diff options
Diffstat (limited to 'arch/arm')
136 files changed, 11151 insertions, 1453 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c6d2b198875..5d60508472f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -217,6 +217,7 @@ config ARCH_REALVIEW select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS + select ARCH_WANT_OPTIONAL_GPIOLIB help This enables support for ARM Ltd RealView boards. @@ -229,6 +230,7 @@ config ARCH_VERSATILE select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS + select ARCH_WANT_OPTIONAL_GPIOLIB help This enables support for ARM Ltd Versatile board. @@ -493,10 +495,18 @@ config ARCH_W90X900 select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB select GENERIC_GPIO + select HAVE_CLK select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. + Support for Nuvoton (Winbond logic dept.) ARM9 processor, + At present, the w90x900 has been renamed nuc900, regarding + the ARM series product line, you can login the following + link address to know more. + + <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ + ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" @@ -1068,6 +1078,11 @@ config HIGHMEM If unsure, say n. +config HIGHPTE + bool "Allocate 2nd-level pagetables from highmem" + depends on HIGHMEM + depends on !OUTER_CACHE + source "mm/Kconfig" config LEDS diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a71fd941ade..a89e4734b8f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C_PORT - depends on DEBUG_LL && PLAT_S3C - bool "Kernel low-level debugging messages via S3C UART" - help - Say Y here if you want debug print routines to go to one of the - S3C internal UARTs. The chosen UART must have been configured - before it is used. - config DEBUG_S3C_UART depends on PLAT_S3C int "S3C UART to use for low-level debug" diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig new file mode 100644 index 00000000000..601e7f3d5e9 --- /dev/null +++ b/arch/arm/configs/cpu9260_defconfig @@ -0,0 +1,1338 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc3 +# Tue Jul 14 14:57:55 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + +# +# AT91SAM9260 / AT91SAM9XE Board Type +# +# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_MACH_CAM60 is not set +# CONFIG_MACH_SAM9_L9260 is not set +# CONFIG_MACH_AFEB9260 is not set +# CONFIG_MACH_USB_A9260 is not set +# CONFIG_MACH_QIL_A9260 is not set +CONFIG_MACH_CPU9260=y + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_AT91SAM9 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig new file mode 100644 index 00000000000..b5b9cbbc697 --- /dev/null +++ b/arch/arm/configs/cpu9g20_defconfig @@ -0,0 +1,1328 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc3 +# Tue Jul 14 15:03:43 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91SAM9G20=y +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9G20 Board Type +# +# CONFIG_MACH_AT91SAM9G20EK is not set +CONFIG_MACH_CPU9G20=y + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_AT91SAM9 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig new file mode 100644 index 00000000000..4901827253f --- /dev/null +++ b/arch/arm/configs/cpuat91_defconfig @@ -0,0 +1,1316 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc3 +# Tue Jul 14 14:45:01 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set +CONFIG_MACH_CPUAT91=y + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_AT91RM9200 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66f239..605a8462f17 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # -# AT91RM9200 Implementations +# AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# IPMI +# Memory mapped GPIO expanders: # -# CONFIG_IPMI_HANDLER is not set # -# Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver +# PCI GPIO expanders: # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# SPI GPIO expanders: # -# CONFIG_AT91_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Misc devices +# Sonics Silicon Backplane # +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set # -# USB HID Boot Protocol drivers +# also be needed; see USB_STORAGE Help for more info # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices +# USB port drivers # -# CONFIG_USB_DABUSB is not set +# CONFIG_USB_SERIAL is not set # -# Video4Linux support is needed for USB Multimedia device support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB Network Adapters +# OTG and related infrastructure # -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB port drivers +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Serial Converter support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_SERIAL is not set +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB Miscellaneous drivers +# RTC interfaces # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# USB DSL modem support +# SPI RTC drivers # # -# USB Gadget Support +# Platform RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# MMC/SD Card support +# on-CPU RTC drivers # -# CONFIG_MMC is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2d58b8fe59b..b49810461e4 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y +CONFIG_MACH_MINI2440=y # # S3C2442 Machines @@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 2e8fa50e9a0..32860609e05 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 07dfb98df4f..9d32faef05f 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_S3C_PORT is not set CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e12114..4762d900129 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 00:16:59 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +79,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,20 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 39c8bc1a006..d74265cffd8 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -11,4 +11,38 @@ extern void mcount(void); #endif +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) +/* + * return_address uses walk_stackframe to do it's work. If both + * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind + * information. For this to work in the function tracer many functions would + * have to be marked with __notrace. So for now just depend on + * !CONFIG_ARM_UNWIND. + */ + +void *return_address(unsigned int); + +#else + +extern inline void *return_address(unsigned int level) +{ + return NULL; +} + +#endif + +#define HAVE_ARCH_CALLER_ADDR + +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 ((unsigned long)return_address(1)) +#define CALLER_ADDR2 ((unsigned long)return_address(2)) +#define CALLER_ADDR3 ((unsigned long)return_address(3)) +#define CALLER_ADDR4 ((unsigned long)return_address(4)) +#define CALLER_ADDR5 ((unsigned long)return_address(5)) +#define CALLER_ADDR6 ((unsigned long)return_address(6)) + +#endif /* ifndef __ASSEMBLY__ */ + #endif /* _ASM_ARM_FTRACE */ diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h index 4da332b0314..b490ecc79de 100644 --- a/arch/arm/include/asm/mach/mmc.h +++ b/arch/arm/include/asm/mach/mmc.h @@ -10,6 +10,8 @@ struct mmc_platform_data { unsigned int ocr_mask; /* available voltages */ u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); + int gpio_wp; + int gpio_cd; }; #endif diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index be962c1349c..9c746af1bf6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -12,7 +12,7 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 3dcd64bf182..b12cc98bbe0 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); #define pgd_alloc(mm) get_pgd_slow(mm) #define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) +#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO) + /* * Allocate one PTE table. * @@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) { pte_t *pte; - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(PGALLOC_GFP); if (pte) { clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE); pte += PTRS_PER_PTE; @@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr) { struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); +#ifdef CONFIG_HIGHPTE + pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0); +#else + pte = alloc_pages(PGALLOC_GFP, 0); +#endif if (pte) { - void *page = page_address(pte); - clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); + if (!PageHighMem(pte)) { + void *page = page_address(pte); + clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); + } pgtable_page_ctor(pte); } diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d6416bd..201ccaa11f6 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -162,10 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val); * entries are stored 1024 bytes below. */ #define L_PTE_PRESENT (1 << 0) -#define L_PTE_FILE (1 << 1) /* only when !PRESENT */ #define L_PTE_YOUNG (1 << 1) -#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */ -#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */ +#define L_PTE_FILE (1 << 2) /* only when !PRESENT */ #define L_PTE_DIRTY (1 << 6) #define L_PTE_WRITE (1 << 7) #define L_PTE_USER (1 << 8) @@ -264,10 +262,19 @@ extern struct page *empty_zero_page; #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) #define pte_page(pte) (pfn_to_page(pte_pfn(pte))) #define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) + +#define pte_offset_map(dir,addr) (__pte_map(dir, KM_PTE0) + __pte_index(addr)) +#define pte_offset_map_nested(dir,addr) (__pte_map(dir, KM_PTE1) + __pte_index(addr)) +#define pte_unmap(pte) __pte_unmap(pte, KM_PTE0) +#define pte_unmap_nested(pte) __pte_unmap(pte, KM_PTE1) + +#ifndef CONFIG_HIGHPTE +#define __pte_map(dir,km) pmd_page_vaddr(*(dir)) +#define __pte_unmap(pte,km) do { } while (0) +#else +#define __pte_map(dir,km) ((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE) +#define __pte_unmap(pte,km) kunmap_atomic((pte - PTRS_PER_PTE), km) +#endif #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) @@ -285,15 +292,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -384,16 +382,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <- type --> 0 0 0 * - * We support up to 32GB of swap on 4k machines + * This gives us up to 63 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 3 +#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <----------------------- offset ------------------------> 1 0 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 3) +#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 29 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 4f8848260ee..e20d80539b4 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -73,7 +73,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .flags = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ @@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread); #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 #define TIF_FREEZE 19 +#define TIF_RESTORE_SIGMASK 20 #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) @@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread); #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0e97b8cb77d..9122c9ee18f 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -360,8 +360,8 @@ #define __NR_readlinkat (__NR_SYSCALL_BASE+332) #define __NR_fchmodat (__NR_SYSCALL_BASE+333) #define __NR_faccessat (__NR_SYSCALL_BASE+334) - /* 335 for pselect6 */ - /* 336 for ppoll */ +#define __NR_pselect6 (__NR_SYSCALL_BASE+335) +#define __NR_ppoll (__NR_SYSCALL_BASE+336) #define __NR_unshare (__NR_SYSCALL_BASE+337) #define __NR_set_robust_list (__NR_SYSCALL_BASE+338) #define __NR_get_robust_list (__NR_SYSCALL_BASE+339) @@ -372,7 +372,7 @@ #define __NR_vmsplice (__NR_SYSCALL_BASE+343) #define __NR_move_pages (__NR_SYSCALL_BASE+344) #define __NR_getcpu (__NR_SYSCALL_BASE+345) - /* 346 for epoll_pwait */ +#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) #define __NR_kexec_load (__NR_SYSCALL_BASE+347) #define __NR_utimensat (__NR_SYSCALL_BASE+348) #define __NR_signalfd (__NR_SYSCALL_BASE+349) @@ -432,6 +432,7 @@ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) #define __ARCH_WANT_SYS_TIME diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ff89d0b3abc..3213c9382b1 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE CFLAGS_REMOVE_ftrace.o = -pg endif +CFLAGS_REMOVE_return_address.o = -pg + # Object file lists. obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \ - process.o ptrace.o setup.o signal.o \ + process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o obj-$(CONFIG_ISA_DMA_API) += dma.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index f776e72a4cb..ecfa98954d1 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -81,7 +81,7 @@ CALL(sys_ni_syscall) /* was sys_ssetmask */ /* 70 */ CALL(sys_setreuid16) CALL(sys_setregid16) - CALL(sys_sigsuspend_wrapper) + CALL(sys_sigsuspend) CALL(sys_sigpending) CALL(sys_sethostname) /* 75 */ CALL(sys_setrlimit) @@ -188,7 +188,7 @@ CALL(sys_rt_sigpending) CALL(sys_rt_sigtimedwait) CALL(sys_rt_sigqueueinfo) - CALL(sys_rt_sigsuspend_wrapper) + CALL(sys_rt_sigsuspend) /* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64)) CALL(ABI(sys_pwrite64, sys_oabi_pwrite64)) CALL(sys_chown16) @@ -344,8 +344,8 @@ CALL(sys_readlinkat) CALL(sys_fchmodat) CALL(sys_faccessat) -/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */ - CALL(sys_ni_syscall) /* eventually ppoll */ +/* 335 */ CALL(sys_pselect6) + CALL(sys_ppoll) CALL(sys_unshare) CALL(sys_set_robust_list) CALL(sys_get_robust_list) @@ -355,7 +355,7 @@ CALL(sys_vmsplice) CALL(sys_move_pages) /* 345 */ CALL(sys_getcpu) - CALL(sys_ni_syscall) /* eventually epoll_pwait */ + CALL(sys_epoll_pwait) CALL(sys_kexec_load) CALL(sys_utimensat) CALL(sys_signalfd) diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index 99995c2b231..769abe15cf9 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread) static int crunch_enabled(u32 devcfg) { - return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE); + return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA); } static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) @@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) break; case THREAD_NOTIFY_SWITCH: - devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); + devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG); if (crunch_enabled(devcfg) || crunch_owner == crunch_state) { - devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; + /* + * We don't use ep93xx_syscon_swlocked_write() here + * because we are on the context switch path and + * preemption is already disabled. + */ + devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG); + __raw_writel(devcfg, EP93XX_SYSCON_DEVCFG); } break; } diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e5097a41..bfa7f0af7ed 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -373,16 +373,6 @@ sys_clone_wrapper: b sys_clone ENDPROC(sys_clone_wrapper) -sys_sigsuspend_wrapper: - add r3, sp, #S_OFF - b sys_sigsuspend -ENDPROC(sys_sigsuspend_wrapper) - -sys_rt_sigsuspend_wrapper: - add r2, sp, #S_OFF - b sys_rt_sigsuspend -ENDPROC(sys_rt_sigsuspend_wrapper) - sys_sigreturn_wrapper: add r0, sp, #S_OFF b sys_sigreturn diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 096f600dc8d..b7c3490eaa2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -98,17 +98,6 @@ unlock: return 0; } -/* Handle bad interrupts */ -static struct irq_desc bad_irq_desc = { - .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), -}; - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (irq >= NR_IRQS) - handle_bad_irq(irq, &bad_irq_desc); - else + if (unlikely(irq >= NR_IRQS)) { + if (printk_ratelimit()) + printk(KERN_WARNING "Bad IRQ%u\n", irq); + ack_bad_irq(irq); + } else { generic_handle_irq(irq); + } /* AT91 specific workaround */ irq_finish(irq); @@ -165,10 +157,6 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; -#ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.node = smp_processor_id(); -#endif init_arch_irq(); } diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c new file mode 100644 index 00000000000..df246da4cec --- /dev/null +++ b/arch/arm/kernel/return_address.c @@ -0,0 +1,71 @@ +/* + * arch/arm/kernel/return_address.c + * + * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * for Pengutronix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/module.h> + +#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) +#include <linux/sched.h> + +#include <asm/stacktrace.h> + +struct return_address_data { + unsigned int level; + void *addr; +}; + +static int save_return_addr(struct stackframe *frame, void *d) +{ + struct return_address_data *data = d; + + if (!data->level) { + data->addr = (void *)frame->lr; + + return 1; + } else { + --data->level; + return 0; + } +} + +void *return_address(unsigned int level) +{ + struct return_address_data data; + struct stackframe frame; + register unsigned long current_sp asm ("sp"); + + data.level = level + 1; + + frame.fp = (unsigned long)__builtin_frame_address(0); + frame.sp = current_sp; + frame.lr = (unsigned long)__builtin_return_address(0); + frame.pc = (unsigned long)return_address; + + walk_stackframe(&frame, save_return_addr, &data); + + if (!data.level) + return data.addr; + else + return NULL; +} + +#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ + +#if defined(CONFIG_ARM_UNWIND) +#warning "TODO: return_address should use unwind tables" +#endif + +void *return_address(unsigned int level) +{ + return NULL; +} + +#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */ + +EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 93bb4247b7e..e27ee1f701d 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; -static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall); - /* * atomically swap in the new signal mask, and wait for a signal. */ -asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs) +asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) { - sigset_t saveset; - mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs->ARM_r0 = -EINTR; - - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(&saveset, regs, 0)) - return regs->ARM_r0; - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - regs->ARM_r0 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(&saveset, regs, 0)) - return regs->ARM_r0; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_restore_sigmask(); + return -ERESTARTNOHAND; } asmlinkage int @@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs) /* * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs * regs, int syscall) @@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, if (ret != 0) { force_sigsegv(sig, tsk); - return; + return ret; } /* @@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(&tsk->sighand->siglock); + return 0; } /* @@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ -static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) +static void do_signal(struct pt_regs *regs, int syscall) { struct k_sigaction ka; siginfo_t info; @@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) * if so. */ if (!user_mode(regs)) - return 0; + return; if (try_to_freeze()) goto no_signal; @@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - handle_signal(signr, &ka, &info, oldset, regs, syscall); + sigset_t *oldset; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) { + /* + * A signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } single_step_set(current); - return 1; + return; } no_signal: @@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) regs->ARM_r0 == -ERESTARTNOINTR) { setup_syscall_restart(regs); } + + /* If there's no signal to deliver, we just put the saved sigmask + * back. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } } single_step_set(current); - return 0; } asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall) { if (thread_flags & _TIF_SIGPENDING) - do_signal(¤t->blocked, regs, syscall); + do_signal(regs, syscall); } diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 9f444e5cc16..20b7411e47f 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -21,7 +21,7 @@ * Note that with framepointer enabled, even the leaf functions have the same * prologue and epilogue, therefore we can ignore the LR value in this case. */ -int unwind_frame(struct stackframe *frame) +int notrace unwind_frame(struct stackframe *frame) { unsigned long high, low; unsigned long fp = frame->fp; @@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame) } #endif -void walk_stackframe(struct stackframe *frame, +void notrace walk_stackframe(struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data) { while (1) { diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4340bf3d2c8..69371028a20 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/page.h> OUTPUT_ARCH(arm) ENTRY(stext) @@ -63,7 +64,7 @@ SECTIONS usr/built-in.o(.init.ramfs) __initramfs_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __per_cpu_load = .; __per_cpu_start = .; *(.data.percpu.page_aligned) @@ -73,7 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif } @@ -118,7 +119,7 @@ SECTIONS *(.got) /* Global offset table */ } - RODATA + RO_DATA(PAGE_SIZE) _etext = .; /* End of text and rodata section */ @@ -158,17 +159,17 @@ SECTIONS *(.data.init_task) #ifdef CONFIG_XIP_KERNEL - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; *(.data.nosave) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; /* diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 323b47f2b52..a24d824c428 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -23,6 +23,12 @@ config ARCH_AT91SAM9261 select GENERIC_TIME select GENERIC_CLOCKEVENTS +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select CPU_ARM926T + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + config ARCH_AT91SAM9263 bool "AT91SAM9263" select CPU_ARM926T @@ -41,6 +47,12 @@ config ARCH_AT91SAM9G20 select GENERIC_TIME select GENERIC_CLOCKEVENTS +config ARCH_AT91SAM9G45 + bool "AT91SAM9G45" + select CPU_ARM926T + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + config ARCH_AT91CAP9 bool "AT91CAP9" select CPU_ARM926T @@ -144,6 +156,13 @@ config MACH_YL9200 help Select this if you are using the ucDragon YL-9200 board. +config MACH_CPUAT91 + bool "Eukrea CPUAT91" + depends on ARCH_AT91RM9200 + help + Select this if you are using the Eukrea Electromatique's + CPUAT91 board <http://www.eukrea.com/>. + endif # ---------------------------------------------------------- @@ -205,6 +224,13 @@ config MACH_QIL_A9260 Select this if you are using a Calao Systems QIL-A9260 Board. <http://www.calao-systems.com> +config MACH_CPU9260 + bool "Eukrea CPU9260 board" + depends on ARCH_AT91SAM9260 + help + Select this if you are using a Eukrea Electromatique's + CPU9260 Board <http://www.eukrea.com/> + endif # ---------------------------------------------------------- @@ -224,6 +250,21 @@ endif # ---------------------------------------------------------- +if ARCH_AT91SAM9G10 + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + depends on ARCH_AT91SAM9G10 + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + if ARCH_AT91SAM9263 comment "AT91SAM9263 Board Type" @@ -276,6 +317,29 @@ config MACH_AT91SAM9G20EK help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit. +config MACH_CPU9G20 + bool "Eukrea CPU9G20 board" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G45 + +comment "AT91SAM9G45 Board Type" + +config MACH_AT91SAM9G45EKES + bool "Atmel AT91SAM9G45-EKES Evaluation Kit" + depends on ARCH_AT91SAM9G45 + help + Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. + "ES" at the end of the name means that this board is an + Engineering Sample. + endif # ---------------------------------------------------------- @@ -315,13 +379,13 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) help Enable support for the DataFlash card. config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -383,7 +447,7 @@ config AT91_EARLY_USART2 config AT91_EARLY_USART3 bool "USART3" - depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) + depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45) config AT91_EARLY_USART4 bool "USART4" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index c69ff237fd1..a6ed015d82e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -13,9 +13,11 @@ obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o + obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o @@ -32,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o +obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -40,9 +43,11 @@ obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o +obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o +obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o @@ -54,6 +59,10 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o # AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o +obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o + +# AT91SAM9G45 board-specific support +obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 071a2506a69..3462b815054 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y) zreladdr-y := 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 +else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) + zreladdr-y := 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70410000 else zreladdr-y := 0x20008000 params_phys-y := 0x20000100 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index d74c9ac007e..ee4ea0e720c 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif +/* -------------------------------------------------------------------- + * CF/IDE + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ + defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) + +static struct at91_cf_data cf0_data; + +static struct resource cf0_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_4, + .end = AT91_CHIPSELECT_4 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cf0_device = { + .id = 0, + .dev = { + .platform_data = &cf0_data, + }, + .resource = cf0_resources, + .num_resources = ARRAY_SIZE(cf0_resources), +}; + +static struct at91_cf_data cf1_data; + +static struct resource cf1_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_5, + .end = AT91_CHIPSELECT_5 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cf1_device = { + .id = 1, + .dev = { + .platform_data = &cf1_data, + }, + .resource = cf1_resources, + .num_resources = ARRAY_SIZE(cf1_resources), +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + struct platform_device *pdev; + unsigned long csa; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + + switch (data->chipselect) { + case 4: + at91_set_multi_drive(AT91_PIN_PC8, 0); + at91_set_A_periph(AT91_PIN_PC8, 0); + csa |= AT91_MATRIX_CS4A_SMC_CF1; + cf0_data = *data; + pdev = &cf0_device; + break; + case 5: + at91_set_multi_drive(AT91_PIN_PC9, 0); + at91_set_A_periph(AT91_PIN_PC9, 0); + csa |= AT91_MATRIX_CS5A_SMC_CF2; + cf1_data = *data; + pdev = &cf1_device; + break; + default: + printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", + data->chipselect); + return; + } + + at91_sys_write(AT91_MATRIX_EBICSA, csa); + + if (data->rst_pin) { + at91_set_multi_drive(data->rst_pin, 0); + at91_set_gpio_output(data->rst_pin, 1); + } + + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 0); + at91_set_deglitch(data->irq_pin, 1); + } + + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 0); + at91_set_deglitch(data->det_pin, 1); + } + + at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */ + at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */ + at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */ + + if (data->flags & AT91_CF_TRUE_IDE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) + pdev->name = "pata_at91"; +#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) + pdev->name = "at91_ide"; +#else +#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#endif + else + pdev->name = "at91_cf"; + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_cf(struct at91_cf_data * data) {} +#endif /* -------------------------------------------------------------------- */ /* diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 3acd7d7e6a4..4ecf37996c7 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/cpu.h> #include <mach/at91sam9261.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> @@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = { .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, .type = MT_DEVICE, - }, { + }, +}; + +static struct map_desc at91sam9261_sram_desc[] __initdata = { + { .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), .length = AT91SAM9261_SRAM_SIZE, @@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = { }, }; +static struct map_desc at91sam9g10_sram_desc[] __initdata = { + { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE), + .length = AT91SAM9G10_SRAM_SIZE, + .type = MT_DEVICE, + }, +}; + /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock) /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); + if (cpu_is_at91sam9g10()) + iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); + else + iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); + + at91_arch_reset = at91sam9261_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index b7f23324231..55719a97427 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * AC97 * -------------------------------------------------------------------- */ -#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) +#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct atmel_ac97_data ac97_data; +static struct ac97c_platform_data ac97_data; static struct resource ac97_resources[] = { [0] = { @@ -725,8 +725,8 @@ static struct resource ac97_resources[] = { }; static struct platform_device at91sam9263_ac97_device = { - .name = "ac97c", - .id = 1, + .name = "atmel_ac97c", + .id = 0, .dev = { .dma_mask = &ac97_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = { .num_resources = ARRAY_SIZE(ac97_resources), }; -void __init at91_add_device_ac97(struct atmel_ac97_data *data) +void __init at91_add_device_ac97(struct ac97c_platform_data *data) { if (!data) return; @@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) if (data->reset_pin) at91_set_gpio_output(data->reset_pin, 0); - ac97_data = *ek_data; + ac97_data = *data; platform_device_register(&at91sam9263_ac97_device); } #else -void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} +void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c new file mode 100644 index 00000000000..85166b7e69a --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -0,0 +1,360 @@ +/* + * Chip-specific setup code for the AT91SAM9G45 family + * + * Copyright (C) 2009 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/pm.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/at91sam9g45.h> +#include <mach/at91_pmc.h> +#include <mach/at91_rstc.h> +#include <mach/at91_shdwc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91sam9g45_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE), + .length = AT91SAM9G45_SRAM_SIZE, + .type = MT_DEVICE, + } +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioDE_clk = { + .name = "pioDE_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_PIODE, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_US3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_PWMC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tsc_clk = { + .name = "tsc_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_TSC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ac97_clk = { + .name = "ac97_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_AC97C, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; + +/* One additional fake clock for ohci */ +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 0, + .type = CLK_TYPE_PERIPHERAL, + .parent = &uhphs_clk, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioDE_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &mmc0_clk, + &twi0_clk, + &twi1_clk, + &spi0_clk, + &spi1_clk, + &ssc0_clk, + &ssc1_clk, + &tcb_clk, + &pwm_clk, + &tsc_clk, + &dma_clk, + &uhphs_clk, + &lcdc_clk, + &ac97_clk, + &macb_clk, + &isi_clk, + &udphs_clk, + &mmc1_clk, + // irq0 + &ohci_clk, +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9g45_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91sam9g45_gpio[] = { + { + .id = AT91SAM9G45_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91SAM9G45_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91SAM9G45_ID_PIOC, + .offset = AT91_PIOC, + .clock = &pioC_clk, + }, { + .id = AT91SAM9G45_ID_PIODE, + .offset = AT91_PIOD, + .clock = &pioDE_clk, + }, { + .id = AT91SAM9G45_ID_PIODE, + .offset = AT91_PIOE, + .clock = &pioDE_clk, + } +}; + +static void at91sam9g45_reset(void) +{ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); +} + +static void at91sam9g45_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + + +/* -------------------------------------------------------------------- + * AT91SAM9G45 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91sam9g45_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); + + at91_arch_reset = at91sam9g45_reset; + pm_power_off = at91sam9g45_poweroff; + at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91sam9g45_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9g45_gpio, 5); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller D and E */ + 0, + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ + 0, /* Multimedia Card Interface 0 */ + 6, /* Two-Wire Interface 0 */ + 6, /* Two-Wire Interface 1 */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ + 0, /* Pulse Width Modulation Controller */ + 0, /* Touch Screen Controller */ + 0, /* DMA Controller */ + 2, /* USB Host High Speed port */ + 3, /* LDC Controller */ + 5, /* AC97 Controller */ + 3, /* Ethernet */ + 0, /* Image Sensor Interface */ + 2, /* USB Device High speed port */ + 0, + 0, /* Multimedia Card Interface 1 */ + 0, + 0, /* Advanced Interrupt Controller (IRQ0) */ +}; + +void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91sam9g45_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c new file mode 100644 index 00000000000..d746e8621bc --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -0,0 +1,1230 @@ +/* + * On-Chip devices setup code for the AT91SAM9G45 family + * + * Copyright (C) 2009 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/i2c-gpio.h> + +#include <linux/fb.h> +#include <video/atmel_lcdc.h> + +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9g45.h> +#include <mach/at91sam9g45_matrix.h> +#include <mach/at91sam9_smc.h> + +#include "generic.h" + + +/* -------------------------------------------------------------------- + * USB Host (OHCI) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = DMA_BIT_MASK(32); +static struct at91_usbh_data usbh_ohci_data; + +static struct resource usbh_ohci_resources[] = { + [0] = { + .start = AT91SAM9G45_OHCI_BASE, + .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_UHPHS, + .end = AT91SAM9G45_ID_UHPHS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_ohci_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usbh_ohci_data, + }, + .resource = usbh_ohci_resources, + .num_resources = ARRAY_SIZE(usbh_ohci_resources), +}; + +void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_ohci_data = *data; + platform_device_register(&at91_usbh_ohci_device); +} +#else +void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB HS Device (Gadget) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE) +static struct resource usba_udc_resources[] = { + [0] = { + .start = AT91SAM9G45_UDPHS_FIFO, + .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_BASE_UDPHS, + .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AT91SAM9G45_ID_UDPHS, + .end = AT91SAM9G45_ID_UDPHS, + .flags = IORESOURCE_IRQ, + }, +}; + +#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ + [idx] = { \ + .name = nam, \ + .index = idx, \ + .fifo_size = maxpkt, \ + .nr_banks = maxbk, \ + .can_dma = dma, \ + .can_isoc = isoc, \ + } + +static struct usba_ep_data usba_udc_ep[] __initdata = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 1024, 2, 1, 1), + EP("ep2", 2, 1024, 2, 1, 1), + EP("ep3", 3, 1024, 3, 1, 0), + EP("ep4", 4, 1024, 3, 1, 0), + EP("ep5", 5, 1024, 3, 1, 1), + EP("ep6", 6, 1024, 3, 1, 1), +}; + +#undef EP + +/* + * pdata doesn't have room for any endpoints, so we need to + * append room for the ones we need right after it. + */ +static struct { + struct usba_platform_data pdata; + struct usba_ep_data ep[7]; +} usba_udc_data; + +static struct platform_device at91_usba_udc_device = { + .name = "atmel_usba_udc", + .id = -1, + .dev = { + .platform_data = &usba_udc_data.pdata, + }, + .resource = usba_udc_resources, + .num_resources = ARRAY_SIZE(usba_udc_resources), +}; + +void __init at91_add_device_usba(struct usba_platform_data *data) +{ + usba_udc_data.pdata.vbus_pin = -EINVAL; + usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); + memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));; + + if (data && data->vbus_pin > 0) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + usba_udc_data.pdata.vbus_pin = data->vbus_pin; + } + + /* Pullup pin is handled internally by USB device peripheral */ + + /* Clocks */ + at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); + at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); + + platform_device_register(&at91_usba_udc_device); +} +#else +void __init at91_add_device_usba(struct usba_platform_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) +static u64 eth_dmamask = DMA_BIT_MASK(32); +static struct at91_eth_data eth_data; + +static struct resource eth_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_EMAC, + .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_EMAC, + .end = AT91SAM9G45_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_eth_device = { + .name = "macb", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = ð_data, + }, + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */ + } + + eth_data = *data; + platform_device_register(&at91sam9g45_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) +static struct atmel_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + [0] = { + .start = NAND_BASE, + .end = NAND_BASE + SZ_256M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9g45_nand_device = { + .name = "atmel_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct atmel_nand_data *data) +{ + unsigned long csa; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + nand_data = *data; + platform_device_register(&at91sam9g45_nand_device); +} +#else +void __init at91_add_device_nand(struct atmel_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +static struct i2c_gpio_platform_data pdata_i2c0 = { + .sda_pin = AT91_PIN_PA20, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PA21, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9g45_twi0_device = { + .name = "i2c-gpio", + .id = 0, + .dev.platform_data = &pdata_i2c0, +}; + +static struct i2c_gpio_platform_data pdata_i2c1 = { + .sda_pin = AT91_PIN_PB10, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PB11, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91sam9g45_twi1_device = { + .name = "i2c-gpio", + .id = 1, + .dev.platform_data = &pdata_i2c1, +}; + +void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) +{ + i2c_register_board_info(i2c_id, devices, nr_devices); + + if (i2c_id == 0) { + at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PA20, 1); + + at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PA21, 1); + + platform_device_register(&at91sam9g45_twi0_device); + } else { + at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PB10, 1); + + at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PB11, 1); + + platform_device_register(&at91sam9g45_twi1_device); + } +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +static struct resource twi0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TWI0, + .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TWI0, + .end = AT91SAM9G45_ID_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_twi0_device = { + .name = "at91_i2c", + .id = 0, + .resource = twi0_resources, + .num_resources = ARRAY_SIZE(twi0_resources), +}; + +static struct resource twi1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TWI1, + .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TWI1, + .end = AT91SAM9G45_ID_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_twi1_device = { + .name = "at91_i2c", + .id = 1, + .resource = twi1_resources, + .num_resources = ARRAY_SIZE(twi1_resources), +}; + +void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) +{ + i2c_register_board_info(i2c_id, devices, nr_devices); + + /* pins used for TWI interface */ + if (i2c_id == 0) { + at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PA20, 1); + + at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PA21, 1); + + platform_device_register(&at91sam9g45_twi0_device); + } else { + at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PB10, 1); + + at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PB11, 1); + + platform_device_register(&at91sam9g45_twi1_device); + } +} +#else +void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SPI0, + .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_SPI0, + .end = AT91SAM9G45_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SPI1, + .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_SPI1, + .end = AT91SAM9G45_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ + + at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); + platform_device_register(&at91sam9g45_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); + platform_device_register(&at91sam9g45_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * LCD Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static u64 lcdc_dmamask = DMA_BIT_MASK(32); +static struct atmel_lcdfb_info lcdc_data; + +static struct resource lcdc_resources[] = { + [0] = { + .start = AT91SAM9G45_LCDC_BASE, + .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_LCDC, + .end = AT91SAM9G45_ID_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_lcdc_device = { + .name = "atmel_lcdfb", + .id = 0, + .dev = { + .dma_mask = &lcdc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &lcdc_data, + }, + .resource = lcdc_resources, + .num_resources = ARRAY_SIZE(lcdc_resources), +}; + +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ + + at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ + at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ + at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ + at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ + + lcdc_data = *data; + platform_device_register(&at91_lcdc_device); +} +#else +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB +static struct resource tcb0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TCB0, + .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TCB, + .end = AT91SAM9G45_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb0_resources, + .num_resources = ARRAY_SIZE(tcb0_resources), +}; + +/* TCB1 begins with TC3 */ +static struct resource tcb1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TCB1, + .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TCB, + .end = AT91SAM9G45_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = tcb1_resources, + .num_resources = ARRAY_SIZE(tcb1_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has one clock and irq for all six TC channels */ + at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); + platform_device_register(&at91sam9g45_tcb0_device); + at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); + platform_device_register(&at91sam9g45_tcb1_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- + * RTC + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct platform_device at91sam9g45_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_rtc(void) +{ + platform_device_register(&at91sam9g45_rtc_device); +} +#else +static void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9g45_rtt_device = { + .name = "at91_rtt", + .id = 0, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9g45_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9g45_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9g45_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * PWM + * --------------------------------------------------------------------*/ + +#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE) +static u32 pwm_mask; + +static struct resource pwm_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_PWMC, + .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_PWMC, + .end = AT91SAM9G45_ID_PWMC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_pwm0_device = { + .name = "atmel_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_mask, + }, + .resource = pwm_resources, + .num_resources = ARRAY_SIZE(pwm_resources), +}; + +void __init at91_add_device_pwm(u32 mask) +{ + if (mask & (1 << AT91_PWM0)) + at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */ + + if (mask & (1 << AT91_PWM1)) + at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */ + + if (mask & (1 << AT91_PWM2)) + at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */ + + if (mask & (1 << AT91_PWM3)) + at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */ + + pwm_mask = mask; + + platform_device_register(&at91sam9g45_pwm0_device); +} +#else +void __init at91_add_device_pwm(u32 mask) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SSC0, + .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_SSC0, + .end = AT91SAM9G45_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PD1, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PD0, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PD2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PD3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PD4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PD5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SSC1, + .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_SSC1, + .end = AT91SAM9G45_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PD14, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PD12, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PD10, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PD11, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PD13, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PD15, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9G45_ID_SSC0: + pdev = &at91sam9g45_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9G45_ID_SSC1: + pdev = &at91sam9g45_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_ATMEL) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91sam9g45_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_US0, + .