summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf537
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf537')
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537e.c116
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537u.c187
-rw-r--r--arch/blackfin/mach-bf537/boards/minotaur.c183
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c169
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c684
-rw-r--r--arch/blackfin/mach-bf537/boards/tcm_bf537.c187
-rw-r--r--arch/blackfin/mach-bf537/include/mach/irq.h12
7 files changed, 1388 insertions, 150 deletions
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index c85f4d77053..d35fc5fe4c2 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
@@ -112,7 +112,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = {
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
@@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = {
#endif
};
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
@@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = {
#endif
};
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
+};
+
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
#endif
@@ -512,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+ .resource = bfin_sport0_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+ {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT1_RX,
+ .end = IRQ_SPORT1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+ .resource = bfin_sport1_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
@@ -633,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
+#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
@@ -683,6 +760,33 @@ static int __init cm_bf537e_init(void)
arch_initcall(cm_bf537e_init);
+static struct platform_device *cm_bf537e_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+ &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+ &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(cm_bf537e_early_devices,
+ ARRAY_SIZE(cm_bf537e_early_devices));
+}
+
void bfin_get_ether_addr(char *addr)
{
random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index ea11aa81340..d464ad5b72b 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+ {
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART1_ERROR,
+ .end = IRQ_UART1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_TX,
+ .end = CH_UART1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
};
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+ .resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
@@ -423,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+ .resource = bfin_sport0_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+ {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT1_RX,
+ .end = IRQ_SPORT1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+ .resource = bfin_sport1_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
@@ -522,7 +649,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -539,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
+#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
@@ -589,6 +725,33 @@ static int __init cm_bf537u_init(void)
arch_initcall(cm_bf537u_init);
+static struct platform_device *cm_bf537u_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+ &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+ &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(cm_bf537u_early_devices,
+ ARRAY_SIZE(cm_bf537u_early_devices));
+}
+
void bfin_get_ether_addr(char *addr)
{
random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 0da92725270..c489d602c59 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -211,25 +211,93 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+ {
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART1_ERROR,
+ .end = IRQ_UART1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_TX,
+ .end = CH_UART1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
};
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+ .resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
@@ -309,16 +377,75 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+ .resource = bfin_sport0_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+ {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT1_RX,
+ .end = IRQ_SPORT1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+ .resource = bfin_sport1_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
static struct platform_device *minotaur_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -343,7 +470,12 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -360,9 +492,13 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
+#endif
};
@@ -380,6 +516,33 @@ static int __init minotaur_init(void)
arch_initcall(minotaur_init);
+static struct platform_device *minotaur_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+ &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+ &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(minotaur_early_devices,
+ ARRAY_SIZE(minotaur_early_devices));
+}
+
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e0afda472a..812e8f99160 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -17,7 +17,6 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
-#include <linux/usb/sl811.h>
#include <linux/spi/ad7877.h>
@@ -99,51 +98,6 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
- {
- .start = 0x20340000,
- .end = 0x20340000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20340004,
- .end = 0x20340004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_SL811_BFIN_IRQ,
- .end = CONFIG_USB_SL811_BFIN_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
- gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
- gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
- .potpg = 10,
- .power = 250, /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
- .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
- .name = "sl811-hcd",
- .id = 0,
- .dev = {
- .platform_data = &sl811_priv,
- },
- .num_resources = ARRAY_SIZE(sl811_hcd_resources),
- .resource = sl811_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -221,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+ || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
@@ -284,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+ || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -362,25 +316,93 @@ static struct platform_device bfin_fb_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+ {
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART1_ERROR,
+ .end = IRQ_UART1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_TX,
+ .end = CH_UART1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
};
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+ .resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
@@ -446,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&rtc_device,
#endif
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
- &sl811_hcd_device,
-#endif
-
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
@@ -472,7 +490,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -498,6 +521,24 @@ static int __init pnav_init(void)
arch_initcall(pnav_init);
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(stamp_early_devices,
+ ARRAY_SIZE(stamp_early_devices));
+}
+
void bfin_get_ether_addr(char *addr)
{
random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ac9b52e0087..9eaf5b05c11 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -20,10 +20,12 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
+#include <linux/i2c.h>
+#include <linux/i2c/adp5588.h>
+#include <linux/etherdevice.h>
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/i2c.h>
#include <linux/usb/sl811.h>
#include <linux/spi/mmc_spi.h>
#include <linux/leds.h>
@@ -33,6 +35,14 @@
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
+#ifdef CONFIG_REGULATOR_ADP_SWITCH
+#include <linux/regulator/adp_switch.h>
+#endif
+#ifdef CONFIG_REGULATOR_AD5398
+#include <linux/regulator/ad5398.h>
+#endif
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -208,8 +218,8 @@ static struct resource sl811_hcd_resources[] = {
.end = 0x20340004,
.flags = IORESOURCE_MEM,
}, {
- .start = CONFIG_USB_SL811_BFIN_IRQ,
- .end = CONFIG_USB_SL811_BFIN_IRQ,
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
@@ -454,6 +464,9 @@ static struct physmap_flash_data stamp_flash_data = {
.width = 2,
.parts = stamp_partitions,
.nr_parts = ARRAY_SIZE(stamp_partitions),
+#ifdef CONFIG_ROMKERNEL
+ .probe_type = "map_rom",
+#endif
};
static struct resource stamp_flash_resource = {
@@ -515,20 +528,19 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \
+ || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
- .cs_gpio = GPIO_PF5,
};
#endif
@@ -644,6 +656,42 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = {
};
#endif
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+unsigned short ad2s120x_platform_data[] = {
+ /* used as SAMPLE and RDVEL */
+ GPIO_PF5, GPIO_PF6, 0
+};
+
+static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+unsigned short ad2s1210_platform_data[] = {
+ /* use as SAMPLE, A0, A1 */
+ GPIO_PF7, GPIO_PF8, GPIO_PF9,
+# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
+ /* the RES0 and RES1 pins */
+ GPIO_PF4, GPIO_PF5,
+# endif
+ 0,
+};
+
+static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
@@ -686,11 +734,11 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.y_plate_ohms = 486,
.pressure_max = 1000,
.pressure_min = 0,
- .stopacq_polarity = 1,
- .first_conversion_delay = 3,
- .acquisition_time = 1,
- .averaging = 1,
- .pen_down_acc_interval = 1,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
};
#endif
@@ -701,13 +749,13 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
.pressure_max = 10000,
.pressure_min = 0,
- .first_conversion_delay = 3, /* wait 512us before do a first conversion */
- .acquisition_time = 1, /* 4us acquisition time per sample */
+ .first_conversion_delay = 3, /* wait 512us before do a first conversion */
+ .acquisition_time = 1, /* 4us acquisition time per sample */
.median = 2, /* do 8 measurements */
- .averaging = 1, /* take the average of 4 middle samples */
- .pen_down_acc_interval = 255, /* 9.4 ms */
- .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */
- .gpio_default = 1, /* During initialization set GPIO = HIGH */
+ .averaging = 1, /* take the average of 4 middle samples */
+ .pen_down_acc_interval = 255, /* 9.4 ms */
+ .gpio_export = 1, /* Export GPIO to gpiolib */
+ .gpio_base = -1, /* Dynamic allocation */
};
#endif
@@ -742,6 +790,11 @@ static const struct adxl34x_platform_data adxl34x_info = {
/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
.fifo_mode = ADXL_FIFO_STREAM,
+ .orientation_enable = ADXL_EN_ORIENTATION_3D,
+ .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+ .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
+ /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+ .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
};
#endif
@@ -813,6 +866,35 @@ static struct adf702x_platform_data adf7021_platform_data = {
.adf702x_regs = adf7021_regs,
.tx_reg = TXREG,
};
+static inline void adf702x_mac_init(void)
+{
+ random_ether_addr(adf7021_platform_data.mac_addr);
+}
+#else
+static inline void adf702x_mac_init(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/ads7846.h>
+static struct bfin5xx_spi_chip ad7873_spi_chip_info = {
+ .bits_per_word = 8,
+};
+
+static int ads7873_get_pendown_state(void)
+{
+ return gpio_get_value(GPIO_PF6);
+}
+
+static struct ads7846_platform_data __initdata ad7873_pdata = {
+ .model = 7873, /* AD7873 */
+ .x_max = 0xfff,
+ .y_max = 0xfff,
+ .x_plate_ohms = 620,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7873_get_pendown_state,
+};
#endif
#if defined(CONFIG_MTD_DATAFLASH) \
@@ -893,24 +975,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+ || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
{
- .modalias = "ad1836",
+ .modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+ .platform_data = "ad1836", /* only includes chip name for the moment */
.controller_data = &ad1836_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
{
- .modalias = "ad1938",
+ .modalias = "ad193x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+ .chip_select = 5,
.controller_data = &ad1938_spi_chip_info,
.mode = SPI_MODE_3,
},
@@ -929,6 +1012,37 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+ {
+ .modalias = "ad2s90",
+ .bus_num = 0,
+ .chip_select = 3, /* change it for your board */
+ .platform_data = NULL,
+ .controller_data = &ad2s90_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+ {
+ .modalias = "ad2s120x",
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = ad2s120x_platform_data,
+ .controller_data = &ad2s120x_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+ {
+ .modalias = "ad2s1210",
+ .max_speed_hz = 8192000,
+ .bus_num = 0,
+ .chip_select = 4, /* CS, change it for your board */
+ .platform_data = ad2s1210_platform_data,
+ .controller_data = &ad2s1210_spi_chip_info,
+ },
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "mmc_spi",
@@ -1016,7 +1130,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
-
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .irq = IRQ_PF6,
+ .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
+ .controller_data = &ad7873_spi_chip_info,
+ .platform_data = &ad7873_pdata,
+ .mode = SPI_MODE_0,
+ },
+#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -1132,9 +1257,10 @@ static struct platform_device bfin_fb_device = {
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
- .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
- .use_bl = 0, /* let something else control the LCD Blacklight */
- .gpio_bl = GPIO_PF7,
+ .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+ .ppi_mode = USE_RGB565_16_BIT_PPI,
+ .use_bl = 0, /* let something else control the LCD Blacklight */
+ .gpio_bl = GPIO_PF7,
};
static struct resource bfin_lq035q1_resources[] = {
@@ -1148,8 +1274,8 @@ static struct resource bfin_lq035q1_resources[] = {
static struct platform_device bfin_lq035q1_device = {
.name = "bfin-lq035q1",
.id = -1,
- .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
- .resource = bfin_lq035q1_resources,
+ .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
+ .resource = bfin_lq035q1_resources,
.dev = {
.platform_data = &bfin_lq035q1_data,
},
@@ -1157,30 +1283,105 @@ static struct platform_device bfin_lq035q1_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ { /* CTS pin */
+ .start = GPIO_PG7,
+ .end = GPIO_PG7,
+ .flags = IORESOURCE_IO,
+ },
+ { /* RTS pin */
+ .start = GPIO_PG6,
+ .end = GPIO_PG6,
+ .flags = IORESOURCE_IO,
+ },
+#endif
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
{
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
-#endif
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART1_ERROR,
+ .end = IRQ_UART1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_TX,
+ .end = CH_UART1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
};
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+ .resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
@@ -1260,7 +1461,6 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
[0] = KEY_GRAVE,
[1] = KEY_1,
@@ -1457,7 +1657,6 @@ static struct adp5520_platform_data adp5520_pdev_data = {
#endif
#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
static struct adp5588_gpio_platform_data adp5588_gpio_data = {
.gpio_start = 50,
.pullup_dis_mask = 0,
@@ -1516,6 +1715,101 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
};
#endif
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#include <linux/i2c/adp8860.h>
+static struct led_info adp8860_leds[] = {
+ {
+ .name = "adp8860-led7",
+ .default_trigger = "none",
+ .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
+ },
+};
+
+static struct adp8860_backlight_platform_data adp8860_pdata = {
+ .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
+ ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
+
+ .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */
+ .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */
+ .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
+
+ .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
+ .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */
+
+ .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ .leds = adp8860_leds,
+ .num_leds = ARRAY_SIZE(adp8860_leds),
+ .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
