diff options
Diffstat (limited to 'arch/blackfin')
24 files changed, 1076 insertions, 861 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f78c9a2c7e2..9ceccef9c64 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -34,7 +34,6 @@ config BLACKFIN select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE - select USE_GENERIC_SMP_HELPERS if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS @@ -52,6 +51,9 @@ config GENERIC_BUG config ZONE_DMA def_bool y +config GENERIC_GPIO + def_bool y + config FORCE_MAX_ZONEORDER int default "14" @@ -317,6 +319,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config GPIO_ADI + def_bool y + depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) + +config PINCTRL + def_bool y + depends on BF54x || BF60x + config MEM_MT48LC64M4A2FB_7E bool depends on (BFIN533_STAMP) @@ -1429,7 +1439,6 @@ source "drivers/cpufreq/Kconfig" config BFIN_CPU_FREQ bool depends on CPU_FREQ - select CPU_FREQ_TABLE default y config CPU_VOLTAGE diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig index 13eb73231a9..4ca39ab6b2b 100644 --- a/arch/blackfin/configs/BF609-EZKIT_defconfig +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig @@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN6XX=y +CONFIG_SPI_BFIN_V3=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 127826f8a37..f2b43474b0e 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -44,3 +44,4 @@ generic-y += ucontext.h generic-y += unaligned.h generic-y += user.h generic-y += xor.h +generic-y += preempt.h diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 98d0133346b..99d338ca2ea 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -25,8 +25,12 @@ #ifndef __ASSEMBLY__ +#ifndef CONFIG_PINCTRL + #include <linux/compiler.h> -#include <linux/gpio.h> +#include <asm/blackfin.h> +#include <asm/portmux.h> +#include <asm/irq_handler.h> /*********************************************************** * @@ -45,7 +49,6 @@ * MODIFICATION HISTORY : **************************************************************/ -#if !BFIN_GPIO_PINT void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -115,7 +118,6 @@ struct gpio_port_t { unsigned short dummy16; unsigned short inen; }; -#endif #ifdef BFIN_SPECIAL_GPIO_BANKS void bfin_special_gpio_free(unsigned gpio); @@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void); #endif #ifdef CONFIG_PM -int bfin_pm_standby_ctrl(unsigned ctrl); +void bfin_gpio_pm_hibernate_restore(void); +void bfin_gpio_pm_hibernate_suspend(void); +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); +int bfin_gpio_pm_standby_ctrl(unsigned ctrl); static inline int bfin_pm_standby_setup(void) { - return bfin_pm_standby_ctrl(1); + return bfin_gpio_pm_standby_ctrl(1); } static inline void bfin_pm_standby_restore(void) { - bfin_pm_standby_ctrl(0); + bfin_gpio_pm_standby_ctrl(0); } -void bfin_gpio_pm_hibernate_restore(void); -void bfin_gpio_pm_hibernate_suspend(void); -void bfin_pint_suspend(void); -void bfin_pint_resume(void); - -# if !BFIN_GPIO_PINT -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); struct gpio_port_s { unsigned short data; @@ -161,7 +159,6 @@ struct gpio_port_s { unsigned short reserved; unsigned short mux; }; -# endif #endif /*CONFIG_PM*/ /*********************************************************** @@ -178,36 +175,29 @@ struct gpio_port_s { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ - -int bfin_gpio_request(unsigned gpio, const char *label); -void bfin_gpio_free(unsigned gpio); int bfin_gpio_irq_request(unsigned gpio, const char *label); void bfin_gpio_irq_free(unsigned gpio); -int bfin_gpio_direction_input(unsigned gpio); -int bfin_gpio_direction_output(unsigned gpio, int value); -int bfin_gpio_get_value(unsigned gpio); -void bfin_gpio_set_value(unsigned gpio, int value); +void bfin_gpio_irq_prepare(unsigned gpio); + +static inline int irq_to_gpio(unsigned irq) +{ + return irq - GPIO_IRQ_BASE; +} +#endif /* CONFIG_PINCTRL */ #include <asm/irq.h> #include <asm/errno.h> -#ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ static inline int gpio_get_value(unsigned int gpio) { - if (gpio < MAX_BLACKFIN_GPIOS) - return bfin_gpio_get_value(gpio); - else - return __gpio_get_value(gpio); + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned int gpio, int value) { - if (gpio < MAX_BLACKFIN_GPIOS) - bfin_gpio_set_value(gpio, value); - else - __gpio_set_value(gpio, value); + __gpio_set_value(gpio, value); } static inline int gpio_cansleep(unsigned int gpio) @@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio) { return __gpio_to_irq(gpio); } - -#else /* !CONFIG_GPIOLIB */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return bfin_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bfin_gpio_direction_output(gpio, value); -} - -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -{ - return -EINVAL; -} - -static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) -{ - int err; - - err = bfin_gpio_request(gpio, label); - if (err) - return err; - - if (flags & GPIOF_DIR_IN) - err = bfin_gpio_direction_input(gpio); - else - err = bfin_gpio_direction_output(gpio, - (flags & GPIOF_INIT_HIGH) ? 1 : 0); - - if (err) - bfin_gpio_free(gpio); - - return err; -} - -static inline int gpio_request_array(const struct gpio *array, size_t num) -{ - int i, err; - - for (i = 0; i < num; i++, array++) { - err = gpio_request_one(array->gpio, array->flags, array->label); - if (err) - goto err_free; - } - return 0; - -err_free: - while (i--) - bfin_gpio_free((--array)->gpio); - return err; -} - -static inline void gpio_free_array(const struct gpio *array, size_t num) -{ - while (num--) - bfin_gpio_free((array++)->gpio); -} - -static inline int __gpio_get_value(unsigned gpio) -{ - return bfin_gpio_get_value(gpio); -} - -static inline void __gpio_set_value(unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - return __gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - if (likely(gpio < MAX_BLACKFIN_GPIOS)) - return gpio + GPIO_IRQ_BASE; - - return -EINVAL; -} - -#include <asm-generic/gpio.h> /* cansleep wrappers */ -#endif /* !CONFIG_GPIOLIB */ - -static inline int irq_to_gpio(unsigned irq) -{ - return (irq - GPIO_IRQ_BASE); -} - #endif /* __ASSEMBLY__ */ #endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index c078dd78d99..58b54a6d5a1 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -12,9 +12,6 @@ extern void ack_bad_irq(unsigned int irq); #define ack_bad_irq ack_bad_irq -/* Define until common code gets sane defaults */ -#define HARDIRQ_BITS 9 - #include <asm-generic/hardirq.h> #endif diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 4ae1144a457..2fd04f10cc2 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -23,8 +23,7 @@ /* * pm save bfin pint registers */ -struct bfin_pm_pint_save { - u32 mask_set; +struct adi_pm_pint_save { u32 assign; u32 edge_set; u32 invert_set; diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h index 4fbf83575db..4b2a992794d 100644 --- a/arch/blackfin/include/asm/irq_handler.h +++ b/arch/blackfin/include/asm/irq_handler.h @@ -12,11 +12,11 @@ #include <mach/irq.h> /* init functions only */ -extern int __init init_arch_irq(void); +extern int init_arch_irq(void); extern void init_exception_vectors(void); -extern void __init program_IAR(void); +extern void program_IAR(void); #ifdef init_mach_irq -extern void __init init_mach_irq(void); +extern void init_mach_irq(void); #else # define init_mach_irq() #endif diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 9b1e2c37b32..7aa20436e79 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -17,14 +17,29 @@ #define P_MAYSHARE 0x2000 #define P_DONTCARE 0x1000 - +#ifdef CONFIG_PINCTRL +#include <asm/irq_handler.h> + +#define gpio_pint_regs bfin_pint_regs +#define adi_internal_set_wake bfin_internal_set_wake + +#define peripheral_request(per, label) 0 +#define peripheral_free(per) +#define peripheral_request_list(per, label) \ + (pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \ + ? -EINVAL : 0) : 0) +#define peripheral_free_list(per) +#else int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); int peripheral_request_list(const unsigned short per[], const char *label); void peripheral_free_list(const unsigned short per[]); +#endif -#include <asm/gpio.h> +#include <linux/err.h> +#include <linux/pinctrl/pinctrl.h> #include <mach/portmux.h> +#include <linux/gpio.h> #ifndef P_SPORT2_TFS #define P_SPORT2_TFS P_UNDEF diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 3894005337b..55f473bdad3 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -88,8 +88,6 @@ static inline struct thread_info *current_thread_info(void) #define TI_CPU 12 #define TI_PREEMPT 16 -#define PREEMPT_ACTIVE 0x4000000 - /* * thread information flag bit numbers */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 735f24e0742..703dc7cf2ec 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \ + fixed_code.o reboot.o bfin_dma.o \ exception.o dumpstack.o ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) @@ -16,6 +16,7 @@ else obj-y += time.o endif +obj-$(CONFIG_GPIO_ADI) += bfin_gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ed978f1c5cb..a017359c182 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -11,11 +11,8 @@ #include <linux/err.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <asm/blackfin.h> -#include <asm/gpio.h> -#include <asm/portmux.h> +#include <linux/gpio.h> #include <linux/irq.h> -#include <asm/irq_handler.h> #if ANOMALY_05000311 || ANOMALY_05000323 enum { @@ -58,19 +55,6 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, -# if defined(CONFIG_BF54x) - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -# endif #else # error no gpio arrays defined #endif @@ -169,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); inline int check_gpio(unsigned gpio) { -#if defined(CONFIG_BF54x) - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) - return -EINVAL; -#endif if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; @@ -212,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage) else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - if (usage == GPIO_USAGE) - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); #endif } @@ -255,7 +227,7 @@ static int portmux_group_check(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 m, pmux, pfunc; + u16 m, pmux, pfunc, mask; if (offset < 0) return 0; @@ -270,10 +242,12 @@ static int portmux_group_check(unsigned short per) continue; if (offset == 1) - pfunc = (pmux >> offset) & 3; + mask = 3; else - pfunc = (pmux >> offset) & 1; - if (pfunc != function) { + mask = 1; + + pfunc = (pmux >> offset) & mask; + if (pfunc != (function & mask)) { pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", ident, function, m, pfunc); return -EINVAL; @@ -288,43 +262,21 @@ static void portmux_setup(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 pmux; + u16 pmux, mask; if (offset == -1) return; pmux = bfin_read_PORT_MUX(); - if (offset != 1) - pmux &= ~(1 << offset); + if (offset == 1) + mask = 3; else - pmux &= ~(3 << 1); - pmux |= (function << offset); - bfin_write_PORT_MUX(pmux); -} -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) -inline void portmux_setup(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - u32 pmux; + mask = 1; - pmux = gpio_array[gpio_bank(ident)]->port_mux; + pmux &= ~(mask << offset); + pmux |= ((function & mask) << offset); - pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - - gpio_array[gpio_bank(ident)]->port_mux = pmux; -} - -inline u16 get_portmux(unsigned short per) -{ - u16 ident = P_IDENT(per); - u32 pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); -} -static int portmux_group_check(unsigned short per) -{ - return 0; + bfin_write_PORT_MUX(pmux); } #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) static int portmux_group_check(unsigned short per) @@ -379,7 +331,6 @@ static int portmux_group_check(unsigned short per) } #endif -#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -572,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) { unsigned long flags; @@ -591,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) return 0; } -int bfin_pm_standby_ctrl(unsigned ctrl) +int bfin_gpio_pm_standby_ctrl(unsigned ctrl) { u16 bank, mask, i; @@ -682,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void) #endif -#else /* CONFIG_BF54x || CONFIG_BF60x */ -#ifdef CONFIG_PM - -int bfin_pm_standby_ctrl(unsigned ctrl) -{ - return 0; -} - -void bfin_gpio_pm_hibernate_suspend(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; - } -} - -void bfin_gpio_pm_hibernate_restore(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - & gpio_bank_saved[bank].dir; - gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; - } -} -#endif - -unsigned short get_gpio_dir(unsigned gpio) -{ - return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(get_gpio_dir); - -#endif /* CONFIG_BF54x || CONFIG_BF60x */ /*********************************************************** * @@ -785,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { -#else if (!(per & P_MAYSHARE)) { -#endif /* * Allow that the identical pin function can * be requested from the same driver twice @@ -938,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) if (unlikely(is_reserved(gpio_irq, gpio, 1))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); - } -#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) - else { /* Reset POLAR setting when acquiring a gpio for the first time */ + } else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } -#endif reserve(gpio, gpio); set_label(gpio, label); @@ -1112,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); -#endif gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); } @@ -1140,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input); void bfin_gpio_irq_prepare(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - unsigned long flags; -#endif - port_setup(gpio, GPIO_USAGE); - -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - flags = hard_local_irq_save(); - __bfin_gpio_direction_input(gpio); - hard_local_irq_restore(flags); -#endif } void bfin_gpio_set_value(unsigned gpio, int arg) @@ -1175,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); -#endif AWA_DUMMY_READ(dir); hard_local_irq_restore(flags); @@ -1190,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); -#else unsigned long flags; if (unlikely(get_gpio_edge(gpio))) { @@ -1205,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio) return ret; } else return get_gpio_data(gpio); -#endif } EXPORT_SYMBOL(bfin_gpio_get_value); diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 94acb586832..334ec7b1218 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -377,40 +377,6 @@ config IRQ_PINT3 endmenu -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF54x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x01010000 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x07000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x02020303 - -endmenu - endmenu endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 372eb54944e..d495000b81a 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -17,6 +17,9 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> #include <asm/bfin5xx_spi.h> #include <asm/dma.h> #include <asm/gpio.h> @@ -241,6 +244,13 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTE_FER, + .end = PORTE_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -289,6 +299,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTH_FER, + .end = PORTH_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -353,6 +370,13 @@ static struct resource bfin_uart2_resources[] = { .end = UART2_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART2_TX, .end = IRQ_UART2_TX, @@ -401,6 +425,13 @@ static struct resource bfin_uart3_resources[] = { .end = UART3_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART3_TX, .end = IRQ_UART3_TX, @@ -1058,6 +1089,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_gpio_base = GPIO_PA0, /* Optional */ + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_gpio_base = GPIO_PB0, + .port_pin_base = GPIO_PB0, + .port_width = 15, + .pint_id = 0, + .pint_assign = true, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_gpio_base = GPIO_PC0, + .port_pin_base = GPIO_PC0, + .port_width = 14, + .pint_id = 2, + .pint_assign = true, + .pint_map = 0, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_gpio_base = GPIO_PD0, + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_gpio_base = GPIO_PE0, + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = true, + .pint_map = 2, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_gpio_base = GPIO_PF0, + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 3, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_gpio_base = GPIO_PG0, + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gph_resources[] = { + { + .start = PORTH_FER, + .end = PORTH_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PH0, + .end = IRQ_PH0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = { + .port_gpio_base = GPIO_PH0, + .port_pin_base = GPIO_PH0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gph_device = { + .name = ADI_GPIO_DEVNAME, + .id = 7, + .num_resources = ARRAY_SIZE(bfin_gph_resources), + .resource = bfin_gph_resources, + .dev = { + .platform_data = &bfin_gph_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpi_resources[] = { + { + .start = PORTI_FER, + .end = PORTI_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PI0, + .end = IRQ_PI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = { + .port_gpio_base = GPIO_PI0, + .port_pin_base = GPIO_PI0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpi_device = { + .name = ADI_GPIO_DEVNAME, + .id = 8, + .num_resources = ARRAY_SIZE(bfin_gpi_resources), + .resource = bfin_gpi_resources, + .dev = { + .platform_data = &bfin_gpi_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpj_resources[] = { + { + .start = PORTJ_FER, + .end = PORTJ_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PJ0, + .end = IRQ_PJ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = { + .port_gpio_base = GPIO_PJ0, + .port_pin_base = GPIO_PJ0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gpj_device = { + .name = ADI_GPIO_DEVNAME, + .id = 9, + .num_resources = ARRAY_SIZE(bfin_gpj_resources), + .resource = bfin_gpj_resources, + .dev = { + .platform_data = &bfin_gpj_pdata, /* Passed to driver */ + }, +}; + +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1066,7 +1502,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, @@ -1078,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ }, #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) @@ -1088,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */ }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1096,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */ }, #endif #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) @@ -1106,7 +1542,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PC5, .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ .mode = SPI_MODE_3, }, #endif @@ -1152,7 +1588,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1168,7 +1604,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1508,6 +1944,23 @@ static struct platform_device bfin_ac97 = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, + &bfin_gph_device, + &bfin_gpi_device, + &bfin_gpj_device, +#endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -1644,10 +2097,66 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif }; +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), +#ifdef CONFIG_BFIN_UART1_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"), +#ifdef CONFIG_BFIN_UART3_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", NULL, "ppi0_24b"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"), +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", NULL, "keys_4x4"), +}; + static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ @@ -1679,21 +2188,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart3_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART - &bfin_sport3_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index be9edb28f96..006da1edcf8 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -194,14 +194,6 @@ struct gpio_port_t { unsigned int port_mux; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 10dc142c518..cf7cb725cfa 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -433,7 +433,7 @@ #include <linux/types.h> /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index e2224620273..d9f8632d7d0 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig index 2bcbf94b1ed..b0fca44110b 100644 --- a/arch/blackfin/mach-bf609/Kconfig +++ b/arch/blackfin/mach-bf609/Kconfig @@ -9,48 +9,6 @@ source "arch/blackfin/mach-bf609/boards/Kconfig" menu "BF609 Specific Configuration" -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF60x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT4_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT5_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 - -endmenu - config SEC_IRQ_PRIORITY_LEVELS int "SEC interrupt priority levels" default 7 diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index d56a55ad83a..82beedd953f 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -17,6 +17,9 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> #include <asm/bfin_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> @@ -106,8 +109,6 @@ static struct platform_device bfin_rotary_device = { #include <linux/stmmac.h> #include <linux/phy.h> -static unsigned short pins[] = P_RMII0; - static struct stmmac_mdio_bus_data phy_private_data = { .phy_mask = 1, }; @@ -212,6 +213,18 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTD_FER, + .end = PORTD_FER+2, + .flags = IORESOURCE_REG, + }, + { + .start = PORTD_MUX, + .end = PORTD_MUX+3, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -276,6 +289,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTG_FER_SET, + .end = PORTG_FER_SET+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -674,17 +694,12 @@ static struct mtd_partition ezkit_partitions[] = { }, }; -int bf609_nor_flash_init(struct platform_device *dev) +int bf609_nor_flash_init(struct platform_device *pdev) { #define CONFIG_SMC_GCTL_VAL 0x00000010 - const unsigned short pins[] = { - P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, - P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, - P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, - }; - - peripheral_request_list(pins, "smc0"); + if (!devm_pinctrl_get_select_default(&pdev->dev)) + return -EBUSY; bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); bfin_write32(SMC_B0CTL, 0x01002011); bfin_write32(SMC_B0TIM, 0x08170977); @@ -692,16 +707,9 @@ int bf609_nor_flash_init(struct platform_device *dev) return 0; } -void bf609_nor_flash_exit(struct platform_device *dev) +void bf609_nor_flash_exit(struct platform_device *pdev) { - const unsigned short pins[] = { - P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, - P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, - P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, - }; - - peripheral_free_list(pins); - + devm_pinctrl_put(pdev->dev.pins->p); bfin_write32(SMC_GCTL, 0); } @@ -1319,6 +1327,356 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_pint4_resources[] = { + { + .start = PINT4_MASK_SET, + .end = PINT4_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT4, + .end = IRQ_PINT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint4_device = { + .name = ADI_PINT_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_pint4_resources), + .resource = bfin_pint4_resources, +}; + +static struct resource bfin_pint5_resources[] = { + { + .start = PINT5_MASK_SET, + .end = PINT5_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT5, + .end = IRQ_PINT5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint5_device = { + .name = ADI_PINT_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_pint5_resources), + .resource = bfin_pint5_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_pin_base = GPIO_PB0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_pin_base = GPIO_PC0, + .port_width = GPIO_BANKSIZE, + .pint_id = 1, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 4, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = 5, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +#endif + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -1349,7 +1707,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, @@ -1362,7 +1720,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PD9, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */ }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1370,7 +1728,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .controller_data = &spidev_chip_info, }, #endif @@ -1565,6 +1923,22 @@ static struct platform_device bfin_dpmc = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_pint4_device, + &bfin_pint5_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, +#endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -1681,20 +2055,52 @@ static struct platform_device *ezkit_devices[] __initdata = { }; +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"), +#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE) + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"), +#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE) + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"), +#else + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), +}; + static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) - if (!peripheral_request_list(pins, "emac0")) - printk(KERN_ERR "%s(): request emac pins failed\n", __func__); -#endif - platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1713,18 +2119,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart1_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) diff --git a/arch/blackfin/mach-bf609/include/mach/gpio.h b/arch/blackfin/mach-bf609/include/mach/gpio.h index c32c8cc8db2..07182513e79 100644 --- a/arch/blackfin/mach-bf609/include/mach/gpio.h +++ b/arch/blackfin/mach-bf609/include/mach/gpio.h @@ -152,14 +152,6 @@ struct gpio_port_t { unsigned long revid; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf609/include/mach/irq.h b/arch/blackfin/mach-bf609/include/mach/irq.h index fa0843d5d77..d1cb6a86f80 100644 --- a/arch/blackfin/mach-bf609/include/mach/irq.h +++ b/arch/blackfin/mach-bf609/include/mach/irq.h @@ -298,7 +298,7 @@ extern u8 sec_int_priority[]; /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h index 2e1a51c2509..c48bb71a55c 100644 --- a/arch/blackfin/mach-bf609/include/mach/portmux.h +++ b/arch/blackfin/mach-bf609/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - /* EMAC RMII Port Mux */ #define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) #define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) @@ -21,6 +19,7 @@ #define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) #define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) #define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) +#define P_MII0_PTPPPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) #define P_RMII0 {\ P_MII0_ETxD0, \ @@ -32,6 +31,7 @@ P_MII0_TxCLK, \ P_MII0_PHYINT, \ P_MII0_CRS, \ + P_MII0_PTPPPS, \ P_MII0_MDC, \ P_MII0_MDIO, 0} @@ -46,6 +46,7 @@ #define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) #define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) #define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_MII1_PTPPPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) #define P_RMII1 {\ P_MII1_ETxD0, \ @@ -57,6 +58,7 @@ P_MII1_TxCLK, \ P_MII1_PHYINT, \ P_MII1_CRS, \ + P_MII1_PTPPPS, \ P_MII1_MDC, \ P_MII1_MDIO, 0} diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index d143fd8d2bc..ca75613231c 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -704,10 +704,9 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) __irq_set_handler_locked(irq, handle); } -static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); -extern void bfin_gpio_irq_prepare(unsigned gpio); +#ifdef CONFIG_GPIO_ADI -#if !BFIN_GPIO_PINT +static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); static void bfin_gpio_ack_irq(struct irq_data *d) { @@ -821,15 +820,6 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) return 0; } -#ifdef CONFIG_PM -static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) -{ - return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); -} -#else -# define bfin_gpio_set_wake NULL -#endif - static void bfin_demux_gpio_block(unsigned int irq) { unsigned int gpio, mask; @@ -896,279 +886,40 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, bfin_demux_gpio_block(irq); } -#else - -#define NR_PINT_BITS 32 -#define IRQ_NOT_AVAIL 0xFF - -#define PINT_2_BANK(x) ((x) >> 5) -#define PINT_2_BIT(x) ((x) & 0x1F) -#define PINT_BIT(x) (1 << (PINT_2_BIT(x))) - -static unsigned char irq2pint_lut[NR_PINTS]; -static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; - -static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = { - (struct bfin_pint_regs *)PINT0_MASK_SET, - (struct bfin_pint_regs *)PINT1_MASK_SET, - (struct bfin_pint_regs *)PINT2_MASK_SET, - (struct bfin_pint_regs *)PINT3_MASK_SET, -#ifdef CONFIG_BF60x - (struct bfin_pint_regs *)PINT4_MASK_SET, - (struct bfin_pint_regs *)PINT5_MASK_SET, -#endif -}; - -inline unsigned int get_irq_base(u32 bank, u8 bmap) -{ - unsigned int irq_base; - -#ifndef CONFIG_BF60x - if (bank < 2) { /*PA-PB */ - irq_base = IRQ_PA0 + bmap * 16; - } else { /*PC-PJ */ - irq_base = IRQ_PC0 + bmap * 16; - } -#else - irq_base = IRQ_PA0 + bank * 16 + bmap * 16; -#endif - return irq_base; -} - - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ -void init_pint_lut(void) -{ - u16 bank, bit, irq_base, bit_pos; - u32 pint_assign; - u8 bmap; - - memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut)); - - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - - pint_assign = pint[bank]->assign; - - for (bit = 0; bit < NR_PINT_BITS; bit++) { - - bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF; - - irq_base = get_irq_base(bank, bmap); - - irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0); - bit_pos = bit + bank * NR_PINT_BITS; - - pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; - irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; - } - } -} - -static void bfin_gpio_ack_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } - pint[bank]->request = pintbit; - -} - -static void bfin_gpio_mask_ack_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } - - pint[bank]->request = pintbit; - pint[bank]->mask_clear = pintbit; -} - -static void bfin_gpio_mask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - - pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); -} - -static void bfin_gpio_unmask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - pint[bank]->mask_set = pintbit; -} - -static unsigned int bfin_gpio_irq_startup(struct irq_data *d) -{ - unsigned int irq = d->irq; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - - if (pint_val == IRQ_NOT_AVAIL) { - printk(KERN_ERR - "GPIO IRQ %d :Not in PINT Assign table " - "Reconfigure Interrupt to Port Assignemt\n", irq); - return -ENODEV; - } - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - bfin_gpio_unmask_irq(d); - - return 0; -} - -static void bfin_gpio_irq_shutdown(struct irq_data *d) -{ - u32 gpionr = irq_to_gpio(d->irq); - - bfin_gpio_mask_irq(d); - __clear_bit(gpionr, gpio_enabled); - bfin_gpio_irq_free(gpionr); -} - -static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - unsigned int irq = d->irq; - int ret; - char buf[16]; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (pint_val == IRQ_NOT_AVAIL) - return -ENODEV; - - if (type == IRQ_TYPE_PROBE) { - /* only probe unenabled GPIO interrupt lines */ - if (test_bit(gpionr, gpio_enabled)) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | - IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - - snprintf(buf, 16, "gpio-irq%d", irq); - ret = bfin_gpio_irq_request(gpionr, buf); - if (ret) - return ret; - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - } else { - __clear_bit(gpionr, gpio_enabled); - return 0; - } - - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) - pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ - else - pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - - if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - if (gpio_get_value(gpionr)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_clear = pintbit; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - bfin_set_irq_handler(irq, handle_edge_irq); - } else { - pint[bank]->edge_clear = pintbit; - bfin_set_irq_handler(irq, handle_level_irq); - } - - return 0; -} - #ifdef CONFIG_PM -static struct bfin_pm_pint_save save_pint_reg[NR_PINT_SYS_IRQS]; -static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { - u32 pint_irq; - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 bank = PINT_2_BANK(pint_val); - - switch (bank) { - case 0: - pint_irq = IRQ_PINT0; - break; - case 2: - pint_irq = IRQ_PINT2; - break; - case 3: - pint_irq = IRQ_PINT3; - break; - case 1: - pint_irq = IRQ_PINT1; - break; -#ifdef CONFIG_BF60x - case 4: - pint_irq = IRQ_PINT4; - break; - case 5: - pint_irq = IRQ_PINT5; - break; -#endif - default: - return -EINVAL; - } + return bfin_gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); +} -#ifndef SEC_GCTL - bfin_internal_set_wake(pint_irq, state); -#endif +#else - return 0; -} +# define bfin_gpio_set_wake NULL -void bfin_pint_suspend(void) -{ - u32 bank; +#endif - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - save_pint_reg[bank].mask_set = pint[bank]->mask_set; - save_pint_reg[bank].assign = pint[bank]->assign; - save_pint_reg[bank].edge_set = pint[bank]->edge_set; - save_pint_reg[bank].invert_set = pint[bank]->invert_set; - } -} +static struct irq_chip bfin_gpio_irqchip = { + .name = "GPIO", + .irq_ack = bfin_gpio_ack_irq, + .irq_mask = bfin_gpio_mask_irq, + .irq_mask_ack = bfin_gpio_mask_ack_irq, + .irq_unmask = bfin_gpio_unmask_irq, + .irq_disable = bfin_gpio_mask_irq, + .irq_enable = bfin_gpio_unmask_irq, + .irq_set_type = bfin_gpio_irq_type, + .irq_startup = bfin_gpio_irq_startup, + .irq_shutdown = bfin_gpio_irq_shutdown, + .irq_set_wake = bfin_gpio_set_wake, +}; -void bfin_pint_resume(void) -{ - u32 bank; +#endif - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - pint[bank]->mask_set = save_pint_reg[bank].mask_set; - pint[bank]->assign = save_pint_reg[bank].assign; - pint[bank]->edge_set = save_pint_reg[bank].edge_set; - pint[bank]->invert_set = save_pint_reg[bank].invert_set; - } -} +#ifdef CONFIG_PM #ifdef SEC_GCTL +static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; + static int sec_suspend(void) { u32 bank; @@ -1195,92 +946,10 @@ static struct syscore_ops sec_pm_syscore_ops = { .suspend = sec_suspend, .resume = sec_resume, }; - -#endif -#else -# define bfin_gpio_set_wake NULL -#endif - -void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) -{ - u32 bank, pint_val; - u32 request, irq; - u32 level_mask; - int umask = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } - - switch (inta_irq) { - case IRQ_PINT0: - bank = 0; - break; - case IRQ_PINT2: - bank = 2; - break; - case IRQ_PINT3: - bank = 3; - break; - case IRQ_PINT1: - bank = 1; - break; -#ifdef CONFIG_BF60x - case IRQ_PINT4: - bank = 4; - break; - case IRQ_PINT5: - bank = 5; - break; #endif - default: - return; - } - - pint_val = bank * NR_PINT_BITS; - - request = pint[bank]->request; - - level_mask = pint[bank]->edge_set & request; - - while (request) { - if (request & 1) { - irq = pint2irq_lut[pint_val] + SYS_IRQS; - if (level_mask & PINT_BIT(pint_val)) { - umask = 1; - chip->irq_unmask(&desc->irq_data); - } - bfin_handle_irq(irq); - } - pint_val++; - request >>= 1; - } - if (!umask) - chip->irq_unmask(&desc->irq_data); -} #endif -static struct irq_chip bfin_gpio_irqchip = { - .name = "GPIO", - .irq_ack = bfin_gpio_ack_irq, - .irq_mask = bfin_gpio_mask_irq, - .irq_mask_ack = bfin_gpio_mask_ack_irq, - .irq_unmask = bfin_gpio_unmask_irq, - .irq_disable = bfin_gpio_mask_irq, - .irq_enable = bfin_gpio_unmask_irq, - .irq_set_type = bfin_gpio_irq_type, - .irq_startup = bfin_gpio_irq_startup, - .irq_shutdown = bfin_gpio_irq_shutdown, - .irq_set_wake = bfin_gpio_set_wake, -}; - void init_exception_vectors(void) { /* cannot program in software: @@ -1331,17 +1000,6 @@ int __init init_arch_irq(void) local_irq_disable(); -#if BFIN_GPIO_PINT -# ifdef CONFIG_PINTx_REASSIGN - pint[0]->assign = CONFIG_PINT0_ASSIGN; - pint[1]->assign = CONFIG_PINT1_ASSIGN; - pint[2]->assign = CONFIG_PINT2_ASSIGN; - pint[3]->assign = CONFIG_PINT3_ASSIGN; -# endif - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ - init_pint_lut(); -#endif - for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) irq_set_chip(irq, &bfin_core_irqchip); @@ -1349,12 +1007,8 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#if BFIN_GPIO_PINT - case IRQ_PINT0: - case IRQ_PINT1: - case IRQ_PINT2: - case IRQ_PINT3: -#elif defined(BF537_FAMILY) +#if !BFIN_GPIO_PINT +#if defined(BF537_FAMILY) case IRQ_PH_INTA_MAC_RX: case IRQ_PF_INTA_PG_INTA: #elif defined(BF533_FAMILY) @@ -1372,6 +1026,7 @@ int __init init_arch_irq(void) #endif irq_set_chained_handler(irq, bfin_demux_gpio_irq); break; +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) case IRQ_MAC_ERROR: irq_set_chained_handler(irq, @@ -1419,10 +1074,12 @@ int __init init_arch_irq(void) handle_level_irq); #endif /* if configured as edge, then will be changed to do_edge_IRQ */ +#ifdef CONFIG_GPIO_ADI for (irq = GPIO_IRQ_BASE; irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); +#endif bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -1525,19 +1182,6 @@ int __init init_arch_irq(void) local_irq_disable(); -#if BFIN_GPIO_PINT -# ifdef CONFIG_PINTx_REASSIGN - pint[0]->assign = CONFIG_PINT0_ASSIGN; - pint[1]->assign = CONFIG_PINT1_ASSIGN; - pint[2]->assign = CONFIG_PINT2_ASSIGN; - pint[3]->assign = CONFIG_PINT3_ASSIGN; - pint[4]->assign = CONFIG_PINT4_ASSIGN; - pint[5]->assign = CONFIG_PINT5_ASSIGN; -# endif - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ - init_pint_lut(); -#endif - for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) { irq_set_chip_and_handler(irq, &bfin_core_irqchip, @@ -1546,9 +1190,6 @@ int __init init_arch_irq(void) if (irq == IRQ_CORETMR) irq_set_handler(irq, handle_percpu_irq); #endif - } else if (irq >= BFIN_IRQ(21) && irq <= BFIN_IRQ(26)) { - irq_set_chip(irq, &bfin_sec_irqchip); - irq_set_chained_handler(irq, bfin_demux_gpio_irq); } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { irq_set_chip_and_handler(irq, &bfin_sec_irqchip, handle_percpu_irq); @@ -1563,10 +1204,6 @@ int __init init_arch_irq(void) __irq_set_preflow_handler(irq, bfin_sec_preflow_handler); } } - for (irq = GPIO_IRQ_BASE; - irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) - irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, - handle_level_irq); bfin_write_IMASK(0); CSYNC(); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 87bfe549ad3..1387a94bcfd 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -27,7 +27,7 @@ struct bfin_cpu_pm_fns *bfin_cpu_pm; void bfin_pm_suspend_standby_enter(void) { -#ifndef CONFIG_BF60x +#if !BFIN_GPIO_PINT bfin_pm_standby_setup(); #endif @@ -41,7 +41,7 @@ void bfin_pm_suspend_standby_enter(void) # endif #endif -#ifndef CONFIG_BF60x +#if !BFIN_GPIO_PINT bfin_pm_standby_restore(); #endif @@ -128,6 +128,7 @@ static void flushinv_all_dcache(void) if ((status & 0x3) != 0x3) continue; + /* construct the address using the tag */ addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); @@ -140,11 +141,14 @@ static void flushinv_all_dcache(void) int bfin_pm_suspend_mem_enter(void) { - int wakeup, ret; + int ret; +#ifndef CONFIG_BF60x + int wakeup; +#endif unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, - GFP_KERNEL); + GFP_ATOMIC); if (memptr == NULL) { panic("bf53x_suspend_l1_mem malloc failed"); @@ -170,10 +174,8 @@ int bfin_pm_suspend_mem_enter(void) return ret; } +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_suspend(); - -#if BFIN_GPIO_PINT - bfin_pint_suspend(); #endif #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) @@ -194,11 +196,9 @@ int bfin_pm_suspend_mem_enter(void) _enable_icplb(); _enable_dcplb(); -#if BFIN_GPIO_PINT - bfin_pint_resume(); -#endif - +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_restore(); +#endif blackfin_dma_resume(); kfree(memptr); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 82f301c117a..2bbae078381 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -146,6 +146,7 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) platform_clear_ipi(cpu, IRQ_SUPPLE_1); + smp_rmb(); bfin_ipi_data = &__get_cpu_var(bfin_ipi); while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) { msg = 0; @@ -161,18 +162,20 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) case BFIN_IPI_CALL_FUNC: generic_smp_call_function_interrupt(); break; - case BFIN_IPI_CALL_FUNC_SINGLE: generic_smp_call_function_single_interrupt(); break; - case BFIN_IPI_CPU_STOP: ipi_cpu_stop(cpu); break; + default: + goto out; } atomic_dec(&bfin_ipi_data->count); } while (msg < BITS_PER_LONG); + } +out: return IRQ_HANDLED; } @@ -198,10 +201,11 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) bfin_ipi_data = &per_cpu(bfin_ipi, cpu); atomic_set_mask((1 << msg), &bfin_ipi_data->bits); atomic_inc(&bfin_ipi_data->count); - platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } - local_irq_restore(flags); + smp_wmb(); + for_each_cpu(cpu, cpumask) + platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } void arch_send_call_function_single_ipi(int cpu) |