summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/kernel/setup.c')
-rw-r--r--arch/blackfin/kernel/setup.c97
1 files changed, 63 insertions, 34 deletions
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 7a82d10b4eb..7f35d1046cd 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -42,6 +42,7 @@ EXPORT_SYMBOL(memory_start);
EXPORT_SYMBOL(memory_end);
EXPORT_SYMBOL(physical_mem_end);
EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
#ifdef CONFIG_MTD_UCLINUX
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
@@ -52,7 +53,8 @@ EXPORT_SYMBOL(mtd_size);
#endif
char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned int __initdata *__retx;
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+ *init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
/* boot memmap, for parsing "memmap=" */
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
@@ -77,10 +79,10 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
-void __init bf53x_cache_init(void)
+void __init bfin_cache_init(void)
{
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
- generate_cpl_tables();
+ generate_cplb_tables();
#endif
#ifdef CONFIG_BFIN_ICACHE
@@ -100,7 +102,7 @@ void __init bf53x_cache_init(void)
#endif
}
-void __init bf53x_relocate_l1_mem(void)
+void __init bfin_relocate_l1_mem(void)
{
unsigned long l1_code_length;
unsigned long l1_data_a_length;
@@ -410,7 +412,7 @@ static __init void parse_cmdline_early(char *cmdline_p)
* [_rambase, _ramstart]: kernel image
* [memory_start, memory_end]: dynamic memory managed by kernel
* [memory_end, _ramend]: reserved memory
- * [meory_mtd_start(memory_end),
+ * [memory_mtd_start(memory_end),
* memory_mtd_start + mtd_size]: rootfs (if any)
* [_ramend - DMA_UNCACHED_REGION,
* _ramend]: uncached DMA region
@@ -782,16 +784,25 @@ void __init setup_arch(char **cmdline_p)
_bfin_swrst = bfin_read_SWRST();
- /* If we double fault, reset the system - otherwise we hang forever */
- bfin_write_SWRST(DOUBLE_FAULT);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+ bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+ bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
- if (_bfin_swrst & RESET_DOUBLE)
- /*
- * don't decode the address, since you don't know if this
- * kernel's symbol map is the same as the crashing kernel
- */
- printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
- else if (_bfin_swrst & RESET_WDOG)
+ if (_bfin_swrst & RESET_DOUBLE) {
+ printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* We assume the crashing kernel, and the current symbol table match */
+ printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+ (int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+ printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+ printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+ printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+ init_retx);
+ } else if (_bfin_swrst & RESET_WDOG)
printk(KERN_INFO "Recovering from Watchdog event\n");
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
@@ -803,17 +814,24 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
- if (bfin_revid() != bfin_compiled_revid()) {
- if (bfin_compiled_revid() == -1)
- printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
- bfin_revid());
- else if (bfin_compiled_revid() != 0xffff)
- printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
- bfin_compiled_revid(), bfin_revid());
+
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+ else {
+ if (bfin_revid() != bfin_compiled_revid()) {
+ if (bfin_compiled_revid() == -1)
+ printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
+ bfin_revid());
+ else if (bfin_compiled_revid() != 0xffff)
+ printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+ bfin_compiled_revid(), bfin_revid());
+ }
+ if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+ printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+ CPU, bfin_revid());
}
- if (bfin_revid() < SUPPORTED_REVID)
- printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
- CPU, bfin_revid());
+
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -850,7 +868,7 @@ void __init setup_arch(char **cmdline_p)
!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
init_exception_vectors();
- bf53x_cache_init();
+ bfin_cache_init();
}
static int __init topology_init(void)
@@ -986,13 +1004,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
seq_printf(m, "processor\t: %d\n"
- "vendor_id\t: %s\n"
- "cpu family\t: 0x%x\n"
- "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+ "vendor_id\t: %s\n",
+ *(unsigned int *)v,
+ vendor);
+
+ if (CPUID == bfin_cpuid())
+ seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+ else
+ seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+ CPUID, bfin_cpuid());
+
+ seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
"stepping\t: %d\n",
- 0,
- vendor,
- (bfin_read_CHIPID() & CHIPID_FAMILY),
cpu, cclk/1000000, sclk/1000000,
#ifdef CONFIG_MPU
"mpu on",
@@ -1038,7 +1061,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
dcache_size = 0;
- if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+ if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
@@ -1127,12 +1150,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+ if (*pos == 0)
+ *pos = first_cpu(cpu_online_map);
+ if (*pos >= num_online_cpus())
+ return NULL;
+
+ return pos;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- ++*pos;
+ *pos = next_cpu(*pos, cpu_online_map);
+
return c_start(m, pos);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-13 16:47:26 +0000