summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/include/asm/perf_event.h4
-rw-r--r--arch/arm/include/asm/socket.h4
-rw-r--r--arch/arm/kernel/perf_event.c4
-rw-r--r--arch/arm/kernel/process.c4
-rw-r--r--arch/arm/kernel/smp.c7
-rw-r--r--arch/arm/mach-bcmring/dma.c1
-rw-r--r--arch/arm/mach-imx/mx31moboard-devboard.c24
-rw-r--r--arch/arm/mach-imx/mx31moboard-marxbot.c24
-rw-r--r--arch/arm/mach-ks8695/leds.c1
-rw-r--r--arch/arm/mach-omap1/lcd_dma.c2
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c4
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c4
-rw-r--r--arch/arm/mach-pxa/pxa3xx-ulpi.c20
-rw-r--r--arch/arm/mach-spear3xx/spear300.c2
-rw-r--r--arch/arm/mach-spear3xx/spear310.c2
-rw-r--r--arch/arm/mach-spear3xx/spear320.c2
-rw-r--r--arch/arm/mach-tegra/include/mach/usb_phy.h2
-rw-r--r--arch/arm/mach-tegra/usb_phy.c4
-rw-r--r--arch/arm/mm/init.c1
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_ehci.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/ulpi.h6
-rw-r--r--arch/arm/plat-mxc/ulpi.c8
-rw-r--r--arch/arm/plat-s3c24xx/pm-simtec.c2
23 files changed, 69 insertions, 65 deletions
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 99cfe360798..7523340afb8 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -12,10 +12,6 @@
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
-/* ARM performance counters start from 1 (in the cp15 accesses) so use the
- * same indexes here for consistency. */
-#define PERF_EVENT_INDEX_OFFSET 1
-
/* ARM perf PMU IDs for use by internal perf clients. */
enum arm_perf_pmu_ids {
ARM_PERF_PMU_ID_XSCALE1 = 0,
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index dec6f9afb3c..6433cadb6ed 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -64,5 +64,9 @@
#define SO_WIFI_STATUS 41
#define SCM_WIFI_STATUS SO_WIFI_STATUS
+#define SO_PEEK_OFF 42
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define SO_NOFCS 43
#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index b2abfa18f13..8a89d3b7626 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -539,6 +539,10 @@ static int armpmu_event_init(struct perf_event *event)
int err = 0;
atomic_t *active_events = &armpmu->active_events;
+ /* does not support taken branch sampling */
+ if (has_branch_stack(event))
+ return -EOPNOTSUPP;
+
if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c253a..c2ae3cd331f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -239,9 +239,7 @@ void cpu_idle(void)
leds_event(led_idle_end);
rcu_idle_exit();
tick_nohz_idle_exit();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
+ schedule_preempt_disabled();
}
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index cdeb727527d..d616ed51e7a 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -295,13 +295,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
*/
percpu_timer_setup();
- while (!cpu_active(cpu))
- cpu_relax();
-
- /*
- * cpu_active bit is set, so it's safe to enalbe interrupts
- * now.
