diff options
Diffstat (limited to 'arch/arm')
37 files changed, 1627 insertions, 524 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 92622eb5cc0..3f8718fc405 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -647,7 +647,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK @@ -656,6 +656,10 @@ config ARCH_S3C2410 BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). + Note, the S3C2416 and the S3C2450 are so close that they even share + the same SoC ID code. This means that there is no seperate machine + directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + config ARCH_S3C64XX bool "Samsung S3C64XX" select PLAT_SAMSUNG @@ -892,6 +896,7 @@ if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" +source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index eddcbba87c6..9505a70bfc0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -162,7 +162,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 08ac5f96c01..cf68136cc66 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -54,7 +54,7 @@ enum dma_ch { #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ -#ifndef CONFIG_CPU_S3C2443 +#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416) #define S3C_DMA_CHANNELS (4) #else #define S3C_DMA_CHANNELS (6) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 6c12c6312ad..11bb0f08fe6 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -115,6 +115,26 @@ #define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) #define IRQ_S3C2412_CF S3C2410_IRQSUB(14) + +#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) +#define IRQ_S3C2416_DMA S3C2410_IRQ(17) +#define IRQ_S3C2416_UART3 S3C2410_IRQ(18) +#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20) +#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21) + +#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15) +#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16) +#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17) +#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18) +#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19) +#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20) +#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21) +#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22) +#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23) +#define IRQ_S32416_WDT S3C2410_IRQSUB(27) +#define IRQ_S32416_AC97 S3C2410_IRQSUB(28) + + /* extra irqs for s3c2440 */ #define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ @@ -130,7 +150,10 @@ #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ +#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */ + #define IRQ_HSMMC0 IRQ_S3C2443_HSMMC +#define IRQ_HSMMC1 IRQ_S3C2416_HSMMC0 #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) @@ -152,7 +175,7 @@ #define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) -#ifdef CONFIG_CPU_S3C2443 +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2443_AC97+1) #else #define NR_IRQS (IRQ_S3C2440_AC97+1) @@ -164,6 +187,9 @@ #define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 #define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 +#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3 +#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2 + #ifdef CONFIG_CPU_S3C2440 #define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97 #else diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index b049e61460b..091c98a639d 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -63,9 +63,11 @@ #define S3C2440_PA_AC97 (0x5B000000) #define S3C2440_SZ_AC97 SZ_1M -/* S3C2443 High-speed SD/MMC */ +/* S3C2443/S3C2416 High-speed SD/MMC */ #define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2443_SZ_HSMMC (256) +#define S3C2416_PA_HSMMC0 (0x4AC00000) + +#define S3C2443_PA_FB (0x4C800000) /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) @@ -106,10 +108,12 @@ #define S3C24XX_PA_SDI S3C2410_PA_SDI #define S3C24XX_PA_NAND S3C2410_PA_NAND +#define S3C_PA_FB S3C2443_PA_FB #define S3C_PA_IIC S3C2410_PA_IIC #define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC +#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 #define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index 9a0d169be13..3415b60082d 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -161,4 +161,6 @@ #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ +#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28) + #endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h index 3c3853cd3cf..98fd4a05587 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h @@ -19,6 +19,42 @@ #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) #endif +#if defined(CONFIG_CPU_S3C2416) +#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) +#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) +#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) +#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) + +#define S3C2416_SELECT_DSC0 (0 << 30) +#define S3C2416_SELECT_DSC1 (1 << 30) +#define S3C2416_SELECT_DSC2 (2 << 30) +#define S3C2416_SELECT_DSC3 (3 << 30) + +#define S3C2416_DSC_GETSHIFT(x) (x & 30) + +#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) +#define S3C2416_DSC0_CF_5mA (0 << 28) +#define S3C2416_DSC0_CF_10mA (1 << 28) +#define S3C2416_DSC0_CF_15mA (2 << 28) +#define S3C2416_DSC0_CF_21mA (3 << 28) +#define S3C2416_DSC0_CF_MASK (3 << 28) + +#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) +#define S3C2416_DSC0_nRBE_5mA (0 << 26) +#define S3C2416_DSC0_nRBE_10mA (1 << 26) +#define S3C2416_DSC0_nRBE_15mA (2 << 26) +#define S3C2416_DSC0_nRBE_21mA (3 << 26) +#define S3C2416_DSC0_nRBE_MASK (3 << 26) + +#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) +#define S3C2416_DSC0_nROE_5mA (0 << 24) +#define S3C2416_DSC0_nROE_10mA (1 << 24) +#define S3C2416_DSC0_nROE_15mA (2 << 24) +#define S3C2416_DSC0_nROE_21mA (3 << 24) +#define S3C2416_DSC0_nROE_MASK (3 << 24) + +#endif + #if defined(CONFIG_CPU_S3C244X) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 95e29fefec3..a0a89d42929 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -592,29 +592,50 @@ #define S3C2410_GPHUP S3C2410_GPIOREG(0x78) #define S3C2410_GPH0_nCTS0 (0x02 << 0) +#define S3C2416_GPH0_TXD0 (0x02 << 0) #define S3C2410_GPH1_nRTS0 (0x02 << 2) +#define S3C2416_GPH1_RXD0 (0x02 << 2) #define S3C2410_GPH2_TXD0 (0x02 << 4) +#define S3C2416_GPH2_TXD1 (0x02 << 4) #define S3C2410_GPH3_RXD0 (0x02 << 6) +#define S3C2416_GPH3_RXD1 (0x02 << 6) #define S3C2410_GPH4_TXD1 (0x02 << 8) +#define S3C2416_GPH4_TXD2 (0x02 << 8) #define S3C2410_GPH5_RXD1 (0x02 << 10) +#define S3C2416_GPH5_RXD2 (0x02 << 10) #define S3C2410_GPH6_TXD2 (0x02 << 12) +#define S3C2416_GPH6_TXD3 (0x02 << 12) #define S3C2410_GPH6_nRTS1 (0x03 << 12) +#define S3C2416_GPH6_nRTS2 (0x03 << 12) #define S3C2410_GPH7_RXD2 (0x02 << 14) +#define S3C2416_GPH7_RXD3 (0x02 << 14) #define S3C2410_GPH7_nCTS1 (0x03 << 14) +#define S3C2416_GPH7_nCTS2 (0x03 << 14) #define S3C2410_GPH8_UCLK (0x02 << 16) +#define S3C2416_GPH8_nCTS0 (0x02 << 16) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) #define S3C2442_GPH9_nSPICS0 (0x03 << 18) +#define S3C2416_GPH9_nRTS0 (0x02 << 18) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) +#define S3C2416_GPH10_nCTS1 (0x02 << 20) + +#define S3C2416_GPH11_nRTS1 (0x02 << 22) + +#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24) + +#define S3C2416_GPH13_CLKOUT0 (0x02 << 26) + +#define S3C2416_GPH14_CLKOUT1 (0x02 << 28) /* The S3C2412 and S3C2413 move the GPJ register set to after * GPH, which means all registers after 0x80 are now offset by 0x10 @@ -685,6 +706,7 @@ #define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) #define S3C2410_MISCCR_USBSUSPND0 (1<<12) +#define S3C2416_MISCCR_SEL_SUSPND (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) #define S3C2410_MISCCR_nRSTCON (1<<16) @@ -694,6 +716,9 @@ #define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ #define S3C2410_MISCCR_SDSLEEP (7<<17) +#define S3C2416_MISCCR_FLT_I2C (1<<24) +#define S3C2416_MISCCR_HSSPI_EN2 (1<<31) + /* external interrupt control... */ /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 @@ -761,8 +786,11 @@ #define S3C2410_GSTATUS1_IDMASK (0xffff0000) #define S3C2410_GSTATUS1_2410 (0x32410000) #define S3C2410_GSTATUS1_2412 (0x32412001) +#define S3C2410_GSTATUS1_2416 (0x32416003) #define S3C2410_GSTATUS1_2440 (0x32440000) #define S3C2410_GSTATUS1_2442 (0x32440aaa) +/* some 2416 CPUs report this value also */ +#define S3C2410_GSTATUS1_2450 (0x32450003) #define S3C2410_GSTATUS2_WTRESET (1<<2) #define S3C2410_GSTATUS2_OFFRESET (1<<1) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h index de86ee8812b..0f07ba30b1f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h @@ -27,6 +27,16 @@ #define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) #define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) +#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030) +#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034) +#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040) +#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044) +#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048) +#define S3C2416_INTPND2 S3C2410_IRQREG(0x050) +#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054) +#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070) +#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074) + /* mask: 0=enable, 1=disable * 1 bit EINT, 4=EINT4, 23=EINT23 * EINT0,1,2,3 are not handled here. diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h new file mode 100644 index 00000000000..2f31b74974a --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h @@ -0,0 +1,30 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2416_MEM +#define __ASM_ARM_REGS_S3C2416_MEM + +#ifndef S3C2416_MEMREG +#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) +#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) +#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) +#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) + +#define S3C2416_REFRESH S3C2416_MEMREG(0x10) +#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h new file mode 100644 index 00000000000..e443167efb8 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2416_H +#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" + +#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) +#define