diff options
Diffstat (limited to 'arch/arm')
95 files changed, 653 insertions, 254 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a19a5266d5f..db524e75c4a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION - select GENERIC_ATOMIC64 if (!CPU_32v6K) + select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) @@ -646,7 +646,7 @@ config ARCH_S3C2410 select ARCH_HAS_CPUFREQ select HAVE_CLK select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C + select HAVE_S3C2410_I2C if I2C help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -676,8 +676,8 @@ config ARCH_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT - select HAVE_S3C2410_I2C - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S3C64XX series based systems @@ -686,10 +686,10 @@ config ARCH_S5P64X0 select CPU_V6 select GENERIC_GPIO select HAVE_CLK - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_WATCHDOG if WATCHDOG select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C - select HAVE_S3C_RTC + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. @@ -700,7 +700,7 @@ config ARCH_S5P6442 select GENERIC_GPIO select HAVE_CLK select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5P6442 CPU based systems @@ -711,9 +711,9 @@ config ARCH_S5PC100 select CPU_V7 select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C - select HAVE_S3C_RTC - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5PC100 series based systems @@ -726,9 +726,9 @@ config ARCH_S5PV210 select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C - select HAVE_S3C_RTC - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5PV210/S5PC110 series based systems @@ -739,9 +739,9 @@ config ARCH_S5PV310 select GENERIC_GPIO select HAVE_CLK select GENERIC_CLOCKEVENTS - select HAVE_S3C_RTC - select HAVE_S3C2410_I2C - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5PV310 series based systems diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6825c34646d..9be21ba648c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1084,6 +1084,6 @@ memdump: mov r12, r0 reloc_end: .align - .section ".stack", "w" + .section ".stack", "aw", %nobits user_stack: .space 4096 user_stack_end: diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index d08168941bd..366a924019a 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -57,7 +57,7 @@ SECTIONS .bss : { *(.bss) } _end = .; - .stack (NOLOAD) : { *(.stack) } + .stack : { *(.stack) } .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index ada6359160e..772f95f1aec 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* - * Set priority on all interrupts. + * Set priority on all global interrupts. */ - for (i = 0; i < max_irq; i += 4) + for (i = 32; i < max_irq; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* - * Disable all interrupts. + * Disable all interrupts. Leave the PPI and SGIs alone + * as these enables are banked registers. */ - for (i = 0; i < max_irq; i += 32) + for (i = 32; i < max_irq; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); /* @@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) { + void __iomem *dist_base; + int i; + if (gic_nr >= MAX_GIC_NR) BUG(); + dist_base = gic_data[gic_nr].dist_base; + BUG_ON(!dist_base); + gic_data[gic_nr].cpu_base = base; + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + writel(0xf0, base + GIC_CPU_PRIMASK); writel(1, base + GIC_CPU_CTRL); } diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 062b58c029a..749bb662240 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -238,7 +238,7 @@ @ Slightly optimised to avoid incrementing the pointer twice usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort .if \rept == 2 - usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort + usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort .endif add\cond \ptr, #\rept * \inc diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 6700c7fc7eb..21fa272301f 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -75,7 +75,7 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(1) USB (USBR) IT8152_PD_IRQ(0) Audio controller (ACR) */ -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) +#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 68870c77667..b4ffe9d5b52 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -13,6 +13,10 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID #define ASID(mm) ((mm)->context.id & 255) + +/* init_mm.context.id_lock should be initialized. */ +#define INIT_MM_CONTEXT(name) \ + .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index b155414192d..53d1d5deb11 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +/* we don't need complex calculations here as the pmd is folded into the pgd */ +#define pmd_addr_end(addr,end) (end) + /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 54593b0c241..21e3a4ab3b8 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, breakpoint_handler(addr, regs); break; case ARM_ENTRY_ASYNC_WATCHPOINT: - WARN_ON("Asynchronous watchpoint exception taken. " - "Debugging results may be unreliable"); + WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, regs); break; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 49643b1467e..07a50357492 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, enum armv7_counters counter) { - int ret; + int ret = 0; if (counter == ARMV7_CYCLE_COUNTER) ret = pmnc & ARMV7_FLAG_C; diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 20b7411e47f..c2e112e1a05 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); /* check current frame pointer is within bounds */ if (fp < (low + 12) || fp + 4 >= high) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cda78d59aa3..446aee97436 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN]; - sprint_symbol(sym1, where); - sprint_symbol(sym2, from); - printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2); + printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 2a161765f6d..d2cb0b3c987 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__, frame->pc, frame->lr, frame->sp); diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 1e4cbd4e7be..64f6bc1a913 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be) */ .L_found: #if __LINUX_ARM_ARCH__ >= 5 - rsb r1, r3, #0 - and r3, r3, r1 + rsb r0, r3, #0 + and r3, r3, r0 clz r3, r3 rsb r3, r3, #31 add r0, r2, r3 @@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be) addeq r2, r2, #1 mov r0, r2 #endif + cmp r1, r0 @ Clamp to maxbit + movlo r0, r1 mov pc, lr diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index cff4e0a996c..a6299e8321b 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h index 3db3a09fd39..7397bd7817d 100644 --- a/arch/arm/mach-bcmring/include/mach/vmalloc.h +++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h @@ -22,4 +22,4 @@ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles * larger physical memory designs better. */ -#define VMALLOC_END 0xf0000000 +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h index 30b3a287ed8..467b96137e4 100644 --- a/arch/arm/mach-clps711x/include/mach/vmalloc.h +++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9be261beae7..2652af124ac 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), - CLK("davinci-asp.1", NULL, &asp1_clk), + CLK("davinci-mcbsp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp.1", NULL, &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), @@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = { }; static struct platform_device dm355_asp1_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = 1, .num_resources = ARRAY_SIZE(dm355_asp1_resources), .resource = dm355_asp1_resources, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a12065e8726..c466d710d3c 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci_voicecodec", NULL, &voicecodec_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), CLK(NULL, NULL, NULL), @@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = { }; static struct platform_device dm365_asp_device = { - .name = "davinci-asp", - .id = 0, + .name = "davinci-mcbsp", + .id = -1, .num_resources = ARRAY_SIZE(dm365_asp_resources), .resource = dm365_asp_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0608dd776a1..9a2376b3137 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), - CLK("davinci-asp", NULL, &asp_clk), + CLK("davinci-mcbsp", NULL, &asp_clk), CLK("davinci_mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), @@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = { }; static struct platform_device dm644x_asp_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = -1, .num_resources = ARRAY_SIZE(dm644x_asp_resources), .resource = dm644x_asp_resources, diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h index 60bde56fba4..ea141b7a3e0 100644 --- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h +++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END 0xdf000000 +#define VMALLOC_END 0xdf000000UL diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 3a5961d3f3b..5e31b2b25da 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,5 +1,13 @@ -/* - * arch/arm/mach-ep93xx/include/mach/dma.h +/** + * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine + * + * The EP93xx DMA M2P subsystem handles DMA transfers between memory and + * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. + * See chapter 10 of the EP93xx users guide for full details on the DMA M2P + * engine. + * + * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. + * */ #ifndef __ASM_ARCH_DMA_H @@ -8,12 +16,34 @@ #include <linux/list.h> #include <linux/types.h> +/** + * struct ep93xx_dma_buffer - Information about a buffer to be transferred + * using the DMA M2P engine + * + * @list: Entry in DMA buffer list + * @bus_addr: Physical address of the buffer + * @size: Size of the buffer in bytes + */ struct ep93xx_dma_buffer { struct list_head list; u32 bus_addr; u16 size; }; +/** + * struct ep93xx_dma_m2p_client - Information about a DMA M2P client + * + * @name: Unique name for this client + * @flags: Client flags + * @cookie: User data to pass to callback functions + * @buffer_started: Non NULL function to call when a transfer is started. + * The arguments are the user data cookie and the DMA + * buffer which is starting. + * @buffer_finished: Non NULL function to call when a transfer is completed. + * The arguments are the user data cookie, the DMA buffer + * which has completed, and a boolean flag indicating if + * the transfer had an error. + */ struct ep93xx_dma_m2p_client { char *name; u8 flags; @@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client { struct ep93xx_dma_buffer *buf, int bytes, int error); - /* Internal to the DMA code. */ + /* private: Internal use only */ void *channel; }; +/* DMA M2P ports */ #define EP93XX_DMA_M2P_PORT_I2S1 0x00 #define EP93XX_DMA_M2P_PORT_I2S2 0x01 #define EP93XX_DMA_M2P_PORT_AAC1 0x02 @@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client { #define EP93XX_DMA_M2P_PORT_UART3 0x08 #define EP93XX_DMA_M2P_PORT_IRDA 0x09 #define EP93XX_DMA_M2P_PORT_MASK 0x0f -#define EP93XX_DMA_M2P_TX 0x00 -#define EP93XX_DMA_M2P_RX 0x10 -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +/* DMA M2P client flags */ +#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ +#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ + +/* + * DMA M2P client error handling flags. See the EP93xx users guide + * documentation on the DMA M2P CONTROL register for more details + */ +#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ +#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ +#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ + +/** + * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P + * subsystem + * + * @m2p: Client information to register + * returns 0 on success + * + * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA + * client + */ +int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P + * subsystem + * + * @m2p: Client to unregister + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + */ void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * If the current or next transfer positions are free on the M2P client then + * the transfer is started immediately. If not, the transfer is added to the + * list of pending transfers. This function must not be called from the + * buffer_finished callback for an M2P channel. + * + */ void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list + * for an M2P channel + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * This function must only be called from the buffer_finished callback for an + * M2P channel. It is commonly used to add the next transfer in a chained list + * of DMA transfers. + */ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client + * + * @m2p: DMA client to flush transfers on + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + * + */ void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h index 0ffbb7c85e5..40ba78e5782 100644 --- a/arch/arm/mach-footbridge/include/mach/vmalloc.h +++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h @@ -7,4 +7,4 @@ */ -#define VMALLOC_END 0xf0000000 +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h index a45915b8875..8520b4a4d4e 100644 --- a/arch/arm/mach-h720x/include/mach/vmalloc.h +++ b/arch/arm/mach-h720x/include/mach/vmalloc.h @@ -5,6 +5,6 @@ #ifndef __ARCH_ARM_VMALLOC_H #define __ARCH_ARM_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 026263c665c..7e1e9dc2c8f 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - #define ADS7846_PENDOWN (GPIO_PORTD | 25) static void ads7846_dev_init(void) @@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; -#endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", @@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { .chipselect = eukrea_mbimx27_spi_cs, .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), }; -#endif static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { { diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h index e056e7cf564..2f5a2bafb11 100644 --- a/arch/arm/mach-integrator/include/mach/vmalloc.h +++ b/arch/arm/mach-integrator/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 51ff23b72d3..3688123b5ad 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || - rev == MV88F6281_REV_A1)) || - (dev == MV88F6282_DEV_ID)) - return 200000000; + if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) + if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) + return 200000000; return 166666667; } diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 4aa86e4a152..a31c9499ab3 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index d3ea1b6c8a0..285edab776e 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num) pr_err("Failed to power up HDD%d\n", i + 1); } } - -/***************************************************************************** - * Timer - ****************************************************************************/ - -static void lacie_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer lacie_v2_timer = { - .init = lacie_v2_timer_init, -}; diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h index af521315b87..fc64f578536 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.h +++ b/arch/arm/mach-kirkwood/lacie_v2-common.h @@ -13,6 +13,4 @@ void lacie_v2_register_flash(void); void lacie_v2_register_i2c_devices(void); void lacie_v2_hdd_power_init(int hdd_num); -extern struct sys_timer lacie_v2_timer; - #endif diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 065187d177c..27901f702fe 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 5ea66f1f417..65ee21fd2f3 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index a1b45d501ae..93afd3c8bfd 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 8be09a0ce4a..3587a281d99 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -27,6 +27,10 @@ #include "mpp.h" #include "tsx1x-common.h" +/* for the PCIe reset workaround */ +#include <plat/pcie.h> + + #define QNAP_TS41X_JUMPER_JP1 45 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { @@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void) static int __init ts41x_pci_init(void) { - if (machine_is_ts41x()) + if (machine_is_ts41x()) { + /* + * Without this explicit reset, the PCIe SATA controller + * (Marvell 88sx7042/sata_mv) is known to stop working + * after a few minutes. + */ + orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + kirkwood_pcie_init(KW_PCIE0); + } return 0; } diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h index f43a68b213f..8a3b56dfd35 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void) #ifdef CONFIG_CPU_MMP2 static inline int cpu_is_mmp2(void) { - return (((cpu_readid_id() >> 8) & 0xff) == 0x58); + return (((read_cpuid_id() >> 8) & 0xff) == 0x58); +} #else #define cpu_is_mmp2() (0) #endif diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h index 31a32ad062d..d138448eff1 100644 --- a/arch/arm/mach-msm/include/mach/vmalloc.h +++ b/arch/arm/mach-msm/include/mach/vmalloc.h @@ -16,7 +16,7 @@ #ifndef __ASM_ARCH_MSM_VMALLOC_H #define __ASM_ARCH_MSM_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 354ac514eb8..84db2dfc475 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h index 93afa10b13c..d94d282fa67 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) -extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst; +extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst; #define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) + imx_add_spi_imx(&imx25_cspi_data[id], pdata) #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 99e0894e07d..fda56545d2f 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -14,6 +14,7 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> +#include <mach/spi.h> #include <asm/mach-types.h> @@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = { }; /* Platform Data for MXC CSPI */ -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; static const struct spi_imx_master pcm037_spi1_pdata __initconst = { .chipselect = pcm037_spi1_cs, .