diff options
Diffstat (limited to 'arch/blackfin/include/asm/bfin6xx_spi.h')
| -rw-r--r-- | arch/blackfin/include/asm/bfin6xx_spi.h | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin6xx_spi.h new file mode 100644 index 00000000000..89370b653dc --- /dev/null +++ b/arch/blackfin/include/asm/bfin6xx_spi.h @@ -0,0 +1,258 @@ +/* + * Analog Devices SPI3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#include <linux/types.h> + +/* SPI_CONTROL */ +#define SPI_CTL_EN 0x00000001 /* Enable */ +#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ +#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ +#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ +#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ +#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ +#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ +#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ +#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ +#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ +#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ +#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ +#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ +#define SPI_CTL_LSBF 0x00001000 /* LSB First */ +#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ +#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ +#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ +#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ +#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ +#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ +#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ +#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ +#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ +#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ +#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ +#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ +#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ +/* SPI_RX_CONTROL */ +#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ +#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ +#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ +#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ +#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ +#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ +#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ +#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ +#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ +#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ +#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ +#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ +#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ +#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ +#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ +#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ +#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ +#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ +#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ +#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ +/* SPI_TX_CONTROL */ +#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ +#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ +#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ +#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ +#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ +#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ +#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ +#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ +#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ +#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ +#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ +#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ +#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ +#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ +#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ +#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ +#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ +#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ +#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ +#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ +/* SPI_CLOCK */ +#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ +/* SPI_DELAY */ +#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ +#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ +#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ +/* SPI_SSEL */ +#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ +#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ +#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ +#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ +#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ +#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ +#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ +#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ +#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ +#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ +#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ +#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ +#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ +#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ +/* SPI_RWC */ +#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ +/* SPI_RWCR */ +#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ +/* SPI_TWC */ +#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ +/* SPI_TWCR */ +#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ +/* SPI_IMASK */ +#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKCL */ +#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKST */ +#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_STATUS */ +#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ +#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ +#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ +#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ +#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ +#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ +#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ +#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ +#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ +#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ +#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ +#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ +#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ +#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ +#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ +#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ +#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ +#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ +#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ +#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ +#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ +#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ +#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ +/* SPI_ILAT */ +#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ +/* SPI_ILATCL */ +#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ + +/* + * bfin spi3 registers layout + */ +struct bfin_spi_regs { + u32 revid; + u32 control; + u32 rx_control; + u32 tx_control; + u32 clock; + u32 delay; + u32 ssel; + u32 rwc; + u32 rwcr; + u32 twc; + u32 twcr; + u32 reserved0; + u32 emask; + u32 emaskcl; + u32 emaskst; + u32 reserved1; + u32 status; + u32 elat; + u32 elatcl; + u32 reserved2; + u32 rfifo; + u32 reserved3; + u32 tfifo; +}; + +#define MAX_CTRL_CS 8 /* cs in spi controller */ + +/* device.platform_data for SSP controller devices */ +struct bfin6xx_spi_master { + u16 num_chipselect; + u16 pin_req[7]; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct bfin6xx_spi_chip { + u32 control; + u16 cs_chg_udelay; /* Some devices require 16-bit delays */ + u32 tx_dummy_val; /* tx value for rx only transfer */ + bool enable_dma; +}; + +#endif /* _SPI_CHANNEL_H_ */ |