diff options
Diffstat (limited to 'arch/blackfin')
115 files changed, 12555 insertions, 2275 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 53c1e1d45c6..c078849df7f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -23,12 +23,15 @@ config RWSEM_XCHGADD_ALGORITHM config BLACKFIN def_bool y + select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_IDE - select HAVE_KERNEL_GZIP - select HAVE_KERNEL_BZIP2 - select HAVE_KERNEL_LZMA + select HAVE_KERNEL_GZIP if RAMKERNEL + select HAVE_KERNEL_BZIP2 if RAMKERNEL + select HAVE_KERNEL_LZMA if RAMKERNEL select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB @@ -45,9 +48,6 @@ config ZONE_DMA config GENERIC_FIND_NEXT_BIT def_bool y -config GENERIC_HWEIGHT - def_bool y - config GENERIC_HARDIRQS def_bool y @@ -239,7 +239,7 @@ endchoice config SMP depends on BF561 - select GENERIC_CLOCKEVENTS + select TICKSOURCE_CORETMR bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU, @@ -253,11 +253,20 @@ config NR_CPUS depends on SMP default 2 if BF561 +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG + default y + config IRQ_PER_CPU bool depends on SMP default y +config HAVE_LEGACY_PER_CPU_AREA + def_bool y + depends on SMP + config BF_REV_MIN int default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) @@ -349,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP) + depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP) default y config MEM_MT48LC32M8A2_75 @@ -401,10 +410,18 @@ config BOOT_LOAD config ROM_BASE hex "Kernel ROM Base" depends on ROMKERNEL - default "0x20040000" + default "0x20040040" range 0x20000000 0x20400000 if !(BF54x || BF561) range 0x20000000 0x30000000 if (BF54x || BF561) help + Make sure your ROM base does not include any file-header + information that is prepended to the kernel. + + For example, the bootable U-Boot format (created with + mkimage) has a 64 byte header (0x40). So while the image + you write to flash might start at say 0x20080000, you have + to add 0x40 to get the kernel's ROM base as it will come + after the header. comment "Clock/PLL Setup" @@ -448,7 +465,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT @@ -609,23 +626,23 @@ config GENERIC_CLOCKEVENTS bool "Generic clock events" default y -choice - prompt "Kernel Tick Source" +menu "Clock event device" depends on GENERIC_CLOCKEVENTS - default TICKSOURCE_CORETMR - config TICKSOURCE_GPTMR0 - bool "Gptimer0 (SCLK domain)" + bool "GPTimer0" + depends on !SMP select BFIN_GPTIMERS config TICKSOURCE_CORETMR - bool "Core timer (CCLK domain)" - -endchoice + bool "Core timer" + default y +endmenu -config CYCLES_CLOCKSOURCE - bool "Use 'CYCLES' as a clocksource" +menu "Clock souce" depends on GENERIC_CLOCKEVENTS +config CYCLES_CLOCKSOURCE + bool "CYCLES" + default y depends on !BFIN_SCRATCH_REG_CYCLES depends on !SMP help @@ -636,10 +653,10 @@ config CYCLES_CLOCKSOURCE writing the registers will most likely crash the kernel. config GPTMR0_CLOCKSOURCE - bool "Use GPTimer0 as a clocksource" + bool "GPTimer0" select BFIN_GPTIMERS - depends on GENERIC_CLOCKEVENTS depends on !TICKSOURCE_GPTMR0 +endmenu config ARCH_USES_GETTIMEOFFSET depends on !GENERIC_CLOCKEVENTS @@ -1116,24 +1133,6 @@ config PCI source "drivers/pci/Kconfig" -config HOTPLUG - bool "Support for hot-pluggable device" - help - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. - - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. - - Enable HOTPLUG and build a modular kernel. Get agent software - (from <http://linux-hotplug.sourceforge.net/>) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. - source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" @@ -1147,7 +1146,6 @@ source "fs/Kconfig.binfmt" endmenu menu "Power management options" - depends on !SMP source "kernel/power/Kconfig" @@ -1240,7 +1238,6 @@ config PM_BFIN_WAKE_GP endmenu menu "CPU Frequency scaling" - depends on !SMP source "drivers/cpufreq/Kconfig" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 87f195ee2e0..aec89a5280b 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -18,9 +18,6 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config HAVE_ARCH_KGDB - def_bool y - config DEBUG_VERBOSE bool "Verbose fault messages" default y @@ -238,6 +235,15 @@ config EARLY_PRINTK all of this lives in the init section and is thrown away after the kernel boots completely. +config NMI_WATCHDOG + bool "Enable NMI watchdog to help debugging lockup on SMP" + default n + depends on (SMP && !BFIN_SCRATCH_REG_RETN) + help + If any CPU in the system does not execute the period local timer + interrupt for more than 5 seconds, then the NMI handler dumps debug + information. This information can be used to debug the lockup. + config CPLB_INFO bool "Display the CPLB information" help diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d4c7177e765..5a97a31d4bb 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -14,6 +14,9 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -S GZFLAGS := -9 KBUILD_CFLAGS += $(call cc-option,-mno-fdpic) +ifeq ($(CONFIG_ROMKERNEL),y) +KBUILD_CFLAGS += -mlong-calls +endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) CFLAGS_MODULE += -mlong-calls LDFLAGS_MODULE += -m elf32bfin @@ -130,7 +133,6 @@ KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs)) CLEAN_FILES += \ - arch/$(ARCH)/include/asm/asm-offsets.h \ arch/$(ARCH)/kernel/asm-offsets.s \ archclean: @@ -138,7 +140,7 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma +BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip PHONY += $(BOOT_TARGETS) install KBUILD_IMAGE := $(boot)/vmImage @@ -156,6 +158,7 @@ define archhelp echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)' echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)' echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)' + echo ' vmImage.xip - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)' echo ' install - Install kernel using' echo ' (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) PATH: $(INSTALLKERNEL) or' diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index e9c48c6f8c1..d1b3d6051fd 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -8,14 +8,18 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma -extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma +targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip +extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip + +UIMAGE_OPTS-y := +UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD) +UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ + -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' \ -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ - -d $< $@ + $(UIMAGE_OPTS-y) -d $< $@ $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @@ -29,6 +33,12 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +# The mkimage tool wants 64bytes prepended to the image +quiet_cmd_mk_bin_xip = BIN $@ + cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@ +$(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE + $(call if_changed,mk_bin_xip) + $(obj)/vmImage.bin: $(obj)/vmlinux.bin $(call if_changed,uimage,none) @@ -41,10 +51,15 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip + $(call if_changed,uimage,none) + suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_ROMKERNEL) := xip + $(obj)/vmImage: $(obj)/vmImage.$(suffix-y) @ln -sf $(notdir $<) $@ diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index e3155941981..cf7c9bc94f1 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_BF518=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 @@ -154,8 +182,8 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BF51x=y CONFIG_MEM_MT48LC32M8A2_75=y +CONFIG_BF51x=y CONFIG_BFIN518F_EZBRD=y # @@ -313,7 +341,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -322,16 +349,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -342,7 +371,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -398,11 +427,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -426,7 +450,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -437,6 +460,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -450,7 +474,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -461,13 +488,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -488,6 +510,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -545,6 +568,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -560,6 +584,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -576,10 +605,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -614,6 +653,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -622,10 +664,14 @@ CONFIG_BFIN_MAC=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set +CONFIG_BFIN_MAC_USE_HWSTAMP=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -634,15 +680,16 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -677,7 +724,10 @@ CONFIG_INPUT=y # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -688,16 +738,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y @@ -715,6 +762,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -726,12 +774,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -739,6 +785,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -771,14 +818,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -795,13 +834,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -817,6 +861,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -827,11 +872,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -853,28 +902,20 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -912,10 +953,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set CONFIG_SDH_BFIN=m CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y -# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set -# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -950,6 +992,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -961,6 +1004,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -981,10 +1025,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # CONFIG_EXT2_FS=m @@ -994,9 +1049,13 @@ CONFIG_EXT2_FS=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1006,6 +1065,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1027,13 +1091,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1042,8 +1102,8 @@ CONFIG_SYSFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -# CONFIG_YAFFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1062,7 +1122,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1127,14 +1186,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1142,31 +1206,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1191,6 +1263,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1199,14 +1272,14 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1238,11 +1311,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1279,6 +1354,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1286,11 +1362,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1299,6 +1377,8 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 075e0fdcb39..31c2a6db6ec 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_BF526=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 @@ -154,8 +182,7 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BF52x=y -CONFIG_MEM_MT48LC32M16A2TG_75=y +CONFIG_MEM_MT48H32M16LFCJ_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +CONFIG_BF52x=y # CONFIG_BFIN527_EZKIT is not set +# CONFIG_BFIN527_EZKIT_V2 is not set # CONFIG_BFIN527_BLUETECHNIX_CM is not set CONFIG_BFIN526_EZBRD=y @@ -318,7 +347,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -347,6 +377,10 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # +# Asynchronous Memory Configuration +# + +# # EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y @@ -399,11 +433,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -427,7 +456,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -438,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -451,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -462,13 +494,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -489,6 +516,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -549,6 +577,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -564,11 +593,6 @@ CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_BFIN=m -CONFIG_BFIN_NAND_BASE=0x20212000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_BF5XX is not set # CONFIG_MTD_NAND_DISKONCHIP is not set @@ -578,6 +602,11 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -595,10 +624,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -622,10 +661,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -642,6 +677,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -666,6 +702,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -675,9 +714,12 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -686,15 +728,16 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -744,7 +787,11 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_BFIN_ROTARY is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -755,16 +802,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y @@ -782,6 +826,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -793,14 +838,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -808,6 +849,7 @@ CONFIG_BFIN_OTP=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -841,14 +883,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -865,13 +899,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -887,6 +926,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -897,11 +937,20 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD5252 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -914,11 +963,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -934,17 +985,24 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -954,9 +1012,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -983,28 +1040,20 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1026,7 +1075,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1039,30 +1087,35 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1088,6 +1141,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set @@ -1118,18 +1172,17 @@ CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1165,7 +1218,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1177,6 +1229,13 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_NOP_USB_XCEIV=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1212,6 +1271,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1223,6 +1283,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1243,10 +1304,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # CONFIG_EXT2_FS=m @@ -1256,9 +1328,13 @@ CONFIG_EXT2_FS=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1268,6 +1344,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1291,13 +1372,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1316,17 +1393,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1345,7 +1413,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1360,7 +1427,7 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1410,14 +1477,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1425,31 +1497,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1474,6 +1554,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1482,15 +1563,15 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1522,11 +1603,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1563,6 +1646,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1570,11 +1654,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1584,6 +1670,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig new file mode 100644 index 00000000000..d2dfcb0e7ce --- /dev/null +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -0,0 +1,1811 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32.2 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +CONFIG_BF527=y +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set +# CONFIG_BF542_std is not set +# CONFIG_BF542M is not set +# CONFIG_BF544_std is not set +# CONFIG_BF544M is not set +# CONFIG_BF547_std is not set +# CONFIG_BF547M is not set +# CONFIG_BF548_std is not set +# CONFIG_BF548M is not set +# CONFIG_BF549_std is not set +# CONFIG_BF549M is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_MEM_MT48LC32M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_DMAR0_BLK=7 +CONFIG_IRQ_DMAR1_BLK=7 +CONFIG_IRQ_DMAR0_OVR=7 +CONFIG_IRQ_DMAR1_OVR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_MAC_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_OPTSEC=11 +CONFIG_IRQ_CNT=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_PORTH_INTA=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_PORTH_INTB=11 +CONFIG_IRQ_TIMER0=8 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 +CONFIG_IRQ_PORTG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=13 +CONFIG_IRQ_PORTF_INTB=13 +CONFIG_BF52x=y +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_EZKIT_V2=y +# CONFIG_BFIN527_BLUETECHNIX_CM is not set +# CONFIG_BFIN526_EZBRD is not set + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_SPI_ERROR=7 +CONFIG_IRQ_NFC_ERROR=7 +CONFIG_IRQ_HDMA_ERROR=7 +CONFIG_IRQ_HDMA=7 +CONFIG_IRQ_USB_EINT=10 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BFIN_GPTIMERS=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set + +# +# Asynchronous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR0=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_BF5XX is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5520=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +CONFIG_TOUCHSCREEN_AD7879_I2C=y +CONFIG_TOUCHSCREEN_AD7879=y +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_BFIN_ROTARY is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BFIN_SPI_ADC is not set +CONFIG_BFIN_SPORT=m +# CONFIG_BFIN_TWI_LCD is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +CONFIG_BFIN_JTAG_COMM=m +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +# CONFIG_SERIAL_BFIN_UART0 is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5520 is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_ADP5520=y +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_BFIN_T350MCQB is not set +CONFIG_FB_BFIN_LQ035Q1=y +# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP5520 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_SPI=y + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BFIN_AD73322 is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_BF5XX_I2S=m +CONFIG_SND_BF5XX_SOC_SSM2602=m +# CONFIG_SND_BF5XX_SOC_AD73311 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_TDM is not set +CONFIG_SND_BF5XX_AC97=m +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_SOC_AD1980=m +CONFIG_SND_BF5XX_SOC_SPORT=m +CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AD1980=m +CONFIG_SND_SOC_SSM2602=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin high speed USB Support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_NOP_USB_XCEIV=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_ADP5520=y + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +CONFIG_NLS_CODEPAGE_936=m +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 6d1a623fb14..edbb44d26bb 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,29 +160,28 @@ CONFIG_BF527=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set -# CONFIG_BF_REV_0_1 is not set -CONFIG_BF_REV_0_2=y +CONFIG_BF_REV_0_1=y +# CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BF52x=y CONFIG_MEM_MT48LC32M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 @@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +CONFIG_BF52x=y CONFIG_BFIN527_EZKIT=y +# CONFIG_BFIN527_EZKIT_V2 is not set # CONFIG_BFIN527_BLUETECHNIX_CM is not set # CONFIG_BFIN526_EZBRD is not set @@ -318,7 +347,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -347,7 +377,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -403,11 +433,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -431,7 +456,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -442,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -455,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -508,13 +536,8 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -535,6 +558,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -593,6 +617,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -608,11 +633,6 @@ CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_BFIN=m -CONFIG_BFIN_NAND_BASE=0x20212000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_BF5XX is not set # CONFIG_MTD_NAND_DISKONCHIP is not set @@ -622,6 +642,11 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -639,10 +664,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -666,10 +701,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -686,6 +717,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -710,6 +742,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -720,9 +755,12 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -731,15 +769,16 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -789,7 +828,11 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_BFIN_ROTARY is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -800,16 +843,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y @@ -827,6 +867,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -838,14 +879,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -853,6 +890,7 @@ CONFIG_BFIN_OTP=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -886,14 +924,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -910,13 +940,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -932,6 +967,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -942,11 +978,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -973,28 +1013,21 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1030,15 +1063,18 @@ CONFIG_FB_BFIN_T350MCQB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set CONFIG_LCD_LTV350QV=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP8870 is not set # # Display device support @@ -1066,6 +1102,7 @@ CONFIG_SOUND=m CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -1074,6 +1111,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1084,7 +1126,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -# CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set @@ -1094,15 +1135,19 @@ CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m CONFIG_SND_BF5XX_SOC_SSM2602=m # CONFIG_SND_BF5XX_SOC_AD73311 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m CONFIG_SND_BF5XX_MMAP_SUPPORT=y # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SOC_SPORT=m CONFIG_SND_BF5XX_SOC_I2S=m CONFIG_SND_BF5XX_SOC_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m CONFIG_SND_SOC_SSM2602=m @@ -1110,7 +1155,6 @@ CONFIG_SND_SOC_SSM2602=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1123,30 +1167,35 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1172,6 +1221,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set @@ -1188,9 +1238,7 @@ CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_INVENTRA_DMA=y -# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_MUSB_PIO_ONLY=y # CONFIG_USB_MUSB_DEBUG is not set # @@ -1202,18 +1250,17 @@ CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1249,7 +1296,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1261,6 +1307,13 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_NOP_USB_XCEIV=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1296,6 +1349,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1307,6 +1361,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1327,10 +1382,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # CONFIG_EXT2_FS=m @@ -1340,9 +1406,13 @@ CONFIG_EXT2_FS=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1352,6 +1422,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1376,13 +1451,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1401,17 +1472,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1430,7 +1492,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1445,7 +1506,7 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1495,14 +1556,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1510,31 +1576,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1559,6 +1633,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1567,15 +1642,15 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1607,11 +1682,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1648,6 +1725,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1655,11 +1733,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1669,6 +1749,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 50f9a23ccdb..0b13d5836a4 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_BF533=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=3 @@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y -# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -280,7 +308,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -289,19 +316,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # -# -# Cache Support -# CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -312,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -358,6 +384,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set @@ -379,11 +406,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -407,7 +429,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -418,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -431,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -475,13 +500,8 @@ CONFIG_IRTTY_SIR=m # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -502,6 +522,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -559,6 +580,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -574,6 +596,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -590,9 +617,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -616,9 +648,12 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -627,15 +662,16 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -679,15 +715,12 @@ CONFIG_INPUT_EVDEV=m # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -701,6 +734,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -711,12 +745,8 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -734,13 +764,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -753,9 +788,6 @@ CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -766,11 +798,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -793,23 +829,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -826,14 +849,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -864,6 +885,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -884,10 +906,20 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -896,9 +928,13 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -908,6 +944,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -926,13 +967,9 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -951,17 +988,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -980,7 +1008,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1045,14 +1072,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1060,31 +1092,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1109,6 +1149,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1117,14 +1158,14 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1156,11 +1197,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1197,6 +1240,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1204,11 +1248,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1218,6 +1264,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 6c60c828631..c3fe6e5b612 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_BF533=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=3 @@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y -# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -280,7 +308,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -289,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -309,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -355,6 +384,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set @@ -376,11 +406,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -404,7 +429,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -415,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -428,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -474,13 +502,8 @@ CONFIG_SIR_BFIN_DMA=y # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,6 +524,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -560,6 +584,7 @@ CONFIG_MTD_BFIN_ASYNC=m # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -575,6 +600,11 @@ CONFIG_MTD_BFIN_ASYNC=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -591,10 +621,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -618,9 +658,12 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -629,15 +672,16 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -672,7 +716,10 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -CONFIG_CONFIG_INPUT_PCF8574=m +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -683,16 +730,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -706,6 +750,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -716,12 +761,8 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -729,6 +770,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -759,14 +801,6 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -783,13 +817,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -805,6 +844,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -815,11 +855,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -841,26 +885,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -904,6 +940,7 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -913,19 +950,27 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -936,13 +981,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -CONFIG_SND_BLACKFIN_AD1836=m -CONFIG_SND_BLACKFIN_AD1836_TDM=y -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -CONFIG_SND_BLACKFIN_AD1836_MULSUB=y -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_SPORT=0 -CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73322=m CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 @@ -953,16 +991,20 @@ CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_AD73311=m +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set CONFIG_SND_BFIN_AD73311_SE=4 +# CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m CONFIG_SND_BF5XX_MMAP_SUPPORT=y # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SOC_SPORT=m CONFIG_SND_BF5XX_SOC_I2S=m CONFIG_SND_BF5XX_SOC_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m CONFIG_SND_SOC_AD73311=m @@ -970,14 +1012,12 @@ CONFIG_SND_SOC_AD73311=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1014,6 +1054,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1025,6 +1066,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1045,10 +1087,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -1057,9 +1110,13 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1069,6 +1126,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1087,13 +1149,9 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1112,17 +1170,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1141,7 +1190,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1206,14 +1254,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1221,31 +1274,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1270,6 +1331,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1278,14 +1340,14 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1317,11 +1379,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1358,6 +1422,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1365,11 +1430,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1379,6 +1446,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 2908595b67c..7596cf7673f 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_FREEZER=y CONFIG_BF537=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=2 @@ -184,7 +212,8 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 CONFIG_BFIN537_STAMP=y -# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set # CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set @@ -235,7 +264,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y -# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -287,7 +316,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -296,16 +324,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -316,7 +346,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -362,6 +392,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set @@ -384,11 +415,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -412,7 +438,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -423,6 +448,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -436,14 +462,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_BFIN=m +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +# CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m # @@ -483,13 +529,8 @@ CONFIG_SIR_BFIN_DMA=y # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -510,6 +551,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -568,6 +610,7 @@ CONFIG_MTD_PHYSMAP=m # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -583,6 +626,11 @@ CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -599,10 +647,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -637,6 +695,9 @@ CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -647,9 +708,12 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -658,15 +722,16 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -701,7 +766,10 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -CONFIG_CONFIG_INPUT_PCF8574=m +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -712,16 +780,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -735,6 +800,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -746,17 +812,8 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -CONFIG_CAN4LINUX=y - -# -# linux embedded drivers -# -CONFIG_CAN_BLACKFIN=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -764,6 +821,7 @@ CONFIG_CAN_BLACKFIN=m # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -796,14 +854,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_SENSORS_AD5252=m -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -820,13 +870,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -842,6 +897,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -852,11 +908,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -878,26 +938,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -929,9 +981,6 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_BFIN_LQ035Q1 is not set CONFIG_FB_BF537_LQ035=m -CONFIG_LQ035_SLAVE_ADDR=0x58 -# CONFIG_FB_BFIN_LANDSCAPE is not set -# CONFIG_FB_BFIN_BGR is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -946,15 +995,18 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CORGI=m +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP8870 is not set # # Display device support @@ -963,19 +1015,27 @@ CONFIG_BACKLIGHT_CORGI=m # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -986,13 +1046,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -CONFIG_SND_BLACKFIN_AD1836=m -CONFIG_SND_BLACKFIN_AD1836_TDM=y -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -CONFIG_SND_BLACKFIN_AD1836_MULSUB=y -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_SPORT=0 -CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73322=m CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 @@ -1003,16 +1056,20 @@ CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_AD73311=m +# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set CONFIG_SND_BFIN_AD73311_SE=4 +# CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m CONFIG_SND_BF5XX_MMAP_SUPPORT=y # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SOC_SPORT=m CONFIG_SND_BF5XX_SOC_I2S=m CONFIG_SND_BF5XX_SOC_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m CONFIG_SND_SOC_AD73311=m @@ -1020,14 +1077,12 @@ CONFIG_SND_SOC_AD73311=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1064,6 +1119,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1075,6 +1131,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1095,10 +1152,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -1107,9 +1175,13 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1119,6 +1191,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1137,13 +1214,9 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1162,17 +1235,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1191,7 +1255,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1256,14 +1319,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1271,31 +1339,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1320,6 +1396,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1328,14 +1405,14 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1367,11 +1444,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1408,6 +1487,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1415,11 +1495,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1429,6 +1511,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 09ea2499555..bc1871d89fd 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 -# Thu May 21 05:50:01 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -62,6 +86,10 @@ CONFIG_EPOLL=y # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -69,11 +97,15 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -132,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF537 is not set CONFIG_BF538=y # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=4 @@ -246,7 +274,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y -# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -298,7 +326,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -307,16 +334,18 @@ CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -327,7 +356,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -383,11 +412,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -411,7 +435,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -422,6 +445,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -435,14 +459,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_BFIN=m +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +# CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m # @@ -481,13 +525,8 @@ CONFIG_SIR_BFIN_DMA=y # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -508,6 +547,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -566,6 +606,7 @@ CONFIG_MTD_PHYSMAP=m # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -581,11 +622,6 @@ CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_BFIN=m -CONFIG_BFIN_NAND_BASE=0x20212000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -593,6 +629,11 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -643,14 +684,20 @@ CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -659,15 +706,16 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -700,14 +748,17 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set CONFIG_TOUCHSCREEN_AD7879_SPI=y CONFIG_TOUCHSCREEN_AD7879=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -715,9 +766,13 @@ CONFIG_TOUCHSCREEN_AD7879=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -728,16 +783,13 @@ CONFIG_INPUT_MISC=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=m -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m @@ -751,6 +803,7 @@ CONFIG_BFIN_JTAG_COMM=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -765,12 +818,8 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -778,6 +827,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -810,14 +860,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -834,13 +876,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -856,6 +903,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -866,11 +914,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -892,26 +944,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -947,6 +990,7 @@ CONFIG_FB_BFIN_LQ035Q1=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -957,14 +1001,12 @@ CONFIG_FB_BFIN_LQ035Q1=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1001,6 +1043,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1012,6 +1055,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1032,10 +1076,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -1044,9 +1099,13 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1056,6 +1115,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1074,13 +1138,9 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1099,17 +1159,8 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_YAFFS_FS=m -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1128,7 +1179,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1193,14 +1243,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1208,31 +1263,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1257,6 +1320,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1265,14 +1329,14 @@ CONFIG_ACCESS_CHECK=y CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1304,11 +1368,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1345,6 +1411,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1352,11 +1419,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1366,6 +1435,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index eb3e98b6f3f..ca309cfc6ac 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31.5 -# Mon Nov 2 22:02:56 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y @@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -89,24 +88,23 @@ CONFIG_EPOLL=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 @@ -163,15 +161,15 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set CONFIG_BF548_std=y # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 @@ -185,7 +183,6 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BF54x=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_SPORT0_RX=9 @@ -221,6 +218,8 @@ CONFIG_IRQ_SPI1=10 CONFIG_IRQ_SPI2=10 CONFIG_IRQ_TWI0=11 CONFIG_IRQ_TWI1=11 +CONFIG_BF548=y +CONFIG_BF54x=y CONFIG_BFIN548_EZKIT=y # CONFIG_BFIN548_BLUETECHNIX_CM is not set @@ -387,12 +386,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # @@ -505,6 +506,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -528,7 +530,24 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_BFIN=m +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +# CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m # @@ -663,6 +682,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -711,10 +731,10 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set -# CONFIG_AD525X_DPOT is not set # CONFIG_C2PORT is not set # @@ -767,7 +787,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y +CONFIG_ATA_VERBOSE_ERROR=y +# CONFIG_SATA_PMP is not set CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set @@ -808,6 +829,7 @@ CONFIG_MII=y # CONFIG_ETHOC is not set CONFIG_SMSC911X=y # CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -818,12 +840,10 @@ CONFIG_SMSC911X=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=m @@ -877,10 +897,12 @@ CONFIG_INPUT_EVBUG=m CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set CONFIG_KEYBOARD_BFIN=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set @@ -900,6 +922,7 @@ CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -910,7 +933,6 @@ CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set @@ -976,11 +998,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_OTP=y # CONFIG_BFIN_OTP_WRITE_ENABLE is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -988,6 +1005,7 @@ CONFIG_BFIN_OTP=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1021,9 +1039,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1078,11 +1093,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1116,8 +1135,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1192,6 +1213,7 @@ CONFIG_LOGO=y CONFIG_LOGO_BLACKFIN_CLUT224=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1245,7 +1267,6 @@ CONFIG_SND_SOC_AD1980=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1268,6 +1289,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1422,10 +1444,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set CONFIG_SDH_BFIN=y # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set -# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set -# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1472,6 +1495,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1522,6 +1546,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -1563,7 +1588,6 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -1595,7 +1619,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1680,6 +1703,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1714,12 +1738,14 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y @@ -1730,7 +1756,6 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1766,7 +1791,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1798,11 +1822,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index b9b0f93d0bd..6a776ce75e9 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -114,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBDAF=y +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -1486,19 +1486,10 @@ CONFIG_DEBUG_INFO=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_ENABLE_DEFAULT_TRACERS is not set -# CONFIG_BOOT_TRACER is not set -CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index e3ecdcc3e76..792ff093883 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31.5 -# Mon Nov 2 21:59:31 2009 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y @@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -89,17 +88,15 @@ CONFIG_EPOLL=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # @@ -163,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF537 is not set # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set CONFIG_BF561=y # CONFIG_SMP is not set @@ -180,9 +177,9 @@ CONFIG_BF_REV_MAX=5 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set -# CONFIG_BF_REV_0_3 is not set +CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set -CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_0_5 is not set # CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set @@ -298,7 +295,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y -# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set @@ -353,12 +350,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # @@ -370,9 +369,11 @@ CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set CONFIG_BFIN_EXTMEM_DCACHEABLE=y -CONFIG_BFIN_EXTMEM_WRITEBACK=y -# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set -# CONFIG_BFIN_L2_DCACHEABLE is not set +# CONFIG_BFIN_EXTMEM_WRITEBACK is not set +CONFIG_BFIN_EXTMEM_WRITETHROUGH=y +CONFIG_BFIN_L2_DCACHEABLE=y +# CONFIG_BFIN_L2_WRITEBACK is not set +CONFIG_BFIN_L2_WRITETHROUGH=y # # Memory Protection Unit @@ -472,6 +473,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -613,6 +615,7 @@ CONFIG_MTD_PHYSMAP=m # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -685,6 +688,7 @@ CONFIG_SMC91X=y # CONFIG_ETHOC is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -695,14 +699,10 @@ CONFIG_SMC91X=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -782,11 +782,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -# CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -838,11 +833,15 @@ CONFIG_GPIO_SYSFS=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -865,6 +864,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -884,7 +884,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -923,6 +922,7 @@ CONFIG_HID=m # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -957,7 +957,6 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -989,7 +988,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1064,6 +1062,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1098,26 +1097,24 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VERBOSE=y @@ -1153,7 +1150,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1185,11 +1181,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index bc7fae3d8b8..ed0a7ebeb85 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -834,13 +834,6 @@ CONFIG_SND_VERBOSE_PROCFS=y # # ALSA Blackfin devices # -CONFIG_SND_BLACKFIN_AD1836=m -CONFIG_SND_BLACKFIN_AD1836_TDM=y -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -CONFIG_SND_BLACKFIN_AD1836_MULSUB=y -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_SPORT=0 -CONFIG_SND_BLACKFIN_SPI_PFBIT=4 # CONFIG_SND_BFIN_AD73311 is not set # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 67d12768602..ad58fede1f4 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,21 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28.10 +# Linux kernel version: 2.6.32.2 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -25,16 +31,32 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -58,6 +80,10 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -65,11 +91,14 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -77,11 +106,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -97,7 +123,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -128,15 +153,15 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BF537=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set -# CONFIG_BF542 is not set +# CONFIG_BF542_std is not set # CONFIG_BF542M is not set -# CONFIG_BF544 is not set +# CONFIG_BF544_std is not set # CONFIG_BF544M is not set -# CONFIG_BF547 is not set +# CONFIG_BF547_std is not set # CONFIG_BF547M is not set -# CONFIG_BF548 is not set +# CONFIG_BF548_std is not set # CONFIG_BF548M is not set -# CONFIG_BF549 is not set +# CONFIG_BF549_std is not set # CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=2 @@ -180,7 +205,8 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set +# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set # CONFIG_BFIN537_BLUETECHNIX_TCM is not set CONFIG_PNAV10=y # CONFIG_CAMSIG_MINOTAUR is not set @@ -282,7 +308,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y @@ -291,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set # CONFIG_DMA_UNCACHED_NONE is not set # # Cache Support # CONFIG_BFIN_ICACHE=y -# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_EXTMEM_ICACHEABLE=y CONFIG_BFIN_EXTMEM_DCACHEABLE=y CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set @@ -311,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y # CONFIG_MPU is not set # -# Asynchonous Memory Configuration +# Asynchronous Memory Configuration # # @@ -367,11 +394,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -395,7 +417,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -406,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -419,7 +441,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -430,13 +455,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -455,6 +475,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set @@ -506,6 +527,7 @@ CONFIG_MTD_UCLINUX=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -521,11 +543,6 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_BFIN=y -CONFIG_BFIN_NAND_BASE=0x20100000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=44 CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -533,6 +550,11 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -549,10 +571,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -587,6 +619,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -597,9 +632,12 @@ CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -608,15 +646,16 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -649,14 +688,17 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -665,6 +707,7 @@ CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set @@ -673,7 +716,9 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y -# CONFIG_CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -684,16 +729,13 @@ CONFIG_INPUT_UINPUT=y # # Character devices # -# CONFIG_AD9960 is not set CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_PPI is not set # CONFIG_BFIN_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BFIN_SPI_ADC is not set CONFIG_BFIN_SPORT=y -# CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_BFIN_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_BFIN_JTAG_COMM is not set @@ -707,6 +749,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_DMA=y @@ -719,24 +762,17 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# CAN, the car bus and industrial fieldbus -# -CONFIG_CAN4LINUX=y - -# -# linux embedded drivers -# -CONFIG_CAN_BLACKFIN=m # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -769,14 +805,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set -CONFIG_SENSORS_PCF8574=m -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -792,20 +820,29 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD5252 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -818,11 +855,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -838,17 +877,24 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -858,9 +904,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -875,28 +920,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -928,24 +964,24 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_BFIN_LQ035Q1 is not set CONFIG_FB_BF537_LQ035=y -CONFIG_LQ035_SLAVE_ADDR=0x58 -CONFIG_FB_BFIN_LANDSCAPE=y -# CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_BFIN_7393 is not set # CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y +# CONFIG_BACKLIGHT_ADP8870 is not set # # Display device support @@ -954,6 +990,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set @@ -963,6 +1000,11 @@ CONFIG_SND=m # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -973,7 +1015,6 @@ CONFIG_SND_SPI=y # # ALSA Blackfin devices # -# CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73322 is not set # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=y @@ -993,9 +1034,13 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1031,6 +1076,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1042,6 +1088,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1062,10 +1109,21 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BFIN=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1078,9 +1136,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1090,6 +1152,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1108,13 +1175,9 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1123,17 +1186,8 @@ CONFIG_SYSFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1152,7 +1206,6 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1217,18 +1270,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_DEBUG_VERBOSE=y @@ -1245,6 +1299,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set # CONFIG_ACCESS_CHECK is not set +# CONFIG_BFIN_ISRAM_SELF_TEST is not set # # Security options @@ -1253,14 +1308,14 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1292,11 +1347,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1333,6 +1390,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1340,11 +1398,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1356,3 +1416,4 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig new file mode 100644 index 00000000000..4d31e2a4ed4 --- /dev/null +++ b/arch/blackfin/configs/TCM-BF518_defconfig @@ -0,0 +1,1375 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32.3 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_BUG=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +CONFIG_BF518=y +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set +# CONFIG_BF542_std is not set +# CONFIG_BF542M is not set +# CONFIG_BF544_std is not set +# CONFIG_BF544M is not set +# CONFIG_BF547_std is not set +# CONFIG_BF547M is not set +# CONFIG_BF548_std is not set +# CONFIG_BF548M is not set +# CONFIG_BF549_std is not set +# CONFIG_BF549M is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 +# CONFIG_BF_REV_0_0 is not set +CONFIG_BF_REV_0_1=y +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF51x=y +# CONFIG_BFIN518F_EZBRD is not set +CONFIG_BFIN518F_TCM=y + +# +# BF518 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF518_SPORT0_PORTF is not set +CONFIG_BF518_SPORT0_PORTG=y +CONFIG_BF518_SPORT0_TSCLK_PG10=y +# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set +CONFIG_BF518_UART1_PORTF=y +# CONFIG_BF518_UART1_PORTG is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_DMAR0_BLK=7 +CONFIG_IRQ_DMAR1_BLK=7 +CONFIG_IRQ_DMAR0_OVR=7 +CONFIG_IRQ_DMAR1_OVR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_MAC_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_PTP_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_OPTSEC=11 +CONFIG_IRQ_CNT=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_PORTH_INTA=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_PORTH_INTB=11 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 +CONFIG_IRQ_PORTG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=13 +CONFIG_IRQ_PORTF_INTB=13 +CONFIG_IRQ_SPI0_ERROR=7 +CONFIG_IRQ_SPI1_ERROR=7 +CONFIG_IRQ_RSI_INT0=7 +CONFIG_IRQ_RSI_INT1=7 +CONFIG_IRQ_PWM_TRIP=10 +CONFIG_IRQ_PWM_SYNC=10 +CONFIG_IRQ_PTP_STAT=10 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# +# CONFIG_TICKSOURCE_GPTMR0 is not set +CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_GPTMR0_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BFIN_GPTIMERS=m +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_512K is not set +# CONFIG_DMA_UNCACHED_256K is not set +# CONFIG_DMA_UNCACHED_128K is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set + +# +# Asynchronous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set +CONFIG_BFIN_MAC_USE_HWSTAMP=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_ADF702X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_PCF8574 is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_BFIN_PPI is not set +# CONFIG_BFIN_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BFIN_SPI_ADC is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TWI_LCD is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +CONFIG_BFIN_JTAG_COMM=m +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN_LOCK=y +# CONFIG_SPI_BFIN_SPORT is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=y +# CONFIG_SDH_BFIN is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_SIGMA is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HWERR=y +CONFIG_EXACT_HWERR=y +CONFIG_DEBUG_DOUBLEFAULT=y +CONFIG_DEBUG_DOUBLEFAULT_PRINT=y +# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set +# CONFIG_DEBUG_ICACHE_CHECK is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y +# CONFIG_BFIN_ISRAM_SELF_TEST is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h index 57bc21ac229..836895156b5 100644 --- a/arch/blackfin/include/asm/bfin-lq035q1.h +++ b/arch/blackfin/include/asm/bfin-lq035q1.h @@ -8,6 +8,9 @@ #ifndef BFIN_LQ035Q1_H #define BFIN_LQ035Q1_H +/* + * LCD Modes + */ #define LQ035_RL (0 << 8) /* Right -> Left Scan */ #define LQ035_LR (1 << 8) /* Left -> Right Scan */ #define LQ035_TB (1 << 9) /* Top -> Botton Scan */ @@ -17,9 +20,18 @@ #define LQ035_NORM (1 << 13) /* Reversal */ #define LQ035_REV (0 << 13) /* Reversal */ +/* + * PPI Modes + */ + +#define USE_RGB565_16_BIT_PPI 1 +#define USE_RGB565_8_BIT_PPI 2 +#define USE_RGB888_8_BIT_PPI 3 + struct bfin_lq035q1fb_disp_info { unsigned mode; + unsigned ppi_mode; /* GPIOs */ int use_bl; unsigned gpio_bl; diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h new file mode 100644 index 00000000000..eec0076a385 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_can.h @@ -0,0 +1,725 @@ +/* + * bfin_can.h - interface to Blackfin CANs + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BFIN_CAN_H__ +#define __ASM_BFIN_CAN_H__ + +/* + * transmit and receive channels + */ +#define TRANSMIT_CHL 24 +#define RECEIVE_STD_CHL 0 +#define RECEIVE_EXT_CHL 4 +#define RECEIVE_RTR_CHL 8 +#define RECEIVE_EXT_RTR_CHL 12 +#define MAX_CHL_NUMBER 32 + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m + +/* + * bfin can registers layout + */ +struct bfin_can_mask_regs { + __BFP(aml); + __BFP(amh); +}; + +struct bfin_can_channel_regs { + u16 data[8]; + __BFP(dlc); + __BFP(tsv); + __BFP(id0); + __BFP(id1); +}; + +struct bfin_can_regs { + /* + * global control and status registers + */ + __BFP(mc1); /* offset 0x00 */ + __BFP(md1); /* offset 0x04 */ + __BFP(trs1); /* offset 0x08 */ + __BFP(trr1); /* offset 0x0c */ + __BFP(ta1); /* offset 0x10 */ + __BFP(aa1); /* offset 0x14 */ + __BFP(rmp1); /* offset 0x18 */ + __BFP(rml1); /* offset 0x1c */ + __BFP(mbtif1); /* offset 0x20 */ + __BFP(mbrif1); /* offset 0x24 */ + __BFP(mbim1); /* offset 0x28 */ + __BFP(rfh1); /* offset 0x2c */ + __BFP(opss1); /* offset 0x30 */ + u32 __pad1[3]; + __BFP(mc2); /* offset 0x40 */ + __BFP(md2); /* offset 0x44 */ + __BFP(trs2); /* offset 0x48 */ + __BFP(trr2); /* offset 0x4c */ + __BFP(ta2); /* offset 0x50 */ + __BFP(aa2); /* offset 0x54 */ + __BFP(rmp2); /* offset 0x58 */ + __BFP(rml2); /* offset 0x5c */ + __BFP(mbtif2); /* offset 0x60 */ + __BFP(mbrif2); /* offset 0x64 */ + __BFP(mbim2); /* offset 0x68 */ + __BFP(rfh2); /* offset 0x6c */ + __BFP(opss2); /* offset 0x70 */ + u32 __pad2[3]; + __BFP(clock); /* offset 0x80 */ + __BFP(timing); /* offset 0x84 */ + __BFP(debug); /* offset 0x88 */ + __BFP(status); /* offset 0x8c */ + __BFP(cec); /* offset 0x90 */ + __BFP(gis); /* offset 0x94 */ + __BFP(gim); /* offset 0x98 */ + __BFP(gif); /* offset 0x9c */ + __BFP(control); /* offset 0xa0 */ + __BFP(intr); /* offset 0xa4 */ + u32 __pad3[1]; + __BFP(mbtd); /* offset 0xac */ + __BFP(ewr); /* offset 0xb0 */ + __BFP(esr); /* offset 0xb4 */ + u32 __pad4[2]; + __BFP(ucreg); /* offset 0xc0 */ + __BFP(uccnt); /* offset 0xc4 */ + __BFP(ucrc); /* offset 0xc8 */ + __BFP(uccnf); /* offset 0xcc */ + u32 __pad5[12]; + + /* + * channel(mailbox) mask and message registers + */ + struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */ + struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */ +}; + +#undef __BFP + +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +#endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index b558908e1c7..9626cf7e425 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -1,7 +1,7 @@ /* - * bfin_sport.h - userspace header for bfin sport driver + * bfin_sport.h - interface to Blackfin SPORTs * - * Copyright 2004-2008 Analog Devices Inc. + * Copyright 2004-2009 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -9,16 +9,6 @@ #ifndef __BFIN_SPORT_H__ #define __BFIN_SPORT_H__ -#ifdef __KERNEL__ -#include <linux/cdev.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#include <linux/wait.h> -#endif - -#define SPORT_MAJOR 237 -#define SPORT_NR_DEVS 2 - /* Sport mode: it can be set to TDM, i2s or others */ #define NORM_MODE 0x0 #define TDM_MODE 0x1 @@ -35,7 +25,7 @@ struct sport_config { unsigned int mode:3; /* if TDM mode is selected, channels must be set */ - int channels; /* Must be in 8 units */ + int channels; /* Must be in 8 units */ unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ /* I2S mode */ @@ -69,94 +59,137 @@ struct sport_config { #ifdef __KERNEL__ -struct sport_register { - unsigned short tcr1; - unsigned short reserved0; - unsigned short tcr2; - unsigned short reserved1; - unsigned short tclkdiv; - unsigned short reserved2; - unsigned short tfsdiv; - unsigned short reserved3; - unsigned long tx; - unsigned long reserved_l0; - unsigned long rx; - unsigned long reserved_l1; - unsigned short rcr1; - unsigned short reserved4; - unsigned short rcr2; - unsigned short reserved5; - unsigned short rclkdiv; - unsigned short reserved6; - unsigned short rfsdiv; - unsigned short reserved7; - unsigned short stat; - unsigned short reserved8; - unsigned short chnl; - unsigned short reserved9; - unsigned short mcmc1; - unsigned short reserved10; - unsigned short mcmc2; - unsigned short reserved11; - unsigned long mtcs0; - unsigned long mtcs1; - unsigned long mtcs2; - unsigned long mtcs3; - unsigned long mrcs0; - unsigned long mrcs1; - unsigned long mrcs2; - unsigned long mrcs3; -}; - -struct sport_dev { - struct cdev cdev; /* Char device structure */ - - int sport_num; +#include <linux/types.h> - int dma_rx_chan; - int dma_tx_chan; - - int rx_irq; - unsigned char *rx_buf; /* Buffer store the received data */ - int rx_len; /* How many bytes will be received */ - int rx_received; /* How many bytes has been received */ - - int tx_irq; - const unsigned char *tx_buf; - int tx_len; - int tx_sent; - - int err_irq; - - struct mutex mutex; /* mutual exclusion semaphore */ - struct task_struct *task; - - wait_queue_head_t waitq; - int wait_con; - struct sport_register *regs; - struct sport_config config; +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct sport_register { + __BFP(tcr1); + __BFP(tcr2); + __BFP(tclkdiv); + __BFP(tfsdiv); + union { + u32 tx32; + u16 tx16; + }; + u32 __pad_tx; + union { + u32 rx32; /* use the anomaly wrapper below */ + u16 rx16; + }; + u32 __pad_rx; + __BFP(rcr1); + __BFP(rcr2); + __BFP(rclkdiv); + __BFP(rfsdiv); + __BFP(stat); + __BFP(chnl); + __BFP(mcmc1); + __BFP(mcmc2); + u32 mtcs0; + u32 mtcs1; + u32 mtcs2; + u32 mtcs3; + u32 mrcs0; + u32 mrcs1; + u32 mrcs2; + u32 mrcs3; }; +#undef __BFP + +#define bfin_read_sport_rx32(base) \ +({ \ + struct sport_register *__mmrs = (void *)base; \ + u32 __ret; \ + unsigned long flags; \ + if (ANOMALY_05000473) \ + local_irq_save(flags); \ + __ret = __mmrs->rx32; \ + if (ANOMALY_05000473) \ + local_irq_restore(flags); \ + __ret; \ +}) #endif -#define SPORT_TCR1 0 -#define SPORT_TCR2 1 -#define SPORT_TCLKDIV 2 -#define SPORT_TFSDIV 3 -#define SPORT_RCR1 8 -#define SPORT_RCR2 9 -#define SPORT_RCLKDIV 10 -#define SPORT_RFSDIV 11 -#define SPORT_CHANNEL 13 -#define SPORT_MCMC1 14 -#define SPORT_MCMC2 15 -#define SPORT_MTCS0 16 -#define SPORT_MTCS1 17 -#define SPORT_MTCS2 18 -#define SPORT_MTCS3 19 -#define SPORT_MRCS0 20 -#define SPORT_MRCS1 21 -#define SPORT_MRCS2 22 -#define SPORT_MRCS3 23 +/* Workaround defBF*.h SPORT MMRs till they get cleansed */ +#undef DTYPE_NORM +#undef SLEN +#undef SP_WOFF +#undef SP_WSIZE + +/* SPORT_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORT_TCR2 Masks */ +#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ +#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) +#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORT_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +/* DTYPE_* defined above */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORT_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORT_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORT_MCMC1 Masks */ +#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ +#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) +#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) +#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ +#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) +#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) + +/* SPORT_MCMC2 Masks */ +#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0xF000 /* Multichannel Frame Delay */ +#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) +#define EX_MFD(x) BFIN_EXTRACT(MFD, x) #endif diff --git a/arch/blackfin/include/asm/bfin_watchdog.h b/arch/blackfin/include/asm/bfin_watchdog.h new file mode 100644 index 00000000000..dce09829a09 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_watchdog.h @@ -0,0 +1,30 @@ +/* + * bfin_watchdog.h - Blackfin watchdog definitions + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_WATCHDOG_H +#define _BFIN_WATCHDOG_H + +/* Bit in SWRST that indicates boot caused by watchdog */ +#define SWRST_RESET_WDOG 0x4000 + +/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */ +#define WDOG_EXPIRED 0x8000 + +/* Masks for WDEV field in WDOG_CTL register */ +#define ICTL_RESET 0x0 +#define ICTL_NMI 0x2 +#define ICTL_GPI 0x4 +#define ICTL_NONE 0x6 +#define ICTL_MASK 0x6 + +/* Masks for WDEN field in WDOG_CTL register */ +#define WDEN_MASK 0x0FF0 +#define WDEN_ENABLE 0x0000 +#define WDEN_DISABLE 0x0AD0 + +#endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index a2ff3fb3568..605ba8e9b2e 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -7,22 +7,41 @@ #ifndef _BLACKFIN_BITOPS_H #define _BLACKFIN_BITOPS_H -#ifndef CONFIG_SMP -# include <asm-generic/bitops.h> -#else +#include <linux/compiler.h> + +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/find.h> #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly #endif -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/__ffs.h> #include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#ifndef CONFIG_SMP +#include <linux/irqflags.h> + +/* + * clear_bit may not imply a memory barrier + */ +#ifndef smp_mb__before_clear_bit +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() +#endif +#include <asm-generic/bitops/atomic.h> +#include <asm-generic/bitops/non-atomic.h> +#else +#include <asm/byteorder.h> /* swab32 */ #include <linux/linkage.h> asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr); @@ -89,19 +108,36 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) #include <asm-generic/bitops/non-atomic.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> +#endif /* CONFIG_SMP */ -#include <asm-generic/bitops/ext2-atomic.h> -#include <asm-generic/bitops/ext2-non-atomic.h> +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ -#include <asm-generic/bitops/minix.h> +static inline unsigned int hweight32(unsigned int w) +{ + unsigned int res; -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> + __asm__ ("%0.l = ONES %0;" + "%0 = %0.l (Z);" + : "=d" (res) : "d" (w)); + return res; +} -#endif /* CONFIG_SMP */ +static inline unsigned int hweight64(__u64 w) +{ + return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w); +} + +static inline unsigned int hweight16(unsigned int w) +{ + return hweight32(w & 0xffff); +} + +static inline unsigned int hweight8(unsigned int w) +{ + return hweight32(w & 0xff); +} #endif /* _BLACKFIN_BITOPS_H */ diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 5dffaf582a2..1f9060395a0 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -73,6 +73,11 @@ #else cli r0; #endif +#ifdef CONFIG_TRACE_IRQFLAGS + sp += -12; + call _trace_hardirqs_off; + sp += 12; +#endif [--sp] = RETI; /*orig_pc*/ /* Clear all L registers. */ r0 = 0 (x); @@ -279,6 +284,13 @@ RETN = [sp++]; RETX = [sp++]; RETI = [sp++]; + +#ifdef CONFIG_TRACE_IRQFLAGS + sp += -12; + call _trace_hardirqs_on; + sp += 12; +#endif + RETS = [sp++]; #ifdef CONFIG_SMP @@ -374,3 +386,13 @@ (R7:0, P5:0) = [SP++]; .endm + +.macro pseudo_long_call func:req, scratch:req +#ifdef CONFIG_ROMKERNEL + \scratch\().l = \func; + \scratch\().h = \func; + call (\scratch); +#else + call \func; +#endif +.endm diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index b191dc662bd..16883e582e3 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -17,8 +17,6 @@ struct blackfin_cpudata { struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; - unsigned long dcache_invld_count; - unsigned long icache_invld_count; }; DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data); diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 25906468622..f342ff0319d 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -12,6 +12,8 @@ #include <mach/anomaly.h> #define MK_BMSK_(x) (1<<x) +#define BFIN_DEPOSIT(mask, x) (((x) << __ffs(mask)) & (mask)) +#define BFIN_EXTRACT(mask, x) (((x) & (mask)) >> __ffs(mask)) #ifndef __ASSEMBLY__ @@ -23,62 +25,30 @@ # define NOP_PAD_ANOMALY_05000198 #endif -#define bfin_read8(addr) ({ \ - uint32_t __v; \ +#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \ + u32 __v; \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "%0 = b[%1] (z);" \ + "%0 = " #asm_size "[%1]" #asm_ext ";" \ : "=d" (__v) \ : "a" (addr) \ ); \ __v; }) - -#define bfin_read16(addr) ({ \ - uint32_t __v; \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "%0 = w[%1] (z);" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_read32(addr) ({ \ - uint32_t __v; \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "%0 = [%1];" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_write8(addr, val) \ +#define _bfin_writeX(addr, val, size, asm_size) \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "b[%0] = %1;" \ + #asm_size "[%0] = %1;" \ : \ - : "a" (addr), "d" ((uint8_t)(val)) \ + : "a" (addr), "d" ((u##size)(val)) \ : "memory" \ ) -#define bfin_write16(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "w[%0] = %1;" \ - : \ - : "a" (addr), "d" ((uint16_t)(val)) \ - : "memory" \ - ) - -#define bfin_write32(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "[%0] = %1;" \ - : \ - : "a" (addr), "d" (val) \ - : "memory" \ - ) +#define bfin_read8(addr) _bfin_readX(addr, 8, b, (z)) +#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z)) +#define bfin_read32(addr) _bfin_readX(addr, 32, , ) +#define bfin_write8(addr, val) _bfin_writeX(addr, val, 8, b) +#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w) +#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, ) #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index c31f91cc1d5..171d8deb04a 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -30,10 +30,22 @@ __asm__ __volatile__ ( #define HZSCALE (268435456 / (1000000/HZ)) -static inline void udelay(unsigned long usecs) +static inline unsigned long __to_delay(unsigned long scale) { extern unsigned long loops_per_jiffy; - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); + return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6; +} + +static inline void udelay(unsigned long usecs) +{ + __delay(__to_delay(usecs)); } +static inline void ndelay(unsigned long nsecs) +{ + __delay(__to_delay(1) * nsecs / 1000); +} + +#define ndelay ndelay + #endif diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index 413a30314a6..212cb80fd74 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -44,13 +44,8 @@ dma_mapping_error(struct device *dev, dma_addr_t dma_addr) extern void __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir); static inline void -_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir) { - if (!__builtin_constant_p(dir)) { - __dma_sync(addr, size, dir); - return; - } - switch (dir) { case DMA_NONE: BUG(); @@ -64,6 +59,14 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) break; } } +static inline void +_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ + if (__builtin_constant_p(dir)) + __dma_sync_inline(addr, size, dir); + else + __dma_sync(addr, size, dir); +} static inline dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index bd2e62243ab..2c09b1d50ec 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -262,6 +262,10 @@ static inline void dma_disable_irq(unsigned int channel) { disable_irq(dma_ch[channel].irq); } +static inline void dma_disable_irq_nosync(unsigned int channel) +{ + disable_irq_nosync(dma_ch[channel].irq); +} static inline void dma_enable_irq(unsigned int channel) { enable_irq(dma_ch[channel].irq); diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index 1597ae5041e..efcc3aebeae 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -75,7 +75,7 @@ #define VLEV 0x00F0 /* Internal Voltage Level */ #ifdef __ADSPBF52x__ -#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ #define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ #define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ #define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ @@ -84,7 +84,7 @@ #define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ #define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ #else -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ #define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ #define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ #define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 5b50f0ecacf..117713adea7 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -22,12 +22,15 @@ #define EF_BFIN_CODE_IN_L2 0x00000040 /* --code-in-l2 */ #define EF_BFIN_DATA_IN_L2 0x00000080 /* --data-in-l2 */ +#if 1 /* core dumps not supported, but linux/elfcore.h needs these */ typedef unsigned long elf_greg_t; -#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */ +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct { } elf_fpregset_t; +#endif + /* * This is used to ensure we don't load something for the wrong architecture. */ @@ -55,6 +58,9 @@ do { \ _regs->p2 = _dynamic_addr; \ } while(0) +#if 0 +#define CORE_DUMP_USE_REGSET +#endif #define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 90c9b400ba6..4cfe2d9ba7e 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -10,4 +10,57 @@ #define MCOUNT_INSN_SIZE 6 /* sizeof "[++sp] = rets; call __mcount;" */ +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_FRAME_POINTER +#include <linux/mm.h> + +extern inline void *return_address(unsigned int level) +{ + unsigned long *endstack, *fp, *ret_addr; + unsigned int current_level = 0; + + if (level == 0) + return __builtin_return_address(0); + + fp = (unsigned long *)__builtin_frame_address(0); + endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level); + + while (((unsigned long)fp & 0x3) == 0 && fp && + (fp + 1) < endstack && current_level < level) { + fp = (unsigned long *)*fp; + current_level++; + } + + if (((unsigned long)fp & 0x3) == 0 && fp && + (fp + 1) < endstack) + ret_addr = (unsigned long *)*(fp + 1); + else + ret_addr = NULL; + + return ret_addr; +} + +#else + +extern inline void *return_address(unsigned int level) +{ + return NULL; +} + +#endif /* CONFIG_FRAME_POINTER */ + +#define HAVE_ARCH_CALLER_ADDR + +/* inline function or macro may lead to unexpected result */ +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 ((unsigned long)return_address(1)) +#define CALLER_ADDR2 ((unsigned long)return_address(2)) +#define CALLER_ADDR3 ((unsigned long)return_address(3)) +#define CALLER_ADDR4 ((unsigned long)return_address(4)) +#define CALLER_ADDR5 ((unsigned long)return_address(5)) +#define CALLER_ADDR6 ((unsigned long)return_address(6)) + +#endif /* __ASSEMBLY__ */ + #endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 539468a0505..91bd2d7b9d5 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -70,6 +70,8 @@ #ifndef __ASSEMBLY__ +#include <linux/compiler.h> + /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -223,6 +225,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); +#include <asm/irq.h> +#include <asm/errno.h> + #ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ @@ -247,6 +252,11 @@ static inline int gpio_cansleep(unsigned int gpio) return __gpio_cansleep(gpio); } +static inline int gpio_to_irq(unsigned gpio) +{ + return __gpio_to_irq(gpio); +} + #else /* !CONFIG_GPIOLIB */ static inline int gpio_request(unsigned gpio, const char *label) @@ -279,10 +289,6 @@ static inline void gpio_set_value(unsigned gpio, int value) return bfin_gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ -#endif /* !CONFIG_GPIOLIB */ -#include <asm/irq.h> - static inline int gpio_to_irq(unsigned gpio) { if (likely(gpio < MAX_BLACKFIN_GPIOS)) @@ -291,6 +297,9 @@ static inline int gpio_to_irq(unsigned gpio) return -EINVAL; } +#include <asm-generic/gpio.h> /* cansleep wrappers */ +#endif /* !CONFIG_GPIOLIB */ + static inline int irq_to_gpio(unsigned irq) { return (irq - GPIO_IRQ_BASE); diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index e7c0623f909..12f4060a31b 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -12,6 +12,9 @@ #include <linux/irqflags.h> +/* IRQs that may be used by external irq_chip controllers */ +#define NR_SPARE_IRQS 32 + #include <mach/anomaly.h> /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ @@ -35,4 +38,8 @@ #include <asm-generic/irq.h> +#ifdef CONFIG_NMI_WATCHDOG +# define ARCH_HAS_NMI_WATCHDOG +#endif + #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index ae8ef4ffd80..e1a9b4624f9 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -7,12 +7,13 @@ #ifndef __BLACKFIN_MMU_CONTEXT_H__ #define __BLACKFIN_MMU_CONTEXT_H__ -#include <linux/gfp.h> +#include <linux/slab.h> #include <linux/sched.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/cplbinit.h> +#include <asm/sections.h> /* Note: L1 stacks are CPU-private things, so we bluntly disable this feature in SMP mode, and use the per-CPU scratch SRAM bank only to @@ -117,9 +118,16 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr, unsigned long flags) { unsigned long *mask = mm->context.page_rwx_mask; - unsigned long page = addr >> 12; - unsigned long idx = page >> 5; - unsigned long bit = 1 << (page & 31); + unsigned long page; + unsigned long idx; + unsigned long bit; + + if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)) + page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12; + else + page = addr >> 12; + idx = page >> 5; + bit = 1 << (page & 31); if (flags & VM_READ) mask[idx] |= bit; diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h new file mode 100644 index 00000000000..b9caac4fcfd --- /dev/null +++ b/arch/blackfin/include/asm/nmi.h @@ -0,0 +1,12 @@ +/* + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#ifndef _BFIN_NMI_H_ +#define _BFIN_NMI_H_ + +#include <linux/nmi.h> + +#endif diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 1d04e407834..d0ce975bcd4 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -15,4 +15,7 @@ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#include <asm-generic/memory_model.h> +#include <asm-generic/getorder.h> + #endif diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index b33a4488f49..aaa1c6c2bc1 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -24,6 +24,8 @@ #ifndef __ASSEMBLY__ +struct task_struct; + /* this struct defines the way the registers are stored on the stack during a system call. */ @@ -101,9 +103,30 @@ struct pt_regs { master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) #define instruction_pointer(regs) ((regs)->pc) +#define user_stack_pointer(regs) ((regs)->usp) #define profile_pc(regs) instruction_pointer(regs) extern void show_regs(struct pt_regs *); +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *child); +extern void user_disable_single_step(struct task_struct *child); +/* common code demands this function */ +#define ptrace_disable(child) user_disable_single_step(child) + +/* + * Get the address of the live pt_regs for the specified task. + * These are saved onto the top kernel stack when the process + * is not running. + * + * Note: if a user thread is execve'd from kernel space, the + * kernel stack will not be empty on entry to the kernel, so + * ptracing these tasks will fail. + */ +#define task_pt_regs(task) \ + (struct pt_regs *) \ + ((unsigned long)task_stack_page(task) + \ + (THREAD_SIZE - sizeof(struct pt_regs))) + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ @@ -173,4 +196,6 @@ extern void show_regs(struct pt_regs *); #define PT_FDPIC_EXEC 232 #define PT_FDPIC_INTERP 236 +#define PT_LAST_PSEUDO PT_FDPIC_INTERP + #endif /* _BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index 42f6c53c59c..14a3e66d916 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -21,6 +21,9 @@ extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[]; extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[], _data_l1_lma[], __weak _data_l1_len[]; +#ifdef CONFIG_ROMKERNEL +extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[]; +#endif extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], _data_b_l1_lma[], __weak _data_b_l1_len[]; extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index 6a0fe94b84a..f5b53796711 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -22,8 +22,23 @@ extern char coreb_trampoline_start, coreb_trampoline_end; struct corelock_slot { int lock; }; +extern struct corelock_slot corelock; + +#ifdef __ARCH_SYNC_CORE_ICACHE +extern unsigned long icache_invld_count[NR_CPUS]; +#endif +#ifdef __ARCH_SYNC_CORE_DCACHE +extern unsigned long dcache_invld_count[NR_CPUS]; +#endif void smp_icache_flush_range_others(unsigned long start, unsigned long end); +#ifdef CONFIG_HOTPLUG_CPU +void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); +void cpu_die(void); +void platform_cpu_die(void); +int __cpu_disable(void); +int __cpu_die(unsigned int cpu); +#endif #endif /* !__ASM_BLACKFIN_SMP_H */ diff --git a/arch/blackfin/include/asm/syscall.h b/arch/blackfin/include/asm/syscall.h new file mode 100644 index 00000000000..4921a4815cc --- /dev/null +++ b/arch/blackfin/include/asm/syscall.h @@ -0,0 +1,96 @@ +/* + * Magic syscall break down functions + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BLACKFIN_SYSCALL_H__ +#define __ASM_BLACKFIN_SYSCALL_H__ + +/* + * Blackfin syscalls are simple: + * enter: + * p0: syscall number + * r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5 + * exit: + * r0: return/error value + */ + +#include <linux/err.h> +#include <linux/sched.h> +#include <asm/ptrace.h> + +static inline long +syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + return regs->p0; +} + +static inline void +syscall_rollback(struct task_struct *task, struct pt_regs *regs) +{ + regs->p0 = regs->orig_p0; +} + +static inline long +syscall_get_error(struct task_struct *task, struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0; +} + +static inline long +syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) +{ + return regs->r0; +} + +static inline void +syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, + int error, long val) +{ + regs->r0 = error ? -error : val; +} + +/** + * syscall_get_arguments() + * @task: unused + * @regs: the register layout to extract syscall arguments from + * @i: first syscall argument to extract + * @n: number of syscall arguments to extract + * @args: array to return the syscall arguments in + * + * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument + */ +static inline void +syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, unsigned long *args) +{ + /* + * Assume the ptrace layout doesn't change -- r5 is first in memory, + * then r4, ..., then r0. So we simply reverse the ptrace register + * array in memory to store into the args array. + */ + long *aregs = ®s->r0 - i; + + BUG_ON(i > 5 || i + n > 6); + + while (n--) + *args++ = *aregs--; +} + +/* See syscall_get_arguments() comments */ +static inline void +syscall_set_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, const unsigned long *args) +{ + long *aregs = ®s->r0 - i; + + BUG_ON(i > 5 || i + n > 6); + + while (n--) + *aregs-- = *args++; +} + +#endif diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index a40d9368c38..e9a5614cdbb 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -17,7 +17,7 @@ /* Thread Align Mask to reach to the top of the stack * for any process */ -#define ALIGN_PAGE_MASK 0xffffe000 +#define ALIGN_PAGE_MASK 0xffffe000 /* * Size of kernel stack for each process. This must be a power of 2... @@ -57,7 +57,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ @@ -73,8 +73,7 @@ __attribute_const__ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; - __asm__("%0 = sp;" : "=da"(ti) : - ); + __asm__("%0 = sp;" : "=da"(ti)); return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1)); } @@ -99,21 +98,23 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_FREEZE 6 /* is freezing for suspend */ -#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ -#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ +#define TIF_FREEZE 6 /* is freezing for suspend */ +#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ +#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ +#define TIF_SINGLESTEP 9 /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) -#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) +#define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h index 589e937ed1e..9ca7db844d1 100644 --- a/arch/blackfin/include/asm/time.h +++ b/arch/blackfin/include/asm/time.h @@ -23,9 +23,7 @@ */ #ifndef CONFIG_CPU_FREQ -#define TIME_SCALE 1 -#define __bfin_cycles_off (0) -#define __bfin_cycles_mod (0) +# define TIME_SCALE 1 #else /* * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . @@ -33,9 +31,16 @@ * adjust the Core Timer Presale Register. This way we don't lose time. */ #define TIME_SCALE 4 + +# ifdef CONFIG_CYCLES_CLOCKSOURCE extern unsigned long long __bfin_cycles_off; extern unsigned int __bfin_cycles_mod; +# endif +#endif + +#if defined(CONFIG_TICKSOURCE_CORETMR) +extern void bfin_coretmr_init(void); +extern void bfin_coretmr_clockevent_init(void); #endif -extern void __init setup_core_timer(void); #endif diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index a8ddbc8ed5a..346a421f156 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o +obj-$(CONFIG_NMI_WATCHDOG) += nmi.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK) += shadow_console.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 924c00286ba..26403d1c9e6 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -91,7 +91,7 @@ late_initcall(proc_dma_init); */ int request_dma(unsigned int channel, const char *device_id) { - pr_debug("request_dma() : BEGIN \n"); + pr_debug("request_dma() : BEGIN\n"); if (device_id == NULL) printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel); @@ -107,7 +107,7 @@ int request_dma(unsigned int channel, const char *device_id) #endif if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) { - pr_debug("DMA CHANNEL IN USE \n"); + pr_debug("DMA CHANNEL IN USE\n"); return -EBUSY; } @@ -131,7 +131,7 @@ int request_dma(unsigned int channel, const char *device_id) * you have to request DMA, before doing any operations on * descriptor/channel */ - pr_debug("request_dma() : END \n"); + pr_debug("request_dma() : END\n"); return 0; } EXPORT_SYMBOL(request_dma); @@ -171,7 +171,7 @@ static void clear_dma_buffer(unsigned int channel) void free_dma(unsigned int channel) { - pr_debug("freedma() : BEGIN \n"); + pr_debug("freedma() : BEGIN\n"); BUG_ON(channel >= MAX_DMA_CHANNELS || !atomic_read(&dma_ch[channel].chan_status)); @@ -185,7 +185,7 @@ void free_dma(unsigned int channel) /* Clear the DMA Variable in the Channel */ atomic_set(&dma_ch[channel].chan_status, 0); - pr_debug("freedma() : END \n"); + pr_debug("freedma() : END\n"); } EXPORT_SYMBOL(free_dma); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index a174596cc00..e35e20f00d9 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1289,44 +1289,50 @@ __initcall(gpio_register_proc); #endif #ifdef CONFIG_GPIOLIB -int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) +static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) { return bfin_gpio_direction_input(gpio); } -int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) +static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) { return bfin_gpio_direction_output(gpio, level); } -int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) +static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) { return bfin_gpio_get_value(gpio); } -void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) +static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) { return bfin_gpio_set_value(gpio, value); } -int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) +static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) { return bfin_gpio_request(gpio, chip->label); } -void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) +static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) { return bfin_gpio_free(gpio); } +static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + return gpio + GPIO_IRQ_BASE; +} + static struct gpio_chip bfin_chip = { - .label = "Blackfin-GPIOlib", + .label = "BFIN-GPIO", .direction_input = bfin_gpiolib_direction_input, .get = bfin_gpiolib_get_value, .direction_output = bfin_gpiolib_direction_output, .set = bfin_gpiolib_set_value, .request = bfin_gpiolib_gpio_request, .free = bfin_gpiolib_gpio_free, + .to_irq = bfin_gpiolib_gpio_to_irq, .base = 0, .ngpio = MAX_BLACKFIN_GPIOS, }; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 8d42b9e50df..30fd6417f06 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -64,6 +64,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); } +#ifdef CONFIG_ROMKERNEL + /* Cover kernel XIP flash area */ + addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1); + dcplb_tbl[cpu][i_d].addr = addr; + dcplb_tbl[cpu][i_d++].data = d_data | CPLB_USER_RD; + icplb_tbl[cpu][i_i].addr = addr; + icplb_tbl[cpu][i_i++].data = i_data | CPLB_USER_RD; +#endif + /* Cover L1 memory. One 4M area for code and data each is enough. */ #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 930c01c0681..87b25b1b30e 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -31,6 +31,12 @@ int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS]; int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS]; int nr_cplb_flush[NR_CPUS]; +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +#define MGR_ATTR __attribute__((l1_text)) +#else +#define MGR_ATTR +#endif + /* * Given the contents of the status register, return the index of the * CPLB that caused the fault. @@ -59,7 +65,7 @@ static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS]; /* * Find an ICPLB entry to be evicted and return its index. */ -static int evict_one_icplb(unsigned int cpu) +MGR_ATTR static int evict_one_icplb(unsigned int cpu) { int i; for (i = first_switched_icplb; i < MAX_CPLBS; i++) @@ -74,7 +80,7 @@ static int evict_one_icplb(unsigned int cpu) return i; } -static int evict_one_dcplb(unsigned int cpu) +MGR_ATTR static int evict_one_dcplb(unsigned int cpu) { int i; for (i = first_switched_dcplb; i < MAX_CPLBS; i++) @@ -89,7 +95,7 @@ static int evict_one_dcplb(unsigned int cpu) return i; } -static noinline int dcplb_miss(unsigned int cpu) +MGR_ATTR static noinline int dcplb_miss(unsigned int cpu) { unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); @@ -114,10 +120,15 @@ static noinline int dcplb_miss(unsigned int cpu) d_data = L2_DMEMORY; } else if (addr >= physical_mem_end) { if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { - addr &= ~(4 * 1024 * 1024 - 1); - d_data &= ~PAGE_SIZE_4KB; - d_data |= PAGE_SIZE_4MB; - d_data |= CPLB_USER_RD | CPLB_USER_WR; + mask = current_rwx_mask[cpu]; + if (mask) { + int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT; + int idx = page >> 5; + int bit = 1 << (page & 31); + + if (mask[idx] & bit) + d_data |= CPLB_USER_RD; + } } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { addr &= ~(1 * 1024 * 1024 - 1); @@ -126,7 +137,9 @@ static noinline int dcplb_miss(unsigned int cpu) } else return CPLB_PROT_VIOL; } else if (addr >= _ramend) { - d_data |= CPLB_USER_RD | CPLB_USER_WR; + d_data |= CPLB_USER_RD | CPLB_USER_WR; + if (reserved_mem_dcache_on) + d_data |= CPLB_L1_CHBL; } else { mask = current_rwx_mask[cpu]; if (mask) { @@ -156,7 +169,7 @@ static noinline int dcplb_miss(unsigned int cpu) return 0; } -static noinline int icplb_miss(unsigned int cpu) +MGR_ATTR static noinline int icplb_miss(unsigned int cpu) { unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); int status = bfin_read_ICPLB_STATUS(); @@ -204,10 +217,19 @@ static noinline int icplb_miss(unsigned int cpu) i_data = L2_IMEMORY; } else if (addr >= physical_mem_end) { if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { - addr &= ~(4 * 1024 * 1024 - 1); - i_data &= ~PAGE_SIZE_4KB; - i_data |= PAGE_SIZE_4MB; - i_data |= CPLB_USER_RD; + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask[cpu]; + + if (mask) { + int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT; + int idx = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[idx] & bit) + i_data |= CPLB_USER_RD; + } + } } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & FAULT_USERSUPV)) { addr &= ~(1 * 1024 * 1024 - 1); @@ -217,6 +239,8 @@ static noinline int icplb_miss(unsigned int cpu) return CPLB_PROT_VIOL; } else if (addr >= _ramend) { i_data |= CPLB_USER_RD; + if (reserved_mem_icache_on) + i_data |= CPLB_L1_CHBL; } else { /* * Two cases to distinguish - a supervisor access must @@ -251,7 +275,7 @@ static noinline int icplb_miss(unsigned int cpu) return 0; } -static noinline int dcplb_protection_fault(unsigned int cpu) +MGR_ATTR static noinline int dcplb_protection_fault(unsigned int cpu) { int status = bfin_read_DCPLB_STATUS(); @@ -271,7 +295,7 @@ static noinline int dcplb_protection_fault(unsigned int cpu) return CPLB_PROT_VIOL; } -int cplb_hdr(int seqstat, struct pt_regs *regs) +MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs) { int cause = seqstat & 0x3f; unsigned int cpu = raw_smp_processor_id(); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 282a7919821..bfe75af4e8b 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -56,6 +56,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; } +#ifdef CONFIG_ROMKERNEL + /* Cover kernel XIP flash area */ + addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1); + d_tbl[i_d].addr = addr; + d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; + i_tbl[i_i].addr = addr; + i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; +#endif + /* Cover L1 memory. One 4M area for code and data each is enough. */ if (cpu == 0) { if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index e937f323d82..04ddcfeb798 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -116,7 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent); void __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir) { - _dma_sync(addr, size, dir); + __dma_sync_inline(addr, size, dir); } EXPORT_SYMBOL(__dma_sync); diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index f27dc2292e1..686478f5f66 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -44,7 +44,7 @@ ENTRY(_ret_from_fork) sti r4; #endif /* CONFIG_IPIPE */ SP += -12; - call _schedule_tail; + pseudo_long_call _schedule_tail, p5; SP += 12; r0 = [sp + PT_IPEND]; cc = bittst(r0,1); @@ -79,7 +79,7 @@ ENTRY(_sys_vfork) r0 += 24; [--sp] = rets; SP += -12; - call _bfin_vfork; + pseudo_long_call _bfin_vfork, p2; SP += 12; rets = [sp++]; rts; @@ -90,7 +90,7 @@ ENTRY(_sys_clone) r0 += 24; [--sp] = rets; SP += -12; - call _bfin_clone; + pseudo_long_call _bfin_clone, p2; SP += 12; rets = [sp++]; rts; @@ -101,7 +101,7 @@ ENTRY(_sys_rt_sigreturn) r0 += 24; [--sp] = rets; SP += -12; - call _do_rt_sigreturn; + pseudo_long_call _do_rt_sigreturn, p2; SP += 12; rets = [sp++]; rts; diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S index 76dd4fbcd17..d66446b572c 100644 --- a/arch/blackfin/kernel/ftrace-entry.S +++ b/arch/blackfin/kernel/ftrace-entry.S @@ -1,7 +1,7 @@ /* * mcount and friends -- ftrace stuff * - * Copyright (C) 2009 Analog Devices Inc. + * Copyright (C) 2009-2010 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -21,6 +21,15 @@ * function will be waiting there. mmmm pie. */ ENTRY(__mcount) +#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST + /* optional micro optimization: return if stopped */ + p1.l = _function_trace_stop; + p1.h = _function_trace_stop; + r3 = [p1]; + cc = r3 == 0; + if ! cc jump _ftrace_stub (bp); +#endif + /* save third function arg early so we can do testing below */ [--sp] = r2; @@ -106,9 +115,12 @@ ENTRY(_ftrace_graph_caller) [--sp] = r1; [--sp] = rets; - /* prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) */ - r0 = sp; - r1 = rets; + /* prepare_ftrace_return(parent, self_addr, frame_pointer) */ + r0 = sp; /* unsigned long *parent */ + r1 = rets; /* unsigned long self_addr */ +#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST + r2 = fp; /* unsigned long frame_pointer */ +#endif r0 += 16; /* skip the 4 local regs on stack */ r1 += -MCOUNT_INSN_SIZE; call _prepare_ftrace_return; @@ -127,6 +139,9 @@ ENTRY(_return_to_handler) [--sp] = r1; /* get original return address */ +#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST + r0 = fp; /* Blackfin is sane, so omit this */ +#endif call _ftrace_return_to_handler; rets = r0; diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c index f2c85ac6f2d..a61d948ea92 100644 --- a/arch/blackfin/kernel/ftrace.c +++ b/arch/blackfin/kernel/ftrace.c @@ -16,7 +16,8 @@ * Hook the return address and push it in the stack of return addrs * in current thread info. */ -void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long frame_pointer) { struct ftrace_graph_ent trace; unsigned long return_hooker = (unsigned long)&return_to_handler; @@ -24,7 +25,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) if (unlikely(atomic_read(¤t->tracing_graph_pause))) return; - if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, 0) == -EBUSY) + if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, + frame_pointer) == -EBUSY) return; trace.func = self_addr; diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c index 118c5b9deda..d3970e8acd1 100644 --- a/arch/blackfin/kernel/init_task.c +++ b/arch/blackfin/kernel/init_task.c @@ -28,5 +28,5 @@ EXPORT_SYMBOL(init_task); * "init_task" linker map entry. */ union thread_union init_thread_union - __attribute__ ((__section__(".init_task.data"))) = { + __init_task_data = { INIT_THREAD_INFO(init_task)}; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index a77307a4473..1a496cd71ba 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -27,7 +27,6 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/bitops.h> -#include <linux/slab.h> #include <linux/errno.h> #include <linux/kthread.h> #include <linux/unistd.h> diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index 34c7c3ed2c9..2c501ceb1e5 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -145,7 +145,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) #endif } -struct hw_breakpoint { +static struct hw_breakpoint { unsigned int occupied:1; unsigned int skip:1; unsigned int enabled:1; @@ -155,7 +155,7 @@ struct hw_breakpoint { unsigned int addr; } breakinfo[HW_WATCHPOINT_NUM]; -int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) +static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) { int breakno; int bfin_type; @@ -202,7 +202,7 @@ int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) return -ENOSPC; } -int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type) +static int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type) { int breakno; int bfin_type; @@ -230,7 +230,7 @@ int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type) return 0; } -void bfin_remove_all_hw_break(void) +static void bfin_remove_all_hw_break(void) { int breakno; @@ -242,7 +242,7 @@ void bfin_remove_all_hw_break(void) breakinfo[breakno].type = TYPE_DATA_WATCHPOINT; } -void bfin_correct_hw_break(void) +static void bfin_correct_hw_break(void) { int breakno; unsigned int wpiactl = 0; diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c new file mode 100644 index 00000000000..0b5f72f17fd --- /dev/null +++ b/arch/blackfin/kernel/nmi.c @@ -0,0 +1,299 @@ +/* + * Blackfin nmi_watchdog Driver + * + * Originally based on bfin_wdt.c + * Copyright 2010-2010 Analog Devices Inc. + * Graff Yang <graf.yang@analog.com> + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/bitops.h> +#include <linux/hardirq.h> +#include <linux/sysdev.h> +#include <linux/pm.h> +#include <linux/nmi.h> +#include <linux/smp.h> +#include <linux/timer.h> +#include <asm/blackfin.h> +#include <asm/atomic.h> +#include <asm/cacheflush.h> +#include <asm/bfin_watchdog.h> + +#define DRV_NAME "nmi-wdt" + +#define NMI_WDT_TIMEOUT 5 /* 5 seconds */ +#define NMI_CHECK_TIMEOUT (4 * HZ) /* 4 seconds in jiffies */ +static int nmi_wdt_cpu = 1; + +static unsigned int timeout = NMI_WDT_TIMEOUT; +static int nmi_active; + +static unsigned short wdoga_ctl; +static unsigned int wdoga_cnt; +static struct corelock_slot saved_corelock; +static atomic_t nmi_touched[NR_CPUS]; +static struct timer_list ntimer; + +enum { + COREA_ENTER_NMI = 0, + COREA_EXIT_NMI, + COREB_EXIT_NMI, + + NMI_EVENT_NR, +}; +static unsigned long nmi_event __attribute__ ((__section__(".l2.bss"))); + +/* we are in nmi, non-atomic bit ops is safe */ +static inline void set_nmi_event(int event) +{ + __set_bit(event, &nmi_event); +} + +static inline void wait_nmi_event(int event) +{ + while (!test_bit(event, &nmi_event)) + barrier(); + __clear_bit(event, &nmi_event); +} + +static inline void send_corea_nmi(void) +{ + wdoga_ctl = bfin_read_WDOGA_CTL(); + wdoga_cnt = bfin_read_WDOGA_CNT(); + + bfin_write_WDOGA_CTL(WDEN_DISABLE); + bfin_write_WDOGA_CNT(0); + bfin_write_WDOGA_CTL(WDEN_ENABLE | ICTL_NMI); +} + +static inline void restore_corea_nmi(void) +{ + bfin_write_WDOGA_CTL(WDEN_DISABLE); + bfin_write_WDOGA_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE); + + bfin_write_WDOGA_CNT(wdoga_cnt); + bfin_write_WDOGA_CTL(wdoga_ctl); +} + +static inline void save_corelock(void) +{ + saved_corelock = corelock; + corelock.lock = 0; +} + +static inline void restore_corelock(void) +{ + corelock = saved_corelock; +} + + +static inline void nmi_wdt_keepalive(void) +{ + bfin_write_WDOGB_STAT(0); +} + +static inline void nmi_wdt_stop(void) +{ + bfin_write_WDOGB_CTL(WDEN_DISABLE); +} + +/* before calling this function, you must stop the WDT */ +static inline void nmi_wdt_clear(void) +{ + /* clear TRO bit, disable event generation */ + bfin_write_WDOGB_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE); +} + +static inline void nmi_wdt_start(void) +{ + bfin_write_WDOGB_CTL(WDEN_ENABLE | ICTL_NMI); +} + +static inline int nmi_wdt_running(void) +{ + return ((bfin_read_WDOGB_CTL() & WDEN_MASK) != WDEN_DISABLE); +} + +static inline int nmi_wdt_set_timeout(unsigned long t) +{ + u32 cnt, max_t, sclk; + int run; + + sclk = get_sclk(); + max_t = -1 / sclk; + cnt = t * sclk; + if (t > max_t) { + pr_warning("NMI: timeout value is too large\n"); + return -EINVAL; + } + + run = nmi_wdt_running(); + nmi_wdt_stop(); + bfin_write_WDOGB_CNT(cnt); + if (run) + nmi_wdt_start(); + + timeout = t; + + return 0; +} + +int check_nmi_wdt_touched(void) +{ + unsigned int this_cpu = smp_processor_id(); + unsigned int cpu; + + cpumask_t mask = cpu_online_map; + + if (!atomic_read(&nmi_touched[this_cpu])) + return 0; + + atomic_set(&nmi_touched[this_cpu], 0); + + cpu_clear(this_cpu, mask); + for_each_cpu_mask(cpu, mask) { + invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]), + (unsigned long)(&nmi_touched[cpu])); + if (!atomic_read(&nmi_touched[cpu])) + return 0; + atomic_set(&nmi_touched[cpu], 0); + } + + return 1; +} + +static void nmi_wdt_timer(unsigned long data) +{ + if (check_nmi_wdt_touched()) + nmi_wdt_keepalive(); + + mod_timer(&ntimer, jiffies + NMI_CHECK_TIMEOUT); +} + +static int __init init_nmi_wdt(void) +{ + nmi_wdt_set_timeout(timeout); + nmi_wdt_start(); + nmi_active = true; + + init_timer(&ntimer); + ntimer.function = nmi_wdt_timer; + ntimer.expires = jiffies + NMI_CHECK_TIMEOUT; + add_timer(&ntimer); + + pr_info("nmi_wdt: initialized: timeout=%d sec\n", timeout); + return 0; +} +device_initcall(init_nmi_wdt); + +void touch_nmi_watchdog(void) +{ + atomic_set(&nmi_touched[smp_processor_id()], 1); +} + +/* Suspend/resume support */ +#ifdef CONFIG_PM +static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state) +{ + nmi_wdt_stop(); + return 0; +} + +static int nmi_wdt_resume(struct sys_device *dev) +{ + if (nmi_active) + nmi_wdt_start(); + return 0; +} + +static struct sysdev_class nmi_sysclass = { + .name = DRV_NAME, + .resume = nmi_wdt_resume, + .suspend = nmi_wdt_suspend, +}; + +static struct sys_device device_nmi_wdt = { + .id = 0, + .cls = &nmi_sysclass, +}; + +static int __init init_nmi_wdt_sysfs(void) +{ + int error; + + if (!nmi_active) + return 0; + + error = sysdev_class_register(&nmi_sysclass); + if (!error) + error = sysdev_register(&device_nmi_wdt); + return error; +} +late_initcall(init_nmi_wdt_sysfs); + +#endif /* CONFIG_PM */ + + +asmlinkage notrace void do_nmi(struct pt_regs *fp) +{ + unsigned int cpu = smp_processor_id(); + nmi_enter(); + + cpu_pda[cpu].__nmi_count += 1; + + if (cpu == nmi_wdt_cpu) { + /* CoreB goes here first */ + + /* reload the WDOG_STAT */ + nmi_wdt_keepalive(); + + /* clear nmi interrupt for CoreB */ + nmi_wdt_stop(); + nmi_wdt_clear(); + + /* trigger NMI interrupt of CoreA */ + send_corea_nmi(); + + /* waiting CoreB to enter NMI */ + wait_nmi_event(COREA_ENTER_NMI); + + /* recover WDOGA's settings */ + restore_corea_nmi(); + + save_corelock(); + + /* corelock is save/cleared, CoreA is dummping messages */ + + wait_nmi_event(COREA_EXIT_NMI); + } else { + /* OK, CoreA entered NMI */ + set_nmi_event(COREA_ENTER_NMI); + } + + pr_emerg("\nNMI Watchdog detected LOCKUP, dump for CPU %d\n", cpu); + dump_bfin_process(fp); + dump_bfin_mem(fp); + show_regs(fp); + dump_bfin_trace_buffer(); + show_stack(current, (unsigned long *)fp); + + if (cpu == nmi_wdt_cpu) { + pr_emerg("This fault is not recoverable, sorry!\n"); + + /* CoreA dump finished, restore the corelock */ + restore_corelock(); + + set_nmi_event(COREB_EXIT_NMI); + } else { + /* CoreB dump finished, notice the CoreA we are done */ + set_nmi_event(COREA_EXIT_NMI); + + /* synchronize with CoreA */ + wait_nmi_event(COREB_EXIT_NMI); + } + + nmi_exit(); +} diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index b56b0e485e0..93ec07da2e5 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -11,6 +11,7 @@ #include <linux/unistd.h> #include <linux/user.h> #include <linux/uaccess.h> +#include <linux/slab.h> #include <linux/sched.h> #include <linux/tick.h> #include <linux/fs.h> @@ -98,13 +99,6 @@ void cpu_idle(void) } } -/* Fill in the fpu structure for a core dump. */ - -int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs) -{ - return 1; -} - /* * This gets run with P1 containing the * function to call, and R1 containing diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 65567dc4b9f..43eb969405d 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -1,6 +1,6 @@ /* * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds - * these modifications are Copyright 2004-2009 Analog Devices Inc. + * these modifications are Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 */ @@ -9,10 +9,13 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/elf.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> +#include <linux/regset.h> #include <linux/signal.h> +#include <linux/tracehook.h> #include <linux/uaccess.h> #include <asm/page.h> @@ -25,90 +28,57 @@ #include <asm/cacheflush.h> #include <asm/mem_map.h> -#define TEXT_OFFSET 0 /* * does not yet catch signals sent when the child dies. * in exit.c or in signal.c. */ -/* determines which bits in the SYSCFG reg the user has access to. */ -/* 1 = access 0 = no access */ -#define SYSCFG_MASK 0x0007 /* SYSCFG reg */ -/* sets the trace bits. */ -#define TRACE_BITS 0x0001 - -/* Find the stack offset for a register, relative to thread.esp0. */ -#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg) - -/* - * Get the address of the live pt_regs for the specified task. - * These are saved onto the top kernel stack when the process - * is not running. - * - * Note: if a user thread is execve'd from kernel space, the - * kernel stack will not be empty on entry to the kernel, so - * ptracing these tasks will fail. - */ -static inline struct pt_regs *get_user_regs(struct task_struct *task) -{ - return (struct pt_regs *) - ((unsigned long)task_stack_page(task) + - (THREAD_SIZE - sizeof(struct pt_regs))); -} - -/* - * Get all user integer registers. - */ -static inline int ptrace_getregs(struct task_struct *tsk, void __user *uregs) -{ - struct pt_regs regs; - memcpy(®s, get_user_regs(tsk), sizeof(regs)); - regs.usp = tsk->thread.usp; - return copy_to_user(uregs, ®s, sizeof(struct pt_regs)) ? -EFAULT : 0; -} - -/* Mapping from PT_xxx to the stack offset at which the register is - * saved. Notice that usp has no stack-slot and needs to be treated - * specially (see get_reg/put_reg below). - */ - /* * Get contents of register REGNO in task TASK. */ -static inline long get_reg(struct task_struct *task, int regno) +static inline long +get_reg(struct task_struct *task, long regno, unsigned long __user *datap) { - unsigned char *reg_ptr; + long tmp; + struct pt_regs *regs = task_pt_regs(task); - struct pt_regs *regs = - (struct pt_regs *)((unsigned long)task_stack_page(task) + - (THREAD_SIZE - sizeof(struct pt_regs))); - reg_ptr = (char *)regs; + if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0) + return -EIO; switch (regno) { + case PT_TEXT_ADDR: + tmp = task->mm->start_code; + break; + case PT_TEXT_END_ADDR: + tmp = task->mm->end_code; + break; + case PT_DATA_ADDR: + tmp = task->mm->start_data; + break; case PT_USP: - return task->thread.usp; + tmp = task->thread.usp; + break; default: - if (regno <= 216) - return *(long *)(reg_ptr + regno); + if (regno < sizeof(*regs)) { + void *reg_ptr = regs; + tmp = *(long *)(reg_ptr + regno); + } else + return -EIO; } - /* slight mystery ... never seems to come here but kernel misbehaves without this code! */ - printk(KERN_WARNING "Request to get for unknown register %d\n", regno); - return 0; + return put_user(tmp, datap); } /* * Write contents of register REGNO in task TASK. */ static inline int -put_reg(struct task_struct *task, int regno, unsigned long data) +put_reg(struct task_struct *task, long regno, unsigned long data) { - char *reg_ptr; + struct pt_regs *regs = task_pt_regs(task); - struct pt_regs *regs = - (struct pt_regs *)((unsigned long)task_stack_page(task) + - (THREAD_SIZE - sizeof(struct pt_regs))); - reg_ptr = (char *)regs; + if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0) + return -EIO; switch (regno) { case PT_PC: @@ -125,10 +95,18 @@ put_reg(struct task_struct *task, int regno, unsigned long data) regs->usp = data; task->thread.usp = data; break; + case PT_SYSCFG: /* don't let userspace screw with this */ + if ((data & ~1) != 0x6) + pr_warning("ptrace: ignore syscfg write of %#lx\n", data); + break; /* regs->syscfg = data; break; */ default: - if (regno <= 216) - *(long *)(reg_ptr + regno) = data; + if (regno < sizeof(*regs)) { + void *reg_offset = regs; + *(long *)(reg_offset + regno) = data; + } + /* Ignore writes to pseudo registers */ } + return 0; } @@ -160,24 +138,98 @@ static inline int is_user_addr_valid(struct task_struct *child, return -EIO; } -void ptrace_enable(struct task_struct *child) +/* + * retrieve the contents of Blackfin userspace general registers + */ +static int genregs_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) { - unsigned long tmp; - tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS); - put_reg(child, PT_SYSCFG, tmp); + struct pt_regs *regs = task_pt_regs(target); + int ret; + + /* This sucks ... */ + regs->usp = target->thread.usp; + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + regs, 0, sizeof(*regs)); + if (ret < 0) + return ret; + + return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + sizeof(*regs), -1); } /* - * Called by kernel/ptrace.c when detaching.. - * - * Make sure the single step bit is not set. + * update the contents of the Blackfin userspace general registers + */ +static int genregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + int ret; + + /* Don't let people set SYSCFG (it's at the end of pt_regs) */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + regs, 0, PT_SYSCFG); + if (ret < 0) + return ret; + + /* This sucks ... */ + target->thread.usp = regs->usp; + /* regs->retx = regs->pc; */ + + return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + PT_SYSCFG, -1); +} + +/* + * Define the register sets available on the Blackfin under Linux */ -void ptrace_disable(struct task_struct *child) +enum bfin_regset { + REGSET_GENERAL, +}; + +static const struct user_regset bfin_regsets[] = { + [REGSET_GENERAL] = { + .core_note_type = NT_PRSTATUS, + .n = sizeof(struct pt_regs) / sizeof(long), + .size = sizeof(long), + .align = sizeof(long), + .get = genregs_get, + .set = genregs_set, + }, +}; + +static const struct user_regset_view user_bfin_native_view = { + .name = "Blackfin", + .e_machine = EM_BLACKFIN, + .regsets = bfin_regsets, + .n = ARRAY_SIZE(bfin_regsets), +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_bfin_native_view; +} + +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = task_pt_regs(child); + regs->syscfg |= SYSCFG_SSSTEP; + + set_tsk_thread_flag(child, TIF_SINGLESTEP); +} + +void user_disable_single_step(struct task_struct *child) { - unsigned long tmp; - /* make sure the single step bit is not set. */ - tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS; - put_reg(child, PT_SYSCFG, tmp); + struct pt_regs *regs = task_pt_regs(child); + regs->syscfg &= ~SYSCFG_SSSTEP; + + clear_tsk_thread_flag(child, TIF_SINGLESTEP); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -240,40 +292,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: - { - unsigned long tmp; - ret = -EIO; - tmp = 0; - if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) { - printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning " - "0 - %x sizeof(pt_regs) is %lx\n", - (int)addr, sizeof(struct pt_regs)); - break; - } - if (addr == sizeof(struct pt_regs)) { - /* PT_TEXT_ADDR */ - tmp = child->mm->start_code + TEXT_OFFSET; - } else if (addr == (sizeof(struct pt_regs) + 4)) { - /* PT_TEXT_END_ADDR */ - tmp = child->mm->end_code; - } else if (addr == (sizeof(struct pt_regs) + 8)) { - /* PT_DATA_ADDR */ - tmp = child->mm->start_data; -#ifdef CONFIG_BINFMT_ELF_FDPIC - } else if (addr == (sizeof(struct pt_regs) + 12)) { - goto case_PTRACE_GETFDPIC_EXEC; - } else if (addr == (sizeof(struct pt_regs) + 16)) { - goto case_PTRACE_GETFDPIC_INTERP; -#endif - } else { - tmp = get_reg(child, addr); - } - ret = put_user(tmp, datap); - break; - } - #ifdef CONFIG_BINFMT_ELF_FDPIC case PTRACE_GETFDPIC: { unsigned long tmp = 0; @@ -336,78 +354,36 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - ret = -EIO; - if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) { - printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n"); - break; - } - - if (addr >= (sizeof(struct pt_regs))) { - ret = 0; - break; - } - if (addr == PT_SYSCFG) { - data &= SYSCFG_MASK; - data |= get_reg(child, PT_SYSCFG); + case PTRACE_PEEKUSR: + switch (addr) { +#ifdef CONFIG_BINFMT_ELF_FDPIC /* backwards compat */ + case PT_FDPIC_EXEC: goto case_PTRACE_GETFDPIC_EXEC; + case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP; +#endif + default: + ret = get_reg(child, addr, datap); } - ret = put_reg(child, addr, data); + pr_debug("ptrace: PEEKUSR reg %li with %#lx = %i\n", addr, data, ret); break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: /* restart after signal. */ - pr_debug("ptrace: syscall/cont\n"); - - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - ptrace_disable(child); - pr_debug("ptrace: before wake_up_process\n"); - wake_up_process(child); - ret = 0; - break; - - /* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - ptrace_disable(child); - wake_up_process(child); - break; - - case PTRACE_SINGLESTEP: /* set the trap flag. */ - pr_debug("ptrace: single step\n"); - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - ptrace_enable(child); - child->exit_code = data; - wake_up_process(child); - ret = 0; + case PTRACE_POKEUSR: + ret = put_reg(child, addr, data); + pr_debug("ptrace: POKEUSR reg %li with %li = %i\n", addr, data, ret); break; case PTRACE_GETREGS: - /* Get all gp regs from the child. */ - ret = ptrace_getregs(child, datap); - break; + pr_debug("ptrace: PTRACE_GETREGS\n"); + return copy_regset_to_user(child, &user_bfin_native_view, + REGSET_GENERAL, + 0, sizeof(struct pt_regs), + (void __user *)data); case PTRACE_SETREGS: - printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n"); - /* Set all gp regs in the child. */ - ret = 0; - break; + pr_debug("ptrace: PTRACE_SETREGS\n"); + return copy_regset_from_user(child, &user_bfin_native_view, + REGSET_GENERAL, + 0, sizeof(struct pt_regs), + (const void __user *)data); default: ret = ptrace_request(child, request, addr, data); @@ -417,27 +393,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void syscall_trace(void) +asmlinkage int syscall_trace_enter(struct pt_regs *regs) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - - if (!(current->ptrace & PT_PTRACED)) - return; - - /* the 0x80 provides a way for the tracing parent to distinguish - * between a syscall stop and SIGTRAP delivery - */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + int ret = 0; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + ret = tracehook_report_syscall_entry(regs); + + return ret; +} + +asmlinkage void syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 95448ae9c43..8e2efceb364 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -220,6 +220,16 @@ void __init bfin_relocate_l1_mem(void) memcpy(_stext_l2, _l2_lma, l2_len); } +#ifdef CONFIG_ROMKERNEL +void __init bfin_relocate_xip_data(void) +{ + early_shadow_stamp(); + + memcpy(_sdata, _data_lma, (unsigned long)_data_len - THREAD_SIZE + sizeof(struct thread_info)); + memcpy(_sinitdata, _init_data_lma, (unsigned long)_init_data_len); +} +#endif + /* add_memory_region to memmap */ static void __init add_memory_region(unsigned long long start, unsigned long long size, int type) @@ -504,7 +514,7 @@ static __init void memory_setup(void) #endif unsigned long max_mem; - _rambase = (unsigned long)_stext; + _rambase = CONFIG_BOOT_LOAD; _ramstart = (unsigned long)_end; if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) { @@ -597,7 +607,12 @@ static __init void memory_setup(void) } #ifdef CONFIG_MPU +#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM) + page_mask_nelts = (((_ramend + ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE - + ASYNC_BANK0_BASE) >> PAGE_SHIFT) + 31) / 32; +#else page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32; +#endif page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); #endif @@ -630,7 +645,7 @@ static __init void memory_setup(void) __bss_start, __bss_stop, _sdata, _edata, (void *)&init_thread_union, - (void *)((int)(&init_thread_union) + 0x2000), + (void *)((int)(&init_thread_union) + THREAD_SIZE), __init_begin, __init_end, (void *)_ramstart, (void *)memory_end #ifdef CONFIG_MTD_UCLINUX @@ -792,10 +807,17 @@ static inline int __init get_mem_size(void) BUG(); } +__attribute__((weak)) +void __init native_machine_early_platform_add_devices(void) +{ +} + void __init setup_arch(char **cmdline_p) { unsigned long sclk, cclk; + native_machine_early_platform_add_devices(); + enable_shadow_console(); /* Check to make sure we are running on the right processor */ @@ -1217,10 +1239,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); #ifdef __ARCH_SYNC_CORE_DCACHE - seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count); + seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", dcache_invld_count[cpu_num]); #endif #ifdef __ARCH_SYNC_CORE_ICACHE - seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count); + seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", icache_invld_count[cpu_num]); #endif if (cpu_num != num_possible_cpus() - 1) @@ -1249,8 +1271,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n", - ((int)memory_end - (int)_stext) >> 10, - _stext, + ((int)memory_end - (int)_rambase) >> 10, + (void *)_rambase, (void *)memory_end); seq_printf(m, "\n"); diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index e0fd63e9e38..d536f35d1f4 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later */ @@ -17,6 +17,7 @@ #include <asm/cacheflush.h> #include <asm/ucontext.h> #include <asm/fixed_code.h> +#include <asm/syscall.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -50,6 +51,9 @@ rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *p unsigned long usp = 0; int err = 0; + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + #define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x) /* restore passed registers */ @@ -206,16 +210,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, regs->r1 = (unsigned long)(&frame->info); regs->r2 = (unsigned long)(&frame->uc); - /* - * Clear the trace flag when entering the signal handler, but - * notify any tracer that was single-stepping it. The tracer - * may want to single-step inside the handler too. - */ - if (regs->syscfg & TRACE_BITS) { - regs->syscfg &= ~TRACE_BITS; - ptrace_notify(SIGTRAP); - } - return 0; give_sigsegv: @@ -247,6 +241,11 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) regs->r0 = regs->orig_r0; regs->pc -= 2; break; + + case -ERESTART_RESTARTBLOCK: + regs->p0 = __NR_restart_syscall; + regs->pc -= 2; + break; } } @@ -315,6 +314,9 @@ asmlinkage void do_signal(struct pt_regs *regs) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return; diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 17c38c5b5b2..cb7a01d4f00 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -21,6 +21,7 @@ #include <asm/blackfin.h> #include <asm/time.h> #include <asm/gptimers.h> +#include <asm/nmi.h> /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) @@ -50,7 +51,11 @@ static notrace cycle_t bfin_read_cycles(struct clocksource *cs) { +#ifdef CONFIG_CPU_FREQ return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); +#else + return get_cycles(); +#endif } static struct clocksource bfin_cs_cycles = { @@ -132,7 +137,6 @@ static int __init bfin_cs_gptimer0_init(void) # define bfin_cs_gptimer0_init() #endif - #if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE) /* prefer to use cycles since it has higher rating */ notrace unsigned long long sched_clock(void) @@ -145,47 +149,8 @@ notrace unsigned long long sched_clock(void) } #endif -#ifdef CONFIG_CORE_TIMER_IRQ_L1 -__attribute__((l1_text)) -#endif -irqreturn_t timer_interrupt(int irq, void *dev_id); - -static int bfin_timer_set_next_event(unsigned long, \ - struct clock_event_device *); - -static void bfin_timer_set_mode(enum clock_event_mode, \ - struct clock_event_device *); - -static struct clock_event_device clockevent_bfin = { -#if defined(CONFIG_TICKSOURCE_GPTMR0) - .name = "bfin_gptimer0", - .rating = 300, - .irq = IRQ_TIMER0, -#else - .name = "bfin_core_timer", - .rating = 350, - .irq = IRQ_CORETMR, -#endif - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = bfin_timer_set_next_event, - .set_mode = bfin_timer_set_mode, -}; - -static struct irqaction bfin_timer_irq = { -#if defined(CONFIG_TICKSOURCE_GPTMR0) - .name = "Blackfin GPTimer0", -#else - .name = "Blackfin CoreTimer", -#endif - .flags = IRQF_DISABLED | IRQF_TIMER | \ - IRQF_IRQPOLL | IRQF_PERCPU, - .handler = timer_interrupt, - .dev_id = &clockevent_bfin, -}; - #if defined(CONFIG_TICKSOURCE_GPTMR0) -static int bfin_timer_set_next_event(unsigned long cycles, +static int bfin_gptmr0_set_next_event(unsigned long cycles, struct clock_event_device *evt) { disable_gptimers(TIMER0bit); @@ -196,7 +161,7 @@ static int bfin_timer_set_next_event(unsigned long cycles, return 0; } -static void bfin_timer_set_mode(enum clock_event_mode mode, +static void bfin_gptmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { switch (mode) { @@ -224,25 +189,65 @@ static void bfin_timer_set_mode(enum clock_event_mode mode, } } -static void bfin_timer_ack(void) +static void bfin_gptmr0_ack(void) { set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0); } -static void __init bfin_timer_init(void) +static void __init bfin_gptmr0_init(void) { disable_gptimers(TIMER0bit); } -static unsigned long __init bfin_clockevent_check(void) +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id) { - setup_irq(IRQ_TIMER0, &bfin_timer_irq); - return get_sclk(); + struct clock_event_device *evt = dev_id; + smp_mb(); + evt->event_handler(evt); + bfin_gptmr0_ack(); + return IRQ_HANDLED; } -#else /* CONFIG_TICKSOURCE_CORETMR */ +static struct irqaction gptmr0_irq = { + .name = "Blackfin GPTimer0", + .flags = IRQF_DISABLED | IRQF_TIMER | \ + IRQF_IRQPOLL | IRQF_PERCPU, + .handler = bfin_gptmr0_interrupt, +}; -static int bfin_timer_set_next_event(unsigned long cycles, +static struct clock_event_device clockevent_gptmr0 = { + .name = "bfin_gptimer0", + .rating = 300, + .irq = IRQ_TIMER0, + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = bfin_gptmr0_set_next_event, + .set_mode = bfin_gptmr0_set_mode, +}; + +static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt) +{ + unsigned long clock_tick; + + clock_tick = get_sclk(); + evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(-1, evt); + evt->min_delta_ns = clockevent_delta2ns(100, evt); + + evt->cpumask = cpumask_of(0); + + clockevents_register_device(evt); +} +#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + +#if defined(CONFIG_TICKSOURCE_CORETMR) +/* per-cpu local core timer */ +static DEFINE_PER_CPU(struct clock_event_device, coretmr_events); + +static int bfin_coretmr_set_next_event(unsigned long cycles, struct clock_event_device *evt) { bfin_write_TCNTL(TMPWR); @@ -253,7 +258,7 @@ static int bfin_timer_set_next_event(unsigned long cycles, return 0; } -static void bfin_timer_set_mode(enum clock_event_mode mode, +static void bfin_coretmr_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { switch (mode) { @@ -285,19 +290,13 @@ static void bfin_timer_set_mode(enum clock_event_mode mode, } } -static void bfin_timer_ack(void) -{ -} - -static void __init bfin_timer_init(void) +void bfin_coretmr_init(void) { /* power up the timer, but don't enable it just yet */ bfin_write_TCNTL(TMPWR); CSYNC(); - /* - * the TSCALE prescaler counter. - */ + /* the TSCALE prescaler counter. */ bfin_write_TSCALE(TIME_SCALE - 1); bfin_write_TPERIOD(0); bfin_write_TCOUNT(0); @@ -305,48 +304,54 @@ static void __init bfin_timer_init(void) CSYNC(); } -static unsigned long __init bfin_clockevent_check(void) -{ - setup_irq(IRQ_CORETMR, &bfin_timer_irq); - return get_cclk() / TIME_SCALE; -} - -void __init setup_core_timer(void) +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id) { - bfin_timer_init(); - bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL); -} -#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(coretmr_events, cpu); -/* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick - */ -irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; smp_mb(); evt->event_handler(evt); - bfin_timer_ack(); - return IRQ_HANDLED; -} - -static int __init bfin_clockevent_init(void) -{ - unsigned long timer_clk; - timer_clk = bfin_clockevent_check(); + touch_nmi_watchdog(); - bfin_timer_init(); + return IRQ_HANDLED; +} - clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift); - clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin); - clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin); - clockevent_bfin.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_bfin); +static struct irqaction coretmr_irq = { + .name = "Blackfin CoreTimer", + .flags = IRQF_DISABLED | IRQF_TIMER | \ + IRQF_IRQPOLL | IRQF_PERCPU, + .handler = bfin_coretmr_interrupt, +}; - return 0; +void bfin_coretmr_clockevent_init(void) +{ + unsigned long clock_tick; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(coretmr_events, cpu); + + evt->name = "bfin_core_timer"; + evt->rating = 350; + evt->irq = -1; + evt->shift = 32; + evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + evt->set_next_event = bfin_coretmr_set_next_event; + evt->set_mode = bfin_coretmr_set_mode; + + clock_tick = get_cclk() / TIME_SCALE; + evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(-1, evt); + evt->min_delta_ns = clockevent_delta2ns(100, evt); + + evt->cpumask = cpumask_of(cpu); + + clockevents_register_device(evt); } +#endif /* CONFIG_TICKSOURCE_CORETMR */ + void __init time_init(void) { @@ -370,5 +375,21 @@ void __init time_init(void) bfin_cs_cycles_init(); bfin_cs_gptimer0_init(); - bfin_clockevent_init(); + +#if defined(CONFIG_TICKSOURCE_CORETMR) + bfin_coretmr_init(); + setup_irq(IRQ_CORETMR, &coretmr_irq); + bfin_coretmr_clockevent_init(); +#endif + +#if defined(CONFIG_TICKSOURCE_GPTMR0) + bfin_gptmr0_init(); + setup_irq(IRQ_TIMER0, &gptmr0_irq); + gptmr0_irq.dev_id = &clockevent_gptmr0; + bfin_gptmr0_clockevent_init(&clockevent_gptmr0); +#endif + +#if !defined(CONFIG_TICKSOURCE_CORETMR) && !defined(CONFIG_TICKSOURCE_GPTMR0) +# error at least one clock event device is required +#endif } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index d3cbcd6bd98..ba70c4bc269 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -138,6 +138,12 @@ static void decode_address(char *buf, unsigned long address) if (!mm) continue; + if (!down_read_trylock(&mm->mmap_sem)) { + if (!in_atomic) + mmput(mm); + continue; + } + for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { struct vm_area_struct *vma; @@ -177,6 +183,7 @@ static void decode_address(char *buf, unsigned long address) sprintf(buf, "[ %s vma:0x%lx-0x%lx]", name, vma->vm_start, vma->vm_end); + up_read(&mm->mmap_sem); if (!in_atomic) mmput(mm); @@ -186,11 +193,16 @@ static void decode_address(char *buf, unsigned long address) goto done; } } + + up_read(&mm->mmap_sem); if (!in_atomic) mmput(mm); } - /* we were unable to find this address anywhere */ + /* + * we were unable to find this address anywhere, + * or some MMs were skipped because they were in use. + */ sprintf(buf, "/* kernel dynamic memory */"); done: @@ -248,9 +260,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int j; #endif -#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO unsigned int cpu = raw_smp_processor_id(); -#endif const char *strerror = NULL; int sig = 0; siginfo_t info; @@ -639,7 +649,17 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) { info.si_signo = sig; info.si_errno = 0; - info.si_addr = (void __user *)fp->pc; + switch (trapnr) { + case VEC_CPLB_VL: + case VEC_MISALI_D: + case VEC_CPLB_M: + case VEC_CPLB_MHIT: + info.si_addr = (void __user *)cpu_pda[cpu].dcplb_fault_addr; + break; + default: + info.si_addr = (void __user *)fp->pc; + break; + } force_sig_info(sig, &info, current); } @@ -712,7 +732,7 @@ static void decode_instruction(unsigned short *address) verbose_printk("RTE"); else if (opcode == 0x0025) verbose_printk("EMUEXCPT"); - else if (opcode == 0x0040 && opcode <= 0x0047) + else if (opcode >= 0x0040 && opcode <= 0x0047) verbose_printk("STI R%i", opcode & 7); else if (opcode >= 0x0050 && opcode <= 0x0057) verbose_printk("JUMP (P%i)", opcode & 7); @@ -1096,7 +1116,7 @@ void dump_bfin_mem(struct pt_regs *fp) /* And the last RETI points to the current userspace context */ if ((fp + 1)->pc >= current->mm->start_code && (fp + 1)->pc <= current->mm->end_code) { - verbose_printk(KERN_NOTICE "It might be better to look around here : \n"); + verbose_printk(KERN_NOTICE "It might be better to look around here :\n"); verbose_printk(KERN_NOTICE "-------------------------------------------\n"); show_regs(fp + 1); verbose_printk(KERN_NOTICE "-------------------------------------------\n"); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 66799e763dc..984c7817239 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -15,7 +15,12 @@ _jiffies = _jiffies_64; SECTIONS { +#ifdef CONFIG_RAMKERNEL . = CONFIG_BOOT_LOAD; +#else + . = CONFIG_ROM_BASE; +#endif + /* Neither the text, ro_data or bss section need to be aligned * So pack them back to back */ @@ -31,6 +36,12 @@ SECTIONS LOCK_TEXT IRQENTRY_TEXT KPROBES_TEXT +#ifdef CONFIG_ROMKERNEL + __sinittext = .; + INIT_TEXT + __einittext = .; + EXIT_TEXT +#endif *(.text.*) *(.fixup) @@ -50,8 +61,14 @@ SECTIONS /* Just in case the first read only is a 32-bit access */ RO_DATA(4) + __rodata_end = .; +#ifdef CONFIG_ROMKERNEL + . = CONFIG_BOOT_LOAD; + .bss : AT(__rodata_end) +#else .bss : +#endif { . = ALIGN(4); ___bss_start = .; @@ -67,7 +84,11 @@ SECTIONS ___bss_stop = .; } +#if defined(CONFIG_ROMKERNEL) + .data : AT(LOADADDR(.bss) + SIZEOF(.bss)) +#else .data : +#endif { __sdata = .; /* This gets done first, so the glob doesn't suck it in */ @@ -94,6 +115,8 @@ SECTIONS __edata = .; } + __data_lma = LOADADDR(.data); + __data_len = SIZEOF(.data); /* The init section should be last, so when we free it, it goes into * the general memory pool, and (hopefully) will decrease fragmentation @@ -103,25 +126,58 @@ SECTIONS . = ALIGN(PAGE_SIZE); ___init_begin = .; +#ifdef CONFIG_RAMKERNEL INIT_TEXT_SECTION(PAGE_SIZE) - . = ALIGN(16); - INIT_DATA_SECTION(16) - PERCPU(4) - /* we have to discard exit text and such at runtime, not link time, to + /* We have to discard exit text and such at runtime, not link time, to * handle embedded cross-section references (alt instructions, bug - * table, eh_frame, etc...) + * table, eh_frame, etc...). We need all of our .text up front and + * .data after it for PCREL call issues. */ .exit.text : { EXIT_TEXT } + + . = ALIGN(16); + INIT_DATA_SECTION(16) + PERCPU(4) + .exit.data : { EXIT_DATA } .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data)) +#else + .init.data : AT(__data_lma + __data_len) + { + __sinitdata = .; + INIT_DATA + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + + . = ALIGN(4); + ___per_cpu_load = .; + ___per_cpu_start = .; + *(.data.percpu.first) + *(.data.percpu.page_aligned) + *(.data.percpu) + *(.data.percpu.shared_aligned) + ___per_cpu_end = .; + + EXIT_DATA + __einitdata = .; + } + __init_data_lma = LOADADDR(.init.data); + __init_data_len = SIZEOF(.init.data); + __init_data_end = .; + + .text_l1 L1_CODE_START : AT(__init_data_lma + __init_data_len) +#endif { . = ALIGN(4); __stext_l1 = .; @@ -202,7 +258,11 @@ SECTIONS /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ +#ifdef CONFIG_RAMKERNEL . = __l2_lma + __l2_len; +#else + . = __init_data_end; +#endif . = ALIGN(PAGE_SIZE); ___init_end = .; diff --git a/arch/blackfin/mach-bf518/boards/Kconfig b/arch/blackfin/mach-bf518/boards/Kconfig index 96163514ed2..252261ec04c 100644 --- a/arch/blackfin/mach-bf518/boards/Kconfig +++ b/arch/blackfin/mach-bf518/boards/Kconfig @@ -9,4 +9,9 @@ config BFIN518F_EZBRD help BF518-EZBRD board support. +config BFIN518F_TCM + bool "Bluetechnix TCM-BF518" + help + Bluetechnix TCM-BF518 board support. + endchoice diff --git a/arch/blackfin/mach-bf518/boards/Makefile b/arch/blackfin/mach-bf518/boards/Makefile index 172e859c3a7..a9ef25c6b30 100644 --- a/arch/blackfin/mach-bf518/boards/Makefile +++ b/arch/blackfin/mach-bf518/boards/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_BFIN518F_EZBRD) += ezbrd.o +obj-$(CONFIG_BFIN518F_TCM) += tcm-bf518.o diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 01975c01711..44d6d529902 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -499,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -593,7 +715,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -610,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -644,6 +775,33 @@ static int __init ezbrd_init(void) arch_initcall(ezbrd_init); +static struct platform_device *ezbrd_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezbrd_early_devices, + ARRAY_SIZE(ezbrd_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c new file mode 100644 index 00000000000..9b72e5cb21f --- /dev/null +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -0,0 +1,753 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <asm/bfin_sdh.h> +#include <linux/spi/ad7877.h> +#include <net/dsa.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix TCM-BF518"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition tcm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, + { + .name = "linux(nor)", + .size = 0x1C0000, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data tcm_flash_data = { + .width = 2, + .parts = tcm_partitions, + .nr_parts = ARRAY_SIZE(tcm_partitions), +}; + +static struct resource tcm_flash_resource = { + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device tcm_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &tcm_flash_data, + }, + .num_resources = 1, + .resource = &tcm_flash_resource, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) +static struct bfin5xx_spi_chip spi_wm8731_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* SPI0_SSEL2 */ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_BFIN_SPI_ADC) \ + || defined(CONFIG_BFIN_SPI_ADC_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) + { + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF8, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) + { + .modalias = "wm8731", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_wm8731_chip_info, + .mode = SPI_MODE_0, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + { + .modalias = "bfin-lq035q1-spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &lq035q1_spi_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +}; + +/* SPI controller data */ +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 6, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; + +/* SPI (1) */ +static struct bfin5xx_spi_master bfin_spi1_info = { + .num_chipselect = 5, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi1_device = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bfin_spi1_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = UART0_THR, + .end = UART0_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + }, +#endif +#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .irq = IRQ_PF8, + }, +#endif +}; + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_RSI, + .irq_int0 = IRQ_RSI_INT0, + .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0}, +}; + +static struct platform_device bf51x_sdh_device = { + .name = "bfin-sdh", + .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_100, 400000000), + VRPAIR(VLEV_105, 426000000), + VRPAIR(VLEV_110, 500000000), + VRPAIR(VLEV_115, 533000000), + VRPAIR(VLEV_120, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *tcm_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, + &bfin_mac_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, + &bfin_spi1_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + &bf51x_sdh_device, +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &tcm_flash_device, +#endif +}; + +static int __init tcm_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); + platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices)); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(tcm_init); + +static struct platform_device *tcm_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(tcm_early_devices, + ARRAY_SIZE(tcm_early_devices)); +} + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); +} + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h index 14e52ec7afa..435e76e31aa 100644 --- a/arch/blackfin/mach-bf518/include/mach/irq.h +++ b/arch/blackfin/mach-bf518/include/mach/irq.h @@ -151,7 +151,17 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PH15 + 1) +#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ + +#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h index 3c6777cb353..073b5d73d39 100644 --- a/arch/blackfin/mach-bf518/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h @@ -41,7 +41,7 @@ #define L1_DATA_A_START 0xFF800000 #define L1_DATA_B_START 0xFF900000 -#define L1_CODE_LENGTH 0xC000 +#define L1_CODE_LENGTH 0x8000 #ifdef CONFIG_BFIN_DCACHE diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig index df224d04e16..b14c28810a4 100644 --- a/arch/blackfin/mach-bf527/boards/Kconfig +++ b/arch/blackfin/mach-bf527/boards/Kconfig @@ -9,6 +9,11 @@ config BFIN527_EZKIT help BF527-EZKIT-LITE board support. +config BFIN527_EZKIT_V2 + bool "BF527-EZKIT-V2" + help + BF527-EZKIT-LITE V2.1+ board support. + config BFIN527_BLUETECHNIX_CM bool "Bluetechnix CM-BF527" help diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile index eb6ed3362f9..51a5817c4a9 100644 --- a/arch/blackfin/mach-bf527/boards/Makefile +++ b/arch/blackfin/mach-bf527/boards/Makefile @@ -3,5 +3,6 @@ # obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN527_EZKIT_V2) += ezkit.o obj-$(CONFIG_BFIN527_BLUETECHNIX_CM) += cm_bf527.o obj-$(CONFIG_BFIN526_EZBRD) += ezbrd.o diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 7ab0800e291..ebe76d1e874 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -18,7 +18,6 @@ #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb/sl811.h> #include <linux/usb/musb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -270,50 +269,6 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -384,8 +339,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -462,8 +417,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -603,30 +558,105 @@ static struct platform_device cm_flash_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin */ + .start = GPIO_PF9, + .end = GPIO_PF9, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PF10, + .end = GPIO_PF10, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -725,16 +755,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -795,10 +884,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif @@ -829,7 +914,12 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -846,9 +936,13 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -871,6 +965,33 @@ static int __init cm_init(void) arch_initcall(cm_init); +static struct platform_device *cmbf527_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cmbf527_early_devices, + ARRAY_SIZE(cmbf527_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index cad23b15d83..55069af4f67 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -274,8 +274,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif @@ -439,30 +439,105 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin */ + .start = GPIO_PG0, + .end = GPIO_PG0, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PF10, + .end = GPIO_PF10, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -556,16 +631,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -615,9 +749,10 @@ static struct platform_device bfin_dpmc = { #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 1, - .gpio_bl = GPIO_PG12, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 1, + .gpio_bl = GPIO_PG12, }; static struct resource bfin_lq035q1_resources[] = { @@ -665,7 +800,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) @@ -686,9 +826,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -711,6 +855,33 @@ static int __init ezbrd_init(void) arch_initcall(ezbrd_init); +static struct platform_device *ezbrd_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezbrd_early_devices, + ARRAY_SIZE(ezbrd_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 5294fdd2073..923383386aa 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -16,8 +16,9 @@ #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb/sl811.h> #include <linux/usb/musb.h> +#include <linux/leds.h> +#include <linux/input.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -29,7 +30,11 @@ /* * Name the Board for the /proc/cpuinfo */ +#ifdef CONFIG_BFIN527_EZKIT_V2 +const char bfin_board_name[] = "ADI BF527-EZKIT V2"; +#else const char bfin_board_name[] = "ADI BF527-EZKIT"; +#endif /* * Driver needs to know address, irq and flag pin. @@ -143,6 +148,33 @@ static struct platform_device bf52x_t350mcqb_device = { }; #endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#include <asm/bfin-lq035q1.h> + +static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_8_BIT_PPI, +}; + +static struct resource bfin_lq035q1_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_lq035q1_device = { + .name = "bfin-lq035q1", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), + .resource = bfin_lq035q1_resources, + .dev = { + .platform_data = &bfin_lq035q1_data, + }, +}; +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { @@ -326,50 +358,6 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -440,8 +428,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -488,8 +476,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 0, /* Export GPIO to gpiolib */ }; #endif @@ -500,14 +487,6 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = { }; #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) static struct bfin5xx_spi_chip spidev_chip_info = { .enable_dma = 0, @@ -515,6 +494,29 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -542,8 +544,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -586,17 +588,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) - { - .modalias = "wm8731", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, - .mode = SPI_MODE_0, - }, -#endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", @@ -606,6 +597,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &spidev_chip_info, }, #endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + { + .modalias = "bfin-lq035q1-spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .controller_data = &lq035q1_spi_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -647,30 +648,105 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin */ + .start = GPIO_PF9, + .end = GPIO_PF9, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PF10, + .end = GPIO_PF10, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -749,6 +825,71 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#include <linux/mfd/adp5520.h> + + /* + * ADP5520/5501 LEDs Data + */ + +static struct led_info adp5520_leds[] = { + { + .name = "adp5520-led1", + .default_trigger = "none", + .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms, + }, +}; + +static struct adp5520_leds_platform_data adp5520_leds_data = { + .num_leds = ARRAY_SIZE(adp5520_leds), + .leds = adp5520_leds, + .fade_in = ADP5520_FADE_T_600ms, + .fade_out = ADP5520_FADE_T_600ms, + .led_on_time = ADP5520_LED_ONT_600ms, +}; + + /* + * ADP5520 Keypad Data + */ + +static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = { + [ADP5520_KEY(3, 3)] = KEY_1, + [ADP5520_KEY(2, 3)] = KEY_2, + [ADP5520_KEY(1, 3)] = KEY_3, + [ADP5520_KEY(0, 3)] = KEY_UP, + [ADP5520_KEY(3, 2)] = KEY_4, + [ADP5520_KEY(2, 2)] = KEY_5, + [ADP5520_KEY(1, 2)] = KEY_6, + [ADP5520_KEY(0, 2)] = KEY_DOWN, + [ADP5520_KEY(3, 1)] = KEY_7, + [ADP5520_KEY(2, 1)] = KEY_8, + [ADP5520_KEY(1, 1)] = KEY_9, + [ADP5520_KEY(0, 1)] = KEY_DOT, + [ADP5520_KEY(3, 0)] = KEY_BACKSPACE, + [ADP5520_KEY(2, 0)] = KEY_0, + [ADP5520_KEY(1, 0)] = KEY_HELP, + [ADP5520_KEY(0, 0)] = KEY_ENTER, +}; + +static struct adp5520_keys_platform_data adp5520_keys_data = { + .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0, + .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0, + .keymap = adp5520_keymap, + .keymapsize = ARRAY_SIZE(adp5520_keymap), + .repeat = 0, +}; + + /* + * ADP5520/5501 Multifuction Device Init Data + */ + +static struct adp5520_platform_data adp5520_pdev_data = { + .leds = &adp5520_leds_data, + .keys = &adp5520_keys_data, +}; + +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { @@ -766,22 +907,99 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif +#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) + { + I2C_BOARD_INFO("ad7879", 0x2C), + .irq = IRQ_PF8, + .platform_data = (void *)&bfin_ad7879_ts_info, + }, +#endif +#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) + { + I2C_BOARD_INFO("pmic-adp5520", 0x32), + .irq = IRQ_PF9, + .platform_data = (void *)&adp5520_pdev_data, + }, +#endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include <linux/input.h> #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -803,7 +1021,6 @@ static struct platform_device bfin_device_gpiokeys = { #endif #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) -#include <linux/input.h> #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -872,10 +1089,6 @@ static struct platform_device *stamp_devices[] __initdata = { &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) &bfin_isp1760_device, #endif @@ -909,8 +1122,17 @@ static struct platform_device *stamp_devices[] __initdata = { &bf52x_t350mcqb_device, #endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + &bfin_lq035q1_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -927,9 +1149,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -942,6 +1168,14 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif }; static int __init ezkit_init(void) @@ -956,6 +1190,33 @@ static int __init ezkit_init(void) arch_initcall(ezkit_init); +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h index aa6579a64a2..704d9253e41 100644 --- a/arch/blackfin/mach-bf527/include/mach/irq.h +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -151,7 +151,17 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PH15+1) +#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ + +#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 4adceb0bdb6..175371af069 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -206,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 16, @@ -257,21 +257,50 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -394,7 +423,9 @@ static struct platform_device *h8606_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) @@ -424,3 +455,18 @@ static int __init H8606_init(void) } arch_initcall(H8606_init); + +static struct platform_device *H8606_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(H8606_early_devices, + ARRAY_SIZE(H8606_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index b580884848d..842b4fa76ea 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -195,21 +195,50 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -241,16 +270,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -344,7 +432,9 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -354,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -392,3 +486,27 @@ static int __init blackstamp_init(void) } arch_initcall(blackstamp_init); + +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 7fc3b860d4a..fdcde61906d 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -110,7 +110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -242,21 +242,50 @@ static struct platform_device smsc911x_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -288,16 +317,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { @@ -432,7 +520,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_dpmc, #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -442,9 +532,13 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -486,3 +580,27 @@ static int __init cm_bf533_init(void) } arch_initcall(cm_bf533_init); + +static struct platform_device *cm_bf533_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf533_early_devices, + ARRAY_SIZE(cm_bf533_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index d4689dcc198..739773cb7fc 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -261,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -320,21 +320,50 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -444,6 +473,30 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, @@ -471,7 +524,9 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -487,6 +542,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif }; static int __init ezkit_init(void) @@ -500,3 +567,18 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 8ec42ba35b9..7349970db97 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -19,6 +19,7 @@ #include <linux/usb/isp1362.h> #endif #include <asm/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -143,21 +144,50 @@ static struct platform_device spi_bfin_master_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -241,7 +271,9 @@ static struct platform_device *ip0x_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -276,3 +308,18 @@ static int __init ip0x_init(void) } arch_initcall(ip0x_init); + +static struct platform_device *ip0x_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ip0x_early_devices, + ARRAY_SIZE(ip0x_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 6d68dcfa2da..c457eaa6023 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -184,7 +184,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -251,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -322,21 +322,50 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -368,16 +397,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -474,6 +562,30 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, @@ -495,7 +607,9 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -505,9 +619,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -520,6 +638,18 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) &stamp_flash_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif }; static int __init stamp_init(void) @@ -548,6 +678,30 @@ static int __init stamp_init(void) arch_initcall(stamp_init); +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround pull up on cpld / flash pin not being strong enough */ diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h index c31498be0bb..1f7e9765d95 100644 --- a/arch/blackfin/mach-bf533/include/mach/irq.h +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -104,7 +104,8 @@ Core Emulation ** #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PF15+1) +#define NR_MACH_IRQS (IRQ_PF15 + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index c85f4d77053..d35fc5fe4c2 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -112,7 +112,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = { #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, { @@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = { #endif }; +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + static struct platform_device bfin_uart0_device = { .name = "bfin-uart", .id = 0, .num_resources = ARRAY_SIZE(bfin_uart0_resources), .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, { @@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = { #endif }; +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, .num_resources = ARRAY_SIZE(bfin_uart1_resources), .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif #endif @@ -512,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -633,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, @@ -683,6 +760,33 @@ static int __init cm_bf537e_init(void) arch_initcall(cm_bf537e_init); +static struct platform_device *cm_bf537e_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537e_early_devices, + ARRAY_SIZE(cm_bf537e_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index ea11aa81340..d464ad5b72b 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -423,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -522,7 +649,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -539,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, @@ -589,6 +725,33 @@ static int __init cm_bf537u_init(void) arch_initcall(cm_bf537u_init); +static struct platform_device *cm_bf537u_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537u_early_devices, + ARRAY_SIZE(cm_bf537u_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 0da92725270..c489d602c59 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -211,25 +211,93 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -309,16 +377,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif static struct platform_device *minotaur_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -343,7 +470,12 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -360,9 +492,13 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif }; @@ -380,6 +516,33 @@ static int __init minotaur_init(void) arch_initcall(minotaur_init); +static struct platform_device *minotaur_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(minotaur_early_devices, + ARRAY_SIZE(minotaur_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 4e0afda472a..812e8f99160 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -17,7 +17,6 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> -#include <linux/usb/sl811.h> #include <linux/spi/ad7877.h> @@ -99,51 +98,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -221,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -284,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -362,25 +316,93 @@ static struct platform_device bfin_fb_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -446,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = { &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -472,7 +490,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -498,6 +521,24 @@ static int __init pnav_init(void) arch_initcall(pnav_init); +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ac9b52e0087..9eaf5b05c11 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -20,10 +20,12 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif +#include <linux/i2c.h> +#include <linux/i2c/adp5588.h> +#include <linux/etherdevice.h> #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/i2c.h> #include <linux/usb/sl811.h> #include <linux/spi/mmc_spi.h> #include <linux/leds.h> @@ -33,6 +35,14 @@ #include <asm/reboot.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#ifdef CONFIG_REGULATOR_ADP_SWITCH +#include <linux/regulator/adp_switch.h> +#endif +#ifdef CONFIG_REGULATOR_AD5398 +#include <linux/regulator/ad5398.h> +#endif +#include <linux/regulator/consumer.h> +#include <linux/regulator/userspace-consumer.h> /* * Name the Board for the /proc/cpuinfo @@ -208,8 +218,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, + .start = IRQ_PF4, + .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -454,6 +464,9 @@ static struct physmap_flash_data stamp_flash_data = { .width = 2, .parts = stamp_partitions, .nr_parts = ARRAY_SIZE(stamp_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif }; static struct resource stamp_flash_resource = { @@ -515,20 +528,19 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) static struct bfin5xx_spi_chip ad1938_spi_chip_info = { .enable_dma = 0, .bits_per_word = 8, - .cs_gpio = GPIO_PF5, }; #endif @@ -644,6 +656,42 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { }; #endif +#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) +unsigned short ad2s120x_platform_data[] = { + /* used as SAMPLE and RDVEL */ + GPIO_PF5, GPIO_PF6, 0 +}; + +static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +unsigned short ad2s1210_platform_data[] = { + /* use as SAMPLE, A0, A1 */ + GPIO_PF7, GPIO_PF8, GPIO_PF9, +# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT) + /* the RES0 and RES1 pins */ + GPIO_PF4, GPIO_PF5, +# endif + 0, +}; + +static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 @@ -686,11 +734,11 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { .y_plate_ohms = 486, .pressure_max = 1000, .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, }; #endif @@ -701,13 +749,13 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ .pressure_max = 10000, .pressure_min = 0, - .first_conversion_delay = 3, /* wait 512us before do a first conversion */ - .acquisition_time = 1, /* 4us acquisition time per sample */ + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ .median = 2, /* do 8 measurements */ - .averaging = 1, /* take the average of 4 middle samples */ - .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif @@ -742,6 +790,11 @@ static const struct adxl34x_platform_data adxl34x_info = { /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, }; #endif @@ -813,6 +866,35 @@ static struct adf702x_platform_data adf7021_platform_data = { .adf702x_regs = adf7021_regs, .tx_reg = TXREG, }; +static inline void adf702x_mac_init(void) +{ + random_ether_addr(adf7021_platform_data.mac_addr); +} +#else +static inline void adf702x_mac_init(void) {} +#endif + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include <linux/spi/ads7846.h> +static struct bfin5xx_spi_chip ad7873_spi_chip_info = { + .bits_per_word = 8, +}; + +static int ads7873_get_pendown_state(void) +{ + return gpio_get_value(GPIO_PF6); +} + +static struct ads7846_platform_data __initdata ad7873_pdata = { + .model = 7873, /* AD7873 */ + .x_max = 0xfff, + .y_max = 0xfff, + .x_plate_ohms = 620, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7873_get_pendown_state, +}; #endif #if defined(CONFIG_MTD_DATAFLASH) \ @@ -893,24 +975,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */ + .platform_data = "ad1836", /* only includes chip name for the moment */ .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) { - .modalias = "ad1938", + .modalias = "ad193x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */ + .chip_select = 5, .controller_data = &ad1938_spi_chip_info, .mode = SPI_MODE_3, }, @@ -929,6 +1012,37 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) + { + .modalias = "ad2s90", + .bus_num = 0, + .chip_select = 3, /* change it for your board */ + .platform_data = NULL, + .controller_data = &ad2s90_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) + { + .modalias = "ad2s120x", + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s120x_platform_data, + .controller_data = &ad2s120x_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) + { + .modalias = "ad2s1210", + .max_speed_hz = 8192000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s1210_platform_data, + .controller_data = &ad2s1210_spi_chip_info, + }, +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", @@ -1016,7 +1130,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif - +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .irq = IRQ_PF6, + .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ + .controller_data = &ad7873_spi_chip_info, + .platform_data = &ad7873_pdata, + .mode = SPI_MODE_0, + }, +#endif }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -1132,9 +1257,10 @@ static struct platform_device bfin_fb_device = { #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 0, /* let something else control the LCD Blacklight */ - .gpio_bl = GPIO_PF7, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, }; static struct resource bfin_lq035q1_resources[] = { @@ -1148,8 +1274,8 @@ static struct resource bfin_lq035q1_resources[] = { static struct platform_device bfin_lq035q1_device = { .name = "bfin-lq035q1", .id = -1, - .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), - .resource = bfin_lq035q1_resources, + .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), + .resource = bfin_lq035q1_resources, .dev = { .platform_data = &bfin_lq035q1_data, }, @@ -1157,30 +1283,105 @@ static struct platform_device bfin_lq035q1_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin */ + .start = GPIO_PG7, + .end = GPIO_PG7, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PG6, + .end = GPIO_PG6, + .flags = IORESOURCE_IO, + }, +#endif +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -1260,7 +1461,6 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) -#include <linux/i2c/adp5588.h> static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, [1] = KEY_1, @@ -1457,7 +1657,6 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) -#include <linux/i2c/adp5588.h> static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, @@ -1516,6 +1715,101 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif +#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#include <linux/i2c/adp8860.h> +static struct led_info adp8860_leds[] = { + { + .name = "adp8860-led7", + .default_trigger = "none", + .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms, + }, +}; + +static struct adp8860_backlight_platform_data adp8860_pdata = { + .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 | + ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */ + + .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8860_leds, + .num_leds = ARRAY_SIZE(adp8860_leds), + .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8860_FADE_T_600ms, + .led_fade_out = ADP8860_FADE_T_600ms, + .led_on_time = ADP8860_LED_ONT_200ms, +}; +#endif + +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +static struct regulator_consumer_supply ad5398_consumer = { + .supply = "current", +}; + +static struct regulator_init_data ad5398_regulator_data = { + .constraints = { + .name = "current range", + .max_uA = 120000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ad5398_consumer, +}; + +static struct ad5398_platform_data ad5398_i2c_platform_data = { + .current_bits = 10, + .current_offset = 4, + .regulator_data = &ad5398_regulator_data, +}; + +#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ + defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +static struct platform_device ad5398_virt_consumer_device = { + .name = "reg-virt-consumer", + .id = 0, + .dev = { + .platform_data = "current", /* Passed to driver */ + }, +}; +#endif +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +static struct regulator_bulk_data ad5398_bulk_data = { + .supply = "current", +}; + +static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = { + .name = "ad5398", + .num_supplies = 1, + .supplies = &ad5398_bulk_data, +}; + +static struct platform_device ad5398_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &ad5398_userspace_comsumer_data, + }, +}; +#endif +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) { @@ -1524,6 +1818,52 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&ad7142_i2c_platform_data, }, #endif + +#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE) + { + I2C_BOARD_INFO("ad7150", 0x48), + .irq = IRQ_PG5, /* fixme: use real interrupt number */ + }, +#endif + +#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE) + { + I2C_BOARD_INFO("ad7152", 0x48), + }, +#endif + +#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE) + { + I2C_BOARD_INFO("ad774x", 0x48), + }, +#endif + +#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE) + { + I2C_BOARD_INFO("ad7414", 0x9), + .irq = IRQ_PG5, + /* + * platform_data pointer is borrwoed by the driver to + * store custimer defined IRQ ALART level mode. + * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. + */ + .platform_data = (void *)IRQF_TRIGGER_LOW, + }, +#endif + +#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE) + { + I2C_BOARD_INFO("ad7417", 0xb), + .irq = IRQ_PG5, + /* + * platform_data pointer is borrwoed by the driver to + * store custimer defined IRQ ALART level mode. + * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. + */ + .platform_data = (void *)IRQF_TRIGGER_LOW, + }, +#endif + #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), @@ -1595,24 +1935,105 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("adau1761", 0x38), }, #endif +#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE) + { + I2C_BOARD_INFO("adau1361", 0x38), + }, +#endif #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) { I2C_BOARD_INFO("ad5258", 0x18), }, #endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) + { + I2C_BOARD_INFO("ad5398", 0xC), + .platform_data = (void *)&ad5398_i2c_platform_data, + }, +#endif +#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) + { + I2C_BOARD_INFO("adp8860", 0x2A), + .platform_data = (void *)&adp8860_pdata, + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE @@ -1701,13 +2122,121 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) static struct platform_device bfin_tdm = { .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, /* TODO: add platform data here */ }; #endif +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE) +#define REGULATOR_ADP122 "adp122" +#define REGULATOR_ADP150 "adp150" + +static struct regulator_consumer_supply adp122_consumers = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_consumer_supply adp150_consumers = { + .supply = REGULATOR_ADP150, +}; + +static struct regulator_init_data adp_switch_regulator_data[] = { + { + .constraints = { + .name = REGULATOR_ADP122, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uA = 0, + .max_uA = 300000, + }, + .num_consumer_supplies = 1, /* only 1 */ + .consumer_supplies = &adp122_consumers, + .driver_data = (void *)GPIO_PF2, /* gpio port only */ + }, + { + .constraints = { + .name = REGULATOR_ADP150, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uA = 0, + .max_uA = 150000, + }, + .num_consumer_supplies = 1, /* only 1 */ + .consumer_supplies = &adp150_consumers, + .driver_data = (void *)GPIO_PF3, /* gpio port only */ + }, +}; + +static struct adp_switch_platform_data adp_switch_pdata = { + .regulator_num = ARRAY_SIZE(adp_switch_regulator_data), + .regulator_data = adp_switch_regulator_data, +}; + +static struct platform_device adp_switch_device = { + .name = "adp_switch", + .id = 0, + .dev = { + .platform_data = &adp_switch_pdata, + }, +}; + +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +static struct regulator_bulk_data adp122_bulk_data = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = { + .name = REGULATOR_ADP122, + .num_supplies = 1, + .supplies = &adp122_bulk_data, +}; + +static struct platform_device adp122_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &adp122_userspace_comsumer_data, + }, +}; + +static struct regulator_bulk_data adp150_bulk_data = { + .supply = REGULATOR_ADP150, +}; + +static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = { + .name = REGULATOR_ADP150, + .num_supplies = 1, + .supplies = &adp150_bulk_data, +}; + +static struct platform_device adp150_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 1, + .dev = { + .platform_data = &adp150_userspace_comsumer_data, + }, +}; +#endif +#endif + + static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, @@ -1771,7 +2300,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -1788,9 +2322,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, @@ -1808,18 +2346,46 @@ static struct platform_device *stamp_devices[] __initdata = { &stamp_flash_device, #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) &bfin_tdm, #endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ + defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) + &ad5398_virt_consumer_device, +#endif +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) + &ad5398_userspace_consumer_device, +#endif +#endif + +#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE) + &adp_switch_device, +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) + &adp122_userspace_consumer_device, + &adp150_userspace_consumer_device, +#endif +#endif }; static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - i2c_register_board_info(0, bfin_i2c_board_info, - ARRAY_SIZE(bfin_i2c_board_info)); bfin_plat_nand_init(); + adf702x_mac_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; @@ -1827,6 +2393,34 @@ static int __init stamp_init(void) arch_initcall(stamp_init); + +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 57163b65a4f..4f0a2e72ce4 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -425,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -524,7 +651,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -541,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, @@ -591,6 +727,33 @@ static int __init tcm_bf537_init(void) arch_initcall(tcm_bf537_init); +static struct platform_device *cm_bf537_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537_early_devices, + ARRAY_SIZE(cm_bf537_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h index 0defa9457e7..789a4f226f7 100644 --- a/arch/blackfin/mach-bf537/include/mach/irq.h +++ b/arch/blackfin/mach-bf537/include/mach/irq.h @@ -134,7 +134,17 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PH15+1) +#define IRQ_MAC_PHYINT 98 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 99 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 100 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 101 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 102 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 103 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 104 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 105 /* Station Mgt. Transfer Done Interrupt */ + +#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index c296bb1ed50..1a1f65855b0 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -41,37 +41,148 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin */ + .start = GPIO_PG7, + .end = GPIO_PG7, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PG6, + .end = GPIO_PG6, + .flags = IORESOURCE_IO, + }, +#endif +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART2 +static struct resource bfin_uart2_resources[] = { { - .start = 0xFFC02100, - .end = 0xFFC021FF, + .start = UART2_THR, + .end = UART2_GCTL+2, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART2_ERROR, + .end = IRQ_UART2_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_TX, + .end = CH_UART2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart2_peripherals[] = { + P_UART2_TX, P_UART2_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart2_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_uart2_resources), + .resource = bfin_uart2_resources, + .dev = { + .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -151,6 +262,145 @@ static struct platform_device bfin_sir2_device = { #endif #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -268,8 +518,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif @@ -284,9 +534,10 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = { #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 0, /* let something else control the LCD Blacklight */ - .gpio_bl = GPIO_PF7, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, }; static struct resource bfin_lq035q1_resources[] = { @@ -622,7 +873,15 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -648,6 +907,21 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) &bfin_can_device, #endif @@ -683,3 +957,39 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h index a4b7fcbc556..7a479d224dc 100644 --- a/arch/blackfin/mach-bf538/include/mach/irq.h +++ b/arch/blackfin/mach-bf538/include/mach/irq.h @@ -110,7 +110,8 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PF15+1) +#define NR_MACH_IRQS (IRQ_PF15 + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index ccdcd6da2e9..f60c333fec6 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -127,44 +127,211 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_DLL, + .end = UART0_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_DLL, + .end = UART1_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PE10, + .end = GPIO_PE10, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PE9, + .end = GPIO_PE9, + .flags = IORESOURCE_IO, + }, +#endif +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, +#ifdef CONFIG_BFIN_UART1_CTSRTS + P_UART1_RTS, P_UART1_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART2 +static struct resource bfin_uart2_resources[] = { { - .start = 0xFFC02100, - .end = 0xFFC021FF, + .start = UART2_DLL, + .end = UART2_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART2_ERROR, + .end = IRQ_UART2_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_TX, + .end = CH_UART2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart2_peripherals[] = { + P_UART2_TX, P_UART2_RX, 0 +}; + +static struct platform_device bfin_uart2_device = { + .name = "bfin-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_uart2_resources), + .resource = bfin_uart2_resources, + .dev = { + .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART3 +static struct resource bfin_uart3_resources[] = { { - .start = 0xFFC03100, - .end = 0xFFC031FF, + .start = UART3_DLL, + .end = UART3_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART3_RX, + .end = IRQ_UART3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART3_ERROR, + .end = IRQ_UART3_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART3_TX, + .end = CH_UART3_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART3_RX, + .end = CH_UART3_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART3_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PB3, + .end = GPIO_PB3, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PB2, + .end = GPIO_PB2, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart3_peripherals[] = { + P_UART3_TX, P_UART3_RX, +#ifdef CONFIG_BFIN_UART3_CTSRTS + P_UART3_RTS, P_UART3_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart3_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_uart3_resources), + .resource = bfin_uart3_resources, + .dev = { + .platform_data = &bfin_uart3_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -359,6 +526,145 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -752,7 +1058,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -782,6 +1099,21 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &musb_device, #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) &bfin_atapi_device, #endif @@ -833,3 +1165,42 @@ static int __init cm_bf548_init(void) } arch_initcall(cm_bf548_init); + +static struct platform_device *cm_bf548_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf548_early_devices, + ARRAY_SIZE(cm_bf548_early_devices)); +} diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 60193f72777..06919db00a7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -232,44 +232,211 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_DLL, + .end = UART0_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_DLL, + .end = UART1_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PE10, + .end = GPIO_PE10, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PE9, + .end = GPIO_PE9, + .flags = IORESOURCE_IO, + }, +#endif +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, +#ifdef CONFIG_BFIN_UART1_CTSRTS + P_UART1_RTS, P_UART1_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART2 +static struct resource bfin_uart2_resources[] = { { - .start = 0xFFC02100, - .end = 0xFFC021FF, + .start = UART2_DLL, + .end = UART2_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART2_ERROR, + .end = IRQ_UART2_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_TX, + .end = CH_UART2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart2_peripherals[] = { + P_UART2_TX, P_UART2_RX, 0 +}; + +static struct platform_device bfin_uart2_device = { + .name = "bfin-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_uart2_resources), + .resource = bfin_uart2_resources, + .dev = { + .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART3 +static struct resource bfin_uart3_resources[] = { { - .start = 0xFFC03100, - .end = 0xFFC031FF, + .start = UART3_DLL, + .end = UART3_RBR+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART3_RX, + .end = IRQ_UART3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART3_ERROR, + .end = IRQ_UART3_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART3_TX, + .end = CH_UART3_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART3_RX, + .end = CH_UART3_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART3_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PB3, + .end = GPIO_PB3, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PB2, + .end = GPIO_PB2, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart3_peripherals[] = { + P_UART3_TX, P_UART3_RX, +#ifdef CONFIG_BFIN_UART3_CTSRTS + P_UART3_RTS, P_UART3_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart3_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_uart3_resources), + .resource = bfin_uart3_resources, + .dev = { + .platform_data = &bfin_uart3_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -464,6 +631,145 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -657,8 +963,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -714,8 +1020,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -951,6 +1257,30 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, @@ -960,7 +1290,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -994,6 +1335,21 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_isp1760_device, #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) &bfin_can_device, #endif @@ -1037,6 +1393,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif }; static int __init ezkit_init(void) @@ -1058,3 +1426,42 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 106db05684a..1f99b51a3d5 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -317,7 +317,8 @@ Events (highest priority) EMU 0 #define GPIO_IRQ_BASE IRQ_PA0 -#define NR_IRQS (IRQ_PJ15+1) +#define NR_MACH_IRQS (IRQ_PJ15 + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) /* For compatibility reasons with existing code */ diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile index 59e18afe28c..b3402971831 100644 --- a/arch/blackfin/mach-bf561/Makefile +++ b/arch/blackfin/mach-bf561/Makefile @@ -6,3 +6,4 @@ obj-y := ints-priority.o dma.o obj-$(CONFIG_BF561_COREB) += coreb.o obj-$(CONFIG_SMP) += smp.o secondary.o atomic.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 07e8dc8770d..5163e2c383c 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -176,7 +176,7 @@ static struct resource smsc911x_resources[] = { }; static struct smsc911x_platform_config smsc911x_config = { - .flags = SMSC911X_USE_32BIT, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index dfc8d5b7798..e127aedc1d7 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -111,7 +111,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -516,3 +547,18 @@ static int __init cm_bf561_init(void) } arch_initcall(cm_bf561_init); + +static struct platform_device *cm_bf561_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf561_early_devices, + ARRAY_SIZE(cm_bf561_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index ffd3e6a80d1..9b93e2f9579 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -160,21 +160,50 @@ static struct platform_device smc91x_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_uart_device = { +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -245,8 +274,8 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -299,8 +328,8 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -458,3 +489,18 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 8ba7252455e..d3017e53686 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -42,6 +42,52 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { @@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = { static struct platform_device *tepla_devices[] __initdata = { &smc91x_device, + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, @@ -87,3 +140,18 @@ static int __init tepla_init(void) } arch_initcall(tepla_init); + +static struct platform_device *tepla_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(tepla_early_devices, + ARRAY_SIZE(tepla_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/hotplug.c b/arch/blackfin/mach-bf561/hotplug.c new file mode 100644 index 00000000000..c95169b612d --- /dev/null +++ b/arch/blackfin/mach-bf561/hotplug.c @@ -0,0 +1,32 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * Graff Yang <graf.yang@analog.com> + * + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> +#include <asm/smp.h> +#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) + +int hotplug_coreb; + +void platform_cpu_die(void) +{ + unsigned long iwr[2] = {0, 0}; + unsigned long bank = SIC_SYSIRQ(IRQ_SUPPLE_0) / 32; + unsigned long bit = 1 << (SIC_SYSIRQ(IRQ_SUPPLE_0) % 32); + + hotplug_coreb = 1; + + iwr[bank] = bit; + + /* disable core timer */ + bfin_write_TCNTL(0); + + /* clear ipi interrupt IRQ_SUPPLE_0 */ + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1))); + SSYNC(); + + coreb_sleep(iwr[0], iwr[1], 0); +} diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h index 7b208db267b..c95566ade51 100644 --- a/arch/blackfin/mach-bf561/include/mach/irq.h +++ b/arch/blackfin/mach-bf561/include/mach/irq.h @@ -265,7 +265,8 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#define NR_IRQS (IRQ_PF47 + 1) +#define NR_MACH_IRQS (IRQ_PF47 + 1) +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #define IVG7 7 #define IVG8 8 diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h index 390c7f4ae7b..2c8c514dd38 100644 --- a/arch/blackfin/mach-bf561/include/mach/smp.h +++ b/arch/blackfin/mach-bf561/include/mach/smp.h @@ -25,4 +25,6 @@ void platform_send_ipi_cpu(unsigned int cpu); void platform_clear_ipi(unsigned int cpu); +void bfin_local_timer_setup(void); + #endif /* !_MACH_BF561_SMP */ diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S index 8e6050369c0..4624eebbf9c 100644 --- a/arch/blackfin/mach-bf561/secondary.S +++ b/arch/blackfin/mach-bf561/secondary.S @@ -11,6 +11,7 @@ #include <linux/init.h> #include <asm/blackfin.h> #include <asm/asm-offsets.h> +#include <asm/trace.h> __INIT @@ -62,6 +63,8 @@ ENTRY(_coreb_trampoline_start) M2 = r0; M3 = r0; + trace_buffer_init(p0,r0); + /* Turn off the icache */ p0.l = LO(IMEM_CONTROL); p0.h = HI(IMEM_CONTROL); @@ -159,6 +162,41 @@ ENTRY(_coreb_trampoline_start) ENDPROC(_coreb_trampoline_start) ENTRY(_coreb_trampoline_end) +.section ".text" +ENTRY(_set_sicb_iwr) + P0.H = hi(SICB_IWR0); + P0.L = lo(SICB_IWR0); + P1.H = hi(SICB_IWR1); + P1.L = lo(SICB_IWR1); + [P0] = R0; + [P1] = R1; + SSYNC; + RTS; +ENDPROC(_set_sicb_iwr) + +ENTRY(_coreb_sleep) + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + + call _set_sicb_iwr; + + CLI R2; + SSYNC; + IDLE; + STI R2; + + R0 = IWR_DISABLE_ALL; + R1 = IWR_DISABLE_ALL; + call _set_sicb_iwr; + + p0.h = hi(COREB_L1_CODE_START); + p0.l = lo(COREB_L1_CODE_START); + jump (p0); +ENDPROC(_coreb_sleep) + +__CPUINIT ENTRY(_coreb_start) [--sp] = reti; @@ -176,12 +214,20 @@ ENTRY(_coreb_start) sp = [p0]; usp = sp; fp = sp; +#ifdef CONFIG_HOTPLUG_CPU + p0.l = _hotplug_coreb; + p0.h = _hotplug_coreb; + r0 = [p0]; + cc = BITTST(r0, 0); + if cc jump 3f; +#endif sp += -12; call _init_pda sp += 12; +#ifdef CONFIG_HOTPLUG_CPU +3: +#endif call _secondary_start_kernel; .L_exit: jump.s .L_exit; ENDPROC(_coreb_start) - -__FINIT diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 0192532e96a..3b9a4bf7dac 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -11,11 +11,10 @@ #include <linux/delay.h> #include <asm/smp.h> #include <asm/dma.h> +#include <asm/time.h> static DEFINE_SPINLOCK(boot_lock); -static cpumask_t cpu_callin_map; - /* * platform_init_cpus() - Tell the world about how many cores we * have. This is called while setting up the architecture support @@ -66,13 +65,15 @@ void __cpuinit platform_secondary_init(unsigned int cpu) bfin_write_SICB_IAR5(bfin_read_SICA_IAR5()); bfin_write_SICB_IAR6(bfin_read_SICA_IAR6()); bfin_write_SICB_IAR7(bfin_read_SICA_IAR7()); + bfin_write_SICB_IWR0(IWR_DISABLE_ALL); + bfin_write_SICB_IWR1(IWR_DISABLE_ALL); SSYNC(); /* Store CPU-private information to the cpu_data array. */ bfin_setup_cpudata(cpu); /* We are done with local CPU inits, unblock the boot CPU. */ - cpu_set(cpu, cpu_callin_map); + set_cpu_online(cpu, true); spin_lock(&boot_lock); spin_unlock(&boot_lock); } @@ -81,28 +82,28 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle { unsigned long timeout; - /* CoreB already running?! */ - BUG_ON((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0); - printk(KERN_INFO "Booting Core B.\n"); spin_lock(&boot_lock); - /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */ - SSYNC(); - bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT); - SSYNC(); + if ((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0) { + /* CoreB already running, sending ipi to wakeup it */ + platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0); + } else { + /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */ + bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT); + SSYNC(); + } timeout = jiffies + 1 * HZ; while (time_before(jiffies, timeout)) { - if (cpu_isset(cpu, cpu_callin_map)) + if (cpu_online(cpu)) break; udelay(100); barrier(); } - if (cpu_isset(cpu, cpu_callin_map)) { - cpu_set(cpu, cpu_online_map); + if (cpu_online(cpu)) { /* release the lock and let coreb run */ spin_unlock(&boot_lock); return 0; @@ -147,3 +148,20 @@ void platform_clear_ipi(unsigned int cpu) bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + cpu))); SSYNC(); } + +/* + * Setup core B's local core timer. + * In SMP, core timer is used for clock event device. + */ +void __cpuinit bfin_local_timer_setup(void) +{ +#if defined(CONFIG_TICKSOURCE_CORETMR) + bfin_coretmr_init(); + bfin_coretmr_clockevent_init(); + get_irq_chip(IRQ_CORETMR)->unmask(IRQ_CORETMR); +#else + /* Power down the core timer, just to play safe. */ + bfin_write_TCNTL(0); +#endif + +} diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 77758289725..4391d03dc84 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -11,10 +11,13 @@ #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/fs.h> +#include <linux/delay.h> #include <asm/blackfin.h> #include <asm/time.h> #include <asm/dpmc.h> +#define CPUFREQ_CPU 0 + /* this is the table of CCLK frequencies, in Hz */ /* .index is the entry in the auxillary dpm_state_table[] */ static struct cpufreq_frequency_table bfin_freq_table[] = { @@ -41,64 +44,124 @@ static struct bfin_dpm_state { unsigned int tscale; /* change the divider on the core timer interrupt */ } dpm_state_table[3]; +#if defined(CONFIG_CYCLES_CLOCKSOURCE) /* - normalized to maximum frequncy offset for CYCLES, - used in time-ts cycles clock source, but could be used - somewhere also. + * normalized to maximum frequncy offset for CYCLES, + * used in time-ts cycles clock source, but could be used + * somewhere also. */ unsigned long long __bfin_cycles_off; unsigned int __bfin_cycles_mod; +#endif /**************************************************************************/ +static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) +{ -static unsigned int bfin_getfreq_khz(unsigned int cpu) + unsigned long csel, min_cclk; + int index; + + /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ + dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; + + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + return; +} + +static void bfin_adjust_core_timer(void *info) { - /* The driver only support single cpu */ - if (cpu != 0) - return -1; + unsigned int tscale; + unsigned int index = *(unsigned int *)info; - return get_cclk() / 1000; + /* we have to adjust the core timer, because it is using cclk */ + tscale = dpm_state_table[index].tscale; + bfin_write_TSCALE(tscale); + return; } +static unsigned int bfin_getfreq_khz(unsigned int cpu) +{ + /* Both CoreA/B have the same core clock */ + return get_cclk() / 1000; +} -static int bfin_target(struct cpufreq_policy *policy, +static int bfin_target(struct cpufreq_policy *poli, unsigned int target_freq, unsigned int relation) { - unsigned int index, plldiv, tscale; + unsigned int index, plldiv, cpu; unsigned long flags, cclk_hz; struct cpufreq_freqs freqs; + static unsigned long lpj_ref; + static unsigned int lpj_ref_freq; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) cycles_t cycles; +#endif - if (cpufreq_frequency_table_target(policy, bfin_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; - freqs.cpu = 0; - - pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save_hw(flags); - plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; - tscale = dpm_state_table[index].tscale; - bfin_write_PLL_DIV(plldiv); - /* we have to adjust the core timer, because it is using cclk */ - bfin_write_TSCALE(tscale); - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; - local_irq_restore_hw(flags); - /* TODO: just test case for cycles clock source, remove later */ - pr_debug("cpufreq: done\n"); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + for_each_online_cpu(cpu) { + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + + if (!policy) + continue; + + if (cpufreq_frequency_table_target(policy, bfin_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + cclk_hz = bfin_freq_table[index].frequency; + + freqs.old = bfin_getfreq_khz(0); + freqs.new = cclk_hz; + freqs.cpu = cpu; + + pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", + cclk_hz, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (cpu == CPUFREQ_CPU) { + local_irq_save_hw(flags); + plldiv = (bfin_read_PLL_DIV() & SSEL) | + dpm_state_table[index].csel; + bfin_write_PLL_DIV(plldiv); + on_each_cpu(bfin_adjust_core_timer, &index, 1); +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles = get_cycles(); + SSYNC(); + cycles += 10; /* ~10 cycles we lose after get_cycles() */ + __bfin_cycles_off += + (cycles << __bfin_cycles_mod) - (cycles << index); + __bfin_cycles_mod = index; +#endif + if (!lpj_ref_freq) { + lpj_ref = loops_per_jiffy; + lpj_ref_freq = freqs.old; + } + if (freqs.new != freqs.old) { + loops_per_jiffy = cpufreq_scale(lpj_ref, + lpj_ref_freq, freqs.new); + } + local_irq_restore_hw(flags); + } + /* TODO: just test case for cycles clock source, remove later */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + pr_debug("cpufreq: done\n"); return 0; } @@ -110,37 +173,16 @@ static int bfin_verify_speed(struct cpufreq_policy *policy) static int __init __bfin_cpu_init(struct cpufreq_policy *policy) { - unsigned long cclk, sclk, csel, min_cclk; - int index; - - if (policy->cpu != 0) - return -EINVAL; + unsigned long cclk, sclk; cclk = get_cclk() / 1000; sclk = get_sclk() / 1000; -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ - dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } + if (policy->cpu == CPUFREQ_CPU) + bfin_init_tables(cclk, sclk); policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - /*Now ,only support one cpu */ policy->cur = cclk; cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 01b2f58dfb9..a5847f5d67c 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -405,7 +405,7 @@ ENTRY(_double_fault) r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _double_fault_c; + pseudo_long_call _double_fault_c, p5; SP += 12; .L_double_fault_panic: JUMP .L_double_fault_panic @@ -447,7 +447,7 @@ ENTRY(_exception_to_level5) r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _trap_c; + pseudo_long_call _trap_c, p4; SP += 12; /* If interrupts were off during the exception (IPEND[4] = 1), turn them off @@ -482,6 +482,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ [--sp] = ASTAT; [--sp] = (R7:6,P5:4); + ANOMALY_283_315_WORKAROUND(p5, r7) + #ifdef CONFIG_EXACT_HWERR /* Make sure all pending read/writes complete. This will ensure any * accesses which could cause hardware errors completes, and signal @@ -492,8 +494,6 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ ssync; #endif - ANOMALY_283_315_WORKAROUND(p5, r7) - #ifdef CONFIG_DEBUG_DOUBLEFAULT /* * Save these registers, as they are only valid in exception context @@ -551,7 +551,7 @@ ENTRY(_kernel_execve) p0 = sp; sp += -16; [sp + 12] = p0; - call _do_execve; + pseudo_long_call _do_execve, p5; SP += 16; cc = r0 == 0; if ! cc jump .Lexecve_failed; @@ -626,13 +626,6 @@ ENTRY(_system_call) p0 = [sp + PT_ORIG_P0]; #endif /* CONFIG_IPIPE */ - /* Check the System Call */ - r7 = __NR_syscall; - /* System call number is passed in P0 */ - r6 = p0; - cc = r6 < r7; - if ! cc jump .Lbadsys; - /* are we tracing syscalls?*/ r7 = sp; r6.l = lo(ALIGN_PAGE_MASK); @@ -642,6 +635,14 @@ ENTRY(_system_call) r7 = [p2+TI_FLAGS]; CC = BITTST(r7,TIF_SYSCALL_TRACE); if CC JUMP _sys_trace; + CC = BITTST(r7,TIF_SINGLESTEP); + if CC JUMP _sys_trace; + + /* Make sure the system call # is valid */ + p4 = __NR_syscall; + /* System call number is passed in P0 */ + cc = p4 <= p0; + if cc jump .Lbadsys; /* Execute the appropriate system call */ @@ -704,7 +705,7 @@ ENTRY(_system_call) sp += 4; SP += -12; - call _schedule; + pseudo_long_call _schedule, p4; SP += 12; jump .Lresume_userspace_1; @@ -723,7 +724,7 @@ ENTRY(_system_call) r0 = sp; SP += -12; - call _do_notify_resume; + pseudo_long_call _do_notify_resume, p5; SP += 12; .Lsyscall_really_exit: @@ -736,11 +737,17 @@ ENDPROC(_system_call) * this symbol need not be global anyways, so ... */ _sys_trace: - call _syscall_trace; - - /* Execute the appropriate system call */ + r0 = sp; + pseudo_long_call _syscall_trace_enter, p5; + /* Make sure the system call # is valid */ p4 = [SP + PT_P0]; + p3 = __NR_syscall; + cc = p3 <= p4; + r0 = -ENOSYS; + if cc jump .Lsys_trace_badsys; + + /* Execute the appropriate system call */ p5.l = _sys_call_table; p5.h = _sys_call_table; p5 = p5 + (p4 << 2); @@ -758,9 +765,11 @@ _sys_trace: SP += -12; call (p5); SP += 24; +.Lsys_trace_badsys: [sp + PT_R0] = r0; - call _syscall_trace; + r0 = sp; + pseudo_long_call _syscall_trace_leave, p5; jump .Lresume_userspace; ENDPROC(_sys_trace) @@ -966,6 +975,13 @@ ENTRY(_evt_evt14) #else cli r0; #endif +#ifdef CONFIG_TRACE_IRQFLAGS + [--sp] = rets; + sp += -12; + call _trace_hardirqs_off; + sp += 12; + rets = [sp++]; +#endif [--sp] = RETI; SP += 4; rts; @@ -989,6 +1005,14 @@ ENTRY(_schedule_and_signal_from_int) p1 = rets; [sp + PT_RESERVED] = p1; +#ifdef CONFIG_TRACE_IRQFLAGS + /* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15 + * is turned on, so disable all irqs. */ + cli r0; + sp += -12; + call _trace_hardirqs_on; + sp += 12; +#endif #ifdef CONFIG_SMP GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */ r0 = [p0 + PDA_IRQFLAGS]; @@ -1007,7 +1031,8 @@ ENTRY(_schedule_and_signal_from_int) r0 = sp; sp += -12; - call _finish_atomic_sections; + + pseudo_long_call _finish_atomic_sections, p5; sp += 12; jump.s .Lresume_userspace; ENDPROC(_schedule_and_signal_from_int) @@ -1357,7 +1382,7 @@ ENTRY(_sys_call_table) .long _sys_newuname .long _sys_ni_syscall /* old sys_modify_ldt */ .long _sys_adjtimex - .long _sys_ni_syscall /* 125 */ /* sys_mprotect */ + .long _sys_mprotect /* 125 */ .long _sys_ni_syscall /* old sys_sigprocmask */ .long _sys_ni_syscall /* old "creat_module" */ .long _sys_init_module @@ -1376,16 +1401,16 @@ ENTRY(_sys_call_table) .long _sys_getdents .long _sys_ni_syscall /* sys_select */ .long _sys_flock - .long _sys_ni_syscall /* sys_msync */ + .long _sys_msync .long _sys_readv /* 145 */ .long _sys_writev .long _sys_getsid .long _sys_fdatasync .long _sys_sysctl - .long _sys_ni_syscall /* 150 */ /* sys_mlock */ - .long _sys_ni_syscall /* sys_munlock */ - .long _sys_ni_syscall /* sys_mlockall */ - .long _sys_ni_syscall /* sys_munlockall */ + .long _sys_mlock /* 150 */ + .long _sys_munlock + .long _sys_mlockall + .long _sys_munlockall .long _sys_sched_setparam .long _sys_sched_getparam /* 155 */ .long _sys_sched_setscheduler @@ -1450,8 +1475,8 @@ ENTRY(_sys_call_table) .long _sys_setfsuid /* 215 */ .long _sys_setfsgid .long _sys_pivot_root - .long _sys_ni_syscall /* sys_mincore */ - .long _sys_ni_syscall /* sys_madvise */ + .long _sys_mincore + .long _sys_madvise .long _sys_getdents64 /* 220 */ .long _sys_fcntl64 .long _sys_ni_syscall /* reserved for TUX */ @@ -1507,7 +1532,7 @@ ENTRY(_sys_call_table) .long _sys_utimes .long _sys_fadvise64_64 .long _sys_ni_syscall /* vserver */ - .long _sys_ni_syscall /* 275, mbind */ + .long _sys_mbind /* 275 */ .long _sys_ni_syscall /* get_mempolicy */ .long _sys_ni_syscall /* set_mempolicy */ .long _sys_mq_open diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index cab0a0031ee..4391621d904 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -144,8 +144,8 @@ ENTRY(__start) #endif /* Initialize stack pointer */ - sp.l = _init_thread_union; - sp.h = _init_thread_union; + sp.l = _init_thread_union + THREAD_SIZE; + sp.h = _init_thread_union + THREAD_SIZE; fp = sp; usp = sp; @@ -186,6 +186,11 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; + +#ifdef CONFIG_ROMKERNEL + call _bfin_relocate_xip_data; +#endif + #ifdef CONFIG_BFIN_KERNEL_CLOCK /* Only use on-chip scratch space for stack when absolutely required * to avoid Anomaly 05000227 ... we know the init_clocks() func only @@ -257,12 +262,7 @@ ENTRY(_real_start) R0 = R7; call _cmdline_init; - /* Load the current thread pointer and stack */ - p1 = THREAD_SIZE + 4 (z); /* +4 is for reti loading */ - sp = sp + p1; - usp = sp; - fp = sp; - sp += -12; + sp += -12 + 4; /* +4 is for reti loading above */ call _init_pda sp += 12; jump.l _start_kernel; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 8085ff1cce0..cee62cf4acd 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -88,6 +88,13 @@ __common_int_entry: #else cli r1; #endif +#ifdef CONFIG_TRACE_IRQFLAGS + [--sp] = r0; + sp += -12; + call _trace_hardirqs_off; + sp += 12; + r0 = [sp++]; +#endif [--sp] = RETI; /* orig_pc */ /* Clear all L registers. */ r1 = 0 (x); @@ -109,10 +116,10 @@ __common_int_entry: cc = r0 == 0; if cc jump .Lcommon_restore_context; #else /* CONFIG_IPIPE */ - call _do_irq; + pseudo_long_call _do_irq, p2; SP += 12; #endif /* CONFIG_IPIPE */ - call _return_from_int; + pseudo_long_call _return_from_int, p2; .Lcommon_restore_context: RESTORE_CONTEXT rti; @@ -168,7 +175,7 @@ ENTRY(_evt_ivhw) r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _trap_c; + pseudo_long_call _trap_c, p5; SP += 12; #ifdef EBIU_ERRMST @@ -179,7 +186,7 @@ ENTRY(_evt_ivhw) w[p0] = r0.l; #endif - call _ret_from_exception; + pseudo_long_call _ret_from_exception, p2; .Lcommon_restore_all_sys: RESTORE_ALL_SYS @@ -187,12 +194,28 @@ ENTRY(_evt_ivhw) ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). - * We don't actually use this, so just return. * For inner circle type details, please see: * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi */ ENTRY(_evt_nmi) +#ifndef CONFIG_NMI_WATCHDOG .weak _evt_nmi +#else + /* Not take account of CPLBs, this handler will not return */ + SAVE_ALL_SYS + r0 = sp; + r1 = retn; + [sp + PT_PC] = r1; + trace_buffer_save(p4,r5); + + ANOMALY_283_315_WORKAROUND(p4, r5) + + SP += -12; + call _do_nmi; + SP += 12; +1: + jump 1b; +#endif rtn; ENDPROC(_evt_nmi) @@ -223,7 +246,7 @@ ENTRY(_evt_system_call) #ifdef CONFIG_FRAME_POINTER fp = 0; #endif - call _system_call; + pseudo_long_call _system_call, p2; jump .Lcommon_restore_context; ENDPROC(_evt_system_call) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1873b2c1fed..7ad8878bfa1 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -28,6 +28,7 @@ #include <asm/dpmc.h> #include <asm/bfin5xx_spi.h> #include <asm/bfin_sport.h> +#include <asm/bfin_can.h> #define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) @@ -172,7 +173,12 @@ static void bfin_internal_mask_irq(unsigned int irq) local_irq_restore_hw(flags); } +#ifdef CONFIG_SMP +static void bfin_internal_unmask_irq_affinity(unsigned int irq, + const struct cpumask *affinity) +#else static void bfin_internal_unmask_irq(unsigned int irq) +#endif { unsigned long flags; @@ -185,16 +191,38 @@ static void bfin_internal_unmask_irq(unsigned int irq) local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; - bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | - (1 << mask_bit)); #ifdef CONFIG_SMP - bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) | - (1 << mask_bit)); + if (cpumask_test_cpu(0, affinity)) +#endif + bfin_write_SIC_IMASK(mask_bank, + bfin_read_SIC_IMASK(mask_bank) | + (1 << mask_bit)); +#ifdef CONFIG_SMP + if (cpumask_test_cpu(1, affinity)) + bfin_write_SICB_IMASK(mask_bank, + bfin_read_SICB_IMASK(mask_bank) | + (1 << mask_bit)); #endif #endif local_irq_restore_hw(flags); } +#ifdef CONFIG_SMP +static void bfin_internal_unmask_irq(unsigned int irq) +{ + struct irq_desc *desc = irq_to_desc(irq); + bfin_internal_unmask_irq_affinity(irq, desc->affinity); +} + +static int bfin_internal_set_affinity(unsigned int irq, const struct cpumask *mask) +{ + bfin_internal_mask_irq(irq); + bfin_internal_unmask_irq_affinity(irq, mask); + + return 0; +} +#endif + #ifdef CONFIG_PM int bfin_internal_set_wake(unsigned int irq, unsigned int state) { @@ -224,11 +252,6 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) wakeup |= USBWE; break; #endif -#ifdef IRQ_KEY - case IRQ_KEY: - wakeup |= KPADWE; - break; -#endif #ifdef CONFIG_BF54x case IRQ_CNT: wakeup |= ROTWE; @@ -270,6 +293,9 @@ static struct irq_chip bfin_internal_irqchip = { .mask_ack = bfin_internal_mask_irq, .disable = bfin_internal_mask_irq, .enable = bfin_internal_unmask_irq, +#ifdef CONFIG_SMP + .set_affinity = bfin_internal_set_affinity, +#endif #ifdef CONFIG_PM .set_wake = bfin_internal_set_wake, #endif @@ -294,7 +320,6 @@ static int error_int_mask; static void bfin_generic_error_mask_irq(unsigned int irq) { error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR)); - if (!error_int_mask) bfin_internal_mask_irq(IRQ_GENERIC_ERROR); } @@ -385,6 +410,127 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, } #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static int mac_stat_int_mask; + +static void bfin_mac_status_ack_irq(unsigned int irq) +{ + switch (irq) { + case IRQ_MAC_MMCINT: + bfin_write_EMAC_MMC_TIRQS( + bfin_read_EMAC_MMC_TIRQE() & + bfin_read_EMAC_MMC_TIRQS()); + bfin_write_EMAC_MMC_RIRQS( + bfin_read_EMAC_MMC_RIRQE() & + bfin_read_EMAC_MMC_RIRQS()); + break; + case IRQ_MAC_RXFSINT: + bfin_write_EMAC_RX_STKY( + bfin_read_EMAC_RX_IRQE() & + bfin_read_EMAC_RX_STKY()); + break; + case IRQ_MAC_TXFSINT: + bfin_write_EMAC_TX_STKY( + bfin_read_EMAC_TX_IRQE() & + bfin_read_EMAC_TX_STKY()); + break; + case IRQ_MAC_WAKEDET: + bfin_write_EMAC_WKUP_CTL( + bfin_read_EMAC_WKUP_CTL() | MPKS | RWKS); + break; + default: + /* These bits are W1C */ + bfin_write_EMAC_SYSTAT(1L << (irq - IRQ_MAC_PHYINT)); + break; + } +} + +static void bfin_mac_status_mask_irq(unsigned int irq) +{ + mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT)); +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + switch (irq) { + case IRQ_MAC_PHYINT: + bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE); + break; + default: + break; + } +#else + if (!mac_stat_int_mask) + bfin_internal_mask_irq(IRQ_MAC_ERROR); +#endif + bfin_mac_status_ack_irq(irq); +} + +static void bfin_mac_status_unmask_irq(unsigned int irq) +{ +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + switch (irq) { + case IRQ_MAC_PHYINT: + bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE); + break; + default: + break; + } +#else + if (!mac_stat_int_mask) + bfin_internal_unmask_irq(IRQ_MAC_ERROR); +#endif + mac_stat_int_mask |= 1L << (irq - IRQ_MAC_PHYINT); +} + +#ifdef CONFIG_PM +int bfin_mac_status_set_wake(unsigned int irq, unsigned int state) +{ +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state); +#else + return bfin_internal_set_wake(IRQ_MAC_ERROR, state); +#endif +} +#endif + +static struct irq_chip bfin_mac_status_irqchip = { + .name = "MACST", + .ack = bfin_ack_noop, + .mask_ack = bfin_mac_status_mask_irq, + .mask = bfin_mac_status_mask_irq, + .unmask = bfin_mac_status_unmask_irq, +#ifdef CONFIG_PM + .set_wake = bfin_mac_status_set_wake, +#endif +}; + +static void bfin_demux_mac_status_irq(unsigned int int_err_irq, + struct irq_desc *inta_desc) +{ + int i, irq = 0; + u32 status = bfin_read_EMAC_SYSTAT(); + + for (i = 0; i < (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++) + if (status & (1L << i)) { + irq = IRQ_MAC_PHYINT + i; + break; + } + + if (irq) { + if (mac_stat_int_mask & (1L << (irq - IRQ_MAC_PHYINT))) { + bfin_handle_irq(irq); + } else { + bfin_mac_status_ack_irq(irq); + pr_debug("IRQ %d:" + " MASKED MAC ERROR INTERRUPT ASSERTED\n", + irq); + } + } else + printk(KERN_ERR + "%s : %s : LINE %d :\nIRQ ?: MAC ERROR" + " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", + __func__, __FILE__, __LINE__); +} +#endif + static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { #ifdef CONFIG_IPIPE @@ -1031,7 +1177,6 @@ int __init init_arch_irq(void) #elif defined(CONFIG_BF538) || defined(CONFIG_BF539) case IRQ_PORTF_INTA: #endif - set_irq_chained_handler(irq, bfin_demux_gpio_irq); break; @@ -1040,29 +1185,36 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif - -#ifdef CONFIG_SMP -#ifdef CONFIG_TICKSOURCE_GPTMR0 - case IRQ_TIMER0: -#endif -#ifdef CONFIG_TICKSOURCE_CORETMR - case IRQ_CORETMR: +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + case IRQ_MAC_ERROR: + set_irq_chained_handler(irq, bfin_demux_mac_status_irq); + break; #endif +#ifdef CONFIG_SMP case IRQ_SUPPLE_0: case IRQ_SUPPLE_1: set_irq_handler(irq, handle_percpu_irq); break; #endif -#ifdef CONFIG_IPIPE -#ifndef CONFIG_TICKSOURCE_CORETMR - case IRQ_TIMER0: +#ifdef CONFIG_TICKSOURCE_CORETMR + case IRQ_CORETMR: +# ifdef CONFIG_SMP + set_irq_handler(irq, handle_percpu_irq); + break; +# else set_irq_handler(irq, handle_simple_irq); break; +# endif #endif - case IRQ_CORETMR: + +#ifdef CONFIG_TICKSOURCE_GPTMR0 + case IRQ_TIMER0: set_irq_handler(irq, handle_simple_irq); break; +#endif + +#ifdef CONFIG_IPIPE default: set_irq_handler(irq, handle_level_irq); break; @@ -1078,14 +1230,22 @@ int __init init_arch_irq(void) for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip, handle_level_irq); +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + set_irq_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); +#endif #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++) + set_irq_chip_and_handler(irq, &bfin_mac_status_irqchip, + handle_level_irq); +#endif /* if configured as edge, then will be changed to do_edge_IRQ */ - for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) + for (irq = GPIO_IRQ_BASE; + irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) set_irq_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); - bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 8837be4edb4..c1f1ccc846f 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -11,6 +11,7 @@ #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> +#include <linux/slab.h> #include <linux/io.h> #include <linux/irq.h> diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 369e687582b..7cecbaf0358 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -21,6 +21,7 @@ #include <linux/smp.h> #include <linux/seq_file.h> #include <linux/irq.h> +#include <linux/slab.h> #include <asm/atomic.h> #include <asm/cacheflush.h> #include <asm/mmu_context.h> @@ -122,9 +123,17 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) wait = msg->call_struct.wait; cpu_clear(cpu, msg->call_struct.pending); func(info); - if (wait) + if (wait) { +#ifdef __ARCH_SYNC_CORE_DCACHE + /* + * 'wait' usually means synchronization between CPUs. + * Invalidate D cache in case shared data was changed + * by func() to ensure cache coherence. + */ + resync_core_dcache(); +#endif cpu_clear(cpu, msg->call_struct.waitmask); - else + } else kfree(msg); } @@ -219,6 +228,13 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) blackfin_dcache_invalidate_range( (unsigned long)(&msg->call_struct.waitmask), (unsigned long)(&msg->call_struct.waitmask)); +#ifdef __ARCH_SYNC_CORE_DCACHE + /* + * Invalidate D cache in case shared data was changed by + * other processors to ensure cache coherence. + */ + resync_core_dcache(); +#endif kfree(msg); } return 0; @@ -261,6 +277,13 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, blackfin_dcache_invalidate_range( (unsigned long)(&msg->call_struct.waitmask), (unsigned long)(&msg->call_struct.waitmask)); +#ifdef __ARCH_SYNC_CORE_DCACHE + /* + * Invalidate D cache in case shared data was changed by + * other processors to ensure cache coherence. + */ + resync_core_dcache(); +#endif kfree(msg); } return 0; @@ -322,8 +345,11 @@ void smp_send_stop(void) int __cpuinit __cpu_up(unsigned int cpu) { - struct task_struct *idle; int ret; + static struct task_struct *idle; + + if (idle) + free_task(idle); idle = fork_idle(cpu); if (IS_ERR(idle)) { @@ -332,7 +358,6 @@ int __cpuinit __cpu_up(unsigned int cpu) } secondary_stack = task_stack_page(idle) + THREAD_SIZE; - smp_wmb(); ret = platform_boot_secondary(cpu, idle); @@ -343,9 +368,6 @@ int __cpuinit __cpu_up(unsigned int cpu) static void __cpuinit setup_secondary(unsigned int cpu) { -#if !defined(CONFIG_TICKSOURCE_GPTMR0) - struct irq_desc *timer_desc; -#endif unsigned long ilat; bfin_write_IMASK(0); @@ -360,17 +382,6 @@ static void __cpuinit setup_secondary(unsigned int cpu) bfin_irq_flags |= IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; - -#if defined(CONFIG_TICKSOURCE_GPTMR0) - /* Power down the core timer, just to play safe. */ - bfin_write_TCNTL(0); - - /* system timer0 has been setup by CoreA. */ -#else - timer_desc = irq_desc + IRQ_CORETMR; - setup_core_timer(); - timer_desc->chip->enable(IRQ_CORETMR); -#endif } void __cpuinit secondary_start_kernel(void) @@ -405,7 +416,6 @@ void __cpuinit secondary_start_kernel(void) atomic_inc(&mm->mm_users); atomic_inc(&mm->mm_count); current->active_mm = mm; - BUG_ON(current->mm); /* Can't be, but better be safe than sorry. */ preempt_disable(); @@ -413,6 +423,9 @@ void __cpuinit secondary_start_kernel(void) platform_secondary_init(cpu); + /* setup local core timer */ + bfin_local_timer_setup(); + local_irq_enable(); /* @@ -462,25 +475,58 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); #ifdef __ARCH_SYNC_CORE_ICACHE +unsigned long icache_invld_count[NR_CPUS]; void resync_core_icache(void) { unsigned int cpu = get_cpu(); blackfin_invalidate_entire_icache(); - ++per_cpu(cpu_data, cpu).icache_invld_count; + icache_invld_count[cpu]++; put_cpu(); } EXPORT_SYMBOL(resync_core_icache); #endif #ifdef __ARCH_SYNC_CORE_DCACHE +unsigned long dcache_invld_count[NR_CPUS]; unsigned long barrier_mask __attribute__ ((__section__(".l2.bss"))); void resync_core_dcache(void) { unsigned int cpu = get_cpu(); blackfin_invalidate_entire_dcache(); - ++per_cpu(cpu_data, cpu).dcache_invld_count; + dcache_invld_count[cpu]++; put_cpu(); } EXPORT_SYMBOL(resync_core_dcache); #endif + +#ifdef CONFIG_HOTPLUG_CPU +int __cpuexit __cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EPERM; + + set_cpu_online(cpu, false); + return 0; +} + +static DECLARE_COMPLETION(cpu_killed); + +int __cpuexit __cpu_die(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +void cpu_die(void) +{ + complete(&cpu_killed); + + atomic_dec(&init_mm.mm_users); + atomic_dec(&init_mm.mm_count); + + local_irq_disable(); + platform_cpu_die(); +} +#endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index bb9c98f9cb5..355b87aa6b9 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -4,6 +4,7 @@ * Licensed under the GPL-2 or later. */ +#include <linux/gfp.h> #include <linux/swap.h> #include <linux/bootmem.h> #include <linux/uaccess.h> diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c index 84cdc5a1c13..39b058564f6 100644 --- a/arch/blackfin/mm/isram-driver.c +++ b/arch/blackfin/mm/isram-driver.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/sched.h> @@ -62,7 +63,7 @@ static void isram_write(const void *addr, uint64_t data) uint32_t cmd; unsigned long flags; - if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) + if (unlikely(addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))) return; cmd = IADDR2DTEST(addr) | 2; /* write */ @@ -93,7 +94,7 @@ static uint64_t isram_read(const void *addr) unsigned long flags; uint64_t ret; - if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH)) + if (unlikely(addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))) return 0; cmd = IADDR2DTEST(addr) | 0; /* read */ @@ -120,7 +121,7 @@ static bool isram_check_addr(const void *addr, size_t n) { if ((addr >= (void *)L1_CODE_START) && (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) { - if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) { + if (unlikely((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH))) { show_stack(NULL, NULL); pr_err("copy involving %p length (%zu) too long\n", addr, n); } diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index f068c11ea98..49b2ff2c8b7 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -17,6 +17,7 @@ #include <linux/proc_fs.h> #include <linux/spinlock.h> #include <linux/rtc.h> +#include <linux/slab.h> #include <asm/blackfin.h> #include <asm/mem_map.h> #include "blackfin_sram.h" @@ -402,7 +403,7 @@ void *l1_data_A_sram_alloc(size_t size) void *addr; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); @@ -411,7 +412,6 @@ void *l1_data_A_sram_alloc(size_t size) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); - put_cpu(); pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -430,7 +430,7 @@ int l1_data_A_sram_free(const void *addr) int ret; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); @@ -439,7 +439,6 @@ int l1_data_A_sram_free(const void *addr) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); - put_cpu(); return ret; #else @@ -455,7 +454,7 @@ void *l1_data_B_sram_alloc(size_t size) void *addr; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); @@ -464,7 +463,6 @@ void *l1_data_B_sram_alloc(size_t size) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); - put_cpu(); pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -483,7 +481,7 @@ int l1_data_B_sram_free(const void *addr) int ret; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); @@ -492,7 +490,6 @@ int l1_data_B_sram_free(const void *addr) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); - put_cpu(); return ret; #else @@ -540,7 +537,7 @@ void *l1_inst_sram_alloc(size_t size) void *addr; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags); @@ -549,7 +546,6 @@ void *l1_inst_sram_alloc(size_t size) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags); - put_cpu(); pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -568,7 +564,7 @@ int l1_inst_sram_free(const void *addr) int ret; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags); @@ -577,7 +573,6 @@ int l1_inst_sram_free(const void *addr) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags); - put_cpu(); return ret; #else @@ -593,7 +588,7 @@ void *l1sram_alloc(size_t size) void *addr; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); @@ -602,7 +597,6 @@ void *l1sram_alloc(size_t size) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); - put_cpu(); return addr; } @@ -614,7 +608,7 @@ void *l1sram_alloc_max(size_t *psize) void *addr; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); @@ -623,7 +617,6 @@ void *l1sram_alloc_max(size_t *psize) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); - put_cpu(); return addr; } @@ -635,7 +628,7 @@ int l1sram_free(const void *addr) int ret; unsigned int cpu; - cpu = get_cpu(); + cpu = smp_processor_id(); /* add mutex operation */ spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); @@ -644,7 +637,6 @@ int l1sram_free(const void *addr) /* add mutex operation */ spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); - put_cpu(); return ret; } |