diff options
Diffstat (limited to 'arch/blackfin')
151 files changed, 1815 insertions, 3054 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8ea0d942cde..7faa2f554ab 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -274,7 +274,7 @@ config BF_REV_0_0 config BF_REV_0_1 bool "0.1" - depends on (BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM)) config BF_REV_0_2 bool "0.2" @@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD) + depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP) default y config MEM_MT48LC32M8A2_75 @@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75 depends on (BFIN518F_EZBRD) default y +config MEM_MT48H32M16LFCJ_75 + bool + depends on (BFIN526_EZBRD) + default y + source "arch/blackfin/mach-bf518/Kconfig" source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" @@ -623,7 +628,6 @@ choice config TICKSOURCE_GPTMR0 bool "Gptimer0 (SCLK domain)" select BFIN_GPTIMERS - depends on !IPIPE config TICKSOURCE_CORETMR bool "Core timer (CCLK domain)" @@ -644,6 +648,7 @@ config CYCLES_CLOCKSOURCE config GPTMR0_CLOCKSOURCE bool "Use GPTimer0 as a clocksource (higher rating)" + select BFIN_GPTIMERS depends on GENERIC_CLOCKEVENTS depends on !TICKSOURCE_GPTMR0 @@ -908,23 +913,41 @@ endchoice comment "Cache Support" + config BFIN_ICACHE bool "Enable ICACHE" + default y +config BFIN_ICACHE_LOCK + bool "Enable Instruction Cache Locking" + depends on BFIN_ICACHE + default n +config BFIN_EXTMEM_ICACHEABLE + bool "Enable ICACHE for external memory" + depends on BFIN_ICACHE + default y +config BFIN_L2_ICACHEABLE + bool "Enable ICACHE for L2 SRAM" + depends on BFIN_ICACHE + depends on BF54x || BF561 + default n + config BFIN_DCACHE bool "Enable DCACHE" + default y config BFIN_DCACHE_BANKA bool "Enable only 16k BankA DCACHE - BankB is SRAM" depends on BFIN_DCACHE && !BF531 default n -config BFIN_ICACHE_LOCK - bool "Enable Instruction Cache Locking" - -choice - prompt "External memory cache policy" +config BFIN_EXTMEM_DCACHEABLE + bool "Enable DCACHE for external memory" depends on BFIN_DCACHE - default BFIN_WB if !SMP - default BFIN_WT if SMP -config BFIN_WB + default y +choice + prompt "External memory DCACHE policy" + depends on BFIN_EXTMEM_DCACHEABLE + default BFIN_EXTMEM_WRITEBACK if !SMP + default BFIN_EXTMEM_WRITETHROUGH if SMP +config BFIN_EXTMEM_WRITEBACK bool "Write back" depends on !SMP help @@ -942,7 +965,7 @@ config BFIN_WB If you are unsure of the options and you want to be safe, then go with Write Through. -config BFIN_WT +config BFIN_EXTMEM_WRITETHROUGH bool "Write through" help Write Back Policy: @@ -961,23 +984,26 @@ config BFIN_WT endchoice +config BFIN_L2_DCACHEABLE + bool "Enable DCACHE for L2 SRAM" + depends on BFIN_DCACHE + depends on BF54x || BF561 + default n choice - prompt "L2 SRAM cache policy" - depends on (BF54x || BF561) - default BFIN_L2_WT -config BFIN_L2_WB + prompt "L2 SRAM DCACHE policy" + depends on BFIN_L2_DCACHEABLE + default BFIN_L2_WRITEBACK +config BFIN_L2_WRITEBACK bool "Write back" depends on !SMP -config BFIN_L2_WT +config BFIN_L2_WRITETHROUGH bool "Write through" depends on !SMP - -config BFIN_L2_NOT_CACHED - bool "Not cached" - endchoice + +comment "Memory Protection Unit" config MPU bool "Enable the memory protection unit (EXPERIMENTAL)" default n diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index 3ab6f23561d..fd9ccc5fea1 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ + -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ -d $< $@ diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index baec1337f28..dcfb4889559 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -326,11 +326,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -413,11 +419,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -916,7 +922,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set CONFIG_SDH_BFIN=m CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y -CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y +# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1147,7 +1153,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index c06262e41f7..48a3a7a9099 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -331,16 +331,18 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_MPU is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set # -# Asynchonous Memory Configuration +# Memory Protection Unit # +# CONFIG_MPU is not set # # EBIU_AMGCTL Global Control @@ -418,11 +420,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1424,7 +1426,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index e9175c608aa..dd8352791da 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -331,11 +331,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -418,11 +424,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1505,7 +1511,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 5aa63bafdd6..4c044805cb5 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -292,12 +292,21 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # +# +# Cache Support +# CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -391,11 +400,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1052,7 +1061,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index fed25329e13..c99bbcd09a6 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -293,11 +293,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -391,11 +397,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1216,7 +1222,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index f9ac20d5579..092ffda80e6 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -300,11 +300,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -399,11 +405,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1269,7 +1275,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index ee98e227b88..fa698a89f6f 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -311,11 +311,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -398,11 +404,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1203,7 +1209,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index deeabef8ab8..b3d3cab81cf 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -366,14 +366,19 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_WB is not set -CONFIG_BFIN_L2_WT=y -# CONFIG_BFIN_L2_NOT_CACHED is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -459,11 +464,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1606,7 +1611,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index dcfbe2e2931..0313cd1d982 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -331,14 +331,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -# CONFIG_BFIN_L2_WB is not set -CONFIG_BFIN_L2_WT=y -# CONFIG_BFIN_L2_NOT_CACHED is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -425,11 +430,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1044,7 +1049,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 174c578b8ec..5d944ffd4ab 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -285,11 +285,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index e17875e8abe..648a31d01bf 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -329,11 +329,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -417,11 +423,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1246,7 +1252,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index fafd95e84b2..ae665b93b87 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -262,12 +262,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -353,10 +358,10 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -873,7 +878,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index e73aa5af58b..d74b6f4db35 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -297,11 +297,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -383,11 +389,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -861,7 +867,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 80211303f6b..7fc8dfa1719 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -270,12 +270,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -361,10 +366,10 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -901,7 +906,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index dd815f0d151..acca4e51a45 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -333,12 +333,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -428,11 +435,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -1334,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 16c198bd40c..bae4ee6e68b 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -308,12 +308,19 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set +# CONFIG_BFIN_L2_ICACHEABLE is not set +# CONFIG_BFIN_L2_DCACHEABLE is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -395,11 +402,11 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -837,7 +844,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 6b4c1a98238..a6a7c8ede70 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -258,12 +258,18 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -CONFIG_BFIN_ICACHE_LOCK=y -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set # # Asynchonous Memory Configuration diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 09701f907e9..ff377fae061 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -295,11 +295,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -382,11 +388,11 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG is not set CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index ec84a53daae..814f9cacf40 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -279,12 +279,18 @@ CONFIG_DMA_UNCACHED_2M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# +# CONFIG_MPU is not set # # Asynchonous Memory Configuration diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 6e2796240fd..375e75a27ab 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -287,11 +287,17 @@ CONFIG_DMA_UNCACHED_1M=y # Cache Support # CONFIG_BFIN_ICACHE=y +# CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set -# CONFIG_BFIN_ICACHE_LOCK is not set -CONFIG_BFIN_WB=y -# CONFIG_BFIN_WT is not set +CONFIG_BFIN_EXTMEM_ICACHEABLE=y +CONFIG_BFIN_EXTMEM_DCACHEABLE=y +CONFIG_BFIN_EXTMEM_WRITEBACK=y +# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set + +# +# Memory Protection Unit +# # CONFIG_MPU is not set # @@ -709,7 +715,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index b1d92f13ef9..88f36d599fe 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -1,24 +1,21 @@ #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ +#ifndef CONFIG_SMP +# include <asm-generic/atomic.h> +#else + #include <linux/types.h> #include <asm/system.h> /* local_irq_XXX() */ /* * Atomic operations that C can't guarantee us. Useful for * resource counting etc.. - * - * Generally we do not concern about SMP BFIN systems, so we don't have - * to deal with that. - * - * Tony Kou (tonyko@lineo.ca) Lineo Inc. 2001 */ #define ATOMIC_INIT(i) { (i) } #define atomic_set(v, i) (((v)->counter) = i) -#ifdef CONFIG_SMP - #define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter) asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); @@ -84,100 +81,6 @@ static inline int atomic_test_mask(int mask, atomic_t *v) #define smp_mb__before_atomic_inc() barrier() #define smp_mb__after_atomic_inc() barrier() -#else /* !CONFIG_SMP */ - -#define atomic_read(v) ((v)->counter) - -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter += i; - local_irq_restore_hw(flags); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter -= i; - local_irq_restore_hw(flags); - -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int __temp = 0; - unsigned long flags; - - local_irq_save_hw(flags); - v->counter += i; - __temp = v->counter; - local_irq_restore_hw(flags); - - - return __temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int __temp = 0; - unsigned long flags; - - local_irq_save_hw(flags); - v->counter -= i; - __temp = v->counter; - local_irq_restore_hw(flags); - - return __temp; -} - -static inline void atomic_inc(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter++; - local_irq_restore_hw(flags); -} - -static inline void atomic_dec(volatile atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter--; - local_irq_restore_hw(flags); -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter &= ~mask; - local_irq_restore_hw(flags); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save_hw(flags); - v->counter |= mask; - local_irq_restore_hw(flags); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#endif /* !CONFIG_SMP */ - #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) @@ -210,4 +113,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) #include <asm-generic/atomic-long.h> -#endif /* __ARCH_BLACKFIN_ATOMIC __ */ +#endif + +#endif diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h index 215506cd87b..41fa68b7128 100644 --- a/arch/blackfin/include/asm/auxvec.h +++ b/arch/blackfin/include/asm/auxvec.h @@ -1,4 +1 @@ -#ifndef __ASMBFIN_AUXVEC_H -#define __ASMBFIN_AUXVEC_H - -#endif +#include <asm-generic/auxvec.h> diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 75fee2f7d9f..daffa71576d 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -1,26 +1,22 @@ #ifndef _BLACKFIN_BITOPS_H #define _BLACKFIN_BITOPS_H -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#ifdef __KERNEL__ +#ifndef CONFIG_SMP +# include <asm-generic/bitops.h> +#else #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly #endif +#include <linux/compiler.h> +#include <asm/byteorder.h> /* swab32 */ + #include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/__ffs.h> #include <asm-generic/bitops/sched.h> #include <asm-generic/bitops/ffz.h> -#ifdef CONFIG_SMP - #include <linux/linkage.h> asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr); @@ -79,189 +75,13 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -#else /* !CONFIG_SMP */ - -#include <asm/system.h> /* save_flags */ - -static inline void set_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - unsigned long flags; - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - *a |= mask; - local_irq_restore_hw(flags); -} - -static inline void clear_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - unsigned long flags; - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - *a &= ~mask; - local_irq_restore_hw(flags); -} - -static inline void change_bit(int nr, volatile unsigned long *addr) -{ - int mask; - unsigned long flags; - unsigned long *ADDR = (unsigned long *)addr; - - ADDR += nr >> 5; - mask = 1 << (nr & 31); - local_irq_save_hw(flags); - *ADDR ^= mask; - local_irq_restore_hw(flags); -} - -static inline int test_and_set_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore_hw(flags); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore_hw(flags); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save_hw(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore_hw(flags); - return retval; -} - -#endif /* CONFIG_SMP */ - /* * clear_bit() doesn't provide any barrier for the compiler. */ #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() -static inline void __set_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a |= mask; -} - -static inline void __clear_bit(int nr, volatile unsigned long *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a &= ~mask; -} - -static inline void __change_bit(int nr, volatile unsigned long *addr) -{ - int mask; - unsigned long *ADDR = (unsigned long *)addr; - - ADDR += nr >> 5; - mask = 1 << (nr & 31); - *ADDR ^= mask; -} - -static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a |= mask; - return retval; -} - -static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a &= ~mask; - return retval; -} - -static inline int __test_and_change_bit(int nr, - volatile unsigned long *addr) -{ - int mask, retval; - volatile unsigned int *a = (volatile unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a ^= mask; - return retval; -} - -static inline int __test_bit(int nr, const void *addr) -{ - int *a = (int *)addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#ifndef CONFIG_SMP -/* - * This routine doesn't need irq save and restore ops in UP - * context. - */ -static inline int test_bit(int nr, const void *addr) -{ - return __test_bit(nr, addr); -} -#endif +#include <asm-generic/bitops/non-atomic.h> #include <asm-generic/bitops/find.h> #include <asm-generic/bitops/hweight.h> @@ -272,10 +92,10 @@ static inline int test_bit(int nr, const void *addr) #include <asm-generic/bitops/minix.h> -#endif /* __KERNEL__ */ - #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/__fls.h> #include <asm-generic/bitops/fls64.h> +#endif /* CONFIG_SMP */ + #endif /* _BLACKFIN_BITOPS_H */ diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 8bb2cb13975..4d443958339 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -86,6 +86,7 @@ static inline void CSYNC(void) #endif /* __ASSEMBLY__ */ +#include <asm/mem_map.h> #include <mach/blackfin.h> #include <asm/bfin-global.h> diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h index 9093c9c1fb8..61791e1ad9f 100644 --- a/arch/blackfin/include/asm/bugs.h +++ b/arch/blackfin/include/asm/bugs.h @@ -1,16 +1 @@ -/* - * include/asm-blackfin/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} +#include <asm-generic/bugs.h> diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index 2ef669ed922..477050ad5c5 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -35,10 +35,10 @@ #if defined(CONFIG_SMP) && \ !defined(CONFIG_BFIN_CACHE_COHERENT) -# if defined(CONFIG_BFIN_ICACHE) +# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE) # define __ARCH_SYNC_CORE_ICACHE # endif -# if defined(CONFIG_BFIN_DCACHE) +# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE) # define __ARCH_SYNC_CORE_DCACHE # endif #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 5c17dee53b5..7e55549e180 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -56,7 +56,7 @@ extern void blackfin_invalidate_entire_icache(void); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BFIN_WB) +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) blackfin_dcache_flush_range(start, end); #endif @@ -87,9 +87,9 @@ do { memcpy(dst, src, len); \ #else # define invalidate_dcache_range(start,end) do { } while (0) #endif -#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB) +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) # define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) -# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) +# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) #else # define flush_dcache_range(start,end) do { } while (0) # define flush_dcache_page(page) do { } while (0) @@ -100,7 +100,7 @@ extern unsigned long reserved_mem_icache_on; static inline int bfin_addr_dcacheable(unsigned long addr) { -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE if (addr < (_ramend - DMA_UNCACHED_REGION)) return 1; #endif @@ -109,7 +109,7 @@ static inline int bfin_addr_dcacheable(unsigned long addr) addr >= _ramend && addr < physical_mem_end) return 1; -#ifndef CONFIG_BFIN_L2_NOT_CACHED +#ifdef CONFIG_BFIN_L2_DCACHEABLE if (addr >= L2_START && addr < L2_START + L2_LENGTH) return 1; #endif diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 16561ab18b3..f8a664f022b 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -223,9 +223,10 @@ [--sp] = RETN; [--sp] = RETE; [--sp] = SEQSTAT; -#ifdef CONFIG_KGDB - r1.l = lo(IPEND); - r1.h = hi(IPEND); +#ifdef CONFIG_DEBUG_KERNEL + p1.l = lo(IPEND); + p1.h = hi(IPEND); + r1 = [p1]; [--sp] = r1; #else [--sp] = r0; /* Skip IPEND as well. */ diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index a75a6a9f094..c5dacf8f8cf 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -37,8 +37,6 @@ #define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) -/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ - #if ANOMALY_05000158 #define ANOMALY_05000158_WORKAROUND 0x200 #else @@ -47,10 +45,12 @@ #define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#ifdef CONFIG_BFIN_WB /*Write Back Policy */ +#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON) -#else /*Write Through */ +#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH) #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +#else +#define SDRAM_DGENERIC (CPLB_COMMON) #endif #define SDRAM_DNON_CHBL (CPLB_COMMON) @@ -61,21 +61,23 @@ #ifdef CONFIG_SMP #define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (CPLB_COMMON) -#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON) +#define L2_IMEMORY (CPLB_COMMON | PAGE_SIZE_1MB) +#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB) #else #define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) -#define L2_IMEMORY (SDRAM_IGENERIC) - -# if defined(CONFIG_BFIN_L2_WB) -# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON) -# elif defined(CONFIG_BFIN_L2_WT) -# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) -# elif defined(CONFIG_BFIN_L2_NOT_CACHED) -# define L2_DMEMORY (CPLB_COMMON) +# if defined(CONFIG_BFIN_L2_ICACHEABLE) +# define L2_IMEMORY (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB) +# else +# define L2_IMEMORY ( CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB) +# endif + +# if defined(CONFIG_BFIN_L2_WRITEBACK) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB) +# elif defined(CONFIG_BFIN_L2_WRITETHROUGH) +# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB) # else -# define L2_DMEMORY (0) +# define L2_DMEMORY (CPLB_COMMON | PAGE_SIZE_1MB) # endif #endif /* CONFIG_SMP */ diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index 565b8136855..fadfa82f93b 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -32,7 +32,6 @@ struct blackfin_cpudata { struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; - unsigned long loops_per_jiffy; unsigned long dcache_invld_count; unsigned long icache_invld_count; }; diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h index 2b19705f988..6d68ad7e0ea 100644 --- a/arch/blackfin/include/asm/cputime.h +++ b/arch/blackfin/include/asm/cputime.h @@ -1,6 +1 @@ -#ifndef __BLACKFIN_CPUTIME_H -#define __BLACKFIN_CPUTIME_H - #include <asm-generic/cputime.h> - -#endif /* __BLACKFIN_CPUTIME_H */ diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h index 31918d29122..4c51401b553 100644 --- a/arch/blackfin/include/asm/current.h +++ b/arch/blackfin/include/asm/current.h @@ -1,23 +1 @@ -#ifndef _BLACKFIN_CURRENT_H -#define _BLACKFIN_CURRENT_H -/* - * current.h - * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com> - * - * rather than dedicate a register (as the m68k source does), we - * just keep a global, we should probably just change it all to be - * current and lose _current_task. - */ -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct *get_current(void) __attribute__ ((__const__)); -static inline struct task_struct *get_current(void) -{ - return (current_thread_info()->task); -} - -#define current (get_current()) - -#endif /* _BLACKFIN_CURRENT_H */ +#include <asm-generic/current.h> diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h index d8f9872b0e2..f0a4c256403 100644 --- a/arch/blackfin/include/asm/device.h +++ b/arch/blackfin/include/asm/device.h @@ -1,7 +1 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ #include <asm-generic/device.h> - diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index d7d9148e433..ed6b1f3cccc 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -95,4 +95,17 @@ static inline void dma_sync_single_for_device(struct device *dev, enum dma_data_direction dir) { } + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ +} + #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 230e1605d3f..5a87baf0659 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -20,7 +20,7 @@ typedef unsigned long elf_greg_t; -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_bfinfp_struct elf_fpregset_t; diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h index 27f6c785d10..3711bd9d50b 100644 --- a/arch/blackfin/include/asm/emergency-restart.h +++ b/arch/blackfin/include/asm/emergency-restart.h @@ -1,6 +1 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - #include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h index 164e4f39bb5..4c82b503d92 100644 --- a/arch/blackfin/include/asm/errno.h +++ b/arch/blackfin/include/asm/errno.h @@ -1,6 +1 @@ -#ifndef _BFIN_ERRNO_H -#define _BFIN_ERRNO_H - -#include<asm-generic/errno.h> - -#endif /* _BFIN_ERRNO_H */ +#include <asm-generic/errno.h> diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h index c7df3803099..3a4988e8df4 100644 --- a/arch/blackfin/include/asm/fb.h +++ b/arch/blackfin/include/asm/fb.h @@ -1,12 +1 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ +#include <asm-generic/fb.h> diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h index 6a332a9f099..0b745828f42 100644 --- a/arch/blackfin/include/asm/futex.h +++ b/arch/blackfin/include/asm/futex.h @@ -1,6 +1 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - #include <asm-generic/futex.h> - -#endif diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index 717181a1749..0b78b873df5 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -1,47 +1,14 @@ #ifndef __BFIN_HARDIRQ_H #define __BFIN_HARDIRQ_H -#include <linux/cache.h> -#include <linux/threads.h> -#include <asm/irq.h> - -typedef struct { - unsigned int __softirq_pending; - unsigned int __syscall_count; - struct task_struct *__ksoftirqd_task; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -/* - * We put the hardirq and softirq counter into the preemption - * counter. The bitmask has the following meaning: - * - * - bits 0-7 are the preemption count (max preemption depth: 256) - * - bits 8-15 are the softirq count (max # of softirqs: 256) - * - bits 16-23 are the hardirq count (max # of hardirqs: 256) - * - * - ( bit 26 is the PREEMPT_ACTIVE flag. ) - * - * PREEMPT_MASK: 0x000000ff - * HARDIRQ_MASK: 0x0000ff00 - * SOFTIRQ_MASK: 0x00ff0000 - */ - -#if NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -#ifdef NR_IRQS -# if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -# endif -#endif - #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 extern void ack_bad_irq(unsigned int irq); +#define ack_bad_irq ack_bad_irq + +/* Define until common code gets sane defaults */ +#define HARDIRQ_BITS 9 + +#include <asm-generic/hardirq.h> #endif diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h index 5b51eaec012..1f5ef7da004 100644 --- a/arch/blackfin/include/asm/hw_irq.h +++ b/arch/blackfin/include/asm/hw_irq.h @@ -1,6 +1 @@ -#ifndef __ASM_BFIN_HW_IRQ_H -#define __ASM_BFIN_HW_IRQ_H - -/* Dummy include. */ - -#endif +#include <asm-generic/hw_irq.h> diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 3022b5c96b3..37053eca200 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -222,7 +222,6 @@ extern void blkfin_inv_cache_all(void); #define ioport_unmap(addr) /* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) #define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) #define phys_to_virt(vaddr) ((void *) (vaddr)) diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h index 895e3173165..eca8d75b0a8 100644 --- a/arch/blackfin/include/asm/ioctls.h +++ b/arch/blackfin/include/asm/ioctls.h @@ -1,87 +1,7 @@ #ifndef __ARCH_BFIN_IOCTLS_H__ #define __ARCH_BFIN_IOCTLS_H__ -#include <asm/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -/* Get Pty Number (of pty-mux device) */ -#define TIOCGPTN _IOR('T', 0x30, unsigned int) -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - #define FIOQSIZE 0x545E +#include <asm-generic/ioctls.h> -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ARCH_BFIN_IOCTLS_H__ */ +#endif diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h index 8f0899cdf4d..84c7e51cb6d 100644 --- a/arch/blackfin/include/asm/ipcbuf.h +++ b/arch/blackfin/include/asm/ipcbuf.h @@ -1,30 +1 @@ -/* Changes origined from m68k version. Lineo Inc. May 2001 */ - -#ifndef __BFIN_IPCBUF_H__ -#define __BFIN_IPCBUF_H__ - -/* - * The user_ipc_perm structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm { - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __BFIN_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index bbe1c3726b6..87ba9ad399c 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.10-00" +#define IPIPE_ARCH_STRING "1.11-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 10 +#define IPIPE_MINOR_NUMBER 11 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -207,7 +207,7 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#ifdef CONFIG_GENERIC_CLOCKEVENTS +#ifdef CONFIG_TICKSOURCE_CORETMR #define IRQ_SYSTMR IRQ_CORETMR #define IRQ_PRIOTMR IRQ_CORETMR #else @@ -240,8 +240,13 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #define ipipe_init_irq_threads() do { } while (0) #define ipipe_start_irq_thread(irq, desc) 0 +#ifndef CONFIG_TICKSOURCE_GPTMR0 #define IRQ_SYSTMR IRQ_CORETMR #define IRQ_PRIOTMR IRQ_CORETMR +#else +#define IRQ_SYSTMR IRQ_TIMER0 +#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 +#endif #define __ipipe_root_tick_p(regs) 1 diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index 3e8acbd1a3b..490098f532a 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -51,23 +51,23 @@ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ -static inline void __ipipe_stall_root(void) -{ - volatile unsigned long *p = &__ipipe_root_status; - set_bit(0, p); -} +#define __ipipe_stall_root() \ + do { \ + volatile unsigned long *p = &__ipipe_root_status; \ + set_bit(0, p); \ + } while (0) -static inline unsigned long __ipipe_test_and_stall_root(void) -{ - volatile unsigned long *p = &__ipipe_root_status; - return test_and_set_bit(0, p); -} +#define __ipipe_test_and_stall_root() \ + ({ \ + volatile unsigned long *p = &__ipipe_root_status; \ + test_and_set_bit(0, p); \ + }) -static inline unsigned long __ipipe_test_root(void) -{ - const unsigned long *p = &__ipipe_root_status; - return test_bit(0, p); -} +#define __ipipe_test_root() \ + ({ \ + const unsigned long *p = &__ipipe_root_status; \ + test_bit(0, p); \ + }) #endif /* !__ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 400bdd52ce8..42a15f5ce0d 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -22,13 +22,6 @@ /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ #include <mach/irq.h> -/* Xenomai IPIPE helpers */ -#define local_irq_restore_hw(x) local_irq_restore(x) -#define local_irq_save_hw(x) local_irq_save(x) -#define local_irq_enable_hw(x) local_irq_enable(x) -#define local_irq_disable_hw(x) local_irq_disable(x) -#define irqs_disabled_hw(x) irqs_disabled(x) - #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else @@ -45,9 +38,6 @@ : "d" (bfin_irq_flags) \ ) -static inline int irq_canonicalize(int irq) -{ - return irq; -} +#include <asm-generic/irq.h> #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 139cba4651b..9b19a19d9ae 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -31,6 +31,150 @@ static inline unsigned long bfin_cli(void) return flags; } +#ifdef CONFIG_IPIPE + +#include <linux/ipipe_base.h> +#include <linux/ipipe_trace.h> + +#ifdef CONFIG_DEBUG_HWERR +# define bfin_no_irqs 0x3f +#else +# define bfin_no_irqs 0x1f +#endif + +#define raw_local_irq_disable() \ + do { \ + ipipe_check_context(ipipe_root_domain); \ + __ipipe_stall_root(); \ + barrier(); \ + } while (0) + +static inline void raw_local_irq_enable(void) +{ + barrier(); + ipipe_check_context(ipipe_root_domain); + __ipipe_unstall_root(); +} + +#define raw_local_save_flags_ptr(x) \ + do { \ + *(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \ + } while (0) + +#define raw_local_save_flags(x) raw_local_save_flags_ptr(&(x)) + +#define raw_irqs_disabled_flags(x) ((x) == bfin_no_irqs) + +#define raw_local_irq_save_ptr(x) \ + do { \ + *(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \ + barrier(); \ + } while (0) + +#define raw_local_irq_save(x) \ + do { \ + ipipe_check_context(ipipe_root_domain); \ + raw_local_irq_save_ptr(&(x)); \ + } while (0) + +static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) +{ + /* + * Merge virtual and real interrupt mask bits into a single + * 32bit word. + */ + return (real & ~(1 << 31)) | ((virt != 0) << 31); +} + +static inline int raw_demangle_irq_bits(unsigned long *x) +{ + int virt = (*x & (1 << 31)) != 0; + *x &= ~(1L << 31); + return virt; +} + +static inline void local_irq_disable_hw_notrace(void) +{ + bfin_cli(); +} + +static inline void local_irq_enable_hw_notrace(void) +{ + bfin_sti(bfin_irq_flags); +} + +#define local_save_flags_hw(flags) \ + do { \ + (flags) = bfin_read_IMASK(); \ + } while (0) + +#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0) + +#define irqs_disabled_hw() \ + ({ \ + unsigned long flags; \ + local_save_flags_hw(flags); \ + irqs_disabled_flags_hw(flags); \ + }) + +static inline void local_irq_save_ptr_hw(unsigned long *flags) +{ + *flags = bfin_cli(); +#ifdef CONFIG_DEBUG_HWERR + bfin_sti(0x3f); +#endif +} + +#define local_irq_save_hw_notrace(flags) \ + do { \ + local_irq_save_ptr_hw(&(flags)); \ + } while (0) + +static inline void local_irq_restore_hw_notrace(unsigned long flags) +{ + if (!irqs_disabled_flags_hw(flags)) + local_irq_enable_hw_notrace(); +} + +#ifdef CONFIG_IPIPE_TRACE_IRQSOFF +# define local_irq_disable_hw() \ + do { \ + if (!irqs_disabled_hw()) { \ + local_irq_disable_hw_notrace(); \ + ipipe_trace_begin(0x80000000); \ + } \ + } while (0) +# define local_irq_enable_hw() \ + do { \ + if (irqs_disabled_hw()) { \ + ipipe_trace_end(0x80000000); \ + local_irq_enable_hw_notrace(); \ + } \ + } while (0) +# define local_irq_save_hw(flags) \ + do { \ + local_save_flags_hw(flags); \ + if (!irqs_disabled_flags_hw(flags)) { \ + local_irq_disable_hw_notrace(); \ + ipipe_trace_begin(0x80000001); \ + } \ + } while (0) +# define local_irq_restore_hw(flags) \ + do { \ + if (!irqs_disabled_flags_hw(flags)) { \ + ipipe_trace_end(0x80000001); \ + local_irq_enable_hw_notrace(); \ + } \ + } while (0) +#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */ +# define local_irq_disable_hw() local_irq_disable_hw_notrace() +# define local_irq_enable_hw() local_irq_enable_hw_notrace() +# define local_irq_save_hw(flags) local_irq_save_hw_notrace(flags) +# define local_irq_restore_hw(flags) local_irq_restore_hw_notrace(flags) +#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */ + +#else /* CONFIG_IPIPE */ + static inline void raw_local_irq_disable(void) { bfin_cli(); @@ -44,12 +188,6 @@ static inline void raw_local_irq_enable(void) #define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0) -static inline void raw_local_irq_restore(unsigned long flags) -{ - if (!raw_irqs_disabled_flags(flags)) - raw_local_irq_enable(); -} - static inline unsigned long __raw_local_irq_save(void) { unsigned long flags = bfin_cli(); @@ -60,4 +198,18 @@ static inline unsigned long __raw_local_irq_save(void) } #define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0) +#define local_irq_save_hw(flags) raw_local_irq_save(flags) +#define local_irq_restore_hw(flags) raw_local_irq_restore(flags) +#define local_irq_enable_hw() raw_local_irq_enable() +#define local_irq_disable_hw() raw_local_irq_disable() +#define irqs_disabled_hw() irqs_disabled() + +#endif /* !CONFIG_IPIPE */ + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if (!raw_irqs_disabled_flags(flags)) + raw_local_irq_enable(); +} + #endif diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h index 0a88622339e..3575c64af42 100644 --- a/arch/blackfin/include/asm/kmap_types.h +++ b/arch/blackfin/include/asm/kmap_types.h @@ -1,6 +1 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - #include <asm-generic/kmap_types.h> - -#endif diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h index 75afffbc642..c11c530f74d 100644 --- a/arch/blackfin/include/asm/local.h +++ b/arch/blackfin/include/asm/local.h @@ -1,6 +1 @@ -#ifndef __BLACKFIN_LOCAL_H -#define __BLACKFIN_LOCAL_H - #include <asm-generic/local.h> - -#endif /* __BLACKFIN_LOCAL_H */ diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 61f7487fbf1..4179e329b9c 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -59,7 +59,7 @@ #define SDRAM_tRP TRP_1 #define SDRAM_tRP_num 1 #define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 +#define SDRAM_tRAS_num 4 #define SDRAM_tRCD TRCD_1 #define SDRAM_tWR TWR_2 #endif @@ -89,6 +89,85 @@ #endif #endif +/* + * The BF526-EZ-Board changed SDRAM chips between revisions, + * so we use below timings to accommodate both. + */ +#if defined(CONFIG_MEM_MT48H32M16LFCJ_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_8 +#define SDRAM_tRAS_num 8 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + #if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \ defined(CONFIG_MEM_MT48LC8M32B2B5_7) /*SDRAM INFORMATION: */ @@ -109,6 +188,13 @@ #define SDRAM_CL CL_3 #endif +#if defined(CONFIG_MEM_MT48H32M16LFCJ_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_2 +#endif + #ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC /* Equation from section 17 (p17-46) of BF533 HRM */ diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h index e92b31051bb..5e21627c9ba 100644 --- a/arch/blackfin/include/asm/mem_map.h +++ b/arch/blackfin/include/asm/mem_map.h @@ -1,87 +1,84 @@ /* - * mem_map.h - * Common header file for blackfin family of processors. + * Common Blackfin memory map * + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_H_ -#define _MEM_MAP_H_ +#ifndef __BFIN_MEM_MAP_H__ +#define __BFIN_MEM_MAP_H__ #include <mach/mem_map.h> -#ifndef __ASSEMBLY__ +/* Every Blackfin so far has MMRs like this */ +#ifndef COREMMR_BASE +# define COREMMR_BASE 0xFFE00000 +#endif +#ifndef SYSMMR_BASE +# define SYSMMR_BASE 0xFFC00000 +#endif -#ifdef CONFIG_SMP -static inline ulong get_l1_scratch_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START; -} -static inline ulong get_l1_code_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START; -} -static inline ulong get_l1_data_a_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START; -} -static inline ulong get_l1_data_b_start_cpu(int cpu) -{ - return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START; -} +/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */ +#ifndef L1_SCRATCH_START +# define L1_SCRATCH_START 0xFFB00000 +# define L1_SCRATCH_LENGTH 0x1000 +#endif -static inline ulong get_l1_scratch_start(void) -{ - return get_l1_scratch_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_code_start(void) -{ - return get_l1_code_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_data_a_start(void) -{ - return get_l1_data_a_start_cpu(blackfin_core_id()); -} -static inline ulong get_l1_data_b_start(void) -{ - return get_l1_data_b_start_cpu(blackfin_core_id()); -} +/* Most parts lack on-chip L2 SRAM */ +#ifndef L2_START +# define L2_START 0 +# define L2_LENGTH 0 +#endif + +/* Most parts lack on-chip L1 ROM */ +#ifndef L1_ROM_START +# define L1_ROM_START 0 +# define L1_ROM_LENGTH 0 +#endif + +/* Allow wonky SMP ports to override this */ +#ifndef GET_PDA_SAFE +# define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; +# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) -#else /* !CONFIG_SMP */ +# ifndef __ASSEMBLY__ -static inline ulong get_l1_scratch_start_cpu(int cpu) +static inline unsigned long get_l1_scratch_start_cpu(int cpu) { return L1_SCRATCH_START; } -static inline ulong get_l1_code_start_cpu(int cpu) +static inline unsigned long get_l1_code_start_cpu(int cpu) { return L1_CODE_START; } -static inline ulong get_l1_data_a_start_cpu(int cpu) +static inline unsigned long get_l1_data_a_start_cpu(int cpu) { return L1_DATA_A_START; } -static inline ulong get_l1_data_b_start_cpu(int cpu) +static inline unsigned long get_l1_data_b_start_cpu(int cpu) { return L1_DATA_B_START; } -static inline ulong get_l1_scratch_start(void) +static inline unsigned long get_l1_scratch_start(void) { return get_l1_scratch_start_cpu(0); } -static inline ulong get_l1_code_start(void) +static inline unsigned long get_l1_code_start(void) { return get_l1_code_start_cpu(0); } -static inline ulong get_l1_data_a_start(void) +static inline unsigned long get_l1_data_a_start(void) { return get_l1_data_a_start_cpu(0); } -static inline ulong get_l1_data_b_start(void) +static inline unsigned long get_l1_data_b_start(void) { return get_l1_data_b_start_cpu(0); } -#endif /* CONFIG_SMP */ -#endif /* __ASSEMBLY__ */ +# endif /* __ASSEMBLY__ */ +#endif /* !GET_PDA_SAFE */ -#endif /* _MEM_MAP_H_ */ +#endif diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h index b58f5ad3f02..8eebf89f5ab 100644 --- a/arch/blackfin/include/asm/mman.h +++ b/arch/blackfin/include/asm/mman.h @@ -1,43 +1 @@ -#ifndef __BFIN_MMAN_H__ -#define __BFIN_MMAN_H__ - -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ -#define PROT_SEM 0x8 /* page may be used for atomic ops */ -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_TYPE 0x0f /* Mask for type of mapping */ -#define MAP_FIXED 0x10 /* Interpret addr exactly */ -#define MAP_ANONYMOUS 0x20 /* don't use a file */ - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MS_ASYNC 1 /* sync memory asynchronously */ -#define MS_INVALIDATE 2 /* invalidate the caches */ -#define MS_SYNC 4 /* synchronous memory sync */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0x0 /* default page-in behavior */ -#define MADV_RANDOM 0x1 /* page-in minimum required */ -#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ -#define MADV_WILLNEED 0x3 /* pre-fault pages */ -#define MADV_DONTNEED 0x4 /* discard these pages */ - -/* compatibility flags */ -#define MAP_ANON MAP_ANONYMOUS -#define MAP_FILE 0 - -#endif /* __BFIN_MMAN_H__ */ +#include <asm-generic/mman.h> diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h index 6fcbe8cd801..809134c644a 100644 --- a/arch/blackfin/include/asm/msgbuf.h +++ b/arch/blackfin/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef _BFIN_MSGBUF_H -#define _BFIN_MSGBUF_H - -/* - * The msqid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _BFIN_MSGBUF_H */ +#include <asm-generic/msgbuf.h> diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h index 5d399256bf0..5cc641c5083 100644 --- a/arch/blackfin/include/asm/mutex.h +++ b/arch/blackfin/include/asm/mutex.h @@ -10,7 +10,7 @@ #define _ASM_MUTEX_H #ifndef CONFIG_SMP -#include <asm-generic/mutex-dec.h> +#include <asm-generic/mutex.h> #else static inline void diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 3ea2016a1d4..29dcf75c611 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -1,88 +1,7 @@ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H -/* PAGE_SHIFT determines the page size */ +#include <asm-generic/page.h> +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) -#define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) #endif -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include <asm/setup.h> - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr,pg) clear_page(page) -#define copy_user_page(to, from, vaddr,pg) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { - unsigned long pte; -} pte_t; -typedef struct { - unsigned long pmd[16]; -} pmd_t; -typedef struct { - unsigned long pgd; -} pgd_t; -typedef struct { - unsigned long pgprot; -} pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> -#include <asm/io.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) - -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) -#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ - ((void *)(kaddr) < (void *)memory_end)) - -#include <asm-generic/getorder.h> - -#endif /* __ASSEMBLY__ */ - -#endif /* _BLACKFIN_PAGE_H */ diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h index 41564a6347f..965d4542797 100644 --- a/arch/blackfin/include/asm/param.h +++ b/arch/blackfin/include/asm/param.h @@ -1,22 +1 @@ -#ifndef _BLACKFIN_PARAM_H -#define _BLACKFIN_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ -#define USER_HZ 100 -#define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _BLACKFIN_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h index c94c7bc88c7..06a959d6723 100644 --- a/arch/blackfin/include/asm/percpu.h +++ b/arch/blackfin/include/asm/percpu.h @@ -1,6 +1 @@ -#ifndef __ARCH_BLACKFIN_PERCPU__ -#define __ARCH_BLACKFIN_PERCPU__ - #include <asm-generic/percpu.h> - -#endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h index c686e0542fd..f261cb7dda0 100644 --- a/arch/blackfin/include/asm/pgalloc.h +++ b/arch/blackfin/include/asm/pgalloc.h @@ -1,8 +1 @@ -#ifndef _BLACKFIN_PGALLOC_H -#define _BLACKFIN_PGALLOC_H - -#include <asm/setup.h> - -#define check_pgt_cache() do { } while (0) - -#endif /* _BLACKFIN_PGALLOC_H */ +#include <asm-generic/pgalloc.h> diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h index 94cc2636e0e..a0556671357 100644 --- a/arch/blackfin/include/asm/poll.h +++ b/arch/blackfin/include/asm/poll.h @@ -1,24 +1,9 @@ #ifndef __BFIN_POLL_H #define __BFIN_POLL_H -#define POLLIN 1 -#define POLLPRI 2 -#define POLLOUT 4 -#define POLLERR 8 -#define POLLHUP 16 -#define POLLNVAL 32 -#define POLLRDNORM 64 -#define POLLWRNORM POLLOUT -#define POLLRDBAND 128 +#define POLLWRNORM 4 /* POLLOUT */ #define POLLWRBAND 256 -#define POLLMSG 0x0400 -#define POLLREMOVE 0x1000 -#define POLLRDHUP 0x2000 -struct pollfd { - int fd; - short events; - short revents; -}; +#include <asm-generic/poll.h> -#endif /* __BFIN_POLL_H */ +#endif diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h index 23aa1f8c1bd..80c9d64eb26 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/asm/posix_types.h @@ -1,61 +1,27 @@ #ifndef __ARCH_BFIN_POSIX_TYPES_H #define __ARCH_BFIN_POSIX_TYPES_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t + typedef unsigned int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + typedef unsigned long __kernel_size_t; typedef long __kernel_ssize_t; typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char *__kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; +#define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_uid_t; typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif +#define __kernel_old_uid_t __kernel_old_uid_t -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#endif /* defined(__KERNEL__) */ +#include <asm-generic/posix_types.h> #endif diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 3040415523b..a36ad8dac06 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -7,9 +7,8 @@ */ #define current_text_addr() ({ __label__ _l; _l: &&_l;}) +#include <asm/ptrace.h> #include <asm/blackfin.h> -#include <asm/segment.h> -#include <linux/compiler.h> static inline unsigned long rdusp(void) { @@ -59,36 +58,8 @@ struct thread_struct { PS_S, 0, 0 \ } -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#ifndef CONFIG_SMP -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); \ - (_regs)->pc = (_pc); \ - if (current->mm) \ - (_regs)->p5 = current->mm->start_data; \ - task_thread_info(current)->l1_task_info.stack_start \ - = (void *)current->mm->context.stack_start; \ - task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \ - memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \ - sizeof(*L1_SCRATCH_TASK_INFO)); \ - wrusp(_usp); \ -} while(0) -#else -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); \ - (_regs)->pc = (_pc); \ - if (current->mm) \ - (_regs)->p5 = current->mm->start_data; \ - wrusp(_usp); \ -} while (0) -#endif +extern void start_thread(struct pt_regs *regs, unsigned long new_ip, + unsigned long new_sp); /* Forward declaration, a strange C thing */ struct task_struct; @@ -134,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void) /* Always use CHIPID, to work around ANOMALY_05000234 */ uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28; -#ifdef CONFIG_BF52x - /* ANOMALY_05000357 +#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI + /* + * ANOMALY_05000364 * Incorrect Revision Number in DSPID Register */ - if (revid == 0) - switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) { - case 0x0010: - revid = 0; - break; - case 0x2796: - revid = 1; - break; - default: - revid = 0xFFFF; - break; - } + if (ANOMALY_05000364 && + bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796) + revid = 1; #endif + return revid; } diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h index 091355ab349..04bc4db8921 100644 --- a/arch/blackfin/include/asm/resource.h +++ b/arch/blackfin/include/asm/resource.h @@ -1,6 +1 @@ -#ifndef _BFIN_RESOURCE_H -#define _BFIN_RESOURCE_H - #include <asm-generic/resource.h> - -#endif /* _BFIN_RESOURCE_H */ diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h index 18deb5c7fa5..7673b83cfef 100644 --- a/arch/blackfin/include/asm/sembuf.h +++ b/arch/blackfin/include/asm/sembuf.h @@ -1,25 +1 @@ -#ifndef _BFIN_SEMBUF_H -#define _BFIN_SEMBUF_H - -/* - * The semid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _BFIN_SEMBUF_H */ +#include <asm-generic/sembuf.h> diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h index 3a47606c858..94a4a12e3bf 100644 --- a/arch/blackfin/include/asm/serial.h +++ b/arch/blackfin/include/asm/serial.h @@ -1,6 +1,2 @@ -/* - * include/asm-blackfin/serial.h - */ - +#include <asm-generic/serial.h> #define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH -#define BASE_BAUD (1843200 / 16) diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h index 01c8c6cbe6f..552df83f1a4 100644 --- a/arch/blackfin/include/asm/setup.h +++ b/arch/blackfin/include/asm/setup.h @@ -1,17 +1 @@ -/* -** asm/setup.h -- Definition of the Linux/bfin setup information -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Copyright Lineo, Inc 2001 Tony Kou -** -*/ - -#ifndef _BFIN_SETUP_H -#define _BFIN_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#endif /* _BFIN_SETUP_H */ +#include <asm-generic/setup.h> diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h index 612436303e8..83c05fc2de3 100644 --- a/arch/blackfin/include/asm/shmbuf.h +++ b/arch/blackfin/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef _BFIN_SHMBUF_H -#define _BFIN_SHMBUF_H - -/* - * The shmid64_ds structure for bfin architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _BFIN_SHMBUF_H */ +#include <asm-generic/shmbuf.h> diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h index 3c03906b766..93f30deb95d 100644 --- a/arch/blackfin/include/asm/shmparam.h +++ b/arch/blackfin/include/asm/shmparam.h @@ -1,6 +1 @@ -#ifndef _BFIN_SHMPARAM_H -#define _BFIN_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _BFIN_SHMPARAM_H */ +#include <asm-generic/shmparam.h> diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h index 2eea9079445..77a3bf37b69 100644 --- a/arch/blackfin/include/asm/signal.h +++ b/arch/blackfin/include/asm/signal.h @@ -1,160 +1,7 @@ #ifndef _BLACKFIN_SIGNAL_H #define _BLACKFIN_SIGNAL_H -#include <linux/types.h> +#define SA_RESTORER 0x04000000 +#include <asm-generic/signal.h> -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal-defs.h> - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer) (void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer) (void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction) (int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer) (void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include <asm/sigcontext.h> -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _BLACKFIN_SIGNAL_H */ +#endif diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h index fac7fe9e1f8..6b71384b9d8 100644 --- a/arch/blackfin/include/asm/socket.h +++ b/arch/blackfin/include/asm/socket.h @@ -1,59 +1 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_SOCKET_H */ +#include <asm-generic/socket.h> diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h index 426b89bfaa8..def6d4746ee 100644 --- a/arch/blackfin/include/asm/sockios.h +++ b/arch/blackfin/include/asm/sockios.h @@ -1,13 +1 @@ -#ifndef __ARCH_BFIN_SOCKIOS__ -#define __ARCH_BFIN_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_BFIN_SOCKIOS__ */ +#include <asm-generic/sockios.h> diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index 0249ac31947..d6ff4b59fcb 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -1,6 +1,10 @@ #ifndef __BFIN_SPINLOCK_H #define __BFIN_SPINLOCK_H +#ifndef CONFIG_SMP +# include <asm-generic/spinlock.h> +#else + #include <asm/atomic.h> asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr); @@ -86,4 +90,6 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) #define _raw_read_relax(lock) cpu_relax() #define _raw_write_relax(lock) cpu_relax() +#endif + #endif /* !__BFIN_SPINLOCK_H */ diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h index 350672091ba..0b91fe198c2 100644 --- a/arch/blackfin/include/asm/statfs.h +++ b/arch/blackfin/include/asm/statfs.h @@ -1,6 +1 @@ -#ifndef _BFIN_STATFS_H -#define _BFIN_STATFS_H - #include <asm-generic/statfs.h> - -#endif /* _BFIN_STATFS_H */ diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h index 6403ad2932e..d442113de51 100644 --- a/arch/blackfin/include/asm/swab.h +++ b/arch/blackfin/include/asm/swab.h @@ -2,11 +2,7 @@ #define _BLACKFIN_SWAB_H #include <linux/types.h> -#include <linux/compiler.h> - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif +#include <asm-generic/swab.h> #ifdef __GNUC__ diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 294dbda2416..85e8f16cf8c 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -135,11 +135,13 @@ struct __xchg_dummy { }; #define __xg(x) ((volatile struct __xchg_dummy *)(x)) +#include <mach/blackfin.h> + static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) { unsigned long tmp = 0; - unsigned long flags = 0; + unsigned long flags; local_irq_save_hw(flags); diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h index f37feb7cf89..3935b106de7 100644 --- a/arch/blackfin/include/asm/termbits.h +++ b/arch/blackfin/include/asm/termbits.h @@ -1,198 +1 @@ -#ifndef __ARCH_BFIN_TERMBITS_H__ -#define __ARCH_BFIN_TERMBITS_H__ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_BFIN_TERMBITS_H__ */ +#include <asm-generic/termbits.h> diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h index d50d063c605..280d78a9d96 100644 --- a/arch/blackfin/include/asm/termios.h +++ b/arch/blackfin/include/asm/termios.h @@ -1,94 +1 @@ -#ifndef __BFIN_TERMIOS_H__ -#define __BFIN_TERMIOS_H__ - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __BFIN_TERMIOS_H__ */ +#include <asm-generic/termios.h> diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 2920087516f..2bbfdd950af 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -77,7 +77,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h index 277b400924b..f1a06c006ed 100644 --- a/arch/blackfin/include/asm/tlbflush.h +++ b/arch/blackfin/include/asm/tlbflush.h @@ -1,56 +1 @@ -#ifndef _BLACKFIN_TLBFLUSH_H -#define _BLACKFIN_TLBFLUSH_H - -/* - * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> - * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> - */ - -#include <asm/setup.h> - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG(); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG(); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr) -{ - BUG(); -} - -static inline void flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - BUG(); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG(); -} - -#endif +#include <asm-generic/tlbflush.h> diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h index acee2398789..5428f333a02 100644 --- a/arch/blackfin/include/asm/topology.h +++ b/arch/blackfin/include/asm/topology.h @@ -1,6 +1 @@ -#ifndef _ASM_BLACKFIN_TOPOLOGY_H -#define _ASM_BLACKFIN_TOPOLOGY_H - #include <asm-generic/topology.h> - -#endif /* _ASM_BLACKFIN_TOPOLOGY_H */ diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 34f7295fb07..3cdc454cde2 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -111,9 +111,7 @@ level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" #define EXC_0x2A(level) \ "Instruction fetch misaligned address violation\n" \ - level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \ - level " exception, the return address provided in RETX is the destination address which is\n" \ - level " misaligned, rather than the address of the offending instruction.