-
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
-
- if (action == BUS_NOTIFY_BIND_DRIVER) {
- prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
- if (prd)
- devres_add(dev, prd);
- else
- dev_err(dev, "unable to alloc memory for runtime pm\n");
- }
-
- return 0;
-}
-
-#else /* CONFIG_PM_RUNTIME */
-
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct clk *clk;
+static struct dev_power_domain default_power_domain = {
+ .ops = {
+ .runtime_suspend = pm_runtime_clk_suspend,
+ .runtime_resume = pm_runtime_clk_resume,
+ .runtime_idle = default_platform_runtime_idle,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain)
- switch (action) {
- case BUS_NOTIFY_BIND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_enable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced on\n");
- }
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_disable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced off\n");
- }
- break;
- }
+#else
- return 0;
-}
+#define DEFAULT_PWR_DOMAIN_PTR NULL
#endif /* CONFIG_PM_RUNTIME */
-static struct notifier_block platform_bus_notifier = {
- .notifier_call = platform_bus_notify
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+ .con_ids = { NULL, },
};
static int __init sh_pm_runtime_init(void)
{
- bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
deleted file mode 100644
index d156f76b379..00000000000
--- a/arch/arm/mach-stmp378x/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
-obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
deleted file mode 100644
index 1568ad404d5..00000000000
--- a/arch/arm/mach-stmp378x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x40008000
-params_phys-y := 0x40000100
-initrd_phys-y := 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
deleted file mode 100644
index 731a92286da..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale STMP378X
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #0xf0000000 @ vm address of IRQ controller
- ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT
- cmp \irqnr, #0x7f
- moveqs \irqnr, #0 @ Zero flag set for no IRQ
-
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
deleted file mode 100644
index cc59673becd..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/irqs.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Freescale STMP378X interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#define IRQ_DEBUG_UART 0
-#define IRQ_COMMS_RX 1
-#define IRQ_COMMS_TX 1
-#define IRQ_SSP2_ERROR 2
-#define IRQ_VDD5V 3
-#define IRQ_HEADPHONE_SHORT 4
-#define IRQ_DAC_DMA 5
-#define IRQ_DAC_ERROR 6
-#define IRQ_ADC_DMA 7
-#define IRQ_ADC_ERROR 8
-#define IRQ_SPDIF_DMA 9
-#define IRQ_SAIF2_DMA 9
-#define IRQ_SPDIF_ERROR 10
-#define IRQ_SAIF1_IRQ 10
-#define IRQ_SAIF2_IRQ 10
-#define IRQ_USB_CTRL 11
-#define IRQ_USB_WAKEUP 12
-#define IRQ_GPMI_DMA 13
-#define IRQ_SSP1_DMA 14
-#define IRQ_SSP_ERROR 15
-#define IRQ_GPIO0 16
-#define IRQ_GPIO1 17
-#define IRQ_GPIO2 18
-#define IRQ_SAIF1_DMA 19
-#define IRQ_SSP2_DMA 20
-#define IRQ_ECC8_IRQ 21
-#define IRQ_RTC_ALARM 22
-#define IRQ_UARTAPP_TX_DMA 23
-#define IRQ_UARTAPP_INTERNAL 24
-#define IRQ_UARTAPP_RX_DMA 25
-#define IRQ_I2C_DMA 26
-#define IRQ_I2C_ERROR 27
-#define IRQ_TIMER0 28
-#define IRQ_TIMER1 29
-#define IRQ_TIMER2 30
-#define IRQ_TIMER3 31
-#define IRQ_BATT_BRNOUT 32
-#define IRQ_VDDD_BRNOUT 33
-#define IRQ_VDDIO_BRNOUT 34
-#define IRQ_VDD18_BRNOUT 35
-#define IRQ_TOUCH_DETECT 36
-#define IRQ_LRADC_CH0 37
-#define IRQ_LRADC_CH1 38
-#define IRQ_LRADC_CH2 39
-#define IRQ_LRADC_CH3 40
-#define IRQ_LRADC_CH4 41
-#define IRQ_LRADC_CH5 42
-#define IRQ_LRADC_CH6 43
-#define IRQ_LRADC_CH7 44
-#define IRQ_LCDIF_DMA 45
-#define IRQ_LCDIF_ERROR 46
-#define IRQ_DIGCTL_DEBUG_TRAP 47
-#define IRQ_RTC_1MSEC 48
-#define IRQ_DRI_DMA 49
-#define IRQ_DRI_ATTENTION 50
-#define IRQ_GPMI_ATTENTION 51
-#define IRQ_IR 52
-#define IRQ_DCP_VMI 53
-#define IRQ_DCP 54
-#define IRQ_BCH 56
-#define IRQ_PXP 57
-#define IRQ_UARTAPP2_TX_DMA 58
-#define IRQ_UARTAPP2_INTERNAL 59
-#define IRQ_UARTAPP2_RX_DMA 60
-#define IRQ_VDAC_DETECT 61
-#define IRQ_VDD5V_DROOP 64
-#define IRQ_DCDC4P2_BO 65
-
-
-#define NR_REAL_IRQS 128
-#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
-
-/* All interrupts are FIQ capable */
-#define FIQ_START IRQ_DEBUG_UART
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
deleted file mode 100644
index 93f952d3596..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/pins.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Freescale STMP378X SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
- * interface this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17)
-#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
-#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26)
-#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27)
-#define PINID_AUART1_RX STMP3XXX_PINID(0, 28)
-#define PINID_AUART1_TX STMP3XXX_PINID(0, 29)
-#define PINID_I2C_SCL STMP3XXX_PINID(0, 30)
-#define PINID_I2C_SDA STMP3XXX_PINID(0, 31)
-
-/* Bank 1 */
-#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
-#define PINID_LCD_D16 STMP3XXX_PINID(1, 16)
-#define PINID_LCD_D17 STMP3XXX_PINID(1, 17)
-#define PINID_LCD_RESET STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RS STMP3XXX_PINID(1, 19)
-#define PINID_LCD_WR STMP3XXX_PINID(1, 20)
-#define PINID_LCD_CS STMP3XXX_PINID(1, 21)
-#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22)
-#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23)
-#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24)
-#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25)
-#define PINID_PWM0 STMP3XXX_PINID(1, 26)
-#define PINID_PWM1 STMP3XXX_PINID(1, 27)
-#define PINID_PWM2 STMP3XXX_PINID(1, 28)
-#define PINID_PWM3 STMP3XXX_PINID(1, 29)
-#define PINID_PWM4 STMP3XXX_PINID(1, 30)
-
-/* Bank 2 */
-#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0)
-#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1)
-#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2)
-#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3)
-#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4)
-#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5)
-#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6)
-#define PINID_ROTARYA STMP3XXX_PINID(2, 7)
-#define PINID_ROTARYB STMP3XXX_PINID(2, 8)
-#define PINID_EMI_A00 STMP3XXX_PINID(2, 9)
-#define PINID_EMI_A01 STMP3XXX_PINID(2, 10)
-#define PINID_EMI_A02 STMP3XXX_PINID(2, 11)
-#define PINID_EMI_A03 STMP3XXX_PINID(2, 12)
-#define PINID_EMI_A04 STMP3XXX_PINID(2, 13)
-#define PINID_EMI_A05 STMP3XXX_PINID(2, 14)
-#define PINID_EMI_A06 STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A07 STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A08 STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A09 STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A10 STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A11 STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A12 STMP3XXX_PINID(2, 21)
-#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22)
-#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23)
-#define PINID_EMI_CASN STMP3XXX_PINID(2, 24)
-#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25)
-#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26)
-#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27)
-#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28)
-#define PINID_EMI_CKE STMP3XXX_PINID(2, 29)
-#define PINID_EMI_RASN STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
deleted file mode 100644
index dbcf85b6ac2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * stmp378x: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
-#define REGS_APBH_PHYS 0x80004000
-#define REGS_APBH_SIZE 0x2000
-
-#define HW_APBH_CTRL0 0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL 16
-#define BM_APBH_CTRL0_CLKGATE 0x40000000
-#define BM_APBH_CTRL0_SFTRST 0x80000000
-
-#define HW_APBH_CTRL1 0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
-
-#define HW_APBH_CTRL2 0x20
-
-#define HW_APBH_DEVSEL 0x30
-
-#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR 0x50
-
-#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBH_CHn_CMD_COMMAND 0x00000003
-#define BP_APBH_CHn_CMD_COMMAND 0
-#define BM_APBH_CHn_CMD_CHAIN 0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS 12
-#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA 0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE 16
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
deleted file mode 100644
index 3b934a4d27f..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * stmp378x: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
-#define REGS_APBX_PHYS 0x80024000
-#define REGS_APBX_SIZE 0x2000
-
-#define HW_APBX_CTRL0 0x0
-#define BM_APBX_CTRL0_CLKGATE 0x40000000
-#define BM_APBX_CTRL0_SFTRST 0x80000000
-
-#define HW_APBX_CTRL1 0x10
-
-#define HW_APBX_CTRL2 0x20
-
-#define HW_APBX_CHANNEL_CTRL 0x30
-#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000
-#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16
-
-#define HW_APBX_DEVSEL 0x40
-
-#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR 0x110
-#define BM_APBX_CHn_CMD_COMMAND 0x00000003
-#define BP_APBX_CHn_CMD_COMMAND 0
-#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBX_CHn_CMD_CHAIN 0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100
-#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS 12
-#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70)
-#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70)
-#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70)
-#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70)
-#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70)
-#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70)
-#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70)
-#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70)
-#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70)
-#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70)
-#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70)
-#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70)
-#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70)
-#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70)
-#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70)
-#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR 0x130
-
-#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA 0x140
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE 16
-
-#endif
-
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
deleted file mode 100644
index 641ac6126f8..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
-#define REGS_AUDIOIN_PHYS 0x8004C000
-#define REGS_AUDIOIN_SIZE 0x2000
-
-#define HW_AUDIOIN_CTRL 0x0
-#define BM_AUDIOIN_CTRL_RUN 0x00000001
-#define BP_AUDIOIN_CTRL_RUN 0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOIN_STAT 0x10
-
-#define HW_AUDIOIN_ADCSRR 0x20
-
-#define HW_AUDIOIN_ADCVOLUME 0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
-
-#define HW_AUDIOIN_ADCDEBUG 0x40
-
-#define HW_AUDIOIN_ADCVOL 0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
-#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
-
-#define HW_AUDIOIN_MICLINE 0x60
-
-#define HW_AUDIOIN_ANACLKCTRL 0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOIN_DATA 0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
deleted file mode 100644
index f533e23694a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * stmp378x: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
-#define REGS_AUDIOOUT_PHYS 0x80048000
-#define REGS_AUDIOOUT_SIZE 0x2000
-
-#define HW_AUDIOOUT_CTRL 0x0
-#define BM_AUDIOOUT_CTRL_RUN 0x00000001
-#define BP_AUDIOOUT_CTRL_RUN 0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOOUT_STAT 0x10
-
-#define HW_AUDIOOUT_DACSRR 0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
-#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT 16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
-#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT 28
-
-#define HW_AUDIOOUT_DACVOLUME 0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG 0x40
-
-#define HW_AUDIOOUT_HPVOL 0x50
-#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
-
-#define HW_AUDIOOUT_PWRDN 0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
-#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
-#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000
-
-#define HW_AUDIOOUT_REFCTRL 0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
-
-#define HW_AUDIOOUT_ANACTRL 0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
-
-#define HW_AUDIOOUT_TEST 0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
-
-#define HW_AUDIOOUT_BISTCTRL 0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0 0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1 0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL 0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOOUT_DATA 0xF0
-
-#define HW_AUDIOOUT_SPEAKERCTRL 0x100
-#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000
-
-#define HW_AUDIOOUT_VERSION 0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
deleted file mode 100644
index 532d2465071..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-bch.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * stmp378x: BCH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000)
-#define REGS_BCH_PHYS 0x8000A000
-#define REGS_BCH_SIZE 0x2000
-
-#define HW_BCH_CTRL 0x0
-#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_BCH_CTRL_COMPLETE_IRQ 0
-#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
-
-#define HW_BCH_STATUS0 0x10
-#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_BCH_STATUS0_CORRECTED 0x00000008
-#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
-#define BP_BCH_STATUS0_STATUS_BLK0 8
-#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_BCH_STATUS0_COMPLETED_CE 16
-
-#define HW_BCH_LAYOUTSELECT 0x70
-
-#define HW_BCH_FLASH0LAYOUT0 0x80
-#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
-#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000
-#define BP_BCH_FLASH0LAYOUT0_ECC0 12
-#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
-#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
-#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
-#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
-#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
-#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000
-#define BP_BCH_FLASH0LAYOUT1_ECCN 12
-#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
-#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
-
-#define HW_BCH_BLOCKNAME 0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
deleted file mode 100644
index 7c546afd57a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * stmp378x: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
-#define REGS_CLKCTRL_PHYS 0x80040000
-#define REGS_CLKCTRL_SIZE 0x2000
-
-#define HW_CLKCTRL_PLLCTRL0 0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-
-#define HW_CLKCTRL_CPU 0x20
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-
-#define HW_CLKCTRL_HBUS 0x30
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BP_CLKCTRL_HBUS_DIV 0
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
-
-#define HW_CLKCTRL_XBUS 0x40
-
-#define HW_CLKCTRL_XTAL 0x50
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
-
-#define HW_CLKCTRL_PIX 0x60
-#define BM_CLKCTRL_PIX_DIV 0x00000FFF
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_SSP 0x70
-
-#define HW_CLKCTRL_GPMI 0x80
-
-#define HW_CLKCTRL_SPDIF 0x90
-
-#define HW_CLKCTRL_EMI 0xA0
-#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
-#define BP_CLKCTRL_EMI_DIV_EMI 0
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
-
-#define HW_CLKCTRL_IR 0xB0
-
-#define HW_CLKCTRL_SAIF 0xC0
-
-#define HW_CLKCTRL_TV 0xD0
-
-#define HW_CLKCTRL_ETM 0xE0
-
-#define HW_CLKCTRL_FRAC 0xF0
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-
-#define HW_CLKCTRL_FRAC1 0x100
-
-#define HW_CLKCTRL_CLKSEQ 0x110
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-
-#define HW_CLKCTRL_RESET 0x120
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-#define BP_CLKCTRL_RESET_DIG 0
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
deleted file mode 100644
index fdedd00c0e2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: DCP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000)
-#define REGS_DCP_PHYS 0x80028000
-#define REGS_DCP_SIZE 0x2000
-
-#define HW_DCP_CTRL 0x0
-#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF
-#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0
-#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000
-#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000
-#define BM_DCP_CTRL_CLKGATE 0x40000000
-#define BM_DCP_CTRL_SFTRST 0x80000000
-
-#define HW_DCP_STAT 0x10
-#define BM_DCP_STAT_IRQ 0x0000000F
-#define BP_DCP_STAT_IRQ 0
-
-#define HW_DCP_CHANNELCTRL 0x20
-#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF
-#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0
-
-#define HW_DCP_CONTEXT 0x50
-#define BM_DCP_PACKET1_INTERRUPT 0x00000001
-#define BP_DCP_PACKET1_INTERRUPT 0
-#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002
-#define BM_DCP_PACKET1_CHAIN 0x00000004
-#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008
-#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020
-#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040
-#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100
-#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200
-#define BM_DCP_PACKET1_OTP_KEY 0x00000400
-#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800
-#define BM_DCP_PACKET1_HASH_INIT 0x00001000
-#define BM_DCP_PACKET1_HASH_TERM 0x00002000
-#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F
-#define BP_DCP_PACKET2_CIPHER_SELECT 0
-#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0
-#define BP_DCP_PACKET2_CIPHER_MODE 4
-#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00
-#define BP_DCP_PACKET2_KEY_SELECT 8
-#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000
-#define BP_DCP_PACKET2_HASH_SELECT 16
-#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000
-#define BP_DCP_PACKET2_CIPHER_CFG 24
-
-#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40)
-#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40)
-#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40)
-#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40)
-
-#define HW_DCP_CHnCMDPTR 0x100
-
-#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40)
-#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40)
-#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40)
-#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40)
-
-#define HW_DCP_CHnSEMA 0x110
-#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF
-#define BP_DCP_CHnSEMA_INCREMENT 0
-
-#define HW_DCP_CH0STAT (0x120 + 0 * 0x40)
-#define HW_DCP_CH1STAT (0x120 + 1 * 0x40)
-#define HW_DCP_CH2STAT (0x120 + 2 * 0x40)
-#define HW_DCP_CH3STAT (0x120 + 3 * 0x40)
-
-#define HW_DCP_CHnSTAT 0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
deleted file mode 100644
index 5293005523b..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * stmp378x: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
-#define REGS_DIGCTL_PHYS 0x8001C000
-#define REGS_DIGCTL_SIZE 0x2000
-
-#define HW_DIGCTL_CTRL 0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
-
-#define HW_DIGCTL_ARMCACHE 0x2B0
-#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003
-#define BP_DIGCTL_ARMCACHE_ITAG_SS 0
-#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030
-#define BP_DIGCTL_ARMCACHE_DTAG_SS 4
-#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300
-#define BP_DIGCTL_ARMCACHE_CACHE_SS 8
-#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000
-#define BP_DIGCTL_ARMCACHE_DRTY_SS 12
-#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000
-#define BP_DIGCTL_ARMCACHE_VALID_SS 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
deleted file mode 100644
index 02851431677..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dram.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * stmp378x: DRAM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000)
-#define REGS_DRAM_PHYS 0x800E0000
-#define REGS_DRAM_SIZE 0x2000
-
-#define HW_DRAM_CTL06 0x18
-
-#define HW_DRAM_CTL08 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
deleted file mode 100644
index da25f7e397e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-dri.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: DRI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000)
-#define REGS_DRI_PHYS 0x80074000
-#define REGS_DRI_SIZE 0x2000
-
-#define HW_DRI_CTRL 0x0
-#define BM_DRI_CTRL_RUN 0x00000001
-#define BP_DRI_CTRL_RUN 0
-#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004
-#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008
-#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400
-#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800
-#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000
-#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000
-#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000
-#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000
-#define BM_DRI_CTRL_CLKGATE 0x40000000
-#define BM_DRI_CTRL_SFTRST 0x80000000
-
-#define HW_DRI_TIMING 0x10
-#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF
-#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0
-#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000
-#define BP_DRI_TIMING_PILOT_REP_RATE 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
deleted file mode 100644
index cc353bec331..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * stmp378x: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
-#define REGS_ECC8_PHYS 0x80008000
-#define REGS_ECC8_SIZE 0x2000
-
-#define HW_ECC8_CTRL 0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ 0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
-
-#define HW_ECC8_STATUS0 0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_ECC8_STATUS0_CORRECTED 0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX 8
-#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE 16
-
-#define HW_ECC8_STATUS1 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
deleted file mode 100644
index 98773fc33d7..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-emi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * stmp378x: EMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000)
-#define REGS_EMI_PHYS 0x80020000
-#define REGS_EMI_SIZE 0x2000
-
-#define HW_EMI_STAT 0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
deleted file mode 100644
index 2cc8bbe9168..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * stmp378x: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS 0x8000C000
-#define REGS_GPMI_SIZE 0x2000
-
-#define HW_GPMI_CTRL0 0x0
-#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT 0
-#define BM_GPMI_CTRL0_CS 0x00300000
-#define BP_GPMI_CTRL0_CS 20
-#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
-#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
-#define BP_GPMI_CTRL0_ADDRESS 17
-#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
-#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
-#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
-#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
-#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE 24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
-#define BM_GPMI_CTRL0_RUN 0x20000000
-#define BM_GPMI_CTRL0_CLKGATE 0x40000000
-#define BM_GPMI_CTRL0_SFTRST 0x80000000
-#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
-#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
-#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD 13
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3
-
-#define HW_GPMI_CTRL1 0x60
-#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
-#define BP_GPMI_CTRL1_GPMI_MODE 0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
-#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
-#define BP_GPMI_CTRL1_RDN_DELAY 12
-#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
-
-#define HW_GPMI_TIMING0 0x70
-#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP 0
-#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD 8
-#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
-#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
-
-#define HW_GPMI_TIMING1 0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
deleted file mode 100644
index 13a234c9943..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * stmp378x: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS 0x80058000
-#define REGS_I2C_SIZE 0x2000
-
-#define HW_I2C_CTRL0 0x0
-#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT 0
-#define BM_I2C_CTRL0_DIRECTION 0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
-#define BM_I2C_CTRL0_CLKGATE 0x40000000
-#define BM_I2C_CTRL0_SFTRST 0x80000000
-
-#define HW_I2C_TIMING0 0x10
-
-#define HW_I2C_TIMING1 0x20
-
-#define HW_I2C_TIMING2 0x30
-
-#define HW_I2C_CTRL1 0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ 0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
-
-#define HW_I2C_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
deleted file mode 100644
index f996e80f40e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * stmp378x: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
-#define REGS_ICOLL_PHYS 0x80000000
-#define REGS_ICOLL_SIZE 0x2000
-
-#define HW_ICOLL_VECTOR 0x0
-
-#define HW_ICOLL_LEVELACK 0x10
-#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F
-#define BP_ICOLL_LEVELACK_IRQLEVELACK 0
-
-#define HW_ICOLL_CTRL 0x20
-#define BM_ICOLL_CTRL_CLKGATE 0x40000000
-#define BM_ICOLL_CTRL_SFTRST 0x80000000
-
-#define HW_ICOLL_STAT 0x70
-
-#define HW_ICOLL_INTERRUPTn 0x120
-
-#define HW_ICOLL_INTERRUPTn 0x120
-#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ir.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
deleted file mode 100644
index a5b4ef10fab..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ir.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: IR register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000)
-#define REGS_IR_PHYS 0x80078000
-#define REGS_IR_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
deleted file mode 100644
index 9cdbef4badc..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * stmp378x: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS 0x80030000
-#define REGS_LCDIF_SIZE 0x2000
-
-#define HW_LCDIF_CTRL 0x0
-#define BM_LCDIF_CTRL_RUN 0x00000001
-#define BP_LCDIF_CTRL_RUN 0
-#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020
-#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080
-#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300
-#define BP_LCDIF_CTRL_WORD_LENGTH 8
-#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00
-#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10
-#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000
-#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14
-#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000
-#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000
-#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000
-#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000
-#define BM_LCDIF_CTRL_DVI_MODE 0x00100000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000
-#define BM_LCDIF_CTRL_CLKGATE 0x40000000
-#define BM_LCDIF_CTRL_SFTRST 0x80000000
-
-#define HW_LCDIF_CTRL1 0x10
-#define BM_LCDIF_CTRL1_RESET 0x00000001
-#define BP_LCDIF_CTRL1_RESET 0
-#define BM_LCDIF_CTRL1_MODE86 0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
-#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000
-#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000
-
-#define HW_LCDIF_TRANSFER_COUNT 0x20
-#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF
-#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0
-#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000
-#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16
-
-#define HW_LCDIF_CUR_BUF 0x30
-
-#define HW_LCDIF_NEXT_BUF 0x40
-
-#define HW_LCDIF_TIMING 0x60
-
-#define HW_LCDIF_VDCTRL0 0x70
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF
-#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
-
-#define HW_LCDIF_VDCTRL1 0x80
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
-
-#define HW_LCDIF_VDCTRL2 0x90
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24
-
-#define HW_LCDIF_VDCTRL3 0xA0
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16
-
-#define HW_LCDIF_VDCTRL4 0xB0
-#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF
-#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000
-
-#define HW_LCDIF_DVICTRL0 0xC0
-#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF
-#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0
-#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00
-#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10
-#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000
-#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20
-
-#define HW_LCDIF_DVICTRL1 0xD0
-#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL1_F2_START_LINE 0
-#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL1_F1_END_LINE 10
-#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL1_F1_START_LINE 20
-
-#define HW_LCDIF_DVICTRL2 0xE0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10
-#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL2_F2_END_LINE 20
-
-#define HW_LCDIF_DVICTRL3 0xF0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000
-#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16
-
-#define HW_LCDIF_DVICTRL4 0x100
-#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF
-#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0
-#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00
-#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8
-#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000
-#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16
-#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000
-#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24
-
-#define HW_LCDIF_CSC_COEFF0 0x110
-#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003
-#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0
-#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000
-#define BP_LCDIF_CSC_COEFF0_C0 16
-
-#define HW_LCDIF_CSC_COEFF1 0x120
-#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF
-#define BP_LCDIF_CSC_COEFF1_C1 0
-#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000
-#define BP_LCDIF_CSC_COEFF1_C2 16
-
-#define HW_LCDIF_CSC_COEFF2 0x130
-#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF
-#define BP_LCDIF_CSC_COEFF2_C3 0
-#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000
-#define BP_LCDIF_CSC_COEFF2_C4 16
-
-#define HW_LCDIF_CSC_COEFF3 0x140
-#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF
-#define BP_LCDIF_CSC_COEFF3_C5 0
-#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000
-#define BP_LCDIF_CSC_COEFF3_C6 16
-
-#define HW_LCDIF_CSC_COEFF4 0x150
-#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF
-#define BP_LCDIF_CSC_COEFF4_C7 0
-#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000
-#define BP_LCDIF_CSC_COEFF4_C8 16
-
-#define HW_LCDIF_CSC_OFFSET 0x160
-#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF
-#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0
-#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000
-#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16
-
-#define HW_LCDIF_CSC_LIMIT 0x170
-#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF
-#define BP_LCDIF_CSC_LIMIT_Y_MAX 0
-#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00
-#define BP_LCDIF_CSC_LIMIT_Y_MIN 8
-#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16
-#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24
-
-#define HW_LCDIF_STAT 0x1D0
-#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
deleted file mode 100644
index cb8cb06f827..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * stmp378x: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
-#define REGS_LRADC_PHYS 0x80050000
-#define REGS_LRADC_SIZE 0x2000
-
-#define HW_LRADC_CTRL0 0x0
-#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE 0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
-#define BM_LRADC_CTRL0_CLKGATE 0x40000000
-#define BM_LRADC_CTRL0_SFTRST 0x80000000
-
-#define HW_LRADC_CTRL1 0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ 0
-#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
-
-#define HW_LRADC_CTRL2 0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
-
-#define HW_LRADC_CTRL3 0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME 8
-
-#define HW_LRADC_STATUS 0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
-
-#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
-#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
-#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
-#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
-#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
-#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
-#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
-#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn 0x50
-#define BM_LRADC_CHn_VALUE 0x0003FFFF
-#define BP_LRADC_CHn_VALUE 0
-#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES 24
-#define BM_LRADC_CHn_ACCUMULATE 0x20000000
-
-#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn 0xD0
-#define BM_LRADC_DELAYn_DELAY 0x000007FF
-#define BP_LRADC_DELAYn_DELAY 0
-#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT 11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
-#define BM_LRADC_DELAYn_KICK 0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
-
-#define HW_LRADC_CTRL4 0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT 24
-#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT 28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
deleted file mode 100644
index f0af64d9937..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: OCOTP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000)
-#define REGS_OCOTP_PHYS 0x8002C000
-#define REGS_OCOTP_SIZE 0x2000
-
-#define HW_OCOTP_CTRL 0x0
-#define BM_OCOTP_CTRL_BUSY 0x00000100
-#define BM_OCOTP_CTRL_ERROR 0x00000200
-#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000
-#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000
-#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000
-#define BP_OCOTP_CTRL_WR_UNLOCK 16
-
-#define HW_OCOTP_DATA 0x10
-
-#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10)
-#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10)
-#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10)
-#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10)
-
-#define HW_OCOTP_CUSTn 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
deleted file mode 100644
index 50d90ea1b13..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * stmp378x: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
-#define REGS_PINCTRL_PHYS 0x80018000
-#define REGS_PINCTRL_SIZE 0x2000
-
-#define HW_PINCTRL_MUXSEL0 0x100
-#define HW_PINCTRL_MUXSEL1 0x110
-#define HW_PINCTRL_MUXSEL2 0x120
-#define HW_PINCTRL_MUXSEL3 0x130
-#define HW_PINCTRL_MUXSEL4 0x140
-#define HW_PINCTRL_MUXSEL5 0x150
-#define HW_PINCTRL_MUXSEL6 0x160
-#define HW_PINCTRL_MUXSEL7 0x170
-
-#define HW_PINCTRL_DRIVE0 0x200
-#define HW_PINCTRL_DRIVE1 0x210
-#define HW_PINCTRL_DRIVE2 0x220
-#define HW_PINCTRL_DRIVE3 0x230
-#define HW_PINCTRL_DRIVE4 0x240
-#define HW_PINCTRL_DRIVE5 0x250
-#define HW_PINCTRL_DRIVE6 0x260
-#define HW_PINCTRL_DRIVE7 0x270
-#define HW_PINCTRL_DRIVE8 0x280
-#define HW_PINCTRL_DRIVE9 0x290
-#define HW_PINCTRL_DRIVE10 0x2A0
-#define HW_PINCTRL_DRIVE11 0x2B0
-#define HW_PINCTRL_DRIVE12 0x2C0
-#define HW_PINCTRL_DRIVE13 0x2D0
-#define HW_PINCTRL_DRIVE14 0x2E0
-
-#define HW_PINCTRL_PULL0 0x400
-#define HW_PINCTRL_PULL1 0x410
-#define HW_PINCTRL_PULL2 0x420
-#define HW_PINCTRL_PULL3 0x430
-
-#define HW_PINCTRL_DOUT0 0x500
-#define HW_PINCTRL_DOUT1 0x510
-#define HW_PINCTRL_DOUT2 0x520
-
-#define HW_PINCTRL_DIN0 0x600
-#define HW_PINCTRL_DIN1 0x610
-#define HW_PINCTRL_DIN2 0x620
-
-#define HW_PINCTRL_DOE0 0x700
-#define HW_PINCTRL_DOE1 0x710
-#define HW_PINCTRL_DOE2 0x720
-
-#define HW_PINCTRL_PIN2IRQ0 0x800
-#define HW_PINCTRL_PIN2IRQ1 0x810
-#define HW_PINCTRL_PIN2IRQ2 0x820
-
-#define HW_PINCTRL_IRQEN0 0x900
-#define HW_PINCTRL_IRQEN1 0x910
-#define HW_PINCTRL_IRQEN2 0x920
-
-#define HW_PINCTRL_IRQLEVEL0 0xA00
-#define HW_PINCTRL_IRQLEVEL1 0xA10
-#define HW_PINCTRL_IRQLEVEL2 0xA20
-
-#define HW_PINCTRL_IRQPOL0 0xB00
-#define HW_PINCTRL_IRQPOL1 0xB10
-#define HW_PINCTRL_IRQPOL2 0xB20
-
-#define HW_PINCTRL_IRQSTAT0 0xC00
-#define HW_PINCTRL_IRQSTAT1 0xC10
-#define HW_PINCTRL_IRQSTAT2 0xC20
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
deleted file mode 100644
index e454c830f07..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-power.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp378x: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
-#define REGS_POWER_PHYS 0x80044000
-#define REGS_POWER_SIZE 0x2000
-
-#define HW_POWER_CTRL 0x0
-#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001
-#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0
-#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000
-#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000
-#define BM_POWER_CTRL_CLKGATE 0x40000000
-
-#define HW_POWER_5VCTRL 0x10
-#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040
-
-#define HW_POWER_MINPWR 0x20
-
-#define HW_POWER_CHARGE 0x30
-
-#define HW_POWER_VDDDCTRL 0x40
-
-#define HW_POWER_VDDACTRL 0x50
-
-#define HW_POWER_VDDIOCTRL 0x60
-#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG 0
-
-#define HW_POWER_STS 0xC0
-#define BM_POWER_STS_VBUSVALID 0x00000002
-#define BM_POWER_STS_BVALID 0x00000004
-#define BM_POWER_STS_AVALID 0x00000008
-#define BM_POWER_STS_DC_OK 0x00000200
-
-#define HW_POWER_RESET 0x100
-
-#define HW_POWER_DEBUG 0x110
-#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
deleted file mode 100644
index 0d0f9e56ec7..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * stmp378x: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
-#define REGS_PWM_PHYS 0x80064000
-#define REGS_PWM_SIZE 0x2000
-
-#define HW_PWM_CTRL 0x0
-#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
-
-#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn 0x10
-#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE 0
-#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE 16
-
-#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn 0x20
-#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD 0
-#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE 16
-#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE 18
-#define BM_PWM_PERIODn_CDIV 0x00700000
-#define BP_PWM_PERIODn_CDIV 20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
deleted file mode 100644
index 54d297896de..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * stmp378x: PXP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000)
-#define REGS_PXP_PHYS 0x8002A000
-#define REGS_PXP_SIZE 0x2000
-
-#define HW_PXP_CTRL 0x0
-#define BM_PXP_CTRL_ENABLE 0x00000001
-#define BP_PXP_CTRL_ENABLE 0
-#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002
-#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0
-#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4
-#define BM_PXP_CTRL_ROTATE 0x00000300
-#define BP_PXP_CTRL_ROTATE 8
-#define BM_PXP_CTRL_HFLIP 0x00000400
-#define BM_PXP_CTRL_VFLIP 0x00000800
-#define BM_PXP_CTRL_S0_FORMAT 0x0000F000
-#define BP_PXP_CTRL_S0_FORMAT 12
-#define BM_PXP_CTRL_SCALE 0x00040000
-#define BM_PXP_CTRL_CROP 0x00080000
-
-#define HW_PXP_STAT 0x10
-#define BM_PXP_STAT_IRQ 0x00000001
-#define BP_PXP_STAT_IRQ 0
-
-#define HW_PXP_RGBBUF 0x20
-
-#define HW_PXP_RGBSIZE 0x40
-#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF
-#define BP_PXP_RGBSIZE_HEIGHT 0
-#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000
-#define BP_PXP_RGBSIZE_WIDTH 12
-
-#define HW_PXP_S0BUF 0x50
-
-#define HW_PXP_S0UBUF 0x60
-
-#define HW_PXP_S0VBUF 0x70
-
-#define HW_PXP_S0PARAM 0x80
-#define BM_PXP_S0PARAM_HEIGHT 0x000000FF
-#define BP_PXP_S0PARAM_HEIGHT 0
-#define BM_PXP_S0PARAM_WIDTH 0x0000FF00
-#define BP_PXP_S0PARAM_WIDTH 8
-#define BM_PXP_S0PARAM_YBASE 0x00FF0000
-#define BP_PXP_S0PARAM_YBASE 16
-#define BM_PXP_S0PARAM_XBASE 0xFF000000
-#define BP_PXP_S0PARAM_XBASE 24
-
-#define HW_PXP_S0BACKGROUND 0x90
-
-#define HW_PXP_S0CROP 0xA0
-#define BM_PXP_S0CROP_HEIGHT 0x000000FF
-#define BP_PXP_S0CROP_HEIGHT 0
-#define BM_PXP_S0CROP_WIDTH 0x0000FF00
-#define BP_PXP_S0CROP_WIDTH 8
-#define BM_PXP_S0CROP_YBASE 0x00FF0000
-#define BP_PXP_S0CROP_YBASE 16
-#define BM_PXP_S0CROP_XBASE 0xFF000000
-#define BP_PXP_S0CROP_XBASE 24
-
-#define HW_PXP_S0SCALE 0xB0
-#define BM_PXP_S0SCALE_XSCALE 0x00003FFF
-#define BP_PXP_S0SCALE_XSCALE 0
-#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000
-#define BP_PXP_S0SCALE_YSCALE 16
-
-#define HW_PXP_CSCCOEFF0 0xD0
-
-#define HW_PXP_CSCCOEFF1 0xE0
-
-#define HW_PXP_CSCCOEFF2 0xF0
-
-#define HW_PXP_S0COLORKEYLOW 0x180
-
-#define HW_PXP_S0COLORKEYHIGH 0x190
-
-#define HW_PXP_OL0 (0x200 + 0 * 0x40)
-#define HW_PXP_OL1 (0x200 + 1 * 0x40)
-#define HW_PXP_OL2 (0x200 + 2 * 0x40)
-#define HW_PXP_OL3 (0x200 + 3 * 0x40)
-#define HW_PXP_OL4 (0x200 + 4 * 0x40)
-#define HW_PXP_OL5 (0x200 + 5 * 0x40)
-#define HW_PXP_OL6 (0x200 + 6 * 0x40)
-#define HW_PXP_OL7 (0x200 + 7 * 0x40)
-
-#define HW_PXP_OLn 0x200
-
-#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40)
-#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40)
-#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40)
-#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40)
-#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40)
-#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40)
-#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40)
-#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40)
-
-#define HW_PXP_OLnSIZE 0x210
-#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF
-#define BP_PXP_OLnSIZE_HEIGHT 0
-#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00
-#define BP_PXP_OLnSIZE_WIDTH 8
-
-#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40)
-#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40)
-#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40)
-#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40)
-#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40)
-#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40)
-#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40)
-#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40)
-
-#define HW_PXP_OLnPARAM 0x220
-#define BM_PXP_OLnPARAM_ENABLE 0x00000001
-#define BP_PXP_OLnPARAM_ENABLE 0
-#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006
-#define BP_PXP_OLnPARAM_ALPHA_CNTL 1
-#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008
-#define BM_PXP_OLnPARAM_FORMAT 0x000000F0
-#define BP_PXP_OLnPARAM_FORMAT 4
-#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00
-#define BP_PXP_OLnPARAM_ALPHA 8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
deleted file mode 100644
index b8dbd6742d9..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * stmp378x: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS 0x8005C000
-#define REGS_RTC_SIZE 0x2000
-
-#define HW_RTC_CTRL 0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN 0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
-
-#define HW_RTC_STAT 0x10
-#define BM_RTC_STAT_NEW_REGS 0x0000FF00
-#define BP_RTC_STAT_NEW_REGS 8
-#define BM_RTC_STAT_STALE_REGS 0x00FF0000
-#define BP_RTC_STAT_STALE_REGS 16
-#define BM_RTC_STAT_RTC_PRESENT 0x80000000
-
-#define HW_RTC_SECONDS 0x30
-
-#define HW_RTC_ALARM 0x40
-
-#define HW_RTC_WATCHDOG 0x50
-
-#define HW_RTC_PERSISTENT0 0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
-
-#define HW_RTC_PERSISTENT1 0x70
-#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF
-#define BP_RTC_PERSISTENT1_GENERAL 0
-
-#define HW_RTC_VERSION 0xD0
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-saif.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
deleted file mode 100644
index 6df41762c2a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-saif.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * stmp378x: SAIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SAIF_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
deleted file mode 100644
index 801539848c2..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * stmp378x: SPDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000)
-#define REGS_SPDIF_PHYS 0x80054000
-#define REGS_SPDIF_SIZE 0x2000
-
-#define HW_SPDIF_CTRL 0x0
-#define BM_SPDIF_CTRL_RUN 0x00000001
-#define BP_SPDIF_CTRL_RUN 0
-#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010
-#define BM_SPDIF_CTRL_CLKGATE 0x40000000
-#define BM_SPDIF_CTRL_SFTRST 0x80000000
-
-#define HW_SPDIF_STAT 0x10
-
-#define HW_SPDIF_FRAMECTRL 0x20
-
-#define HW_SPDIF_SRR 0x30
-#define BM_SPDIF_SRR_RATE 0x000FFFFF
-#define BP_SPDIF_SRR_RATE 0
-#define BM_SPDIF_SRR_BASEMULT 0x70000000
-#define BP_SPDIF_SRR_BASEMULT 28
-
-#define HW_SPDIF_DEBUG 0x40
-
-#define HW_SPDIF_DATA 0x50
-
-#define HW_SPDIF_VERSION 0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
deleted file mode 100644
index 28aacf0f58e..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * stmp378x: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS 0x80010000
-#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000)
-#define REGS_SSP2_PHYS 0x80034000
-#define REGS_SSP_SIZE 0x2000
-
-#define HW_SSP_CTRL0 0x0
-#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT 0
-#define BM_SSP_CTRL0_ENABLE 0x00010000
-#define BM_SSP_CTRL0_GET_RESP 0x00020000
-#define BM_SSP_CTRL0_LONG_RESP 0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH 22
-#define BM_SSP_CTRL0_DATA_XFER 0x01000000
-#define BM_SSP_CTRL0_READ 0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
-#define BM_SSP_CTRL0_LOCK_CS 0x08000000
-#define BM_SSP_CTRL0_RUN 0x20000000
-#define BM_SSP_CTRL0_CLKGATE 0x40000000
-#define BM_SSP_CTRL0_SFTRST 0x80000000
-
-#define HW_SSP_CMD0 0x10
-#define BM_SSP_CMD0_CMD 0x000000FF
-#define BP_SSP_CMD0_CMD 0
-#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT 8
-#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE 16
-#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
-#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG 0
-
-#define HW_SSP_TIMING 0x50
-#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE 0
-#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE 8
-#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT 16
-
-#define HW_SSP_CTRL1 0x60
-#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE 0
-#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH 4
-#define BM_SSP_CTRL1_POLARITY 0x00000200
-#define BM_SSP_CTRL1_PHASE 0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
-
-#define HW_SSP_DATA 0x70
-
-#define HW_SSP_SDRESP0 0x80
-
-#define HW_SSP_SDRESP1 0x90
-
-#define HW_SSP_SDRESP2 0xA0
-
-#define HW_SSP_SDRESP3 0xB0
-
-#define HW_SSP_STATUS 0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
-#define BM_SSP_STATUS_TIMEOUT 0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
-#define BM_SSP_STATUS_RESP_ERR 0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
-#define BM_SSP_STATUS_CARD_DETECT 0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
deleted file mode 100644
index 08343a8b556..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * stmp378x: SYDMA register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000)
-#define REGS_SYDMA_PHYS 0x80026000
-#define REGS_SYDMA_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
deleted file mode 100644
index b5527957c67..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * stmp378x: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
-#define REGS_TIMROT_PHYS 0x80068000
-#define REGS_TIMROT_SIZE 0x2000
-
-#define HW_TIMROT_ROTCTRL 0x0
-#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007
-#define BP_TIMROT_ROTCTRL_SELECT_A 0
-#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070
-#define BP_TIMROT_ROTCTRL_SELECT_B 4
-#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100
-#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200
-#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00
-#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10
-#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000
-#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000
-#define BP_TIMROT_ROTCTRL_DIVIDER 16
-#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000
-#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
-
-#define HW_TIMROT_ROTCOUNT 0x10
-#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF
-#define BP_TIMROT_ROTCOUNT_UPDOWN 0
-
-#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn 0x20
-#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE 4
-#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
-
-#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn 0x30
-
-#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
deleted file mode 100644
index 7f895cb3435..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * stmp378x: TVENC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000)
-#define REGS_TVENC_PHYS 0x80038000
-#define REGS_TVENC_SIZE 0x2000
-
-#define HW_TVENC_CTRL 0x0
-#define BM_TVENC_CTRL_CLKGATE 0x40000000
-#define BM_TVENC_CTRL_SFTRST 0x80000000
-
-#define HW_TVENC_CONFIG 0x10
-#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007
-#define BP_TVENC_CONFIG_ENCD_MODE 0
-#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070
-#define BP_TVENC_CONFIG_SYNC_MODE 4
-#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200
-#define BM_TVENC_CONFIG_CGAIN 0x0000C000
-#define BP_TVENC_CONFIG_CGAIN 14
-#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000
-#define BP_TVENC_CONFIG_YGAIN_SEL 16
-#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000
-
-#define HW_TVENC_SYNCOFFSET 0x30
-
-#define HW_TVENC_COLORSUB0 0xC0
-
-#define HW_TVENC_COLORBURST 0x140
-#define BM_TVENC_COLORBURST_PBA 0x00FF0000
-#define BP_TVENC_COLORBURST_PBA 16
-#define BM_TVENC_COLORBURST_NBA 0xFF000000
-#define BP_TVENC_COLORBURST_NBA 24
-
-#define HW_TVENC_MACROVISION0 0x150
-
-#define HW_TVENC_MACROVISION1 0x160
-
-#define HW_TVENC_MACROVISION2 0x170
-
-#define HW_TVENC_MACROVISION3 0x180
-
-#define HW_TVENC_MACROVISION4 0x190
-
-#define HW_TVENC_DACCTRL 0x1A0
-#define BM_TVENC_DACCTRL_RVAL 0x00000070
-#define BP_TVENC_DACCTRL_RVAL 4
-#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100
-#define BM_TVENC_DACCTRL_PWRUP1 0x00001000
-#define BM_TVENC_DACCTRL_GAINUP 0x00040000
-#define BM_TVENC_DACCTRL_GAINDN 0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
deleted file mode 100644
index a251e68bb3a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * stmp378x: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS 0x8006C000
-#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000)
-#define REGS_UARTAPP2_PHYS 0x8006E000
-#define REGS_UARTAPP_SIZE 0x2000
-
-#define HW_UARTAPP_CTRL0 0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT 0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
-#define BM_UARTAPP_CTRL0_RUN 0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT 0
-#define BM_UARTAPP_CTRL1_RUN 0x10000000
-
-#define HW_UARTAPP_CTRL2 0x20
-#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN 0
-#define BM_UARTAPP_CTRL2_TXE 0x00000100
-#define BM_UARTAPP_CTRL2_RXE 0x00000200
-#define BM_UARTAPP_CTRL2_RTS 0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
-
-#define HW_UARTAPP_LINECTRL 0x30
-#define BM_UARTAPP_LINECTRL_BRK 0x00000001
-#define BP_UARTAPP_LINECTRL_BRK 0
-#define BM_UARTAPP_LINECTRL_PEN 0x00000002
-#define BM_UARTAPP_LINECTRL_EPS 0x00000004
-#define BM_UARTAPP_LINECTRL_STP2 0x00000008
-#define BM_UARTAPP_LINECTRL_FEN 0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN 5
-#define BM_UARTAPP_LINECTRL_SPS 0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
-
-#define HW_UARTAPP_INTR 0x50
-#define BM_UARTAPP_INTR_CTSMIS 0x00000002
-#define BM_UARTAPP_INTR_RTIS 0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
-#define BM_UARTAPP_INTR_RXIEN 0x00100000
-#define BM_UARTAPP_INTR_RTIEN 0x00400000
-
-#define HW_UARTAPP_DATA 0x60
-
-#define HW_UARTAPP_STAT 0x70
-#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT 0
-#define BM_UARTAPP_STAT_FERR 0x00010000
-#define BM_UARTAPP_STAT_PERR 0x00020000
-#define BM_UARTAPP_STAT_BERR 0x00040000
-#define BM_UARTAPP_STAT_OERR 0x00080000
-#define BM_UARTAPP_STAT_RXFE 0x01000000
-#define BM_UARTAPP_STAT_TXFF 0x02000000
-#define BM_UARTAPP_STAT_TXFE 0x08000000
-#define BM_UARTAPP_STAT_CTS 0x10000000
-
-#define HW_UARTAPP_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
deleted file mode 100644
index b810deb552a..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS 0x80070000
-#define REGS_UARTDBG_SIZE 0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE 16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED 12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v) \
- (((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA 0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v) \
- (((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC 4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v) \
- (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE 16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED 9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v) \
- (((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE 8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR 0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v) \
- (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE 16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT 0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
- (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE 8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED 6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
- (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE 16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED 8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v) \
- (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN 5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v) \
- (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE 16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED 3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE 16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED 6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL 3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v) \
- (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
-#define BP_UARTDBGIFLS_TXIFLSEL 0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v) \
- (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE 16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED 11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE 16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED 11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE 16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED 11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE 16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED 11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE 16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED 3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
deleted file mode 100644
index 25112c1aa60..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * stmp378x: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS 0x80080000
-#define REGS_USBCTRL_SIZE 0x2000
-
-#define HW_USBCTRL_USBCMD 0x140
-#define BM_USBCTRL_USBCMD_RS 0x00000001
-#define BP_USBCTRL_USBCMD_RS 0
-#define BM_USBCTRL_USBCMD_RST 0x00000002
-
-#define HW_USBCTRL_USBINTR 0x148
-#define BM_USBCTRL_USBINTR_UE 0x00000001
-#define BP_USBCTRL_USBINTR_UE 0
-
-#define HW_USBCTRL_PORTSC1 0x184
-#define BM_USBCTRL_PORTSC1_PHCD 0x00800000
-
-#define HW_USBCTRL_OTGSC 0x1A4
-#define BM_USBCTRL_OTGSC_ID 0x00000100
-#define BM_USBCTRL_OTGSC_IDIS 0x00010000
-#define BM_USBCTRL_OTGSC_IDIE 0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
deleted file mode 100644
index 11f3b732dc9..00000000000
--- a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * stmp378x: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
-#define REGS_USBPHY_PHYS 0x8007C000
-#define REGS_USBPHY_SIZE 0x2000
-
-#define HW_USBPHY_PWD 0x0
-
-#define HW_USBPHY_CTRL 0x30
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
-#define BM_USBPHY_CTRL_CLKGATE 0x40000000
-#define BM_USBPHY_CTRL_SFTRST 0x80000000
-
-#define HW_USBPHY_STATUS 0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
deleted file mode 100644
index c2f9fe04c11..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Freescale STMP378X platform support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/dma.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/system.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-pxp.h>
-#include <mach/regs-i2c.h>
-
-#include "stmp378x.h"
-/*
- * IRQ handling
- */
-static void stmp378x_ack_irq(struct irq_data *d)
-{
- /* Tell ICOLL to release IRQ line */
- __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
- /* ACK current interrupt */
- __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
- REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp378x_mask_irq(struct irq_data *d)
-{
- /* IRQ disable */
- stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static void stmp378x_unmask_irq(struct irq_data *d)
-{
- /* IRQ enable */
- stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static struct irq_chip stmp378x_chip = {
- .irq_ack = stmp378x_ack_irq,
- .irq_mask = stmp378x_mask_irq,
- .irq_unmask = stmp378x_unmask_irq,
-};
-
-void __init stmp378x_init_irq(void)
-{
- stmp3xxx_init_irq(&stmp378x_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
- int r = 0;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
-
- case STMP3XXX_BUS_APBX:
- r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- void __iomem *c0;
- u32 mask;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
- mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
- break;
- case STMP3XXX_BUS_APBX:
- c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
- mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
- break;
- default:
- return;
- }
-
- /* Reset channel and wait for it to complete */
- stmp3xxx_setl(mask, c0);
- while (__raw_readl(c0) & mask)
- cpu_relax();
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical Physical
- * f0000000 80000000 On-chip registers
- * f1000000 00000000 32k on-chip SRAM
- */
-
-static struct map_desc stmp378x_io_desc[] __initdata = {
- {
- .virtual = (u32)STMP3XXX_REGS_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
- .length = STMP3XXX_REGS_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = (u32)STMP3XXX_OCRAM_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
- .length = STMP3XXX_OCRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-/*
- * devices that are present only on stmp378x, not on all 3xxx boards:
- * PxP
- * I2C
- */
-static struct resource pxp_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_PXP_PHYS,
- .end = REGS_PXP_PHYS + REGS_PXP_SIZE,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_PXP,
- .end = IRQ_PXP,
- },
-};
-
-struct platform_device stmp378x_pxp = {
- .name = "stmp3xxx-pxp",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(pxp_resource),
- .resource = pxp_resource,
-};
-
-static struct resource i2c_resources[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_I2C_ERROR,
- .end = IRQ_I2C_ERROR,
- }, {
- .flags = IORESOURCE_MEM,
- .start = REGS_I2C_PHYS,
- .end = REGS_I2C_PHYS + REGS_I2C_SIZE,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- },
-};
-
-struct platform_device stmp378x_i2c = {
- .name = "i2c_stmp3xxx",
- .id = 0,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = i2c_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
-};
-
-void __init stmp378x_map_io(void)
-{
- iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
-}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
deleted file mode 100644
index 0dc15b3c891..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP378X_H
-#define __MACH_STMP378X_H
-
-void stmp378x_map_io(void);
-void stmp378x_init_irq(void);
-
-extern struct platform_device stmp378x_pxp, stmp378x_i2c;
-#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
deleted file mode 100644
index 06158848afd..00000000000
--- a/arch/arm/mach-stmp378x/stmp378x_devb.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Freescale STMP378X development board support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/mmc.h>
-#include <mach/gpmi.h>
-
-#include "stmp378x.h"
-
-static struct platform_device *devices[] = {
- &stmp3xxx_dbguart,
- &stmp3xxx_appuart,
- &stmp3xxx_watchdog,
- &stmp3xxx_touchscreen,
- &stmp3xxx_rtc,
- &stmp3xxx_keyboard,
- &stmp3xxx_framebuffer,
- &stmp3xxx_backlight,
- &stmp3xxx_rotdec,
- &stmp3xxx_persistent,
- &stmp3xxx_dcp_bootstream,
- &stmp3xxx_dcp,
- &stmp3xxx_battery,
- &stmp378x_pxp,
- &stmp378x_i2c,
-};
-
-static struct pin_desc i2c_pins_desc[] = {
- { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group i2c_pins = {
- .pins = i2c_pins_desc,
- .nr_pins = ARRAY_SIZE(i2c_pins_desc),
-};
-
-static struct pin_desc dbguart_pins_0[] = {
- { PINID_PWM0, PIN_FUN3, },
- { PINID_PWM1, PIN_FUN3, },
-};
-
-static struct pin_group dbguart_pins[] = {
- [0] = {
- .pins = dbguart_pins_0,
- .nr_pins = ARRAY_SIZE(dbguart_pins_0),
- },
-};
-
-static int dbguart_pins_control(int id, int request)
-{
- int r = 0;
-
- if (request)
- r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
- else
- stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
- return r;
-}
-
-static struct pin_desc appuart_pins_0[] = {
- { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_desc appuart_pins_1[] = {
-#if 0 /* enable these when second appuart will be connected */
- { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-#endif
-};
-
-static struct pin_desc mmc_pins_desc[] = {
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
- { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group mmc_pins = {
- .pins = mmc_pins_desc,
- .nr_pins = ARRAY_SIZE(mmc_pins_desc),
-};
-
-static int stmp3xxxmmc_get_wp(void)
-{
- return gpio_get_value(PINID_PWM4);
-}
-
-static int stmp3xxxmmc_hw_init_ssp1(void)
-{
- int ret;
-
- ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
- if (ret)
- goto out;
-
- /* Configure write protect GPIO pin */
- ret = gpio_request(PINID_PWM4, "mmc wp");
- if (ret)
- goto out_wp;
-
- gpio_direction_input(PINID_PWM4);
-
- /* Configure POWER pin as gpio to drive power to MMC slot */
- ret = gpio_request(PINID_PWM3, "mmc power");
- if (ret)
- goto out_power;
-
- gpio_direction_output(PINID_PWM3, 0);
- mdelay(100);
-
- return 0;
-
-out_power:
- gpio_free(PINID_PWM4);
-out_wp:
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-out:
- return ret;
-}
-
-static void stmp3xxxmmc_hw_release_ssp1(void)
-{
- gpio_free(PINID_PWM3);
- gpio_free(PINID_PWM4);
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-}
-
-static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
-{
- stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
-}
-
-static unsigned long
-stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
-{
- struct clk *ssp, *parent;
- char *p;
- long r;
-
- ssp = clk_get(NULL, "ssp");
-
- /* using SSP1, no timeout, clock rate 1 */
- writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
- BF(0xFFFF, SSP_TIMING_TIMEOUT),
- base + HW_SSP_TIMING);
-
- p = (hz > 1000000) ? "io" : "osc_24M";
- parent = clk_get(NULL, p);
- clk_set_parent(ssp, parent);
- r = clk_set_rate(ssp, 2 * hz / 1000);
- clk_put(parent);
- clk_put(ssp);
-
- return hz;
-}
-
-static struct stmp3xxxmmc_platform_data mmc_data = {
- .hw_init = stmp3xxxmmc_hw_init_ssp1,
- .hw_release = stmp3xxxmmc_hw_release_ssp1,
- .get_wp = stmp3xxxmmc_get_wp,
- .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
- .setclock = stmp3xxxmmc_setclock_ssp1,
-};
-
-
-static struct pin_group appuart_pins[] = {
- [0] = {
- .pins = appuart_pins_0,
- .nr_pins = ARRAY_SIZE(appuart_pins_0),
- },
- [1] = {
- .pins = appuart_pins_1,
- .nr_pins = ARRAY_SIZE(appuart_pins_1),
- },
-};
-
-static struct pin_desc ssp1_pins_desc[] = {
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_desc ssp2_pins_desc[] = {
- { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
- { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_group ssp1_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp1_pins_desc),
-};
-
-static struct pin_group ssp2_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp2_pins_desc),
-};
-
-static struct pin_desc gpmi_pins_desc[] = {
- { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group gpmi_pins = {
- .pins = gpmi_pins_desc,
- .nr_pins = ARRAY_SIZE(gpmi_pins_desc),
-};
-
-static struct mtd_partition gpmi_partitions[] = {
- [0] = {
- .name = "boot",
- .size = 10 * SZ_1M,
- .offset = 0,
- },
- [1] = {
- .name = "data",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct gpmi_platform_data gpmi_data = {
- .pins = &gpmi_pins,
- .nr_parts = ARRAY_SIZE(gpmi_partitions),
- .parts = gpmi_partitions,
- .part_types = { "cmdline", NULL },
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
- {
- .modalias = "enc28j60",
- .max_speed_hz = 6 * 1000 * 1000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = NULL,
- },
-#endif
-};
-
-static void __init stmp378x_devb_init(void)
-{
- stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
- /* init stmp3xxx platform */
- stmp3xxx_init();
-
- stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
- stmp3xxx_appuart.dev.platform_data = appuart_pins;
- stmp3xxx_mmc.dev.platform_data = &mmc_data;
- stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
- stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
- stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
- stmp378x_i2c.dev.platform_data = &i2c_pins;
-
- /* register spi devices */
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- /* add board's devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* add devices selected by command line ssp1= and ssp2= options */
- stmp3xxx_ssp1_device_register();
- stmp3xxx_ssp2_device_register();
-}
-
-MACHINE_START(STMP378X, "STMP378X")
- .boot_params = 0x40000100,
- .map_io = stmp378x_map_io,
- .init_irq = stmp378x_init_irq,
- .timer = &stmp3xxx_timer,
- .init_machine = stmp378x_devb_init,
-MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
deleted file mode 100644
index 57deffd09fb..00000000000
--- a/arch/arm/mach-stmp37xx/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
-obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
deleted file mode 100644
index 1568ad404d5..00000000000
--- a/arch/arm/mach-stmp37xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x40008000
-params_phys-y := 0x40000100
-initrd_phys-y := 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
deleted file mode 100644
index fed2787b6c3..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale STMP37XX
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #0xf0000000 @ vm address of IRQ controller
- ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT
- cmp \irqnr, #0x3f
- movne \irqstat, #0 @ Ack this IRQ
- strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
- moveqs \irqnr, #0 @ Zero flag set for no IRQ
-
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
deleted file mode 100644
index 98f12938550..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/irqs.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Freescale STMP37XX interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef _ASM_ARCH_IRQS_H
-#define _ASM_ARCH_IRQS_H
-
-#define IRQ_DEBUG_UART 0
-#define IRQ_COMMS_RX 1
-#define IRQ_COMMS_TX 1
-#define IRQ_SSP2_ERROR 2
-#define IRQ_VDD5V 3
-#define IRQ_HEADPHONE_SHORT 4
-#define IRQ_DAC_DMA 5
-#define IRQ_DAC_ERROR 6
-#define IRQ_ADC_DMA 7
-#define IRQ_ADC_ERROR 8
-#define IRQ_SPDIF_DMA 9
-#define IRQ_SAIF2_DMA 9
-#define IRQ_SPDIF_ERROR 10
-#define IRQ_SAIF1_IRQ 10
-#define IRQ_SAIF2_IRQ 10
-#define IRQ_USB_CTRL 11
-#define IRQ_USB_WAKEUP 12
-#define IRQ_GPMI_DMA 13
-#define IRQ_SSP1_DMA 14
-#define IRQ_SSP_ERROR 15
-#define IRQ_GPIO0 16
-#define IRQ_GPIO1 17
-#define IRQ_GPIO2 18
-#define IRQ_SAIF1_DMA 19
-#define IRQ_SSP2_DMA 20
-#define IRQ_ECC8_IRQ 21
-#define IRQ_RTC_ALARM 22
-#define IRQ_UARTAPP_TX_DMA 23
-#define IRQ_UARTAPP_INTERNAL 24
-#define IRQ_UARTAPP_RX_DMA 25
-#define IRQ_I2C_DMA 26
-#define IRQ_I2C_ERROR 27
-#define IRQ_TIMER0 28
-#define IRQ_TIMER1 29
-#define IRQ_TIMER2 30
-#define IRQ_TIMER3 31
-#define IRQ_BATT_BRNOUT 32
-#define IRQ_VDDD_BRNOUT 33
-#define IRQ_VDDIO_BRNOUT 34
-#define IRQ_VDD18_BRNOUT 35
-#define IRQ_TOUCH_DETECT 36
-#define IRQ_LRADC_CH0 37
-#define IRQ_LRADC_CH1 38
-#define IRQ_LRADC_CH2 39
-#define IRQ_LRADC_CH3 40
-#define IRQ_LRADC_CH4 41
-#define IRQ_LRADC_CH5 42
-#define IRQ_LRADC_CH6 43
-#define IRQ_LRADC_CH7 44
-#define IRQ_LCDIF_DMA 45
-#define IRQ_LCDIF_ERROR 46
-#define IRQ_DIGCTL_DEBUG_TRAP 47
-#define IRQ_RTC_1MSEC 48
-#define IRQ_DRI_DMA 49
-#define IRQ_DRI_ATTENTION 50
-#define IRQ_GPMI_ATTENTION 51
-#define IRQ_IR 52
-#define IRQ_DCP_VMI 53
-#define IRQ_DCP 54
-#define IRQ_RESERVED_55 55
-#define IRQ_RESERVED_56 56
-#define IRQ_RESERVED_57 57
-#define IRQ_RESERVED_58 58
-#define IRQ_RESERVED_59 59
-#define SW_IRQ_60 60
-#define SW_IRQ_61 61
-#define SW_IRQ_62 62
-#define SW_IRQ_63 63
-
-#define NR_REAL_IRQS 64
-#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
-
-/* TIMER and BRNOUT are FIQ capable */
-#define FIQ_START IRQ_TIMER0
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
-
-#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
deleted file mode 100644
index d56de0c471d..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/pins.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Freescale STMP37XX SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
- * interface this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17)
-#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
-#define PINID_UART2_CTS STMP3XXX_PINID(0, 26)
-#define PINID_UART2_RTS STMP3XXX_PINID(0, 27)
-#define PINID_UART2_RX STMP3XXX_PINID(0, 28)
-#define PINID_UART2_TX STMP3XXX_PINID(0, 29)
-
-/* Bank 1 */
-#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
-#define PINID_LCD_RESET STMP3XXX_PINID(1, 16)
-#define PINID_LCD_RS STMP3XXX_PINID(1, 17)
-#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19)
-#define PINID_LCD_CS STMP3XXX_PINID(1, 20)
-#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21)
-#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22)
-#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23)
-#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24)
-#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25)
-#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26)
-#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27)
-#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28)
-
-/* Bank 2 */
-#define PINID_PWM0 STMP3XXX_PINID(2, 0)
-#define PINID_PWM1 STMP3XXX_PINID(2, 1)
-#define PINID_PWM2 STMP3XXX_PINID(2, 2)
-#define PINID_PWM3 STMP3XXX_PINID(2, 3)
-#define PINID_PWM4 STMP3XXX_PINID(2, 4)
-#define PINID_I2C_SCL STMP3XXX_PINID(2, 5)
-#define PINID_I2C_SDA STMP3XXX_PINID(2, 6)
-#define PINID_ROTTARYA STMP3XXX_PINID(2, 7)
-#define PINID_ROTTARYB STMP3XXX_PINID(2, 8)
-#define PINID_EMI_CKE STMP3XXX_PINID(2, 9)
-#define PINID_EMI_RASN STMP3XXX_PINID(2, 10)
-#define PINID_EMI_CASN STMP3XXX_PINID(2, 11)
-#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12)
-#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13)
-#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14)
-#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A00 STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A01 STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A02 STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A03 STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A04 STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A05 STMP3XXX_PINID(2, 21)
-#define PINID_EMI_A06 STMP3XXX_PINID(2, 22)
-#define PINID_EMI_A07 STMP3XXX_PINID(2, 23)
-#define PINID_EMI_A08 STMP3XXX_PINID(2, 24)
-#define PINID_EMI_A09 STMP3XXX_PINID(2, 25)
-#define PINID_EMI_A10 STMP3XXX_PINID(2, 26)
-#define PINID_EMI_A11 STMP3XXX_PINID(2, 27)
-#define PINID_EMI_A12 STMP3XXX_PINID(2, 28)
-#define PINID_EMI_A13 STMP3XXX_PINID(2, 29)
-#define PINID_EMI_A14 STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
deleted file mode 100644
index a323aa9a21f..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * stmp37xx: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
-
-#define HW_APBH_CTRL0 0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL 16
-#define BM_APBH_CTRL0_CLKGATE 0x40000000
-#define BM_APBH_CTRL0_SFTRST 0x80000000
-
-#define HW_APBH_CTRL1 0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
-
-#define HW_APBH_DEVSEL 0x20
-
-#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR 0x50
-
-#define BM_APBH_CHn_CMD_MODE 0x00000003
-#define BP_APBH_CHn_CMD_MODE 0x00000001
-#define BV_APBH_CHn_CMD_MODE_NOOP 0
-#define BV_APBH_CHn_CMD_MODE_WRITE 1
-#define BV_APBH_CHn_CMD_MODE_READ 2
-#define BV_APBH_CHn_CMD_MODE_SENSE 3
-#define BM_APBH_CHn_CMD_CHAIN 0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS 12
-#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA 0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE 16
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
deleted file mode 100644
index 6d080cd5b70..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * stmp37xx: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
-
-#define HW_APBX_CTRL0 0x0
-#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBX_CTRL0_RESET_CHANNEL 16
-#define BM_APBX_CTRL0_CLKGATE 0x40000000
-#define BM_APBX_CTRL0_SFTRST 0x80000000
-
-#define HW_APBX_CTRL1 0x10
-
-#define HW_APBX_DEVSEL 0x20
-
-#define HW_APBX_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR 0x50
-#define BM_APBX_CHn_CMD_MODE 0x00000003
-#define BP_APBX_CHn_CMD_MODE 0x00000001
-#define BV_APBX_CHn_CMD_MODE_NOOP 0
-#define BV_APBX_CHn_CMD_MODE_WRITE 1
-#define BV_APBX_CHn_CMD_MODE_READ 2
-#define BV_APBX_CHn_CMD_MODE_SENSE 3
-#define BM_APBX_CHn_CMD_COMMAND 0x00000003
-#define BP_APBX_CHn_CMD_COMMAND 0
-#define BM_APBX_CHn_CMD_CHAIN 0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS 12
-#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBX_CH0_BAR (0x70 + 0 * 0x70)
-#define HW_APBX_CH1_BAR (0x70 + 1 * 0x70)
-#define HW_APBX_CH2_BAR (0x70 + 2 * 0x70)
-#define HW_APBX_CH3_BAR (0x70 + 3 * 0x70)
-#define HW_APBX_CH4_BAR (0x70 + 4 * 0x70)
-#define HW_APBX_CH5_BAR (0x70 + 5 * 0x70)
-#define HW_APBX_CH6_BAR (0x70 + 6 * 0x70)
-#define HW_APBX_CH7_BAR (0x70 + 7 * 0x70)
-#define HW_APBX_CH8_BAR (0x70 + 8 * 0x70)
-#define HW_APBX_CH9_BAR (0x70 + 9 * 0x70)
-#define HW_APBX_CH10_BAR (0x70 + 10 * 0x70)
-#define HW_APBX_CH11_BAR (0x70 + 11 * 0x70)
-#define HW_APBX_CH12_BAR (0x70 + 12 * 0x70)
-#define HW_APBX_CH13_BAR (0x70 + 13 * 0x70)
-#define HW_APBX_CH14_BAR (0x70 + 14 * 0x70)
-#define HW_APBX_CH15_BAR (0x70 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR 0x70
-
-#define HW_APBX_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA 0x80
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE 16
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
deleted file mode 100644
index 3b511f947a5..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * stmp37xx: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
-
-#define HW_AUDIOIN_CTRL 0x0
-#define BM_AUDIOIN_CTRL_RUN 0x00000001
-#define BP_AUDIOIN_CTRL_RUN 0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOIN_STAT 0x10
-
-#define HW_AUDIOIN_ADCSRR 0x20
-
-#define HW_AUDIOIN_ADCVOLUME 0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
-
-#define HW_AUDIOIN_ADCDEBUG 0x40
-
-#define HW_AUDIOIN_ADCVOL 0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
-#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
-
-#define HW_AUDIOIN_MICLINE 0x60
-
-#define HW_AUDIOIN_ANACLKCTRL 0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOIN_DATA 0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
deleted file mode 100644
index ca1942b8a3e..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * stmp37xx: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
-
-#define HW_AUDIOOUT_CTRL 0x0
-#define BM_AUDIOOUT_CTRL_RUN 0x00000001
-#define BP_AUDIOOUT_CTRL_RUN 0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOOUT_STAT 0x10
-
-#define HW_AUDIOOUT_DACSRR 0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
-#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT 16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
-#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT 28
-
-#define HW_AUDIOOUT_DACVOLUME 0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG 0x40
-
-#define HW_AUDIOOUT_HPVOL 0x50
-#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
-
-#define HW_AUDIOOUT_PWRDN 0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
-#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
-#define BM_AUDIOOUT_PWRDN_LINEOUT 0x01000000
-
-#define HW_AUDIOOUT_REFCTRL 0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
-
-#define HW_AUDIOOUT_ANACTRL 0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
-
-#define HW_AUDIOOUT_TEST 0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
-
-#define HW_AUDIOOUT_BISTCTRL 0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0 0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1 0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL 0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOOUT_DATA 0xF0
-
-#define HW_AUDIOOUT_LINEOUTCTRL 0x100
-#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0x0000001F
-#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0
-#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 0x00001F00
-#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 8
-#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 0x00007000
-#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 12
-#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 0x00F00000
-#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 20
-#define BM_AUDIOOUT_LINEOUTCTRL_MUTE 0x01000000
-#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_VERSION 0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
deleted file mode 100644
index 47f5c92fdaf..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * stmp37xx: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
-
-#define HW_CLKCTRL_PLLCTRL0 0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-
-#define HW_CLKCTRL_CPU 0x20
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-
-#define HW_CLKCTRL_HBUS 0x30
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BP_CLKCTRL_HBUS_DIV 0
-
-#define HW_CLKCTRL_XBUS 0x40
-
-#define HW_CLKCTRL_XTAL 0x50
-
-#define HW_CLKCTRL_PIX 0x60
-#define BM_CLKCTRL_PIX_DIV 0x00007FFF
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_SSP 0x70
-
-#define HW_CLKCTRL_GPMI 0x80
-
-#define HW_CLKCTRL_SPDIF 0x90
-
-#define HW_CLKCTRL_EMI 0xA0
-
-#define HW_CLKCTRL_IR 0xB0
-
-#define HW_CLKCTRL_SAIF 0xC0
-
-#define HW_CLKCTRL_FRAC 0xD0
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-
-#define HW_CLKCTRL_CLKSEQ 0xE0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-
-#define HW_CLKCTRL_RESET 0xF0
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-#define BP_CLKCTRL_RESET_DIG 0
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
deleted file mode 100644
index ba1bbe265c2..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * stmp37xx: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
-
-#define HW_DIGCTL_CTRL 0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
deleted file mode 100644
index 3b6d990a3af..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * stmp37xx: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
-
-#define HW_ECC8_CTRL 0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ 0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
-
-#define HW_ECC8_STATUS0 0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_ECC8_STATUS0_CORRECTED 0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX 8
-#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE 16
-
-#define HW_ECC8_STATUS1 0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
deleted file mode 100644
index f2b304f5449..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * stmp37xx: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS 0x8000C000
-#define REGS_GPMI_SIZE 0x2000
-
-#define HW_GPMI_CTRL0 0x0
-#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT 0
-#define BM_GPMI_CTRL0_CS 0x00300000
-#define BP_GPMI_CTRL0_CS 20
-#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
-#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE 24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
-#define BM_GPMI_CTRL0_RUN 0x20000000
-#define BM_GPMI_CTRL0_CLKGATE 0x40000000
-#define BM_GPMI_CTRL0_SFTRST 0x80000000
-#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD 13
-
-#define HW_GPMI_CTRL1 0x60
-#define BM_GPMI_CTRL1_GPMI_MODE 0x00000003
-#define BP_GPMI_CTRL1_GPMI_MODE 0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
-#define BM_GPMI_CTRL1_DSAMPLE_TIME 0x00007000
-#define BP_GPMI_CTRL1_DSAMPLE_TIME 12
-
-#define HW_GPMI_TIMING0 0x70
-#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP 0
-#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD 8
-
-#define HW_GPMI_TIMING1 0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
deleted file mode 100644
index 35882a9b8bc..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * stmp37xx: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS 0x80058000
-#define REGS_I2C_SIZE 0x2000
-
-#define HW_I2C_CTRL0 0x0
-#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT 0
-#define BM_I2C_CTRL0_DIRECTION 0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
-#define BM_I2C_CTRL0_CLKGATE 0x40000000
-#define BM_I2C_CTRL0_SFTRST 0x80000000
-
-#define HW_I2C_TIMING0 0x10
-
-#define HW_I2C_TIMING1 0x20
-
-#define HW_I2C_TIMING2 0x30
-
-#define HW_I2C_CTRL1 0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ 0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
-
-#define HW_I2C_VERSION 0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
deleted file mode 100644
index 3b7c92239e2..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * stmp37xx: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
-
-#define HW_ICOLL_VECTOR 0x0
-
-#define HW_ICOLL_LEVELACK 0x10
-
-#define HW_ICOLL_CTRL 0x20
-#define BM_ICOLL_CTRL_CLKGATE 0x40000000
-#define BM_ICOLL_CTRL_SFTRST 0x80000000
-
-#define HW_ICOLL_STAT 0x30
-
-#define HW_ICOLL_PRIORITY0 (0x60 + 0 * 0x10)
-#define HW_ICOLL_PRIORITY1 (0x60 + 1 * 0x10)
-#define HW_ICOLL_PRIORITY2 (0x60 + 2 * 0x10)
-#define HW_ICOLL_PRIORITY3 (0x60 + 3 * 0x10)
-
-#define HW_ICOLL_PRIORITYn 0x60
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
deleted file mode 100644
index 72514e8b073..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * stmp37xx: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS 0x80030000
-#define REGS_LCDIF_SIZE 0x2000
-
-#define HW_LCDIF_CTRL 0x0
-#define BM_LCDIF_CTRL_COUNT 0x0000FFFF
-#define BP_LCDIF_CTRL_COUNT 0
-#define BM_LCDIF_CTRL_RUN 0x00010000
-#define BM_LCDIF_CTRL_WORD_LENGTH 0x00020000
-#define BM_LCDIF_CTRL_DATA_SELECT 0x00040000
-#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00080000
-#define BM_LCDIF_CTRL_VSYNC_MODE 0x00100000
-#define BM_LCDIF_CTRL_DATA_SWIZZLE 0x00600000
-#define BP_LCDIF_CTRL_DATA_SWIZZLE 21
-#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00800000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x06000000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 25
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x08000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x10000000
-#define BM_LCDIF_CTRL_CLKGATE 0x40000000
-#define BM_LCDIF_CTRL_SFTRST 0x80000000
-
-#define HW_LCDIF_CTRL1 0x10
-#define BM_LCDIF_CTRL1_RESET 0x00000001
-#define BP_LCDIF_CTRL1_RESET 0
-#define BM_LCDIF_CTRL1_MODE86 0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
-
-#define HW_LCDIF_TIMING 0x20
-
-#define HW_LCDIF_VDCTRL0 0x30
-#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT 0x000003FF
-#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
-
-#define HW_LCDIF_VDCTRL1 0x40
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0x000FFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
-#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 0xFFF00000
-#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 20
-
-#define HW_LCDIF_VDCTRL2 0x50
-#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT 0x000007FF
-#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x007FF800
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 11
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF800000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 23
-
-#define HW_LCDIF_VDCTRL3 0x60
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x000001FF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x00FFF000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 12
-#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON 0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
deleted file mode 100644
index cc7b4702d1c..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * stmp37xx: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
-
-#define HW_LRADC_CTRL0 0x0
-#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE 0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
-#define BM_LRADC_CTRL0_CLKGATE 0x40000000
-#define BM_LRADC_CTRL0_SFTRST 0x80000000
-
-#define HW_LRADC_CTRL1 0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ 0
-#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
-
-#define HW_LRADC_CTRL2 0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
-
-#define HW_LRADC_CTRL3 0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME 8
-
-#define HW_LRADC_STATUS 0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
-
