diff options
Diffstat (limited to 'arch/arm')
299 files changed, 2377 insertions, 4274 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17ea..dfb0312f4e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622 depends on CPU_V7 help This option enables the workaround for the 743622 Cortex-A9 - (r2p0..r2p2) erratum. Under very rare conditions, a faulty + (r2p*) erratum. Under very rare conditions, a faulty optimisation in the Cortex-A9 Store Buffer may lead to data corruption. This workaround sets a specific bit in the diagnostic register of the Cortex-A9 which disables the Store Buffer diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e..3c79f85975a 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c..a1dd2ee8375 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -29,6 +29,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + cpu-offset = <0x8000>; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69..825d2957da0 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -46,11 +46,11 @@ }; serial@70006200 { - status = "disable"; + clock-frequency = <216000000>; }; serial@70006300 { - clock-frequency = <216000000>; + status = "disable"; }; serial@70006400 { @@ -60,7 +60,7 @@ sdhci@c8000000 { cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ }; sdhci@c8000200 { diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi index ec0c4e6212c..0007d3cd7dc 100644 --- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi +++ b/arch/arm/boot/dts/testcases/tests-phandle.dtsi @@ -31,6 +31,8 @@ phandle-list-bad-phandle = <12345678 0 0>; phandle-list-bad-args = <&provider2 1 0>, <&provider3 0>; + empty-property; + unterminated-string = [40 41 42 43]; }; }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c47d6199b78..f0783be1735 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -51,7 +51,6 @@ union gic_base { }; struct gic_chip_data { - unsigned int irq_offset; union gic_base dist_base; union gic_base cpu_base; #ifdef CONFIG_CPU_PM @@ -61,9 +60,7 @@ struct gic_chip_data { u32 __percpu *saved_ppi_enable; u32 __percpu *saved_ppi_conf; #endif -#ifdef CONFIG_IRQ_DOMAIN - struct irq_domain domain; -#endif + struct irq_domain *domain; unsigned int gic_irqs; #ifdef CONFIG_GIC_NON_BANKED void __iomem *(*get_base)(union gic_base *); @@ -282,7 +279,7 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) irqnr = irqstat & ~0x1c00; if (likely(irqnr > 15 && irqnr < 1021)) { - irqnr = irq_domain_to_irq(&gic->domain, irqnr); + irqnr = irq_find_mapping(gic->domain, irqnr); handle_IRQ(irqnr, regs); continue; } @@ -314,8 +311,8 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) if (gic_irq == 1023) goto out; - cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq); - if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS)) + cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); + if (unlikely(gic_irq < 32 || gic_irq > 1020)) do_bad_IRQ(cascade_irq, desc); else generic_handle_irq(cascade_irq); @@ -348,10 +345,9 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) static void __init gic_dist_init(struct gic_chip_data *gic) { - unsigned int i, irq; + unsigned int i; u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; - struct irq_domain *domain = &gic->domain; void __iomem *base = gic_data_dist_base(gic); u32 cpu = cpu_logical_map(smp_processor_id()); @@ -386,23 +382,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic) for (i = 32; i < gic_irqs; i += 32) writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); - /* - * Setup the Linux IRQ subsystem. - */ - irq_domain_for_each_irq(domain, i, irq) { - if (i < 32) { - irq_set_percpu_devid(irq); - irq_set_chip_and_handler(irq, &gic_chip, - handle_percpu_devid_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); - } else { - irq_set_chip_and_handler(irq, &gic_chip, - handle_fasteoi_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - irq_set_chip_data(irq, gic); - } - writel_relaxed(1, base + GIC_DIST_CTRL); } @@ -618,11 +597,27 @@ static void __init gic_pm_init(struct gic_chip_data *gic) } #endif -#ifdef CONFIG_OF -static int gic_irq_domain_dt_translate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, unsigned int *out_type) +static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + if (hw < 32) { + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &gic_chip, + handle_percpu_devid_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); + } else { + irq_set_chip_and_handler(irq, &gic_chip, + handle_fasteoi_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + irq_set_chip_data(irq, d->host_data); + return 0; +} + +static int gic_irq_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) { if (d->of_node != controller) return -EINVAL; @@ -639,26 +634,23 @@ static int gic_irq_domain_dt_translate(struct irq_domain *d, *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK; return 0; } -#endif const struct irq_domain_ops gic_irq_domain_ops = { -#ifdef CONFIG_OF - .dt_translate = gic_irq_domain_dt_translate, -#endif + .map = gic_irq_domain_map, + .xlate = gic_irq_domain_xlate, }; void __init gic_init_bases(unsigned int gic_nr, int irq_start, void __iomem *dist_base, void __iomem *cpu_base, - u32 percpu_offset) + u32 percpu_offset, struct device_node *node) { + irq_hw_number_t hwirq_base; struct gic_chip_data *gic; - struct irq_domain *domain; - int gic_irqs; + int gic_irqs, irq_base; BUG_ON(gic_nr >= MAX_GIC_NR); gic = &gic_data[gic_nr]; - domain = &gic->domain; #ifdef CONFIG_GIC_NON_BANKED if (percpu_offset) { /* Frankein-GIC without banked registers... */ unsigned int cpu; @@ -694,10 +686,10 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ - domain->hwirq_base = 32; + hwirq_base = 32; if (gic_nr == 0) { if ((irq_start & 31) > 0) { - domain->hwirq_base = 16; + hwirq_base = 16; if (irq_start != -1) irq_start = (irq_start & ~31) + 16; } @@ -713,17 +705,17 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, gic_irqs = 1020; gic->gic_irqs = gic_irqs; - domain->nr_irq = gic_irqs - domain->hwirq_base; - domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq, - numa_node_id()); - if (IS_ERR_VALUE(domain->irq_base)) { + gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */ + irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", irq_start); - domain->irq_base = irq_start; + irq_base = irq_start; } - domain->priv = gic; - domain->ops = &gic_irq_domain_ops; - irq_domain_add(domain); + gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base, + hwirq_base, &gic_irq_domain_ops, gic); + if (WARN_ON(!gic->domain)) + return; gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); @@ -768,7 +760,6 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) void __iomem *dist_base; u32 percpu_offset; int irq; - struct irq_domain *domain = &gic_data[gic_cnt].domain; if (WARN_ON(!node)) return -ENODEV; @@ -782,9 +773,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) percpu_offset = 0; - domain->of_node = of_node_get(node); - - gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset); + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node); if (parent) { irq = irq_of_parse_and_map(node, 0); diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13eb..dcb13494ca0 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -299,8 +299,8 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) goto err1; } - pci_add_resource(&sys->resources, &it8152_io); - pci_add_resource(&sys->resources, &it8152_mem); + pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset); if (platform_notify || platform_notify_remove) { printk(KERN_ERR "PCI: Can't use platform_notify\n"); @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047..ff3ad224482 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index dcb004a804c..7a66311f306 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -56,7 +56,7 @@ struct vic_device { u32 int_enable; u32 soft_int; u32 protect; - struct irq_domain domain; + struct irq_domain *domain; }; /* we cannot allocate memory when VICs are initially registered */ @@ -192,14 +192,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->resume_sources = resume_sources; v->irq = irq; vic_id++; - - v->domain.irq_base = irq; - v->domain.nr_irq = 32; -#ifdef CONFIG_OF_IRQ - v->domain.of_node = of_node_get(node); -#endif /* CONFIG_OF */ - v->domain.ops = &irq_domain_simple_ops; - irq_domain_add(&v->domain); + v->domain = irq_domain_add_legacy(node, 32, irq, 0, + &irq_domain_simple_ops, v); } static void vic_ack_irq(struct irq_data *d) @@ -348,7 +342,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_register(base, irq_start, 0, node); } -static void __init __vic_init(void __iomem *base, unsigned int irq_start, +void __init __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node) { @@ -444,7 +438,7 @@ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); while (stat) { irq = ffs(stat) - 1; - handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs); + handle_IRQ(irq_find_mapping(vic->domain, irq), regs); stat &= ~(1 << irq); handled = 1; } diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46d..23371b17b23 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 4bdfe001869..4b1ce6cd477 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -39,7 +39,7 @@ struct device_node; extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, - u32 offset); + u32 offset, struct device_node *); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); void gic_handle_irq(struct pt_regs *regs); @@ -49,7 +49,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); static inline void gic_init(unsigned int nr, int start, void __iomem *dist , void __iomem *cpu) { - gic_init_bases(nr, start, dist, cpu, 0); + gic_init_bases(nr, start, dist, cpu, 0, NULL); } #endif diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca..c1821385abf 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index f42ebd61959..e14af1a1a32 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -47,6 +47,8 @@ struct device_node; struct pt_regs; +void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, + u32 resume_sources, struct device_node *node); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); int vic_of_init(struct device_node *node, struct device_node *parent); void vic_handle_irq(struct pt_regs *regs); diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index a4edd19dd3d..8c5e828f484 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -57,7 +57,7 @@ static inline void *kmap_high_get(struct page *page) #ifdef CONFIG_HIGHMEM extern void *kmap(struct page *page); extern void kunmap(struct page *page); -extern void *__kmap_atomic(struct page *page); +extern void *kmap_atomic(struct page *page); extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); extern struct page *kmap_atomic_to_page(const void *ptr); diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index da337ba57ff..a98a2e112fa 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -57,14 +57,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - /* * Dummy implementation; always return 0. */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 99cfe360798..7523340afb8 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,10 +12,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* ARM performance counters start from 1 (in the cp15 accesses) so use the - * same indexes here for consistency. */ -#define PERF_EVENT_INDEX_OFFSET 1 - /* ARM perf PMU IDs for use by internal perf clients. */ enum arm_perf_pmu_ids { ARM_PERF_PMU_ID_XSCALE1 = 0, diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index ffc0e85775b..7ec60d6075b 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -79,7 +79,6 @@ extern unsigned int kobjsize(const void *objp); * No page table caches to initialise. */ #define pgtable_cache_init() do { } while (0) -#define io_remap_page_range remap_page_range #define io_remap_pfn_range remap_pfn_range diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b5a5be2536c..90114faa9f3 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow); + int idx); int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613..cb8d638924f 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h index dec6f9afb3c..6433cadb6ed 100644 --- a/arch/arm/include/asm/socket.h +++ b/arch/arm/include/asm/socket.h @@ -64,5 +64,9 @@ #define SO_WIFI_STATUS 41 #define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 #endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index f58ba358990..632df9a66f8 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -16,7 +16,6 @@ #include <asm/mach/pci.h> static int debug_pci; -static int use_firmware; /* * We can't use pci_find_device() here since we are @@ -295,28 +294,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev) } /* - * Adjust the device resources from bus-centric to Linux-centric. - */ -static void __devinit -pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev) -{ - resource_size_t offset; - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (dev->resource[i].start == 0) - continue; - if (dev->resource[i].flags & IORESOURCE_MEM) - offset = root->mem_offset; - else - offset = root->io_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; - } -} - -/* * pcibios_fixup_bus - Called after each bus is probed, * but before its children are examined. */ @@ -333,8 +310,6 @@ void pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { u16 status; - pdev_fixup_device_resources(root, dev); - pci_read_config_word(dev, PCI_STATUS, &status); /* @@ -400,43 +375,6 @@ EXPORT_SYMBOL(pcibios_fixup_bus); #endif /* - * Convert from Linux-centric to bus-centric addresses for bridge devices. - */ -void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_sys_data *root = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = root->io_offset; - if (res->flags & IORESOURCE_MEM) - offset = root->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} -EXPORT_SYMBOL(pcibios_resource_to_bus); - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_sys_data *root = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = root->io_offset; - if (res->flags & IORESOURCE_MEM) - offset = root->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} -EXPORT_SYMBOL(pcibios_bus_to_resource); - -/* * Swizzle the device pin each time we cross a bridge. * This might update pin and returns the slot number. */ @@ -497,10 +435,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw) if (ret > 0) { if (list_empty(&sys->resources)) { - pci_add_resource(&sys->resources, - &ioport_resource); - pci_add_resource(&sys->resources, - &iomem_resource); + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &iomem_resource, sys->mem_offset); } sys->bus = hw->scan(nr, sys); @@ -525,6 +463,7 @@ void __init pci_common_init(struct hw_pci *hw) INIT_LIST_HEAD(&hw->buses); + pci_add_flags(PCI_REASSIGN_ALL_RSRC); if (hw->preinit) hw->preinit(); pcibios_init_hw(hw); @@ -536,7 +475,7 @@ void __init pci_common_init(struct hw_pci *hw) list_for_each_entry(sys, &hw->buses, node) { struct pci_bus *bus = sys->bus; - if (!use_firmware) { + if (!pci_has_flag(PCI_PROBE_ONLY)) { /* * Size the bridge windows. */ @@ -573,7 +512,7 @@ char * __init pcibios_setup(char *str) debug_pci = 1; return NULL; } else if (!strcmp(str, "firmware")) { - use_firmware = 1; + pci_add_flags(PCI_PROBE_ONLY); return NULL; } return str; diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 4dd0edab6a6..1651d495074 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma.vm_flags = VM_EXEC; vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5bb91bf3d47..8a89d3b7626 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event, u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow) + int idx) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; @@ -193,13 +193,7 @@ again: new_raw_count) != prev_raw_count) goto again; - new_raw_count &= armpmu->max_period; - prev_raw_count &= armpmu->max_period; - - if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; - else - delta = new_raw_count - prev_raw_count; + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); } static void @@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event) hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } @@ -539,6 +539,10 @@ static int armpmu_event_init(struct perf_event *event) int err = 0; atomic_t *active_events = &armpmu->active_events; + /* does not support taken branch sampling */ + if (has_branch_stack(event)) + return -EOPNOTSUPP; + if (armpmu->map_event(event) == -ENOENT) return -ENOENT; @@ -680,6 +684,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu) } /* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit pmu_cpu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata pmu_cpu_notifier = { + .notifier_call = pmu_cpu_notify, +}; + +/* * CPU PMU identification and registration. */ static int __init @@ -730,6 +756,7 @@ init_hw_perf_events(void) pr_info("enabled with %s PMU driver, %d counters available\n", cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&pmu_cpu_notifier); armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 533be9930ec..b78af0cc6ef 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int counter_is_active(unsigned long pmcr, int idx) -{ - unsigned long mask = 0; - if (idx == ARMV6_CYCLE_COUNTER) - mask = ARMV6_PMCR_CCOUNT_IEN; - else if (idx == ARMV6_COUNTER0) - mask = ARMV6_PMCR_COUNT0_IEN; - else if (idx == ARMV6_COUNTER1) - mask = ARMV6_PMCR_COUNT1_IEN; - - if (mask) - return pmcr & mask; - - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return 0; -} - static irqreturn_t armv6pmu_handle_irq(int irq_num, void *dev) @@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num, struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!counter_is_active(pmcr, idx)) + /* Ignore if we don't have an event. */ + if (!event) continue; /* @@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 6933244c68f..4d7095af2ab 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx) counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); + isb(); + /* Clear the overflow flag in case an interrupt is pending. */ + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); + isb(); + return idx; } @@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + /* Ignore if we don't have an event. */ + if (!event) + continue; + /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 3b99d826982..71a21e6712f 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + if (!event) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { - unsigned long flags, ien, evtsel; + unsigned long flags, ien, evtsel, of_flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); @@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) switch (idx) { case XSCALE_CYCLE_COUNTER: ien &= ~XSCALE2_CCOUNT_INT_EN; + of_flags = XSCALE2_CCOUNT_OVERFLOW; break; case XSCALE_COUNTER0: ien &= ~XSCALE2_COUNT0_INT_EN; evtsel &= ~XSCALE2_COUNT0_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + of_flags = XSCALE2_COUNT0_OVERFLOW; break; case XSCALE_COUNTER1: ien &= ~XSCALE2_COUNT1_INT_EN; evtsel &= ~XSCALE2_COUNT1_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + of_flags = XSCALE2_COUNT1_OVERFLOW; break; case XSCALE_COUNTER2: ien &= ~XSCALE2_COUNT2_INT_EN; evtsel &= ~XSCALE2_COUNT2_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + of_flags = XSCALE2_COUNT2_OVERFLOW; break; case XSCALE_COUNTER3: ien &= ~XSCALE2_COUNT3_INT_EN; evtsel &= ~XSCALE2_COUNT3_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + of_flags = XSCALE2_COUNT3_OVERFLOW; break; default: WARN_ONCE(1, "invalid counter number (%d)\n", idx); @@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); + xscale2pmu_write_overflow_flags(of_flags); raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 971d65c253a..219e4efee1a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -239,9 +239,7 @@ void cpu_idle(void) leds_event(led_idle_end); rcu_idle_exit(); tick_nohz_idle_exit(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + schedule_preempt_disabled(); } } @@ -535,8 +533,7 @@ int vectors_user_mapping(void) struct mm_struct *mm = current->mm; return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC | - VM_ALWAYSDUMP | VM_RESERVED, + VM_MAYREAD | VM_MAYEXEC | VM_RESERVED, NULL); } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870ff0ac..ede6443c34d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index cdeb727527d..d616ed51e7a 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -295,13 +295,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) */ percpu_timer_setup(); - while (!cpu_active(cpu)) - cpu_relax(); - - /* - * cpu_active bit is set, so it's safe to enalbe interrupts - * now. - */ local_irq_enable(); local_fiq_enable(); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b..7a79b24597b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a57270250..f84dfe67724 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) { struct thread_info *thread = current_thread_info(); int ret; + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; oops_enter(); @@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) console_verbose(); bust_spinlocks(1); if (!user_mode(regs)) - report_bug(regs->ARM_pc, regs); + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1e19691e040..43a31fb0631 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -10,6 +10,7 @@ #include <asm/page.h> #define PROC_INFO \ + . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b09..97676bdae99 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b..5a24f0b4554 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} * CF/IDE * -------------------------------------------------------------------- */ -#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ - defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (data->flags & AT91_CF_TRUE_IDE) #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) pdev->name = "pata_at91"; -#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - pdev->name = "at91_ide"; #else -#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" #endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3..1e28bed8f42 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b278702..366a7765635 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc..96e2adcd5a8 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -38,10 +38,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce978..9be71c11d0f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa64..175e1fdd9fe 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -18,6 +18,35 @@ #include <mach/cpu.h> +#ifndef __ASSEMBLY__ +struct sam9_smc_config { + /* Setup register */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse register */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Cycle register */ + u16 read_cycle; + u16 write_cycle; + + /* Mode register */ + u32 mode; + u8 tdf_cycles:4; +}; + +extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); +#endif + #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 8294783b679..99a0a1d2b7d 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -2,6 +2,7 @@ * linux/arch/arm/mach-at91/sam9_smc.c * * Copyright (C) 2008 Andrew Victor + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +23,22 @@ static void __iomem *smc_base_addr[2]; -static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) +static void sam9_smc_cs_write_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void sam9_smc_write_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_configure(void __iomem *base, + struct sam9_smc_config *config) { /* Setup register */ @@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con base + AT91_SMC_CYCLE); /* Mode register */ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); + sam9_smc_cs_write_mode(base, config); } -void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +void sam9_smc_configure(int id, int cs, + struct sam9_smc_config *config) { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +static void sam9_smc_cs_read_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val = __raw_readl(base + AT91_SMC_MODE); + + config->mode = (val & ~AT91_SMC_NWECYCLE); + config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; +} + +void sam9_smc_read_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_read(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val; + + /* Setup register */ + val = __raw_readl(base + AT91_SMC_SETUP); + + config->nwe_setup = val & AT91_SMC_NWESETUP; + config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; + config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; + config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; + + /* Pulse register */ + val = __raw_readl(base + AT91_SMC_PULSE); + + config->nwe_setup = val & AT91_SMC_NWEPULSE; + config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; + config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; + config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; + + /* Cycle register */ + val = __raw_readl(base + AT91_SMC_CYCLE); + + config->write_cycle = val & AT91_SMC_NWECYCLE; + config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; + + /* Mode register */ + sam9_smc_cs_read_mode(base, config); +} + +void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) +{ + sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); +} + void __init at91sam9_ioremap_smc(int id, u32 addr) { if (id > 1) { diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index 039c5ce17ae..3e52dcd4a59 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h @@ -8,27 +8,4 @@ * published by the Free Software Foundation. */ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1024396797e..e5fd241fccd 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -35,7 +35,6 @@ #include <linux/pfn.h> #include <linux/atomic.h> -#include <linux/sched.h> #include <mach/dma.h> /* ---- Public Variables ------------------------------------------------- */ diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index e159d69967c..79d001f831e 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -155,8 +155,8 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) BUG_ON(request_resource(&iomem_resource, res_io) || request_resource(&iomem_resource, res_mem)); - pci_add_resource(&sys->resources, res_io); - pci_add_resource(&sys->resources, res_mem); + pci_add_resource_offset(&sys->resources, res_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index dd1429ae640..bda7aca04ca 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <linux/irq.h> #include <plat/time.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); } /***************************************************************************** diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 52e96d397ba..48a032005ea 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -69,7 +69,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -88,7 +88,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a679..b5c1dae8327 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -817,23 +817,12 @@ void __init ep93xx_register_i2s(void) #define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ EP93XX_SYSCON_I2SCLKDIV_SPOL) -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +int ep93xx_i2s_acquire(void) { unsigned val; - /* Sanity check */ - if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) - return -EINVAL; - if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) - return -EINVAL; - - /* Must have only one of I2SONSSP/I2SONAC97 set */ - if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == - (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) - return -EINVAL; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); - ep93xx_devcfg_set_bits(i2s_pins); + ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, + EP93XX_SYSCON_DEVCFG_I2S_MASK); /* * This is potentially racy with the clock api for i2s_mclk, sclk and @@ -843,7 +832,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) */ val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); val &= ~EP93XX_I2SCLKDIV_MASK; - val |= i2s_config; + val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); return 0; diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index d4c934931f9..ad63d4be693 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -59,7 +59,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config); +int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043..d67d0b4feb6 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -32,7 +32,9 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -153,7 +155,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, { I2C_BOARD_INFO("pca9539", 0x74), .platform_data = &pca953x_74_gpio_data, - .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), }, { I2C_BOARD_INFO("pca9539", 0x75), .platform_data = &pca953x_75_gpio_data, @@ -348,6 +349,8 @@ static void __init vision_init_machine(void) "pca9539:74")) pr_warn("cannot request interrupt gpio for pca9539:74\n"); + vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, @@ -359,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, .restart = ep93xx_restart, diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5d602f68a0e..dfad6538b27 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -34,6 +34,7 @@ config CPU_EXYNOS4210 select ARM_CPU_SUSPEND if PM select S5P_PM if PM select S5P_SLEEP if PM + select PM_GENERIC_DOMAINS help Enable EXYNOS4210 CPU support @@ -74,11 +75,6 @@ config EXYNOS4_SETUP_FIMD0 help Common setup code for FIMD0. -config EXYNOS4_DEV_PD - bool - help - Compile in platform device definitions for Power Domain - config EXYNOS4_DEV_SYSMMU bool help @@ -195,7 +191,6 @@ config MACH_SMDKV310 select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_DEV_SYSMMU @@ -243,7 +238,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 @@ -277,7 +271,6 @@ config MACH_NURI select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -310,7 +303,6 @@ config MACH_ORIGEN select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_PD select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 5fc202cdfdb..d9191f9a7af 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o @@ -45,7 +46,6 @@ obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249..13312ccb2d9 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d10..48af28566fa 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e9000..187287aa57a 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index c59e1887100..6de298c5d2d 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -402,7 +402,7 @@ void __init exynos4_init_irq(void) gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; if (!of_have_populated_dt()) - gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset); + gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); #ifdef CONFIG_OF else of_irq_init(exynos4_dt_irq_match); diff --git a/arch/arm/mach-exynos/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c deleted file mode 100644 index 3273f25d6a7..00000000000 --- a/arch/arm/mach-exynos/dev-pd.c +++ /dev/null @@ -1,139 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-pd.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Power Domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <mach/regs-pmu.h> - -#include <plat/pd.h> - -static int exynos4_pd_enable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) - != S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s enable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -static int exynos4_pd_disable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(0, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s disable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -struct platform_device exynos4_device_pd[] = { - { - .name = "samsung-pd", - .id = 0, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_MFC_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 1, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_G3D_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 2, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_LCD0_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 3, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_LCD1_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 4, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_TV_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 5, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_CAM_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 6, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = exynos4_pd_enable, - .disable = exynos4_pd_disable, - .base = S5P_PMU_GPS_CONF, - }, - }, - }, -}; diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d6..e6b02fdf1b0 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,11 +15,13 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> + +#include "common.h" /* * The following lookup table is used to override device names when devices @@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { static void __init exynos4210_dt_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } @@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .init_irq = exynos4_init_irq, .map_io = exynos4210_dt_map_io, + .handle_irq = gic_handle_irq, .init_machine = exynos4210_dt_machine_init, .timer = &exynos4_timer, .dt_compat = exynos4210_dt_compat, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b895ec03110..aa37179d776 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { .lower_margin = 1, .hsync_len = 48, .vsync_len = 3, - .xres = 1280, - .yres = 800, + .xres = 1024, + .yres = 600, .refresh = 60, }, .max_bpp = 24, .default_bpp = 16, - .virtual_x = 1280, - .virtual_y = 800, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata nuri_fb_pdata __initdata = { @@ -1263,9 +1263,6 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_CAM], &s5p_device_fimc_md, /* NURI Devices */ @@ -1315,14 +1312,6 @@ static void __init nuri_machine_init(void) /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(NURI, "NURI") diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 0679b8ad2d1..fa5c4a59b0a 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -621,13 +621,6 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_r, &s5p_device_mixer, &exynos4_device_ohci, - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_GPS], - &exynos4_device_pd[PD_MFC], &origen_device_gpiokeys, &origen_lcd_hv070wsa, }; @@ -695,13 +688,6 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; - - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); } diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index b2c5557f50e..5258b856367 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -277,13 +277,6 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_GPS], &exynos4_device_spdif, &exynos4_device_sysmmu, &samsung_asoc_dma, @@ -336,10 +329,6 @@ static void s5p_tv_setup(void) WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); - - /* setup dependencies between TV devices */ - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; } static void __init smdkv310_map_io(void) @@ -379,7 +368,6 @@ static void __init smdkv310_machine_init(void) clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(SMDKV310, "SMDKV310") diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d..b2d495b3109 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <linux/fb.h> #include <linux/mfd/max8998.h> #include <linux/regulator/machine.h> @@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = { .threshold = 0x28, .voltage = 2800000, /* 2.8V */ .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct i2c_board_info i2c3_devs[] __initdata = { @@ -910,7 +912,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, - .clk_frequency = 21600000UL, + .clk_frequency = 24000000UL, .csi_data_align = 32, }, }; @@ -969,7 +971,6 @@ static struct platform_device *universal_devices[] __initdata = { &s3c_device_i2c5, &s5p_device_i2c_hdmiphy, &hdmi_fixed_voltage, - &exynos4_device_pd[PD_TV], &s5p_device_hdmi, &s5p_device_sdo, &s5p_device_mixer, @@ -982,9 +983,6 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_CAM], &cam_i_core_fixed_reg_dev, &cam_s_if_fixed_reg_dev, &s5p_device_fimc_md, @@ -1003,10 +1001,6 @@ void s5p_tv_setup(void) gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); - - /* setup dependencies between TV devices */ - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; } static void __init universal_reserve(void) @@ -1040,15 +1034,6 @@ static void __init universal_machine_init(void) /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); - - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; - - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7b..e1901305177 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct device *dev) +static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c new file mode 100644 index 00000000000..0b04af2b13c --- /dev/null +++ b/arch/arm/mach-exynos/pm_domains.c @@ -0,0 +1,195 @@ +/* + * Exynos Generic power domain support. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Implementation of Exynos specific power domain control which is used in + * conjunction with runtime-pm. Support for both device-tree and non-device-tree + * based power domain support is included. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/io.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/pm_domain.h> +#include <linux/delay.h> +#include <linux/of_address.h> + +#include <mach/regs-pmu.h> +#include <plat/devs.h> + +/* + * Exynos specific wrapper around the generic power domain + */ +struct exynos_pm_domain { + void __iomem *base; + char const *name; + bool is_off; + struct generic_pm_domain pd; +}; + +static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) +{ + struct exynos_pm_domain *pd; + void __iomem *base; + u32 timeout, pwr; + char *op; + + pd = container_of(domain, struct exynos_pm_domain, pd); + base = pd->base; + + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; + __raw_writel(pwr, base); + + /* Wait max 1ms */ + timeout = 10; + + while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) { + if (!timeout) { + op = (power_on) ? "enable" : "disable"; + pr_err("Power domain %s %s failed\n", domain->name, op); + return -ETIMEDOUT; + } + timeout--; + cpu_relax(); + usleep_range(80, 100); + } + return 0; +} + +static int exynos_pd_power_on(struct generic_pm_domain *domain) +{ + return exynos_pd_power(domain, true); +} + +static int exynos_pd_power_off(struct generic_pm_domain *domain) +{ + return exynos_pd_power(domain, false); +} + +#define EXYNOS_GPD(PD, BASE, NAME) \ +static struct exynos_pm_domain PD = { \ + .base = (void __iomem *)BASE, \ + .name = NAME, \ + .pd = { \ + .power_off = exynos_pd_power_off, \ + .power_on = exynos_pd_power_on, \ + }, \ +} + +#ifdef CONFIG_OF +static __init int exynos_pm_dt_parse_domains(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct exynos_pm_domain *pd; + + pd = kzalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) { + pr_err("%s: failed to allocate memory for domain\n", + __func__); + return -ENOMEM; + } + + if (of_get_property(np, "samsung,exynos4210-pd-off", NULL)) + pd->is_off = true; + pd->name = np->name; + pd->base = of_iomap(np, 0); + pd->pd.power_off = exynos_pd_power_off; + pd->pd.power_on = exynos_pd_power_on; + pd->pd.of_node = np; + pm_genpd_init(&pd->pd, NULL, false); + } + return 0; +} +#else +static __init int exynos_pm_dt_parse_domains(void) +{ + return 0; +} +#endif /* CONFIG_OF */ + +static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, + struct exynos_pm_domain *pd) +{ + if (pdev->dev.bus) { + if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + pr_info("%s: error in adding %s device to %s power" + "domain\n", __func__, dev_name(&pdev->dev), + pd->name); + } +} + +EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc"); +EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d"); +EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0"); +EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1"); +EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv"); +EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam"); +EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps"); + +static struct exynos_pm_domain *exynos4_pm_domains[] = { + &exynos4_pd_mfc, + &exynos4_pd_g3d, + &exynos4_pd_lcd0, + &exynos4_pd_lcd1, + &exynos4_pd_tv, + &exynos4_pd_cam, + &exynos4_pd_gps, +}; + +static __init int exynos4_pm_init_power_domain(void) +{ + int idx; + + if (of_have_populated_dt()) + return exynos_pm_dt_parse_domains(); + + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) + pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, + exynos4_pm_domains[idx]->is_off); + +#ifdef CONFIG_S5P_DEV_FIMD0 + exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); +#endif +#ifdef CONFIG_S5P_DEV_TV + exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv); + exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv); +#endif +#ifdef CONFIG_S5P_DEV_MFC + exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc); +#endif +#ifdef CONFIG_S5P_DEV_FIMC0 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC1 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC2 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_FIMC3 + exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_CSIS0 + exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam); +#endif +#ifdef CONFIG_S5P_DEV_CSIS1 + exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); +#endif + return 0; +} +arch_initcall(exynos4_pm_init_power_domain); + +static __init int exynos_pm_late_initcall(void) +{ + pm_genpd_poweroff_unused(); + return 0; +} +late_initcall(exynos_pm_late_initcall); diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f685650c25d..3194d3f7350 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -275,11 +275,13 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) allocate_resource(&iomem_resource, &res[0], 0x40000000, 0x80000000, 0xffffffff, 0x40000000, NULL, NULL); - pci_add_resource(&sys->resources, &ioport_resource); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); sys->mem_offset = DC21285_PCI_MEM; + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + return 1; } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4defb97bbfc..3919fba52ac 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -46,7 +46,6 @@ config SOC_IMX21 bool select MACH_MX21 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -55,7 +54,6 @@ config SOC_IMX25 bool select ARCH_MX25 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -63,7 +61,6 @@ config SOC_IMX27 bool select MACH_MX27 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -72,7 +69,6 @@ config SOC_IMX31 bool select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA - select ARCH_MXC_AUDMUX_V2 select MXC_AVIC select SMP_ON_UP if SMP @@ -80,7 +76,6 @@ config SOC_IMX35 bool select CPU_V6 select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP @@ -89,7 +84,6 @@ config SOC_IMX5 select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ select ARCH_MX5 bool diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 88fe00a146e..dc2d7a511d9 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -661,7 +661,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) - _REGISTER_CLOCK(NULL, "emma", emma_clk) + _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 2f727d7c380..28537a5d904 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -50,6 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) +#define imx27_add_mx2_emmaprp(pdata) \ + imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5db3e1463af..5f2f91d1798 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -32,7 +32,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/hardware.h> -#include <mach/audmux.h> #include "devices-imx27.h" @@ -306,25 +305,6 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - /* SSI unit master I2S codec connected to SSI_PINS_4*/ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_TCLKDIR | - MXC_AUDMUX_V1_PCR_RFSDIR | - MXC_AUDMUX_V1_PCR_RCLKDIR | - MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) - ); - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) - ); -#endif - imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); #if !defined(MACH_EUKREA_CPUIMX27_USEUART4) diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b98..aaa592fdb9c 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c @@ -37,7 +37,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/audmux.h> #include "devices-imx51.h" diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 66e8726253f..2cf603e11c4 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -31,7 +31,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/mx25.h> -#include <mach/audmux.h> #include "devices-imx25.h" @@ -241,22 +240,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD5*/ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(4) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(4), - MXC_AUDMUX_V2_PDCR_RXDSEL(4) - ); - mxc_audmux_v2_configure_port(4, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx25_add_imx_uart1(&uart_pdata); imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 0f0af02b318..fd8bf8a425a 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -38,7 +38,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -252,22 +251,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD4 */ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(3), - MXC_AUDMUX_V2_PDCR_RXDSEL(3) - ); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx35_add_imx_uart1(&uart_pdata); imx35_add_ipu_core(&mx3_ipu_data); imx35_add_mx3_sdc_fb(&mx3fb_pdata); diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908..1e03ef42faa 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np, static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; gpio_irq_base -= 32; - irq_domain_add_simple(np, gpio_irq_base); + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); return 0; } diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e6867..fd5be0f20fb 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -51,7 +51,7 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -61,7 +61,7 @@ static int __init imx53_gpio_add_irq_domain(struct device_node *np, static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; gpio_irq_base -= 32; - irq_domain_add_simple(np, gpio_irq_base); + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); return 0; } diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index c2766ae02b4..428459fbca4 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -263,6 +263,7 @@ static void __init visstrim_m10_board_init(void) imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); } static void __init visstrim_m10_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index c2572810691..6075d4d62dd 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -97,7 +97,8 @@ static int __init imx6q_gpio_add_irq_domain(struct device_node *np, static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; gpio_irq_base -= 32; - irq_domain_add_simple(np, gpio_irq_base); + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index d3b9c6b5edd..541152e450c 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/audmux.h> #include <mach/irqs.h> #include <mach/ulpi.h> @@ -359,18 +358,6 @@ static void __init pca100_init(void) imx27_soc_init(); - /* SSI unit */ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(3) | - MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ - MXC_AUDMUX_V1_PCR_RXDSEL(3)); - mxc_audmux_v1_configure_port(3, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(0) | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_RXDSEL(0)); - ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index e48854b9d99..5fddf94cc96 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -32,6 +32,8 @@ #include <linux/usb/ulpi.h> #include <linux/gfp.h> #include <linux/memblock.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <media/soc_camera.h> @@ -570,6 +572,11 @@ static int __init pcm037_otg_mode(char *options) } __setup("otg_mode=", pcm037_otg_mode); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Board specific initialization. */ @@ -579,6 +586,8 @@ static void __init pcm037_init(void) imx31_soc_init(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 06dc106519a..237474fcca2 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -37,7 +37,6 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/ulpi.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -362,18 +361,6 @@ static void __init pcm043_init(void) mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TFSEL(0) | - MXC_AUDMUX_V2_PTCR_TFSDIR, - MXC_AUDMUX_V2_PDCR_RXDSEL(0)); - - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TCSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ - MXC_AUDMUX_V2_PDCR_RXDSEL(3)); - imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx2_wdt(NULL); diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 3f05dfebacc..14d540edfd1 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -75,6 +75,10 @@ void __init mx21_init_irq(void) mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); } +static const struct resource imx21_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx21_soc_init(void) { mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); @@ -85,4 +89,6 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); imx_add_imx_dma(); + platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, + ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index cc4d152bd9b..153b457acdc 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -83,6 +83,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = { .script_addrs = &imx25_sdma_script, }; +static const struct resource imx25_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx25_soc_init(void) { /* i.mx25 has the i.mx31 type gpio */ @@ -93,4 +97,7 @@ void __init imx25_soc_init(void) /* i.mx25 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); + /* i.mx25 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res, + ARRAY_SIZE(imx25_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 96dd1f5ea7b..8cb3f5e3e56 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -75,6 +75,10 @@ void __init mx27_init_irq(void) mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } +static const struct resource imx27_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx27_soc_init(void) { /* i.mx27 has the i.mx21 type gpio */ @@ -86,4 +90,7 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); imx_add_imx_dma(); + /* imx27 has the imx21 type audmux */ + platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, + ARRAY_SIZE(imx27_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7..2530c151b7b 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -158,6 +158,10 @@ static struct sdma_platform_data imx31_sdma_pdata __initdata = { .script_addrs = &imx31_to2_sdma_script, }; +static const struct resource imx31_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; @@ -175,6 +179,8 @@ void __init imx31_soc_init(void) } imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); + platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, + ARRAY_SIZE(imx31_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -241,6 +247,10 @@ static struct sdma_platform_data imx35_sdma_pdata __initdata = { .script_addrs = &imx35_to2_sdma_script, }; +static const struct resource imx35_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx35_soc_init(void) { int to_version = mx35_revision() >> 4; @@ -259,5 +269,8 @@ void __init imx35_soc_init(void) } imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + /* i.mx35 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res, + ARRAY_SIZE(imx35_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea381..90d7880bb37 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -170,6 +170,18 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = { .script_addrs = &imx53_sdma_script, }; +static const struct resource imx50_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx51_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx53_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx50_soc_init(void) { /* i.mx50 has the i.mx31 type gpio */ @@ -179,6 +191,10 @@ void __init imx50_soc_init(void) mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); + + /* i.mx50 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, + ARRAY_SIZE(imx50_audmux_res)); } void __init imx51_soc_init(void) @@ -191,6 +207,9 @@ void __init imx51_soc_init(void) /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); + /* i.mx51 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res, + ARRAY_SIZE(imx51_audmux_res)); } void __init imx53_soc_init(void) @@ -206,4 +225,7 @@ void __init imx53_soc_init(void) /* i.mx53 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); + /* i.mx53 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, + ARRAY_SIZE(imx53_audmux_res)); } diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 0aa25364360..cc285e50728 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -158,7 +158,7 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev) #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) #define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) -static int devboard_isp1105_init(struct otg_transceiver *otg) +static int devboard_isp1105_init(struct usb_phy *otg) { int ret = gpio_request(USBH1_MODE, "usbh1-mode"); if (ret) @@ -177,7 +177,7 @@ static int devboard_isp1105_init(struct otg_transceiver *otg) } -static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) +static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on) { if (on) gpio_set_value(USBH1_VBUSEN_B, 0); @@ -194,18 +194,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = { static int __init devboard_usbh1_init(void) { - struct otg_transceiver *otg; + struct usb_phy *phy; struct platform_device *pdev; - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) return -ENOMEM; - otg->label = "ISP1105"; - otg->init = devboard_isp1105_init; - otg->set_vbus = devboard_isp1105_set_vbus; + phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!phy->otg) { + kfree(phy); + return -ENOMEM; + } + + phy->label = "ISP1105"; + phy->init = devboard_isp1105_init; + phy->otg->set_vbus = devboard_isp1105_set_vbus; - usbh1_pdata.otg = otg; + usbh1_pdata.otg = phy; pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); if (IS_ERR(pdev)) diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index bb639cbda4e..135c90e3a45 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -272,7 +272,7 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev) #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) #define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) -static int marxbot_isp1105_init(struct otg_transceiver *otg) +static int marxbot_isp1105_init(struct usb_phy *otg) { int ret = gpio_request(USBH1_MODE, "usbh1-mode"); if (ret) @@ -291,7 +291,7 @@ static int marxbot_isp1105_init(struct otg_transceiver *otg) } -static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) +static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on) { if (on) gpio_set_value(USBH1_VBUSEN_B, 0); @@ -308,18 +308,24 @@ static struct mxc_usbh_platform_data usbh1_pdata __initdata = { static int __init marxbot_usbh1_init(void) { - struct otg_transceiver *otg; + struct usb_phy *phy; struct platform_device *pdev; - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) return -ENOMEM; - otg->label = "ISP1105"; - otg->init = marxbot_isp1105_init; - otg->set_vbus = marxbot_isp1105_set_vbus; + phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!phy->otg) { + kfree(phy); + return -ENOMEM; + } + + phy->label = "ISP1105"; + phy->init = marxbot_isp1105_init; + phy->otg->set_vbus = marxbot_isp1105_set_vbus; - usbh1_pdata.otg = otg; + usbh1_pdata.otg = phy; pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); if (IS_ERR(pdev)) diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 3c82566acec..015be770c1d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -378,9 +378,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource(&sys->resources, &ioport_resource); - pci_add_resource(&sys->resources, &non_mem); - pci_add_resource(&sys->resources, &pre_mem); + pci_add_resource_offset(&sys->resources, + &ioport_resource, sys->io_offset); + pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index b8f5a873651..861cb12ef43 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -1084,8 +1084,8 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index f53e911ec94..d519944653a 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -134,11 +134,11 @@ static void ixdp2400_pci_postinit(void) if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } else { dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2x00_slave_pci_postinit(); diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index a2e7c393e74..b415febd202 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -262,14 +262,14 @@ int __init ixdp2800_pci_init(void) pci_common_init(&ixdp2800_pci); if (ixdp2x00_master_npu()) { dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); ixdp2800_master_enable_slave(); ixdp2800_master_wait_for_slave_bus_scan(); } else { dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 634b6c852f6..dd983829906 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -239,12 +239,12 @@ void ixdp2x00_slave_pci_postinit(void) * Remove PMC device is there is one */ if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); - pci_remove_bus_device(dev); + pci_stop_and_remove_bus_device(dev); pci_dev_put(dev); } diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 626fda435aa..49c36f3cd60 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -243,8 +243,10 @@ int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - pci_add_resource(&sys->resources, &ixp2000_pci_io_space); - pci_add_resource(&sys->resources, &ixp2000_pci_mem_space); + pci_add_resource_offset(&sys->resources, + &ixp2000_pci_io_space, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &ixp2000_pci_mem_space, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 25b5c462cea..3cbbd3208fa 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -281,8 +281,10 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - pci_add_resource(&sys->resources, &ixp23xx_pci_io_space); - pci_add_resource(&sys->resources, &ixp23xx_pci_mem_space); + pci_add_resource_offset(&sys->resources, + &ixp23xx_pci_io_space, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &ixp23xx_pci_mem_space, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 5eff15f24bc..8508882b13f 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -472,8 +472,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); platform_notify = ixp4xx_pci_platform_notify; platform_notify_remove = ixp4xx_pci_platform_notify_remove; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index cc15426787b..77d4852e19f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -27,6 +27,7 @@ #include <plat/cache-feroceon-l2.h> #include <plat/mvsdio.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/time.h> #include <plat/addr-map.h> @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); } diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e8fda45c073..d5a0d1da2e0 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -31,314 +31,314 @@ #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 01f8c899288..7e99c3f340f 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -83,6 +83,11 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct platform_device openrd_client_audio_device = { + .name = "openrd-client-audio", + .id = -1, +}; + static int __initdata uart1; static int __init sd_uart_selection(char *str) @@ -172,6 +177,7 @@ static void __init openrd_init(void) kirkwood_i2c_init(); if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { + platform_device_register(&openrd_client_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index a066a6d8d9d..f56a0118c1b 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -198,9 +198,9 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe%d Memory resource failed\n", index); - pci_add_resource(&sys->resources, &pp->res[0]); - pci_add_resource(&sys->resources, &pp->res[1]); sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); /* * Generic PCIe unit setup. diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index 966b2b3bb81..f9d2a11b7f9 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -106,6 +106,11 @@ static struct platform_device hp_t5325_button_device = { } }; +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + static unsigned int hp_t5325_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_SPI_MOSI, @@ -179,6 +184,7 @@ static void __init hp_t5325_init(void) kirkwood_sata_init(&hp_t5325_sata_data); kirkwood_ehci_init(); platform_device_register(&hp_t5325_button_device); + platform_device_register(&hp_t5325_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index d6f6502ac9b..4bd70754729 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/gpio.h> #include <asm/leds.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index b26f992071d..acc70143581 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -169,8 +169,8 @@ static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&iomem_resource, &pci_mem); request_resource(&ioport_resource, &pci_io); - pci_add_resource(&sys->resources, &pci_io); - pci_add_resource(&sys->resources, &pci_mem); + pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset); + pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset); /* Assign and enable processor bridge */ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b0..9e3b90df32e 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc..c74de01ab5b 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3..f2735281616 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb7606012..3588a558415 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12e..ada1213982b 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a5..bc97170125b 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 0a113424632..962e7116975 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -80,12 +80,8 @@ static struct of_device_id msm_dt_gic_match[] __initdata = { static void __init msm8x60_dt_init(void) { - struct device_node *node; - - node = of_find_matching_node_by_address(NULL, msm_dt_gic_match, - MSM8X60_QGIC_DIST_PHYS); - if (node) - irq_domain_add_simple(node, GIC_SPI_START); + irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, + GIC_SPI_START); if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad..a5dcf766a3f 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -19,6 +19,7 @@ #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index b61b5092712..3752302ae2e 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -24,296 +24,296 @@ #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) @@ -323,14 +323,14 @@ #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) -#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 8459f6d7d8c..df3e38055a2 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -155,8 +155,8 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_set_local_bus_nr(pp->base, sys->busnr); orion_pcie_setup(pp->base); - pci_add_resource(&sys->resources, &pp->res[0]); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e..922ab0dc2bc 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -37,7 +37,6 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) - select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -45,7 +44,6 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -72,7 +70,6 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 11c85cd2731..9923f92b545 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,9 @@ obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 88909cc0b25..e0e8245f3c9 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/export.h> +#include <linux/omapfb.h> #include <media/soc_camera.h> @@ -169,10 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] __initdata = { - { OMAP_TAG_LCD, &ams_delta_lcd_config }, -}; - static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -302,8 +299,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - omap_board_config = ams_delta_config; - omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); @@ -321,6 +316,8 @@ static void __init ams_delta_init(void) ams_delta_init_fiq(); omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); + + omapfb_set_lcd_config(&ams_delta_lcd_config); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0b9464b4121..7afaf3c5bdc 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -21,6 +21,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -273,27 +274,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] __initdata = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { /* Early, board-dependent init */ @@ -352,10 +343,10 @@ static void __init omap_fsample_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00ad6b22d60..af2be8c12c0 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> @@ -325,18 +326,12 @@ static struct platform_device h2_irda_device = { .resource = h2_irda_resources, }; -static struct platform_device h2_lcd_device = { - .name = "lcd_h2", - .id = -1, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, - &h2_lcd_device, }; static void __init h2_init_smc91x(void) @@ -391,10 +386,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_LCD, &h2_lcd_config }, -}; - static void __init h2_init(void) { h2_init_smc91x(); @@ -438,13 +429,13 @@ static void __init h2_init(void) omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_board_config = h2_config; - omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); h2_mmc_init(); + + omapfb_set_lcd_config(&h2_lcd_config); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4a7f2514970..7cfd25b9073 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -30,6 +30,7 @@ #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <asm/setup.h> #include <asm/page.h> @@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_LCD, &h3_lcd_config }, -}; - static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), @@ -426,13 +423,13 @@ static void __init h3_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); - omap_board_config = h3_config; - omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); h3_mmc_init(); + + omapfb_set_lcd_config(&h3_lcd_config); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 731cc3db7ab..af2afcf24f7 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -36,6 +36,7 @@ #include <linux/leds.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/omapfb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -398,10 +399,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; - static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, @@ -580,8 +577,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_board_config = htcherald_config; - omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -598,6 +593,8 @@ static void __init htcherald_init(void) htc_mmc_data[0] = &htc_mmc1_data; omap1_init_mmc(htc_mmc_data, 1); #endif + + omapfb_set_lcd_config(&htcherald_lcd_config); } MACHINE_START(HERALD, "HTC Herald") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea697..1d5ab6606b9 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -25,6 +25,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -370,10 +371,6 @@ static inline void innovator_mmc_init(void) } #endif -static struct omap_board_config_kernel innovator_config[] = { - { OMAP_TAG_LCD, NULL }, -}; - static void __init innovator_init(void) { if (cpu_is_omap1510()) @@ -416,17 +413,15 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + omapfb_set_lcd_config(&innovator1510_lcd_config); } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + omapfb_set_lcd_config(&innovator1610_lcd_config); } #endif - omap_board_config = innovator_config; - omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); innovator_mmc_init(); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index f9efc036ba9..9b6332a31fb 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -31,7 +31,6 @@ #include <plat/board.h> #include <plat/keypad.h> #include "common.h" -#include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h> @@ -99,15 +98,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; +static struct omap_lcd_config nokia770_lcd_config __initdata = { + .ctrl_name = "hwa742", +}; + static void __init mipid_dev_init(void) { - const struct omap_lcd_config *conf; + nokia770_mipid_platform_data.nreset_gpio = 13; + nokia770_mipid_platform_data.data_lines = 16; - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) { - nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; - nokia770_mipid_platform_data.data_lines = conf->data_lines; - } + omapfb_set_lcd_config(&nokia770_lcd_config); } static void __init ads7846_dev_init(void) @@ -150,14 +150,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; -static struct hwa742_platform_data nokia770_hwa742_platform_data = { - .te_connected = 1, -}; - static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); - omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); } /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 675de06557a..ef874655fbd 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -34,6 +34,7 @@ #include <linux/i2c.h> #include <linux/leds.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -300,12 +301,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] __initdata = { -#ifdef CONFIG_OMAP_OSK_MISTRAL - { OMAP_TAG_LCD, &osk_lcd_config }, -#endif -}; - #ifdef CONFIG_OMAP_OSK_MISTRAL #include <linux/input.h> @@ -549,8 +544,6 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); - omap_board_config = osk_config; - omap_board_config_size = ARRAY_SIZE(osk_config); l = omap_readl(USB_TRANSCEIVER_CTRL); l |= (3 << 1); @@ -567,6 +560,11 @@ static void __init osk_init(void) omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); + +#ifdef CONFIG_OMAP_OSK_MISTRAL + omapfb_set_lcd_config(&osk_lcd_config); +#endif + } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 81fa27f8836..612342cb2a2 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -209,10 +210,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_LCD, &palmte_lcd_config }, -}; - static struct spi_board_info palmte_spi_info[] __initdata = { { .modalias = "tsc2102", @@ -250,9 +247,6 @@ static void __init omap_palmte_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_board_config = palmte_config; - omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); @@ -260,6 +254,8 @@ static void __init omap_palmte_init(void) omap_serial_init(); omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmte_lcd_config); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 81cb8217838..b63350bc88f 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -24,6 +24,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -273,10 +274,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmtt_config[] __initdata = { - { OMAP_TAG_LCD, &palmtt_lcd_config }, -}; - static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); @@ -298,15 +295,14 @@ static void __init omap_palmtt_init(void) omap_mpu_wdt_mode(0); - omap_board_config = palmtt_config; - omap_board_config_size = ARRAY_SIZE(palmtt_config); - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&palmtt_lcd_config); } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e881945ce8e..9924c70af09 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -239,10 +240,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel palmz71_config[] __initdata = { - {OMAP_TAG_LCD, &palmz71_lcd_config}, -}; - static irqreturn_t palmz71_powercable(int irq, void *dev_id) { @@ -313,9 +310,6 @@ omap_palmz71_init(void) palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); - omap_board_config = palmz71_config; - omap_board_config_size = ARRAY_SIZE(palmz71_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(palmz71_boardinfo, @@ -324,6 +318,8 @@ omap_palmz71_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); + + omapfb_set_lcd_config(&palmz71_lcd_config); } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index c000bed7627..8e0153447c6 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -21,6 +21,7 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -232,27 +233,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] __initdata = { - { OMAP_TAG_LCD, &perseus2_lcd_config }, -}; - static void __init perseus2_init_smc91x(void) { fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); @@ -320,10 +311,10 @@ static void __init omap_perseus2_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = perseus2_config; - omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&perseus2_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 7bcd82ab0fd..0c76e12337d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -27,6 +27,7 @@ #include <linux/i2c.h> #include <linux/errno.h> #include <linux/export.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -355,11 +356,6 @@ static struct omap_usb_config sx1_usb_config __initdata = { /*----------- LCD -------------------------*/ -static struct platform_device sx1_lcd_device = { - .name = "lcd_sx1", - .id = -1, -}; - static struct omap_lcd_config sx1_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -368,14 +364,8 @@ static struct omap_lcd_config sx1_lcd_config __initdata = { static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, - &sx1_lcd_device, &sx1_irda_device, }; -/*-----------------------------------------*/ - -static struct omap_board_config_kernel sx1_config[] __initdata = { - { OMAP_TAG_LCD, &sx1_lcd_config }, -}; /*-----------------------------------------*/ @@ -391,8 +381,6 @@ static void __init omap_sx1_init(void) platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); - omap_board_config = sx1_config; - omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); @@ -406,6 +394,8 @@ static void __init omap_sx1_init(void) gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + + omapfb_set_lcd_config(&sx1_lcd_config); } MACHINE_START(SX1, "OMAP310 based Siemens SX1") diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 1d76a63c098..187b2fe132e 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -28,7 +28,6 @@ #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> -#include <plat/mcbsp.h> #include "clock.h" @@ -250,16 +249,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (!cpu_is_omap7xx()) - platform_device_register(&omap_mcbsp3); platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 453809359ba..4c5ce7d829c 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " + printk(KERN_ERR "DMA virtual resolution is not supported " "in 1510 mode\n"); BUG(); } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 91f9abbd325..3e8410a9999 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -420,18 +420,6 @@ static int __init omap1_mcbsp_init(void) return -ENODEV; if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; - else if (cpu_is_omap15xx()) - omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; - else if (cpu_is_omap16xx()) - omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; - - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, OMAP7XX_MCBSP_RES_SZ, omap7xx_mcbsp_pdata, @@ -449,7 +437,7 @@ static int __init omap1_mcbsp_init(void) omap16xx_mcbsp_pdata, OMAP16XX_MCBSP_COUNT); - return omap_mcbsp_init(); + return 0; } arch_initcall(omap1_mcbsp_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d965da45160..e20c8ab80b0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238cbc1..06326a6e460 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,13 +11,15 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 21fc8764866..44cf1893829 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -25,6 +25,7 @@ #include <linux/regulator/fixed.h> #include <linux/leds.h> #include <linux/leds_pwm.h> +#include <linux/platform_data/omap4-keypad.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -41,6 +42,7 @@ #include <video/omap-panel-nokia-dsi.h> #include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include "mux.h" #include "hsmmc.h" @@ -378,12 +380,40 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { + .card_name = "SDP4430", + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_ep = 1, + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_vibra = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .has_dmic = 1, + .has_hsmic = 1, + .has_mainmic = 1, + .has_submic = 1, + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .jack_detection = 1, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, +}; + +static struct platform_device sdp4430_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &sdp4430_abe_audio_data, + }, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, + &sdp4430_abe_audio, }; static struct omap_musb_board_data musb_board_data = { @@ -814,7 +844,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; -static void omap_4430sdp_display_init(void) +static void __init omap_4430sdp_display_init(void) { int r; @@ -851,7 +881,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void omap4_sdp4430_wifi_mux_init(void) +static void __init omap4_sdp4430_wifi_mux_init(void) { omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); @@ -878,12 +908,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; -static void omap4_sdp4430_wifi_init(void) +static void __init omap4_sdp4430_wifi_init(void) { + int ret; + omap4_sdp4430_wifi_mux_init(); - if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) - pr_err("Error setting wl12xx data\n"); - platform_device_register(&omap_vwlan_device); + ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); + if (ret) + pr_err("Error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap_vwlan_device); + if (ret) + pr_err("Error registering wl12xx device: %d\n", ret); } static void __init omap_4430sdp_init(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a..d73316ed420 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; -static void cm_t35_init_usbh(void) +static void __init cm_t35_init_usbh(void) { int err; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index d5875606048..45fdfe2bd9d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <plat/board.h> @@ -67,7 +68,7 @@ static void __init omap_generic_init(void) { struct device_node *node = of_find_matching_node(NULL, intc_match); if (node) - irq_domain_add_simple(node, 0); + irq_domain_add_legacy(node, 32, 0, 0, &irq_domain_simple_ops, NULL); omap_sdrc_init(NULL, NULL); @@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad2..67226271760 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c934..c877236a844 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); @@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, }; +static void __init omap3_evm_wl12xx_init(void) +{ +#ifdef CONFIG_WL12XX_PLATFORM_DATA + int ret; + + /* WL12xx WLAN Init */ + ret = wl12xx_set_platform_data(&omap3evm_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap3evm_wlan_regulator); + if (ret) + pr_err("error registering wl12xx device: %d\n", ret); +#endif +} + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); - -#ifdef CONFIG_WL12XX_PLATFORM_DATA - /* WL12xx WLAN Init */ - if (wl12xx_set_platform_data(&omap3evm_wlan_data)) - pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_wlan_regulator); -#endif + omap3_evm_wl12xx_init(); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b7779c206a9..e4415917693 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -91,9 +92,34 @@ static struct platform_device leds_gpio = { }, }; +static struct omap_abe_twl6040_data panda_abe_audio_data = { + /* Audio out */ + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* HandsFree through expasion connector */ + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM RX, PandaBoardES: audio in */ + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* No jack detection. */ + .jack_detection = 0, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, + +}; + +static struct platform_device panda_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &panda_abe_audio_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, + &panda_abe_audio, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { @@ -252,8 +278,25 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } +static struct twl4030_codec_data twl6040_codec = { + /* single-step ramp for headset and handsfree */ + .hs_left_step = 0x0f, + .hs_right_step = 0x0f, + .hf_left_step = 0x1d, + .hf_right_step = 0x1d, +}; + +static struct twl4030_audio_data twl6040_audio = { + .codec = &twl6040_codec, + .audpwron_gpio = 127, + .naudint_irq = OMAP44XX_IRQ_SYS_2N, + .irq_base = TWL6040_CODEC_IRQ_BASE, +}; + /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata; +static struct twl4030_platform_data omap4_panda_twldata = { + .audio = &twl6040_audio, +}; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -485,17 +528,34 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } +static void omap4_panda_init_rev(void) +{ + if (cpu_is_omap443x()) { + /* PandaBoard 4430 */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoard"; + panda_abe_audio_data.has_hsmic = 1; + } else { + /* PandaBoard ES */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoardES"; + } +} + static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + omap4_panda_init_rev(); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfea..c126461836a 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) - pr_err("error setting wl12xx data\n"); + int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap_i2c_init(); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde2ff1..7e9338e8d68 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84..72e018b9b26 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 283d11eae69..f713818be06 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/platform_data/omap4-keypad.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -26,7 +27,6 @@ #include <plat/tc.h> #include <plat/board.h> -#include <plat/mcbsp.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> @@ -304,29 +304,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -/* - * OMAP2420 has 2 McBSP ports - * OMAP2430 has 5 McBSP ports - * OMAP3 has 5 McBSP ports - * OMAP4 has 4 McBSP ports - */ -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); -OMAP_MCBSP_PLATFORM_DEVICE(4); -OMAP_MCBSP_PLATFORM_DEVICE(5); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - platform_device_register(&omap_mcbsp3); - platform_device_register(&omap_mcbsp4); - } - if (cpu_is_omap243x() || cpu_is_omap34xx()) - platform_device_register(&omap_mcbsp5); - platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d2..bbb870c04a5 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index ad0adb5a1e0..19dd1657245 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -428,9 +428,10 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -487,10 +488,15 @@ done: kfree(mmc_data); } -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605ea..719ee423abe 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb64..e501b4972a6 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/omapfb.h> #include <asm/tlb.h> @@ -307,6 +306,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e..415a6f1cf41 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index fb4bcf81a18..ecc039e794d 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -34,7 +34,7 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" -/* McBSP internal signal muxing function */ +/* McBSP1 internal signal muxing function for OMAP2/3 */ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, const char *src) { @@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, return 0; } +/* McBSP4 internal signal muxing function for OMAP4 */ +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) +static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, + const char *src) +{ + u32 v; + + /* + * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR + * mux) is used */ + v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + if (!strcmp(signal, "clkr")) { + if (!strcmp(src, "clkr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else if (!strcmp(src, "clkx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else + return -EINVAL; + } else if (!strcmp(signal, "fsr")) { + if (!strcmp(src, "fsr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else if (!strcmp(src, "fsx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else + return -EINVAL; + } else { + return -EINVAL; + } + + omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + return 0; +} + /* McBSP CLKS source switching function */ static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, const char *src) @@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->has_ccr = true; } pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) + + /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ + if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; + /* On OMAP4 the McBSP4 port has 6 pin configuration */ + if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) + pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; + if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ @@ -180,7 +222,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - omap_mcbsp_count++; return 0; } @@ -188,11 +229,6 @@ static int __init omap2_mcbsp_init(void) { omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - return omap_mcbsp_init(); + return 0; } arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e1cc75d1a57..611a0e3d54c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int __init omap_mux_init_gpio(int gpio, int val) +int omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -218,7 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int __init omap_mux_init_signal(const char *muxname, int val) +int omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; @@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, omap_mux_package_init_balls(package_balls, superset); } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { omap_mux_set_cmdline_signals(); omap_mux_write_array(partition, board_mux); @@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, { } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { } diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef..503ac777a2b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/init.h> + __CPUINIT /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index b8822048e40..ac49384d028 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -150,7 +150,8 @@ err_out: platform_device_put(omap_iommu_pdev[i]); return err; } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4..70de277f5c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,12 +24,14 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> #include "common.h" #include "omap4-sar-layout.h" +#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -43,6 +45,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -51,19 +56,22 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +83,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40e..eba6cd3816f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { - WARN(1, "omap_hwmod: %s: enabled state can only be entered " - "from initialized, idle, or disabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", + oh->name); return -EINVAL; } @@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: idle state can only be entered from " - "enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", + oh->name); return -EINVAL; } @@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: disabled state can only be entered " - "from idle, or enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", + oh->name); return -EINVAL; } @@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) BUG_ON(!oh); if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to " - "device configuration\n", oh->name); + WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", + oh->name); return; } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe91514..5a65dd04aa3 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b8822f8b289..23de98d0384 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -82,13 +82,7 @@ static int omap2_fclks_active(void) f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); - f2 &= ~OMAP24XX_EN_UART3_MASK; - - if (f1 | f2) - return 1; - return 0; + return (f1 | f2) ? 1 : 0; } static void omap2_enter_full_retention(void) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aa..a1d6154dc12 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> +#include <plat/irqs.h> #include <plat/prcm.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f2..f590afc1f67 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 10b20c652e5..4b57757bf9d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b74..f51348dafaf 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 031d116fbf1..175b7d86d86 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data * - * Use PMIC supplied seetings for I2C high-speed mode and + * Use PMIC supplied settings for I2C high-speed mode and * master code (if set) and program the VC I2C configuration * register. * @@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for all channels must match.", - __func__); + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + __func__, voltdm->name, i2c_high_speed); return; } @@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) u32 val; if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); return; } diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e38..57db2038b23 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595..c3115f6853d 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 807391d84a9..0df88820978 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) u32 val, sys_clk_rate, timeout, waittime; u32 vddmin, vddmax, vstepmin, vstepmax; + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); + return; + } + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0e28bae20bd..5dad38ec00e 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <mach/orion5x.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> @@ -72,7 +73,8 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, + EHCI_PHY_ORION); } diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index a104d5a80e1..e52108c9aae 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -214,7 +214,7 @@ void __init db88f5281_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "db88f5281_pci_preinit faield to " + printk(KERN_ERR "db88f5281_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -227,7 +227,7 @@ void __init db88f5281_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "db88f5281_pci_preinit faield " + printk(KERN_ERR "db88f5281_pci_preinit failed " "to set_irq_type pin %d\n", pin); gpio_free(pin); } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 09a045f0c40..d6a91948e4d 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -171,13 +171,14 @@ static int __init pcie_setup(struct pci_sys_data *sys) /* * IORESOURCE_IO */ + sys->io_offset = 0; res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; res[0].start = ORION5X_PCIE_IO_BUS_BASE; res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &res[0]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -188,9 +189,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &res[1]); - - sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } @@ -499,13 +498,14 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * IORESOURCE_IO */ + sys->io_offset = 0; res[0].name = "PCI I/O Space"; res[0].flags = IORESOURCE_IO; res[0].start = ORION5X_PCI_IO_BUS_BASE; res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCI IO resource failed\n"); - pci_add_resource(&sys->resources, &res[0]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -516,9 +516,7 @@ static int __init pci_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCI Memory resource failed\n"); - pci_add_resource(&sys->resources, &res[1]); - - sys->io_offset = 0; + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 96438b6b202..e3ce6171147 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -149,7 +149,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } @@ -162,7 +162,7 @@ void __init rd88f5182_pci_preinit(void) if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " + printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index d93ceef4a50..37c2de9b6f2 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -68,7 +68,7 @@ void __init sirfsoc_of_irq_init(void) if (!sirfsoc_intc_base) panic("unable to map intc cpu registers\n"); - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL); of_node_put(np); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 0d729e6619d..42d5cca6625 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #endif extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa_gpio_syscore_ops; extern struct syscore_ops pxa2xx_mfp_syscore_ops; extern struct syscore_ops pxa3xx_mfp_syscore_ops; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4c..208eef1c048 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* + * Asahi Kasei AK4641 on I2C + */ + +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, + }, +}; + +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + +/* * PCMCIA */ @@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, + &audio, &pcmcia, }; @@ -827,6 +851,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f14775536b8..29b62afc6f7 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void) { int i; + /* running before pxa_gpio_probe() */ +#ifdef CONFIG_CPU_PXA26x + pxa_last_gpio = 89; +#else + pxa_last_gpio = 84; +#endif for (i = 0; i <= pxa_last_gpio; i++) gpio_desc[i].valid = 1; @@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void) { int i, gpio; + pxa_last_gpio = 120; /* running before pxa_gpio_probe() */ for (i = 0; i <= pxa_last_gpio; i++) { /* skip GPIO2, 5, 6, 7, 8, they are not * valid pins allow configuration diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c0376..3352b37b60c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> @@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -368,7 +368,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf386..6bce78edce7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -456,7 +456,6 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index e28dfb88827..5ead6d480c6 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -33,7 +33,7 @@ struct pxa3xx_u2d_ulpi { struct clk *clk; void __iomem *mmio_base; - struct otg_transceiver *otg; + struct usb_phy *otg; unsigned int ulpi_mode; }; @@ -79,7 +79,7 @@ static int pxa310_ulpi_poll(void) return -ETIMEDOUT; } -static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg) +static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg) { int err; @@ -98,7 +98,7 @@ static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg) return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA; } -static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) +static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg) { if (pxa310_ulpi_get_phymode() != SYNCH) { pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); @@ -111,7 +111,7 @@ static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) return pxa310_ulpi_poll(); } -struct otg_io_access_ops pxa310_ulpi_access_ops = { +struct usb_phy_io_ops pxa310_ulpi_access_ops = { .read = pxa310_ulpi_read, .write = pxa310_ulpi_write, }; @@ -139,19 +139,19 @@ static int pxa310_start_otg_host_transcvr(struct usb_bus *host) pxa310_otg_transceiver_rtsm(); - err = otg_init(u2d->otg); + err = usb_phy_init(u2d->otg); if (err) { pr_err("OTG transceiver init failed"); return err; } - err = otg_set_vbus(u2d->otg, 1); + err = otg_set_vbus(u2d->otg->otg, 1); if (err) { pr_err("OTG transceiver VBUS set failed"); return err; } - err = otg_set_host(u2d->otg, host); + err = otg_set_host(u2d->otg->otg, host); if (err) pr_err("OTG transceiver Host mode set failed"); @@ -189,9 +189,9 @@ static void pxa310_stop_otg_hc(void) { pxa310_otg_transceiver_rtsm(); - otg_set_host(u2d->otg, NULL); - otg_set_vbus(u2d->otg, 0); - otg_shutdown(u2d->otg); + otg_set_host(u2d->otg->otg, NULL); + otg_set_vbus(u2d->otg->otg, 0); + usb_phy_shutdown(u2d->otg); } static void pxa310_u2d_setup_otg_hc(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4f402afa660..3918a672238 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -462,7 +462,6 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa3xx_mfp_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index d082a583df7..5ce434b95e8 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -283,7 +283,6 @@ static int __init pxa95x_init(void) return ret; register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa_gpio_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a..5aded5e6148 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a..30989baf7f2 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac5152..438f02fe122 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 7dc6c46b5e2..5404535da1a 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2410_cpufreq_add(struct device *dev) +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); } @@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void) arch_initcall(s3c2410_cpufreq_init); -static int s3c2410a_cpufreq_add(struct device *dev) +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own @@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev) s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; - return s3c2410_cpufreq_add(dev); + return s3c2410_cpufreq_add(dev, sif); } static struct subsys_interface s3c2410a_cpufreq_interface = { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 2afd00014a7..4803338cf56 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { }, }; -static int __init s3c2410_dma_add(struct device *dev) +static int __init s3c2410_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2410_dma_order); @@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = { static int __init s3c2410_dma_drvinit(void) { - return subsys_interface_register(&s3c2410_interface); + return subsys_interface_register(&s3c2410_dma_interface); } arch_initcall(s3c2410_dma_drvinit); diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index c07438bfc99..e0b3b347da8 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, }; -static int s3c2410_plls_add(struct device *dev) +static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) { return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); } diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index fda5385deff..03f706dd600 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { .resume = s3c2410_pm_resume, }; -static int s3c2410_pm_add(struct device *dev) +static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2410_pm_prepare; pm_cpu_sleep = s3c2410_cpu_suspend; diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index d8664b7652c..125be7d5fa6 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; -static int s3c2412_cpufreq_add(struct device *dev) +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { unsigned long fclk_rate; diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 142acd3b5e1..38472ac920f 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .map_size = ARRAY_SIZE(s3c2412_dma_mappings), }; -static int __init s3c2412_dma_add(struct device *dev) +static int __init s3c2412_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index a8a46c1644f..e65619ddbcc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) static struct irq_chip s3c2412_irq_rtc_chip; -static int s3c2412_irq_add(struct device *dev) +static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index d1adfa65f66..d04588506ec 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) { } -static int s3c2412_pm_add(struct device *dev) +static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2412_pm_prepare; pm_cpu_sleep = s3c2412_cpu_suspend; diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 36df761061d..fd49f35e448 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static int __init s3c2416_irq_add(struct device *dev) +static int __init s3c2416_irq_add(struct device *dev, + struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 3bdb15a0d41..1bd4817b8eb 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); } -static int s3c2416_pm_add(struct device *dev) +static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2416_pm_prepare; pm_cpu_sleep = s3c2416_cpu_suspend; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bedbc87a342..414364eb426 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev) +static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h index db8a98ac68c..0c1eb1dfc53 100644 --- a/arch/arm/mach-s3c2440/common.h +++ b/arch/arm/mach-s3c2440/common.h @@ -12,6 +12,6 @@ #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H #define __ARCH_ARM_MACH_S3C2440_COMMON_H -void s3c2440_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 15b1ddf8f62..5f0a0c8ef84 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { }, }; -static int __init s3c2440_dma_add(struct device *dev) +static int __init s3c2440_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2440_dma_order); diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 4fee9bc6bcb..4a18cde439c 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { .irq_ack = s3c_irq_wdtac97_ack, }; -static int s3c2440_irq_add(struct device *dev) +static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 24569550de1..19b577bc09b 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index d6a9763110c..d7ae49c9011 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 5859e609d28..9a4a5bc008e 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index adbbb85bc4c..5d66fb218a4 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 40eaf844bc1..5198e3e1c5b 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 4c480ef734f..c5daeb612a8 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 80077f6472e..6f68abf44fa 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 20103bafbd4..56af3544759 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 1deb60d12a6..83a1036d7dc 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .timer = &s3c24xx_timer, - .restart = s3c2440_restart, + .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index cf7596694ef..61776764d9f 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c @@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2440_cpufreq_add(struct device *dev) +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { xtal = s3c_cpufreq_clk_get(NULL, "xtal"); hclk = s3c_cpufreq_clk_get(NULL, "hclk"); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index b5368ae8d7f..551fb433be8 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; -static int s3c2440_plls12_add(struct device *dev) +static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 42f2b5cd239..3f15bcf6429 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; -static int s3c2440_plls169344_add(struct device *dev) +static int s3c2440_plls169344_add(struct device *dev, + struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 517623a09fc..2b3dddb49af 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -35,7 +35,6 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> #include <plat/pm.h> -#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -74,15 +73,3 @@ void __init s3c2440_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } - -void s3c2440_restart(char mode, const char *cmd) -{ - if (mode == 's') { - soft_restart(0); - } - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 8004e0497bf..22cb7c94a8c 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { }, }; -static int s3c2442_clk_add(struct device *dev) +static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index b3fdbdda3d5..6d9b688c442 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -72,7 +72,7 @@ static struct clk clk_arm = { }, }; -static int s3c244x_clk_add(struct device *dev) +static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 74d3dcf46a4..5fe8e58d3af 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { .irq_ack = s3c_irq_cam_ack, }; -static int s3c244x_irq_add(struct device *dev) +static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 36bc60f61d0..d15852f642b 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/pm.h> #include <plat/pll.h> #include <plat/nand-core.h> +#include <plat/watchdog-reset.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = { .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; + +void s3c244x_restart(char mode, const char *cmd) +{ + if (mode == 's') + soft_restart(0); + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index de6b4a23c9e..14224517e62 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { .map_size = ARRAY_SIZE(s3c2443_dma_mappings), }; -static int __init s3c2443_dma_add(struct device *dev) +static int __init s3c2443_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); return s3c24xx_dma_init_map(&s3c2443_dma_sel); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 35e4ff24fb4..ac2829f56d1 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev) +static int __init s3c2443_irq_add(struct device *dev, + struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4ae..aebbcc291b4 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9..bee7dcd4df7 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index cd3c97e2ee7..32a30f38ba0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -102,6 +102,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, + .in4_dc_measure = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 23f9b22439c..9cba18bfe47 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) } -static int s5p64x0_pm_add(struct device *dev) +static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5p64x0_pm_prepare; pm_cpu_sleep = s5p64x0_cpu_suspend; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index c78dfddd77f..b9ec0c35379 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); } @@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = { }, { .name = "hdmiphy", .devname = "s5pv210-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, + .enable = s5pv210_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, { .name = "dacphy", diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 677c71c41e5..736bfb103cb 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev) +static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 0d01ca78892..b466bca9c65 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -244,9 +244,11 @@ static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys) printk(KERN_ERR "PCI: unable to allocate prefetchable\n"); return -EBUSY; } - pci_add_resource(&sys->resources, &pci_io_ports); - pci_add_resource(&sys->resources, &pci_non_prefetchable_memory); - pci_add_resource(&sys->resources, &pci_prefetchable_memory); + pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset); + pci_add_resource_offset(&sys->resources, + &pci_non_prefetchable_memory, sys->mem_offset); + pci_add_resource_offset(&sys->resources, + &pci_prefetchable_memory, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75e..12c431f3443 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -159,19 +160,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -236,16 +230,6 @@ static void lcd_backlight_reset(void) gpio_set_value(GPIO_PORT235, 1); } -static void lcd_on(void *board_data, struct fb_info *info) -{ - lcd_backlight_on(); -} - -static void lcd_off(void *board_data) -{ - lcd_backlight_reset(); -} - /* LCDC0 */ static const struct fb_videomode lcdc0_modes[] = { { @@ -269,14 +253,14 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, - .lcd_size_cfg.width = 44, - .lcd_size_cfg.height = 79, .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = lcdc0_modes, - .num_cfg = ARRAY_SIZE(lcdc0_modes), - .board_cfg = { - .display_on = lcd_on, - .display_off = lcd_off, + .lcd_modes = lcdc0_modes, + .num_modes = ARRAY_SIZE(lcdc0_modes), + .panel_cfg = { + .width = 44, + .height = 79, + .display_on = lcd_backlight_on, + .display_off = lcd_backlight_reset, }, } }; @@ -321,12 +305,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +318,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f75..f90ba5b850a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -258,10 +258,16 @@ static struct sh_mobile_meram_info meram_info = { static struct resource meram_resources[] = { [0] = { - .name = "MERAM", - .start = 0xe8000000, - .end = 0xe81fffff, - .flags = IORESOURCE_MEM, + .name = "regs", + .start = 0xe8000000, + .end = 0xe807ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "meram", + .start = 0xe8080000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, }, }; @@ -295,15 +301,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +308,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -445,82 +443,6 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -static const struct fb_videomode ap4evb_lcdc_modes[] = { - { -#ifdef CONFIG_AP4EVB_QHD - .name = "R63302(QHD)", - .xres = 544, - .yres = 961, - .left_margin = 72, - .right_margin = 600, - .hsync_len = 16, - .upper_margin = 8, - .lower_margin = 8, - .vsync_len = 2, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, -#else - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 220, - .right_margin = 110, - .hsync_len = 70, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, -#endif - }, -}; -static struct sh_mobile_meram_cfg lcd_meram_cfg = { - .icb[0] = { - .marker_icb = 28, - .cache_icb = 24, - .meram_offset = 0x0, - .meram_size = 0x40, - }, - .icb[1] = { - .marker_icb = 29, - .cache_icb = 25, - .meram_offset = 0x40, - .meram_size = 0x40, - }, -}; - -static struct sh_mobile_lcdc_info lcdc_info = { - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = ap4evb_lcdc_modes, - .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), - .meram_cfg = &lcd_meram_cfg, - } -}; - -static struct resource lcdc_resources[] = { - [0] = { - .name = "LCDC", - .start = 0xfe940000, /* P4-only space */ - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc_resources), - .resource = lcdc_resources, - .dev = { - .platform_data = &lcdc_info, - .coherent_dma_mask = ~0, - }, -}; - /* * QHD display */ @@ -564,20 +486,25 @@ static struct platform_device keysc_device = { }; /* MIPI-DSI */ -#define PHYCTRL 0x0070 static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); - void __iomem *phy = base + PHYCTRL; if (IS_ERR(pck)) return PTR_ERR(pck); if (enable) { + /* + * DSIPCLK = 24MHz + * D-PHY = DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl) + * HsByteCLK = D-PHY/8 = 39MHz + * + * X * Y * FPS = + * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz + */ clk_set_rate(pck, clk_round_rate(pck, 24000000)); - iowrite32(ioread32(phy) | (0xb << 8), phy); clk_enable(pck); } else { clk_disable(pck); @@ -601,11 +528,14 @@ static struct resource mipidsi0_resources[] = { }, }; +static struct sh_mobile_lcdc_info lcdc_info; + static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc_info.ch[0], .lane = 2, .vsynw_offset = 17, + .phyctrl = 0x6 << 8, .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | SH_MIPI_DSI_HSbyteCLK, .set_dot_clock = sh_mipi_set_dot_clock, @@ -627,6 +557,81 @@ static struct platform_device *qhd_devices[] __initdata = { }; #endif /* CONFIG_AP4EVB_QHD */ +/* LCDC0 */ +static const struct fb_videomode ap4evb_lcdc_modes[] = { + { +#ifdef CONFIG_AP4EVB_QHD + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +#else + .name = "WVGA Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +#endif + }, +}; + +static const struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .meram_size = 0x40, + }, + .icb[1] = { + .meram_size = 0x40, + }, +}; + +static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &meram_info, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .lcd_modes = ap4evb_lcdc_modes, + .num_modes = ARRAY_SIZE(ap4evb_lcdc_modes), + .meram_cfg = &lcd_meram_cfg, +#ifdef CONFIG_AP4EVB_QHD + .tx_dev = &mipidsi0_device, +#endif + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + /* FSI */ #define IRQ_FSI evt2irq(0x1840) static int __fsi_set_rate(struct clk *clk, long rate, int enable) @@ -745,26 +750,18 @@ fsi_set_rate_end: return ret; } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) -{ - int ret; - - if (is_porta) - ret = fsi_ak4642_set_rate(dev, rate, enable); - else - ret = fsi_hdmi_set_rate(dev, rate, enable); - - return ret; -} - static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_FMT_SPDIF, - .set_rate = fsi_set_rate, + .port_a = { + .flags = SH_FSI_BRS_INV, + .set_rate = fsi_ak4642_set_rate, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_FMT_SPDIF, + .set_rate = fsi_hdmi_set_rate, + }, }; static struct resource fsi_resources[] = { @@ -802,69 +799,15 @@ static struct fsi_ak4642_info fsi2_ak4643_info = { static struct platform_device fsi_ak4643_device = { .name = "fsi-ak4642-audio", .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct sh_mobile_meram_cfg hdmi_meram_cfg = { - .icb[0] = { - .marker_icb = 30, - .cache_icb = 26, - .meram_offset = 0x80, - .meram_size = 0x100, - }, - .icb[1] = { - .marker_icb = 31, - .cache_icb = 27, - .meram_offset = 0x180, - .meram_size = 0x100, - }, -}; - -static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { - .clock_source = LCDC_CLK_EXTERNAL, - .meram_dev = &meram_info, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, - .meram_cfg = &hdmi_meram_cfg, - } -}; - -static struct resource lcdc1_resources[] = { - [0] = { - .name = "LCDC1", - .start = 0xfe944000, - .end = 0xfe947fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x1780), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc1_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc1_resources), - .resource = lcdc1_resources, - .id = 1, - .dev = { - .platform_data = &sh_mobile_lcdc1_info, - .coherent_dma_mask = ~0, + .platform_data = &fsi2_ak4643_info, }, }; +/* LCDC1 */ static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq); - static struct sh_mobile_hdmi_info hdmi_info = { - .lcd_chan = &sh_mobile_lcdc1_info.ch[0], - .lcd_dev = &lcdc1_device.dev, .flags = HDMI_SND_SRC_SPDIF, .clk_optimize_parent = ap4evb_clk_optimize, }; @@ -893,10 +836,6 @@ static struct platform_device hdmi_device = { }, }; -static struct platform_device fsi_hdmi_device = { - .name = "sh_fsi2_b_hdmi", -}; - static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq) { @@ -916,6 +855,57 @@ static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, return error; } +static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .meram_size = 0x100, + }, + .icb[1] = { + .meram_size = 0x100, + }, +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .meram_dev = &meram_info, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, + .tx_dev = &hdmi_device, + } +}; + +static struct resource lcdc1_resources[] = { + [0] = { + .name = "LCDC1", + .start = 0xfe944000, + .end = 0xfe947fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x1780), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc1_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc1_resources), + .resource = lcdc1_resources, + .id = 1, + .dev = { + .platform_data = &sh_mobile_lcdc1_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct platform_device fsi_hdmi_device = { + .name = "sh_fsi2_b_hdmi", +}; + static struct gpio_led ap4evb_leds[] = { { .name = "led4", @@ -1050,9 +1040,9 @@ static struct platform_device *ap4evb_devices[] __initdata = { &fsi_ak4643_device, &fsi_hdmi_device, &sh_mmcif_device, - &lcdc1_device, - &lcdc_device, &hdmi_device, + &lcdc_device, + &lcdc1_device, &ceu_device, &ap4evb_camera, &meram_device, @@ -1363,8 +1353,8 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB24; lcdc_info.ch[0].clock_divider = 1; lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; - lcdc_info.ch[0].lcd_size_cfg.width = 44; - lcdc_info.ch[0].lcd_size_cfg.height = 79; + lcdc_info.ch[0].panel_cfg.width = 44; + lcdc_info.ch[0].panel_cfg.height = 79; platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); @@ -1405,8 +1395,8 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB18; lcdc_info.ch[0].clock_divider = 3; lcdc_info.ch[0].flags = 0; - lcdc_info.ch[0].lcd_size_cfg.width = 152; - lcdc_info.ch[0].lcd_size_cfg.height = 91; + lcdc_info.ch[0].panel_cfg.width = 152; + lcdc_info.ch[0].panel_cfg.height = 91; /* enable TouchScreen */ irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 4d220162232..c79baa9ef61 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -27,6 +27,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/videodev2.h> #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -241,13 +242,13 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 5, .flags = 0, - .lcd_cfg = &lcdc0_mode, - .num_cfg = 1, - .lcd_size_cfg = { + .lcd_modes = &lcdc0_mode, + .num_modes = 1, + .panel_cfg = { .width = 152, .height = 91, }, diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb..c8e7ca23fc0 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8..865d56d9629 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -323,8 +318,14 @@ static struct sh_mobile_meram_info mackerel_meram_info = { static struct resource meram_resources[] = { [0] = { - .name = "MERAM", + .name = "regs", .start = 0xe8000000, + .end = 0xe807ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "meram", + .start = 0xe8080000, .end = 0xe81fffff, .flags = IORESOURCE_MEM, }, @@ -356,29 +357,23 @@ static struct fb_videomode mackerel_lcdc_modes[] = { }, }; -static int mackerel_set_brightness(void *board_data, int brightness) +static int mackerel_set_brightness(int brightness) { gpio_set_value(GPIO_PORT31, brightness); return 0; } -static int mackerel_get_brightness(void *board_data) +static int mackerel_get_brightness(void) { return gpio_get_value(GPIO_PORT31); } -static struct sh_mobile_meram_cfg lcd_meram_cfg = { +static const struct sh_mobile_meram_cfg lcd_meram_cfg = { .icb[0] = { - .marker_icb = 28, - .cache_icb = 24, - .meram_offset = 0x0, .meram_size = 0x40, }, .icb[1] = { - .marker_icb = 29, - .cache_icb = 25, - .meram_offset = 0x40, .meram_size = 0x40, }, }; @@ -389,20 +384,20 @@ static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_cfg = mackerel_lcdc_modes, - .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), + .lcd_modes = mackerel_lcdc_modes, + .num_modes = ARRAY_SIZE(mackerel_lcdc_modes), .interface_type = RGB24, .clock_divider = 3, .flags = 0, - .lcd_size_cfg.width = 152, - .lcd_size_cfg.height = 91, - .board_cfg = { - .set_brightness = mackerel_set_brightness, - .get_brightness = mackerel_get_brightness, + .panel_cfg = { + .width = 152, + .height = 91, }, .bl_info = { .name = "sh_mobile_lcdc_bl", .max_brightness = 1, + .set_brightness = mackerel_set_brightness, + .get_brightness = mackerel_get_brightness, }, .meram_cfg = &lcd_meram_cfg, } @@ -431,21 +426,44 @@ static struct platform_device lcdc_device = { }, }; -static struct sh_mobile_meram_cfg hdmi_meram_cfg = { +/* HDMI */ +static struct sh_mobile_hdmi_info hdmi_info = { + .flags = HDMI_SND_SRC_SPDIF, +}; + +static struct resource hdmi_resources[] = { + [0] = { + .name = "HDMI", + .start = 0xe6be0000, + .end = 0xe6be00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ + .start = evt2irq(0x17e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device hdmi_device = { + .name = "sh-mobile-hdmi", + .num_resources = ARRAY_SIZE(hdmi_resources), + .resource = hdmi_resources, + .id = -1, + .dev = { + .platform_data = &hdmi_info, + }, +}; + +static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { .icb[0] = { - .marker_icb = 30, - .cache_icb = 26, - .meram_offset = 0x80, .meram_size = 0x100, }, .icb[1] = { - .marker_icb = 31, - .cache_icb = 27, - .meram_offset = 0x180, .meram_size = 0x100, }, }; -/* HDMI */ + static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_EXTERNAL, @@ -456,6 +474,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, .meram_cfg = &hdmi_meram_cfg, + .tx_dev = &hdmi_device, } }; @@ -483,36 +502,6 @@ static struct platform_device hdmi_lcdc_device = { }, }; -static struct sh_mobile_hdmi_info hdmi_info = { - .lcd_chan = &hdmi_lcdc_info.ch[0], - .lcd_dev = &hdmi_lcdc_device.dev, - .flags = HDMI_SND_SRC_SPDIF, -}; - -static struct resource hdmi_resources[] = { - [0] = { - .name = "HDMI", - .start = 0xe6be0000, - .end = 0xe6be00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ - .start = evt2irq(0x17e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_device = { - .name = "sh-mobile-hdmi", - .num_resources = ARRAY_SIZE(hdmi_resources), - .resource = hdmi_resources, - .id = -1, - .dev = { - .platform_data = &hdmi_info, - }, -}; - static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; @@ -676,51 +665,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +730,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +761,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -901,7 +854,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) return clk_enable(clk); } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; @@ -910,10 +863,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) int ackmd_bpfmd; int ret; - /* FSIA is slave mode. nothing to do here */ - if (is_porta) - return 0; - /* clock start */ switch (rate) { case 44100: @@ -957,14 +906,16 @@ fsi_set_rate_end: } static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | + .port_a = { + .flags = SH_FSI_BRS_INV, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | SH_FSI_BRM_INV | SH_FSI_LRS_INV | SH_FSI_FMT_SPDIF, - - .set_rate = fsi_set_rate, + .set_rate = fsi_b_set_rate, + } }; static struct resource fsi_resources[] = { @@ -1184,15 +1135,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1142,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1311,7 +1254,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1326,8 +1268,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &sh_mmcif_device, &ceu_device, &mackerel_camera, - &hdmi_lcdc_device, &hdmi_device, + &hdmi_lcdc_device, &meram_device, }; @@ -1402,6 +1344,10 @@ static struct map_desc mackerel_io_desc[] __initdata = { static void __init mackerel_map_io(void) { iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); + /* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't + * enough to allocate the frame buffer memory. + */ + init_consistent_dma_size(12 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); @@ -1473,9 +1419,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e1..7727cca6136 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a968..cad57578cee 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e..9857595eaa7 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c..d14c9b04807 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6ac..336093f9210 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a83cf51fc09..cccf91b8fae 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1043,6 +1043,8 @@ void __init sh7372_add_standard_devices(void) sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device); sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device); sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device); + sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device); + sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device); } void __init sh7372_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a34..2d0d4212be4 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a5e46b4ade2..4f7f5182dd4 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -469,7 +469,7 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, if (pmx_driver.base) { ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no" + printk(KERN_ERR "padmux: registration failed. err no" ": %d\n", ret); /* Free Mapping, device selection already done */ iounmap(pmx_driver.base); diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 9004cf9f01b..febaa6fcfb6 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -303,6 +303,6 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + printk(KERN_ERR "padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index ee29bef4307..deaaf199612 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -550,6 +550,6 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + printk(KERN_ERR "padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 373652d76b9..32b420a90c3 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,6 +7,8 @@ config ARCH_TEGRA_2x_SOC select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_TEGRA20 select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT @@ -19,6 +21,8 @@ config ARCH_TEGRA_3x_SOC select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_TEGRA30 select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fcf4f377b1d..330afdfa247 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .uartclk = 216000000, }, { /* serial port on mini-pcie */ - .membase = IO_ADDRESS(TEGRA_UARTD_BASE), - .mapbase = TEGRA_UARTD_BASE, - .irq = INT_UARTD, + .membase = IO_ADDRESS(TEGRA_UARTC_BASE), + .mapbase = TEGRA_UARTC_BASE, + .irq = INT_UARTC, .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, .type = PORT_TEGRA, .iotype = UPIO_MEM, @@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, + { "uartc", "pll_p", 216000000, true }, { "pll_p_out4", "pll_p", 24000000, true }, { "usbd", "clk_m", 12000000, false }, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index ffa83f580db..3c9f8da37ea 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -22,7 +22,7 @@ /* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 /* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 1fa26d9a1a6..ea49bd93c6b 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include <linux/module.h> #include <mach/iomap.h> @@ -58,6 +59,7 @@ unsigned long long tegra_chip_uid(void) hi = fuse_readl(FUSE_UID_HIGH); return (hi << 32ull) | lo; } +EXPORT_SYMBOL(tegra_chip_uid); int tegra_sku_id(void) { diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a..3c9339058be 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include <linux/list.h> -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 20bb0545f99..a1302561293 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -24,20 +24,21 @@ #include <linux/types.h> #include <linux/input/matrix_keypad.h> -#ifdef CONFIG_ARCH_TEGRA_2x_SOC #define KBC_MAX_GPIO 24 #define KBC_MAX_KPENT 8 -#else -#define KBC_MAX_GPIO 20 -#define KBC_MAX_KPENT 7 -#endif #define KBC_MAX_ROW 16 #define KBC_MAX_COL 8 #define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL) +enum tegra_pin_type { + PIN_CFG_IGNORE, + PIN_CFG_COL, + PIN_CFG_ROW, +}; + struct tegra_kbc_pin_cfg { - bool is_row; + enum tegra_pin_type type; unsigned char num; }; diff --git a/arch/arm/mach-tegra/include/mach/pinconf-tegra.h b/arch/arm/mach-tegra/include/mach/pinconf-tegra.h new file mode 100644 index 00000000000..1f24d304921 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/pinconf-tegra.h @@ -0,0 +1,63 @@ +/* + * pinctrl configuration definitions for the NVIDIA Tegra pinmux + * + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __PINCONF_TEGRA_H__ +#define __PINCONF_TEGRA_H__ + +enum tegra_pinconf_param { + /* argument: tegra_pinconf_pull */ + TEGRA_PINCONF_PARAM_PULL, + /* argument: tegra_pinconf_tristate */ + TEGRA_PINCONF_PARAM_TRISTATE, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_ENABLE_INPUT, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_OPEN_DRAIN, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_LOCK, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_IORESET, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_SCHMITT, + /* argument: Boolean */ + TEGRA_PINCONF_PARAM_LOW_POWER_MODE, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, +}; + +enum tegra_pinconf_pull { + TEGRA_PINCONFIG_PULL_NONE, + TEGRA_PINCONFIG_PULL_DOWN, + TEGRA_PINCONFIG_PULL_UP, +}; + +enum tegra_pinconf_tristate { + TEGRA_PINCONFIG_DRIVEN, + TEGRA_PINCONFIG_TRISTATE, +}; + +#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) +#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) +#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) + +#endif diff --git a/arch/arm/mach-tegra/include/mach/smmu.h b/arch/arm/mach-tegra/include/mach/smmu.h new file mode 100644 index 00000000000..dad403a9cf0 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/smmu.h @@ -0,0 +1,63 @@ +/* + * IOMMU API for SMMU in Tegra30 + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef MACH_SMMU_H +#define MACH_SMMU_H + +enum smmu_hwgrp { + HWGRP_AFI, + HWGRP_AVPC, + HWGRP_DC, + HWGRP_DCB, + HWGRP_EPP, + HWGRP_G2, + HWGRP_HC, + HWGRP_HDA, + HWGRP_ISP, + HWGRP_MPE, + HWGRP_NV, + HWGRP_NV2, + HWGRP_PPCS, + HWGRP_SATA, + HWGRP_VDE, + HWGRP_VI, + + HWGRP_COUNT, + + HWGRP_END = ~0, +}; + +#define HWG_AFI (1 << HWGRP_AFI) +#define HWG_AVPC (1 << HWGRP_AVPC) +#define HWG_DC (1 << HWGRP_DC) +#define HWG_DCB (1 << HWGRP_DCB) +#define HWG_EPP (1 << HWGRP_EPP) +#define HWG_G2 (1 << HWGRP_G2) +#define HWG_HC (1 << HWGRP_HC) +#define HWG_HDA (1 << HWGRP_HDA) +#define HWG_ISP (1 << HWGRP_ISP) +#define HWG_MPE (1 << HWGRP_MPE) +#define HWG_NV (1 << HWGRP_NV) +#define HWG_NV2 (1 << HWGRP_NV2) +#define HWG_PPCS (1 << HWGRP_PPCS) +#define HWG_SATA (1 << HWGRP_SATA) +#define HWG_VDE (1 << HWGRP_VDE) +#define HWG_VI (1 << HWGRP_VI) + +#endif /* MACH_SMMU_H */ diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h index d4b8f9e298a..de1a0f602b2 100644 --- a/arch/arm/mach-tegra/include/mach/usb_phy.h +++ b/arch/arm/mach-tegra/include/mach/usb_phy.h @@ -58,7 +58,7 @@ struct tegra_usb_phy { struct clk *pad_clk; enum tegra_usb_phy_mode mode; void *config; - struct otg_transceiver *ulpi; + struct usb_phy *ulpi; }; struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index af8b6343572..14b29ab5d8f 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -408,7 +408,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); /* * IORESOURCE_MEM @@ -427,7 +427,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[1]); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); /* * IORESOURCE_MEM | IORESOURCE_PREFETCH @@ -446,7 +446,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; if (request_resource(&iomem_resource, &pp->res[2])) panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource(&sys->resources, &pp->res[2]); + pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset); return 1; } diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index 37576a721ae..ad321f9e2bb 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -608,13 +608,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) writel(val, base + ULPI_TIMING_CTRL_1); /* Fix VbusInvalid due to floating VBUS */ - ret = otg_io_write(phy->ulpi, 0x40, 0x08); + ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); if (ret) { pr_err("%s: ulpi write failed\n", __func__); return ret; } - ret = otg_io_write(phy->ulpi, 0x80, 0x0B); + ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); if (ret) { pr_err("%s: ulpi write failed\n", __func__); return ret; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700..a7b3f36e226 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -26,7 +26,8 @@ #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <asm/types.h> @@ -1477,7 +1478,7 @@ static struct coh901318_platform coh901318_platform = { .max_channels = U300_DMA_CHANNELS, }; -static struct resource pinmux_resources[] = { +static struct resource pinctrl_resources[] = { { .start = U300_SYSCON_BASE, .end = U300_SYSCON_BASE + SZ_4K - 1, @@ -1506,6 +1507,13 @@ static struct platform_device i2c1_device = { .resource = i2c1_resources, }; +static struct platform_device pinctrl_device = { + .name = "pinctrl-u300", + .id = -1, + .num_resources = ARRAY_SIZE(pinctrl_resources), + .resource = pinctrl_resources, +}; + /* * The different variants have a few different versions of the * GPIO block, with different number of ports. @@ -1525,6 +1533,7 @@ static struct u300_gpio_platform u300_gpio_plat = { #endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, + .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1597,71 +1606,67 @@ static struct platform_device dma_device = { }, }; -static struct platform_device pinmux_device = { - .name = "pinmux-u300", - .id = -1, - .num_resources = ARRAY_SIZE(pinmux_resources), - .resource = pinmux_resources, +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), }; -/* Pinmux settings */ -static struct pinmux_map __initdata u300_pinmux_map[] = { +static unsigned long pin_highz_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0), +}; + +/* Pin control settings */ +static struct pinctrl_map __initdata u300_pinmux_map[] = { /* anonymous maps for chip power and EMIFs */ - PINMUX_MAP_SYS_HOG("POWER", "pinmux-u300", "power"), - PINMUX_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"), - PINMUX_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"), /* per-device maps for MMC/SD, SPI and UART */ - PINMUX_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"), - PINMUX_MAP("SPI", "pinmux-u300", "spi0", "pl022"), - PINMUX_MAP("UART0", "pinmux-u300", "uart0", "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"), + /* This pin is used for clock return rather than GPIO */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11", + pin_pullup_conf), + /* This pin is used for card detect */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS", + pin_highz_conf), }; struct u300_mux_hog { - const char *name; struct device *dev; - struct pinmux *pmx; + struct pinctrl *p; }; static struct u300_mux_hog u300_mux_hogs[] = { { - .name = "uart0", .dev = &uart0_device.dev, }, { - .name = "spi0", .dev = &pl022_device.dev, }, { - .name = "mmc0", .dev = &mmcsd_device.dev, }, }; -static int __init u300_pinmux_fetch(void) +static int __init u300_pinctrl_fetch(void) { int i; for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { - struct pinmux *pmx; - int ret; + struct pinctrl *p; - pmx = pinmux_get(u300_mux_hogs[i].dev, NULL); - if (IS_ERR(pmx)) { - pr_err("u300: could not get pinmux hog %s\n", - u300_mux_hogs[i].name); - continue; - } - ret = pinmux_enable(pmx); - if (ret) { - pr_err("u300: could enable pinmux hog %s\n", - u300_mux_hogs[i].name); + p = pinctrl_get_select_default(u300_mux_hogs[i].dev); + if (IS_ERR(p)) { + pr_err("u300: could not get pinmux hog for dev %s\n", + dev_name(u300_mux_hogs[i].dev)); continue; } - u300_mux_hogs[i].pmx = pmx; + u300_mux_hogs[i].p = p; } return 0; } -subsys_initcall(u300_pinmux_fetch); +subsys_initcall(u300_pinctrl_fetch); /* * Notice that AMBA devices are initialized before platform devices. @@ -1676,7 +1681,6 @@ static struct platform_device *platform_devs[] __initdata = { &gpio_device, &nand_device, &wdog_device, - &pinmux_device, }; /* @@ -1861,8 +1865,8 @@ void __init u300_init_devices(void) u300_assign_physmem(); /* Initialize pinmuxing */ - pinmux_register_mappings(u300_pinmux_map, - ARRAY_SIZE(u300_pinmux_map)); + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); /* Register subdevices on the I2C buses */ u300_i2c_register_board_devices(); diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index 5140deeddf7..a38f80238ea 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -60,7 +60,6 @@ static struct regulator_consumer_supply supply_ldo_c[] = { */ static struct regulator_consumer_supply supply_ldo_d[] = { { - .dev = NULL, .supply = "vana15", /* Powers the SoC (CPU etc) */ }, }; @@ -92,7 +91,6 @@ static struct regulator_consumer_supply supply_ldo_k[] = { */ static struct regulator_consumer_supply supply_ldo_ext[] = { { - .dev = NULL, .supply = "vext", /* External power */ }, }; diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h index bf4c7935aec..e81400c1753 100644 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -24,12 +24,14 @@ enum u300_gpio_variant { * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { enum u300_gpio_variant variant; u8 ports; int gpio_base; int gpio_irq_base; + struct platform_device *pinctrl_device; }; #endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af00446a6..c59e8b892d6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,7 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select ARM_ERRATA_754322 select ARM_ERRATA_764369 diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 02b7b9303f3..008ce22b9a0 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -98,8 +98,11 @@ static const struct of_device_id sic_of_match[] __initconst = { void __init versatile_init_irq(void) { - vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); - irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START); + struct device_node *np; + + np = of_find_matching_node_by_address(NULL, vic_of_match, + VERSATILE_VIC_BASE); + __vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np); writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 90069bce23b..51733b022d0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -219,9 +219,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource(resources, &io_mem); - pci_add_resource(resources, &non_mem); - pci_add_resource(resources, &pre_mem); + pci_add_resource_offset(resources, &io_mem, sys->io_offset); + pci_add_resource_offset(resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(resources, &pre_mem, sys->mem_offset); goto out; diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9b3d0fbaee7..88c3ba151e8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_GIC select ARM_ERRATA_720789 select ARM_ERRATA_751472 - select ARM_ERRATA_753970 + select PL310_ERRATA_753970 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca248816..7edef912163 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 07c4bc8ea0a..a655d3da386 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -54,9 +54,15 @@ loop1: and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) ldr r4, =0x3ff diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index d2852e1635b..d130a5ece5d 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -44,11 +44,11 @@ void fa_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); fa_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } /* @@ -58,7 +58,7 @@ void fa_copy_user_highpage(struct page *to, struct page *from, */ void fa_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile("\ mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ @@ -77,7 +77,7 @@ void fa_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 32) : "r1", "r2", "r3", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns fa_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index ac163de7dc0..49ee0c1a720 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -72,17 +72,17 @@ void feroceon_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); flush_cache_page(vma, vaddr, page_to_pfn(from)); feroceon_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile ("\ mov r1, %2 \n\ mov r2, #0 \n\ @@ -102,7 +102,7 @@ void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 32) : "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns feroceon_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c index f72303e1d80..3935bddd476 100644 --- a/arch/arm/mm/copypage-v3.c +++ b/arch/arm/mm/copypage-v3.c @@ -42,11 +42,11 @@ void v3_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); v3_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } /* @@ -56,7 +56,7 @@ void v3_copy_user_highpage(struct page *to, struct page *from, */ void v3_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile("\n\ mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ @@ -72,7 +72,7 @@ void v3_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 64) : "r1", "r2", "r3", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns v3_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 7d0a8c23034..ec8c3befb9c 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -71,7 +71,7 @@ mc_copy_user_page(void *from, void *to) void v4_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr, struct vm_area_struct *vma) { - void *kto = kmap_atomic(to, KM_USER1); + void *kto = kmap_atomic(to); if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); @@ -85,7 +85,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, raw_spin_unlock(&minicache_lock); - kunmap_atomic(kto, KM_USER1); + kunmap_atomic(kto); } /* @@ -93,7 +93,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, */ void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile("\ mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ @@ -111,7 +111,7 @@ void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 64) : "r1", "r2", "r3", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns v4_mc_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index cb589cbb2b6..067d0fdd630 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -52,12 +52,12 @@ void v4wb_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); flush_cache_page(vma, vaddr, page_to_pfn(from)); v4wb_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } /* @@ -67,7 +67,7 @@ void v4wb_copy_user_highpage(struct page *to, struct page *from, */ void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile("\ mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ @@ -86,7 +86,7 @@ void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 64) : "r1", "r2", "r3", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns v4wb_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 30c7d048a32..b85c5da2e51 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -48,11 +48,11 @@ void v4wt_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); v4wt_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } /* @@ -62,7 +62,7 @@ void v4wt_copy_user_highpage(struct page *to, struct page *from, */ void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile("\ mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ @@ -79,7 +79,7 @@ void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 64) : "r1", "r2", "r3", "ip", "lr"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns v4wt_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 3d9a1552cef..8b03a5814d0 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -38,11 +38,11 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, { void *kto, *kfrom; - kfrom = kmap_atomic(from, KM_USER0); - kto = kmap_atomic(to, KM_USER1); + kfrom = kmap_atomic(from); + kto = kmap_atomic(to); copy_page(kto, kfrom); - kunmap_atomic(kto, KM_USER1); - kunmap_atomic(kfrom, KM_USER0); + kunmap_atomic(kto); + kunmap_atomic(kfrom); } /* @@ -51,9 +51,9 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, */ static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr) { - void *kaddr = kmap_atomic(page, KM_USER0); + void *kaddr = kmap_atomic(page); clear_page(kaddr); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } /* diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index f9cde0702f1..03a2042aced 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -75,12 +75,12 @@ void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto, *kfrom; - kto = kmap_atomic(to, KM_USER0); - kfrom = kmap_atomic(from, KM_USER1); + kto = kmap_atomic(to); + kfrom = kmap_atomic(from); flush_cache_page(vma, vaddr, page_to_pfn(from)); xsc3_mc_copy_user_page(kto, kfrom); - kunmap_atomic(kfrom, KM_USER1); - kunmap_atomic(kto, KM_USER0); + kunmap_atomic(kfrom); + kunmap_atomic(kto); } /* @@ -90,7 +90,7 @@ void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, */ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile ("\ mov r1, %2 \n\ mov r2, #0 \n\ @@ -105,7 +105,7 @@ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 32) : "r1", "r2", "r3"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns xsc3_mc_user_fns __initdata = { diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 610c24ced31..439d106ae63 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -93,7 +93,7 @@ mc_copy_user_page(void *from, void *to) void xscale_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr, struct vm_area_struct *vma) { - void *kto = kmap_atomic(to, KM_USER1); + void *kto = kmap_atomic(to); if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); @@ -107,7 +107,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, raw_spin_unlock(&minicache_lock); - kunmap_atomic(kto, KM_USER1); + kunmap_atomic(kto); } /* @@ -116,7 +116,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, void xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { - void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + void *ptr, *kaddr = kmap_atomic(page); asm volatile( "mov r1, %2 \n\ mov r2, #0 \n\ @@ -133,7 +133,7 @@ xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr) : "=r" (ptr) : "0" (kaddr), "I" (PAGE_SIZE / 32) : "r1", "r2", "r3", "ip"); - kunmap_atomic(kaddr, KM_USER0); + kunmap_atomic(kaddr); } struct cpu_user_fns xscale_mc_user_fns __initdata = { diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 807c0573abb..5a21505d755 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -36,7 +36,7 @@ void kunmap(struct page *page) } EXPORT_SYMBOL(kunmap); -void *__kmap_atomic(struct page *page) +void *kmap_atomic(struct page *page) { unsigned int idx; unsigned long vaddr; @@ -81,7 +81,7 @@ void *__kmap_atomic(struct page *page) return (void *)vaddr; } -EXPORT_SYMBOL(__kmap_atomic); +EXPORT_SYMBOL(kmap_atomic); void __kunmap_atomic(void *kvaddr) { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5dc7d127a40..245a55a0a5b 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/memblock.h> #include "mm.h" diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index e62956e1203..4614208369f 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -32,9 +32,6 @@ EXPORT_SYMBOL(pcibios_min_io); unsigned long pcibios_min_mem = 0x01000000; EXPORT_SYMBOL(pcibios_min_mem); -unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC; -EXPORT_SYMBOL(pci_flags); - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { if ((unsigned long)addr >= VMALLOC_START && diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0404ccbb8aa..f1c8486f750 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -230,9 +230,7 @@ __v7_setup: mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 - teq r6, #0x20 @ present in r2p0 - teqne r6, #0x21 @ present in r2p1 - teqne r6, #0x22 @ present in r2p2 + teq r5, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index f4d40a27111..72768356447 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -215,8 +215,8 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - pci_add_resource(&sys->resources, &res[0]); - pci_add_resource(&sys->resources, &res[1]); + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index f0ba0726306..d1e31fa1b0c 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -16,6 +16,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <mach/hardware.h> @@ -148,6 +150,11 @@ static struct irq_chip expio_irq_chip = { .irq_unmask = expio_unmask_irq, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + int __init mxc_expio_init(u32 base, u32 p_irq) { int i; @@ -188,6 +195,8 @@ int __init mxc_expio_init(u32 base, u32 p_irq) irq_set_chained_handler(p_irq, mxc_expio_irq_handler); /* Register Lan device on the debugboard */ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; platform_device_register(&smsc_lan9217_device); diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index dcebb1230f7..c722f9ce691 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -88,12 +88,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config ARCH_MXC_AUDMUX_V1 - bool - -config ARCH_MXC_AUDMUX_V2 - bool - config IRAM_ALLOC bool select GENERIC_ALLOCATOR diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 076db84f3e3..e81290c27c6 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -14,8 +14,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c deleted file mode 100644 index 1180bef7664..00000000000 --- a/arch/arm/plat-mxc/audmux-v1.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static void __iomem *audmux_base; - -static unsigned char port_mapping[] = { - 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, -}; - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) -{ - if (!audmux_base) { - printk("%s: not configured\n", __func__); - return -ENOSYS; - } - - if (port >= ARRAY_SIZE(port_mapping)) - return -EINVAL; - - writel(pcr, audmux_base + port_mapping[port]); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); - -static int mxc_audmux_v1_init(void) -{ -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); - else -#endif - (void)0; - - return 0; -} - -postcore_initcall(mxc_audmux_v1_init); diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c deleted file mode 100644 index 8cced35009b..00000000000 --- a/arch/arm/plat-mxc/audmux-v2.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/debugfs.h> -#include <linux/slab.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static struct clk *audmux_clk; -static void __iomem *audmux_base; - -#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) -#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) - -#ifdef CONFIG_DEBUG_FS -static struct dentry *audmux_debugfs_root; - -static int audmux_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -/* There is an annoying discontinuity in the SSI numbering with regard - * to the Linux number of the devices */ -static const char *audmux_port_string(int port) -{ - switch (port) { - case MX31_AUDMUX_PORT1_SSI0: - return "imx-ssi.0"; - case MX31_AUDMUX_PORT2_SSI1: - return "imx-ssi.1"; - case MX31_AUDMUX_PORT3_SSI_PINS_3: - return "SSI3"; - case MX31_AUDMUX_PORT4_SSI_PINS_4: - return "SSI4"; - case MX31_AUDMUX_PORT5_SSI_PINS_5: - return "SSI5"; - case MX31_AUDMUX_PORT6_SSI_PINS_6: - return "SSI6"; - default: - return "UNKNOWN"; - } -} - -static ssize_t audmux_read_file(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - ssize_t ret; - char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); - int port = (int)file->private_data; - u32 pdcr, ptcr; - - if (!buf) - return -ENOMEM; - - if (audmux_clk) - clk_enable(audmux_clk); - - ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); - pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", - pdcr, ptcr); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS output from %s, ", - audmux_port_string((ptcr >> 27) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk output from %s", - audmux_port_string((ptcr >> 22) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk input"); - - ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); - - if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) { - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "Port is symmetric"); - } else { - if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS output from %s, ", - audmux_port_string((ptcr >> 17) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk output from %s", - audmux_port_string((ptcr >> 12) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk input"); - } - - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "\nData received from %s\n", - audmux_port_string((pdcr >> 13) & 0x7)); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); - - kfree(buf); - - return ret; -} - -static const struct file_operations audmux_debugfs_fops = { - .open = audmux_open_file, - .read = audmux_read_file, - .llseek = default_llseek, -}; - -static void audmux_debugfs_init(void) -{ - int i; - char buf[20]; - - audmux_debugfs_root = debugfs_create_dir("audmux", NULL); - if (!audmux_debugfs_root) { - pr_warning("Failed to create AUDMUX debugfs root\n"); - return; - } - - for (i = 1; i < 8; i++) { - snprintf(buf, sizeof(buf), "ssi%d", i); - if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, - (void *)i, &audmux_debugfs_fops)) - pr_warning("Failed to create AUDMUX port %d debugfs file\n", - i); - } -} -#else -static inline void audmux_debugfs_init(void) -{ -} -#endif - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr) -{ - if (!audmux_base) - return -ENOSYS; - - if (audmux_clk) - clk_enable(audmux_clk); - - writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port)); - writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); - -static int mxc_audmux_v2_init(void) -{ - int ret; - if (cpu_is_mx51()) { - audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx31()) { - audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx35()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx25()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); - } - - audmux_debugfs_init(); - - return 0; -} - -postcore_initcall(mxc_audmux_v2_init); diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c index b3f4828dc44..11eace953a0 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c +++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c @@ -62,3 +62,21 @@ struct platform_device *__init imx_add_mx2_camera( res, data->iobaseemmaprp ? 4 : 2, pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data) +{ + struct resource res[] = { + { + .start = data->iobaseemmaprp, + .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqemmaprp, + .end = data->irqemmaprp, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h deleted file mode 100644 index 6fda788ed0e..00000000000 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __MACH_AUDMUX_H -#define __MACH_AUDMUX_H - -#define MX27_AUDMUX_HPCR1_SSI0 0 -#define MX27_AUDMUX_HPCR2_SSI1 1 -#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 -#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 -#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 -#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 - -#define MX31_AUDMUX_PORT1_SSI0 0 -#define MX31_AUDMUX_PORT2_SSI1 1 -#define MX31_AUDMUX_PORT3_SSI_PINS_3 2 -#define MX31_AUDMUX_PORT4_SSI_PINS_4 3 -#define MX31_AUDMUX_PORT5_SSI_PINS_5 4 -#define MX31_AUDMUX_PORT6_SSI_PINS_6 5 - -#define MX51_AUDMUX_PORT1_SSI0 0 -#define MX51_AUDMUX_PORT2_SSI1 1 -#define MX51_AUDMUX_PORT3 2 -#define MX51_AUDMUX_PORT4 3 -#define MX51_AUDMUX_PORT5 4 -#define MX51_AUDMUX_PORT6 5 -#define MX51_AUDMUX_PORT7 6 - -/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) -#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) -#define MXC_AUDMUX_V1_PCR_TXRXEN (1 << 10) -#define MXC_AUDMUX_V1_PCR_SYN (1 << 12) -#define MXC_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) -#define MXC_AUDMUX_V1_PCR_RCLKDIR (1 << 24) -#define MXC_AUDMUX_V1_PCR_RFSDIR (1 << 25) -#define MXC_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) -#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) -#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) - -/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) -#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) -#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) -#define MXC_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) -#define MXC_AUDMUX_V2_PTCR_RFSDIR (1 << 21) -#define MXC_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) -#define MXC_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) -#define MXC_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) -#define MXC_AUDMUX_V2_PTCR_SYN (1 << 11) - -#define MXC_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V2_PDCR_TXRXEN (1 << 12) -#define MXC_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) -#define MXC_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr); - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr); - -#endif /* __MACH_AUDMUX_H */ diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index def9ba53e23..1b2258daa05 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -223,6 +223,8 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_camera_data *data); #include <mach/mxc_ehci.h> struct imx_mxc_ehci_data { diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 2c159dc2398..9ffd1bbe615 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -44,7 +44,7 @@ struct mxc_usbh_platform_data { int (*exit)(struct platform_device *pdev); unsigned int portsc; - struct otg_transceiver *otg; + struct usb_phy *otg; }; int mx51_initialize_usb_hw(int port, unsigned int flags); diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h index f9161c96d7b..42bdaca6d7d 100644 --- a/arch/arm/plat-mxc/include/mach/ulpi.h +++ b/arch/arm/plat-mxc/include/mach/ulpi.h @@ -2,15 +2,15 @@ #define __MACH_ULPI_H #ifdef CONFIG_USB_ULPI -struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags); +struct usb_phy *imx_otg_ulpi_create(unsigned int flags); #else -static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags) +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) { return NULL; } #endif -extern struct otg_io_access_ops mxc_ulpi_access_ops; +extern struct usb_phy_io_ops mxc_ulpi_access_ops; #endif /* __MACH_ULPI_H */ diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c index 477e45bea1b..d2963427184 100644 --- a/arch/arm/plat-mxc/ulpi.c +++ b/arch/arm/plat-mxc/ulpi.c @@ -58,7 +58,7 @@ static int ulpi_poll(void __iomem *view, u32 bit) return -ETIMEDOUT; } -static int ulpi_read(struct otg_transceiver *otg, u32 reg) +static int ulpi_read(struct usb_phy *otg, u32 reg) { int ret; void __iomem *view = otg->io_priv; @@ -84,7 +84,7 @@ static int ulpi_read(struct otg_transceiver *otg, u32 reg) return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; } -static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) +static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg) { int ret; void __iomem *view = otg->io_priv; @@ -106,13 +106,13 @@ static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) return ulpi_poll(view, ULPIVW_RUN); } -struct otg_io_access_ops mxc_ulpi_access_ops = { +struct usb_phy_io_ops mxc_ulpi_access_ops = { .read = ulpi_read, .write = ulpi_write, }; EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); -struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags) +struct usb_phy *imx_otg_ulpi_create(unsigned int flags) { return otg_ulpi_create(&mxc_ulpi_access_ops, flags); } diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index aa59f4247dc..8f81503a4df 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -110,14 +110,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MCBSP - bool "McBSP support" - depends on ARCH_OMAP - default y - help - Say Y here if you want support for the OMAP Multichannel - Buffered Serial Port. - config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9a584614e7e..c0fe2757b69 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,8 +17,6 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o obj-$(CONFIG_ARCH_OMAP4) += omap_device.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o - obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e65..f1e46ea6b81 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/dma-mapping.h> -#include <linux/omapfb.h> #include <plat/common.h> #include <plat/board.h> @@ -65,10 +64,10 @@ const void *__init omap_get_var_config(u16 tag, size_t *len) void __init omap_reserve(void) { - omapfb_reserve_sdram_memblock(); omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index c9e5d7298c4..dd6f92c99e5 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -34,15 +34,11 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/sram.h> - -#include "fb.h" #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) +static bool omapfb_lcd_configured; static struct omapfb_platform_data omapfb_config; -static int config_invalid; -static int configured_regions; static u64 omap_fb_dma_mask = ~(u32)0; @@ -57,302 +53,21 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ -} - -static inline int ranges_overlap(unsigned long start1, unsigned long size1, - unsigned long start2, unsigned long size2) -{ - return (start1 >= start2 && start1 < start2 + size2) || - (start2 >= start1 && start2 < start1 + size1); -} - -static inline int range_included(unsigned long start1, unsigned long size1, - unsigned long start2, unsigned long size2) -{ - return start1 >= start2 && start1 + size1 <= start2 + size2; -} - - -/* Check if there is an overlapping region. */ -static int fbmem_region_reserved(unsigned long start, size_t size) -{ - struct omapfb_mem_region *rg; - int i; - - rg = &omapfb_config.mem_desc.region[0]; - for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) { - if (!rg->paddr) - /* Empty slot. */ - continue; - if (ranges_overlap(start, size, rg->paddr, rg->size)) - return 1; - } - return 0; -} - -/* - * Get the region_idx`th region from board config/ATAG and convert it to - * our internal format. - */ -static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg) +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) { - const struct omap_fbmem_config *conf; - u32 paddr; - - conf = omap_get_nr_config(OMAP_TAG_FBMEM, - struct omap_fbmem_config, region_idx); - if (conf == NULL) - return -ENOENT; - - paddr = conf->start; - /* - * Low bits encode the page allocation mode, if high bits - * are zero. Otherwise we need a page aligned fixed - * address. - */ - memset(rg, 0, sizeof(*rg)); - rg->type = paddr & ~PAGE_MASK; - rg->paddr = paddr & PAGE_MASK; - rg->size = PAGE_ALIGN(conf->size); - return 0; + omapfb_config.lcd = *config; + omapfb_lcd_configured = true; } -static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type, - unsigned long mem_start, - unsigned long mem_size) -{ - /* - * Check if the configuration specifies the type explicitly. - * type = 0 && paddr = 0, a default don't care case maps to - * the SDRAM type. - */ - if (rg->type || !rg->paddr) - return 0; - if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) { - rg->type = mem_type; - return 0; - } - /* Can't determine it. */ - return -1; -} - -static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, - unsigned long start_avail, unsigned size_avail) +static int __init omap_init_fb(void) { - unsigned long paddr = rg->paddr; - size_t size = rg->size; - - if (rg->type > OMAPFB_MEMTYPE_MAX) { - printk(KERN_ERR - "Invalid start address for FB region %d\n", region_idx); - return -EINVAL; - } - - if (!rg->size) { - printk(KERN_ERR "Zero size for FB region %d\n", region_idx); - return -EINVAL; - } - - if (!paddr) - /* Allocate this dynamically, leave paddr 0 for now. */ - return 0; - /* - * Fixed region for the given RAM range. Check if it's already - * reserved by the FB code or someone else. + * If the board file has not set the lcd config with + * omapfb_set_lcd_config(), don't bother registering the omapfb device */ - if (fbmem_region_reserved(paddr, size) || - !range_included(paddr, size, start_avail, size_avail)) { - printk(KERN_ERR "Trying to use reserved memory " - "for FB region %d\n", region_idx); - return -EINVAL; - } - - return 0; -} - -static int valid_sdram(unsigned long addr, unsigned long size) -{ - return memblock_is_region_memory(addr, size); -} - -static int reserve_sdram(unsigned long addr, unsigned long size) -{ - if (memblock_is_region_reserved(addr, size)) - return -EBUSY; - if (memblock_reserve(addr, size)) - return -ENOMEM; - return 0; -} - -/* - * Called from map_io. We need to call to this early enough so that we - * can reserve the fixed SDRAM regions before VM could get hold of them. - */ -void __init omapfb_reserve_sdram_memblock(void) -{ - unsigned long reserved = 0; - int i; - - if (config_invalid) - return; - - for (i = 0; ; i++) { - struct omapfb_mem_region rg; - - if (get_fbmem_region(i, &rg) < 0) - break; - - if (i == OMAPFB_PLANE_NUM) { - pr_err("Extraneous FB mem configuration entries\n"); - config_invalid = 1; - return; - } - - /* Check if it's our memory type. */ - if (rg.type != OMAPFB_MEMTYPE_SDRAM) - continue; - - /* Check if the region falls within SDRAM */ - if (rg.paddr && !valid_sdram(rg.paddr, rg.size)) - continue; - - if (rg.size == 0) { - pr_err("Zero size for FB region %d\n", i); - config_invalid = 1; - return; - } - - if (rg.paddr) { - if (reserve_sdram(rg.paddr, rg.size)) { - pr_err("Trying to use reserved memory for FB region %d\n", - i); - config_invalid = 1; - return; - } - reserved += rg.size; - } - - if (omapfb_config.mem_desc.region[i].size) { - pr_err("FB region %d already set\n", i); - config_invalid = 1; - return; - } - - omapfb_config.mem_desc.region[i] = rg; - configured_regions++; - } - omapfb_config.mem_desc.region_cnt = i; - if (reserved) - pr_info("Reserving %lu bytes SDRAM for frame buffer\n", - reserved); -} - -/* - * Called at sram init time, before anything is pushed to the SRAM stack. - * Because of the stack scheme, we will allocate everything from the - * start of the lowest address region to the end of SRAM. This will also - * include padding for page alignment and possible holes between regions. - * - * As opposed to the SDRAM case, we'll also do any dynamic allocations at - * this point, since the driver built as a module would have problem with - * freeing / reallocating the regions. - */ -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail) -{ - struct omapfb_mem_region rg; - unsigned long pend_avail; - unsigned long reserved; - int i; - - if (config_invalid) + if (!omapfb_lcd_configured) return 0; - reserved = 0; - pend_avail = pstart_avail + size_avail; - for (i = 0; ; i++) { - if (get_fbmem_region(i, &rg) < 0) - break; - if (i == OMAPFB_PLANE_NUM) { - printk(KERN_ERR - "Extraneous FB mem configuration entries\n"); - config_invalid = 1; - return 0; - } - - /* Check if it's our memory type. */ - if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM, - sram_pstart, sram_size) < 0 || - (rg.type != OMAPFB_MEMTYPE_SRAM)) - continue; - BUG_ON(omapfb_config.mem_desc.region[i].size); - - if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) { - config_invalid = 1; - return 0; - } - - if (!rg.paddr) { - /* Dynamic allocation */ - if ((size_avail & PAGE_MASK) < rg.size) { - printk("Not enough SRAM for FB region %d\n", - i); - config_invalid = 1; - return 0; - } - size_avail = (size_avail - rg.size) & PAGE_MASK; - rg.paddr = pstart_avail + size_avail; - } - /* Reserve everything above the start of the region. */ - if (pend_avail - rg.paddr > reserved) - reserved = pend_avail - rg.paddr; - size_avail = pend_avail - reserved - pstart_avail; - - /* - * We have a kernel mapping for this already, so the - * driver won't have to make one. - */ - rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart); - omapfb_config.mem_desc.region[i] = rg; - configured_regions++; - } - omapfb_config.mem_desc.region_cnt = i; - if (reserved) - pr_info("Reserving %lu bytes SRAM for frame buffer\n", - reserved); - return reserved; -} - -void omapfb_set_ctrl_platform_data(void *data) -{ - omapfb_config.ctrl_platform_data = data; -} - -static int __init omap_init_fb(void) -{ - const struct omap_lcd_config *conf; - - if (config_invalid) - return 0; - if (configured_regions != omapfb_config.mem_desc.region_cnt) { - printk(KERN_ERR "Invalid FB mem configuration entries\n"); - return 0; - } - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf == NULL) { - if (configured_regions) - /* FB mem config, but no LCD config? */ - printk(KERN_ERR "Missing LCD configuration\n"); - return 0; - } - omapfb_config.lcd = *conf; - return platform_device_register(&omap_fb_device); } @@ -374,11 +89,6 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ - omapfb_config = *data; -} - static int __init omap_init_fb(void) { return platform_device_register(&omap_fb_device); @@ -386,36 +96,10 @@ static int __init omap_init_fb(void) arch_initcall(omap_init_fb); -void omapfb_reserve_sdram_memblock(void) -{ -} - -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long start_avail, - unsigned long size_avail) -{ - return 0; -} - #else -void omapfb_set_platform_data(struct omapfb_platform_data *data) -{ -} - -void omapfb_reserve_sdram_memblock(void) -{ -} - -unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long start_avail, - unsigned long size_avail) +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) { - return 0; } #endif diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h deleted file mode 100644 index d765d0bd852..00000000000 --- a/arch/arm/plat-omap/fb.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __PLAT_OMAP_FB_H__ -#define __PLAT_OMAP_FB_H__ - -extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); - -#endif /* __PLAT_OMAP_FB_H__ */ diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h deleted file mode 100644 index 56e7f2e7d12..00000000000 --- a/arch/arm/plat-omap/include/plat/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 97126dfd288..d5eb4c87db9 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -28,9 +28,7 @@ enum { /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_LCD 0x4f05 #define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_FBMEM 0x4f08 #define OMAP_TAG_STI_CONSOLE 0x4f09 #define OMAP_TAG_CAMERA_SENSOR 0x4f0a diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h deleted file mode 100644 index 886248d32b4..00000000000 --- a/arch/arm/plat-omap/include/plat/hwa742.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce..37bbbbb981b 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 8fa74e2c9d6..18814127809 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -27,271 +27,10 @@ #include <linux/spinlock.h> #include <linux/clk.h> -/* macro for building platform_device for McBSP ports */ -#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ -static struct platform_device omap_mcbsp##port_nr = { \ - .name = "omap-mcbsp-dai", \ - .id = port_nr - 1, \ -} - #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -/* McBSP register numbers. Register address offset = num * reg_step */ -enum { - /* Common registers */ - OMAP_MCBSP_REG_SPCR2 = 4, - OMAP_MCBSP_REG_SPCR1, - OMAP_MCBSP_REG_RCR2, - OMAP_MCBSP_REG_RCR1, - OMAP_MCBSP_REG_XCR2, - OMAP_MCBSP_REG_XCR1, - OMAP_MCBSP_REG_SRGR2, - OMAP_MCBSP_REG_SRGR1, - OMAP_MCBSP_REG_MCR2, - OMAP_MCBSP_REG_MCR1, - OMAP_MCBSP_REG_RCERA, - OMAP_MCBSP_REG_RCERB, - OMAP_MCBSP_REG_XCERA, - OMAP_MCBSP_REG_XCERB, - OMAP_MCBSP_REG_PCR0, - OMAP_MCBSP_REG_RCERC, - OMAP_MCBSP_REG_RCERD, - OMAP_MCBSP_REG_XCERC, - OMAP_MCBSP_REG_XCERD, - OMAP_MCBSP_REG_RCERE, - OMAP_MCBSP_REG_RCERF, - OMAP_MCBSP_REG_XCERE, - OMAP_MCBSP_REG_XCERF, - OMAP_MCBSP_REG_RCERG, - OMAP_MCBSP_REG_RCERH, - OMAP_MCBSP_REG_XCERG, - OMAP_MCBSP_REG_XCERH, - - /* OMAP1-OMAP2420 registers */ - OMAP_MCBSP_REG_DRR2 = 0, - OMAP_MCBSP_REG_DRR1, - OMAP_MCBSP_REG_DXR2, - OMAP_MCBSP_REG_DXR1, - - /* OMAP2430 and onwards */ - OMAP_MCBSP_REG_DRR = 0, - OMAP_MCBSP_REG_DXR = 2, - OMAP_MCBSP_REG_SYSCON = 35, - OMAP_MCBSP_REG_THRSH2, - OMAP_MCBSP_REG_THRSH1, - OMAP_MCBSP_REG_IRQST = 40, - OMAP_MCBSP_REG_IRQEN, - OMAP_MCBSP_REG_WAKEUPEN, - OMAP_MCBSP_REG_XCCR, - OMAP_MCBSP_REG_RCCR, - OMAP_MCBSP_REG_XBUFFSTAT, - OMAP_MCBSP_REG_RBUFFSTAT, - OMAP_MCBSP_REG_SSELCR, -}; - -/* OMAP3 sidetone control registers */ -#define OMAP_ST_REG_REV 0x00 -#define OMAP_ST_REG_SYSCONFIG 0x10 -#define OMAP_ST_REG_IRQSTATUS 0x18 -#define OMAP_ST_REG_IRQENABLE 0x1C -#define OMAP_ST_REG_SGAINCR 0x24 -#define OMAP_ST_REG_SFIRCR 0x28 -#define OMAP_ST_REG_SSELCR 0x2C - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define ALB 0x8000 -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/*********************** McBSP XCCR bit definitions *************************/ -#define EXTCLKGATE 0x8000 -#define PPCONNECT 0x4000 -#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ -#define XFULL_CYCLE 0x0800 -#define DILB 0x0020 -#define XDMAEN 0x0008 -#define XDISABLE 0x0001 - -/********************** McBSP RCCR bit definitions *************************/ -#define RFULL_CYCLE 0x0800 -#define RDMAEN 0x0008 -#define RDISABLE 0x0001 - -/********************** McBSP SYSCONFIG bit definitions ********************/ -#define CLOCKACTIVITY(value) ((value)<<8) -#define SIDLEMODE(value) ((value)<<3) -#define ENAWAKEUP 0x0004 -#define SOFTRST 0x0002 - -/********************** McBSP SSELCR bit definitions ***********************/ -#define SIDETONEEN 0x0400 - -/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/ -#define ST_AUTOIDLE 0x0001 - -/********************** McBSP Sidetone SGAINCR bit definitions *************/ -#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */ -#define ST_CH0GAIN(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SFIRCR bit definitions **************/ -#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SSELCR bit definitions **************/ -#define ST_COEFFWRDONE 0x0004 -#define ST_COEFFWREN 0x0002 -#define ST_SIDETONEEN 0x0001 - -/********************** McBSP DMA operating modes **************************/ -#define MCBSP_DMA_MODE_ELEMENT 0 -#define MCBSP_DMA_MODE_THRESHOLD 1 -#define MCBSP_DMA_MODE_FRAME 2 - -/********************** McBSP WAKEUPEN bit definitions *********************/ -#define XEMPTYEOFEN 0x4000 -#define XRDYEN 0x0400 -#define XEOFEN 0x0200 -#define XFSXEN 0x0100 -#define XSYNCERREN 0x0080 -#define RRDYEN 0x0008 -#define REOFEN 0x0004 -#define RFSREN 0x0002 -#define RSYNCERREN 0x0001 - -/* CLKR signal muxing options */ -#define CLKR_SRC_CLKR 0 -#define CLKR_SRC_CLKX 1 - -/* FSR signal muxing options */ -#define FSR_SRC_FSR 0 -#define FSR_SRC_FSX 1 - -/* McBSP functional clock sources */ -#define MCBSP_CLKS_PRCM_SRC 0 -#define MCBSP_CLKS_PAD_SRC 1 - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; - u16 xccr; - u16 rccr; -}; - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -312,43 +51,6 @@ struct omap_mcbsp_platform_data { int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; -struct omap_mcbsp_st_data { - void __iomem *io_base_st; - bool running; - bool enabled; - s16 taps[128]; /* Sidetone filter coefficients */ - int nr_taps; /* Number of filter coefficients in use */ - s16 ch0gain; - s16 ch1gain; -}; - -struct omap_mcbsp { - struct device *dev; - unsigned long phys_base; - unsigned long phys_dma_base; - void __iomem *io_base; - u8 id; - u8 free; - - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - u8 dma_tx_sync; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *fclk; - struct omap_mcbsp_st_data *st_data; - int dma_op_mode; - u16 max_tx_thres; - u16 max_rx_thres; - void *reg_cache; - int reg_cache_size; -}; - /** * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod * @sidetone: name of the sidetone device @@ -357,39 +59,4 @@ struct omap_mcbsp_dev_attr { const char *sidetone; }; -extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count; - -int omap_mcbsp_init(void); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); -u16 omap_mcbsp_get_fifo_size(unsigned int id); -u16 omap_mcbsp_get_tx_delay(unsigned int id); -u16 omap_mcbsp_get_rx_delay(unsigned int id); -int omap_mcbsp_get_dma_op_mode(unsigned int id); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id, int tx, int rx); -void omap_mcbsp_stop(unsigned int id, int tx, int rx); - -/* McBSP functional clock source changing function */ -extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); - -/* McBSP signal muxing API */ -void omap2_mcbsp1_mux_clkr_src(u8 mux); -void omap2_mcbsp1_mux_fsr_src(u8 mux); - -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); - -/* Sidetone specific API */ -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); -int omap_st_enable(unsigned int id); -int omap_st_disable(unsigned int id); -int omap_st_is_enabled(unsigned int id); - #endif diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1b..8c7994ce986 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,11 +3,17 @@ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); #else static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 9fe6c878323..8ad0a377a54 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -1,15 +1,6 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#include <linux/input/matrix_keypad.h> - -struct omap4_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - u8 rows; - u8 cols; -}; - extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h index 0aa4ecd12c7..4d65b7d06e6 100644 --- a/arch/arm/plat-omap/include/plat/vram.h +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -23,40 +23,21 @@ #include <linux/types.h> -#define OMAP_VRAM_MEMTYPE_SDRAM 0 -#define OMAP_VRAM_MEMTYPE_SRAM 1 -#define OMAP_VRAM_MEMTYPE_MAX 1 - extern int omap_vram_add_region(unsigned long paddr, size_t size); extern int omap_vram_free(unsigned long paddr, size_t size); -extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_alloc(size_t size, unsigned long *paddr); extern int omap_vram_reserve(unsigned long paddr, size_t size); extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, unsigned long *largest_free_block); #ifdef CONFIG_OMAP2_VRAM extern void omap_vram_set_sdram_vram(u32 size, u32 start); -extern void omap_vram_set_sram_vram(u32 size, u32 start); extern void omap_vram_reserve_sdram_memblock(void); -extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); #else static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } -static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } static inline void omap_vram_reserve_sdram_memblock(void) { } -static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail) -{ - return 0; -} #endif #endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c deleted file mode 100644 index 4b15cd7926d..00000000000 --- a/arch/arm/plat-omap/mcbsp.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* - * linux/arch/arm/plat-omap/mcbsp.c - * - * Copyright (C) 2004 Nokia Corporation - * Author: Samuel Ortiz <samuel.ortiz@nokia.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Multichannel mode not supported. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <plat/mcbsp.h> -#include <linux/pm_runtime.h> - -struct omap_mcbsp **mcbsp_ptr; -int omap_mcbsp_count; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; - -static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; - __raw_writew((u16)val, addr); - } else { - ((u32 *)mcbsp->reg_cache)[reg] = val; - __raw_writel(val, addr); - } -} - -static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - return !from_cache ? __raw_readw(addr) : - ((u16 *)mcbsp->reg_cache)[reg]; - } else { - return !from_cache ? __raw_readl(addr) : - ((u32 *)mcbsp->reg_cache)[reg]; - } -} - -static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - __raw_writel(val, mcbsp->st_data->io_base_st + reg); -} - -static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) -{ - return __raw_readl(mcbsp->st_data->io_base_st + reg); -} - -#define MCBSP_READ(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) -#define MCBSP_WRITE(mcbsp, reg, val) \ - omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val) -#define MCBSP_READ_CACHE(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1) - -#define MCBSP_ST_READ(mcbsp, reg) \ - omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg) -#define MCBSP_ST_WRITE(mcbsp, reg, val) \ - omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val) - -static void omap_mcbsp_dump_reg(u8 id) -{ - struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); - dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", - MCBSP_READ(mcbsp, DRR2)); - dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", - MCBSP_READ(mcbsp, DRR1)); - dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", - MCBSP_READ(mcbsp, DXR2)); - dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", - MCBSP_READ(mcbsp, DXR1)); - dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR2)); - dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR1)); - dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", - MCBSP_READ(mcbsp, RCR2)); - dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", - MCBSP_READ(mcbsp, RCR1)); - dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", - MCBSP_READ(mcbsp, XCR2)); - dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", - MCBSP_READ(mcbsp, XCR1)); - dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR2)); - dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR1)); - dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", - MCBSP_READ(mcbsp, PCR0)); - dev_dbg(mcbsp->dev, "***********************\n"); -} - -static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_tx = dev_id; - u16 irqst_spcr2; - - irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2); - dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); - - if (irqst_spcr2 & XSYNC_ERR) { - dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", - irqst_spcr2); - /* Writing zero to XSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); - } - - return IRQ_HANDLED; -} - -static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_rx = dev_id; - u16 irqst_spcr1; - - irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1); - dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); - - if (irqst_spcr1 & RSYNC_ERR) { - dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", - irqst_spcr1); - /* Writing zero to RSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); - } - - return IRQ_HANDLED; -} - -/* - * omap_mcbsp_config simply write a config to the - * appropriate McBSP. - * You either call this function or set the McBSP registers - * by yourself before calling omap_mcbsp_start(). - */ -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", - mcbsp->id, mcbsp->phys_base); - - /* We write the given config */ - MCBSP_WRITE(mcbsp, SPCR2, config->spcr2); - MCBSP_WRITE(mcbsp, SPCR1, config->spcr1); - MCBSP_WRITE(mcbsp, RCR2, config->rcr2); - MCBSP_WRITE(mcbsp, RCR1, config->rcr1); - MCBSP_WRITE(mcbsp, XCR2, config->xcr2); - MCBSP_WRITE(mcbsp, XCR1, config->xcr1); - MCBSP_WRITE(mcbsp, SRGR2, config->srgr2); - MCBSP_WRITE(mcbsp, SRGR1, config->srgr1); - MCBSP_WRITE(mcbsp, MCR2, config->mcr2); - MCBSP_WRITE(mcbsp, MCR1, config->mcr1); - MCBSP_WRITE(mcbsp, PCR0, config->pcr0); - if (mcbsp->pdata->has_ccr) { - MCBSP_WRITE(mcbsp, XCCR, config->xccr); - MCBSP_WRITE(mcbsp, RCCR, config->rccr); - } -} -EXPORT_SYMBOL(omap_mcbsp_config); - -/** - * omap_mcbsp_dma_params - returns the dma channel number - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the dma channel number for the rx channel or tx channel - * based on the value of @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (stream) - return mcbsp->dma_rx_sync; - else - return mcbsp->dma_tx_sync; -} -EXPORT_SYMBOL(omap_mcbsp_dma_ch_params); - -/** - * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the address of mcbsp data transmit register or data receive register - * to be used by DMA for transferring/receiving data based on the value of - * @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - int data_reg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata->reg_size == 2) { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR1; - else - data_reg = OMAP_MCBSP_REG_DXR1; - } else { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR; - else - data_reg = OMAP_MCBSP_REG_DXR; - } - - return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; -} -EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); - -static void omap_st_on(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 1); - - /* Enable McBSP Sidetone */ - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN); - - /* Enable Sidetone from Sidetone Core */ - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN); -} - -static void omap_st_off(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); - - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 0); -} - -static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) -{ - u16 val, i; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - - if (val & ST_COEFFWREN) - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN); - - for (i = 0; i < 128; i++) - MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]); - - i = 0; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - while (!(val & ST_COEFFWRDONE) && (++i < 1000)) - val = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - if (i == 1000) - dev_err(mcbsp->dev, "McBSP FIR load error!\n"); -} - -static void omap_st_chgain(struct omap_mcbsp *mcbsp) -{ - u16 w; - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \ - ST_CH1GAIN(st_data->ch1gain)); -} - -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - st_data->ch0gain = chgain; - else if (channel == 1) - st_data->ch1gain = chgain; - else - ret = -EINVAL; - - if (st_data->enabled) - omap_st_chgain(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_set_chgain); - -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - *chgain = st_data->ch0gain; - else if (channel == 1) - *chgain = st_data->ch1gain; - else - ret = -EINVAL; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_get_chgain); - -static int omap_st_start(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->enabled && !st_data->running) { - omap_st_fir_write(mcbsp, st_data->taps); - omap_st_chgain(mcbsp); - - if (!mcbsp->free) { - omap_st_on(mcbsp); - st_data->running = 1; - } - } - - return 0; -} - -int omap_st_enable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - st_data->enabled = 1; - omap_st_start(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return 0; -} -EXPORT_SYMBOL(omap_st_enable); - -static int omap_st_stop(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->running) { - if (!mcbsp->free) { - omap_st_off(mcbsp); - st_data->running = 0; - } - } - - return 0; -} - -int omap_st_disable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - omap_st_stop(mcbsp); - st_data->enabled = 0; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_disable); - -int omap_st_is_enabled(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - - return st_data->enabled; -} -EXPORT_SYMBOL(omap_st_is_enabled); - -/* - * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH2 register. - */ -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_tx_thres) - MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); - -/* - * omap_mcbsp_set_rx_threshold configures the receive threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH1 register. - */ -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_rx_thres) - MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); - -/* - * omap_mcbsp_get_max_tx_thres just return the current configured - * maximum threshold for transmission - */ -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_tx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); - -/* - * omap_mcbsp_get_max_rx_thres just return the current configured - * maximum threshold for reception - */ -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_rx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); - -u16 omap_mcbsp_get_fifo_size(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->pdata->buffer_size; -} -EXPORT_SYMBOL(omap_mcbsp_get_fifo_size); - -/* - * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO - */ -u16 omap_mcbsp_get_tx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of free locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); - - /* Number of slots are different in McBSP ports */ - return mcbsp->pdata->buffer_size - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_tx_delay); - -/* - * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO - * to reach the threshold value (when the DMA will be triggered to read it) - */ -u16 omap_mcbsp_get_rx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat, threshold; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of used locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); - /* RX threshold */ - threshold = MCBSP_READ(mcbsp, THRSH1); - - /* Return the number of location till we reach the threshold limit */ - if (threshold <= buffstat) - return 0; - else - return threshold - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_rx_delay); - -/* - * omap_mcbsp_get_dma_op_mode just return the current configured - * operating mode for the mcbsp channel - */ -int omap_mcbsp_get_dma_op_mode(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - int dma_op_mode; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - dma_op_mode = mcbsp->dma_op_mode; - - return dma_op_mode; -} -EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); - -int omap_mcbsp_request(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - int err; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); - if (!reg_cache) { - return -ENOMEM; - } - - spin_lock(&mcbsp->lock); - if (!mcbsp->free) { - dev_err(mcbsp->dev, "McBSP%d is currently in use\n", - mcbsp->id); - err = -EBUSY; - goto err_kfree; - } - - mcbsp->free = false; - mcbsp->reg_cache = reg_cache; - spin_unlock(&mcbsp->lock); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) - mcbsp->pdata->ops->request(id); - - pm_runtime_get_sync(mcbsp->dev); - - /* Enable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - - /* - * Make sure that transmitter, receiver and sample-rate generator are - * not running before activating IRQs. - */ - MCBSP_WRITE(mcbsp, SPCR1, 0); - MCBSP_WRITE(mcbsp, SPCR2, 0); - - err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp->tx_irq, - mcbsp->id); - goto err_clk_disable; - } - - if (mcbsp->rx_irq) { - err = request_irq(mcbsp->rx_irq, - omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp->rx_irq, - mcbsp->id); - goto err_free_irq; - } - } - - return 0; -err_free_irq: - free_irq(mcbsp->tx_irq, (void *)mcbsp); -err_clk_disable: - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - spin_lock(&mcbsp->lock); - mcbsp->free = true; - mcbsp->reg_cache = NULL; -err_kfree: - spin_unlock(&mcbsp->lock); - kfree(reg_cache); - - return err; -} -EXPORT_SYMBOL(omap_mcbsp_request); - -void omap_mcbsp_free(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - if (mcbsp->rx_irq) - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - - reg_cache = mcbsp->reg_cache; - - spin_lock(&mcbsp->lock); - if (mcbsp->free) - dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id); - else - mcbsp->free = true; - mcbsp->reg_cache = NULL; - spin_unlock(&mcbsp->lock); - - if (reg_cache) - kfree(reg_cache); -} -EXPORT_SYMBOL(omap_mcbsp_free); - -/* - * Here we start the McBSP, by enabling transmitter, receiver or both. - * If no transmitter or receiver is active prior calling, then sample-rate - * generator and frame sync are started. - */ -void omap_mcbsp_start(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int enable_srg = 0; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->st_data) - omap_st_start(mcbsp); - - /* Only enable SRG, if McBSP is master */ - w = MCBSP_READ_CACHE(mcbsp, PCR0); - if (w & (FSXM | FSRM | CLKXM | CLKRM)) - enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (enable_srg) { - /* Start the sample generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); - } - - /* Enable transmitter and receiver */ - tx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | tx); - - rx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w | rx); - - /* - * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec - * REVISIT: 100us may give enough time for two CLKSRG, however - * due to some unknown PM related, clock gating etc. reason it - * is now at 500us. - */ - udelay(500); - - if (enable_srg) { - /* Start frame sync */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); - } - - if (mcbsp->pdata->has_ccr) { - /* Release the transmitter and receiver */ - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w &= ~(tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w &= ~(rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - - /* Dump McBSP Regs */ - omap_mcbsp_dump_reg(id); -} -EXPORT_SYMBOL(omap_mcbsp_start); - -void omap_mcbsp_stop(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int idle; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - - /* Reset transmitter */ - tx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w |= (tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); - - /* Reset receiver */ - rx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w |= (rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); - - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (idle) { - /* Reset the sample rate generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); - } - - if (mcbsp->st_data) - omap_st_stop(mcbsp); -} -EXPORT_SYMBOL(omap_mcbsp_stop); - -int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (!omap_mcbsp_check_valid_id(id)) { - pr_err("%s: Invalid id (%d)\n", __func__, id + 1); - return -EINVAL; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (fck_src_id == MCBSP_CLKS_PAD_SRC) - src = "clks_ext"; - else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) - src = "clks_fclk"; - else - return -EINVAL; - - if (mcbsp->pdata->set_clk_src) - return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src); - else - return -EINVAL; -} -EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); - -void omap2_mcbsp1_mux_clkr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == CLKR_SRC_CLKR) - src = "clkr"; - else if (mux == CLKR_SRC_CLKX) - src = "clkx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); - -void omap2_mcbsp1_mux_fsr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == FSR_SRC_FSR) - src = "fsr"; - else if (mux == FSR_SRC_FSX) - src = "fsx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); - -#define max_thres(m) (mcbsp->pdata->buffer_size) -#define valid_threshold(m, val) ((val) <= max_thres(m)) -#define THRESHOLD_PROP_BUILDER(prop) \ -static ssize_t prop##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%u\n", mcbsp->prop); \ -} \ - \ -static ssize_t prop##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - unsigned long val; \ - int status; \ - \ - status = strict_strtoul(buf, 0, &val); \ - if (status) \ - return status; \ - \ - if (!valid_threshold(mcbsp, val)) \ - return -EDOM; \ - \ - mcbsp->prop = val; \ - return size; \ -} \ - \ -static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); - -THRESHOLD_PROP_BUILDER(max_tx_thres); -THRESHOLD_PROP_BUILDER(max_rx_thres); - -static const char *dma_op_modes[] = { - "element", "threshold", "frame", -}; - -static ssize_t dma_op_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - int dma_op_mode, i = 0; - ssize_t len = 0; - const char * const *s; - - dma_op_mode = mcbsp->dma_op_mode; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { - if (dma_op_mode == i) - len += sprintf(buf + len, "[%s] ", *s); - else - len += sprintf(buf + len, "%s ", *s); - } - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t dma_op_mode_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - const char * const *s; - int i = 0; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) - if (sysfs_streq(buf, *s)) - break; - - if (i == ARRAY_SIZE(dma_op_modes)) - return -EINVAL; - - spin_lock_irq(&mcbsp->lock); - if (!mcbsp->free) { - size = -EBUSY; - goto unlock; - } - mcbsp->dma_op_mode = i; - -unlock: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); - -static const struct attribute *additional_attrs[] = { - &dev_attr_max_tx_thres.attr, - &dev_attr_max_rx_thres.attr, - &dev_attr_dma_op_mode.attr, - NULL, -}; - -static const struct attribute_group additional_attr_group = { - .attrs = (struct attribute **)additional_attrs, -}; - -static ssize_t st_taps_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - ssize_t status = 0; - int i; - - spin_lock_irq(&mcbsp->lock); - for (i = 0; i < st_data->nr_taps; i++) - status += sprintf(&buf[status], (i ? ", %d" : "%d"), - st_data->taps[i]); - if (i) - status += sprintf(&buf[status], "\n"); - spin_unlock_irq(&mcbsp->lock); - - return status; -} - -static ssize_t st_taps_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - int val, tmp, status, i = 0; - - spin_lock_irq(&mcbsp->lock); - memset(st_data->taps, 0, sizeof(st_data->taps)); - st_data->nr_taps = 0; - - do { - status = sscanf(buf, "%d%n", &val, &tmp); - if (status < 0 || status == 0) { - size = -EINVAL; - goto out; - } - if (val < -32768 || val > 32767) { - size = -EINVAL; - goto out; - } - st_data->taps[i++] = val; - buf += tmp; - if (*buf != ',') - break; - buf++; - } while (1); - - st_data->nr_taps = i; - -out: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); - -static const struct attribute *sidetone_attrs[] = { - &dev_attr_st_taps.attr, - NULL, -}; - -static const struct attribute_group sidetone_attr_group = { - .attrs = (struct attribute **)sidetone_attrs, -}; - -static int __devinit omap_st_add(struct omap_mcbsp *mcbsp, - struct resource *res) -{ - struct omap_mcbsp_st_data *st_data; - int err; - - st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL); - if (!st_data) { - err = -ENOMEM; - goto err1; - } - - st_data->io_base_st = ioremap(res->start, resource_size(res)); - if (!st_data->io_base_st) { - err = -ENOMEM; - goto err2; - } - - err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group); - if (err) - goto err3; - - mcbsp->st_data = st_data; - return 0; - -err3: - iounmap(st_data->io_base_st); -err2: - kfree(st_data); -err1: - return err; - -} - -static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); - iounmap(st_data->io_base_st); - kfree(st_data); -} - -/* - * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. - * 730 has only 2 McBSP, and both of them are MPU peripherals. - */ -static int __devinit omap_mcbsp_probe(struct platform_device *pdev) -{ - struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; - struct omap_mcbsp *mcbsp; - int id = pdev->id - 1; - struct resource *res; - int ret = 0; - - if (!pdata) { - dev_err(&pdev->dev, "McBSP device initialized without" - "platform data\n"); - ret = -EINVAL; - goto exit; - } - - dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - - if (id >= omap_mcbsp_count) { - dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); - ret = -EINVAL; - goto exit; - } - - mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); - if (!mcbsp) { - ret = -ENOMEM; - goto exit; - } - - spin_lock_init(&mcbsp->lock); - mcbsp->id = id + 1; - mcbsp->free = true; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); - if (!res) { - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory" - "resource\n", __func__, pdev->id); - ret = -ENOMEM; - goto exit; - } - } - mcbsp->phys_base = res->start; - mcbsp->reg_cache_size = resource_size(res); - mcbsp->io_base = ioremap(res->start, resource_size(res)); - if (!mcbsp->io_base) { - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); - if (!res) - mcbsp->phys_dma_base = mcbsp->phys_base; - else - mcbsp->phys_dma_base = res->start; - - mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); - mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); - - /* From OMAP4 there will be a single irq line */ - if (mcbsp->tx_irq == -ENXIO) - mcbsp->tx_irq = platform_get_irq(pdev, 0); - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_rx_sync = res->start; - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_tx_sync = res->start; - - mcbsp->fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR(mcbsp->fclk)) { - ret = PTR_ERR(mcbsp->fclk); - dev_err(&pdev->dev, "unable to get fck: %d\n", ret); - goto err_res; - } - - mcbsp->pdata = pdata; - mcbsp->dev = &pdev->dev; - mcbsp_ptr[id] = mcbsp; - platform_set_drvdata(pdev, mcbsp); - pm_runtime_enable(mcbsp->dev); - - mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; - if (mcbsp->pdata->buffer_size) { - /* - * Initially configure the maximum thresholds to a safe value. - * The McBSP FIFO usage with these values should not go under - * 16 locations. - * If the whole FIFO without safety buffer is used, than there - * is a possibility that the DMA will be not able to push the - * new data on time, causing channel shifts in runtime. - */ - mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; - mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; - - ret = sysfs_create_group(&mcbsp->dev->kobj, - &additional_attr_group); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create additional controls\n"); - goto err_thres; - } - } else { - mcbsp->max_tx_thres = -EINVAL; - mcbsp->max_rx_thres = -EINVAL; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); - if (res) { - ret = omap_st_add(mcbsp, res); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create sidetone controls\n"); - goto err_st; - } - } - - return 0; - -err_st: - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); -err_thres: - clk_put(mcbsp->fclk); -err_res: - iounmap(mcbsp->io_base); -err_ioremap: - kfree(mcbsp); -exit: - return ret; -} - -static int __devexit omap_mcbsp_remove(struct platform_device *pdev) -{ - struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - if (mcbsp) { - - if (mcbsp->pdata && mcbsp->pdata->ops && - mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(mcbsp->id); - - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); - - if (mcbsp->st_data) - omap_st_remove(mcbsp); - - clk_put(mcbsp->fclk); - - iounmap(mcbsp->io_base); - kfree(mcbsp); - } - - return 0; -} - -static struct platform_driver omap_mcbsp_driver = { - .probe = omap_mcbsp_probe, - .remove = __devexit_p(omap_mcbsp_remove), - .driver = { - .name = "omap-mcbsp", - }, -}; - -int __init omap_mcbsp_init(void) -{ - /* Register the McBSP driver */ - return platform_driver_register(&omap_mcbsp_driver); -} diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index e5a2fde29b1..089899a7db7 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low, /***************************************************************************** * EHCI ****************************************************************************/ -static struct orion_ehci_data orion_ehci_data = { - .phy_version = EHCI_PHY_NA, -}; - +static struct orion_ehci_data orion_ehci_data; static u64 ehci_dmamask = DMA_BIT_MASK(32); @@ -812,8 +809,10 @@ static struct platform_device orion_ehci = { }; void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq) + unsigned long irq, + enum orion_ehci_phy_ver phy_version) { + orion_ehci_data.phy_version = phy_version; fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, irq); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 0fe08d77e83..a7fa005a5a0 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low, unsigned long irq_1); void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq); + unsigned long irq, + enum orion_ehci_phy_ver phy_version); void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq); diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 91553432711..3b1e17bd3d1 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, gpio_mode |= GPIO_INPUT_OK; if (*mpp_list & MPP_OUTPUT_MASK) gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); } diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 9fe35348e03..2bab4c99a23 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void) struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; int channel; - for (channel = dma_channels - 1; channel >= 0; cp++, channel--) + for (channel = dma_channels - 1; channel >= 0; cp--, channel--) s3c2410_dma_resume_chan(cp); } diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 68296b1fe7e..699f9317129 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -52,7 +52,7 @@ static __init int pm_simtec_init(void) !machine_is_aml_m5900()) return 0; - printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n"); gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db2..d21d744e4d9 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); @@ -1407,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) #ifdef CONFIG_S3C_DEV_USB_HSOTG static struct resource s3c_usb_hsotg_resources[] = { - [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K), + [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K), [1] = DEFINE_RES_IRQ(IRQ_OTG), }; diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h index 8f39aa5b26e..9a78012d6f4 100644 --- a/arch/arm/plat-samsung/include/plat/regs-fb.h +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h @@ -91,6 +91,9 @@ #define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) #define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) #define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) +#define VIDCON1_VCLK_MASK (0x3 << 9) +#define VIDCON1_VCLK_HOLD (0x0 << 9) +#define VIDCON1_VCLK_RUN (0x1 << 9) #define VIDCON1_INV_VCLK (1 << 7) #define VIDCON1_INV_HSYNC (1 << 6) @@ -164,15 +167,17 @@ #define VIDTCON1_HSPW(_x) ((_x) << 0) #define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDTCON2_LINEVAL_MASK (0x7ff << 11) #define VIDTCON2_LINEVAL_SHIFT (11) #define VIDTCON2_LINEVAL_LIMIT (0x7ff) -#define VIDTCON2_LINEVAL(_x) ((_x) << 11) +#define VIDTCON2_LINEVAL(_x) (((_x) & 0x7ff) << 11) +#define VIDTCON2_HOZVAL_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDTCON2_HOZVAL_MASK (0x7ff << 0) #define VIDTCON2_HOZVAL_SHIFT (0) #define VIDTCON2_HOZVAL_LIMIT (0x7ff) -#define VIDTCON2_HOZVAL(_x) ((_x) << 0) +#define VIDTCON2_HOZVAL(_x) (((_x) & 0x7ff) << 0) /* WINCONx */ @@ -228,25 +233,29 @@ /* Local input channels (windows 0-2) */ #define SHADOWCON_CHx_LOCAL_ENABLE(_win) (1 << (5 + (_win))) +#define VIDOSDxA_TOPLEFT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) #define VIDOSDxA_TOPLEFT_X_SHIFT (11) #define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) -#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11) +#define VIDOSDxA_TOPLEFT_X(_x) (((_x) & 0x7ff) << 11) +#define VIDOSDxA_TOPLEFT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) #define VIDOSDxA_TOPLEFT_Y_SHIFT (0) #define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) -#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0) +#define VIDOSDxA_TOPLEFT_Y(_x) (((_x) & 0x7ff) << 0) +#define VIDOSDxB_BOTRIGHT_X_E(_x) ((((_x) & 0x800) >> 11) << 23) #define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) #define VIDOSDxB_BOTRIGHT_X_SHIFT (11) #define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) -#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11) +#define VIDOSDxB_BOTRIGHT_X(_x) (((_x) & 0x7ff) << 11) +#define VIDOSDxB_BOTRIGHT_Y_E(_x) ((((_x) & 0x800) >> 11) << 22) #define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) #define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) #define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) -#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0) +#define VIDOSDxB_BOTRIGHT_Y(_x) (((_x) & 0x7ff) << 0) /* For VIDOSD[1..4]C */ #define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) @@ -278,15 +287,17 @@ #define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) #define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) +#define VIDW_BUF_SIZE_OFFSET_E(_x) ((((_x) & 0x2000) >> 13) << 27) #define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) #define VIDW_BUF_SIZE_OFFSET_SHIFT (13) #define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) -#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13) +#define VIDW_BUF_SIZE_OFFSET(_x) (((_x) & 0x1fff) << 13) +#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x) ((((_x) & 0x2000) >> 13) << 26) #define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) #define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) #define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) -#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) (((_x) & 0x1fff) << 0) /* Interrupt controls and status */ @@ -384,3 +395,9 @@ #define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) #define WPALCON_W0PAL_16BPP_565 (0x6 << 0) +/* Blending equation control */ +#define BLENDCON (0x260) +#define BLENDCON_NEW_MASK (1 << 0) +#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0) +#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0) + diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h index 68b5394fc58..c16cc31ecbe 100644 --- a/arch/arm/plat-spear/include/plat/keyboard.h +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -15,7 +15,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/types.h> -#define DECLARE_KEYMAP(_name) \ +#define DECLARE_9x9_KEYMAP(_name) \ int _name[] = { \ KEY(0, 0, KEY_ESC), \ KEY(0, 1, KEY_1), \ @@ -62,24 +62,6 @@ int _name[] = { \ KEY(4, 6, KEY_Z), \ KEY(4, 7, KEY_X), \ KEY(4, 8, KEY_C), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ KEY(5, 0, KEY_V), \ KEY(5, 1, KEY_B), \ KEY(5, 2, KEY_N), \ @@ -118,10 +100,55 @@ int _name[] = { \ KEY(8, 8, KEY_KP0), \ } +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + /** * struct kbd_platform_data - spear keyboard platform data * keymap: pointer to keymap data (table and size) * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) * * This structure is supposed to be used by platform code to supply * keymaps to drivers that implement keyboards. @@ -129,6 +156,7 @@ int _name[] = { \ struct kbd_platform_data { const struct matrix_keymap_data *keymap; bool rep; + unsigned int mode; }; /* This function is used to set platform data field of pdev->dev */ diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 0c77e429867..abb5bdecd50 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long cycles, struct clock_event_device *clk_event_dev) { - u16 val; + u16 val = readw(gpt_base + CR(CLKEVT)); + + if (val & CTRL_ENABLE) + writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); writew(cycles, gpt_base + LOAD(CLKEVT)); - val = readw(gpt_base + CR(CLKEVT)); val |= CTRL_ENABLE | CTRL_INT_ENABLE; writew(val, gpt_base + CR(CLKEVT)); |