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), }; -#endif /* GPIO-keys input device */ static struct gpio_keys_button pcm037_gpio_keys[] = { @@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = { }, }; -static int eet_init_devices(void) +static int __init eet_init_devices(void) { if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) return 0; diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h index 7cca3574308..871f1ef7bff 100644 --- a/arch/arm/mach-netx/include/mach/vmalloc.h +++ b/arch/arm/mach-netx/include/mach/vmalloc.h @@ -16,4 +16,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index eaa7081fef8..9d97a72c539 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/io.h> #include <plat/board-ams-delta.h> #include <mach/gpio.h> #include <plat/keypad.h> @@ -314,7 +315,7 @@ static void __init ams_delta_init(void) static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = (void *) AMS_DELTA_MODEM_VIRT, + .membase = IOMEM(AMS_DELTA_MODEM_VIRT), .mapbase = AMS_DELTA_MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index ea0d80a89da..86ad38a20c3 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/spi/spi.h> +#include <mach/camera.h> #include <mach/hardware.h> #include <asm/mach/map.h> @@ -321,10 +322,9 @@ static struct platform_device omap_wdt_device = { static int __init omap_init_wdt(void) { if (!cpu_is_omap16xx()) - return; + return -ENODEV; - platform_device_register(&omap_wdt_device); - return 0; + return platform_device_register(&omap_wdt_device); } subsys_initcall(omap_init_wdt); #endif diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 0b07a78eeaa..acd16166640 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -11,6 +11,7 @@ #include <plat/io.h> #include <plat/tc.h> +#include <plat/flash.h> void omap1_set_vpp(struct map_info *map, int enable) { diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h index fd54b452eb2..847d00f0bb0 100644 --- a/arch/arm/mach-omap1/include/mach/camera.h +++ b/arch/arm/mach-omap1/include/mach/camera.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARCH_CAMERA_H_ #define __ASM_ARCH_CAMERA_H_ +#include <media/omap1_camera.h> + void omap1_camera_init(void *); static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info) diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h index b001f67d695..22ec4a47957 100644 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd8000000 +#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 1a85a421007..c0e1f48aa11 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -133,19 +133,18 @@ static struct omap_mbox1_priv omap1_mbox_dsp_priv = { }, }; -struct omap_mbox mbox_dsp_info = { +static struct omap_mbox mbox_dsp_info = { .name = "dsp", .ops = &omap1_mbox_ops, .priv = &omap1_mbox_dsp_priv, }; -struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; +static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; static int __devinit omap1_mbox_probe(struct platform_device *pdev) { struct resource *mem; int ret; - int i; struct omap_mbox **list; list = omap1_mboxes; diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index b3a796a6da0..372ea711fae 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -174,7 +174,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { #define OMAP16XX_MCBSP_REG_NUM 0 #endif -int __init omap1_mcbsp_init(void) +static int __init omap1_mcbsp_init(void) { if (cpu_is_omap7xx()) { omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 7835add0034..5fdef7a3482 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0) #define OMAP1XXX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ -int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) +static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b78d0749f13..9e1c4d442d3 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -27,6 +27,8 @@ #include <mach/gpio.h> #include <plat/fpga.h> +#include "pm.h" + static struct clk * uart1_ck; static struct clk * uart2_ck; static struct clk * uart3_ck; @@ -52,9 +54,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, */ static void __init omap_serial_reset(struct plat_serial8250_port *p) { - omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_DISABLE); /* disable UART */ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ - omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); /* enable UART */ if (!cpu_is_omap15xx()) { omap_serial_outp(p, UART_OMAP_SYSC, 0x01); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 1be6a214d88..7f75bc614ec 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -52,6 +52,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <plat/common.h> #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 067f4379c87..53ac762518b 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - devkit8000_vmmc1_supply.dev = mmc[0].dev; - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index 4da31e997ef..86631994776 100644 --- a/arch/arm/mach-omap2/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xf8000000 +#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d8192..c85923e56b8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/console.