diff options
Diffstat (limited to 'arch/blackfin/kernel/setup.c')
| -rw-r--r-- | arch/blackfin/kernel/setup.c | 85 |
1 files changed, 40 insertions, 45 deletions
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 298f023bcc0..6225edae488 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu) struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); cpudata->idle = current; - cpudata->loops_per_jiffy = loops_per_jiffy; cpudata->imemctl = bfin_read_IMEM_CONTROL(); cpudata->dmemctl = bfin_read_DMEM_CONTROL(); } @@ -408,13 +407,14 @@ static void __init print_memory_map(char *who) bfin_memmap.map[i].addr + bfin_memmap.map[i].size); switch (bfin_memmap.map[i].type) { case BFIN_MEMMAP_RAM: - printk("(usable)\n"); - break; + printk(KERN_CONT "(usable)\n"); + break; case BFIN_MEMMAP_RESERVED: - printk("(reserved)\n"); - break; - default: printk("type %lu\n", bfin_memmap.map[i].type); - break; + printk(KERN_CONT "(reserved)\n"); + break; + default: + printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type); + break; } } } @@ -567,17 +567,23 @@ static __init void memory_setup(void) # endif /* ANOMALY_05000263 */ # endif /* CONFIG_ROMFS_FS */ - memory_end -= mtd_size; - - if (mtd_size == 0) { - console_init(); - panic("Don't boot kernel without rootfs attached."); + /* Since the default MTD_UCLINUX has no magic number, we just blindly + * read 8 past the end of the kernel's image, and look at it. + * When no image is attached, mtd_size is set to a random number + * Do some basic sanity checks before operating on things + */ + if (mtd_size == 0 || memory_end <= mtd_size) { + pr_emerg("Could not find valid ram mtd attached.\n"); + } else { + memory_end -= mtd_size; + + /* Relocate MTD image to the top of memory after the uncached memory area */ + uclinux_ram_map.phys = memory_mtd_start = memory_end; + uclinux_ram_map.size = mtd_size; + pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n", + _end, mtd_size, (void *)memory_mtd_start); + dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); } - - /* Relocate MTD image to the top of memory after the uncached memory area */ - uclinux_ram_map.phys = memory_mtd_start = memory_end; - uclinux_ram_map.size = mtd_size; - dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) @@ -614,19 +620,19 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" - KERN_INFO " fixedcode = 0x%p-0x%p\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" + " fixedcode = 0x%p-0x%p\n" + " text = 0x%p-0x%p\n" + " rodata = 0x%p-0x%p\n" + " bss = 0x%p-0x%p\n" + " data = 0x%p-0x%p\n" + " stack = 0x%p-0x%p\n" + " init = 0x%p-0x%p\n" + " available = 0x%p-0x%p\n" #ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" + " rootfs = 0x%p-0x%p\n" #endif #if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" + " DMA Zone = 0x%p-0x%p\n" #endif , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, _stext, _etext, @@ -859,20 +865,13 @@ void __init setup_arch(char **cmdline_p) #endif printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1) - printk("Active "); + printk(KERN_CONT "Active "); else - printk("Off "); + printk(KERN_CONT "Off "); if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); + printk(KERN_CONT "and Enabled\n"); else - printk("and Disabled\n"); - -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif + printk(KERN_CONT "and Disabled\n"); printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); @@ -937,10 +936,6 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } - /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ - if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448"); - printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", @@ -1163,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" "Calibration\t: %lu loops\n", - (cpudata->loops_per_jiffy * HZ) / 500000, - ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, - (cpudata->loops_per_jiffy * HZ)); + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); /* Check Cache configutation */ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { |