summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf548/include/mach/defBF54x_base.h')
-rw-r--r--arch/blackfin/mach-bf548/include/mach/defBF54x_base.h152
1 files changed, 7 insertions, 145 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 0ed06c2366f..95ff44601fd 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -105,15 +105,15 @@
#define TWI0_REGBASE 0xffc00700
#define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */
#define TWI0_CONTROL 0xffc00704 /* TWI Control Register */
-#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */
+#define TWI0_SLAVE_CTL 0xffc00708 /* TWI Slave Mode Control Register */
#define TWI0_SLAVE_STAT 0xffc0070c /* TWI Slave Mode Status Register */
#define TWI0_SLAVE_ADDR 0xffc00710 /* TWI Slave Mode Address Register */
-#define TWI0_MASTER_CTRL 0xffc00714 /* TWI Master Mode Control Register */
+#define TWI0_MASTER_CTL 0xffc00714 /* TWI Master Mode Control Register */
#define TWI0_MASTER_STAT 0xffc00718 /* TWI Master Mode Status Register */
#define TWI0_MASTER_ADDR 0xffc0071c /* TWI Master Mode Address Register */
#define TWI0_INT_STAT 0xffc00720 /* TWI Interrupt Status Register */
#define TWI0_INT_MASK 0xffc00724 /* TWI Interrupt Mask Register */
-#define TWI0_FIFO_CTRL 0xffc00728 /* TWI FIFO Control Register */
+#define TWI0_FIFO_CTL 0xffc00728 /* TWI FIFO Control Register */
#define TWI0_FIFO_STAT 0xffc0072c /* TWI FIFO Status Register */
#define TWI0_XMT_DATA8 0xffc00780 /* TWI FIFO Transmit Data Single Byte Register */
#define TWI0_XMT_DATA16 0xffc00784 /* TWI FIFO Transmit Data Double Byte Register */
@@ -198,8 +198,8 @@
/* DMAC0 Registers */
-#define DMAC0_TCPER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */
-#define DMAC0_TCCNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */
+#define DMAC0_TC_PER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */
+#define DMAC0_TC_CNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */
/* DMA Channel 0 Registers */
@@ -688,8 +688,8 @@
/* DMAC1 Registers */
-#define DMAC1_TCPER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */
-#define DMAC1_TCCNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */
+#define DMAC1_TC_PER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */
+#define DMAC1_TC_CNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */
/* DMA Channel 12 Registers */
@@ -1958,57 +1958,6 @@
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
-/* Bit masks for CNT_CONFIG */
-
-#define CNTE 0x1 /* Counter Enable */
-#define DEBE 0x2 /* Debounce Enable */
-#define CDGINV 0x10 /* CDG Pin Polarity Invert */
-#define CUDINV 0x20 /* CUD Pin Polarity Invert */
-#define CZMINV 0x40 /* CZM Pin Polarity Invert */
-#define CNTMODE 0x700 /* Counter Operating Mode */
-#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
-#define BNDMODE 0x3000 /* Boundary register Mode */
-#define INPDIS 0x8000 /* CUG and CDG Input Disable */
-
-/* Bit masks for CNT_IMASK */
-
-#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
-#define UCIE 0x2 /* Up count Interrupt Enable */
-#define DCIE 0x4 /* Down count Interrupt Enable */
-#define MINCIE 0x8 /* Min Count Interrupt Enable */
-#define MAXCIE 0x10 /* Max Count Interrupt Enable */
-#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
-#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
-#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
-#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
-#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
-#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
-
-/* Bit masks for CNT_STATUS */
-
-#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
-#define UCII 0x2 /* Up count Interrupt Identifier */
-#define DCII 0x4 /* Down count Interrupt Identifier */
-#define MINCII 0x8 /* Min Count Interrupt Identifier */
-#define MAXCII 0x10 /* Max Count Interrupt Identifier */
-#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
-#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
-#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
-#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
-#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
-#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
-
-/* Bit masks for CNT_COMMAND */
-
-#define W1LCNT 0xf /* Load Counter Register */
-#define W1LMIN 0xf0 /* Load Min Register */
-#define W1LMAX 0xf00 /* Load Max Register */
-#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define DPRESCALE 0xf /* Load Counter Register */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
@@ -2044,66 +1993,6 @@
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
-/* Bit masks for NFC_CTL */
-
-#define WR_DLY 0xf /* Write Strobe Delay */
-#define RD_DLY 0xf0 /* Read Strobe Delay */
-#define NWIDTH 0x100 /* NAND Data Width */
-#define PG_SIZE 0x200 /* Page Size */
-
-/* Bit masks for NFC_STAT */
-
-#define NBUSY 0x1 /* Not Busy */
-#define WB_FULL 0x2 /* Write Buffer Full */
-#define PG_WR_STAT 0x4 /* Page Write Pending */
-#define PG_RD_STAT 0x8 /* Page Read Pending */
-#define WB_EMPTY 0x10 /* Write Buffer Empty */
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define NBUSYIRQ 0x1 /* Not Busy IRQ */
-#define WB_OVF 0x2 /* Write Buffer Overflow */
-#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
-#define RD_RDY 0x8 /* Read Data Ready */
-#define WR_DONE 0x10 /* Page Write Done */
-
-/* Bit masks for NFC_IRQMASK */
-
-#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
-#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
-#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */
-#define MASK_RDRDY 0x8 /* Mask Read Data Ready */
-#define MASK_WRDONE 0x10 /* Mask Write Done */
-
-/* Bit masks for NFC_RST */
-
-#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
-
-/* Bit masks for NFC_PGCTL */
-
-#define PG_RD_START 0x1 /* Page Read Start */
-#define PG_WR_START 0x2 /* Page Write Start */
-
-/* Bit masks for NFC_ECC0 */
-
-#define ECC0 0x7ff /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define ECC1 0x7ff /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define ECC2 0x7ff /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define ECC3 0x7ff /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define ECCCNT 0x3ff /* Transfer Count */
-
/* Bit masks for EPPIx_STATUS */
#define CFIFO_ERR 0x1 /* Chroma FIFO Error */
@@ -2472,33 +2361,6 @@
#define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */
#define BCODE_NOBOOT 0x0030 /* always perform full boot */
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */
-#define CNTMODE_BINENC 0x0100 /* binary encoder mode */
-#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */
-#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */
-#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */
-
-#define BNDMODE_COMP 0x0000 /* boundary compare mode */
-#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */
-#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
-#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
-
/* TMODE in TIMERx_CONFIG bit field options */
#define PWM_OUT 0x0001