summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/include/asm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/include/asm')
-rw-r--r--arch/blackfin/include/asm/bfin-lq035q1.h12
-rw-r--r--arch/blackfin/include/asm/bfin_can.h725
-rw-r--r--arch/blackfin/include/asm/bfin_sport.h227
-rw-r--r--arch/blackfin/include/asm/bfin_watchdog.h30
-rw-r--r--arch/blackfin/include/asm/bitops.h74
-rw-r--r--arch/blackfin/include/asm/context.S22
-rw-r--r--arch/blackfin/include/asm/cpu.h2
-rw-r--r--arch/blackfin/include/asm/def_LPBlackfin.h58
-rw-r--r--arch/blackfin/include/asm/delay.h16
-rw-r--r--arch/blackfin/include/asm/dma-mapping.h15
-rw-r--r--arch/blackfin/include/asm/dma.h4
-rw-r--r--arch/blackfin/include/asm/dpmc.h4
-rw-r--r--arch/blackfin/include/asm/elf.h8
-rw-r--r--arch/blackfin/include/asm/ftrace.h53
-rw-r--r--arch/blackfin/include/asm/gpio.h17
-rw-r--r--arch/blackfin/include/asm/irq.h7
-rw-r--r--arch/blackfin/include/asm/mmu_context.h14
-rw-r--r--arch/blackfin/include/asm/nmi.h12
-rw-r--r--arch/blackfin/include/asm/page.h3
-rw-r--r--arch/blackfin/include/asm/ptrace.h25
-rw-r--r--arch/blackfin/include/asm/sections.h3
-rw-r--r--arch/blackfin/include/asm/smp.h15
-rw-r--r--arch/blackfin/include/asm/syscall.h96
-rw-r--r--arch/blackfin/include/asm/thread_info.h25
-rw-r--r--arch/blackfin/include/asm/time.h13
25 files changed, 1284 insertions, 196 deletions
diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h
index 57bc21ac229..836895156b5 100644
--- a/arch/blackfin/include/asm/bfin-lq035q1.h
+++ b/arch/blackfin/include/asm/bfin-lq035q1.h
@@ -8,6 +8,9 @@
#ifndef BFIN_LQ035Q1_H
#define BFIN_LQ035Q1_H
+/*
+ * LCD Modes
+ */
#define LQ035_RL (0 << 8) /* Right -> Left Scan */
#define LQ035_LR (1 << 8) /* Left -> Right Scan */
#define LQ035_TB (1 << 9) /* Top -> Botton Scan */
@@ -17,9 +20,18 @@
#define LQ035_NORM (1 << 13) /* Reversal */
#define LQ035_REV (0 << 13) /* Reversal */
+/*
+ * PPI Modes
+ */
+
+#define USE_RGB565_16_BIT_PPI 1
+#define USE_RGB565_8_BIT_PPI 2
+#define USE_RGB888_8_BIT_PPI 3
+
struct bfin_lq035q1fb_disp_info {
unsigned mode;
+ unsigned ppi_mode;
/* GPIOs */
int use_bl;
unsigned gpio_bl;
diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h
new file mode 100644
index 00000000000..eec0076a385
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_can.h
@@ -0,0 +1,725 @@
+/*
+ * bfin_can.h - interface to Blackfin CANs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_CAN_H__
+#define __ASM_BFIN_CAN_H__
+
+/*
+ * transmit and receive channels
+ */
+#define TRANSMIT_CHL 24
+#define RECEIVE_STD_CHL 0
+#define RECEIVE_EXT_CHL 4
+#define RECEIVE_RTR_CHL 8
+#define RECEIVE_EXT_RTR_CHL 12
+#define MAX_CHL_NUMBER 32
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits. So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin can registers layout
+ */
+struct bfin_can_mask_regs {
+ __BFP(aml);
+ __BFP(amh);
+};
+
+struct bfin_can_channel_regs {
+ u16 data[8];
+ __BFP(dlc);
+ __BFP(tsv);
+ __BFP(id0);
+ __BFP(id1);
+};
+
+struct bfin_can_regs {
+ /*
+ * global control and status registers
+ */
+ __BFP(mc1); /* offset 0x00 */
+ __BFP(md1); /* offset 0x04 */
+ __BFP(trs1); /* offset 0x08 */
+ __BFP(trr1); /* offset 0x0c */
+ __BFP(ta1); /* offset 0x10 */
+ __BFP(aa1); /* offset 0x14 */
+ __BFP(rmp1); /* offset 0x18 */
+ __BFP(rml1); /* offset 0x1c */
+ __BFP(mbtif1); /* offset 0x20 */
+ __BFP(mbrif1); /* offset 0x24 */
+ __BFP(mbim1); /* offset 0x28 */
+ __BFP(rfh1); /* offset 0x2c */
+ __BFP(opss1); /* offset 0x30 */
+ u32 __pad1[3];
+ __BFP(mc2); /* offset 0x40 */
+ __BFP(md2); /* offset 0x44 */
+ __BFP(trs2); /* offset 0x48 */
+ __BFP(trr2); /* offset 0x4c */
+ __BFP(ta2); /* offset 0x50 */
+ __BFP(aa2); /* offset 0x54 */
+ __BFP(rmp2); /* offset 0x58 */
+ __BFP(rml2); /* offset 0x5c */
+ __BFP(mbtif2); /* offset 0x60 */
+ __BFP(mbrif2); /* offset 0x64 */
+ __BFP(mbim2); /* offset 0x68 */
+ __BFP(rfh2); /* offset 0x6c */
+ __BFP(opss2); /* offset 0x70 */
+ u32 __pad2[3];
+ __BFP(clock); /* offset 0x80 */
+ __BFP(timing); /* offset 0x84 */
+ __BFP(debug); /* offset 0x88 */
+ __BFP(status); /* offset 0x8c */
+ __BFP(cec); /* offset 0x90 */
+ __BFP(gis); /* offset 0x94 */
+ __BFP(gim); /* offset 0x98 */
+ __BFP(gif); /* offset 0x9c */
+ __BFP(control); /* offset 0xa0 */
+ __BFP(intr); /* offset 0xa4 */
+ u32 __pad3[1];
+ __BFP(mbtd); /* offset 0xac */
+ __BFP(ewr); /* offset 0xb0 */
+ __BFP(esr); /* offset 0xb4 */
+ u32 __pad4[2];
+ __BFP(ucreg); /* offset 0xc0 */
+ __BFP(uccnt); /* offset 0xc4 */
+ __BFP(ucrc); /* offset 0xc8 */
+ __BFP(uccnf); /* offset 0xcc */
+ u32 __pad5[12];
+
+ /*
+ * channel(mailbox) mask and message registers
+ */
+ struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */
+ struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
+};
+
+#undef __BFP
+
+/* CAN_CONTROL Masks */
+#define SRS 0x0001 /* Software Reset */
+#define DNM 0x0002 /* Device Net Mode */
+#define ABO 0x0004 /* Auto-Bus On Enable */
+#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */
+#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
+#define SMR 0x0020 /* Sleep Mode Request */
+#define CSR 0x0040 /* CAN Suspend Mode Request */
+#define CCR 0x0080 /* CAN Configuration Mode Request */
+
+/* CAN_STATUS Masks */
+#define WT 0x0001 /* TX Warning Flag */
+#define WR 0x0002 /* RX Warning Flag */
+#define EP 0x0004 /* Error Passive Mode */
+#define EBO 0x0008 /* Error Bus Off Mode */
+#define SMA 0x0020 /* Sleep Mode Acknowledge */
+#define CSA 0x0040 /* Suspend Mode Acknowledge */
+#define CCA 0x0080 /* Configuration Mode Acknowledge */
+#define MBPTR 0x1F00 /* Mailbox Pointer */
+#define TRM 0x4000 /* Transmit Mode */
+#define REC 0x8000 /* Receive Mode */
+
+/* CAN_CLOCK Masks */
+#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
+
+/* CAN_TIMING Masks */
+#define TSEG1 0x000F /* Time Segment 1 */
+#define TSEG2 0x0070 /* Time Segment 2 */
+#define SAM 0x0080 /* Sampling */
+#define SJW 0x0300 /* Synchronization Jump Width */
+
+/* CAN_DEBUG Masks */
+#define DEC 0x0001 /* Disable CAN Error Counters */
+#define DRI 0x0002 /* Disable CAN RX Input */
+#define DTO 0x0004 /* Disable CAN TX Output */
+#define DIL 0x0008 /* Disable CAN Internal Loop */
+#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
+#define MRB 0x0020 /* Mode Read Back Enable */
+#define CDE 0x8000 /* CAN Debug Enable */
+
+/* CAN_CEC Masks */
+#define RXECNT 0x00FF /* Receive Error Counter */
+#define TXECNT 0xFF00 /* Transmit Error Counter */
+
+/* CAN_INTR Masks */
+#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */
+#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */
+#define GIRQ 0x0004 /* Global Interrupt */
+#define SMACK 0x0008 /* Sleep Mode Acknowledge */
+#define CANTX 0x0040 /* CAN TX Bus Value */
+#define CANRX 0x0080 /* CAN RX Bus Value */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
+#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
+#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
+#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
+#define BASEID 0x1FFC /* Base Identifier */
+#define IDE 0x2000 /* Identifier Extension */
+#define RTR 0x4000 /* Remote Frame Transmission Request */
+#define AME 0x8000 /* Acceptance Mask Enable */
+
+/* CAN_MBxx_TIMESTAMP Masks */
+#define TSV 0xFFFF /* Timestamp */
+
+/* CAN_MBxx_LENGTH Masks */
+#define DLC 0x000F /* Data Length Code */
+
+/* CAN_AMxxH and CAN_AMxxL Masks */
+#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
+#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
+#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
+#define BASEID 0x1FFC /* Base Identifier */
