summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c2
-rw-r--r--arch/blackfin/mach-bf533/boards/blackstamp.c25
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c10
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c2
-rw-r--r--arch/blackfin/mach-bf533/boards/ip0x.c11
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c30
-rw-r--r--arch/blackfin/mach-bf533/dma.c2
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial.h14
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h74
-rw-r--r--arch/blackfin/mach-bf533/include/mach/blackfin.h30
-rw-r--r--arch/blackfin/mach-bf533/include/mach/cdefBF532.h63
-rw-r--r--arch/blackfin/mach-bf533/include/mach/defBF532.h128
-rw-r--r--arch/blackfin/mach-bf533/include/mach/fio_flag.h55
-rw-r--r--arch/blackfin/mach-bf533/include/mach/gpio.h2
-rw-r--r--arch/blackfin/mach-bf533/include/mach/pll.h58
15 files changed, 118 insertions, 388 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 2ce7b16faee..d4bfcea5682 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -286,7 +286,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 20c102285be..87b5af3693c 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -25,7 +25,6 @@
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#include <mach/fio_flag.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -225,7 +224,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -290,9 +289,9 @@ static struct resource bfin_sport0_uart_resources[] = {
},
};
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};
static struct platform_device bfin_sport0_uart_device = {
@@ -324,9 +323,9 @@ static struct resource bfin_sport1_uart_resources[] = {
},
};
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
};
static struct platform_device bfin_sport1_uart_device = {
@@ -476,10 +475,16 @@ static int __init blackstamp_init(void)
return ret;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
- bfin_write_FIO_FLAG_S(PF0);
- SSYNC();
+ /*
+ * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+ * the bfin-async-map driver takes care of flipping between
+ * flash and ethernet when necessary.
+ */
+ ret = gpio_request(GPIO_PF0, "enet_cpld");
+ if (!ret) {
+ gpio_direction_output(GPIO_PF0, 1);
+ gpio_free(GPIO_PF0);
+ }
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index adbe62a81e2..4d5604eaa7c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -271,7 +271,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -336,9 +336,9 @@ static struct resource bfin_sport0_uart_resources[] = {
},
};
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};
static struct platform_device bfin_sport0_uart_device = {
@@ -370,9 +370,9 @@ static struct resource bfin_sport1_uart_resources[] = {
},
};
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
};
static struct platform_device bfin_sport1_uart_device = {
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index a1cb8e7c101..b67b91d8224 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -349,7 +349,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 5ba4b02a12e..f869a371148 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -22,7 +22,6 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
-#include <mach/fio_flag.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -174,7 +173,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -295,15 +294,7 @@ static int __init ip0x_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) {
- int j = 1 << bfin_spi_board_info[i].chip_select;
- /* set spi cs to 1 */
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j);
- bfin_write_FIO_FLAG_S(j);
- }
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
return 0;
}
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index b3b1cdea270..43224ef00b8 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -24,7 +24,6 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#include <mach/fio_flag.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -354,7 +353,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -419,9 +418,9 @@ static struct resource bfin_sport0_uart_resources[] = {
},
};
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};
static struct platform_device bfin_sport0_uart_device = {
@@ -453,9 +452,9 @@ static struct resource bfin_sport1_uart_resources[] = {
},
};
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
};
static struct platform_device bfin_sport1_uart_device = {
@@ -674,10 +673,16 @@ static int __init stamp_init(void)
return ret;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
- bfin_write_FIO_FLAG_S(PF0);
- SSYNC();
+ /*
+ * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+ * the bfin-async-map driver takes care of flipping between
+ * flash and ethernet when necessary.
+ */
+ ret = gpio_request(GPIO_PF0, "enet_cpld");
+ if (!ret) {
+ gpio_direction_output(GPIO_PF0, 1);
+ gpio_free(GPIO_PF0);
+ }
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -713,7 +718,6 @@ void __init native_machine_early_platform_add_devices(void)
void native_machine_restart(char *cmd)
{
/* workaround pull up on cpld / flash pin not being strong enough */
- bfin_write_FIO_INEN(~PF0);
- bfin_write_FIO_DIR(PF0);
- bfin_write_FIO_FLAG_C(PF0);
+ gpio_request(GPIO_PF0, "flash_cpld");
+ gpio_direction_output(GPIO_PF0, 0);
}
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 4a14a46a9a6..1f5988d4313 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -11,7 +11,7 @@
#include <asm/blackfin.h>
#include <asm/dma.h>
-struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = {
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
(struct dma_register *) DMA0_NEXT_DESC_PTR,
(struct dma_register *) DMA1_NEXT_DESC_PTR,
(struct dma_register *) DMA2_NEXT_DESC_PTR,
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
new file mode 100644
index 00000000000..08072c86d5d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS 1
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 9e1f3defb6b..45dcaa4f3e4 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -4,36 +4,9 @@
* Licensed under the GPL-2 or later
*/
-#include <linux/serial.h>
#include <asm/dma.h>
#include <asm/portmux.h>
-#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
-#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
-#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
-#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
-
-#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
-#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
-#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
-#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
-#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
-#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
-#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
-
-#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
-#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
-#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
-
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
@@ -44,51 +17,6 @@
# endif
#endif
-#define BFIN_UART_TX_FIFO_SIZE 2
-
-struct bfin_serial_port {
- struct uart_port port;
- unsigned int old_status;
- int status_irq;
- unsigned int lsr;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- int tx_done;
- int tx_count;
- struct circ_buf rx_dma_buf;
- struct timer_list rx_dma_timer;
- int rx_dma_nrows;
- unsigned int tx_dma_channel;
- unsigned int rx_dma_channel;
- struct work_struct tx_dma_workqueue;
-#else
-# if ANOMALY_05000363
- unsigned int anomaly_threshold;
-# endif
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct timer_list cts_timer;
- int cts_pin;
- int rts_pin;
-#endif
-};
-
-/* The hardware clears the LSR bits upon read, so we need to cache
- * some of the more fun bits in software so they don't get lost
- * when checking the LSR in other code paths (TX).
- */
-static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
-{
- unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
- uart->lsr |= (lsr & (BI|FE|PE|OE));
- return lsr | uart->lsr;
-}
-
-static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
-{
- uart->lsr = 0;
- bfin_write16(uart->port.membase + OFFSET_LSR, -1);
-}
-
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -120,3 +48,5 @@ struct bfin_serial_res bfin_serial_resource[] = {
};
#define DRIVER_NAME "bfin-uart"
+
+#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index f4bd6df5d96..e366207fbf1 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -1,7 +1,7 @@
/*
- * Copyright 2005-2009 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_BLACKFIN_H_
@@ -10,26 +10,14 @@
#define BF533_FAMILY
#include "bf533.h"
-#include "defBF532.h"
#include "anomaly.h"
-#if !defined(__ASSEMBLY__)
-#include "cdefBF532.h"
-#endif
-
-#define BFIN_UART_NR_PORTS 1
+#include <asm/def_LPBlackfin.h>
+#include "defBF532.h"
-#define OFFSET_THR 0x00 /* Transmit Holding register */
-#define OFFSET_RBR 0x00 /* Receive Buffer register */
-#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
-#define OFFSET_IER 0x04 /* Interrupt Enable Register */
-#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
-#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
-#define OFFSET_LCR 0x0C /* Line Control Register */
-#define OFFSET_MCR 0x10 /* Modem Control Register */
-#define OFFSET_LSR 0x14 /* Line Status Register */
-#define OFFSET_MSR 0x18 /* Modem Status Register */
-#define OFFSET_SCR 0x1C /* SCR Scratch Register */
-#define OFFSET_GCTL 0x24 /* Global Control Register */
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF532.h"
+#endif
-#endif /* _MACH_BLACKFIN_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index 401e524f532..fd0cbe4df21 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
@@ -7,9 +7,6 @@
#ifndef _CDEF_BF532_H
#define _CDEF_BF532_H
-/*include core specific register pointer definitions*/
-#include <asm/cdef_LPBlackfin.h>
-
/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
@@ -66,16 +63,10 @@
#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val)
/* DMA Traffic controls */
-#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER)
-#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val)
-#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT)
-#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val)
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER)
-#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val)
-#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT)
-#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val)
+#define bfin_read_DMAC_TC_PER() bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val) bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT() bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val) bfin_write16(DMAC_TC_CNT,val)
/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR)
@@ -105,6 +96,47 @@
#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T)
#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val)
+#if ANOMALY_05000311
+/* Keep at the CPP expansion to avoid circular header dependency loops */
+#define BFIN_WRITE_FIO_FLAG(name, val) \
+ do { \
+ unsigned long __flags; \
+ __flags = hard_local_irq_save(); \
+ bfin_write16(FIO_FLAG_##name, val); \
+ bfin_read_CHIPID(); \
+ hard_local_irq_restore(__flags); \
+ } while (0)
+#define bfin_write_FIO_FLAG_D(val) BFIN_WRITE_FIO_FLAG(D, val)
+#define bfin_write_FIO_FLAG_C(val) BFIN_WRITE_FIO_FLAG(C, val)
+#define bfin_write_FIO_FLAG_S(val) BFIN_WRITE_FIO_FLAG(S, val)
+#define bfin_write_FIO_FLAG_T(val) BFIN_WRITE_FIO_FLAG(T, val)
+
+#define BFIN_READ_FIO_FLAG(name) \
+ ({ \
+ unsigned long __flags; \
+ u16 __ret; \
+ __flags = hard_local_irq_save(); \
+ __ret = bfin_read16(FIO_FLAG_##name); \
+ bfin_read_CHIPID(); \
+ hard_local_irq_restore(__flags); \
+ __ret; \
+ })
+#define bfin_read_FIO_FLAG_D() BFIN_READ_FIO_FLAG(D)
+#define bfin_read_FIO_FLAG_C() BFIN_READ_FIO_FLAG(C)
+#define bfin_read_FIO_FLAG_S() BFIN_READ_FIO_FLAG(S)
+#define bfin_read_FIO_FLAG_T() BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
+#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
+#endif
+
/* DMA Controller */
#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
@@ -647,7 +679,4 @@
#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val)
-/* These need to be last due to the cdef/linux inter-dependencies */
-#include <asm/irq.h>
-
#endif /* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 3adb0b44e59..2376d539351 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -1,7 +1,7 @@
/*
* System & MMR bit and Address definitions for ADSP-BF532
*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
@@ -9,9 +9,6 @@
#ifndef _DEF_BF532_H
#define _DEF_BF532_H
-/* include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
/*********************************************************************************** */
/* System MMR Register Map */
/*********************************************************************************** */
@@ -182,12 +179,8 @@
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
/* DMA Traffic controls */
-#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
@@ -432,83 +425,6 @@
#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
-/* ***************************** UART CONTROLLER MASKS ********************** */
-
-/* UART_LCR Register */
-
-#define DLAB 0x80
-#define SB 0x40
-#define STP 0x20
-#define EPS 0x10
-#define PEN 0x08
-#define STB 0x04
-#define WLS(x) ((x-5) & 0x03)
-
-#define DLAB_P 0x07
-#define SB_P 0x06
-#define STP_P 0x05
-#define EPS_P 0x04
-#define PEN_P 0x03
-#define STB_P 0x02
-#define WLS_P1 0x01
-#define WLS_P0 0x00
-
-/* UART_MCR Register */
-#define LOOP_ENA 0x10
-#define LOOP_ENA_P 0x04
-
-/* UART_LSR Register */
-#define TEMT 0x40
-#define THRE 0x20
-#define BI 0x10
-#define FE 0x08
-#define PE 0x04
-#define OE 0x02
-#define DR 0x01
-
-#define TEMP_P 0x06
-#define THRE_P 0x05
-#define BI_P 0x04
-#define FE_P 0x03
-#define PE_P 0x02
-#define OE_P 0x01
-#define DR_P 0x00
-
-/* UART_IER Register */
-#define ELSI 0x04
-#define ETBEI 0x02
-#define ERBFI 0x01
-
-#define ELSI_P 0x02
-#define ETBEI_P 0x01
-#define ERBFI_P 0x00
-
-/* UART_IIR Register */
-#define STATUS(x) ((x << 1) & 0x06)
-#define NINT 0x01
-#define STATUS_P1 0x02
-#define STATUS_P0 0x01
-#define NINT_P 0x00
-#define IIR_TX_READY 0x02 /* UART_THR empty */
-#define IIR_RX_READY 0x04 /* Receive data ready */
-#define IIR_LINE_CHANGE 0x06 /* Receive line status */
-#define IIR_STATUS 0x06
-
-/* UART_GCTL Register */
-#define FFE 0x20
-#define FPE 0x10
-#define RPOLC 0x08
-#define TPOLC 0x04
-#define IREN 0x02
-#define UCEN 0x01
-
-#define FFE_P 0x05
-#define FPE_P 0x04
-#define RPOLC_P 0x03
-#define TPOLC_P 0x02
-#define IREN_P 0x01
-#define UCEN_P 0x00
-
/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */
/* PPI_CONTROL Masks */
@@ -643,44 +559,6 @@
#define ERR_TYP_P0 0x0E
#define ERR_TYP_P1 0x0F
-/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */
-
-/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
-#define PF0 0x0001
-#define PF1 0x0002
-#define PF2 0x0004
-#define PF3 0x0008
-#define PF4 0x0010
-#define PF5 0x0020
-#define PF6 0x0040
-#define PF7 0x0080
-#define PF8 0x0100
-#define PF9 0x0200
-#define PF10 0x0400
-#define PF11 0x0800
-#define PF12 0x1000
-#define PF13 0x2000
-#define PF14 0x4000
-#define PF15 0x8000
-
-/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */
-#define PF0_P 0
-#define PF1_P 1
-#define PF2_P 2
-#define PF3_P 3
-#define PF4_P 4
-#define PF5_P 5
-#define PF6_P 6
-#define PF7_P 7
-#define PF8_P 8
-#define PF9_P 9
-#define PF10_P 10
-#define PF11_P 11
-#define PF12_P 12
-#define PF13_P 13
-#define PF14_P 14
-#define PF15_P 15
-
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
/* AMGCTL Masks */
diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h
deleted file mode 100644
index d0bfba0b083..00000000000
--- a/arch/blackfin/mach-bf533/include/mach/fio_flag.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _MACH_FIO_FLAG_H
-#define _MACH_FIO_FLAG_H
-
-#include <asm/blackfin.h>
-#include <asm/irqflags.h>
-
-#if ANOMALY_05000311
-#define BFIN_WRITE_FIO_FLAG(name) \
-static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \
-{ \
- unsigned long flags; \
- flags = hard_local_irq_save(); \
- bfin_write16(FIO_FLAG_##name, val); \
- bfin_read_CHIPID(); \
- hard_local_irq_restore(flags); \
-}
-BFIN_WRITE_FIO_FLAG(D)
-BFIN_WRITE_FIO_FLAG(C)
-BFIN_WRITE_FIO_FLAG(S)
-BFIN_WRITE_FIO_FLAG(T)
-
-#define BFIN_READ_FIO_FLAG(name) \
-static inline u16 bfin_read_FIO_FLAG_##name(void) \
-{ \
- unsigned long flags; \
- u16 ret; \
- flags = hard_local_irq_save(); \
- ret = bfin_read16(FIO_FLAG_##name); \
- bfin_read_CHIPID(); \
- hard_local_irq_restore(flags); \
- return ret; \
-}
-BFIN_READ_FIO_FLAG(D)
-BFIN_READ_FIO_FLAG(C)
-BFIN_READ_FIO_FLAG(S)
-BFIN_READ_FIO_FLAG(T)
-
-#else
-#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val)
-#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val)
-#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val)
-#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val)
-#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
-#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
-#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
-#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
-#endif
-
-#endif /* _MACH_FIO_FLAG_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index e02416db4b0..cce4f8fb378 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -28,4 +28,6 @@
#define PORT_F GPIO_PF0
+#include <mach-common/ports-f.h>
+
#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h
index 169c106d0ed..94cca674d83 100644
--- a/arch/blackfin/mach-bf533/include/mach/pll.h
+++ b/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -1,57 +1 @@
-/*
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _MACH_PLL_H
-#define _MACH_PLL_H
-
-#include <asm/blackfin.h>
-#include <asm/irqflags.h>
-
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- if (val == bfin_read_PLL_CTL())
- return;
-
- flags = hard_local_irq_save();
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr = bfin_read32(SIC_IWR);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
- bfin_write16(PLL_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR, iwr);
- hard_local_irq_restore(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- if (val == bfin_read_VR_CTL())
- return;
-
- flags = hard_local_irq_save();
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr = bfin_read32(SIC_IWR);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
- bfin_write16(VR_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR, iwr);
- hard_local_irq_restore(flags);
-}
-
-#endif /* _MACH_PLL_H */
+#include <mach-common/pll.h>