diff options
Diffstat (limited to 'arch/blackfin')
| -rw-r--r-- | arch/blackfin/include/asm/bfin_spi3.h | 258 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 22 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf609/clock.c | 7 |
3 files changed, 18 insertions, 269 deletions
diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/arch/blackfin/include/asm/bfin_spi3.h deleted file mode 100644 index 0957e65a54b..00000000000 --- a/arch/blackfin/include/asm/bfin_spi3.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Analog Devices SPI3 controller driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ - -#include <linux/types.h> - -/* SPI_CONTROL */ -#define SPI_CTL_EN 0x00000001 /* Enable */ -#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ -#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ -#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ -#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ -#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ -#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ -#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ -#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ -#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ -#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ -#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ -#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ -#define SPI_CTL_LSBF 0x00001000 /* LSB First */ -#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ -#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ -#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ -#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ -#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ -#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ -#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ -#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ -#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ -#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ -#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ -#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ -#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ -/* SPI_RX_CONTROL */ -#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ -#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ -#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ -#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ -#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ -#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ -#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ -#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ -#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ -#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ -#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ -#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ -#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ -#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ -#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ -#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ -#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ -#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ -#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ -#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ -/* SPI_TX_CONTROL */ -#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ -#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ -#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ -#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ -#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ -#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ -#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ -#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ -#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ -#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ -#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ -#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ -#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ -#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ -#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ -#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ -#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ -#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ -#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ -#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ -/* SPI_CLOCK */ -#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ -/* SPI_DELAY */ -#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ -#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ -#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ -/* SPI_SSEL */ -#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ -#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ -#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ -#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ -#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ -#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ -#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ -#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ -#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ -#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ -#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ -#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ -#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ -#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ -/* SPI_RWC */ -#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ -/* SPI_RWCR */ -#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ -/* SPI_TWC */ -#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ -/* SPI_TWCR */ -#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ -/* SPI_IMASK */ -#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKCL */ -#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKST */ -#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_STATUS */ -#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ -#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ -#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ -#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ -#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ -#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ -#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ -#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ -#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ -#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ -#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ -#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ -#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ -#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ -#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ -#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ -#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ -#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ -#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ -#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ -#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ -#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ -#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ -/* SPI_ILAT */ -#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ -/* SPI_ILATCL */ -#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ - -/* - * bfin spi3 registers layout - */ -struct bfin_spi_regs { - u32 revid; - u32 control; - u32 rx_control; - u32 tx_control; - u32 clock; - u32 delay; - u32 ssel; - u32 rwc; - u32 rwcr; - u32 twc; - u32 twcr; - u32 reserved0; - u32 emask; - u32 emaskcl; - u32 emaskst; - u32 reserved1; - u32 status; - u32 elat; - u32 elatcl; - u32 reserved2; - u32 rfifo; - u32 reserved3; - u32 tfifo; -}; - -#define MAX_CTRL_CS 8 /* cs in spi controller */ - -/* device.platform_data for SSP controller devices */ -struct bfin_spi3_master { - u16 num_chipselect; - u16 pin_req[7]; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct bfin_spi3_chip { - u32 control; - u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 tx_dummy_val; /* tx value for rx only transfer */ - bool enable_dma; -}; - -#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 943f7e95ec1..1ba4600de69 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -20,7 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-adi2.h> -#include <asm/bfin_spi3.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin_spi3_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if IS_ENABLED(CONFIG_SPI_SPIDEV) -static struct bfin_spi3_chip spidev_chip_info = { +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin_spi3_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin_spi3_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif @@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 56200f37cfc..244fa4ab4c5 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -363,6 +363,12 @@ static struct clk ethclk = { .ops = &dummy_clk_ops, }; +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + static struct clk_lookup bf609_clks[] = { CLK(sys_clkin, NULL, "SYS_CLKIN"), CLK(pll_clk, NULL, "PLLCLK"), @@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = { CLK(dclk, NULL, "DCLK"), CLK(oclk, NULL, "OCLK"), CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), }; int __init clk_init(void) |