+#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
+#define FMD 0x4000 /* Full Mask Data Field Enable */
+#define FDF 0x8000 /* Filter On Data Field Enable */
+
+/* CAN_MC1 Masks */
+#define MC0 0x0001 /* Enable Mailbox 0 */
+#define MC1 0x0002 /* Enable Mailbox 1 */
+#define MC2 0x0004 /* Enable Mailbox 2 */
+#define MC3 0x0008 /* Enable Mailbox 3 */
+#define MC4 0x0010 /* Enable Mailbox 4 */
+#define MC5 0x0020 /* Enable Mailbox 5 */
+#define MC6 0x0040 /* Enable Mailbox 6 */
+#define MC7 0x0080 /* Enable Mailbox 7 */
+#define MC8 0x0100 /* Enable Mailbox 8 */
+#define MC9 0x0200 /* Enable Mailbox 9 */
+#define MC10 0x0400 /* Enable Mailbox 10 */
+#define MC11 0x0800 /* Enable Mailbox 11 */
+#define MC12 0x1000 /* Enable Mailbox 12 */
+#define MC13 0x2000 /* Enable Mailbox 13 */
+#define MC14 0x4000 /* Enable Mailbox 14 */
+#define MC15 0x8000 /* Enable Mailbox 15 */
+
+/* CAN_MC2 Masks */
+#define MC16 0x0001 /* Enable Mailbox 16 */
+#define MC17 0x0002 /* Enable Mailbox 17 */
+#define MC18 0x0004 /* Enable Mailbox 18 */
+#define MC19 0x0008 /* Enable Mailbox 19 */
+#define MC20 0x0010 /* Enable Mailbox 20 */
+#define MC21 0x0020 /* Enable Mailbox 21 */
+#define MC22 0x0040 /* Enable Mailbox 22 */
+#define MC23 0x0080 /* Enable Mailbox 23 */
+#define MC24 0x0100 /* Enable Mailbox 24 */
+#define MC25 0x0200 /* Enable Mailbox 25 */
+#define MC26 0x0400 /* Enable Mailbox 26 */
+#define MC27 0x0800 /* Enable Mailbox 27 */
+#define MC28 0x1000 /* Enable Mailbox 28 */
+#define MC29 0x2000 /* Enable Mailbox 29 */
+#define MC30 0x4000 /* Enable Mailbox 30 */
+#define MC31 0x8000 /* Enable Mailbox 31 */
+
+/* CAN_MD1 Masks */
+#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
+#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
+#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
+#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
+#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
+#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
+#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
+#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
+#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
+#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
+#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
+#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
+#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
+#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
+#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
+#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
+
+/* CAN_MD2 Masks */
+#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
+#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
+#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
+#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
+#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
+#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
+#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
+#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
+#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
+#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
+#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
+#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
+#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
+#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
+#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
+#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
+
+/* CAN_RMP1 Masks */
+#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
+#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
+#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
+#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
+#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
+#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
+#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
+#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
+#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
+#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
+#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
+#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
+#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
+#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
+#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
+#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
+
+/* CAN_RMP2 Masks */
+#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
+#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
+#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
+#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
+#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
+#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
+#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
+#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
+#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
+#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
+#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
+#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
+#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
+#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
+#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
+#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
+
+/* CAN_RML1 Masks */
+#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
+#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
+#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
+#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
+#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
+#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
+#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
+#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
+#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
+#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
+#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
+#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
+#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
+#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
+#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
+#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
+
+/* CAN_RML2 Masks */
+#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
+#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
+#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
+#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
+#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
+#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
+#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
+#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
+#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
+#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
+#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
+#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
+#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
+#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
+#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
+#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
+
+/* CAN_OPSS1 Masks */
+#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
+#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
+#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
+#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
+#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
+#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
+#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
+#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
+#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
+#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
+#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
+#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
+#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
+#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
+#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
+#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
+
+/* CAN_OPSS2 Masks */
+#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
+#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
+#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
+#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
+#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
+#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
+#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
+#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
+#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
+#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
+#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
+#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
+#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
+#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
+#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
+#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
+
+/* CAN_TRR1 Masks */
+#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
+#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
+#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
+#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
+#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
+#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
+#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
+#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
+#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
+#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
+#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
+#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
+#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
+#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
+#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
+#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
+
+/* CAN_TRR2 Masks */
+#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
+#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
+#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
+#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
+#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
+#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
+#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
+#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
+#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
+#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
+#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
+#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
+#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
+#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
+#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
+#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
+
+/* CAN_TRS1 Masks */
+#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
+#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
+#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
+#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
+#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
+#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
+#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
+#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
+#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
+#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
+#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
+#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
+#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
+#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
+#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
+#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
+
+/* CAN_TRS2 Masks */
+#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
+#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
+#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
+#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
+#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
+#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
+#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
+#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
+#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
+#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
+#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
+#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
+#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
+#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
+#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
+#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
+
+/* CAN_AA1 Masks */
+#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
+#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
+#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
+#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
+#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
+#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
+#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
+#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
+#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
+#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
+#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
+#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
+#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
+#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
+#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
+#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
+
+/* CAN_AA2 Masks */
+#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
+#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
+#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
+#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
+#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
+#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
+#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
+#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
+#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
+#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
+#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
+#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
+#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
+#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
+#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
+#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
+
+/* CAN_TA1 Masks */
+#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
+#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
+#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
+#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
+#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
+#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
+#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
+#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
+#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
+#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
+#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
+#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