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_US0, + .end = AT91SAM9G45_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart0_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91sam9g45_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_US1, + .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_US1, + .end = AT91SAM9G45_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart1_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91sam9g45_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_US2, + .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_US2, + .end = AT91SAM9G45_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart2_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91sam9g45_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */ +} + +static struct resource uart3_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_US3, + .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_US3, + .end = AT91SAM9G45_ID_US3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart3_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart3_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91sam9g45_uart3_device = { + .name = "atmel_usart", + .id = 4, + .dev = { + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, + }, + .resource = uart3_resources, + .num_resources = ARRAY_SIZE(uart3_resources), +}; + +static inline void configure_usart3_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */ +} + +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9g45_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9G45_ID_US0: + pdev = &at91sam9g45_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9G45_ID_US1: + pdev = &at91sam9g45_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9G45_ID_US2: + pdev = &at91sam9g45_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9G45_ID_US3: + pdev = &at91sam9g45_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} +#else +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + at91_add_device_rtc(); + at91_add_device_rtt(); + at91_add_device_watchdog(); + at91_add_device_tc(); + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 970fd6b6753..61e52b66bc7 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { }, }; +/* + * IDE (CF True IDE mode) + */ +static struct at91_cf_data afeb9260_cf_data = { + .chipselect = 4, + .irq_pin = AT91_PIN_PA6, + .rst_pin = AT91_PIN_PA7, + .flags = AT91_CF_TRUE_IDE, +}; + static void __init afeb9260_board_init(void) { /* Serial */ @@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void) ARRAY_SIZE(afeb9260_i2c_devices)); /* Audio */ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); + /* IDE */ + at91_add_device_cf(&afeb9260_cf_data); } MACHINE_START(AFEB9260, "Custom afeb9260 board") diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c new file mode 100644 index 00000000000..4bc2e9f6ebb --- /dev/null +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -0,0 +1,385 @@ +/* + * linux/arch/arm/mach-at91/board-cpu9krea.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91sam9260_matrix.h> + +#include "sam9_smc.h" +#include "generic.h" + +static void __init cpu9krea_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | + ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART3 on ttyS4. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US3, 4, 0); + + /* USART4 on ttyS5. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init cpu9krea_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata cpu9krea_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata cpu9krea_udc_data = { + .vbus_pin = AT91_PIN_PC8, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata cpu9krea_macb_data = { + .is_rmii = 1, +}; + +/* + * NAND flash + */ +static struct atmel_nand_data __initdata cpu9krea_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .bus_width_16 = 0, +}; + +#ifdef CONFIG_MACH_CPU9260 +static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 3, + .nrd_pulse = 3, + .ncs_write_pulse = 3, + .nwe_pulse = 3, + + .read_cycle = 5, + .write_cycle = 5, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 2, +}; +#else +static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 3, +}; +#endif + +static void __init cpu9krea_add_device_nand(void) +{ + sam9_smc_configure(3, &cpu9krea_nand_smc_config); + at91_add_device_nand(&cpu9krea_nand_data); +} + +/* + * NOR flash + */ +static struct physmap_flash_data cpuat9260_nor_data = { + .width = 2, +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE SZ_64M + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cpu9krea_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &cpuat9260_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +#ifdef CONFIG_MACH_CPU9260 +static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 10, + .nrd_pulse = 10, + .ncs_write_pulse = 6, + .nwe_pulse = 6, + + .read_cycle = 12, + .write_cycle = 8, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16, + .tdf_cycles = 2, +}; +#else +static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 1, + .ncs_write_setup = 0, + .nwe_setup = 1, + + .ncs_read_pulse = 13, + .nrd_pulse = 13, + .ncs_write_pulse = 8, + .nwe_pulse = 8, + + .read_cycle = 15, + .write_cycle = 10, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16, + .tdf_cycles = 2, +}; +#endif + +static __init void cpu9krea_add_device_nor(void) +{ + unsigned long csa; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); + + /* configure chip-select 0 (NOR) */ + sam9_smc_configure(0, &cpu9krea_nor_smc_config); + + platform_device_register(&cpu9krea_nor_flash); +} + +/* + * LEDs + */ +static struct gpio_led cpu9krea_leds[] = { + { /* LED1 */ + .name = "LED1", + .gpio = AT91_PIN_PC11, + .active_low = 1, + .default_trigger = "timer", + }, + { /* LED2 */ + .name = "LED2", + .gpio = AT91_PIN_PC12, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* LED3 */ + .name = "LED3", + .gpio = AT91_PIN_PC7, + .active_low = 1, + .default_trigger = "none", + }, + { /* LED4 */ + .name = "LED4", + .gpio = AT91_PIN_PC9, + .active_low = 1, + .default_trigger = "none", + } +}; + +static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-ds1307", 0x68), + .type = "ds1339", + }, +}; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button cpu9krea_buttons[] = { + { + .gpio = AT91_PIN_PC3, + .code = BTN_0, + .desc = "BP1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB20, + .code = BTN_1, + .desc = "BP2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data cpu9krea_button_data = { + .buttons = cpu9krea_buttons, + .nbuttons = ARRAY_SIZE(cpu9krea_buttons), +}; + +static struct platform_device cpu9krea_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &cpu9krea_button_data, + } +}; + +static void __init cpu9krea_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */ + at91_set_deglitch(AT91_PIN_PC3, 1); + at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */ + at91_set_deglitch(AT91_PIN_PB20, 1); + + platform_device_register(&cpu9krea_button_device); +} +#else +static void __init cpu9krea_add_device_buttons(void) +{ +} +#endif + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata cpu9krea_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PA29, +}; + +static void __init cpu9krea_board_init(void) +{ + /* NOR */ + cpu9krea_add_device_nor(); + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&cpu9krea_usbh_data); + /* USB Device */ + at91_add_device_udc(&cpu9krea_udc_data); + /* NAND */ + cpu9krea_add_device_nand(); + /* Ethernet */ + at91_add_device_eth(&cpu9krea_macb_data); + /* MMC */ + at91_add_device_mmc(0, &cpu9krea_mmc_data); + /* I2C */ + at91_add_device_i2c(cpu9krea_i2c_devices, + ARRAY_SIZE(cpu9krea_i2c_devices)); + /* LEDs */ + at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds)); + /* Push Buttons */ + cpu9krea_add_device_buttons(); +} + +#ifdef CONFIG_MACH_CPU9260 +MACHINE_START(CPUAT9260, "Eukrea CPU9260") +#else +MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") +#endif + /* Maintainer: Eric Benard - EUKREA Electromatique */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cpu9krea_map_io, + .init_irq = cpu9krea_init_irq, + .init_machine = cpu9krea_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c new file mode 100644 index 00000000000..a28d9965619 --- /dev/null +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -0,0 +1,185 @@ +/* + * linux/arch/arm/mach-at91/board-cpuat91.c + * + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> + +#include <mach/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91rm9200_mc.h> + +#include "generic.h" + +static struct gpio_led cpuat91_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = AT91_PIN_PC0, + }, +}; + +static void __init cpuat91_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | + ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART2 on ttyS3 (Rx, Tx) */ + at91_register_uart(AT91RM9200_ID_US2, 3, 0); + + /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init cpuat91_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata cpuat91_eth_data = { + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata cpuat91_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata cpuat91_udc_data = { + .vbus_pin = AT91_PIN_PC15, + .pullup_pin = AT91_PIN_PC14, +}; + +static struct at91_mmc_data __initdata cpuat91_mmc_data = { + .det_pin = AT91_PIN_PC2, + .wire4 = 1, +}; + +static struct physmap_flash_data cpuat91_flash_data = { + .width = 2, +}; + +static struct resource cpuat91_flash_resource = { + .start = AT91_CHIPSELECT_0, + .end = AT91_CHIPSELECT_0 + SZ_16M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device cpuat91_norflash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &cpuat91_flash_data, + }, + .resource = &cpuat91_flash_resource, + .num_resources = 1, +}; + +#ifdef CONFIG_MTD_PLATRAM +struct platdata_mtd_ram at91_sram_pdata = { + .mapname = "SRAM", + .bankwidth = 2, +}; + +static struct resource at91_sram_resource[] = { + [0] = { + .start = AT91RM9200_SRAM_BASE, + .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device at91_sram = { + .name = "mtd-ram", + .id = 0, + .resource = at91_sram_resource, + .num_resources = ARRAY_SIZE(at91_sram_resource), + .dev = { + .platform_data = &at91_sram_pdata, + }, +}; +#endif /* MTD_PLATRAM */ + +static struct platform_device *platform_devices[] __initdata = { + &cpuat91_norflash, +#ifdef CONFIG_MTD_PLATRAM + &at91_sram, +#endif /* CONFIG_MTD_PLATRAM */ +}; + +static void __init cpuat91_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* LEDs. */ + at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds)); + /* Ethernet */ + at91_add_device_eth(&cpuat91_eth_data); + /* USB Host */ + at91_add_device_usbh(&cpuat91_usbh_data); + /* USB Device */ + at91_add_device_udc(&cpuat91_udc_data); + /* MMC */ + at91_add_device_mmc(0, &cpuat91_mmc_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* Platform devices */ + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +MACHINE_START(CPUAT91, "Eukrea") + /* Maintainer: Eric Benard - EUKREA Electromatique */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = cpuat91_map_io, + .init_irq = cpuat91_init_irq, + .init_machine = cpuat91_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index d5266da5531..f9b19993a7a 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {} */ static struct at73c213_board_info at73c213_data = { .ssc_id = 1, +#if defined(CONFIG_MACH_AT91SAM9261EK) .shortname = "AT91SAM9261-EK external DAC", +#else + .shortname = "AT91SAM9G10-EK external DAC", +#endif }; #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) @@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_stn_monspecs, .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, .guard_time = 1, +#if defined(CONFIG_MACH_AT91SAM9G10EK) + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, +#endif }; #else @@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_tft_monspecs, .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, +#if defined(CONFIG_MACH_AT91SAM9G10EK) + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, +#endif }; #endif @@ -600,7 +610,11 @@ static void __init ek_board_init(void) at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } +#if defined(CONFIG_MACH_AT91SAM9261EK) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") +#else +MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") +#endif /* Maintainer: Atmel */ .phys_io = AT91_BASE_SYS, .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 57d52528f22..1bf7bd4cbe1 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {} /* * AC97 + * reset_pin is not connected: NRST */ -static struct atmel_ac97_data ek_ac97_data = { - .reset_pin = AT91_PIN_PA13, +static struct ac97c_platform_data ek_ac97_data = { }; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index cc270beadd5..ca470d504ea 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -24,6 +24,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/clk.h> #include <mach/hardware.h> @@ -218,9 +220,60 @@ static struct gpio_led ek_leds[] = { } }; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA30, + .code = BTN_3, + .desc = "Button 3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA31, + .code = BTN_4, + .desc = "Button 4", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA30, 1); + at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ + at91_set_deglitch(AT91_PIN_PA31, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), + I2C_BOARD_INFO("wm8731", 0x1b), }, }; @@ -245,6 +298,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c new file mode 100644 index 00000000000..b8558eae522 --- /dev/null +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -0,0 +1,389 @@ +/* + * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family + * + * Covers: * AT91SAM9G45-EKES board + * * AT91SAM9M10G45-EK board + * + * Copyright (C) 2009 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/fb.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <video/atmel_lcdc.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91_shdwc.h> + +#include "sam9_smc.h" +#include "generic.h" + + +static void __init ek_map_io(void) +{ + /* Initialize processor: 12.000 MHz crystal */ + at91sam9g45_initialize(12000000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 not connected on the -EK board */ + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ek_init_irq(void) +{ + at91sam9g45_init_interrupts(NULL); +} + + +/* + * USB HS Host port (common to OHCI & EHCI) + */ +static struct at91_usbh_data __initdata ek_usbh_hs_data = { + .ports = 2, + .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, +}; + + +/* + * USB HS Device port + */ +static struct usba_platform_data __initdata ek_usba_udc_data = { + .vbus_pin = AT91_PIN_PB19, +}; + + +/* + * SPI devices. + */ +static struct spi_board_info ek_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PD5, + .is_rmii = 1, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Partition 1", + .offset = 0, + .size = SZ_64M, + }, + { + .name = "Partition 2", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +/* det_pin is not connected */ +static struct atmel_nand_data __initdata ek_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC8, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + +static struct sam9_smc_config __initdata ek_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, + .tdf_cycles = 3, +}; + +static void __init ek_add_device_nand(void) +{ + /* setup bus-width (8 or 16) */ + if (ek_nand_data.bus_width_16) + ek_nand_smc_config.mode |= AT91_SMC_DBW_16; + else + ek_nand_smc_config.mode |= AT91_SMC_DBW_8; + + /* configure chip-select 3 (NAND) */ + sam9_smc_configure(3, &ek_nand_smc_config); + + at91_add_device_nand(&ek_nand_data); +} + + +/* + * LCD Controller + */ +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static struct fb_videomode at91_tft_vga_modes[] = { + { + .name = "LG", + .refresh = 60, + .xres = 480, .yres = 272, + .pixclock = KHZ2PICOS(9000), + + .left_margin = 1, .right_margin = 1, + .upper_margin = 40, .lower_margin = 1, + .hsync_len = 45, .vsync_len = 1, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_monspecs = { + .manufacturer = "LG", + .monitor = "LB043WQ1", + + .modedb = at91_tft_vga_modes, + .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), + .hfmin = 15000, + .hfmax = 17640, + .vfmin = 57, + .vfmax = 67, +}; + +#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_TFT \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) + +/* Driver datas */ +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, + .default_bpp = 32, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2, + .default_monspecs = &at91fb_default_monspecs, + .guard_time = 9, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, +}; + +#else +static struct atmel_lcdfb_info __initdata ek_lcdc_data; +#endif + + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { /* BP1, "leftclic" */ + .code = BTN_LEFT, + .gpio = AT91_PIN_PB6, + .active_low = 1, + .desc = "left_click", + .wakeup = 1, + }, + { /* BP2, "rightclic" */ + .code = BTN_RIGHT, + .gpio = AT91_PIN_PB7, + .active_low = 1, + .desc = "right_click", + .wakeup = 1, + }, + /* BP3, "joystick" */ + { + .code = KEY_LEFT, + .gpio = AT91_PIN_PB14, + .active_low = 1, + .desc = "Joystick Left", + }, + { + .code = KEY_RIGHT, + .gpio = AT91_PIN_PB15, + .active_low = 1, + .desc = "Joystick Right", + }, + { + .code = KEY_UP, + .gpio = AT91_PIN_PB16, + .active_low = 1, + .desc = "Joystick Up", + }, + { + .code = KEY_DOWN, + .gpio = AT91_PIN_PB17, + .active_low = 1, + .desc = "Joystick Down", + }, + { + .code = KEY_ENTER, + .gpio = AT91_PIN_PB18, + .active_low = 1, + .desc = "Joystick Press", + }, +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) { + at91_set_GPIO_periph(ek_buttons[i].gpio, 1); + at91_set_deglitch(ek_buttons[i].gpio, 1); + } + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + +/* + * LEDs ... these could all be PWM-driven, for variable brightness + */ +static struct gpio_led ek_leds[] = { + { /* "top" led, red, powerled */ + .name = "d8", + .gpio = AT91_PIN_PD30, + .default_trigger = "heartbeat", + }, + { /* "left" led, green, userled2, pwm3 */ + .name = "d6", + .gpio = AT91_PIN_PD0, + .active_low = 1, + .default_trigger = "nand-disk", + }, +#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)) + { /* "right" led, green, userled1, pwm1 */ + .name = "d7", + .gpio = AT91_PIN_PD31, + .active_low = 1, + .default_trigger = "mmc0", + }, +#endif +}; + + +/* + * PWM Leds + */ +static struct gpio_led ek_pwm_led[] = { +#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE) + { /* "right" led, green, userled1, pwm1 */ + .name = "d7", + .gpio = 1, /* is PWM channel number */ + .active_low = 1, + .default_trigger = "none", + }, +#endif +}; + + + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB HS Host */ + at91_add_device_usbh_ohci(&ek_usbh_hs_data); + /* USB HS Device */ + at91_add_device_usba(&ek_usba_udc_data); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* Ethernet */ + at91_add_device_eth(&ek_macb_data); + /* NAND */ + ek_add_device_nand(); + /* I2C */ + at91_add_device_i2c(0, NULL, 0); + /* LCD Controller */ + at91_add_device_lcdc(&ek_lcdc_data); + /* Push Buttons */ + ek_add_device_buttons(); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); +} + +MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES") + /* Maintainer: Atmel */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 35e12a49d1a..9d07679efce 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -15,6 +15,8 @@ #include <linux/spi/spi.h> #include <linux/fb.h> #include <linux/clk.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <video/atmel_lcdc.h> @@ -186,19 +188,21 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { if (on) - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ + at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ else - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ } /* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, .default_monspecs = &at91fb_default_monspecs, .atmel_lcdfb_power_control = at91_lcdc_power_control, .guard_time = 1, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, }; #else @@ -206,6 +210,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; #endif +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* "bottom" led, green, userled1 to be defined */ + .name = "ds1", + .gpio = AT91_PIN_PD15, + .active_low = 1, + .default_trigger = "none", + }, + { /* "bottom" led, green, userled2 to be defined */ + .name = "ds2", + .gpio = AT91_PIN_PD16, + .active_low = 1, + .default_trigger = "none", + }, + { /* "power" led, yellow */ + .name = "ds3", + .gpio = AT91_PIN_PD14, + .default_trigger = "heartbeat", + } +}; + + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PB0, + .code = BTN_2, + .desc = "Right Click", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB1, + .code = BTN_1, + .desc = "Left Click", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */ + at91_set_deglitch(AT91_PIN_PB1, 1); + at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */ + at91_set_deglitch(AT91_PIN_PB0, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static void __init ek_board_init(void) { /* Serial */ @@ -224,6 +301,10 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Touch Screen Controller */ at91_add_device_tsadcc(); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); } MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index bac578fe0d3..c042dcf4725 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -47,20 +47,25 @@ * Chips have some kind of clocks : group them by functionality */ #define cpu_has_utmi() ( cpu_is_at91cap9() \ - || cpu_is_at91sam9rl()) + || cpu_is_at91sam9rl() \ + || cpu_is_at91sam9g45()) -#define cpu_has_800M_plla() (cpu_is_at91sam9g20()) +#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ + || cpu_is_at91sam9g45()) -#define cpu_has_pllb() (!cpu_is_at91sam9rl()) +#define cpu_has_300M_plla() (cpu_is_at91sam9g10()) -#define cpu_has_upll() (0) +#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ + || cpu_is_at91sam9g45())) + +#define cpu_has_upll() (cpu_is_at91sam9g45()) /* USB host HS & FS */ #define cpu_has_uhp() (!cpu_is_at91sam9rl()) /* USB device FS only */ -#define cpu_has_udpfs() (!cpu_is_at91sam9rl()) - +#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ + || cpu_is_at91sam9g45())) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on) { unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR); + if (cpu_is_at91sam9g45()) { + if (is_on) + uckr |= AT91_PMC_BIASEN; + else + uckr &= ~AT91_PMC_BIASEN; + } + if (is_on) { is_on = AT91_PMC_LOCKU; at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); @@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) unsigned long flags; unsigned prescale; unsigned long actual; + unsigned long prev = ULONG_MAX; if (!clk_is_programmable(clk)) return -EINVAL; @@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate) actual = clk->parent->rate_hz; for (prescale = 0; prescale < 7; prescale++) { - if (actual && actual <= rate) + if (actual > rate) + prev = actual; + + if (actual && actual <= rate) { + if ((prev - rate) < (rate - actual)) { + actual = prev; + prescale--; + } break; + } actual >>= 1; } @@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return -EBUSY; if (!clk_is_primary(parent) || !clk_is_programmable(clk)) return -EINVAL; + + if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB) + return -EINVAL; + spin_lock_irqsave(&clk_lock, flags); clk->rate_hz = parent->rate_hz; @@ -601,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || + cpu_is_at91sam9263() || cpu_is_at91sam9g20() || + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { @@ -637,6 +664,7 @@ int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; int i; + int pll_overclock = false; /* * When the bootloader initialized the main oscillator correctly, @@ -654,12 +682,25 @@ int __init at91_clock_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); - if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000) - || (cpu_has_800M_plla() && plla.rate_hz > 800000000)) + if (cpu_has_300M_plla()) { + if (plla.rate_hz > 300000000) + pll_overclock = true; + } else if (cpu_has_800M_plla()) { + if (plla.rate_hz > 800000000) + pll_overclock = true; + } else { + if (plla.rate_hz > 209000000) + pll_overclock = true; + } + if (pll_overclock) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); + if (cpu_is_at91sam9g45()) { + mckr = at91_sys_read(AT91_PMC_MCKR); + plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */ + } - if (cpu_has_upll() && !cpu_has_pllb()) { + if (!cpu_has_pllb() && cpu_has_upll()) { /* setup UTMI clock as the fourth primary clock * (instead of pllb) */ utmi_clk.type |= CLK_TYPE_PRIMARY; @@ -701,6 +742,9 @@ int __init at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ + } else if (cpu_is_at91sam9g45()) { + mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? + freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b5daf7f5e01..88e413b3848 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); extern void __init at91sam9rl_initialize(unsigned long main_clock); +extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); @@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]); extern void __init at91sam9261_init_interrupts(unsigned int priority[]); extern void __init at91sam9263_init_interrupts(unsigned int priority[]); extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); +extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index f2236f0e101..ae4772e744a 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \ { \ .chip = { \ .label = name, \ - .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ @@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); } -static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) -{ - unsigned pin = chip->base + offset; - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - /* Cannot request GPIOs that are in alternate function mode */ - if (!(__raw_readl(pio + PIO_PSR) & mask)) - return -EPERM; - - return 0; -} - static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) { int i; diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 3a348ca2077..87de8be1748 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -95,6 +95,9 @@ #define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ #define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ +#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */ +#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */ + #define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ #define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h new file mode 100644 index 00000000000..a526869aee3 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -0,0 +1,155 @@ +/* + * Chip-specific header file for the AT91SAM9G45 family + * + * Copyright (C) 2008-2009 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_H +#define AT91SAM9G45_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Controller Interrupt */ +#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ +#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ +#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ +#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ +#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ +#define AT91SAM9G45_ID_US0 7 /* USART 0 */ +#define AT91SAM9G45_ID_US1 8 /* USART 1 */ +#define AT91SAM9G45_ID_US2 9 /* USART 2 */ +#define AT91SAM9G45_ID_US3 10 /* USART 3 */ +#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ +#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ +#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ +#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ +#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ +#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ +#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ +#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ +#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ +#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ +#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ +#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ +#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ +#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ +#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ +#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ +#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ +#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9G45_BASE_UDPHS 0xfff78000 +#define AT91SAM9G45_BASE_TCB0 0xfff7c000 +#define AT91SAM9G45_BASE_TC0 0xfff7c000 +#define AT91SAM9G45_BASE_TC1 0xfff7c040 +#define AT91SAM9G45_BASE_TC2 0xfff7c080 +#define AT91SAM9G45_BASE_MCI0 0xfff80000 +#define AT91SAM9G45_BASE_TWI0 0xfff84000 +#define AT91SAM9G45_BASE_TWI1 0xfff88000 +#define AT91SAM9G45_BASE_US0 0xfff8c000 +#define AT91SAM9G45_BASE_US1 0xfff90000 +#define AT91SAM9G45_BASE_US2 0xfff94000 +#define AT91SAM9G45_BASE_US3 0xfff98000 +#define AT91SAM9G45_BASE_SSC0 0xfff9c000 +#define AT91SAM9G45_BASE_SSC1 0xfffa0000 +#define AT91SAM9G45_BASE_SPI0 0xfffa4000 +#define AT91SAM9G45_BASE_SPI1 0xfffa8000 +#define AT91SAM9G45_BASE_AC97C 0xfffac000 +#define AT91SAM9G45_BASE_TSC 0xfffb0000 +#define AT91SAM9G45_BASE_ISI 0xfffb4000 +#define AT91SAM9G45_BASE_PWMC 0xfffb8000 +#define AT91SAM9G45_BASE_EMAC 0xfffbc000 +#define AT91SAM9G45_BASE_AES 0xfffc0000 +#define AT91SAM9G45_BASE_TDES 0xfffc4000 +#define AT91SAM9G45_BASE_SHA 0xfffc8000 +#define AT91SAM9G45_BASE_TRNG 0xfffcc000 +#define AT91SAM9G45_BASE_MCI1 0xfffd0000 +#define AT91SAM9G45_BASE_TCB1 0xfffd4000 +#define AT91SAM9G45_BASE_TC3 0xfffd4000 +#define AT91SAM9G45_BASE_TC4 0xfffd4040 +#define AT91SAM9G45_BASE_TC5 0xfffd4080 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9G45_BASE_US0 +#define AT91_USART1 AT91SAM9G45_BASE_US1 +#define AT91_USART2 AT91SAM9G45_BASE_US2 +#define AT91_USART3 AT91SAM9G45_BASE_US3 + +/* + * Internal Memory. + */ +#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ + +#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ + +#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ +#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */ +#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ +#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +#define CONSISTENT_DMA_SIZE SZ_4M + +/* + * DMA peripheral identifiers + * for hardware handshaking interface + */ +#define AT_DMA_ID_MCI0 0 +#define AT_DMA_ID_SPI0_TX 1 +#define AT_DMA_ID_SPI0_RX 2 +#define AT_DMA_ID_SPI1_TX 3 +#define AT_DMA_ID_SPI1_RX 4 +#define AT_DMA_ID_SSC0_TX 5 +#define AT_DMA_ID_SSC0_RX 6 +#define AT_DMA_ID_SSC1_TX 7 +#define AT_DMA_ID_SSC1_RX 8 +#define AT_DMA_ID_AC97_TX 9 +#define AT_DMA_ID_AC97_RX 10 +#define AT_DMA_ID_MCI1 13 + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h new file mode 100644 index 00000000000..c972d60e0ae --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h @@ -0,0 +1,153 @@ +/* + * Matrix-centric header file for the AT91SAM9G45 family + * + * Copyright (C) 2008-2009 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_MATRIX_H +#define AT91SAM9G45_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) +#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ +#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) +#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) + +#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ +#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ +#define AT91C_VDEC_SEL_OFF (0 << 0) +#define AT91C_VDEC_SEL_ON (1 << 0) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index e6afff849b8..13f27a4b882 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -37,6 +37,7 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> +#include <sound/atmel-ac97c.h> /* USB Device */ struct at91_udc_data { @@ -80,7 +81,8 @@ struct at91_eth_data { }; extern void __init at91_add_device_eth(struct at91_eth_data *data); -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -90,6 +92,7 @@ struct at91_usbh_data { u8 vbus_pin[2]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); +extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); /* NAND / SmartMedia */ struct atmel_nand_data { @@ -105,7 +108,11 @@ struct atmel_nand_data { extern void __init at91_add_device_nand(struct atmel_nand_data *data); /* I2C*/ +#if defined(CONFIG_ARCH_AT91SAM9G45) +extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices); +#else extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); +#endif /* SPI */ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); @@ -168,10 +175,7 @@ struct atmel_lcdfb_info; extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); /* AC97 */ -struct atmel_ac97_data { - u8 reset_pin; /* reset */ -}; -extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); +extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); /* ISI */ extern void __init at91_add_device_isi(void); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index c554c3e4d55..34a9502c48b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -21,8 +21,10 @@ #define ARCH_ID_AT91SAM9260 0x019803a0 #define ARCH_ID_AT91SAM9261 0x019703a0 #define ARCH_ID_AT91SAM9263 0x019607a0 +#define ARCH_ID_AT91SAM9G10 0x819903a0 #define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 +#define ARCH_ID_AT91SAM9G45 0x819b05a0 #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -39,6 +41,15 @@ static inline unsigned long at91_cpu_identify(void) return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); } +#define ARCH_EXID_AT91SAM9M11 0x00000001 +#define ARCH_EXID_AT91SAM9M10 0x00000002 +#define ARCH_EXID_AT91SAM9G45 0x00000004 + +static inline unsigned long at91_exid_identify(void) +{ + return at91_sys_read(AT91_DBGU_EXID); +} + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 @@ -87,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91sam9261() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9G10 +#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10) +#else +#define cpu_is_at91sam9g10() (0) +#endif + #ifdef CONFIG_ARCH_AT91SAM9263 #define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) #else @@ -99,6 +116,12 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91sam9rl() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9G45 +#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) +#else +#define cpu_is_at91sam9g45() (0) +#endif + #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) #define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index da0b681c652..a0df8b022df 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -20,12 +20,14 @@ #include <mach/at91rm9200.h> #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) #include <mach/at91sam9260.h> -#elif defined(CONFIG_ARCH_AT91SAM9261) +#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10) #include <mach/at91sam9261.h> #elif defined(CONFIG_ARCH_AT91SAM9263) #include <mach/at91sam9263.h> #elif defined(CONFIG_ARCH_AT91SAM9RL) #include <mach/at91sam9rl.h> +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9g45.h> #elif defined(CONFIG_ARCH_AT91CAP9) #include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index d84c9948bec..31ac2d97f14 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -42,6 +42,11 @@ #define AT91SAM9_MASTER_CLOCK 99300000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) +#elif defined(CONFIG_ARCH_AT91SAM9G10) + +#define AT91SAM9_MASTER_CLOCK 133000000 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + #elif defined(CONFIG_ARCH_AT91SAM9263) #if defined(CONFIG_MACH_USB_A9263) @@ -62,6 +67,11 @@ #define AT91SAM9_MASTER_CLOCK 132096000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) +#elif defined(CONFIG_ARCH_AT91SAM9G45) + +#define AT91SAM9_MASTER_CLOCK 133333333 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + #elif defined(CONFIG_ARCH_AT91CAP9) #define AT91CAP9_MASTER_CLOCK 100000000 diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index e26c4fe61fa..4028724d490 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void) pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() + || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) { pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 3fbd9b0fbe2..caf6d5154ae 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -12,18 +12,15 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> +#include <linux/mtd/physmap.h> + #include <mach/hardware.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> + static struct physmap_flash_data adssphere_flash_data = { .width = 4, }; diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 6c4c1633ed1..3dd0e2a2309 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -22,48 +22,39 @@ #include <mach/hardware.h> -/* - * The EP93xx has two external crystal oscillators. To generate the - * required high-frequency clocks, the processor uses two phase-locked- - * loops (PLLs) to multiply the incoming external clock signal to much - * higher frequencies that are then divided down by programmable dividers - * to produce the needed clocks. The PLLs operate independently of one - * another. - */ -#define EP93XX_EXT_CLK_RATE 14745600 -#define EP93XX_EXT_RTC_RATE 32768 - - struct clk { unsigned long rate; int users; int sw_locked; - u32 enable_reg; + void __iomem *enable_reg; u32 enable_mask; unsigned long (*get_rate)(struct clk *clk); + int (*set_rate)(struct clk *clk, unsigned long rate); }; static unsigned long get_uart_rate(struct clk *clk); +static int set_keytchclk_rate(struct clk *clk, unsigned long rate); + static struct clk clk_uart1 = { .sw_locked = 1, - .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, - .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .enable_reg = EP93XX_SYSCON_DEVCFG, + .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN, .get_rate = get_uart_rate, }; static struct clk clk_uart2 = { .sw_locked = 1, - .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, - .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .enable_reg = EP93XX_SYSCON_DEVCFG, + .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN, .get_rate = get_uart_rate, }; static struct clk clk_uart3 = { .sw_locked = 1, - .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, - .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .enable_reg = EP93XX_SYSCON_DEVCFG, + .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN, .get_rate = get_uart_rate, }; static struct clk clk_pll1; @@ -75,6 +66,15 @@ static struct clk clk_usb_host = { .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; +static struct clk clk_keypad = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV, + .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, + .set_rate = set_keytchclk_rate, +}; +static struct clk clk_pwm = { + .rate = EP93XX_EXT_CLK_RATE, +}; /* DMA Clocks */ static struct clk clk_m2p0 = { @@ -130,27 +130,29 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart1), - INIT_CK("apb:uart2", NULL, &clk_uart2), - INIT_CK("apb:uart3", NULL, &clk_uart3), - INIT_CK(NULL, "pll1", &clk_pll1), - INIT_CK(NULL, "fclk", &clk_f), - INIT_CK(NULL, "hclk", &clk_h), - INIT_CK(NULL, "pclk", &clk_p), - INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), - INIT_CK(NULL, "m2p0", &clk_m2p0), - INIT_CK(NULL, "m2p1", &clk_m2p1), - INIT_CK(NULL, "m2p2", &clk_m2p2), - INIT_CK(NULL, "m2p3", &clk_m2p3), - INIT_CK(NULL, "m2p4", &clk_m2p4), - INIT_CK(NULL, "m2p5", &clk_m2p5), - INIT_CK(NULL, "m2p6", &clk_m2p6), - INIT_CK(NULL, "m2p7", &clk_m2p7), - INIT_CK(NULL, "m2p8", &clk_m2p8), - INIT_CK(NULL, "m2p9", &clk_m2p9), - INIT_CK(NULL, "m2m0", &clk_m2m0), - INIT_CK(NULL, "m2m1", &clk_m2m1), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), + INIT_CK(NULL, "pll1", &clk_pll1), + INIT_CK(NULL, "fclk", &clk_f), + INIT_CK(NULL, "hclk", &clk_h), + INIT_CK(NULL, "pclk", &clk_p), + INIT_CK(NULL, "pll2", &clk_pll2), + INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), + INIT_CK("ep93xx-keypad", NULL, &clk_keypad), + INIT_CK(NULL, "pwm_clk", &clk_pwm), + INIT_CK(NULL, "m2p0", &clk_m2p0), + INIT_CK(NULL, "m2p1", &clk_m2p1), + INIT_CK(NULL, "m2p2", &clk_m2p2), + INIT_CK(NULL, "m2p3", &clk_m2p3), + INIT_CK(NULL, "m2p4", &clk_m2p4), + INIT_CK(NULL, "m2p5", &clk_m2p5), + INIT_CK(NULL, "m2p6", &clk_m2p6), + INIT_CK(NULL, "m2p7", &clk_m2p7), + INIT_CK(NULL, "m2p8", &clk_m2p8), + INIT_CK(NULL, "m2p9", &clk_m2p9), + INIT_CK(NULL, "m2m0", &clk_m2m0), + INIT_CK(NULL, "m2m1", &clk_m2m1), }; @@ -160,9 +162,11 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + value |= clk->enable_mask; if (clk->sw_locked) - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(value | clk->enable_mask, clk->enable_reg); + ep93xx_syscon_swlocked_write(value, clk->enable_reg); + else + __raw_writel(value, clk->enable_reg); } return 0; @@ -175,9 +179,11 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + value &= ~clk->enable_mask; if (clk->sw_locked) - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(value & ~clk->enable_mask, clk->enable_reg); + ep93xx_syscon_swlocked_write(value, clk->enable_reg); + else + __raw_writel(value, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); @@ -202,6 +208,43 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +static int set_keytchclk_rate(struct clk *clk, unsigned long rate) +{ + u32 val; + u32 div_bit; + + val = __raw_readl(clk->enable_reg); + + /* + * The Key Matrix and ADC clocks are configured using the same + * System Controller register. The clock used will be either + * 1/4 or 1/16 the external clock rate depending on the + * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV + * bit being set or cleared. + */ + div_bit = clk->enable_mask >> 15; + + if (rate == EP93XX_KEYTCHCLK_DIV4) + val |= div_bit; + else if (rate == EP93XX_KEYTCHCLK_DIV16) + val &= ~div_bit; + else + return -EINVAL; + + ep93xx_syscon_swlocked_write(val, clk->enable_reg); + clk->rate = rate; + return 0; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (clk->set_rate) + return clk->set_rate(clk, rate); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_rate); + static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 204dc5cbd0b..16b92c37ec9 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -16,40 +16,24 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> +#include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> #include <linux/dma-mapping.h> -#include <linux/time.h> #include <linux/timex.h> -#include <linux/delay.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> #include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> -#include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> #include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/gpio.h> #include <asm/hardware/vic.h> @@ -98,7 +82,7 @@ void __init ep93xx_map_io(void) */ static unsigned int last_jiffy_time; -#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { @@ -362,8 +346,8 @@ void __init ep93xx_init_irq(void) { int gpio_irq; - vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); + vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); + vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); for (gpio_irq = gpio_to_irq(0); gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { @@ -385,6 +369,47 @@ void __init ep93xx_init_irq(void) /************************************************************************* + * EP93xx System Controller Software Locked register handling + *************************************************************************/ + +/* + * syscon_swlock prevents anything else from writing to the syscon + * block while a software locked register is being written. + */ +static DEFINE_SPINLOCK(syscon_swlock); + +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) +{ + unsigned long flags; + + spin_lock_irqsave(&syscon_swlock, flags); + + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(val, reg); + + spin_unlock_irqrestore(&syscon_swlock, flags); +} +EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); + +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&syscon_swlock, flags); + + val = __raw_readl(EP93XX_SYSCON_DEVCFG); + val |= set_bits; + val &= ~clear_bits; + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(val, EP93XX_SYSCON_DEVCFG); + + spin_unlock_irqrestore(&syscon_swlock, flags); +} +EXPORT_SYMBOL(ep93xx_devcfg_set_clear); + + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -517,10 +542,8 @@ static struct platform_device ep93xx_eth_device = { void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) { - if (copy_addr) { - memcpy(data->dev_addr, - (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); - } + if (copy_addr) + memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); ep93xx_eth_data = *data; platform_device_register(&ep93xx_eth_device); @@ -546,19 +569,125 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) platform_device_register(&ep93xx_i2c_device); } + +/************************************************************************* + * EP93xx LEDs + *************************************************************************/ +static struct gpio_led ep93xx_led_pins[] = { + { + .name = "platform:grled", + .gpio = EP93XX_GPIO_LINE_GRLED, + }, { + .name = "platform:rdled", + .gpio = EP93XX_GPIO_LINE_RDLED, + }, +}; + +static struct gpio_led_platform_data ep93xx_led_data = { + .num_leds = ARRAY_SIZE(ep93xx_led_pins), + .leds = ep93xx_led_pins, +}; + +static struct platform_device ep93xx_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ep93xx_led_data, + }, +}; + + +/************************************************************************* + * EP93xx pwm peripheral handling + *************************************************************************/ +static struct resource ep93xx_pwm0_resource[] = { + { + .start = EP93XX_PWM_PHYS_BASE, + .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_pwm0_device = { + .name = "ep93xx-pwm", + .id = 0, + .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), + .resource = ep93xx_pwm0_resource, +}; + +static struct resource ep93xx_pwm1_resource[] = { + { + .start = EP93XX_PWM_PHYS_BASE + 0x20, + .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_pwm1_device = { + .name = "ep93xx-pwm", + .id = 1, + .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), + .resource = ep93xx_pwm1_resource, +}; + +void __init ep93xx_register_pwm(int pwm0, int pwm1) +{ + if (pwm0) + platform_device_register(&ep93xx_pwm0_device); + + /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ + if (pwm1) + platform_device_register(&ep93xx_pwm1_device); +} + +int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) +{ + int err; + + if (pdev->id == 0) { + err = 0; + } else if (pdev->id == 1) { + err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, + dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); + if (err) + goto fail; + + /* PWM 1 output on EGPIO[14] */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); + } else { + err = -ENODEV; + } + + return err; + +fail: + gpio_free(EP93XX_GPIO_LINE_EGPIO14); + return err; +} +EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); + +void ep93xx_pwm_release_gpio(struct platform_device *pdev) +{ + if (pdev->id == 1) { + gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); + gpio_free(EP93XX_GPIO_LINE_EGPIO14); + + /* EGPIO[14] used for GPIO */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); + } +} +EXPORT_SYMBOL(ep93xx_pwm_release_gpio); + + extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) { - unsigned int v; - - /* - * Disallow access to MaverickCrunch initially. - */ - v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); - v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + /* Disallow access to MaverickCrunch initially */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); ep93xx_gpio_init(); @@ -568,4 +697,5 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); + platform_device_register(&ep93xx_leds); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index e9e45b92457..73145ae5d3f 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -26,18 +26,16 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/io.h> #include <linux/i2c.h> +#include <linux/mtd/physmap.h> + #include <mach/hardware.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> + static struct physmap_flash_data edb93xx_flash_data; static struct resource edb93xx_flash_resource = { diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 3bad500b71b..3da7ca816d1 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -12,18 +12,15 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> +#include <linux/mtd/physmap.h> + #include <mach/hardware.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> + static struct physmap_flash_data gesbc9312_flash_data = { .width = 4, }; diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 482cf3d2fbc..1ea8871e03a 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -17,15 +17,16 @@ #include <linux/module.h> #include <linux/seq_file.h> #include <linux/io.h> +#include <linux/gpio.h> +#include <linux/irq.h> -#include <mach/ep93xx-regs.h> -#include <asm/gpio.h> +#include <mach/hardware.h> struct ep93xx_gpio_chip { struct gpio_chip chip; - unsigned int data_reg; - unsigned int data_dir_reg; + void __iomem *data_reg; + void __iomem *data_dir_reg; }; #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) @@ -111,15 +112,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); u8 data_reg, data_dir_reg; - int i; + int gpio, i; data_reg = __raw_readb(ep93xx_chip->data_reg); data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); - for (i = 0; i < chip->ngpio; i++) - seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i, - (data_reg & (1 << i)) ? "set" : "clear", - (data_dir_reg & (1 << i)) ? "out" : "in"); + gpio = ep93xx_chip->chip.base; + for (i = 0; i < chip->ngpio; i++, gpio++) { + int is_out = data_dir_reg & (1 << i); + + seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s", + chip->label, i, gpio, + gpiochip_is_requested(chip, i) ? : "", + is_out ? "out" : "in ", + (data_reg & (1 << i)) ? "hi" : "lo"); + + if (!is_out) { + int irq = gpio_to_irq(gpio); + struct irq_desc *desc = irq_desc + irq; + + if (irq >= 0 && desc->action) { + char *trigger; + + switch (desc->status & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_NONE: + trigger = "(default)"; + break; + case IRQ_TYPE_EDGE_FALLING: + trigger = "edge-falling"; + break; + case IRQ_TYPE_EDGE_RISING: + trigger = "edge-rising"; + break; + case IRQ_TYPE_EDGE_BOTH: + trigger = "edge-both"; + break; + case IRQ_TYPE_LEVEL_HIGH: + trigger = "level-high"; + break; + case IRQ_TYPE_LEVEL_LOW: + trigger = "level-low"; + break; + default: + trigger = "?trigger?"; + break; + } + + seq_printf(s, " irq-%d %s%s", + irq, trigger, + (desc->status & IRQ_WAKEUP) + ? " wakeup" : ""); + } + } + + seq_printf(s, "\n"); + } } #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 967c079180d..ea78e908fc8 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -52,40 +52,43 @@ #define EP93XX_AHB_VIRT_BASE 0xfef00000 #define EP93XX_AHB_SIZE 0x00100000 +#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) + #define EP93XX_APB_PHYS_BASE 0x80800000 #define EP93XX_APB_VIRT_BASE 0xfed00000 #define EP93XX_APB_SIZE 0x00200000 +#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) + /* AHB peripherals */ -#define EP93XX_DMA_BASE ((void __iomem *) \ - (EP93XX_AHB_VIRT_BASE + 0x00000000)) +#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) -#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) #define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) +#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) -#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) #define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) +#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) -#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000) +#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) -#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000) +#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) -#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000) +#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) -#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000) +#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) -#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000) +#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) -#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000) +#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) -#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000) +#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) -#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000) +#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) /* APB peripherals */ -#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000) +#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) #define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) #define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) #define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) @@ -102,11 +105,11 @@ #define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) #define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) -#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) +#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) -#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) +#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) -#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) +#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) #define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) @@ -124,32 +127,33 @@ #define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) +#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) -#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000) +#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) -#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000) +#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) -#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000) #define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) +#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) -#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000) #define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) +#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) -#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000) #define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) +#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) -#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000) +#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) -#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) -#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) +#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) +#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) +#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000) +#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) -#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) #define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) +#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) -#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) +#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) #define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) @@ -172,14 +176,45 @@ #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) -#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) -#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) +#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) +#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) +#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) +#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) +#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) +#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) +#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) +#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) +#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) +#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) +#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) +#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) +#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) +#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) +#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) +#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) +#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) +#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) +#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) +#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) +#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) +#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) +#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) +#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) +#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) +#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) +#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) +#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) +#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) +#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) +#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) -#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) +#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) #endif diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 2866297310b..349fa7cb72d 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -4,12 +4,23 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include "ep93xx-regs.h" +#include <mach/ep93xx-regs.h> +#include <mach/platform.h> #define pcibios_assign_all_busses() 0 -#include "platform.h" +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 -#include "ts72xx.h" +#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4) +#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16) #endif diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h index fd5f081cc8b..cebcc1c53d6 100644 --- a/arch/arm/mach-ep93xx/include/mach/io.h +++ b/arch/arm/mach-ep93xx/include/mach/io.h @@ -1,8 +1,21 @@ /* * arch/arm/mach-ep93xx/include/mach/io.h */ +#ifndef __ASM_MACH_IO_H +#define __ASM_MACH_IO_H #define IO_SPACE_LIMIT 0xffffffff -#define __io(p) __typesafe_io(p) -#define __mem_pci(p) (p) +#define __io(p) __typesafe_io(p) +#define __mem_pci(p) (p) + +/* + * A typesafe __io() variation for variable initialisers + */ +#ifdef __ASSEMBLER__ +#define IOMEM(p) p +#else +#define IOMEM(p) ((void __iomem __force *)(p)) +#endif + +#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 05f0f4f2f3c..5f5fa6574d3 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -5,6 +5,7 @@ #ifndef __ASSEMBLY__ struct i2c_board_info; +struct platform_device; struct ep93xx_eth_data { @@ -15,8 +16,27 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); void ep93xx_init_time(unsigned long); + +/* EP93xx System Controller software locked register write */ +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); + +static inline void ep93xx_devcfg_set_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(bits, 0x00); +} + +static inline void ep93xx_devcfg_clear_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(0x00, bits); +} + void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_board_info *devices, int num); +void ep93xx_register_pwm(int pwm0, int pwm1); +int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); +void ep93xx_pwm_release_gpio(struct platform_device *pdev); + void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h index ed8f35e4f06..6d661fe9d66 100644 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ b/arch/arm/mach-ep93xx/include/mach/system.h @@ -11,15 +11,13 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - u32 devicecfg; - local_irq_disable(); - devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); + /* + * Set then clear the SWRST bit to initiate a software reset + */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); while (1) ; diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 34ddec081c4..2737666e800 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -70,7 +70,6 @@ #ifndef __ASSEMBLY__ -#include <linux/io.h> static inline int board_is_ts7200(void) { diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 15d6815d78c..0a313e82fb7 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -9,21 +9,16 @@ * published by the Free Software Foundation. */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> #include <linux/kernel.h> -#include <linux/mm.h> +#include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/io.h> -#include <linux/i2c.h> #include <linux/mtd/physmap.h> #include <mach/hardware.h> -#include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/mach/arch.h> + static struct ep93xx_eth_data micro9_eth_data = { .phy_id = 0x1f, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 7ee024d3482..5255dddd306 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -12,19 +12,18 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/m48t86.h> #include <linux/io.h> -#include <linux/i2c.h> +#include <linux/m48t86.h> +#include <linux/mtd/physmap.h> + #include <mach/hardware.h> +#include <mach/ts72xx.h> + #include <asm/mach-types.h> -#include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/arch.h> + static struct map_desc ts72xx_io_desc[] __initdata = { { diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4ac04055c2e..69956cdae3c 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev) static struct mmc_platform_data mmc_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, + .gpio_wp = -1, + .gpio_cd = -1, }; static struct amba_device mmc_device = { diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d927eddcad4..9e87e08fb12 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> -#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e70fc7c66bb..ed2a48a9ce7 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -36,7 +36,6 @@ #include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> -#include <mach/usb.h> #include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 @@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .dma_mask = 0xffffffff, + .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, .get_cover_state = nokia770_mmc_get_cover_state, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 0af4d6c85b4..6810b4aeb02 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index a2d7814896b..505d98cfe50 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index da93b86234e..9a0bf6744a0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, }; static void __init board_onenand_init(void) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 2fd22f9c5f0..54fec53a48e 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = { static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) { struct gpmc_timings t; + u32 reg; + int err; const int t_cer = 15; const int t_avdp = 12; @@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - return gpmc_cs_set_timings(cs, &t); + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + + return 0; } static void set_onenand_cfg(void __iomem *onenand_base, int latency, @@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } else if (cfg->flags & ONENAND_SYNC_READWRITE) { sync_read = 1; sync_write = 1; - } + } else + return omap2_onenand_set_async_mode(cs, onenand_base); if (!freq) { /* Very first call freq is not known */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 458990e20c6..a98201cc265 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci) } EXPORT_SYMBOL(omap_chip_is); +int omap_type(void) +{ + u32 val = 0; + + if (cpu_is_omap24xx()) + val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + else if (cpu_is_omap34xx()) + val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + else { + pr_err("Cannot detect omap type!\n"); + goto out; + } + + val &= OMAP2_DEVICETYPE_MASK; + val >>= 8; + +out: + return val; +} +EXPORT_SYMBOL(omap_type); + + /*----------------------------------------------------------------------------*/ #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index fd5b8a5925c..6f71f3730c9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - mbox_dsp_info.irq = platform_get_irq(pdev, 0); - if (mbox_dsp_info.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; goto err_dsp; } + mbox_dsp_info.irq = ret; ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); if (ret) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f0435cd..99b6e154631 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 9756a878fd9..1541fd4c8d0 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { int ret = 0; - struct twl_mmc_controller *c = &hsmmc[1]; + struct twl_mmc_controller *c = NULL; struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; + + for (i = 1; i < ARRAY_SIZE(hsmmc); i++) { + if (mmc == hsmmc[i].mmc) { + c = &hsmmc[i]; + break; + } + } + + if (c == NULL) + return -ENODEV; /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ea9c05093c..ab615e78b79 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init); #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) +/* + * This is only used if GPIOLIB support is disabled + */ static unsigned int realview_mmc_status(struct device *dev) { struct amba_device *adev = container_of(dev, struct amba_device, dev); @@ -238,11 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev) struct mmc_platform_data realview_mmc0_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, + .gpio_wp = 17, + .gpio_cd = 16, }; struct mmc_platform_data realview_mmc1_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, + .gpio_wp = 19, + .gpio_cd = 18, }; /* diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h new file mode 100644 index 00000000000..94ff27678a4 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/gpio.h @@ -0,0 +1,6 @@ +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 8dfa44e08a9..abd13b44867 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <mach/hardware.h> @@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void) iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc)); } +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = -1, +}; + /* * RealView EB AMBA devices */ @@ -189,9 +205,9 @@ AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data); AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 25efe71a67c..17fbb0e889b 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <mach/hardware.h> @@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void) iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc)); } +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = -1, +}; + /* * RealView PB1176 AMBA devices */ @@ -164,9 +180,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL); AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL); diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index dc4b1694390..fdd042b85f4 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <mach/hardware.h> @@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void) iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc)); } +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = -1, +}; + /* * RealView PB11MPCore AMBA devices */ @@ -166,9 +182,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL); AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index d6ac1eb8657..70bba9900d9 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <asm/irq.h> @@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void) iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc)); } +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = -1, +}; + /* * RealView PBA8Core AMBA devices */ @@ -156,9 +172,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL); AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ede2a57240a..ce6c5d25fbe 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -22,6 +22,7 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <asm/irq.h> @@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void) iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc)); } +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = -1, +}; + /* * RealView PBXCore AMBA devices */ @@ -176,9 +192,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL); AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 6a5bc3021bd..ec71a696578 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -48,8 +48,6 @@ #include <plat/mci.h> #include <plat/udc.h> -#include <plat/regs-serial.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> @@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ }, }; diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index e23b581aa0e..0fb385bd9cd 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { */ .name = "neo1973-nand", .nr_chips = 1, - .use_bbt = 1, - .force_soft_ecc = 1, + .flash_bbt = 1, }, }; diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b..111f7ea32b3 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/seq_file.h> #include <asm/clkdev.h> #include <mach/hardware.h> @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 3138d3955c9..585cc013639 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev) mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29; mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd; mmci_card->mmc0_plat_data.status = mmc_status; + mmci_card->mmc0_plat_data.gpio_wp = -1; + mmci_card->mmc0_plat_data.gpio_cd = -1; mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 69214fc8bd1..afc0f87f3fa 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/amba/pl061.