diff options
Diffstat (limited to 'arch/arm')
28 files changed, 171 insertions, 72 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a19a5266d5f..8ae3d48d504 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION - select GENERIC_ATOMIC64 if (!CPU_32v6K) + select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index ada6359160e..772f95f1aec 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* - * Set priority on all interrupts. + * Set priority on all global interrupts. */ - for (i = 0; i < max_irq; i += 4) + for (i = 32; i < max_irq; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* - * Disable all interrupts. + * Disable all interrupts. Leave the PPI and SGIs alone + * as these enables are banked registers. */ - for (i = 0; i < max_irq; i += 32) + for (i = 32; i < max_irq; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); /* @@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) { + void __iomem *dist_base; + int i; + if (gic_nr >= MAX_GIC_NR) BUG(); + dist_base = gic_data[gic_nr].dist_base; + BUG_ON(!dist_base); + gic_data[gic_nr].cpu_base = base; + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + writel(0xf0, base + GIC_CPU_PRIMASK); writel(1, base + GIC_CPU_CTRL); } diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 6700c7fc7eb..21fa272301f 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -75,7 +75,7 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(1) USB (USBR) IT8152_PD_IRQ(0) Audio controller (ACR) */ -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) +#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 54593b0c241..21e3a4ab3b8 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, breakpoint_handler(addr, regs); break; case ARM_ENTRY_ASYNC_WATCHPOINT: - WARN_ON("Asynchronous watchpoint exception taken. " - "Debugging results may be unreliable"); + WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, regs); break; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 49643b1467e..07a50357492 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, enum armv7_counters counter) { - int ret; + int ret = 0; if (counter == ARMV7_CYCLE_COUNTER) ret = pmnc & ARMV7_FLAG_C; diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 20b7411e47f..c2e112e1a05 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); /* check current frame pointer is within bounds */ if (fp < (low + 12) || fp + 4 >= high) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cda78d59aa3..446aee97436 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN]; - sprint_symbol(sym1, where); - sprint_symbol(sym2, from); - printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2); + printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 2a161765f6d..d2cb0b3c987 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__, frame->pc, frame->lr, frame->sp); diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 3a5961d3f3b..5e31b2b25da 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,5 +1,13 @@ -/* - * arch/arm/mach-ep93xx/include/mach/dma.h +/** + * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine + * + * The EP93xx DMA M2P subsystem handles DMA transfers between memory and + * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. + * See chapter 10 of the EP93xx users guide for full details on the DMA M2P + * engine. + * + * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. + * */ #ifndef __ASM_ARCH_DMA_H @@ -8,12 +16,34 @@ #include <linux/list.h> #include <linux/types.h> +/** + * struct ep93xx_dma_buffer - Information about a buffer to be transferred + * using the DMA M2P engine + * + * @list: Entry in DMA buffer list + * @bus_addr: Physical address of the buffer + * @size: Size of the buffer in bytes + */ struct ep93xx_dma_buffer { struct list_head list; u32 bus_addr; u16 size; }; +/** + * struct ep93xx_dma_m2p_client - Information about a DMA M2P client + * + * @name: Unique name for this client + * @flags: Client flags + * @cookie: User data to pass to callback functions + * @buffer_started: Non NULL function to call when a transfer is started. + * The arguments are the user data cookie and the DMA + * buffer which is starting. + * @buffer_finished: Non NULL function to call when a transfer is completed. + * The arguments are the user data cookie, the DMA buffer + * which has completed, and a boolean flag indicating if + * the transfer had an error. + */ struct ep93xx_dma_m2p_client { char *name; u8 flags; @@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client { struct ep93xx_dma_buffer *buf, int bytes, int error); - /* Internal to the DMA code. */ + /* private: Internal use only */ void *channel; }; +/* DMA M2P ports */ #define EP93XX_DMA_M2P_PORT_I2S1 0x00 #define EP93XX_DMA_M2P_PORT_I2S2 0x01 #define EP93XX_DMA_M2P_PORT_AAC1 0x02 @@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client { #define EP93XX_DMA_M2P_PORT_UART3 0x08 #define EP93XX_DMA_M2P_PORT_IRDA 0x09 #define EP93XX_DMA_M2P_PORT_MASK 0x0f -#define EP93XX_DMA_M2P_TX 0x00 -#define EP93XX_DMA_M2P_RX 0x10 -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +/* DMA M2P client flags */ +#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ +#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ + +/* + * DMA M2P client error handling flags. See the EP93xx users guide + * documentation on the DMA M2P CONTROL register for more details + */ +#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ +#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ +#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ + +/** + * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P + * subsystem + * + * @m2p: Client information to register + * returns 0 on success + * + * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA + * client + */ +int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P + * subsystem + * + * @m2p: Client to unregister + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + */ void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * If the current or next transfer positions are free on the M2P client then + * the transfer is started immediately. If not, the transfer is added to the + * list of pending transfers. This function must not be called from the + * buffer_finished callback for an M2P channel. + * + */ void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list + * for an M2P channel + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * This function must only be called from the buffer_finished callback for an + * M2P channel. It is commonly used to add the next transfer in a chained list + * of DMA transfers. + */ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client + * + * @m2p: DMA client to flush transfers on + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + * + */ void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 51ff23b72d3..3688123b5ad 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || - rev == MV88F6281_REV_A1)) || - (dev == MV88F6282_DEV_ID)) - return 200000000; + if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) + if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) + return 200000000; return 166666667; } diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 4aa86e4a152..a31c9499ab3 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index d3ea1b6c8a0..285edab776e 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num) pr_err("Failed to power up HDD%d\n", i + 1); } } - -/***************************************************************************** - * Timer - ****************************************************************************/ - -static void lacie_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer lacie_v2_timer = { - .init = lacie_v2_timer_init, -}; diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h index af521315b87..fc64f578536 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.h +++ b/arch/arm/mach-kirkwood/lacie_v2-common.h @@ -13,6 +13,4 @@ void lacie_v2_register_flash(void); void lacie_v2_register_i2c_devices(void); void lacie_v2_hdd_power_init(int hdd_num); -extern struct sys_timer lacie_v2_timer; - #endif diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 065187d177c..27901f702fe 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 5ea66f1f417..65ee21fd2f3 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index a1b45d501ae..93afd3c8bfd 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 8be09a0ce4a..3587a281d99 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -27,6 +27,10 @@ #include "mpp.h" #include "tsx1x-common.h" +/* for the PCIe reset workaround */ +#include <plat/pcie.h> + + #define QNAP_TS41X_JUMPER_JP1 45 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { @@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void) static int __init ts41x_pci_init(void) { - if (machine_is_ts41x()) + if (machine_is_ts41x()) { + /* + * Without this explicit reset, the PCIe SATA controller + * (Marvell 88sx7042/sata_mv) is known to stop working + * after a few minutes. + */ + orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + kirkwood_pcie_init(KW_PCIE0); + } return 0; } diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h index f43a68b213f..8a3b56dfd35 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void) #ifdef CONFIG_CPU_MMP2 static inline int cpu_is_mmp2(void) { - return (((cpu_readid_id() >> 8) & 0xff) == 0x58); + return (((read_cpuid_id() >> 8) & 0xff) == 0x58); +} #else #define cpu_is_mmp2() (0) #endif diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 354ac514eb8..84db2dfc475 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index bc4c3b9aaf8..db485d3b814 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) /* Initialize gpiolib. */ orion_gpio_init(); - while (mode->mpp >= 0) { + for ( ; mode->mpp >= 0; mode++) { u32 *reg; int num_type; int shift; @@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) orion_gpio_set_unused(mode->mpp); orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO)); - - mode++; } writel(mpp_0_7_ctrl, MPP_0_7_CTRL); diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 16f1bd5324b..c1c1cd04bdd 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { static struct resource ts78xx_ts_nand_resources = { .start = TS_NAND_DATA, .end = TS_NAND_DATA + 4, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct platform_device ts78xx_ts_nand_device = { diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index ac5598ce972..d34b99febeb 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -476,8 +476,6 @@ static void __init cmx2xx_init(void) static void __init cmx2xx_init_irq(void) { - pxa27x_init_irq(); - if (cpu_is_pxa25x()) { pxa25x_init_irq(); cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 4b521e045d7..ffa50e633ee 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -116,7 +116,7 @@ static struct platform_device smc91x_device = { }, }; -#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE) +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static uint16_t lcd_power_on[] = { /* single frame */ SMART_CMD_NOOP, diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index c2e405a9e02..fd25ccd7272 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = { static void __init ct_ca9x4_map_io(void) { +#ifdef CONFIG_LOCAL_TIMERS twd_base = MMIO_P2V(A9_MPCORE_TWD); +#endif v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4dd0646e85..ac6a36142fc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) * fragmentation of the DMA space, and also prevents allocations * smaller than a section from crossing a section boundary. */ - bit = fls(size - 1) + 1; + bit = fls(size - 1); if (bit > SECTION_SHIFT) bit = SECTION_SHIFT; align = 1 << bit; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 6f42a18b8aa..fc819120978 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void) if (!size) return; - paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT); + paddr = memblock_alloc(size, SZ_1M); if (!paddr) { pr_err("%s: failed to reserve %x bytes\n", __func__, size); return; } + memblock_free(paddr, size); + memblock_remove(paddr, size); omap_dsp_phys_mempool_base = paddr; } diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h index 3ebfef72b4e..cc99163e73f 100644 --- a/arch/arm/plat-orion/include/plat/pcie.h +++ b/arch/arm/plat-orion/include/plat/pcie.h @@ -11,12 +11,15 @@ #ifndef __PLAT_PCIE_H #define __PLAT_PCIE_H +struct pci_bus; + u32 orion_pcie_dev_id(void __iomem *base); u32 orion_pcie_rev(void __iomem *base); int orion_pcie_link_up(void __iomem *base); int orion_pcie_x4_mode(void __iomem *base); int orion_pcie_get_local_bus_nr(void __iomem *base); void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_reset(void __iomem *base); void orion_pcie_setup(void __iomem *base, struct mbus_dram_target_info *dram); int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 779553a1595..af2d733c50b 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iomem *base, u32 mask; /* - * soft reset PCIe unit - */ - orion_pcie_reset(base); - - /* * Point PCIe unit MBUS decode windows to DRAM space. */ orion_pcie_setup_wins(base, dram); |