diff options
Diffstat (limited to 'arch/arm')
213 files changed, 3649 insertions, 6288 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d423d58f938..4dff801c22e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,6 +38,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -488,7 +489,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select CPU_V7 + select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PINCTRL @@ -644,7 +645,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT - select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -2053,53 +2054,6 @@ menu "CPU Power Management" if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_S3C - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config CPU_FREQ_S3C24XX - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ - select CPU_FREQ_S3C - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config CPU_FREQ_S3C24XX_PLL - bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX - help - Compile in support for changing the PLL frequency from the - S3C24XX series CPUfreq driver. The PLL takes time to settle - after a frequency change, so by default it is not enabled. - - This also means that the PLL tables for the selected CPU(s) will - be built which may increase the size of the kernel image. - -config CPU_FREQ_S3C24XX_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on CPU_FREQ_S3C24XX && DEBUG_FS - help - Export status information via debugfs. - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47374085bef..1ba358ba16b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -309,7 +309,7 @@ define archhelp echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' echo ' uImage - U-Boot wrapped zImage' - echo ' bootpImage - Combined zImage and initial RAM disk' + echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ec..56ffdde091f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -159,6 +159,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ hrefprev60.dtb \ hrefv60plus.dtb \ ccu9540.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ @@ -177,7 +178,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 29b9f15e759..54cb5cf8604 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { chosen { @@ -46,7 +46,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 15 0>; + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -90,23 +90,23 @@ compatible = "gpio-leds"; red { - gpios = <&pioC 10 0>; + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; green { - gpios = <&pioA 5 1>; + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; yellow { - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; blue { - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 5160210f74d..3a1de9eb511 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Somfy Animeo IP"; @@ -123,7 +123,7 @@ usb0: ohci@00500000 { num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 1>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -133,23 +133,23 @@ power_green { label = "power_green"; - gpios = <&pioC 17 0>; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; power_red { label = "power_red"; - gpios = <&pioA 2 0>; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; tx_green { label = "tx_green"; - gpios = <&pioC 19 0>; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; tx_red { label = "tx_red"; - gpios = <&pioC 18 0>; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; }; @@ -160,21 +160,21 @@ keyswitch_in { label = "keyswitch_in"; - gpios = <&pioB 1 0>; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; gpio-key,wakeup; }; error_in { label = "error_in"; - gpios = <&pioB 2 0>; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; gpio-key,wakeup; }; btn { label = "btn"; - gpios = <&pioC 23 0>; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab..550eb772c30 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af974..aee2b1866ce 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -38,12 +39,12 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147..3ee63d128e2 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c4615..46b785064dd 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10d..5b902f9a3af 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index c7aebba4e8e..5ede7678f29 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" +#include "at91sam9g25.dtsi" / { model = "Acme Systems Aria G25"; @@ -156,7 +156,7 @@ /* little green LED in middle of Aria G25 module */ aria_led { label = "aria_led"; - gpios = <&pioB 8 0>; /* PB8 */ + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ linux,default-trigger = "heartbeat"; }; @@ -164,7 +164,7 @@ onewire@0 { compatible = "w1-gpio"; - gpios = <&pioA 21 1>; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_w1_0>; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 5d3ed5aafc6..4aad0d9f546 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -10,7 +10,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -77,25 +80,29 @@ st: timer@fffffd00 { compatible = "atmel,at91rm9200-st"; reg = <0xfffffd00 0x100>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffa4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa4000 0x100>; - interrupts = <20 4 0 21 4 0 22 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 + 21 IRQ_TYPE_LEVEL_HIGH 0 + 22 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@fffb8000 { compatible = "atmel,at91rm9200-i2c"; reg = <0xfffb8000 0x4000>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; #address-cells = <1>; @@ -106,7 +113,7 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -115,7 +122,7 @@ ssc0: ssc@fffd0000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd0000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disable"; @@ -124,7 +131,7 @@ ssc1: ssc@fffd4000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd4000 0x4000>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disable"; @@ -133,7 +140,7 @@ ssc2: ssc@fffd8000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd8000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; status = "disable"; @@ -142,7 +149,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at91rm9200-emac", "cdns,emac"; reg = <0xfffbc000 0x4000>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; @@ -167,234 +174,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A */ - 0 31 0x1 0x1>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = - <0 20 0x1 0x0>; /* PA20 periph A */ + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = - <0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 20 0x1 0x1 /* PB20 periph A with pullup */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; pinctrl_uart1_rts: uart1_rts-0 { atmel,pins = - <1 24 0x1 0x0>; /* PB24 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */ }; pinctrl_uart1_cts: uart1_cts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; pinctrl_uart1_dcd: uart1_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_uart1_ri: uart1_ri-0 { atmel,pins = - <1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; }; uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <0 22 0x1 0x0 /* PA22 periph A */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 31 0x2 0x0>; /* PA31 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */ }; }; uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 6 0x2 0x0>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ }; pinctrl_uart3_rts: uart3_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart3_cts: uart3_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ - 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */ + AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 7 0x1 0x0 /* PA7 periph A */ - 0 8 0x1 0x0 /* PA8 periph A */ - 0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0>; /* PA16 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <1 12 0x2 0x0 /* PB12 periph B */ - 1 13 0x2 0x0 /* PB13 periph B */ - 1 14 0x2 0x0 /* PB14 periph B */ - 1 15 0x2 0x0 /* PB15 periph B */ - 1 16 0x2 0x0 /* PB16 periph B */ - 1 17 0x2 0x0 /* PB17 periph B */ - 1 18 0x2 0x0 /* PB18 periph B */ - 1 19 0x2 0x0>; /* PB19 periph B */ + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */ + AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */ + AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */ + AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */ + AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */ + AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */ + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <1 3 0x2 0x1 /* PB3 periph B with pullup */ - 1 4 0x2 0x1 /* PB4 periph B with pullup */ - 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 8 0x2 0x1 /* PA8 periph B with pullup */ - 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 10 0x2 0x1 /* PA10 periph B with pullup */ - 0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0>; /* PB2 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; ssc2 { pinctrl_ssc2_tx: ssc2_tx-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0>; /* PB14 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */ }; pinctrl_ssc2_rx: ssc2_rx-0 { atmel,pins = - <1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; twi { pinctrl_twi: twi-0 { atmel,pins = - <0 25 0x1 0x2 /* PA25 periph A with multi drive */ - 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */ }; pinctrl_twi_gpio: twi_gpio-0 { atmel,pins = - <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ - 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */ + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -404,7 +411,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -414,7 +421,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +431,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -435,7 +442,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -444,7 +451,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -455,7 +462,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -466,7 +473,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -477,7 +484,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -488,7 +495,7 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; - interrupts = <11 4 2>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; @@ -503,9 +510,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; nand-ecc-mode = "soft"; - gpios = <&pioC 2 0 + gpios = <&pioC 2 GPIO_ACTIVE_HIGH 0 - &pioB 1 0 + &pioB 1 GPIO_ACTIVE_HIGH >; status = "disabled"; }; @@ -513,15 +520,15 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; - interrupts = <23 4 2>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ + &pioA 26 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e586d85f8e2..14058125d12 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; @@ -50,7 +50,7 @@ }; usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 0>; + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -66,19 +66,19 @@ ds2 { label = "green"; - gpios = <&pioB 0 0x1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; - gpios = <&pioB 1 0x1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; - gpios = <&pioB 2 0x1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac23..a776f50f124 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -84,19 +87,23 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 0 27 4 0 28 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 + 27 IRQ_TYPE_LEVEL_HIGH 0 + 28 IRQ_TYPE_LEVEL_HIGH 0>; }; pinctrl@fffff400 { @@ -116,234 +123,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 27 0x1 0x0>; /* PB27 periph A */ + <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */ }; pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A */ - 1 22 0x1 0x0>; /* PB22 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */ }; pinctrl_usart0_dcd: usart0_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_usart0_ri: usart0_ri-0 { atmel,pins = - <1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <1 28 0x1 0x0>; /* PB28 periph A */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <1 29 0x1 0x0>; /* PB29 periph A */ + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 8 0x1 0x1 /* PB8 periph A with pullup */ - 1 9 0x1 0x0>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 10 0x1 0x1 /* PB10 periph A with pullup */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 8 0x2 0x0>; /* PC8 periph B */ + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 10 0x2 0x0>; /* PC10 periph B */ + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 31 0x2 0x1 /* PA31 periph B with pullup */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 12 0x1 0x1 /* PB12 periph A with pullup */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0 /* PA19 periph A */ - 0 20 0x1 0x0 /* PA20 periph A */ - 0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 22 0x2 0x0 /* PA22 periph B */ - 0 23 0x2 0x0 /* PA23 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { atmel,pins = - <0 10 0x2 0x0 /* PA10 periph B */ - 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 1 0x2 0x1 /* PA1 periph B with pullup */ - 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */ + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 4 0x2 0x1 /* PA4 periph B with pullup */ - 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0 /* PB17 periph A */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 20 0x1 0x0 /* PB20 periph A */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ - 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ - 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -353,7 +360,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -363,7 +370,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +381,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -383,7 +390,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -394,7 +401,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -405,7 +412,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -416,7 +423,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -427,7 +434,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4 5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -438,7 +445,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4 5>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -449,7 +456,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -458,14 +465,14 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4 2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fffac000 { compatible = "atmel,at91sam9260-i2c"; reg = <0xfffac000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,7 +481,7 @@ mmc0: mmc@fffa8000 { compatible = "atmel,hsmci"; reg = <0xfffa8000 0x600>; - interrupts = <9 4 0>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -483,7 +490,7 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -494,7 +501,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffc8000 0x200>; - interrupts = <12 4 3>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -505,7 +512,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffcc000 0x200>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -514,7 +521,7 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -567,8 +574,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 0 - &pioC 14 0 + gpios = <&pioC 13 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -577,15 +584,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4 2>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 94b58ab2cc0..d9cf51a01b6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -6,7 +6,10 @@ * Licensed under GPLv2 only. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -72,13 +75,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; }; rstc@fffffd00 { @@ -110,221 +113,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <2 30 0x1 0x0 /* PC30 periph A */ - 2 31 0x1 0x1>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 26 0x1 0x1 /* PA26 periph A with pullup */ - 0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 28 0x1 0x0>; /* PA28 periph A */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 29 0x1 0x0>; /* PA29 periph A */ + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <3 0 0x1 0x1 /* PD0 periph A with pullup */ - 3 1 0x1 0x0>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 7 0x2 0x0>; /* PD7 periph B */ + <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PD8 periph B */ + <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A with pullup */ - 3 3 0x1 0x0>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <3 5 0x2 0x0>; /* PD5 periph B */ + <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <4 6 0x2 0x0>; /* PD6 periph B */ + <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ - 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ + AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <2 25 0x2 0x0 /* PC25 periph B */ - 4 21 0x1 0x0 /* PE21 periph A */ - 4 23 0x1 0x0 /* PE23 periph A */ - 4 24 0x1 0x0 /* PE24 periph A */ - 4 25 0x1 0x0 /* PE25 periph A */ - 4 26 0x1 0x0 /* PE26 periph A */ - 4 27 0x1 0x0 /* PE27 periph A */ - 4 28 0x1 0x0 /* PE28 periph A */ - 4 29 0x1 0x0 /* PE29 periph A */ - 4 30 0x1 0x0>; /* PE30 periph A */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 22 0x2 0x0 /* PC22 periph B */ - 2 23 0x2 0x0 /* PC23 periph B */ - 2 24 0x2 0x0 /* PC24 periph B */ - 2 25 0x2 0x0 /* PC25 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 4 22 0x2 0x0>; /* PE22 periph B */ + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ + AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ + AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 12 0x1 0x0>; /* PA12 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_clk: mmc1_clk-0 { atmel,pins = - <0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { atmel,pins = - <0 21 0x1 0x1 /* PA21 periph A with pullup */ - 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ }; pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { atmel,pins = - <0 23 0x1 0x1 /* PA23 periph A with pullup */ - 0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x2 0x0 /* PB0 periph B */ - 1 1 0x2 0x0 /* PB1 periph B */ - 1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ + AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ + AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x2 0x0 /* PB3 periph B */ - 1 4 0x2 0x0 /* PB4 periph B */ - 1 5 0x2 0x0>; /* PB5 periph B */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ - 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ - 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ - 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ - 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -334,7 +337,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -344,7 +347,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -375,7 +378,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -384,7 +387,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -395,7 +398,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -406,7 +409,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -417,7 +420,7 @@ ssc0: ssc@fff98000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -426,7 +429,7 @@ ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -435,7 +438,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -444,14 +447,14 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4 2>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fff88000 { compatible = "atmel,at91sam9263-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -460,7 +463,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,7 +472,7 @@ mmc1: mmc@fff84000 { compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -486,7 +489,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -497,7 +500,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -515,8 +518,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 0 - &pioD 15 0 + gpios = <&pioA 22 GPIO_ACTIVE_HIGH + &pioD 15 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -525,15 +528,15 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4 2>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 3b82d91e7fc..eff1afb8130 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Atmel at91sam9263ek"; @@ -51,7 +51,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 0>; + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -65,8 +65,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioE 18 0>; - wp-gpios = <&pioE 19 0>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; }; }; @@ -74,8 +74,8 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ - 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ + AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ }; }; }; @@ -141,8 +141,8 @@ usb0: ohci@00a00000 { num-ports = <2>; status = "okay"; - atmel,vbus-gpio = <&pioA 24 0 - &pioA 21 0 + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH >; }; }; @@ -152,13 +152,13 @@ d3 { label = "d3"; - gpios = <&pioB 7 0>; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d2 { label = "d2"; - gpios = <&pioC 29 1>; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; }; @@ -168,14 +168,14 @@ left_click { label = "left_click"; - gpios = <&pioC 5 1>; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioC 4 1>; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 28467fd6bf9..cfd7044616d 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 5427b2dba87..26b0444b0f9 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g15.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g15.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 75ce6e76001..b8e79466014 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index e5324bf9d52..bbfd753112c 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek"; @@ -17,13 +17,13 @@ ds1 { label = "ds1"; - gpios = <&pioA 9 0>; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioA 6 1>; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index 66467b11312..bdb799bad17 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek 2 mmc"; @@ -23,7 +23,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioC 2 0>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; }; }; @@ -31,7 +31,7 @@ mmc0_slot0 { pinctrl_board_mmc0_slot0: mmc0_slot0-board { atmel,pins = - <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */ }; }; }; @@ -43,13 +43,13 @@ ds1 { label = "ds1"; - gpios = <&pioB 9 0>; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioB 8 1>; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6a92c5baef8..c7ffc32918f 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,7 +5,7 @@ * * Licensed under GPLv2. */ -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -34,10 +34,17 @@ board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ }; }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; }; dbgu: serial@fffff200 { @@ -65,7 +72,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,16 +86,7 @@ slot@1 { reg = <1>; bus-width = <4>; - cd-gpios = <&pioC 9 0>; - }; - }; - - pinctrl@fffff400 { - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ - }; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; }; }; @@ -180,14 +178,14 @@ btn3 { label = "Button 3"; - gpios = <&pioA 30 1>; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { label = "Button 4"; - gpios = <&pioA 31 1>; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 5fd32df03f2..b4ec6fe53fc 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a1c511fecdc..1e4c49c584d 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index d6fa8af5072..bebf9f55614 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 6f58ab8d21f..641a9bf89ed 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G35-EK"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bf18a735c37..f0091af6c28 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -83,7 +86,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -95,19 +98,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -130,221 +133,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 19 0x1 0x1 /* PB19 periph A with pullup */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 17 0x2 0x0>; /* PB17 periph B */ + <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 15 0x2 0x0>; /* PB15 periph B */ + <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ }; }; uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 4 0x1 0x1 /* PB4 periph A with pullup */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 16 0x1 0x0>; /* PD16 periph A */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 17 0x1 0x0>; /* PD17 periph A */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <2 9 0x2 0x0>; /* PC9 periph B */ + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <2 11 0x2 0x0>; /* PC11 periph B */ + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 8 0x1 0x1 /* PB9 periph A with pullup */ - 1 9 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <0 23 0x2 0x0>; /* PA23 periph B */ + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <0 24 0x2 0x0>; /* PA24 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0>; /* PA19 periph A */ + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 6 0x2 0x0 /* PA6 periph B */ - 0 7 0x2 0x0 /* PA7 periph B */ - 0 8 0x2 0x0 /* PA8 periph B */ - 0 9 0x2 0x0 /* PA9 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0 /* PA29 periph B */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ + AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A */ - 0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 31 0x1 0x0 /* PA31 periph A */ - 0 22 0x1 0x1 /* PA22 periph A with pullup */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1 /* PA25 periph A with pullup */ - 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = - <0 27 0x1 0x1 /* PA27 periph A with pullup */ - 0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1 /* PA29 periph A with pullup */ - 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A */ - 3 1 0x1 0x0 /* PD1 periph A */ - 3 2 0x1 0x0>; /* PD2 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <3 3 0x1 0x0 /* PD3 periph A */ - 3 4 0x1 0x0 /* PD4 periph A */ - 3 5 0x1 0x0>; /* PD5 periph A */ + <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ + AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A */ - 3 11 0x1 0x0 /* PD11 periph A */ - 3 12 0x1 0x0>; /* PD12 periph A */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <3 13 0x1 0x0 /* PD13 periph A */ - 3 14 0x1 0x0 /* PD14 periph A */ - 3 15 0x1 0x0>; /* PD15 periph A */ + <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ - 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ - 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +377,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -384,7 +387,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -395,7 +398,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -404,7 +407,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -415,7 +418,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -426,7 +429,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -437,7 +440,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4 5>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -448,7 +451,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -457,7 +460,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -466,7 +469,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -475,7 +478,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -484,7 +487,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -493,7 +496,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -533,7 +536,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -544,7 +547,7 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 4 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 13>; dma-names = "rxtx"; #address-cells = <1>; @@ -592,8 +595,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -602,22 +605,22 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 0 /* sda */ - &pioA 21 0 /* scl */ + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 51d9251b5bb..89c50d108d4 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Atmel AT91SAM9M10G45-EK"; @@ -68,7 +68,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 10 0>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 11 0>; - wp-gpios = <&pioD 29 0>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; }; }; @@ -90,15 +90,15 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ - 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ + AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; }; @@ -139,8 +139,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 1 - &pioD 3 1>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { @@ -153,19 +153,19 @@ d8 { label = "d8"; - gpios = <&pioD 30 0>; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d6 { label = "d6"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 1>; + gpios = <&pioD 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; }; @@ -175,45 +175,45 @@ left_click { label = "left_click"; - gpios = <&pioB 6 1>; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioB 7 1>; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; left { label = "Joystick Left"; - gpios = <&pioB 14 1>; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; right { label = "Joystick Right"; - gpios = <&pioB 15 1>; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "Joystick Up"; - gpios = <&pioB 16 1>; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; down { label = "Joystick Down"; - gpios = <&pioB 17 1>; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; enter { label = "Joystick Press"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb..d864f7a9d2e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -7,7 +7,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -57,6 +60,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -77,7 +81,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; shdwc@fffffe10 { @@ -88,7 +92,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -99,19 +103,19 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -133,159 +137,159 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x0>; /* PA0 periph A */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 7 0x1 0x0>; /* PA7 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC23 periph B with pullup */ - 2 22 0x2 0x0>; /* PC22 periph B */ + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 9 0x3 0x1 /* PC9 periph C with pullup */ - 2 8 0x3 0x0>; /* PC8 periph C */ + <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */ + AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x1 /* PC17 periph C with pullup */ - 2 17 0x3 0x0>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ - 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 13 0x2 0x1 /* PA13 periph B with pullup */ - 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */ + AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -295,7 +299,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -305,7 +309,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -315,7 +319,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -326,7 +330,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -335,7 +339,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -344,7 +348,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -353,7 +357,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -362,7 +366,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -371,7 +375,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -380,7 +384,7 @@ i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 13>, <&dma 1 14>; dma-names = "tx", "rx"; @@ -392,7 +396,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 15>, <&dma 1 16>; dma-names = "tx", "rx"; @@ -406,7 +410,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -417,7 +421,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -438,8 +442,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -448,15 +452,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d30e48bd1e9..2e67cd5e47e 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9n12.dtsi" +#include "at91sam9n12.dtsi" / { model = "Atmel AT91SAM9N12-EK"; @@ -55,7 +55,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioA 7 0>; + cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; }; }; @@ -63,7 +63,7 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; }; @@ -95,19 +95,19 @@ d8 { label = "d8"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; d9 { label = "d6"; - gpios = <&pioB 5 1>; + gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { label = "d7"; - gpios = <&pioB 6 0>; + gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -117,7 +117,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 9ac2bc2b4f0..49e94aba938 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -26,16 +26,16 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 16 0x2 0x0 /* PC16 periph B */ - 2 18 0x2 0x0 /* PC18 periph B */ - 2 19 0x2 0x0 /* PC19 periph B */ - 2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 2 28 0x2 0x0 /* PC28 periph B */ - 2 29 0x2 0x0 /* PC29 periph B */ - 2 30 0x2 0x0 /* PC30 periph B */ - 2 31 0x2 0x0>; /* PC31 periph B */ + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e..494864836e8 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -7,11 +7,11 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index ba67d83d17a..1a3d525a1f5 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 6ad19a0d542..343d32818ca 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X35-EK"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1145ac330fb..af91599488e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -85,32 +88,32 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -124,297 +127,297 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; pinctrl_usart3_sck: usart3_sck-0 { atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +427,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; @@ -435,7 +438,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -445,7 +448,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; @@ -457,7 +460,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -466,7 +469,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -477,7 +480,7 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -488,7 +491,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -497,7 +500,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -506,7 +509,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -515,7 +518,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -524,7 +527,7 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; @@ -533,14 +536,14 @@ macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 7>, <&dma0 1 8>; dma-names = "tx", "rx"; @@ -554,7 +557,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 1 5>, <&dma1 1 6>; dma-names = "tx", "rx"; @@ -568,7 +571,7 @@ i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 9>, <&dma0 1 10>; dma-names = "tx", "rx"; @@ -582,7 +585,7 @@ adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -625,7 +628,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -636,7 +639,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -645,7 +648,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; }; @@ -664,8 +667,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -674,22 +677,22 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -703,8 +706,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -718,8 +721,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 347a74a857f..4a5ee5cc115 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -28,7 +28,7 @@ pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { - atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ }; }; }; @@ -75,19 +75,19 @@ pb18 { label = "pb18"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; pd21 { label = "pd21"; - gpios = <&pioD 21 0>; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; }; 1wire_cm { compatible = "w1-gpio"; - gpios = <&pioB 18 0>; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; linux,open-drain; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_1wire_cm>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 1fa48d2bfd8..19c8ebb303f 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "at91sam9x5cm.dtsi" +#include "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; @@ -27,7 +27,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 15 0>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; }; }; @@ -40,7 +40,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 14 0>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; }; }; @@ -60,14 +60,14 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; @@ -86,8 +86,8 @@ usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 + atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index f0052dccf9a..1e12aeff403 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -44,6 +44,7 @@ reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; + arm,primecell-periphid = <0x00241011>; }; gpio: gpio { diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index b6bc4ff17f2..544824b512e 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -326,6 +326,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_gpio: ab8500-gpio { + gpio-controller; + #gpio-cells = <2>; + }; + ab8500-rtc { compatible = "stericsson,ab8500-rtc"; interrupts = <17 0x4 diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 1ea9d34460a..143b6d25bc8 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Ethernut 5"; @@ -40,7 +40,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -52,7 +52,7 @@ status = "okay"; gpios = <0 - &pioC 14 0 + &pioC 14 GPIO_ACTIVE_HIGH 0 >; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 96e50f56943..4d829685fdf 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; @@ -31,7 +31,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -50,4 +50,4 @@ status = "okay"; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 359694c7891..3f94fe8e370 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,7 +19,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { interrupt-parent = <&gic>; @@ -160,6 +160,8 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 170>, <&clock 273>; + clock-names = "sclk_mfc", "mfc"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 524b90846df..382d8c7e290 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -41,6 +41,10 @@ enable-active-high; }; + tmu@100C0000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; @@ -83,6 +87,150 @@ status = "okay"; }; + i2c@13860000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -143,4 +291,25 @@ clock-frequency = <24000000>; }; }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb763d..553bceae896 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -330,6 +330,95 @@ samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_en: lcd-en { + samsung,pins = "gpe3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 91332b72acf..9c01b718d29 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 9a14484c7bb..94eebffe304 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 345cdb51dcb..889cdada1ce 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 54710de8290..b7f358a93bc 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,8 +19,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4210-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; @@ -112,12 +112,17 @@ interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f49cea..6f34d7f6ba7 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4212"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 53bc8bf7798..46c678ee119 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; @@ -43,6 +43,7 @@ #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; status = "okay"; num-slots = <1>; @@ -78,6 +79,7 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; status = "okay"; }; @@ -108,4 +110,199 @@ clock-frequency = <24000000>; }; }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1c21bad32ca..7993641cb32 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -36,6 +36,72 @@ enable-active-high; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <102>; + }; + + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <108>; + }; + + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <103>; + }; + + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <139>; + }; + + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <158>; + }; + + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <28>; + }; + }; + + g2d@10800000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index dd564310d4a..ad316a1ee9e 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -31,8 +31,91 @@ status = "okay"; }; - g2d@10800000 { + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; + }; + + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; + }; + + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; + }; + + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; + }; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389e0a1..e743e677a9e 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412"; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 099cec79e2a..704290f7c5c 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -778,62 +778,6 @@ samsung,pin-drv = <3>; }; - keypad_col0: keypad-col0 { - samsung,pins = "gpl2-0"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col1: keypad-col1 { - samsung,pins = "gpl2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col2: keypad-col2 { - samsung,pins = "gpl2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col3: keypad-col3 { - samsung,pins = "gpl2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col4: keypad-col4 { - samsung,pins = "gpl2-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col5: keypad-col5 { - samsung,pins = "gpl2-5"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col6: keypad-col6 { - samsung,pins = "gpl2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col7: keypad-col7 { - samsung,pins = "gpl2-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - cam_port_b: cam-port-b { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index e3380a7a285..01da194ba32 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4x12-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" / { aliases { @@ -28,14 +28,6 @@ pinctrl3 = &pinctrl_3; }; - combiner:interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; - }; - clock: clock-controller@0x10030000 { compatible = "samsung,exynos4412-clock"; reg = <0x10030000 0x20000>; @@ -77,6 +69,8 @@ compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 02cfc76d002..abc7272c7af 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -449,4 +449,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + fimd: fimd@14400000 { + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + + rtc { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb34c0..e9cdee38509 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -553,6 +553,13 @@ samsung,pin-pud = <0>; samaung,pin-drv = <0>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13400000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 3e0c792e276..35a66dee401 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -37,6 +37,30 @@ }; }; + vdd:fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dbvdd:fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spkvdd:fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; @@ -47,8 +71,17 @@ }; wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; }; @@ -224,6 +257,9 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; }; display-timings { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index d449feb7e14..e79331dba12 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" -/include/ "cros5250-common.dtsi" +#include "exynos5250.dtsi" +#include "cros5250-common.dtsi" / { model = "Google Snow"; @@ -171,6 +171,10 @@ }; }; + rtc { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3ea5c0..0aa9091ed7c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,8 +17,10 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" -/include/ "exynos5250-pinctrl.dtsi" +#include "skeleton.dtsi" +#include "exynos5250-pinctrl.dtsi" + +#include <dt-bindings/clk/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; @@ -72,6 +74,12 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -451,6 +459,10 @@ &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; @@ -465,6 +477,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + clocks = <&clock 307>, <&clock 157>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; }; @@ -475,10 +489,42 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + clocks = <&clock 308>, <&clock 158>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; + + usb3_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>; + }; + }; + usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; @@ -497,6 +543,21 @@ clock-names = "usbhost"; }; + usb2_phy: usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -606,6 +667,8 @@ reg = <0x145b0000 0x1000>; interrupts = <10 3>; interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index ef747b52b67..5b22508050d 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -10,14 +10,14 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SD5v1 board based on EXYNOS5440"; compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index d55042beb5c..f32cd77930a 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -10,18 +10,53 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi { - status = "disabled"; + spi_0: spi@D0000 { + + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; + + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; + }; + + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; + + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; + }; + + }; + }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f6b1c897384..8b6f8f0c917 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,13 +9,17 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5440"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + }; + clock: clock-controller@0x160000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x1000>; @@ -79,8 +83,13 @@ interrupts = <0 57 0>; operating-points = < /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 1200000 1025000 + 1100000 1000000 1000000 975000 + 900000 950000 800000 925000 >; }; @@ -101,14 +110,14 @@ clock-names = "uart", "clk_uart_baud0"; }; - spi { - compatible = "samsung,exynos4210-spi"; - reg = <0xD0000 0x1000>; + spi_0: spi@D0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; interrupts = <0 4 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; clocks = <&clock 21>, <&clock 16>; clock-names = "spi", "spi_busclk0"; }; @@ -184,28 +193,6 @@ compatible = "arm,amba-bus"; interrupt-parent = <&gic>; ranges; - - pdma0: pdma@00121000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 46 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@00120000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 47 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; }; rtc { @@ -214,6 +201,29 @@ interrupts = <0 17 0>, <0 16 0>; clocks = <&clock 21>; clock-names = "rtc"; - status = "disabled"; + }; + + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = <0 30 0>; + clocks = <&clock 23>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; }; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 17136fc7a51..230099bb31c 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { clocks { diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index d2550e0bca2..701153992c6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -141,8 +141,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>; - clock-names = "ipg"; + clocks = <&clks 62>, <&clks 62>; + clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; }; @@ -182,8 +182,8 @@ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50004000 0x4000>; interrupts = <0>; - clocks = <&clks 80>; - clock-names = "ipg"; + clocks = <&clks 80>, <&clks 80>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -210,8 +210,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50010000 0x4000>; - clocks = <&clks 79>; - clock-names = "ipg"; + clocks = <&clks 79>, <&clks 79>; + clock-names = "ipg", "per"; interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index ff4bd4873ed..75bd1138651 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -131,7 +131,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 0>; + clocks = <&clks 53>, <&clks 53>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -142,7 +142,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 0>; + clocks = <&clks 52>, <&clks 52>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -223,7 +223,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 0>; + clocks = <&clks 51>, <&clks 51>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 21bb786c5b3..53fdde69bbf 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -631,7 +631,7 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 845982eaac2..eb83aa039b8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -714,7 +714,7 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3e..02df1914a47 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -94,26 +94,26 @@ led1g { label = "led1:green"; - gpios = <&pioB 0 1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led1r { label = "led1:red"; - gpios = <&pioB 1 1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led2g { label = "led2:green"; - gpios = <&pioB 2 1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; led2r { label = "led2:red"; - gpios = <&pioB 3 1>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; @@ -125,16 +125,16 @@ reset { label = "reset"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; linux,code = <0x100>; gpio-key,wakeup; }; mode { label = "mode"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; linux,code = <0x101>; gpio-key,wakeup; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 317300875f3..ccf9ea242f7 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Phontech MPA 1600"; @@ -62,7 +62,7 @@ monitor_mute { label = "Monitor mute"; - gpios = <&pioC 1 1>; + gpios = <&pioC 1 GPIO_ACTIVE_LOW>; linux,code = <113>; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0..99ba6e14ebf 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 144ae43453c..6076d016b47 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -105,7 +105,6 @@ nand-bus-width = <8>; ti,nand-ecc-opt = "sw"; - gpmc,device-nand; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 387fedb5898..33ffabe9c4c 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Ronetix pm9g45"; @@ -42,15 +42,15 @@ board { pinctrl_board_nand: nand0-board { atmel,pins = - <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; mmc { pinctrl_board_mmc: mmc0-board { atmel,pins = - <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */ }; }; }; @@ -64,7 +64,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 6 0>; + cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ nand-on-flash-bbt; pinctrl-0 = <&pinctrl_board_nand>; - gpios = <&pioD 3 0 - &pioC 14 0 + gpios = <&pioD 3 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; @@ -134,13 +134,13 @@ led0 { label = "led0"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; led1 { label = "led1"; - gpios = <&pioD 31 0>; + gpios = <&pioD 31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -152,13 +152,13 @@ right { label = "SW4"; - gpios = <&pioE 7 1>; + gpios = <&pioE 7 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "SW3"; - gpios = <&pioE 8 1>; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; linux,code = <103>; }; }; diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi new file mode 100644 index 00000000000..527e3193817 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -0,0 +1,173 @@ +/* + * Samsung S3C2416 pinctrl settings + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gph-0", "gph-1"; + samsung,pin-function = <2>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gph-8", "gph-9"; + samsung,pin-function = <2>; + }; + + uart1_data: uart1-data { + samsung,pins = "gph-2", "gph-3"; + samsung,pin-function = <2>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gph-10", "gph-11"; + samsung,pin-function = <2>; + }; + + uart2_data: uart2-data { + samsung,pins = "gph-4", "gph-5"; + samsung,pin-function = <2>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + uart3_data: uart3-data { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + extuart_clk: extuart-clk { + samsung,pins = "gph-12"; + samsung,pin-function = <2>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpe-14", "gpe-15"; + samsung,pin-function = <2>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpe-11", "gpe-12", "gpe-13"; + samsung,pin-function = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpe-5"; + samsung,pin-function = <2>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpe-6"; + samsung,pin-function = <2>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpe-7"; + samsung,pin-function = <2>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpe-8", "gpe-9", "gpe-10"; + samsung,pin-function = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpl-8"; + samsung,pin-function = <2>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpl-9"; + samsung,pin-function = <2>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <2>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gpl-1", "gpl-2", "gpl-3"; + samsung,pin-function = <2>; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts new file mode 100644 index 00000000000..59594cf1599 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK2416 board device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "s3c2416.dtsi" + +/ { + model = "SMDK2416"; + compatible = "samsung,s3c2416"; + + memory { + reg = <0x30000000 0x4000000>; + }; + + serial@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + }; + + serial@50004000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + }; + + serial@50008000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + }; + + serial@5000C000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + }; + + watchdog@53000000 { + status = "okay"; + }; + + rtc@57000000 { + status = "okay"; + }; + + sdhci@4AC00000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; + }; + + sdhci@4A800000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi new file mode 100644 index 00000000000..e6555bdd81b --- /dev/null +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -0,0 +1,79 @@ +/* + * Samsung's S3C2416 SoC device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "s3c24xx.dtsi" +#include "s3c2416-pinctrl.dtsi" + +/ { + model = "Samsung S3C2416 SoC"; + compatible = "samsung,s3c2416"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ejs"; + }; + }; + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2416-irq"; + }; + + pinctrl@56000000 { + compatible = "samsung,s3c2416-pinctrl"; + }; + + serial@50000000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50008000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@5000C000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x5000C000 0x4000>; + interrupts = <1 18 24 4>, <1 18 25 4>; + status = "disabled"; + }; + + sdhci@4AC00000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4AC00000 0x100>; + interrupts = <0 0 21 3>; + status = "disabled"; + }; + + sdhci@4A800000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4A800000 0x100>; + interrupts = <0 0 20 3>; + status = "disabled"; + }; + + watchdog@53000000 { + interrupts = <1 9 27 3>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2416-rtc"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2440-i2c"; + }; +}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi new file mode 100644 index 00000000000..2d1d7dc9418 --- /dev/null +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -0,0 +1,92 @@ +/* + * Samsung's S3C24XX family device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "samsung,s3c24xx"; + interrupt-parent = <&intc>; + + aliases { + pinctrl0 = &pinctrl_0; + }; + + intc:interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + pinctrl_0: pinctrl@56000000 { + reg = <0x56000000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c2410-wakeup-eint"; + interrupts = <0 0 0 3>, + <0 0 1 3>, + <0 0 2 3>, + <0 0 3 3>, + <0 0 4 4>, + <0 0 5 4>; + }; + }; + + timer@51000000 { + compatible = "samsung,s3c2410-pwm"; + reg = <0x51000000 0x1000>; + interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; + #pwm-cells = <4>; + }; + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupts = <1 28 0 4>, <1 28 1 4>; + status = "disabled"; + }; + + serial@50004000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + status = "disabled"; + }; + + serial@50008000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50008000 0x4000>; + interrupts = <1 15 6 4>, <1 15 7 4>; + status = "disabled"; + }; + + watchdog@53000000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x53000000 0x100>; + interrupts = <0 0 9 3>; + status = "disabled"; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupts = <0 0 30 3>, <0 0 8 3>; + status = "disabled"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2410-i2c"; + reg = <0x54000000 0x100>; + interrupts = <0 0 27 3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cc..d5922935523 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -59,7 +62,7 @@ mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -74,12 +77,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; - interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -88,7 +86,7 @@ ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; - interrupts = <38 4 4>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -97,7 +95,7 @@ can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; - interrupts = <40 4 3>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; status = "disabled"; @@ -106,13 +104,13 @@ tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; - interrupts = <18 4 6>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 7>, <&dma0 2 8>; dma-names = "tx", "rx"; @@ -126,7 +124,7 @@ i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; - interrupts = <19 4 6>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 9>, <&dma0 2 10>; dma-names = "tx", "rx"; @@ -140,7 +138,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -149,16 +147,16 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; - interrupts = <13 4 5>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; - interrupts = <34 4 3>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; status = "disabled"; @@ -167,14 +165,14 @@ isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; - interrupts = <37 4 5>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; status = "disabled"; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; - interrupts = <22 4 0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -187,7 +185,7 @@ mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; - interrupts = <23 4 0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 1>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -202,12 +200,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; - interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -216,7 +209,7 @@ ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; - interrupts = <39 4 4>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -225,7 +218,7 @@ can1: can@f8010000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8010000 0x300>; - interrupts = <41 4 3>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; }; @@ -233,13 +226,13 @@ tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; - interrupts = <27 4 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; }; adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg @@ -293,7 +286,7 @@ tsadcc: tsadcc@f8018000 { compatible = "atmel,at91sam9x5-tsadcc"; reg = <0xf8018000 0x4000>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; atmel,tsadcc_clock = <300000>; atmel,filtering_average = <0x03>; atmel,pendet_debounce = <0x08>; @@ -305,7 +298,7 @@ i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; - interrupts = <20 4 6>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 2 11>, <&dma1 2 12>; dma-names = "tx", "rx"; @@ -317,7 +310,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -326,7 +319,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -335,7 +328,7 @@ macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <35 4 3>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; status = "disabled"; @@ -344,7 +337,7 @@ sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { @@ -356,20 +349,20 @@ tdes@f803c000 { compatible = "atmel,sam9g46-tdes"; reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; - interrupts = <30 4 0>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; - interrupts = <31 4 0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -381,7 +374,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <2 4 7>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -413,202 +406,202 @@ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = - <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = - <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = - <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = - <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = - <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = - <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = - <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = - <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = - <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = - <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = - <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = - <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = - <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; can0 { pinctrl_can0_rx_tx: can0_rx_tx { atmel,pins = - <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ }; }; can1 { pinctrl_can1_rx_tx: can1_rx_tx { atmel,pins = - <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ - 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 30 0x1 0x0 /* PB30 periph A */ - 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ - 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ - 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; }; isi { pinctrl_isi: isi-0 { atmel,pins = - <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ - 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ - 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ - 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ - 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ - 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ - 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ - 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ - 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ - 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ - 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { atmel,pins = - <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ }; }; lcd { pinctrl_lcd: lcd-0 { atmel,pins = - <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ - 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ - 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ - 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ - 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ - 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ - 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ - 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ - 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ - 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ - 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ - 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ - 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ - 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ - 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ - 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ - 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ - 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ - 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ - 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ - 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ - 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ - 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ - 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ - 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ - 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ - 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ - 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ - 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ - 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ }; }; macb0 { pinctrl_macb0_data_rgmii: macb0_data_rgmii { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ - 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ - 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ - 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ - 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ - 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ - 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ - 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ }; pinctrl_macb0_data_gmii: macb0_data_gmii { atmel,pins = - <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ - 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ - 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ }; pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ - 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ }; pinctrl_macb0_signal_gmii: macb0_signal_gmii { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ - 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ }; }; @@ -616,252 +609,251 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ - 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ - 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ - 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ - 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ - 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ - 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ - 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ - 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = - <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ - 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ - 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ - 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ - 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = - <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ - 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ - 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ - 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ - 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = - <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ - 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ - 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; mmc2 { pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { atmel,pins = - <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ - 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = - <4 21 0x1 0x1 /* PE21 periph A with pullup */ - 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <6 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioB: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <7 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioC: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <8 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioD: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <9 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioE: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <10 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ - 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ - 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ - 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ - 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ - 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ - 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = - <2 16 0x1 0x0 /* PC16 periph A TK0 */ - 2 17 0x1 0x0 /* PC17 periph A TF0 */ - 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = - <2 19 0x1 0x0 /* PC19 periph A RK0 */ - 2 20 0x1 0x0 /* PC20 periph A RF0 */ - 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = - <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ - 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ - 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = - <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ - 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ - 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <3 17 0x1 0x0 /* PD17 periph A */ - 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = - <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ - 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 28 0x1 0x0 /* PB28 periph A */ - 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = - <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ - 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ - 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = - <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ - 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ - 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = - <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ - 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ }; }; + + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmc: pmc@fffffc00 { @@ -877,7 +869,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <3 4 5>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; }; watchdog@fffffe40 { @@ -889,7 +881,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; }; @@ -899,7 +891,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; - interrupts = <33 4 2>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; ep0 { @@ -1011,14 +1003,14 @@ usb1: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb2: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; @@ -1034,7 +1026,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; - interrupts = <5 4 6>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index fa5d216f1db..027bac7510b 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; @@ -41,7 +41,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c38c9433d7a..99bd0c8e047 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 6bebfcdcb1d..fb8ee11cf28 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; @@ -51,7 +51,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index a488fc4e977..509a53d9cc7 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" +#include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; @@ -48,7 +48,7 @@ pb_user1 { label = "pb_user1"; - gpios = <&pioE 27 0>; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626..1f8050813a5 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3.dtsi" +#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; @@ -85,7 +89,7 @@ d2 { label = "d2"; - gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 4b8830eb206..1c296d6b2f2 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -33,7 +33,7 @@ board { pinctrl_qt1070_irq: qt1070_irq { atmel,pins = - <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 661d7ca9c30..8a9e05d8a4b 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3xcm.dtsi" +#include "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -20,7 +20,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 17 0>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; @@ -62,7 +62,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 18 0>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; @@ -87,32 +87,32 @@ board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = - <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = - <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = - <3 30 0x2 0x0>; /* PD30 periph B */ + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = - <4 24 0x0 0x0>; /* PE24 gpio */ + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = - <4 29 0x0 0x0>; /* PE29 gpio */ + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = - <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ }; }; }; @@ -127,7 +127,7 @@ }; usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioD 29 0>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -135,9 +135,9 @@ usb1: ohci@00600000 { num-ports = <3>; - atmel,vbus-gpio = <&pioD 25 0 - &pioD 26 1 - &pioD 27 1 + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW >; status = "okay"; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index db5db24fd54..da3f02a7d84 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -22,12 +22,13 @@ en_3v3_reg: en_3v3 { compatible = "regulator-fixed"; - regulator-name = "en-3v3-fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio0 26 0x4>; // 26 - startup-delay-us = <5000>; - enable-active-high; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */ + gpio = <&ab8500_gpio 25 0x4>; + startup-delay-us = <5000>; + enable-active-high; }; gpio_keys { diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e..6f82d936894 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726..078ed7f618d 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index 367a16dcd5e..dabe232216b 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9260"; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index dee9c571306..0751a6a979a 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao TNY A9263"; @@ -38,7 +38,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index e1ab64c72db..8456d70bb42 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9G20"; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index 296216058c1..a604107eb47 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9260"; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index e70d229baef..285977682cf 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -30,7 +30,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -93,7 +93,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -105,7 +105,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 6fe05ccb620..f8ec36cb036 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao USB A9263"; @@ -43,7 +43,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -107,7 +107,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 0>; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -119,7 +119,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index ad3eca17c43..5b0ffc1a0b2 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -28,39 +28,39 @@ user_led1 { label = "user_led1"; - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; }; /* * led already used by mother board but active as high * user_led2 { * label = "user_led2"; -* gpios = <&pioB 21 1>; +* gpios = <&pioB 21 GPIO_ACTIVE_LOW>; * }; */ user_led3 { label = "user_led3"; - gpios = <&pioB 22 1>; + gpios = <&pioB 22 GPIO_ACTIVE_LOW>; }; user_led4 { label = "user_led4"; - gpios = <&pioB 23 1>; + gpios = <&pioB 23 GPIO_ACTIVE_LOW>; }; red { label = "red"; - gpios = <&pioB 24 1>; + gpios = <&pioB 24 GPIO_ACTIVE_LOW>; }; orange { label = "orange"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; }; green { label = "green"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; }; }; @@ -71,25 +71,25 @@ user_pb1 { label = "user_pb1"; - gpios = <&pioB 25 1>; + gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; user_pb2 { label = "user_pb2"; - gpios = <&pioB 13 1>; + gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; user_pb3 { label = "user_pb3"; - gpios = <&pioA 26 1>; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; user_pb4 { label = "user_pb4"; - gpios = <&pioC 9 1>; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 2dacb16ce4a..c979c06cf69 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9G20"; diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 52b88d81b7b..3caed0db698 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -15,8 +15,6 @@ #include <linux/smp.h> #include <linux/spinlock.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/mcpm.h> #include <asm/smp.h> #include <asm/smp_plat.h> @@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i static void __cpuinit mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); - gic_secondary_init(0); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 047f2a41530..a8800d36180 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -42,6 +39,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -51,7 +51,8 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_93CX6=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -92,7 +91,23 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_DAVICOM_PHY=y CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTLWIFI=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192CU=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 @@ -112,13 +127,11 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SSB=m CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y @@ -146,14 +156,9 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=m -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_CDC=y +CONFIG_USB_AT91=y +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -168,16 +173,18 @@ CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set @@ -192,7 +199,7 @@ CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_ITU_T=y CONFIG_CRC7=m CONFIG_AVERAGE=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 4ae57a34a58..8b099349c4b 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -1,10 +1,12 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100 # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_AT91_CF=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y -CONFIG_XFRM_USER=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_TUN=m +CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y -CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=y -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=y CONFIG_GPIO_SYSFS=y -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91RM9200_WATCHDOG=y @@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_REISERFS_FS=y +CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y +CONFIG_XZ_DEC_ARMTHUMB=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 892e8287ed7..f50c404f0d3 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -11,7 +10,15 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y CONFIG_MACH_CPU9G20=y @@ -20,10 +27,10 @@ CONFIG_MACH_PORTUXG20=y CONFIG_MACH_STAMP9G20=y CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y -CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y CONFIG_LEDS=y @@ -33,12 +40,14 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set @@ -46,8 +55,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y @@ -56,6 +68,8 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -63,23 +77,36 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -94,12 +121,11 @@ CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -109,15 +135,12 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -125,3 +148,9 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_AT91_DEBUG_LL_DBGU0=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig deleted file mode 100644 index 05618eb694f..00000000000 --- a/arch/arm/configs/at91sam9260_defconfig +++ /dev/null @@ -1,91 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_ARCH_AT91SAM9260_SAM9XE=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_MACH_CAM60=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_MACH_CPU9260=y -CONFIG_MACH_FLEXIBITY=y -CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM9_DT=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_9g10_defconfig index c87beb973b3..9d35cd81c61 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_9g10_defconfig @@ -17,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y +CONFIG_MACH_AT91SAM9G10EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -38,11 +39,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y -CONFIG_LIB80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y @@ -51,17 +52,13 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_USB_ZD1201=m CONFIG_RTL8187=m CONFIG_LIBERTAS=m @@ -118,15 +115,11 @@ CONFIG_SND_AT73C213=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y @@ -147,12 +140,10 @@ CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_FTRACE=y CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 36fed66bd4b..9d72ab68482 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,6 +1,4 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set -CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -48,9 +46,11 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -65,7 +65,6 @@ CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y @@ -73,23 +72,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -98,6 +92,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -107,9 +102,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -124,16 +119,12 @@ CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set CONFIG_SND_USB_AUDIO=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=m @@ -145,22 +136,18 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_FUSE_FS=m +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_FTRACE=y +CONFIG_NLS_UTF8=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 18964cdacd6..08166cd4e7d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -23,8 +22,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -36,6 +33,9 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -45,9 +45,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -CONFIG_CFG80211=y -CONFIG_LIB80211=y -CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -61,13 +58,14 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -76,67 +74,40 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y CONFIG_DAVICOM_PHY=y -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AT76C50X_USB=m -CONFIG_USB_ZD1201=m -CONFIG_RTL8187=m -CONFIG_ATH_COMMON=m -CONFIG_ATH9K=m -CONFIG_CARL9170=m -CONFIG_B43=m -CONFIG_B43_PHY_N=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -CONFIG_RT2X00=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RTL8192CU=m -CONFIG_WL1251=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX_MENU=m -CONFIG_WL12XX=m -CONFIG_WL12XX_SDIO=m -CONFIG_ZD1211RW=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_QT2160=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATMEL=y -CONFIG_FB_UDL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_BACKLIGHT_ATMEL_PWM=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -148,33 +119,25 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_ARM is not set CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_MULTI=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_MULTI=y CONFIG_USB_G_MULTI_CDC=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_LEDS_ATMEL_PWM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y @@ -184,17 +147,14 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y @@ -203,6 +163,8 @@ CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d204..227abf9cc60 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f..d74edbad18f 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set -CONFIG_OMAP_MBOX_FWK=y +CONFIG_MAILBOX=y +CONFIG_OMAP1_MBOX=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y CONFIG_ARCH_OMAP730=y @@ -199,7 +200,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5ab..abbe31937c6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y @@ -204,7 +205,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 4d0dc3c1606..f6e78f83c3c 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -26,7 +26,9 @@ CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -39,6 +41,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -68,6 +73,8 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -95,7 +102,19 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_RTL8187=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -133,9 +152,13 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=y -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ATMELMCI=y @@ -151,18 +174,18 @@ CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133c..f7ba316164d 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac..99207c45ec1 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 7eb18c1d8d6..4f009c10540 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \ atomic64_t, \ counter), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #define cmpxchg64_local(ptr, o, n) \ ((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \ local64_t, \ a), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #endif /* __LINUX_ARM_ARCH__ >= 6 */ diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee2..bdf2b8458ec 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b6..fbd24beeb1f 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f2197031683..282de4826ab 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab90563bf..550d63cef68 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 37d216d814c..ef1703b9587 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu) wait_event_interruptible(*wq, !vcpu->arch.pause); } +static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.target >= 0; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret; sigset_t sigsaved; - /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ - if (unlikely(vcpu->arch.target < 0)) + if (unlikely(!kvm_vcpu_initialized(vcpu))) return -ENOEXEC; ret = kvm_vcpu_first_run_init(vcpu); @@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_SET_ONE_REG: case KVM_GET_ONE_REG: { struct kvm_one_reg reg; + + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®, argp, sizeof(reg))) return -EFAULT; if (ioctl == KVM_SET_ONE_REG) @@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, struct kvm_reg_list reg_list; unsigned n; + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®_list, user_list, sizeof(reg_list))) return -EFAULT; n = reg_list.n; diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 965706578f1..84ba67b982c 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector; static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); + /* + * This function also gets called when dealing with HYP page + * tables. As HYP doesn't have an associated struct kvm (and + * the HYP page tables are fairly static), we don't do + * anything there. + */ + if (kvm) + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void clear_pud_entry(pud_t *pud) +static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } -static void clear_pmd_entry(pmd_t *pmd) +static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { pte_t *pte_table = pte_offset_kernel(pmd, 0); pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } @@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd) return page_count(pmd_page) == 1; } -static void clear_pte_entry(pte_t *pte) +static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { kvm_set_pte(pte, __pte(0)); put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); } } @@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; @@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) } pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); + clear_pte_entry(kvm, pte, addr); range = PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ if (pte_empty(pte)) { - clear_pmd_entry(pmd); + clear_pmd_entry(kvm, pmd, addr); range = PMD_SIZE; if (pmd_empty(pmd)) { - clear_pud_entry(pud); + clear_pud_entry(kvm, pud, addr); range = PUD_SIZE; } } @@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void) mutex_lock(&kvm_hyp_pgd_mutex); if (boot_hyp_pgd) { - unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(boot_hyp_pgd); boot_hyp_pgd = NULL; } if (hyp_pgd) - unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(init_bounce_page); init_bounce_page = NULL; @@ -200,9 +211,10 @@ void free_hyp_pgds(void) if (hyp_pgd) { for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); hyp_pgd = NULL; } @@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - unmap_range(kvm->arch.pgd, start, size); + unmap_range(kvm, kvm->arch.pgd, start, size); } /** @@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 6c24985515a..1a2abd8ed40 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,15 +14,11 @@ config ARCH_AT91RM9200 select SOC_AT91RM9200 config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" + bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" + bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 config ARCH_AT91SAM9263 @@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 @@ -50,6 +42,14 @@ config ARCH_AT91X40 endchoice +config ARCH_AT91SAM9G20 + bool + select ARCH_AT91SAM9260 + +config ARCH_AT91SAM9G10 + bool + select ARCH_AT91SAM9261 + # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -207,76 +207,6 @@ config MACH_FLEXIBITY Select this if you are using Flexibity Connect board <http://www.flexibity.com> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G20 - comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK @@ -341,17 +271,70 @@ config MACH_USB_A9G20 Select this if you are using a Calao Systems USB-A9G20. <http://www.calao-systems.com> +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> endif -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 788562dccb4..f4a5f7998bd 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1df..180b3024bec 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f5..c7d670d1180 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b446645c772..d3437624ca4 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {} */ static struct at73c213_board_info at73c213_data = { .ssc_id = 1, -#if defined(CONFIG_MACH_AT91SAM9261EK) - .shortname = "AT91SAM9261-EK external DAC", -#else - .shortname = "AT91SAM9G10-EK external DAC", -#endif + .shortname = "AT91SAM9261/9G10-EK external DAC", }; #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) @@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_stn_monspecs, .