S3C2416_SWRST_RESET (0x533C2416) + +/* see regs-power.h for the other registers in the power block. */ + +#endif /* __ASM_ARCH_REGS_S3C2416_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index d87ebe0cb62..08ab9dfb6ae 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -83,8 +83,7 @@ #define S3C2443_HCLKCON_DMA4 (1<<4) #define S3C2443_HCLKCON_DMA5 (1<<5) #define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_DISP (1<<9) -#define S3C2443_HCLKCON_LCDC (1<<10) +#define S3C2443_HCLKCON_LCDC (1<<9) #define S3C2443_HCLKCON_USBH (1<<11) #define S3C2443_HCLKCON_USBD (1<<12) #define S3C2443_HCLKCON_HSMMC (1<<16) diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index 72f756c5e50..8b283f847da 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -40,7 +40,9 @@ static void arch_detect_cpu(void) cpuid &= S3C2410_GSTATUS1_IDMASK; if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { + cpuid == S3C2410_GSTATUS1_2442 || + cpuid == S3C2410_GSTATUS1_2416 || + cpuid == S3C2410_GSTATUS1_2450) { fifo_mask = S3C2440_UFSTAT_TXMASK; fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; } else { diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 9a8c0657ae5..cef6a65637b 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,8 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 + !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 config S3C2412_DMA diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig new file mode 100644 index 00000000000..657e4fe17f3 --- /dev/null +++ b/arch/arm/mach-s3c2416/Kconfig @@ -0,0 +1,39 @@ +# arch/arm/mach-s3c2416/Kconfig +# +# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> +# +# Licensed under GPLv2 + +# note, this also supports the S3C2450 which is so similar it has the same +# ID code as the S3C2416. + +config CPU_S3C2416 + bool + depends on ARCH_S3C2410 + select CPU_ARM926T + select S3C2416_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 + select S3C_GPIO_PULL_UPDOWN + select SAMSUNG_CLKSRC + select S3C2443_CLOCK + help + Support for the S3C2416 SoC from the S3C24XX line + +config S3C2416_DMA + bool + depends on CPU_S3C2416 + help + Internal config node for S3C2416 DMA support + +menu "S3C2416 Machines" + +config MACH_SMDK2416 + bool "SMDK2416" + select CPU_S3C2416 + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + help + Say Y here if you are using an SMDK2416 + +endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile new file mode 100644 index 00000000000..6c12c7bf40a --- /dev/null +++ b/arch/arm/mach-s3c2416/Makefile @@ -0,0 +1,19 @@ +# arch/arm/mach-s3c2416/Makefile +# +# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o +obj-$(CONFIG_CPU_S3C2416) += irq.o + +#obj-$(CONFIG_S3C2416_DMA) += dma.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c new file mode 100644 index 00000000000..7ccf5a2a2bf --- /dev/null +++ b/arch/arm/mach-s3c2416/clock.c @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-s3c2416/clock.c + * + * Copyright (c) 2010 Simtec Electronics + * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> + * + * S3C2416 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/clk.h> + +#include <plat/s3c2416.h> +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu.h> + +#include <plat/cpu-freq.h> +#include <plat/pll6553x.h> +#include <plat/pll.h> + +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> +#include <mach/regs-s3c2443-clock.h> + +static unsigned int armdiv[8] = { + [0] = 1, + [1] = 2, + [2] = 3, + [3] = 4, + [5] = 6, + [7] = 8, +}; + +/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */ +static struct clksrc_clk hsmmc_div[] = { + [0] = { + .clk = { + .name = "hsmmc-div", + .id = 1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, + }, + [1] = { + .clk = { + .name = "hsmmc-div", + .id = 0, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, + }, +}; + +static struct clksrc_clk hsmmc_mux[] = { + [0] = { + .clk = { + .id = 1, + .name = "hsmmc-if", + .ctrlbit = (1 << 6), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[0].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, + }, + [1] = { + .clk = { + .id = 0, + .name = "hsmmc-if", + .ctrlbit = (1 << 12), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[1].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, + }, +}; + + +static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +void __init_or_cpufreq s3c2416_setup_clocks(void) +{ + s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div); +} + + +static struct clksrc_clk *clksrcs[] __initdata = { + &hsmmc_div[0], + &hsmmc_div[1], + &hsmmc_mux[0], + &hsmmc_mux[1], +}; + +void __init s3c2416_init_clocks(int xtal) +{ + u32 epllcon = __raw_readl(S3C2443_EPLLCON); + u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); + int ptr; + + /* s3c2416 EPLL compatible with s3c64xx */ + clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); + + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_pwmclk_init(); + +} diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c new file mode 100644 index 00000000000..89f521d59d0 --- /dev/null +++ b/arch/arm/mach-s3c2416/irq.c @@ -0,0 +1,254 @@ +/* linux/arch/arm/mach-s3c2416/irq.