diff options
Diffstat (limited to 'arch/blackfin/mach-bf609/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 943f7e95ec1..1ba4600de69 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -20,7 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-adi2.h> -#include <asm/bfin_spi3.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin_spi3_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if IS_ENABLED(CONFIG_SPI_SPIDEV) -static struct bfin_spi3_chip spidev_chip_info = { +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin_spi3_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin_spi3_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif @@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), |