diff options
Diffstat (limited to 'arch/cris/arch-v10')
| -rw-r--r-- | arch/cris/arch-v10/drivers/ds1302.c | 20 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/eeprom.c | 48 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/i2c.c | 1 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/pcf8563.c | 19 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/sync_serial.c | 1 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/irq.c | 8 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/process.c | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/time.c | 37 | ||||
| -rw-r--r-- | arch/cris/arch-v10/lib/dmacopy.c | 15 | ||||
| -rw-r--r-- | arch/cris/arch-v10/lib/hw_settings.S | 14 |
10 files changed, 65 insertions, 100 deletions
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c index 77630df9434..884275629ef 100644 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ b/arch/cris/arch-v10/drivers/ds1302.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/miscdevice.h> #include <linux/delay.h> +#include <linux/smp_lock.h> #include <linux/bcd.h> #include <linux/capability.h> @@ -238,9 +239,7 @@ static unsigned char days_in_mo[] = /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */ -static int -rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned long flags; @@ -354,6 +353,17 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } } +static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int ret; + + lock_kernel(); + ret = rtc_ioctl(file, cmd, arg); + unlock_kernel(); + + return ret; +} + static void print_rtc_status(void) { @@ -375,8 +385,8 @@ print_rtc_status(void) /* The various file operations we support. */ static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .ioctl = rtc_ioctl, + .owner = THIS_MODULE, + .unlocked_ioctl = rtc_unlocked_ioctl, }; /* Probe for the chip by writing something to its RAM and try reading it back. */ diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 1f2ae909d3e..c3405507a3d 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -73,8 +73,7 @@ struct eeprom_type int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */ /* this one is to keep the read/write operations atomic */ - wait_queue_head_t wait_q; - volatile int busy; + struct mutex lock; int retry_cnt_addr; /* Used to keep track of number of retries for adaptive timing adjustments */ int retry_cnt_read; @@ -115,8 +114,7 @@ const struct file_operations eeprom_fops = int __init eeprom_init(void) { - init_waitqueue_head(&eeprom.wait_q); - eeprom.busy = 0; + mutex_init(&eeprom.lock); #ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE #define EETEXT "Found" @@ -439,10 +437,7 @@ static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig) static int eeprom_read_buf(loff_t addr, char * buf, int count) { - struct file f; - - f.f_pos = addr; - return eeprom_read(&f, buf, count, &addr); + return eeprom_read(NULL, buf, count, &addr); } @@ -452,7 +447,7 @@ static int eeprom_read_buf(loff_t addr, char * buf, int count) static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off) { int read=0; - unsigned long p = file->f_pos; + unsigned long p = *off; unsigned char page; @@ -461,12 +456,9 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t return -EFAULT; } - wait_event_interruptible(eeprom.wait_q, !eeprom.busy); - if (signal_pending(current)) + if (mutex_lock_interruptible(&eeprom.lock)) return -EINTR; - eeprom.busy++; - page = (unsigned char) (p >> 8); if(!eeprom_address(p)) @@ -476,8 +468,7 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t i2c_stop(); /* don't forget to wake them up */ - eeprom.busy--; - wake_up_interruptible(&eeprom.wait_q); + mutex_unlock(&eeprom.lock); return -EFAULT; } @@ -501,11 +492,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t if(read > 0) { - file->f_pos += read; + *off += read; } - eeprom.busy--; - wake_up_interruptible(&eeprom.wait_q); + mutex_unlock(&eeprom.lock); return read; } @@ -513,11 +503,7 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t static int eeprom_write_buf(loff_t addr, const char * buf, int count) { - struct file f; - - f.f_pos = addr; - - return eeprom_write(&f, buf, count, &addr); + return eeprom_write(NULL, buf, count, &addr); } @@ -534,16 +520,14 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, return -EFAULT; } - wait_event_interruptible(eeprom.wait_q, !eeprom.busy); /* bail out if we get interrupted */ - if (signal_pending(current)) + if (mutex_lock_interruptible(&eeprom.lock)) return -EINTR; - eeprom.busy++; for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++) { restart = 0; written = 0; - p = file->f_pos; + p = *off; while( (written < count) && (p < eeprom.size)) @@ -556,8 +540,7 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, i2c_stop(); /* don't forget to wake them up */ - eeprom.busy--; - wake_up_interruptible(&eeprom.wait_q); + mutex_unlock(&eeprom.lock); return -EFAULT; } #ifdef EEPROM_ADAPTIVE_TIMING @@ -669,12 +652,11 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count, } /* while */ } /* for */ - eeprom.busy--; - wake_up_interruptible(&eeprom.wait_q); - if (written == 0 && file->f_pos >= eeprom.size){ + mutex_unlock(&eeprom.lock); + if (written == 0 && p >= eeprom.size){ return -ENOSPC; } - file->f_pos += written; + *off = p; return written; } diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 7f656ae0b21..a8737a8eb22 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 1e90c1a9c84..7dcb1f85f42 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/bcd.h> #include <linux/mutex.h> +#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -53,7 +54,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */ static const unsigned char days_in_month[] = { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; -int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); +static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long); /* Cache VL bit value read at driver init since writing the RTC_SECOND * register clears the VL status. @@ -62,7 +63,7 @@ static int voltage_low; static const struct file_operations pcf8563_fops = { .owner = THIS_MODULE, - .ioctl = pcf8563_ioctl, + .unlocked_ioctl = pcf8563_unlocked_ioctl, }; unsigned char @@ -212,8 +213,7 @@ pcf8563_exit(void) * ioctl calls for this driver. Why return -ENOTTY upon error? Because * POSIX says so! */ -int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) +static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { /* Some sanity checks. */ if (_IOC_TYPE(cmd) != RTC_MAGIC) @@ -339,6 +339,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, return 0; } +static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + int ret; + + lock_kernel(); + return pcf8563_ioctl(filp, cmd, arg); + unlock_kernel(); + + return ret; +} + static int __init pcf8563_register(void) { if (pcf8563_init() < 0) { diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 562b9a7feae..109dcd826d1 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -17,7 +17,6 @@ #include <linux/errno.h> #include <linux/major.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/poll.h> #include <linux/init.h> diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index 1a61efc1398..a0c0df8be9c 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -17,8 +17,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); -#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); +#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); +#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is * global just so that the kernel gdb can use it. @@ -116,12 +116,12 @@ static unsigned int startup_crisv10_irq(unsigned int irq) static void enable_crisv10_irq(unsigned int irq) { - unmask_irq(irq); + crisv10_unmask_irq(irq); } static void disable_crisv10_irq(unsigned int irq) { - mask_irq(irq); + crisv10_mask_irq(irq); } static void ack_crisv10_irq(unsigned int irq) diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index c4c69cf721e..93f0f64b132 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -11,9 +11,9 @@ */ #include <linux/sched.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/fs.h> -#include <linux/slab.h> #include <arch/svinto.h> #include <linux/init.h> diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 31ca1418d5a..30adae594ae 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -26,7 +26,6 @@ /* it will make jiffies at 96 hz instead of 100 hz though */ #undef USE_CASCADE_TIMERS -extern void update_xtime_from_cmos(void); extern int set_rtc_mmss(unsigned long nowtime); extern int have_rtc; @@ -188,8 +187,6 @@ stop_watchdog(void) #endif } -/* last time the cmos clock got updated */ -static long last_rtc_update = 0; /* * timer_interrupt() needs to keep up the real-time clock, @@ -232,24 +229,6 @@ timer_interrupt(int irq, void *dev_id) do_timer(1); cris_do_profile(regs); /* Save profiling information */ - - /* - * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - * - * The division here is not time critical since it will run once in - * 11 minutes - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 && - (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) { - if (set_rtc_mmss(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ - } return IRQ_HANDLED; } @@ -274,22 +253,10 @@ time_init(void) */ loops_per_usec = 50; - if(RTC_INIT() < 0) { - /* no RTC, start at 1980 */ - xtime.tv_sec = 0; - xtime.tv_nsec = 0; + if(RTC_INIT() < 0) have_rtc = 0; - } else { - /* get the current time */ + else have_rtc = 1; - update_xtime_from_cmos(); - } - - /* - * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the - * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC). - */ - set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); /* Setup the etrax timers * Base frequency is 25000 hz, divider 250 -> 100 HZ diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c index e5fb44f505c..49f5b8ca5b4 100644 --- a/arch/cris/arch-v10/lib/dmacopy.c +++ b/arch/cris/arch-v10/lib/dmacopy.c @@ -1,5 +1,4 @@ -/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - * +/* * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax */ @@ -13,11 +12,11 @@ void *dma_memcpy(void *pdst, unsigned int pn) { static etrax_dma_descr indma, outdma; - - D(printk("dma_memcpy %d bytes... ", pn)); + + D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn)); #if 0 - *R_GEN_CONFIG = genconfig_shadow = + *R_GEN_CONFIG = genconfig_shadow = (genconfig_shadow & ~0x3c0000) | IO_STATE(R_GEN_CONFIG, dma6, intdma7) | IO_STATE(R_GEN_CONFIG, dma7, intdma6); @@ -32,11 +31,11 @@ void *dma_memcpy(void *pdst, *R_DMA_CH7_FIRST = &outdma; *R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start); *R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start); - - while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ; - D(printk("done\n")); + while (*R_DMA_CH7_CMD == 1) + /* wait for completion */; + D(printk(KERN_DEBUG "done\n")); } diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S index 56905aaa7b6..c09f19f478a 100644 --- a/arch/cris/arch-v10/lib/hw_settings.S +++ b/arch/cris/arch-v10/lib/hw_settings.S @@ -1,13 +1,11 @@ /* - * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - * * This table is used by some tools to extract hardware parameters. * The table should be included in the kernel and the decompressor. * Don't forget to update the tools if you change this table. * * Copyright (C) 2001 Axis Communications AB * - * Authors: Mikael Starvik (starvik@axis.com) + * Authors: Mikael Starvik (starvik@axis.com) */ #define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ @@ -15,13 +13,13 @@ #define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) - + .ascii "HW_PARAM_MAGIC" ; Magic number .dword 0xc0004000 ; Kernel start address ; Debug port #ifdef CONFIG_ETRAX_DEBUG_PORT0 - .dword 0 + .dword 0 #elif defined(CONFIG_ETRAX_DEBUG_PORT1) .dword 1 #elif defined(CONFIG_ETRAX_DEBUG_PORT2) @@ -30,7 +28,7 @@ .dword 3 #else .dword 4 ; No debug -#endif +#endif ; SDRAM or EDO DRAM? #ifdef CONFIG_ETRAX_SDRAM @@ -39,7 +37,7 @@ .dword 0 #endif - ; Register values + ; Register values .dword R_WAITSTATES .dword CONFIG_ETRAX_DEF_R_WAITSTATES .dword R_BUS_CONFIG @@ -56,7 +54,7 @@ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING #endif .dword R_PORT_PA_SET - .dword PA_SET_VALUE + .dword PA_SET_VALUE .dword R_PORT_PB_SET .dword PB_SET_VALUE .dword 0 ; No more register values |