diff options
Diffstat (limited to 'arch/arm')
43 files changed, 206 insertions, 124 deletions
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 4c8c0e46027..6179d94dd5c 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/boot/compressed/head-sa1100.S * - * Copyright (C) 1999 Nicolas Pitre <nico@cam.org> + * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net> * * SA1100 specific tweaks. This is merged into head.S by the linker. * diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 920ced0b73c..f232941de8a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,6 +22,7 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <asm/mach/irq.h> diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9ed2377fe8e..d0daeab2234 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -19,31 +19,21 @@ #ifdef __KERNEL__ +/* + * On ARM, ordinary assignment (str instruction) doesn't clear the local + * strex/ldrex monitor on some implementations. The reason we can use it for + * atomic_set() is the clrex or dummy strex done on every exception return. + */ #define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) (((v)->counter) = (i)) #if __LINUX_ARM_ARCH__ >= 6 /* * ARMv6 UP and SMP safe atomic ops. We use load exclusive and * store exclusive to ensure that these are atomic. We may loop - * to ensure that the update happens. Writing to 'v->counter' - * without using the following operations WILL break the atomic - * nature of these ops. + * to ensure that the update happens. */ -static inline void atomic_set(atomic_t *v, int i) -{ - unsigned long tmp; - - __asm__ __volatile__("@ atomic_set\n" -"1: ldrex %0, [%1]\n" -" strex %0, %2, [%1]\n" -" teq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&v->counter), "r" (i) - : "cc"); -} - static inline void atomic_add(int i, atomic_t *v) { unsigned long tmp; @@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #error SMP not supported on pre-ARMv6 CPUs #endif -#define atomic_set(v,i) (((v)->counter) = (i)) - static inline int atomic_add_return(int i, atomic_t *v) { unsigned long flags; diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h index feaa75f0013..66c160b8547 100644 --- a/arch/arm/include/asm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -4,7 +4,7 @@ #ifndef __ASMARM_CACHE_H #define __ASMARM_CACHE_H -#define L1_CACHE_SHIFT 5 +#define L1_CACHE_SHIFT CONFIG_ARM_L1_CACHE_SHIFT #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) /* diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 0abf386ba3d..226cddd2fb6 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -6,8 +6,6 @@ #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ -#define pcibios_scan_all_fns(a, b) 0 - #ifdef CONFIG_PCI_HOST_ITE8152 /* ITE bridge requires setting latency timer to avoid early bus access termination by PIC bus mater devices diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index 073e85b9b96..bc631161e9c 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -35,7 +35,9 @@ #define ARM(x...) #define THUMB(x...) x +#ifdef __ASSEMBLY__ #define W(instr) instr.w +#endif #define BSYM(sym) sym + 1 #else /* !CONFIG_THUMB2_KERNEL */ @@ -45,7 +47,9 @@ #define ARM(x...) x #define THUMB(x...) +#ifdef __ASSEMBLY__ #define W(instr) instr +#endif #define BSYM(sym) sym #endif /* CONFIG_THUMB2_KERNEL */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3d727a8a23b..0a2ba51cf35 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -272,7 +272,15 @@ __und_svc: @ @ r0 - instruction @ +#ifndef CONFIG_THUMB2_KERNEL ldr r0, [r2, #-4] +#else + ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2 + and r9, r0, #0xf800 + cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 + ldrhhs r9, [r2] @ bottom 16 bits + orrhs r0, r9, r0, lsl #16 +#endif adr r9, BSYM(1f) bl call_fpe @@ -678,7 +686,9 @@ ENTRY(fp_enter) .word no_fp .previous -no_fp: mov pc, lr +ENTRY(no_fp) + mov pc, lr +ENDPROC(no_fp) __und_usr_unknown: enable_irq @@ -734,13 +744,6 @@ ENTRY(__switch_to) #ifdef CONFIG_MMU ldr r6, [r2, #TI_CPU_DOMAIN] #endif -#if __LINUX_ARM_ARCH__ >= 6 -#ifdef CONFIG_CPU_32v6K - clrex -#else - strex r5, r4, [ip] @ Clear exclusive monitor -#endif -#endif #if defined(CONFIG_HAS_TLS_REG) mcr p15, 0, r3, c13, c0, 3 @ set TLS register #elif !defined(CONFIG_TLS_REG_EMUL) diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index a4eaf4f920c..e17e3c30d95 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -76,13 +76,25 @@ #ifndef CONFIG_THUMB2_KERNEL .macro svc_exit, rpsr msr spsr_cxsf, \rpsr +#if defined(CONFIG_CPU_32v6K) + clrex @ clear the exclusive monitor ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr +#elif defined (CONFIG_CPU_V6) + ldr r0, [sp] + strex r1, r2, [sp] @ clear the exclusive monitor + ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr +#endif .endm .macro restore_user_regs, fast = 0, offset = 0 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc +#if defined(CONFIG_CPU_32v6K) + clrex @ clear the exclusive monitor +#elif defined (CONFIG_CPU_V6) + strex r1, r2, [sp] @ clear the exclusive monitor +#endif .if \fast ldmdb sp, {r1 - lr}^ @ get calling r1 - lr .else @@ -98,6 +110,7 @@ .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr + clrex @ clear the exclusive monitor ldr r0, [sp, #S_SP] @ top of the stack ldr r1, [sp, #S_PC] @ return address tst r0, #4 @ orig stack 8-byte aligned? @@ -110,6 +123,7 @@ .endm .macro restore_user_regs, fast = 0, offset = 0 + clrex @ clear the exclusive monitor mov r2, sp load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index f692efddd44..60c62c377fa 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/module.h> +#include <linux/stop_machine.h> #include <linux/stringify.h> #include <asm/traps.h> #include <asm/cacheflush.h> @@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) flush_insns(p->addr, 1); } +/* + * The actual disarming is done here on each CPU and synchronized using + * stop_machine. This synchronization is necessary on SMP to avoid removing + * a probe between the moment the 'Undefined Instruction' exception is raised + * and the moment the exception handler reads the faulting instruction from + * memory. + */ +int __kprobes __arch_disarm_kprobe(void *p) +{ + struct kprobe *kp = p; + *kp->addr = kp->opcode; + flush_insns(kp->addr, 1); + return 0; +} + void __kprobes arch_disarm_kprobe(struct kprobe *p) { - *p->addr = p->opcode; - flush_insns(p->addr, 1); + stop_machine(__arch_disarm_kprobe, p, &cpu_online_map); } void __kprobes arch_remove_kprobe(struct kprobe *p) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 39d3ffb9ff2..aecf87dfbae 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -83,6 +83,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) #ifndef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index 6ae04db1ca4..6ee2f6706f8 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S @@ -12,8 +12,9 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/cache.h> -#define COPY_COUNT (PAGE_SZ/64 PLD( -1 )) +#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 )) .text .align 5 @@ -26,17 +27,16 @@ ENTRY(copy_page) stmfd sp!, {r4, lr} @ 2 PLD( pld [r1, #0] ) - PLD( pld [r1, #32] ) + PLD( pld [r1, #L1_CACHE_BYTES] ) mov r2, #COPY_COUNT @ 1 ldmia r1!, {r3, r4, ip, lr} @ 4+1 -1: PLD( pld [r1, #64] ) - PLD( pld [r1, #96] ) -2: stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 +1: PLD( pld [r1, #2 * L1_CACHE_BYTES]) + PLD( pld [r1, #3 * L1_CACHE_BYTES]) +2: + .rept (2 * L1_CACHE_BYTES / 16 - 1) stmia r0!, {r3, r4, ip, lr} @ 4 ldmia r1!, {r3, r4, ip, lr} @ 4 + .endr subs r2, r2, #1 @ 1 stmia r0!, {r3, r4, ip, lr} @ 4 ldmgtia r1!, {r3, r4, ip, lr} @ 4 diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 67964bcfc85..6dc06487f3c 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines * - * Author: Nicolas Pitre <nico@cam.org> + * Author: Nicolas Pitre <nico@fluxnic.net> * - contributed to gcc-3.4 on Sep 30, 2003 * - adapted for the Linux kernel on Oct 2, 2003 */ diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S index 09b548cac1a..eb0edb80d7b 100644 --- a/arch/arm/lib/sha1.S +++ b/arch/arm/lib/sha1.S @@ -3,7 +3,7 @@ * * SHA transform optimized for ARM * - * Copyright: (C) 2005 by Nicolas Pitre <nico@cam.org> + * Copyright: (C) 2005 by Nicolas Pitre <nico@fluxnic.net> * Created: September 17, 2005 * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 412aa49ad2f..d1f775e8635 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -771,9 +771,9 @@ void __init at91_add_device_pwm(u32 mask) {} * AC97 * -------------------------------------------------------------------- */ -#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) +#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct atmel_ac97_data ac97_data; +static struct ac97c_platform_data ac97_data; static struct resource ac97_resources[] = { [0] = { @@ -789,7 +789,7 @@ static struct resource ac97_resources[] = { }; static struct platform_device at91cap9_ac97_device = { - .name = "ac97c", + .name = "atmel_ac97c", .id = 1, .dev = { .dma_mask = &ac97_dmamask, @@ -800,7 +800,7 @@ static struct platform_device at91cap9_ac97_device = { .num_resources = ARRAY_SIZE(ac97_resources), }; -void __init at91_add_device_ac97(struct atmel_ac97_data *data) +void __init at91_add_device_ac97(struct ac97c_platform_data *data) { if (!data) return; @@ -818,7 +818,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) platform_device_register(&at91cap9_ac97_device); } #else -void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} +void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 83a1a0fef47..d6940870e40 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -364,7 +364,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; /* * AC97 */ -static struct atmel_ac97_data cap9adk_ac97_data = { +static struct ac97c_platform_data cap9adk_ac97_data = { // .reset_pin = ... not connected }; diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9ba7ba2cc3b..f78a55e5ad0 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -340,7 +340,7 @@ static void __init neocore926_add_device_buttons(void) {} /* * AC97 */ -static struct atmel_ac97_data neocore926_ac97_data = { +static struct ac97c_platform_data neocore926_ac97_data = { .reset_pin = AT91_PIN_PA13, }; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index f9dc59c054b..ee8d6038ce8 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -423,6 +423,7 @@ static struct ads7846_platform_data spitz_ads7846_info = { .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, + .pressure_max = 1024, .gpio_pendown = SPITZ_GPIO_TP_INT, .wait_for_sync = spitz_wait_for_hsync, }; diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d8c023d4df3..3d4e9da3fa5 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -77,6 +77,7 @@ config ARCH_H1940 select CPU_S3C2410 select PM_H1940 if PM select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the HP IPAQ H1940 @@ -89,6 +90,7 @@ config MACH_N30 bool "Acer N30 family" select CPU_S3C2410 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. @@ -103,6 +105,7 @@ config ARCH_BAST select S3C24XX_DCLK select ISA select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) @@ -111,6 +114,7 @@ config MACH_OTOM bool "NexVision OTOM Board" select CPU_S3C2410 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Nex Vision OTOM board @@ -154,6 +158,7 @@ config MACH_QT2410 bool "QT2410" select CPU_S3C2410 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Armzone QT2410 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 35c1bde89cf..c2bdc4635d1 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -48,6 +48,7 @@ config MACH_JIVE bool "Logitech Jive" select CPU_S3C2412 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Logitech Jive. @@ -61,6 +62,7 @@ config MACH_SMDK2413 select MACH_S3C2413 select MACH_SMDK select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using an SMDK2413 @@ -84,6 +86,7 @@ config MACH_VSTMS bool "VMSTMS" select CPU_S3C2412 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using an VSTMS board diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 8ae1b288f7f..d7bba919a77 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -48,6 +48,7 @@ config MACH_OSIRIS select S3C2440_XTAL_12000000 select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. @@ -57,6 +58,7 @@ config MACH_RX3715 select CPU_S3C2440 select S3C2440_XTAL_16934400 select PM_H1940 if PM + select S3C_DEV_NAND help Say Y here if you are using the HP iPAQ rx3715. @@ -66,6 +68,7 @@ config ARCH_S3C2440 select S3C2440_XTAL_16934400 select MACH_SMDK select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the SMDK2440. @@ -74,6 +77,7 @@ config MACH_NEXCODER_2440 select CPU_S3C2440 select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board @@ -88,6 +92,7 @@ config MACH_AT2440EVB bool "Avantech AT2440EVB development board" select CPU_S3C2440 select S3C_DEV_USB_HOST + select S3C_DEV_NAND help Say Y here if you are using the AT2440EVB development board @@ -97,6 +102,7 @@ config MACH_MINI2440 select EEPROM_AT24 select LEDS_TRIGGER_BACKLIGHT select SND_S3C24XX_SOC_S3C24XX_UDA134X + select S3C_DEV_NAND help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig index f5af212066c..770b72067e3 100644 --- a/arch/arm/mach-s3c6400/Kconfig +++ b/arch/arm/mach-s3c6400/Kconfig @@ -26,6 +26,7 @@ config MACH_SMDK6400 bool "SMDK6400" select CPU_S3C6400 select S3C_DEV_HSMMC + select S3C_DEV_NAND select S3C6400_SETUP_SDHCI help Machine support for the Samsung SMDK6400 diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index f9d0f09f976..53fc3ff657f 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -102,6 +102,7 @@ config MACH_HMT bool "Airgoo HMT" select CPU_S3C6410 select S3C_DEV_FB + select S3C_DEV_NAND select S3C_DEV_USB_HOST select S3C64XX_SETUP_FB_24BPP select HAVE_PWM diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index 95f9c5a6d6d..cb4521a6f42 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -39,7 +39,7 @@ typedef struct { static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; -static spinlock_t dma_list_lock; +static DEFINE_SPINLOCK(dma_list_lock); static irqreturn_t dma_irq_handler(int irq, void *dev_id) diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h index 3959b20d5d1..28c2cf50c25 100644 --- a/arch/arm/mach-sa1100/include/mach/assabet.h +++ b/arch/arm/mach-sa1100/include/mach/assabet.