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8..0ec8a04b747 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/console.h> #include <plat/sram.h> #include <plat/clockdomain.h> @@ -385,6 +386,12 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +470,9 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7..9dc077e2d8a 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/serial_8250.h> #include <linux/pm_runtime.h> +#include <linux/console.h> #ifdef CONFIG_SERIAL_OMAP #include <plat/omap-serial.h> @@ -168,9 +169,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset, static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_write_reg(uart, UART_OMAP_SCR, 0x08); - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -218,7 +219,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart) return; lcr = serial_read_reg(uart, UART_LCR); - serial_write_reg(uart, UART_LCR, 0xBF); + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); uart->dll = serial_read_reg(uart, UART_DLL); uart->dlh = serial_read_reg(uart, UART_DLM); serial_write_reg(uart, UART_LCR, lcr); @@ -226,7 +227,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart) uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); uart->scr = serial_read_reg(uart, UART_OMAP_SCR); uart->wer = serial_read_reg(uart, UART_OMAP_WER); - serial_write_reg(uart, UART_LCR, 0x80); + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); uart->mcr = serial_read_reg(uart, UART_MCR); serial_write_reg(uart, UART_LCR, lcr); @@ -246,32 +247,35 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) uart->context_valid = 0; if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x07, 0xA0); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0); else - serial_write_reg(uart, UART_OMAP_MDR1, 0x7); - serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_read_reg(uart, UART_EFR); serial_write_reg(uart, UART_EFR, UART_EFR_ECB); serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ serial_write_reg(uart, UART_IER, 0x0); - serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); serial_write_reg(uart, UART_DLL, uart->dll); serial_write_reg(uart, UART_DLM, uart->dlh); serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ serial_write_reg(uart, UART_IER, uart->ier); - serial_write_reg(uart, UART_LCR, 0x80); + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); serial_write_reg(uart, UART_MCR, uart->mcr); - serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); serial_write_reg(uart, UART_EFR, efr); serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); serial_write_reg(uart, UART_OMAP_SCR, uart->scr); serial_write_reg(uart, UART_OMAP_WER, uart->wer); serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); + if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x00, 0xA1); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1); else /* UART 16x mode */ - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} @@ -406,7 +410,7 @@ void omap_uart_resume_idle(int num) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num) { + if (num == uart->num && uart->can_sleep) { omap_uart_enable_clocks(uart); /* Check for IO pad wakeup */ @@ -807,6 +811,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +837,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index e13c29eecf2..f9052e1c693 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -203,7 +203,7 @@ static struct clocksource clocksource_gpt = { static void __init omap2_gp_clocksource_init(void) { static struct omap_dm_timer *gpt; - u32 tick_rate, tick_period; + u32 tick_rate; static char err1[] __initdata = KERN_ERR "%s: failed to request dm-timer\n"; static char err2[] __initdata = KERN_ERR @@ -216,7 +216,6 @@ static void __init omap2_gp_clocksource_init(void) omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK); tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt)); - tick_period = (tick_rate / HZ) - 1; omap_dm_timer_set_load_start(gpt, 1, 0); diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index bc4c3b9aaf8..db485d3b814 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) /* Initialize gpiolib. */ orion_gpio_init(); - while (mode->mpp >= 0) { + for ( ; mode->mpp >= 0; mode++) { u32 *reg; int num_type; int shift; @@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) orion_gpio_set_unused(mode->mpp); orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO)); - - mode++; } writel(mpp_0_7_ctrl, MPP_0_7_CTRL); diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 16f1bd5324b..c1c1cd04bdd 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { static struct resource ts78xx_ts_nand_resources = { .start = TS_NAND_DATA, .end = TS_NAND_DATA + 4, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct platform_device ts78xx_ts_nand_device = { diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h index 31b65ee07b0..184913c7114 100644 --- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h +++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index ac5598ce972..d34b99febeb 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -476,8 +476,6 @@ static void __init cmx2xx_init(void) static void __init cmx2xx_init_irq(void) { - pxa27x_init_irq(); - if (cpu_is_pxa25x()) { pxa25x_init_irq(); cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 4b521e045d7..ffa50e633ee 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -116,7 +116,7 @@ static struct platform_device smc91x_device = { }, }; -#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE) +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static uint16_t lcd_power_on[] = { /* single frame */ SMART_CMD_NOOP, diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h index 3bcd86fadb8..fb700228637 100644 --- a/arch/arm/mach-rpc/include/mach/vmalloc.h +++ b/arch/arm/mach-rpc/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END 0xdc000000 +#define VMALLOC_END 0xdc000000UL diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8aa2f1902a9..6b86a722a7d 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) /* Configures BT serial port GPIOs */ s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 084d121f368..00174daf152 