diff options
Diffstat (limited to 'arch/blackfin/include/asm')
-rw-r--r-- | arch/blackfin/include/asm/.gitignore | 1 | ||||
-rw-r--r-- | arch/blackfin/include/asm/atomic.h | 2 | ||||
-rw-r--r-- | arch/blackfin/include/asm/bitsperlong.h | 1 | ||||
-rw-r--r-- | arch/blackfin/include/asm/cacheflush.h | 40 | ||||
-rw-r--r-- | arch/blackfin/include/asm/cplb.h | 35 | ||||
-rw-r--r-- | arch/blackfin/include/asm/dma.h | 10 | ||||
-rw-r--r-- | arch/blackfin/include/asm/elf.h | 84 | ||||
-rw-r--r-- | arch/blackfin/include/asm/entry.h | 92 | ||||
-rw-r--r-- | arch/blackfin/include/asm/flat.h | 1 | ||||
-rw-r--r-- | arch/blackfin/include/asm/gptimers.h | 43 | ||||
-rw-r--r-- | arch/blackfin/include/asm/io.h | 29 | ||||
-rw-r--r-- | arch/blackfin/include/asm/ipipe.h | 4 | ||||
-rw-r--r-- | arch/blackfin/include/asm/page.h | 2 | ||||
-rw-r--r-- | arch/blackfin/include/asm/pda.h | 2 | ||||
-rw-r--r-- | arch/blackfin/include/asm/processor.h | 4 | ||||
-rw-r--r-- | arch/blackfin/include/asm/signal.h | 2 | ||||
-rw-r--r-- | arch/blackfin/include/asm/time.h | 1 | ||||
-rw-r--r-- | arch/blackfin/include/asm/uaccess.h | 32 | ||||
-rw-r--r-- | arch/blackfin/include/asm/unistd.h | 4 |
19 files changed, 252 insertions, 137 deletions
diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore deleted file mode 100644 index 7858564a446..00000000000 --- a/arch/blackfin/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -+mach diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 94b2a9b1945..7bbf44e4ddf 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -208,6 +208,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) #define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#include <asm-generic/atomic.h> +#include <asm-generic/atomic-long.h> #endif /* __ARCH_BLACKFIN_ATOMIC __ */ diff --git a/arch/blackfin/include/asm/bitsperlong.h b/arch/blackfin/include/asm/bitsperlong.h new file mode 100644 index 00000000000..6dc0bb0c13b --- /dev/null +++ b/arch/blackfin/include/asm/bitsperlong.h @@ -0,0 +1 @@ +#include <asm-generic/bitsperlong.h> diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 1b040f5b4fe..94697f0f6f4 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -30,7 +30,8 @@ #ifndef _BLACKFIN_CACHEFLUSH_H #define _BLACKFIN_CACHEFLUSH_H -extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address); +#include <asm/blackfin.h> /* for SSYNC() */ + extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address); @@ -54,32 +55,28 @@ extern void blackfin_invalidate_entire_dcache(void); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) - -# if defined(CONFIG_BFIN_WT) - blackfin_icache_flush_range((start), (end)); - flush_icache_range_others(start, end); -# else - blackfin_icache_dcache_flush_range((start), (end)); -# endif - -#else +#if defined(CONFIG_BFIN_WB) + blackfin_dcache_flush_range(start, end); +#endif -# if defined(CONFIG_BFIN_ICACHE) - blackfin_icache_flush_range((start), (end)); + /* Make sure all write buffers in the data side of the core + * are flushed before trying to invalidate the icache. This + * needs to be after the data flush and before the icache + * flush so that the SSYNC does the right thing in preventing + * the instruction prefetcher from hitting things in cached + * memory at the wrong time -- it runs much further ahead than + * the pipeline. + */ + SSYNC(); +#if defined(CONFIG_BFIN_ICACHE) + blackfin_icache_flush_range(start, end); flush_icache_range_others(start, end); -# endif -# if defined(CONFIG_BFIN_DCACHE) - blackfin_dcache_flush_range((start), (end)); -# endif - #endif } #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { memcpy(dst, src, len); \ flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ - flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) @@ -111,6 +108,11 @@ static inline int bfin_addr_dcachable(unsigned long addr) addr >= _ramend && addr < physical_mem_end) return 1; +#ifndef CONFIG_BFIN_L2_NOT_CACHED + if (addr >= L2_START && addr < L2_START + L2_LENGTH) + return 1; +#endif + return 0; } diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index ad566ff9ad1..a75a6a9f094 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -53,29 +53,32 @@ #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) #endif +#define SDRAM_DNON_CHBL (CPLB_COMMON) +#define SDRAM_EBIU (CPLB_COMMON) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + #define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) #ifdef CONFIG_SMP -#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (CPLB_COMMON | CPLB_LOCK) -#define L2_DMEMORY (CPLB_COMMON | CPLB_LOCK) +#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) +#define L2_IMEMORY (CPLB_COMMON) +#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON) #else -#ifdef CONFIG_BFIN_L2_CACHEABLE -#define L2_IMEMORY (SDRAM_IGENERIC) -#define L2_DMEMORY (SDRAM_DGENERIC) -#else -#define L2_IMEMORY (CPLB_COMMON) -#define L2_DMEMORY (CPLB_COMMON) -#endif /* CONFIG_BFIN_L2_CACHEABLE */ - -#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) +#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) +#define L2_IMEMORY (SDRAM_IGENERIC) + +# if defined(CONFIG_BFIN_L2_WB) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON) +# elif defined(CONFIG_BFIN_L2_WT) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +# elif defined(CONFIG_BFIN_L2_NOT_CACHED) +# define L2_DMEMORY (CPLB_COMMON) +# else +# define L2_DMEMORY (0) +# endif #endif /* CONFIG_SMP */ -#define SDRAM_DNON_CHBL (CPLB_COMMON) -#define SDRAM_EBIU (CPLB_COMMON) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) - #define SIZE_1K 0x00000400 /* 1K */ #define SIZE_4K 0x00001000 /* 4K */ #define SIZE_1M 0x00100000 /* 1M */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index e4f7b8043f0..c9a59622e23 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -206,10 +206,16 @@ static inline unsigned long get_dma_curr_addr(unsigned int channel) static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize) { + /* Make sure the internal data buffers in the core are drained + * so that the DMA descriptors are completely written when the + * DMA engine goes to fetch them below. + */ + SSYNC(); + + dma_ch[channel].regs->next_desc_ptr = sg; dma_ch[channel].regs->cfg = (dma_ch[channel].regs->cfg & ~(0xf << 8)) | ((ndsize & 0xf) << 8); - dma_ch[channel].regs->next_desc_ptr = sg; } static inline int dma_channel_active(unsigned int channel) @@ -253,5 +259,7 @@ static inline void clear_dma_irqstat(unsigned int channel) void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); void blackfin_dma_early_init(void); +void early_dma_memcpy(void *dest, const void *src, size_t count); +void early_dma_memcpy_done(void); #endif diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index cdbfcfc30f6..230e1605d3f 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -55,50 +55,50 @@ do { \ #define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC #define ELF_EXEC_PAGESIZE 4096 -#define R_unused0 0 /* relocation type 0 is not defined */ -#define R_pcrel5m2 1 /*LSETUP part a */ -#define R_unused1 2 /* relocation type 2 is not defined */ -#define R_pcrel10 3 /* type 3, if cc jump <target> */ -#define R_pcrel12_jump 4 /* type 4, jump <target> */ -#define R_rimm16 5 /* type 0x5, rN = <target> */ -#define R_luimm16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */ -#define R_huimm16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */ -#define R_pcrel12_jump_s 8 /* # 0x8 jump.s <target> */ -#define R_pcrel24_jump_x 9 /* # 0x9 jump.x <target> */ -#define R_pcrel24 10 /* # 0xa call <target> , not expandable */ -#define R_unusedb 11 /* # 0xb not generated */ -#define R_unusedc 12 /* # 0xc not used */ -#define R_pcrel24_jump_l 13 /*0xd jump.l <target> */ -#define R_pcrel24_call_x 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */ -#define R_var_eq_symb 15 /* 0xf, linker should treat it same as 0x12 */ -#define R_byte_data 16 /* 0x10, .byte var = symbol */ -#define R_byte2_data 17 /* 0x11, .byte2 var = symbol */ -#define R_byte4_data 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ -#define R_pcrel11 19 /* 0x13, lsetup part b */ -#define R_unused14 20 /* 0x14, undefined */ -#define R_unused15 21 /* not generated by VDSP 3.5 */ +#define R_BFIN_UNUSED0 0 /* relocation type 0 is not defined */ +#define R_BFIN_PCREL5M2 1 /* LSETUP part a */ +#define R_BFIN_UNUSED1 2 /* relocation type 2 is not defined */ +#define R_BFIN_PCREL10 3 /* type 3, if cc jump <target> */ +#define R_BFIN_PCREL12_JUMP 4 /* type 4, jump <target> */ +#define R_BFIN_RIMM16 5 /* type 0x5, rN = <target> */ +#define R_BFIN_LUIMM16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */ +#define R_BFIN_HUIMM16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */ +#define R_BFIN_PCREL12_JUMP_S 8 /* # 0x8 jump.s <target> */ +#define R_BFIN_PCREL24_JUMP_X 9 /* # 0x9 jump.x <target> */ +#define R_BFIN_PCREL24 10 /* # 0xa call <target> , not expandable */ +#define R_BFIN_UNUSEDB 11 /* # 0xb not generated */ +#define R_BFIN_UNUSEDC 12 /* # 0xc not used */ +#define R_BFIN_PCREL24_JUMP_L 13 /* 0xd jump.l <target> */ +#define R_BFIN_PCREL24_CALL_X 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */ +#define R_BFIN_VAR_EQ_SYMB 15 /* 0xf, linker should treat it same as 0x12 */ +#define R_BFIN_BYTE_DATA 16 /* 0x10, .byte var = symbol */ +#define R_BFIN_BYTE2_DATA 17 /* 0x11, .byte2 var = symbol */ +#define R_BFIN_BYTE4_DATA 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ +#define R_BFIN_PCREL11 19 /* 0x13, lsetup part b */ +#define R_BFIN_UNUSED14 20 /* 0x14, undefined */ +#define R_BFIN_UNUSED15 21 /* not generated by VDSP 3.5 */ /* arithmetic relocations */ -#define R_push 0xE0 -#define R_const 0xE1 -#define R_add 0xE2 -#define R_sub 0xE3 -#define R_mult 0xE4 -#define R_div 0xE5 -#define R_mod 0xE6 -#define R_lshift 0xE7 -#define R_rshift 0xE8 -#define R_and 0xE9 -#define R_or 0xEA -#define R_xor 0xEB -#define R_land 0xEC -#define R_lor 0xED -#define R_len 0xEE -#define R_neg 0xEF -#define R_comp 0xF0 -#define R_page 0xF1 -#define R_hwpage 0xF2 -#define R_addr 0xF3 +#define R_BFIN_PUSH 0xE0 +#define R_BFIN_CONST 0xE1 +#define R_BFIN_ADD 0xE2 +#define R_BFIN_SUB 0xE3 +#define R_BFIN_MULT 0xE4 +#define R_BFIN_DIV 0xE5 +#define R_BFIN_MOD 0xE6 +#define R_BFIN_LSHIFT 0xE7 +#define R_BFIN_RSHIFT 0xE8 +#define R_BFIN_AND 0xE9 +#define R_BFIN_OR 0xEA +#define R_BFIN_XOR 0xEB +#define R_BFIN_LAND 0xEC +#define R_BFIN_LOR 0xED +#define R_BFIN_LEN 0xEE +#define R_BFIN_NEG 0xEF +#define R_BFIN_COMP 0xF0 +#define R_BFIN_PAGE 0xF1 +#define R_BFIN_HWPAGE 0xF2 +#define R_BFIN_ADDR 0xF3 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical use of this is to invoke "./ld.so someprog" to test out a new version of diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h index b30a2968e27..ec58efc130e 100644 --- a/arch/blackfin/include/asm/entry.h +++ b/arch/blackfin/include/asm/entry.h @@ -35,21 +35,39 @@ #else # define LOAD_IPIPE_IPEND #endif + +#ifndef CONFIG_EXACT_HWERR +/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on, + * otherwise it is a waste of cycles. + */ +# ifndef CONFIG_DEBUG_KERNEL +#define INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R0 = (N); \ + LOAD_IPIPE_IPEND \ + jump __common_int_entry; +# else /* CONFIG_DEBUG_KERNEL */ #define INTERRUPT_ENTRY(N) \ [--sp] = SYSCFG; \ - \ [--sp] = P0; /*orig_p0*/ \ [--sp] = R0; /*orig_r0*/ \ [--sp] = (R7:0,P5:0); \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ R0 = (N); \ LOAD_IPIPE_IPEND \ jump __common_int_entry; +# endif /* CONFIG_DEBUG_KERNEL */ /* For timer interrupts, we need to save IPEND, since the user_mode - macro accesses it to determine where to account time. */ + *macro accesses it to determine where to account time. + */ #define TIMER_INTERRUPT_ENTRY(N) \ [--sp] = SYSCFG; \ - \ [--sp] = P0; /*orig_p0*/ \ [--sp] = R0; /*orig_r0*/ \ [--sp] = (R7:0,P5:0); \ @@ -58,6 +76,74 @@ r1 = [p0]; \ R0 = (N); \ jump __common_int_entry; +#else /* CONFIG_EXACT_HWERR is defined */ + +/* if we want hardware error to be exact, we need to do a SSYNC (which forces + * read/writes to complete to the memory controllers), and check to see that + * caused a pending HW error condition. If so, we assume it was caused by user + * space, by setting the same interrupt that we are in (so it goes off again) + * and context restore, and a RTI (without servicing anything). This should + * cause the pending HWERR to fire, and when that is done, this interrupt will + * be re-serviced properly. + * As you can see by the code - we actually need to do two SSYNCS - one to + * make sure the read/writes complete, and another to make sure the hardware + * error is recognized by the core. + */ +#define INTERRUPT_ENTRY(N) \ + SSYNC; \ + SSYNC; \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R1 = ASTAT; \ + P0.L = LO(ILAT); \ + P0.H = HI(ILAT); \ + R0 = [P0]; \ + CC = BITTST(R0, EVT_IVHW_P); \ + IF CC JUMP 1f; \ + ASTAT = R1; \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + LOAD_IPIPE_IPEND \ + jump __common_int_entry; \ +1: ASTAT = R1; \ + RAISE N; \ + (R7:0, P5:0) = [SP++]; \ + SP += 0x8; \ + SYSCFG = [SP++]; \ + CSYNC; \ + RTI; + +#define TIMER_INTERRUPT_ENTRY(N) \ + SSYNC; \ + SSYNC; \ + [--sp] = SYSCFG; \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R1 = ASTAT; \ + P0.L = LO(ILAT); \ + P0.H = HI(ILAT); \ + R0 = [P0]; \ + CC = BITTST(R0, EVT_IVHW_P); \ + IF CC JUMP 1f; \ + ASTAT = R1; \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + jump __common_int_entry; \ +1: ASTAT = R1; \ + RAISE N; \ + (R7:0, P5:0) = [SP++]; \ + SP += 0x8; \ + SYSCFG = [SP++]; \ + CSYNC; \ + RTI; +#endif /* CONFIG_EXACT_HWERR */ /* This one pushes RETI without using CLI. Interrupts are enabled. */ #define SAVE_CONTEXT_SYSCALL save_context_syscall diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index e70074e05f4..733a178d782 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include <asm/unaligned.h> -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index b0f847ae4bf..89f08decb8e 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -30,6 +30,7 @@ # else # define MAX_BLACKFIN_GPTIMERS 11 # define TIMER8_GROUP_REG TIMER_ENABLE1 +# define TIMER_GROUP2 1 # endif # define TIMER0_GROUP_REG TIMER_ENABLE0 #endif @@ -40,10 +41,12 @@ # define MAX_BLACKFIN_GPTIMERS 12 # define TIMER0_GROUP_REG TMRS8_ENABLE # define TIMER8_GROUP_REG TMRS4_ENABLE +# define TIMER_GROUP2 1 #endif /* * All others: 3 timers: */ +#define TIMER_GROUP1 0 #if !defined(MAX_BLACKFIN_GPTIMERS) # define MAX_BLACKFIN_GPTIMERS 3 # define TIMER0_GROUP_REG TIMER_ENABLE @@ -109,8 +112,8 @@ #define TIMER_ERR_PROG_PER 0x8000 #define TIMER_ERR_PROG_PW 0xC000 #define TIMER_EMU_RUN 0x0200 -#define TIMER_TOGGLE_HI 0x0100 -#define TIMER_CLK_SEL 0x0080 +#define TIMER_TOGGLE_HI 0x0100 +#define TIMER_CLK_SEL 0x0080 #define TIMER_OUT_DIS 0x0040 #define TIMER_TIN_SEL 0x0020 #define TIMER_IRQ_ENA 0x0010 @@ -169,23 +172,25 @@ /* The actual gptimer API */ -void set_gptimer_pwidth (int timer_id, uint32_t width); -uint32_t get_gptimer_pwidth (int timer_id); -void set_gptimer_period (int timer_id, uint32_t period); -uint32_t get_gptimer_period (int timer_id); -uint32_t get_gptimer_count (int timer_id); -uint16_t get_gptimer_intr (int timer_id); -void clear_gptimer_intr (int timer_id); -uint16_t get_gptimer_over (int timer_id); -void clear_gptimer_over (int timer_id); -void set_gptimer_config (int timer_id, uint16_t config); -uint16_t get_gptimer_config (int timer_id); -void set_gptimer_pulse_hi (int timer_id); +void set_gptimer_pwidth(int timer_id, uint32_t width); +uint32_t get_gptimer_pwidth(int timer_id); +void set_gptimer_period(int timer_id, uint32_t period); +uint32_t get_gptimer_period(int timer_id); +uint32_t get_gptimer_count(int timer_id); +int get_gptimer_intr(int timer_id); +void clear_gptimer_intr(int timer_id); +int get_gptimer_over(int timer_id); +void clear_gptimer_over(int timer_id); +void set_gptimer_config(int timer_id, uint16_t config); +uint16_t get_gptimer_config(int timer_id); +int get_gptimer_run(int timer_id); +void set_gptimer_pulse_hi(int timer_id); void clear_gptimer_pulse_hi(int timer_id); -void enable_gptimers (uint16_t mask); -void disable_gptimers (uint16_t mask); -uint16_t get_enabled_gptimers (void); -uint32_t get_gptimer_status (int group); -void set_gptimer_status (int group, uint32_t value); +void enable_gptimers(uint16_t mask); +void disable_gptimers(uint16_t mask); +void disable_gptimers_sync(uint16_t mask); +uint16_t get_enabled_gptimers(void); +uint32_t get_gptimer_status(int group); +void set_gptimer_status(int group, uint32_t value); #endif diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 63b2d8c7857..3022b5c96b3 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -80,19 +80,22 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) +/* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */ +#define __io(port) ((void *)(unsigned long)(port)) + +#define inb(port) readb(__io(port)) +#define inw(port) readw(__io(port)) +#define inl(port) readl(__io(port)) +#define outb(x,port) writeb(x,__io(port)) +#define outw(x,port) writew(x,__io(port)) +#define outl(x,port) writel(x,__io(port)) + +#define inb_p(port) inb(__io(port)) +#define inw_p(port) inw(__io(port)) +#define inl_p(port) inl(__io(port)) +#define outb_p(x,port) outb(x,__io(port)) +#define outw_p(x,port) outw(x,__io(port)) +#define outl_p(x,port) outl(x,__io(port)) #define ioread8_rep(a,d,c) readsb(a,d,c) #define ioread16_rep(a,d,c) readsw(a,d,c) diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 343b56361ec..51d0bf5e289 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,10 +35,10 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.9-00" +#define IPIPE_ARCH_STRING "1.9-01" #define IPIPE_MAJOR_NUMBER 1 #define IPIPE_MINOR_NUMBER 9 -#define IPIPE_PATCH_NUMBER 0 +#define IPIPE_PATCH_NUMBER 1 #ifdef CONFIG_SMP #error "I-pipe/blackfin: SMP not implemented" diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 344f6a8c1f2..3ea2016a1d4 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -81,7 +81,7 @@ extern unsigned long memory_end; #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ ((void *)(kaddr) < (void *)memory_end)) -#include <asm-generic/page.h> +#include <asm-generic/getorder.h> #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index a67142740df..b42555c1431 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -64,8 +64,6 @@ struct blackfin_pda { /* Per-processor Data Area */ extern struct blackfin_pda cpu_pda[]; -void reserve_pda(void); - #endif /* __ASSEMBLY__ */ #endif /* _ASM_BLACKFIN_PDA_H */ diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 0eece23b41c..3040415523b 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -131,8 +131,8 @@ unsigned long get_wchan(struct task_struct *p); /* Get the Silicon Revision of the chip */ static inline uint32_t __pure bfin_revid(void) { - /* stored in the upper 4 bits */ - uint32_t revid = bfin_read_CHIPID() >> 28; + /* Always use CHIPID, to work around ANOMALY_05000234 */ + uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28; #ifdef CONFIG_BF52x /* ANOMALY_05000357 diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h index 87951d25145..2eea9079445 100644 --- a/arch/blackfin/include/asm/signal.h +++ b/arch/blackfin/include/asm/signal.h @@ -104,7 +104,7 @@ typedef unsigned long sigset_t; #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 -#include <asm-generic/signal.h> +#include <asm-generic/signal-defs.h> #ifdef __KERNEL__ struct old_sigaction { diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h index ddc43ce3853..589e937ed1e 100644 --- a/arch/blackfin/include/asm/time.h +++ b/arch/blackfin/include/asm/time.h @@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off; extern unsigned int __bfin_cycles_mod; #endif +extern void __init setup_core_timer(void); #endif diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 3248033531e..8894e9ffbb5 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -59,12 +59,8 @@ static inline int is_in_rom(unsigned long addr) #ifndef CONFIG_ACCESS_CHECK static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } #else -#ifdef CONFIG_ACCESS_OK_L1 -extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); -#else extern int _access_ok(unsigned long addr, unsigned long size); #endif -#endif /* * The exception table consists of pairs of addresses: the first is the @@ -83,9 +79,6 @@ struct exception_table_entry { unsigned long insn, fixup; }; -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. @@ -233,16 +226,29 @@ strncpy_from_user(char *dst, const char *src, long count) } /* - * Return the size of a string (including the ending 0) + * Get the size of a string in user space. + * src: The string to measure + * n: The maximum valid length * - * Return 0 on exception, a value greater than N if too long + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than n. */ -static inline long strnlen_user(const char *src, long n) +static inline long __must_check strnlen_user(const char *src, long n) { - return (strlen(src) + 1); + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return strnlen(src, n) + 1; } -#define strlen_user(str) strnlen_user(str, 32767) +static inline long __must_check strlen_user(const char *src) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return strlen(src) + 1; +} /* * Zero Userspace @@ -251,6 +257,8 @@ static inline long strnlen_user(const char *src, long n) static inline unsigned long __must_check __clear_user(void *to, unsigned long n) { + if (!access_ok(VERIFY_WRITE, to, n)) + return n; memset(to, 0, n); return 0; } diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 1e57b636e0b..cf5066d3efd 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_dup3 363 #define __NR_pipe2 364 #define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 -#define __NR_syscall 366 +#define __NR_syscall 368 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ |