diff options
Diffstat (limited to 'arch/blackfin')
32 files changed, 118 insertions, 156 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 672c21632f2..8addb1220b4 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -34,7 +34,6 @@ config BLACKFIN select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP - select GENERIC_HARDIRQS_NO_DEPRECATED config GENERIC_CSUM def_bool y diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index acb83799a21..2641731f24c 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -59,7 +59,7 @@ config EXACT_HWERR be reported multiple cycles after the error happens. This delay can cause the wrong application, or even the kernel to receive a signal to be killed. If you are getting HW errors in your system, - try turning this on to ensure they are at least comming from the + try turning this on to ensure they are at least coming from the proper thread. On production systems, it is safe (and a small optimization) to say N. diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig index 362f59dd522..ad0881ba30a 100644 --- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig +++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig @@ -46,7 +46,6 @@ CONFIG_UNIX=y # CONFIG_WIRELESS is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 6883803e6ca..580bf4296a1 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -70,7 +70,6 @@ CONFIG_MTD_ROM=m CONFIG_MTD_PHYSMAP=m CONFIG_MTD_NAND=m CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_PHYLIB=y CONFIG_SMSC_PHY=y diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index b7c8451f26a..77a27e31d6d 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -63,7 +63,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 97ebe09a737..85014319672 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index c2457543e58..dbf750cd2db 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -64,7 +64,6 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_GPIO_ADDR=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index baf1c1573e5..07ffbdae34e 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -44,7 +44,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_RAM=y CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index df267588efe..31d954216c0 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -63,7 +63,6 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m # CONFIG_SCSI_LOWLEVEL is not set diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig index f50313657f3..b192acfae38 100644 --- a/arch/blackfin/configs/DNP5370_defconfig +++ b/arch/blackfin/configs/DNP5370_defconfig @@ -55,7 +55,6 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_DAVICOM_PHY=y CONFIG_NET_ETHERNET=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 7450127b645..06e9f497fae 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -45,6 +45,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y # CONFIG_M25PXX_USE_FAST_READ is not set CONFIG_BLK_DEV_RAM=y +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 853809510ee..12e66cd7cda 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -48,6 +48,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_UCLINUX=y CONFIG_MTD_NAND=m CONFIG_BLK_DEV_RAM=y +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=m CONFIG_NETDEVICES=y # CONFIG_NETDEV_1000 is not set diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 49762c6bb0d..8a0fed16058 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -25,7 +25,6 @@ #include <asm-generic/bitops/const_hweight.h> #include <asm-generic/bitops/lock.h> -#include <asm-generic/bitops/le.h> #include <asm-generic/bitops/ext2-atomic.h> #ifndef CONFIG_SMP @@ -113,6 +112,9 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) #endif /* CONFIG_SMP */ +/* Needs to be after test_bit and friends */ +#include <asm-generic/bitops/le.h> + /* * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 19e2c7c3e63..44bd0cced72 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -19,11 +19,11 @@ * Force strict CPU ordering. */ #define nop() __asm__ __volatile__ ("nop;\n\t" : : ) -#define mb() __asm__ __volatile__ ("" : : : "memory") -#define rmb() __asm__ __volatile__ ("" : : : "memory") -#define wmb() __asm__ __volatile__ ("" : : : "memory") -#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) -#define read_barrier_depends() do { } while(0) +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define smp_read_barrier_depends() read_barrier_depends() #ifdef CONFIG_SMP asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value); @@ -37,16 +37,16 @@ asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr, unsigned long new, unsigned long old); #ifdef __ARCH_SYNC_CORE_DCACHE -# define smp_mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) -# define smp_rmb() do { barrier(); smp_check_barrier(); } while (0) -# define smp_wmb() do { barrier(); smp_mark_barrier(); } while (0) -#define smp_read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) - +/* Force Core data cache coherence */ +# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) +# define rmb() do { barrier(); smp_check_barrier(); } while (0) +# define wmb() do { barrier(); smp_mark_barrier(); } while (0) +# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) #else -# define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -#define smp_read_barrier_depends() barrier() +# define mb() barrier() +# define rmb() barrier() +# define wmb() barrier() +# define read_barrier_depends() do { } while (0) #endif static inline unsigned long __xchg(unsigned long x, volatile void *ptr, @@ -99,10 +99,10 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, #else /* !CONFIG_SMP */ -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() do { } while (0) struct __xchg_dummy { unsigned long a[100]; diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 9fe0da612c0..70c4e511cae 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -57,7 +57,7 @@ #define HWC_x3(level) \ "External Memory Addressing Error\n" #define EXC_0x04(level) \ - "Unimplmented exception occured\n" \ + "Unimplmented exception occurred\n" \ level " - Maybe you forgot to install a custom exception handler?\n" #define HWC_x12(level) \ "Performance Monitor Overflow\n" diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index cdbe075de1d..8b81dc04488 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -268,7 +268,7 @@ void disable_gptimers(uint16_t mask) _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) - group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i]; + group_regs[BFIN_TIMER_OCTET(i)]->status = trun_mask[i]; SSYNC(); } EXPORT_SYMBOL(disable_gptimers); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 8f079392aff..1696d34f51c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -48,7 +48,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); - seq_printf(p, " %8s", get_irq_desc_chip(desc)->name); + seq_printf(p, " %8s", irq_desc_get_chip(desc)->name); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) seq_printf(p, " %s", action->name); diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index b8cfe34989e..9b80b152435 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -181,7 +181,7 @@ static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) return -ENOSPC; } - /* Becasue hardware data watchpoint impelemented in current + /* Because hardware data watchpoint impelemented in current * Blackfin can not trigger an exception event as the hardware * instrction watchpoint does, we ignaore all data watch point here. * They can be turned on easily after future blackfin design diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index a6dfa6b71e6..35e350cad9d 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -4,7 +4,7 @@ * Licensed under the GPL-2 or later */ -#define pr_fmt(fmt) "module %s: " fmt +#define pr_fmt(fmt) "module %s: " fmt, mod->name #include <linux/moduleloader.h> #include <linux/elf.h> @@ -57,8 +57,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l1_inst_sram_alloc(s->sh_size); mod->arch.text_l1 = dest; if (dest == NULL) { - pr_err("L1 inst memory allocation failed\n", - mod->name); + pr_err("L1 inst memory allocation failed\n"); return -1; } dma_memcpy(dest, (void *)s->sh_addr, s->sh_size); @@ -70,8 +69,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l1_data_sram_alloc(s->sh_size); mod->arch.data_a_l1 = dest; if (dest == NULL) { - pr_err("L1 data memory allocation failed\n", - mod->name); + pr_err("L1 data memory allocation failed\n"); return -1; } memcpy(dest, (void *)s->sh_addr, s->sh_size); @@ -83,8 +81,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l1_data_sram_zalloc(s->sh_size); mod->arch.bss_a_l1 = dest; if (dest == NULL) { - pr_err("L1 data memory allocation failed\n", - mod->name); + pr_err("L1 data memory allocation failed\n"); return -1; } @@ -93,8 +90,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l1_data_B_sram_alloc(s->sh_size); mod->arch.data_b_l1 = dest; if (dest == NULL) { - pr_err("L1 data memory allocation failed\n", - mod->name); + pr_err("L1 data memory allocation failed\n"); return -1; } memcpy(dest, (void *)s->sh_addr, s->sh_size); @@ -104,8 +100,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l1_data_B_sram_alloc(s->sh_size); mod->arch.bss_b_l1 = dest; if (dest == NULL) { - pr_err("L1 data memory allocation failed\n", - mod->name); + pr_err("L1 data memory allocation failed\n"); return -1; } memset(dest, 0, s->sh_size); @@ -117,8 +112,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l2_sram_alloc(s->sh_size); mod->arch.text_l2 = dest; if (dest == NULL) { - pr_err("L2 SRAM allocation failed\n", - mod->name); + pr_err("L2 SRAM allocation failed\n"); return -1; } memcpy(dest, (void *)s->sh_addr, s->sh_size); @@ -130,8 +124,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l2_sram_alloc(s->sh_size); mod->arch.data_l2 = dest; if (dest == NULL) { - pr_err("L2 SRAM allocation failed\n", - mod->name); + pr_err("L2 SRAM allocation failed\n"); return -1; } memcpy(dest, (void *)s->sh_addr, s->sh_size); @@ -143,8 +136,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, dest = l2_sram_zalloc(s->sh_size); mod->arch.bss_l2 = dest; if (dest == NULL) { - pr_err("L2 SRAM allocation failed\n", - mod->name); + pr_err("L2 SRAM allocation failed\n"); return -1; } @@ -160,9 +152,9 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, int apply_relocate(Elf_Shdr * sechdrs, const char *strtab, - unsigned int symindex, unsigned int relsec, struct module *me) + unsigned int symindex, unsigned int relsec, struct module *mod) { - pr_err(".rel unsupported\n", me->name); + pr_err(".rel unsupported\n"); return -ENOEXEC; } @@ -186,7 +178,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, Elf32_Sym *sym; unsigned long location, value, size; - pr_debug("applying relocate section %u to %u\n", mod->name, + pr_debug("applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { @@ -203,14 +195,14 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, #ifdef CONFIG_SMP if (location >= COREB_L1_DATA_A_START) { - pr_err("cannot relocate in L1: %u (SMP kernel)", - mod->name, ELF32_R_TYPE(rel[i].r_info)); + pr_err("cannot relocate in L1: %u (SMP kernel)\n", + ELF32_R_TYPE(rel[i].r_info)); return -ENOEXEC; } #endif pr_debug("location is %lx, value is %lx type is %d\n", - mod->name, location, value, ELF32_R_TYPE(rel[i].r_info)); + location, value, ELF32_R_TYPE(rel[i].r_info)); switch (ELF32_R_TYPE(rel[i].r_info)) { @@ -230,11 +222,11 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, case R_BFIN_PCREL12_JUMP_S: case R_BFIN_PCREL10: pr_err("unsupported relocation: %u (no -mlong-calls?)\n", - mod->name, ELF32_R_TYPE(rel[i].r_info)); + ELF32_R_TYPE(rel[i].r_info)); return -ENOEXEC; default: - pr_err("unknown relocation: %u\n", mod->name, + pr_err("unknown relocation: %u\n", ELF32_R_TYPE(rel[i].r_info)); return -ENOEXEC; } @@ -251,8 +243,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, isram_memcpy((void *)location, &value, size); break; default: - pr_err("invalid relocation for %#lx\n", - mod->name, location); + pr_err("invalid relocation for %#lx\n", location); return -ENOEXEC; } } diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c index 0b5f72f17fd..401eb1d8e3b 100644 --- a/arch/blackfin/kernel/nmi.c +++ b/arch/blackfin/kernel/nmi.c @@ -12,7 +12,7 @@ #include <linux/bitops.h> #include <linux/hardirq.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/pm.h> #include <linux/nmi.h> #include <linux/smp.h> @@ -196,43 +196,31 @@ void touch_nmi_watchdog(void) /* Suspend/resume support */ #ifdef CONFIG_PM -static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state) +static int nmi_wdt_suspend(void) { nmi_wdt_stop(); return 0; } -static int nmi_wdt_resume(struct sys_device *dev) +static void nmi_wdt_resume(void) { if (nmi_active) nmi_wdt_start(); - return 0; } -static struct sysdev_class nmi_sysclass = { - .name = DRV_NAME, +static struct syscore_ops nmi_syscore_ops = { .resume = nmi_wdt_resume, .suspend = nmi_wdt_suspend, }; -static struct sys_device device_nmi_wdt = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_nmi_wdt_sysfs(void) +static int __init init_nmi_wdt_syscore(void) { - int error; - - if (!nmi_active) - return 0; + if (nmi_active) + register_syscore_ops(&nmi_syscore_ops); - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_nmi_wdt); - return error; + return 0; } -late_initcall(init_nmi_wdt_sysfs); +late_initcall(init_nmi_wdt_syscore); #endif /* CONFIG_PM */ diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 8c9a43daf80..9e9b60d969d 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -23,29 +23,6 @@ #include <asm/gptimers.h> #include <asm/nmi.h> -/* Accelerators for sched_clock() - * convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better precision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ - -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ #if defined(CONFIG_CYCLES_CLOCKSOURCE) @@ -63,7 +40,6 @@ static struct clocksource bfin_cs_cycles = { .rating = 400, .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), - .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -75,10 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void) static int __init bfin_cs_cycles_init(void) { - bfin_cs_cycles.mult = \ - clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); - - if (clocksource_register(&bfin_cs_cycles)) + if (clocksource_register_hz(&bfin_cs_cycles, get_cclk())) panic("failed to register clocksource"); return 0; @@ -111,7 +84,6 @@ static struct clocksource bfin_cs_gptimer0 = { .rating = 350, .read = bfin_read_gptimer0, .mask = CLOCKSOURCE_MASK(32), - .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -125,10 +97,7 @@ static int __init bfin_cs_gptimer0_init(void) { setup_gptimer0(); - bfin_cs_gptimer0.mult = \ - clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift); - - if (clocksource_register(&bfin_cs_gptimer0)) + if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk())) panic("failed to register clocksource"); return 0; @@ -206,8 +175,14 @@ irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; smp_mb(); - evt->event_handler(evt); + /* + * We want to ACK before we handle so that we can handle smaller timer + * intervals. This way if the timer expires again while we're handling + * things, we're more likely to see that 2nd int rather than swallowing + * it by ACKing the int at the end of this handler. + */ bfin_gptmr0_ack(); + evt->event_handler(evt); return IRQ_HANDLED; } diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c index 05b550891ce..050db44fe91 100644 --- a/arch/blackfin/kernel/trace.c +++ b/arch/blackfin/kernel/trace.c @@ -912,10 +912,11 @@ void show_regs(struct pt_regs *fp) /* if no interrupts are going off, don't print this out */ if (fp->ipend & ~0x3F) { for (i = 0; i < (NR_IRQS - 1); i++) { + struct irq_desc *desc = irq_to_desc(i); if (!in_atomic) - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); + raw_spin_lock_irqsave(&desc->lock, flags); - action = irq_desc[i].action; + action = desc->action; if (!action) goto unlock; @@ -928,7 +929,7 @@ void show_regs(struct pt_regs *fp) pr_cont("\n"); unlock: if (!in_atomic) - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); + raw_spin_unlock_irqrestore(&desc->lock, flags); } } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 59c1df75e4d..655f25d139a 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -98,7 +98,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* send the appropriate signal to the user program */ switch (trapnr) { - /* This table works in conjuction with the one in ./mach-common/entry.S + /* This table works in conjunction with the one in ./mach-common/entry.S * Some exceptions are handled there (in assembly, in exception space) * Some are handled here, (in C, in interrupt space) * Some, like CPLB, are handled in both, where the normal path is diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 3edbd8db659..79caccea85c 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -67,7 +67,7 @@ * - DMA version, which do not suffer from this issue. DMA versions have * different name (prefixed by dma_ ), and are located in * ../kernel/bfin_dma_5xx.c - * Using the dma related functions are recommended for transfering large + * Using the dma related functions are recommended for transferring large * buffers in/out of FIFOs. */ diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 80c240acac6..4eca566237a 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -60,7 +60,7 @@ ENTRY(_memmove) [P0++] = R1; CC = P2 == 0; /* any remaining bytes? */ - P3 = I0; /* Ammend P3 to updated ptr. */ + P3 = I0; /* Amend P3 to updated ptr. */ IF !CC JUMP .Lbytes; P3 = I1; RTS; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2c69785a7bb..3fa335405b3 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2530,7 +2530,7 @@ static struct resource bfin_pata_resources[] = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 0, }; -/* CompactFlash Storage Card Memory Mapped Adressing +/* CompactFlash Storage Card Memory Mapped Addressing * /REG = A11 = 1 */ static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 5d68bf613b0..7b07740cf68 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -154,13 +154,13 @@ void platform_clear_ipi(unsigned int cpu, int irq) void __cpuinit bfin_local_timer_setup(void) { #if defined(CONFIG_TICKSOURCE_CORETMR) - struct irq_chip *chip = get_irq_chip(IRQ_CORETMR); - struct irq_desc *desc = irq_to_desc(IRQ_CORETMR); + struct irq_data *data = irq_get_irq_data(IRQ_CORETMR); + struct irq_chip *chip = irq_data_get_irq_chip(data); bfin_coretmr_init(); bfin_coretmr_clockevent_init(); - chip->irq_unmask(&desc->irq_data); + chip->irq_unmask(data); #else /* Power down the core timer, just to play safe. */ bfin_write_TCNTL(0); diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index 382099fd556..5e4112e518a 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -19,9 +19,6 @@ #define DRIVER_NAME "bfin dpmc" -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg) - struct bfin_dpmc_platform_data *pdata; /** diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 46ab45704c8..f96933f48a7 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -268,7 +268,7 @@ ENTRY(_handle_bad_cplb) /* To get here, we just tried and failed to change a CPLB * so, handle things in trap_c (C code), by lowering to * IRQ5, just like we normally do. Since this is not a - * "normal" return path, we have a do alot of stuff to + * "normal" return path, we have a do a lot of stuff to * the stack to get ready so, we can fall through - we * need to make a CPLB exception look like a normal exception */ @@ -817,7 +817,7 @@ _new_old_task: rets = [sp++]; /* - * When we come out of resume, r0 carries "old" task, becuase we are + * When we come out of resume, r0 carries "old" task, because we are * in "new" task. */ rts; diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 581e2b0a71a..76de5724c1e 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -174,7 +174,7 @@ ENTRY(__start) sp.l = lo(KERNEL_CLOCK_STACK); sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; - sp = usp; /* usp hasnt been touched, so restore from there */ + sp = usp; /* usp hasn't been touched, so restore from there */ #endif /* This section keeps the processor in supervisor mode diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 6cd52395a99..43d9fb195c1 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -559,7 +559,7 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) #ifdef CONFIG_IPIPE handle = handle_level_irq; #endif - __set_irq_handler_unlocked(irq, handle); + __irq_set_handler_locked(irq, handle); } static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); @@ -578,10 +578,9 @@ static void bfin_gpio_ack_irq(struct irq_data *d) static void bfin_gpio_mask_ack_irq(struct irq_data *d) { unsigned int irq = d->irq; - struct irq_desc *desc = irq_to_desc(irq); u32 gpionr = irq_to_gpio(irq); - if (desc->handle_irq == handle_edge_irq) + if (!irqd_is_level_type(d)) set_gpio_data(gpionr, 0); set_gpio_maska(gpionr, 0); @@ -837,12 +836,11 @@ void init_pint_lut(void) static void bfin_gpio_ack_irq(struct irq_data *d) { - struct irq_desc *desc = irq_to_desc(d->irq); u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); u32 bank = PINT_2_BANK(pint_val); - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { if (pint[bank]->invert_set & pintbit) pint[bank]->invert_clear = pintbit; else @@ -854,12 +852,11 @@ static void bfin_gpio_ack_irq(struct irq_data *d) static void bfin_gpio_mask_ack_irq(struct irq_data *d) { - struct irq_desc *desc = irq_to_desc(d->irq); u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); u32 bank = PINT_2_BANK(pint_val); - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { if (pint[bank]->invert_set & pintbit) pint[bank]->invert_clear = pintbit; else @@ -1166,9 +1163,9 @@ int __init init_arch_irq(void) for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) - set_irq_chip(irq, &bfin_core_irqchip); + irq_set_chip(irq, &bfin_core_irqchip); else - set_irq_chip(irq, &bfin_internal_irqchip); + irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { #if defined(CONFIG_BF53x) @@ -1192,50 +1189,50 @@ int __init init_arch_irq(void) #elif defined(CONFIG_BF538) || defined(CONFIG_BF539) case IRQ_PORTF_INTA: #endif - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); + irq_set_chained_handler(irq, bfin_demux_gpio_irq); break; #ifdef BF537_GENERIC_ERROR_INT_DEMUX case IRQ_GENERIC_ERROR: - set_irq_chained_handler(irq, bfin_demux_error_irq); + irq_set_chained_handler(irq, bfin_demux_error_irq); break; #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) case IRQ_MAC_ERROR: - set_irq_chained_handler(irq, bfin_demux_mac_status_irq); + irq_set_chained_handler(irq, + bfin_demux_mac_status_irq); break; #endif #ifdef CONFIG_SMP case IRQ_SUPPLE_0: case IRQ_SUPPLE_1: - set_irq_handler(irq, handle_percpu_irq); + irq_set_handler(irq, handle_percpu_irq); break; #endif #ifdef CONFIG_TICKSOURCE_CORETMR case IRQ_CORETMR: # ifdef CONFIG_SMP - set_irq_handler(irq, handle_percpu_irq); + irq_set_handler(irq, handle_percpu_irq); break; # else - set_irq_handler(irq, handle_simple_irq); + irq_set_handler(irq, handle_simple_irq); break; # endif #endif #ifdef CONFIG_TICKSOURCE_GPTMR0 case IRQ_TIMER0: - set_irq_handler(irq, handle_simple_irq); + irq_set_handler(irq, handle_simple_irq); break; #endif #ifdef CONFIG_IPIPE default: - set_irq_handler(irq, handle_level_irq); + irq_set_handler(irq, handle_level_irq); break; #else /* !CONFIG_IPIPE */ default: - set_irq_handler(irq, handle_simple_irq); + irq_set_handler(irq, handle_simple_irq); break; #endif /* !CONFIG_IPIPE */ } @@ -1243,22 +1240,22 @@ int __init init_arch_irq(void) #ifdef BF537_GENERIC_ERROR_INT_DEMUX for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) - set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip, + irq_set_chip_and_handler(irq, &bfin_generic_error_irqchip, handle_level_irq); #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - set_irq_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); + irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); #endif #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++) - set_irq_chip_and_handler(irq, &bfin_mac_status_irqchip, + irq_set_chip_and_handler(irq, &bfin_mac_status_irqchip, handle_level_irq); #endif /* if configured as edge, then will be changed to do_edge_IRQ */ for (irq = GPIO_IRQ_BASE; irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) - set_irq_chip_and_handler(irq, &bfin_gpio_irqchip, + irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); bfin_write_IMASK(0); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 6e17a265c4d..1fbd94c4445 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -109,10 +109,23 @@ static void ipi_flush_icache(void *info) struct blackfin_flush_data *fdata = info; /* Invalidate the memory holding the bounds of the flushed region. */ - invalidate_dcache_range((unsigned long)fdata, - (unsigned long)fdata + sizeof(*fdata)); + blackfin_dcache_invalidate_range((unsigned long)fdata, + (unsigned long)fdata + sizeof(*fdata)); + + /* Make sure all write buffers in the data side of the core + * are flushed before trying to invalidate the icache. This + * needs to be after the data flush and before the icache + * flush so that the SSYNC does the right thing in preventing + * the instruction prefetcher from hitting things in cached + * memory at the wrong time -- it runs much further ahead than + * the pipeline. + */ + SSYNC(); - flush_icache_range(fdata->start, fdata->end); + /* ipi_flaush_icache is invoked by generic flush_icache_range, + * so call blackfin arch icache flush directly here. + */ + blackfin_icache_flush_range(fdata->start, fdata->end); } static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) @@ -164,6 +177,9 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) while (msg_queue->count) { msg = &msg_queue->ipi_message[msg_queue->head]; switch (msg->type) { + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; case BFIN_IPI_CALL_FUNC: spin_unlock_irqrestore(&msg_queue->lock, flags); ipi_call_function(cpu, msg); |