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/assabet.h * - * Created 2000/06/05 by Nicolas Pitre <nico@cam.org> + * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net> * * This file contains the hardware specific definitions for Assabet * Only include this file from SA1100-specific files. diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 60711822b12..99f5856d8de 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/hardware.h * - * Copyright (C) 1998 Nicolas Pitre <nico@cam.org> + * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net> * * This file contains the hardware definitions for SA1100 architecture * diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index e9f8eed900f..d5277f9bee7 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/memory.h * - * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org> + * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net> */ #ifndef __ASM_ARCH_MEMORY_H diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h index d3f044f92c0..ffe2bc45eed 100644 --- a/arch/arm/mach-sa1100/include/mach/neponset.h +++ b/arch/arm/mach-sa1100/include/mach/neponset.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/neponset.h * - * Created 2000/06/05 by Nicolas Pitre <nico@cam.org> + * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net> * * This file contains the hardware specific definitions for Assabet * Only include this file from SA1100-specific files. diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h index 942b153e251..ba9da9f7f18 100644 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ b/arch/arm/mach-sa1100/include/mach/system.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/system.h * - * Copyright (c) 1999 Nicolas Pitre <nico@cam.org> + * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> */ #include <mach/hardware.h> diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 714160b03d7..6cb39ddde65 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/uncompress.h * - * (C) 1999 Nicolas Pitre <nico@cam.org> + * (C) 1999 Nicolas Pitre <nico@fluxnic.net> * * Reorganised to be machine independent. */ diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 111cce67ad2..c83fdc80edf 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -15,7 +15,7 @@ * Save more value for the resume function! Support * Bitsy/Assabet/Freebird board * - * 2001-08-29: Nicolas Pitre <nico@cam.org> + * 2001-08-29: Nicolas Pitre <nico@fluxnic.net> * Cleaned up, pushed platform dependent stuff * in the platform specific files. * diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 711c0295c66..95d92e8e56a 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -4,7 +4,7 @@ * Copyright (C) 1998 Deborah Wallach. * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com> * - * 2000/03/29 (C) Nicolas Pitre <nico@cam.org> + * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net> * Rewritten: big cleanup, much simpler, better HZ accuracy. * */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5fe595aeba6..8d43e58f924 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -771,3 +771,8 @@ config CACHE_XSC3L2 select OUTER_CACHE help This option enables the L2 cache on XScale3. + +config ARM_L1_CACHE_SHIFT + int + default 6 if ARCH_OMAP3 + default 5 diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index cc8829d7e11..379f7855605 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -25,6 +25,19 @@ #include "fault.h" +/* + * Fault status register encodings. We steal bit 31 for our own purposes. + */ +#define FSR_LNX_PF (1 << 31) +#define FSR_WRITE (1 << 11) +#define FSR_FS4 (1 << 10) +#define FSR_FS3_0 (15) + +static inline int fsr_fs(unsigned int fsr) +{ + return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6; +} + #ifdef CONFIG_MMU #ifdef CONFIG_KPROBES @@ -182,18 +195,35 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) #define VM_FAULT_BADMAP 0x010000 #define VM_FAULT_BADACCESS 0x020000 -static int +/* + * Check that the permissions on the VMA allow for the fault which occurred. + * If we encountered a write fault, we must have write permission, otherwise + * we allow any permission. + */ +static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) +{ + unsigned int mask = VM_READ | VM_WRITE | VM_EXEC; + + if (fsr & FSR_WRITE) + mask = VM_WRITE; + if (fsr & FSR_LNX_PF) + mask = VM_EXEC; + + return vma->vm_flags & mask ? false : true; +} + +static int __kprobes __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, struct task_struct *tsk) { struct vm_area_struct *vma; - int fault, mask; + int fault; vma = find_vma(mm, addr); fault = VM_FAULT_BADMAP; - if (!vma) + if (unlikely(!vma)) goto out; - if (vma->vm_start > addr) + if (unlikely(vma->vm_start > addr)) goto check_stack; /* @@ -201,47 +231,24 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, * memory access, so we can handle it. */ good_area: - if (fsr & (1 << 11)) /* write? */ - mask = VM_WRITE; - else - mask = VM_READ|VM_EXEC|VM_WRITE; - - fault = VM_FAULT_BADACCESS; - if (!