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #else @@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_tft_monspecs, .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #endif @@ -574,6 +564,10 @@ static void __init ek_board_init(void) /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); at91_add_device_serial(); + + if (cpu_is_at91sam9g10()) + ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; + /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ @@ -606,11 +600,17 @@ static void __init ek_board_init(void) at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } -#if defined(CONFIG_MACH_AT91SAM9261EK) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -#else + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") -#endif /* Maintainer: Atmel */ .init_time = at91sam926x_pit_init, .map_io = at91_map_io, diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4..2bd7f51b0b8 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff0ea6..ff18fc2ea46 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304ad0d..f7e504b7874 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include <linux/kernel.h> +#include <linux/bitops.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/io.h> #include <linux/device.h> #include <linux/gpio.h> +#include <clocksource/samsung_pwm.h> #include <linux/sched.h> #include <linux/serial_core.h> #include <linux/of.h> @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -317,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; @@ -370,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, void __init exynos_init_io(struct map_desc *mach_desc, int size) { + debug_ll_io_init(); + #ifdef CONFIG_OF if (initial_boot_params) of_scan_flat_dt(exynos_fdt_map_chipid, NULL); @@ -442,8 +460,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +485,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35cc01a..11fc1e29819 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec13ea..296090e7f42 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include <linux/of.h> #include <mach/regs-pmu.h> +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d4681..74ddb2b5561 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/fimc-core.h> -#include <plat/samsung-time.h> #include <plat/camport.h> #include <mach/map.h> @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 15125900308..4e3148ce852 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,17 +177,18 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; +static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); @@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcaf..627f16f0e9d 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65..c6e1ab54488 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/smp.h> +#include <asm/cacheflush.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187c7ee..4695d5f35fc 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void) pm_power_off = qnap_tsx1x_power_off; } - -/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ -static int __init ts219_pci_init(void) -{ - if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2..f3892289756 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff9022..e1267d6b468 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46..80a8bcacd9d 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e..1c48890bb72 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -54,13 +54,6 @@ void __init armada_370_xp_init_early(void) char *mbus_soc_name; /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 53e8391192c..5476669ba90 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent) /* Add CPU to SMP group - Atomic */ add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET - ldr r2, [r3] +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b /* Enable coherency on CPU - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET - ldr r2, [r3] + add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b dsb diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 222d58c0ae7..3889b6cd211 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o -# DSP -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b..a94b3a718d1 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c deleted file mode 100644 index efc8f207f6f..00000000000 --- a/arch/arm/mach-omap1/mailbox.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Mailbox reservation modules for OMAP1 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <plat/mailbox.h> - -#define MAILBOX_ARM2DSP1 0x00 -#define MAILBOX_ARM2DSP1b 0x04 -#define MAILBOX_DSP2ARM1 0x08 -#define MAILBOX_DSP2ARM1b 0x0c -#define MAILBOX_DSP2ARM2 0x10 -#define MAILBOX_DSP2ARM2b 0x14 -#define MAILBOX_ARM2DSP1_Flag 0x18 -#define MAILBOX_DSP2ARM1_Flag 0x1c -#define MAILBOX_DSP2ARM2_Flag 0x20 - -static void __iomem *mbox_base; - -struct omap_mbox1_fifo { - unsigned long cmd; - unsigned long data; - unsigned long flag; -}; - -struct omap_mbox1_priv { - struct omap_mbox1_fifo tx_fifo; - struct omap_mbox1_fifo rx_fifo; -}; - -static inline int mbox_read_reg(size_t ofs) -{ - return __raw_readw(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writew(val, mbox_base + ofs); -} - -/* msg */ -static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - mbox_msg_t msg; - - msg = mbox_read_reg(fifo->data); - msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; - - return msg; -} - -static void -omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; - - mbox_write_reg(msg & 0xffff, fifo->data); - mbox_write_reg(msg >> 16, fifo->cmd); -} - -static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) -{ - return 0; -} - -static int omap1_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - - return mbox_read_reg(fifo->flag); -} - -/* irq */ -static void -omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - enable_irq(mbox->irq); -} - -static void -omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - disable_irq(mbox->irq); -} - -static int -omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_TX) - return 0; - return 1; -} - -static struct omap_mbox_ops omap1_mbox_ops = { - .type = OMAP_MBOX_TYPE1, - .fifo_read = omap1_mbox_fifo_read, - .fifo_write = omap1_mbox_fifo_write, - .fifo_empty = omap1_mbox_fifo_empty, - .fifo_full = omap1_mbox_fifo_full, - .enable_irq = omap1_mbox_enable_irq, - .disable_irq = omap1_mbox_disable_irq, - .is_irq = omap1_mbox_is_irq, -}; - -/* FIXME: the following struct should be created automatically by the user id */ - -/* DSP */ -static struct omap_mbox1_priv omap1_mbox_dsp_priv = { - .tx_fifo = { - .cmd = MAILBOX_ARM2DSP1b, - .data = MAILBOX_ARM2DSP1, - .flag = MAILBOX_ARM2DSP1_Flag, - }, - .rx_fifo = { - .cmd = MAILBOX_DSP2ARM1b, - .data = MAILBOX_DSP2ARM1, - .flag = MAILBOX_DSP2ARM1_Flag, - }, -}; - -static struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap1_mbox_ops, - .priv = &omap1_mbox_dsp_priv, -}; - -static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; - -static int omap1_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - list = omap1_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap1_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap1_mbox_driver = { - .probe = omap1_mbox_probe, - .remove = omap1_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap1_mbox_init(void) -{ - return platform_driver_register(&omap1_mbox_driver); -} - -static void __exit omap1_mbox_exit(void) -{ - platform_driver_unregister(&omap1_mbox_driver); -} - -module_init(omap1_mbox_init); -module_exit(omap1_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 55a9d677768..f2d19af051e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -203,9 +203,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index c33adea0247..fc20a61f6b2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -112,6 +112,9 @@ struct gpmc_timings nand_default_timings[1] = { .cs_rd_off = 36, .cs_wr_off = 36, + .we_on = 6, + .oe_on = 6, + .adv_on = 6, .adv_rd_off = 24, .adv_wr_off = 36, diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3..af3544ce4f0 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 4269fc14569..73762accd12 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,6 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/platform_data/omap_ocp2scp.h> +#include <linux/platform_data/mailbox-omap.h> #include <linux/usb/omap_control_usb.h> #include <asm/mach-types.h> @@ -327,25 +328,31 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data return 0; } -#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) +#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; + struct omap_mbox_pdata *pdata; oh = omap_hwmod_lookup("mailbox"); if (!oh) { pr_err("%s: unable to find hwmod\n", __func__); return; } + if (!oh->dev_attr) { + pr_err("%s: hwmod doesn't have valid attrs\n", __func__); + return; + } - pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0); + pdata = (struct omap_mbox_pdata *)oh->dev_attr; + pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", __func__, PTR_ERR(pdev)); } #else static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP_MBOX_FWK */ +#endif /* CONFIG_OMAP2PLUS_MBOX */ static inline void omap_init_sti(void) {} diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index d9c27195caf..662c7fd633c 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -43,44 +43,6 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime( - struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_timings *gpmc_t) -{ - struct gpmc_timings t; - int err; - - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_t->sync_clk; - t.cs_on = gpmc_t->cs_on; - t.adv_on = gpmc_t->adv_on; - - /* Read */ - t.adv_rd_off = gpmc_t->adv_rd_off; - t.oe_on = t.adv_on; - t.access = gpmc_t->access; - t.oe_off = gpmc_t->oe_off; - t.cs_rd_off = gpmc_t->cs_rd_off; - t.rd_cycle = gpmc_t->rd_cycle; - - /* Write */ - t.adv_wr_off = gpmc_t->adv_wr_off; - t.we_on = t.oe_on; - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus; - t.wr_access = gpmc_t->wr_access; - } - t.we_off = gpmc_t->we_off; - t.cs_wr_off = gpmc_t->cs_wr_off; - t.wr_cycle = gpmc_t->wr_cycle; - - err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); - if (err) - return err; - - return 0; -} - static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* support only OMAP3 class */ @@ -131,7 +93,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); if (gpmc_t) { - err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); if (err < 0) { dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; @@ -140,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, if (gpmc_nand_data->of_node) { gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); } else { - s.device_nand = true; - /* Enable RD PIN Monitoring Reg */ if (gpmc_nand_data->dev_ready) { s.wait_on_read = true; @@ -149,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, } } + s.device_nand = true; + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) s.device_width = GPMC_DEVWIDTH_16BIT; else diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6c4da1254f5..1c7969e965d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -30,6 +30,7 @@ #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> +#include <linux/pm_runtime.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -155,6 +156,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_cs_num = GPMC_CS_NUM; static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; @@ -521,8 +523,10 @@ static int gpmc_cs_remap(int cs, u32 base) int ret; u32 old_base, size; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; + } gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; @@ -545,9 +549,10 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) struct resource *res = &gpmc_cs_mem[cs]; int r = -1; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; - + } size = gpmc_mem_align(size); if (size > (1 << GPMC_SECTION_SHIFT)) return -ENOMEM; @@ -582,7 +587,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { + if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); @@ -777,7 +782,7 @@ static void gpmc_mem_exit(void) { int cs; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_delete_mem(cs); @@ -798,7 +803,7 @@ static void gpmc_mem_init(void) gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { u32 base, size; if (!gpmc_cs_mem_enabled(cs)) @@ -1245,7 +1250,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); - p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); of_property_read_u32(np, "gpmc,device-width", &p->device_width); of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); @@ -1345,6 +1349,13 @@ static const char * const nand_ecc_opts[] = { [OMAP_ECC_BCH8_CODE_HW] = "bch8", }; +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + static int gpmc_probe_nand_child(struct platform_device *pdev, struct device_node *child) { @@ -1374,6 +1385,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, break; } + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) + for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) + if (!strcasecmp(s, nand_xfer_types[val])) { + gpmc_nand_data->xfer_type = val; + break; + } + val = of_get_nand_bus_width(child); if (val == 16) gpmc_nand_data->devsize = NAND_BUSWIDTH_16; @@ -1513,6 +1531,20 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs", + &gpmc_cs_num); + if (ret < 0) { + pr_err("%s: number of chip-selects not defined\n", __func__); + return ret; + } else if (gpmc_cs_num < 1) { + pr_err("%s: all chip-selects are disabled\n", __func__); + return -EINVAL; + } else if (gpmc_cs_num > GPMC_CS_NUM) { + pr_err("%s: number of supported chip-selects cannot be > %d\n", + __func__, GPMC_CS_NUM); + return -EINVAL; + } + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", &gpmc_nr_waitpins); if (ret < 0) { @@ -1577,7 +1609,8 @@ static int gpmc_probe(struct platform_device *pdev) return PTR_ERR(gpmc_l3_clk); } - clk_prepare_enable(gpmc_l3_clk); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); gpmc_dev = &pdev->dev; @@ -1610,12 +1643,14 @@ static int gpmc_probe(struct platform_device *pdev) /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; - if (!pdev->dev.of_node) + if (!pdev->dev.of_node) { + gpmc_cs_num = GPMC_CS_NUM; gpmc_nr_waitpins = GPMC_NR_WAITPINS; + } rc = gpmc_probe_dt(pdev); if (rc < 0) { - clk_disable_unprepare(gpmc_l3_clk); + pm_runtime_put_sync(&pdev->dev); clk_put(gpmc_l3_clk); dev_err(gpmc_dev, "failed to probe DT parameters\n"); return rc; @@ -1628,10 +1663,30 @@ static int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); gpmc_dev = NULL; return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpmc_suspend(struct device *dev) +{ + omap3_gpmc_save_context(); + pm_runtime_put_sync(dev); + return 0; +} + +static int gpmc_resume(struct device *dev) +{ + pm_runtime_get_sync(dev); + omap3_gpmc_restore_context(); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume); + static struct platform_driver gpmc_driver = { .probe = gpmc_probe, .remove = gpmc_remove, @@ -1639,6 +1694,7 @@ static struct platform_driver gpmc_driver = { .name = DEVICE_NAME, .owner = THIS_MODULE, .of_match_table = of_match_ptr(gpmc_dt_ids), + .pm = &gpmc_pm_ops, }, }; @@ -1701,7 +1757,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) return IRQ_HANDLED; } -#ifdef CONFIG_ARCH_OMAP3 static struct omap3_gpmc_regs gpmc_context; void omap3_gpmc_save_context(void) @@ -1715,7 +1770,7 @@ void omap3_gpmc_save_context(void) gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); if (gpmc_context.cs_context[i].is_valid) { gpmc_context.cs_context[i].config1 = @@ -1747,7 +1802,7 @@ void omap3_gpmc_restore_context(void) gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { if (gpmc_context.cs_context[i].is_valid) { gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, gpmc_context.cs_context[i].config1); @@ -1766,4 +1821,3 @@ void omap3_gpmc_restore_context(void) } } } -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c deleted file mode 100644 index 0b080267b7f..00000000000 --- a/arch/arm/mach-omap2/mailbox.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * Mailbox reservation modules for OMAP2/3 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * and Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/pm_runtime.h> - -#include <plat/mailbox.h> - -#include "soc.h" - -#define MAILBOX_REVISION 0x000 -#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) -#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) -#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) -#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) -#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) - -#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u)) - -#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) -#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) - -#define MBOX_REG_SIZE 0x120 - -#define OMAP4_MBOX_REG_SIZE 0x130 - -#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) -#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32)) - -static void __iomem *mbox_base; - -struct omap_mbox2_fifo { - unsigned long msg; - unsigned long fifo_stat; - unsigned long msg_stat; -}; - -struct omap_mbox2_priv { - struct omap_mbox2_fifo tx_fifo; - struct omap_mbox2_fifo rx_fifo; - unsigned long irqenable; - unsigned long irqstatus; - u32 newmsg_bit; - u32 notfull_bit; - u32 ctx[OMAP4_MBOX_NR_REGS]; - unsigned long irqdisable; -}; - -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq); - -static inline unsigned int mbox_read_reg(size_t ofs) -{ - return __raw_readl(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writel(val, mbox_base + ofs); -} - -/* Mailbox H/W preparations */ -static int omap2_mbox_startup(struct omap_mbox *mbox) -{ - u32 l; - - pm_runtime_enable(mbox->dev->parent); - pm_runtime_get_sync(mbox->dev->parent); - - l = mbox_read_reg(MAILBOX_REVISION); - pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - - return 0; -} - -static void omap2_mbox_shutdown(struct omap_mbox *mbox) -{ - pm_runtime_put_sync(mbox->dev->parent); - pm_runtime_disable(mbox->dev->parent); -} - -/* Mailbox FIFO handle functions */ -static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_msg_t) mbox_read_reg(fifo->msg); -} - -static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - mbox_write_reg(msg, fifo->msg); -} - -static int omap2_mbox_fifo_empty(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_read_reg(fifo->msg_stat) == 0); -} - -static int omap2_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - return mbox_read_reg(fifo->fifo_stat); -} - -/* Mailbox IRQ handle functions */ -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - l = mbox_read_reg(p->irqenable); - l |= bit; - mbox_write_reg(l, p->irqenable); -} - -static void omap2_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - if (!cpu_is_omap44xx()) - bit = mbox_read_reg(p->irqdisable) & ~bit; - - mbox_write_reg(bit, p->irqdisable); -} - -static void omap2_mbox_ack_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - mbox_write_reg(bit, p->irqstatus); - - /* Flush posted write for irq status to avoid spurious interrupts */ - mbox_read_reg(p->irqstatus); -} - -static int omap2_mbox_is_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - u32 enable = mbox_read_reg(p->irqenable); - u32 status = mbox_read_reg(p->irqstatus); - - return (int)(enable & status & bit); -} - -static void omap2_mbox_save_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - if (cpu_is_omap44xx()) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - p->ctx[i] = mbox_read_reg(i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - if (cpu_is_omap44xx()) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - mbox_write_reg(p->ctx[i], i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static struct omap_mbox_ops omap2_mbox_ops = { - .type = OMAP_MBOX_TYPE2, - .startup = omap2_mbox_startup, - .shutdown = omap2_mbox_shutdown, - .fifo_read = omap2_mbox_fifo_read, - .fifo_write = omap2_mbox_fifo_write, - .fifo_empty = omap2_mbox_fifo_empty, - .fifo_full = omap2_mbox_fifo_full, - .enable_irq = omap2_mbox_enable_irq, - .disable_irq = omap2_mbox_disable_irq, - .ack_irq = omap2_mbox_ack_irq, - .is_irq = omap2_mbox_is_irq, - .save_ctx = omap2_mbox_save_ctx, - .restore_ctx = omap2_mbox_restore_ctx, -}; - -/* - * MAILBOX 0: ARM -> DSP, - * MAILBOX 1: ARM <- DSP. - * MAILBOX 2: ARM -> IVA, - * MAILBOX 3: ARM <- IVA. - */ - -/* FIXME: the following structs should be filled automatically by the user id */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2) -/* DSP */ -static struct omap_mbox2_priv omap2_mbox_dsp_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = MAILBOX_IRQENABLE(0), - .irqstatus = MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = MAILBOX_IRQENABLE(0), -}; - -struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_dsp_priv, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP3) -struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL }; -#endif - -#if defined(CONFIG_SOC_OMAP2420) -/* IVA */ -static struct omap_mbox2_priv omap2_mbox_iva_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .fifo_stat = MAILBOX_FIFOSTATUS(2), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .msg_stat = MAILBOX_MSGSTATUS(3), - }, - .irqenable = MAILBOX_IRQENABLE(3), - .irqstatus = MAILBOX_IRQSTATUS(3), - .notfull_bit = MAILBOX_IRQ_NOTFULL(2), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), - .irqdisable = MAILBOX_IRQENABLE(3), -}; - -static struct omap_mbox mbox_iva_info = { - .name = "iva", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_iva_priv, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP2 -struct omap_mbox *omap2_mboxes[] = { - &mbox_dsp_info, -#ifdef CONFIG_SOC_OMAP2420 - &mbox_iva_info, -#endif - NULL -}; -#endif - -#if defined(CONFIG_ARCH_OMAP4) -/* OMAP4 */ -static struct omap_mbox2_priv omap2_mbox_1_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_1_info = { - .name = "mailbox-1", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_1_priv, -}; - -static struct omap_mbox2_priv omap2_mbox_2_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .fifo_stat = MAILBOX_FIFOSTATUS(3), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .msg_stat = MAILBOX_MSGSTATUS(2), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(3), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(2), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_2_info = { - .name = "mailbox-2", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_2_priv, -}; - -struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL }; -#endif - -static int omap2_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - if (false) - ; -#if defined(CONFIG_ARCH_OMAP3) - else if (cpu_is_omap34xx()) { - list = omap3_mboxes; - - list[0]->irq = platform_get_irq(pdev, 0); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) - else if (cpu_is_omap2430()) { - list = omap2_mboxes; - - list[0]->irq = platform_get_irq(pdev, 0); - } else if (cpu_is_omap2420()) { - list = omap2_mboxes; - - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - list[1]->irq = platform_get_irq_byname(pdev, "iva"); - } -#endif -#if defined(CONFIG_ARCH_OMAP4) - else if (cpu_is_omap44xx()) { - list = omap4_mboxes; - - list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0); - } -#endif - else { - pr_err("%s: platform not supported\n", __func__); - return -ENODEV; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap2_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap2_mbox_driver = { - .probe = omap2_mbox_probe, - .remove = omap2_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap2_mbox_init(void) -{ - return platform_driver_register(&omap2_mbox_driver); -} - -static void __exit omap2_mbox_exit(void) -{ - platform_driver_unregister(&omap2_mbox_driver); -} - -module_init(omap2_mbox_init); -module_exit(omap2_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_AUTHOR("Paul Mundt"); -MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe992..7341eff63f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,27 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1405,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1440,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1468,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } @@ -2065,7 +2074,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; @@ -2246,42 +2255,6 @@ static int _idle(struct omap_hwmod *oh) } /** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - -/** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * @@ -3180,38 +3153,6 @@ error: } /** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - -/** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f0..0c898f58ac9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions @@ -641,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5137cc84b50..d8b9d60f854 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -16,6 +16,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -166,6 +167,18 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2420_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 }, + { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 }, +}; + +static struct omap_mbox_pdata omap2420_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, + .info_cnt = ARRAY_SIZE(omap2420_mailbox_info), + .info = omap2420_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, { .name = "iva", .irq = 34 + OMAP_INTC_START, }, @@ -186,6 +199,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2420_mailbox_attrs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4ce999ee3ee..5b9083461dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -17,6 +17,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -170,6 +171,17 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2430_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap2430_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, + .info_cnt = ARRAY_SIZE(omap2430_mailbox_info), + .info = omap2430_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -189,6 +201,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2430_mailbox_attrs, }; /* mcspi3 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1ac..d05fc7b5456 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450..075f7cc5102 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1d..8e4cbc99ce2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -25,6 +25,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/iommu-omap.h> +#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "am35xx.h" @@ -490,6 +491,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +510,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +529,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -1501,6 +1506,17 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; +static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { + .num_users = 2, + .num_fifos = 2, + .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), + .info = omap3xxx_mailbox_info, +}; + static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -1520,6 +1536,7 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap3xxx_mailbox_attrs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0..848b6dc6759 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e91..f6601563aa6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89..f8a6db9239b 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index 13bae78b215..b1022f4315f 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -4,7 +4,6 @@ config ARCH_PICOXCELL select ARM_PATCH_PHYS_VIRT select ARM_VIC select CPU_V6K - select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select HAVE_TCM diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index 70b441ad1d1..7cde0424d33 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -15,7 +15,6 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/dw_apb_timer.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -88,7 +87,6 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .map_io = picoxcell_map_io, .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, - .init_time = dw_apb_timer_init, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, .restart = picoxcell_wdt_restart, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2f7088bfd2..7ef71198fc1 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,7 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_HRT help @@ -204,27 +204,38 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. +config S3C24XX_PLL + bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" + depends on ARM_S3C24XX + help + Compile in support for changing the PLL frequency from the + S3C24XX series CPUfreq driver. The PLL takes time to settle + after a frequency change, so by default it is not enabled. + + This also means that the PLL tables for the selected CPU(s) will + be built which may increase the size of the kernel image. + # cpu frequency items common between s3c2410 and s3c2440/s3c2442 config S3C2410_IOTIMING bool - depends on CPU_FREQ_S3C24XX + depends on ARM_S3C24XX_CPUFREQ help Internal node to select io timing code that is common to the s3c2410 and s3c2440/s3c2442 cpu frequency support. config S3C2410_CPUFREQ_UTILS - bool - depends on CPU_FREQ_S3C24XX - help - Internal node to select timing code that is common to the s3c2410 - and s3c2440/s3c244 cpu frequency support. + bool + depends on ARM_S3C24XX_CPUFREQ + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. # cpu frequency support common to s3c2412, s3c2413 and s3c2442 config S3C2412_IOTIMING bool - depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) help Intel node to select io timing code that is common to the s3c2412 and the s3c2443. @@ -233,16 +244,9 @@ config S3C2412_IOTIMING if CPU_S3C2410 -config S3C2410_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2410 - config S3C2410_PLL bool - depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL default y help Select the PLL table for the S3C2410 @@ -278,7 +282,7 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE - select S3C2410_IOTIMING if S3C2410_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM @@ -385,14 +389,6 @@ config CPU_S3C2412_ONLY !CPU_S3C2442 && !CPU_S3C2443 default y -config S3C2412_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - config S3C2412_DMA bool help @@ -490,18 +486,22 @@ config MACH_SMDK2416 help Say Y here if you are using an SMDK2416 +config MACH_S3C2416_DT + bool "Samsung S3C2416 machine using devicetree" + select CLKSRC_OF + select USE_OF + select PINCTRL + select PINCTRL_S3C24XX + help + Machine support for Samsung S3C2416 machines with device tree enabled. + Select this if a fdt blob is available for the S3C2416 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endif # CPU_S3C2416 if CPU_S3C2440 -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - default y - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config S3C2440_DMA bool help @@ -521,15 +521,15 @@ config S3C2440_XTAL_16934400 config S3C2440_PLL_12000000 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. @@ -583,7 +583,7 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK select S3C24XX_GPIO_EXTRA128 @@ -655,7 +655,7 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 select S3C24XX_DCLK select S3C24XX_PWM diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6f46ecfc839..7f54e5b954c 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -17,13 +17,11 @@ obj- := obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o -obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o @@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o -obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o @@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o -obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o -obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o - # # machine support # following is ordered alphabetically by option text. @@ -85,6 +79,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c deleted file mode 100644 index 9b7b4289d66..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - debugfs status support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/err.h> - -#include <plat/cpu-freq-core.h> - -static struct dentry *dbgfs_root; -static struct dentry *dbgfs_file_io; -static struct dentry *dbgfs_file_info; -static struct dentry *dbgfs_file_board; - -#define print_ns(x) ((x) / 10), ((x) % 10) - -static void show_max(struct seq_file *seq, struct s3c_freq *f) -{ - seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", - f->fclk, f->hclk, f->pclk, f->armclk); -} - -static int board_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - struct s3c_cpufreq_board *brd; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - brd = cfg->board; - if (!brd) { - seq_printf(seq, "no board definition set?\n"); - return 0; - } - - seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); - seq_printf(seq, "auto_io=%u\n", brd->auto_io); - seq_printf(seq, "need_io=%u\n", brd->need_io); - - show_max(seq, &brd->max); - - - return 0; -} - -static int fops_board_open(struct inode *inode, struct file *file) -{ - return single_open(file, board_show, NULL); -} - -static const struct file_operations fops_board = { - .open = fops_board_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int info_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); - seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", - cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); - seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); - seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); - seq_printf(seq, "\n"); - - show_max(seq, &cfg->max); - - seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", - cfg->divs.h_divisor, cfg->divs.p_divisor, - cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); - seq_printf(seq, "\n"); - - seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); - - return 0; -} - -static int fops_info_open(struct inode *inode, struct file *file) -{ - return single_open(file, info_show, NULL); -} - -static const struct file_operations fops_info = { - .open = fops_info_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int io_show(struct seq_file *seq, void *p) -{ - void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); - struct s3c_cpufreq_config *cfg; - struct s3c_iotimings *iot; - union s3c_iobank *iob; - int bank; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - show_bank = cfg->info->debug_io_show; - if (!show_bank) { - seq_printf(seq, "no code to show bank timing\n"); - return 0; - } - - iot = s3c_cpufreq_getiotimings(); - if (!iot) { - seq_printf(seq, "no io timings registered\n"); - return 0; - } - - seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); - - for (bank = 0; bank < MAX_BANKS; bank++) { - iob = &iot->bank[bank]; - - seq_printf(seq, "bank %d: ", bank); - - if (!iob->io_2410) { - seq_printf(seq, "nothing set\n"); - continue; - } - - show_bank(seq, cfg, iob); - } - - return 0; -} - -static int fops_io_open(struct inode *inode, struct file *file) -{ - return single_open(file, io_show, NULL); -} - -static const struct file_operations fops_io = { - .open = fops_io_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - - -static int __init s3c_freq_debugfs_init(void) -{ - dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); - if (IS_ERR(dbgfs_root)) { - printk(KERN_ERR "%s: error creating debugfs root\n", __func__); - return PTR_ERR(dbgfs_root); - } - - dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, - NULL, &fops_io); - - dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, - NULL, &fops_info); - - dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, - NULL, &fops_board); - - return 0; -} - -late_initcall(s3c_freq_debugfs_init); - diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c deleted file mode 100644 index cfa0dd8723e..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ - -static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - u32 clkdiv = 0; - - if (cfg->divs.h_divisor == 2) - clkdiv |= S3C2410_CLKDIVN_HDIVN; - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2410_CLKDIVN_PDIVN; - - __raw_writel(clkdiv, S3C2410_CLKDIVN); -} - -static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long hclk, fclk, pclk; - unsigned int hdiv, pdiv; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - hclk_max = cfg->max.hclk; - - cfg->freq.armclk = fclk; - - s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", - __func__, fclk, hclk_max); - - hdiv = (fclk > cfg->max.hclk) ? 2 : 1; - hclk = fclk / hdiv; - - if (hclk > cfg->max.hclk) { - s3c_freq_dbg("%s: hclk too big\n", __func__); - return -EINVAL; - } - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - pclk = hclk / pdiv; - - if (pclk > cfg->max.pclk) { - s3c_freq_dbg("%s: pclk too big\n", __func__); - return -EINVAL; - } - - pdiv *= hdiv; - - /* record the result */ - cfg->divs.p_divisor = pdiv; - cfg->divs.h_divisor = hdiv; - - return 0; -} - -static struct s3c_cpufreq_info s3c2410_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - /* transition latency is about 5ms worst-case, so - * set 10ms to be sure */ - .latency = 10000000, - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 12, - - .need_pll = 1, - - .name = "s3c2410", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .resume_clocks = s3c2410_setup_clocks, - - .set_fvco = s3c2410_set_fvco, - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2410_cpufreq_setdivs, - .calc_divs = s3c2410_cpufreq_calcdivs, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2410_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - return s3c_cpufreq_register(&s3c2410_cpufreq_info); -} - -static struct subsys_interface s3c2410_cpufreq_interface = { - .name = "s3c2410_cpufreq", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_cpufreq_add, -}; - -static int __init s3c2410_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410_cpufreq_interface); -} -arch_initcall(s3c2410_cpufreq_init); - -static int s3c2410a_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - /* alter the maximum freq settings for S3C2410A. If a board knows - * it only has a maximum of 200, then it should register its own - * limits. */ - - s3c2410_cpufreq_info.max.fclk = 266000000; - s3c2410_cpufreq_info.max.hclk = 133000000; - s3c2410_cpufreq_info.max.pclk = 66500000; - s3c2410_cpufreq_info.name = "s3c2410a"; - - return s3c2410_cpufreq_add(dev, sif); -} - -static struct subsys_interface s3c2410a_cpufreq_interface = { - .name = "s3c2410a_cpufreq", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410a_cpufreq_add, -}; - -static int __init s3c2410a_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410a_cpufreq_interface); -} -arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c deleted file mode 100644 index 8bf0f3a7747..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 CPU Frequency scalling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -#include "s3c2412.h" - -/* our clock resources. */ -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv, armdiv, dvs; - unsigned long hclk, fclk, armclk, armdiv_clk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - /* We can't run hclk above armclk as at the best we have to - * have armclk and hclk in dvs mode. */ - - if (hclk_max > armclk) - hclk_max = armclk; - - s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", - __func__, fclk, armclk, hclk_max); - s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", - __func__, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->freq.pclk); - - armdiv = fclk / armclk; - - if (armdiv < 1) - armdiv = 1; - if (armdiv > 2) - armdiv = 2; - - cfg->divs.arm_divisor = armdiv; - armdiv_clk = fclk / armdiv; - - hdiv = armdiv_clk / hclk_max; - if (hdiv < 1) - hdiv = 1; - - cfg->freq.hclk = hclk = armdiv_clk / hdiv; - - /* set dvs depending on whether we reached armclk or not. */ - cfg->divs.dvs = dvs = armclk < armdiv_clk; - - /* update the actual armclk we achieved. */ - cfg->freq.armclk = dvs ? hclk : armdiv_clk; - - s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", - __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); - - if (hdiv > 4) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - cfg->freq.pclk = hclk / pdiv; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv * armdiv; - cfg->divs.p_divisor = pdiv * armdiv; - - return 0; - -invalid: - return -EINVAL; -} - -static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv; - unsigned long olddiv; - - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); - - /* clear off current clock info */ - - clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; - clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; - clkdiv &= ~S3C2412_CLKDIVN_PDIVN; - - if (cfg->divs.arm_divisor == 2) - clkdiv |= S3C2412_CLKDIVN_ARMDIVN; - - clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2412_CLKDIVN_PDIVN; - - s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - - s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, - board->refresh, cfg->freq.hclk); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * by 10 each to ensure that we do not overflow 32 bit numbers. This - * should work for HCLK up to 133MHz and refresh period up to 30usec. - */ - - refresh = (board->refresh / 10); - refresh *= (cfg->freq.hclk / 100); - refresh /= (1 * 1000 * 1000); /* 10^6 */ - - s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); - __raw_writel(refresh, S3C2412_REFRESH); -} - -/* set the default cpu frequency information, based on an 200MHz part - * as we have no other way of detecting the speed rating in software. - */ - -static struct s3c_cpufreq_info s3c2412_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - .latency = 5000000, /* 5ms */ - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 16, - - .name = "s3c2412", - .set_refresh = s3c2412_cpufreq_setrefresh, - .set_divs = s3c2412_cpufreq_setdivs, - .calc_divs = s3c2412_cpufreq_calcdivs, - - .calc_iotiming = s3c2412_iotiming_calc, - .set_iotiming = s3c2412_iotiming_set, - .get_iotiming = s3c2412_iotiming_get, - - .resume_clocks = s3c2412_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), -}; - -static int s3c2412_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - unsigned long fclk_rate; - - hclk = clk_get(NULL, "hclk"); - if (IS_ERR(hclk)) { - printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); - return -ENOENT; - } - - fclk = clk_get(NULL, "fclk"); - if (IS_ERR(fclk)) { - printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); - goto err_fclk; - } - - fclk_rate = clk_get_rate(fclk); - if (fclk_rate > 200000000) { - printk(KERN_INFO - "%s: fclk %ld MHz, assuming 266MHz capable part\n", - __func__, fclk_rate / 1000000); - s3c2412_cpufreq_info.max.fclk = 266000000; - s3c2412_cpufreq_info.max.hclk = 133000000; - s3c2412_cpufreq_info.max.pclk = 66000000; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - printk(KERN_ERR "%s: cannot find arm clock\n", __func__); - goto err_armclk; - } - - xtal = clk_get(NULL, "xtal"); - if (IS_ERR(xtal)) { - printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); - goto err_xtal; - } - - return s3c_cpufreq_register(&s3c2412_cpufreq_info); - -err_xtal: - clk_put(armclk); -err_armclk: - clk_put(fclk); -err_fclk: - clk_put(hclk); - - return -ENOENT; -} - -static struct subsys_interface s3c2412_cpufreq_interface = { - .name = "s3c2412_cpufreq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_cpufreq_add, -}; - -static int s3c2412_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2412_cpufreq_interface); -} -arch_initcall(s3c2412_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c deleted file mode 100644 index 72b2cc8a5a8..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * S3C2440/S3C2442 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> -#include <plat/clock.h> - -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static inline int within_khz(unsigned long a, unsigned long b) -{ - long diff = a - b; - - return (diff >= -1000 && diff <= 1000); -} - -/** - * s3c2440_cpufreq_calcdivs - calculate divider settings - * @cfg: The cpu frequency settings. - * - * Calcualte the divider values for the given frequency settings - * specified in @cfg. The values are stored in @cfg for later use - * by the relevant set routine if the request settings can be reached. - */ -int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv; - unsigned long hclk, fclk, armclk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", - __func__, fclk, armclk, hclk_max); - - if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); - armclk = fclk; - } - - /* if we are in DVS, we need HCLK to be <= ARMCLK */ - if (armclk < fclk && armclk < hclk_max) - hclk_max = armclk; - - for (hdiv = 1; hdiv < 9; hdiv++) { - if (hdiv == 5 || hdiv == 7) - hdiv++; - - hclk = (fclk / hdiv); - if (hclk <= hclk_max || within_khz(hclk, hclk_max)) - break; - } - - s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); - - if (hdiv > 8) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* calculate a valid armclk */ - - if (armclk < hclk) - armclk = hclk; - - /* if we're running armclk lower than fclk, this really means - * that the system should go into dvs mode, which means that - * armclk is connected to hclk. */ - if (armclk < fclk) { - cfg->divs.dvs = 1; - armclk = hclk; - } else - cfg->divs.dvs = 0; - - cfg->freq.armclk = armclk; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv; - cfg->divs.p_divisor = pdiv; - - return 0; - - invalid: - return -EINVAL; -} - -#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ - S3C2440_CAMDIVN_HCLK4_HALF) - -/** - * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings - * @cfg: The cpu frequency settings. - * - * Set the divisors from the settings in @cfg, which where generated - * during the calculation phase by s3c2440_cpufreq_calcdivs(). - */ -static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv, camdiv; - - s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, - cfg->divs.h_divisor, cfg->divs.p_divisor); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); - camdiv &= ~CAMDIVN_HCLK_HALF; - - switch (cfg->divs.h_divisor) { - case 1: - clkdiv |= S3C2440_CLKDIVN_HDIVN_1; - break; - - case 2: - clkdiv |= S3C2440_CLKDIVN_HDIVN_2; - break; - - case 6: - camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; - case 3: - clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; - break; - - case 8: - camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; - case 4: - clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; - break; - - default: - BUG(); /* we don't expect to get here. */ - } - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2440_CLKDIVN_PDIVN; - - /* todo - set pclk. */ - - /* Write the divisors first with hclk intentionally halved so that - * when we write clkdiv we will under-frequency instead of over. We - * then make a short delay and remove the hclk halving if necessary. - */ - - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static int run_freq_for(unsigned long max_hclk, unsigned long fclk, - int *divs, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - unsigned long freq; - int index = 0; - int div; - - for (div = *divs; div > 0; div = *divs++) { - freq = fclk / div; - - if (freq > max_hclk && div != 1) - continue; - - freq /= 1000; /* table is in kHz */ - index = s3c_cpufreq_addfreq(table, index, table_size, freq); - if (index < 0) - break; - } - - return index; -} - -static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; - -static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - int ret; - - WARN_ON(cfg->info == NULL); - WARN_ON(cfg->board == NULL); - - ret = run_freq_for(cfg->info->max.hclk, - cfg->info->max.fclk, - hclk_divs, - table, table_size); - - s3c_freq_dbg("%s: returning %d\n", __func__, ret); - - return ret; -} - -struct s3c_cpufreq_info s3c2440_cpufreq_info = { - .max = { - .fclk = 400000000, - .hclk = 133333333, - .pclk = 66666666, - }, - - .locktime_m = 300, - .locktime_u = 300, - .locktime_bits = 16, - - .name = "s3c244x", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .set_fvco = s3c2410_set_fvco, - - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2440_cpufreq_setdivs, - .calc_divs = s3c2440_cpufreq_calcdivs, - .calc_freqtable = s3c2440_cpufreq_calctable, - - .resume_clocks = s3c244x_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2440_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - armclk = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); - return -ENOENT; - } - - return s3c_cpufreq_register(&s3c2440_cpufreq_info); -} - -static struct subsys_interface s3c2440_cpufreq_interface = { - .name = "s3c2440_cpufreq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2440_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2440_cpufreq_interface); -} - -/* arch_initcall adds the clocks we need, so use subsys_initcall. */ -subsys_initcall(s3c2440_cpufreq_init); - -static struct subsys_interface s3c2442_cpufreq_interface = { - .name = "s3c2442_cpufreq", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2442_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2442_cpufreq_interface); -} -subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c deleted file mode 100644 index 3c0e78ede0d..00000000000 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ /dev/null @@ -1,711 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/sysfs.h> -#include <linux/slab.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/cpu-freq-core.h> - -#include <mach/regs-clock.h> - -/* note, cpufreq support deals in kHz, no Hz */ - -static struct cpufreq_driver s3c24xx_driver; -static struct s3c_cpufreq_config cpu_cur; -static struct s3c_iotimings s3c24xx_iotiming; -static struct cpufreq_frequency_table *pll_reg; -static unsigned int last_target = ~0; -static unsigned int ftab_size; -static struct cpufreq_frequency_table *ftab; - -static struct clk *_clk_mpll; -static struct clk *_clk_xtal; -static struct clk *clk_fclk; -static struct clk *clk_hclk; -static struct clk *clk_pclk; -static struct clk *clk_arm; - -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS -struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) -{ - return &cpu_cur; -} - -struct s3c_iotimings *s3c_cpufreq_getiotimings(void) -{ - return &s3c24xx_iotiming; -} -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */ - -static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) -{ - unsigned long fclk, pclk, hclk, armclk; - - cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); - cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); - cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); - cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); - cfg->pll.frequency = fclk; - - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); - - cfg->divs.h_divisor = fclk / hclk; - cfg->divs.p_divisor = fclk / pclk; -} - -static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) -{ - unsigned long pll = cfg->pll.frequency; - - cfg->freq.fclk = pll; - cfg->freq.hclk = pll / cfg->divs.h_divisor; - cfg->freq.pclk = pll / cfg->divs.p_divisor; - - /* convert hclk into 10ths of nanoseconds for io calcs */ - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); -} - -static inline int closer(unsigned int target, unsigned int n, unsigned int c) -{ - int diff_cur = abs(target - c); - int diff_new = abs(target - n); - - return (diff_new < diff_cur); -} - -static void s3c_cpufreq_show(const char *pfx, - struct s3c_cpufreq_config *cfg) -{ - s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", - pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->divs.h_divisor, - cfg->freq.pclk, cfg->divs.p_divisor); -} - -/* functions to wrapper the driver info calls to do the cpu specific work */ - -static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->set_iotiming) - (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); -} - -static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->calc_iotiming) - return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); - - return 0; -} - -static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_refresh)(cfg); -} - -static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_divs)(cfg); -} - -static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - return (cfg->info->calc_divs)(cfg); -} - -static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_fvco)(cfg); -} - -static inline void s3c_cpufreq_resume_clocks(void) -{ - cpu_cur.info->resume_clocks(); -} - -static inline void s3c_cpufreq_updateclk(struct clk *clk, - unsigned int freq) -{ - clk_set_rate(clk, freq); -} - -static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, - unsigned int target_freq, - struct cpufreq_frequency_table *pll) -{ - struct s3c_cpufreq_freqs freqs; - struct s3c_cpufreq_config cpu_new; - unsigned long flags; - - cpu_new = cpu_cur; /* copy new from current */ - - s3c_cpufreq_show("cur", &cpu_cur); - - /* TODO - check for DMA currently outstanding */ - - cpu_new.pll = pll ? *pll : cpu_cur.pll; - - if (pll) - freqs.pll_changing = 1; - - /* update our frequencies */ - - cpu_new.freq.armclk = target_freq; - cpu_new.freq.fclk = cpu_new.pll.frequency; - - if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - printk(KERN_ERR "no divisors for %d\n", target_freq); - goto err_notpossible; - } - - s3c_freq_dbg("%s: got divs\n", __func__); - - s3c_cpufreq_calc(&cpu_new); - - s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); - - if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { - if (s3c_cpufreq_calcio(&cpu_new) < 0) { - printk(KERN_ERR "%s: no IO timings\n", __func__); - goto err_notpossible; - } - } - - s3c_cpufreq_show("new", &cpu_new); - - /* setup our cpufreq parameters */ - - freqs.old = cpu_cur.freq; - freqs.new = cpu_new.freq; - - freqs.freqs.old = cpu_cur.freq.armclk / 1000; - freqs.freqs.new = cpu_new.freq.armclk / 1000; - - /* update f/h/p clock settings before we issue the change - * notification, so that drivers do not need to do anything - * special if they want to recalculate on CPUFREQ_PRECHANGE. */ - - s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); - s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); - s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); - s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); - - /* start the frequency change */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); - - /* If hclk is staying the same, then we do not need to - * re-write the IO or the refresh timings whilst we are changing - * speed. */ - - local_irq_save(flags); - - /* is our memory clock slowing down? */ - if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { - /* not changing PLL, just set the divisors */ - - s3c_cpufreq_setdivs(&cpu_new); - } else { - if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { - /* slow the cpu down, then set divisors */ - - s3c_cpufreq_setfvco(&cpu_new); - s3c_cpufreq_setdivs(&cpu_new); - } else { - /* set the divisors, then speed up */ - - s3c_cpufreq_setdivs(&cpu_new); - s3c_cpufreq_setfvco(&cpu_new); - } - } - - /* did our memory clock speed up */ - if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - /* update our current settings */ - cpu_cur = cpu_new; - - local_irq_restore(flags); - - /* notify everyone we've done this */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); - - s3c_freq_dbg("%s: finished\n", __func__); - return 0; - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -/* s3c_cpufreq_target - * - * called by the cpufreq core to adjust the frequency that the CPU - * is currently running at. - */ - -static int s3c_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pll; - unsigned int index; - - /* avoid repeated calls which cause a needless amout of duplicated - * logging output (and CPU time as the calculation process is - * done) */ - if (target_freq == last_target) - return 0; - - last_target = target_freq; - - s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", - __func__, policy, target_freq, relation); - - if (ftab) { - if (cpufreq_frequency_table_target(policy, ftab, - target_freq, relation, - &index)) { - s3c_freq_dbg("%s: table failed\n", __func__); - return -EINVAL; - } - - s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, - target_freq, index, ftab[index].frequency); - target_freq = ftab[index].frequency; - } - - target_freq *= 1000; /* convert target to Hz */ - - /* find the settings for our new frequency */ - - if (!pll_reg || cpu_cur.lock_pll) { - /* either we've not got any PLL values, or we've locked - * to the current one. */ - pll = NULL; - } else { - struct cpufreq_policy tmp_policy; - int ret; - - /* we keep the cpu pll table in Hz, to ensure we get an - * accurate value for the PLL output. */ - - tmp_policy.min = policy->min * 1000; - tmp_policy.max = policy->max * 1000; - tmp_policy.cpu = policy->cpu; - - /* cpufreq_frequency_table_target uses a pointer to 'index' - * which is the number of the table entry, not the value of - * the table entry's index field. */ - - ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, - target_freq, relation, - &index); - - if (ret < 0) { - printk(KERN_ERR "%s: no PLL available\n", __func__); - goto err_notpossible; - } - - pll = pll_reg + index; - - s3c_freq_dbg("%s: target %u => %u\n", - __func__, target_freq, pll->frequency); - - target_freq = pll->frequency; - } - - return s3c_cpufreq_settarget(policy, target_freq, pll); - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -static unsigned int s3c_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(clk_arm) / 1000; -} - -struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) -{ - struct clk *clk; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) - printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); - - return clk; -} - -static int s3c_cpufreq_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = s3c_cpufreq_get(0); - policy->min = policy->cpuinfo.min_freq = 0; - policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* feed the latency information from the cpu driver */ - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - - if (ftab) - cpufreq_frequency_table_cpuinfo(policy, ftab); - - return 0; -} - -static __init int s3c_cpufreq_initclks(void) -{ - _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); - _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); - clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || - IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - printk(KERN_ERR "%s: could not get clock(s)\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); - - return 0; -} - -static int s3c_cpufreq_verify(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return 0; -} - -#ifdef CONFIG_PM -static struct cpufreq_frequency_table suspend_pll; -static unsigned int suspend_freq; - -static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) -{ - suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); - suspend_freq = s3c_cpufreq_get(0) * 1000; - - return 0; -} - -static int s3c_cpufreq_resume(struct cpufreq_policy *policy) -{ - int ret; - - s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); - - last_target = ~0; /* invalidate last_target setting */ - - /* first, find out what speed we resumed at. */ - s3c_cpufreq_resume_clocks(); - - /* whilst we will be called later on, we try and re-set the - * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediately having to re-set - * a number of settings once these devices have restarted. - * - * as a note, it is expected devices are not used until they - * have been un-suspended and at that time they should have - * used the updated clock settings. - */ - - ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); - if (ret) { - printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); - return ret; - } - - return 0; -} -#else -#define s3c_cpufreq_resume NULL -#define s3c_cpufreq_suspend NULL -#endif - -static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_STICKY, - .verify = s3c_cpufreq_verify, - .target = s3c_cpufreq_target, - .get = s3c_cpufreq_get, - .init = s3c_cpufreq_init, - .suspend = s3c_cpufreq_suspend, - .resume = s3c_cpufreq_resume, - .name = "s3c24xx", -}; - - -int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) -{ - if (!info || !info->name) { - printk(KERN_ERR "%s: failed to pass valid information\n", - __func__); - return -EINVAL; - } - - printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); - - /* check our driver info has valid data */ - - BUG_ON(info->set_refresh == NULL); - BUG_ON(info->set_divs == NULL); - BUG_ON(info->calc_divs == NULL); - - /* info->set_fvco is optional, depending on whether there - * is a need to set the clock code. */ - - cpu_cur.info = info; - - /* Note, driver registering should probably update locktime */ - - return 0; -} - -int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - struct s3c_cpufreq_board *ours; - - if (!board) { - printk(KERN_INFO "%s: no board data\n", __func__); - return -EINVAL; - } - - /* Copy the board information so that each board can make this - * initdata. */ - - ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL); - if (ours == NULL) { - printk(KERN_ERR "%s: no memory\n", __func__); - return -ENOMEM; - } - - *ours = *board; - cpu_cur.board = ours; - - return 0; -} - -int __init s3c_cpufreq_auto_io(void) -{ - int ret; - - if (!cpu_cur.info->get_iotiming) { - printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: working out IO settings\n", __func__); - - ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); - if (ret) - printk(KERN_ERR "%s: failed to get timings\n", __func__); - - return ret; -} - -/* if one or is zero, then return the other, otherwise return the min */ -#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) - -/** - * s3c_cpufreq_freq_min - find the minimum settings for the given freq. - * @dst: The destination structure - * @a: One argument. - * @b: The other argument. - * - * Create a minimum of each frequency entry in the 'struct s3c_freq', - * unless the entry is zero when it is ignored and the non-zero argument - * used. - */ -static void s3c_cpufreq_freq_min(struct s3c_freq *dst, - struct s3c_freq *a, struct s3c_freq *b) -{ - dst->fclk = do_min(a->fclk, b->fclk); - dst->hclk = do_min(a->hclk, b->hclk); - dst->pclk = do_min(a->pclk, b->pclk); - dst->armclk = do_min(a->armclk, b->armclk); -} - -static inline u32 calc_locktime(u32 freq, u32 time_us) -{ - u32 result; - - result = freq * time_us; - result = DIV_ROUND_UP(result, 1000 * 1000); - - return result; -} - -static void s3c_cpufreq_update_loctkime(void) -{ - unsigned int bits = cpu_cur.info->locktime_bits; - u32 rate = (u32)clk_get_rate(_clk_xtal); - u32 val; - - if (bits == 0) { - WARN_ON(1); - return; - } - - val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; - val |= calc_locktime(rate, cpu_cur.info->locktime_m); - - printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); -} - -static int s3c_cpufreq_build_freq(void) -{ - int size, ret; - - if (!cpu_cur.info->calc_freqtable) - return -EINVAL; - - kfree(ftab); - ftab = NULL; - - size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); - size++; - - ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL); - if (!ftab) { - printk(KERN_ERR "%s: no memory for tables\n", __func__); - return -ENOMEM; - } - - ftab_size = size; - - ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); - s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); - - return 0; -} - -static int __init s3c_cpufreq_initcall(void) -{ - int ret = 0; - - if (cpu_cur.info && cpu_cur.board) { - ret = s3c_cpufreq_initclks(); - if (ret) - goto out; - - /* get current settings */ - s3c_cpufreq_getcur(&cpu_cur); - s3c_cpufreq_show("cur", &cpu_cur); - - if (cpu_cur.board->auto_io) { - ret = s3c_cpufreq_auto_io(); - if (ret) { - printk(KERN_ERR "%s: failed to get io timing\n", - __func__); - goto out; - } - } - - if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - printk(KERN_ERR "%s: no IO support registered\n", - __func__); - ret = -EINVAL; - goto out; - } - - if (!cpu_cur.info->need_pll) - cpu_cur.lock_pll = 1; - - s3c_cpufreq_update_loctkime(); - - s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, - &cpu_cur.info->max); - - if (cpu_cur.info->calc_freqtable) - s3c_cpufreq_build_freq(); - - ret = cpufreq_register_driver(&s3c24xx_driver); - } - - out: - return ret; -} - -late_initcall(s3c_cpufreq_initcall); - -/** - * s3c_plltab_register - register CPU PLL table. - * @plls: The list of PLL entries. - * @plls_no: The size of the PLL entries @plls. - * - * Register the given set of PLLs with the system. - */ -int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no) -{ - struct cpufreq_frequency_table *vals; - unsigned int size; - - size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1); - - vals = kmalloc(size, GFP_KERNEL); - if (vals) { - memcpy(vals, plls, size); - pll_reg = vals; - - /* write a terminating entry, we don't store it in the - * table that is stored in the kernel */ - vals += plls_no; - vals->frequency = CPUFREQ_TABLE_END; - - printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); - } else - printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); - - return vals ? 0 : -ENOMEM; -} diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h index 548ced42cbb..548ced42cbb 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index 663436d9db0..bd064c05c47 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -31,7 +31,7 @@ #include <plat/cpu-freq-core.h> #include <plat/clock.h> -#include "s3c2412.h" +#include <mach/s3c2412.h> #define print_ns(x) ((x) / 10), ((x) % 10) diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c new file mode 100644 index 00000000000..f50454a34f7 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -0,0 +1,91 @@ +/* + * Samsung's S3C2416 flattened device tree enabled machine + * + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on mach-exynos/mach-exynos4-dt.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the S3C2416 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, + "s3c2440-uart.0", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, + "s3c2440-uart.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, + "s3c2440-uart.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, + "s3c2440-uart.3", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, + "s3c-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, + "s3c-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, + "s3c2440-i2c.0", NULL), + {}, +}; + +static void __init s3c2416_dt_map_io(void) +{ + s3c24xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); +} + +static void __init s3c2416_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + s3c2416_auxdata_lookup, NULL); + + s3c_pm_init(); +} + +static char const *s3c2416_dt_compat[] __initdata = { + "samsung,s3c2416", + "samsung,s3c2450", + NULL +}; + +DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") + /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ + .dt_compat = s3c2416_dt_compat, + .map_io = s3c2416_dt_map_io, + .init_irq = irqchip_init, + .init_machine = s3c2416_dt_machine_init, + .init_time = clocksource_of_init, + .restart = s3c2416_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1a517e2fe44..06da4d36bc7 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -37,6 +37,7 @@ config ARCH_R8A7740 config ARCH_R8A7778 bool "R-Car M1 (R8A77780)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V7 select SH_CLK_CPG select ARM_GIC diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 45f78cadec1..297bf5eec5a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1026,10 +1026,8 @@ out: /* TouchScreen */ #ifdef CONFIG_AP4EVB_QHD -# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 # define GPIO_TSC_PORT 123 #else /* WVGA */ -# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 # define GPIO_TSC_PORT 40 #endif @@ -1037,22 +1035,12 @@ out: #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ static int ts_get_pendown_state(void) { - int val; - - gpio_free(GPIO_TSC_IRQ); - - gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); - - val = gpio_get_value(GPIO_TSC_PORT); - - gpio_request(GPIO_TSC_IRQ, NULL); - - return !val; + return !gpio_get_value(GPIO_TSC_PORT); } static int ts_init(void) { - gpio_request(GPIO_TSC_IRQ, NULL); + gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); return 0; } @@ -1086,11 +1074,42 @@ static struct i2c_board_info i2c1_devices[] = { static const struct pinctrl_map ap4evb_pinctrl_map[] = { + /* CEU */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_clk_0", "ceu"), + /* FSIA (AK4643) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_out", "fsia"), + /* FSIB (HDMI) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", + "fsib_mclk_in", "fsib"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372", + "hdmi", "hdmi"), + /* KEYSC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372", + "keysc_in04_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372", + "keysc_out5", "keysc"), +#ifndef CONFIG_AP4EVB_QHD + /* LCDC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_data18", "lcd"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_sync", "lcd"), +#endif /* MMCIF */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", "mmc0_data8_0", "mmc0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", "mmc0_ctrl_0", "mmc0"), + /* SCIFA0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372", + "scifa0_data", "scifa0"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_data4", "sdhi0"), @@ -1105,6 +1124,26 @@ static const struct pinctrl_map ap4evb_pinctrl_map[] = { "sdhi1_data4", "sdhi1"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", "sdhi1_ctrl", "sdhi1"), + /* SMSC911X */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "bsc_cs5a", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "intc_irq6_0", "intc"), + /* TSC2007 */ +#ifdef CONFIG_AP4EVB_QHD + PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372", + "intc_irq28_0", "intc"), +#else /* WVGA */ + PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372", + "intc_irq7_0", "intc"), +#endif + /* USBHS1 */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372", + "usb1_vbus", "usb1"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372", + "usb1_otg_id_0", "usb1"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372", + "usb1_otg_ctrl_0", "usb1"), }; #define GPIO_PORT9CR IOMEM(0xE6051009) @@ -1137,36 +1176,16 @@ static void __init ap4evb_init(void) ARRAY_SIZE(ap4evb_pinctrl_map)); sh7372_pinmux_init(); - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - - /* enable SMSC911X */ - gpio_request(GPIO_FN_CS5A, NULL); - gpio_request(GPIO_FN_IRQ6_39, NULL); - /* enable Debug switch (S6) */ gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL); gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL); gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL); gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL); - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); - /* setup USB phy */ __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* FSI2 port A (ak4643) */ gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(9, NULL); @@ -1177,8 +1196,7 @@ static void __init ap4evb_init(void) /* card detect pin for MMC slot (CN7) */ gpio_request_one(41, GPIOF_IN, NULL); - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); + /* FSI2 port B (HDMI) */ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ /* set SPU2 clock to 119.6 MHz */ @@ -1208,18 +1226,6 @@ static void __init ap4evb_init(void) * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. */ - /* enable KEYSC */ - gpio_request(GPIO_FN_KEYOUT0, NULL); - gpio_request(GPIO_FN_KEYOUT1, NULL); - gpio_request(GPIO_FN_KEYOUT2, NULL); - gpio_request(GPIO_FN_KEYOUT3, NULL); - gpio_request(GPIO_FN_KEYOUT4, NULL); - gpio_request(GPIO_FN_KEYIN0_136, NULL); - gpio_request(GPIO_FN_KEYIN1_135, NULL); - gpio_request(GPIO_FN_KEYIN2_134, NULL); - gpio_request(GPIO_FN_KEYIN3_133, NULL); - gpio_request(GPIO_FN_KEYIN4, NULL); - /* enable TouchScreen */ irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); @@ -1241,28 +1247,6 @@ static void __init ap4evb_init(void) * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. */ - - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ @@ -1288,8 +1272,6 @@ static void __init ap4evb_init(void) */ /* MIPI-CSI stuff */ - gpio_request(GPIO_FN_VIO_CKO, NULL); - clk = clk_get(NULL, "vck1_clk"); if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 13000000)); @@ -1299,10 +1281,6 @@ static void __init ap4evb_init(void) sh7372_add_standard_devices(); - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ #define SRCR4 IOMEM(0xe61580bc) srcr4 = __raw_readl(SRCR4); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index b85b2882dbd..44a621505ee 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = { static struct fixed_voltage_config vcc_sdhi0_info = { .supply_name = "SDHI0 Vcc", .microvolts = 3300000, - .gpio = GPIO_PORT75, + .gpio = 75, .enable_high = 1, .init_data = &vcc_sdhi0_init_data, }; @@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = { }; static struct gpio vccq_sdhi0_gpios[] = { - {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, + {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, }; static struct gpio_regulator_state vccq_sdhi0_states[] = { @@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = { static struct gpio_regulator_config vccq_sdhi0_info = { .supply_name = "vqmmc", - .enable_gpio = GPIO_PORT74, + .enable_gpio = 74, .enable_high = 1, .enabled_at_boot = 0, @@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = { static struct fixed_voltage_config vcc_sdhi1_info = { .supply_name = "SDHI1 Vcc", .microvolts = 3300000, - .gpio = GPIO_PORT16, + .gpio = 16, .enable_high = 1, .init_data = &vcc_sdhi1_init_data, }; @@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, - .cd_gpio = GPIO_PORT167, + .cd_gpio = 167, }; static struct resource sdhi0_resources[] = { @@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, /* Port72 cannot generate IRQs, will be used in polling mode. */ - .cd_gpio = GPIO_PORT72, + .cd_gpio = 72, }; static struct resource sdhi1_resources[] = { @@ -1046,6 +1046,35 @@ static struct platform_device *eva_devices[] __initdata = { }; static const struct pinctrl_map eva_pinctrl_map[] = { + /* CEU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_data_0_7", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_clk_0", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_sync", "ceu0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", + "ceu0_field", "ceu0"), + /* FSIA */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_mclk_out", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_in_1", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", + "fsia_data_out_0", "fsia"), + /* FSIB */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", + "fsib_mclk_in", "fsib"), + /* GETHER */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + "gether_mii", "gether"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + "gether_int", "gether"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", + "hdmi", "hdmi"), /* LCD0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", "lcd0_data24_0", "lcd0"), @@ -1058,6 +1087,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { "mmc0_data8_1", "mmc0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", "mmc0_ctrl_1", "mmc0"), + /* SCIFA1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", + "scifa1_data", "scifa1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", "sdhi0_data4", "sdhi0"), @@ -1065,6 +1097,12 @@ static const struct pinctrl_map eva_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", "sdhi0_wp", "sdhi0"), + /* ST1232 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", + "intc_irq10", "intc"), + /* USBHS */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", + "intc_irq7_1", "intc"), }; static void __init eva_clock_init(void) @@ -1119,40 +1157,14 @@ static void __init eva_init(void) r8a7740_pinmux_init(); r8a7740_meram_workaround(); - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - /* LCDC0 */ - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ - gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ + gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ - gpio_request(GPIO_FN_ET_CRS, NULL); - gpio_request(GPIO_FN_ET_MDC, NULL); - gpio_request(GPIO_FN_ET_MDIO, NULL); - gpio_request(GPIO_FN_ET_TX_ER, NULL); - gpio_request(GPIO_FN_ET_RX_ER, NULL); - gpio_request(GPIO_FN_ET_ERXD0, NULL); - gpio_request(GPIO_FN_ET_ERXD1, NULL); - gpio_request(GPIO_FN_ET_ERXD2, NULL); - gpio_request(GPIO_FN_ET_ERXD3, NULL); - gpio_request(GPIO_FN_ET_TX_CLK, NULL); - gpio_request(GPIO_FN_ET_TX_EN, NULL); - gpio_request(GPIO_FN_ET_ETXD0, NULL); - gpio_request(GPIO_FN_ET_ETXD1, NULL); - gpio_request(GPIO_FN_ET_ETXD2, NULL); - gpio_request(GPIO_FN_ET_ETXD3, NULL); - gpio_request(GPIO_FN_ET_PHY_INT, NULL); - gpio_request(GPIO_FN_ET_COL, NULL); - gpio_request(GPIO_FN_ET_RX_DV, NULL); - gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ @@ -1163,34 +1175,17 @@ static void __init eva_init(void) } else { /* USB Func */ /* - * A1 chip has 2 IRQ7 pin and it was controled by MSEL register. - * OTOH, usbhs interrupt needs its value (HI/LOW) to decide - * USB connection/disconnection (usbhsf_get_vbus()). - * This means we needs to select GPIO_FN_IRQ7_PORT209 first, - * and select GPIO 209 here + * The USBHS interrupt handlers needs to read the IRQ pin value + * (HI/LOW) to diffentiate USB connection and disconnection + * events (usbhsf_get_vbus()). We thus need to select both the + * intc_irq7_1 pin group and GPIO 209 here. */ - gpio_request(GPIO_FN_IRQ7_PORT209, NULL); gpio_request_one(209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; } - /* CEU0 */ - gpio_request(GPIO_FN_VIO0_D7, NULL); - gpio_request(GPIO_FN_VIO0_D6, NULL); - gpio_request(GPIO_FN_VIO0_D5, NULL); - gpio_request(GPIO_FN_VIO0_D4, NULL); - gpio_request(GPIO_FN_VIO0_D3, NULL); - gpio_request(GPIO_FN_VIO0_D2, NULL); - gpio_request(GPIO_FN_VIO0_D1, NULL); - gpio_request(GPIO_FN_VIO0_D0, NULL); - gpio_request(GPIO_FN_VIO0_CLK, NULL); - gpio_request(GPIO_FN_VIO0_HD, NULL); - gpio_request(GPIO_FN_VIO0_VD, NULL); - gpio_request(GPIO_FN_VIO0_FIELD, NULL); - gpio_request(GPIO_FN_VIO_CKO, NULL); - /* CON1/CON15 Camera */ gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ @@ -1198,24 +1193,11 @@ static void __init eva_init(void) gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAOMC, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); - gpio_request(7, NULL); gpio_request(8, NULL); gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ - /* FSI-HDMI */ - gpio_request(GPIO_FN_FSIBCK, NULL); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - /* * CAUTION * diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 38e5e50fb31..dac4365c515 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> #include <mach/common.h> @@ -37,6 +38,14 @@ static struct resource smsc911x_resources[] = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +static const struct pinctrl_map bockw_pinctrl_map[] = { + /* SCIF0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", + "scif0_data_a", "scif0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", + "scif0_ctrl", "scif0"), +}; + #define IRQ0MR 0x30 static void __init bockw_init(void) { @@ -46,6 +55,10 @@ static void __init bockw_init(void) r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + pinctrl_register_mappings(bockw_pinctrl_map, + ARRAY_SIZE(bockw_pinctrl_map)); + r8a7778_pinmux_init(); + fpga = ioremap_nocache(0x18200000, SZ_1M); if (fpga) { /* diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 70d992c540a..b373e9ced57 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -331,12 +331,6 @@ static struct platform_device smsc_device = { }; /* - * core board devices - */ -static struct platform_device *bonito_core_devices[] __initdata = { -}; - -/* * base board devices */ static struct platform_device *bonito_base_devices[] __initdata = { @@ -375,12 +369,37 @@ static void __init bonito_map_io(void) #define VCCQ1CR IOMEM(0xE6058140) #define VCCQ1LCDCR IOMEM(0xE6058186) +/* + * HACK: The FPGA mappings should be associated with the FPGA device, but we + * don't have one at the moment. Associate them with the PFC device to make + * sure they will be applied. + */ +static const struct pinctrl_map fpga_pinctrl_map[] = { + /* FPGA */ + PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740", + "bsc_cs5a_0", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740", + "bsc_cs5b", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740", + "bsc_cs6a", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740", + "intc_irq10", "intc"), +}; + +static const struct pinctrl_map scifa5_pinctrl_map[] = { + /* SCIFA5 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.5", "pfc-r8a7740", + "scifa5_data_2", "scifa5"), +}; + static void __init bonito_init(void) { u16 val; regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + pinctrl_register_mappings(fpga_pinctrl_map, + ARRAY_SIZE(fpga_pinctrl_map)); r8a7740_pinmux_init(); bonito_fpga_init(); @@ -397,9 +416,6 @@ static void __init bonito_init(void) r8a7740_add_standard_devices(); - platform_add_devices(bonito_core_devices, - ARRAY_SIZE(bonito_core_devices)); - /* * base board settings */ @@ -409,14 +425,6 @@ static void __init bonito_init(void) u16 bsw3; u16 bsw4; - /* - * FPGA - */ - gpio_request(GPIO_FN_CS5B, NULL); - gpio_request(GPIO_FN_CS6A, NULL); - gpio_request(GPIO_FN_CS5A_PORT105, NULL); - gpio_request(GPIO_FN_IRQ10, NULL); - val = bonito_fpga_read(BVERR); pr_info("bonito version: cpu %02x, base %02x\n", ((val >> 8) & 0xFF), @@ -432,8 +440,8 @@ static void __init bonito_init(void) if (BIT_OFF(bsw2, 1) && /* S38.3 = ON */ BIT_OFF(bsw3, 9) && /* S39.6 = ON */ BIT_OFF(bsw4, 4)) { /* S43.1 = ON */ - gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL); - gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL); + pinctrl_register_mappings(scifa5_pinctrl_map, + ARRAY_SIZE(scifa5_pinctrl_map)); } /* @@ -443,7 +451,6 @@ static void __init bonito_init(void) BIT_ON(bsw2, 2)) { /* S38.2 = OFF */ pinctrl_register_mappings(lcdc0_pinctrl_map, ARRAY_SIZE(lcdc0_pinctrl_map)); - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index aefa50d385b..44055fe8a45 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -79,7 +79,6 @@ static void __init kzm_init(void) sh73a0_pinmux_init(); /* enable SD */ - gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index e6b775a10aa..1fdf05cb6da 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -663,13 +663,13 @@ static unsigned long pin_pullup_conf[] = { static const struct pinctrl_map kzm_pinctrl_map[] = { /* FSIA (AK4648) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_mclk_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_sclk_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_data_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0", "fsia_data_out", "fsia"), /* I2C3 */ PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", @@ -788,9 +788,6 @@ static void __init kzm_init(void) /* Touchscreen */ gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ - /* enable SD */ - gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f587187a860..6114edd0a97 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -21,15 +21,30 @@ #include <linux/interrupt.h> #include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <mach/common.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +static const struct pinctrl_map lager_pinctrl_map[] = { + /* SCIF0 (CN19: DEBUG SERIAL0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", + "scif0_data", "scif0"), + /* SCIF1 (CN20: DEBUG SERIAL1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790", + "scif1_data", "scif1"), +}; + static void __init lager_add_standard_devices(void) { r8a7790_clock_init(); + + pinctrl_register_mappings(lager_pinctrl_map, + ARRAY_SIZE(lager_pinctrl_map)); + r8a7790_pinmux_init(); + r8a7790_add_standard_devices(); } diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index fa3407da682..85f51a849a5 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1309,6 +1309,49 @@ static struct i2c_board_info i2c1_devices[] = { }; static const struct pinctrl_map mackerel_pinctrl_map[] = { + /* ADXL34X */ + PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372", + "intc_irq21", "intc"), + /* CEU */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_data_0_7", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_clk_0", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_sync", "ceu"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", + "ceu_field", "ceu"), + /* FLCTL */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_data", "flctl"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_ce0", "flctl"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", + "flctl_ctrl", "flctl"), + /* FSIA (AK4643) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_out", "fsia"), + /* FSIB (HDMI) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", + "fsib_mclk_in", "fsib"), + /* HDMI */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372", + "hdmi", "hdmi"), + /* LCDC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_data24", "lcd"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", + "lcd_sync", "lcd"), + /* SCIFA0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372", + "scifa0_data", "scifa0"), + /* SCIFA2 (GT-720F GPS module) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372", + "scifa2_data", "scifa2"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_data4", "sdhi0"), @@ -1316,6 +1359,8 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_wp", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "intc_irq26_1", "intc"), /* SDHI1 */ #if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", @@ -1334,6 +1379,25 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "sdhi2_data4", "sdhi2"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", "sdhi2_ctrl", "sdhi2"), + /* SMSC911X */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "bsc_cs5a", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", + "intc_irq6_0", "intc"), + /* ST1232 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372", + "intc_irq7_0", "intc"), + /* TCA6416 */ + PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372", + "intc_irq9_0", "intc"), + /* USBHS0 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372", + "usb0_vbus", "usb0"), + /* USBHS1 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", + "usb1_vbus", "usb1"), + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", + "usb1_otg_id_0", "usb1"), }; #define GPIO_PORT9CR IOMEM(0xE6051009) @@ -1377,61 +1441,18 @@ static void __init mackerel_init(void) ARRAY_SIZE(mackerel_pinctrl_map)); sh7372_pinmux_init(); - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - - /* enable SMSC911X */ - gpio_request(GPIO_FN_CS5A, NULL); - gpio_request(GPIO_FN_IRQ6_39, NULL); - - /* LCDC */ - gpio_request(GPIO_FN_LCDD23, NULL); - gpio_request(GPIO_FN_LCDD22, NULL); - gpio_request(GPIO_FN_LCDD21, NULL); - gpio_request(GPIO_FN_LCDD20, NULL); - gpio_request(GPIO_FN_LCDD19, NULL); - gpio_request(GPIO_FN_LCDD18, NULL); - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - /* backlight, off by default */ gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL); gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ - gpio_request(GPIO_FN_VBUS0_0, NULL); gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */ /* USBHS1 */ - gpio_request(GPIO_FN_VBUS0_1, NULL); gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */ - gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* FSI2 port A (ak4643) */ gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(9, NULL); @@ -1441,8 +1462,7 @@ static void __init mackerel_init(void) intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); + /* FSI2 port B (HDMI) */ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ /* set SPU2 clock to 119.6 MHz */ @@ -1452,68 +1472,15 @@ static void __init mackerel_init(void) clk_put(clk); } - /* enable Keypad */ - gpio_request(GPIO_FN_IRQ9_42, NULL); + /* Keypad */ irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); - /* enable Touchscreen */ - gpio_request(GPIO_FN_IRQ7_40, NULL); + /* Touchscreen */ irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); - /* enable Accelerometer */ - gpio_request(GPIO_FN_IRQ21, NULL); + /* Accelerometer */ irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - /* SDHI0 PORT172 card-detect IRQ26 */ - gpio_request(GPIO_FN_IRQ26_172, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_D0_NAF0, NULL); - gpio_request(GPIO_FN_D1_NAF1, NULL); - gpio_request(GPIO_FN_D2_NAF2, NULL); - gpio_request(GPIO_FN_D3_NAF3, NULL); - gpio_request(GPIO_FN_D4_NAF4, NULL); - gpio_request(GPIO_FN_D5_NAF5, NULL); - gpio_request(GPIO_FN_D6_NAF6, NULL); - gpio_request(GPIO_FN_D7_NAF7, NULL); - gpio_request(GPIO_FN_D8_NAF8, NULL); - gpio_request(GPIO_FN_D9_NAF9, NULL); - gpio_request(GPIO_FN_D10_NAF10, NULL); - gpio_request(GPIO_FN_D11_NAF11, NULL); - gpio_request(GPIO_FN_D12_NAF12, NULL); - gpio_request(GPIO_FN_D13_NAF13, NULL); - gpio_request(GPIO_FN_D14_NAF14, NULL); - gpio_request(GPIO_FN_D15_NAF15, NULL); - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_WE0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - gpio_request(GPIO_FN_A4_FOE, NULL); - gpio_request(GPIO_FN_A5_FCDE, NULL); - gpio_request(GPIO_FN_RD_FSC, NULL); - - /* enable GPS module (GT-720F) */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - - /* CEU */ - gpio_request(GPIO_FN_VIO_CLK, NULL); - gpio_request(GPIO_FN_VIO_VD, NULL); - gpio_request(GPIO_FN_VIO_HD, NULL); - gpio_request(GPIO_FN_VIO_FIELD, NULL); - gpio_request(GPIO_FN_VIO_CKO, NULL); - gpio_request(GPIO_FN_VIO_D7, NULL); - gpio_request(GPIO_FN_VIO_D6, NULL); - gpio_request(GPIO_FN_VIO_D5, NULL); - gpio_request(GPIO_FN_VIO_D4, NULL); - gpio_request(GPIO_FN_VIO_D3, NULL); - gpio_request(GPIO_FN_VIO_D2, NULL); - gpio_request(GPIO_FN_VIO_D1, NULL); - gpio_request(GPIO_FN_VIO_D0, NULL); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ srcr4 = __raw_readl(SRCR4); __raw_writel(srcr4 | (1 << 13), SRCR4); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc1..9112faef923 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/dma-mapping.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> @@ -173,15 +174,15 @@ static struct platform_device usb_phy_device = { static struct gpio_led marzen_leds[] = { { .name = "led2", - .gpio = 157, + .gpio = RCAR_GP_PIN(4, 29), .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led3", - .gpio = 158, + .gpio = RCAR_GP_PIN(4, 30), .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led4", - .gpio = 159, + .gpio = RCAR_GP_PIN(4, 31), .default_state = LEDS_GPIO_DEFSTATE_ON, }, }; @@ -212,8 +213,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +226,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index b2074e2acb1..d241bfd6926 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -16,4 +16,9 @@ #define IRQPIN_BASE 2000 #define irq_pin(nr) ((nr) + IRQPIN_BASE) +/* GPIO IRQ */ +#define _GPIO_IRQ_BASE 2500 +#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x)) +#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index abdc4d4efa2..9c9a66ccaf6 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -28,494 +28,6 @@ #define MD_CK1 (1 << 1) #define MD_CK0 (1 << 0) -/* - * Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* PORT */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, - - /* IRQ */ - GPIO_FN_IRQ0_PORT2, GPIO_FN_IRQ0_PORT13, - GPIO_FN_IRQ1, - GPIO_FN_IRQ2_PORT11, GPIO_FN_IRQ2_PORT12, - GPIO_FN_IRQ3_PORT10, GPIO_FN_IRQ3_PORT14, - GPIO_FN_IRQ4_PORT15, GPIO_FN_IRQ4_PORT172, - GPIO_FN_IRQ5_PORT0, GPIO_FN_IRQ5_PORT1, - GPIO_FN_IRQ6_PORT121, GPIO_FN_IRQ6_PORT173, - GPIO_FN_IRQ7_PORT120, GPIO_FN_IRQ7_PORT209, - GPIO_FN_IRQ8, - GPIO_FN_IRQ9_PORT118, GPIO_FN_IRQ9_PORT210, - GPIO_FN_IRQ10, - GPIO_FN_IRQ11, - GPIO_FN_IRQ12_PORT42, GPIO_FN_IRQ12_PORT97, - GPIO_FN_IRQ13_PORT64, GPIO_FN_IRQ13_PORT98, - GPIO_FN_IRQ14_PORT63, GPIO_FN_IRQ14_PORT99, - GPIO_FN_IRQ15_PORT62, GPIO_FN_IRQ15_PORT100, - GPIO_FN_IRQ16_PORT68, GPIO_FN_IRQ16_PORT211, - GPIO_FN_IRQ17, - GPIO_FN_IRQ18, - GPIO_FN_IRQ19, - GPIO_FN_IRQ20, - GPIO_FN_IRQ21, - GPIO_FN_IRQ22, - GPIO_FN_IRQ23, - GPIO_FN_IRQ24, - GPIO_FN_IRQ25, - GPIO_FN_IRQ26_PORT58, GPIO_FN_IRQ26_PORT81, - GPIO_FN_IRQ27_PORT57, GPIO_FN_IRQ27_PORT168, - GPIO_FN_IRQ28_PORT56, GPIO_FN_IRQ28_PORT169, - GPIO_FN_IRQ29_PORT50, GPIO_FN_IRQ29_PORT170, - GPIO_FN_IRQ30_PORT49, GPIO_FN_IRQ30_PORT171, - GPIO_FN_IRQ31_PORT41, GPIO_FN_IRQ31_PORT167, - - /* Function */ - - /* DBGT */ - GPIO_FN_DBGMDT2, GPIO_FN_DBGMDT1, GPIO_FN_DBGMDT0, - GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20, - GPIO_FN_DBGMD21, - - /* FSI-A */ - GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */ - GPIO_FN_FSIAISLD_PORT5, - GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */ - GPIO_FN_FSIASPDIF_PORT18, - GPIO_FN_FSIAOSLD1, GPIO_FN_FSIAOSLD2, - GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT, - GPIO_FN_FSIAOSLD, GPIO_FN_FSIAOMC, - GPIO_FN_FSIACK, GPIO_FN_FSIAILR, - GPIO_FN_FSIAIBT, - - /* FSI-B */ - GPIO_FN_FSIBCK, - - /* FMSI */ - GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */ - GPIO_FN_FMSISLD_PORT6, - GPIO_FN_FMSIILR, GPIO_FN_FMSIIBT, - GPIO_FN_FMSIOLR, GPIO_FN_FMSIOBT, - GPIO_FN_FMSICK, GPIO_FN_FMSOILR, - GPIO_FN_FMSOIBT, GPIO_FN_FMSOOLR, - GPIO_FN_FMSOOBT, GPIO_FN_FMSOSLD, - GPIO_FN_FMSOCK, - - /* SCIFA0 */ - GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_CTS, - GPIO_FN_SCIFA0_RTS, GPIO_FN_SCIFA0_RXD, - GPIO_FN_SCIFA0_TXD, - - /* SCIFA1 */ - GPIO_FN_SCIFA1_CTS, GPIO_FN_SCIFA1_SCK, - GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_TXD, - GPIO_FN_SCIFA1_RTS, - - /* SCIFA2 */ - GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */ - GPIO_FN_SCIFA2_SCK_PORT199, - GPIO_FN_SCIFA2_RXD, GPIO_FN_SCIFA2_TXD, - GPIO_FN_SCIFA2_CTS, GPIO_FN_SCIFA2_RTS, - - /* SCIFA3 */ - GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */ - GPIO_FN_SCIFA3_SCK_PORT116, - GPIO_FN_SCIFA3_CTS_PORT117, - GPIO_FN_SCIFA3_RXD_PORT174, - GPIO_FN_SCIFA3_TXD_PORT175, - - GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */ - GPIO_FN_SCIFA3_SCK_PORT158, - GPIO_FN_SCIFA3_CTS_PORT162, - GPIO_FN_SCIFA3_RXD_PORT159, - GPIO_FN_SCIFA3_TXD_PORT160, - - /* SCIFA4 */ - GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */ - GPIO_FN_SCIFA4_TXD_PORT13, - - GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */ - GPIO_FN_SCIFA4_TXD_PORT203, - - GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */ - GPIO_FN_SCIFA4_TXD_PORT93, - - GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */ - GPIO_FN_SCIFA4_SCK_PORT205, - - /* SCIFA5 */ - GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */ - GPIO_FN_SCIFA5_RXD_PORT10, - - GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */ - GPIO_FN_SCIFA5_TXD_PORT208, - - GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */ - GPIO_FN_SCIFA5_RXD_PORT92, - - GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */ - GPIO_FN_SCIFA5_SCK_PORT206, - - /* SCIFA6 */ - GPIO_FN_SCIFA6_SCK, GPIO_FN_SCIFA6_RXD, GPIO_FN_SCIFA6_TXD, - - /* SCIFA7 */ - GPIO_FN_SCIFA7_TXD, GPIO_FN_SCIFA7_RXD, - - /* SCIFAB */ - GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */ - GPIO_FN_SCIFB_RXD_PORT191, - GPIO_FN_SCIFB_TXD_PORT192, - GPIO_FN_SCIFB_RTS_PORT186, - GPIO_FN_SCIFB_CTS_PORT187, - - GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */ - GPIO_FN_SCIFB_RXD_PORT3, - GPIO_FN_SCIFB_TXD_PORT4, - GPIO_FN_SCIFB_RTS_PORT172, - GPIO_FN_SCIFB_CTS_PORT173, - - /* LCD0 */ - GPIO_FN_LCDC0_SELECT, - - /* LCD1 */ - GPIO_FN_LCDC1_SELECT, - - /* RSPI */ - GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A, - GPIO_FN_RSPI_SSL2_A, GPIO_FN_RSPI_SSL3_A, - GPIO_FN_RSPI_MOSI_A, GPIO_FN_RSPI_MISO_A, - GPIO_FN_RSPI_CK_A, - - /* VIO CKO */ - GPIO_FN_VIO_CKO1, - GPIO_FN_VIO_CKO2, - GPIO_FN_VIO_CKO_1, - GPIO_FN_VIO_CKO, - - /* VIO0 */ - GPIO_FN_VIO0_D0, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D2, - GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D4, GPIO_FN_VIO0_D5, - GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D8, - GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D11, - GPIO_FN_VIO0_D12, GPIO_FN_VIO0_VD, GPIO_FN_VIO0_HD, - GPIO_FN_VIO0_CLK, GPIO_FN_VIO0_FIELD, - - GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */ - GPIO_FN_VIO0_D14_PORT25, - GPIO_FN_VIO0_D15_PORT24, - - GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */ - GPIO_FN_VIO0_D14_PORT95, - GPIO_FN_VIO0_D15_PORT96, - - /* VIO1 */ - GPIO_FN_VIO1_D0, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D2, - GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D4, GPIO_FN_VIO1_D5, - GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D7, GPIO_FN_VIO1_VD, - GPIO_FN_VIO1_HD, GPIO_FN_VIO1_CLK, GPIO_FN_VIO1_FIELD, - - /* TPU0 */ - GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1, - GPIO_FN_TPU0TO3, - GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */ - GPIO_FN_TPU0TO2_PORT202, - - /* SSP1 0 */ - GPIO_FN_STP0_IPD0, GPIO_FN_STP0_IPD1, GPIO_FN_STP0_IPD2, - GPIO_FN_STP0_IPD3, GPIO_FN_STP0_IPD4, GPIO_FN_STP0_IPD5, - GPIO_FN_STP0_IPD6, GPIO_FN_STP0_IPD7, GPIO_FN_STP0_IPEN, - GPIO_FN_STP0_IPCLK, GPIO_FN_STP0_IPSYNC, - - /* SSP1 1 */ - GPIO_FN_STP1_IPD1, GPIO_FN_STP1_IPD2, GPIO_FN_STP1_IPD3, - GPIO_FN_STP1_IPD4, GPIO_FN_STP1_IPD5, GPIO_FN_STP1_IPD6, - GPIO_FN_STP1_IPD7, GPIO_FN_STP1_IPCLK, GPIO_FN_STP1_IPSYNC, - - GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */ - GPIO_FN_STP1_IPEN_PORT187, - - GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */ - GPIO_FN_STP1_IPEN_PORT193, - - /* SIM */ - GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, - GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */ - GPIO_FN_SIM_D_PORT199, - - /* MSIOF2 */ - GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK, - GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1, - GPIO_FN_MSIOF2_MCK1, GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_MSIOF2_RSCK, - - /* KEYSC */ - GPIO_FN_KEYIN4, GPIO_FN_KEYIN5, - GPIO_FN_KEYIN6, GPIO_FN_KEYIN7, - GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2, - GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4, GPIO_FN_KEYOUT5, - GPIO_FN_KEYOUT6, GPIO_FN_KEYOUT7, - - GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */ - GPIO_FN_KEYIN1_PORT44, - GPIO_FN_KEYIN2_PORT45, - GPIO_FN_KEYIN3_PORT46, - - GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */ - GPIO_FN_KEYIN1_PORT57, - GPIO_FN_KEYIN2_PORT56, - GPIO_FN_KEYIN3_PORT55, - - /* VOU */ - GPIO_FN_DV_D0, GPIO_FN_DV_D1, GPIO_FN_DV_D2, GPIO_FN_DV_D3, - GPIO_FN_DV_D4, GPIO_FN_DV_D5, GPIO_FN_DV_D6, GPIO_FN_DV_D7, - GPIO_FN_DV_D8, GPIO_FN_DV_D9, GPIO_FN_DV_D10, GPIO_FN_DV_D11, - GPIO_FN_DV_D12, GPIO_FN_DV_D13, GPIO_FN_DV_D14, GPIO_FN_DV_D15, - GPIO_FN_DV_CLK, - GPIO_FN_DV_VSYNC, - GPIO_FN_DV_HSYNC, - - /* MEMC */ - GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2, - GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5, - GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8, - GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11, - GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14, - GPIO_FN_MEMC_AD15, GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_INT, - GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_NOE, - - GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */ - GPIO_FN_MEMC_ADV, - GPIO_FN_MEMC_WAIT, - GPIO_FN_MEMC_BUSCLK, - - GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */ - GPIO_FN_MEMC_DREQ0, - GPIO_FN_MEMC_DREQ1, - GPIO_FN_MEMC_A0, - - /* MSIOF0 */ - GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2, - GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD, - GPIO_FN_MSIOF0_MCK0, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_MSIOF0_TSCK, GPIO_FN_MSIOF0_TSYNC, - - /* MSIOF1 */ - GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - - GPIO_FN_MSIOF1_SS2_PORT116, GPIO_FN_MSIOF1_SS1_PORT117, - GPIO_FN_MSIOF1_RXD_PORT118, GPIO_FN_MSIOF1_TXD_PORT119, - GPIO_FN_MSIOF1_TSYNC_PORT120, - GPIO_FN_MSIOF1_TSCK_PORT121, /* MSEL4CR_10_0 */ - - GPIO_FN_MSIOF1_SS1_PORT67, GPIO_FN_MSIOF1_TSCK_PORT72, - GPIO_FN_MSIOF1_TSYNC_PORT73, GPIO_FN_MSIOF1_TXD_PORT74, - GPIO_FN_MSIOF1_RXD_PORT75, - GPIO_FN_MSIOF1_SS2_PORT202, /* MSEL4CR_10_1 */ - - /* GPIO */ - GPIO_FN_GPO0, GPIO_FN_GPI0, - GPIO_FN_GPO1, GPIO_FN_GPI1, - - /* USB0 */ - GPIO_FN_USB0_OCI, GPIO_FN_USB0_PPON, GPIO_FN_VBUS, - - /* USB1 */ - GPIO_FN_USB1_OCI, GPIO_FN_USB1_PPON, - - /* BBIF1 */ - GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TXD, GPIO_FN_BBIF1_TSYNC, - GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC, - GPIO_FN_BBIF1_FLOW, GPIO_FN_BBIF1_RX_FLOW_N, - - /* BBIF2 */ - GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */ - GPIO_FN_BBIF2_RXD2_PORT60, - GPIO_FN_BBIF2_TSYNC2_PORT6, - GPIO_FN_BBIF2_TSCK2_PORT59, - - GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */ - GPIO_FN_BBIF2_TXD2_PORT183, - GPIO_FN_BBIF2_TSCK2_PORT89, - GPIO_FN_BBIF2_TSYNC2_PORT184, - - /* BSC / FLCTL / PCMCIA */ - GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4, - GPIO_FN_CS5B, GPIO_FN_CS6A, - GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */ - GPIO_FN_CS5A_PORT19, - GPIO_FN_IOIS16, /* ? */ - - GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3, - GPIO_FN_A4_FOE, /* share with FLCTL */ - GPIO_FN_A5_FCDE, /* share with FLCTL */ - GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9, - GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13, - GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17, - GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21, - GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25, - GPIO_FN_A26, - - GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, /* share with FLCTL */ - GPIO_FN_D2_NAF2, GPIO_FN_D3_NAF3, /* share with FLCTL */ - GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, /* share with FLCTL */ - GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, /* share with FLCTL */ - GPIO_FN_D8_NAF8, GPIO_FN_D9_NAF9, /* share with FLCTL */ - GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, /* share with FLCTL */ - GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, /* share with FLCTL */ - GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, /* share with FLCTL */ - - GPIO_FN_D16, GPIO_FN_D17, GPIO_FN_D18, GPIO_FN_D19, - GPIO_FN_D20, GPIO_FN_D21, GPIO_FN_D22, GPIO_FN_D23, - GPIO_FN_D24, GPIO_FN_D25, GPIO_FN_D26, GPIO_FN_D27, - GPIO_FN_D28, GPIO_FN_D29, GPIO_FN_D30, GPIO_FN_D31, - - GPIO_FN_WE0_FWE, /* share with FLCTL */ - GPIO_FN_WE1, - GPIO_FN_WE2_ICIORD, /* share with PCMCIA */ - GPIO_FN_WE3_ICIOWR, /* share with PCMCIA */ - GPIO_FN_CKO, GPIO_FN_BS, GPIO_FN_RDWR, - GPIO_FN_RD_FSC, /* share with FLCTL */ - GPIO_FN_WAIT_PORT177, /* WAIT Port 90/177 */ - GPIO_FN_WAIT_PORT90, - - GPIO_FN_FCE0, GPIO_FN_FCE1, GPIO_FN_FRB, /* FLCTL */ - - /* IRDA */ - GPIO_FN_IRDA_FIRSEL, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT, - - /* ATAPI */ - GPIO_FN_IDE_D0, GPIO_FN_IDE_D1, GPIO_FN_IDE_D2, - GPIO_FN_IDE_D3, GPIO_FN_IDE_D4, GPIO_FN_IDE_D5, - GPIO_FN_IDE_D6, GPIO_FN_IDE_D7, GPIO_FN_IDE_D8, - GPIO_FN_IDE_D9, GPIO_FN_IDE_D10, GPIO_FN_IDE_D11, - GPIO_FN_IDE_D12, GPIO_FN_IDE_D13, GPIO_FN_IDE_D14, - GPIO_FN_IDE_D15, GPIO_FN_IDE_A0, GPIO_FN_IDE_A1, - GPIO_FN_IDE_A2, GPIO_FN_IDE_CS0, GPIO_FN_IDE_CS1, - GPIO_FN_IDE_IOWR, GPIO_FN_IDE_IORD, GPIO_FN_IDE_IORDY, - GPIO_FN_IDE_INT, GPIO_FN_IDE_RST, GPIO_FN_IDE_DIRECTION, - GPIO_FN_IDE_EXBUF_ENB, GPIO_FN_IDE_IODACK, GPIO_FN_IDE_IODREQ, - - /* RMII */ - GPIO_FN_RMII_CRS_DV, GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_RXD0, - GPIO_FN_RMII_RXD1, GPIO_FN_RMII_TX_EN, GPIO_FN_RMII_TXD0, - GPIO_FN_RMII_MDC, GPIO_FN_RMII_TXD1, GPIO_FN_RMII_MDIO, - GPIO_FN_RMII_REF50CK, /* for RMII */ - GPIO_FN_RMII_REF125CK, /* for GMII */ - - /* GEther */ - GPIO_FN_ET_TX_CLK, GPIO_FN_ET_TX_EN, GPIO_FN_ET_ETXD0, - GPIO_FN_ET_ETXD1, GPIO_FN_ET_ETXD2, GPIO_FN_ET_ETXD3, - GPIO_FN_ET_ETXD4, GPIO_FN_ET_ETXD5, /* for GEther */ - GPIO_FN_ET_ETXD6, GPIO_FN_ET_ETXD7, /* for GEther */ - GPIO_FN_ET_COL, GPIO_FN_ET_TX_ER, - GPIO_FN_ET_RX_CLK, GPIO_FN_ET_RX_DV, - GPIO_FN_ET_ERXD0, GPIO_FN_ET_ERXD1, - GPIO_FN_ET_ERXD2, GPIO_FN_ET_ERXD3, - GPIO_FN_ET_ERXD4, GPIO_FN_ET_ERXD5, /* for GEther */ - GPIO_FN_ET_ERXD6, GPIO_FN_ET_ERXD7, /* for GEther */ - GPIO_FN_ET_RX_ER, GPIO_FN_ET_CRS, - GPIO_FN_ET_MDC, GPIO_FN_ET_MDIO, - GPIO_FN_ET_LINK, GPIO_FN_ET_PHY_INT, - GPIO_FN_ET_WOL, GPIO_FN_ET_GTX_CLK, - - /* DMA0 */ - GPIO_FN_DREQ0, GPIO_FN_DACK0, - - /* DMA1 */ - GPIO_FN_DREQ1, GPIO_FN_DACK1, - - /* SYSC */ - GPIO_FN_RESETOUTS, - GPIO_FN_RESETP_PULLUP, - GPIO_FN_RESETP_PLAIN, - - /* HDMI */ - GPIO_FN_HDMI_HPD, - GPIO_FN_HDMI_CEC, - - /* SDENC */ - GPIO_FN_SDENC_CPG, - GPIO_FN_SDENC_DV_CLKI, - - /* IRREM */ - GPIO_FN_IROUT, - - /* DEBUG */ - GPIO_FN_EDEBGREQ_PULLDOWN, - GPIO_FN_EDEBGREQ_PULLUP, - - GPIO_FN_TRACEAUD_FROM_VIO, - GPIO_FN_TRACEAUD_FROM_LCDC0, - GPIO_FN_TRACEAUD_FROM_MEMC, -}; - /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 951149e6bcc..68053fc4d9d 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -28,5 +28,6 @@ extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); +extern void r8a7778_pinmux_init(void); #endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index fd7cba024c3..e882717ca97 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -15,397 +15,6 @@ #include <linux/pm_domain.h> #include <mach/pm-rmobile.h> -/* - * Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* PORT */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, - - /* IRQ */ - GPIO_FN_IRQ0_6, /* PORT 6 */ - GPIO_FN_IRQ0_162, /* PORT 162 */ - GPIO_FN_IRQ1, /* PORT 12 */ - GPIO_FN_IRQ2_4, /* PORT 4 */ - GPIO_FN_IRQ2_5, /* PORT 5 */ - GPIO_FN_IRQ3_8, /* PORT 8 */ - GPIO_FN_IRQ3_16, /* PORT 16 */ - GPIO_FN_IRQ4_17, /* PORT 17 */ - GPIO_FN_IRQ4_163, /* PORT 163 */ - GPIO_FN_IRQ5, /* PORT 18 */ - GPIO_FN_IRQ6_39, /* PORT 39 */ - GPIO_FN_IRQ6_164, /* PORT 164 */ - GPIO_FN_IRQ7_40, /* PORT 40 */ - GPIO_FN_IRQ7_167, /* PORT 167 */ - GPIO_FN_IRQ8_41, /* PORT 41 */ - GPIO_FN_IRQ8_168, /* PORT 168 */ - GPIO_FN_IRQ9_42, /* PORT 42 */ - GPIO_FN_IRQ9_169, /* PORT 169 */ - GPIO_FN_IRQ10, /* PORT 65 */ - GPIO_FN_IRQ11, /* PORT 67 */ - GPIO_FN_IRQ12_80, /* PORT 80 */ - GPIO_FN_IRQ12_137, /* PORT 137 */ - GPIO_FN_IRQ13_81, /* PORT 81 */ - GPIO_FN_IRQ13_145, /* PORT 145 */ - GPIO_FN_IRQ14_82, /* PORT 82 */ - GPIO_FN_IRQ14_146, /* PORT 146 */ - GPIO_FN_IRQ15_83, /* PORT 83 */ - GPIO_FN_IRQ15_147, /* PORT 147 */ - GPIO_FN_IRQ16_84, /* PORT 84 */ - GPIO_FN_IRQ16_170, /* PORT 170 */ - GPIO_FN_IRQ17, /* PORT 85 */ - GPIO_FN_IRQ18, /* PORT 86 */ - GPIO_FN_IRQ19, /* PORT 87 */ - GPIO_FN_IRQ20, /* PORT 92 */ - GPIO_FN_IRQ21, /* PORT 93 */ - GPIO_FN_IRQ22, /* PORT 94 */ - GPIO_FN_IRQ23, /* PORT 95 */ - GPIO_FN_IRQ24, /* PORT 112 */ - GPIO_FN_IRQ25, /* PORT 119 */ - GPIO_FN_IRQ26_121, /* PORT 121 */ - GPIO_FN_IRQ26_172, /* PORT 172 */ - GPIO_FN_IRQ27_122, /* PORT 122 */ - GPIO_FN_IRQ27_180, /* PORT 180 */ - GPIO_FN_IRQ28_123, /* PORT 123 */ - GPIO_FN_IRQ28_181, /* PORT 181 */ - GPIO_FN_IRQ29_129, /* PORT 129 */ - GPIO_FN_IRQ29_182, /* PORT 182 */ - GPIO_FN_IRQ30_130, /* PORT 130 */ - GPIO_FN_IRQ30_183, /* PORT 183 */ - GPIO_FN_IRQ31_138, /* PORT 138 */ - GPIO_FN_IRQ31_184, /* PORT 184 */ - - /* - * MSIOF0 (PORT 36, 37, 38, 39 - * 40, 41, 42, 43, 44, 45) - */ - GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_MSIOF0_MCK1, GPIO_FN_MSIOF0_SS1, - GPIO_FN_MSIOF0_SS2, GPIO_FN_MSIOF0_TXD, - - /* - * MSIOF1 (PORT 39, 40, 41, 42, 43, 44 - * 84, 85, 86, 87, 88, 89, 90, 91, 92, 93) - */ - GPIO_FN_MSIOF1_TSCK_39, GPIO_FN_MSIOF1_TSYNC_40, - GPIO_FN_MSIOF1_TSCK_88, GPIO_FN_MSIOF1_TSYNC_89, - GPIO_FN_MSIOF1_TXD_41, GPIO_FN_MSIOF1_RXD_42, - GPIO_FN_MSIOF1_TXD_90, GPIO_FN_MSIOF1_RXD_91, - GPIO_FN_MSIOF1_SS1_43, GPIO_FN_MSIOF1_SS2_44, - GPIO_FN_MSIOF1_SS1_92, GPIO_FN_MSIOF1_SS2_93, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - - /* - * MSIOF2 (PORT 134, 135, 136, 137, 138, 139 - * 148, 149, 150, 151) - */ - GPIO_FN_MSIOF2_RSCK, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_MSIOF2_SS1, GPIO_FN_MSIOF2_SS2, - GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_TSCK, - GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TXD, - - /* MSIOF3 (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ - GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TSYNC, - GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_TXD, - GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC, - GPIO_FN_BBIF1_FLOW, GPIO_FN_BB_RX_FLOW_N, - - /* MSIOF4 (PORT 0, 1, 2, 3) */ - GPIO_FN_BBIF2_TSCK1, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_BBIF2_TXD1, GPIO_FN_BBIF2_RXD, - - /* FSI (PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */ - GPIO_FN_FSIACK, GPIO_FN_FSIBCK, - GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT, - GPIO_FN_FSIAISLD, GPIO_FN_FSIAOMC, - GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT, - GPIO_FN_FSIAOSLD, GPIO_FN_FSIASPDIF_11, - GPIO_FN_FSIASPDIF_15, - - /* FMSI (PORT 12, 13, 14, 15, 16, 17, 18, 65) */ - GPIO_FN_FMSOCK, GPIO_FN_FMSOOLR, - GPIO_FN_FMSIOLR, GPIO_FN_FMSOOBT, - GPIO_FN_FMSIOBT, GPIO_FN_FMSOSLD, - GPIO_FN_FMSOILR, GPIO_FN_FMSIILR, - GPIO_FN_FMSOIBT, GPIO_FN_FMSIIBT, - GPIO_FN_FMSISLD, GPIO_FN_FMSICK, - - /* SCIFA0 (PORT 152, 153, 156, 157, 158) */ - GPIO_FN_SCIFA0_TXD, GPIO_FN_SCIFA0_RXD, - GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_RTS, - GPIO_FN_SCIFA0_CTS, - - /* SCIFA1 (PORT 154, 155, 159, 160, 161) */ - GPIO_FN_SCIFA1_TXD, GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_SCK, GPIO_FN_SCIFA1_RTS, - GPIO_FN_SCIFA1_CTS, - - /* SCIFA2 (PORT 94, 95, 96, 97, 98) */ - GPIO_FN_SCIFA2_CTS1, GPIO_FN_SCIFA2_RTS1, - GPIO_FN_SCIFA2_TXD1, GPIO_FN_SCIFA2_RXD1, - GPIO_FN_SCIFA2_SCK1, - - /* SCIFA3 (PORT 43, 44, - 140, 141, 142, 143, 144) */ - GPIO_FN_SCIFA3_CTS_43, GPIO_FN_SCIFA3_CTS_140, - GPIO_FN_SCIFA3_RTS_44, GPIO_FN_SCIFA3_RTS_141, - GPIO_FN_SCIFA3_SCK, GPIO_FN_SCIFA3_TXD, - GPIO_FN_SCIFA3_RXD, - - /* SCIFA4 (PORT 5, 6) */ - GPIO_FN_SCIFA4_RXD, GPIO_FN_SCIFA4_TXD, - - /* SCIFA5 (PORT 8, 12) */ - GPIO_FN_SCIFA5_RXD, GPIO_FN_SCIFA5_TXD, - - /* SCIFB (PORT 162, 163, 164, 165, 166) */ - GPIO_FN_SCIFB_SCK, GPIO_FN_SCIFB_RTS, - GPIO_FN_SCIFB_CTS, GPIO_FN_SCIFB_TXD, - GPIO_FN_SCIFB_RXD, - - /* - * CEU (PORT 16, 17, - * 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, - * 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, - * 120) - */ - GPIO_FN_VIO_HD, GPIO_FN_VIO_CKO1, GPIO_FN_VIO_CKO2, - GPIO_FN_VIO_VD, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, - GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, - GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, - GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, - GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, - GPIO_FN_VIO_D15, - - /* USB0 (PORT 113, 114, 115, 116, 117, 167) */ - GPIO_FN_IDIN_0, GPIO_FN_EXTLP_0, - GPIO_FN_OVCN2_0, GPIO_FN_PWEN_0, - GPIO_FN_OVCN_0, GPIO_FN_VBUS0_0, - - /* USB1 (PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */ - GPIO_FN_IDIN_1_18, GPIO_FN_IDIN_1_113, - GPIO_FN_PWEN_1_115, GPIO_FN_PWEN_1_138, - GPIO_FN_OVCN_1_114, GPIO_FN_OVCN_1_162, - GPIO_FN_EXTLP_1, GPIO_FN_OVCN2_1, - GPIO_FN_VBUS0_1, - - /* GPIO (PORT 41, 42, 43, 44) */ - GPIO_FN_GPI0, GPIO_FN_GPI1, GPIO_FN_GPO0, GPIO_FN_GPO1, - - /* - * BSC (PORT 19, - * 20, 21, 22, 25, 26, 27, 28, 29, - * 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, - * 40, 41, 42, 43, 44, 45, - * 62, 63, 64, 65, 66, 67, - * 71, 72, 74, 75) - */ - GPIO_FN_BS, GPIO_FN_WE1, - GPIO_FN_CKO, GPIO_FN_WAIT, GPIO_FN_RDWR, - - GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3, - GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9, - GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13, - GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17, - GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21, - GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25, - GPIO_FN_A26, - - GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4, - GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_CS6A, - - /* - * BSC/FLCTL (PORT 23, 24, - * 46, 47, 48, 49, - * 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, - * 60, 61, 69, 70) - */ - GPIO_FN_RD_FSC, GPIO_FN_WE0_FWE, - GPIO_FN_A4_FOE, GPIO_FN_A5_FCDE, - GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, GPIO_FN_D2_NAF2, - GPIO_FN_D3_NAF3, GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, - GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, GPIO_FN_D8_NAF8, - GPIO_FN_D9_NAF9, GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, - GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14, - GPIO_FN_D15_NAF15, - - /* SPU2 (PORT 65) */ - GPIO_FN_VINT_I, - - /* FLCTL (PORT 66, 68, 73) */ - GPIO_FN_FCE1, GPIO_FN_FCE0, GPIO_FN_FRB, - - /* HSI (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ - GPIO_FN_GP_RX_FLAG, GPIO_FN_GP_RX_DATA, GPIO_FN_GP_TX_READY, - GPIO_FN_GP_RX_WAKE, GPIO_FN_MP_TX_FLAG, GPIO_FN_MP_TX_DATA, - GPIO_FN_MP_RX_READY, GPIO_FN_MP_TX_WAKE, - - /* - * MFI (PORT 76, 77, 78, 79, - * 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, - * 90, 91, 92, 93, 94, 95, 96, 97, 98, 99) - */ - GPIO_FN_MFIv6, /* see MSEL4CR 6 */ - GPIO_FN_MFIv4, /* see MSEL4CR 6 */ - - GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_BUSCLK_MEMC_A0, - GPIO_FN_MEMC_CS1_MEMC_A1, GPIO_FN_MEMC_ADV_MEMC_DREQ0, - GPIO_FN_MEMC_WAIT_MEMC_DREQ1, GPIO_FN_MEMC_NOE, - GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_INT, - - GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2, - GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5, - GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8, - GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11, - GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14, - GPIO_FN_MEMC_AD15, - - /* SIM (PORT 94, 95, 98) */ - GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, GPIO_FN_SIM_D, - - /* TPU (PORT 93, 99, 112, 160, 161) */ - GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1, - GPIO_FN_TPU0TO2_93, GPIO_FN_TPU0TO2_99, - GPIO_FN_TPU0TO3, - - /* I2C2 (PORT 110, 111) */ - GPIO_FN_I2C_SCL2, GPIO_FN_I2C_SDA2, - - /* I2C3(1) (PORT 114, 115) */ - GPIO_FN_I2C_SCL3, GPIO_FN_I2C_SDA3, - - /* I2C3(2) (PORT 137, 145) */ - GPIO_FN_I2C_SCL3S, GPIO_FN_I2C_SDA3S, - - /* I2C4(2) (PORT 116, 117) */ - GPIO_FN_I2C_SCL4, GPIO_FN_I2C_SDA4, - - /* I2C4(2) (PORT 146, 147) */ - GPIO_FN_I2C_SCL4S, GPIO_FN_I2C_SDA4S, - - /* - * KEYSC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, - * 130, 131, 132, 133, 134, 135, 136) - */ - GPIO_FN_KEYOUT0, GPIO_FN_KEYIN0_121, GPIO_FN_KEYIN0_136, - GPIO_FN_KEYOUT1, GPIO_FN_KEYIN1_122, GPIO_FN_KEYIN1_135, - GPIO_FN_KEYOUT2, GPIO_FN_KEYIN2_123, GPIO_FN_KEYIN2_134, - GPIO_FN_KEYOUT3, GPIO_FN_KEYIN3_124, GPIO_FN_KEYIN3_133, - GPIO_FN_KEYOUT4, GPIO_FN_KEYIN4, - GPIO_FN_KEYOUT5, GPIO_FN_KEYIN5, - GPIO_FN_KEYOUT6, GPIO_FN_KEYIN6, - GPIO_FN_KEYOUT7, GPIO_FN_KEYIN7, - - /* - * LCDC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, - * 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, - * 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, - * 150, 151) - */ - GPIO_FN_LCDC0_SELECT, /* LCDC 0 */ - GPIO_FN_LCDC1_SELECT, /* LCDC 1 */ - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDVSYN, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_LCDRD, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDLCLK, - GPIO_FN_LCDDON, - - GPIO_FN_LCDD0, GPIO_FN_LCDD1, GPIO_FN_LCDD2, GPIO_FN_LCDD3, - GPIO_FN_LCDD4, GPIO_FN_LCDD5, GPIO_FN_LCDD6, GPIO_FN_LCDD7, - GPIO_FN_LCDD8, GPIO_FN_LCDD9, GPIO_FN_LCDD10, GPIO_FN_LCDD11, - GPIO_FN_LCDD12, GPIO_FN_LCDD13, GPIO_FN_LCDD14, GPIO_FN_LCDD15, - GPIO_FN_LCDD16, GPIO_FN_LCDD17, GPIO_FN_LCDD18, GPIO_FN_LCDD19, - GPIO_FN_LCDD20, GPIO_FN_LCDD21, GPIO_FN_LCDD22, GPIO_FN_LCDD23, - - /* IRDA (PORT 139, 140, 141, 142) */ - GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, - GPIO_FN_IROUT_139, GPIO_FN_IROUT_140, - - /* TSIF1 (PORT 156, 157, 158, 159) */ - GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */ - GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */ - GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */ - GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */ - - GPIO_FN_TS_SPSYNC1, GPIO_FN_TS_SDAT1, - GPIO_FN_TS_SDEN1, GPIO_FN_TS_SCK1, - - /* TSIF2 (PORT 137, 145, 146, 147) */ - GPIO_FN_TS_SPSYNC2, GPIO_FN_TS_SDAT2, - GPIO_FN_TS_SDEN2, GPIO_FN_TS_SCK2, - - /* HDMI (PORT 169, 170) */ - GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC, - - /* SDENC see MSEL4CR 19 */ - GPIO_FN_SDENC_CPG, - GPIO_FN_SDENC_DV_CLKI, -}; - /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 326a4ab0bd5..3a6b6fe7b6c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -70,29 +70,15 @@ void __init r8a7740_map_io(void) } /* PFC */ -static struct resource r8a7740_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605800c, - .end = 0xe605802b, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device r8a7740_pfc_device = { - .name = "pfc-r8a7740", - .id = -1, - .resource = r8a7740_pfc_resources, - .num_resources = ARRAY_SIZE(r8a7740_pfc_resources), +static const struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605800c, 0x0020), }; void __init r8a7740_pinmux_init(void) { - platform_device_register(&r8a7740_pfc_device); + platform_device_register_simple("pfc-r8a7740", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct renesas_intc_irqpin_config irqpin0_platform_data = { diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 30b4a336308..1f36ecc322a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,6 +24,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> #include <linux/irqchip.h> @@ -94,6 +95,52 @@ static struct resource ether_resources[] = { &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) +/* PFC/GPIO */ +static struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xfffc0000, 0x118), +}; + +#define R8A7778_GPIO(idx) \ +static struct resource r8a7778_gpio##idx##_resources[] = { \ + DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ + DEFINE_RES_IRQ(gic_iid(0x87)), \ +}; \ + \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = GPIO_IRQ_BASE(idx), \ + .number_of_pins = 32, \ + .pctl_name = "pfc-r8a7778", \ +} + +R8A7778_GPIO(0); +R8A7778_GPIO(1); +R8A7778_GPIO(2); +R8A7778_GPIO(3); +R8A7778_GPIO(4); + +#define r8a7778_register_gpio(idx) \ + platform_device_register_resndata( \ + &platform_bus, "gpio_rcar", idx, \ + r8a7778_gpio##idx##_resources, \ + ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ + &r8a7778_gpio##idx##_platform_data, \ + sizeof(r8a7778_gpio##idx##_platform_data)) + +void __init r8a7778_pinmux_init(void) +{ + platform_device_register_simple( + "pfc-r8a7778", -1, + pfc_resources, + ARRAY_SIZE(pfc_resources)); + + r8a7778_register_gpio(0); + r8a7778_register_gpio(1); + r8a7778_register_gpio(2); + r8a7778_register_gpio(3); + r8a7778_register_gpio(4); +} + void __init r8a7778_add_standard_devices(void) { int i; diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index b0b394842ea..dbb13f289e7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -65,11 +65,7 @@ void __init r8a7779_map_io(void) } static struct resource r8a7779_pfc_resources[] = { - [0] = { - .start = 0xfffc0000, - .end = 0xfffc023b, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(0xfffc0000, 0x023c), }; static struct platform_device r8a7779_pfc_device = { @@ -81,15 +77,8 @@ static struct platform_device r8a7779_pfc_device = { #define R8A7779_GPIO(idx, npins) \ static struct resource r8a7779_gpio##idx##_resources[] = { \ - [0] = { \ - .start = 0xffc40000 + 0x1000 * (idx), \ - .end = 0xffc4002b + 0x1000 * (idx), \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = gic_iid(0xad + (idx)), \ - .flags = IORESOURCE_IRQ, \ - } \ + DEFINE_RES_MEM(0xffc40000 + (0x1000 * (idx)), 0x002c), \ + DEFINE_RES_IRQ(gic_iid(0xad + (idx))), \ }; \ \ static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = { \ diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 49de2d56f86..b461d93431e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/serial_sci.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-irqc.h> #include <mach/common.h> #include <mach/irqs.h> @@ -31,13 +32,46 @@ static const struct resource pfc_resources[] = { DEFINE_RES_MEM(0xe6060000, 0x250), - DEFINE_RES_MEM(0xe6050000, 0x5050), }; +#define R8A7790_GPIO(idx) \ +static struct resource r8a7790_gpio##idx##_resources[] = { \ + DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \ + DEFINE_RES_IRQ(gic_spi(4 + (idx))), \ +}; \ + \ +static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = 0, \ + .number_of_pins = 32, \ + .pctl_name = "pfc-r8a7790", \ + .has_both_edge_trigger = 1, \ +}; \ + +R8A7790_GPIO(0); +R8A7790_GPIO(1); +R8A7790_GPIO(2); +R8A7790_GPIO(3); +R8A7790_GPIO(4); +R8A7790_GPIO(5); + +#define r8a7790_register_gpio(idx) \ + platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \ + r8a7790_gpio##idx##_resources, \ + ARRAY_SIZE(r8a7790_gpio##idx##_resources), \ + &r8a7790_gpio##idx##_platform_data, \ + sizeof(r8a7790_gpio##idx##_platform_data)) + void __init r8a7790_pinmux_init(void) { platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, ARRAY_SIZE(pfc_resources)); + r8a7790_register_gpio(0); + r8a7790_register_gpio(1); + r8a7790_register_gpio(2); + r8a7790_register_gpio(3); + r8a7790_register_gpio(4); + r8a7790_register_gpio(5); } #define SCIF_COMMON(scif_type, baseaddr, irq) \ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fdf3894b1cc..9696f364686 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clockevent_rating = 125, + .clockevent_rating = 80, .clocksource_rating = 125, }; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 566e804d403..a279fb31506 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -7,7 +7,6 @@ config ARCH_SOCFPGA select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 - select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 46a051359f0..8ea11b472b9 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -14,7 +14,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/dw_apb_timer.h> #include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> @@ -120,7 +119,6 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, - .init_time = dw_apb_timer_init, .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d74..5b045e302b4 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 9e8bdfa2b36..31e69a019bd 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "missing register base\n"); - return -ENOMEM; - } - emc_regbase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(emc_regbase)) return PTR_ERR(emc_regbase); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df..b19b07204aa 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 33c353bc1c4..d6b7c8556fa 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index fcf06accb66..df5d27a532e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -413,15 +413,6 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } -void mop500_snowball_ethernet_clock_enable(void) -{ - struct clk *clk; - - clk = clk_get_sys("fsmc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = DMA_MEM_TO_DEV, @@ -584,7 +575,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -621,7 +612,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -635,8 +626,6 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); - mop500_snowball_ethernet_clock_enable(); - u8500_cryp1_hash1_init(parent); /* This board has full regulator constraints */ @@ -661,7 +650,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 6f0bfcb0890..d6fab166cbf 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -105,7 +105,6 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a40afd9d6e9..cd4b0a08bbf 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -195,7 +195,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -209,8 +209,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; @@ -246,7 +244,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), @@ -281,7 +279,6 @@ static void __init u8500_init_machine(void) mop500_pinmaps_init(); else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - mop500_snowball_ethernet_clock_enable(); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index 317a2be129f..a45dd09daed 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -21,6 +21,7 @@ #include <asm/proc-fns.h> #include "db8500-regs.h" +#include "id.h" static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); @@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = { int __init ux500_idle_init(void) { + if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) + return -ENODEV; + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b4937..cad3ca86c54 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281efc02..f5c33df7a59 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ce66eb9be48..f82bae2171e 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MBOX_FWK - tristate "Mailbox framework support" - depends on ARCH_OMAP && !ARCH_MULTIPLATFORM - help - Say Y here if you want to use OMAP Mailbox framework support for - DSP, IVA1.0 and IVA2 in OMAP1/2/3. - -config OMAP_MBOX_KFIFO_SIZE - int "Mailbox kfifo default buffer size (bytes)" - depends on OMAP_MBOX_FWK - default 256 - help - Specify the default size of mailbox's kfifo buffers (bytes). - This can also be changed at runtime (via the mbox_kfifo_size - module parameter). - config OMAP_IOMMU_IVA2 bool diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 31199417b56..0b01b68fd03 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) -# OMAP mailbox framework -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o - diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h deleted file mode 100644 index cc3921e9059..00000000000 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ /dev/null @@ -1,105 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/kfifo.h> - -typedef u32 mbox_msg_t; -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - /* ctx */ - void (*save_ctx)(struct omap_mbox *mbox); - void (*restore_ctx)(struct omap_mbox *mbox); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct kfifo fifo; - struct work_struct work; - struct tasklet_struct tasklet; - struct omap_mbox *mbox; - bool full; -}; - -struct omap_mbox { - char *name; - unsigned int irq; - struct omap_mbox_queue *txq, *rxq; - struct omap_mbox_ops *ops; - struct device *dev; - void *priv; - int use_count; - struct blocking_notifier_head notifier; -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb); -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb); - -int omap_mbox_register(struct device *parent, struct omap_mbox **); -int omap_mbox_unregister(void); - -static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->save_ctx) { - dev_err(mbox->dev, "%s:\tno save\n", __func__); - return; - } - - mbox->ops->save_ctx(mbox); -} - -static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->restore_ctx) { - dev_err(mbox->dev, "%s:\tno restore\n", __func__); - return; - } - - mbox->ops->restore_ctx(mbox); -} - -static inline void omap_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->enable_irq(mbox, irq); -} - -static inline void omap_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->disable_irq(mbox, irq); -} - -#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c deleted file mode 100644 index 42377ef9ea3..00000000000 --- a/arch/arm/plat-omap/mailbox.c +++ /dev/null @@ -1,435 +0,0 @@ -/* - * OMAP mailbox driver - * - * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved. - * - * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/kfifo.h> -#include <linux/err.h> -#include <linux/notifier.h> -#include <linux/module.h> - -#include <plat/mailbox.h> - -static struct omap_mbox **mboxes; - -static int mbox_configured; -static DEFINE_MUTEX(mbox_configured_lock); - -static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE; -module_param(mbox_kfifo_size, uint, S_IRUGO); -MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)"); - -/* Mailbox FIFO handle functions */ -static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_read(mbox); -} -static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox->ops->fifo_write(mbox, msg); -} -static inline int mbox_fifo_empty(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_empty(mbox); -} -static inline int mbox_fifo_full(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_full(mbox); -} - -/* Mailbox IRQ handle functions */ -static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (mbox->ops->ack_irq) - mbox->ops->ack_irq(mbox, irq); -} -static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - return mbox->ops->is_irq(mbox, irq); -} - -/* - * message sender - */ -static int __mbox_poll_for_space(struct omap_mbox *mbox) -{ - int ret = 0, i = 1000; - - while (mbox_fifo_full(mbox)) { - if (mbox->ops->type == OMAP_MBOX_TYPE2) - return -1; - if (--i == 0) - return -1; - udelay(1); - } - return ret; -} - -int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox_queue *mq = mbox->txq; - int ret = 0, len; - - spin_lock_bh(&mq->lock); - - if (kfifo_avail(&mq->fifo) < sizeof(msg)) { - ret = -ENOMEM; - goto out; - } - - if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) { - mbox_fifo_write(mbox, msg); - goto out; - } - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - tasklet_schedule(&mbox->txq->tasklet); - -out: - spin_unlock_bh(&mq->lock); - return ret; -} -EXPORT_SYMBOL(omap_mbox_msg_send); - -static void mbox_tx_tasklet(unsigned long tx_data) -{ - struct omap_mbox *mbox = (struct omap_mbox *)tx_data; - struct omap_mbox_queue *mq = mbox->txq; - mbox_msg_t msg; - int ret; - - while (kfifo_len(&mq->fifo)) { - if (__mbox_poll_for_space(mbox)) { - omap_mbox_enable_irq(mbox, IRQ_TX); - break; - } - - ret = kfifo_out(&mq->fifo, (unsigned char *)&msg, - sizeof(msg)); - WARN_ON(ret != sizeof(msg)); - - mbox_fifo_write(mbox, msg); - } -} - -/* - * Message receiver(workqueue) - */ -static void mbox_rx_work(struct work_struct *work) -{ - struct omap_mbox_queue *mq = - container_of(work, struct omap_mbox_queue, work); - mbox_msg_t msg; - int len; - - while (kfifo_len(&mq->fifo) >= sizeof(msg)) { - len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - blocking_notifier_call_chain(&mq->mbox->notifier, len, - (void *)msg); - spin_lock_irq(&mq->lock); - if (mq->full) { - mq->full = false; - omap_mbox_enable_irq(mq->mbox, IRQ_RX); - } - spin_unlock_irq(&mq->lock); - } -} - -/* - * Mailbox interrupt handler - */ -static void __mbox_tx_interrupt(struct omap_mbox *mbox) -{ - omap_mbox_disable_irq(mbox, IRQ_TX); - ack_mbox_irq(mbox, IRQ_TX); - tasklet_schedule(&mbox->txq->tasklet); -} - -static void __mbox_rx_interrupt(struct omap_mbox *mbox) -{ - struct omap_mbox_queue *mq = mbox->rxq; - mbox_msg_t msg; - int len; - - while (!mbox_fifo_empty(mbox)) { - if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) { - omap_mbox_disable_irq(mbox, IRQ_RX); - mq->full = true; - goto nomem; - } - - msg = mbox_fifo_read(mbox); - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - if (mbox->ops->type == OMAP_MBOX_TYPE1) - break; - } - - /* no more messages in the fifo. clear IRQ source. */ - ack_mbox_irq(mbox, IRQ_RX); -nomem: - schedule_work(&mbox->rxq->work); -} - -static irqreturn_t mbox_interrupt(int irq, void *p) -{ - struct omap_mbox *mbox = p; - - if (is_mbox_irq(mbox, IRQ_TX)) - __mbox_tx_interrupt(mbox); - - if (is_mbox_irq(mbox, IRQ_RX)) - __mbox_rx_interrupt(mbox); - - return IRQ_HANDLED; -} - -static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, - void (*work) (struct work_struct *), - void (*tasklet)(unsigned long)) -{ - struct omap_mbox_queue *mq; - - mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL); - if (!mq) - return NULL; - - spin_lock_init(&mq->lock); - - if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL)) - goto error; - - if (work) - INIT_WORK(&mq->work, work); - - if (tasklet) - tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox); - return mq; -error: - kfree(mq); - return NULL; -} - -static void mbox_queue_free(struct omap_mbox_queue *q) -{ - kfifo_free(&q->fifo); - kfree(q); -} - -static int omap_mbox_startup(struct omap_mbox *mbox) -{ - int ret = 0; - struct omap_mbox_queue *mq; - - mutex_lock(&mbox_configured_lock); - if (!mbox_configured++) { - if (likely(mbox->ops->startup)) { - ret = mbox->ops->startup(mbox); - if (unlikely(ret)) - goto fail_startup; - } else - goto fail_startup; - } - - if (!mbox->use_count++) { - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, - mbox->name, mbox); - if (unlikely(ret)) { - pr_err("failed to register mailbox interrupt:%d\n", - ret); - goto fail_request_irq; - } - mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_txq; - } - mbox->txq = mq; - - mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_rxq; - } - mbox->rxq = mq; - mq->mbox = mbox; - - omap_mbox_enable_irq(mbox, IRQ_RX); - } - mutex_unlock(&mbox_configured_lock); - return 0; - -fail_alloc_rxq: - mbox_queue_free(mbox->txq); -fail_alloc_txq: - free_irq(mbox->irq, mbox); -fail_request_irq: - if (mbox->ops->shutdown) - mbox->ops->shutdown(mbox); - mbox->use_count--; -fail_startup: - mbox_configured--; - mutex_unlock(&mbox_configured_lock); - return ret; -} - -static void omap_mbox_fini(struct omap_mbox *mbox) -{ - mutex_lock(&mbox_configured_lock); - - if (!--mbox->use_count) { - omap_mbox_disable_irq(mbox, IRQ_RX); - free_irq(mbox->irq, mbox); - tasklet_kill(&mbox->txq->tasklet); - flush_work(&mbox->rxq->work); - mbox_queue_free(mbox->txq); - mbox_queue_free(mbox->rxq); - } - - if (likely(mbox->ops->shutdown)) { - if (!--mbox_configured) - mbox->ops->shutdown(mbox); - } - - mutex_unlock(&mbox_configured_lock); -} - -struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) -{ - struct omap_mbox *_mbox, *mbox = NULL; - int i, ret; - - if (!mboxes) - return ERR_PTR(-EINVAL); - - for (i = 0; (_mbox = mboxes[i]); i++) { - if (!strcmp(_mbox->name, name)) { - mbox = _mbox; - break; - } - } - - if (!mbox) - return ERR_PTR(-ENOENT); - - if (nb) - blocking_notifier_chain_register(&mbox->notifier, nb); - - ret = omap_mbox_startup(mbox); - if (ret) { - blocking_notifier_chain_unregister(&mbox->notifier, nb); - return ERR_PTR(-ENODEV); - } - - return mbox; -} -EXPORT_SYMBOL(omap_mbox_get); - -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb) -{ - blocking_notifier_chain_unregister(&mbox->notifier, nb); - omap_mbox_fini(mbox); -} -EXPORT_SYMBOL(omap_mbox_put); - -static struct class omap_mbox_class = { .name = "mbox", }; - -int omap_mbox_register(struct device *parent, struct omap_mbox **list) -{ - int ret; - int i; - - mboxes = list; - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) { - struct omap_mbox *mbox = mboxes[i]; - mbox->dev = device_create(&omap_mbox_class, - parent, 0, mbox, "%s", mbox->name); - if (IS_ERR(mbox->dev)) { - ret = PTR_ERR(mbox->dev); - goto err_out; - } - - BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier); - } - return 0; - -err_out: - while (i--) - device_unregister(mboxes[i]->dev); - return ret; -} -EXPORT_SYMBOL(omap_mbox_register); - -int omap_mbox_unregister(void) -{ - int i; - - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) - device_unregister(mboxes[i]->dev); - mboxes = NULL; - return 0; -} -EXPORT_SYMBOL(omap_mbox_unregister); - -static int __init omap_mbox_init(void) -{ - int err; - - err = class_register(&omap_mbox_class); - if (err) - return err; - - /* kfifo size sanity check: alignment and minimal size */ - mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); - mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, - sizeof(mbox_msg_t)); - - return 0; -} -subsys_initcall(omap_mbox_init); - -static void __exit omap_mbox_exit(void) -{ - class_unregister(&omap_mbox_class); -} -module_exit(omap_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); -MODULE_AUTHOR("Toshihiro Kobayashi"); -MODULE_AUTHOR("Hiroshi DOYU"); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e..c019b7aaf77 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa1..d9a24f605a2 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include <linux/mv643xx_eth.h> +#include <linux/platform_data/usb-ehci-orion.h> struct dsa_platform_data; struct mv_sata_platform_data; diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index ca07cb1b155..79690f2f6d3 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev) } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "failed to find registers\n"); - return -ENXIO; - } - adc->regs = devm_ioremap_resource(dev, regs); if (IS_ERR(adc->regs)) return PTR_ERR(adc->regs); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe243f7..0f9c3f431a5 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 95509d8eb14..d7e17150028 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS #define s3c_cpufreq_debugfs_call(x) x #else #define s3c_cpufreq_debugfs_call(x) NULL @@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, #define s3c2412_iotiming_set NULL #endif /* CONFIG_S3C2412_IOTIMING */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) #else #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG #define s3c_freq_iodbg(x...) printk(KERN_INFO x) #else #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, int index, size_t table_size, diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h index 80c4a809c72..85517ab962a 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -126,7 +126,7 @@ struct s3c_cpufreq_board { }; /* Things depending on frequency scaling. */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ #define __init_or_cpufreq #else #define __init_or_cpufreq __init @@ -134,7 +134,7 @@ struct s3c_cpufreq_board { /* Board functions */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); #else @@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) { return 0; } -#endif /* CONFIG_CPU_FREQ_S3C */ +#endif /* CONFIG_ARM_S3C_CPUFREQ */ diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 438b24846e7..02b66d723d1 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -66,6 +66,9 @@ uart_rd(unsigned int reg) static void putc(int ch) { + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x) #ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO static inline void arch_enable_uart_fifo(void) { - u32 fifocon = uart_rd(S3C2410_UFCON); + u32 fifocon; + + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + + fifocon = uart_rd(S3C2410_UFCON); if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { fifocon |= S3C2410_UFCON_RESETBOTH; diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bb..46e17492fd1 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index d30042e3997..13609e01f4b 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); -static int __init xen_secondary_init(unsigned int cpu) +static void __init xen_percpu_init(void *unused) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; int err; + int cpu = get_cpu(); pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); @@ -165,14 +166,10 @@ static int __init xen_secondary_init(unsigned int cpu) info.offset = offset_in_page(vcpup); err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); - if (err) { - pr_debug("register_vcpu_info failed: err=%d\n", err); - } else { - /* This cpu is using the registered vcpu info, even if - later ones fail to. */ - per_cpu(xen_vcpu, cpu) = vcpup; - } - return 0; + BUG_ON(err); + per_cpu(xen_vcpu, cpu) = vcpup; + + enable_percpu_irq(xen_events_irq, 0); } static void xen_restart(char str, const char *cmd) @@ -208,7 +205,6 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; - int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -265,19 +261,23 @@ static int __init xen_guest_init(void) sizeof(struct vcpu_info)); if (xen_vcpu_info == NULL) return -ENOMEM; - for_each_online_cpu(i) - xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) xenbus_probe(NULL); + return 0; +} +core_initcall(xen_guest_init); + +static int __init xen_pm_init(void) +{ pm_power_off = xen_power_off; arm_pm_restart = xen_restart; return 0; } -core_initcall(xen_guest_init); +subsys_initcall(xen_pm_init); static irqreturn_t xen_arm_callback(int irq, void *arg) { @@ -285,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } -static __init void xen_percpu_enable_events(void *unused) -{ - enable_percpu_irq(xen_events_irq, 0); -} - static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -303,7 +298,7 @@ static int __init xen_init_events(void) return -EINVAL; } - on_each_cpu(xen_percpu_enable_events, NULL, 0); + on_each_cpu(xen_percpu_init, NULL, 0); return 0; } |