\n" + level " - Attempted misaligned instruction cache fetch.\n" #define EXC_0x2B(level) \ "CPLB protection violation\n" \ level " - Illegal instruction fetch access (memory protection violation).\n" diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h index 8441cbc2bf9..b9e79bc580d 100644 --- a/arch/blackfin/include/asm/types.h +++ b/arch/blackfin/include/asm/types.h @@ -1,36 +1 @@ -#ifndef _BFIN_TYPES_H -#define _BFIN_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include <asm-generic/int-ll64.h> - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u64 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _BFIN_TYPES_H */ +#include <asm-generic/types.h> diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 8894e9ffbb5..2f469a1f80f 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -265,4 +265,26 @@ __clear_user(void *to, unsigned long n) #define clear_user(to, n) __clear_user(to, n) +/* How to interpret these return values: + * CORE: can be accessed by core load or dma memcpy + * CORE_ONLY: can only be accessed by core load + * DMA: can only be accessed by dma memcpy + * IDMA: can only be accessed by interprocessor dma memcpy (BF561) + * ITEST: can be accessed by isram memcpy or dma memcpy + */ +enum { + BFIN_MEM_ACCESS_CORE = 0, + BFIN_MEM_ACCESS_CORE_ONLY, + BFIN_MEM_ACCESS_DMA, + BFIN_MEM_ACCESS_IDMA, + BFIN_MEM_ACCESS_ITEST, +}; +/** + * bfin_mem_access_type() - what kind of memory access is required + * @addr: the address to check + * @size: number of bytes needed + * @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above) + */ +int bfin_mem_access_type(unsigned long addr, unsigned long size); + #endif /* _BLACKFIN_UACCESS_H */ diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h index 4a4e3856beb..9bc07b9f30f 100644 --- a/arch/blackfin/include/asm/ucontext.h +++ b/arch/blackfin/include/asm/ucontext.h @@ -1,17 +1 @@ -/** Changes made by Tony Kou Lineo Inc. May 2001 - * - * Based on: include/m68knommu/ucontext.h - */ - -#ifndef _BLACKFIN_UCONTEXT_H -#define _BLACKFIN_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; /* the others are necessary */ - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _BLACKFIN_UCONTEXT_H */ +#include <asm-generic/ucontext.h> diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h index fd8a1d63494..6cecbbb2111 100644 --- a/arch/blackfin/include/asm/unaligned.h +++ b/arch/blackfin/include/asm/unaligned.h @@ -1,11 +1 @@ -#ifndef _ASM_BLACKFIN_UNALIGNED_H -#define _ASM_BLACKFIN_UNALIGNED_H - -#include <linux/unaligned/le_struct.h> -#include <linux/unaligned/be_byteshift.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_BLACKFIN_UNALIGNED_H */ +#include <asm-generic/unaligned.h> diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index da35133c171..c8e7ee4768c 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -381,8 +381,9 @@ #define __NR_preadv 366 #define __NR_pwritev 367 #define __NR_rt_tgsigqueueinfo 368 +#define __NR_perf_counter_open 369 -#define __NR_syscall 369 +#define __NR_syscall 370 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h index afe6a0e1f7c..4792a60831e 100644 --- a/arch/blackfin/include/asm/user.h +++ b/arch/blackfin/include/asm/user.h @@ -1,89 +1 @@ -#ifndef _BFIN_USER_H -#define _BFIN_USER_H - -/* Changes by Tony Kou Lineo, Inc. July, 2001 - * - * Based include/asm-m68knommu/user.h - * - */ - -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ -struct user_bfinfp_struct { -}; - -/* This is the old layout of "struct pt_regs" as of Linux 1.x, and - is still the layout used by user (the new pt_regs doesn't have - all registers). */ -struct user_regs_struct { - long r0, r1, r2, r3, r4, r5, r6, r7; - long p0, p1, p2, p3, p4, p5, usp, fp; - long i0, i1, i2, i3; - long l0, l1, l2, l3; - long b0, b1, b2, b3; - long m0, m1, m2, m3; - long a0w, a1w; - long a0x, a1x; - unsigned long rets; - unsigned long astat; - unsigned long pc; - unsigned long orig_p0; -}; - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ - -struct user { -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - - struct user_regs_struct regs; /* Where the registers are actually stored */ - -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; - /* Used by gdb to help find the values for */ - /* the registers. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif +#include <asm-generic/user.h> diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 3731088e181..141d9281e4b 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o CFLAGS_REMOVE_ftrace.o = -pg obj-$(CONFIG_IPIPE) += ipipe.o -obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index e0bf8cc0690..9f9b8281665 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) BUG_ON(src % 4); BUG_ON(size % 4); - /* Force a sync in case a previous config reset on this channel - * occurred. This is needed so subsequent writes to DMA registers - * are not spuriously lost/corrupted. - */ - __builtin_bfin_ssync(); - src_ch = 0; /* Find an avalible memDMA channel */ while (1) { - if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) { - dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; - src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; - } else { + if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) { dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; } - if (!bfin_read16(&src_ch->cfg)) { + if (!bfin_read16(&src_ch->cfg)) + break; + else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) { + bfin_write16(&src_ch->cfg, 0); break; - } else { - if (bfin_read16(&src_ch->irq_status) & DMA_DONE) - bfin_write16(&src_ch->cfg, 0); } - } + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + /* Destination */ bfin_write32(&dst_ch->start_addr, dst); bfin_write16(&dst_ch->x_count, size >> 2); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index beffa00a93c..6b944627137 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + & gpio_bank_saved[bank].dir; gpio_array[bank]->dir = gpio_bank_saved[bank].dir; gpio_array[bank]->polar = gpio_bank_saved[bank].polar; gpio_array[bank]->edge = gpio_bank_saved[bank].edge; gpio_array[bank]->both = gpio_bank_saved[bank].both; - - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; - gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index aa05e638fb7..ed8392c117e 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -10,6 +10,7 @@ #include <linux/uaccess.h> #include <asm/cacheflush.h> +#include <asm/io.h> /* Allow people to have their own Blackfin exception handler in a module */ EXPORT_SYMBOL(bfin_return_from_exception); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index c006a44527b..36193eed9a1 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -46,13 +46,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n"); -#ifdef CONFIG_BFIN_ICACHE +#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_WT +#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif @@ -91,9 +91,9 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) /* Cover L2 memory */ #if L2_LENGTH > 0 dcplb_tbl[cpu][i_d].addr = L2_START; - dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; + dcplb_tbl[cpu][i_d++].data = L2_DMEMORY; icplb_tbl[cpu][i_i].addr = L2_START; - icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; + icplb_tbl[cpu][i_i++].data = L2_IMEMORY; #endif first_mask_dcplb = i_d; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 784923e52a9..bcdfe9b0b71 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -150,15 +150,19 @@ static noinline int dcplb_miss(unsigned int cpu) nr_dcplb_miss[cpu]++; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_DCACHE +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE if (bfin_addr_dcacheable(addr)) { d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#ifdef CONFIG_BFIN_WT +# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH d_data |= CPLB_L1_AOW | CPLB_WT; -#endif +# endif } #endif - if (addr >= physical_mem_end) { + + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + d_data = L2_DMEMORY; + } else if (addr >= physical_mem_end) { if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && (status & FAULT_USERSUPV)) { addr &= ~0x3fffff; @@ -235,7 +239,7 @@ static noinline int icplb_miss(unsigned int cpu) i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_ICACHE +#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE /* * Normal RAM, and possibly the reserved memory area, are * cacheable. @@ -245,7 +249,10 @@ static noinline int icplb_miss(unsigned int cpu) i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif - if (addr >= physical_mem_end) { + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + i_data = L2_IMEMORY; + } else if (addr >= physical_mem_end) { if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & FAULT_USERSUPV)) { addr &= ~(1 * 1024 * 1024 - 1); @@ -365,13 +372,18 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) local_irq_save_hw(flags); current_rwx_mask[cpu] = masks; - d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_DCACHE - d_data |= CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_WT - d_data |= CPLB_L1_AOW | CPLB_WT; -#endif + if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { + addr = L2_START; + d_data = L2_DMEMORY; + } else { + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE + d_data |= CPLB_L1_CHBL; +# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH + d_data |= CPLB_L1_AOW | CPLB_WT; +# endif #endif + } disable_dcplb(); for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index d6c067782e6..685f160a5a3 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) } /* Cover L1 memory. One 4M area for code and data each is enough. */ - if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { - d_tbl[i_d].addr = L1_DATA_A_START; - d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + if (cpu == 0) { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; } - i_tbl[i_i].addr = L1_CODE_START; - i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; - +#ifdef CONFIG_SMP + else { + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = COREB_L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + } + i_tbl[i_i].addr = COREB_L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + } +#endif first_switched_dcplb = i_d; first_switched_icplb = i_i; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index d8cde1fc5cb..b8d22034b9a 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL(__ipipe_freq_scale); atomic_t __ipipe_irq_lvdepth[IVG15 + 1]; -unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags; +unsigned long __ipipe_irq_lvmask = bfin_no_irqs; EXPORT_SYMBOL(__ipipe_irq_lvmask); static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc) @@ -342,8 +342,3 @@ void ___ipipe_sync_pipeline(unsigned long syncmask) } EXPORT_SYMBOL(show_stack); - -#ifdef CONFIG_IPIPE_TRACE_MCOUNT -void notrace _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif /* CONFIG_IPIPE_TRACE_MCOUNT */ diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 6e31e935bb3..4b5fd36187d 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -38,38 +38,15 @@ #include <asm/pda.h> static atomic_t irq_err_count; -static spinlock_t irq_controller_lock; - -/* - * Dummy mask/unmask handler - */ -void dummy_mask_unmask_irq(unsigned int irq) -{ -} - void ack_bad_irq(unsigned int irq) { atomic_inc(&irq_err_count); printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); } -static struct irq_chip bad_chip = { - .ack = dummy_mask_unmask_irq, - .mask = dummy_mask_unmask_irq, - .unmask = dummy_mask_unmask_irq, -}; - -static int bad_stats; static struct irq_desc bad_irq_desc = { - .status = IRQ_DISABLED, - .chip = &bad_chip, .handle_irq = handle_bad_irq, - .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), - .kstat_irqs = &bad_stats, -#ifdef CONFIG_SMP - .affinity = CPU_MASK_ALL -#endif }; #ifdef CONFIG_CPUMASK_OFFSTACK @@ -77,6 +54,7 @@ static struct irq_desc bad_irq_desc = { #error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK." #endif +#ifdef CONFIG_PROC_FS int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; @@ -108,50 +86,29 @@ int show_interrupts(struct seq_file *p, void *v) } return 0; } - -/* - * do_IRQ handles all hardware IRQs. Decoded IRQs should not - * come via this function. Instead, they should provide their - * own 'handler' - */ -#ifdef CONFIG_DO_IRQ_L1 -__attribute__((l1_text)) -#endif -asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs; - struct irq_desc *desc = irq_desc + irq; -#ifndef CONFIG_IPIPE - unsigned short pending, other_ints; #endif - old_regs = set_irq_regs(regs); - /* - * Some hardware gives randomly wrong interrupts. Rather - * than crashing, do something sensible. - */ - if (irq >= NR_IRQS) - desc = &bad_irq_desc; - - irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW +static void check_stack_overflow(int irq) +{ /* Debugging check for stack overflow: is there less than STACK_WARN free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); + long sp = __get_SP() & (THREAD_SIZE - 1); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - dump_stack(); - printk(KERN_EMERG "%s: possible stack overflow while handling irq %i " - " only %ld bytes free\n", - __func__, irq, sp - sizeof(struct thread_info)); - } + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { + dump_stack(); + pr_emerg("irq%i: possible stack overflow only %ld bytes free\n", + irq, sp - sizeof(struct thread_info)); } +} +#else +static inline void check_stack_overflow(int irq) { } #endif - generic_handle_irq(irq); #ifndef CONFIG_IPIPE +static void maybe_lower_to_irq14(void) +{ + unsigned short pending, other_ints; + /* * If we're the only interrupt running (ignoring IRQ15 which * is for syscalls), lower our priority to IRQ14 so that @@ -165,7 +122,38 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) other_ints = pending & (pending - 1); if (other_ints == 0) lower_to_irq14(); -#endif /* !CONFIG_IPIPE */ +} +#else +static inline void maybe_lower_to_irq14(void) { } +#endif + +/* + * do_IRQ handles all hardware IRQs. Decoded IRQs should not + * come via this function. Instead, they should provide their + * own 'handler' + */ +#ifdef CONFIG_DO_IRQ_L1 +__attribute__((l1_text)) +#endif +asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + irq_enter(); + + check_stack_overflow(irq); + + /* + * Some hardware gives randomly wrong interrupts. Rather + * than crashing, do something sensible. + */ + if (irq >= NR_IRQS) + handle_bad_irq(irq, &bad_irq_desc); + else + generic_handle_irq(irq); + + maybe_lower_to_irq14(); + irq_exit(); set_irq_regs(old_regs); @@ -173,14 +161,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) void __init init_IRQ(void) { - struct irq_desc *desc; - int irq; - - spin_lock_init(&irq_controller_lock); - for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) { - *desc = bad_irq_desc; - } - init_arch_irq(); #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index da28f796ad7..cce79d05b90 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -34,15 +34,6 @@ int gdb_bfin_vector = -1; #error change the definition of slavecpulocks #endif -#define IN_MEM(addr, size, l1_addr, l1_size) \ -({ \ - unsigned long __addr = (unsigned long)(addr); \ - (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ -}) -#define ASYNC_BANK_SIZE \ - (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ - ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) - void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { gdb_regs[BFIN_R0] = regs->r0; @@ -463,41 +454,88 @@ static int hex(char ch) static int validate_memory_access_address(unsigned long addr, int size) { - int cpu = raw_smp_processor_id(); - - if (size < 0) + if (size < 0 || addr == 0) return -EFAULT; - if (addr >= 0x1000 && (addr + size) <= physical_mem_end) - return 0; - if (addr >= SYSMMR_BASE) - return 0; - if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) - return 0; - if (cpu == 0) { - if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) - return 0; - if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) - return 0; -#ifdef CONFIG_SMP - } else if (cpu == 1) { - if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return bfin_mem_access_type(addr, size); +} + +static int bfin_probe_kernel_read(char *dst, char *src, int size) +{ + unsigned long lsrc = (unsigned long)src; + int mem_type; + + mem_type = validate_memory_access_address(lsrc, size); + if (mem_type < 0) + return mem_type; + + if (lsrc >= SYSMMR_BASE) { + if (size == 2 && lsrc % 2 == 0) { + u16 mmr = bfin_read16(src); + memcpy(dst, &mmr, sizeof(mmr)); return 0; - if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) + } else if (size == 4 && lsrc % 4 == 0) { + u32 mmr = bfin_read32(src); + memcpy(dst, &mmr, sizeof(mmr)); return 0; - if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return probe_kernel_read(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } + } + + return -EFAULT; +} + +static int bfin_probe_kernel_write(char *dst, char *src, int size) +{ + unsigned long ldst = (unsigned long)dst; + int mem_type; + + mem_type = validate_memory_access_address(ldst, size); + if (mem_type < 0) + return mem_type; + + if (ldst >= SYSMMR_BASE) { + if (size == 2 && ldst % 2 == 0) { + u16 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write16(dst, mmr); return 0; - if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) + } else if (size == 4 && ldst % 4 == 0) { + u32 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write32(dst, mmr); return 0; -#endif + } + } else { + switch (mem_type) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + return probe_kernel_write(dst, src, size); + /* XXX: should support IDMA here with SMP */ + case BFIN_MEM_ACCESS_DMA: + if (dma_memcpy(dst, src, size)) + return 0; + break; + case BFIN_MEM_ACCESS_ITEST: + if (isram_memcpy(dst, src, size)) + return 0; + break; + } } - if (IN_MEM(addr, size, L2_START, L2_LENGTH)) - return 0; - return -EFAULT; } @@ -509,14 +547,6 @@ int kgdb_mem2hex(char *mem, char *buf, int count) { char *tmp; int err; - unsigned char *pch; - unsigned short mmr16; - unsigned long mmr32; - int cpu = raw_smp_processor_id(); - - err = validate_memory_access_address((unsigned long)mem, count); - if (err) - return err; /* * We use the upper half of buf as an intermediate buffer for the @@ -524,44 +554,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count) */ tmp = buf + count; - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (count) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = *(unsigned short *)mem; - pch = (unsigned char *)&mmr16; - *tmp++ = *pch++; - *tmp++ = *pch++; - tmp -= 2; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = *(unsigned long *)mem; - pch = (unsigned char *)&mmr32; - *tmp++ = *pch++; - *tmp++ = *pch++; - *tmp++ = *pch++; - *tmp++ = *pch++; - tmp -= 4; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM*/ - if (dma_memcpy(tmp, mem, count) == NULL) - err = -EFAULT; - } else - err = probe_kernel_read(tmp, mem, count); - + err = bfin_probe_kernel_read(tmp, mem, count); if (!err) { while (count > 0) { buf = pack_hex_byte(buf, *tmp); @@ -582,13 +575,8 @@ int kgdb_mem2hex(char *mem, char *buf, int count) */ int kgdb_ebin2mem(char *buf, char *mem, int count) { - char *tmp_old; - char *tmp_new; - unsigned short *mmr16; - unsigned long *mmr32; - int err; + char *tmp_old, *tmp_new; int size; - int cpu = raw_smp_processor_id(); tmp_old = tmp_new = buf; @@ -601,41 +589,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) tmp_old++; } - err = validate_memory_access_address((unsigned long)mem, size); - if (err) - return err; - - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (size) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = (unsigned short *)buf; - *(unsigned short *)mem = *mmr16; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = (unsigned long *)buf; - *(unsigned long *)mem = *mmr32; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(mem, buf, size) == NULL) - err = -EFAULT; - } else - err = probe_kernel_write(mem, buf, size); - - return err; + return bfin_probe_kernel_write(mem, buf, count); } /* @@ -645,16 +599,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) */ int kgdb_hex2mem(char *buf, char *mem, int count) { - char *tmp_raw; - char *tmp_hex; - unsigned short *mmr16; - unsigned long *mmr32; - int err; - int cpu = raw_smp_processor_id(); - - err = validate_memory_access_address((unsigned long)mem, count); - if (err) - return err; + char *tmp_raw, *tmp_hex; /* * We use the upper half of buf as an intermediate buffer for the @@ -669,39 +614,18 @@ int kgdb_hex2mem(char *buf, char *mem, int count) *tmp_raw |= hex(*tmp_hex--) << 4; } - if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/ - switch (count) { - case 2: - if ((unsigned int)mem % 2 == 0) { - mmr16 = (unsigned short *)tmp_raw; - *(unsigned short *)mem = *mmr16; - } else - err = -EFAULT; - break; - case 4: - if ((unsigned int)mem % 4 == 0) { - mmr32 = (unsigned long *)tmp_raw; - *(unsigned long *)mem = *mmr32; - } else - err = -EFAULT; - break; - default: - err = -EFAULT; - } - } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(mem, tmp_raw, count) == NULL) - err = -EFAULT; - } else - err = probe_kernel_write(mem, tmp_raw, count); - - return err; + return bfin_probe_kernel_write(mem, tmp_raw, count); } +#define IN_MEM(addr, size, l1_addr, l1_size) \ +({ \ + unsigned long __addr = (unsigned long)(addr); \ + (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ +}) +#define ASYNC_BANK_SIZE \ + (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ + ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) + int kgdb_validate_break_address(unsigned long addr) { int cpu = raw_smp_processor_id(); @@ -724,46 +648,17 @@ int kgdb_validate_break_address(unsigned long addr) int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) { - int err; - int cpu = raw_smp_processor_id(); - - if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) -#ifdef CONFIG_SMP - || (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) -#endif - ) { - /* access L1 instruction SRAM */ - if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE) - == NULL) - return -EFAULT; - - if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE) == NULL) - return -EFAULT; - - return 0; - } else { - err = probe_kernel_read(saved_instr, (char *)addr, - BREAK_INSTR_SIZE); - if (err) - return err; - - return probe_kernel_write((char *)addr, - arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE); - } + int err = bfin_probe_kernel_read(saved_instr, (char *)addr, + BREAK_INSTR_SIZE); + if (err) + return err; + return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE); } int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) { - if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) { - /* access L1 instruction SRAM */ - if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) - return -EFAULT; - - return 0; - } else - return probe_kernel_write((char *)addr, - (char *)bundle, BREAK_INSTR_SIZE); + return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE); } int kgdb_arch_init(void) diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S deleted file mode 100644 index edcfb3865f4..00000000000 --- a/arch/blackfin/kernel/mcount.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * linux/arch/blackfin/mcount.S - * - * Copyright (C) 2006 Analog Devices Inc. - * - * 2007/04/12 Save index, length, modify and base registers. --rpm - */ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -.text - -.align 4 /* just in case */ - -ENTRY(__mcount) - [--sp] = i0; - [--sp] = i1; - [--sp] = i2; - [--sp] = i3; - [--sp] = l0; - [--sp] = l1; - [--sp] = l2; - [--sp] = l3; - [--sp] = m0; - [--sp] = m1; - [--sp] = m2; - [--sp] = m3; - [--sp] = b0; - [--sp] = b1; - [--sp] = b2; - [--sp] = b3; - [--sp] = ( r7:0, p5:0 ); - [--sp] = ASTAT; - - p1.L = _ipipe_trace_enable; - p1.H = _ipipe_trace_enable; - r7 = [p1]; - CC = r7 == 0; - if CC jump out; - link 0x10; - r0 = 0x0; - [sp + 0xc] = r0; /* v */ - r0 = 0x0; /* type: IPIPE_TRACE_FN */ - r1 = rets; - p0 = [fp]; /* p0: Prior FP */ - r2 = [p0 + 4]; /* r2: Prior RETS */ - call ___ipipe_trace; - unlink; -out: - ASTAT = [sp++]; - ( r7:0, p5:0 ) = [sp++]; - b3 = [sp++]; - b2 = [sp++]; - b1 = [sp++]; - b0 = [sp++]; - m3 = [sp++]; - m2 = [sp++]; - m1 = [sp++]; - m0 = [sp++]; - l3 = [sp++]; - l2 = [sp++]; - l1 = [sp++]; - l0 = [sp++]; - i3 = [sp++]; - i2 = [sp++]; - i1 = [sp++]; - i0 = [sp++]; - rts; -ENDPROC(__mcount) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 30d0843ed70..9da36bab7cc 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -160,6 +160,29 @@ pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) } EXPORT_SYMBOL(kernel_thread); +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) +{ + set_fs(USER_DS); + regs->pc = new_ip; + if (current->mm) + regs->p5 = current->mm->start_data; +#ifdef CONFIG_SMP + task_thread_info(current)->l1_task_info.stack_start = + (void *)current->mm->context.stack_start; + task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp; + memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, + sizeof(*L1_SCRATCH_TASK_INFO)); +#endif + wrusp(new_sp); +} +EXPORT_SYMBOL_GPL(start_thread); + void flush_thread(void) { } @@ -321,6 +344,87 @@ void finish_atomic_sections (struct pt_regs *regs) } } +static inline +int in_mem(unsigned long addr, unsigned long size, + unsigned long start, unsigned long end) +{ + return addr >= start && addr + size <= end; +} +static inline +int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off, + unsigned long const_addr, unsigned long const_size) +{ + return const_size && + in_mem(addr, size, const_addr + off, const_addr + const_size); +} +static inline +int in_mem_const(unsigned long addr, unsigned long size, + unsigned long const_addr, unsigned long const_size) +{ + return in_mem_const_off(addr, size, 0, const_addr, const_size); +} +#define IN_ASYNC(bnum, bctlnum) \ +({ \ + (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \ + bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \ + BFIN_MEM_ACCESS_CORE; \ +}) + +int bfin_mem_access_type(unsigned long addr, unsigned long size) +{ + int cpu = raw_smp_processor_id(); + + /* Check that things do not wrap around */ + if (addr > ULONG_MAX - size) + return -EFAULT; + + if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end)) + return BFIN_MEM_ACCESS_CORE; + + if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; + if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) + return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; +#ifdef COREB_L1_CODE_START + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT; + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) + return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA; +#endif + if (in_mem_const(addr, size, L2_START, L2_LENGTH)) + return BFIN_MEM_ACCESS_CORE; + + if (addr >= SYSMMR_BASE) + return BFIN_MEM_ACCESS_CORE_ONLY; + + /* We can't read EBIU banks that aren't enabled or we end up hanging + * on the access to the async space. + */ + if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE)) + return IN_ASYNC(0, 0); + if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE)) + return IN_ASYNC(1, 0); + if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE)) + return IN_ASYNC(2, 1); + if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE)) + return IN_ASYNC(3, 1); + + if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) + return BFIN_MEM_ACCESS_CORE; + if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH)) + return BFIN_MEM_ACCESS_DMA; + + return -EFAULT; +} + #if defined(CONFIG_ACCESS_CHECK) #ifdef CONFIG_ACCESS_OK_L1 __attribute__((l1_text)) @@ -330,51 +434,61 @@ int _access_ok(unsigned long addr, unsigned long size) { if (size == 0) return 1; - if (addr > (addr + size)) + /* Check that things do not wrap around */ + if (addr > ULONG_MAX - size) return 0; if (segment_eq(get_fs(), KERNEL_DS)) return 1; #ifdef CONFIG_MTD_UCLINUX - if (addr >= memory_start && (addr + size) <= memory_end) - return 1; - if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) + if (1) +#else + if (0) +#endif + { + if (in_mem(addr, size, memory_start, memory_end)) + return 1; + if (in_mem(addr, size, memory_mtd_end, physical_mem_end)) + return 1; +# ifndef CONFIG_ROMFS_ON_MTD + if (0) +# endif + /* For XIP, allow user space to use pointers within the ROMFS. */ + if (in_mem(addr, size, memory_mtd_start, memory_mtd_end)) + return 1; + } else { + if (in_mem(addr, size, memory_start, physical_mem_end)) + return 1; + } + + if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end)) return 1; -#ifdef CONFIG_ROMFS_ON_MTD - /* For XIP, allow user space to use pointers within the ROMFS. */ - if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end) + if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH)) return 1; -#endif -#else - if (addr >= memory_start && (addr + size) <= physical_mem_end) + if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH)) return 1; -#endif - if (addr >= (unsigned long)__init_begin && - addr + size <= (unsigned long)__init_end) + if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH)) return 1; - if (addr >= get_l1_scratch_start() - && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH) + if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH)) return 1; -#if L1_CODE_LENGTH != 0 - if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1) - && addr + size <= get_l1_code_start() + L1_CODE_LENGTH) +#ifdef COREB_L1_CODE_START + if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH)) return 1; -#endif -#if L1_DATA_A_LENGTH != 0 - if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1) - && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH) + if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 1; -#endif -#if L1_DATA_B_LENGTH != 0 - if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1) - && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH) + if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH)) return 1; -#endif -#if L2_LENGTH != 0 - if (addr >= L2_START + (_ebss_l2 - _stext_l2) - && addr + size <= L2_START + L2_LENGTH) + if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH)) return 1; #endif + if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH)) + return 1; + + if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH)) + return 1; + if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH)) + return 1; + return 0; } EXPORT_SYMBOL(_access_ok); diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index d76618db50d..6a387eec6b6 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -31,7 +31,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 6454babdfaf..6225edae488 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -117,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu) */ #ifdef CONFIG_BFIN_ICACHE printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu); + printk(KERN_INFO " External memory:" +# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE + " cacheable" +# else + " uncacheable" +# endif + " in instruction cache\n"); + if (L2_LENGTH) + printk(KERN_INFO " L2 SRAM :" +# ifdef CONFIG_BFIN_L2_ICACHEABLE + " cacheable" +# else + " uncacheable" +# endif + " in instruction cache\n"); + +#else + printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu); #endif + #ifdef CONFIG_BFIN_DCACHE - printk(KERN_INFO "Data Cache Enabled for CPU%u" -# if defined CONFIG_BFIN_WB - " (write-back)" -# elif defined CONFIG_BFIN_WT - " (write-through)" + printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu); + printk(KERN_INFO " External memory:" +# if defined CONFIG_BFIN_EXTMEM_WRITEBACK + " cacheable (write-back)" +# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH + " cacheable (write-through)" +# else + " uncacheable" +# endif + " in data cache\n"); + if (L2_LENGTH) + printk(KERN_INFO " L2 SRAM :" +# if defined CONFIG_BFIN_L2_WRITEBACK + " cacheable (write-back)" +# elif defined CONFIG_BFIN_L2_WRITETHROUGH + " cacheable (write-through)" +# else + " uncacheable" # endif - "\n", cpu); + " in data cache\n"); +#else + printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu); #endif } @@ -134,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu) struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); cpudata->idle = current; - cpudata->loops_per_jiffy = loops_per_jiffy; cpudata->imemctl = bfin_read_IMEM_CONTROL(); cpudata->dmemctl = bfin_read_DMEM_CONTROL(); } @@ -374,13 +407,14 @@ static void __init print_memory_map(char *who) bfin_memmap.map[i].addr + bfin_memmap.map[i].size); switch (bfin_memmap.map[i].type) { case BFIN_MEMMAP_RAM: - printk("(usable)\n"); - break; + printk(KERN_CONT "(usable)\n"); + break; case BFIN_MEMMAP_RESERVED: - printk("(reserved)\n"); - break; - default: printk("type %lu\n", bfin_memmap.map[i].type); - break; + printk(KERN_CONT "(reserved)\n"); + break; + default: + printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type); + break; } } } @@ -443,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p) } else if (!memcmp(to, "clkin_hz=", 9)) { to += 9; early_init_clkin_hz(to); +#ifdef CONFIG_EARLY_PRINTK } else if (!memcmp(to, "earlyprintk=", 12)) { to += 12; setup_early_printk(to); +#endif } else if (!memcmp(to, "memmap=", 7)) { to += 7; parse_memmap(to); @@ -516,7 +552,7 @@ static __init void memory_setup(void) && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) mtd_size = PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); -# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -531,20 +567,26 @@ static __init void memory_setup(void) # endif /* ANOMALY_05000263 */ # endif /* CONFIG_ROMFS_FS */ - memory_end -= mtd_size; - - if (mtd_size == 0) { - console_init(); - panic("Don't boot kernel without rootfs attached."); + /* Since the default MTD_UCLINUX has no magic number, we just blindly + * read 8 past the end of the kernel's image, and look at it. + * When no image is attached, mtd_size is set to a random number + * Do some basic sanity checks before operating on things + */ + if (mtd_size == 0 || memory_end <= mtd_size) { + pr_emerg("Could not find valid ram mtd attached.