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + generic_handle_irq(irq); + + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2416_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2416_irq_wdtac97 = { + .mask = s3c2416_irq_wdtac97_mask, + .unmask = s3c2416_irq_wdtac97_unmask, + .ack = s3c2416_irq_wdtac97_ack, +}; + + +/* LCD sub interrupts */ + +static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2416_irq_lcd_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2416_irq_lcd_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_LCD); +} + +static void s3c2416_irq_lcd_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2416_irq_lcd = { + .mask = s3c2416_irq_lcd_mask, + .unmask = s3c2416_irq_lcd_unmask, + .ack = s3c2416_irq_lcd_ack, +}; + + +/* DMA sub interrupts */ + +static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + + +static void s3c2416_irq_dma_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2416_irq_dma_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_DMA); +} + +static void s3c2416_irq_dma_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2416_irq_dma = { + .mask = s3c2416_irq_dma_mask, + .unmask = s3c2416_irq_dma_unmask, + .ack = s3c2416_irq_dma_ack, +}; + + +/* UART3 sub interrupts */ + +static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + + +static void s3c2416_irq_uart3_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2416_irq_uart3_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART3); +} + +static void s3c2416_irq_uart3_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2416_irq_uart3 = { + .mask = s3c2416_irq_uart3_mask, + .unmask = s3c2416_irq_uart3_unmask, + .ack = s3c2416_irq_uart3_ack, +}; + + +/* IRQ initialisation code */ + +static int __init s3c2416_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + set_irq_chip(base, &s3c_irq_level_chip); + set_irq_handler(base, handle_level_irq); + set_irq_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + set_irq_chip(irqno, chip); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int __init s3c2416_irq_add(struct sys_device *sysdev) +{ + printk(KERN_INFO "S3C2416: IRQ Support\n"); + + s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, + IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); + + s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, + &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, + &s3c2416_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, + &s3c2416_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2416_irq_driver = { + .add = s3c2416_irq_add, +}; + +static int __init s3c2416_irq_init(void) +{ + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver); +} + +arch_initcall(s3c2416_irq_init); + diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c new file mode 100644 index 00000000000..5fc3f67ef26 --- /dev/null +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -0,0 +1,206 @@ +/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mtd/partitions.h> +#include <linux/gpio.h> +#include <linux/fb.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> + +#include <mach/idle.h> +#include <mach/leds-gpio.h> +#include <plat/iic.h> + +#include <plat/s3c2416.h> +#include <plat/gpio-cfg.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/nand.h> + +#include <plat/regs-fb-v4.h> +#include <plat/fb.h> + +#include <plat/common-smdk.h> + +static struct map_desc smdk2416_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON (S3C2410_UCON_DEFAULT | \ + S3C2440_UCON_PCLK | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) + +#define UFCON (S3C2410_UFCON_RXTRIG8 | \ + S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16) + +static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON | 0x50, + .ufcon = UFCON, + } +}; + +struct s3c_fb_pd_win smdk2416_fb_win[] = { + [0] = { + /* think this is the same as the smdk6410 */ + .win_mode = { + .pixclock = 41094, + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .default_bpp = 16, + .max_bpp = 32, + }, +}; + +static void s3c2416_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio; + + for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} + +static struct s3c_fb_platdata smdk2416_fb_platdata = { + .win[0] = &smdk2416_fb_win[0], + .setup_gpio = s3c2416_fb_gpio_setup_24bpp, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +static struct platform_device *smdk2416_devices[] __initdata = { + &s3c_device_fb, + &s3c_device_wdt, + &s3c_device_ohci, + &s3c_device_i2c0, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, +}; + +static void __init smdk2416_map_io(void) +{ + s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); +} + +static void __init smdk2416_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_fb_set_platdata(&smdk2416_fb_platdata); + + gpio_request(S3C2410_GPB(4), "USBHost Power"); + gpio_direction_output(S3C2410_GPB(4), 1); + + gpio_request(S3C2410_GPB(3), "Display Power"); + gpio_direction_output(S3C2410_GPB(3), 1); + + gpio_request(S3C2410_GPB(1), "Display Reset"); + gpio_direction_output(S3C2410_GPB(1), 1); + + platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); + smdk_machine_init(); +} + +MACHINE_START(SMDK2416, "SMDK2416") + /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2416_map_io, + .init_machine = smdk2416_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c new file mode 100644 index 00000000000..35dabccd0ac --- /dev/null +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s3c2416/s3c2416.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * Samsung S3C2416 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/sysdev.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/reset.h> +#include <mach/idle.h> +#include <mach/regs-s3c2443-clock.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/s3c2416.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#include <plat/iic-core.h> + +static struct map_desc s3c2416_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2416_sysclass = { + .name = "s3c2416-core", +}; + +static struct sys_device s3c2416_sysdev = { + .cls = &s3c2416_sysclass, +}; + +static void s3c2416_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2416_init(void) +{ + printk(KERN_INFO "S3C2416: Initializing architecture\n"); + + s3c24xx_reset_hook = s3c2416_hard_reset; + /* s3c24xx_idle = s3c2416_idle; */ + + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + + s3c_device_fb.name = "s3c2443-fb"; + + return sysdev_register(&s3c2416_sysdev); +} + +void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); + + s3c_device_nand.name = "s3c2416-nand"; +} + +/* s3c2416_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2416_map_io(void) +{ + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + + iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2416 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2416_core_init(void) +{ + return sysdev_class_register(&s3c2416_sysclass); +} + +core_initcall(s3c2416_core_init); diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 698140af247..4fef723126f 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -8,6 +8,7 @@ config CPU_S3C2443 select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC + select S3C2443_CLOCK help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 62cd4eaee01..83b1aa63d77 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -21,6 +21,7 @@ */ #include <linux/init.h> + #include <linux/module.h> #include <linux/kernel.h> #include <linux/list.h> @@ -54,111 +55,13 @@ * set the correct muxing at initialisation */ -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - /* clock selections */ -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, - .id = -1, -}; - static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, }; -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -static struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .id = -1, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -266,44 +169,6 @@ static struct clksrc_clk clk_arm = { .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, }; -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -static struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -/* uartclk - * - * UART baud-rate clock sourced from esysclk via a divisor -*/ - -static struct clksrc_clk clk_uart = { - .clk = { - .name = "uartclk", - .id = -1, - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - - /* hsspi * * high-speed spi clock, sourced from esysclk @@ -320,21 +185,6 @@ static struct clksrc_clk clk_hsspi = { .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, }; -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; /* clk_hsmcc_div * @@ -433,89 +283,16 @@ static struct clksrc_clk clk_i2s = { .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, }; -/* cam-if - * - * camera interface bus-clock, divided down from esysclk -*/ - -static struct clksrc_clk clk_cam = { - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, -}; - -/* display-if - * - * display interface clock, divided from esysclk -*/ - -static struct clksrc_clk clk_display = { - .clk = { - .name = "display-if", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .id = -1, - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { - .name = "nand", - .id = -1, - .parent = &clk_h, - }, { .name = "sdi", .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - }, { .name = "iis", .id = -1, .parent = &clk_p, @@ -537,179 +314,12 @@ static struct clk init_clocks_disable[] = { }; static struct clk init_clocks[] = { - { - .name = "dma", - .id = 0, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma", - .id = 1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma", - .id = 2, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma", - .id = 3, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma", - .id = 4, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma", - .id = 5, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "hsmmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, - }, { - .name = "cfc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus_host.clk, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - } -}; - -/* clocks to add where we need to check their parentage */ - -static struct clksrc_clk __initdata *init_list[] = { - &clk_epllref, /* should be first */ - &clk_esysclk, - &clk_msysclk, - &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, - &clk_cam, - &clk_uart, - &clk_display, - &clk_hsmmc_div, - &clk_usb_bus_host, }; -static void __init s3c2443_clk_initparents(void) -{ - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++) - s3c_set_clksrc(init_list[ptr], true); -} - -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - /* clocks to add straight away */ static struct clksrc_clk *clksrcs[] __initdata = { - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, &clk_arm, - &clk_uart, - &clk_display, - &clk_cam, &clk_i2s_eplldiv, &clk_i2s, &clk_hsspi, @@ -717,92 +327,32 @@ static struct clksrc_clk *clksrcs[] __initdata = { }; static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_mpllref, &clk_hsmmc, &clk_armdiv, - &clk_prediv, }; void __init_or_cpufreq s3c2443_setup_clocks(void) { - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = s3c2443_get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - - fclk = pll / s3c2443_fclk_div(clkdiv0); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); - - printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); + s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div); } void __init s3c2443_init_clocks(int xtal) { - struct clk *clkp; unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ret; int ptr; - /* s3c2443 parents h and p clocks from prediv */ - clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div); - s3c24xx_register_baseclocks(xtal); s3c2443_setup_clocks(); - s3c2443_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - clk_usb_bus.parent = &clk_usb_bus_host.clk; - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - /* register clocks from clock array */ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); @@ -819,17 +369,8 @@ void __init s3c2443_init_clocks(int xtal) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h index 90bbd72fdc4..5ef0bb698ee 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h @@ -20,6 +20,7 @@ #define S3C6400_PLL_SDIV_SHIFT (0) #include <asm/div64.h> +#include <plat/pll6553x.h> static inline unsigned long s3c6400_get_pll(unsigned long baseclk, u32 pllcon) @@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk, return (unsigned long)fvco; } -#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) -#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) -#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) -#define S3C6400_EPLL_MDIV_SHIFT (16) -#define S3C6400_EPLL_PDIV_SHIFT (8) -#define S3C6400_EPLL_SDIV_SHIFT (0) -#define S3C6400_EPLL_KDIV_MASK (0xffff) - static inline unsigned long s3c6400_get_epll(unsigned long baseclk) { - unsigned long result; - u32 epll0 = __raw_readl(S3C_EPLL_CON0); - u32 epll1 = __raw_readl(S3C_EPLL_CON1); - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; - pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; - sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; - kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; + return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index a830fad6f89..3ce8f010b3c 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -45,6 +45,12 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. +config S3C2443_CLOCK + bool + help + Clock code for the S3C2443 and similar processors, which includes + the S3C2416 and S3C2450. + config S3C24XX_DCLK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2237c41141..44aea8868f8 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 9ca64df35bf..76d0858c3cb 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,6 +49,7 @@ #include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> +#include <plat/s3c2416.h> #include <plat/s3c244x.h> #include <plat/s3c2443.h> @@ -57,6 +58,7 @@ static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; +static const char name_s3c2416[] = "S3C2416/S3C2450"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2442b[] = "S3C2442B"; @@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a strange version of the s3c2416 */ + .idcode = 0x32450003, + .idmask = 0xffffffff, + .map_io = s3c2416_map_io, + .init_clocks = s3c2416_init_clocks, + .init_uarts = s3c2416_init_uarts, + .init = s3c2416_init, + .name = name_s3c2416, + }, { .idcode = 0x32443001, .idmask = 0xffffffff, @@ -170,6 +181,16 @@ static struct map_desc s3c_iodesc[] __initdata = { static unsigned long s3c24xx_read_idcode_v5(void) { +#if defined(CONFIG_CPU_S3C2416) + /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */ + + u32 gs = __raw_readl(S3C24XX_GSTATUS1); + + /* test for s3c2416 or similar device */ + if ((gs >> 16) == 0x3245) + return gs; +#endif + #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) return __raw_readl(S3C2412_GSTATUS1); #else diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h index 7ea8bffa7a9..005729a1077 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ b/arch/arm/plat-s3c24xx/include/plat/pll.h @@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) return (unsigned int)fvco; } + +#define S3C2416_PLL_M_SHIFT (14) +#define S3C2416_PLL_P_SHIFT (5) +#define S3C2416_PLL_S_MASK (7) +#define S3C2416_PLL_M_MASK ((1 << 10) - 1) +#define S3C2416_PLL_P_MASK (63) + +static inline unsigned int +s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int m, p, s; + uint64_t fvco; + + m = pllval >> S3C2416_PLL_M_SHIFT; + p = pllval >> S3C2416_PLL_P_SHIFT; + + s = pllval & S3C2416_PLL_S_MASK; + m &= S3C2416_PLL_M_MASK; + p &= S3C2416_PLL_P_MASK; + + fvco = (uint64_t)baseclk * m; + do_div(fvco, (p << s)); + + return (unsigned int)fvco; +} diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h new file mode 100644 index 00000000000..dc3c0907d22 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> + * + * Header file for s3c2416 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2416 + +struct s3c2410_uartcfg; + +extern int s3c2416_init(void); + +extern void s3c2416_map_io(void); + +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2416_init_clocks(int xtal); + +extern int s3c2416_baseclk_add(void); + +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h index 815b107ed89..a19715feb79 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -30,3 +30,22 @@ extern int s3c2443_baseclk_add(void); #define s3c2443_map_io NULL #define s3c2443_init NULL #endif + +/* common code used by s3c2443 and others. + * note, not to be used outside of arch/arm/mach-s3c* */ + +struct clk; /* some files don't need clk.h otherwise */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); +typedef unsigned int (*fdiv_fn)(unsigned long clkcon0); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); + +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; +extern struct clksrc_clk clk_msysclk; diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index b61bdb79373..9ecc5d91367 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable) /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); /* show the clock-slow value */ diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c new file mode 100644 index 00000000000..461f070eb62 --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -0,0 +1,472 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c + * + * Copyright (c) 2007, 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 Clock control suport - common code + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/regs-s3c2443-clock.h> + +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu.h> + +#include <plat/cpu-freq.h> + + +static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) +{ + u32 ctrlbit = clk->ctrlbit; + u32 con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +int s3c2443_clkcon_enable_h(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_HCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_PCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_s(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_SCLKCON, clk, enable); +} + +/* mpllref is a direct descendant of clk_xtal by default, but it is not + * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as + * such directly equating the two source clocks is impossible. + */ +struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, + .id = -1, +}; + +static struct clk *clk_epllref_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpllref, + [2] = &clk_xtal, + [3] = &clk_ext, +}; + +struct clksrc_clk clk_epllref = { + .clk = { + .name = "epllref", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_epllref_sources, + .nr_sources = ARRAY_SIZE(clk_epllref_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, +}; + +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ + +static struct clk *clk_sysclk_sources[] = { + [0] = &clk_epllref.clk, + [1] = &clk_epll, +}; + +struct clksrc_clk clk_esysclk = { + .clk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_sysclk_sources, + .nr_sources = ARRAY_SIZE(clk_sysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, +}; + +static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV0); + + div &= S3C2443_CLKDIV0_EXTDIV_MASK; + div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ + + return parent_rate / (div + 1); +} + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_mpllref, + .id = -1, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_mdivclk, + }, +}; + +static struct clk *clk_msysclk_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpll, + [2] = &clk_mdivclk, + [3] = &clk_mpllref, +}; + +struct clksrc_clk clk_msysclk = { + .clk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_msysclk_sources, + .nr_sources = ARRAY_SIZE(clk_msysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, +}; + +/* prediv + * + * this divides the msysclk down to pass to h/p/etc. + */ + +static unsigned long s3c2443_prediv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return rate / (clkdiv0 + 1); +} + +static struct clk clk_prediv = { + .name = "prediv", + .id = -1, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_prediv_getrate, + }, +}; + +/* usbhost + * + * usb host bus-clock, usually 48MHz to provide USB bus clock timing +*/ + +static struct clksrc_clk clk_usb_bus_host = { + .clk = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, +}; + +/* common clksrc clocks */ + +static struct clksrc_clk clksrc_clks[] = { + { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, + }, { + /* camera interface bus-clock, divided down from esysclk */ + .clk = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, + }, { + .clk = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, + }, +}; + + +static struct clk init_clocks_off[] = { + { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIC, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA3, + }, { + .name = "dma", + .id = 4, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA4, + }, { + .name = "dma", + .id = 5, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA5, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_HSMMC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBD, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_LCDC, + + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_PWMT, + }, { + .name = "cfc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_CFC, + }, { + .name = "ssmc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_SSMC, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_WDT, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_AC97, + }, { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus_host.clk, + } +}; + +static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; + + return clkcon0 + 1; +} + +/* EPLLCON compatible enough to get on/off information */ + +void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + struct clk *xtal_clk; + unsigned long xtal; + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + int ptr; + + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + pll = get_mpll(mpllcon, xtal); + clk_msysclk.clk.rate = pll; + + fclk = pll / get_fdiv(clkdiv0); + hclk = s3c2443_prediv_getrate(&clk_prediv); + hclk /= s3c2443_get_hdiv(clkdiv0); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + + s3c24xx_setup_clocks(fclk, hclk, pclk); + + printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) + s3c_set_clksrc(&clksrc_clks[ptr], true); + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); + clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); + } + + printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_epll)), + print_mhz(clk_get_rate(&clk_usb_bus))); +} + +static struct clk *clks[] __initdata = { + &clk_prediv, + &clk_mpllref, + &clk_mdivclk, + &clk_ext, + &clk_epll, + &clk_usb_bus, +}; + +static struct clksrc_clk *clksrcs[] __initdata = { + &clk_usb_bus_host, + &clk_epllref, + &clk_esysclk, + &clk_msysclk, +}; + +void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + int ptr; + + /* s3c2443 parents h and p clocks from prediv */ + clk_h.parent = &clk_prediv; + clk_p.parent = &clk_prediv; + + clk_usb_bus.parent = &clk_usb_bus_host.clk; + clk_epll.parent = &clk_epllref.clk; + + s3c24xx_register_baseclocks(xtal); + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + /* See s3c2443/etc notes on disabling clocks at init time */ + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + s3c2443_common_setup_clocks(get_mpll, get_fdiv); +} diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 1b25c9d8c40..8bf79f3efdf 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks) } } +/** + * s3c_disable_clocks() - disable an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * for internal use only at initialisation time. disable the clocks in the + * @clkp array. + */ + +void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) +{ + for (; nr_clks > 0; nr_clks--, clkp++) + (clkp->enable)(clkp, 0); +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index 002a15f313f..bf60204c629 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <plat/fb.h> #include <plat/devs.h> diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index efbc984640c..0fbcd0effd8 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -92,6 +92,7 @@ extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern void s3c_register_clocks(struct clk *clk, int nr_clks); +extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); extern int s3c24xx_register_baseclocks(unsigned long xtal); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index c54f318991b..6412933d6fb 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer; extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2416_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index ffc01a76b7c..1f85649d8c1 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,6 +15,13 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + /** * struct s3c_fb_pd_win - per window setup data * @win_mode: The display parameters to initialise (not for window 0) diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h new file mode 100644 index 00000000000..b8b7e1d884f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll6553x.h @@ -0,0 +1,51 @@ +/* arch/arm/plat-samsung/include/plat/pll6553x.h + * partially from arch/arm/mach-s3c64xx/include/mach/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL6553x PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ + +#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) +#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) +#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) +#define PLL6553X_KDIV_MASK (0xffff) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll0, u32 pll1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll1 & PLL6553X_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} |