diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf548/boards/ezkit.c | 31 |
1 files changed, 20 insertions, 11 deletions
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 56682a36e42..216e26999af 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -837,8 +837,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "linux kernel(nand)", + .name = "bootloader(nand)", .offset = 0, + .size = 0x80000, + }, { + .name = "linux kernel(nand)", + .offset = MTDPART_OFS_APPEND, .size = 4 * 1024 * 1024, }, { @@ -901,7 +905,7 @@ static struct platform_device bf54x_sdh_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", - .size = 0x40000, + .size = 0x80000, .offset = 0, }, { .name = "linux kernel(nor)", @@ -943,7 +947,7 @@ static struct platform_device ezkit_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", - .size = 0x00040000, + .size = 0x00080000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { @@ -966,8 +970,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -1023,13 +1027,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, .controller_data = &ad1836_spi_chip_info, }, #endif @@ -1107,7 +1111,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1123,7 +1127,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1206,6 +1210,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { .platform_data = (void *)&adxl34x_info, }, #endif +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("ad5252", 0x2f), + }, +#endif }; #endif |