summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/kernel/setup.c')
-rw-r--r--arch/blackfin/kernel/setup.c217
1 files changed, 150 insertions, 67 deletions
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index a58687bdee6..298f023bcc0 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -18,9 +18,12 @@
#include <linux/tty.h>
#include <linux/pfn.h>
+#ifdef CONFIG_MTD_UCLINUX
+#include <linux/mtd/map.h>
#include <linux/ext2_fs.h>
#include <linux/cramfs_fs.h>
#include <linux/romfs_fs.h>
+#endif
#include <asm/cplb.h>
#include <asm/cacheflush.h>
@@ -45,6 +48,7 @@ EXPORT_SYMBOL(_ramend);
EXPORT_SYMBOL(reserved_mem_dcache_on);
#ifdef CONFIG_MTD_UCLINUX
+extern struct map_info uclinux_ram_map;
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
unsigned long _ebss;
EXPORT_SYMBOL(memory_mtd_end);
@@ -113,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
*/
#ifdef CONFIG_BFIN_ICACHE
printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+ printk(KERN_INFO " External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
+# endif
+ " in instruction cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
+# endif
+ " in instruction cache\n");
+
+#else
+ printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
#endif
+
#ifdef CONFIG_BFIN_DCACHE
- printk(KERN_INFO "Data Cache Enabled for CPU%u"
-# if defined CONFIG_BFIN_WB
- " (write-back)"
-# elif defined CONFIG_BFIN_WT
- " (write-through)"
+ printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+ printk(KERN_INFO " External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
+# endif
+ " in data cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
# endif
- "\n", cpu);
+ " in data cache\n");
+#else
+ printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
#endif
}
@@ -150,40 +188,45 @@ void __init bfin_relocate_l1_mem(void)
unsigned long l1_data_b_length;
unsigned long l2_length;
+ /*
+ * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+ * we know that everything about l1 text/data is nice and aligned,
+ * so copy by 4 byte chunks, and don't worry about overlapping
+ * src/dest.
+ *
+ * We can't use the dma_memcpy functions, since they can call
+ * scheduler functions which might be in L1 :( and core writes
+ * into L1 instruction cause bad access errors, so we are stuck,
+ * we are required to use DMA, but can't use the common dma
+ * functions. We can't use memcpy either - since that might be
+ * going to be in the relocated L1
+ */
+
blackfin_dma_early_init();
+ /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
l1_code_length = _etext_l1 - _stext_l1;
- if (l1_code_length > L1_CODE_LENGTH)
- panic("L1 Instruction SRAM Overflow\n");
- /* cannot complain as printk is not available as yet.
- * But we can continue booting and complain later!
- */
-
- /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
- dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+ if (l1_code_length)
+ early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+ /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
l1_data_a_length = _sbss_l1 - _sdata_l1;
- if (l1_data_a_length > L1_DATA_A_LENGTH)
- panic("L1 Data SRAM Bank A Overflow\n");
-
- /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
- dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+ if (l1_data_a_length)
+ early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+ /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
- if (l1_data_b_length > L1_DATA_B_LENGTH)
- panic("L1 Data SRAM Bank B Overflow\n");
-
- /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
- dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+ if (l1_data_b_length)
+ early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
l1_data_a_length, l1_data_b_length);
+ early_dma_memcpy_done();
+
+ /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
if (L2_LENGTH != 0) {
l2_length = _sbss_l2 - _stext_l2;
- if (l2_length > L2_LENGTH)
- panic("L2 SRAM Overflow\n");
-
- /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
- dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+ if (l2_length)
+ memcpy(_stext_l2, _l2_lma_start, l2_length);
}
}
@@ -434,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p)
} else if (!memcmp(to, "clkin_hz=", 9)) {
to += 9;
early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
+#endif
} else if (!memcmp(to, "memmap=", 7)) {
to += 7;
parse_memmap(to);
@@ -472,7 +517,7 @@ static __init void memory_setup(void)
if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
console_init();
- panic("DMA region exceeds memory limit: %lu.\n",
+ panic("DMA region exceeds memory limit: %lu.",
_ramend - _ramstart);
}
memory_end = _ramend - DMA_UNCACHED_REGION;
@@ -507,7 +552,7 @@ static __init void memory_setup(void)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -526,17 +571,16 @@ static __init void memory_setup(void)
if (mtd_size == 0) {
console_init();
- panic("Don't boot kernel without rootfs attached.\n");
+ panic("Don't boot kernel without rootfs attached.");
}
/* Relocate MTD image to the top of memory after the uncached memory area */
- dma_memcpy((char *)memory_end, _end, mtd_size);
-
- memory_mtd_start = memory_end;
- _ebss = memory_mtd_start; /* define _ebss for compatible */
+ uclinux_ram_map.phys = memory_mtd_start = memory_end;
+ uclinux_ram_map.size = mtd_size;
+ dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -756,6 +800,11 @@ void __init setup_arch(char **cmdline_p)
{
unsigned long sclk, cclk;
+ /* Check to make sure we are running on the right processor */
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
@@ -770,14 +819,17 @@ void __init setup_arch(char **cmdline_p)
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = get_mem_size() * 1024 * 1024;
-
memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+ /* If the user does not specify things on the command line, use
+ * what the bootloader set things up as
+ */
+ physical_mem_end = 0;
parse_cmdline_early(&command_line[0]);
+ if (_ramend == 0)
+ _ramend = get_mem_size() * 1024 * 1024;
+
if (physical_mem_end == 0)
physical_mem_end = _ramend;
@@ -796,10 +848,8 @@ void __init setup_arch(char **cmdline_p)
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
- if (ANOMALY_05000273 && cclk == sclk)
- panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
+ if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
+ panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
#ifdef BF561_FAMILY
if (ANOMALY_05000266) {
@@ -831,7 +881,8 @@ void __init setup_arch(char **cmdline_p)
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
- _bfin_swrst = bfin_read_SYSCR();
+ /* Clear boot mode field */
+ _bfin_swrst = bfin_read_SYSCR() & ~0xf;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
@@ -869,10 +920,7 @@ void __init setup_arch(char **cmdline_p)
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
- if (unlikely(CPUID != bfin_cpuid()))
- printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
- CPU, bfin_cpuid(), bfin_revid());
- else {
+ if (likely(CPUID == bfin_cpuid())) {
if (bfin_revid() != bfin_compiled_revid()) {
if (bfin_compiled_revid() == -1)
printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
@@ -881,7 +929,7 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
bfin_compiled_revid(), bfin_revid());
if (bfin_compiled_revid() > bfin_revid())
- panic("Error: you are missing anomaly workarounds for this rev\n");
+ panic("Error: you are missing anomaly workarounds for this rev");
}
}
if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
@@ -891,16 +939,13 @@ void __init setup_arch(char **cmdline_p)
/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
- panic("You can't run on this processor due to 05000448\n");
+ panic("You can't run on this processor due to 05000448");
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
cclk / 1000000, sclk / 1000000);
- if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
- printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-
setup_bootmem_allocator();
paging_init();
@@ -1095,7 +1140,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
CPUID, bfin_cpuid());
seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
- "stepping\t: %d\n",
+ "stepping\t: %d ",
cpu, cclk/1000000, sclk/1000000,
#ifdef CONFIG_MPU
"mpu on",
@@ -1104,7 +1149,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#endif
revid);
- seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+ if (bfin_revid() != bfin_compiled_revid()) {
+ if (bfin_compiled_revid() == -1)
+ seq_printf(m, "(Compiled for Rev none)");
+ else if (bfin_compiled_revid() == 0xffff)
+ seq_printf(m, "(Compiled for Rev any)");
+ else
+ seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+ }
+
+ seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
cclk/1000000, cclk%1000000,
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
@@ -1145,16 +1199,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
- icache_size, dcache_size,
-#if defined CONFIG_BFIN_WB
- "-wb"
-#elif defined CONFIG_BFIN_WT
- "-wt"
-#endif
- "", 0);
-
+ "%d KB(L1 dcache) %d KB(L2 cache)\n",
+ icache_size, dcache_size, 0);
seq_printf(m, "%s\n", cache);
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
if (icache_size)
seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
@@ -1169,6 +1232,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#ifdef __ARCH_SYNC_CORE_DCACHE
seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
#endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+ seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+#endif
#ifdef CONFIG_BFIN_ICACHE_LOCK
switch ((cpudata->imemctl >> 3) & WAYALL_L) {
case WAY0_L:
@@ -1224,8 +1290,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if (cpu_num != num_possible_cpus() - 1)
return 0;
- if (L2_LENGTH)
+ if (L2_LENGTH) {
seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
+ }
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-11 23:17:03 +0000