+#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
+#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
+#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
+#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
+
+/* CAN_TA2 Masks */
+#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
+#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
+#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
+#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
+#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
+#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
+#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
+#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
+#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
+#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
+#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
+#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
+#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
+#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
+#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
+#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
+
+/* CAN_MBTD Masks */
+#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
+#define TDA 0x0040 /* Temporary Disable Acknowledge */
+#define TDR 0x0080 /* Temporary Disable Request */
+
+/* CAN_RFH1 Masks */
+#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
+#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
+#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
+#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
+#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
+#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
+#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
+#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
+#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
+#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
+#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
+#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
+#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
+#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
+#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
+#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
+
+/* CAN_RFH2 Masks */
+#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
+#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
+#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
+#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
+#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
+#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
+#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
+#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
+#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
+#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
+#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
+#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
+#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
+#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
+#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
+#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
+
+/* CAN_MBTIF1 Masks */
+#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
+#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
+#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
+#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
+#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
+#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
+#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
+#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
+#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
+#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
+#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
+#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
+#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
+#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
+#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
+#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBTIF2 Masks */
+#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
+#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
+#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
+#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
+#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
+#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
+#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
+#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
+#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
+#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
+#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
+#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
+#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
+#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
+#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
+#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBRIF1 Masks */
+#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
+#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
+#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
+#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
+#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
+#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
+#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
+#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
+#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
+#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
+#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
+#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
+#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
+#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
+#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
+#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBRIF2 Masks */
+#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
+#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
+#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
+#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
+#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
+#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
+#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
+#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
+#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
+#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
+#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
+#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
+#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
+#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
+#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
+#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBIM1 Masks */
+#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
+#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
+#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
+#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
+#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
+#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
+#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
+#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
+#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
+#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
+#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
+#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
+#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
+#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
+#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
+#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
+
+/* CAN_MBIM2 Masks */
+#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
+#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
+#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
+#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
+#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
+#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
+#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
+#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
+#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
+#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
+#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
+#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
+#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
+#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
+#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
+#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
+
+/* CAN_GIM Masks */
+#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
+#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
+#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
+#define BOIM 0x0008 /* Enable Bus Off Interrupt */
+#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
+#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
+#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
+#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
+#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
+#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
+#define ADIM 0x0400 /* Enable Access Denied Interrupt */
+
+/* CAN_GIS Masks */
+#define EWTIS 0x0001 /* TX Error Count IRQ Status */
+#define EWRIS 0x0002 /* RX Error Count IRQ Status */
+#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
+#define BOIS 0x0008 /* Bus Off IRQ Status */
+#define WUIS 0x0010 /* Wake-Up IRQ Status */
+#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
+#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
+#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
+#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
+#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
+#define ADIS 0x0400 /* Access Denied IRQ Status */
+
+/* CAN_GIF Masks */
+#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
+#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
+#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
+#define BOIF 0x0008 /* Bus Off IRQ Flag */
+#define WUIF 0x0010 /* Wake-Up IRQ Flag */
+#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
+#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
+#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
+#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
+#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
+#define ADIF 0x0400 /* Access Denied IRQ Flag */
+
+/* CAN_UCCNF Masks */
+#define UCCNF 0x000F /* Universal Counter Mode */
+#define UC_STAMP 0x0001 /* Timestamp Mode */
+#define UC_WDOG 0x0002 /* Watchdog Mode */
+#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
+#define UC_ERROR 0x0006 /* CAN Error Frame Count */
+#define UC_OVER 0x0007 /* CAN Overload Frame Count */
+#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
+#define UC_AA 0x0009 /* TX Abort Count */
+#define UC_TA 0x000A /* TX Successful Count */
+#define UC_REJECT 0x000B /* RX Message Rejected Count */
+#define UC_RML 0x000C /* RX Message Lost Count */
+#define UC_RX 0x000D /* Total Successful RX Messages Count */
+#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
+#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
+#define UCRC 0x0020 /* Universal Counter Reload/Clear */
+#define UCCT 0x0040 /* Universal Counter CAN Trigger */
+#define UCE 0x0080 /* Universal Counter Enable */
+
+/* CAN_ESR Masks */
+#define ACKE 0x0004 /* Acknowledge Error */
+#define SER 0x0008 /* Stuff Error */
+#define CRCE 0x0010 /* CRC Error */
+#define SA0 0x0020 /* Stuck At Dominant Error */
+#define BEF 0x0040 /* Bit Error Flag */
+#define FER 0x0080 /* Form Error Flag */
+
+/* CAN_EWR Masks */
+#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
+#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index b558908e1c7..9626cf7e425 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,7 +1,7 @@
/*
- * bfin_sport.h - userspace header for bfin sport driver
+ * bfin_sport.h - interface to Blackfin SPORTs
*
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -9,16 +9,6 @@
#ifndef __BFIN_SPORT_H__
#define __BFIN_SPORT_H__
-#ifdef __KERNEL__
-#include <linux/cdev.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#endif
-
-#define SPORT_MAJOR 237
-#define SPORT_NR_DEVS 2
-
/* Sport mode: it can be set to TDM, i2s or others */
#define NORM_MODE 0x0
#define TDM_MODE 0x1
@@ -35,7 +25,7 @@ struct sport_config {
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
- int channels; /* Must be in 8 units */
+ int channels; /* Must be in 8 units */
unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */
/* I2S mode */
@@ -69,94 +59,137 @@ struct sport_config {
#ifdef __KERNEL__
-struct sport_register {
- unsigned short tcr1;
- unsigned short reserved0;
- unsigned short tcr2;
- unsigned short reserved1;
- unsigned short tclkdiv;
- unsigned short reserved2;
- unsigned short tfsdiv;
- unsigned short reserved3;
- unsigned long tx;
- unsigned long reserved_l0;
- unsigned long rx;
- unsigned long reserved_l1;
- unsigned short rcr1;
- unsigned short reserved4;
- unsigned short rcr2;
- unsigned short reserved5;
- unsigned short rclkdiv;
- unsigned short reserved6;
- unsigned short rfsdiv;
- unsigned short reserved7;
- unsigned short stat;
- unsigned short reserved8;
- unsigned short chnl;
- unsigned short reserved9;
- unsigned short mcmc1;
- unsigned short reserved10;
- unsigned short mcmc2;
- unsigned short reserved11;
- unsigned long mtcs0;
- unsigned long mtcs1;
- unsigned long mtcs2;
- unsigned long mtcs3;
- unsigned long mrcs0;
- unsigned long mrcs1;
- unsigned long mrcs2;
- unsigned long mrcs3;
-};
-
-struct sport_dev {
- struct cdev cdev; /* Char device structure */
-
- int sport_num;
+#include <linux/types.h>
- int dma_rx_chan;
- int dma_tx_chan;
-
- int rx_irq;
- unsigned char *rx_buf; /* Buffer store the received data */
- int rx_len; /* How many bytes will be received */
- int rx_received; /* How many bytes has been received */
-
- int tx_irq;
- const unsigned char *tx_buf;
- int tx_len;
- int tx_sent;
-
- int err_irq;
-
- struct mutex mutex; /* mutual exclusion semaphore */
- struct task_struct *task;
-
- wait_queue_head_t waitq;
- int wait_con;
- struct sport_register *regs;
- struct sport_config config;
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits. So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct sport_register {
+ __BFP(tcr1);
+ __BFP(tcr2);
+ __BFP(tclkdiv);
+ __BFP(tfsdiv);
+ union {
+ u32 tx32;
+ u16 tx16;
+ };
+ u32 __pad_tx;
+ union {
+ u32 rx32; /* use the anomaly wrapper below */
+ u16 rx16;
+ };
+ u32 __pad_rx;
+ __BFP(rcr1);
+ __BFP(rcr2);
+ __BFP(rclkdiv);
+ __BFP(rfsdiv);
+ __BFP(stat);
+ __BFP(chnl);
+ __BFP(mcmc1);
+ __BFP(mcmc2);
+ u32 mtcs0;
+ u32 mtcs1;
+ u32 mtcs2;
+ u32 mtcs3;
+ u32 mrcs0;
+ u32 mrcs1;
+ u32 mrcs2;
+ u32 mrcs3;
};
+#undef __BFP
+
+#define bfin_read_sport_rx32(base) \
+({ \
+ struct sport_register *__mmrs = (void *)base; \
+ u32 __ret; \
+ unsigned long flags; \
+ if (ANOMALY_05000473) \
+ local_irq_save(flags); \
+ __ret = __mmrs->rx32; \
+ if (ANOMALY_05000473) \
+ local_irq_restore(flags); \
+ __ret; \
+})
#endif
