1 files changed, 134 insertions, 0 deletions
diff --git a/arch/cris/arch-v32/vmlinux.lds.S b/arch/cris/arch-v32/vmlinux.lds.S
new file mode 100644
index 00000000000..adb94605d92
--- /dev/null
+++ b/arch/cris/arch-v32/vmlinux.lds.S
@@ -0,0 +1,134 @@
+/* ld script to make the Linux/CRIS kernel
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * It is VERY DANGEROUS to fiddle around with the symbols in this
+ * script. It is for example quite vital that all generated sections
+ * that are used are actually named here, otherwise the linker will
+ * put them at the end, where the init stuff is which is FREED after
+ * the kernel has booted.
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+jiffies = jiffies_64;
+SECTIONS
+{
+	. = DRAM_VIRTUAL_BASE;
+	dram_start = .;
+	ebp_start = .;
+
+	/* The boot section is only necessary until the VCS top level testbench */
+	/* includes both flash and DRAM. */
+	.boot : { *(.boot) }
+
+	. = DRAM_VIRTUAL_BASE + 0x4000;		/* See head.S and pages reserved at the start. */
+
+	_text = .;		/* Text and read-only data. */
+	text_start = .;		/* Lots of aliases. */
+	_stext = .;
+	__stext = .;
+	.text : {
+		*(.text)
+		SCHED_TEXT
+		LOCK_TEXT
+		*(.fixup)
+		*(.text.__*)
+	}
+
+	_etext = . ;		/* End of text section. */
+	__etext = .;
+
+	. = ALIGN(4);		/* Exception table. */
+  	__start___ex_table = .;
+  	__ex_table : { *(__ex_table) }
+  	__stop___ex_table = .;
+
+	RODATA
+
+	. = ALIGN (4);
+	___data_start = . ;
+	__Sdata = . ;
+	.data : {                     /* Data */
+		*(.data)
+	}
+	__edata = . ;		/* End of data section. */
+	_edata = . ;
+
+	. = ALIGN(8192);	/* init_task and stack, must be aligned. */
+  	.data.init_task : { *(.data.init_task) }
+
+  	. = ALIGN(8192);	/* Init code and data. */
+  	__init_begin = .;
+	.init.text : {
+		   _sinittext = .;
+		   *(.init.text)
+		   _einittext = .;
+	}
+  	.init.data : { *(.init.data) }
+  	. = ALIGN(16);
+  	__setup_start = .;
+  	.init.setup : { *(.init.setup) }
+  	__setup_end = .;
+	__start___param = .;
+	__param : { *(__param) }
+	__stop___param = .;
+  	.initcall.init : {
+		__initcall_start = .;
+		*(.initcall1.init);
+		*(.initcall2.init);
+		*(.initcall3.init);
+		*(.initcall4.init);
+		*(.initcall5.init);
+		*(.initcall6.init);
+		*(.initcall7.init);
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+	SECURITY_INIT
+
+	__per_cpu_start = .;
+	.data.percpu  : { *(.data.percpu) }
+	__per_cpu_end = .;
+
+	.init.ramfs : {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+		/*
+		 * We fill to the next page, so we can discard all init
+		 * pages without needing to consider what payload might be
+		 * appended to the kernel image.
+		 */
+		FILL (0);
+		. = ALIGN (8192);
+	}
+
+	__vmlinux_end = .;	/* Last address of the physical file. */
+  	__init_end = .;
+
+	__data_end = . ;	/* Move to _edata? */
+	__bss_start = .;	/* BSS. */
+	.bss : {
+		*(COMMON)
+		*(.bss)
+	}
+
+	. =  ALIGN (0x20);
+	_end = .;
+	__end = .;
+
+	/* Sections to be discarded */
+  	/DISCARD/ : {
+        	*(.text.exit)
+        	*(.data.exit)
+		*(.exitcall.exit)
+        }
+
+	dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024;
+}