-#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
-#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
-#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
-#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
-#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
-#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
-#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
-#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn 0x50
-#define BM_LRADC_CHn_VALUE 0x0003FFFF
-#define BP_LRADC_CHn_VALUE 0
-#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES 24
-#define BM_LRADC_CHn_ACCUMULATE 0x20000000
-
-#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn 0xD0
-#define BM_LRADC_DELAYn_DELAY 0x000007FF
-#define BP_LRADC_DELAYn_DELAY 0
-#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT 11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
-#define BM_LRADC_DELAYn_KICK 0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
-
-#define HW_LRADC_CTRL4 0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT 24
-#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT 28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
deleted file mode 100644
index d5efce2388c..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * stmp37xx: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
-
-#define HW_PINCTRL_MUXSEL0 0x100
-#define HW_PINCTRL_MUXSEL1 0x110
-#define HW_PINCTRL_MUXSEL2 0x120
-#define HW_PINCTRL_MUXSEL3 0x130
-#define HW_PINCTRL_MUXSEL4 0x140
-#define HW_PINCTRL_MUXSEL5 0x150
-#define HW_PINCTRL_MUXSEL6 0x160
-#define HW_PINCTRL_MUXSEL7 0x170
-
-#define HW_PINCTRL_DRIVE0 0x200
-#define HW_PINCTRL_DRIVE1 0x210
-#define HW_PINCTRL_DRIVE2 0x220
-#define HW_PINCTRL_DRIVE3 0x230
-#define HW_PINCTRL_DRIVE4 0x240
-#define HW_PINCTRL_DRIVE5 0x250
-#define HW_PINCTRL_DRIVE6 0x260
-#define HW_PINCTRL_DRIVE7 0x270
-#define HW_PINCTRL_DRIVE8 0x280
-#define HW_PINCTRL_DRIVE9 0x290
-#define HW_PINCTRL_DRIVE10 0x2A0
-#define HW_PINCTRL_DRIVE11 0x2B0
-#define HW_PINCTRL_DRIVE12 0x2C0
-#define HW_PINCTRL_DRIVE13 0x2D0
-#define HW_PINCTRL_DRIVE14 0x2E0
-
-#define HW_PINCTRL_PULL0 0x300
-#define HW_PINCTRL_PULL1 0x310
-#define HW_PINCTRL_PULL2 0x320
-#define HW_PINCTRL_PULL3 0x330
-
-#define HW_PINCTRL_DOUT0 0x400
-#define HW_PINCTRL_DOUT1 0x410
-#define HW_PINCTRL_DOUT2 0x420
-
-#define HW_PINCTRL_DIN0 0x500
-#define HW_PINCTRL_DIN1 0x510
-#define HW_PINCTRL_DIN2 0x520
-
-#define HW_PINCTRL_DOE0 0x600
-#define HW_PINCTRL_DOE1 0x610
-#define HW_PINCTRL_DOE2 0x620
-
-#define HW_PINCTRL_PIN2IRQ0 0x700
-#define HW_PINCTRL_PIN2IRQ1 0x710
-#define HW_PINCTRL_PIN2IRQ2 0x720
-
-#define HW_PINCTRL_IRQEN0 0x800
-#define HW_PINCTRL_IRQEN1 0x810
-#define HW_PINCTRL_IRQEN2 0x820
-
-#define HW_PINCTRL_IRQLEVEL0 0x900
-#define HW_PINCTRL_IRQLEVEL1 0x910
-#define HW_PINCTRL_IRQLEVEL2 0x920
-
-#define HW_PINCTRL_IRQPOL0 0xA00
-#define HW_PINCTRL_IRQPOL1 0xA10
-#define HW_PINCTRL_IRQPOL2 0xA20
-
-#define HW_PINCTRL_IRQSTAT0 0xB00
-#define HW_PINCTRL_IRQSTAT1 0xB10
-#define HW_PINCTRL_IRQSTAT2 0xB20
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
deleted file mode 100644
index 0e733d74a22..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * stmp37xx: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
-
-#define HW_POWER_CTRL 0x0
-#define BM_POWER_CTRL_CLKGATE 0x40000000
-
-#define HW_POWER_5VCTRL 0x10
-
-#define HW_POWER_MINPWR 0x20
-
-#define HW_POWER_CHARGE 0x30
-
-#define HW_POWER_VDDDCTRL 0x40
-
-#define HW_POWER_VDDACTRL 0x50
-
-#define HW_POWER_VDDIOCTRL 0x60
-#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG 0
-
-#define HW_POWER_STS 0xB0
-#define BM_POWER_STS_VBUSVALID 0x00000002
-#define BM_POWER_STS_BVALID 0x00000004
-#define BM_POWER_STS_AVALID 0x00000008
-#define BM_POWER_STS_DC_OK 0x00000100
-
-#define HW_POWER_RESET 0xE0
-
-#define HW_POWER_DEBUG 0xF0
-#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
-
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
deleted file mode 100644
index 15966a1b62e..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * stmp37xx: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
-
-#define HW_PWM_CTRL 0x0
-#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
-
-#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn 0x10
-#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE 0
-#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE 16
-
-#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn 0x20
-#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD 0
-#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE 16
-#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE 18
-#define BM_PWM_PERIODn_CDIV 0x00700000
-#define BP_PWM_PERIODn_CDIV 20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
deleted file mode 100644
index fac40edc38a..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * stmp37xx: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS 0x8005C000
-#define REGS_RTC_SIZE 0x2000
-
-#define HW_RTC_CTRL 0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN 0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
-
-#define HW_RTC_STAT 0x10
-#define BM_RTC_STAT_NEW_REGS 0x0000FF00
-#define BP_RTC_STAT_NEW_REGS 8
-#define BM_RTC_STAT_STALE_REGS 0x00FF0000
-#define BP_RTC_STAT_STALE_REGS 16
-#define BM_RTC_STAT_RTC_PRESENT 0x80000000
-
-#define HW_RTC_SECONDS 0x30
-
-#define HW_RTC_ALARM 0x40
-
-#define HW_RTC_WATCHDOG 0x50
-
-#define HW_RTC_PERSISTENT0 0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
-
-#define HW_RTC_PERSISTENT1 0x70
-
-#define HW_RTC_VERSION 0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
deleted file mode 100644
index cbde891a06c..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * stmp37xx: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SSP_BASE (STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS 0x80010000
-#define REGS_SSP2_PHYS 0x80034000
-#define REGS_SSP_SIZE 0x2000
-
-#define HW_SSP_CTRL0 0x0
-#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT 0
-#define BM_SSP_CTRL0_ENABLE 0x00010000
-#define BM_SSP_CTRL0_GET_RESP 0x00020000
-#define BM_SSP_CTRL0_LONG_RESP 0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH 22
-#define BM_SSP_CTRL0_DATA_XFER 0x01000000
-#define BM_SSP_CTRL0_READ 0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
-#define BM_SSP_CTRL0_LOCK_CS 0x08000000
-#define BM_SSP_CTRL0_RUN 0x20000000
-#define BM_SSP_CTRL0_CLKGATE 0x40000000
-#define BM_SSP_CTRL0_SFTRST 0x80000000
-
-#define HW_SSP_CMD0 0x10
-#define BM_SSP_CMD0_CMD 0x000000FF
-#define BP_SSP_CMD0_CMD 0
-#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT 8
-#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE 16
-#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
-#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG 0
-
-#define HW_SSP_TIMING 0x50
-#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE 0
-#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE 8
-#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT 16
-
-#define HW_SSP_CTRL1 0x60
-#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE 0
-#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH 4
-#define BM_SSP_CTRL1_POLARITY 0x00000200
-#define BM_SSP_CTRL1_PHASE 0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
-
-#define HW_SSP_DATA 0x70
-
-#define HW_SSP_SDRESP0 0x80
-
-#define HW_SSP_SDRESP1 0x90
-
-#define HW_SSP_SDRESP2 0xA0
-
-#define HW_SSP_SDRESP3 0xB0
-
-#define HW_SSP_STATUS 0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
-#define BM_SSP_STATUS_TIMEOUT 0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
-#define BM_SSP_STATUS_RESP_ERR 0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
-#define BM_SSP_STATUS_CARD_DETECT 0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
deleted file mode 100644
index 4af0f6edfa7..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * stmp37xx: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
-
-#define HW_TIMROT_ROTCTRL 0x0
-#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
-
-#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn 0x20
-#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE 4
-#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
-
-#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn 0x30
-#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
deleted file mode 100644
index 0594275d860..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * stmp37xx: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTAPP_BASE (STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS 0x8006C000
-#define REGS_UARTAPP_SIZE 0x2000
-
-#define HW_UARTAPP_CTRL0 0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT 0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
-#define BM_UARTAPP_CTRL0_RUN 0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT 0
-#define BM_UARTAPP_CTRL1_RUN 0x10000000
-
-#define HW_UARTAPP_CTRL2 0x20
-#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN 0
-#define BM_UARTAPP_CTRL2_TXE 0x00000100
-#define BM_UARTAPP_CTRL2_RXE 0x00000200
-#define BM_UARTAPP_CTRL2_RTS 0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
-
-#define HW_UARTAPP_LINECTRL 0x30
-#define BM_UARTAPP_LINECTRL_BRK 0x00000001
-#define BP_UARTAPP_LINECTRL_BRK 0
-#define BM_UARTAPP_LINECTRL_PEN 0x00000002
-#define BM_UARTAPP_LINECTRL_EPS 0x00000004
-#define BM_UARTAPP_LINECTRL_STP2 0x00000008
-#define BM_UARTAPP_LINECTRL_FEN 0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN 5
-#define BM_UARTAPP_LINECTRL_SPS 0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
-
-#define HW_UARTAPP_INTR 0x50
-#define BM_UARTAPP_INTR_CTSMIS 0x00000002
-#define BM_UARTAPP_INTR_RTIS 0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
-#define BM_UARTAPP_INTR_RXIEN 0x00100000
-#define BM_UARTAPP_INTR_RTIEN 0x00400000
-
-#define HW_UARTAPP_DATA 0x60
-
-#define HW_UARTAPP_STAT 0x70
-#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT 0
-#define BM_UARTAPP_STAT_FERR 0x00010000
-#define BM_UARTAPP_STAT_PERR 0x00020000
-#define BM_UARTAPP_STAT_BERR 0x00040000
-#define BM_UARTAPP_STAT_OERR 0x00080000
-#define BM_UARTAPP_STAT_RXFE 0x01000000
-#define BM_UARTAPP_STAT_TXFF 0x02000000
-#define BM_UARTAPP_STAT_TXFE 0x08000000
-#define BM_UARTAPP_STAT_CTS 0x10000000
-
-#define HW_UARTAPP_VERSION 0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
deleted file mode 100644
index b810deb552a..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS 0x80070000
-#define REGS_UARTDBG_SIZE 0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE 16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED 12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v) \
- (((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA 0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v) \
- (((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC 4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v) \
- (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE 16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED 9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v) \
- (((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE 8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR 0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v) \
- (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE 16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT 0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
- (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE 8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED 6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
- (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE 16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED 8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v) \
- (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN 5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v) \
- (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE 16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED 3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE 16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED 6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL 3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v) \
- (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
-#define BP_UARTDBGIFLS_TXIFLSEL 0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v) \
- (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE 16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED 11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE 16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED 11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE 16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED 11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE 16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED 11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE 16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED 3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
deleted file mode 100644
index 9145e22df32..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * stmp37xx: USBCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTL_PHYS 0x80000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
deleted file mode 100644
index 1a2ae9cbdfe..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * stmp37xx: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS 0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
deleted file mode 100644
index b7fce0fbc56..00000000000
--- a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * stmp37xx: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
-
-#define HW_USBPHY_PWD 0x0
-
-#define HW_USBPHY_CTRL 0x30
-#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT 0x00000001
-#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT 0
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
-#define BM_USBPHY_CTRL_CLKGATE 0x40000000
-#define BM_USBPHY_CTRL_SFTRST 0x80000000
-
-#define HW_USBPHY_STATUS 0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
deleted file mode 100644
index a9aed06ff37..00000000000
--- a/arch/arm/mach-stmp37xx/stmp37xx.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * Freescale STMP37XX platform support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/dma.h>
-
-#include <mach/platform.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include "stmp37xx.h"
-
-/*
- * IRQ handling
- */
-static void stmp37xx_ack_irq(struct irq_data *d)
-{
- /* Disable IRQ */
- stmp3xxx_clearl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-
- /* ACK current interrupt */
- __raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp37xx_mask_irq(struct irq_data *d)
-{
- /* IRQ disable */
- stmp3xxx_clearl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-}
-
-static void stmp37xx_unmask_irq(struct irq_data *d)
-{
- /* IRQ enable */
- stmp3xxx_setl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-}
-
-static struct irq_chip stmp37xx_chip = {
- .irq_ack = stmp37xx_ack_irq,
- .irq_mask = stmp37xx_mask_irq,
- .irq_unmask = stmp37xx_unmask_irq,
-};
-
-void __init stmp37xx_init_irq(void)
-{
- stmp3xxx_init_irq(&stmp37xx_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
- REGS_APBH_BASE + HW_APBH_CTRL1);
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
- REGS_APBX_BASE + HW_APBX_CTRL1);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
- REGS_APBH_BASE + HW_APBH_CTRL1);
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
- REGS_APBX_BASE + HW_APBX_CTRL1);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
- int r = 0;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
-
- case STMP3XXX_BUS_APBX:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- /* Reset channel and wait for it to complete */
- stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
- (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
- cpu_relax();
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
- REGS_APBX_BASE + HW_APBX_CTRL0);
- while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
- (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
- cpu_relax();
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical Physical
- * f0000000 80000000 On-chip registers
- * f1000000 00000000 32k on-chip SRAM
- */
-static struct map_desc stmp37xx_io_desc[] __initdata = {
- {
- .virtual = (u32)STMP3XXX_REGS_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
- {
- .virtual = (u32)STMP3XXX_OCRAM_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
- .length = STMP3XXX_OCRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init stmp37xx_map_io(void)
-{
- iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
-}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
deleted file mode 100644
index 0b75fb796a6..00000000000
--- a/arch/arm/mach-stmp37xx/stmp37xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP37XX_H
-#define __MACH_STMP37XX_H
-
-void stmp37xx_map_io(void);
-void stmp37xx_init_irq(void);
-
-#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
deleted file mode 100644
index 311d8552d36..00000000000
--- a/arch/arm/mach-stmp37xx/stmp37xx_devb.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Freescale STMP37XX development board support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include "stmp37xx.h"
-
-/*
- * List of STMP37xx development board specific devices
- */
-static struct platform_device *stmp37xx_devb_devices[] = {
- &stmp3xxx_dbguart,
- &stmp3xxx_appuart,
-};
-
-static struct pin_desc dbguart_pins_0[] = {
- { PINID_PWM0, PIN_FUN3, },
- { PINID_PWM1, PIN_FUN3, },
-};
-
-struct pin_desc appuart_pins_0[] = {
- { PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_group appuart_pins[] = {
- [0] = {
- .pins = appuart_pins_0,
- .nr_pins = ARRAY_SIZE(appuart_pins_0),
- },
- /* 37xx has the only app uart */
-};
-
-static struct pin_group dbguart_pins[] = {
- [0] = {
- .pins = dbguart_pins_0,
- .nr_pins = ARRAY_SIZE(dbguart_pins_0),
- },
-};
-
-static int dbguart_pins_control(int id, int request)
-{
- int r = 0;
-
- if (request)
- r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
- else
- stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
- return r;
-}
-
-
-static void __init stmp37xx_devb_init(void)
-{
- stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
- /* Init STMP3xxx platform */
- stmp3xxx_init();
-
- stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
- stmp3xxx_appuart.dev.platform_data = appuart_pins;
-
- /* Add STMP37xx development board devices */
- platform_add_devices(stmp37xx_devb_devices,
- ARRAY_SIZE(stmp37xx_devb_devices));
-}
-
-MACHINE_START(STMP37XX, "STMP37XX")
- .boot_params = 0x40000100,
- .map_io = stmp37xx_map_io,
- .init_irq = stmp37xx_init_irq,
- .timer = &stmp3xxx_timer,
- .init_machine = stmp37xx_devb_init,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
index e0a8d609afe..a96babe8377 100644
--- a/arch/arm/mach-tcc8k/time.c
+++ b/arch/arm/mach-tcc8k/time.c
@@ -25,19 +25,6 @@
static void __iomem *timer_base;
-static cycle_t tcc_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + TC32MCNT_OFFS);
-}
-
-static struct clocksource clocksource_tcc = {
- .name = "tcc_tc32",
- .rating = 200,
- .read = tcc_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int tcc_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
@@ -102,7 +89,8 @@ static int __init tcc_clockevent_init(struct clk *clock)
{
unsigned int c = clk_get_rate(clock);
- clocksource_register_hz(&clocksource_tcc, c);
+ clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
+ 200, 32, clocksource_mmio_readl_up);
clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_tcc.shift);
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index e945ae28ee7..f4ef5eb317b 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
* - Change the source selector to invalid to stop the DMA from
* FIFO to memory.
* - Read the status register to know the number of pending
- * bytes to be transfered.
+ * bytes to be transferred.
* - Finally stop or program the DMA to the next buffer in the
* list.
*/
@@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
if (status & STA_BUSY)
req->bytes_transferred -= to_transfer;
- /* In continous transfer mode, DMA only tracks the count of the
+ /* In continuous transfer mode, DMA only tracks the count of the
* half DMA buffer. So, if the DMA already finished half the DMA
* then add the half buffer to the completed count.
*
diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c
index 76a3f654220..65a1aba6823 100644
--- a/arch/arm/mach-tegra/gpio.c
+++ b/arch/arm/mach-tegra/gpio.c
@@ -257,7 +257,8 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
void tegra_gpio_resume(void)
{
unsigned long flags;
- int b, p, i;
+ int b;
+ int p;
local_irq_save(flags);
@@ -280,7 +281,8 @@ void tegra_gpio_resume(void)
void tegra_gpio_suspend(void)
{
unsigned long flags;
- int b, p, i;
+ int b;
+ int p;
local_irq_save(flags);
for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
index cc115174899..425b42e91ef 100644
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -23,7 +23,7 @@
#include <asm/outercache.h>
-#define rmb() dmb()
+#define rmb() dsb()
#define wmb() do { dsb(); outer_sync(); } while (0)
#define mb() wmb()
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 39011bd9a92..d0132e8031a 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -92,11 +92,11 @@ struct tegra_dma_req {
/* This is a called from the DMA ISR context when the DMA is still in
* progress and is actively filling same buffer.
*
- * In case of continous mode receive, this threshold is 1/2 the buffer
+ * In case of continuous mode receive, this threshold is 1/2 the buffer
* size. In other cases, this will not even be called as there is no
* hardware support for it.
*
- * In the case of continous mode receive, if there is next req already
+ * In the case of continuous mode receive, if there is next req already
* queued, DMA programs the HW to use that req when this req is
* completed. If there is no "next req" queued, then DMA ISR doesn't do
* anything before calling this callback.
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
deleted file mode 100644
index c8221b38ee7..00000000000
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index ec1f68924ed..b8ae3c978de 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
@@ -122,6 +123,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
cpu_set(i, cpu_possible_map);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 6d7c4eea4dc..4459470c052 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1362,14 +1362,15 @@ static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate)
{
unsigned long flags;
int ret;
+ long new_rate = rate;
- rate = clk_round_rate(c->parent, rate);
- if (rate < 0)
- return rate;
+ new_rate = clk_round_rate(c->parent, new_rate);
+ if (new_rate < 0)
+ return new_rate;
spin_lock_irqsave(&c->parent->spinlock, flags);
- c->u.shared_bus_user.rate = rate;
+ c->u.shared_bus_user.rate = new_rate;
ret = tegra_clk_shared_bus_update(c->parent);
spin_unlock_irqrestore(&c->parent->spinlock, flags);
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 0fcb1eb4214..90350420c4e 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -98,11 +98,6 @@ static void tegra_timer_set_mode(enum clock_event_mode mode,
}
}
-static cycle_t tegra_clocksource_read(struct clocksource *cs)
-{
- return timer_readl(TIMERUS_CNTR_1US);
-}
-
static struct clock_event_device tegra_clockevent = {
.name = "timer0",
.rating = 300,
@@ -111,14 +106,6 @@ static struct clock_event_device tegra_clockevent = {
.set_mode = tegra_timer_set_mode,
};
-static struct clocksource tegra_clocksource = {
- .name = "timer_us",
- .rating = 300,
- .read = tegra_clocksource_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static DEFINE_CLOCK_DATA(cd);
/*
@@ -234,7 +221,8 @@ static void __init tegra_init_timer(void)
init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
1000000, SC_MULT, SC_SHIFT);
- if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
+ if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+ "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
printk(KERN_ERR "Failed to register clocksource\n");
BUG();
}
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index fabcc49abe8..5535dd0a78c 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void)
val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if noone else is using VCXO */
+ /* Deactivate VCXO if no one else is using VCXO */
if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void)
val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if noone else is using VCXO */
+ /* Deactivate VCXO if no one else is using VCXO */
if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+ /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
/* Else default to fixed value */
if (clk->round_rate) {
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 3ec58bd2d6e..891cf44591e 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -333,20 +333,6 @@ static struct irqaction u300_timer_irq = {
.handler = u300_timer_interrupt,
};
-/* Use general purpose timer 2 as clock source */
-static cycle_t u300_get_cycles(struct clocksource *cs)
-{
- return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
-}
-
-static struct clocksource clocksource_u300_1mhz = {
- .name = "GPT2",
- .rating = 300, /* Reasonably fast and accurate clock source */
- .read = u300_get_cycles,
- .mask = CLOCKSOURCE_MASK(32), /* 32 bits */
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
@@ -422,7 +408,9 @@ static void __init u300_timer_init(void)
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
- if (clocksource_register_hz(&clocksource_u300_1mhz, rate))
+ /* Use general purpose timer 2 as clock source */
+ if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
+ "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", clocksource_u300_1mhz.name);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index dc8746d7826..6e1907fa94f 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
* on value present in GpioSel1 to GpioSel6 and AlternatFunction
* register. This is the array of 7 configuration settings.
* One has to compile time decide these settings. Below is the
- * explaination of these setting
+ * explanation of these setting
* GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
* GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
* GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
@@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
.irq = NOMADIK_GPIO_TO_IRQ(217),
.platform_data = &mop500_tc35892_data,
},
-};
-
-/* I2C0 devices only available prior to HREFv60 */
-static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+ /* I2C0 devices only available prior to HREFv60 */
{
I2C_BOARD_INFO("tps61052", 0x33),
.platform_data = &mop500_tps61052_data,
},
};
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
{
/* lp5521 LED driver, 1st device */
@@ -425,6 +424,8 @@ static void __init mop500_uart_init(void)
static void __init mop500_init_machine(void)
{
+ int i2c0_devs;
+
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
@@ -448,11 +449,11 @@ static void __init mop500_init_machine(void)
platform_device_register(&ab8500_device);
- i2c_register_board_info(0, mop500_i2c0_devices,
- ARRAY_SIZE(mop500_i2c0_devices));
- if (!machine_is_hrefv60())
- i2c_register_board_info(0, mop500_i2c0_old_devices,
- ARRAY_SIZE(mop500_i2c0_old_devices));
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ if (machine_is_hrefv60())
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0fefb34c11e..16647b25537 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -58,7 +58,7 @@
#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
-/* per7 base addressess */
+/* per7 base addresses */
#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000)
#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000)
#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000)
@@ -68,7 +68,7 @@
#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
-/* per6 base addressess */
+/* per6 base addresses */
#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
@@ -79,11 +79,11 @@
#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
-/* per5 base addressess */
+/* per5 base addresses */
#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
-/* per4 base addressess */
+/* per4 base addresses */
#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000)
#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000)
#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000)
@@ -106,7 +106,7 @@
#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
-/* per2 base addressess */
+/* per2 base addresses */
#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
deleted file mode 100644
index ca2b15b1b3b..00000000000
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is based ARM realview platform.
- * Copyright (C) ARM Limited.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* This is required to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 4fff4d40841..0c527fe2ceb 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,10 +18,14 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
@@ -94,7 +98,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu);
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -162,6 +166,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index eb7ffa0ee8b..0c99cf076c6 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <asm/irq.h>
@@ -42,7 +43,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
@@ -190,27 +190,7 @@ void __init versatile_map_io(void)
#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-static int versatile_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-
- return 0;
-}
-
-static void versatile_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static void versatile_flash_set_vpp(int on)
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
@@ -222,11 +202,8 @@ static void versatile_flash_set_vpp(int on)
__raw_writel(val, VERSATILE_FLASHCTRL);
}
-static struct flash_platform_data versatile_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data versatile_flash_data = {
.width = 4,
- .init = versatile_flash_init,
- .exit = versatile_flash_exit,
.set_vpp = versatile_flash_set_vpp,
};
@@ -237,7 +214,7 @@ static struct resource versatile_flash_resource = {
};
static struct platform_device versatile_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &versatile_flash_data,
@@ -375,6 +352,10 @@ static struct clk ref24_clk = {
.rate = 24000000,
};
+static struct clk sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup lookups[] = {
@@ -411,7 +392,10 @@ static struct clk_lookup lookups[] = {
}, { /* CLCD */
.dev_id = "dev:20",
.clk = &osc4_clk,
- }
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .clk = &sp804_clk,
+ },
};
/*
@@ -764,8 +748,8 @@ static void __init versatile_timer_init(void)
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
- sp804_clocksource_init(TIMER3_VA_BASE);
- sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
+ sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
+ sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
}
struct sys_timer versatile_timer = {
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index ebc22e75932..765a71ff7f3 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -71,8 +71,9 @@ static void __init ct_ca9x4_timer_init(void)
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
- sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
- sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+ sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1");
+ sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0,
+ "ct-timer0");
}
static struct sys_timer ct_ca9x4_timer = {
@@ -141,10 +142,22 @@ static struct clk osc1_clk = {
.rate = 24000000,
};
+static struct clk ct_sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk_lookup lookups[] = {
{ /* CLCD */
.dev_id = "ct:clcd",
.clk = &osc1_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "ct-timer0",
+ .clk = &ct_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "ct-timer1",
+ .clk = &ct_sp804_clk,
},
};
@@ -210,6 +223,8 @@ static void ct_ca9x4_init_cpu_map(void)
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
static void ct_ca9x4_smp_enable(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
deleted file mode 100644
index 4c05e4a9713..00000000000
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index ba46e8e0743..285edcd2da2 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -13,11 +13,11 @@
#include <linux/sysdev.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
@@ -65,8 +65,9 @@ static void __init v2m_timer_init(void)
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
- sp804_clocksource_init(MMIO_P2V(V2M_TIMER1));
- sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0);
+ sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1");
+ sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0,
+ "v2m-timer0");
}
static struct sys_timer v2m_timer = {
@@ -206,27 +207,13 @@ static struct platform_device v2m_usb_device = {
.dev.platform_data = &v2m_usb_config,
};
-static int v2m_flash_init(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
- return 0;
-}
-
-static void v2m_flash_exit(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
-}
-
-static void v2m_flash_set_vpp(int on)
+static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
}
-static struct flash_platform_data v2m_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data v2m_flash_data = {
.width = 4,
- .init = v2m_flash_init,
- .exit = v2m_flash_exit,
.set_vpp = v2m_flash_set_vpp,
};
@@ -243,7 +230,7 @@ static struct resource v2m_flash_resources[] = {
};
static struct platform_device v2m_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = -1,
.resource = v2m_flash_resources,
.num_resources = ARRAY_SIZE(v2m_flash_resources),
@@ -333,6 +320,10 @@ static struct clk osc2_clk = {
.rate = 24000000,
};
+static struct clk v2m_sp804_clk = {
+ .rate = 1000000,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup v2m_lookups[] = {
@@ -363,6 +354,14 @@ static struct clk_lookup v2m_lookups[] = {
}, { /* CLCD */
.dev_id = "mb:clcd",
.clk = &osc1_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer0",
+ .clk = &v2m_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer1",
+ .clk = &v2m_sp804_clk,
},
};
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4b089cb930d..a2c4e2d0a0d 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -43,7 +43,6 @@
#define PRESCALE 0x63 /* Divider = prescale + 1 */
#define TDR_SHIFT 24
-#define TDR_MASK ((1 << TDR_SHIFT) - 1)
static unsigned int timer0_load;
@@ -143,19 +142,6 @@ static void __init nuc900_clockevents_init(void)
clockevents_register_device(&nuc900_clockevent_device);
}
-static cycle_t nuc900_get_cycles(struct clocksource *cs)
-{
- return (~__raw_readl(REG_TDR1)) & TDR_MASK;
-}
-
-static struct clocksource clocksource_nuc900 = {
- .name = "nuc900-timer1",
- .rating = 200,
- .read = nuc900_get_cycles,
- .mask = CLOCKSOURCE_MASK(TDR_SHIFT),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void __init nuc900_clocksource_init(void)
{
unsigned int val;
@@ -175,7 +161,8 @@ static void __init nuc900_clocksource_init(void)
val |= (COUNTEN | PERIOD | PRESCALE);
__raw_writel(val, REG_TCSR1);
- clocksource_register_hz(&clocksource_nuc900, rate);
+ clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200,
+ TDR_SHIFT, clocksource_mmio_readl_down);
}
static void __init nuc900_timer_init(void)
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index d3644db467b..f40c69656d8 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -32,7 +32,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*
* Size Clean (ticks) Dirty (ticks)
* 4096 21 20 21 53 55 54
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 49c2b66cf3d..a7b276dbda1 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -34,7 +34,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*
* *** This needs benchmarking
*/
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 6136e68ce95..dc18d81ef8c 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all)
* Flush the entire cache system.
* The data cache flush is now achieved using atomic clean / invalidates
* working outwards from L1 cache. This is done using Set/Way based cache
- * maintainance instructions.
+ * maintenance instructions.
* The instruction cache can still be invalidated back to the point of
* unification in a single instruction.
*
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 49eaad9136a..76f82ae44ef 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -413,7 +413,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
* Convert start_pfn/end_pfn to a struct page pointer.
*/
start_pg = pfn_to_page(start_pfn - 1) + 1;
- end_pg = pfn_to_page(end_pfn);
+ end_pg = pfn_to_page(end_pfn - 1) + 1;
/*
* Convert to physical addresses, and
@@ -447,6 +447,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
bank_start = bank_pfn_start(bank);
+#ifdef CONFIG_SPARSEMEM
+ /*
+ * Take care not to free memmap entries that don't exist
+ * due to SPARSEMEM sections which aren't present.
+ */
+ bank_start = min(bank_start,
+ ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
/*
* If we had a previous bank, and there is a space
* between the current bank and the previous, free it.
@@ -461,6 +469,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
*/
prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
}
+
+#ifdef CONFIG_SPARSEMEM
+ if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+ free_memmap(prev_bank_end,
+ ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
}
static void __init free_highpages(void)
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index afe209e1e1f..74be05f3e03 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
#include <linux/shm.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/personality.h>
#include <linux/random.h>
#include <asm/cputype.h>
#include <asm/system.h>
@@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
mm->cached_hole_size = 0;
}
/* 8 bits of randomness in 20 address space bits */
- if (current->flags & PF_RANDOMIZE)
+ if ((current->flags & PF_RANDOMIZE) &&
+ !(current->personality & ADDR_NO_RANDOMIZE))
addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
full_search:
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 226e3d8351c..6c4e7fd6c8a 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -64,7 +64,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 32768
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 86d9c2cf0bc..4ce947c1962 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -64,7 +64,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 32768
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 83d3dd34f84..c8884c5413a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -53,7 +53,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 32768
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 686043ee728..413684660aa 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -53,7 +53,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 32768
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 665266da143..7a06e5964f5 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin)
/*
* Function: arm720_proc_do_idle(void)
* Params : r0 = unused
- * Purpose : put the processer in proper idle mode
+ * Purpose : put the processor in proper idle mode
*/
ENTRY(cpu_arm720_do_idle)
mov pc, lr
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 219980ec8b6..bf8a1d1cccb 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -53,7 +53,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 65536
@@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
.equ cpu_arm920_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 36154b1e792..95ba1fc56e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -54,7 +54,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions. (I think this should
+ * cache line maintenance instructions. (I think this should
* be 32768).
*/
#define CACHE_DLIMIT 8192
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 89c5e0009c4..541e4774eea 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -77,7 +77,7 @@
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
*/
#define CACHE_DLIMIT 8192
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 6a4bdb2c94a..0ed85d930c0 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
.equ cpu_arm926_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e32fa499194..34261f9486b 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -85,7 +85,7 @@
/*
* Sanity check the PTE configuration for the code below - which makes
- * certain assumptions about how these bits are layed out.
+ * certain assumptions about how these bits are laid out.
*/
#ifdef CONFIG_MMU
#if L_PTE_SHARED != PTE_EXT_SHARED
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 74483d1977f..184a9c997e3 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
.globl cpu_sa1100_suspend_size
.equ cpu_sa1100_suspend_size, 4*4
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 832b6bdc192..7c99cb4c8e4 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
.equ cpu_v6_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
@@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend)
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
mrc p15, 0, r11, c1, c0, 0 @ control register
stmia r0, {r4 - r11}
@@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume)
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 262fa88a743..babfba09c89 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -211,7 +211,7 @@ cpu_v7_name:
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
@@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume)
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
- mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 63d8b2044e8..596213699f3 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
.globl cpu_xsc3_suspend_size
.equ cpu_xsc3_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 086038cd86a..42af97664c9 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area)
teq r2, #DMA_TO_DEVICE
beq xscale_dma_clean_range
b xscale_dma_flush_range
-ENDPROC(xscsale_dma_a0_map_area)
+ENDPROC(xscale_dma_a0_map_area)
/*
* dma_unmap_area(start, size, dir)
@@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext)
.globl cpu_xscale_suspend_size
.equ cpu_xscale_suspend_size, 4 * 7
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index ce81481becf..4268a2bdf14 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -13,7 +13,7 @@
/*
* A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
* the CPU clock speed on the fly.
*/
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d69d343ff61..d3467f818c3 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -83,26 +83,12 @@ static void epit_irq_acknowledge(void)
__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
}
-static cycle_t epit_read(struct clocksource *cs)
-{
- return 0 - __raw_readl(timer_base + EPITCNR);
-}
-
-static struct clocksource clocksource_epit = {
- .name = "epit",
- .rating = 200,
- .read = epit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int __init epit_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- clocksource_register_hz(&clocksource_epit, c);
-
- return 0;
+ return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+ clocksource_mmio_readl_down);
}
/* clock event */
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7a107246fd9..6cd6d7f686f 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
{
int i, j;
@@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
__raw_writel(~0, port[i].base + GPIO_ISR);
for (j = port[i].virtual_irq_start;
j < port[i].virtual_irq_start + 32; j++) {
+ irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_and_handler(j, &gpio_irq_chip,
handle_level_irq);
set_irq_flags(j, IRQF_VALID);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index bd9bb979914..2e49e71b1b9 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -33,9 +33,9 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
- @ this macro checks which interrupt occured
+ @ this macro checks which interrupt occurred
@ and returns its number in irqnr
- @ and returns if an interrupt occured in irqstat
+ @ and returns if an interrupt occurred in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#ifndef CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 04c0d060d81..6bb96ef1600 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -24,7 +24,7 @@
struct mxc_nand_platform_data {
unsigned int width; /* data bus width in bytes */
- unsigned int hw_ecc:1; /* 0 if supress hardware ECC */
+ unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */
unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
struct mtd_partition *parts; /* partition table */
int nr_parts; /* size of parts */
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 4ddce565b35..8397a2dd19f 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -124,6 +124,8 @@ imx_ssi_fiq_start:
1:
@ return from FIQ
subs pc, lr, #4
+
+ .align
imx_ssi_fiq_base:
.word 0x0
imx_ssi_fiq_rx_buffer:
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 2237ff8b434..e4ac94a8683 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -106,56 +106,32 @@ static void gpt_irq_acknowledge(void)
__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
}
-static cycle_t dummy_get_cycles(struct clocksource *cs)
-{
- return 0;
-}
-
-static cycle_t mx1_2_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + MX1_2_TCN);
-}
-
-static cycle_t v2_get_cycles(struct clocksource *cs)
-{
- return __raw_readl(timer_base + V2_TCN);
-}
-
-static struct clocksource clocksource_mxc = {
- .name = "mxc_timer1",
- .rating = 200,
- .read = dummy_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+static void __iomem *sched_clock_reg;
static DEFINE_CLOCK_DATA(cd);
unsigned long long notrace sched_clock(void)
{
- cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
static void notrace mxc_update_sched_clock(void)
{
- cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
update_sched_clock(&cd, cyc, (u32)~0);
}
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
+ void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
- if (timer_is_v2())
- clocksource_mxc.read = v2_get_cycles;
- else
- clocksource_mxc.read = mx1_2_get_cycles;
+ sched_clock_reg = reg;
init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
- clocksource_register_hz(&clocksource_mxc, c);
-
- return 0;
+ return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
+ clocksource_mmio_readl_up);
}
/* clock event */
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 187f4e84bb2..18296ee6880 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,6 +5,7 @@
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
+ select CLKSRC_MMIO
default y
help
Common platform code for Nomadik and other ST-Ericsson
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 41723402006..ef74e157a9d 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -26,29 +26,6 @@
void __iomem *mtu_base; /* Assigned by machine code */
/*
- * Kernel assumes that sched_clock can be called early
- * but the MTU may not yet be initialized.
- */
-static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
-{
- return 0;
-}
-
-/* clocksource: MTU decrements, so we negate the value being read. */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
- return -readl(mtu_base + MTU_VAL(0));
-}
-
-static struct clocksource nmdk_clksrc = {
- .name = "mtu_0",
- .rating = 200,
- .read = nmdk_read_timer_dummy,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
@@ -172,12 +149,10 @@ void __init nmdk_timer_init(void)
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- /* Now the clock source is ready */
- nmdk_clksrc.read = nmdk_read_timer;
-
- if (clocksource_register_hz(&nmdk_clksrc, rate))
+ if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+ rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
- nmdk_clksrc.name);
+ "mtu_0");
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index cd5f993612f..e9c0efc5d4a 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -12,6 +12,7 @@ choice
config ARCH_OMAP1
bool "TI OMAP1"
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
help
"Systems based on omap7xx, omap15xx or omap16xx"
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 7d9f815cede..ea28f98d5d6 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base);
* Claiming GPIOs, and setting their direction and initial values, is the
* responsibility of the device drivers. So is responding to probe().
*
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
* kept out of drivers as much as possible. In particular, pin setup
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2ec3b5d9f21..c22217c2ee5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback);
* If the channel is running the caller must disable interrupts prior calling
* this function and process the returned value before re-enabling interrupt to
* prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * is a chance for CSSA_L register overflow between the two reads resulting
* in incorrect return value.
*/
dma_addr_t omap_get_dma_src_pos(int lch)
@@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos);
* If the channel is running the caller must disable interrupts prior calling
* this function and process the returned value before re-enabling interrupt to
* prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * is a chance for CDSA_L register overflow between the two reads resulting
* in incorrect return value.
*/
dma_addr_t omap_get_dma_dst_pos(int lch)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2adcdda23c..bd9e32187ea 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -1372,9 +1372,7 @@ static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
.resume_noirq = omap_mpuio_resume_noirq,
};
-/* use platform_driver for this, now that there's no longer any
- * point to sys_device (other than not disturbing old code).
- */
+/* use platform_driver for this. */
static struct platform_driver omap_mpuio_driver = {
.driver = {
.name = "mpuio",
@@ -1745,7 +1743,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
}
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
+static int omap_gpio_suspend(void)
{
int i;
@@ -1795,12 +1793,12 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
return 0;
}
-static int omap_gpio_resume(struct sys_device *dev)
+static void omap_gpio_resume(void)
{
int i;
if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
- return 0;
+ return;
for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
@@ -1836,21 +1834,13 @@ static int omap_gpio_resume(struct sys_device *dev)
__raw_writel(bank->saved_wakeup, wake_set);
spin_unlock_irqrestore(&bank->lock, flags);
}
-
- return 0;
}
-static struct sysdev_class omap_gpio_sysclass = {
- .name = "gpio",
+static struct syscore_ops omap_gpio_syscore_ops = {
.suspend = omap_gpio_suspend,
.resume = omap_gpio_resume,
};
-static struct sys_device omap_gpio_device = {
- .id = 0,
- .cls = &omap_gpio_sysclass,
-};
-
#endif
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -2108,21 +2098,14 @@ postcore_initcall(omap_gpio_drv_reg);
static int __init omap_gpio_sysinit(void)
{
- int ret = 0;
-
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- if (ret == 0) {
- ret = sysdev_class_register(&omap_gpio_sysclass);
- if (ret == 0)
- ret = sysdev_register(&omap_gpio_device);
- }
- }
+ if (cpu_is_omap16xx() || cpu_class_is_omap2())
+ register_syscore_ops(&omap_gpio_syscore_ops);
#endif
- return ret;
+ return 0;
}
arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
index 3e6327016b4..3083195123e 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -11,6 +11,6 @@
#include <linux/mtd/map.h>
-extern void omap1_set_vpp(struct map_info *map, int enable);
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index d6f9fa0f62a..cac2e8ac696 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void);
/* Wrappers for "new style" GPIO calls, using the new infrastructure
* which lets us plug in FPGA, I2C, and other implementations.
* *
- * The original OMAP-specfic calls should eventually be removed.
+ * The original OMAP-specific calls should eventually be removed.
*/
#include <linux/errno.h>
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 12b31616503..1527929b445 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -90,7 +90,7 @@ enum omap_ecc {
/* 1-bit ecc: stored at end of spare area */
OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
- /* 1-bit ecc: stored at begining of spare area as romcode */
+ /* 1-bit ecc: stored at beginning of spare area as romcode */
OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
};
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
deleted file mode 100644
index 7a10257909e..00000000000
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * OMAP4 machine specific smp.h
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Interface functions needed for the SMP. This file is based on arm
- * realview smp platform.
- * Copyright (c) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_SMP_H
-#define OMAP_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-
-/*
- * We use Soft IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 8a51fd58f65..34fc31ee908 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
clk_enable(obj->clk);
errs = iommu_report_fault(obj, &da);
clk_disable(obj->clk);
+ if (errs == 0)
+ return IRQ_HANDLED;
/* Fault callback or TLB/PTE Dynamic loading */
if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index d598d9fd65a..5587acf0eb2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
/* resend */
return -1;
} else {
- /* wait for recieve confirmation */
+ /* wait for receive confirmation */
int attemps = 0;
while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
if (attemps++ > 1000) {
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9acb73..a37b8eb65b7 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -536,6 +536,28 @@ int omap_early_device_register(struct omap_device *od)
return 0;
}
+static int _od_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return omap_device_idle(pdev);
+}
+
+static int _od_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return omap_device_enable(pdev);
+}
+
+static struct dev_power_domain omap_device_power_domain = {
+ .ops = {
+ .runtime_suspend = _od_runtime_suspend,
+ .runtime_resume = _od_runtime_resume,
+ USE_PLATFORM_PM_SLEEP_OPS
+ }
+};
+
/**
* omap_device_register - register an omap_device with one omap_hwmod
* @od: struct omap_device * to register
@@ -549,6 +571,7 @@ int omap_device_register(struct omap_device *od)
pr_debug("omap_device: %s: registering\n", od->pdev.name);
od->pdev.dev.parent = &omap_device_parent;
+ od->pdev.dev.pwr_domain = &omap_device_power_domain;
return platform_device_register(&od->pdev);
}
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 742b0323c57..69a61367e4b 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -81,24 +81,6 @@ static void __init setup_sched_clock(unsigned long tclk)
}
/*
- * Clocksource handling.
- */
-static cycle_t orion_clksrc_read(struct clocksource *cs)
-{
- return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
-}
-
-static struct clocksource orion_clksrc = {
- .name = "orion_clocksource",
- .rating = 300,
- .read = orion_clksrc_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-
-/*
* Clockevent handling.
*/
static int
@@ -247,7 +229,8 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
- clocksource_register_hz(&orion_clksrc, tclk);
+ clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
+ tclk, 300, 32, clocksource_mmio_readl_down);
/*
* Setup clockevent timer (interrupt-driven).
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index dce088f4567..48ebb9479b6 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <mach/gpio.h>
@@ -295,7 +295,7 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
}
#ifdef CONFIG_PM
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_gpio_suspend(void)
{
struct pxa_gpio_chip *c;
int gpio;
@@ -312,7 +312,7 @@ static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int pxa_gpio_resume(struct sys_device *dev)
+static void pxa_gpio_resume(void)
{
struct pxa_gpio_chip *c;
int gpio;
@@ -326,22 +326,13 @@ static int pxa_gpio_resume(struct sys_device *dev)
__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
}
- return 0;
}
#else
#define pxa_gpio_suspend NULL
#define pxa_gpio_resume NULL
#endif
-struct sysdev_class pxa_gpio_sysclass = {
- .name = "gpio",
+struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
-
-static int __init pxa_gpio_init(void)
-{
- return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 75f65647124..89e68e07b0a 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t;
*
* mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
* represents a range of MFP pins from "start" to "end", with the offset
- * begining at "offset", to define a single pin, let "end" = -1.
+ * beginning at "offset", to define a single pin, let "end" = -1.
*
* use
*
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index a9aa5ad3f4e..be12eadcce2 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sysdev.h>
#include <plat/mfp.h>
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c2064c30871..0291bd6e236 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
-# Architecture dependant builds
+# Architecture dependent builds
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index eea75ff81d1..b3d3d027899 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
/* whilst we will be called later on, we try and re-set the
* cpu frequencies as soon as possible so that we do not end
- * up resuming devices and then immediatley having to re-set
+ * up resuming devices and then immediately having to re-set
* a number of settings once these devices have restarted.
*
* as a note, it is expected devices are not used until they
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 6ad274e7593..c10d10c56e2 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -22,7 +22,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/io.h>
@@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
break;
case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* I belive in this case we do not have anything to do
+ /* I believe in this case we do not have anything to do
* until the next buffer comes along, and we turn off the
* reload */
return;
@@ -1195,19 +1195,12 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
EXPORT_SYMBOL(s3c2410_dma_getposition);
-static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
-{
- return container_of(dev, struct s3c2410_dma_chan, dev);
-}
-
-/* system device class */
+/* system core operations */
#ifdef CONFIG_PM
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
{
- struct s3c2410_dma_chan *cp = to_dma_chan(dev);
-
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
@@ -1222,13 +1215,21 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
s3c2410_dma_dostop(cp);
}
+}
+
+static int s3c2410_dma_suspend(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans;
+ int channel;
+
+ for (channel = 0; channel < dma_channels; cp++, channel++)
+ s3c2410_dma_suspend_chan(cp);
return 0;
}
-static int s3c2410_dma_resume(struct sys_device *dev)
+static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
{
- struct s3c2410_dma_chan *cp = to_dma_chan(dev);
unsigned int no = cp->number | DMACH_LOW_LEVEL;
/* restore channel's hardware configuration */
@@ -1249,13 +1250,21 @@ static int s3c2410_dma_resume(struct sys_device *dev)
return 0;
}
+static void s3c2410_dma_resume(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
+ int channel;
+
+ for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+ s3c2410_dma_resume_chan(cp);
+}
+
#else
#define s3c2410_dma_suspend NULL
#define s3c2410_dma_resume NULL
#endif /* CONFIG_PM */
-struct sysdev_class dma_sysclass = {
- .name = "s3c24xx-dma",
+struct syscore_ops dma_syscore_ops = {
.suspend = s3c2410_dma_suspend,
.resume = s3c2410_dma_resume,
};
@@ -1269,39 +1278,14 @@ static void s3c2410_dma_cache_ctor(void *p)
/* initialisation code */
-static int __init s3c24xx_dma_sysclass_init(void)
+static int __init s3c24xx_dma_syscore_init(void)
{
- int ret = sysdev_class_register(&dma_sysclass);
-
- if (ret != 0)
- printk(KERN_ERR "dma sysclass registration failed\n");
-
- return ret;
-}
-
-core_initcall(s3c24xx_dma_sysclass_init);
-
-static int __init s3c24xx_dma_sysdev_register(void)
-{
- struct s3c2410_dma_chan *cp = s3c2410_chans;
- int channel, ret;
-
- for (channel = 0; channel < dma_channels; cp++, channel++) {
- cp->dev.cls = &dma_sysclass;
- cp->dev.id = channel;
- ret = sysdev_register(&cp->dev);
-
- if (ret) {
- printk(KERN_ERR "error registering dev for dma %d\n",
- channel);
- return ret;
- }
- }
+ register_syscore_ops(&dma_syscore_ops);
return 0;
}
-late_initcall(s3c24xx_dma_sysdev_register);
+late_initcall(s3c24xx_dma_syscore_init);
int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
unsigned int stride)
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index c3624d89863..0efb2e2848c 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <plat/cpu.h>
@@ -65,7 +64,7 @@ static unsigned long save_extint[3];
static unsigned long save_eintflt[4];
static unsigned long save_eintmask;
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
{
unsigned int i;
@@ -81,7 +80,7 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
{
unsigned int i;
@@ -93,6 +92,4 @@ int s3c24xx_irq_resume(struct sys_device *dev)
s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
}
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 46dd078147d..cd6d67c8382 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
}
/*
- * chained GPIO irq has been sucessfully registered, allocate new gpio
+ * chained GPIO irq has been successfully registered, allocate new gpio
* int group and assign irq nubmers
*/
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 5259ad458bc..327acb3a446 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/sysdev.h>
#include <plat/cpu.h>
#include <plat/irqs.h>
@@ -77,17 +76,15 @@ static struct sleep_save eint_save[] = {
SAVE_ITEM(S5P_EINT_MASK(3)),
};
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
{
s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
return 0;
}
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
{
s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-
- return 0;
}
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c
index d592b6304b4..d15dc47b0e3 100644
--- a/arch/arm/plat-s5p/pm.c
+++ b/arch/arm/plat-s5p/pm.c
@@ -19,17 +19,6 @@
#define PFX "s5p pm: "
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
- /* nothing here yet */
-}
-
/* s3c_pm_configure_extint
*
* configure all external interrupt pins
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index 8090403eec0..899a8cc011f 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -290,7 +290,7 @@ static void __init s5p_clockevent_init(void)
setup_irq(irq_number, &s5p_clock_event_irq);
}
-static cycle_t s5p_timer_read(struct clocksource *cs)
+static void __iomem *s5p_timer_reg(void)
{
unsigned long offset = 0;
@@ -308,10 +308,17 @@ static cycle_t s5p_timer_read(struct clocksource *cs)
default:
printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return 0;
+ return NULL;
}
- return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset));
+ return S3C_TIMERREG(offset);
+}
+
+static cycle_t s5p_timer_read(struct clocksource *cs)
+{
+ void __iomem *reg = s5p_timer_reg();
+
+ return (cycle_t) (reg ? ~__raw_readl(reg) : 0);
}
/*
@@ -325,53 +332,22 @@ static DEFINE_CLOCK_DATA(cd);
unsigned long long notrace sched_clock(void)
{
- u32 cyc;
- unsigned long offset = 0;
-
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case S5P_PWM4:
- offset = 0x40;
- break;
+ void __iomem *reg = s5p_timer_reg();
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+ if (!reg)
return 0;
- }
- cyc = ~__raw_readl(S3C_TIMERREG(offset));
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
}
static void notrace s5p_update_sched_clock(void)
{
- u32 cyc;
- unsigned long offset = 0;
+ void __iomem *reg = s5p_timer_reg();
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case S5P_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- }
+ if (!reg)
+ return;
- cyc = ~__raw_readl(S3C_TIMERREG(offset));
- update_sched_clock(&cd, cyc, (u32)~0);
+ update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
}
struct clocksource time_clocksource = {
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 9a82b887491..983c578b827 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -21,7 +21,7 @@ struct clk;
* @set_parent: set the clock's parent, see clk_set_parent().
*
* Group the common clock implementations together so that we
- * don't have to keep setting the same fiels again. We leave
+ * don't have to keep setting the same fields again. We leave
* enable in struct clk.
*
* Adding an extra layer of indirection into the process should
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index cedfff51c82..3aedac0034b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -68,6 +68,12 @@ extern void s3c24xx_init_uartdevs(char *name,
struct sys_timer;
extern struct sys_timer s3c24xx_timer;
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 5603db0b79b..3ad8386599c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
* of control per GPIO, generally in the form of:
* 0000 = Input
* 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
*
* Note, since the code to deal with the case where there are two control
* registers instead of one, we do not have a separate set of functions for
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 5e04fa6eda7..1762dcb4cb9 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
*
* These values control the state of the weak pull-{up,down} resistors
* available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
+ * up or down settings, and it may be dependent on the chip that is being
* used to whether the particular mode is available.
*/
#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00)
@@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
* @pull: The configuration for the pull resistor.
*
* This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
+ * specified pin. It will return 0 if successful, or a negative error
* code if the pin cannot support the requested pull setting.
*
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
@@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
* @drvstr: The new value of the driver strength
*
* This function sets the driver strength value for the specified pin.
- * It will return 0 if successfull, or a negative error code if the pin
+ * It will return 0 if successful, or a negative error code if the pin
* cannot support the requested setting.
*/
extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index dac35d0a711..8cad4cf19c3 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
* of control per GPIO, generally in the form of:
* 0000 = Input
* 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
*
* Note, since the code to deal with the case where there are two control
* registers instead of one, we do not have a separate set of function
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 937cc2ace51..7fb6f6be8c8 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -103,14 +103,16 @@ extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
#ifdef CONFIG_PM
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
+extern int s3c24xx_irq_suspend(void);
+extern void s3c24xx_irq_resume(void);
#else
#define s3c_irqext_wake NULL
#define s3c24xx_irq_suspend NULL
#define s3c24xx_irq_resume NULL
#endif
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
/* PM debug functions */
#ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index b0bdf16549d..058e09654fe 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,7 +57,7 @@ enum clk_types {
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
- * changing of driver-strength and other controls dependant on
+ * changing of driver-strength and other controls dependent on
* the card and speed of operation.
*
* Initialisation data specific to either the machine or the platform
@@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
-/* Helper function availablity */
+/* Helper function availability */
extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index e4baf76f374..6b733fafe7c 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
*/
static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
{
- void *save_at = phys_to_virt(s3c_sleep_save_phys);
unsigned long addr;
unsigned long left;
void *stkpage;
@@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
goto skip_check;
}
- if (in_region(ptr, left, save_at, 32*4 )) {
- S3C_PMDBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
/* calculate and check the checksum */
calc = crc32_le(~0, ptr, left);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index d5b58d31903..5c0a440d6e1 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
*
* print any IRQs asserted at resume time (ie, we woke from)
*/
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
+static void __maybe_unused s3c_pm_show_resume_irqs(int start,
+ unsigned long which,
+ unsigned long mask)
{
int i;
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index b4ff8d74ac4..f85638c6f5a 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -68,7 +68,7 @@ struct s3c_pl330_xfer {
* @req: Two requests to communicate with the PL330 engine.
* @callback_fn: Callback function to the client.
* @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @xfer_head: Pointer to the xfer to be next executed.
* @dmac: Pointer to the DMAC that manages this channel, NULL if the
* channel is available to be acquired.
* @client: Client of this channel. NULL if the
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 2ae6606930a..fcc0d0ad4a1 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -89,7 +89,7 @@ struct rate_config {
* @sibling: node for list of clocks having same parents
* @private_data: clock specific private data
* @node: list to maintain clocks linearly
- * @cl: clocklook up assoicated with this clock
+ * @cl: clocklook up associated with this clock
* @dent: object for debugfs
*/
struct clk {
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index dbb6e4fff79..0c77e429867 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -70,19 +70,6 @@ static void clockevent_set_mode(enum clock_event_mode mode,
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
-static cycle_t clocksource_read_cycles(struct clocksource *cs)
-{
- return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
-}
-
-static struct clocksource clksrc = {
- .name = "tmr1",
- .rating = 200, /* its a pretty decent clock */
- .read = clocksource_read_cycles,
- .mask = 0xFFFF, /* 16 bits */
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void spear_clocksource_init(void)
{
u32 tick_rate;
@@ -103,7 +90,8 @@ static void spear_clocksource_init(void)
writew(val, gpt_base + CR(CLKSRC));
/* register the clocksource */
- clocksource_register_hz(&clksrc, tick_rate);
+ clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
+ 200, 16, clocksource_mmio_readw_up);
}
static struct clock_event_device clkevt = {
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
deleted file mode 100644
index 2cf37c35951..00000000000
--- a/arch/arm/plat-stmp3xxx/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-if ARCH_STMP3XXX
-
-menu "Freescale STMP3xxx implementations"
-
-choice
- prompt "Select STMP3xxx chip family"
-
-config ARCH_STMP37XX
- bool "Freescale SMTP37xx"
- select CPU_ARM926T
- ---help---
- STMP37xx refers to 3700 through 3769 chips
-
-config ARCH_STMP378X
- bool "Freescale STMP378x"
- select CPU_ARM926T
- ---help---
- STMP378x refers to 3780 through 3789 chips
-
-endchoice
-
-choice
- prompt "Select STMP3xxx board type"
-
-config MACH_STMP37XX
- depends on ARCH_STMP37XX
- bool "Freescale STMP37xx development board"
-
-config MACH_STMP378X
- depends on ARCH_STMP378X
- bool "Freescale STMP378x development board"
-
-endchoice
-
-endmenu
-
-endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
deleted file mode 100644
index 31dd518f37a..00000000000
--- a/arch/arm/plat-stmp3xxx/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Object file lists.
-obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
deleted file mode 100644
index 2e712e17ce7..00000000000
--- a/arch/arm/plat-stmp3xxx/clock.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*
- * Clock manipulation routines for Freescale STMP37XX/STMP378X
- *
- * Author: Vitaly Wool <vital@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define DEBUG
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-#include <mach/platform.h>
-#include <mach/regs-clkctrl.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static struct clk osc_24M;
-static struct clk pll_clk;
-static struct clk cpu_clk;
-static struct clk hclk;
-
-static int propagate_rate(struct clk *);
-
-static inline int clk_is_busy(struct clk *clk)
-{
- return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
-}
-
-static inline int clk_good(struct clk *clk)
-{
- return clk && !IS_ERR(clk) && clk->ops;
-}
-
-static int std_clk_enable(struct clk *clk)
-{
- if (clk->enable_reg) {
- u32 clk_reg = __raw_readl(clk->enable_reg);
- if (clk->enable_negate)
- clk_reg &= ~(1 << clk->enable_shift);
- else
- clk_reg |= (1 << clk->enable_shift);
- __raw_writel(clk_reg, clk->enable_reg);
- if (clk->enable_wait)
- udelay(clk->enable_wait);
- return 0;
- } else
- return -EINVAL;
-}
-
-static int std_clk_disable(struct clk *clk)
-{
- if (clk->enable_reg) {
- u32 clk_reg = __raw_readl(clk->enable_reg);
- if (clk->enable_negate)
- clk_reg |= (1 << clk->enable_shift);
- else
- clk_reg &= ~(1 << clk->enable_shift);
- __raw_writel(clk_reg, clk->enable_reg);
- return 0;
- } else
- return -EINVAL;
-}
-
-static int io_set_rate(struct clk *clk, u32 rate)
-{
- u32 reg_frac, clkctrl_frac;
- int i, ret = 0, mask = 0x1f;
-
- clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
-
- if (clkctrl_frac < 18 || clkctrl_frac > 35) {
- ret = -EINVAL;
- goto out;
- }
-
- reg_frac = __raw_readl(clk->scale_reg);
- reg_frac &= ~(mask << clk->scale_shift);
- __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
- clk->scale_reg);
- if (clk->busy_reg) {
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i)
- ret = -ETIMEDOUT;
- else
- ret = 0;
- }
-out:
- return ret;
-}
-
-static long io_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
- int mask = 0x1f;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- clk->rate = rate;
-
- return rate;
-}
-
-static long per_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
- long div;
- const int mask = 0xff;
-
- if (clk->enable_reg &&
- !(__raw_readl(clk->enable_reg) & clk->enable_shift))
- clk->rate = 0;
- else {
- div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- if (div)
- rate /= div;
- clk->rate = rate;
- }
-
- return clk->rate;
-}
-
-static int per_set_rate(struct clk *clk, u32 rate)
-{
- int ret = -EINVAL;
- int div = (clk->parent->rate + rate - 1) / rate;
- u32 reg_frac;
- const int mask = 0xff;
- int try = 10;
- int i = -1;
-
- if (div == 0 || div > mask)
- goto out;
-
- reg_frac = __raw_readl(clk->scale_reg);
- reg_frac &= ~(mask << clk->scale_shift);
-
- while (try--) {
- __raw_writel(reg_frac | (div << clk->scale_shift),
- clk->scale_reg);
-
- if (clk->busy_reg) {
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- }
- if (i)
- break;
- }
-
- if (!i)
- ret = -ETIMEDOUT;
- else
- ret = 0;
-
-out:
- if (ret != 0)
- printk(KERN_ERR "%s: error %d\n", __func__, ret);
- return ret;
-}
-
-static long lcdif_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
- long div;
- const int mask = 0xff;
-
- div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- if (div) {
- rate /= div;
- div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
- BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
- rate /= div;
- }
- clk->rate = rate;
-
- return rate;
-}
-
-static int lcdif_set_rate(struct clk *clk, u32 rate)
-{
- int ret = 0;
- /*
- * On 3700, we can get most timings exact by modifying ref_pix
- * and the divider, but keeping the phase timings at 1 (2
- * phases per cycle).
- *
- * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
- * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
- *
- * ns_cycle >= 2*18e3/(18*480) = 25/6
- * ns_cycle <= 2*35e3/(18*480) = 875/108
- *
- * Multiply the ns_cycle by 'div' to lengthen it until it fits the
- * bounds. This is the divider we'll use after ref_pix.
- *
- * 6 * ns_cycle >= 25 * div
- * 108 * ns_cycle <= 875 * div
- */
- u32 ns_cycle = 1000000 / rate;
- u32 div, reg_val;
- u32 lowest_result = (u32) -1;
- u32 lowest_div = 0, lowest_fracdiv = 0;
-
- for (div = 1; div < 256; ++div) {
- u32 fracdiv;
- u32 ps_result;
- int lower_bound = 6 * ns_cycle >= 25 * div;
- int upper_bound = 108 * ns_cycle <= 875 * div;
- if (!lower_bound)
- break;
- if (!upper_bound)
- continue;
- /*
- * Found a matching div. Calculate fractional divider needed,
- * rounded up.
- */
- fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
- ns_cycle + 1000 * div - 1) /
- (1000 * div);
- if (fracdiv < 18 || fracdiv > 35) {
- ret = -EINVAL;
- goto out;
- }
- /* Calculate the actual cycle time this results in */
- ps_result = 6250 * div * fracdiv / 27;
-
- /* Use the fastest result that doesn't break ns_cycle */
- if (ps_result <= lowest_result) {
- lowest_result = ps_result;
- lowest_div = div;
- lowest_fracdiv = fracdiv;
- }
- }
-
- if (div >= 256 || lowest_result == (u32) -1) {
- ret = -EINVAL;
- goto out;
- }
- pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
- "PIXCLK=%uMHz cycle=%u.%03uns\n",
- lowest_fracdiv, lowest_div,
- 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
- lowest_result / 1000, lowest_result % 1000);
-
- /* Program ref_pix phase fractional divider */
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
- reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
- reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
-
- /* Ungate PFD */
- stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
-
- /* Program pix divider */
- reg_val = __raw_readl(clk->scale_reg);
- reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
- reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
- __raw_writel(reg_val, clk->scale_reg);
-
- /* Wait for divider update */
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- ret = -ETIMEDOUT;
- goto out;
- }
- }
-
- /* Switch to ref_pix source */
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
- reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
-
-out:
- return ret;
-}
-
-
-static int cpu_set_rate(struct clk *clk, u32 rate)
-{
- u32 reg_val;
-
- if (rate < 24000)
- return -EINVAL;
- else if (rate == 24000) {
- /* switch to the 24M source */
- clk_set_parent(clk, &osc_24M);
- } else {
- int i;
- u32 clkctrl_cpu = 1;
- u32 c = clkctrl_cpu;
- u32 clkctrl_frac = 1;
- u32 val;
- for ( ; c < 0x40; c++) {
- u32 f = (pll_clk.rate*18/c + rate/2) / rate;
- int s1, s2;
-
- if (f < 18 || f > 35)
- continue;
- s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
- s2 = pll_clk.rate*18/c/f - rate;
- pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
- if (abs(s1) > abs(s2)) {
- clkctrl_cpu = c;
- clkctrl_frac = f;
- }
- if (s2 == 0)
- break;
- };
- pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
- clkctrl_cpu, clkctrl_frac);
- if (c == 0x40) {
- int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
- rate;
- if (abs(d) > 100 ||
- clkctrl_frac < 18 || clkctrl_frac > 35)
- return -EINVAL;
- }
-
- /* 4.6.2 */
- val = __raw_readl(clk->scale_reg);
- val &= ~(0x3f << clk->scale_shift);
- val |= clkctrl_frac;
- clk_set_parent(clk, &osc_24M);
- udelay(10);
- __raw_writel(val, clk->scale_reg);
- /* ungate */
- __raw_writel(1<<7, clk->scale_reg + 8);
- /* write clkctrl_cpu */
- clk->saved_div = clkctrl_cpu;
-
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- reg_val &= ~0x3F;
- reg_val |= clkctrl_cpu;
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
-
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up CPU divisor\n");
- return -ETIMEDOUT;
- }
- clk_set_parent(clk, &pll_clk);
- clk->saved_div = 0;
- udelay(10);
- }
- return 0;
-}
-
-static long cpu_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
- rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
- rate = ((rate + 9) / 10) * 10;
- clk->rate = rate;
-
- return rate;
-}
-
-static long cpu_round_rate(struct clk *clk, u32 rate)
-{
- unsigned long r = 0;
-
- if (rate <= 24000)
- r = 24000;
- else {
- u32 clkctrl_cpu = 1;
- u32 clkctrl_frac;
- do {
- clkctrl_frac =
- (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
- if (clkctrl_frac > 35)
- continue;
- if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
- rate / 10)
- break;
- } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate);
- if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
- clkctrl_cpu--;
- pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
- clkctrl_cpu, clkctrl_frac);
- if (clkctrl_frac < 18)
- clkctrl_frac = 18;
- if (clkctrl_frac > 35)
- clkctrl_frac = 35;
-
- r = pll_clk.rate * 18;
- r /= clkctrl_frac;
- r /= clkctrl_cpu;
- r = 10 * ((r + 9) / 10);
- }
- return r;
-}
-
-static long emi_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
- rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
- clk->rate = rate;
-
- return rate;
-}
-
-static int clkseq_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- int shift = 8;
-
- /* bypass? */
- if (parent == &osc_24M)
- shift = 4;
-
- if (clk->bypass_reg) {
-#ifdef CONFIG_ARCH_STMP378X
- u32 hbus_val, cpu_val;
-
- if (clk == &cpu_clk && shift == 4) {
- hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_HBUS);
- cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_CPU);
-
- hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
- BM_CLKCTRL_HBUS_DIV);
- clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
- cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
- cpu_val |= 1;
-
- if (machine_is_stmp378x()) {
- __raw_writel(hbus_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
- __raw_writel(cpu_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- hclk.rate = 0;
- }
- } else if (clk == &cpu_clk && shift == 8) {
- hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_HBUS);
- cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_CPU);
- hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
- BM_CLKCTRL_HBUS_DIV);
- hbus_val |= 2;
- cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
- if (clk->saved_div)
- cpu_val |= clk->saved_div;
- else
- cpu_val |= 2;
-
- if (machine_is_stmp378x()) {
- __raw_writel(hbus_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
- __raw_writel(cpu_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- hclk.rate = 0;
- }
- }
-#endif
- __raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
-
- ret = 0;
- }
-
- return ret;
-}
-
-static int hbus_set_rate(struct clk *clk, u32 rate)
-{
- u8 div = 0;
- int is_frac = 0;
- u32 clkctrl_hbus;
- struct clk *parent = clk->parent;
-
- pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
- parent->rate);
-
- if (rate > parent->rate)
- return -EINVAL;
-
- if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
- parent->rate / rate < 32) {
- pr_debug("%s: switching to fractional mode\n", __func__);
- is_frac = 1;
- }
-
- if (is_frac)
- div = (32 * rate + parent->rate / 2) / parent->rate;
- else
- div = (parent->rate + rate - 1) / rate;
- pr_debug("%s: div calculated is %d\n", __func__, div);
- if (!div || div > 0x1f)
- return -EINVAL;
-
- clk_set_parent(&cpu_clk, &osc_24M);
- udelay(10);
- clkctrl_hbus = __raw_readl(clk->scale_reg);
- clkctrl_hbus &= ~0x3f;
- clkctrl_hbus |= div;
- clkctrl_hbus |= (is_frac << 5);
-
- __raw_writel(clkctrl_hbus, clk->scale_reg);
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up CPU divisor\n");
- return -ETIMEDOUT;
- }
- }
- clk_set_parent(&cpu_clk, &pll_clk);
- __raw_writel(clkctrl_hbus, clk->scale_reg);
- udelay(10);
- return 0;
-}
-
-static long hbus_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
-
- if (__raw_readl(clk->scale_reg) & 0x20) {
- rate *= __raw_readl(clk->scale_reg) & 0x1f;
- rate /= 32;
- } else
- rate /= __raw_readl(clk->scale_reg) & 0x1f;
- clk->rate = rate;
-
- return rate;
-}
-
-static int xbus_set_rate(struct clk *clk, u32 rate)
-{
- u16 div = 0;
- u32 clkctrl_xbus;
-
- pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
- clk->parent->rate);
-
- div = (clk->parent->rate + rate - 1) / rate;
- pr_debug("%s: div calculated is %d\n", __func__, div);
- if (!div || div > 0x3ff)
- return -EINVAL;
-
- clkctrl_xbus = __raw_readl(clk->scale_reg);
- clkctrl_xbus &= ~0x3ff;
- clkctrl_xbus |= div;
- __raw_writel(clkctrl_xbus, clk->scale_reg);
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up xbus divisor\n");
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
-static long xbus_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
-
- rate /= __raw_readl(clk->scale_reg) & 0x3ff;
- clk->rate = rate;
-
- return rate;
-}
-
-
-/* Clock ops */
-
-static struct clk_ops std_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = per_get_rate,
- .set_rate = per_set_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops min_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
-};
-
-static struct clk_ops cpu_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = cpu_get_rate,
- .set_rate = cpu_set_rate,
- .round_rate = cpu_round_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops io_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = io_get_rate,
- .set_rate = io_set_rate,
-};
-
-static struct clk_ops hbus_ops = {
- .get_rate = hbus_get_rate,
- .set_rate = hbus_set_rate,
-};
-
-static struct clk_ops xbus_ops = {
- .get_rate = xbus_get_rate,
- .set_rate = xbus_set_rate,
-};
-
-static struct clk_ops lcdif_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = lcdif_get_rate,
- .set_rate = lcdif_set_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops emi_ops = {
- .get_rate = emi_get_rate,
-};
-
-/* List of on-chip clocks */
-
-static struct clk osc_24M = {
- .flags = FIXED_RATE | ENABLED,
- .rate = 24000,
-};
-
-static struct clk pll_clk = {
- .parent = &osc_24M,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
- .enable_shift = 16,
- .enable_wait = 10,
- .flags = FIXED_RATE | ENABLED,
- .rate = 480000,
- .ops = &min_ops,
-};
-
-static struct clk cpu_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 0,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 7,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
- .busy_bit = 28,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &cpu_ops,
-};
-
-static struct clk io_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .enable_shift = 31,
- .enable_negate = 1,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 24,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &io_ops,
-};
-
-static struct clk hclk = {
- .parent = &cpu_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 7,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
- .busy_bit = 29,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &hbus_ops,
-};
-
-static struct clk xclk = {
- .parent = &osc_24M,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
- .busy_bit = 31,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &xbus_ops,
-};
-
-static struct clk uart_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 31,
- .enable_negate = 1,
- .flags = ENABLED,
- .ops = &min_ops,
-};
-
-static struct clk audio_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 30,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk pwm_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 29,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk dri_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 28,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk digctl_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 27,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk timer_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 26,
- .enable_negate = 1,
- .flags = ENABLED,
- .ops = &min_ops,
-};
-
-static struct clk lcdif_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 1,
- .flags = NEEDS_SET_PARENT,
- .ops = &lcdif_ops,
-};
-
-static struct clk ssp_clk = {
- .parent = &io_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .enable_shift = 31,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 5,
- .enable_negate = 1,
- .flags = NEEDS_SET_PARENT,
- .ops = &std_ops,
-};
-
-static struct clk gpmi_clk = {
- .parent = &io_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 4,
- .flags = NEEDS_SET_PARENT,
- .ops = &std_ops,
-};
-
-static struct clk spdif_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
- .enable_shift = 31,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk emi_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
- .enable_shift = 31,
- .enable_negate = 1,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 8,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
- .busy_bit = 28,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 6,
- .flags = ENABLED,
- .ops = &emi_ops,
-};
-
-static struct clk ir_clk = {
- .parent = &io_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 3,
- .ops = &min_ops,
-};
-
-static struct clk saif_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 0,
- .ops = &std_ops,
-};
-
-static struct clk usb_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
- .enable_shift = 18,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-/* list of all the clocks */
-static struct clk_lookup onchip_clks[] = {
- {
- .con_id = "osc_24M",
- .clk = &osc_24M,
- }, {
- .con_id = "pll",
- .clk = &pll_clk,
- }, {
- .con_id = "cpu",
- .clk = &cpu_clk,
- }, {
- .con_id = "hclk",
- .clk = &hclk,
- }, {
- .con_id = "xclk",
- .clk = &xclk,
- }, {
- .con_id = "io",
- .clk = &io_clk,
- }, {
- .con_id = "uart",
- .clk = &uart_clk,
- }, {
- .con_id = "audio",
- .clk = &audio_clk,
- }, {
- .con_id = "pwm",
- .clk = &pwm_clk,
- }, {
- .con_id = "dri",
- .clk = &dri_clk,
- }, {
- .con_id = "digctl",
- .clk = &digctl_clk,
- }, {
- .con_id = "timer",
- .clk = &timer_clk,
- }, {
- .con_id = "lcdif",
- .clk = &lcdif_clk,
- }, {
- .con_id = "ssp",
- .clk = &ssp_clk,
- }, {
- .con_id = "gpmi",
- .clk = &gpmi_clk,
- }, {
- .con_id = "spdif",
- .clk = &spdif_clk,
- }, {
- .con_id = "emi",
- .clk = &emi_clk,
- }, {
- .con_id = "ir",
- .clk = &ir_clk,
- }, {
- .con_id = "saif",
- .clk = &saif_clk,
- }, {
- .con_id = "usb",
- .clk = &usb_clk,
- },
-};
-
-static int __init propagate_rate(struct clk *clk)
-{
- struct clk_lookup *cl;
-
- for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
- cl++) {
- if (unlikely(!clk_good(cl->clk)))
- continue;
- if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
- cl->clk->ops->get_rate(cl->clk);
- if (cl->clk->flags & RATE_PROPAGATES)
- propagate_rate(cl->clk);
- }
- }
-
- return 0;
-}
-
-/* Exported API */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->ops->get_rate != NULL)
- return clk->ops->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(!clk_good(clk)))
- return 0;
-
- if (clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static inline int close_enough(long rate1, long rate2)
-{
- return rate1 && !((rate2 - rate1) * 1000 / rate1);
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (unlikely(!clk_good(clk)))
- goto out;
-
- if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
- goto out;
-
- else if (!close_enough(clk->rate, rate)) {
- ret = clk->ops->set_rate(clk, rate);
- if (ret < 0)
- goto out;
- clk->rate = rate;
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
- } else
- ret = 0;
-
-out:
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- return -EINVAL;
-
- if (clk->parent)
- clk_enable(clk->parent);
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- clk->usage++;
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
-
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void local_clk_disable(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return;
-
- if (clk->usage == 0 && clk->ops->disable)
- clk->ops->disable(clk);
-
- if (clk->parent)
- local_clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- return;
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- if ((--clk->usage) == 0 && clk->ops->disable)
- clk->ops->disable(clk);
-
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
- if (clk->parent)
- clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Some additional API */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -ENODEV;
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- goto out;
-
- if (!clk->ops->set_parent)
- goto out;
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- ret = clk->ops->set_parent(clk, parent);
- if (!ret) {
- /* disable if usage count is 0 */
- local_clk_disable(parent);
-
- parent->usage += clk->usage;
- clk->parent->usage -= clk->usage;
-
- /* disable if new usage count is 0 */
- local_clk_disable(clk->parent);
-
- clk->parent = parent;
- }
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
-
-out:
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return NULL;
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static int __init clk_init(void)
-{
- struct clk_lookup *cl;
- struct clk_ops *ops;
-
- spin_lock_init(&clocks_lock);
-
- for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
- cl++) {
- if (cl->clk->flags & ENABLED)
- clk_enable(cl->clk);
- else
- local_clk_disable(cl->clk);
-
- ops = cl->clk->ops;
-
- if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
- ops && ops->set_rate)
- ops->set_rate(cl->clk, cl->clk->rate);
-
- if (cl->clk->flags & FIXED_RATE) {
- if (cl->clk->flags & RATE_PROPAGATES)
- propagate_rate(cl->clk);
- } else {
- if (ops && ops->get_rate)
- ops->get_rate(cl->clk);
- }
-
- if (cl->clk->flags & NEEDS_SET_PARENT) {
- if (ops && ops->set_parent)
- ops->set_parent(cl->clk, cl->clk->parent);
- }
- }
- clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
- return 0;
-}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
deleted file mode 100644
index a6611e1a351..00000000000
--- a/arch/arm/plat-stmp3xxx/clock.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
- *
- * Author: Vitaly Wool <vital@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
-#define __ARCH_ARM_STMX3XXX_CLOCK_H__
-
-#ifndef __ASSEMBLER__
-
-struct clk_ops {
- int (*enable) (struct clk *);
- int (*disable) (struct clk *);
- long (*get_rate) (struct clk *);
- long (*round_rate) (struct clk *, u32);
- int (*set_rate) (struct clk *, u32);
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-struct clk {
- struct clk *parent;
- u32 rate;
- u32 flags;
- u8 scale_shift;
- u8 enable_shift;
- u8 bypass_shift;
- u8 busy_bit;
- s8 usage;
- int enable_wait;
- int enable_negate;
- u32 saved_div;
- void __iomem *enable_reg;
- void __iomem *scale_reg;
- void __iomem *bypass_reg;
- void __iomem *busy_reg;
- struct clk_ops *ops;
-};
-
-#endif /* __ASSEMBLER__ */
-
-/* Flags */
-#define RATE_PROPAGATES (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE (1<<2)
-#define FIXED_RATE (1<<3)
-#define ENABLED (1<<4)
-#define NEEDS_SET_PARENT (1<<5)
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
deleted file mode 100644
index 37b8a09148a..00000000000
--- a/arch/arm/plat-stmp3xxx/core.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X core routines
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/dma.h>
-#include <mach/regs-clkctrl.h>
-
-static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
-{
- u32 c;
- int timeout;
-
- /* the process of software reset of IP block is done
- in several steps:
-
- - clear SFTRST and wait for block is enabled;
- - clear clock gating (CLKGATE bit);
- - set the SFTRST again and wait for block is in reset;
- - clear SFTRST and wait for reset completion.