+ .led_fade_in = ADP8860_FADE_T_600ms,
+ .led_fade_out = ADP8860_FADE_T_600ms,
+ .led_on_time = ADP8860_LED_ONT_200ms,
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+static struct regulator_consumer_supply ad5398_consumer = {
+ .supply = "current",
+};
+
+static struct regulator_init_data ad5398_regulator_data = {
+ .constraints = {
+ .name = "current range",
+ .max_uA = 120000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ad5398_consumer,
+};
+
+static struct ad5398_platform_data ad5398_i2c_platform_data = {
+ .current_bits = 10,
+ .current_offset = 4,
+ .regulator_data = &ad5398_regulator_data,
+};
+
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+ defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+static struct platform_device ad5398_virt_consumer_device = {
+ .name = "reg-virt-consumer",
+ .id = 0,
+ .dev = {
+ .platform_data = "current", /* Passed to driver */
+ },
+};
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+ defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data ad5398_bulk_data = {
+ .supply = "current",
+};
+
+static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
+ .name = "ad5398",
+ .num_supplies = 1,
+ .supplies = &ad5398_bulk_data,
+};
+
+static struct platform_device ad5398_userspace_consumer_device = {
+ .name = "reg-userspace-consumer",
+ .id = 0,
+ .dev = {
+ .platform_data = &ad5398_userspace_comsumer_data,
+ },
+};
+#endif
+#endif
+
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
{
@@ -1524,6 +1818,52 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.platform_data = (void *)&ad7142_i2c_platform_data,
},
#endif
+
+#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
+ {
+ I2C_BOARD_INFO("ad7150", 0x48),
+ .irq = IRQ_PG5, /* fixme: use real interrupt number */
+ },
+#endif
+
+#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
+ {
+ I2C_BOARD_INFO("ad7152", 0x48),
+ },
+#endif
+
+#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
+ {
+ I2C_BOARD_INFO("ad774x", 0x48),
+ },
+#endif
+
+#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE)
+ {
+ I2C_BOARD_INFO("ad7414", 0x9),
+ .irq = IRQ_PG5,
+ /*
+ * platform_data pointer is borrwoed by the driver to
+ * store custimer defined IRQ ALART level mode.
+ * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+ */
+ .platform_data = (void *)IRQF_TRIGGER_LOW,
+ },
+#endif
+
+#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE)
+ {
+ I2C_BOARD_INFO("ad7417", 0xb),
+ .irq = IRQ_PG5,
+ /*
+ * platform_data pointer is borrwoed by the driver to
+ * store custimer defined IRQ ALART level mode.
+ * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+ */
+ .platform_data = (void *)IRQF_TRIGGER_LOW,
+ },
+#endif
+
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
@@ -1595,24 +1935,105 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
I2C_BOARD_INFO("adau1761", 0x38),
},
#endif
+#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
+ {
+ I2C_BOARD_INFO("adau1361", 0x38),
+ },
+#endif
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
{
I2C_BOARD_INFO("ad5258", 0x18),
},
#endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+ {
+ I2C_BOARD_INFO("ssm2602", 0x1b),
+ },
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+ {
+ I2C_BOARD_INFO("ad5398", 0xC),
+ .platform_data = (void *)&ad5398_i2c_platform_data,
+ },
+#endif
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+ {
+ I2C_BOARD_INFO("adp8860", 0x2A),
+ .platform_data = (void *)&adp8860_pdata,
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+ .resource = bfin_sport0_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+ {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT1_RX,
+ .end = IRQ_SPORT1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+ .resource = bfin_sport1_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
@@ -1701,13 +2122,121 @@ static struct platform_device bfin_dpmc = {
},
};
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+ .name = "bfin-i2s",
+ .id = CONFIG_SND_BF5XX_SPORT_NUM,
+ /* TODO: add platform data here */
+};
+#endif
+
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
static struct platform_device bfin_tdm = {
.name = "bfin-tdm",
+ .id = CONFIG_SND_BF5XX_SPORT_NUM,
/* TODO: add platform data here */
};
#endif
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+ .name = "bfin-ac97",
+ .id = CONFIG_SND_BF5XX_SPORT_NUM,
+ /* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+#define REGULATOR_ADP122 "adp122"
+#define REGULATOR_ADP150 "adp150"
+
+static struct regulator_consumer_supply adp122_consumers = {
+ .supply = REGULATOR_ADP122,
+};
+
+static struct regulator_consumer_supply adp150_consumers = {
+ .supply = REGULATOR_ADP150,
+};
+
+static struct regulator_init_data adp_switch_regulator_data[] = {
+ {
+ .constraints = {
+ .name = REGULATOR_ADP122,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .min_uA = 0,
+ .max_uA = 300000,
+ },
+ .num_consumer_supplies = 1, /* only 1 */
+ .consumer_supplies = &adp122_consumers,
+ .driver_data = (void *)GPIO_PF2, /* gpio port only */
+ },
+ {
+ .constraints = {
+ .name = REGULATOR_ADP150,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .min_uA = 0,
+ .max_uA = 150000,
+ },
+ .num_consumer_supplies = 1, /* only 1 */
+ .consumer_supplies = &adp150_consumers,
+ .driver_data = (void *)GPIO_PF3, /* gpio port only */
+ },
+};
+
+static struct adp_switch_platform_data adp_switch_pdata = {
+ .regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
+ .regulator_data = adp_switch_regulator_data,
+};
+
+static struct platform_device adp_switch_device = {
+ .name = "adp_switch",
+ .id = 0,
+ .dev = {
+ .platform_data = &adp_switch_pdata,
+ },
+};
+
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+ defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data adp122_bulk_data = {
+ .supply = REGULATOR_ADP122,
+};
+
+static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
+ .name = REGULATOR_ADP122,
+ .num_supplies = 1,
+ .supplies = &adp122_bulk_data,
+};
+
+static struct platform_device adp122_userspace_consumer_device = {
+ .name = "reg-userspace-consumer",
+ .id = 0,
+ .dev = {
+ .platform_data = &adp122_userspace_comsumer_data,
+ },
+};
+
+static struct regulator_bulk_data adp150_bulk_data = {
+ .supply = REGULATOR_ADP150,
+};
+
+static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
+ .name = REGULATOR_ADP150,
+ .num_supplies = 1,
+ .supplies = &adp150_bulk_data,
+};
+
+static struct platform_device adp150_userspace_consumer_device = {
+ .name = "reg-userspace-consumer",
+ .id = 1,
+ .dev = {
+ .platform_data = &adp150_userspace_comsumer_data,
+ },
+};
+#endif
+#endif
+
+
static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
@@ -1771,7 +2300,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -1788,9 +2322,13 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
+#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
&bfin_pata_device,
@@ -1808,18 +2346,46 @@ static struct platform_device *stamp_devices[] __initdata = {
&stamp_flash_device,
#endif
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+ &bfin_i2s,
+#endif
+
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
&bfin_tdm,
#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+ &bfin_ac97,
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+ defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+ &ad5398_virt_consumer_device,
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+ defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+ &ad5398_userspace_consumer_device,
+#endif
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+ &adp_switch_device,
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+ defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+ &adp122_userspace_consumer_device,
+ &adp150_userspace_consumer_device,
+#endif
+#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
- i2c_register_board_info(0, bfin_i2c_board_info,
- ARRAY_SIZE(bfin_i2c_board_info));
bfin_plat_nand_init();
+ adf702x_mac_init();
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
@@ -1827,6 +2393,34 @@ static int __init stamp_init(void)
arch_initcall(stamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+ &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+ &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(stamp_early_devices,
+ ARRAY_SIZE(stamp_early_devices));
+}
+
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 57163b65a4f..4f0a2e72ce4 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
{
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
+ .start = UART0_THR,
+ .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+ {
+ .start = UART1_THR,
+ .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART1_ERROR,
+ .end = IRQ_UART1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_TX,
+ .end = CH_UART1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+ P_UART1_TX, P_UART1_RX, 0
};
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+ .resource = bfin_uart1_resources,
+ .dev = {
+ .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
@@ -425,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+ .resource = bfin_sport0_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+ {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT1_RX,
+ .end = IRQ_SPORT1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+ .resource = bfin_sport1_uart_resources,
+ .dev = {
+ .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+ },
};
#endif
+#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
@@ -524,7 +651,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -541,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
+#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
@@ -591,6 +727,33 @@ static int __init tcm_bf537_init(void)
arch_initcall(tcm_bf537_init);
+static struct platform_device *cm_bf537_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+ &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+ &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(cm_bf537_early_devices,
+ ARRAY_SIZE(cm_bf537_early_devices));
+}
+
void bfin_get_ether_addr(char *addr)
{
random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 0defa9457e7..789a4f226f7 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -134,7 +134,17 @@
#define GPIO_IRQ_BASE IRQ_PF0
-#define NR_IRQS (IRQ_PH15+1)
+#define IRQ_MAC_PHYINT 98 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT 99 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT 100 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT 101 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET 102 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR 103 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR 104 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE 105 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1)
+#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS)
#define IVG7 7
#define IVG8 8
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 02:51:50 +0000