- */
local_irq_enable();
local_fiq_enable();
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 1024396797e..e5fd241fccd 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -35,7 +35,6 @@
#include <linux/pfn.h>
#include <linux/atomic.h>
-#include <linux/sched.h>
#include <mach/dma.h>
/* ---- Public Variables ------------------------------------------------- */
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 0aa25364360..cc285e50728 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -158,7 +158,7 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-static int devboard_isp1105_init(struct otg_transceiver *otg)
+static int devboard_isp1105_init(struct usb_phy *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
@@ -177,7 +177,7 @@ static int devboard_isp1105_init(struct otg_transceiver *otg)
}
-static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -194,18 +194,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
static int __init devboard_usbh1_init(void)
{
- struct otg_transceiver *otg;
+ struct usb_phy *phy;
struct platform_device *pdev;
- otg = kzalloc(sizeof(*otg), GFP_KERNEL);
- if (!otg)
+ phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
return -ENOMEM;
- otg->label = "ISP1105";
- otg->init = devboard_isp1105_init;
- otg->set_vbus = devboard_isp1105_set_vbus;
+ phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+ if (!phy->otg) {
+ kfree(phy);
+ return -ENOMEM;
+ }
+
+ phy->label = "ISP1105";
+ phy->init = devboard_isp1105_init;
+ phy->otg->set_vbus = devboard_isp1105_set_vbus;
- usbh1_pdata.otg = otg;
+ usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
if (IS_ERR(pdev))
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index bb639cbda4e..135c90e3a45 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -272,7 +272,7 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
-static int marxbot_isp1105_init(struct otg_transceiver *otg)
+static int marxbot_isp1105_init(struct usb_phy *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
@@ -291,7 +291,7 @@ static int marxbot_isp1105_init(struct otg_transceiver *otg)
}
-static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
@@ -308,18 +308,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
static int __init marxbot_usbh1_init(void)
{
- struct otg_transceiver *otg;
+ struct usb_phy *phy;
struct platform_device *pdev;
- otg = kzalloc(sizeof(*otg), GFP_KERNEL);
- if (!otg)
+ phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
return -ENOMEM;
- otg->label = "ISP1105";
- otg->init = marxbot_isp1105_init;
- otg->set_vbus = marxbot_isp1105_set_vbus;
+ phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+ if (!phy->otg) {
+ kfree(phy);
+ return -ENOMEM;
+ }
+
+ phy->label = "ISP1105";
+ phy->init = marxbot_isp1105_init;
+ phy->otg->set_vbus = marxbot_isp1105_set_vbus;
- usbh1_pdata.otg = otg;
+ usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
if (IS_ERR(pdev))
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d6f6502ac9b..4bd70754729 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <asm/leds.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 453809359ba..4c5ce7d829c 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap15xx()) {
- printk(KERN_ERR "DMA virtual resulotion is not supported "
+ printk(KERN_ERR "DMA virtual resolution is not supported "
"in 1510 mode\n");
BUG();
}
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index a104d5a80e1..e52108c9aae 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -214,7 +214,7 @@ void __init db88f5281_pci_preinit(void)
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
- printk(KERN_ERR "db88f5281_pci_preinit faield to "
+ printk(KERN_ERR "db88f5281_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
gpio_free(pin);
}
@@ -227,7 +227,7 @@ void __init db88f5281_pci_preinit(void)
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
- printk(KERN_ERR "db88f5281_pci_preinit faield "
+ printk(KERN_ERR "db88f5281_pci_preinit failed "
"to set_irq_type pin %d\n", pin);
gpio_free(pin);
}
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 96438b6b202..e3ce6171147 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -149,7 +149,7 @@ void __init rd88f5182_pci_preinit(void)
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
- printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
gpio_free(pin);
}
@@ -162,7 +162,7 @@ void __init rd88f5182_pci_preinit(void)
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
- printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
gpio_free(pin);
}
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index e28dfb88827..5ead6d480c6 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -33,7 +33,7 @@ struct pxa3xx_u2d_ulpi {
struct clk *clk;
void __iomem *mmio_base;
- struct otg_transceiver *otg;
+ struct usb_phy *otg;
unsigned int ulpi_mode;
};
@@ -79,7 +79,7 @@ static int pxa310_ulpi_poll(void)
return -ETIMEDOUT;
}
-static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
{
int err;
@@ -98,7 +98,7 @@ static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
}
-static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
{
if (pxa310_ulpi_get_phymode() != SYNCH) {
pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
@@ -111,7 +111,7 @@ static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
return pxa310_ulpi_poll();
}
-struct otg_io_access_ops pxa310_ulpi_access_ops = {
+struct usb_phy_io_ops pxa310_ulpi_access_ops = {
.read = pxa310_ulpi_read,
.write = pxa310_ulpi_write,
};
@@ -139,19 +139,19 @@ static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
pxa310_otg_transceiver_rtsm();
- err = otg_init(u2d->otg);
+ err = usb_phy_init(u2d->otg);
if (err) {
pr_err("OTG transceiver init failed");
return err;
}
- err = otg_set_vbus(u2d->otg, 1);
+ err = otg_set_vbus(u2d->otg->otg, 1);
if (err) {
pr_err("OTG transceiver VBUS set failed");
return err;
}
- err = otg_set_host(u2d->otg, host);
+ err = otg_set_host(u2d->otg->otg, host);
if (err)
pr_err("OTG transceiver Host mode set failed");
@@ -189,9 +189,9 @@ static void pxa310_stop_otg_hc(void)
{
pxa310_otg_transceiver_rtsm();
- otg_set_host(u2d->otg, NULL);
- otg_set_vbus(u2d->otg, 0);
- otg_shutdown(u2d->otg);
+ otg_set_host(u2d->otg->otg, NULL);
+ otg_set_vbus(u2d->otg->otg, 0);
+ usb_phy_shutdown(u2d->otg);
}
static void pxa310_u2d_setup_otg_hc(void)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4ade2..4f7f5182dd4 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -469,7 +469,7 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
- printk(KERN_ERR "padmux: registeration failed. err no"
+ printk(KERN_ERR "padmux: registration failed. err no"
": %d\n", ret);
/* Free Mapping, device selection already done */
iounmap(pmx_driver.base);
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 9004cf9f01b..febaa6fcfb6 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -303,6 +303,6 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
ret = pmx_register(&pmx_driver);
if (ret)
- printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ printk(KERN_ERR "padmux: registration failed. err no: %d\n",
ret);
}
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index ee29bef4307..deaaf199612 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -550,6 +550,6 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
ret = pmx_register(&pmx_driver);
if (ret)
- printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ printk(KERN_ERR "padmux: registration failed. err no: %d\n",
ret);
}
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index d4b8f9e298a..de1a0f602b2 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -58,7 +58,7 @@ struct tegra_usb_phy {
struct clk *pad_clk;
enum tegra_usb_phy_mode mode;
void *config;
- struct otg_transceiver *ulpi;
+ struct usb_phy *ulpi;
};
struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 37576a721ae..ad321f9e2bb 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -608,13 +608,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
writel(val, base + ULPI_TIMING_CTRL_1);
/* Fix VbusInvalid due to floating VBUS */
- ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+ ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
if (ret) {
pr_err("%s: ulpi write failed\n", __func__);
return ret;
}
- ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+ ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
if (ret) {
pr_err("%s: ulpi write failed\n", __func__);
return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 5dc7d127a40..245a55a0a5b 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/memblock.h>
#include "mm.h"
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 2c159dc2398..9ffd1bbe615 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -44,7 +44,7 @@ struct mxc_usbh_platform_data {
int (*exit)(struct platform_device *pdev);
unsigned int portsc;
- struct otg_transceiver *otg;
+ struct usb_phy *otg;
};
int mx51_initialize_usb_hw(int port, unsigned int flags);
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
index f9161c96d7b..42bdaca6d7d 100644
--- a/arch/arm/plat-mxc/include/mach/ulpi.h
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -2,15 +2,15 @@
#define __MACH_ULPI_H
#ifdef CONFIG_USB_ULPI
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags);
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
#else
-static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
{
return NULL;
}
#endif
-extern struct otg_io_access_ops mxc_ulpi_access_ops;
+extern struct usb_phy_io_ops mxc_ulpi_access_ops;
#endif /* __MACH_ULPI_H */
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
index 477e45bea1b..d2963427184 100644
--- a/arch/arm/plat-mxc/ulpi.c
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -58,7 +58,7 @@ static int ulpi_poll(void __iomem *view, u32 bit)
return -ETIMEDOUT;
}
-static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+static int ulpi_read(struct usb_phy *otg, u32 reg)
{
int ret;
void __iomem *view = otg->io_priv;
@@ -84,7 +84,7 @@ static int ulpi_read(struct otg_transceiver *otg, u32 reg)
return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
}
-static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
{
int ret;
void __iomem *view = otg->io_priv;
@@ -106,13 +106,13 @@ static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
return ulpi_poll(view, ULPIVW_RUN);
}
-struct otg_io_access_ops mxc_ulpi_access_ops = {
+struct usb_phy_io_ops mxc_ulpi_access_ops = {
.read = ulpi_read,
.write = ulpi_write,
};
EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
-struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
{
return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
}
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 68296b1fe7e..699f9317129 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -52,7 +52,7 @@ static __init int pm_simtec_init(void)
!machine_is_aml_m5900())
return 0;
- printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+ printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;