- */
- c = __raw_readl(hwreg);
- c &= ~(1<<31); /* clear SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<31)) == 0)
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when enabling\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<30); /* clear CLKGATE */
- __raw_writel(c, hwreg);
-
- if (!just_enable) {
- c = __raw_readl(hwreg);
- c |= (1<<31); /* now again set SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* poll until CLKGATE set */
- if (__raw_readl(hwreg) & (1<<30))
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when resetting\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<31); /* clear SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<31)) == 0)
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when enabling "
- "after reset\n", __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<30); /* clear CLKGATE */
- __raw_writel(c, hwreg);
- }
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<30)) == 0)
- break;
-
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- return 0;
-}
-
-int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
-{
- int try = 10;
- int r;
-
- while (try--) {
- r = __stmp3xxx_reset_block(hwreg, just_enable);
- if (!r)
- break;
- pr_debug("%s: try %d failed\n", __func__, 10 - try);
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_reset_block);
-
-struct platform_device stmp3xxx_dbguart = {
- .name = "stmp3xxx-dbguart",
- .id = -1,
-};
-
-void __init stmp3xxx_init(void)
-{
- /* Turn off auto-slow and other tricks */
- stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
-
- stmp3xxx_dma_init();
-}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
deleted file mode 100644
index 68fed4b8746..00000000000
--- a/arch/arm/plat-stmp3xxx/devices.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
-* Freescale STMP37XX/STMP378X platform devices
-*
-* Embedded Alley Solutions, Inc <source@embeddedalley.com>
-*
-* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
-* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
-*/
-
-/*
-* The code contained herein is licensed under the GNU General Public
-* License. You may obtain a copy of the GNU General Public License
-* Version 2 or later at the following locations:
-*
-* http://www.opensource.org/licenses/gpl-license.html
-* http://www.gnu.org/copyleft/gpl.html
-*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/dma.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-lcdif.h>
-#include <mach/regs-uartapp.h>
-#include <mach/regs-gpmi.h>
-#include <mach/regs-usbctrl.h>
-#include <mach/regs-ssp.h>
-#include <mach/regs-rtc.h>
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-static struct resource appuart_resources[] = {
- {
- .start = IRQ_UARTAPP_INTERNAL,
- .end = IRQ_UARTAPP_INTERNAL,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_UARTAPP_RX_DMA,
- .end = IRQ_UARTAPP_RX_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_UARTAPP_TX_DMA,
- .end = IRQ_UARTAPP_TX_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = REGS_UARTAPP1_PHYS,
- .end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- /* Rx DMA channel */
- .start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
- .flags = IORESOURCE_DMA,
- }, {
- /* Tx DMA channel */
- .start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device stmp3xxx_appuart = {
- .name = "stmp3xxx-appuart",
- .id = 0,
- .resource = appuart_resources,
- .num_resources = ARRAY_SIZE(appuart_resources),
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device stmp3xxx_watchdog = {
- .name = "stmp3xxx_wdt",
- .id = -1,
-};
-
-static struct resource ts_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_TOUCH_DETECT,
- .end = IRQ_TOUCH_DETECT,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LRADC_CH5,
- .end = IRQ_LRADC_CH5,
- },
-};
-
-struct platform_device stmp3xxx_touchscreen = {
- .name = "stmp3xxx_ts",
- .id = -1,
- .resource = ts_resource,
- .num_resources = ARRAY_SIZE(ts_resource),
-};
-
-/*
-* Keypad device
-*/
-struct platform_device stmp3xxx_keyboard = {
- .name = "stmp3xxx-keyboard",
- .id = -1,
-};
-
-static struct resource gpmi_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_GPMI_PHYS,
- .end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_GPMI_DMA,
- .end = IRQ_GPMI_DMA,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
- },
-};
-
-struct platform_device stmp3xxx_gpmi = {
- .name = "gpmi",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = gpmi_resources,
- .num_resources = ARRAY_SIZE(gpmi_resources),
-};
-
-static struct resource mmc1_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_SSP1_PHYS,
- .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_SSP1_DMA,
- .end = IRQ_SSP1_DMA,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_SSP_ERROR,
- .end = IRQ_SSP_ERROR,
- },
-};
-
-struct platform_device stmp3xxx_mmc = {
- .name = "stmp3xxx-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = mmc1_resource,
- .num_resources = ARRAY_SIZE(mmc1_resource),
-};
-
-static struct resource usb_resources[] = {
- {
- .start = REGS_USBCTRL_PHYS,
- .end = REGS_USBCTRL_PHYS + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_USB_CTRL,
- .end = IRQ_USB_CTRL,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_udc = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = usb_resources,
- .num_resources = ARRAY_SIZE(usb_resources),
-};
-
-struct platform_device stmp3xxx_ehci = {
- .name = "fsl-ehci",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = usb_resources,
- .num_resources = ARRAY_SIZE(usb_resources),
-};
-
-static struct resource rtc_resources[] = {
- {
- .start = REGS_RTC_PHYS,
- .end = REGS_RTC_PHYS + REGS_RTC_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_RTC_ALARM,
- .end = IRQ_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_RTC_1MSEC,
- .end = IRQ_RTC_1MSEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_rtc = {
- .name = "stmp3xxx-rtc",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static struct resource ssp1_resources[] = {
- {
- .start = REGS_SSP1_PHYS,
- .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_SSP1_DMA,
- .end = IRQ_SSP1_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource ssp2_resources[] = {
- {
- .start = REGS_SSP2_PHYS,
- .end = REGS_SSP2_PHYS + REGS_SSP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_SSP2_DMA,
- .end = IRQ_SSP2_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device stmp3xxx_spi1 = {
- .name = "stmp3xxx_ssp",
- .id = 1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssp1_resources,
- .num_resources = ARRAY_SIZE(ssp1_resources),
-};
-
-struct platform_device stmp3xxx_spi2 = {
- .name = "stmp3xxx_ssp",
- .id = 2,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssp2_resources,
- .num_resources = ARRAY_SIZE(ssp2_resources),
-};
-
-static struct resource fb_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LCDIF_DMA,
- .end = IRQ_LCDIF_DMA,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LCDIF_ERROR,
- .end = IRQ_LCDIF_ERROR,
- }, {
- .flags = IORESOURCE_MEM,
- .start = REGS_LCDIF_PHYS,
- .end = REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
- },
-};
-
-struct platform_device stmp3xxx_framebuffer = {
- .name = "stmp3xxx-fb",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(fb_resource),
- .resource = fb_resource,
-};
-
-#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2) \
- static char *cmdline_device_##name; \
- static int cmdline_device_##name##_setup(char *dev) \
- { \
- cmdline_device_##name = dev + 1; \
- return 0; \
- } \
- __setup(#name, cmdline_device_##name##_setup); \
- int stmp3xxx_##name##_device_register(void) \
- { \
- struct platform_device *d = NULL; \
- if (!cmdline_device_##name || \
- !strcmp(cmdline_device_##name, #dev1)) \
- d = &stmp3xxx_##dev1; \
- else if (!strcmp(cmdline_device_##name, #dev2)) \
- d = &stmp3xxx_##dev2; \
- else \
- printk(KERN_ERR"Unknown %s assignment '%s'.\n", \
- #name, cmdline_device_##name); \
- return d ? platform_device_register(d) : -ENOENT; \
- }
-
-CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
-CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
-
-struct platform_device stmp3xxx_backlight = {
- .name = "stmp3xxx-bl",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_rotdec = {
- .name = "stmp3xxx-rotdec",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_persistent = {
- .name = "stmp3xxx-persistent",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_dcp_bootstream = {
- .name = "stmp3xxx-dcpboot",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dcp_resources[] = {
- {
- .start = IRQ_DCP_VMI,
- .end = IRQ_DCP_VMI,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_DCP,
- .end = IRQ_DCP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_dcp = {
- .name = "stmp3xxx-dcp",
- .id = -1,
- .resource = dcp_resources,
- .num_resources = ARRAY_SIZE(dcp_resources),
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource battery_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_VDD5V,
- .end = IRQ_VDD5V,
- },
-};
-
-struct platform_device stmp3xxx_battery = {
- .name = "stmp3xxx-battery",
- .resource = battery_resource,
- .num_resources = ARRAY_SIZE(battery_resource),
-};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
deleted file mode 100644
index b4dcf8c0477..00000000000
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * DMA helper routines for Freescale STMP37XX/STMP378X
- *
- * Author: dmitry pervushin <dpervushin@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/dmapool.h>
-#include <linux/sysdev.h>
-#include <linux/cpufreq.h>
-
-#include <asm/page.h>
-
-#include <mach/platform.h>
-#include <mach/dma.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-apbh.h>
-
-static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
-static const size_t pool_alignment = 8;
-static struct stmp3xxx_dma_user {
- void *pool;
- int inuse;
- const char *name;
-} channels[MAX_DMA_CHANNELS];
-
-#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
-#define IS_USED(ch) (channels[ch].inuse)
-
-int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
-{
- struct stmp3xxx_dma_user *user;
- int err = 0;
-
- user = channels + ch;
- if (!IS_VALID_CHANNEL(ch)) {
- err = -ENODEV;
- goto out;
- }
- if (IS_USED(ch)) {
- err = -EBUSY;
- goto out;
- }
- /* Create a pool to allocate dma commands from */
- user->pool = dma_pool_create(name, dev, pool_item_size,
- pool_alignment, PAGE_SIZE);
- if (user->pool == NULL) {
- err = -ENOMEM;
- goto out;
- }
- user->name = name;
- user->inuse++;
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_request);
-
-int stmp3xxx_dma_release(int ch)
-{
- struct stmp3xxx_dma_user *user = channels + ch;
- int err = 0;
-
- if (!IS_VALID_CHANNEL(ch)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(ch)) {
- err = -EBUSY;
- goto out;
- }
- BUG_ON(user->pool == NULL);
- dma_pool_destroy(user->pool);
- user->inuse--;
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_release);
-
-int stmp3xxx_dma_read_semaphore(int channel)
-{
- int sem = -1;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
- STMP3XXX_DMA_CHANNEL(channel) * 0x70);
- sem &= BM_APBH_CHn_SEMA_PHORE;
- sem >>= BP_APBH_CHn_SEMA_PHORE;
- break;
-
- case STMP3XXX_BUS_APBX:
- sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
- STMP3XXX_DMA_CHANNEL(channel) * 0x70);
- sem &= BM_APBX_CHn_SEMA_PHORE;
- sem >>= BP_APBX_CHn_SEMA_PHORE;
- break;
- default:
- BUG();
- }
- return sem;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
-
-int stmp3xxx_dma_allocate_command(int channel,
- struct stmp3xxx_dma_descriptor *descriptor)
-{
- struct stmp3xxx_dma_user *user = channels + channel;
- int err = 0;
-
- if (!IS_VALID_CHANNEL(channel)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(channel)) {
- err = -EBUSY;
- goto out;
- }
- if (descriptor == NULL) {
- err = -EINVAL;
- goto out;
- }
-
- /* Allocate memory for a command from the buffer */
- descriptor->command =
- dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
-
- /* Check it worked */
- if (!descriptor->command) {
- err = -ENOMEM;
- goto out;
- }
-
- memset(descriptor->command, 0, pool_item_size);
-out:
- WARN_ON(err);
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
-
-int stmp3xxx_dma_free_command(int channel,
- struct stmp3xxx_dma_descriptor *descriptor)
-{
- int err = 0;
-
- if (!IS_VALID_CHANNEL(channel)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(channel)) {
- err = -EBUSY;
- goto out;
- }
-
- /* Return the command memory to the pool */
- dma_pool_free(channels[channel].pool, descriptor->command,
- descriptor->handle);
-
- /* Initialise descriptor so we're not tempted to use it */
- descriptor->command = NULL;
- descriptor->handle = 0;
- descriptor->virtual_buf_ptr = NULL;
- descriptor->next_descr = NULL;
-
- WARN_ON(err);
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_free_command);
-
-void stmp3xxx_dma_go(int channel,
- struct stmp3xxx_dma_descriptor *head, u32 semaphore)
-{
- int ch = STMP3XXX_DMA_CHANNEL(channel);
- void __iomem *c, *s;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
- s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
- break;
-
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
- s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
- break;
-
- default:
- return;
- }
-
- /* Set next command */
- __raw_writel(head->handle, c);
- /* Set counting semaphore (kicks off transfer). Assumes
- peripheral has been set up correctly */
- __raw_writel(semaphore, s);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_go);
-
-int stmp3xxx_dma_running(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
- 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
- BM_APBH_CHn_SEMA_PHORE;
-
- case STMP3XXX_BUS_APBX:
- return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
- 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
- BM_APBX_CHn_SEMA_PHORE;
- default:
- BUG();
- return 0;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_dma_running);
-
-/*
- * Circular dma chain management
- */
-void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
-{
- int i;
-
- for (i = 0; i < chain->total_count; i++)
- stmp3xxx_dma_free_command(
- STMP3XXX_DMA(chain->channel, chain->bus),
- &chain->chain[i]);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
-
-int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
- struct stmp3xxx_dma_descriptor descriptors[],
- unsigned items)
-{
- int i;
- int err = 0;
-
- if (items == 0)
- return err;
-
- for (i = 0; i < items; i++) {
- err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
- if (err) {
- WARN_ON(err);
- /*
- * Couldn't allocate the whole chain.
- * deallocate what has been allocated
- */
- if (i) {
- do {
- stmp3xxx_dma_free_command(ch,
- &descriptors
- [i]);
- } while (i-- > 0);
- }
- return err;
- }
-
- /* link them! */
- if (i > 0) {
- descriptors[i - 1].next_descr = &descriptors[i];
- descriptors[i - 1].command->next =
- descriptors[i].handle;
- }
- }
-
- /* make list circular */
- descriptors[items - 1].next_descr = &descriptors[0];
- descriptors[items - 1].command->next = descriptors[0].handle;
-
- chain->total_count = items;
- chain->chain = descriptors;
- chain->free_index = 0;
- chain->active_index = 0;
- chain->cooked_index = 0;
- chain->free_count = items;
- chain->active_count = 0;
- chain->cooked_count = 0;
- chain->bus = STMP3XXX_DMA_BUS(ch);
- chain->channel = STMP3XXX_DMA_CHANNEL(ch);
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
-
-void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
-{
- BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
- chain->free_index = 0;
- chain->active_index = 0;
- chain->cooked_index = 0;
- chain->free_count = chain->total_count;
- chain->active_count = 0;
- chain->cooked_count = 0;
-}
-EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
-
-void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
- unsigned count)
-{
- BUG_ON(chain->cooked_count < count);
-
- chain->cooked_count -= count;
- chain->cooked_index += count;
- chain->cooked_index %= chain->total_count;
- chain->free_count += count;
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_free);
-
-void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
- unsigned count)
-{
- void __iomem *c;
- u32 mask_clr, mask;
- BUG_ON(chain->free_count < count);
-
- chain->free_count -= count;
- chain->free_index += count;
- chain->free_index %= chain->total_count;
- chain->active_count += count;
-
- switch (chain->bus) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
- mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
- mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
- break;
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
- mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
- mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
- break;
- default:
- BUG();
- return;
- }
-
- /* Set counting semaphore (kicks off transfer). Assumes
- peripheral has been set up correctly */
- stmp3xxx_clearl(mask_clr, c);
- stmp3xxx_setl(mask, c);
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_active);
-
-unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
-{
- unsigned cooked;
-
- cooked = chain->active_count -
- stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
-
- chain->active_count -= cooked;
- chain->active_index += cooked;
- chain->active_index %= chain->total_count;
-
- chain->cooked_count += cooked;
-
- return cooked;
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
-
-void stmp3xxx_dma_set_alt_target(int channel, int function)
-{
-#if defined(CONFIG_ARCH_STMP37XX)
- unsigned bits = 4;
-#elif defined(CONFIG_ARCH_STMP378X)
- unsigned bits = 2;
-#else
-#error wrong arch
-#endif
- int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
- unsigned mask = (1<<bits) - 1;
- void __iomem *c;
-
- BUG_ON(function < 0 || function >= (1<<bits));
- pr_debug("%s: channel = %d, using mask %x, "
- "shift = %d\n", __func__, channel, mask, shift);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_DEVSEL;
- break;
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_DEVSEL;
- break;
- default:
- BUG();
- }
- stmp3xxx_clearl(mask << shift, c);
- stmp3xxx_setl(mask << shift, c);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
-
-void stmp3xxx_dma_suspend(void)
-{
- stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
-}
-
-void stmp3xxx_dma_resume(void)
-{
- stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
- REGS_APBX_BASE + HW_APBX_CTRL0);
-}
-
-#ifdef CONFIG_CPU_FREQ
-
-struct dma_notifier_block {
- struct notifier_block nb;
- void *data;
-};
-
-static int dma_cpufreq_notifier(struct notifier_block *self,
- unsigned long phase, void *p)
-{
- switch (phase) {
- case CPUFREQ_POSTCHANGE:
- stmp3xxx_dma_resume();
- break;
-
- case CPUFREQ_PRECHANGE:
- stmp3xxx_dma_suspend();
- break;
-
- default:
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static struct dma_notifier_block dma_cpufreq_nb = {
- .nb = {
- .notifier_call = dma_cpufreq_notifier,
- },
-};
-#endif /* CONFIG_CPU_FREQ */
-
-void __init stmp3xxx_dma_init(void)
-{
- stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
- REGS_APBX_BASE + HW_APBX_CTRL0);
-#ifdef CONFIG_CPU_FREQ
- cpufreq_register_notifier(&dma_cpufreq_nb.nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-#endif /* CONFIG_CPU_FREQ */
-}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
deleted file mode 100644
index f9c39772d7c..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
deleted file mode 100644
index b4e205b95f2..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/cputype.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X CPU type detection
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_CPU_H
-#define __ASM_PLAT_CPU_H
-
-#ifdef CONFIG_ARCH_STMP37XX
-#define cpu_is_stmp37xx() (1)
-#else
-#define cpu_is_stmp37xx() (0)
-#endif
-
-#ifdef CONFIG_ARCH_STMP378X
-#define cpu_is_stmp378x() (1)
-#else
-#define cpu_is_stmp378x() (0)
-#endif
-
-#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
deleted file mode 100644
index d3a0985c968..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Debugging macro include header
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro addruart, rp, rv
- mov \rp, #0x00070000
- add \rv, \rp, #0xf0000000 @ virtual base
- add \rp, \rp, #0x80000000 @ physical base
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0] @ data register at 0
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
deleted file mode 100644
index 7c58557c676..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/dma.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X DMA helper interface
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_STMP3XXX_DMA_H
-#define __ASM_PLAT_STMP3XXX_DMA_H
-
-#include <linux/platform_device.h>
-#include <linux/dmapool.h>
-
-#if !defined(MAX_PIO_WORDS)
-#define MAX_PIO_WORDS (15)
-#endif
-
-#define STMP3XXX_BUS_APBH 0
-#define STMP3XXX_BUS_APBX 1
-#define STMP3XXX_DMA_MAX_CHANNEL 16
-#define STMP3XXX_DMA_BUS(dma) ((dma) / 16)
-#define STMP3XXX_DMA_CHANNEL(dma) ((dma) % 16)
-#define STMP3XXX_DMA(channel, bus) ((bus) * 16 + (channel))
-#define MAX_DMA_ADDRESS 0xffffffff
-#define MAX_DMA_CHANNELS 32
-
-struct stmp3xxx_dma_command {
- u32 next;
- u32 cmd;
- union {
- u32 buf_ptr;
- u32 alternate;
- };
- u32 pio_words[MAX_PIO_WORDS];
-};
-
-struct stmp3xxx_dma_descriptor {
- struct stmp3xxx_dma_command *command;
- dma_addr_t handle;
-
- /* The virtual address of the buffer pointer */
- void *virtual_buf_ptr;
- /* The next descriptor in a the DMA chain (optional) */
- struct stmp3xxx_dma_descriptor *next_descr;
-};
-
-struct stmp37xx_circ_dma_chain {
- unsigned total_count;
- struct stmp3xxx_dma_descriptor *chain;
-
- unsigned free_index;
- unsigned free_count;
- unsigned active_index;
- unsigned active_count;
- unsigned cooked_index;
- unsigned cooked_count;
-
- int bus;
- unsigned channel;
-};
-
-static inline struct stmp3xxx_dma_descriptor
- *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
-{
- return &(chain->chain[chain->free_index]);
-}
-
-static inline struct stmp3xxx_dma_descriptor
- *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
-{
- return &(chain->chain[chain->cooked_index]);
-}
-
-int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
-int stmp3xxx_dma_release(int ch);
-int stmp3xxx_dma_allocate_command(int ch,
- struct stmp3xxx_dma_descriptor *descriptor);
-int stmp3xxx_dma_free_command(int ch,
- struct stmp3xxx_dma_descriptor *descriptor);
-void stmp3xxx_dma_continue(int channel, u32 semaphore);
-void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
- u32 semaphore);
-int stmp3xxx_dma_running(int ch);
-int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
- struct stmp3xxx_dma_descriptor descriptors[],
- unsigned items);
-void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
-void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
-void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
- unsigned count);
-void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
- unsigned count);
-unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
-int stmp3xxx_dma_read_semaphore(int ch);
-void stmp3xxx_dma_init(void);
-void stmp3xxx_dma_set_alt_target(int ch, int target);
-void stmp3xxx_dma_suspend(void);
-void stmp3xxx_dma_resume(void);
-
-/*
- * STMP37xx and STMP378x have different DMA control
- * registers layout
- */
-
-void stmp3xxx_arch_dma_freeze(int ch);
-void stmp3xxx_arch_dma_unfreeze(int ch);
-void stmp3xxx_arch_dma_reset_channel(int ch);
-void stmp3xxx_arch_dma_enable_interrupt(int ch);
-void stmp3xxx_arch_dma_clear_interrupt(int ch);
-int stmp3xxx_arch_dma_is_interrupt(int ch);
-
-static inline void stmp3xxx_dma_reset_channel(int ch)
-{
- stmp3xxx_arch_dma_reset_channel(ch);
-}
-
-
-static inline void stmp3xxx_dma_freeze(int ch)
-{
- stmp3xxx_arch_dma_freeze(ch);
-}
-
-static inline void stmp3xxx_dma_unfreeze(int ch)
-{
- stmp3xxx_arch_dma_unfreeze(ch);
-}
-
-static inline void stmp3xxx_dma_enable_interrupt(int ch)
-{
- stmp3xxx_arch_dma_enable_interrupt(ch);
-}
-
-static inline void stmp3xxx_dma_clear_interrupt(int ch)
-{
- stmp3xxx_arch_dma_clear_interrupt(ch);
-}
-
-static inline int stmp3xxx_dma_is_interrupt(int ch)
-{
- return stmp3xxx_arch_dma_is_interrupt(ch);
-}
-
-#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
deleted file mode 100644
index a8b57925617..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X GPIO interface
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-
-#define ARCH_NR_GPIOS (32 * 3)
-#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
-#define gpio_get_value(gpio) __gpio_get_value(gpio)
-#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
deleted file mode 100644
index e166432910a..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __MACH_GPMI_H
-
-#include <linux/mtd/partitions.h>
-#include <mach/regs-gpmi.h>
-
-struct gpmi_platform_data {
- void *pins;
- int nr_parts;
- struct mtd_partition *parts;
- const char *part_types[];
-};
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
deleted file mode 100644
index 47b8978405b..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file contains the hardware definitions of the Freescale STMP3XXX
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE 0xF0000000 /* VA of IO */
-#define IO_SIZE 0x00100000 /* How much? */
-#define IO_START 0x80000000 /* PA of IO */
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
deleted file mode 100644
index d08b1b7f3d1..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/io.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-#define __mem_isa(a) (a)
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
deleted file mode 100644
index 61fa54882e1..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
deleted file mode 100644
index ba81e154376..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/mmc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _MACH_MMC_H
-#define _MACH_MMC_H
-
-#include <mach/regs-ssp.h>
-
-struct stmp3xxxmmc_platform_data {
- int (*get_wp)(void);
- unsigned long (*setclock)(void __iomem *base, unsigned long);
- void (*cmd_pullup)(int);
- int (*hw_init)(void);
- void (*hw_release)(void);
-};
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
deleted file mode 100644
index cc5af82279a..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X Pin Multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __PINMUX_H
-#define __PINMUX_H
-
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <asm-generic/gpio.h>
-
-/* Pin definitions */
-#include "pins.h"
-#include <mach/pins.h>
-
-/*
- * Each pin may be routed up to four different HW interfaces
- * including GPIO
- */
-enum pin_fun {
- PIN_FUN1 = 0,
- PIN_FUN2,
- PIN_FUN3,
- PIN_GPIO,
-};
-
-/*
- * Each pin may have different output drive strength in range from
- * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
- */
-enum pin_strength {
- PIN_4MA = 0,
- PIN_8MA,
- PIN_12MA,
- PIN_16MA,
- PIN_20MA,
-};
-
-/*
- * Each pin can be programmed for 1.8V or 3.3V
- */
-enum pin_voltage {
- PIN_1_8V = 0,
- PIN_3_3V,
-};
-
-/*
- * Structure to define a group of pins and their parameters
- */
-struct pin_desc {
- unsigned id;
- enum pin_fun fun;
- enum pin_strength strength;
- enum pin_voltage voltage;
- unsigned pullup:1;
-};
-
-struct pin_group {
- struct pin_desc *pins;
- int nr_pins;
-};
-
-/* Set pin drive strength */
-void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
- const char *label);
-
-/* Set pin voltage */
-void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
- const char *label);
-
-/* Enable pull-up resistor for a pin */
-void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
-
-/*
- * Request a pin ownership, only one module (identified by @label)
- * may own a pin.
- */
-int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
-
-/* Release pin */
-void stmp3xxx_release_pin(unsigned id, const char *label);
-
-void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
-
-/*
- * Each bank is associated with a number of registers to control
- * pin function, drive strength, voltage and pull-up reigster. The
- * number of registers of a given type depends on the number of bits
- * describin particular pin.
- */
-#define HW_MUXSEL_NUM 2 /* registers per bank */
-#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */
-#define HW_MUXSEL_PIN_NUM 16 /* pins per register */
-#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */
-#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */
-
-#define HW_DRIVE_NUM 4 /* registers per bank */
-#define HW_DRIVE_PIN_LEN 4 /* bits per pin */
-#define HW_DRIVE_PIN_NUM 8 /* pins per register */
-#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */
-#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */
-#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */
-
-
-struct stmp3xxx_pinmux_bank {
- struct gpio_chip chip;
-
- /* Pins allocation map */
- unsigned long pin_map;
-
- /* Pin owner names */
- const char *pin_labels[32];
-
- /* Bank registers */
- void __iomem *hw_muxsel[HW_MUXSEL_NUM];
- void __iomem *hw_drive[HW_DRIVE_NUM];
- void __iomem *hw_pull;
-
- void __iomem *pin2irq,
- *irqlevel,
- *irqpolarity,
- *irqen,
- *irqstat;
-
- /* HW MUXSEL register function bit values */
- u8 functions[HW_MUXSEL_PINFUN_NUM];
-
- /*
- * HW DRIVE register strength bit values:
- * 0xff - requested strength is not supported for this bank
- */
- u8 strengths[HW_DRIVE_PINDRV_NUM];
-
- /* GPIO things */
- void __iomem *hw_gpio_in,
- *hw_gpio_out,
- *hw_gpio_doe;
- int irq, virq;
-};
-
-int __init stmp3xxx_pinmux_init(int virtual_irq_start);
-
-#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
deleted file mode 100644
index c573318e1ca..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/pins.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_PINS_H
-#define __ASM_PLAT_PINS_H
-
-#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin)
-#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32)
-#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32)
-
-/*
- * Special invalid pin identificator to show a pin doesn't exist
- */
-#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF)
-
-#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
deleted file mode 100644
index 7007ddaa91e..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/platform.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_PLATFORM_H
-#define __ASM_PLAT_PLATFORM_H
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/sizes.h>
-
-/* Virtual address where registers are mapped */
-#define STMP3XXX_REGS_PHBASE 0x80000000
-#ifdef __ASSEMBLER__
-#define STMP3XXX_REGS_BASE 0xF0000000
-#else
-#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000
-#endif
-#define STMP3XXX_REGS_SIZE SZ_1M
-
-/* Virtual address where OCRAM is mapped */
-#define STMP3XXX_OCRAM_PHBASE 0x00000000
-#ifdef __ASSEMBLER__
-#define STMP3XXX_OCRAM_BASE 0xf1000000
-#else
-#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000
-#endif
-#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K)
-
-#ifdef CONFIG_ARCH_STMP37XX
-#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD
-#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR
-#endif
-
-#ifdef CONFIG_ARCH_STMP378X
-#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD
-#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR
-#endif
-
-#define HW_STMP3XXX_SET 0x04
-#define HW_STMP3XXX_CLR 0x08
-#define HW_STMP3XXX_TOG 0x0c
-
-#ifndef __ASSEMBLER__
-static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
-{
- __raw_writel(v, r + HW_STMP3XXX_CLR);
-}
-
-static inline void stmp3xxx_setl(u32 v, void __iomem *r)
-{
- __raw_writel(v, r + HW_STMP3XXX_SET);
-}
-#endif
-
-#define BF(value, field) (((value) << BP_##field) & BM_##field)
-
-#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
deleted file mode 100644
index 2e300feaa4c..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X core structure and function declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_STMP3XXX_H
-#define __ASM_PLAT_STMP3XXX_H
-
-#include <linux/irq.h>
-
-extern struct sys_timer stmp3xxx_timer;
-
-void stmp3xxx_init_irq(struct irq_chip *chip);
-void stmp3xxx_init(void);
-int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
-extern struct platform_device stmp3xxx_dbguart,
- stmp3xxx_appuart,
- stmp3xxx_watchdog,
- stmp3xxx_touchscreen,
- stmp3xxx_keyboard,
- stmp3xxx_gpmi,
- stmp3xxx_mmc,
- stmp3xxx_udc,
- stmp3xxx_ehci,
- stmp3xxx_rtc,
- stmp3xxx_spi1,
- stmp3xxx_spi2,
- stmp3xxx_backlight,
- stmp3xxx_rotdec,
- stmp3xxx_dcp,
- stmp3xxx_dcp_bootstream,
- stmp3xxx_persistent,
- stmp3xxx_framebuffer,
- stmp3xxx_battery;
-int stmp3xxx_ssp1_device_register(void);
-int stmp3xxx_ssp2_device_register(void);
-
-struct pin_group;
-void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
-int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
-
-#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
deleted file mode 100644
index 28a98888931..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <mach/platform.h>
-#include <mach/regs-clkctrl.h>
-#include <mach/regs-power.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
-
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* Set BATTCHRG to default value */
- __raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
-
- /* Set MINPWR to default value */
- __raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
-
- /* Reset digital side of chip (but not power or RTC) */
- __raw_writel(BM_CLKCTRL_RESET_DIG,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
-
- /* Should not return */
-}
-
-#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
deleted file mode 100644
index 3373985d7a8..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * System time clock is sourced from the 32k clock
- */
-#define CLOCK_TICK_RATE (32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
deleted file mode 100644
index f79f5ee56cd..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-/*
- * Register includes are for when the MMU enabled; we need to define our
- * own stuff here for pre-MMU use
- */
-#define UARTDBG_BASE 0x80070000
-#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c])
-
-/*
- * This does not append a newline
- */
-static void putc(char c)
-{
- /* Wait for TX fifo empty */
- while ((UART(6) & (1<<7)) == 0)
- continue;
-
- /* Write byte */
- UART(0) = c;
-
- /* Wait for last bit to exit the UART */
- while (UART(6) & (1<<3))
- continue;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
deleted file mode 100644
index 943c1a29d64..00000000000
--- a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
deleted file mode 100644
index 6fdf9acf82e..00000000000
--- a/arch/arm/plat-stmp3xxx/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Freescale STMP37XX/STMP378X common interrupt handling code
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/regs-icoll.h>
-
-void __init stmp3xxx_init_irq(struct irq_chip *chip)
-{
- unsigned int i, lv;
-
- /* Reset the interrupt controller */
- stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
-
- /* Disable all interrupts initially */
- for (i = 0; i < NR_REAL_IRQS; i++) {
- chip->irq_mask(irq_get_irq_data(i));
- irq_set_chip_and_handler(i, chip, handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Ensure vector is cleared */
- for (lv = 0; lv < 4; lv++)
- __raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
- __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
deleted file mode 100644
index 3def03b3217..00000000000
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * Freescale STMP378X/STMP378X Pin Multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define DEBUG
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysdev.h>
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/regs-pinctrl.h>
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-
-#define NR_BANKS ARRAY_SIZE(pinmux_banks)
-static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
- [0] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
- .irq = IRQ_GPIO0,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
- },
- [1] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
- .irq = IRQ_GPIO1,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
- },
- [2] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
- .irq = IRQ_GPIO2,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
- },
- [3] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
- NULL,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
- .functions = {0x0, 0x1, 0x2, 0x3},
- .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
- },
-};
-
-static inline struct stmp3xxx_pinmux_bank *
-stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
-{
- unsigned b, p;
-
- b = STMP3XXX_PINID_TO_BANK(id);
- p = STMP3XXX_PINID_TO_PINNUM(id);
- BUG_ON(b >= NR_BANKS);
- if (bank)
- *bank = b;
- if (pin)
- *pin = p;
- return &pinmux_banks[b];
-}
-
-/* Check if requested pin is owned by caller */
-static int stmp3xxx_check_pin(unsigned id, const char *label)
-{
- unsigned pin;
- struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
-
- if (!test_bit(pin, &pm->pin_map)) {
- printk(KERN_WARNING
- "%s: Accessing free pin %x, caller %s\n",
- __func__, id, label);
-
- return -EINVAL;
- }
-
- if (label && pm->pin_labels[pin] &&
- strcmp(label, pm->pin_labels[pin])) {
- printk(KERN_WARNING
- "%s: Wrong pin owner %x, caller %s owner %s\n",
- __func__, id, label, pm->pin_labels[pin]);
-
- return -EINVAL;
- }
- return 0;
-}
-
-void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
- const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwdrive;
- u32 shift, val;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
- bank, pin, strength);
-
- hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
- shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
- val = pbank->strengths[strength];
- if (val == 0xff) {
- printk(KERN_WARNING
- "%s: strength is not supported for bank %d, caller %s",
- __func__, bank, label);
- return;
- }
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
- val << shift, hwdrive);
- stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
- stmp3xxx_setl(val << shift, hwdrive);
-}
-
-void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
- const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwdrive;
- u32 shift;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
- bank, pin, voltage);
-
- hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
- shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: changing 0x%x bit in 0x%p register\n",
- __func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
- if (voltage == PIN_1_8V)
- stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
- else
- stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
-}
-
-void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwpull;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
- bank, pin, enable);
-
- hwpull = pbank->hw_pull;
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: changing 0x%x bit in 0x%p register\n",
- __func__, 1 << pin, hwpull);
- if (enable)
- stmp3xxx_setl(1 << pin, hwpull);
- else
- stmp3xxx_clearl(1 << pin, hwpull);
-}
-
-int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- u32 bank, pin;
- int ret = 0;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
- bank, pin, fun);
-
- if (test_bit(pin, &pbank->pin_map)) {
- printk(KERN_WARNING
- "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
- __func__, bank, pin, label, pbank->pin_labels[pin]);
- return -EBUSY;
- }
-
- set_bit(pin, &pbank->pin_map);
- pbank->pin_labels[pin] = label;
-
- stmp3xxx_set_pin_type(id, fun);
-
- return ret;
-}
-
-void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwmux;
- u32 shift, val;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
-
- hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
- shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
-
- val = pbank->functions[fun];
- shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
- pr_debug("%s: writing 0x%x to 0x%p register\n",
- __func__, val << shift, hwmux);
- stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
- stmp3xxx_setl(val << shift, hwmux);
-}
-
-void stmp3xxx_release_pin(unsigned id, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- clear_bit(pin, &pbank->pin_map);
- pbank->pin_labels[pin] = NULL;
-}
-
-int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
-{
- struct pin_desc *pin;
- int p;
- int err = 0;
-
- /* Allocate and configure pins */
- for (p = 0; p < pin_group->nr_pins; p++) {
- pr_debug("%s: #%d\n", __func__, p);
- pin = &pin_group->pins[p];
-
- err = stmp3xxx_request_pin(pin->id, pin->fun, label);
- if (err)
- goto out_err;
-
- stmp3xxx_pin_strength(pin->id, pin->strength, label);
- stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
- stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
- }
-
- return 0;
-
-out_err:
- /* Release allocated pins in case of error */
- while (--p >= 0) {
- pr_debug("%s: releasing #%d\n", __func__, p);
- stmp3xxx_release_pin(pin_group->pins[p].id, label);
- }
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_request_pin_group);
-
-void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
-{
- struct pin_desc *pin;
- int p;
-
- for (p = 0; p < pin_group->nr_pins; p++) {
- pin = &pin_group->pins[p];
- stmp3xxx_release_pin(pin->id, label);
- }
-}
-EXPORT_SYMBOL(stmp3xxx_release_pin_group);
-
-static int stmp3xxx_irq_data_to_gpio(struct irq_data *d,
- struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
-{
- struct stmp3xxx_pinmux_bank *pm;
-
- for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
- if (pm->virq <= d->irq && d->irq < pm->virq + 32) {
- *bank = pm;
- *gpio = d->irq - pm->virq;
- return 0;
- }
- return -ENOENT;
-}
-
-static int stmp3xxx_set_irqtype(struct irq_data *d, unsigned type)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
- int l, p;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- l = 0; p = 1; break;
- case IRQ_TYPE_EDGE_FALLING:
- l = 0; p = 0; break;
- case IRQ_TYPE_LEVEL_HIGH:
- l = 1; p = 1; break;
- case IRQ_TYPE_LEVEL_LOW:
- l = 1; p = 0; break;
- default:
- pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
- __func__, type);
- return -ENXIO;
- }
-
- if (l)
- stmp3xxx_setl(1 << gpio, pm->irqlevel);
- else
- stmp3xxx_clearl(1 << gpio, pm->irqlevel);
- if (p)
- stmp3xxx_setl(1 << gpio, pm->irqpolarity);
- else
- stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
- return 0;
-}
-
-static void stmp3xxx_pin_ack_irq(struct irq_data *d)
-{
- u32 stat;
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stat = __raw_readl(pm->irqstat) & (1 << gpio);
- stmp3xxx_clearl(stat, pm->irqstat);
-}
-
-static void stmp3xxx_pin_mask_irq(struct irq_data *d)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stmp3xxx_clearl(1 << gpio, pm->irqen);
- stmp3xxx_clearl(1 << gpio, pm->pin2irq);
-}
-
-static void stmp3xxx_pin_unmask_irq(struct irq_data *d)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stmp3xxx_setl(1 << gpio, pm->irqen);
- stmp3xxx_setl(1 << gpio, pm->pin2irq);
-}
-
-static inline
-struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
-{
- return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
-}
-
-static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
- return pm->virq + offset;
-}
-
-static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
- unsigned v;
-
- v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
- return v ? 1 : 0;
-}
-
-static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- if (v)
- stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
- else
- stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
-}
-
-static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
- stmp3xxx_gpio_set(chip, offset, v);
- return 0;
-}
-
-static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
- return 0;
-}
-
-static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
-}
-
-static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- stmp3xxx_release_pin(chip->base + offset, "gpio");
-}
-
-static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
-{
- struct stmp3xxx_pinmux_bank *pm = irq_get_handler_data(irq);
- int gpio_irq = pm->virq;
- u32 stat = __raw_readl(pm->irqstat);
-
- while (stat) {
- if (stat & 1)
- generic_handle_irq(gpio_irq);
- gpio_irq++;
- stat >>= 1;
- }
-}
-
-static struct irq_chip gpio_irq_chip = {
- .irq_ack = stmp3xxx_pin_ack_irq,
- .irq_mask = stmp3xxx_pin_mask_irq,
- .irq_unmask = stmp3xxx_pin_unmask_irq,
- .irq_set_type = stmp3xxx_set_irqtype,
-};
-
-int __init stmp3xxx_pinmux_init(int virtual_irq_start)
-{
- int b, r = 0;
- struct stmp3xxx_pinmux_bank *pm;
- int virq;
-
- for (b = 0; b < 3; b++) {
- /* only banks 0,1,2 are allowed to GPIO */
- pm = pinmux_banks + b;
- pm->chip.base = 32 * b;
- pm->chip.ngpio = 32;
- pm->chip.owner = THIS_MODULE;
- pm->chip.can_sleep = 1;
- pm->chip.exported = 1;
- pm->chip.to_irq = stmp3xxx_gpio_to_irq;
- pm->chip.direction_input = stmp3xxx_gpio_input;
- pm->chip.direction_output = stmp3xxx_gpio_output;
- pm->chip.get = stmp3xxx_gpio_get;
- pm->chip.set = stmp3xxx_gpio_set;
- pm->chip.request = stmp3xxx_gpio_request;
- pm->chip.free = stmp3xxx_gpio_free;
- pm->virq = virtual_irq_start + b * 32;
-
- for (virq = pm->virq; virq < pm->virq; virq++) {
- gpio_irq_chip.irq_mask(irq_get_irq_data(virq));
- irq_set_chip_and_handler(virq, &gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(virq, IRQF_VALID);
- }
- r = gpiochip_add(&pm->chip);
- if (r < 0)
- break;
- irq_set_chained_handler(pm->irq, stmp3xxx_gpio_irq);
- irq_set_handler_data(pm->irq, pm);
- }
- return r;
-}
-
-MODULE_AUTHOR("Vladislav Buzov");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
deleted file mode 100644
index c395630a6ed..00000000000
--- a/arch/arm/plat-stmp3xxx/timer.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * System timer for Freescale STMP37XX/STMP378X
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach/time.h>
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/regs-timrot.h>
-
-static irqreturn_t
-stmp3xxx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *c = dev_id;
-
- /* timer 0 */
- if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
- BM_TIMROT_TIMCTRLn_IRQ) {
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- c->event_handler(c);
- }
-
- /* timer 1 */
- else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
- & BM_TIMROT_TIMCTRLn_IRQ) {
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
- }
-
- return IRQ_HANDLED;
-}
-
-static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
-{
- return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
- & 0xFFFF0000) >> 16);
-}
-
-static int
-stmp3xxx_timrot_set_next_event(unsigned long delta,
- struct clock_event_device *dev)
-{
- /* reload the timer */
- __raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- return 0;
-}
-
-static void
-stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
- struct clock_event_device *dev)
-{
-}
-
-static struct clock_event_device ckevt_timrot = {
- .name = "timrot",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_next_event = stmp3xxx_timrot_set_next_event,
- .set_mode = stmp3xxx_timrot_set_mode,
-};
-
-static struct clocksource cksrc_stmp3xxx = {
- .name = "cksrc_stmp3xxx",
- .rating = 250,
- .read = stmp3xxx_clock_read,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static struct irqaction stmp3xxx_timer_irq = {
- .name = "stmp3xxx_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = stmp3xxx_timer_interrupt,
- .dev_id = &ckevt_timrot,
-};
-
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init stmp3xxx_init_timer(void)
-{
- ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
- ckevt_timrot.shift);
- ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
- ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
- ckevt_timrot.cpumask = cpumask_of(0);
-
- stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
-
- /* clear two timers */
- __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-
- /* configure them */
- __raw_writel(
- (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- __raw_writel(
- (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
-
- __raw_writel(CLOCK_TICK_RATE / HZ - 1,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-
- setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
-
- clocksource_register_hz(&cksrc_stmp3xxx, CLOCK_TICK_RATE);
- clockevents_register_device(&ckevt_timrot);
-}
-
-#ifdef CONFIG_PM
-
-void stmp3xxx_suspend_timer(void)
-{
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
- REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
-}
-
-void stmp3xxx_resume_timer(void)
-{
- stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
- REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
- __raw_writel(
- 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- __raw_writel(
- 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- __raw_writel(CLOCK_TICK_RATE / HZ - 1,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-}
-
-#else
-
-#define stmp3xxx_suspend_timer NULL
-#define stmp3xxx_resume_timer NULL
-
-#endif /* CONFIG_PM */
-
-struct sys_timer stmp3xxx_timer = {
- .init = stmp3xxx_init_timer,
- .suspend = stmp3xxx_suspend_timer,
- .resume = stmp3xxx_resume_timer,
-};
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index ba3d471d4bc..51ecfea09b2 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -16,6 +16,7 @@
#include <linux/smp.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
/*
* control for which core is the next to come out of the secondary
@@ -83,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index bbf3da012af..f25e7ec8941 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread)
put_cpu();
}
+static void vfp_thread_copy(struct thread_info *thread)
+{
+ struct thread_info *parent = current_thread_info();
+
+ vfp_sync_hwstate(parent);
+ thread->vfpstate = parent->vfpstate;
+}
+
/*
* When this function is called with the following 'cmd's, the following
* is true while this function is being run:
@@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread)
static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
struct thread_info *thread = v;
+ u32 fpexc;
+#ifdef CONFIG_SMP
+ unsigned int cpu;
+#endif
- if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
- u32 fpexc = fmrx(FPEXC);
+ switch (cmd) {
+ case THREAD_NOTIFY_SWITCH:
+ fpexc = fmrx(FPEXC);
#ifdef CONFIG_SMP
- unsigned int cpu = thread->cpu;
+ cpu = thread->cpu;
/*
* On SMP, if VFP is enabled, save the old state in
@@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
* old state.
*/
fmxr(FPEXC, fpexc & ~FPEXC_EN);
- return NOTIFY_DONE;
- }
+ break;
- if (cmd == THREAD_NOTIFY_FLUSH)
+ case THREAD_NOTIFY_FLUSH:
vfp_thread_flush(thread);
- else
+ break;
+
+ case THREAD_NOTIFY_EXIT:
vfp_thread_exit(thread);
+ break;
+
+ case THREAD_NOTIFY_COPY:
+ vfp_thread_copy(thread);
+ break;
+ }
return NOTIFY_DONE;
}
@@ -378,9 +398,9 @@ static void vfp_enable(void *unused)
}
#ifdef CONFIG_PM
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
-static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
u32 fpexc = fmrx(FPEXC);
@@ -400,34 +420,25 @@ static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
return 0;
}
-static int vfp_pm_resume(struct sys_device *dev)
+static void vfp_pm_resume(void)
{
/* ensure we have access to the vfp */
vfp_enable(NULL);
/* and disable it to ensure the next usage restores the state */
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-
- return 0;
}
-static struct sysdev_class vfp_pm_sysclass = {
- .name = "vfp",
+static struct syscore_ops vfp_pm_syscore_ops = {
.suspend = vfp_pm_suspend,
.resume = vfp_pm_resume,
};
-static struct sys_device vfp_pm_sysdev = {
- .cls = &vfp_pm_sysclass,
-};
-
static void vfp_pm_init(void)
{
- sysdev_class_register(&vfp_pm_sysclass);
- sysdev_register(&vfp_pm_sysdev);
+ register_syscore_ops(&vfp_pm_syscore_ops);
}
-
#else
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */