diff options
Diffstat (limited to 'arch/blackfin/mach-bf609/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 304 |
1 files changed, 295 insertions, 9 deletions
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index ac64f47217c..c2cf1ae3118 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -677,11 +677,28 @@ int bf609_nor_flash_init(struct platform_device *dev) return 0; } +void bf609_nor_flash_exit(struct platform_device *dev) +{ + const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + + peripheral_free_list(pins); + + bfin_write32(SMC_GCTL, 0); +} + static struct physmap_flash_data ezkit_flash_data = { .width = 2, .parts = ezkit_partitions, - .init = bf609_nor_flash_init, + .init = bf609_nor_flash_init, + .exit = bf609_nor_flash_exit, .nr_parts = ARRAY_SIZE(ezkit_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif }; static struct resource ezkit_flash_resource = { @@ -739,7 +756,7 @@ static struct bfin6xx_spi_chip spidev_chip_info = { }; #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, @@ -825,6 +842,12 @@ static struct adau1761_platform_data adau1761_info = { static const unsigned short ppi_req[] = { P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, +#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE) + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, +#endif P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0, }; @@ -855,7 +878,7 @@ static struct bcap_route vs6624_routes[] = { }, }; -static const unsigned vs6624_ce_pin = GPIO_PD1; +static const unsigned vs6624_ce_pin = GPIO_PE4; static struct bfin_capture_config bfin_capture_data = { .card_name = "BF609", @@ -871,7 +894,128 @@ static struct bfin_capture_config bfin_capture_data = { .ppi_info = &ppi_info, .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI | EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), - .blank_clocks = 8, + .blank_pixels = 4, +}; +#endif + +#if defined(CONFIG_VIDEO_ADV7842) \ + || defined(CONFIG_VIDEO_ADV7842_MODULE) +#include <media/adv7842.h> + +static struct v4l2_input adv7842_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, + { + .index = 3, + .name = "VGA", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, + { + .index = 4, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, +}; + +static struct bcap_route adv7842_routes[] = { + { + .input = 3, + .output = 0, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), + }, + { + .input = 4, + .output = 0, + }, + { + .input = 2, + .output = 0, + }, + { + .input = 1, + .output = 0, + }, + { + .input = 0, + .output = 1, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2 + | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + }, +}; + +static struct adv7842_output_format adv7842_opf[] = { + { + .op_ch_sel = ADV7842_OP_CH_SEL_BRG, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8, + .op_656_range = 1, + .blank_data = 1, + .insert_av_codes = 1, + }, + { + .op_ch_sel = ADV7842_OP_CH_SEL_RGB, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16, + .op_656_range = 1, + .blank_data = 1, + }, +}; + +static struct adv7842_platform_data adv7842_data = { + .opf = adv7842_opf, + .num_opf = ARRAY_SIZE(adv7842_opf), + .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1, + .prim_mode = ADV7842_PRIM_MODE_SDP, + .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, + .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO, + .i2c_sdp_io = 0x40, + .i2c_sdp = 0x41, + .i2c_cp = 0x42, + .i2c_vdp = 0x43, + .i2c_afe = 0x44, + .i2c_hdmi = 0x45, + .i2c_repeater = 0x46, + .i2c_edid = 0x47, + .i2c_infoframe = 0x48, + .i2c_cec = 0x49, + .i2c_avlink = 0x4a, + .i2c_ex = 0x26, +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = adv7842_inputs, + .num_inputs = ARRAY_SIZE(adv7842_inputs), + .routes = adv7842_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7842", + .addr = 0x20, + .platform_data = (void *)&adv7842_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), }; #endif @@ -883,6 +1027,80 @@ static struct platform_device bfin_capture_device = { }; #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_display.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req_disp[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req_disp, +}; + +#if defined(CONFIG_VIDEO_ADV7511) \ + || defined(CONFIG_VIDEO_ADV7511_MODULE) +#include <media/adv7511.h> + +static struct v4l2_output adv7511_outputs[] = { + { + .index = 0, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + }, +}; + +static struct disp_route adv7511_routes[] = { + { + .output = 0, + }, +}; + +static struct adv7511_platform_data adv7511_data = { + .edid_addr = 0x7e, + .i2c_ex = 0x25, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7511_outputs, + .num_outputs = ARRAY_SIZE(adv7511_outputs), + .routes = adv7511_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7511", + .addr = 0x39, + .platform_data = (void *)&adv7511_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3 + | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +static struct platform_device bfin_display_device = { + .name = "bfin_display", + .dev = { + .platform_data = &bfin_display_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CRC) #define BFIN_CRC_NAME "bfin-crc" @@ -947,6 +1165,39 @@ static struct platform_device bfin_crc1_device = { }; #endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) +#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc" +#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c + +static struct resource bfin_crypto_crc_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crypto_crc_device = { + .name = BFIN_CRYPTO_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources), + .resource = bfin_crypto_crc_resources, + .dev = { + .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA, + }, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, @@ -963,6 +1214,28 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -981,10 +1254,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ + .irq = IRQ_PD9, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = 4, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1050,7 +1323,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin6xx_spi_master bf60x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1065,7 +1338,7 @@ static struct platform_device bf60x_spi_master0 = { }; static struct bfin6xx_spi_master bf60x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1146,6 +1419,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { .platform_data = (void *)&adau1761_info }, #endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { @@ -1261,6 +1539,9 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_crc0_device, &bfin_crc1_device, #endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) + &bfin_crypto_crc_device, +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -1269,7 +1550,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) &bfin_i2s_pcm, #endif #if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ @@ -1284,6 +1565,11 @@ static struct platform_device *ezkit_devices[] __initdata = { || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) &bfin_capture_device, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) + &bfin_display_device, +#endif + }; static int __init ezkit_init(void) |