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = { static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2416_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2416_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 0e0d693f397..893424767ce 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = { static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2443_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2443_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 1ca7bdc6485..579d2f0f4dd 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -143,7 +143,7 @@ config MACH_SMDK6410 select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD - select HAVE_S3C2410_WATCHDOG + select HAVE_S3C2410_WATCHDOG if WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_IDE diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 249c6295647..89f35e02e88 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -45,7 +45,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index f9ef9b5c5f5..4957ab0a0d4 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -46,7 +46,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 0ad7924fe62..5dd1681c069 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/i2c.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bcd7a5d5340..1fbc45b2a43 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h index 8e845b6a7cb..b10df988526 100644 --- a/arch/arm/mach-shark/include/mach/vmalloc.h +++ b/arch/arm/mach-shark/include/mach/vmalloc.h @@ -1,4 +1,4 @@ /* * arch/arm/mach-shark/include/mach/vmalloc.h */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 54b479c35ee..51dcd59eda6 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -116,4 +116,6 @@ endmenu config SH_CLK_CPG bool +source "drivers/sh/Kconfig" + endif diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 46ca4d4abf9..d440e5f456a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "loader", .offset = 0x00000000, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "bootenv", .offset = MTDPART_OFS_APPEND, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel_ro", @@ -565,12 +567,143 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} + +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} + +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsib_clk; + struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; + int ret; + + switch (rate) { + case 44100: + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + case 48000: + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + default: + pr_err("unsupported rate in FSI2 port B\n"); + return -EINVAL; + } + + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); + clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), + + .portb_flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_OFMT(SPDIF), + .set_rate = fsi_set_rate, }; static struct resource fsi_resources[] = { @@ -634,6 +767,7 @@ static struct platform_device lcdc1_device = { static struct sh_mobile_hdmi_info hdmi_info = { .lcd_chan = &sh_mobile_lcdc1_info.ch[0], .lcd_dev = &lcdc1_device.dev, + .flags = HDMI_SND_SRC_SPDIF, }; static struct resource hdmi_resources[] = { @@ -835,6 +969,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -851,23 +990,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -876,16 +1003,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; @@ -992,6 +1112,7 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define USCCR1 0xE6058144 static void __init ap4evb_init(void) { u32 srcr4; @@ -1062,7 +1183,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ - /* enable FSI2 */ + /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); @@ -1079,6 +1200,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT41, NULL); gpio_direction_input(GPIO_PORT41); + /* setup FSI2 port B (HDMI) */ + gpio_request(GPIO_FN_FSIBCK, NULL); + __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 8565aefa21f..3aa02606943 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -50,6 +50,9 @@ #define SMSTPCR3 0xe615013c #define SMSTPCR4 0xe6150140 +#define FSIDIVA 0xFE1F8000 +#define FSIDIVB 0xFE1F8008 + /* Platforms must set frequency on their DV_CLKI pin */ struct clk sh7372_dv_clki_clk = { }; @@ -217,8 +220,7 @@ static void pllc2_disable(struct clk *clk) __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR); } -static int pllc2_set_rate(struct clk *clk, - unsigned long rate, int algo_id) +static int pllc2_set_rate(struct clk *clk, unsigned long rate) { unsigned long value; int idx; @@ -227,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, if (idx < 0) return idx; - if (rate == clk->parent->rate) { - pllc2_disable(clk); - return 0; - } + if (rate == clk->parent->rate) + return -EINVAL; value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - if (value & 0x80000000) - pllc2_disable(clk); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); - if (value & 0x80000000) - return pllc2_enable(clk); - return 0; } @@ -288,6 +282,7 @@ struct clk sh7372_pllc2_clk = { .ops = &pllc2_clk_ops, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, + .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1, .parent_table = pllc2_parent, .parent_num = ARRAY_SIZE(pllc2_parent), }; @@ -417,6 +412,93 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), }; +/* FSI DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base); + + if ((value & 0x3) != 0x3) + return 0; + + value >>= 16; + if (value < 2) + return 0; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 2, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) + return -EIO; + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, unsigned long rate) +{ + int idx; + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + return -EINVAL; + + __raw_writel(idx << 16, clk->mapping->base); + return 0; +} + +static struct clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +static struct clk_mapping sh7372_fsidiva_clk_mapping = { + .phys = FSIDIVA, + .len = 8, +}; + +struct clk sh7372_fsidiva_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ + .mapping = &sh7372_fsidiva_clk_mapping, +}; + +static struct clk_mapping sh7372_fsidivb_clk_mapping = { + .phys = FSIDIVB, + .len = 8, +}; + +struct clk sh7372_fsidivb_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ + .mapping = &sh7372_fsidivb_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &sh7372_fsidiva_clk, + &sh7372_fsidivb_clk, +}; + enum { MSTP001, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, @@ -510,8 +592,6 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), @@ -548,8 +628,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ @@ -585,6 +665,9 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 5bc6bd444d7..2b1bb9e43dd 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio) static inline int gpio_to_irq(unsigned gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) { - return -EINVAL; + return -ENOSYS; } #endif /* CONFIG_GPIOLIB */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 147775a94bc..e4f9004e710 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; +extern struct clk sh7372_fsidiva_clk; +extern struct clk sh7372_fsidivb_clk; #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 4cd3cae38e7..30b2f400666 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), - INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), + INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0), INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 73fb1a551ec..608a1372b17 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -75,14 +75,14 @@ void __init ux500_init_irq(void) static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) { /* wait for the operation to complete */ - while (readl(reg) & mask) + while (readl_relaxed(reg) & mask) ; } static inline void ux500_cache_sync(void) { void __iomem *base = __io_address(UX500_L2CC_BASE); - writel(0, base + L2X0_CACHE_SYNC); + writel_relaxed(0, base + L2X0_CACHE_SYNC); ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void) uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ /* invalidate all ways */ - writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); ux500_cache_sync(); } diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h index ebd8a2543d3..7d8e069ad51 100644 --- a/arch/arm/mach-versatile/include/mach/vmalloc.h +++ b/arch/arm/mach-versatile/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd8000000 +#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index c2e405a9e02..fd25ccd7272 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = { static void __init ct_ca9x4_map_io(void) { +#ifdef CONFIG_LOCAL_TIMERS twd_base = MMIO_P2V(A9_MPCORE_TWD); +#endif v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4dd0646e85..ac6a36142fc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) * fragmentation of the DMA space, and also prevents allocations * smaller than a section from crossing a section boundary. */ - bit = fls(size - 1) + 1; + bit = fls(size - 1); if (bit > SECTION_SHIFT) bit = SECTION_SHIFT; align = 1 << bit; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 17e7b0b57e4..55c17a6fb22 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, */ if (pfn_valid(pfn)) { printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n" - KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" - KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n"); + "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" + "will fail in the next kernel release. Please fix your driver.\n"); WARN_ON(1); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 02d98901805..3a705c7877d 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -12,15 +12,7 @@ #include <mach/hardware.h> #include <mach/devices-common.h> -#ifdef SDMA_IS_MERGED #include <mach/sdma.h> -#else -struct sdma_platform_data { - int sdma_version; - char *cpu_name; - int to_version; -}; -#endif struct imx_imx_sdma_data { resource_size_t iobase; diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index e48340ec331..17f724c9452 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) imx21_cspi_data_entry(0, 1), imx21_cspi_data_entry(1, 2), +}; #endif #ifdef CONFIG_ARCH_MX25 diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index aedf9c1d645..63cdc6025bd 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini + * Copyright (C) 2010 Linus Walleij for ST-Ericsson * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -16,11 +17,13 @@ #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> +#include <linux/cnt32_to_63.h> +#include <linux/timer.h> #include <asm/mach/time.h> #include <plat/mtu.h> -void __iomem *mtu_base; /* ssigned by machine code */ +void __iomem *mtu_base; /* Assigned by machine code */ /* * Kernel assumes that sched_clock can be called early @@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = { /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by OMAP implementation.) + * better resolution when scheduling the kernel. + * + * Because the hardware timer period may be quite short + * (32.3 secs on the 133 MHz MTU timer selection on ux500) + * and because cnt32_to_63() needs to be called at least once per + * half period to work properly, a kernel keepwarm() timer is set up + * to ensure this requirement is always met. + * + * Also the sched_clock timer will wrap around at some point, + * here we set it to run continously for a year. */ +#define SCHED_CLOCK_MIN_WRAP 3600*24*365 +static struct timer_list cnt32_to_63_keepwarm_timer; +static u32 sched_mult; +static u32 sched_shift; + unsigned long long notrace sched_clock(void) { - return clocksource_cyc2ns(nmdk_clksrc.read( - &nmdk_clksrc), - nmdk_clksrc.mult, - nmdk_clksrc.shift); + u64 cycles; + + if (unlikely(!mtu_base)) + return 0; + + cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0))); + /* + * sched_mult is guaranteed to be even so will + * shift out bit 63 + */ + return (cycles * sched_mult) >> sched_shift; +} + +/* Just kick sched_clock every so often */ +static void cnt32_to_63_keepwarm(unsigned long data) +{ + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); + (void) sched_clock(); +} + +/* + * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm + * once in half a 32bit timer wrap interval. + */ +static void __init nmdk_sched_clock_init(unsigned long rate) +{ + u32 v; + unsigned long delta; + u64 days; + + /* Find the apropriate mult and shift factors */ + clocks_calc_mult_shift(&sched_mult, &sched_shift, + rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP); + /* We need to multiply by an even number to get rid of bit 63 */ + if (sched_mult & 1) + sched_mult++; + + /* Let's see what we get, take max counter and scale it */ + days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift; + do_div(days, NSEC_PER_SEC); + do_div(days, (3600*24)); + + pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n", + (64 - sched_shift), rate, (unsigned long) days); + + /* + * Program a timer to kick us at half 32bit wraparound + * Formula: seconds per wrap = (2^32) / f + */ + v = 0xFFFFFFFFUL / rate; + /* We want half of the wrap time to keep cnt32_to_63 warm */ + v /= 2; + pr_debug("sched_clock: prescaled timer rate: %lu Hz, " + "initialize keepwarm timer every %d seconds\n", rate, v); + /* Convert seconds to jiffies */ + delta = msecs_to_jiffies(v*1000); + setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta); + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta)); } /* Clockevent device: use one-shot mode */ @@ -161,13 +230,15 @@ void __init nmdk_timer_init(void) writel(0, mtu_base + MTU_BGLR(0)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); - /* Now the scheduling clock is ready */ + /* Now the clock source is ready */ nmdk_clksrc.read = nmdk_read_timer; if (clocksource_register(&nmdk_clksrc)) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); + nmdk_sched_clock_init(rate); + /* Timer 1 is used for events */ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 6f42a18b8aa..fc819120978 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void) if (!size) return; - paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT); + paddr = memblock_alloc(size, SZ_1M); if (!paddr) { pr_err("%s: failed to reserve %x bytes\n", __func__, size); return; } + memblock_free(paddr, size); + memblock_remove(paddr, size); omap_dsp_phys_mempool_base = paddr; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index f5c5b8da9a8..a863f5546a6 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -174,7 +174,7 @@ static inline void omap_enable_channel_irq(int lch); #ifdef CONFIG_ARCH_OMAP15XX /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ -int omap_dma_in_1510_mode(void) +static int omap_dma_in_1510_mode(void) { return enable_1510_mode; } @@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch) dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch)); dma_write(1 << ch, IRQSTATUS_L0); + /* read back the register to flush the write */ + dma_read(IRQSTATUS_L0); /* If the ch is not chained then chain_id will be -1 */ if (dma_chan[ch].chain_id != -1) { diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index c8dae02f070..b3e0bad9b77 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -31,20 +31,8 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MDR1_DISABLE 0x07 -#define OMAP_MDR1_MODE13X 0x03 -#define OMAP_MDR1_MODE16X 0x00 #define OMAP_MODE13X_SPEED 230400 -/* - * LCR = 0XBF: Switch to Configuration Mode B. - * In configuration mode b allow access - * to EFR,DLL,DLH. - * Reference OMAP TRM Chapter 17 - * Section: 1.4.3 Mode Selection - */ -#define OMAP_UART_LCR_CONF_MDB 0XBF - /* WER = 0x7F * Enable module level wakeup in WER reg */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e2c8eebe6b3..93641df487a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -270,7 +270,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) _omap_sram_reprogram_clock(dpllctl, ckctl); } -int __init omap1_sram_init(void) +static int __init omap1_sram_init(void) { _omap_sram_reprogram_clock = omap_sram_push(omap1_sram_reprogram_clock, diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h index 3ebfef72b4e..cc99163e73f 100644 --- a/arch/arm/plat-orion/include/plat/pcie.h +++ b/arch/arm/plat-orion/include/plat/pcie.h @@ -11,12 +11,15 @@ #ifndef __PLAT_PCIE_H #define __PLAT_PCIE_H +struct pci_bus; + u32 orion_pcie_dev_id(void __iomem *base); u32 orion_pcie_rev(void __iomem *base); int orion_pcie_link_up(void __iomem *base); int orion_pcie_x4_mode(void __iomem *base); int orion_pcie_get_local_bus_nr(void __iomem *base); void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_reset(void __iomem *base); void orion_pcie_setup(void __iomem *base, struct mbus_dram_target_info *dram); int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 779553a1595..af2d733c50b 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iomem *base, u32 mask; /* - * soft reset PCIe unit - */ - orion_pcie_reset(base); - - /* * Point PCIe unit MBUS decode windows to DRAM space. */ orion_pcie_setup_wins(base, dram); diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index e49c5b6fc4e..1ab332e37d7 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -17,6 +17,9 @@ /* Require clock free running */ #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI * @max_speed: the maximum speed supported diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9793544a6ac..704175b0573 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index db9e9e477ec..72457afd625 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 8ea663a438b..c3972b645d1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } |