diff options
Diffstat (limited to 'arch/cris/arch-v32/mach-a3/dram_init.S')
| -rw-r--r-- | arch/cris/arch-v32/mach-a3/dram_init.S | 16 |
1 files changed, 15 insertions, 1 deletions
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S index 94d6b41cb29..ec8648be32d 100644 --- a/arch/cris/arch-v32/mach-a3/dram_init.S +++ b/arch/cris/arch-v32/mach-a3/dram_init.S @@ -24,11 +24,21 @@ ;; Refer to ddr2 MDS for initialization sequence + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + ; Start clock move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0 move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1 move.d $r1, [$r0] + ; 2. Wait 200us + move.d 10000, $r2 +1: bne 1b + subq 1, $r2 + ; Reset phy and start calibration move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0 move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \ @@ -52,6 +62,10 @@ do_cmd: lslq 16, $r1 or.d $r3, $r1 move.d $r1, [$r0] + ; 2. Wait 200us + move.d 10000, $r4 +1: bne 1b + subq 1, $r4 cmp.d sdram_commands_end, $r2 blo command_loop nop @@ -63,7 +77,7 @@ do_cmd: ; Set latency move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0 - move.d 0x13, $r1 + move.d CONFIG_ETRAX_DDR2_LATENCY, $r1 move.d $r1, [$r0] ; Set configuration |