summaryrefslogtreecommitdiffstats
path: root/arch/avr32/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r--arch/avr32/boards/atngw100/setup.c19
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c25
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c15
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c18
4 files changed, 59 insertions, 18 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index b8286f1ce85..6c54580a66d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,7 @@
*/
#include <linux/clk.h>
#include <linux/etherdevice.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -53,8 +54,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
};
static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(25),
- .wp_pin = GPIO_PIN_PE(0),
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = GPIO_PIN_PC(25),
+ .wp_pin = GPIO_PIN_PE(0),
+ },
};
/*
@@ -190,7 +194,7 @@ static int __init atngw100_init(void)
* PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
* but it's not available off-board.
*/
- at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
at32_select_gpio(i2c_gpio_data.sda_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
at32_select_gpio(i2c_gpio_data.scl_pin,
@@ -204,6 +208,15 @@ postcore_initcall(atngw100_init);
static int __init atngw100_arch_init(void)
{
+ /* PB30 is the otherwise unused jumper on the mainboard, with an
+ * external pullup; the jumper grounds it. Use it however you
+ * like, including letting U-Boot or Linux tweak boot sequences.
+ */
+ at32_select_gpio(GPIO_PIN_PB(30), 0);
+ gpio_request(GPIO_PIN_PB(30), "j15");
+ gpio_direction_input(GPIO_PIN_PB(30));
+ gpio_export(GPIO_PIN_PB(30), false);
+
/* set_irq_type() after the arch_initcall for EIC has run, and
* before the I2C subsystem could try using this IRQ.
*/
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index ee4c292683e..29e5b51a7fd 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -264,16 +264,20 @@ void __init setup_board(void)
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+
/* MMC card detect requires MACB0 *NOT* be used */
#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
-};
-#define MCI_PDATA &mci0_data
+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
#else
-#define MCI_PDATA NULL
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
#endif /* SW6 for sd{cd,wp} routing */
+ },
+};
#endif /* SW2 for MMC signal routing */
@@ -325,14 +329,15 @@ static int __init atstk1002_init(void)
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- at32_add_device_mci(0, MCI_PDATA);
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_add_device_mci(0, &mci0_data);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
#else
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 0cf664174c1..be089d7f37e 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -19,6 +19,7 @@
#include <linux/spi/spi.h>
#include <asm/setup.h>
+#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1003_setup_extdac(void)
{
@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -154,7 +165,7 @@ static int __init atstk1003_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 50a5273e591..248ef237c16 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -21,6 +21,7 @@
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
+#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1004_setup_extdac(void)
{
@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -137,10 +148,11 @@ static int __init atstk1004_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 13:42:50 +0000