diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-omap2/board-igep0030.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-zoom-peripherals.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clockdomain.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux34xx.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux44xx.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_twl.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/pm_bus.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/prm2xxx_3xxx.h | 63 | ||||
-rw-r--r-- | arch/arm/mach-omap2/sr_device.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/wd_timer.c | 2 | ||||
-rw-r--r-- | arch/arm/mm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 12 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/voltage.h | 17 |
16 files changed, 116 insertions, 29 deletions
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index bcccd68f185..c88e8f7f28e 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -103,7 +103,7 @@ static struct platform_device igep3_onenand_device = { }, }; -void __init igep3_flash_init(void) +static void __init igep3_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -137,7 +137,7 @@ void __init igep3_flash_init(void) } #else -void __init igep3_flash_init(void) {} +static void __init igep3_flash_init(void) {} #endif static struct regulator_consumer_supply igep3_vmmc1_supply = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3094e200784..e001a048dc0 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/gpio.h> @@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init omap4_ehci_init(void) { int ret; + struct clk *phy_ref_clk; + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + phy_ref_clk = clk_get(NULL, "auxclk3_ck"); + if (IS_ERR(phy_ref_clk)) { + pr_err("Cannot request auxclk3\n"); + goto error1; + } + clk_set_rate(phy_ref_clk, 19200000); + clk_enable(phy_ref_clk); /* disable the power to the usb hub prior to init */ ret = gpio_request(GPIO_HUB_POWER, "hub_power"); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 3fbd0edd712..3d1f9abd566 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -190,7 +190,7 @@ static struct platform_device omap_vwlan_device = { }, }; -struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { +static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), /* ZOOM ref clock is 26 MHz */ .board_ref_clock = 1, @@ -242,7 +242,7 @@ static int zoom_twl_gpio_setup(struct device *dev, } /* EXTMUTE callback function */ -void zoom2_set_hs_extmute(int mute) +static void zoom2_set_hs_extmute(int mute) { gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index de3faa20b46..9b459c26fb8 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -103,9 +103,7 @@ struct clockdomain { const char *name; struct powerdomain *ptr; } pwrdm; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) const u16 clktrctrl_mask; -#endif const u8 flags; const u8 dep_bit; const u8 prcm_partition; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 381f4eb9235..2c9c912f2c4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -978,7 +978,7 @@ static int __init omap2_init_devices(void) arch_initcall(omap2_init_devices); #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -struct omap_device_pm_latency omap_wdt_latency[] = { +static struct omap_device_pm_latency omap_wdt_latency[] = { [0] = { .deactivate_func = omap_device_idle_hwmods, .activate_func = omap_device_enable_hwmods, diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 17bd6394d22..df8d2f2872c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add( return NULL; m = &entry->mux; - memcpy(m, src, sizeof(struct omap_mux_entry)); + entry->mux = *src; #ifdef CONFIG_OMAP_MUX if (omap_mux_copy_names(src, m)) { diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 440c98e9a51..17f80e4ab16 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { * Signals different on CBC package compared to the superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_mux __initdata omap3_cbc_subset[] = { +static struct omap_mux __initdata omap3_cbc_subset[] = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_ball __initdata omap3_cbc_ball[] = { +static struct omap_ball __initdata omap3_cbc_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c index 980f11d45c7..c322e7bdaa1 100644 --- a/arch/arm/mach-omap2/mux44xx.c +++ b/arch/arm/mach-omap2/mux44xx.c @@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_core_cbl_ball[] = { +static struct omap_ball __initdata omap4_core_cbl_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBS) -struct omap_ball __initdata omap4_core_cbs_ball[] = { +static struct omap_ball __initdata omap4_core_cbs_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { +static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { _OMAP4_BALLENTRY(SIM_IO, "h4", NULL), _OMAP4_BALLENTRY(SIM_CLK, "j2", NULL), _OMAP4_BALLENTRY(SIM_RESET, "g2", NULL), diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 15f8c6c1bb0..00e1d2b5368 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -20,6 +20,8 @@ #include <plat/voltage.h> +#include "pm.h" + #define OMAP3_SRI2C_SLAVE_ADDR 0x12 #define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00 #define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01 @@ -60,17 +62,17 @@ static u8 smps_offset; #define REG_SMPS_OFFSET 0xE0 -unsigned long twl4030_vsel_to_uv(const u8 vsel) +static unsigned long twl4030_vsel_to_uv(const u8 vsel) { return (((vsel * 125) + 6000)) * 100; } -u8 twl4030_uv_to_vsel(unsigned long uv) +static u8 twl4030_uv_to_vsel(unsigned long uv) { return DIV_ROUND_UP(uv - 600000, 12500); } -unsigned long twl6030_vsel_to_uv(const u8 vsel) +static unsigned long twl6030_vsel_to_uv(const u8 vsel) { /* * In TWL6030 depending on the value of SMPS_OFFSET @@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel) return ((((vsel - 1) * 125) + 6000)) * 100; } -u8 twl6030_uv_to_vsel(unsigned long uv) +static u8 twl6030_uv_to_vsel(unsigned long uv) { /* * In TWL6030 depending on the value of SMPS_OFFSET diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c index 784989f8f2f..5acd2ab298b 100644 --- a/arch/arm/mach-omap2/pm_bus.c +++ b/arch/arm/mach-omap2/pm_bus.c @@ -20,7 +20,7 @@ #include <plat/omap-pm.h> #ifdef CONFIG_PM_RUNTIME -int omap_pm_runtime_suspend(struct device *dev) +static int omap_pm_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r, ret = 0; @@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev) return ret; }; -int omap_pm_runtime_resume(struct device *dev) +static int omap_pm_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 53d44f6e373..49654c8d18f 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -228,7 +228,67 @@ #ifndef __ASSEMBLER__ - +/* + * Stub omap2xxx/omap3xxx functions so that common files + * continue to build when custom builds are used + */ +#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \ + defined(CONFIG_ARCH_OMAP3)) +static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); +} +static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, + s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +#else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); @@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); +#endif /* CONFIG_ARCH_OMAP4 */ #endif /* diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 786d685c09a..b1e0af18a26 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -27,6 +27,7 @@ #include <plat/voltage.h> #include "control.h" +#include "pm.h" static bool sr_enable_on_init; diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b0c4907ab3c..4067669d96c 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -13,6 +13,8 @@ #include <plat/omap_hwmod.h> +#include "wd_timer.h" + /* * In order to avoid any assumptions from bootloader regarding WDT * settings, WDT module is reset during init. This enables the watchdog diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 49db8b3e4a4..0fe2389febf 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 + depends on CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 1f98e0b9484..ccf2660f415 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -718,7 +718,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_24XX: case METHOD_GPIO_44XX: set_24xx_gpio_triggering(bank, gpio, trigger); - break; + return 0; #endif default: goto bad; @@ -756,8 +756,10 @@ static int gpio_irq_type(unsigned irq, unsigned type) spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); if (retval == 0) { - irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[irq].status |= type; + struct irq_desc *d = irq_to_desc(irq); + + d->status &= ~IRQ_TYPE_SENSE_MASK; + d->status |= type; } spin_unlock_irqrestore(&bank->lock, flags); @@ -1671,7 +1673,9 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + bank_width; j++) { - lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); + struct irq_desc *d = irq_to_desc(j); + + lockdep_set_class(&d->lock, &gpio_lock_class); set_irq_chip_data(j, bank); if (bank_is_mpuio(bank)) set_irq_chip(j, &mpuio_irq_chip); diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 0ff123399f3..5bd204e55c3 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -14,6 +14,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H +#include <linux/err.h> + #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -65,9 +67,6 @@ struct voltagedomain { char *name; }; -/* API to get the voltagedomain pointer */ -struct voltagedomain *omap_voltage_domain_lookup(char *name); - /** * struct omap_volt_data - Omap voltage specific data. * @voltage_nominal: The possible voltage value in uV @@ -131,16 +130,26 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_volt_pmic_info *pmic_info); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); +/* API to get the voltagedomain pointer */ +struct voltagedomain *omap_voltage_domain_lookup(char *name); + int omap_voltage_late_init(void); #else static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) {} + struct omap_volt_pmic_info *pmic_info) +{ + return -EINVAL; +} static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method) {} static inline int omap_voltage_late_init(void) { return -EINVAL; } +static inline struct voltagedomain *omap_voltage_domain_lookup(char *name) +{ + return ERR_PTR(-EINVAL); +} #endif #endif |