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/cnt32_to_63.h> @@ -372,6 +373,8 @@ unsigned int mmc_status(struct device *dev) static struct mmc_platform_data mmc0_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, + .gpio_wp = -1, + .gpio_cd = -1, }; /* @@ -706,6 +709,16 @@ static struct clcd_board clcd_plat_data = { .remove = versatile_clcd_remove, }; +static struct pl061_platform_data gpio0_plat_data = { + .gpio_base = 0, + .irq_base = IRQ_GPIO0_START, +}; + +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = IRQ_GPIO1_START, +}; + #define AACI_IRQ { IRQ_AACI, NO_IRQ } #define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } @@ -768,8 +781,8 @@ AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h new file mode 100644 index 00000000000..94ff27678a4 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/gpio.h @@ -0,0 +1,6 @@ +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h index 9bfdb30e1f3..bf44c61bd1f 100644 --- a/arch/arm/mach-versatile/include/mach/irqs.h +++ b/arch/arm/mach-versatile/include/mach/irqs.h @@ -122,4 +122,13 @@ #define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3) #define IRQ_SIC_END 63 -#define NR_IRQS 64 +#define IRQ_GPIO0_START (IRQ_SIC_END + 1) +#define IRQ_GPIO0_END (IRQ_GPIO0_START + 31) +#define IRQ_GPIO1_START (IRQ_GPIO0_END + 1) +#define IRQ_GPIO1_END (IRQ_GPIO1_START + 31) +#define IRQ_GPIO2_START (IRQ_GPIO1_END + 1) +#define IRQ_GPIO2_END (IRQ_GPIO2_START + 31) +#define IRQ_GPIO3_START (IRQ_GPIO2_END + 1) +#define IRQ_GPIO3_END (IRQ_GPIO3_START + 31) + +#define NR_IRQS (IRQ_GPIO3_END + 1) diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index aa051c0884f..9af8d8154df 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <mach/hardware.h> @@ -43,6 +44,18 @@ static struct mmc_platform_data mmc1_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, + .gpio_wp = -1, + .gpio_cd = -1, +}; + +static struct pl061_platform_data gpio2_plat_data = { + .gpio_base = 16, + .irq_base = IRQ_GPIO2_START, +}; + +static struct pl061_platform_data gpio3_plat_data = { + .gpio_base = 24, + .irq_base = IRQ_GPIO3_START, }; #define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } @@ -70,8 +83,8 @@ AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); -AMBA_DEVICE(gpio3, "dev:e7", GPIO3, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig index 8e4178fe5ec..69bab32a8bc 100644 --- a/arch/arm/mach-w90x900/Kconfig +++ b/arch/arm/mach-w90x900/Kconfig @@ -5,6 +5,16 @@ config CPU_W90P910 help Support for W90P910 of Nuvoton W90X900 CPUs. +config CPU_NUC950 + bool + help + Support for NUCP950 of Nuvoton NUC900 CPUs. + +config CPU_NUC960 + bool + help + Support for NUCP960 of Nuvoton NUC900 CPUs. + menu "W90P910 Machines" config MACH_W90P910EVB @@ -16,4 +26,24 @@ config MACH_W90P910EVB endmenu +menu "NUC950 Machines" + +config MACH_W90P950EVB + bool "Nuvoton NUC950 Evaluation Board" + select CPU_NUC950 + help + Say Y here if you are using the Nuvoton NUC950EVB + +endmenu + +menu "NUC960 Machines" + +config MACH_W90N960EVB + bool "Nuvoton NUC960 Evaluation Board" + select CPU_NUC960 + help + Say Y here if you are using the Nuvoton NUC960EVB + +endmenu + endif diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile index d50c94f4dbd..828c0326441 100644 --- a/arch/arm/mach-w90x900/Makefile +++ b/arch/arm/mach-w90x900/Makefile @@ -4,12 +4,16 @@ # Object file lists. -obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o - +obj-y := irq.o time.o mfp.o gpio.o clock.o +obj-y += clksel.o dev.o cpu.o # W90X900 CPU support files -obj-$(CONFIG_CPU_W90P910) += w90p910.o +obj-$(CONFIG_CPU_W90P910) += nuc910.o +obj-$(CONFIG_CPU_NUC950) += nuc950.o +obj-$(CONFIG_CPU_NUC960) += nuc960.o # machine support -obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o +obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o +obj-$(CONFIG_MACH_W90P950EVB) += mach-nuc950evb.o +obj-$(CONFIG_MACH_W90N960EVB) += mach-nuc960evb.o diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c new file mode 100644 index 00000000000..3de4a5211c3 --- /dev/null +++ b/arch/arm/mach-w90x900/clksel.c @@ -0,0 +1,91 @@ +/* + * linux/arch/arm/mach-w90x900/clksel.c + * + * Copyright (c) 2008 Nuvoton technology corporation + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/regs-clock.h> + +#define PLL0 0x00 +#define PLL1 0x01 +#define OTHER 0x02 +#define EXT 0x03 +#define MSOFFSET 0x0C +#define ATAOFFSET 0x0a +#define LCDOFFSET 0x06 +#define AUDOFFSET 0x04 +#define CPUOFFSET 0x00 + +static DEFINE_MUTEX(clksel_sem); + +static void clock_source_select(const char *dev_id, unsigned int clkval) +{ + unsigned int clksel, offset; + + clksel = __raw_readl(REG_CLKSEL); + + if (strcmp(dev_id, "nuc900-ms") == 0) + offset = MSOFFSET; + else if (strcmp(dev_id, "nuc900-atapi") == 0) + offset = ATAOFFSET; + else if (strcmp(dev_id, "nuc900-lcd") == 0) + offset = LCDOFFSET; + else if (strcmp(dev_id, "nuc900-audio") == 0) + offset = AUDOFFSET; + else + offset = CPUOFFSET; + + clksel &= ~(0x03 << offset); + clksel |= (clkval << offset); + + __raw_writel(clksel, REG_CLKSEL); +} + +void nuc900_clock_source(struct device *dev, unsigned char *src) +{ + unsigned int clkval; + const char *dev_id; + + BUG_ON(!src); + clkval = 0; + + mutex_lock(&clksel_sem); + + if (dev) + dev_id = dev_name(dev); + else + dev_id = "cpufreq"; + + if (strcmp(src, "pll0") == 0) + clkval = PLL0; + else if (strcmp(src, "pll1") == 0) + clkval = PLL1; + else if (strcmp(src, "ext") == 0) + clkval = EXT; + else if (strcmp(src, "oth") == 0) + clkval = OTHER; + + clock_source_select(dev_id, clkval); + + mutex_unlock(&clksel_sem); +} +EXPORT_SYMBOL(nuc900_clock_source); + diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index f420613cd39..b785994bab0 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -25,6 +25,8 @@ #include "clock.h" +#define SUBCLK 0x24 + static DEFINE_SPINLOCK(clocks_lock); int clk_enable(struct clk *clk) @@ -53,7 +55,13 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -void w90x900_clk_enable(struct clk *clk, int enable) +unsigned long clk_get_rate(struct clk *clk) +{ + return 15000000; +} +EXPORT_SYMBOL(clk_get_rate); + +void nuc900_clk_enable(struct clk *clk, int enable) { unsigned int clocks = clk->cken; unsigned long clken; @@ -68,6 +76,22 @@ void w90x900_clk_enable(struct clk *clk, int enable) __raw_writel(clken, W90X900_VA_CLKPWR); } +void nuc900_subclk_enable(struct clk *clk, int enable) +{ + unsigned int clocks = clk->cken; + unsigned long clken; + + clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK); + + if (enable) + clken |= clocks; + else + clken &= ~clocks; + + __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK); +} + + void clks_register(struct clk_lookup *clks, size_t num) { int i; diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h index 4f27bda76d5..f5816a06eed 100644 --- a/arch/arm/mach-w90x900/clock.h +++ b/arch/arm/mach-w90x900/clock.h @@ -12,7 +12,8 @@ #include <asm/clkdev.h> -void w90x900_clk_enable(struct clk *clk, int enable); +void nuc900_clk_enable(struct clk *clk, int enable); +void nuc900_subclk_enable(struct clk *clk, int enable); void clks_register(struct clk_lookup *clks, size_t num); struct clk { @@ -23,10 +24,17 @@ struct clk { #define DEFINE_CLK(_name, _ctrlbit) \ struct clk clk_##_name = { \ - .enable = w90x900_clk_enable, \ + .enable = nuc900_clk_enable, \ .cken = (1 << _ctrlbit), \ } +#define DEFINE_SUBCLK(_name, _ctrlbit) \ +struct clk clk_##_name = { \ + .enable = nuc900_subclk_enable, \ + .cken = (1 << _ctrlbit), \ + } + + #define DEF_CLKLOOK(_clk, _devname, _conname) \ { \ .clk = _clk, \ diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c new file mode 100644 index 00000000000..921cef991bf --- /dev/null +++ b/arch/arm/mach-w90x900/cpu.c @@ -0,0 +1,212 @@ +/* + * linux/arch/arm/mach-w90x900/cpu.c + * + * Copyright (c) 2009 Nuvoton corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * NUC900 series cpu common support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/serial_8250.h> +#include <linux/delay.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/regs-serial.h> +#include <mach/regs-clock.h> +#include <mach/regs-ebi.h> + +#include "cpu.h" +#include "clock.h" + +/* Initial IO mappings */ + +static struct map_desc nuc900_iodesc[] __initdata = { + IODESC_ENT(IRQ), + IODESC_ENT(GCR), + IODESC_ENT(UART), + IODESC_ENT(TIMER), + IODESC_ENT(EBI), +}; + +/* Initial clock declarations. */ +static DEFINE_CLK(lcd, 0); +static DEFINE_CLK(audio, 1); +static DEFINE_CLK(fmi, 4); +static DEFINE_SUBCLK(ms, 0); +static DEFINE_SUBCLK(sd, 1); +static DEFINE_CLK(dmac, 5); +static DEFINE_CLK(atapi, 6); +static DEFINE_CLK(emc, 7); +static DEFINE_SUBCLK(rmii, 2); +static DEFINE_CLK(usbd, 8); +static DEFINE_CLK(usbh, 9); +static DEFINE_CLK(g2d, 10);; +static DEFINE_CLK(pwm, 18); +static DEFINE_CLK(ps2, 24); +static DEFINE_CLK(kpi, 25); +static DEFINE_CLK(wdt, 26); +static DEFINE_CLK(gdma, 27); +static DEFINE_CLK(adc, 28); +static DEFINE_CLK(usi, 29); +static DEFINE_CLK(ext, 0); + +static struct clk_lookup nuc900_clkregs[] = { + DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL), + DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL), + DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL), + DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"), + DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"), + DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL), + DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL), + DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL), + DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"), + DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL), + DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL), + DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL), + DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL), + DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL), + DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL), + DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL), + DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL), + DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL), + DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL), + DEF_CLKLOOK(&clk_ext, NULL, "ext"), +}; + +/* Initial serial platform data */ + +struct plat_serial8250_port nuc900_uart_data[] = { + NUC900_8250PORT(UART0), +}; + +struct platform_device nuc900_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = nuc900_uart_data, + }, +}; + +/*Set NUC900 series cpu frequence*/ +static int __init nuc900_set_clkval(unsigned int cpufreq) +{ + unsigned int pllclk, ahbclk, apbclk, val; + + pllclk = 0; + ahbclk = 0; + apbclk = 0; + + switch (cpufreq) { + case 66: + pllclk = PLL_66MHZ; + ahbclk = AHB_CPUCLK_1_1; + apbclk = APB_AHB_1_2; + break; + + case 100: + pllclk = PLL_100MHZ; + ahbclk = AHB_CPUCLK_1_1; + apbclk = APB_AHB_1_2; + break; + + case 120: + pllclk = PLL_120MHZ; + ahbclk = AHB_CPUCLK_1_2; + apbclk = APB_AHB_1_2; + break; + + case 166: + pllclk = PLL_166MHZ; + ahbclk = AHB_CPUCLK_1_2; + apbclk = APB_AHB_1_2; + break; + + case 200: + pllclk = PLL_200MHZ; + ahbclk = AHB_CPUCLK_1_2; + apbclk = APB_AHB_1_2; + break; + } + + __raw_writel(pllclk, REG_PLLCON0); + + val = __raw_readl(REG_CLKDIV); + val &= ~(0x03 << 24 | 0x03 << 26); + val |= (ahbclk << 24 | apbclk << 26); + __raw_writel(val, REG_CLKDIV); + + return 0; +} +static int __init nuc900_set_cpufreq(char *str) +{ + unsigned long cpufreq, val; + + if (!*str) + return 0; + + strict_strtoul(str, 0, &cpufreq); + + nuc900_clock_source(NULL, "ext"); + + nuc900_set_clkval(cpufreq); + + mdelay(1); + + val = __raw_readl(REG_CKSKEW); + val &= ~0xff; + val |= DEFAULTSKEW; + __raw_writel(val, REG_CKSKEW); + + nuc900_clock_source(NULL, "pll0"); + + return 1; +} + +__setup("cpufreq=", nuc900_set_cpufreq); + +/*Init NUC900 evb io*/ + +void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size) +{ + unsigned long idcode = 0x0; + + iotable_init(mach_desc, mach_size); + iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc)); + + idcode = __raw_readl(NUC900PDID); + if (idcode == NUC910_CPUID) + printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode); + else if (idcode == NUC920_CPUID) + printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode); + else if (idcode == NUC950_CPUID) + printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode); + else if (idcode == NUC960_CPUID) + printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode); +} + +/*Init NUC900 clock*/ + +void __init nuc900_init_clocks(void) +{ + clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); +} + diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index 57b5dbabeb4..4d58ba164e2 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -6,7 +6,7 @@ * Copyright (c) 2008 Nuvoton technology corporation * All rights reserved. * - * Header file for W90X900 CPU support + * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> * @@ -24,29 +24,7 @@ .type = MT_DEVICE, \ } -/*Cpu identifier register*/ - -#define W90X900PDID W90X900_VA_GCR -#define W90P910_CPUID 0x02900910 -#define W90P920_CPUID 0x02900920 -#define W90P950_CPUID 0x02900950 -#define W90N960_CPUID 0x02900960 - -struct w90x900_uartcfg; -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void w90x900_init_irq(void); -extern void w90p910_init_io(struct map_desc *mach_desc, int size); -extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no); -extern void w90p910_init_clocks(void); -extern void w90p910_map_io(struct map_desc *mach_desc, int size); -extern struct platform_device w90p910_serial_device; -extern struct sys_timer w90x900_timer; - -#define W90X900_8250PORT(name) \ +#define NUC900_8250PORT(name) \ { \ .membase = name##_BA, \ .mapbase = name##_PA, \ @@ -56,3 +34,26 @@ extern struct sys_timer w90x900_timer; .iotype = UPIO_MEM, \ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ } + +/*Cpu identifier register*/ + +#define NUC900PDID W90X900_VA_GCR +#define NUC910_CPUID 0x02900910 +#define NUC920_CPUID 0x02900920 +#define NUC950_CPUID 0x02900950 +#define NUC960_CPUID 0x02900960 + +/* extern file from cpu.c */ + +extern void nuc900_clock_source(struct device *dev, unsigned char *src); +extern void nuc900_init_clocks(void); +extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size); +extern void nuc900_board_init(struct platform_device **device, int size); + +/* for either public between 910 and 920, or between 920 and 950 */ + +extern struct platform_device nuc900_serial_device; +extern struct platform_device nuc900_device_fmi; +extern struct platform_device nuc900_device_kpi; +extern struct platform_device nuc900_device_rtc; +extern struct platform_device nuc900_device_ts; diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c new file mode 100644 index 00000000000..2a6f98de48d --- /dev/null +++ b/arch/arm/mach-w90x900/dev.c @@ -0,0 +1,389 @@ +/* + * linux/arch/arm/mach-w90x900/dev.c + * + * Copyright (C) 2009 Nuvoton corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <mach/regs-serial.h> +#include <mach/map.h> + +#include "cpu.h" + +/*NUC900 evb norflash driver data */ + +#define NUC900_FLASH_BASE 0xA0000000 +#define NUC900_FLASH_SIZE 0x400000 +#define SPIOFFSET 0x200 +#define SPIOREG_SIZE 0x100 + +static struct mtd_partition nuc900_flash_partitions[] = { + { + .name = "NOR Partition 1 for kernel (960K)", + .size = 0xF0000, + .offset = 0x10000, + }, + { + .name = "NOR Partition 2 for image (1M)", + .size = 0x100000, + .offset = 0x100000, + }, + { + .name = "NOR Partition 3 for user (2M)", + .size = 0x200000, + .offset = 0x00200000, + } +}; + +static struct physmap_flash_data nuc900_flash_data = { + .width = 2, + .parts = nuc900_flash_partitions, + .nr_parts = ARRAY_SIZE(nuc900_flash_partitions), +}; + +static struct resource nuc900_flash_resources[] = { + { + .start = NUC900_FLASH_BASE, + .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nuc900_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nuc900_flash_data, + }, + .resource = nuc900_flash_resources, + .num_resources = ARRAY_SIZE(nuc900_flash_resources), +}; + +/* USB EHCI Host Controller */ + +static struct resource nuc900_usb_ehci_resource[] = { + [0] = { + .start = W90X900_PA_USBEHCIHOST, + .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL; + +static struct platform_device nuc900_device_usb_ehci = { + .name = "nuc900-ehci", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource), + .resource = nuc900_usb_ehci_resource, + .dev = { + .dma_mask = &nuc900_device_usb_ehci_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +/* USB OHCI Host Controller */ + +static struct resource nuc900_usb_ohci_resource[] = { + [0] = { + .start = W90X900_PA_USBOHCIHOST, + .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL; +static struct platform_device nuc900_device_usb_ohci = { + .name = "nuc900-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource), + .resource = nuc900_usb_ohci_resource, + .dev = { + .dma_mask = &nuc900_device_usb_ohci_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +/* USB Device (Gadget)*/ + +static struct resource nuc900_usbgadget_resource[] = { + [0] = { + .start = W90X900_PA_USBDEV, + .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBD, + .end = IRQ_USBD, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device nuc900_device_usbgadget = { + .name = "nuc900-usbgadget", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource), + .resource = nuc900_usbgadget_resource, +}; + +/* MAC device */ + +static struct resource nuc900_emc_resource[] = { + [0] = { + .start = W90X900_PA_EMC, + .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EMCTX, + .end = IRQ_EMCTX, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_EMCRX, + .end = IRQ_EMCRX, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 nuc900_device_emc_dmamask = 0xffffffffUL; +static struct platform_device nuc900_device_emc = { + .name = "nuc900-emc", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_emc_resource), + .resource = nuc900_emc_resource, + .dev = { + .dma_mask = &nuc900_device_emc_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +/* SPI device */ + +static struct resource nuc900_spi_resource[] = { + [0] = { + .start = W90X900_PA_I2C + SPIOFFSET, + .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device nuc900_device_spi = { + .name = "nuc900-spi", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_spi_resource), + .resource = nuc900_spi_resource, +}; + +/* spi device, spi flash info */ + +static struct mtd_partition nuc900_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x0100000, + .offset = 0, + }, +}; + +static struct flash_platform_data nuc900_spi_flash_data = { + .name = "m25p80", + .parts = nuc900_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions), + .type = "w25x16", +}; + +static struct spi_board_info nuc900_spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &nuc900_spi_flash_data, + .mode = SPI_MODE_0, + }, +}; + +/* WDT Device */ + +static struct resource nuc900_wdt_resource[] = { + [0] = { + .start = W90X900_PA_TIMER, + .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_WDT, + .end = IRQ_WDT, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device nuc900_device_wdt = { + .name = "nuc900-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_wdt_resource), + .resource = nuc900_wdt_resource, +}; + +/* + * public device definition between 910 and 920, or 910 + * and 950 or 950 and 960...,their dev platform register + * should be in specific file such as nuc950, nuc960 c + * files rather than the public dev.c file here. so the + * corresponding platform_device definition should not be + * static. +*/ + +/* RTC controller*/ + +static struct resource nuc900_rtc_resource[] = { + [0] = { + .start = W90X900_PA_RTC, + .end = W90X900_PA_RTC + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC, + .end = IRQ_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device nuc900_device_rtc = { + .name = "nuc900-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_rtc_resource), + .resource = nuc900_rtc_resource, +}; + +/*TouchScreen controller*/ + +static struct resource nuc900_ts_resource[] = { + [0] = { + .start = W90X900_PA_ADC, + .end = W90X900_PA_ADC + W90X900_SZ_ADC-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ADC, + .end = IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device nuc900_device_ts = { + .name = "nuc900-ts", + .id = -1, + .resource = nuc900_ts_resource, + .num_resources = ARRAY_SIZE(nuc900_ts_resource), +}; + +/* FMI Device */ + +static struct resource nuc900_fmi_resource[] = { + [0] = { + .start = W90X900_PA_FMI, + .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FMI, + .end = IRQ_FMI, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device nuc900_device_fmi = { + .name = "nuc900-fmi", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_fmi_resource), + .resource = nuc900_fmi_resource, +}; + +/* KPI controller*/ + +static struct resource nuc900_kpi_resource[] = { + [0] = { + .start = W90X900_PA_KPI, + .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KPI, + .end = IRQ_KPI, + .flags = IORESOURCE_IRQ, + } + +}; + +struct platform_device nuc900_device_kpi = { + .name = "nuc900-kpi", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_kpi_resource), + .resource = nuc900_kpi_resource, +}; + +/*Here should be your evb resourse,such as LCD*/ + +static struct platform_device *nuc900_public_dev[] __initdata = { + &nuc900_serial_device, + &nuc900_flash_device, + &nuc900_device_usb_ehci, + &nuc900_device_usb_ohci, + &nuc900_device_usbgadget, + &nuc900_device_emc, + &nuc900_device_spi, + &nuc900_device_wdt, +}; + +/* Provide adding specific CPU platform devices API */ + +void __init nuc900_board_init(struct platform_device **device, int size) +{ + platform_add_devices(device, size); + platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); + spi_register_board_info(nuc900_spi_board_info, + ARRAY_SIZE(nuc900_spi_board_info)); +} + diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c index c72e0dfa182..ba05aec7ea4 100644 --- a/arch/arm/mach-w90x900/gpio.c +++ b/arch/arm/mach-w90x900/gpio.c @@ -1,7 +1,7 @@ /* - * linux/arch/arm/mach-w90p910/gpio.c + * linux/arch/arm/mach-w90x900/gpio.c * - * Generic w90p910 GPIO handling + * Generic nuc900 GPIO handling * * Wan ZongShun <mcuos.com@gmail.com> * @@ -30,31 +30,31 @@ #define GPIO_IN (0x0C) #define GROUPINERV (0x10) #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) -#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip) +#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip) -#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \ +#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \ { \ .chip = { \ .label = name, \ - .direction_input = w90p910_dir_input, \ - .direction_output = w90p910_dir_output, \ - .get = w90p910_gpio_get, \ - .set = w90p910_gpio_set, \ + .direction_input = nuc900_dir_input, \ + .direction_output = nuc900_dir_output, \ + .get = nuc900_gpio_get, \ + .set = nuc900_gpio_set, \ .base = base_gpio, \ .ngpio = nr_gpio, \ } \ } -struct w90p910_gpio_chip { +struct nuc900_gpio_chip { struct gpio_chip chip; void __iomem *regbase; /* Base of group register*/ spinlock_t gpio_lock; }; -static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset) +static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); - void __iomem *pio = w90p910_gpio->regbase + GPIO_IN; + struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + void __iomem *pio = nuc900_gpio->regbase + GPIO_IN; unsigned int regval; regval = __raw_readl(pio); @@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset) return (regval != 0); } -static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { - struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); - void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT; + struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT; unsigned int regval; unsigned long flags; - spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags); regval = __raw_readl(pio); @@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val) __raw_writel(regval, pio); - spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); + spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags); } -static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset) +static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) { - struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); - void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR; + struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; unsigned long flags; - spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags); regval = __raw_readl(pio); regval &= ~GPIO_GPIO(offset); __raw_writel(regval, pio); - spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); + spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags); return 0; } -static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val) +static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val) { - struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); - void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT; - void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR; + struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT; + void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; unsigned long flags; - spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags); regval = __raw_readl(pio); regval |= GPIO_GPIO(offset); @@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val) __raw_writel(regval, outreg); - spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); + spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags); return 0; } -static struct w90p910_gpio_chip w90p910_gpio[] = { - W90P910_GPIO_CHIP("GROUPC", 0, 16), - W90P910_GPIO_CHIP("GROUPD", 16, 10), - W90P910_GPIO_CHIP("GROUPE", 26, 14), - W90P910_GPIO_CHIP("GROUPF", 40, 10), - W90P910_GPIO_CHIP("GROUPG", 50, 17), - W90P910_GPIO_CHIP("GROUPH", 67, 8), - W90P910_GPIO_CHIP("GROUPI", 75, 17), +static struct nuc900_gpio_chip nuc900_gpio[] = { + NUC900_GPIO_CHIP("GROUPC", 0, 16), + NUC900_GPIO_CHIP("GROUPD", 16, 10), + NUC900_GPIO_CHIP("GROUPE", 26, 14), + NUC900_GPIO_CHIP("GROUPF", 40, 10), + NUC900_GPIO_CHIP("GROUPG", 50, 17), + NUC900_GPIO_CHIP("GROUPH", 67, 8), + NUC900_GPIO_CHIP("GROUPI", 75, 17), }; -void __init w90p910_init_gpio(int nr_group) +void __init nuc900_init_gpio(int nr_group) { unsigned i; - struct w90p910_gpio_chip *gpio_chip; + struct nuc900_gpio_chip *gpio_chip; for (i = 0; i < nr_group; i++) { - gpio_chip = &w90p910_gpio[i]; + gpio_chip = &nuc900_gpio[i]; spin_lock_init(&gpio_chip->gpio_lock); gpio_chip->regbase = GPIO_BASE + i * GROUPINERV; gpiochip_add(&gpio_chip->chip); diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h index f10b6a8dc06..516d6b477b6 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-clock.h +++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h @@ -28,4 +28,26 @@ #define REG_CLKEN1 (CLK_BA + 0x24) #define REG_CLKDIV1 (CLK_BA + 0x28) +/* Define PLL freq setting */ +#define PLL_DISABLE 0x12B63 +#define PLL_66MHZ 0x2B63 +#define PLL_100MHZ 0x4F64 +#define PLL_120MHZ 0x4F63 +#define PLL_166MHZ 0x4124 +#define PLL_200MHZ 0x4F24 + +/* Define AHB:CPUFREQ ratio */ +#define AHB_CPUCLK_1_1 0x00 +#define AHB_CPUCLK_1_2 0x01 +#define AHB_CPUCLK_1_4 0x02 +#define AHB_CPUCLK_1_8 0x03 + +/* Define APB:AHB ratio */ +#define APB_AHB_1_2 0x01 +#define APB_AHB_1_4 0x02 +#define APB_AHB_1_8 0x03 + +/* Define clock skew */ +#define DEFAULTSKEW 0x48 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h new file mode 100644 index 00000000000..b68455e7f88 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-ebi.h + * + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_REGS_EBI_H +#define __ASM_ARCH_REGS_EBI_H + +/* EBI Control Registers */ + +#define EBI_BA W90X900_VA_EBI +#define REG_EBICON (EBI_BA + 0x00) +#define REG_ROMCON (EBI_BA + 0x04) +#define REG_SDCONF0 (EBI_BA + 0x08) +#define REG_SDCONF1 (EBI_BA + 0x0C) +#define REG_SDTIME0 (EBI_BA + 0x10) +#define REG_SDTIME1 (EBI_BA + 0x14) +#define REG_EXT0CON (EBI_BA + 0x18) +#define REG_EXT1CON (EBI_BA + 0x1C) +#define REG_EXT2CON (EBI_BA + 0x20) +#define REG_EXT3CON (EBI_BA + 0x24) +#define REG_EXT4CON (EBI_BA + 0x28) +#define REG_CKSKEW (EBI_BA + 0x2C) + +#endif /* __ASM_ARCH_REGS_EBI_H */ diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c index 0b4fc194729..0ce9d8e867e 100644 --- a/arch/arm/mach-w90x900/irq.c +++ b/arch/arm/mach-w90x900/irq.c @@ -10,8 +10,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation;version 2 of the License. * */ @@ -29,9 +28,114 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> -static void w90x900_irq_mask(unsigned int irq) +struct group_irq { + unsigned long gpen; + unsigned int enabled; + void (*enable)(struct group_irq *, int enable); +}; + +static DEFINE_SPINLOCK(groupirq_lock); + +#define DEFINE_GROUP(_name, _ctrlbit, _num) \ +struct group_irq group_##_name = { \ + .enable = nuc900_group_enable, \ + .gpen = ((1 << _num) - 1) << _ctrlbit, \ + } + +static void nuc900_group_enable(struct group_irq *gpirq, int enable); + +static DEFINE_GROUP(nirq0, 0, 4); +static DEFINE_GROUP(nirq1, 4, 4); +static DEFINE_GROUP(usbh, 8, 2); +static DEFINE_GROUP(ottimer, 16, 3); +static DEFINE_GROUP(gdma, 20, 2); +static DEFINE_GROUP(sc, 24, 2); +static DEFINE_GROUP(i2c, 26, 2); +static DEFINE_GROUP(ps2, 28, 2); + +static int group_irq_enable(struct group_irq *group_irq) +{ + unsigned long flags; + + spin_lock_irqsave(&groupirq_lock, flags); + if (group_irq->enabled++ == 0) + (group_irq->enable)(group_irq, 1); + spin_unlock_irqrestore(&groupirq_lock, flags); + + return 0; +} + +static void group_irq_disable(struct group_irq *group_irq) { + unsigned long flags; + + WARN_ON(group_irq->enabled == 0); + + spin_lock_irqsave(&groupirq_lock, flags); + if (--group_irq->enabled == 0) + (group_irq->enable)(group_irq, 0); + spin_unlock_irqrestore(&groupirq_lock, flags); +} + +static void nuc900_group_enable(struct group_irq *gpirq, int enable) +{ + unsigned int groupen = gpirq->gpen; + unsigned long regval; + + regval = __raw_readl(REG_AIC_GEN); + + if (enable) + regval |= groupen; + else + regval &= ~groupen; + + __raw_writel(regval, REG_AIC_GEN); +} + +static void nuc900_irq_mask(unsigned int irq) +{ + struct group_irq *group_irq; + + group_irq = NULL; + __raw_writel(1 << irq, REG_AIC_MDCR); + + switch (irq) { + case IRQ_GROUP0: + group_irq = &group_nirq0; + break; + + case IRQ_GROUP1: + group_irq = &group_nirq1; + break; + + case IRQ_USBH: + group_irq = &group_usbh; + break; + + case IRQ_T_INT_GROUP: + group_irq = &group_ottimer; + break; + + case IRQ_GDMAGROUP: + group_irq = &group_gdma; + break; + + case IRQ_SCGROUP: + group_irq = &group_sc; + break; + + case IRQ_I2CGROUP: + group_irq = &group_i2c; + break; + + case IRQ_P2SGROUP: + group_irq = &group_ps2; + break; + } + + if (group_irq) + group_irq_disable(group_irq); } /* @@ -39,37 +143,71 @@ static void w90x900_irq_mask(unsigned int irq) * to REG_AIC_EOSCR for ACK */ -static void w90x900_irq_ack(unsigned int irq) +static void nuc900_irq_ack(unsigned int irq) { __raw_writel(0x01, REG_AIC_EOSCR); } -static void w90x900_irq_unmask(unsigned int irq) +static void nuc900_irq_unmask(unsigned int irq) { - unsigned long mask; + struct group_irq *group_irq; + + group_irq = NULL; - if (irq == IRQ_T_INT_GROUP) { - mask = __raw_readl(REG_AIC_GEN); - __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN); - __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR); - } __raw_writel(1 << irq, REG_AIC_MECR); + + switch (irq) { + case IRQ_GROUP0: + group_irq = &group_nirq0; + break; + + case IRQ_GROUP1: + group_irq = &group_nirq1; + break; + + case IRQ_USBH: + group_irq = &group_usbh; + break; + + case IRQ_T_INT_GROUP: + group_irq = &group_ottimer; + break; + + case IRQ_GDMAGROUP: + group_irq = &group_gdma; + break; + + case IRQ_SCGROUP: + group_irq = &group_sc; + break; + + case IRQ_I2CGROUP: + group_irq = &group_i2c; + break; + + case IRQ_P2SGROUP: + group_irq = &group_ps2; + break; + } + + if (group_irq) + group_irq_enable(group_irq); } -static struct irq_chip w90x900_irq_chip = { - .ack = w90x900_irq_ack, - .mask = w90x900_irq_mask, - .unmask = w90x900_irq_unmask, +static struct irq_chip nuc900_irq_chip = { + .ack = nuc900_irq_ack, + .mask = nuc900_irq_mask, + .unmask = nuc900_irq_unmask, }; -void __init w90x900_init_irq(void) +void __init nuc900_init_irq(void) { int irqno; __raw_writel(0xFFFFFFFE, REG_AIC_MDCR); for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) { - set_irq_chip(irqno, &w90x900_irq_chip); + set_irq_chip(irqno, &nuc900_irq_chip); set_irq_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c new file mode 100644 index 00000000000..ec05bda946f --- /dev/null +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/mach-w90x900/mach-nuc910evb.c + * + * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche + * + * Copyright (C) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach-types.h> +#include <mach/map.h> + +#include "nuc910.h" + +static void __init nuc910evb_map_io(void) +{ + nuc910_map_io(); + nuc910_init_clocks(); +} + +static void __init nuc910evb_init(void) +{ + nuc910_board_init(); +} + +MACHINE_START(W90P910EVB, "W90P910EVB") + /* Maintainer: Wan ZongShun */ + .phys_io = W90X900_PA_UART, + .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, + .boot_params = 0, + .map_io = nuc910evb_map_io, + .init_irq = nuc900_init_irq, + .init_machine = nuc910evb_init, + .timer = &nuc900_timer, +MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c new file mode 100644 index 00000000000..cef903bcccd --- /dev/null +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/mach-w90x900/mach-nuc950evb.c + * + * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche + * + * Copyright (C) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach-types.h> +#include <mach/map.h> + +#include "nuc950.h" + +static void __init nuc950evb_map_io(void) +{ + nuc950_map_io(); + nuc950_init_clocks(); +} + +static void __init nuc950evb_init(void) +{ + nuc950_board_init(); +} + +MACHINE_START(W90P950EVB, "W90P950EVB") + /* Maintainer: Wan ZongShun */ + .phys_io = W90X900_PA_UART, + .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, + .boot_params = 0, + .map_io = nuc950evb_map_io, + .init_irq = nuc900_init_irq, + .init_machine = nuc950evb_init, + .timer = &nuc900_timer, +MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c new file mode 100644 index 00000000000..e3a46f19f2b --- /dev/null +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/mach-w90x900/mach-nuc960evb.c + * + * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche + * + * Copyright (C) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach-types.h> +#include <mach/map.h> + +#include "nuc960.h" + +static void __init nuc960evb_map_io(void) +{ + nuc960_map_io(); + nuc960_init_clocks(); +} + +static void __init nuc960evb_init(void) +{ + nuc960_board_init(); +} + +MACHINE_START(W90N960EVB, "W90N960EVB") + /* Maintainer: Wan ZongShun */ + .phys_io = W90X900_PA_UART, + .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, + .boot_params = 0, + .map_io = nuc960evb_map_io, + .init_irq = nuc900_init_irq, + .init_machine = nuc960evb_init, + .timer = &nuc900_timer, +MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c deleted file mode 100644 index 7a62bd348e8..00000000000 --- a/arch/arm/mach-w90x900/mach-w90p910evb.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * linux/arch/arm/mach-w90x900/mach-w90p910evb.c - * - * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche - * - * Copyright (C) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach-types.h> - -#include <mach/regs-serial.h> -#include <mach/map.h> - -#include "cpu.h" -/*w90p910 evb norflash driver data */ - -#define W90P910_FLASH_BASE 0xA0000000 -#define W90P910_FLASH_SIZE 0x400000 - -static struct mtd_partition w90p910_flash_partitions[] = { - { - .name = "NOR Partition 1 for kernel (960K)", - .size = 0xF0000, - .offset = 0x10000, - }, - { - .name = "NOR Partition 2 for image (1M)", - .size = 0x100000, - .offset = 0x100000, - }, - { - .name = "NOR Partition 3 for user (2M)", - .size = 0x200000, - .offset = 0x00200000, - } -}; - -static struct physmap_flash_data w90p910_flash_data = { - .width = 2, - .parts = w90p910_flash_partitions, - .nr_parts = ARRAY_SIZE(w90p910_flash_partitions), -}; - -static struct resource w90p910_flash_resources[] = { - { - .start = W90P910_FLASH_BASE, - .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device w90p910_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &w90p910_flash_data, - }, - .resource = w90p910_flash_resources, - .num_resources = ARRAY_SIZE(w90p910_flash_resources), -}; - -/* USB EHCI Host Controller */ - -static struct resource w90x900_usb_ehci_resource[] = { - [0] = { - .start = W90X900_PA_USBEHCIHOST, - .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL; - -struct platform_device w90x900_device_usb_ehci = { - .name = "w90x900-ehci", - .id = -1, - .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource), - .resource = w90x900_usb_ehci_resource, - .dev = { - .dma_mask = &w90x900_device_usb_ehci_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; -EXPORT_SYMBOL(w90x900_device_usb_ehci); - -/* USB OHCI Host Controller */ - -static struct resource w90x900_usb_ohci_resource[] = { - [0] = { - .start = W90X900_PA_USBOHCIHOST, - .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL; -struct platform_device w90x900_device_usb_ohci = { - .name = "w90x900-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource), - .resource = w90x900_usb_ohci_resource, - .dev = { - .dma_mask = &w90x900_device_usb_ohci_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; -EXPORT_SYMBOL(w90x900_device_usb_ohci); - -/*TouchScreen controller*/ - -static struct resource w90x900_ts_resource[] = { - [0] = { - .start = W90X900_PA_ADC, - .end = W90X900_PA_ADC + W90X900_SZ_ADC-1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_ADC, - .end = IRQ_ADC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device w90x900_device_ts = { - .name = "w90x900-ts", - .id = -1, - .resource = w90x900_ts_resource, - .num_resources = ARRAY_SIZE(w90x900_ts_resource), -}; -EXPORT_SYMBOL(w90x900_device_ts); - -/* RTC controller*/ - -static struct resource w90x900_rtc_resource[] = { - [0] = { - .start = W90X900_PA_RTC, - .end = W90X900_PA_RTC + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC, - .end = IRQ_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device w90x900_device_rtc = { - .name = "w90x900-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(w90x900_rtc_resource), - .resource = w90x900_rtc_resource, -}; -EXPORT_SYMBOL(w90x900_device_rtc); - -/* KPI controller*/ - -static struct resource w90x900_kpi_resource[] = { - [0] = { - .start = W90X900_PA_KPI, - .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KPI, - .end = IRQ_KPI, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device w90x900_device_kpi = { - .name = "w90x900-kpi", - .id = -1, - .num_resources = ARRAY_SIZE(w90x900_kpi_resource), - .resource = w90x900_kpi_resource, -}; -EXPORT_SYMBOL(w90x900_device_kpi); - -/* USB Device (Gadget)*/ - -static struct resource w90x900_usbgadget_resource[] = { - [0] = { - .start = W90X900_PA_USBDEV, - .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBD, - .end = IRQ_USBD, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device w90x900_device_usbgadget = { - .name = "w90x900-usbgadget", - .id = -1, - .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource), - .resource = w90x900_usbgadget_resource, -}; -EXPORT_SYMBOL(w90x900_device_usbgadget); - -static struct map_desc w90p910_iodesc[] __initdata = { -}; - -/*Here should be your evb resourse,such as LCD*/ - -static struct platform_device *w90p910evb_dev[] __initdata = { - &w90p910_serial_device, - &w90p910_flash_device, - &w90x900_device_usb_ehci, - &w90x900_device_usb_ohci, - &w90x900_device_ts, - &w90x900_device_rtc, - &w90x900_device_kpi, - &w90x900_device_usbgadget, -}; - -static void __init w90p910evb_map_io(void) -{ - w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc)); - w90p910_init_clocks(); -} - -static void __init w90p910evb_init(void) -{ - platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev)); -} - -MACHINE_START(W90P910EVB, "W90P910EVB") - /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, - .boot_params = 0, - .map_io = w90p910evb_map_io, - .init_irq = w90x900_init_irq, - .init_machine = w90p910evb_init, - .timer = &w90x900_timer, -MACHINE_END diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c deleted file mode 100644 index a3520fefb5e..00000000000 --- a/arch/arm/mach-w90x900/mfp-w90p910.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/arch/arm/mach-w90x900/mfp-w90p910.c - * - * Copyright (c) 2008 Nuvoton technology corporation - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#define REG_MFSEL (W90X900_VA_GCR + 0xC) - -#define GPSELF (0x01 << 1) - -#define GPSELC (0x03 << 2) -#define ENKPI (0x02 << 2) -#define ENNAND (0x01 << 2) - -#define GPSELEI0 (0x01 << 26) -#define GPSELEI1 (0x01 << 27) - -static DECLARE_MUTEX(mfp_sem); - -void mfp_set_groupf(struct device *dev) -{ - unsigned long mfpen; - const char *dev_id; - - BUG_ON(!dev); - - down(&mfp_sem); - - dev_id = dev_name(dev); - - mfpen = __raw_readl(REG_MFSEL); - - if (strcmp(dev_id, "w90p910-emc") == 0) - mfpen |= GPSELF;/*enable mac*/ - else - mfpen &= ~GPSELF;/*GPIOF[9:0]*/ - - __raw_writel(mfpen, REG_MFSEL); - - up(&mfp_sem); -} -EXPORT_SYMBOL(mfp_set_groupf); - -void mfp_set_groupc(struct device *dev) -{ - unsigned long mfpen; - const char *dev_id; - - BUG_ON(!dev); - - down(&mfp_sem); - - dev_id = dev_name(dev); - - mfpen = __raw_readl(REG_MFSEL); - - if (strcmp(dev_id, "w90p910-lcd") == 0) - mfpen |= GPSELC;/*enable lcd*/ - else if (strcmp(dev_id, "w90p910-kpi") == 0) { - mfpen &= (~GPSELC);/*enable kpi*/ - mfpen |= ENKPI; - } else if (strcmp(dev_id, "w90p910-nand") == 0) { - mfpen &= (~GPSELC);/*enable nand*/ - mfpen |= ENNAND; - } else - mfpen &= (~GPSELC);/*GPIOC[14:0]*/ - - __raw_writel(mfpen, REG_MFSEL); - - up(&mfp_sem); -} -EXPORT_SYMBOL(mfp_set_groupc); - -void mfp_set_groupi(struct device *dev, int gpio) -{ - unsigned long mfpen; - const char *dev_id; - - BUG_ON(!dev); - - down(&mfp_sem); - - dev_id = dev_name(dev); - - mfpen = __raw_readl(REG_MFSEL); - - if (strcmp(dev_id, "w90p910-wdog") == 0) - mfpen |= GPSELEI1;/*enable wdog*/ - else if (strcmp(dev_id, "w90p910-atapi") == 0) - mfpen |= GPSELEI0;/*enable atapi*/ - - __raw_writel(mfpen, REG_MFSEL); - - up(&mfp_sem); -} -EXPORT_SYMBOL(mfp_set_groupi); - diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c new file mode 100644 index 00000000000..a47dc9a708e --- /dev/null +++ b/arch/arm/mach-w90x900/mfp.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-w90x900/mfp.c + * + * Copyright (c) 2008 Nuvoton technology corporation + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/io.h> + +#include <mach/hardware.h> + +#define REG_MFSEL (W90X900_VA_GCR + 0xC) + +#define GPSELF (0x01 << 1) + +#define GPSELC (0x03 << 2) +#define ENKPI (0x02 << 2) +#define ENNAND (0x01 << 2) + +#define GPSELEI0 (0x01 << 26) +#define GPSELEI1 (0x01 << 27) + +#define GPIOG0TO1 (0x03 << 14) +#define GPIOG2TO3 (0x03 << 16) +#define ENSPI (0x0a << 14) +#define ENI2C0 (0x01 << 14) +#define ENI2C1 (0x01 << 16) + +static DEFINE_MUTEX(mfp_mutex); + +void mfp_set_groupf(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + mutex_lock(&mfp_mutex); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "nuc900-emc") == 0) + mfpen |= GPSELF;/*enable mac*/ + else + mfpen &= ~GPSELF;/*GPIOF[9:0]*/ + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupf); + +void mfp_set_groupc(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + mutex_lock(&mfp_mutex); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "nuc900-lcd") == 0) + mfpen |= GPSELC;/*enable lcd*/ + else if (strcmp(dev_id, "nuc900-kpi") == 0) { + mfpen &= (~GPSELC);/*enable kpi*/ + mfpen |= ENKPI; + } else if (strcmp(dev_id, "nuc900-nand") == 0) { + mfpen &= (~GPSELC);/*enable nand*/ + mfpen |= ENNAND; + } else + mfpen &= (~GPSELC);/*GPIOC[14:0]*/ + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupc); + +void mfp_set_groupi(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + mutex_lock(&mfp_mutex); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + mfpen &= ~GPSELEI1;/*default gpio16*/ + + if (strcmp(dev_id, "nuc900-wdog") == 0) + mfpen |= GPSELEI1;/*enable wdog*/ + else if (strcmp(dev_id, "nuc900-atapi") == 0) + mfpen |= GPSELEI0;/*enable atapi*/ + else if (strcmp(dev_id, "nuc900-keypad") == 0) + mfpen &= ~GPSELEI0;/*enable keypad*/ + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupi); + +void mfp_set_groupg(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + mutex_lock(&mfp_mutex); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "nuc900-spi") == 0) { + mfpen &= ~(GPIOG0TO1 | GPIOG2TO3); + mfpen |= ENSPI;/*enable spi*/ + } else if (strcmp(dev_id, "nuc900-i2c0") == 0) { + mfpen &= ~(GPIOG0TO1); + mfpen |= ENI2C0;/*enable i2c0*/ + } else if (strcmp(dev_id, "nuc900-i2c1") == 0) { + mfpen &= ~(GPIOG2TO3); + mfpen |= ENI2C1;/*enable i2c1*/ + } else { + mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/ + } + + __raw_writel(mfpen, REG_MFSEL); + + mutex_unlock(&mfp_mutex); +} +EXPORT_SYMBOL(mfp_set_groupg); + diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c new file mode 100644 index 00000000000..656f03b3b62 --- /dev/null +++ b/arch/arm/mach-w90x900/nuc910.c @@ -0,0 +1,60 @@ +/* + * linux/arch/arm/mach-w90x900/nuc910.c + * + * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks + * + * Copyright (c) 2009 Nuvoton corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * NUC910 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> +#include "cpu.h" +#include "clock.h" + +/* define specific CPU platform device */ + +static struct platform_device *nuc910_dev[] __initdata = { + &nuc900_device_ts, + &nuc900_device_rtc, +}; + +/* define specific CPU platform io map */ + +static struct map_desc nuc910evb_iodesc[] __initdata = { + IODESC_ENT(USBEHCIHOST), + IODESC_ENT(USBOHCIHOST), + IODESC_ENT(KPI), + IODESC_ENT(USBDEV), + IODESC_ENT(ADC), +}; + +/*Init NUC910 evb io*/ + +void __init nuc910_map_io(void) +{ + nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc)); +} + +/*Init NUC910 clock*/ + +void __init nuc910_init_clocks(void) +{ + nuc900_init_clocks(); +} + +/*Init NUC910 board info*/ + +void __init nuc910_board_init(void) +{ + nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev)); +} diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h new file mode 100644 index 00000000000..83e9ba5fc26 --- /dev/null +++ b/arch/arm/mach-w90x900/nuc910.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-w90x900/nuc910.h + * + * Copyright (c) 2008 Nuvoton corporation + * + * Header file for NUC900 CPU support + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct map_desc; +struct sys_timer; + +/* core initialisation functions */ + +extern void nuc900_init_irq(void); +extern struct sys_timer nuc900_timer; + +/* extern file from nuc910.c */ + +extern void nuc910_board_init(void); +extern void nuc910_init_clocks(void); +extern void nuc910_map_io(void); diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c new file mode 100644 index 00000000000..149508116d1 --- /dev/null +++ b/arch/arm/mach-w90x900/nuc950.c @@ -0,0 +1,54 @@ +/* + * linux/arch/arm/mach-w90x900/nuc950.c + * + * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * NUC950 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> +#include "cpu.h" + +/* define specific CPU platform device */ + +static struct platform_device *nuc950_dev[] __initdata = { + &nuc900_device_kpi, + &nuc900_device_fmi, +}; + +/* define specific CPU platform io map */ + +static struct map_desc nuc950evb_iodesc[] __initdata = { +}; + +/*Init NUC950 evb io*/ + +void __init nuc950_map_io(void) +{ + nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc)); +} + +/*Init NUC950 clock*/ + +void __init nuc950_init_clocks(void) +{ + nuc900_init_clocks(); +} + +/*Init NUC950 board info*/ + +void __init nuc950_board_init(void) +{ + nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev)); +} diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h new file mode 100644 index 00000000000..98a1148bc5a --- /dev/null +++ b/arch/arm/mach-w90x900/nuc950.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-w90x900/nuc950.h + * + * Copyright (c) 2008 Nuvoton corporation + * + * Header file for NUC900 CPU support + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct map_desc; +struct sys_timer; + +/* core initialisation functions */ + +extern void nuc900_init_irq(void); +extern struct sys_timer nuc900_timer; + +/* extern file from nuc950.c */ + +extern void nuc950_board_init(void); +extern void nuc950_init_clocks(void); +extern void nuc950_map_io(void); diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c new file mode 100644 index 00000000000..8851a3a27ce --- /dev/null +++ b/arch/arm/mach-w90x900/nuc960.c @@ -0,0 +1,54 @@ +/* + * linux/arch/arm/mach-w90x900/nuc960.c + * + * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * NUC960 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> +#include "cpu.h" + +/* define specific CPU platform device */ + +static struct platform_device *nuc960_dev[] __initdata = { + &nuc900_device_kpi, + &nuc900_device_fmi, +}; + +/* define specific CPU platform io map */ + +static struct map_desc nuc960evb_iodesc[] __initdata = { +}; + +/*Init NUC960 evb io*/ + +void __init nuc960_map_io(void) +{ + nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc)); +} + +/*Init NUC960 clock*/ + +void __init nuc960_init_clocks(void) +{ + nuc900_init_clocks(); +} + +/*Init NUC960 board info*/ + +void __init nuc960_board_init(void) +{ + nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev)); +} diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h new file mode 100644 index 00000000000..f0c07cbe3a8 --- /dev/null +++ b/arch/arm/mach-w90x900/nuc960.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-w90x900/nuc960.h + * + * Copyright (c) 2008 Nuvoton corporation + * + * Header file for NUC900 CPU support + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct map_desc; +struct sys_timer; + +/* core initialisation functions */ + +extern void nuc900_init_irq(void); +extern struct sys_timer nuc900_timer; + +/* extern file from nuc960.c */ + +extern void nuc960_board_init(void); +extern void nuc960_init_clocks(void); +extern void nuc960_map_io(void); diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index bcc838f6b39..4128af870b4 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -3,7 +3,7 @@ * * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks * - * Copyright (c) 2008 Nuvoton technology corporation + * Copyright (c) 2009 Nuvoton technology corporation * All rights reserved. * * Wan ZongShun <mcuos.com@gmail.com> @@ -23,6 +23,8 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/mach-types.h> #include <asm/mach/irq.h> @@ -31,49 +33,150 @@ #include <mach/map.h> #include <mach/regs-timer.h> -static unsigned long w90x900_gettimeoffset(void) +#define RESETINT 0x1f +#define PERIOD (0x01 << 27) +#define ONESHOT (0x00 << 27) +#define COUNTEN (0x01 << 30) +#define INTEN (0x01 << 29) + +#define TICKS_PER_SEC 100 +#define PRESCALE 0x63 /* Divider = prescale + 1 */ + +unsigned int timer0_load; + +static void nuc900_clockevent_setmode(enum clock_event_mode mode, + struct clock_event_device *clk) { + unsigned int val; + + val = __raw_readl(REG_TCSR0); + val &= ~(0x03 << 27); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + __raw_writel(timer0_load, REG_TICR0); + val |= (PERIOD | COUNTEN | INTEN | PRESCALE); + break; + + case CLOCK_EVT_MODE_ONESHOT: + val |= (ONESHOT | COUNTEN | INTEN | PRESCALE); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } + + __raw_writel(val, REG_TCSR0); +} + +static int nuc900_clockevent_setnextevent(unsigned long evt, + struct clock_event_device *clk) +{ + unsigned int val; + + __raw_writel(evt, REG_TICR0); + + val = __raw_readl(REG_TCSR0); + val |= (COUNTEN | INTEN | PRESCALE); + __raw_writel(val, REG_TCSR0); + return 0; } +static struct clock_event_device nuc900_clockevent_device = { + .name = "nuc900-timer0", + .shift = 32, + .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = nuc900_clockevent_setmode, + .set_next_event = nuc900_clockevent_setnextevent, + .rating = 300, +}; + /*IRQ handler for the timer*/ -static irqreturn_t -w90x900_timer_interrupt(int irq, void *dev_id) +static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *evt = &nuc900_clockevent_device; + __raw_writel(0x01, REG_TISR); /* clear TIF0 */ + + evt->event_handler(evt); return IRQ_HANDLED; } -static struct irqaction w90x900_timer_irq = { - .name = "w90x900 Timer Tick", +static struct irqaction nuc900_timer0_irq = { + .name = "nuc900-timer0", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = w90x900_timer_interrupt, + .handler = nuc900_timer0_interrupt, }; -/*Set up timer reg.*/ +static void __init nuc900_clockevents_init(unsigned int rate) +{ + nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, + nuc900_clockevent_device.shift); + nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, + &nuc900_clockevent_device); + nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf, + &nuc900_clockevent_device); + nuc900_clockevent_device.cpumask = cpumask_of(0); -static void w90x900_timer_setup(void) + clockevents_register_device(&nuc900_clockevent_device); +} + +static cycle_t nuc900_get_cycles(struct clocksource *cs) { - __raw_writel(0, REG_TCSR0); - __raw_writel(0, REG_TCSR1); - __raw_writel(0, REG_TCSR2); - __raw_writel(0, REG_TCSR3); - __raw_writel(0, REG_TCSR4); - __raw_writel(0x1F, REG_TISR); - __raw_writel(15000000/(100 * 100), REG_TICR0); - __raw_writel(0x68000063, REG_TCSR0); + return ~__raw_readl(REG_TDR1); } -static void __init w90x900_timer_init(void) +static struct clocksource clocksource_nuc900 = { + .name = "nuc900-timer1", + .rating = 200, + .read = nuc900_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init nuc900_clocksource_init(unsigned int rate) { - w90x900_timer_setup(); - setup_irq(IRQ_TIMER0, &w90x900_timer_irq); + unsigned int val; + + __raw_writel(0xffffffff, REG_TICR1); + + val = __raw_readl(REG_TCSR1); + val |= (COUNTEN | PERIOD); + __raw_writel(val, REG_TCSR1); + + clocksource_nuc900.mult = + clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift); + clocksource_register(&clocksource_nuc900); +} + +static void __init nuc900_timer_init(void) +{ + struct clk *ck_ext = clk_get(NULL, "ext"); + unsigned int rate; + + BUG_ON(IS_ERR(ck_ext)); + + rate = clk_get_rate(ck_ext); + clk_put(ck_ext); + rate = rate / (PRESCALE + 0x01); + + /* set a known state */ + __raw_writel(0x00, REG_TCSR0); + __raw_writel(0x00, REG_TCSR1); + __raw_writel(RESETINT, REG_TISR); + timer0_load = (rate / TICKS_PER_SEC); + + setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); + + nuc900_clocksource_init(rate); + nuc900_clockevents_init(rate); } -struct sys_timer w90x900_timer = { - .init = w90x900_timer_init, - .offset = w90x900_gettimeoffset, - .resume = w90x900_timer_setup +struct sys_timer nuc900_timer = { + .init = nuc900_timer_init, }; diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c deleted file mode 100644 index 1c97e4930b7..00000000000 --- a/arch/arm/mach-w90x900/w90p910.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/arm/mach-w90x900/w90p910.c - * - * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * W90P910 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/serial_8250.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/irq.h> - -#include <mach/hardware.h> -#include <mach/regs-serial.h> - -#include "cpu.h" -#include "clock.h" - -/* Initial IO mappings */ - -static struct map_desc w90p910_iodesc[] __initdata = { - IODESC_ENT(IRQ), - IODESC_ENT(GCR), - IODESC_ENT(UART), - IODESC_ENT(TIMER), - IODESC_ENT(EBI), - IODESC_ENT(USBEHCIHOST), - IODESC_ENT(USBOHCIHOST), - IODESC_ENT(ADC), - IODESC_ENT(RTC), - IODESC_ENT(KPI), - IODESC_ENT(USBDEV), - /*IODESC_ENT(LCD),*/ -}; - -/* Initial clock declarations. */ -static DEFINE_CLK(lcd, 0); -static DEFINE_CLK(audio, 1); -static DEFINE_CLK(fmi, 4); -static DEFINE_CLK(dmac, 5); -static DEFINE_CLK(atapi, 6); -static DEFINE_CLK(emc, 7); -static DEFINE_CLK(usbd, 8); -static DEFINE_CLK(usbh, 9); -static DEFINE_CLK(g2d, 10);; -static DEFINE_CLK(pwm, 18); -static DEFINE_CLK(ps2, 24); -static DEFINE_CLK(kpi, 25); -static DEFINE_CLK(wdt, 26); -static DEFINE_CLK(gdma, 27); -static DEFINE_CLK(adc, 28); -static DEFINE_CLK(usi, 29); - -static struct clk_lookup w90p910_clkregs[] = { - DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL), - DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL), - DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL), - DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL), - DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL), - DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL), - DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL), - DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL), - DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL), - DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL), - DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL), - DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL), - DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL), - DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL), - DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL), - DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL), -}; - -/* Initial serial platform data */ - -struct plat_serial8250_port w90p910_uart_data[] = { - W90X900_8250PORT(UART0), -}; - -struct platform_device w90p910_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = w90p910_uart_data, - }, -}; - -/*Init W90P910 evb io*/ - -void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size) -{ - unsigned long idcode = 0x0; - - iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc)); - - idcode = __raw_readl(W90X900PDID); - if (idcode != W90P910_CPUID) - printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode); -} - -/*Init W90P910 clock*/ - -void __init w90p910_init_clocks(void) -{ - clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs)); -} - -static int __init w90p910_init_cpu(void) -{ - return 0; -} - -static int __init w90x900_arch_init(void) -{ - return w90p910_init_cpu(); -} -arch_initcall(w90x900_arch_init); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 6fdcbb70982..5fa8dea5a37 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -16,6 +16,7 @@ #include <linux/kprobes.h> #include <linux/uaccess.h> #include <linux/page-flags.h> +#include <linux/highmem.h> #include <asm/system.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 54b1f721dec..a0b3f36f317 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -80,12 +80,6 @@ #if L_PTE_SHARED != PTE_EXT_SHARED #error PTE shared bit mismatch #endif -#if L_PTE_BUFFERABLE != PTE_BUFFERABLE -#error PTE bufferable bit mismatch -#endif -#if L_PTE_CACHEABLE != PTE_CACHEABLE -#error PTE cacheable bit mismatch -#endif #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48edd8c..ac5c80062b7 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec265b..7677a4a1cef 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } + /* Enable smartidle idlemodes and autoidle */ + if (cpu_is_omap34xx()) { + u32 v = dma_read(OCP_SYSCONFIG); + v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | + DMA_SYSCONFIG_SIDLEMODE_MASK | + DMA_SYSCONFIG_AUTOIDLE); + v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_AUTOIDLE); + dma_write(v , OCP_SYSCONFIG); + } + + /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7fd89ba8d3b..26b387c1242 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void) __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index fc60c4ebcc2..285eaa3a827 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -30,6 +30,17 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + struct omap_chip_id { u8 oc; u8 type; @@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); -int omap_type(void); - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 8c1eae88737..7b939cc0196 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -389,6 +389,21 @@ #define DMA_THREAD_FIFO_25 (0x02 << 14) #define DMA_THREAD_FIFO_50 (0x03 << 14) +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + /* Chaining modes*/ #ifndef CONFIG_ARCH_OMAP1 #define OMAP_DMA_STATIC_CHAIN 0x1 diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 3b281472056..73f483d56ca 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -201,7 +201,7 @@ #define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) #ifdef __ASSEMBLER__ -#define IOMEM(x) x +#define IOMEM(x) (x) #else #define IOMEM(x) ((void __force __iomem *)(x)) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4cf449fa2cb..4a030139901 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 65006df3f1b..4ea73804d21 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -133,7 +133,12 @@ void __init omap_detect_sram(void) if (cpu_is_omap34xx()) { omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; - omap_sram_size = 0x8000; /* 32K */ + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + } else { + omap_sram_size = 0x8000; /* 32K */ + } } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 74bb7cb5da4..0761766b183 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index b5b9c4d46e9..2e170827e0b 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 636cb12711d..579a165c282 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9edf7894eed..da7a61728c1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index f34d0fc69ad..86b9edc6741 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c index d4120038220..6d6b1a468ed 100644 --- a/arch/arm/plat-stmp3xxx/pinmux.c +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -22,7 +22,6 @@ #include <linux/sysdev.h> #include <linux/string.h> #include <linux/bitops.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <mach/hardware.h> diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 33026eff2aa..c8c55b46934 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Jun 20 22:28:39 2009 +# Last update: Sat Sep 12 12:00:16 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1769,7 +1769,7 @@ mx31cicada MACH_MX31CICADA MX31CICADA 1777 mi424wr MACH_MI424WR MI424WR 1778 axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779 at572d940deb MACH_AT572D940DEB AT572D940DEB 1780 -davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781 +davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781 ep9302 MACH_EP9302 EP9302 1782 at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783 cybook3 MACH_CYBOOK3 CYBOOK3 1784 @@ -1962,7 +1962,7 @@ ethernut5 MACH_ETHERNUT5 ETHERNUT5 1971 arm11 MACH_ARM11 ARM11 1972 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 cpupxa255 MACH_CPUPXA255 CPUPXA255 1974 -cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 cheflux MACH_CHEFLUX CHEFLUX 1976 eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977 opcotec MACH_OPCOTEC OPCOTEC 1978 @@ -2249,14 +2249,14 @@ omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_PHRAZER 2261 darwin MACH_DARWIN DARWIN 2262 oratiscomu MACH_ORATISCOMU ORATISCOMU 2263 rtsbc20 MACH_RTSBC20 RTSBC20 2264 -i780 MACH_I780 I780 2265 +sgh_i780 MACH_I780 I780 2265 gemini324 MACH_GEMINI324 GEMINI324 2266 oratislan MACH_ORATISLAN ORATISLAN 2267 oratisalog MACH_ORATISALOG ORATISALOG 2268 oratismadi MACH_ORATISMADI ORATISMADI 2269 oratisot16 MACH_ORATISOT16 ORATISOT16 2270 oratisdesk MACH_ORATISDESK ORATISDESK 2271 -v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272 +v2_ca9 MACH_V2P_CA9 V2P_CA9 2272 sintexo MACH_SINTEXO SINTEXO 2273 cm3389 MACH_CM3389 CM3389 2274 omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275 @@ -2280,3 +2280,132 @@ htcrhodium MACH_HTCRHODIUM HTCRHODIUM 2292 htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293 matrix504 MACH_MATRIX504 MATRIX504 2294 mrfsa MACH_MRFSA MRFSA 2295 +sc_p270 MACH_SC_P270 SC_P270 2296 +atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297 +pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298 +dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299 +leonardo MACH_LEONARDO LEONARDO 2300 +zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301 +dp6xx MACH_DP6XX DP6XX 2302 +bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303 +mahimahi MACH_MAHIMAHI MAHIMAHI 2304 +clickc MACH_CLICKC CLICKC 2305 +zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306 +tazcard MACH_TAZCARD TAZCARD 2307 +tazdev MACH_TAZDEV TAZDEV 2308 +annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309 +annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310 +cerebric MACH_CEREBRIC CEREBRIC 2311 +orca MACH_ORCA ORCA 2312 +pc9260 MACH_PC9260 PC9260 2313 +ems285a MACH_EMS285A EMS285A 2314 +gec2410 MACH_GEC2410 GEC2410 2315 +gec2440 MACH_GEC2440 GEC2440 2316 +mw903 MACH_ARCH_MW903 ARCH_MW903 2317 +mw2440 MACH_MW2440 MW2440 2318 +ecac2378 MACH_ECAC2378 ECAC2378 2319 +tazkiosk MACH_TAZKIOSK TAZKIOSK 2320 +whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321 +sbox9263 MACH_SBOX9263 SBOX9263 2322 +oreo MACH_OREO OREO 2323 +smdk6442 MACH_SMDK6442 SMDK6442 2324 +openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325 +incredible MACH_INCREDIBLE INCREDIBLE 2326 +incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327 +heroct MACH_HEROCT HEROCT 2328 +mmnet1000 MACH_MMNET1000 MMNET1000 2329 +devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330 +devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331 +mx31txtr MACH_MX31TXTR MX31TXTR 2332 +u380 MACH_U380 U380 2333 +oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334 +npcmx50 MACH_NPCMX50 NPCMX50 2335 +mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336 +mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337 +riom MACH_RIOM RIOM 2338 +comcas MACH_COMCAS COMCAS 2339 +wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340 +cm_t35 MACH_CM_T35 CM_T35 2341 +net2big MACH_NET2BIG NET2BIG 2342 +motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343 +igep0020 MACH_IGEP0020 IGEP0020 2344 +igep0010 MACH_IGEP0010 IGEP0010 2345 +mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346 +scat100 MACH_SCAT100 SCAT100 2347 +sanmina MACH_SANMINA SANMINA 2348 +momento MACH_MOMENTO MOMENTO 2349 +nuc9xx MACH_NUC9XX NUC9XX 2350 +nuc910evb MACH_NUC910EVB NUC910EVB 2351 +nuc920evb MACH_NUC920EVB NUC920EVB 2352 +nuc950evb MACH_NUC950EVB NUC950EVB 2353 +nuc945evb MACH_NUC945EVB NUC945EVB 2354 +nuc960evb MACH_NUC960EVB NUC960EVB 2355 +nuc932evb MACH_NUC932EVB NUC932EVB 2356 +nuc900 MACH_NUC900 NUC900 2357 +sd1soc MACH_SD1SOC SD1SOC 2358 +ln2440bc MACH_LN2440BC LN2440BC 2359 +rsbc MACH_RSBC RSBC 2360 +openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361 +hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362 +wayland MACH_WAYLAND WAYLAND 2363 +acnbsx102 MACH_ACNBSX102 ACNBSX102 2364 +hwat91 MACH_HWAT91 HWAT91 2365 +at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366 +csb732 MACH_CSB732 CSB732 2367 +u8500 MACH_U8500 U8500 2368 +huqiu MACH_HUQIU HUQIU 2369 +mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370 +pmt1g MACH_PMT1G PMT1G 2371 +htcelf MACH_HTCELF HTCELF 2372 +armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373 +armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374 +u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375 +csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376 +dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377 +hy9307 MACH_HY9307 HY9307 2378 +aspire_easystore MACH_A_ES A_ES 2379 +davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380 +agama9263 MACH_AGAMA9263 AGAMA9263 2381 +marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382 +flint MACH_FLINT FLINT 2383 +tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384 +sch_m490 MACH_SCH_M490 SCH_M490 2386 +rbl01 MACH_RBL01 RBL01 2387 +omnifi MACH_OMNIFI OMNIFI 2388 +otavalo MACH_OTAVALO OTAVALO 2389 +sienna MACH_SIENNA SIENNA 2390 +htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391 +htc_opal MACH_HTC_OPAL HTC_OPAL 2392 +touchbook MACH_TOUCHBOOK TOUCHBOOK 2393 +latte MACH_LATTE LATTE 2394 +xa200 MACH_XA200 XA200 2395 +nimrod MACH_NIMROD NIMROD 2396 +cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397 +cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398 +tk71 MACH_TK71 TK71 2399 +comham3525 MACH_COMHAM3525 COMHAM3525 2400 +mx31erebus MACH_MX31EREBUS MX31EREBUS 2401 +mcardmx27 MACH_MCARDMX27 MCARDMX27 2402 +paradise MACH_PARADISE PARADISE 2403 +tide MACH_TIDE TIDE 2404 +wzl2440 MACH_WZL2440 WZL2440 2405 +sdrdemo MACH_SDRDEMO SDRDEMO 2406 +ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407 +ecmimg20 MACH_ECMIMG20 ECMIMG20 2408 +omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409 +halo MACH_HALO HALO 2410 +huangshan MACH_HUANGSHAN HUANGSHAN 2411 +vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412 +raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 +raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 +raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 +multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416 +multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417 +tnetv107x MACH_TNETV107X TNETV107X 2418 +snake MACH_SNAKE SNAKE 2419 +cwmx27 MACH_CWMX27 CWMX27 2420 +sch_m480 MACH_SCH_M480 SCH_M480 2421 +platypus MACH_PLATYPUS PLATYPUS 2422 +pss2 MACH_PSS2 PSS2 2423 +davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424 +str9100 MACH_STR9100 STR9100 2425 |