diff options
Diffstat (limited to 'arch/arm')
117 files changed, 787 insertions, 741 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7..1683bfb9166 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 5df26a9976a..fc871e719aa 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -59,9 +59,11 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif +targets += $(dtb-y) + # Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts - $(call cmd,dtc) +$(obj)/%.dtb: $(src)/dts/%.dts FORCE + $(call if_changed_dep,dtc) $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index d0d8dfece37..3a4fb2e5fc6 100644 --- a/arch/arm/configs/mx5_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set @@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y -CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y +CONFIG_MACH_VPR200=y +CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_MX53_EVK=y -CONFIG_MACH_MX53_SMD=y -CONFIG_MACH_MX53_LOCO=y -CONFIG_MACH_MX53_ARD=y +CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y -CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig deleted file mode 100644 index cb0717fbb03..00000000000 --- a/arch/arm/configs/mx3_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31ADS_WM1133_EV1=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_VFP=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_MTD_UBI=y -# CONFIG_BLK_DEV is not set -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_DNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_IMX2_WDT=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_WM8350=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M001=y -CONFIG_SOC_CAMERA_MT9M111=y -CONFIG_SOC_CAMERA_MT9T031=y -CONFIG_SOC_CAMERA_MT9V022=y -CONFIG_SOC_CAMERA_TW9910=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_MX3=y -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_MXC_SOC_WM1133_EV1=y -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_GADGET=m -CONFIG_USB_FSL_USB2=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI=y -CONFIG_MMC=y -CONFIG_MMC_MXC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_MXC=y -CONFIG_DMADEVICES=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 7151753b098..c402e9b31f4 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -2,7 +2,7 @@ #define _ARCH_ARM_GPIO_H #if CONFIG_ARCH_NR_GPIO > 0 -#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO +#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO #endif /* not all ARM platforms necessarily support this API ... */ diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index c93a22a8b92..917626128a1 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -25,7 +25,8 @@ #define HWCAP_IDIVT (1 << 18) #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +#if defined(__KERNEL__) +#if !defined(__ASSEMBLY__) /* * This yields a mask that user programs can use to figure out what * instruction set this cpu supports. @@ -33,5 +34,6 @@ #define ELF_HWCAP (elf_hwcap) extern unsigned int elf_hwcap; #endif +#endif #endif diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index feec86768f9..f82ec22eeb1 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -24,7 +24,6 @@ #define MAX_INSN_SIZE 2 #define MAX_STACK_SIZE 64 /* 32 would probably be OK */ -#define regs_return_value(regs) ((regs)->ARM_r0) #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h index b8da2e415e4..00ca5f92648 100644 --- a/arch/arm/include/asm/memblock.h +++ b/arch/arm/include/asm/memblock.h @@ -6,4 +6,6 @@ struct machine_desc; extern void arm_memblock_init(struct meminfo *, struct machine_desc *); +phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align); + #endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 96187ff58c2..451808ba121 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -189,6 +189,11 @@ static inline int valid_user_regs(struct pt_regs *regs) return 0; } +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->ARM_r0; +} + #define instruction_pointer(regs) (regs)->ARM_pc #ifdef CONFIG_SMP diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index 32ee164a2f6..b859d82e30c 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -22,7 +22,8 @@ # define __SWAB_64_THRU_32__ #endif -#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6 +#if defined(__KERNEL__) +#if __LINUX_ARM_ARCH__ >= 6 static inline __attribute_const__ __u32 __arch_swahb32(__u32 x) { @@ -39,8 +40,10 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) } #define __arch_swab32 __arch_swab32 -#else +#endif +#endif +#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6 static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __u32 t; diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 0f30c3a78fc..d4c24d412a8 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -129,6 +129,7 @@ extern void vfp_flush_hwstate(struct thread_info *); /* * thread information flags: * TIF_SYSCALL_TRACE - syscall trace active + * TIF_SYSCAL_AUDIT - syscall auditing active * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary * TIF_NOTIFY_RESUME - callback before returning to user @@ -139,6 +140,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_NEED_RESCHED 1 #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 +#define TIF_SYSCALL_AUDIT 9 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -149,11 +151,15 @@ extern void vfp_flush_hwstate(struct thread_info *); #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +/* Checks for any syscall work in entry-common.S */ +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) + /* * Change these and you break ASM code in entry-common.S */ diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index bc631161e9c..f5989f46b4d 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -37,8 +37,8 @@ #define THUMB(x...) x #ifdef __ASSEMBLY__ #define W(instr) instr.w -#endif #define BSYM(sym) sym + 1 +#endif #else /* !CONFIG_THUMB2_KERNEL */ @@ -49,8 +49,8 @@ #define THUMB(x...) #ifdef __ASSEMBLY__ #define W(instr) instr -#endif #define BSYM(sym) sym +#endif #endif /* CONFIG_THUMB2_KERNEL */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 4a112378380..512cd147345 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -427,7 +427,8 @@ /* * The following syscalls are obsolete and no longer available for EABI. */ -#if defined(__ARM_EABI__) && !defined(__KERNEL__) +#if !defined(__KERNEL__) +#if defined(__ARM_EABI__) #undef __NR_time #undef __NR_umount #undef __NR_stime @@ -441,6 +442,7 @@ #undef __NR_syscall #undef __NR_ipc #endif +#endif #ifdef __KERNEL__ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b2a27b6b004..520889cf1b5 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -87,7 +87,7 @@ ENTRY(ret_from_fork) get_thread_info tsk ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing mov why, #1 - tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls? beq ret_slow_syscall mov r1, sp mov r0, #1 @ trace exit [IP = 1] @@ -443,7 +443,7 @@ ENTRY(vector_swi) 1: #endif - tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 14e277d2ff9..6d579114406 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -99,6 +99,14 @@ ENTRY(stext) THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' +#ifdef CONFIG_ARM_LPAE + mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0 + and r3, r3, #0xf @ extract VMSA support + cmp r3, #5 @ long-descriptor translation table format? + THUMB( it lo ) @ force fixup-able long branch encoding + blo __error_p @ only classic page table format +#endif + #ifndef CONFIG_XIP_KERNEL adr r3, 2f ldmia r3, {r4, r8} diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 483727ad689..e1d5e1929fb 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -906,11 +906,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - if (!(current->ptrace & PT_PTRACED)) - return scno; - /* * Save IP. IP is used to denote syscall entry/exit: * IP = 0 -> entry, = 1 -> exit @@ -918,6 +913,17 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) ip = regs->ARM_ip; regs->ARM_ip = why; + if (!ip) + audit_syscall_exit(regs); + else + audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return scno; + if (!(current->ptrace & PT_PTRACED)) + return scno; + current_thread_info()->syscall = scno; /* the 0x80 provides a way for the tracing parent to distinguish diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 46d4d876e6f..e82c642fa53 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -37,7 +37,7 @@ */ struct ep93xx_dma_data { int port; - enum dma_data_direction direction; + enum dma_transfer_direction direction; const char *name; }; @@ -80,14 +80,14 @@ static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) * channel supports given DMA direction. Only M2P channels have such * limitation, for M2M channels the direction is configurable. */ -static inline enum dma_data_direction +static inline enum dma_transfer_direction ep93xx_dma_chan_direction(struct dma_chan *chan) { if (!ep93xx_dma_chan_is_m2p(chan)) return DMA_NONE; /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; } #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index 3cdeb364754..5364d4bfa8b 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -36,6 +36,8 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(exynos4_secondary_startup) + .align 2 1: .long . .long pen_release diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 2b11e046d39..0679b8ad2d1 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -597,7 +597,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = { static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .win[0] = &origen_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60bc45e3e70..683aec786b7 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -24,7 +24,6 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <asm/unified.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -137,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) while (time_before(jiffies, timeout)) { smp_rmb(); - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); gic_raise_softirq(cpumask_of(cpu), 1); @@ -192,6 +191,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); } diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 804c4a55f80..7afbe1e55be 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,7 +25,6 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <asm/unified.h> #include <asm/smp_scu.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -76,7 +75,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) #ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); #endif - writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); + writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), HB_JUMP_TABLE_PHYS(cpu) + 15); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de366c64..09f357bcecd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -22,6 +22,18 @@ config ARCH_MX25 config MACH_MX27 bool +config ARCH_MX5 + bool + +config ARCH_MX50 + bool + +config ARCH_MX51 + bool + +config ARCH_MX53 + bool + config SOC_IMX1 bool select ARCH_MX1 @@ -73,6 +85,32 @@ config SOC_IMX35 select MXC_AVIC select SMP_ON_UP if SMP +config SOC_IMX5 + select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX5 + bool + +config SOC_IMX50 + bool + select SOC_IMX5 + select ARCH_MX50 + +config SOC_IMX51 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX51 + +config SOC_IMX53 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 if ARCH_IMX_V4_V5 @@ -592,6 +630,207 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX5 platforms:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +comment "i.MX51 machines:" + +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MX51_EFIKA_COMMON + bool + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + +comment "i.MX53 machines:" + +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_SMD + bool "Support MX53 SMD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX53 SMD platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_LOCO + bool "Support MX53 LOCO platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER + help + Include support for MX53 LOCO platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + comment "i.MX6 family:" config SOC_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c24f7d..55db9c488f2 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o endif + +# i.MX5 based machines +obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o +obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o +obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o +obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o +obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o + +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o +obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 5f4d06af491..6dfdbcc83af 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 + +zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 + +zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 + zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c index 4cb27697719..08470504a08 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-imx/clock-mx51-mx53.c @@ -23,7 +23,7 @@ #include <mach/common.h> #include <mach/clock.h> -#include "crm_regs.h" +#include "crm-regs-imx5.h" /* External clock values passed-in by the board code */ static unsigned long external_high_reference, external_low_reference; diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a84386..5e2e7a84386 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-imx/cpu-imx5.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c02..9d34c3d4c02 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h index 97477fecb46..97477fecb46 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.h +++ b/arch/arm/mach-imx/cpu_op-mx51.h diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee..5e11ba7daee 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaaf..7216667eaaf 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e22..af488bc0e22 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3..6e1e5d1f8c3 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h index 014aa985faa..014aa985faa 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-imx/efika.h diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728..c17fa131728 100644 --- a/arch/arm/mach-mx5/ehci.c +++ b/arch/arm/mach-imx/ehci-imx5.c diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c index a6a3ab8f1b1..a6a3ab8f1b1 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b98..d817fc80b98 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908..e6bad17b908 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e6867..05ebb3e6867 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c index 944025da833..944025da833 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b0..9fbe923c8b0 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 89c33258639..4d1aab15440 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -36,6 +36,7 @@ #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/3ds_debugboard.h> @@ -754,10 +755,8 @@ static struct sys_timer mx31_3ds_timer = { static void __init mx31_3ds_reserve(void) { /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ - mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE, + mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE, MX31_3DS_CAMERA_BUF_SIZE); - memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE); - memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE); } MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index b95981dacb2..f225262b5c3 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -41,6 +41,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/board-mx31moboard.h> #include <mach/common.h> #include <mach/hardware.h> @@ -584,10 +585,8 @@ struct sys_timer mx31moboard_timer = { static void __init mx31moboard_reserve(void) { /* reserve 4 MiB for mx3-camera */ - mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE, + mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE, MX3_CAMERA_BUF_SIZE); - memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE); - memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE); } MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d961..42b66e8d961 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 83eab4176ca..83eab4176ca 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f71..e4b822e9f71 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885..3a5ed2dd885 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381..ea5f65b0381 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 5f224f1c3eb..08dfb7628d2 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index d6ce137896d..5a72188b9cd 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -37,7 +37,6 @@ #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) #define MX53EVK_LED IMX_GPIO_NR(7, 7) -#include "crm_regs.h" #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index fd8b524e1c5..37f67cac15a 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 22c53c9b18a..8e972c5c3e1 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index d7e151669ed..e48854b9d99 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -39,6 +39,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> @@ -680,10 +681,8 @@ struct sys_timer pcm037_timer = { static void __init pcm037_reserve(void) { /* reserve 4 MiB for mx3-camera */ - mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE, + mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE, MX3_CAMERA_BUF_SIZE); - memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE); - memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE); } MACHINE_START(PCM037, "Phytec Phycore pcm037") diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea381..bc17dfea381 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-imx/mm-imx5.c diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299..ec6ca91b299 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c index 5eebfaad122..6dc09344805 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,8 +1,6 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: @@ -10,14 +8,22 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> #include <mach/common.h> -#include "crm_regs.h" +#include <mach/hardware.h> +#include "crm-regs-imx5.h" + +static struct clk *gpc_dvfs_clk; -/* set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53.*/ +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53. + */ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; @@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); } } + +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + return 0; +} + +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, + .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, +}; + +static int __init mx5_pm_init(void) +{ + if (!cpu_is_mx51() && !cpu_is_mx53()) + return 0; + + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 4bde04f99e3..29bd1243781 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -15,7 +15,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> -#include <asm/unified.h> #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -43,7 +42,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { cpu = cpu_logical_map(cpu); - writel_relaxed(BSYM(virt_to_phys(jump_addr)), + writel_relaxed(virt_to_phys(jump_addr), src_base + SRC_GPR1 + cpu * 8); } diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S index 0c631a9f864..bcd5af223de 100644 --- a/arch/arm/mach-msm/headsmp.S +++ b/arch/arm/mach-msm/headsmp.S @@ -34,6 +34,7 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(msm_secondary_startup) .align 1: .long . diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c index a9103bc6615..bd66ed04d6d 100644 --- a/arch/arm/mach-msm/vreg.c +++ b/arch/arm/mach-msm/vreg.c @@ -19,6 +19,7 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/debugfs.h> +#include <linux/module.h> #include <linux/string.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig deleted file mode 100644 index af0c212e3c7..00000000000 --- a/arch/arm/mach-mx5/Kconfig +++ /dev/null @@ -1,244 +0,0 @@ -if ARCH_MX5 - -# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single -# image. So for most time, SOC_IMX50/51/53 should be used. - -config ARCH_MX51 - bool - -config ARCH_MX50 - bool - -config ARCH_MX53 - bool - -config SOC_IMX50 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX50 - -config SOC_IMX51 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX51 - -config SOC_IMX53 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MX53 - -#comment "i.MX50 machines:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - select USE_OF - select MACH_MX51_BABBAGE - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select USE_OF - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile deleted file mode 100644 index 0fc60807fa2..00000000000 --- a/arch/arm/mach-mx5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o - -obj-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o -obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o -obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o - -obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot deleted file mode 100644 index ca207ca305e..00000000000 --- a/arch/arm/mach-mx5/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 -params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 -initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c deleted file mode 100644 index 98052fc852c..00000000000 --- a/arch/arm/mach-mx5/pm-imx5.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include "crm_regs.h" - -static struct clk *gpc_dvfs_clk; - -static int mx5_suspend_prepare(void) -{ - return clk_enable(gpc_dvfs_clk); -} - -static int mx5_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - mx5_cpu_lp_set(STOP_POWER_OFF); - break; - case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - break; - default: - return -EINVAL; - } - - if (state == PM_SUSPEND_MEM) { - local_flush_tlb_all(); - flush_cache_all(); - - /*clear the EMPGC0/1 bits */ - __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); - } - cpu_do_idle(); - return 0; -} - -static void mx5_suspend_finish(void) -{ - clk_disable(gpc_dvfs_clk); -} - -static int mx5_pm_valid(suspend_state_t state) -{ - return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); -} - -static const struct platform_suspend_ops mx5_suspend_ops = { - .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, - .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, -}; - -static int __init mx5_pm_init(void) -{ - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; - - return 0; -} -device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 904bd1dfcd2..a8ba7b96dcd 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -366,8 +366,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 + bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" + depends on ARCH_OMAP4 && BROKEN select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 2ceb75d21eb..39fba9df17f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -602,20 +602,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static void sdp4430_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -833,9 +819,16 @@ static void omap_4430sdp_display_init(void) pr_err("%s: Could not get display_sel GPIO\n", __func__); sdp4430_lcd_init(); - sdp4430_hdmi_mux_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e96a2e7ad36..30ad40db2cf 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -412,21 +412,6 @@ int __init omap4_panda_dvi_init(void) return r; } - -static void omap4_panda_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -478,8 +463,16 @@ void omap4_panda_display_init(void) if (r) pr_err("error initializing panda DVI\n"); - omap4_panda_hdmi_mux_init(); omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } static void __init omap4_panda_init(void) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 46dfd1ae8f7..0b510ad01a0 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -28,7 +28,6 @@ #include <plat/board.h> #include <plat/mcbsp.h> #include <plat/mmc.h> -#include <plat/iommu.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -128,6 +127,10 @@ static struct platform_device omap2cam_device = { }; #endif +#if defined(CONFIG_IOMMU_API) + +#include <plat/iommu.h> + static struct resource omap3isp_resources[] = { { .start = OMAP3430_ISP_BASE, @@ -224,6 +227,15 @@ int omap3_init_camera(struct isp_platform_data *pdata) return platform_device_register(&omap3isp_device); } +#else /* !CONFIG_IOMMU_API */ + +int omap3_init_camera(struct isp_platform_data *pdata) +{ + return 0; +} + +#endif + static inline void omap_init_camera(void) { #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index bc6cf863a56..3c446d1a178 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,7 @@ #include <plat/omap-pm.h> #include "common.h" +#include "mux.h" #include "control.h" #include "display.h" @@ -97,6 +98,36 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; +static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) +{ + u32 reg; + u16 control_i2c_1; + + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); + + /* + * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and + * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable + * internal pull up resistor. + */ + if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { + control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; + reg = omap4_ctrl_pad_readl(control_i2c_1); + reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | + OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); + omap4_ctrl_pad_writel(reg, control_i2c_1); + } +} + static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; @@ -130,6 +161,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } +int omap_hdmi_init(enum omap_hdmi_flags flags) +{ + if (cpu_is_omap44xx()) + omap4_hdmi_mux_pads(flags); + + return 0; +} + static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index 69f3c72d959..d8f8ef40290 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -16,6 +16,7 @@ #include <linux/memblock.h> #include <asm/cacheflush.h> +#include <asm/memblock.h> #include <mach/omap-secure.h> @@ -57,20 +58,10 @@ u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, /* Allocate the memory to save secure ram */ int __init omap_secure_ram_reserve_memblock(void) { - phys_addr_t paddr; u32 size = OMAP_SECURE_RAM_STORAGE; size = ALIGN(size, SZ_1M); - paddr = memblock_alloc(size, SZ_1M); - if (!paddr) { - pr_err("%s: failed to reserve %x bytes\n", - __func__, size); - return -ENOMEM; - } - memblock_free(paddr, size); - memblock_remove(paddr, size); - - omap_secure_memblock_base = paddr; + omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M); return 0; } diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index bc16c818c6b..40a8fbc07e4 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -20,6 +20,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <plat/irqs.h> #include <plat/sram.h> @@ -61,13 +62,8 @@ static int __init omap_barriers_init(void) return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); - paddr = memblock_alloc(size, SZ_1M); - if (!paddr) { - pr_err("%s: failed to reserve 4 Kbytes\n", __func__); - return -ENOMEM; - } - memblock_free(paddr, size); - memblock_remove(paddr, size); + paddr = arm_memblock_steal(size, SZ_1M); + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c index 6c89cf8ab22..2ecba6743b8 100644 --- a/arch/arm/mach-picoxcell/time.c +++ b/arch/arm/mach-picoxcell/time.c @@ -67,7 +67,7 @@ static void picoxcell_add_clocksource(struct device_node *source_timer) static void __iomem *sched_io_base; -unsigned u32 notrace picoxcell_read_sched_clock(void) +static u32 picoxcell_read_sched_clock(void) { return __raw_readl(sched_io_base); } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index e83c654a58d..17c878ddbc7 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -17,7 +17,6 @@ #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/smp_scu.h> -#include <asm/unified.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> @@ -75,6 +74,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), + __raw_writel(virt_to_phys(versatile_secondary_startup), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 0069561464f..e6296211776 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -117,17 +117,14 @@ static void __init realview_eb_map_io(void) static struct pl061_platform_data gpio0_plat_data = { .gpio_base = 0, - .irq_base = -1, }; static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = -1, }; static struct pl061_platform_data gpio2_plat_data = { .gpio_base = 16, - .irq_base = -1, }; static struct pl022_ssp_controller ssp0_plat_data = { diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 8fe395568a4..e4abe94fb11 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -113,17 +113,14 @@ static void __init realview_pb1176_map_io(void) static struct pl061_platform_data gpio0_plat_data = { .gpio_base = 0, - .irq_base = -1, }; static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = -1, }; static struct pl061_platform_data gpio2_plat_data = { .gpio_base = 16, - .irq_base = -1, }; static struct pl022_ssp_controller ssp0_plat_data = { diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 34a26011bb8..127a3fd42ab 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -112,17 +112,14 @@ static void __init realview_pb11mp_map_io(void) static struct pl061_platform_data gpio0_plat_data = { .gpio_base = 0, - .irq_base = -1, }; static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = -1, }; static struct pl061_platform_data gpio2_plat_data = { .gpio_base = 16, - .irq_base = -1, }; static struct pl022_ssp_controller ssp0_plat_data = { diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index d26a6def1d6..25b2e59296f 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -102,17 +102,14 @@ static void __init realview_pba8_map_io(void) static struct pl061_platform_data gpio0_plat_data = { .gpio_base = 0, - .irq_base = -1, }; static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = -1, }; static struct pl061_platform_data gpio2_plat_data = { .gpio_base = 16, - .irq_base = -1, }; static struct pl022_ssp_controller ssp0_plat_data = { diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index a250fb4124b..ac715645b86 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -124,17 +124,14 @@ static void __init realview_pbx_map_io(void) static struct pl061_platform_data gpio0_plat_data = { .gpio_base = 0, - .irq_base = -1, }; static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = -1, }; static struct pl061_platform_data gpio2_plat_data = { .gpio_base = 16, - .irq_base = -1, }; static struct pl022_ssp_controller ssp0_plat_data = { diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 5d55ab018b6..4cb2f951f1e 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -21,5 +21,6 @@ #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) #define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) #define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) +#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96) #endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1cc91d794c9..8077f650eb0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -260,6 +260,7 @@ static struct platform_device crag6410_dm9k_device = { static struct resource crag6410_mmgpio_resource[] = { [0] = { + .name = "dat", .start = S3C64XX_PA_XM0CSN4 + 1, .end = S3C64XX_PA_XM0CSN4 + 1, .flags = IORESOURCE_MEM, @@ -272,7 +273,7 @@ static struct platform_device crag6410_mmgpio = { .resource = crag6410_mmgpio_resource, .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource), .dev.platform_data = &(struct bgpio_pdata) { - .base = -1, + .base = MMGPIO_GPIO_BASE, }, }; @@ -328,7 +329,6 @@ static struct platform_device wallvdd_device = { static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_hsmmc0, - &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_i2c0, &s3c_device_i2c1, @@ -355,7 +355,7 @@ static struct platform_device *crag6410_devices[] __initdata = { static struct pca953x_platform_data crag6410_pca_data = { .gpio_base = PCA935X_GPIO_BASE, - .irq_base = 0, + .irq_base = -1, }; /* VDDARM is controlled by DVS1 connected to GPK(0) */ @@ -683,12 +683,6 @@ static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .cd_type = S3C_SDHCI_CD_PERMANENT, }; -static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S3C64XX_GPF(11), -}; - static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) { /* Set all the necessary GPG pins to special-function 2 */ @@ -723,7 +717,6 @@ static void __init crag6410_machine_init(void) gpio_direction_output(S3C64XX_GPF(10), 1); s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata); s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 055dac90e0e..7d3e81b9dd0 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -346,23 +346,10 @@ int __init s3c64xx_pm_init(void) static __init int s3c64xx_pm_initcall(void) { - u32 val; - pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; - /* - * Unconditionally disable power domains that contain only - * blocks which have no mainline driver support. - */ - val = __raw_readl(S3C64XX_NORMAL_CFG); - val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | - S3C64XX_NORMALCFG_DOMAIN_V_ON | - S3C64XX_NORMALCFG_DOMAIN_I_ON | - S3C64XX_NORMALCFG_DOMAIN_P_ON); - __raw_writel(val, S3C64XX_NORMAL_CFG); - #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 6b93e200bca..ebafe8aa895 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -202,6 +202,7 @@ static struct irda_platform_data assabet_irda_data = { static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec = "ucb1x00", }; static void __init assabet_init(void) @@ -252,6 +253,17 @@ static void __init assabet_init(void) sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); sa11x0_register_mcp(&assabet_mcp_data); } @@ -268,7 +280,7 @@ static void __init map_sa1100_gpio_regs( void ) int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO); pmd_t *pmd; - pmd = pmd_offset(pgd_offset_k(virt), virt); + pmd = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); *pmd = __pmd(phys | prot); flush_pmd_entry(pmd); } diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 11bb6d0b9be..d12d0f48b1d 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -124,12 +124,23 @@ static void __init cerf_map_io(void) static struct mcp_plat_data cerf_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec = "ucb1x00", }; static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + sa11x0_register_mcp(&cerf_mcp_data); } diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index b9060e236de..c483912d08a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -27,6 +27,7 @@ #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> +#include <linux/mfd/ucb1x00.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -85,10 +86,15 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .gpio_base = COLLIE_TC35143_GPIO_BASE, + .codec = "ucb1x00", + .codec_pdata = &collie_ucb1x00_data, }; /* @@ -351,6 +357,16 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 480d2ea46b0..e3a28ca2a7b 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -217,10 +217,15 @@ static struct platform_device sa11x0uart3_device = { static struct resource sa11x0mcp_resources[] = { [0] = { .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0xffff, + .end = __PREG(Ser4MCCR0) + 0x1C - 1, .flags = IORESOURCE_MEM, }, [1] = { + .start = __PREG(Ser4MCCR1), + .end = __PREG(Ser4MCCR1) + 0x4 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { .start = IRQ_Ser4MCP, .end = IRQ_Ser4MCP, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h index 703631887c9..a38fc4f5424 100644 --- a/arch/arm/mach-sa1100/include/mach/gpio.h +++ b/arch/arm/mach-sa1100/include/mach/gpio.h @@ -51,7 +51,4 @@ static inline void gpio_set_value(unsigned gpio, int value) #define gpio_cansleep __gpio_cansleep -#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \ - (IRQ_GPIO11 - 11 + gpio)) - #endif diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index ed1a331508a..586cec898b3 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -17,6 +17,8 @@ struct mcp_plat_data { u32 mccr1; unsigned int sclk_rate; int gpio_base; + const char *codec; + void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index af4e2761f3d..d117ceab621 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,10 +24,20 @@ static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec = "ucb1x00", }; static void __init lart_init(void) { + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + sa11x0_register_mcp(&lart_mcp_data); } diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 318b2b766a0..748d34435b3 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -55,11 +55,22 @@ static struct resource shannon_flash_resource = { static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec = "ucb1x00", }; static void __init shannon_init(void) { sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + sa11x0_register_mcp(&shannon_mcp_data); } diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index e17c04d6e32..458ececefa5 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -14,6 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/mfd/ucb1x00.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -187,10 +188,15 @@ static struct resource simpad_flash_resources [] = { } }; +static struct ucb1x00_plat_data simpad_ucb1x00_data = { + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, +}; + static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, + .codec = "ucb1300", + .codec_pdata = &simpad_ucb1x00_data, }; @@ -378,6 +384,16 @@ static int __init simpad_init(void) sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + sa11x0_register_mcp(&simpad_mcp_data); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca04e31..eff8a96c75e 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -271,7 +271,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .flags = LCDC_FLAGS_DWPOL, .lcd_size_cfg.width = 44, .lcd_size_cfg.height = 79, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = lcdc0_modes, .num_cfg = ARRAY_SIZE(lcdc0_modes), .board_cfg = { @@ -321,12 +321,46 @@ static struct resource mipidsi0_resources[] = { }, }; +#define DSI0PHYCR 0xe615006c +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck; + int ret; + + pck = clk_get(&pdev->dev, "dsip_clk"); + if (IS_ERR(pck)) { + ret = PTR_ERR(pck); + goto sh_mipi_set_dot_clock_pck_err; + } + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + __raw_writel(0x2a809010, DSI0PHYCR); + clk_enable(pck); + } else { + clk_disable(pck); + } + + ret = 0; + + clk_put(pck); + +sh_mipi_set_dot_clock_pck_err: + return ret; +} + static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc0_info.ch[0], + .lane = 2, .vsynw_offset = 20, .clksrc = 1, - .flags = SH_MIPI_DSI_HSABM, + .flags = SH_MIPI_DSI_HSABM | + SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { @@ -472,8 +506,6 @@ static void __init ag5evm_map_io(void) shmobile_setup_console(); } -#define DSI0PHYCR 0xe615006c - static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -554,9 +586,6 @@ static void __init ag5evm_init(void) gpio_direction_output(GPIO_PORT235, 0); lcd_backlight_reset(); - /* MIPI-DSI clock setup */ - __raw_writel(0x2a809010, DSI0PHYCR); - /* enable SDHI0 on CN15 [SD I/F] */ gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d2e7b73aa9b..aab0a349f75 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -491,7 +491,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = ap4evb_lcdc_modes, .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), .meram_cfg = &lcd_meram_cfg, @@ -564,6 +564,30 @@ static struct platform_device keysc_device = { }; /* MIPI-DSI */ +#define PHYCTRL 0x0070 +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); + void __iomem *phy = base + PHYCTRL; + + if (IS_ERR(pck)) + return PTR_ERR(pck); + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + iowrite32(ioread32(phy) | (0xb << 8), phy); + clk_enable(pck); + } else { + clk_disable(pck); + } + + clk_put(pck); + + return 0; +} + static struct resource mipidsi0_resources[] = { [0] = { .start = 0xffc60000, @@ -580,7 +604,11 @@ static struct resource mipidsi0_resources[] = { static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc_info.ch[0], + .lane = 2, .vsynw_offset = 17, + .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { @@ -798,7 +826,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index cbc5934ae03..9b42fbd10f8 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -388,7 +388,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = mackerel_lcdc_modes, .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), .interface_type = RGB24, @@ -451,7 +451,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index e349c22a0d7..293456d8dcf 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -612,8 +612,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 34944d01bf1..afbead6a6e1 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -427,8 +427,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 77b8fc12fc2..fcf8b1761ae 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -276,7 +276,7 @@ static int sh7372_a3sp_suspend(void) * Serial consoles make use of SCIF hardware located in A3SP, * keep such power domain on if "no_console_suspend" is set. */ - return console_suspend_enabled ? -EBUSY : 0; + return console_suspend_enabled ? 0 : -EBUSY; } struct sh7372_pm_domain sh7372_a3sp = { diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 1ea89be63e2..6fcf304d3cd 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -445,31 +445,39 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; +#define SH7372_CHCLR 0x220 + static const struct sh_dmae_channel sh7372_dmae_channels[] = { { .offset = 0, .dmars = 0, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0, }, { .offset = 0x10, .dmars = 0, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x10, }, { .offset = 0x20, .dmars = 4, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0x20, }, { .offset = 0x30, .dmars = 4, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x30, }, { .offset = 0x50, .dmars = 8, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0x50, }, { .offset = 0x60, .dmars = 8, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x60, } }; @@ -487,6 +495,7 @@ static struct sh_dmae_pdata dma_platform_data = { .ts_shift = ts_shift, .ts_shift_num = ARRAY_SIZE(ts_shift), .dmaor_init = DMAOR_DME, + .chclr_present = 1, }; /* Resource order important! */ @@ -494,7 +503,7 @@ static struct resource sh7372_dmae0_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe008020, - .end = 0xfe00808f, + .end = 0xfe00828f, .flags = IORESOURCE_MEM, }, { @@ -522,7 +531,7 @@ static struct resource sh7372_dmae1_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe018020, - .end = 0xfe01808f, + .end = 0xfe01828f, .flags = IORESOURCE_MEM, }, { @@ -550,7 +559,7 @@ static struct resource sh7372_dmae2_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe028020, - .end = 0xfe02808f, + .end = 0xfe02828f, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9361a529017..5c00712907d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -19,11 +19,11 @@ #include <linux/amba/pl022.h> #include <linux/amba/serial.h> #include <linux/spi/spi.h> -#include <linux/mfd/ab8500.h> +#include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> -#include <linux/mfd/ab8500/gpio.h> +#include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/smsc911x.h> diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index fe1569b67c9..9de9e9c4dbb 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -10,7 +10,7 @@ #include <linux/amba/bus.h> #include <linux/irq.h> #include <linux/i2c.h> -#include <linux/mfd/ab5500/ab5500.h> +#include <linux/mfd/abx500/ab5500.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S index 64fa451edcf..08da5589bcd 100644 --- a/arch/arm/mach-ux500/headsmp.S +++ b/arch/arm/mach-ux500/headsmp.S @@ -32,6 +32,8 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(u8500_secondary_startup) + .align 2 1: .long . .long pen_release diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 47969909836..d2d4131435a 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -9,7 +9,7 @@ #define __MACH_IRQS_BOARD_MOP500_H /* Number of AB8500 irqs is taken from header file */ -#include <linux/mfd/ab8500.h> +#include <linux/mfd/abx500/ab8500.h> #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 2b5f7ac001a..124ffb16909 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,8 +13,6 @@ #include <linux/smp.h> #include <linux/io.h> -#include <asm/unified.h> - #include <mach/motherboard.h> #define V2M_PA_CS7 0x10000000 @@ -46,6 +44,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(versatile_secondary_startup)), + writel(virt_to_phys(versatile_secondary_startup), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c index 3de4a5211c3..06d867dce55 100644 --- a/arch/arm/mach-w90x900/clksel.c +++ b/arch/arm/mach-w90x900/clksel.c @@ -48,7 +48,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval) offset = ATAOFFSET; else if (strcmp(dev_id, "nuc900-lcd") == 0) offset = LCDOFFSET; - else if (strcmp(dev_id, "nuc900-audio") == 0) + else if (strcmp(dev_id, "nuc900-ac97") == 0) offset = AUDOFFSET; else offset = CPUOFFSET; diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 604e1db266e..9a066199290 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -79,7 +79,7 @@ static DEFINE_CLK(timer4, 23); static struct clk_lookup nuc900_clkregs[] = { DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL), - DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL), + DEF_CLKLOOK(&clk_audio, "nuc900-ac97", NULL), DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL), DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"), DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"), diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 5b0c38abacc..78110befb7a 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -501,8 +501,8 @@ static struct resource nuc900_ac97_resource[] = { }; -struct platform_device nuc900_device_audio = { - .name = "nuc900-audio", +struct platform_device nuc900_device_ac97 = { + .name = "nuc900-ac97", .id = -1, .num_resources = ARRAY_SIZE(nuc900_ac97_resource), .resource = nuc900_ac97_resource, @@ -523,7 +523,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { &nuc900_device_emc, &nuc900_device_spi, &nuc900_device_wdt, - &nuc900_device_audio, + &nuc900_device_ac97, }; /* Provide adding specific CPU platform devices API */ diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c index 9dd74612bb8..c58d142b8a4 100644 --- a/arch/arm/mach-w90x900/mfp.c +++ b/arch/arm/mach-w90x900/mfp.c @@ -155,7 +155,7 @@ void mfp_set_groupg(struct device *dev, const char *subname) } else if (strcmp(dev_id, "nuc900-i2c1") == 0) { mfpen &= ~(GPIOG2TO3); mfpen |= ENI2C1;/*enable i2c1*/ - } else if (strcmp(dev_id, "nuc900-audio") == 0) { + } else if (strcmp(dev_id, "nuc900-ac97") == 0) { mfpen &= ~(GPIOG22TO23); mfpen |= ENAC97;/*enable AC97*/ } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e34ea8adc1f..6ec1226fc62 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -22,6 +22,7 @@ #include <linux/memblock.h> #include <asm/mach-types.h> +#include <asm/memblock.h> #include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> @@ -307,6 +308,21 @@ static void arm_memory_present(void) } #endif +static bool arm_memblock_steal_permitted = true; + +phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align) +{ + phys_addr_t phys; + + BUG_ON(!arm_memblock_steal_permitted); + + phys = memblock_alloc(size, align); + memblock_free(phys, size); + memblock_remove(phys, size); + + return phys; +} + void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) { int i; @@ -349,6 +365,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) if (mdesc->reserve) mdesc->reserve(); + arm_memblock_steal_permitted = false; memblock_allow_resize(); memblock_dump_all(); } diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b30708e28c1..dcebb1230f7 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5 and ARMv5 SoCs config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX6" + bool "i.MX3, i.MX5, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT select MIGHT_HAVE_CACHE_L2X0 help - This enables support for systems based on the Freescale i.MX3 and i.MX6 - family. - -config ARCH_MX5 - bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR if !ZBOOT_ROM - select ARM_PATCH_PHYS_VIRT - help - This enables support for machines using Freescale's i.MX50 and i.MX53 - processors. + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h index ac24c5c4bc8..fdbe6000154 100644 --- a/arch/arm/plat-mxc/include/mach/mx3fb.h +++ b/arch/arm/plat-mxc/include/mach/mx3fb.h @@ -22,6 +22,20 @@ #define FB_SYNC_SWAP_RGB 0x04000000 #define FB_SYNC_CLK_SEL_EN 0x02000000 +/* + * Specify the way your display is connected. The IPU can arbitrarily + * map the internal colors to the external data lines. We only support + * the following mappings at the moment. + */ +enum disp_data_mapping { + /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ + IPU_DISP_DATA_MAPPING_RGB666, + /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ + IPU_DISP_DATA_MAPPING_RGB565, + /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ + IPU_DISP_DATA_MAPPING_RGB888, +}; + /** * struct mx3fb_platform_data - mx3fb platform data * @@ -33,6 +47,7 @@ struct mx3fb_platform_data { const char *name; const struct fb_videomode *mode; int num_modes; + enum disp_data_mapping disp_data_fmt; }; #endif diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 685c78716d9..fd0ee84c45d 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -113,7 +113,8 @@ struct stedma40_half_channel_info { * @dst_dev_type: Dst device type * @src_info: Parameters for dst half channel * @dst_info: Parameters for dst half channel - * + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true * * This structure has to be filled by the client drivers. * It is recommended to do all dma configurations for clients in the machine. @@ -129,6 +130,9 @@ struct stedma40_chan_cfg { int dst_dev_type; struct stedma40_half_channel_info src_info; struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; }; /** @@ -153,6 +157,7 @@ struct stedma40_platform_data { struct stedma40_chan_cfg *memcpy_conf_phy; struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; + bool use_esram_lcla; }; #ifdef CONFIG_STE_DMA40 @@ -187,7 +192,7 @@ static inline struct dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, dma_addr_t addr, unsigned int size, - enum dma_data_direction direction, + enum dma_transfer_direction direction, unsigned long flags) { struct scatterlist sg; @@ -209,7 +214,7 @@ static inline struct dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, dma_addr_t addr, unsigned int size, - enum dma_data_direction direction, + enum dma_transfer_direction direction, unsigned long flags) { return NULL; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 19719329a47..60278f47c0b 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -20,6 +20,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <plat/tc.h> #include <plat/board.h> @@ -164,14 +165,12 @@ void __init omap_dsp_reserve_sdram_memblock(void) if (!size) return; - paddr = memblock_alloc(size, SZ_1M); + paddr = arm_memblock_steal(size, SZ_1M); if (!paddr) { pr_err("%s: failed to reserve %x bytes\n", __func__, size); return; } - memblock_free(paddr, size); - memblock_remove(paddr, size); omap_dsp_phys_mempool_base = paddr; } diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 1121df13e15..21f1fda8b66 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -38,8 +38,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/system-reset.h> - #include <mach/regs-gpio.h> #include <plat/regs-serial.h> diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 2cded872f22..0747c77a2fd 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -37,14 +37,14 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, (void *)dma_ch; chan = dma_request_channel(mask, pl330_filter, filter_param); - if (info->direction == DMA_FROM_DEVICE) { + if (info->direction == DMA_DEV_TO_MEM) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); slave_config.direction = info->direction; slave_config.src_addr = info->fifo; slave_config.src_addr_width = info->width; slave_config.src_maxburst = 1; dmaengine_slave_config(chan, &slave_config); - } else if (info->direction == DMA_TO_DEVICE) { + } else if (info->direction == DMA_MEM_TO_DEV) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); slave_config.direction = info->direction; slave_config.dst_addr = info->fifo; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 22eafc310bd..71a6827c770 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -14,10 +14,11 @@ #define __SAMSUNG_DMA_OPS_H_ __FILE__ #include <linux/dmaengine.h> +#include <mach/dma.h> struct samsung_dma_prep_info { enum dma_transaction_type cap; - enum dma_data_direction direction; + enum dma_transfer_direction direction; dma_addr_t buf; unsigned long period; unsigned long len; @@ -27,7 +28,7 @@ struct samsung_dma_prep_info { struct samsung_dma_info { enum dma_transaction_type cap; - enum dma_data_direction direction; + enum dma_transfer_direction direction; enum dma_slave_buswidth width; dma_addr_t fifo; struct s3c2410_dma_client *client; diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index b9061128abd..7b02143ccd9 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -10,6 +10,9 @@ * published by the Free Software Foundation. */ +#ifndef __PLAT_DMA_H +#define __PLAT_DMA_H + #include <linux/dma-mapping.h> enum s3c2410_dma_buffresult { @@ -122,5 +125,6 @@ extern int s3c2410_dma_getposition(enum dma_ch channel, extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); - #include <plat/dma-ops.h> + +#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index aea68b60ef9..fa95e9a0097 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -11,6 +11,8 @@ #ifndef __S3C64XX_PLAT_SPI_H #define __S3C64XX_PLAT_SPI_H +struct platform_device; + /** * struct s3c64xx_spi_csinfo - ChipSelect description * @fb_delay: Slave specific feedback delay. diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 656dc00d30e..f82f888b91a 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -63,6 +63,7 @@ enum clk_types { struct s3c_sdhci_platdata { unsigned int max_width; unsigned int host_caps; + unsigned int pm_caps; enum cd_types cd_type; enum clk_types clk_type; diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index ceb9fa3a80c..0f707184eae 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -53,6 +53,8 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, set->cfg_gpio = pd->cfg_gpio; if (pd->host_caps) set->host_caps |= pd->host_caps; + if (pd->pm_caps) + set->pm_caps |= pd->pm_caps; if (pd->clk_type) set->clk_type = pd->clk_type; } diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index d397a1fb2f5..dd703ef09b8 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -38,3 +38,4 @@ pen: ldr r7, [r6] .align 1: .long . .long pen_release +ENDPROC(versatile_secondary_startup) |