\n"); + } else { + memory_end -= mtd_size; + + /* Relocate MTD image to the top of memory after the uncached memory area */ + uclinux_ram_map.phys = memory_mtd_start = memory_end; + uclinux_ram_map.size = mtd_size; + pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n", + _end, mtd_size, (void *)memory_mtd_start); + dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); } - - /* Relocate MTD image to the top of memory after the uncached memory area */ - uclinux_ram_map.phys = memory_mtd_start = memory_end; - uclinux_ram_map.size = mtd_size; - dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size); #endif /* CONFIG_MTD_UCLINUX */ -#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -578,19 +620,19 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" - KERN_INFO " fixedcode = 0x%p-0x%p\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" + " fixedcode = 0x%p-0x%p\n" + " text = 0x%p-0x%p\n" + " rodata = 0x%p-0x%p\n" + " bss = 0x%p-0x%p\n" + " data = 0x%p-0x%p\n" + " stack = 0x%p-0x%p\n" + " init = 0x%p-0x%p\n" + " available = 0x%p-0x%p\n" #ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" + " rootfs = 0x%p-0x%p\n" #endif #if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" + " DMA Zone = 0x%p-0x%p\n" #endif , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, _stext, _etext, @@ -764,6 +806,11 @@ void __init setup_arch(char **cmdline_p) { unsigned long sclk, cclk; + /* Check to make sure we are running on the right processor */ + if (unlikely(CPUID != bfin_cpuid())) + printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", + CPU, bfin_cpuid(), bfin_revid()); + #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif @@ -778,14 +825,17 @@ void __init setup_arch(char **cmdline_p) memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; - /* setup memory defaults from the user config */ - physical_mem_end = 0; - _ramend = get_mem_size() * 1024 * 1024; - memset(&bfin_memmap, 0, sizeof(bfin_memmap)); + /* If the user does not specify things on the command line, use + * what the bootloader set things up as + */ + physical_mem_end = 0; parse_cmdline_early(&command_line[0]); + if (_ramend == 0) + _ramend = get_mem_size() * 1024 * 1024; + if (physical_mem_end == 0) physical_mem_end = _ramend; @@ -815,20 +865,13 @@ void __init setup_arch(char **cmdline_p) #endif printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1) - printk("Active "); + printk(KERN_CONT "Active "); else - printk("Off "); + printk(KERN_CONT "Off "); if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); + printk(KERN_CONT "and Enabled\n"); else - printk("and Disabled\n"); - -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif + printk(KERN_CONT "and Disabled\n"); printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); @@ -837,7 +880,8 @@ void __init setup_arch(char **cmdline_p) defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); #else - _bfin_swrst = bfin_read_SYSCR(); + /* Clear boot mode field */ + _bfin_swrst = bfin_read_SYSCR() & ~0xf; #endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT @@ -875,10 +919,7 @@ void __init setup_arch(char **cmdline_p) else printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid()); - if (unlikely(CPUID != bfin_cpuid())) - printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", - CPU, bfin_cpuid(), bfin_revid()); - else { + if (likely(CPUID == bfin_cpuid())) { if (bfin_revid() != bfin_compiled_revid()) { if (bfin_compiled_revid() == -1) printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", @@ -895,10 +936,6 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } - /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ - if (bfin_cpuid() == 0x27de && bfin_revid() == 1) - panic("You can't run on this processor due to 05000448"); - printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", @@ -1121,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" "Calibration\t: %lu loops\n", - (cpudata->loops_per_jiffy * HZ) / 500000, - ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, - (cpudata->loops_per_jiffy * HZ)); + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); /* Check Cache configutation */ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { @@ -1157,16 +1194,25 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache%s) %d KB(L2 cache)\n", - icache_size, dcache_size, -#if defined CONFIG_BFIN_WB - "-wb" -#elif defined CONFIG_BFIN_WT - "-wt" -#endif - "", 0); - + "%d KB(L1 dcache) %d KB(L2 cache)\n", + icache_size, dcache_size, 0); seq_printf(m, "%s\n", cache); + seq_printf(m, "external memory\t: " +#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) + "cacheable" +#else + "uncacheable" +#endif + " in instruction cache\n"); + seq_printf(m, "external memory\t: " +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) + "cacheable (write-back)" +#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH) + "cacheable (write-through)" +#else + "uncacheable" +#endif + " in data cache\n"); if (icache_size) seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", @@ -1239,8 +1285,25 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_num != num_possible_cpus() - 1) return 0; - if (L2_LENGTH) + if (L2_LENGTH) { seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400); + seq_printf(m, "L2 SRAM\t\t: " +#if defined(CONFIG_BFIN_L2_ICACHEABLE) + "cacheable" +#else + "uncacheable" +#endif + " in instruction cache\n"); + seq_printf(m, "L2 SRAM\t\t: " +#if defined(CONFIG_BFIN_L2_WRITEBACK) + "cacheable (write-back)" +#elif defined(CONFIG_BFIN_L2_WRITETHROUGH) + "cacheable (write-through)" +#else + "uncacheable" +#endif + " in data cache\n"); + } seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index a8f1329c15a..3da60fb13ce 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -29,7 +29,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/sem.h> #include <linux/msg.h> diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index d279552fe9b..bf2b2d1f8ae 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -37,6 +37,7 @@ #include <asm/traps.h> #include <asm/cacheflush.h> #include <asm/cplb.h> +#include <asm/dma.h> #include <asm/blackfin.h> #include <asm/irq_handler.h> #include <linux/irq.h> @@ -211,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) console_verbose(); oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE - printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + printk(KERN_EMERG "Double Fault\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { unsigned int cpu = smp_processor_id(); @@ -569,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp) if (kernel_mode_regs(fp) || (current && !current->mm)) { console_verbose(); oops_in_progress = 1; - if (strerror) - verbose_printk(strerror); } if (sig != SIGTRAP) { + if (strerror) + verbose_printk(strerror); + dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); @@ -582,15 +584,14 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M) verbose_printk(KERN_NOTICE "No trace since you do not have " - "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n" - KERN_NOTICE "\n"); + "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n"); else #endif dump_bfin_trace_buffer(); if (oops_in_progress) { /* Dump the current kernel stack */ - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + verbose_printk(KERN_NOTICE "Kernel Stack\n"); show_stack(current, NULL); print_modules(); #ifndef CONFIG_ACCESS_CHECK @@ -619,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp) force_sig_info(sig, &info, current); } - if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) + if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) || + (ANOMALY_05000281 && trapnr == VEC_HWERR) || + (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL))) fp->pc = SAFE_USER_INSTRUCTION; traps_done: @@ -636,57 +639,30 @@ asmlinkage void trap_c(struct pt_regs *fp) */ static bool get_instruction(unsigned short *val, unsigned short *address) { - - unsigned long addr; - - addr = (unsigned long)address; + unsigned long addr = (unsigned long)address; /* Check for odd addresses */ if (addr & 0x1) return false; - /* Check that things do not wrap around */ - if (addr > (addr + 2)) + /* MMR region will never have instructions */ + if (addr >= SYSMMR_BASE) return false; - /* - * Since we are in exception context, we need to do a little address checking - * We need to make sure we are only accessing valid memory, and - * we don't read something in the async space that can hang forever - */ - if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || -#if L2_LENGTH != 0 - (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || -#endif - (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || -#if L1_DATA_A_LENGTH != 0 - (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) || -#endif -#if L1_DATA_B_LENGTH != 0 - (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) || -#endif - (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) || - (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) && - addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) || - (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) && - addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) || - (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) && - addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) || - (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) && - addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) { - *val = *address; - return true; - } - -#if L1_CODE_LENGTH != 0 - if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) { - isram_memcpy(val, address, 2); - return true; + switch (bfin_mem_access_type(addr, 2)) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + *val = *address; + return true; + case BFIN_MEM_ACCESS_DMA: + dma_memcpy(val, address, 2); + return true; + case BFIN_MEM_ACCESS_ITEST: + isram_memcpy(val, address, 2); + return true; + default: /* invalid access */ + return false; } -#endif - - - return false; } /* @@ -932,7 +908,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) ret_addr = 0; if (!j && i % 8 == 0) - printk("\n" KERN_NOTICE "%p:",addr); + printk(KERN_NOTICE "%p:",addr); /* if it is an odd address, or zero, just skip it */ if (*addr & 0x1 || !*addr) @@ -1022,9 +998,9 @@ void dump_bfin_process(struct pt_regs *fp) printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) - verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", + verbose_printk(KERN_NOTICE + "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", (void *)current->mm->start_code, (void *)current->mm->end_code, (void *)current->mm->start_data, @@ -1035,8 +1011,8 @@ void dump_bfin_process(struct pt_regs *fp) else verbose_printk(KERN_NOTICE "invalid mm\n"); } else - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE - "No Valid process in current context\n"); + verbose_printk(KERN_NOTICE + "No Valid process in current context\n"); #endif } @@ -1054,7 +1030,7 @@ void dump_bfin_mem(struct pt_regs *fp) addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; addr++) { if (!((unsigned long)addr & 0xF)) - verbose_printk("\n" KERN_NOTICE "0x%p: ", addr); + verbose_printk(KERN_NOTICE "0x%p: ", addr); if (!get_instruction(&val, addr)) { val = 0; @@ -1082,9 +1058,9 @@ void dump_bfin_mem(struct pt_regs *fp) oops_in_progress)){ verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n" - KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" - " better idea where it came from\n"); + verbose_printk(KERN_NOTICE +"The remaining message may be meaningless\n" +"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); #else /* If we are handling only one peripheral interrupt * and current mm and pid are valid, and the last error @@ -1140,9 +1116,10 @@ void show_regs(struct pt_regs *fp) verbose_printk(KERN_NOTICE "%s", linux_banner); - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); + verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", + print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", - (long)fp->seqstat, fp->ipend, fp->syscfg); + (long)fp->seqstat, fp->ipend, fp->syscfg); if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); @@ -1210,7 +1187,7 @@ unlock: verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n"); + verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", fp->r0, fp->r1, fp->r2, fp->r3); verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c index 84b9c559222..e57bf6fbdf3 100644 --- a/arch/blackfin/lib/lshrdi3.c +++ b/arch/blackfin/lib/lshrdi3.c @@ -27,21 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__ ((mode(SI))); -typedef unsigned int USItype __attribute__ ((mode(SI))); -typedef int DItype __attribute__ ((mode(DI))); -typedef int word_type __attribute__ ((mode(__word__))); - -struct DIstruct { - SItype high, low; -}; - -typedef union { - struct DIstruct s; - DItype ll; -} DIunion; +#include "gcclib.h" #ifdef CONFIG_ARITHMETIC_OPS_L1 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text)); diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 1382f038235..809be268e42 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -119,13 +119,19 @@ static struct platform_device bfin_mac_device = { }; #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) -static struct dsa_platform_data ksz8893m_switch_data = { +static struct dsa_chip_data ksz8893m_switch_chip_data = { .mii_bus = &bfin_mii_bus.dev, + .port_names = { + NULL, + "eth%d", + "eth%d", + "cpu", + }, +}; +static struct dsa_platform_data ksz8893m_switch_data = { + .nr_chips = 1, .netdev = &bfin_mac_device.dev, - .port_names[0] = NULL, - .port_names[1] = "eth%d", - .port_names[2] = "eth%d", - .port_names[3] = "cpu", + .chip = &ksz8893m_switch_chip_data, }; static struct platform_device ksz8893m_switch_device = { @@ -528,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index b69bd9af38d..753ed810e1c 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file should be up to date with: - * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ @@ -18,7 +18,7 @@ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) @@ -45,29 +45,31 @@ /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* Software System Reset Corrupts PLL_LOCKCNT Register */ -#define ANOMALY_05000430 (1) +#define ANOMALY_05000430 (__SILICON_REVISION__ < 1) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ -#define ANOMALY_05000435 (1) +#define ANOMALY_05000435 (__SILICON_REVISION__ < 1) /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ -#define ANOMALY_05000438 (1) +#define ANOMALY_05000438 (__SILICON_REVISION__ < 1) /* Preboot Cannot be Used to Alter the PLL_DIV Register */ -#define ANOMALY_05000439 (1) +#define ANOMALY_05000439 (__SILICON_REVISION__ < 1) /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ -#define ANOMALY_05000440 (1) +#define ANOMALY_05000440 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ -#define ANOMALY_05000444 (1) +#define ANOMALY_05000444 (__SILICON_REVISION__ < 1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (1) +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* PWM_TRIPB Signal Not Available on PG10 */ -#define ANOMALY_05000453 (1) +#define ANOMALY_05000453 (__SILICON_REVISION__ < 1) /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ -#define ANOMALY_05000455 (1) -/* False Hardware Error when RETI points to invalid memory */ +#define ANOMALY_05000455 (__SILICON_REVISION__ < 1) +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -78,24 +80,31 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) @@ -103,10 +112,14 @@ #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) +#define ANOMALY_05000357 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) +#define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000389 (0) @@ -117,5 +130,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index 0fb2ce5d840..dbade93395e 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h index 267bb7c8bfb..e8e14c2769e 100644 --- a/arch/blackfin/mach-bf518/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf518.h" -#include "mem_map.h" #include "defBF512.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h index 62bcc781bfa..3c6777cb353 100644 --- a/arch/blackfin/mach-bf518/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf518/mem_map.h - * based on: include/asm-blackfin/mach-bf527/mem_map.h - * author: Bryan Wu <cooloney@kernel.org> + * BF51x memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF518/6/4/2 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_518_H_ -#define _MEM_MAP_518_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -89,20 +67,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_518_H_ */ +#endif diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 1eaf27ff722..b09484f538f 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -78,7 +78,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, @@ -794,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), .type = "pcf8574_lcd", diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 9f9c0005dcf..2ad68cd10ae 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p16", + .type = "sst25wf040", }; -/* SPI flash chip (m25p64) */ +/* SPI flash chip (sst25wf040) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, @@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 3e5b7db6b06..75e563d3f9d 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -77,7 +77,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, @@ -859,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index c84ddea9574..c438ca89d8c 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -34,7 +34,7 @@ #define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527) #define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527)) -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ @@ -176,6 +176,8 @@ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ #define ANOMALY_05000445 (1) +/* USB DMA Short Packet Data Corruption */ +#define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ #define ANOMALY_05000451 (1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ @@ -184,8 +186,12 @@ #define ANOMALY_05000456 (1) /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ #define ANOMALY_05000457 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -195,24 +201,31 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) @@ -220,6 +233,7 @@ #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) @@ -227,6 +241,5 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) -#define ANOMALY_05000450 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index a625659dd67..ebd6cebc1fb 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h index 417abcd61f4..03665a8e16b 100644 --- a/arch/blackfin/mach-bf527/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf527.h" -#include "mem_map.h" #include "defBF522.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h index 019e0017ad8..d96e894afd2 100644 --- a/arch/blackfin/mach-bf527/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf527/mem_map.h - * based on: include/asm-blackfin/mach-bf537/mem_map.h - * author: Michael Hennerich (michael.hennerich@analog.com) + * BF52x memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF527/5/2 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_527_H_ -#define _MEM_MAP_527_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -89,20 +67,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_527_H_ */ +#endif diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 89a5ec4ca04..4e3e511bf14 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/plat-ram.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -86,6 +87,101 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) +static const char *map_probes[] = { + "stm_flash", + NULL, +}; + +static struct platdata_mtd_ram stm_pri_data_a = { + .mapname = "Flash A Primary", + .map_probes = map_probes, + .bankwidth = 2, +}; + +static struct resource stm_pri_resource_a = { + .start = 0x20000000, + .end = 0x200fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stm_pri_device_a = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &stm_pri_data_a, + }, + .num_resources = 1, + .resource = &stm_pri_resource_a, +}; + +static struct platdata_mtd_ram stm_pri_data_b = { + .mapname = "Flash B Primary", + .map_probes = map_probes, + .bankwidth = 2, +}; + +static struct resource stm_pri_resource_b = { + .start = 0x20100000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stm_pri_device_b = { + .name = "mtd-ram", + .id = 4, + .dev = { + .platform_data = &stm_pri_data_b, + }, + .num_resources = 1, + .resource = &stm_pri_resource_b, +}; +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +static struct platdata_mtd_ram sram_data_a = { + .mapname = "Flash A SRAM", + .bankwidth = 2, +}; + +static struct resource sram_resource_a = { + .start = 0x20240000, + .end = 0x2024ffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sram_device_a = { + .name = "mtd-ram", + .id = 8, + .dev = { + .platform_data = &sram_data_a, + }, + .num_resources = 1, + .resource = &sram_resource_a, +}; + +static struct platdata_mtd_ram sram_data_b = { + .mapname = "Flash B SRAM", + .bankwidth = 2, +}; + +static struct resource sram_resource_b = { + .start = 0x202c0000, + .end = 0x202cffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sram_device_b = { + .name = "mtd-ram", + .id = 9, + .dev = { + .platform_data = &sram_data_b, + }, + .num_resources = 1, + .resource = &sram_resource_b, +}; +#endif + #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, +#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) + &stm_pri_device_a, + &stm_pri_device_b, +#endif + +#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) + &sram_device_a, + &sram_device_b, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a68ade8a3ca..3d743ccaff6 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 31145b509e2..cd83db2fb1a 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -34,7 +34,7 @@ # define ANOMALY_BF533 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) @@ -46,7 +46,7 @@ #define ANOMALY_05000122 (1) /* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ #define ANOMALY_05000158 (__SILICON_REVISION__ < 5) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) @@ -56,13 +56,13 @@ #define ANOMALY_05000180 (1) /* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000183 (__SILICON_REVISION__ < 4) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 4) /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ #define ANOMALY_05000193 (__SILICON_REVISION__ < 4) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 4) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 4) @@ -74,7 +74,7 @@ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) /* Specific Sequence That Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000203 (__SILICON_REVISION__ < 4) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 4) @@ -106,7 +106,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Data CPLBs Should Prevent Spurious Hardware Errors */ +/* Data CPLBs Should Prevent False Hardware Errors */ #define ANOMALY_05000246 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ == 4) @@ -148,21 +148,21 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 6) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 6) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 6) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 6) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 6) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 6) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ @@ -170,11 +170,11 @@ #define ANOMALY_05000310 (1) /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ #define ANOMALY_05000311 (__SILICON_REVISION__ < 6) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 6) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 6) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 6) /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ #define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6) @@ -200,7 +200,7 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are @@ -215,17 +215,17 @@ #define ANOMALY_05000070 (__SILICON_REVISION__ < 2) /* Writing FIO_DIR can corrupt a programmable flag's data */ #define ANOMALY_05000079 (__SILICON_REVISION__ < 2) -/* Timer Auto-Baud Mode requires the UART clock to be enabled */ +/* Timer Auto-Baud Mode requires the UART clock to be enabled. */ #define ANOMALY_05000086 (__SILICON_REVISION__ < 2) /* Internal Clocking Modes on SPORT0 not supported */ #define ANOMALY_05000088 (__SILICON_REVISION__ < 2) /* Internal voltage regulator does not wake up from an RTC wakeup */ #define ANOMALY_05000092 (__SILICON_REVISION__ < 2) -/* The IFLUSH instruction must be preceded by a CSYNC instruction */ +/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */ #define ANOMALY_05000093 (__SILICON_REVISION__ < 2) -/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */ +/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */ #define ANOMALY_05000095 (__SILICON_REVISION__ < 2) -/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */ +/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */ #define ANOMALY_05000096 (__SILICON_REVISION__ < 2) /* Performance Monitor 0 and 1 are swapped when monitoring memory events */ #define ANOMALY_05000097 (__SILICON_REVISION__ < 2) @@ -235,45 +235,45 @@ #define ANOMALY_05000100 (__SILICON_REVISION__ < 2) /* Reading X_MODIFY or Y_MODIFY while DMA channel is active */ #define ANOMALY_05000101 (__SILICON_REVISION__ < 2) -/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ +/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ #define ANOMALY_05000102 (__SILICON_REVISION__ < 2) -/* Incorrect value written to the cycle counters */ +/* Incorrect Value Written to the Cycle Counters */ #define ANOMALY_05000103 (__SILICON_REVISION__ < 2) -/* Stores to L1 Data memory incorrect when a specific sequence is followed */ +/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */ #define ANOMALY_05000104 (__SILICON_REVISION__ < 2) /* Programmable Flag (PF3) functionality not supported in all PPI modes */ #define ANOMALY_05000106 (__SILICON_REVISION__ < 2) /* Data store can be lost when targeting a cache line fill */ #define ANOMALY_05000107 (__SILICON_REVISION__ < 2) -/* Reserved bits in SYSCFG register not set at power on */ +/* Reserved Bits in SYSCFG Register Not Set at Power-On */ #define ANOMALY_05000109 (__SILICON_REVISION__ < 3) /* Infinite Core Stall */ #define ANOMALY_05000114 (__SILICON_REVISION__ < 2) -/* PPI_FSx may glitch when generated by the on chip Timers */ +/* PPI_FSx may glitch when generated by the on chip Timers. */ #define ANOMALY_05000115 (__SILICON_REVISION__ < 2) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */ #define ANOMALY_05000117 (__SILICON_REVISION__ < 2) /* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */ #define ANOMALY_05000118 (__SILICON_REVISION__ < 2) -/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */ #define ANOMALY_05000123 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000124 (__SILICON_REVISION__ < 3) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) /* SPI clock polarity and phase bits incorrect during booting */ #define ANOMALY_05000126 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL is not set on Reset */ +/* DMEM_CONTROL<12> Is Not Set on Reset */ #define ANOMALY_05000137 (__SILICON_REVISION__ < 3) /* SPI boot will not complete if there is a zero fill block in the loader file */ #define ANOMALY_05000138 (__SILICON_REVISION__ == 2) -/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */ +/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */ #define ANOMALY_05000139 (__SILICON_REVISION__ < 2) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -287,7 +287,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */ #define ANOMALY_05000148 (__SILICON_REVISION__ < 3) /* Frame Delay in SPORT Multichannel Mode */ #define ANOMALY_05000153 (__SILICON_REVISION__ < 3) @@ -295,13 +295,13 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ #define ANOMALY_05000155 (__SILICON_REVISION__ < 3) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 3) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 3) /* DMA vs Core accesses to external memory */ #define ANOMALY_05000173 (__SILICON_REVISION__ < 3) @@ -309,15 +309,15 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 3) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 3) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 3) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 3) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 3) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) -/* In PPI Transmit Modes with External Frame Syncs POLC */ +/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) @@ -326,6 +326,7 @@ #define ANOMALY_05000120 (0) #define ANOMALY_05000149 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) @@ -334,6 +335,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) @@ -345,5 +347,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index a3789d7ccf8..4062e24e759 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h index 045184f81a2..39aa175f19f 100644 --- a/arch/blackfin/mach-bf533/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -34,7 +34,6 @@ #define BF533_FAMILY #include "bf533.h" -#include "mem_map.h" #include "defBF532.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h index fc33b7cb993..197af1a398a 100644 --- a/arch/blackfin/mach-bf533/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * File: include/asm-blackfin/mach-bf533/mem_map.h - * Based on: - * Author: + * BF533 memory map * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_533_H_ -#define _MEM_MAP_533_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -158,20 +136,4 @@ #endif -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_533_H_ */ +#endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ff7228caa7d..bd656907b8c 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -79,7 +79,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, @@ -1314,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), - .irq = IRQ_PF5, + .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index fc966342546..e66aa131f51 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -34,13 +34,13 @@ # define ANOMALY_BF537 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) @@ -50,11 +50,11 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +/* Buffered CLKIN Output Is Disabled by Default */ #define ANOMALY_05000247 (1) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) -/* EMAC Tx DMA error after an early frame abort */ +/* EMAC TX DMA Error After an Early Frame Abort */ #define ANOMALY_05000252 (__SILICON_REVISION__ < 3) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (__SILICON_REVISION__ < 3) @@ -62,7 +62,7 @@ #define ANOMALY_05000254 (__SILICON_REVISION__ > 2) /* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ #define ANOMALY_05000255 (__SILICON_REVISION__ < 3) -/* EMAC MDIO input latched on wrong MDC edge */ +/* EMAC MDIO Input Latched on Wrong MDC Edge */ #define ANOMALY_05000256 (__SILICON_REVISION__ < 3) /* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ #define ANOMALY_05000257 (__SILICON_REVISION__ < 3) @@ -80,7 +80,7 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 3) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */ #define ANOMALY_05000268 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 3) @@ -92,15 +92,15 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) -/* SPI Master boot mode does not work well with Atmel Data flash devices */ +/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 3) -/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */ #define ANOMALY_05000285 (__SILICON_REVISION__ < 3) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 3) @@ -112,25 +112,25 @@ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) -/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */ #define ANOMALY_05000309 (__SILICON_REVISION__ < 3) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: collisions occur in Full Duplex mode */ +/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */ #define ANOMALY_05000316 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */ #define ANOMALY_05000321 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot */ +/* UART Gets Disabled after UART Boot */ #define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) @@ -154,7 +154,7 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ @@ -165,14 +165,18 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) @@ -183,6 +187,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) @@ -195,5 +200,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b86662fb9de..e95d54f9af6 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index 7d6069c886f..f5e5015ad83 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -35,7 +35,6 @@ #define BF537_FAMILY #include "bf537.h" -#include "mem_map.h" #include "defBF534.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h index f9010c4b4bf..942f08de306 100644 --- a/arch/blackfin/mach-bf537/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf537/mem_map.h - * based on: - * author: + * BF537 memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF537/6/4 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_537_H_ -#define _MEM_MAP_537_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -166,20 +144,4 @@ #endif -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_537_H_ */ +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 175ca9ef723..451cf8a82a4 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -30,13 +30,13 @@ # define ANOMALY_BF539 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (1) @@ -70,11 +70,11 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 4) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 4) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 4) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 4) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 4) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 4) @@ -92,11 +92,11 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 4) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 5) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 4) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 4) /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ #define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4) @@ -110,7 +110,7 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 5) /* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */ #define ANOMALY_05000374 (__SILICON_REVISION__ == 4) -/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */ +/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */ #define ANOMALY_05000375 (__SILICON_REVISION__ < 4) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ #define ANOMALY_05000402 (__SILICON_REVISION__ < 4) @@ -126,26 +126,33 @@ #define ANOMALY_05000436 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) #define ANOMALY_05000120 (0) +#define ANOMALY_05000125 (0) #define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000182 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) #define ANOMALY_05000254 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000305 (0) @@ -154,6 +161,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) @@ -166,5 +174,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index c536551eb4b..999f239fe1a 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h index 6f628353dde..9496196ac16 100644 --- a/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -35,7 +35,6 @@ #define BF538_FAMILY #include "bf538.h" -#include "mem_map.h" #include "defBF539.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h index 76811966690..aff00f453e9 100644 --- a/arch/blackfin/mach-bf538/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * File: include/asm-blackfin/mach-bf538/mem_map.h - * Based on: - * Author: + * BF538 memory map * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_538_H_ -#define _MEM_MAP_538_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ @@ -93,21 +71,4 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ - -/* Level 2 Memory - none */ - -#define L2_START 0 -#define L2_LENGTH 0 - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif /* _MEM_MAP_538_H_ */ +#endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 805a57b5e65..dc0dd9b2bce 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -76,7 +76,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, @@ -865,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index c510ae688e2..cd040fe0bc5 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -18,7 +18,7 @@ # error will not work on BF548 silicon version 0.0, or 0.1 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) @@ -30,17 +30,17 @@ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 1) /* TWI Slave Boot Mode Is Not Functional */ #define ANOMALY_05000324 (__SILICON_REVISION__ < 1) -/* External FIFO Boot Mode Is Not Functional */ +/* FIFO Boot Mode Not Functional */ #define ANOMALY_05000325 (__SILICON_REVISION__ < 2) /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ #define ANOMALY_05000327 (__SILICON_REVISION__ < 1) @@ -178,8 +178,12 @@ #define ANOMALY_05000450 (1) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ #define ANOMALY_05000456 (__SILICON_REVISION__ < 3) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -189,33 +193,41 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) #define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) #define ANOMALY_05000248 (0) #define ANOMALY_05000250 (0) #define ANOMALY_05000254 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000287 (0) #define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index cf6c1500222..6b97396d817 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -33,7 +33,6 @@ #define _MACH_BLACKFIN_H_ #include "bf548.h" -#include "mem_map.h" #include "anomaly.h" #ifdef CONFIG_BF542 diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h index 70b9c119402..caac2dfb41e 100644 --- a/arch/blackfin/mach-bf548/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h @@ -1,38 +1,16 @@ /* - * file: include/asm-blackfin/mach-bf548/mem_map.h - * based on: - * author: + * BF548 memory map * - * created: - * description: - * Memory MAP Common header file for blackfin BF537/6/4 of processors. - * rev: - * - * modified: - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_548_H_ -#define _MEM_MAP_548_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ @@ -103,15 +81,4 @@ # define L2_LENGTH 0x20000 #endif -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; - -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) - -#endif/* _MEM_MAP_548_H_ */ +#endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index b5ef7ff7b7b..4df904f9e90 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -62,7 +62,6 @@ static struct resource bfin_isp1760_resources[] = { static struct isp1760_platform_data isp1760_priv = { .is_isp1761 = 0, - .port1_disable = 0, .bus_width_16 = 1, .port1_otg = 0, .analog_oc = 0, diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index dccd396cd93..a5312b2d267 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -18,19 +18,19 @@ # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) -/* Testset instructions restricted to 32-bit aligned memory locations */ +/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */ #define ANOMALY_05000120 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) -/* Signbits instruction not functional under certain conditions */ +/* SIGNBITS Instruction Not Functional under Certain Conditions */ #define ANOMALY_05000127 (1) /* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ #define ANOMALY_05000134 (__SILICON_REVISION__ < 3) @@ -40,7 +40,7 @@ #define ANOMALY_05000136 (__SILICON_REVISION__ < 3) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -52,7 +52,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* IMDMA S1/D1 channel may stall */ +/* IMDMA S1/D1 Channel May Stall */ #define ANOMALY_05000149 (1) /* DMA engine may lose data due to incorrect handshaking */ #define ANOMALY_05000150 (__SILICON_REVISION__ < 3) @@ -66,7 +66,7 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ #define ANOMALY_05000156 (__SILICON_REVISION__ < 4) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000159 (__SILICON_REVISION__ < 3) @@ -76,17 +76,17 @@ #define ANOMALY_05000161 (__SILICON_REVISION__ < 3) /* DMEM_CONTROL<12> is not set on Reset */ #define ANOMALY_05000162 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 5) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 5) -/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */ #define ANOMALY_05000171 (__SILICON_REVISION__ < 5) /* DSPID register values incorrect */ #define ANOMALY_05000172 (__SILICON_REVISION__ < 3) @@ -96,29 +96,29 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 5) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 5) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 5) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (__SILICON_REVISION__ < 5) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 5) -/* IMDMA does not operate to full speed for 600MHz and higher devices */ +/* Internal Memory DMA Does Not Operate at Full Speed */ #define ANOMALY_05000182 (1) -/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000184 (__SILICON_REVISION__ < 5) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 5) -/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */ #define ANOMALY_05000186 (__SILICON_REVISION__ < 5) /* IMDMA Corrupted Data after a Halt */ #define ANOMALY_05000187 (1) /* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ #define ANOMALY_05000188 (__SILICON_REVISION__ < 5) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 5) -/* PPI not functional at core voltage < 1Volt */ +/* PPI Not Functional at Core Voltage < 1Volt */ #define ANOMALY_05000190 (1) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) @@ -126,7 +126,7 @@ #define ANOMALY_05000193 (__SILICON_REVISION__ < 5) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 5) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 5) @@ -134,9 +134,9 @@ #define ANOMALY_05000200 (__SILICON_REVISION__ < 5) /* Possible Infinite Stall with Specific Dual-DAG Situation */ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 5) -/* Specific sequence that can cause DMA error or DMA stopping */ +/* Specific Sequence that Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000205 (__SILICON_REVISION__ < 5) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 5) @@ -158,7 +158,7 @@ #define ANOMALY_05000230 (__SILICON_REVISION__ < 5) /* UART STB Bit Incorrectly Affects Receiver Setting */ #define ANOMALY_05000231 (__SILICON_REVISION__ < 5) -/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */ #define ANOMALY_05000232 (__SILICON_REVISION__ < 5) /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ #define ANOMALY_05000242 (__SILICON_REVISION__ < 5) @@ -166,7 +166,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (__SILICON_REVISION__ < 5) -/* TESTSET operation forces stall on the other core */ +/* TESTSET Operation Forces Stall on the Other Core */ #define ANOMALY_05000248 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) @@ -192,9 +192,9 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 5) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (__SILICON_REVISION__ < 5) -/* IMDMA destination IRQ status must be read prior to using IMDMA */ +/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */ #define ANOMALY_05000266 (__SILICON_REVISION__ > 3) -/* IMDMA may corrupt data under certain conditions */ +/* IMDMA May Corrupt Data under Certain Conditions */ #define ANOMALY_05000267 (1) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ #define ANOMALY_05000269 (1) @@ -202,7 +202,7 @@ #define ANOMALY_05000270 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* Data cache write back to external synchronous memory may be lost */ +/* Data Cache Write Back to External Synchronous Memory May Be Lost */ #define ANOMALY_05000274 (1) /* PPI Timing and Sampling Information Updates */ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) @@ -212,17 +212,17 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 5) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) -/* A read will receive incorrect data under certain conditions */ +/* Reads Will Receive Incorrect Data under Certain Conditions */ #define ANOMALY_05000287 (__SILICON_REVISION__ < 5) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 5) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (1) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) @@ -230,25 +230,25 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (1) -/* PF2 Output Remains Asserted After SPI Master Boot */ +/* PF2 Output Remains Asserted after SPI Master Boot */ #define ANOMALY_05000320 (__SILICON_REVISION__ > 3) -/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +/* Erroneous GPIO Flag Pin Operations under Specific Sequences */ #define ANOMALY_05000323 (1) -/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */ #define ANOMALY_05000326 (__SILICON_REVISION__ > 3) -/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +/* 24-Bit SPI Boot Mode Is Not Functional */ #define ANOMALY_05000331 (__SILICON_REVISION__ < 5) -/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +/* Slave SPI Boot Mode Is Not Functional */ #define ANOMALY_05000332 (__SILICON_REVISION__ < 5) -/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */ #define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000339 (__SILICON_REVISION__ < 5) /* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ #define ANOMALY_05000343 (__SILICON_REVISION__ < 5) @@ -276,7 +276,7 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) -/* False Hardware Error when RETI points to invalid memory */ +/* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Anomalies that don't exist on this proc */ @@ -284,9 +284,11 @@ #define ANOMALY_05000158 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) @@ -298,5 +300,7 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index a1b50878553..fd5e8878b8c 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,7 +53,7 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h index f79f6626b7e..8be31358ef8 100644 --- a/arch/blackfin/mach-bf561/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h @@ -34,7 +34,6 @@ #define BF561_FAMILY #include "bf561.h" -#include "mem_map.h" #include "defBF561.h" #include "anomaly.h" diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index 419dffdc96e..5b96ea549a0 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -1,13 +1,16 @@ /* - * Memory MAP - * Common header file for blackfin BF561 of processors. + * BF561 memory map + * + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ -#ifndef _MEM_MAP_561_H_ -#define _MEM_MAP_561_H_ +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif /* Async Memory Banks */ #define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ @@ -34,7 +37,6 @@ /* Memory Map for ADSP-BF561 processors */ -#ifdef CONFIG_BF561 #define COREA_L1_CODE_START 0xFFA00000 #define COREA_L1_DATA_A_START 0xFF800000 #define COREA_L1_DATA_B_START 0xFF900000 @@ -71,6 +73,28 @@ #define BFIN_DCACHESIZE (0*1024) #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ + +/* + * If we are in SMP mode, then the cache settings of Core B will match + * the settings of Core A. If we aren't, then we assume Core B is not + * using any cache. This allows the rest of the kernel to work with + * the core in either mode as we are only loading user code into it and + * it is the user's problem to make sure they aren't doing something + * stupid there. + * + * Note that we treat the L1 code region as a contiguous blob to make + * the rest of the kernel simpler. Easier to check one region than a + * bunch of small ones. Again, possible misbehavior here is the fault + * of the user -- don't try to use memory that doesn't exist. + */ +#ifdef CONFIG_SMP +# define COREB_L1_CODE_LENGTH L1_CODE_LENGTH +# define COREB_L1_DATA_A_LENGTH L1_DATA_A_LENGTH +# define COREB_L1_DATA_B_LENGTH L1_DATA_B_LENGTH +#else +# define COREB_L1_CODE_LENGTH 0x14000 +# define COREB_L1_DATA_A_LENGTH 0x8000 +# define COREB_L1_DATA_B_LENGTH 0x8000 #endif /* Level 2 Memory */ @@ -82,9 +106,6 @@ #define COREA_L1_SCRATCH_START 0xFFB00000 #define COREB_L1_SCRATCH_START 0xFF700000 -#define L1_SCRATCH_START COREA_L1_SCRATCH_START -#define L1_SCRATCH_LENGTH 0x1000 - #ifdef __ASSEMBLY__ /* @@ -155,14 +176,42 @@ dreg = ROT dreg BY -1; \ dreg = CC; -#else -#define GET_PDA_SAFE(preg) \ - preg.l = _cpu_pda; \ - preg.h = _cpu_pda; +static inline unsigned long get_l1_scratch_start_cpu(int cpu) +{ + return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START; +} +static inline unsigned long get_l1_code_start_cpu(int cpu) +{ + return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START; +} +static inline unsigned long get_l1_data_a_start_cpu(int cpu) +{ + return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START; +} +static inline unsigned long get_l1_data_b_start_cpu(int cpu) +{ + return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START; +} + +static inline unsigned long get_l1_scratch_start(void) +{ + return get_l1_scratch_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_code_start(void) +{ + return get_l1_code_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_data_a_start(void) +{ + return get_l1_data_a_start_cpu(blackfin_core_id()); +} +static inline unsigned long get_l1_data_b_start(void) +{ + return get_l1_data_b_start_cpu(blackfin_core_id()); +} -#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) #endif /* CONFIG_SMP */ #endif /* __ASSEMBLY__ */ -#endif /* _MEM_MAP_533_H_ */ +#endif diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 1f3228ed713..dd8b2dc97f5 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,7 +4,7 @@ obj-y := \ cache.o cache-c.o entry.o head.o \ - interrupt.o irqpanic.o arch_checks.o ints-priority.o + interrupt.o arch_checks.o ints-priority.o obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o @@ -12,3 +12,4 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o +obj-$(CONFIG_DEBUG_ICACHE_CHECK) += irqpanic.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index da93d920716..5998d8632a7 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -74,7 +74,7 @@ /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */ #if ANOMALY_05000220 && \ - ((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \ - (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB))) + ((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \ + (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. #endif diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 70e3411f558..85c65808327 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -141,7 +141,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) sclk = get_sclk() / 1000; #if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) + (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) min_cclk = sclk * 2; #else min_cclk = sclk; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 31fa313e81c..fb1795d5be2 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -218,7 +218,7 @@ ENTRY(_ex_single_step) /* Single stepping only a single instruction, so clear the trace * bit here. */ r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); syscfg = R7; jump _ex_trap_c; @@ -251,7 +251,7 @@ ENTRY(_ex_single_step) if !cc jump _bfin_return_from_exception; r7 = syscfg; - bitclr (r7, 0); + bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = R7; /* Fall through to _bfin_return_from_exception. */ @@ -342,9 +342,11 @@ ENTRY(_ex_trap_c) r6 = retx; [p5 + PDA_RETX] = r6; #endif + /* Save the state of single stepping */ r6 = SYSCFG; [p5 + PDA_SYSCFG] = r6; - BITCLR(r6, 0); + /* Clear it while we handle the exception in IRQ5 mode */ + BITCLR(r6, SYSCFG_SSSTEP_P); SYSCFG = r6; /* Disable all interrupts, but make sure level 5 is enabled so @@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c) * exception. This is a unrecoverable event, so crash. * Note: this cannot be ENTRY() as we jump here with "if cc jump" ... */ -_double_fault: +ENTRY(_double_fault) /* Turn caches & protection off, to ensure we don't get any more * double exceptions */ @@ -872,7 +874,7 @@ ENTRY(_ret_from_exception) raise 15; /* raise evt15 to do signal or reschedule */ 4: r0 = syscfg; - bitclr(r0, 0); + bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */ syscfg = r0; 5: rts; @@ -1609,6 +1611,7 @@ ENTRY(_sys_call_table) .long _sys_preadv .long _sys_pwritev .long _sys_rt_tgsigqueueinfo + .long _sys_perf_counter_open .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 351afd0e36d..b42150190d0 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -472,7 +472,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (__test_bit(gpionr, gpio_enabled)) + if (test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } @@ -782,7 +782,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (__test_bit(gpionr, gpio_enabled)) + if (test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } @@ -1052,35 +1052,34 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif -#if defined(CONFIG_TICKSOURCE_GPTMR0) - case IRQ_TIMER0: - set_irq_handler(irq, handle_percpu_irq); - break; -#endif #ifdef CONFIG_SMP case IRQ_SUPPLE_0: case IRQ_SUPPLE_1: set_irq_handler(irq, handle_percpu_irq); break; #endif - default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be - * masked, because ISRs may trigger interrupts - * recursively (e.g. DMA), but interrupts are - * _not_ masked at CPU level. So let's handle - * most of them as level interrupts, except - * the timer interrupt which is special. - */ - if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) - set_irq_handler(irq, handle_simple_irq); - else - set_irq_handler(irq, handle_level_irq); +#ifndef CONFIG_TICKSOURCE_CORETMR + case IRQ_TIMER0: + set_irq_handler(irq, handle_simple_irq); + break; +#endif /* !CONFIG_TICKSOURCE_CORETMR */ + case IRQ_CORETMR: + set_irq_handler(irq, handle_simple_irq); + break; + default: + set_irq_handler(irq, handle_level_irq); + break; #else /* !CONFIG_IPIPE */ +#ifdef CONFIG_TICKSOURCE_GPTMR0 + case IRQ_TIMER0: + set_irq_handler(irq, handle_percpu_irq); + break; +#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + default: set_irq_handler(irq, handle_simple_irq); -#endif /* !CONFIG_IPIPE */ break; +#endif /* !CONFIG_IPIPE */ } } @@ -1224,15 +1223,14 @@ __attribute__((l1_text)) asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); - struct ipipe_domain *this_domain = ipipe_current_domain; + struct ipipe_domain *this_domain = __ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; int irq, s; - if (likely(vec == EVT_IVTMR_P)) { + if (likely(vec == EVT_IVTMR_P)) irq = IRQ_CORETMR; - - } else { + else { #if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; @@ -1262,12 +1260,11 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) break; } #endif - irq = ivg->irqno; } if (irq == IRQ_SYSTMR) { -#ifndef CONFIG_GENERIC_CLOCKEVENTS +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0) bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ #endif /* This is basically what we need from the register frame. */ diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index 05004df0f78..883e3241b17 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -30,21 +30,17 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <asm/traps.h> #include <asm/blackfin.h> -#ifdef CONFIG_DEBUG_ICACHE_CHECK #define L1_ICACHE_START 0xffa10000 #define L1_ICACHE_END 0xffa13fff -void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); -#endif /* * irq_panic - calls panic with string setup */ +__attribute__ ((l1_text)) asmlinkage void irq_panic(int reason, struct pt_regs *regs) { -#ifdef CONFIG_DEBUG_ICACHE_CHECK unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; unsigned short i, j, die; unsigned int bad[10][6]; @@ -126,9 +122,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) bad[j][3], bad[j][4], bad[j][5]); } panic("icache coherency error"); - } else { + } else printk(KERN_EMERG "icache checked, and OK\n"); - } -#endif - } diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index bce5a84be49..9e7e27b7fc8 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -132,7 +132,7 @@ int bf53x_resume_l1_mem(unsigned char *memptr) return 0; } -#ifdef CONFIG_BFIN_WB +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) static void flushinv_all_dcache(void) { u32 way, bank, subbank, set; @@ -175,7 +175,7 @@ static inline void dcache_disable(void) #ifdef CONFIG_BFIN_DCACHE unsigned long ctrl; -#ifdef CONFIG_BFIN_WB +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) flushinv_all_dcache(); #endif SSYNC(); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 61840059dfa..349ee3f5466 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) return 0; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, cpu_set(cpu, callmap); msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return -ENOMEM; INIT_LIST_HEAD(&msg->list); msg->call_struct.func = func; msg->call_struct.info = info; @@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -314,6 +320,8 @@ void smp_send_stop(void) return; msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + if (!msg) + return; memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; @@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned int cpu; for_each_online_cpu(cpu) - bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; + bogosum += loops_per_jiffy; printk(KERN_INFO "SMP: Total of %d processors activated " "(%lu.%02lu BogoMIPS).\n", diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 014a55abd09..68bd0bd680c 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -160,7 +160,7 @@ void __init mem_init(void) /* do not count in kernel image between _rambase and _ramstart */ reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; -#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) +#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT; #endif |