diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/am335x-evm.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/am335x-evmsk.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/am335x-igep0033.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9x5.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7-evm.dts | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/exynos4.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/mach-exynos/exynos.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-exynos/firmware.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-gate2.c | 31 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clkt_dpll.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/cm-regbits-34xx.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap2/common.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 28 | ||||
-rw-r--r-- | arch/arm/mach-omap2/dsp.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap2/prm-regbits-34xx.h | 6 |
18 files changed, 87 insertions, 56 deletions
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf..e2156a583de 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524..80a3b215e7d 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd..a1a0cc5eb35 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f49720..2ebc42140ea 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c3..83089540e32 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index c90c76de84d..dc7a292fe93 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426d2da..17b22e9cc2a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 176bbf574d4..46d893fcbe8 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -295,7 +295,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8..e8797bb7887 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d..84acdfd1d71 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d..67fd26a1844 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf86..ee6c784cd6b 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b2d252bf4a5..dc571f1d3b8 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf..b6f8f348296 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <linux/platform_data/spi-omap2-mcspi.h> @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd..f7492df1cbb 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include <linux/platform_data/dsp-omap.h> @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900..8bc13380f0a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec0..284324f2b98 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* @@ -1731,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532..cbefbd7cfdb 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) |