diff options
Diffstat (limited to 'arch/blackfin')
24 files changed, 545 insertions, 794 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index fd5708523f2..b87634e75f2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -479,16 +479,6 @@ comment "Memory Setup" comment "Misc" -config ENET_FLASH_PIN - int "PF port/pin used for flash and ethernet sharing" - depends on (BFIN533_STAMP) - default 0 - help - PF port/pin used for flash and ethernet sharing to allow other PF - pins to be used on other platforms without having to touch common - code. - For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -695,6 +685,8 @@ choice prompt "Uncached SDRAM region" default DMA_UNCACHED_1M depends on BFIN_DMA_5XX +config DMA_UNCACHED_4M + bool "Enable 4M DMA region" config DMA_UNCACHED_2M bool "Enable 2M DMA region" config DMA_UNCACHED_1M diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 64876dfc2e5..5e6fb9d8e50 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 +# Fri May 16 10:02:29 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +14,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +64,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +133,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC32M16A2TG_75=y CONFIG_BFIN527_EZKIT=y @@ -227,12 +218,14 @@ CONFIG_IRQ_USB_DMA=11 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -246,13 +239,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -288,12 +285,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -338,10 +337,6 @@ CONFIG_BANK_3=0xFFC0 # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -357,9 +352,15 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Networking # CONFIG_NET=y @@ -395,6 +396,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -421,10 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -444,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -452,14 +451,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -479,6 +475,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -542,39 +539,27 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -582,22 +567,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -611,21 +592,24 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -635,6 +619,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -642,15 +635,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -665,7 +650,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -697,7 +681,6 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set @@ -706,7 +689,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_AD5304 is not set +# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -735,27 +718,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y @@ -777,21 +744,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -814,14 +784,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -829,12 +796,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -849,13 +816,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -865,6 +835,25 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -881,72 +870,133 @@ CONFIG_HWMON=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y # -# Enable Host or Gadget support to see Inventra options +# Blackfin high speed USB support # +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_LIBUSUAL is not set # -# LED devices +# USB Imaging devices # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# LED drivers +# USB port drivers # # -# LED Triggers +# USB Serial Converter support # +# CONFIG_USB_SERIAL is not set # -# InfiniBand support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB DSL modem support # # -# Real Time Clock +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -966,6 +1016,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -973,6 +1024,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -984,8 +1036,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -994,22 +1048,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients +# Userspace I/O # - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1054,7 +1095,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1080,10 +1120,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1092,10 +1134,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1115,17 +1154,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1166,21 +1200,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1188,6 +1217,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1207,11 +1237,8 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_CRYPTO is not set # @@ -1222,6 +1249,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 5bfdfb287d1..1ff2ff4b49a 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +132,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_SPORT0_RX=9 @@ -169,6 +159,7 @@ CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 CONFIG_BFIN548_EZKIT=y +# CONFIG_BFIN548_BLUETECHNIX_CM is not set # # BF548 Specific Configuration @@ -262,12 +253,14 @@ CONFIG_PINT3_ASSIGN=0x02020303 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -281,14 +274,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -# CONFIG_MEM_MT46V32M16_6T is not set -CONFIG_MEM_MT46V32M16_5B=y -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -324,12 +320,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set @@ -377,10 +375,6 @@ CONFIG_EBIU_FCTLVAL=0x6 # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -396,6 +390,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # @@ -439,6 +434,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -465,10 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -488,6 +480,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -496,14 +489,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -523,6 +513,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -587,39 +578,27 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -627,6 +606,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -657,43 +637,35 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_PATA_PLATFORM is not set CONFIG_PATA_BF54X=y -CONFIG_PATA_BF54X_DMA=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set CONFIG_SMSC911X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -703,6 +675,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -710,15 +691,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -733,9 +706,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m @@ -758,6 +728,7 @@ CONFIG_KEYBOARD_BFIN=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -787,7 +758,6 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set @@ -796,7 +766,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_AD5304 is not set +# CONFIG_SIMPLE_GPIO is not set CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y @@ -830,27 +800,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y @@ -872,21 +826,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -909,14 +866,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -924,12 +878,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -944,13 +898,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -960,6 +917,25 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -972,23 +948,20 @@ CONFIG_HWMON=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1003,18 +976,24 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -# CONFIG_FB_BFIN_7171 is not set -# CONFIG_FB_BFIN_7393 is not set CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_7393 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -1065,10 +1044,21 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# SPI devices +# + +# # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73311 is not set +# CONFIG_SND_BFIN_AD73322 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support @@ -1084,6 +1074,10 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y CONFIG_SND_BF5XX_SPORT_NUM=0 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 + +# +# SoC Audio support for SuperH +# CONFIG_SND_SOC_AD1980=y # @@ -1091,72 +1085,152 @@ CONFIG_SND_SOC_AD1980=y # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y - -# -# HID Devices -# -CONFIG_HID=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y # -# Enable Host or Gadget support to see Inventra options +# USB Host Controller Drivers # +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +# CONFIG_USB_INVENTRA_DMA is not set +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_GADGET is not set -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # -# MMC/SD Card Drivers +# USB Imaging devices # -CONFIG_MMC_BLOCK=m +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y # -# MMC/SD Host Controller Drivers +# USB port drivers # -CONFIG_SDH_BFIN=m -# CONFIG_SPI_MMC is not set # -# LED devices +# USB Serial Converter support # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_SERIAL is not set # -# LED drivers +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # -# LED Triggers +# USB DSL modem support # # -# InfiniBand support +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_SDH_BFIN=m +# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set +# CONFIG_MMC_SPI is not set +# CONFIG_SPI_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1176,6 +1250,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1183,6 +1258,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1194,8 +1270,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1204,22 +1282,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients +# Userspace I/O # - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1280,7 +1345,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1306,10 +1370,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1318,10 +1384,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1352,7 +1415,6 @@ CONFIG_CIFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1375,10 +1437,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1419,21 +1477,16 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1441,6 +1494,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1460,11 +1514,8 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_CRYPTO is not set # @@ -1475,6 +1526,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 5f6ff04a86c..4384a670a8b 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=64 CONFIG_MEM_ADD_WIDTH=10 # diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index fd5448d6107..d54f19085f3 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -90,6 +90,17 @@ int request_dma(unsigned int channel, char *device_id) { pr_debug("request_dma() : BEGIN \n"); + +#if defined(CONFIG_BF561) && ANOMALY_05000182 + if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { + if (get_cclk() > 500000000) { + printk(KERN_WARNING + "Request IMDMA failed due to ANOMALY 05000182\n"); + return -EFAULT; + } + } +#endif + mutex_lock(&(dma_ch[channel].dmalock)); if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 7e8eaf4a31b..b6d89d1644c 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1130,6 +1130,25 @@ void bfin_gpio_irq_prepare(unsigned gpio) #else +int gpio_get_value(unsigned gpio) +{ + unsigned long flags; + int ret; + + if (unlikely(get_gpio_edge(gpio))) { + local_irq_save(flags); + set_gpio_edge(gpio, 0); + ret = get_gpio_data(gpio); + set_gpio_edge(gpio, 1); + local_irq_restore(flags); + + return ret; + } else + return get_gpio_data(gpio); +} +EXPORT_SYMBOL(gpio_get_value); + + int gpio_direction_input(unsigned gpio) { unsigned long flags; diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 053edff6c0d..4367330909b 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -90,7 +90,9 @@ EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(outsb); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(outsw_8); EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(insw_8); EXPORT_SYMBOL(outsl); EXPORT_SYMBOL(insl); EXPORT_SYMBOL(insl_16); diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index e698554895a..3a3e9615b00 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -10,8 +10,8 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/blackfin.h> #include <asm/gptimers.h> diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c index c640154030e..6bdba7b2110 100644 --- a/arch/blackfin/kernel/init_task.c +++ b/arch/blackfin/kernel/init_task.c @@ -34,7 +34,6 @@ #include <linux/fs.h> static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5b847070dae..f061f518162 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -67,7 +67,7 @@ void __init trap_init(void) CSYNC(); } -void *saved_icplb_fault_addr, *saved_dcplb_fault_addr; +unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr; int kstack_depth_to_print = 48; @@ -364,13 +364,13 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ case VEC_CPLB_MHIT: info.si_code = ILL_CPLB_MULHIT; -#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_NOTICE "NULL pointer access (probably)\n"); -#else - sig = SIGILL; - printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + if (saved_dcplb_fault_addr < FIXED_CODE_START) + printk(KERN_NOTICE "NULL pointer access\n"); + else #endif + printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x28 - Emulation Watchpoint, handled here */ @@ -419,13 +419,13 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x2D - Instruction CPLB Multiple Hits, handled here */ case VEC_CPLB_I_MHIT: info.si_code = ILL_CPLB_MULHIT; -#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n"); -#else - sig = SIGILL; - printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + if (saved_icplb_fault_addr < FIXED_CODE_START) + printk(KERN_NOTICE "Jump to NULL address\n"); + else #endif + printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2E - Illegal use of Supervisor Resource, handled here */ @@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) oops_in_progress = 1; - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr); dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c index 42768e0c80c..5c87505165d 100644 --- a/arch/blackfin/lib/checksum.c +++ b/arch/blackfin/lib/checksum.c @@ -72,9 +72,9 @@ static unsigned short do_csum(const unsigned char *buff, int len) * This is a version of ip_compute_csum() optimized for IP headers, * which always checksum on 4 octet boundaries. */ -unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) +__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl) { - return ~do_csum(iph, ihl * 4); + return (__force __sum16)~do_csum(iph, ihl * 4); } /* @@ -89,7 +89,7 @@ unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) * * it's best to have buff aligned on a 32-bit boundary */ -unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) +__wsum csum_partial(const void *buff, int len, __wsum sum) { /* * Just in case we get nasty checksum data... @@ -109,22 +109,22 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) * this routine is used for miscellaneous IP-like checksums, mainly * in icmp.c */ -unsigned short ip_compute_csum(const unsigned char *buff, int len) +__sum16 ip_compute_csum(const void *buff, int len) { - return ~do_csum(buff, len); + return (__force __sum16)~do_csum(buff, len); } /* * copy from fs while checksumming, otherwise like csum_partial */ -unsigned int -csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, - int len, int sum, int *csum_err) +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err) { if (csum_err) *csum_err = 0; - memcpy(dst, src, len); + memcpy(dst, (__force void *)src, len); return csum_partial(dst, len, sum); } @@ -132,8 +132,7 @@ csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, * copy from ds while checksumming, otherwise like csum_partial */ -unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst, - int len, int sum) +__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) { memcpy(dst, src, len); return csum_partial(dst, len, sum); diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index df7b8833a0c..eba2343b1b5 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -7,7 +7,7 @@ * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops. * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl> * * Bugs: Enter bugs at http://blackfin.uclinux.org/ @@ -63,6 +63,23 @@ ENTRY(_insw) RTS; ENDPROC(_insw) +ENTRY(_insw_8) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: R0 = W[P0]; + B[P1++] = R0; + R0 = R0 >> 8; + B[P1++] = R0; + NOP; +.Lword8_loop_e: NOP; + sti R3; + RTS; +ENDPROC(_insw_8) + ENTRY(_insb) P0 = R0; /* P0 = port */ cli R3; @@ -78,8 +95,6 @@ ENTRY(_insb) RTS; ENDPROC(_insb) - - ENTRY(_insl_16) P0 = R0; /* P0 = port */ cli R3; diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index 4c3da8ae094..4685b7aa008 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -7,7 +7,7 @@ * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops. * * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl> - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -63,3 +63,17 @@ ENTRY(_outsb) .Lbyte_loop_e: B[P0] = R0; RTS; ENDPROC(_outsb) + +ENTRY(_outsw_8) + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: R1 = B[P1++]; + R0 = B[P1++]; + R0 = R0 << 8; + R0 = R0 + R1; +.Lword8_loop_e: W[P0] = R0; + RTS; +ENDPROC(_outsw_8) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 8aa49f80422..5958eecefcf 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -647,10 +644,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, + .irq = IRQ_PF8, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = 2, .controller_data = &spi_ad7877_chip_info, }, #endif @@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -799,13 +797,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), - .type = "pcf8574_lcd", }, #endif #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), - .type = "pcf8574_keypad", .irq = IRQ_PF8, }, #endif @@ -1020,10 +1016,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 9d28415163e..079389cbd85 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -87,9 +87,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -425,9 +423,7 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 7fd35fb32fd..13ae49515f7 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -111,7 +111,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) +#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -141,13 +141,17 @@ static struct resource stamp_flash_resource[] = { .end = 0x203fffff, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_ENET_FLASH_PIN, + .start = 0x7BB07BB0, /* AMBCTL0 setting when accessing flash */ + .end = 0x7BB07BB0, /* AMBCTL1 setting when accessing flash */ + .flags = IORESOURCE_MEM, + }, { + .start = GPIO_PF0, .flags = IORESOURCE_IRQ, } }; static struct platform_device stamp_flash_device = { - .name = "BF5xx-Flash", + .name = "bfin-async-flash", .id = 0, .dev = { .platform_data = &stamp_flash_data, @@ -157,9 +161,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -316,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -595,7 +597,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, -#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) +#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) &stamp_flash_device, #endif }; @@ -617,15 +619,13 @@ static int __init stamp_init(void) #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); - bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + bfin_write_FIO_FLAG_S(PF0); SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif @@ -636,8 +636,8 @@ arch_initcall(stamp_init); void native_machine_restart(char *cmd) { -#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) - bfin_write_FIO_INEN(~BIT_TO_SET); - bfin_write_FIO_DIR(BIT_TO_SET); - bfin_write_FIO_FLAG_C(BIT_TO_SET); + /* workaround pull up on cpld / flash pin not being strong enough */ + bfin_write_FIO_INEN(~PF0); + bfin_write_FIO_DIR(PF0); + bfin_write_FIO_FLAG_C(PF0); } diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 87e450f29e3..c94f7a5b821 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o -obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o +obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S deleted file mode 100644 index 4e9ea4283e5..00000000000 --- a/arch/blackfin/mach-bf537/boards/led.S +++ /dev/null @@ -1,183 +0,0 @@ -/**************************************************** - * LED1 ---- PF6 LED2 ---- PF7 * - * LED3 ---- PF8 LED4 ---- PF9 * - * LED5 ---- PF10 LED6 ---- PF11 * - ****************************************************/ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 12; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z); - R2 = ~R1; - - P0.H = hi(PORTF_FER); - P0.L = lo(PORTF_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_DIR); - P0.L = lo(PORTFIO_DIR); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_INEN); - P0.L = lo(PORTFIO_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - R1 = ~R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9a756d1f3d7..671f9d67f23 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -939,10 +937,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index eed161dd784..319ef54c422 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -2,5 +2,5 @@ # arch/blackfin/mach-bf548/boards/Makefile # -obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 3b74f96d359..4f4ae8787ed 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { static int __init cm_bf548_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d1682bb3750..af7c211a580 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) /* SPI flash chip (m25p16) */ @@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif -static struct spi_board_info bf54x_spi_board_info[] __initdata = { +static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) { @@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -800,10 +799,7 @@ static int __init ezkit_init(void) platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bf54x_spi_board_info, - ARRAY_SIZE(bf54x_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S deleted file mode 100644 index f47daf3770d..00000000000 --- a/arch/blackfin/mach-bf548/boards/led.S +++ /dev/null @@ -1,172 +0,0 @@ -/**************************************************** - * LED1 ---- PG6 LED2 ---- PG7 * - * LED3 ---- PG8 LED4 ---- PG9 * - * LED5 ---- PG10 LED6 ---- PG11 * - ****************************************************/ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 0; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z); - R2 = ~R1; - - P0.H = hi(PORTG_FER); - P0.L = lo(PORTG_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTG_DIR_SET); - P0.L = lo(PORTG_DIR_SET); - W[P0] = R1.L; - SSYNC; - - P0.H = hi(PORTG_INEN); - P0.L = lo(PORTG_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_SET); - P0.L = lo(PORTG_SET); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_CLEAR); - P0.L = lo(PORTG_CLEAR); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 61d8f7648b2..bc6feded856 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { @@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = { .bits_per_word = 8, }; #endif -#endif +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = { .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; +#endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SND_BLACKFIN_AD1836) \ @@ -537,10 +537,7 @@ static int __init ezkit_init(void) SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; |