-#define SPORT_TCR1 0
-#define SPORT_TCR2 1
-#define SPORT_TCLKDIV 2
-#define SPORT_TFSDIV 3
-#define SPORT_RCR1 8
-#define SPORT_RCR2 9
-#define SPORT_RCLKDIV 10
-#define SPORT_RFSDIV 11
-#define SPORT_CHANNEL 13
-#define SPORT_MCMC1 14
-#define SPORT_MCMC2 15
-#define SPORT_MTCS0 16
-#define SPORT_MTCS1 17
-#define SPORT_MTCS2 18
-#define SPORT_MTCS3 19
-#define SPORT_MRCS0 20
-#define SPORT_MRCS1 21
-#define SPORT_MRCS2 22
-#define SPORT_MRCS3 23
+/* Workaround defBF*.h SPORT MMRs till they get cleansed */
+#undef DTYPE_NORM
+#undef SLEN
+#undef SP_WOFF
+#undef SP_WSIZE
+
+/* SPORT_TCR1 Masks */
+#define TSPEN 0x0001 /* TX enable */
+#define ITCLK 0x0002 /* Internal TX Clock Select */
+#define TDTYPE 0x000C /* TX Data Formatting Select */
+#define DTYPE_NORM 0x0000 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define TLSBIT 0x0010 /* TX Bit Order */
+#define ITFS 0x0200 /* Internal TX Frame Sync Select */
+#define TFSR 0x0400 /* TX Frame Sync Required Select */
+#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
+#define LTFS 0x1000 /* Low TX Frame Sync Select */
+#define LATFS 0x2000 /* Late TX Frame Sync Select */
+#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
+
+/* SPORT_TCR2 Masks */
+#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */
+#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x)
+#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x)
+#define TXSE 0x0100 /* TX Secondary Enable */
+#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */
+#define TRFST 0x0400 /* TX Right-First Data Order */
+
+/* SPORT_RCR1 Masks */
+#define RSPEN 0x0001 /* RX enable */
+#define IRCLK 0x0002 /* Internal RX Clock Select */
+#define RDTYPE 0x000C /* RX Data Formatting Select */
+/* DTYPE_* defined above */
+#define RLSBIT 0x0010 /* RX Bit Order */
+#define IRFS 0x0200 /* Internal RX Frame Sync Select */
+#define RFSR 0x0400 /* RX Frame Sync Required Select */
+#define LRFS 0x1000 /* Low RX Frame Sync Select */
+#define LARFS 0x2000 /* Late RX Frame Sync Select */
+#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
+
+/* SPORT_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE 0x0100 /* RX Secondary Enable */
+#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /* Right-First Data Order */
+
+/* SPORT_STAT Masks */
+#define RXNE 0x0001 /* RX FIFO Not Empty Status */
+#define RUVF 0x0002 /* RX Underflow Status */
+#define ROVF 0x0004 /* RX Overflow Status */
+#define TXF 0x0008 /* TX FIFO Full Status */
+#define TUVF 0x0010 /* TX Underflow Status */
+#define TOVF 0x0020 /* TX Overflow Status */
+#define TXHRE 0x0040 /* TX Hold Register Empty */
+
+/* SPORT_MCMC1 Masks */
+#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */
+#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x)
+#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x)
+#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */
+#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x)
+#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x)
+
+/* SPORT_MCMC2 Masks */
+#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */
+#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
+#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
+#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
+#define MFD 0xF000 /* Multichannel Frame Delay */
+#define DP_MFD(x) BFIN_DEPOSIT(MFD, x)
+#define EX_MFD(x) BFIN_EXTRACT(MFD, x)
#endif
diff --git a/arch/blackfin/include/asm/bfin_watchdog.h b/arch/blackfin/include/asm/bfin_watchdog.h
new file mode 100644
index 00000000000..dce09829a09
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_watchdog.h
@@ -0,0 +1,30 @@
+/*
+ * bfin_watchdog.h - Blackfin watchdog definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_WATCHDOG_H
+#define _BFIN_WATCHDOG_H
+
+/* Bit in SWRST that indicates boot caused by watchdog */
+#define SWRST_RESET_WDOG 0x4000
+
+/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */
+#define WDOG_EXPIRED 0x8000
+
+/* Masks for WDEV field in WDOG_CTL register */
+#define ICTL_RESET 0x0
+#define ICTL_NMI 0x2
+#define ICTL_GPI 0x4
+#define ICTL_NONE 0x6
+#define ICTL_MASK 0x6
+
+/* Masks for WDEN field in WDOG_CTL register */
+#define WDEN_MASK 0x0FF0
+#define WDEN_ENABLE 0x0000
+#define WDEN_DISABLE 0x0AD0
+
+#endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index a2ff3fb3568..605ba8e9b2e 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -7,22 +7,41 @@
#ifndef _BLACKFIN_BITOPS_H
#define _BLACKFIN_BITOPS_H
-#ifndef CONFIG_SMP
-# include <asm-generic/bitops.h>
-#else
+#include <linux/compiler.h>
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
#ifndef _LINUX_BITOPS_H
#error only <linux/bitops.h> can be included directly
#endif
-#include <linux/compiler.h>
-#include <asm/byteorder.h> /* swab32 */
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#ifndef CONFIG_SMP
+#include <linux/irqflags.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() smp_mb()
+#endif
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#else
+#include <asm/byteorder.h> /* swab32 */
#include <linux/linkage.h>
asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr);
@@ -89,19 +108,36 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
#include <asm-generic/bitops/non-atomic.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
+#endif /* CONFIG_SMP */
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
-#include <asm-generic/bitops/minix.h>
+static inline unsigned int hweight32(unsigned int w)
+{
+ unsigned int res;
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
+ __asm__ ("%0.l = ONES %0;"
+ "%0 = %0.l (Z);"
+ : "=d" (res) : "d" (w));
+ return res;
+}
-#endif /* CONFIG_SMP */
+static inline unsigned int hweight64(__u64 w)
+{
+ return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+ return hweight32(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+ return hweight32(w & 0xff);
+}
#endif /* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 5dffaf582a2..1f9060395a0 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -73,6 +73,11 @@
#else
cli r0;
#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+ sp += -12;
+ call _trace_hardirqs_off;
+ sp += 12;
+#endif
[--sp] = RETI; /*orig_pc*/
/* Clear all L registers. */
r0 = 0 (x);
@@ -279,6 +284,13 @@
RETN = [sp++];
RETX = [sp++];
RETI = [sp++];
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ sp += -12;
+ call _trace_hardirqs_on;
+ sp += 12;
+#endif
+
RETS = [sp++];
#ifdef CONFIG_SMP
@@ -374,3 +386,13 @@
(R7:0, P5:0) = [SP++];
.endm
+
+.macro pseudo_long_call func:req, scratch:req
+#ifdef CONFIG_ROMKERNEL
+ \scratch\().l = \func;
+ \scratch\().h = \func;
+ call (\scratch);
+#else
+ call \func;
+#endif
+.endm
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index b191dc662bd..16883e582e3 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -17,8 +17,6 @@ struct blackfin_cpudata {
struct task_struct *idle;
unsigned int imemctl;
unsigned int dmemctl;
- unsigned long dcache_invld_count;
- unsigned long icache_invld_count;
};
DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index 25906468622..f342ff0319d 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -12,6 +12,8 @@
#include <mach/anomaly.h>
#define MK_BMSK_(x) (1<<x)
+#define BFIN_DEPOSIT(mask, x) (((x) << __ffs(mask)) & (mask))
+#define BFIN_EXTRACT(mask, x) (((x) & (mask)) >> __ffs(mask))
#ifndef __ASSEMBLY__
@@ -23,62 +25,30 @@
# define NOP_PAD_ANOMALY_05000198
#endif
-#define bfin_read8(addr) ({ \
- uint32_t __v; \
+#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \
+ u32 __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
- "%0 = b[%1] (z);" \
+ "%0 = " #asm_size "[%1]" #asm_ext ";" \
: "=d" (__v) \
: "a" (addr) \
); \
__v; })
-
-#define bfin_read16(addr) ({ \
- uint32_t __v; \
- __asm__ __volatile__( \
- NOP_PAD_ANOMALY_05000198 \
- "%0 = w[%1] (z);" \
- : "=d" (__v) \
- : "a" (addr) \
- ); \
- __v; })
-
-#define bfin_read32(addr) ({ \
- uint32_t __v; \
- __asm__ __volatile__( \
- NOP_PAD_ANOMALY_05000198 \
- "%0 = [%1];" \
- : "=d" (__v) \
- : "a" (addr) \
- ); \
- __v; })
-
-#define bfin_write8(addr, val) \
+#define _bfin_writeX(addr, val, size, asm_size) \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
- "b[%0] = %1;" \
+ #asm_size "[%0] = %1;" \
: \
- : "a" (addr), "d" ((uint8_t)(val)) \
+ : "a" (addr), "d" ((u##size)(val)) \
: "memory" \
)
-#define bfin_write16(addr, val) \
- __asm__ __volatile__( \
- NOP_PAD_ANOMALY_05000198 \
- "w[%0] = %1;" \
- : \
- : "a" (addr), "d" ((uint16_t)(val)) \
- : "memory" \
- )
-
-#define bfin_write32(addr, val) \
- __asm__ __volatile__( \
- NOP_PAD_ANOMALY_05000198 \
- "[%0] = %1;" \
- : \
- : "a" (addr), "d" (val) \
- : "memory" \
- )
+#define bfin_read8(addr) _bfin_readX(addr, 8, b, (z))
+#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z))
+#define bfin_read32(addr) _bfin_readX(addr, 32, , )
+#define bfin_write8(addr, val) _bfin_writeX(addr, val, 8, b)
+#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
+#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, )
#endif /* __ASSEMBLY__ */
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
index c31f91cc1d5..171d8deb04a 100644
--- a/arch/blackfin/include/asm/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -30,10 +30,22 @@ __asm__ __volatile__ (
#define HZSCALE (268435456 / (1000000/HZ))
-static inline void udelay(unsigned long usecs)
+static inline unsigned long __to_delay(unsigned long scale)
{
extern unsigned long loops_per_jiffy;
- __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+ return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6;
+}
+
+static inline void udelay(unsigned long usecs)
+{
+ __delay(__to_delay(usecs));
}
+static inline void ndelay(unsigned long nsecs)
+{
+ __delay(__to_delay(1) * nsecs / 1000);
+}
+
+#define ndelay ndelay
+
#endif
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 413a30314a6..212cb80fd74 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -44,13 +44,8 @@ dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
extern void
__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
static inline void
-_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir)
{
- if (!__builtin_constant_p(dir)) {
- __dma_sync(addr, size, dir);
- return;
- }
-
switch (dir) {
case DMA_NONE:
BUG();
@@ -64,6 +59,14 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
break;
}
}
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+ if (__builtin_constant_p(dir))
+ __dma_sync_inline(addr, size, dir);
+ else
+ __dma_sync(addr, size, dir);
+}
static inline dma_addr_t
dma_map_single(struct device *dev, void *ptr, size_t size,
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index bd2e62243ab..2c09b1d50ec 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -262,6 +262,10 @@ static inline void dma_disable_irq(unsigned int channel)
{
disable_irq(dma_ch[channel].irq);
}
+static inline void dma_disable_irq_nosync(unsigned int channel)
+{
+ disable_irq_nosync(dma_ch[channel].irq);
+}
static inline void dma_enable_irq(unsigned int channel)
{
enable_irq(dma_ch[channel].irq);
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 1597ae5041e..efcc3aebeae 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -75,7 +75,7 @@
#define VLEV 0x00F0 /* Internal Voltage Level */
#ifdef __ADSPBF52x__
-#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
@@ -84,7 +84,7 @@
#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
#else
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 5b50f0ecacf..117713adea7 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -22,12 +22,15 @@
#define EF_BFIN_CODE_IN_L2 0x00000040 /* --code-in-l2 */
#define EF_BFIN_DATA_IN_L2 0x00000080 /* --data-in-l2 */
+#if 1 /* core dumps not supported, but linux/elfcore.h needs these */
typedef unsigned long elf_greg_t;
-#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct { } elf_fpregset_t;
+#endif
+
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
@@ -55,6 +58,9 @@ do { \
_regs->p2 = _dynamic_addr; \
} while(0)
+#if 0
+#define CORE_DUMP_USE_REGSET
+#endif
#define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC
#define ELF_EXEC_PAGESIZE 4096
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 90c9b400ba6..4cfe2d9ba7e 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -10,4 +10,57 @@
#define MCOUNT_INSN_SIZE 6 /* sizeof "[++sp] = rets; call __mcount;" */
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_FRAME_POINTER
+#include <linux/mm.h>
+
+extern inline void *return_address(unsigned int level)
+{
+ unsigned long *endstack, *fp, *ret_addr;
+ unsigned int current_level = 0;
+
+ if (level == 0)
+ return __builtin_return_address(0);
+
+ fp = (unsigned long *)__builtin_frame_address(0);
+ endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level);
+
+ while (((unsigned long)fp & 0x3) == 0 && fp &&
+ (fp + 1) < endstack && current_level < level) {
+ fp = (unsigned long *)*fp;
+ current_level++;
+ }
+
+ if (((unsigned long)fp & 0x3) == 0 && fp &&
+ (fp + 1) < endstack)
+ ret_addr = (unsigned long *)*(fp + 1);
+ else
+ ret_addr = NULL;
+
+ return ret_addr;
+}
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#define HAVE_ARCH_CALLER_ADDR
+
+/* inline function or macro may lead to unexpected result */
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* __ASSEMBLY__ */
+
#endif
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 539468a0505..91bd2d7b9d5 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -70,6 +70,8 @@
#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -223,6 +225,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
int bfin_gpio_get_value(unsigned gpio);
void bfin_gpio_set_value(unsigned gpio, int value);
+#include <asm/irq.h>
+#include <asm/errno.h>
+
#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> /* cansleep wrappers */
@@ -247,6 +252,11 @@ static inline int gpio_cansleep(unsigned int gpio)
return __gpio_cansleep(gpio);
}
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return __gpio_to_irq(gpio);
+}
+
#else /* !CONFIG_GPIOLIB */
static inline int gpio_request(unsigned gpio, const char *label)
@@ -279,10 +289,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
return bfin_gpio_set_value(gpio, value);
}
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-#endif /* !CONFIG_GPIOLIB */
-#include <asm/irq.h>
-
static inline int gpio_to_irq(unsigned gpio)
{
if (likely(gpio < MAX_BLACKFIN_GPIOS))
@@ -291,6 +297,9 @@ static inline int gpio_to_irq(unsigned gpio)
return -EINVAL;
}
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+#endif /* !CONFIG_GPIOLIB */
+
static inline int irq_to_gpio(unsigned irq)
{
return (irq - GPIO_IRQ_BASE);
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index e7c0623f909..12f4060a31b 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -12,6 +12,9 @@
#include <linux/irqflags.h>
+/* IRQs that may be used by external irq_chip controllers */
+#define NR_SPARE_IRQS 32
+
#include <mach/anomaly.h>
/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
@@ -35,4 +38,8 @@
#include <asm-generic/irq.h>
+#ifdef CONFIG_NMI_WATCHDOG
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
#endif /* _BFIN_IRQ_H_ */
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index ae8ef4ffd80..7f363d7e43a 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -13,6 +13,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/cplbinit.h>
+#include <asm/sections.h>
/* Note: L1 stacks are CPU-private things, so we bluntly disable this
feature in SMP mode, and use the per-CPU scratch SRAM bank only to
@@ -117,9 +118,16 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
unsigned long flags)
{
unsigned long *mask = mm->context.page_rwx_mask;
- unsigned long page = addr >> 12;
- unsigned long idx = page >> 5;
- unsigned long bit = 1 << (page & 31);
+ unsigned long page;
+ unsigned long idx;
+ unsigned long bit;
+
+ if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
+ page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12;
+ else
+ page = addr >> 12;
+ idx = page >> 5;
+ bit = 1 << (page & 31);
if (flags & VM_READ)
mask[idx] |= bit;
diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h
new file mode 100644
index 00000000000..b9caac4fcfd
--- /dev/null
+++ b/arch/blackfin/include/asm/nmi.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_NMI_H_
+#define _BFIN_NMI_H_
+
+#include <linux/nmi.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 1d04e407834..d0ce975bcd4 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -15,4 +15,7 @@
((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
#endif
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index b33a4488f49..aaa1c6c2bc1 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -24,6 +24,8 @@
#ifndef __ASSEMBLY__
+struct task_struct;
+
/* this struct defines the way the registers are stored on the
stack during a system call. */
@@ -101,9 +103,30 @@ struct pt_regs {
master interrupt enable. */
#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->usp)
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs(struct pt_regs *);
+#define arch_has_single_step() (1)
+extern void user_enable_single_step(struct task_struct *child);
+extern void user_disable_single_step(struct task_struct *child);
+/* common code demands this function */
+#define ptrace_disable(child) user_disable_single_step(child)
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+#define task_pt_regs(task) \
+ (struct pt_regs *) \
+ ((unsigned long)task_stack_page(task) + \
+ (THREAD_SIZE - sizeof(struct pt_regs)))
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
@@ -173,4 +196,6 @@ extern void show_regs(struct pt_regs *);
#define PT_FDPIC_EXEC 232
#define PT_FDPIC_INTERP 236
+#define PT_LAST_PSEUDO PT_FDPIC_INTERP
+
#endif /* _BFIN_PTRACE_H */
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 42f6c53c59c..14a3e66d916 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -21,6 +21,9 @@ extern unsigned long memory_start, memory_end, physical_mem_end;
extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
_data_l1_lma[], __weak _data_l1_len[];
+#ifdef CONFIG_ROMKERNEL
+extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[];
+#endif
extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
_data_b_l1_lma[], __weak _data_b_l1_len[];
extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index 6a0fe94b84a..f5b53796711 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -22,8 +22,23 @@ extern char coreb_trampoline_start, coreb_trampoline_end;
struct corelock_slot {
int lock;
};
+extern struct corelock_slot corelock;
+
+#ifdef __ARCH_SYNC_CORE_ICACHE
+extern unsigned long icache_invld_count[NR_CPUS];
+#endif
+#ifdef __ARCH_SYNC_CORE_DCACHE
+extern unsigned long dcache_invld_count[NR_CPUS];
+#endif
void smp_icache_flush_range_others(unsigned long start,
unsigned long end);
+#ifdef CONFIG_HOTPLUG_CPU
+void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void cpu_die(void);
+void platform_cpu_die(void);
+int __cpu_disable(void);
+int __cpu_die(unsigned int cpu);
+#endif
#endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/arch/blackfin/include/asm/syscall.h b/arch/blackfin/include/asm/syscall.h
new file mode 100644
index 00000000000..4921a4815cc
--- /dev/null
+++ b/arch/blackfin/include/asm/syscall.h
@@ -0,0 +1,96 @@
+/*
+ * Magic syscall break down functions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_SYSCALL_H__
+#define __ASM_BLACKFIN_SYSCALL_H__
+
+/*
+ * Blackfin syscalls are simple:
+ * enter:
+ * p0: syscall number
+ * r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5
+ * exit:
+ * r0: return/error value
+ */
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->p0;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+ regs->p0 = regs->orig_p0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+ return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+ int error, long val)
+{
+ regs->r0 = error ? -error : val;
+}
+
+/**
+ * syscall_get_arguments()
+ * @task: unused
+ * @regs: the register layout to extract syscall arguments from
+ * @i: first syscall argument to extract
+ * @n: number of syscall arguments to extract
+ * @args: array to return the syscall arguments in
+ *
+ * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+ unsigned int i, unsigned int n, unsigned long *args)
+{
+ /*
+ * Assume the ptrace layout doesn't change -- r5 is first in memory,
+ * then r4, ..., then r0. So we simply reverse the ptrace register
+ * array in memory to store into the args array.
+ */
+ long *aregs = &regs->r0 - i;
+
+ BUG_ON(i > 5 || i + n > 6);
+
+ while (n--)
+ *args++ = *aregs--;
+}
+
+/* See syscall_get_arguments() comments */
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+ unsigned int i, unsigned int n, const unsigned long *args)
+{
+ long *aregs = &regs->r0 - i;
+
+ BUG_ON(i > 5 || i + n > 6);
+
+ while (n--)
+ *aregs-- = *args++;
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index a40d9368c38..e9a5614cdbb 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -17,7 +17,7 @@
/* Thread Align Mask to reach to the top of the stack
* for any process
*/
-#define ALIGN_PAGE_MASK 0xffffe000
+#define ALIGN_PAGE_MASK 0xffffe000
/*
* Size of kernel stack for each process. This must be a power of 2...
@@ -57,7 +57,7 @@ struct thread_info {
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
@@ -73,8 +73,7 @@ __attribute_const__
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
- __asm__("%0 = sp;" : "=da"(ti) :
- );
+ __asm__("%0 = sp;" : "=da"(ti));
return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
}
@@ -99,21 +98,23 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
-#define TIF_MEMDIE 4
+#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_FREEZE 6 /* is freezing for suspend */
-#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
-#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
+#define TIF_FREEZE 6 /* is freezing for suspend */
+#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
+#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
+#define TIF_SINGLESTEP 9
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
-#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index 589e937ed1e..9ca7db844d1 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -23,9 +23,7 @@
*/
#ifndef CONFIG_CPU_FREQ
-#define TIME_SCALE 1
-#define __bfin_cycles_off (0)
-#define __bfin_cycles_mod (0)
+# define TIME_SCALE 1
#else
/*
* Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -33,9 +31,16 @@
* adjust the Core Timer Presale Register. This way we don't lose time.
*/
#define TIME_SCALE 4
+
+# ifdef CONFIG_CYCLES_CLOCKSOURCE
extern unsigned long long __bfin_cycles_off;
extern unsigned int __bfin_cycles_mod;
+# endif
+#endif
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+extern void bfin_coretmr_init(void);
+extern void bfin_coretmr_clockevent_init(void);
#endif
-extern void __init setup_core_timer(void);
#endif