diff options
Diffstat (limited to 'arch/blackfin')
| -rw-r--r-- | arch/blackfin/include/asm/bfin_spi3.h (renamed from arch/blackfin/include/asm/bfin6xx_spi.h) | 4 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 18 |
2 files changed, 11 insertions, 11 deletions
diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin_spi3.h index 89370b653dc..0957e65a54b 100644 --- a/arch/blackfin/include/asm/bfin6xx_spi.h +++ b/arch/blackfin/include/asm/bfin_spi3.h @@ -240,7 +240,7 @@ struct bfin_spi_regs { #define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ -struct bfin6xx_spi_master { +struct bfin_spi3_master { u16 num_chipselect; u16 pin_req[7]; }; @@ -248,7 +248,7 @@ struct bfin6xx_spi_master { /* spi_board_info.controller_data for SPI slave devices, * copied to spi_device.platform_data ... mostly for dma tuning */ -struct bfin6xx_spi_chip { +struct bfin_spi3_chip { u32 control; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ u32 tx_dummy_val; /* tx value for rx only transfer */ diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 97d70163958..6939ac3a805 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -17,7 +17,7 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> -#include <asm/bfin6xx_spi.h> +#include <asm/bfin_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -745,13 +745,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin6xx_spi_chip spi_flash_chip_info = { +static struct bfin_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin6xx_spi_chip spidev_chip_info = { +static struct bfin_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1296,7 +1296,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1337,13 +1337,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin6xx_spi_master bf60x_spi_master_info0 = { +static struct bfin_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi", + .name = "bfin-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1352,13 +1352,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin6xx_spi_master bf60x_spi_master_info1 = { +static struct bfin_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi", + .name = "bfin-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1534,7 +1534,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif |