diff options
Diffstat (limited to 'arch/cris')
-rw-r--r-- | arch/cris/Kconfig | 8 | ||||
-rw-r--r-- | arch/cris/arch-v10/Kconfig | 2 | ||||
-rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 2 | ||||
-rw-r--r-- | arch/cris/arch-v10/drivers/eeprom.c | 6 | ||||
-rw-r--r-- | arch/cris/arch-v10/drivers/i2c.c | 2 | ||||
-rw-r--r-- | arch/cris/arch-v10/kernel/kgdb.c | 2 | ||||
-rw-r--r-- | arch/cris/arch-v10/lib/old_checksum.c | 62 | ||||
-rw-r--r-- | arch/cris/arch-v32/drivers/Kconfig | 8 | ||||
-rw-r--r-- | arch/cris/arch-v32/drivers/cryptocop.c | 1 | ||||
-rw-r--r-- | arch/cris/arch-v32/drivers/sync_serial.c | 8 | ||||
-rw-r--r-- | arch/cris/mm/fault.c | 2 |
11 files changed, 56 insertions, 47 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 6a1238a29d6..3474309e049 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -16,6 +16,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + config GENERIC_FIND_NEXT_BIT bool default y diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 44eb1b9accb..c7ea9efd010 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES depends on ETRAX_ARCH_V10 default "95a6" help - Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a + Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a good choice for most Axis products... config ETRAX_DEF_R_BUS_CONFIG diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 734d5f3a530..e7e724bc0ba 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE default "0" help This controls the initial value of the trickle charge register. - 0 = disabled (use this if you are unsure or have a non rechargable battery) + 0 = disabled (use this if you are unsure or have a non rechargeable battery) Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 6e1f191a71e..284ebfda03f 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -1,7 +1,7 @@ /*!***************************************************************************** *! -*! Implements an interface for i2c compatible eeproms to run under linux. -*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by +*! Implements an interface for i2c compatible eeproms to run under Linux. +*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by *! Johan.Adolfsson@axis.com *! *! Probing results: @@ -51,7 +51,7 @@ *! Revision 1.8 2001/06/15 13:24:29 jonashg *! * Added verification of pointers from userspace in read and write. *! * Made busy counter volatile. -*! * Added define for inital write delay. +*! * Added define for initial write delay. *! * Removed warnings by using loff_t instead of unsigned long. *! *! Revision 1.7 2001/06/14 15:26:54 jonashg diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 6114596c3b3..092c724a645 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -47,7 +47,7 @@ *! Update Port B register and shadow even when running with hardware support *! to avoid glitches when reading bits *! Never set direction to out in i2c_inbyte -*! Removed incorrect clock togling at end of i2c_inbyte +*! Removed incorrect clock toggling at end of i2c_inbyte *! *! Revision 1.8 2002/08/13 06:31:53 starvik *! Made SDA and SCL line configurable diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 34528da9881..07628a13c6c 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -33,7 +33,7 @@ *! *! Revision 1.2 2002/11/19 14:35:24 starvik *! Changes from linux 2.4 -*! Changed struct initializer syntax to the currently prefered notation +*! Changed struct initializer syntax to the currently preferred notation *! *! Revision 1.1 2001/12/17 13:59:27 bjornw *! Initial revision diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c index 22a6f0aa9ce..497634a6482 100644 --- a/arch/cris/arch-v10/lib/old_checksum.c +++ b/arch/cris/arch-v10/lib/old_checksum.c @@ -47,39 +47,41 @@ #include <asm/delay.h> -unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum) +__wsum csum_partial(const void *p, int len, __wsum __sum) { - /* - * Experiments with ethernet and slip connections show that buff - * is aligned on either a 2-byte or 4-byte boundary. - */ - const unsigned char *endMarker = buff + len; - const unsigned char *marker = endMarker - (len % 16); + u32 sum = (__force u32)__sum; + const u16 *buff = p; + /* + * Experiments with ethernet and slip connections show that buff + * is aligned on either a 2-byte or 4-byte boundary. + */ + const void *endMarker = p + len; + const void *marker = endMarker - (len % 16); #if 0 - if((int)buff & 0x3) - printk("unaligned buff %p\n", buff); - __delay(900); /* extra delay of 90 us to test performance hit */ + if((int)buff & 0x3) + printk("unaligned buff %p\n", buff); + __delay(900); /* extra delay of 90 us to test performance hit */ #endif - BITON; - while (buff < marker) { - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - sum += *((unsigned short *)buff)++; - } - marker = endMarker - (len % 2); - while(buff < marker) { - sum += *((unsigned short *)buff)++; - } - if(endMarker - buff > 0) { - sum += *buff; /* add extra byte seperately */ - } - BITOFF; - return(sum); + BITON; + while (buff < marker) { + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + sum += *buff++; + } + marker = endMarker - (len % 2); + while (buff < marker) + sum += *buff++; + + if (endMarker > buff) + sum += *(const u8 *)buff; /* add extra byte seperately */ + + BITOFF; + return (__force __wsum)sum; } EXPORT_SYMBOL(csum_partial); diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index a33097f9536..f64624fc450 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN help Enables the DMA7 input channel for ser0 (ttyS0). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN help Enables the DMA5 input channel for ser1 (ttyS1). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want this on, unless you use the DMA channel for something else. @@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN help Enables the DMA3 input channel for ser2 (ttyS2). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN help Enables the DMA9 input channel for ser3 (ttyS3). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ba096ebb0b1..2449637e6fc 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -2051,7 +2051,6 @@ static void cryptocop_job_queue_close(void) spin_lock_irqsave(&cryptocop_process_lock, process_flags); /* Empty the job queue. */ - spin_lock_irqsave(&cryptocop_process_lock, process_flags); for (i = 0; i < cryptocop_prio_no_prios; i++){ if (!list_empty(&(cryptocop_job_queues[i].jobs))){ list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) { diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index e067806b220..424eb0eb1cd 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -504,7 +504,7 @@ static int sync_serial_release(struct inode *inode, struct file *file) static unsigned int sync_serial_poll(struct file *file, poll_table *wait) { - int dev = iminor(file->f_dentry->d_inode); + int dev = iminor(file->f_path.dentry->d_inode); unsigned int mask = 0; sync_port* port; DEBUGPOLL( static unsigned int prev_mask = 0; ); @@ -531,7 +531,7 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int return_val = 0; - int dev = iminor(file->f_dentry->d_inode); + int dev = iminor(file->f_path.dentry->d_inode); sync_port* port; reg_sser_rw_tr_cfg tr_cfg; reg_sser_rw_rec_cfg rec_cfg; @@ -789,7 +789,7 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, static ssize_t sync_serial_write(struct file * file, const char * buf, size_t count, loff_t *ppos) { - int dev = iminor(file->f_dentry->d_inode); + int dev = iminor(file->f_path.dentry->d_inode); DECLARE_WAITQUEUE(wait, current); sync_port *port; unsigned long c, c1; @@ -919,7 +919,7 @@ static ssize_t sync_serial_write(struct file * file, const char * buf, static ssize_t sync_serial_read(struct file * file, char * buf, size_t count, loff_t *ppos) { - int dev = iminor(file->f_dentry->d_inode); + int dev = iminor(file->f_path.dentry->d_inode); int avail; sync_port *port; unsigned char* start; diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 934c51078cc..c73e91f1299 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -232,7 +232,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, * context, we must not take the fault.. */ - if (in_interrupt() || !mm) + if (in_atomic() || !mm) goto no_context; down_read(&mm->mmap_sem); |