(vma->vm_flags & mask)) + if (access_error(fsr, vma)) { + fault = VM_FAULT_BADACCESS; goto out; + } /* - * If for any reason at all we couldn't handle - * the fault, make sure we exit gracefully rather - * than endlessly redo the fault. + * If for any reason at all we couldn't handle the fault, make + * sure we exit gracefully rather than endlessly redo the fault. */ -survive: - fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGBUS) - return fault; - BUG(); - } + fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0); + if (unlikely(fault & VM_FAULT_ERROR)) + return fault; if (fault & VM_FAULT_MAJOR) tsk->maj_flt++; else tsk->min_flt++; return fault; -out_of_memory: - if (!is_global_init(tsk)) - goto out; - - /* - * If we are out of memory for pid1, sleep for a while and retry - */ - up_read(&mm->mmap_sem); - yield(); - down_read(&mm->mmap_sem); - goto survive; - check_stack: if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) goto good_area; @@ -278,6 +285,13 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) goto no_context; down_read(&mm->mmap_sem); + } else { + /* + * The above down_read_trylock() might have succeeded in + * which case, we'll have missed the might_sleep() from + * down_read() + */ + might_sleep(); } fault = __do_page_fault(mm, addr, fsr, tsk); @@ -289,6 +303,16 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) return 0; + if (fault & VM_FAULT_OOM) { + /* + * We ran out of memory, call the OOM killer, and return to + * userspace (which will retry the fault, or kill us if we + * got oom-killed) + */ + pagefault_out_of_memory(); + return 0; + } + /* * If we are in kernel mode at this point, we * have no context to handle this fault with. @@ -296,16 +320,6 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!user_mode(regs)) goto no_context; - if (fault & VM_FAULT_OOM) { - /* - * We ran out of memory, or some other thing - * happened to us that made us unable to handle - * the page fault gracefully. - */ - printk("VM: killing process %s\n", tsk->comm); - do_group_exit(SIGKILL); - return 0; - } if (fault & VM_FAULT_SIGBUS) { /* * We had some memory, but were unable to @@ -489,10 +503,10 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *) asmlinkage void __exception do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); + const struct fsr_info *inf = fsr_info + fsr_fs(fsr); struct siginfo info; - if (!inf->fn(addr, fsr, regs)) + if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs)) return; printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", @@ -508,6 +522,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) asmlinkage void __exception do_PrefetchAbort(unsigned long addr, struct pt_regs *regs) { - do_translation_fault(addr, 0, regs); + do_translation_fault(addr, FSR_LNX_PF, regs); } diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 0cce37b9393..423394260bc 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -17,7 +17,7 @@ * * 2001 Sep 08: * Completely revisited, many important fixes - * Nicolas Pitre <nico@cam.org> + * Nicolas Pitre <nico@fluxnic.net> */ #include <linux/linkage.h> diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 9e573e78176..bade586fed0 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -1,7 +1,7 @@ /* * arch/arm/plat-iop/setup.c * - * Author: Nicolas Pitre <nico@cam.org> + * Author: Nicolas Pitre <nico@fluxnic.net> * Copyright (C) 2001 MontaVista Software, Inc. * Copyright (C) 2004 Intel Corporation. * diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 1060e345423..ed8ec747726 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -1,6 +1,6 @@ /* * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@cam.org> + * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> */ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c index 260fdc6ad68..5ff24e0f9f8 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-s3c/gpio.c @@ -28,7 +28,7 @@ static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) gpn = chip->chip.base; for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn > ARRAY_SIZE(s3c_gpios)); + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); s3c_gpios[gpn] = chip; } } diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 67aa93dbb69..266a10745a8 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -345,13 +345,13 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, if (!chan) return -EINVAL; - buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL); + buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC); if (!buff) { printk(KERN_ERR "%s: no memory for buffer\n", __func__); return -ENOMEM; } - lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma); + lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma); if (!lli) { printk(KERN_ERR "%s: no memory for lli\n", __func__); ret = -ENOMEM; @@ -697,7 +697,7 @@ static int __init s3c64xx_dma_init(void) printk(KERN_INFO "%s: Registering DMA channels\n", __func__); - dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0); + dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); if (!dma_pool) { printk(KERN_ERR "%s: failed to create pool\n", __func__); return -ENOMEM; diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h index 0c30dd98672..8f76a1e474d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h +++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h @@ -26,7 +26,7 @@ struct s3c64xx_dma_buff { struct s3c64xx_dma_buff *next; void *pw; - struct pl080_lli *lli; + struct pl080s_lli *lli; dma_addr_t lli_dma; }; diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 743a70094d0..7956fd3bb19 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -194,9 +194,17 @@ #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) +/* Define a group of interrupts for board-specific use (eg, for MFD + * interrupt controllers). */ +#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) + +#define IRQ_BOARD_NR 16 + +#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) +#define NR_IRQS (IRQ_BOARD_END + 1) #endif /* __ASM_PLAT_S3C64XX_IRQS_H */ diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index febac1950d8..9745852261e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -302,8 +302,8 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) return -EINVAL; val = __raw_readl(reg); - val &= ~(0xf << sclk->shift); - val |= (div - 1) << sclk->shift; + val &= ~(0xf << sclk->divider_shift); + val |= (div - 1) << sclk->divider_shift; __raw_writel(val, reg); return 0; @@ -328,6 +328,8 @@ static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) clksrc |= src_nr << sclk->shift; __raw_writel(clksrc, S3C_CLK_SRC); + + clk->parent = parent; return 0; } @@ -343,7 +345,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, if (rate > parent_rate) rate = parent_rate; else { - div = rate / parent_rate; + div = parent_rate / rate; if (div == 0) div = 1; diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c index d2f497764dc..ef88f25fb87 100644 --- a/arch/arm/plat-stmp3xxx/dma.c +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -264,7 +264,7 @@ int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, stmp3xxx_dma_free_command(ch, &descriptors [i]); - } while (i-- >= 0); + } while (i-- > 0); } return err; } diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index c8c55b46934..94be7bb6cb9 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Sep 12 12:00:16 2009 +# Last update: Fri Sep 18 21:42:00 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1638,7 +1638,7 @@ mx35evb MACH_MX35EVB MX35EVB 1643 aml_m8050 MACH_AML_M8050 AML_M8050 1644 mx35_3ds MACH_MX35_3DS MX35_3DS 1645 mars MACH_MARS MARS 1646 -ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647 +neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647 badger MACH_BADGER BADGER 1648 trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 @@ -1654,7 +1654,7 @@ vf10xx MACH_VF10XX VF10XX 1659 zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 sonix926 MACH_SONIX926 SONIX926 1661 celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 -cc9m2443 MACH_CC9M2443 CC9M2443 1663 +cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663 tw5334 MACH_TW5334 TW5334 1664 omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 @@ -1802,7 +1802,7 @@ ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811 rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 sifmain MACH_SIFMAIN SIFMAIN 1813 sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 -cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815 +cc9m2443 MACH_CC9M2443 CC9M2443 1815 xaria300 MACH_XARIA300 XARIA300 1816 it9200 MACH_IT9200 IT9200 1817 rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 @@ -2409,3 +2409,15 @@ platypus MACH_PLATYPUS PLATYPUS 2422 pss2 MACH_PSS2 PSS2 2423 davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424 str9100 MACH_STR9100 STR9100 2425 +net5big MACH_NET5BIG NET5BIG 2426 +seabed9263 MACH_SEABED9263 SEABED9263 2427 +mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 +octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429 +klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430 +klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431 +klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432 +supersonic MACH_SUPERSONIC SUPERSONIC 2433 +liberty MACH_LIBERTY LIBERTY 2434 +mh355 MACH_MH355 MH355 2435 +pc7802 MACH_PC7802 PC7802 2436 +gnet_sgc MACH_GNET_SGC GNET_SGC 2437 |